From: Zoltan HERPAI Date: Mon, 3 Aug 2020 21:07:21 +0000 (+0200) Subject: ath79: add support for Qualcomm AP143 reference boards X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1eb481206dd4173f9e19f83e4b05892cd1035c74;p=openwrt%2Fstaging%2Fneocturne.git ath79: add support for Qualcomm AP143 reference boards Specifications: SoC: QCA9533 DRAM: 32Mb DDR1 Flash: 8/16Mb SPI-NOR LAN: 4x 10/100Mbps via AR8229 switch (integrated into SoC) on GMII WAN: 1x 10/100Mbps via MII WLAN: QCA9530 USB: 1x 2.0 UART: standard QCA UART header JTAG: yes Button: 1x WPS, 1x reset LEDs: 8x LEDs A version with 4Mb flash is also available, but due to lack of enough space it's not supported. As the original flash layout does not provide enough space for the kernel (1472k), the firmware uses OKLI and concat flash to overcome the limitation without changing the boot address of the bootloaders. Installation: 1. Original bootloader Connect the board to ethernet Set up a server with an IP address of 192.168.1.10 Make the openwrt-ath79-generic-qca_ap143-8m-squashfs-factory.bin available via TFTP tftpboot 0x80060000 openwrt-ath79-generic-qca_ap143-8m-squashfs-factory.bin erase 0x9f050000 +$filesize cp.b $fileaddr 0x9f050000 $filesize Reboot the board. 2. pepe2k's u-boot_mod Connect the board to ethernet Set up a server with an IP address of 192.168.1.10 Make the openwrt-ath79-generic-qca_ap143-8m-squashfs-factory.bin available via TFTP, as "firmware.bin" run fw_upg Reboot the board. For the 16M version of the board, please use openwrt-ath79-generic-qca_ap143-16m-squashfs-factory.bin Signed-off-by: Zoltan HERPAI [use fwconcatX names, drop redundant uart status, fix IMAGE_SIZE, set up IMAGE/factory.bin without metadata] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ath79/dts/qca9533_qca_ap143-16m.dts b/target/linux/ath79/dts/qca9533_qca_ap143-16m.dts new file mode 100644 index 0000000000..31e61de175 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_qca_ap143-16m.dts @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9533_qca_ap143.dtsi" + +/ { + model = "Qualcomm Atheros AP143 (16M) reference board"; + compatible = "qca,ap143-16m", "qca,qca9533"; + + virtual_flash { + compatible = "mtd-concat"; + devices = <&fwconcat0 &fwconcat1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x0>; + label = "firmware"; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = ; + }; + }; + }; +}; + +&partitions { + fwconcat0: partition@50000 { + label = "fwconcat0"; + reg = <0x050000 0xe30000>; + }; + + partition@e80000 { + label = "loader"; + reg = <0xe80000 0x10000>; + }; + + fwconcat1: partition@e90000 { + label = "fwconcat1"; + reg = <0xe90000 0x160000>; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; +}; diff --git a/target/linux/ath79/dts/qca9533_qca_ap143-8m.dts b/target/linux/ath79/dts/qca9533_qca_ap143-8m.dts new file mode 100644 index 0000000000..bdb93420b5 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_qca_ap143-8m.dts @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9533_qca_ap143.dtsi" + +/ { + model = "Qualcomm Atheros AP143 (8M) reference board"; + compatible = "qca,ap143-8m", "qca,qca9533"; + + virtual_flash { + compatible = "mtd-concat"; + devices = <&fwconcat0 &fwconcat1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x0>; + label = "firmware"; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = ; + }; + }; + }; +}; + +&partitions { + fwconcat0: partition@50000 { + label = "fwconcat0"; + reg = <0x050000 0x630000>; + }; + + partition@680000 { + label = "loader"; + reg = <0x680000 0x10000>; + }; + + fwconcat1: partition@690000 { + label = "fwconcat1"; + reg = <0x690000 0x160000>; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; +}; diff --git a/target/linux/ath79/dts/qca9533_qca_ap143.dtsi b/target/linux/ath79/dts/qca9533_qca_ap143.dtsi new file mode 100644 index 0000000000..95a24175a5 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_qca_ap143.dtsi @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca953x.dtsi" + +#include +#include +#include + +/ { + aliases { + led-boot = &led_wps; + led-failsafe = &led_wps; + led-running = &led_wps; + led-upgrade = &led_wps; + }; + + leds { + compatible = "gpio-leds"; + + wan { + label = "green:wan"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "green:wlan"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + lan1 { + label = "green:lan1"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "green:lan2"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + lan3 { + label = "green:lan3"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + lan4 { + label = "green:lan4"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + led_wps: wps { + label = "green:wps"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "WPS button"; + linux,code = ; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + + phy-handle = <&swphy4>; +}; + +ð1 { + mtd-mac-address = <&art 0x6>; + + gmac-config { + device = <&gmac>; + }; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; + +&usb0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 1990353394..8ead3ec0a3 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -260,6 +260,14 @@ pcs,cr3000) ucidef_set_led_switch "lan3" "LAN3" "blue:lan3" "switch0" "0x10" ucidef_set_led_switch "lan4" "LAN4" "blue:lan4" "switch0" "0x02" ;; +qca,ap143-8m|\ +qca,ap143-16m) + ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" + ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x02" + ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x04" + ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x08" + ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x10" + ;; qihoo,c301) ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" ;; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 87aaf0bcad..8ea52af67a 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -192,7 +192,9 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:wan" "2:lan" ;; - comfast,cf-e560ac) + comfast,cf-e560ac|\ + qca,ap143-8m|\ + qca,ap143-16m) ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" diff --git a/target/linux/ath79/image/Makefile b/target/linux/ath79/image/Makefile index 3c126f479e..aa8665fbb2 100644 --- a/target/linux/ath79/image/Makefile +++ b/target/linux/ath79/image/Makefile @@ -48,6 +48,10 @@ define Build/append-loader-okli cat "$(KDIR)/loader-$(word 1,$(1)).$(LOADER_TYPE)" >> "$@" endef +define Build/append-loader-okli-uimage + cat "$(KDIR)/loader-$(word 1,$(1)).uImage" >> "$@" +endef + define Build/relocate-kernel rm -rf $@.relocate $(CP) ../../generic/image/relocate $@.relocate diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 86aae57266..4d3f455e49 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1900,6 +1900,43 @@ define Device/plasmacloud_pa300e endef TARGET_DEVICES += plasmacloud_pa300e +define Device/qca_ap143 + SOC := qca9533 + DEVICE_VENDOR := Qualcomm Atheros + DEVICE_MODEL := AP143 + DEVICE_PACKAGES := kmod-usb2 + SUPPORTED_DEVICES += ap143 + LOADER_TYPE := bin + LOADER_FLASH_OFFS := 0x50000 + KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 + COMPILE := loader-$(1).bin loader-$(1).uImage + COMPILE/loader-$(1).bin := loader-okli-compile + COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \ + uImage lzma +endef + +define Device/qca_ap143-8m + $(Device/qca_ap143) + DEVICE_VARIANT := (8M) + IMAGE_SIZE := 7744k + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | check-size | pad-to 6336k | \ + append-loader-okli-uimage $(1) | pad-to 64k +endef +TARGET_DEVICES += qca_ap143-8m + +define Device/qca_ap143-16m + $(Device/qca_ap143) + DEVICE_VARIANT := (16M) + IMAGE_SIZE := 15936k + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | check-size | pad-to 14528k | \ + append-loader-okli-uimage $(1) | pad-to 64k +endef +TARGET_DEVICES += qca_ap143-16m + define Device/qihoo_c301 $(Device/seama) SOC := ar9344