From: Rodrigo Balerdi <lanchon@gmail.com>
Date: Wed, 3 Apr 2024 03:30:46 +0000 (-0300)
Subject: ipq40xx: whw03v2: enable additional 5 GHz channels
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1c32cee348f54e9f64b5928ee1a1efe491eec137;p=openwrt%2Fopenwrt.git

ipq40xx: whw03v2: enable additional 5 GHz channels

This device supports channel ranges 36-64 and 100-165, just like
others based on the same reference design, but its current DTS is
unnecessarily restricting these ranges to 36-48 and 149-165.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
---

diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-whw03v2.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-whw03v2.dts
index 96733d8780..b76c52cd0a 100644
--- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-whw03v2.dts
+++ b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-whw03v2.dts
@@ -487,7 +487,6 @@
 	qcom,coexist-support = <1>;
 	qcom,coexist-gpio-pin = <0x34>;
 
-	ieee80211-freq-limit = <2401000 2473000>;
 	qcom,ath10k-calibration-variant = "linksys-whw03v2";
 
 	nvmem-cell-names = "pre-calibration", "mac-address";
@@ -497,7 +496,7 @@
 &wifi1 {
 	status = "okay";
 
-	ieee80211-freq-limit = <5170000 5250000>;
+	ieee80211-freq-limit = <5170000 5330000>;
 	qcom,ath10k-calibration-variant = "linksys-whw03v2";
 
 	nvmem-cell-names = "pre-calibration", "mac-address";
@@ -507,7 +506,7 @@
 &wifi2 {
 	status = "okay";
 
-	ieee80211-freq-limit = <5735000 5835000>;
+	ieee80211-freq-limit = <5490000 5835000>;
 	qcom,ath10k-calibration-variant = "linksys-whw03v2";
 
 	nvmem-cell-names = "pre-calibration", "mac-address";
diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-whw03v2.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-whw03v2.dts
index 96733d8780..b76c52cd0a 100644
--- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-whw03v2.dts
+++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-whw03v2.dts
@@ -487,7 +487,6 @@
 	qcom,coexist-support = <1>;
 	qcom,coexist-gpio-pin = <0x34>;
 
-	ieee80211-freq-limit = <2401000 2473000>;
 	qcom,ath10k-calibration-variant = "linksys-whw03v2";
 
 	nvmem-cell-names = "pre-calibration", "mac-address";
@@ -497,7 +496,7 @@
 &wifi1 {
 	status = "okay";
 
-	ieee80211-freq-limit = <5170000 5250000>;
+	ieee80211-freq-limit = <5170000 5330000>;
 	qcom,ath10k-calibration-variant = "linksys-whw03v2";
 
 	nvmem-cell-names = "pre-calibration", "mac-address";
@@ -507,7 +506,7 @@
 &wifi2 {
 	status = "okay";
 
-	ieee80211-freq-limit = <5735000 5835000>;
+	ieee80211-freq-limit = <5490000 5835000>;
 	qcom,ath10k-calibration-variant = "linksys-whw03v2";
 
 	nvmem-cell-names = "pre-calibration", "mac-address";