From: Sven Eckelmann Date: Mon, 19 Mar 2018 20:10:14 +0000 (+0100) Subject: ipq40xx: Remove phy reset gpio from Cisco Meraki MR33 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1fcd625c0a8d6efb851583ae518e8621497c2eb4;p=openwrt%2Fstaging%2Fjogo.git ipq40xx: Remove phy reset gpio from Cisco Meraki MR33 There is currently no code to read the phy reset gpios for the ethernet PHY. It would also have been better to use the more common name "phy-reset-gpios" for this property. Signed-off-by: Sven Eckelmann --- diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts index ef6230126f..a709ae96bd 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts @@ -60,7 +60,6 @@ status = "okay"; pinctrl-0 = <&mdio_pins>; pinctrl-names = "default"; - phy-reset-gpio = <&tlmm 47 GPIO_ACTIVE_HIGH>; /delete-node/ ethernet-phy@0; /delete-node/ ethernet-phy@2; /delete-node/ ethernet-phy@3;