From: Felix Fietkau Date: Mon, 5 Dec 2011 14:20:51 +0000 (+0000) Subject: ar71xx: add preliminary support for wzr-hp-g450h X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1f809532dede86733e24007e562181f428f55e23;p=openwrt%2Fstaging%2F981213.git ar71xx: add preliminary support for wzr-hp-g450h SVN-Revision: 29441 --- diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 22e951d143..bb6ceb7066 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -229,6 +229,9 @@ ar71xx_board_detect() { *WZR-HP-G300NH) name="wzr-hp-g300nh" ;; + *WZR-HP-G450H) + name="wzr-hp-g450h" + ;; *WHR-HP-G300N) name="whr-hp-g300n" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 1de9077158..8b69bc59a6 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -98,6 +98,7 @@ platform_check_image() { nanostation-m | \ rocket-m | \ wzr-hp-g300nh | \ + wzr-hp-g450h | \ wzr-hp-ag300h | \ whr-g301n | \ whr-hp-g300n | \ diff --git a/target/linux/ar71xx/config-2.6.39 b/target/linux/ar71xx/config-2.6.39 index 8cca8e2000..068a9387e3 100644 --- a/target/linux/ar71xx/config-2.6.39 +++ b/target/linux/ar71xx/config-2.6.39 @@ -54,6 +54,7 @@ CONFIG_AR71XX_MACH_WRT160NL=y CONFIG_AR71XX_MACH_WRT400N=y CONFIG_AR71XX_MACH_WZR_HP_AG300H=y CONFIG_AR71XX_MACH_WZR_HP_G300NH=y +CONFIG_AR71XX_MACH_WZR_HP_G450H=y CONFIG_AR71XX_MACH_ZCN_1523H=y CONFIG_AR71XX_NVRAM=y CONFIG_AR71XX_PCI_ATH9K_FIXUP=y diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig index f80974b361..13d18030a8 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig @@ -136,6 +136,15 @@ config AR71XX_MACH_WZR_HP_AG300H select AR71XX_DEV_LEDS_GPIO select AR71XX_DEV_USB +config AR71XX_MACH_WZR_HP_G450H + bool "Buffalo WZR-HP-G450H board support" + select SOC_AR724X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + config AR71XX_MACH_WZR_HP_G300NH bool "Buffalo WZR-HP-G300NH board support" select SOC_AR913X diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile index d64a4eac0a..2805f1973b 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile @@ -69,4 +69,5 @@ obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o obj-$(CONFIG_AR71XX_MACH_WRT400N) += mach-wrt400n.o obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o obj-$(CONFIG_AR71XX_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o +obj-$(CONFIG_AR71XX_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o obj-$(CONFIG_AR71XX_MACH_ZCN_1523H) += mach-zcn-1523h.o diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g450h.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g450h.c new file mode 100644 index 0000000000..ab6c37c94f --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g450h.c @@ -0,0 +1,85 @@ +/* + * Atheros G450 board support + * + * Copyright (C) 2010 Felix Fietkau + * Copyright (C) 2008-2009 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wzrhpg450h_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x0040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x0040000, + .size = 0x0010000, + }, { + .name = "ART", + .offset = 0x0050000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "uImage", + .offset = 0x0060000, + .size = 0x0100000, + }, { + .name = "rootfs", + .offset = 0x0160000, + .size = 0x1e80000, + }, { + .name = "user_property", + .offset = 0x1fe0000, + .size = 0x0020000, + }, { + .name = "firmware", + .offset = 0x0060000, + .size = 0x1f80000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data wzrhpg450h_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = wzrhpg450h_partitions, + .nr_parts = ARRAY_SIZE(wzrhpg450h_partitions), +#endif +}; + +static void __init wzrhpg450h_init(void) +{ + u8 *ee = (u8 *) KSEG1ADDR(0x1f051000); + u8 *mac = (u8 *) ee + 2; + + ar71xx_add_device_m25p80_multi(&wzrhpg450h_flash_data); + + ar71xx_add_device_mdio(0, ~BIT(0)); + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_data.phy_mask = BIT(0); + + ar71xx_add_device_eth(0); + + ap91_pci_init(ee, NULL); +} + +MIPS_MACHINE(AR71XX_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H", + wzrhpg450h_init); diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h index d755a7ae5f..3a9e97396a 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h @@ -76,6 +76,7 @@ enum ar71xx_mach_type { AR71XX_MACH_WRT400N, /* Linksys WRT400N */ AR71XX_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ + AR71XX_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ }; diff --git a/target/linux/ar71xx/generic/profiles/buffalo.mk b/target/linux/ar71xx/generic/profiles/buffalo.mk index 74530b5e75..e975eb8ad9 100644 --- a/target/linux/ar71xx/generic/profiles/buffalo.mk +++ b/target/linux/ar71xx/generic/profiles/buffalo.mk @@ -27,6 +27,17 @@ endef $(eval $(call Profile,WZRHPAG300H)) +define Profile/WZRHPG450H + NAME:=Buffalo WZR-HP-G450H + PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev +endef + +define Profile/WZRHPG450H/Description + Package set optimized for the Buffalo WZR-HP-G450H +endef + +$(eval $(call Profile,WZRHPG450H)) + define Profile/WHRG301N NAME:=Buffalo WHR-G301N PACKAGES:= diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 2394e99380..ddbbafa327 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -807,6 +807,11 @@ define Image/Build/Profile/WZRHPAG300H $(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG30XNH,wzr-hp-ag300h,$(wzrhpag300h_cmdline),WZR-HP-AG300H) endef +wzrhpg450h_cmdline=board=WZR-HP-G450H console=ttyS0,115200 +define Image/Build/Profile/WZRHPG450H + $(call Image/Build/Template/$(fs_64k)/$(1),WZRHPG30XNH,wzr-hp-g450h,$(wzrhpg450h_cmdline),WZR-HP-AG450H) +endef + zcn1523h28_cmdline=board=ZCN-1523H-2 console=ttyS0,115200 define Image/Build/Profile/ZCN1523H28 $(call Image/Build/Template/$(fs_64k)/$(1),Zcomax,zcn-1523h-2-8,$(zcn1523h28_cmdline)) @@ -875,6 +880,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/WHRHPGN,$(1)) $(call Image/Build/Profile/WZRHPG300NH,$(1)) $(call Image/Build/Profile/WZRHPAG300H,$(1)) + $(call Image/Build/Profile/WZRHPG450H,$(1)) $(call Image/Build/Profile/ZCN1523H28,$(1)) $(call Image/Build/Profile/ZCN1523H516,$(1)) endef