From: Linus Walleij Date: Fri, 11 May 2018 17:16:48 +0000 (+0200) Subject: gemini: Augment DIR-685 device tree for RTL8366RB X-Git-Tag: v18.06.0-rc1~200 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1f56417e6b422e040783e70344b162bbfaa59bc4;p=openwrt%2Fstaging%2Fpepe2k.git gemini: Augment DIR-685 device tree for RTL8366RB This makes the ethernet and RTL8366RB come up on the D-Link DIR-685. Signed-off-by: Linus Walleij --- diff --git a/target/linux/gemini/patches-4.14/0905-arm-dts-gemini-dlink-dir-685-add-rtl8366rb.patch b/target/linux/gemini/patches-4.14/0905-arm-dts-gemini-dlink-dir-685-add-rtl8366rb.patch index 42501225be..f01c272e40 100644 --- a/target/linux/gemini/patches-4.14/0905-arm-dts-gemini-dlink-dir-685-add-rtl8366rb.patch +++ b/target/linux/gemini/patches-4.14/0905-arm-dts-gemini-dlink-dir-685-add-rtl8366rb.patch @@ -1,6 +1,8 @@ +diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts +index 840f4a32f37c..456556f52bc7 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts -@@ -86,6 +86,12 @@ +@@ -87,6 +87,12 @@ }; }; @@ -13,3 +15,70 @@ leds { compatible = "gpio-leds"; led-wps { +@@ -249,6 +255,47 @@ + groups = "gpio1bgrp"; + }; + }; ++ pinctrl-gmii { ++ mux { ++ function = "gmii"; ++ groups = "gmii_gmac0_grp"; ++ }; ++ conf0 { ++ pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV"; ++ skew-delay = <0>; ++ }; ++ conf1 { ++ pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC"; ++ skew-delay = <15>; ++ }; ++ conf2 { ++ pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN"; ++ skew-delay = <7>; ++ }; ++ conf3 { ++ pins = "U8 GMAC0 TXC"; ++ skew-delay = <11>; ++ }; ++ conf4 { ++ pins = "V11 GMAC1 TXC"; ++ skew-delay = <10>; ++ }; ++ conf5 { ++ pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1", ++ "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3", ++ "T7 GMAC0 TXD0", "U6 GMAC0 TXD1", ++ "V7 GMAC0 TXD2", "U7 GMAC0 TXD3", ++ "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1", ++ "T11 GMAC1 RXD2", "W12 GMAC1 RXD3", ++ "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1", ++ "W10 GMAC1 TXD2", "T9 GMAC1 TXD3"; ++ skew-delay = <7>; ++ }; ++ conf6 { ++ groups = "gmii_gmac0_grp"; ++ drive-strength = <16>; ++ }; ++ }; + }; + }; + +@@ -290,6 +337,18 @@ + <0x6000 0 0 4 &pci_intc 2>; + }; + ++ ethernet@60000000 { ++ status = "okay"; ++ ++ ethernet-port@0 { ++ phy-mode = "rgmii"; ++ // phy-handle = <&phy0>; ++ }; ++ ethernet-port@1 { ++ /* Not used in this platform */ ++ }; ++ }; ++ + ata@63000000 { + status = "okay"; + };