From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 8 Dec 2015 14:04:39 +0000 (+0200)
Subject: mac80211: reprogram in interface order
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1ea2c864808e525247d2b6cfdb61b93fe669145e;p=openwrt%2Fstaging%2Fblogic.git

mac80211: reprogram in interface order

During reprogramming, mac80211 currently first adds all the channel
contexts, then binds them to the vifs and then goes to reconfigure
all the interfaces. Drivers might, perhaps implicitly, rely on the
operation order for certain things that typically happen within a
single function elsewhere in mac80211. To avoid problems with that,
reorder the code in mac80211's restart/reprogramming to work fully
within the interface loop so that the order of operations is like
in normal operation.

For iwlwifi, this fixes a firmware crash when reprogramming with an
AP/GO interface active.

Reported-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---

diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index f9a8d1401ba4..33344f5a66a8 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1723,6 +1723,27 @@ static void ieee80211_assign_chanctx(struct ieee80211_local *local,
 	mutex_unlock(&local->chanctx_mtx);
 }
 
+static void ieee80211_reconfig_stations(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct sta_info *sta;
+
+	/* add STAs back */
+	mutex_lock(&local->sta_mtx);
+	list_for_each_entry(sta, &local->sta_list, list) {
+		enum ieee80211_sta_state state;
+
+		if (!sta->uploaded || sta->sdata != sdata)
+			continue;
+
+		for (state = IEEE80211_STA_NOTEXIST;
+		     state < sta->sta_state; state++)
+			WARN_ON(drv_sta_state(local, sta->sdata, sta, state,
+					      state + 1));
+	}
+	mutex_unlock(&local->sta_mtx);
+}
+
 int ieee80211_reconfig(struct ieee80211_local *local)
 {
 	struct ieee80211_hw *hw = &local->hw;
@@ -1858,50 +1879,11 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 				WARN_ON(drv_add_chanctx(local, ctx));
 		mutex_unlock(&local->chanctx_mtx);
 
-		list_for_each_entry(sdata, &local->interfaces, list) {
-			if (!ieee80211_sdata_running(sdata))
-				continue;
-			ieee80211_assign_chanctx(local, sdata);
-		}
-
 		sdata = rtnl_dereference(local->monitor_sdata);
 		if (sdata && ieee80211_sdata_running(sdata))
 			ieee80211_assign_chanctx(local, sdata);
 	}
 
-	/* add STAs back */
-	mutex_lock(&local->sta_mtx);
-	list_for_each_entry(sta, &local->sta_list, list) {
-		enum ieee80211_sta_state state;
-
-		if (!sta->uploaded)
-			continue;
-
-		/* AP-mode stations will be added later */
-		if (sta->sdata->vif.type == NL80211_IFTYPE_AP)
-			continue;
-
-		for (state = IEEE80211_STA_NOTEXIST;
-		     state < sta->sta_state; state++)
-			WARN_ON(drv_sta_state(local, sta->sdata, sta, state,
-					      state + 1));
-	}
-	mutex_unlock(&local->sta_mtx);
-
-	/* reconfigure tx conf */
-	if (hw->queues >= IEEE80211_NUM_ACS) {
-		list_for_each_entry(sdata, &local->interfaces, list) {
-			if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
-			    sdata->vif.type == NL80211_IFTYPE_MONITOR ||
-			    !ieee80211_sdata_running(sdata))
-				continue;
-
-			for (i = 0; i < IEEE80211_NUM_ACS; i++)
-				drv_conf_tx(local, sdata, i,
-					    &sdata->tx_conf[i]);
-		}
-	}
-
 	/* reconfigure hardware */
 	ieee80211_hw_config(local, ~0);
 
@@ -1914,6 +1896,22 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		if (!ieee80211_sdata_running(sdata))
 			continue;
 
+		ieee80211_assign_chanctx(local, sdata);
+
+		switch (sdata->vif.type) {
+		case NL80211_IFTYPE_AP_VLAN:
+		case NL80211_IFTYPE_MONITOR:
+			break;
+		default:
+			ieee80211_reconfig_stations(sdata);
+			/* fall through */
+		case NL80211_IFTYPE_AP: /* AP stations are handled later */
+			for (i = 0; i < IEEE80211_NUM_ACS; i++)
+				drv_conf_tx(local, sdata, i,
+					    &sdata->tx_conf[i]);
+			break;
+		}
+
 		/* common change flags for all interface types */
 		changed = BSS_CHANGED_ERP_CTS_PROT |
 			  BSS_CHANGED_ERP_PREAMBLE |