From: Thomas Petazzoni Date: Wed, 31 Dec 2014 09:11:34 +0000 (+0100) Subject: staging: fbtft: add fb_watterott driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1e7d51c6850b8a6d840b9865d06fec51c1c3aa83;p=openwrt%2Fstaging%2Fblogic.git staging: fbtft: add fb_watterott driver This commit adds the fb_watterott driver from the fbtft project at https://github.com/notro/fbtft. Signed-off-by: Thomas Petazzoni Signed-off-by: Noralf Tronnes Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig index 886a48c9cc4f..8edec90f93b2 100644 --- a/drivers/staging/fbtft/Kconfig +++ b/drivers/staging/fbtft/Kconfig @@ -151,3 +151,9 @@ config FB_TFT_UPD161704 depends on FB_TFT help Generic Framebuffer support for uPD161704 + +config FB_TFT_WATTEROTT + tristate "FB driver for the WATTEROTT LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for WATTEROTT diff --git a/drivers/staging/fbtft/Makefile b/drivers/staging/fbtft/Makefile index dca2a459bb82..78008c3c0416 100644 --- a/drivers/staging/fbtft/Makefile +++ b/drivers/staging/fbtft/Makefile @@ -27,3 +27,4 @@ obj-$(CONFIG_FB_TFT_TINYLCD) += fb_tinylcd.o obj-$(CONFIG_FB_TFT_TLS8204) += fb_tls8204.o obj-$(CONFIG_FB_TFT_UC1701) += fb_uc1701.o obj-$(CONFIG_FB_TFT_UPD161704) += fb_upd161704.o +obj-$(CONFIG_FB_TFT_WATTEROTT) += fb_watterott.o diff --git a/drivers/staging/fbtft/fb_watterott.c b/drivers/staging/fbtft/fb_watterott.c new file mode 100644 index 000000000000..975b579359f3 --- /dev/null +++ b/drivers/staging/fbtft/fb_watterott.c @@ -0,0 +1,324 @@ +/* + * FB driver for the Watterott LCD Controller + * + * Copyright (C) 2013 Noralf Tronnes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "fbtft.h" + +#define DRVNAME "fb_watterott" +#define WIDTH 320 +#define HEIGHT 240 +#define FPS 5 +#define TXBUFLEN 1024 +#define DEFAULT_BRIGHTNESS 50 + +#define CMD_VERSION 0x01 +#define CMD_LCD_LED 0x10 +#define CMD_LCD_RESET 0x11 +#define CMD_LCD_ORIENTATION 0x20 +#define CMD_LCD_DRAWIMAGE 0x27 +#define COLOR_RGB323 8 +#define COLOR_RGB332 9 +#define COLOR_RGB233 10 +#define COLOR_RGB565 16 + + +static short mode = 565; +module_param(mode, short, 0); +MODULE_PARM_DESC(mode, "RGB color transfer mode: 332, 565 (default)"); + +static void write_reg8_bus8(struct fbtft_par *par, int len, ...) +{ + va_list args; + int i, ret; + u8 *buf = par->buf; + + va_start(args, len); + for (i = 0; i < len; i++) + *buf++ = (u8)va_arg(args, unsigned int); + va_end(args); + + fbtft_par_dbg_hex(DEBUG_WRITE_REGISTER, par, + par->info->device, u8, par->buf, len, "%s: ", __func__); + + ret = par->fbtftops.write(par, par->buf, len); + if (ret < 0) { + dev_err(par->info->device, + "%s: write() failed and returned %d\n", __func__, ret); + return; + } +} + +static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) +{ + unsigned start_line, end_line; + u16 *vmem16 = (u16 *)(par->info->screen_base + offset); + u16 *pos = par->txbuf.buf + 1; + u16 *buf16 = par->txbuf.buf + 10; + int i, j; + int ret = 0; + + fbtft_par_dbg(DEBUG_WRITE_VMEM, par, "%s()\n", __func__); + + start_line = offset / par->info->fix.line_length; + end_line = start_line + (len / par->info->fix.line_length) - 1; + + /* Set command header. pos: x, y, w, h */ + ((u8 *)par->txbuf.buf)[0] = CMD_LCD_DRAWIMAGE; + pos[0] = 0; + pos[2] = cpu_to_be16(par->info->var.xres); + pos[3] = cpu_to_be16(1); + ((u8 *)par->txbuf.buf)[9] = COLOR_RGB565; + + for (i = start_line; i <= end_line; i++) { + pos[1] = cpu_to_be16(i); + for (j = 0; j < par->info->var.xres; j++) + buf16[j] = cpu_to_be16(*vmem16++); + ret = par->fbtftops.write(par, + par->txbuf.buf, 10 + par->info->fix.line_length); + if (ret < 0) + return ret; + udelay(300); + } + + return 0; +} + +#define RGB565toRGB323(c) (((c&0xE000)>>8) | ((c&0600)>>6) | ((c&0x001C)>>2)) +#define RGB565toRGB332(c) (((c&0xE000)>>8) | ((c&0700)>>6) | ((c&0x0018)>>3)) +#define RGB565toRGB233(c) (((c&0xC000)>>8) | ((c&0700)>>5) | ((c&0x001C)>>2)) + +static int write_vmem_8bit(struct fbtft_par *par, size_t offset, size_t len) +{ + unsigned start_line, end_line; + u16 *vmem16 = (u16 *)(par->info->screen_base + offset); + u16 *pos = par->txbuf.buf + 1; + u8 *buf8 = par->txbuf.buf + 10; + int i, j; + int ret = 0; + + fbtft_par_dbg(DEBUG_WRITE_VMEM, par, "%s()\n", __func__); + + start_line = offset / par->info->fix.line_length; + end_line = start_line + (len / par->info->fix.line_length) - 1; + + /* Set command header. pos: x, y, w, h */ + ((u8 *)par->txbuf.buf)[0] = CMD_LCD_DRAWIMAGE; + pos[0] = 0; + pos[2] = cpu_to_be16(par->info->var.xres); + pos[3] = cpu_to_be16(1); + ((u8 *)par->txbuf.buf)[9] = COLOR_RGB332; + + for (i = start_line; i <= end_line; i++) { + pos[1] = cpu_to_be16(i); + for (j = 0; j < par->info->var.xres; j++) { + buf8[j] = RGB565toRGB332(*vmem16); + vmem16++; + } + ret = par->fbtftops.write(par, + par->txbuf.buf, 10 + par->info->var.xres); + if (ret < 0) + return ret; + udelay(700); + } + + return 0; +} + +static unsigned firmware_version(struct fbtft_par *par) +{ + u8 rxbuf[4] = {0, }; + + write_reg(par, CMD_VERSION); + par->fbtftops.read(par, rxbuf, 4); + if (rxbuf[1] != '.') + return 0; + + return (rxbuf[0] - '0') << 8 | (rxbuf[2] - '0') << 4 | (rxbuf[3] - '0'); +} + +static int init_display(struct fbtft_par *par) +{ + int ret; + unsigned version; + u8 save_mode; + + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__); + + /* enable SPI interface by having CS and MOSI low during reset */ + save_mode = par->spi->mode; + par->spi->mode |= SPI_CS_HIGH; + ret = par->spi->master->setup(par->spi); /* set CS inactive low */ + if (ret) { + dev_err(par->info->device, "Could not set SPI_CS_HIGH\n"); + return ret; + } + write_reg(par, 0x00); /* make sure mode is set */ + + mdelay(50); + par->fbtftops.reset(par); + mdelay(1000); + par->spi->mode = save_mode; + ret = par->spi->master->setup(par->spi); + if (ret) { + dev_err(par->info->device, "Could not restore SPI mode\n"); + return ret; + } + write_reg(par, 0x00); + + version = firmware_version(par); + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "Firmware version: %x.%02x\n", + version >> 8, version & 0xFF); + + if (mode == 332) + par->fbtftops.write_vmem = write_vmem_8bit; + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + /* not used on this controller */ +} + +static int set_var(struct fbtft_par *par) +{ + u8 rotate; + + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__); + + /* this controller rotates clock wise */ + switch (par->info->var.rotate) { + case 90: + rotate = 27; + break; + case 180: + rotate = 18; + break; + case 270: + rotate = 9; + break; + default: + rotate = 0; + } + write_reg(par, CMD_LCD_ORIENTATION, rotate); + + return 0; +} + +static int verify_gpios(struct fbtft_par *par) +{ + if (par->gpio.reset < 0) { + dev_err(par->info->device, "Missing 'reset' gpio. Aborting.\n"); + return -EINVAL; + } + return 0; +} + +#ifdef CONFIG_FB_BACKLIGHT +static int backlight_chip_update_status(struct backlight_device *bd) +{ + struct fbtft_par *par = bl_get_data(bd); + int brightness = bd->props.brightness; + + fbtft_par_dbg(DEBUG_BACKLIGHT, par, + "%s: brightness=%d, power=%d, fb_blank=%d\n", + __func__, bd->props.brightness, bd->props.power, + bd->props.fb_blank); + + if (bd->props.power != FB_BLANK_UNBLANK) + brightness = 0; + + if (bd->props.fb_blank != FB_BLANK_UNBLANK) + brightness = 0; + + write_reg(par, CMD_LCD_LED, brightness); + + return 0; +} + +static void register_chip_backlight(struct fbtft_par *par) +{ + struct backlight_device *bd; + struct backlight_properties bl_props = { 0, }; + struct backlight_ops *bl_ops; + + fbtft_par_dbg(DEBUG_BACKLIGHT, par, "%s()\n", __func__); + + bl_ops = devm_kzalloc(par->info->device, sizeof(struct backlight_ops), + GFP_KERNEL); + if (!bl_ops) { + dev_err(par->info->device, + "%s: could not allocate memory for backlight operations.\n", + __func__); + return; + } + + bl_ops->update_status = backlight_chip_update_status; + bl_props.type = BACKLIGHT_RAW; + bl_props.power = FB_BLANK_POWERDOWN; + bl_props.max_brightness = 100; + bl_props.brightness = DEFAULT_BRIGHTNESS; + + bd = backlight_device_register(dev_driver_string(par->info->device), + par->info->device, par, bl_ops, &bl_props); + if (IS_ERR(bd)) { + dev_err(par->info->device, + "cannot register backlight device (%ld)\n", + PTR_ERR(bd)); + return; + } + par->info->bl_dev = bd; + + if (!par->fbtftops.unregister_backlight) + par->fbtftops.unregister_backlight = fbtft_unregister_backlight; +} +#else +#define register_chip_backlight NULL +#endif + + +static struct fbtft_display display = { + .regwidth = 8, + .buswidth = 8, + .width = WIDTH, + .height = HEIGHT, + .fps = FPS, + .txbuflen = TXBUFLEN, + .fbtftops = { + .write_register = write_reg8_bus8, + .write_vmem = write_vmem, + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + .verify_gpios = verify_gpios, + .register_backlight = register_chip_backlight, + }, +}; +FBTFT_REGISTER_DRIVER(DRVNAME, "watterott,openlcd", &display); + +MODULE_ALIAS("spi:" DRVNAME); + +MODULE_DESCRIPTION("FB driver for the Watterott LCD Controller"); +MODULE_AUTHOR("Noralf Tronnes"); +MODULE_LICENSE("GPL");