From: Ivan Davydov Date: Mon, 2 Dec 2024 12:47:08 +0000 (+0300) Subject: ramips: mt76x8: add support for Keenetic KN-3211 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1c274227b0263795ef07bc1248f16046b3915941;p=openwrt%2Fstaging%2Fstintel.git ramips: mt76x8: add support for Keenetic KN-3211 Keenetic KN-3211 is a 2.4 Ghz band 11n (Wi-Fi 4) Wi-Fi repeater, based on MT7628AN. Specification: - System-On-Chip: MT7628AN - CPU/Speed: 575 MHz - Flash-Chip: Winbond w25q256 - Flash size: 32768 KiB - RAM: 64 MiB - 1x 10/100 Mbps Ethernet - 2x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - Wireless No1 (2T2R): SoC Built-in 2.4 GHz 802.11bgn - 3x LED, 1x button, 1x mode switch Notes: - The device supports dual boot mode - The firmware partitions were concatenated into one - The status button has been reassigned as the WPS button. Flash instruction: This device doesn't support sysupgrade, so the only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-ramips-mt76x8-keenetic_kn-3211-squashfs-factory.bin" to "KN-3211_recovery.bin" and place it in tftp server directory. 3. Connect PC with the ethernet port, press the reset button, power up the router and keep button pressed until power led starts blinking. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Ivan Davydov Link: https://github.com/openwrt/openwrt/pull/17080 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/ramips/dts/mt7628an_keenetic_kn-3211.dts b/target/linux/ramips/dts/mt7628an_keenetic_kn-3211.dts new file mode 100644 index 0000000000..1a06cd94bc --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_keenetic_kn-3211.dts @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +#include "mt7628an.dtsi" + +#include +#include +#include + +/ { + compatible = "keenetic,kn-3211", "mediatek,mt7628an-soc"; + model = "Keenetic KN-3211"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_blue; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_status_blue: status_blue { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + led_status_green: status_green { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + + led_status_red: status_red { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + virtual_flash { + compatible = "mtd-concat"; + devices = <&firmware1 &firmware2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x0 0x1ec0000>; + }; + }; + }; +}; + +&state_default { + gpio { + groups = "i2s", "i2c", "gpio", "refclk", "wdt", "wled_an"; + function = "gpio"; + }; +}; + +&usbphy { + status = "disabled"; +}; + +&ehci { + status = "disabled"; +}; + +&ohci { + status = "disabled"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <32000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-config"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "rf-eeprom"; + reg = <0x40000 0x10000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x400>; + }; + + eeprom_factory_400: eeprom@400 { + reg = <0x400 0x4da8>; + }; + + macaddr_factory_4: macaddr@4 { + reg = <0x4 0x6>; + }; + }; + }; + + firmware1: partition@50000 { + label = "firmware_1"; + reg = <0x50000 0xf60000>; + }; + + partition@fb0000 { + label = "config_1"; + reg = <0xfb0000 0x40000>; + read-only; + }; + + partition@ff0000 { + label = "dump"; + reg = <0xff0000 0x10000>; + read-only; + }; + + partition@1000000 { + label = "u-state"; + reg = <0x1000000 0x30000>; + read-only; + }; + + partition@1030000 { + label = "u-config_res"; + reg = <0x1030000 0x10000>; + read-only; + }; + + partition@1040000 { + label = "rf-eeprom_res"; + reg = <0x1040000 0x10000>; + read-only; + }; + + firmware2: partition@1050000 { + label = "firmware_2"; + reg = <0x1050000 0xf60000>; + }; + + partition@1fb0000 { + label = "config_2"; + reg = <0x1fb0000 0x40000>; + read-only; + }; + }; + }; +}; + +ðernet { + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; +}; + +&esw { + mediatek,portmap = <0x3e>; +}; + +&wmac { + status = "okay"; + + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_400>; + nvmem-cell-names = "eeprom"; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 7e343bf016..25a7344afb 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -365,6 +365,16 @@ define Device/keenetic_kn-1613 endef TARGET_DEVICES += keenetic_kn-1613 +define Device/keenetic_kn-3211 + IMAGE_SIZE := 31488k + DEVICE_VENDOR := Keenetic + DEVICE_MODEL := KN-3211 + IMAGES += factory.bin + IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \ + check-size | zyimage -d 0x803211 -v "KN-3211" +endef +TARGET_DEVICES += keenetic_kn-3211 + define Device/kroks_kndrt31r16 IMAGE_SIZE := 16064k DEVICE_VENDOR := Kroks diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 616baa80c0..e57643690a 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -134,6 +134,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "0:wan" "6@eth0" ;; + keenetic,kn-3211) + ucidef_add_switch "switch0" \ + "2:lan" "6@eth0" + ;; kroks,kndrt31r19) ucidef_add_switch "switch0" \ "0:lan" "6@eth0" @@ -280,6 +284,7 @@ ramips_setup_macs() wan_mac=$(mtd_get_mac_binary factory 0x2e) ;; keenetic,kn-1613|\ + keenetic,kn-3211|\ zyxel,keenetic-extra-ii) wan_mac=$(mtd_get_mac_binary rf-eeprom 0x28) ;;