From: Rodrigo Tartajo Date: Sat, 20 Apr 2013 23:02:12 +0000 (-0300) Subject: [media] rtl2832u: restore ir remote control support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1e41413f9869c4a688b2f937ff50584bd62eeb31;p=openwrt%2Fstaging%2Fblogic.git [media] rtl2832u: restore ir remote control support Hi, This patch uses the driver from openpli[1] as a template to restore the remote control support. I had to divert from the original to use the in kernel rc protocol decoder. The key repetition does, not seem to work but I cant find the problem in the driver. As a raw rc provider, no key table is hardcoded. Rodrigo. [1]: https://aur.archlinux.org/packages/dvb-usb-rtl2832u-openpli/?comments=all Signed-off-by: Rodrigo Tartajo Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb.h b/drivers/media/usb/dvb-usb-v2/dvb_usb.h index 658c6d47fdff..399916bd588f 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb.h +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb.h @@ -140,7 +140,7 @@ struct dvb_usb_rc { int (*change_protocol)(struct rc_dev *dev, u64 *rc_type); int (*query) (struct dvb_usb_device *d); unsigned int interval; - const enum rc_driver_type driver_type; + enum rc_driver_type driver_type; bool bulk_mode; }; diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index 22015fe1a0f3..e592662ccc06 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -1249,11 +1249,21 @@ static int rtl2831u_get_rc_config(struct dvb_usb_device *d, #if IS_ENABLED(CONFIG_RC_CORE) static int rtl2832u_rc_query(struct dvb_usb_device *d) { +#define TICSAT38KHZTONS(x) ((x) * (1000000000/38000)) int ret, i; struct rtl28xxu_priv *priv = d->priv; u8 buf[128]; int len; - struct rtl28xxu_reg_val rc_nec_tab[] = { + struct ir_raw_event ev; //encode single ir event (pulse or space) + struct rtl28xxu_xreg_val rc_sys_init_tab[] = { + { SYS_DEMOD_CTL1, OP_AND, 0xfb }, + { SYS_DEMOD_CTL1, OP_AND, 0xf7 }, + { USB_CTRL, OP_OR , 0x20 }, + { SYS_SYS1, OP_AND, 0xf7 }, + { SYS_GPIO_OUT_EN, OP_OR , 0x08 }, + { SYS_GPIO_OUT_VAL, OP_OR , 0x08 }, + }; // system hard init + struct rtl28xxu_reg_val rc_init_tab[] = { { IR_RX_CTRL, 0x20 }, { IR_RX_BUF_CTRL, 0x80 }, { IR_RX_IF, 0xff }, @@ -1268,13 +1278,40 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d) { IR_MAX_H_TOL_LEN, 0x1e }, { IR_MAX_L_TOL_LEN, 0x1e }, { IR_RX_CTRL, 0x80 }, - }; + }; // hard init + struct rtl28xxu_reg_val rc_reinit_tab[] = { + { IR_RX_CTRL, 0x20 }, + { IR_RX_BUF_CTRL, 0x80 }, + { IR_RX_IF, 0xff }, + { IR_RX_IE, 0xff }, + { IR_RX_CTRL, 0x80 }, + }; // reinit IR + struct rtl28xxu_reg_val rc_clear_tab[] = { + { IR_RX_IF, 0x03 }, + { IR_RX_BUF_CTRL, 0x80 }, + { IR_RX_CTRL, 0x80 }, + }; // clear reception /* init remote controller */ if (!priv->rc_active) { - for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) { - ret = rtl28xx_wr_reg(d, rc_nec_tab[i].reg, - rc_nec_tab[i].val); + for (i = 0; i < ARRAY_SIZE(rc_sys_init_tab); i++) { + ret = rtl28xx_rd_reg(d, rc_sys_init_tab[i].reg, &buf[0]); + if (ret) + goto err; + if (rc_sys_init_tab[i].op == OP_AND) { + buf[0] &= rc_sys_init_tab[i].mask; + } + else {//OP_OR + buf[0] |= rc_sys_init_tab[i].mask; + } + ret = rtl28xx_wr_reg(d, rc_sys_init_tab[i].reg, + buf[0]); + if (ret) + goto err; + } + for (i = 0; i < ARRAY_SIZE(rc_init_tab); i++) { + ret = rtl28xx_wr_reg(d, rc_init_tab[i].reg, + rc_init_tab[i].val); if (ret) goto err; } @@ -1286,7 +1323,7 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d) goto err; if (buf[0] != 0x83) - goto exit; + goto err; ret = rtl28xx_rd_reg(d, IR_RX_BC, &buf[0]); if (ret) @@ -1295,26 +1332,48 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d) len = buf[0]; ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len); - /* TODO: pass raw IR to Kernel IR decoder */ + /* pass raw IR to Kernel IR decoder */ + init_ir_raw_event(&ev); + ir_raw_event_reset(d->rc_dev); + ev.pulse=1; + for(i=0; true; ++i) { // conver count to time + if (i >= len || !(buf[i] & 0x80) != !(ev.pulse)) {//end or transition pulse/space: flush + ir_raw_event_store(d->rc_dev, &ev); + ev.duration = 0; + } + if (i >= len) + break; + ev.pulse = buf[i] >> 7; + ev.duration += TICSAT38KHZTONS(((u32)(buf[i] & 0x7F)) << 1); + } + ir_raw_event_handle(d->rc_dev); - ret = rtl28xx_wr_reg(d, IR_RX_IF, 0x03); - ret = rtl28xx_wr_reg(d, IR_RX_BUF_CTRL, 0x80); - ret = rtl28xx_wr_reg(d, IR_RX_CTRL, 0x80); + for (i = 0; i < ARRAY_SIZE(rc_clear_tab); i++) { + ret = rtl28xx_wr_reg(d, rc_clear_tab[i].reg, + rc_clear_tab[i].val); + if (ret) + goto err; + } -exit: return ret; err: + for (i = 0; i < ARRAY_SIZE(rc_reinit_tab); i++) { + ret = rtl28xx_wr_reg(d, rc_reinit_tab[i].reg, + rc_reinit_tab[i].val); + } dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; +#undef TICSAT38KHZTONS } static int rtl2832u_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) { rc->map_name = RC_MAP_EMPTY; - rc->allowed_protos = RC_BIT_NEC; + rc->allowed_protos = RC_BIT_ALL; rc->query = rtl2832u_rc_query; rc->interval = 400; + rc->driver_type = RC_DRIVER_IR_RAW; return 0; } diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h index 533a33127289..0177b3871ba4 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h @@ -97,6 +97,17 @@ struct rtl28xxu_reg_val { u8 val; }; +enum OP{ + OP_AND =0, + OP_OR +}; + +struct rtl28xxu_xreg_val { + u16 reg; + u8 op; + u8 mask; +}; + /* * memory map *