From: Tomasz Maciej Nowak Date: Thu, 11 Feb 2021 18:29:32 +0000 (+0100) Subject: mvebu: espressobin: drop COMPHY removement patch X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1caa81e505a1da0ebd70351996e382fa9dafaa8d;p=openwrt%2Fstaging%2Fthess.git mvebu: espressobin: drop COMPHY removement patch There are proper workarounds merged to 5.4 stable tree for ESPRESSObin boards with older bootloader: 4e1a23779bde ("ata: ahci: mvebu: Make SATA PHY optional for Armada 3720") 40af962eb1d4 ("usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720") Signed-off-by: Tomasz Maciej Nowak --- diff --git a/target/linux/mvebu/patches-5.4/316-arm64-dts-marvell-espressobin-remove-COMPHY-nodes-as.patch b/target/linux/mvebu/patches-5.4/316-arm64-dts-marvell-espressobin-remove-COMPHY-nodes-as.patch deleted file mode 100644 index 44e9a9237b..0000000000 --- a/target/linux/mvebu/patches-5.4/316-arm64-dts-marvell-espressobin-remove-COMPHY-nodes-as.patch +++ /dev/null @@ -1,53 +0,0 @@ -From e928880bd8b26fd704231549456ae7da88cecda6 Mon Sep 17 00:00:00 2001 -From: Tomasz Maciej Nowak -Date: Mon, 20 Apr 2020 14:35:34 +0200 -Subject: [PATCH] arm64: dts: marvell: espressobin: remove COMPHY nodes - assignmet - -This commit removes changes from upstream commits: -8e18c8e58da6 arm64: dts: marvell: armada-3720-espressobin: declare SATA -PHY property -bd3d25b07342 arm64: dts: marvell: armada-37xx: link USB hosts with their -PHYs -For most boards which have factory bootloader this caused that devices -connected to USB 3.0 and SATA port were not detected. For them to -function users would need to upgrade the bootloader to version with ARM -Trusted Firmware 2.1 or later. Unfortunately there is no official -bootloader image with updated ATF component, therefore drop these -properties from nodes. This change was also tested briefly with -bootloader with updated ATF and the ports functioned properly. - -Signed-off-by: Tomasz Maciej Nowak ---- - arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 8 ++++++-- - 1 file changed, 6 insertions(+), 2 deletions(-) - ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -@@ -64,8 +64,6 @@ - /* J6 */ - &sata { - status = "okay"; -- phys = <&comphy2 0>; -- phy-names = "sata-phy"; - }; - - /* J1 */ -@@ -131,11 +129,17 @@ - /* J7 */ - &usb3 { - status = "okay"; -+ -+ /delete-property/ phys; -+ /delete-property/ phy-names; - }; - - /* J8 */ - &usb2 { - status = "okay"; -+ -+ /delete-property/ phys; -+ /delete-property/ phy-names; - }; - - &mdio { diff --git a/target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch b/target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch new file mode 100644 index 0000000000..2240d0b39e --- /dev/null +++ b/target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch @@ -0,0 +1,34 @@ +Certain SFP modules (most notably Nokia GPON ones) first check +connectivity on 1000base-x, and switch to 2500base-x afterwards. This +is considered a quirk so the phylink switches the interface to +2500base-x as well. + +However, after power-cycling the uDPU device, network interface/SFP module +will not work correctly until the module is re-seated. This patch +resolves this issue by forcing the interface to be brought up in +2500base-x mode by default. + +Signed-off-by: Jakov Petrina +Signed-off-by: Vladimir Vid +Cc: Luka Perkov + +--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts ++++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +@@ -162,7 +162,7 @@ + }; + + ð0 { +- phy-mode = "sgmii"; ++ phy-mode = "2500base-x"; + status = "okay"; + managed = "in-band-status"; + phys = <&comphy1 0>; +@@ -170,7 +170,7 @@ + }; + + ð1 { +- phy-mode = "sgmii"; ++ phy-mode = "2500base-x"; + status = "okay"; + managed = "in-band-status"; + phys = <&comphy0 1>; diff --git a/target/linux/mvebu/patches-5.4/317-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch b/target/linux/mvebu/patches-5.4/317-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch deleted file mode 100644 index 2240d0b39e..0000000000 --- a/target/linux/mvebu/patches-5.4/317-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch +++ /dev/null @@ -1,34 +0,0 @@ -Certain SFP modules (most notably Nokia GPON ones) first check -connectivity on 1000base-x, and switch to 2500base-x afterwards. This -is considered a quirk so the phylink switches the interface to -2500base-x as well. - -However, after power-cycling the uDPU device, network interface/SFP module -will not work correctly until the module is re-seated. This patch -resolves this issue by forcing the interface to be brought up in -2500base-x mode by default. - -Signed-off-by: Jakov Petrina -Signed-off-by: Vladimir Vid -Cc: Luka Perkov - ---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts -@@ -162,7 +162,7 @@ - }; - - ð0 { -- phy-mode = "sgmii"; -+ phy-mode = "2500base-x"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy1 0>; -@@ -170,7 +170,7 @@ - }; - - ð1 { -- phy-mode = "sgmii"; -+ phy-mode = "2500base-x"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy0 1>;