From: Xing Zheng Date: Tue, 1 Nov 2016 03:22:06 +0000 (+0800) Subject: clk: rockchip: optimize 800MHz and 1GHz pll rates on RK3399 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1dfbec3905548a0cbc820a62e1d8adee1c80bd41;p=openwrt%2Fstaging%2Fblogic.git clk: rockchip: optimize 800MHz and 1GHz pll rates on RK3399 Usually, the 800MHz and 1GHz are supplied for CPLL and NPLL in the RK3399. But dues to the carelessly copying from RK3036 when the RK3399 bringing up, the refdiv == 6, it will increase the lock time, and it is not an optimal configuration. Let's fix them for the lock time and jitter are lower: 800 MHz: - FVCO == 2.4 GHz, revdiv == 1. 1 GHz: - FVCO == 3 GHz, revdiv == 1. Signed-off-by: Xing Zheng Signed-off-by: Heiko Stuebner --- diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index a5a3f412d09a..28aff4507d96 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -77,7 +77,7 @@ static struct rockchip_pll_rate_table rk3399_pll_rates[] = { RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0), RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0), RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0), - RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0), + RK3036_PLL_RATE(1000000000, 1, 125, 3, 1, 1, 0), RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0), RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0), RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0), @@ -87,7 +87,7 @@ static struct rockchip_pll_rate_table rk3399_pll_rates[] = { RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0), RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0), RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0), - RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0), + RK3036_PLL_RATE( 800000000, 1, 100, 3, 1, 1, 0), RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0), RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0), RK3036_PLL_RATE( 676000000, 3, 169, 2, 1, 1, 0),