From: Viresh Kumar Date: Thu, 7 Dec 2017 09:45:19 +0000 (+0530) Subject: cpufreq: longhaul: Revert transition_delay_us to 200 ms X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1d0d064307cbfd8546841f6e9d94d02c55e45e1e;p=openwrt%2Fstaging%2Fblogic.git cpufreq: longhaul: Revert transition_delay_us to 200 ms The commit e948bc8fbee0 ("cpufreq: Cap the default transition delay value to 10 ms") caused a regression on EPIA-M min-ITX computer where shutdown or reboot hangs occasionally with a print message like: longhaul: Warning: Timeout while waiting for idle PCI bus cpufreq: __target_index: Failed to change cpu frequency: -16 This probably happens because the cpufreq governor tries to change the frequency of the CPU faster than allowed by the hardware. Before the above commit, the default transition delay was set to 200 ms for a transition_latency of 200000 ns. Lets revert back to that transition delay value to fix it. Note that several other transition delay values were tested like 20 ms and 30 ms and none of them have resolved system hang issue completely. Fixes: e948bc8fbee0 (cpufreq: Cap the default transition delay value to 10 ms) Reported-by: Meelis Roos Suggested-by: Rafael J. Wysocki Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index c46a12df40dd..5faa37c5b091 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -894,7 +894,7 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy) if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0)) longhaul_setup_voltagescaling(); - policy->cpuinfo.transition_latency = 200000; /* nsec */ + policy->transition_delay_us = 200000; /* usec */ return cpufreq_table_validate_and_show(policy, longhaul_table); }