From: Hauke Mehrtens Date: Sat, 30 Jun 2012 13:16:13 +0000 (+0200) Subject: brcmsmac: use chip and package id constants from bcma X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1ef1a57de7078edc2504d156be606249cc32c199;p=openwrt%2Fstaging%2Fblogic.git brcmsmac: use chip and package id constants from bcma This patch depends on addin the chip IDs to bcma done in this commit in my pending patch series for bcma. Author: Hauke Mehrtens Date: Sun Jun 3 18:17:57 2012 +0200 bcma: add constants for chip ids Acked-by: Arend van Spriel Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h index 3a5358c5b055..89562c1fbf49 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h @@ -88,16 +88,6 @@ #define CLKD_OTP 0x000f0000 #define CLKD_OTP_SHIFT 16 -/* Package IDs */ -#define BCM4717_PKG_ID 9 /* 4717 package id */ -#define BCM4718_PKG_ID 10 /* 4718 package id */ -#define BCM43224_FAB_SMIC 0xa /* the chip is manufactured by SMIC */ - -/* these are router chips */ -#define BCM4716_CHIP_ID 0x4716 /* 4716 chipcommon chipid */ -#define BCM47162_CHIP_ID 47162 /* 47162 chipcommon chipid */ -#define BCM4748_CHIP_ID 0x4748 /* 4716 chipcommon chipid (OTP, RBBU) */ - /* dynamic clock control defines */ #define LPOMINFREQ 25000 /* low power oscillator min */ #define LPOMAXFREQ 43000 /* low power oscillator max */ diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 8776fbc8dcf1..478b374b65e5 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -2126,8 +2126,8 @@ void brcms_b_switch_macfreq(struct brcms_hardware *wlc_hw, u8 spurmode) { struct bcma_device *core = wlc_hw->d11core; - if ((ai_get_chip_id(wlc_hw->sih) == BCM43224_CHIP_ID) || - (ai_get_chip_id(wlc_hw->sih) == BCM43225_CHIP_ID)) { + if ((ai_get_chip_id(wlc_hw->sih) == BCMA_CHIP_ID_BCM43224) || + (ai_get_chip_id(wlc_hw->sih) == BCMA_CHIP_ID_BCM43225)) { if (spurmode == WL_SPURAVOID_ON2) { /* 126Mhz */ bcma_write16(core, D11REGOFFS(tsf_clk_frac_l), 0x2082); bcma_write16(core, D11REGOFFS(tsf_clk_frac_h), 0x8); @@ -2791,7 +2791,7 @@ void brcms_b_core_phypll_ctl(struct brcms_hardware *wlc_hw, bool on) tmp = 0; if (on) { - if ((ai_get_chip_id(wlc_hw->sih) == BCM4313_CHIP_ID)) { + if ((ai_get_chip_id(wlc_hw->sih) == BCMA_CHIP_ID_BCM4313)) { bcma_set32(core, D11REGOFFS(clk_ctl_st), CCS_ERSRC_REQ_HT | CCS_ERSRC_REQ_D11PLL | @@ -4528,7 +4528,7 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, else wlc_hw->_nbands = 1; - if ((ai_get_chip_id(wlc_hw->sih) == BCM43225_CHIP_ID)) + if ((ai_get_chip_id(wlc_hw->sih) == BCMA_CHIP_ID_BCM43225)) wlc_hw->_nbands = 1; /* BMAC_NOTE: remove init of pub values when brcms_c_attach() @@ -5036,7 +5036,7 @@ static void brcms_b_hw_up(struct brcms_hardware *wlc_hw) wlc_hw->wlc->pub->hw_up = true; if ((wlc_hw->boardflags & BFL_FEM) - && (ai_get_chip_id(wlc_hw->sih) == BCM4313_CHIP_ID)) { + && (ai_get_chip_id(wlc_hw->sih) == BCMA_CHIP_ID_BCM4313)) { if (! (wlc_hw->boardrev >= 0x1250 && (wlc_hw->boardflags & BFL_FEM_BT))) @@ -5130,7 +5130,7 @@ int brcms_c_up(struct brcms_c_info *wlc) } if ((wlc->pub->boardflags & BFL_FEM) - && (ai_get_chip_id(wlc->hw->sih) == BCM4313_CHIP_ID)) { + && (ai_get_chip_id(wlc->hw->sih) == BCMA_CHIP_ID_BCM4313)) { if (wlc->pub->boardrev >= 0x1250 && (wlc->pub->boardflags & BFL_FEM_BT)) brcms_b_mhf(wlc->hw, MHF5, MHF5_4313_GPIOCTRL, diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_cmn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_cmn.c index 264f8c4c703d..d16cbecdfc6c 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_cmn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_cmn.c @@ -837,7 +837,7 @@ wlc_phy_table_addr(struct brcms_phy *pi, uint tbl_id, uint tbl_offset, pi->tbl_data_hi = tblDataHi; pi->tbl_data_lo = tblDataLo; - if (pi->sh->chip == BCM43224_CHIP_ID && + if (pi->sh->chip == BCMA_CHIP_ID_BCM43224 && pi->sh->chiprev == 1) { pi->tbl_addr = tblAddr; pi->tbl_save_id = tbl_id; @@ -847,7 +847,7 @@ wlc_phy_table_addr(struct brcms_phy *pi, uint tbl_id, uint tbl_offset, void wlc_phy_table_data_write(struct brcms_phy *pi, uint width, u32 val) { - if ((pi->sh->chip == BCM43224_CHIP_ID) && + if ((pi->sh->chip == BCMA_CHIP_ID_BCM43224) && (pi->sh->chiprev == 1) && (pi->tbl_save_id == NPHY_TBL_ID_ANTSWCTRLLUT)) { read_phy_reg(pi, pi->tbl_data_lo); @@ -881,7 +881,7 @@ wlc_phy_write_table(struct brcms_phy *pi, const struct phytbl_info *ptbl_info, for (idx = 0; idx < ptbl_info->tbl_len; idx++) { - if ((pi->sh->chip == BCM43224_CHIP_ID) && + if ((pi->sh->chip == BCMA_CHIP_ID_BCM43224) && (pi->sh->chiprev == 1) && (tbl_id == NPHY_TBL_ID_ANTSWCTRLLUT)) { read_phy_reg(pi, tblDataLo); @@ -918,7 +918,7 @@ wlc_phy_read_table(struct brcms_phy *pi, const struct phytbl_info *ptbl_info, for (idx = 0; idx < ptbl_info->tbl_len; idx++) { - if ((pi->sh->chip == BCM43224_CHIP_ID) && + if ((pi->sh->chip == BCMA_CHIP_ID_BCM43224) && (pi->sh->chiprev == 1)) { (void)read_phy_reg(pi, tblDataLo); @@ -2894,7 +2894,7 @@ const u8 *wlc_phy_get_ofdm_rate_lookup(void) void wlc_lcnphy_epa_switch(struct brcms_phy *pi, bool mode) { - if ((pi->sh->chip == BCM4313_CHIP_ID) && + if ((pi->sh->chip == BCMA_CHIP_ID_BCM4313) && (pi->sh->boardflags & BFL_FEM)) { if (mode) { u16 txant = 0; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c index a4ae93ebe36e..14da744e666a 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c @@ -19309,8 +19309,8 @@ void wlc_phy_init_nphy(struct brcms_phy *pi) pi->measure_hold |= PHY_HOLD_FOR_NOT_ASSOC; if ((ISNPHY(pi)) && (NREV_GE(pi->pubpi.phy_rev, 5)) && - ((pi->sh->chippkg == BCM4717_PKG_ID) || - (pi->sh->chippkg == BCM4718_PKG_ID))) { + ((pi->sh->chippkg == BCMA_PKG_ID_BCM4717) || + (pi->sh->chippkg == BCMA_PKG_ID_BCM4718))) { if ((pi->sh->boardflags & BFL_EXTLNA) && (CHSPEC_IS2G(pi->radio_chanspec))) ai_cc_reg(pi->sh->sih, @@ -20751,11 +20751,11 @@ wlc_phy_chanspec_radio2056_setup(struct brcms_phy *pi, cascbias = 0x20; if ((pi->sh->chip == - BCM43224_CHIP_ID) + BCMA_CHIP_ID_BCM43224) || (pi->sh->chip == - BCM43225_CHIP_ID)) { + BCMA_CHIP_ID_BCM43225)) { if (pi->sh->chippkg == - BCM43224_FAB_SMIC) { + BCMA_PKG_ID_BCM43224_FAB_SMIC) { bias = 0x2a; cascbias = 0x38; } @@ -20863,9 +20863,9 @@ wlc_phy_chanspec_radio2056_setup(struct brcms_phy *pi, cascbias = 0x30; - if ((pi->sh->chip == BCM43224_CHIP_ID) || - (pi->sh->chip == BCM43225_CHIP_ID)) { - if (pi->sh->chippkg == BCM43224_FAB_SMIC) + if ((pi->sh->chip == BCMA_CHIP_ID_BCM43224) || + (pi->sh->chip == BCMA_CHIP_ID_BCM43225)) { + if (pi->sh->chippkg == BCMA_PKG_ID_BCM43224_FAB_SMIC) cascbias = 0x35; } @@ -21193,8 +21193,8 @@ wlc_phy_chanspec_nphy_setup(struct brcms_phy *pi, u16 chanspec, bcma_pmu_spuravoid_pllupdate(&sii->icbus->drv_cc, spuravoid); wlapi_bmac_core_phypll_ctl(pi->sh->physhim, true); - if ((pi->sh->chip == BCM43224_CHIP_ID) || - (pi->sh->chip == BCM43225_CHIP_ID)) { + if ((pi->sh->chip == BCMA_CHIP_ID_BCM43224) || + (pi->sh->chip == BCMA_CHIP_ID_BCM43225)) { if (spuravoid == 1) { bcma_write16(pi->d11core, D11REGOFFS(tsf_clk_frac_l), diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pmu.c b/drivers/net/wireless/brcm80211/brcmsmac/pmu.c index 6b4344f1d2e3..7e9df566c733 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/pmu.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/pmu.c @@ -103,9 +103,9 @@ u16 si_pmu_fast_pwrup_delay(struct si_pub *sih) uint delay = PMU_MAX_TRANSITION_DLY; switch (ai_get_chip_id(sih)) { - case BCM43224_CHIP_ID: - case BCM43225_CHIP_ID: - case BCM4313_CHIP_ID: + case BCMA_CHIP_ID_BCM43224: + case BCMA_CHIP_ID_BCM43225: + case BCMA_CHIP_ID_BCM4313: delay = 3700; break; default: @@ -156,9 +156,9 @@ u32 si_pmu_alp_clock(struct si_pub *sih) return clock; switch (ai_get_chip_id(sih)) { - case BCM43224_CHIP_ID: - case BCM43225_CHIP_ID: - case BCM4313_CHIP_ID: + case BCMA_CHIP_ID_BCM43224: + case BCMA_CHIP_ID_BCM43225: + case BCMA_CHIP_ID_BCM4313: /* always 20Mhz */ clock = 20000 * 1000; break;