From: Mathesh Velayudan <123v.mathesh@gmail.com> Date: Thu, 4 Jul 2024 12:09:51 +0000 (+0530) Subject: bmips: add support for TP-Link TD-W8968 V3 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1d976f83e40c48111892b06f59607f77b4f20eb1;p=openwrt%2Fstaging%2Fwigyori.git bmips: add support for TP-Link TD-W8968 V3 TP-Link TD-W8968 v3 is an 300Mbps Wireless N USB ADSL2+ Modem Router based on Broadcom BCM6318 SoC. Hardware: CPU: Broadcom BCM6318, 333 MHz, 1 core Flash: 8MB RAM: 64 MB Ethernet: 4x 10/100 Mbps Wireless: 802.11b/g/n, BCM43217 LEDs/Buttons: 10x / 3x USB: 1x 2.0 Flash instructions: * Assign static IP 192.168.1.100 to PC * Unplug the power source * Press the RESET button at the router, don't release it yet! * Plug the power source. Wait for some seconds * Release the RESET button * Browse to http://192.168.1.1 * Upload the openwrt-bmips-bcm6318-tp-link_td-w8968-v3-squashfs-cfe.bin file * Wait some minutes until the firmware upgrade finish. Signed-off-by: Mathesh Velayudan <123v.mathesh@gmail.com> --- diff --git a/target/linux/bmips/bcm6318/base-files/etc/board.d/01_leds b/target/linux/bmips/bcm6318/base-files/etc/board.d/01_leds index 98355460a0..059a4f415a 100644 --- a/target/linux/bmips/bcm6318/base-files/etc/board.d/01_leds +++ b/target/linux/bmips/bcm6318/base-files/etc/board.d/01_leds @@ -6,7 +6,8 @@ board_config_update case "$(board_name)" in -comtrend,ar-5315u) +comtrend,ar-5315u |\ +tp-link,td-w8968-v3) ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1" ;; esac diff --git a/target/linux/bmips/bcm6318/base-files/etc/board.d/02_network b/target/linux/bmips/bcm6318/base-files/etc/board.d/02_network index 92b2e8f4d4..b821f6a545 100644 --- a/target/linux/bmips/bcm6318/base-files/etc/board.d/02_network +++ b/target/linux/bmips/bcm6318/base-files/etc/board.d/02_network @@ -5,7 +5,8 @@ board_config_update case "$(board_name)" in -comtrend,ar-5315u) +comtrend,ar-5315u |\ +tp-link,td-w8968-v3) ucidef_set_bridge_device switch ucidef_set_interface_lan "lan1 lan2 lan3 lan4" ;; diff --git a/target/linux/bmips/bcm6318/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bmips/bcm6318/base-files/etc/uci-defaults/09_fix_crc index a52f0ecc40..df09e1d249 100644 --- a/target/linux/bmips/bcm6318/base-files/etc/uci-defaults/09_fix_crc +++ b/target/linux/bmips/bcm6318/base-files/etc/uci-defaults/09_fix_crc @@ -3,7 +3,8 @@ . /lib/functions.sh case "$(board_name)" in -comtrend,ar-5315u) +comtrend,ar-5315u) |\ +tp-link,td-w8968-v3) mtd fixtrx firmware ;; esac diff --git a/target/linux/bmips/dts/bcm6318-tp-link-td-w8968-v3.dts b/target/linux/bmips/dts/bcm6318-tp-link-td-w8968-v3.dts new file mode 100644 index 0000000000..59b209daed --- /dev/null +++ b/target/linux/bmips/dts/bcm6318-tp-link-td-w8968-v3.dts @@ -0,0 +1,253 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "bcm6318.dtsi" + +/ { + model = "TP-Link TD-W8968 V3"; + compatible = "tp-link,td-w8968-v3", "brcm,bcm6318"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wlan { + label = "wlan"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + + wps { + label = "wps"; + gpios = <&gpio 33 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + + reset { + label = "reset"; + gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + }; + + bcm43217-sprom { + compatible = "brcm,bcma-sprom"; + + pci-bus = <1>; + pci-dev = <0>; + + nvmem-cells = <&macaddr_cfe_6a0 1>; + nvmem-cell-names = "mac-address"; + + brcm,sprom = "brcm/bcm43217-sprom.bin"; + }; +}; + +&ehci { + status = "okay"; +}; + +ðernet { + status = "okay"; + + nvmem-cells = <&macaddr_cfe_6a0 0>; + nvmem-cell-names = "mac-address"; +}; + +&hsspi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <62500000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + reg = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x000000 0x010000>; + label = "cfe"; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_cfe_6a0: macaddr@6a0 { + compatible = "mac-base"; + reg = <0x6a0 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@10000 { + compatible = "brcm,bcm963xx-imagetag"; + reg = <0x010000 0x7e0000>; + label = "firmware"; + }; + + partition@7f0000 { + reg = <0x7f0000 0x010000>; + label = "nvram"; + }; + }; + }; +}; + +&leds { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds + &pinctrl_ephy0_act_led &pinctrl_ephy1_act_led + &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>; + + led@2 { + reg = <2>; + active-low; + function = LED_FUNCTION_WPS; + color = ; + }; + + led_power_green: led@3 { + reg = <3>; + active-high; + function = LED_FUNCTION_POWER; + color = ; + }; + + led@4 { + /* EPHY0 Act */ + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4>; + }; + + led@5 { + /* EPHY1 Act */ + reg = <5>; + brcm,hardware-controlled; + brcm,link-signal-sources = <5>; + }; + + led@6 { + /* EPHY2 Act */ + reg = <6>; + brcm,hardware-controlled; + brcm,link-signal-sources = <6>; + }; + + led@7 { + /* EPHY3 Act */ + reg = <7>; + brcm,hardware-controlled; + brcm,link-signal-sources = <7>; + }; + + led@8 { + reg = <8>; + active-low; + function = LED_FUNCTION_WAN_ONLINE; + color = ; + }; + + led@10 { + reg = <10>; + active-low; + label = "green:dsl"; + }; + + led@13 { + reg = <13>; + active-low; + function = LED_FUNCTION_USB; + color = ; + }; + + led@16 { + reg = <16>; + active-low; + function = LED_FUNCTION_WLAN; + color = ; + }; +}; + +&ohci { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&pinctrl { + pinctrl_leds: leds { + function = "led"; + pins = "gpio2", "gpio3", + "gpio8", "gpio10", + "gpio13", "gpio16"; + }; +}; + +&switch0 { + ports { + port@0 { + reg = <0>; + label = "lan4"; + + phy-handle = <&phy1>; + phy-mode = "mii"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + + phy-handle = <&phy2>; + phy-mode = "mii"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + + phy-handle = <&phy3>; + phy-mode = "mii"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + + phy-handle = <&phy4>; + phy-mode = "mii"; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usbh { + status = "okay"; +}; diff --git a/target/linux/bmips/image/bcm6318.mk b/target/linux/bmips/image/bcm6318.mk index bfd75cc077..286a30c2f4 100644 --- a/target/linux/bmips/image/bcm6318.mk +++ b/target/linux/bmips/image/bcm6318.mk @@ -12,3 +12,23 @@ define Device/comtrend_ar-5315u kmod-leds-bcm6328 endef TARGET_DEVICES += comtrend_ar-5315u + +define Device/tp-link_td-w8968-v3 + $(Device/bcm63xx-cfe) + DEVICE_VENDOR := TP-Link + DEVICE_MODEL := TD-W8968 + DEVICE_VARIANT := V3 + DEVICE_ALT0_VENDOR := TP-Link + DEVICE_ALT0_MODEL := TD-W8968 + DEVICE_ALT0_VARIANT := V4 + DEVICE_ALT1_VENDOR := TP-Link + DEVICE_ALT1_MODEL := TD-W8960N + DEVICE_ALT1_VARIANT := V5 + CHIP_ID := 6318 + CFE_BOARD_ID := 96318REF + FLASH_MB := 8 + DEVICE_PACKAGES += $(USB2_PACKAGES) \ + $(B43_PACKAGES) broadcom-43217-sprom \ + kmod-leds-bcm6328 +endef +TARGET_DEVICES += tp-link_td-w8968-v3