From: Bich HEMON Date: Mon, 12 Mar 2018 09:50:05 +0000 (+0000) Subject: serial: stm32: add support for RS485 hardware control mode X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1bcda09d291081a7732fcaa9d1745312404a4e36;p=openwrt%2Fstaging%2Fblogic.git serial: stm32: add support for RS485 hardware control mode Implement Driver Enable signal (DE) to activate the transmission mode of the external transceiver. Signed-off-by: Yves Coppeaux Signed-off-by: Bich Hemon Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 0fa735b60f2d..345fbf314269 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -62,6 +62,113 @@ static void stm32_clr_bits(struct uart_port *port, u32 reg, u32 bits) writel_relaxed(val, port->membase + reg); } +static void stm32_config_reg_rs485(u32 *cr1, u32 *cr3, u32 delay_ADE, + u32 delay_DDE, u32 baud) +{ + u32 rs485_deat_dedt; + u32 rs485_deat_dedt_max = (USART_CR1_DEAT_MASK >> USART_CR1_DEAT_SHIFT); + bool over8; + + *cr3 |= USART_CR3_DEM; + over8 = *cr1 & USART_CR1_OVER8; + + if (over8) + rs485_deat_dedt = delay_ADE * baud * 8; + else + rs485_deat_dedt = delay_ADE * baud * 16; + + rs485_deat_dedt = DIV_ROUND_CLOSEST(rs485_deat_dedt, 1000); + rs485_deat_dedt = rs485_deat_dedt > rs485_deat_dedt_max ? + rs485_deat_dedt_max : rs485_deat_dedt; + rs485_deat_dedt = (rs485_deat_dedt << USART_CR1_DEAT_SHIFT) & + USART_CR1_DEAT_MASK; + *cr1 |= rs485_deat_dedt; + + if (over8) + rs485_deat_dedt = delay_DDE * baud * 8; + else + rs485_deat_dedt = delay_DDE * baud * 16; + + rs485_deat_dedt = DIV_ROUND_CLOSEST(rs485_deat_dedt, 1000); + rs485_deat_dedt = rs485_deat_dedt > rs485_deat_dedt_max ? + rs485_deat_dedt_max : rs485_deat_dedt; + rs485_deat_dedt = (rs485_deat_dedt << USART_CR1_DEDT_SHIFT) & + USART_CR1_DEDT_MASK; + *cr1 |= rs485_deat_dedt; +} + +static int stm32_config_rs485(struct uart_port *port, + struct serial_rs485 *rs485conf) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + struct stm32_usart_config *cfg = &stm32_port->info->cfg; + u32 usartdiv, baud, cr1, cr3; + bool over8; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + stm32_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + + port->rs485 = *rs485conf; + + rs485conf->flags |= SER_RS485_RX_DURING_TX; + + if (rs485conf->flags & SER_RS485_ENABLED) { + cr1 = readl_relaxed(port->membase + ofs->cr1); + cr3 = readl_relaxed(port->membase + ofs->cr3); + usartdiv = readl_relaxed(port->membase + ofs->brr); + usartdiv = usartdiv & GENMASK(15, 0); + over8 = cr1 & USART_CR1_OVER8; + + if (over8) + usartdiv = usartdiv | (usartdiv & GENMASK(4, 0)) + << USART_BRR_04_R_SHIFT; + + baud = DIV_ROUND_CLOSEST(port->uartclk, usartdiv); + stm32_config_reg_rs485(&cr1, &cr3, + rs485conf->delay_rts_before_send, + rs485conf->delay_rts_after_send, baud); + + if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { + cr3 &= ~USART_CR3_DEP; + rs485conf->flags &= ~SER_RS485_RTS_AFTER_SEND; + } else { + cr3 |= USART_CR3_DEP; + rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; + } + + writel_relaxed(cr3, port->membase + ofs->cr3); + writel_relaxed(cr1, port->membase + ofs->cr1); + } else { + stm32_clr_bits(port, ofs->cr3, USART_CR3_DEM | USART_CR3_DEP); + stm32_clr_bits(port, ofs->cr1, + USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK); + } + + stm32_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static int stm32_init_rs485(struct uart_port *port, + struct platform_device *pdev) +{ + struct serial_rs485 *rs485conf = &port->rs485; + + rs485conf->flags = 0; + rs485conf->delay_rts_before_send = 0; + rs485conf->delay_rts_after_send = 0; + + if (!pdev->dev.of_node) + return -ENODEV; + + uart_get_rs485_mode(&pdev->dev, rs485conf); + + return 0; +} + static int stm32_pending_rx(struct uart_port *port, u32 *sr, int *last_res, bool threaded) { @@ -498,6 +605,7 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; struct stm32_usart_config *cfg = &stm32_port->info->cfg; + struct serial_rs485 *rs485conf = &port->rs485; unsigned int baud; u32 usartdiv, mantissa, fraction, oversampling; tcflag_t cflag = termios->c_cflag; @@ -515,7 +623,7 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, writel_relaxed(0, port->membase + ofs->cr1); cr1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_RXNEIE; - cr1 |= BIT(cfg->uart_enable_bit); + if (stm32_port->fifoen) cr1 |= USART_CR1_FIFOEN; cr2 = 0; @@ -553,9 +661,11 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, */ if (usartdiv < 16) { oversampling = 8; + cr1 |= USART_CR1_OVER8; stm32_set_bits(port, ofs->cr1, USART_CR1_OVER8); } else { oversampling = 16; + cr1 &= ~USART_CR1_OVER8; stm32_clr_bits(port, ofs->cr1, USART_CR1_OVER8); } @@ -592,10 +702,28 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, if (stm32_port->rx_ch) cr3 |= USART_CR3_DMAR; + if (rs485conf->flags & SER_RS485_ENABLED) { + stm32_config_reg_rs485(&cr1, &cr3, + rs485conf->delay_rts_before_send, + rs485conf->delay_rts_after_send, baud); + if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { + cr3 &= ~USART_CR3_DEP; + rs485conf->flags &= ~SER_RS485_RTS_AFTER_SEND; + } else { + cr3 |= USART_CR3_DEP; + rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; + } + + } else { + cr3 &= ~(USART_CR3_DEM | USART_CR3_DEP); + cr1 &= ~(USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK); + } + writel_relaxed(cr3, port->membase + ofs->cr3); writel_relaxed(cr2, port->membase + ofs->cr2); writel_relaxed(cr1, port->membase + ofs->cr1); + stm32_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); spin_unlock_irqrestore(&port->lock, flags); } diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h index 2294d0f05872..6f294e280ea3 100644 --- a/drivers/tty/serial/stm32-usart.h +++ b/drivers/tty/serial/stm32-usart.h @@ -135,6 +135,7 @@ struct stm32_usart_info stm32h7_info = { #define USART_BRR_DIV_F_MASK GENMASK(3, 0) #define USART_BRR_DIV_M_MASK GENMASK(15, 4) #define USART_BRR_DIV_M_SHIFT 4 +#define USART_BRR_04_R_SHIFT 1 /* USART_CR1 */ #define USART_CR1_SBK BIT(0) @@ -162,6 +163,8 @@ struct stm32_usart_info stm32h7_info = { #define USART_CR1_M1 BIT(28) /* F7 */ #define USART_CR1_IE_MASK (GENMASK(8, 4) | BIT(14) | BIT(26) | BIT(27)) #define USART_CR1_FIFOEN BIT(29) /* H7 */ +#define USART_CR1_DEAT_SHIFT 21 +#define USART_CR1_DEDT_SHIFT 16 /* USART_CR2 */ #define USART_CR2_ADD_MASK GENMASK(3, 0) /* F4 */