From: Stelian Pop <stelian@popies.net>
Date: Thu, 8 May 2008 18:52:14 +0000 (+0200)
Subject: AT91CAP9ADK: Handle 8 or 16 bit NAND
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1c90df3e148ce0a3e2c86c63b38b19d47772f2a0;p=project%2Fbcm63xx%2Fu-boot.git

AT91CAP9ADK: Handle 8 or 16 bit NAND

The Atmel boards can handle 8 or 16 bit NAND memories. This patch
makes the support configurable in the board config header file
(CFG_NAND_DBW_8 or CFG_NAND_DBW_16).

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---

diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index 5de52b9197..67e16bb866 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -116,7 +116,12 @@ static void at91cap9_nand_hw_init(void)
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
-		       AT91_SMC_DBW_8 | AT91_SMC_TDF_(1));
+#ifdef CFG_NAND_DBW_16
+		       AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+		       AT91_SMC_DBW_8 |
+#endif
+		       AT91_SMC_TDF_(1));
 
 	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
 
@@ -252,7 +257,6 @@ int board_init(void)
 #ifdef CONFIG_USB_OHCI_NEW
 	at91cap9_uhp_hw_init();
 #endif
-
 	return 0;
 }
 
diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c
index 28091a4226..0432ef13d8 100644
--- a/board/atmel/at91cap9adk/nand.c
+++ b/board/atmel/at91cap9adk/nand.c
@@ -63,6 +63,9 @@ static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd, int cmd)
 int board_nand_init(struct nand_chip *nand)
 {
 	nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+	nand->options = NAND_BUSWIDTH_16;
+#endif
 	nand->hwcontrol = at91cap9adk_nand_hwcontrol;
 	nand->chip_delay = 20;
 
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index c891fa80ed..7887b36db0 100644
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -110,6 +110,7 @@
 #define NAND_MAX_CHIPS			1
 #define CFG_MAX_NAND_DEVICE		1
 #define CFG_NAND_BASE			0x40000000
+#define CFG_NAND_DBW_8			1
 
 /* Ethernet */
 #define CONFIG_MACB			1