From: Kristoffer Nyborg Gregertsen Date: Thu, 29 Nov 2007 11:01:51 +0000 (+0100) Subject: Several fixes for the AVR32 PATA driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1c20a493caa30c5d47a394f9dbd86e6282323db9;p=openwrt%2Fstaging%2Fblogic.git Several fixes for the AVR32 PATA driver Several fixes for the AVR32 PATA driver: * Updated to use new AVR32 SMC timing API. This removes the need for "magic" constants in signal timing. * Removed the ATA_FLAG_PIO_POLLING, the driver should use interrupts. * Removed .port_disable and .irq_ack as these are no longer needed. * Improved some comments. Signed-off-by: Kristoffer Nyborg Gregertsen Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c index bb250a48e27c..67e574de31e8 100644 --- a/drivers/ata/pata_at32.c +++ b/drivers/ata/pata_at32.c @@ -28,7 +28,7 @@ #include #define DRV_NAME "pata_at32" -#define DRV_VERSION "0.0.2" +#define DRV_VERSION "0.0.3" /* * CompactFlash controller memory layout relative to the base address: @@ -64,6 +64,8 @@ * Mode 2 | 8.3 | 240 ns | 0x07 * Mode 3 | 11.1 | 180 ns | 0x0f * Mode 4 | 16.7 | 120 ns | 0x1f + * + * Alter PIO_MASK below according to table to set maximal PIO mode. */ #define PIO_MASK (0x1f) @@ -85,36 +87,40 @@ struct at32_ide_info { */ static int pata_at32_setup_timing(struct device *dev, struct at32_ide_info *info, - const struct ata_timing *timing) + const struct ata_timing *ata) { - /* These two values are found through testing */ - const int min_recover = 25; - const int ncs_hold = 15; - struct smc_config *smc = &info->smc; + struct smc_timing timing; int active; int recover; + memset(&timing, 0, sizeof(struct smc_timing)); + /* Total cycle time */ - smc->read_cycle = timing->cyc8b; + timing.read_cycle = ata->cyc8b; /* DIOR <= CFIOR timings */ - smc->nrd_setup = timing->setup; - smc->nrd_pulse = timing->act8b; + timing.nrd_setup = ata->setup; + timing.nrd_pulse = ata->act8b; + timing.nrd_recover = ata->rec8b; + + /* Convert nanosecond timing to clock cycles */ + smc_set_timing(smc, &timing); - /* Compute recover, extend total cycle if needed */ - active = smc->nrd_setup + smc->nrd_pulse; + /* Add one extra cycle setup due to signal ring */ + smc->nrd_setup = smc->nrd_setup + 1; + + active = smc->nrd_setup + smc->nrd_pulse; recover = smc->read_cycle - active; - if (recover < min_recover) { - smc->read_cycle = active + min_recover; - recover = min_recover; - } + /* Need at least two cycles recovery */ + if (recover < 2) + smc->read_cycle = active + 2; /* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */ - smc->ncs_read_setup = 0; - smc->ncs_read_pulse = active + ncs_hold; + smc->ncs_read_setup = 1; + smc->ncs_read_pulse = smc->read_cycle - 2; /* Write timings same as read timings */ smc->write_cycle = smc->read_cycle; @@ -123,11 +129,13 @@ static int pata_at32_setup_timing(struct device *dev, smc->ncs_write_setup = smc->ncs_read_setup; smc->ncs_write_pulse = smc->ncs_read_pulse; - /* Do some debugging output */ - dev_dbg(dev, "SMC: C=%d S=%d P=%d R=%d NCSS=%d NCSP=%d NCSR=%d\n", + /* Do some debugging output of ATA and SMC timings */ + dev_dbg(dev, "ATA: C=%d S=%d P=%d R=%d\n", + ata->cyc8b, ata->setup, ata->act8b, ata->rec8b); + + dev_dbg(dev, "SMC: C=%d S=%d P=%d NS=%d NP=%d\n", smc->read_cycle, smc->nrd_setup, smc->nrd_pulse, - recover, smc->ncs_read_setup, smc->ncs_read_pulse, - smc->read_cycle - smc->ncs_read_pulse); + smc->ncs_read_setup, smc->ncs_read_pulse); /* Finally, configure the SMC */ return smc_set_configuration(info->cs, smc); @@ -182,7 +190,6 @@ static struct scsi_host_template at32_sht = { }; static struct ata_port_operations at32_port_ops = { - .port_disable = ata_port_disable, .set_piomode = pata_at32_set_piomode, .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -203,7 +210,6 @@ static struct ata_port_operations at32_port_ops = { .irq_clear = pata_at32_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_sff_port_start, }; @@ -223,8 +229,7 @@ static int __init pata_at32_init_one(struct device *dev, /* Setup ATA bindings */ ap->ops = &at32_port_ops; ap->pio_mask = PIO_MASK; - ap->flags = ATA_FLAG_MMIO | ATA_FLAG_SLAVE_POSS - | ATA_FLAG_PIO_POLLING; + ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_SLAVE_POSS; /* * Since all 8-bit taskfile transfers has to go on the lower @@ -357,12 +362,12 @@ static int __init pata_at32_probe(struct platform_device *pdev) info->smc.tdf_mode = 0; /* TDF optimization disabled */ info->smc.tdf_cycles = 0; /* No TDF wait cycles */ - /* Setup ATA timing */ + /* Setup SMC to ATA timing */ ret = pata_at32_setup_timing(dev, info, &initial_timing); if (ret) goto err_setup_timing; - /* Setup ATA addresses */ + /* Map ATA address space */ ret = -ENOMEM; info->ide_addr = devm_ioremap(dev, info->res_ide.start, 16); info->alt_addr = devm_ioremap(dev, info->res_alt.start, 16); @@ -373,7 +378,7 @@ static int __init pata_at32_probe(struct platform_device *pdev) pata_at32_debug_bus(dev, info); #endif - /* Register ATA device */ + /* Setup and register ATA device */ ret = pata_at32_init_one(dev, info); if (ret) goto err_ata_device;