From: Markus Stockhausen Date: Mon, 9 Sep 2024 05:58:19 +0000 (-0400) Subject: realtek: 6.6: refresh patch 318-add-rtl83xx-clk-support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1bbd5fdab64c1417d4723da7c900710dc22a7146;p=openwrt%2Fstaging%2Fxback.git realtek: 6.6: refresh patch 318-add-rtl83xx-clk-support No content changes. Only take over the new patch locations. With this patch all platform specific changes for kernel 6.6 are in place. Realtek devices are bootable from serial console. VPE is fully functional on devices that support it. The switch functions (ethernet and DSA) are not enabled yet. Boot tested on RTL8380 (Linksys LGS310C) and RTL8393 (Zyxel GS1920-24). Signed-off-by: Markus Stockhausen --- diff --git a/target/linux/realtek/patches-6.6/318-add-rtl83xx-clk-support.patch b/target/linux/realtek/patches-6.6/318-add-rtl83xx-clk-support.patch index 7d063d4faa..e75260a638 100644 --- a/target/linux/realtek/patches-6.6/318-add-rtl83xx-clk-support.patch +++ b/target/linux/realtek/patches-6.6/318-add-rtl83xx-clk-support.patch @@ -13,8 +13,8 @@ Submitted-by: Markus Stockhausen --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig -@@ -406,6 +406,7 @@ source "drivers/clk/mstar/Kconfig" - source "drivers/clk/mvebu/Kconfig" +@@ -484,6 +484,7 @@ source "drivers/clk/mvebu/Kconfig" + source "drivers/clk/nuvoton/Kconfig" source "drivers/clk/pistachio/Kconfig" source "drivers/clk/qcom/Kconfig" +source "drivers/clk/realtek/Kconfig" @@ -23,7 +23,7 @@ Submitted-by: Markus Stockhausen source "drivers/clk/rockchip/Kconfig" --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile -@@ -101,6 +101,7 @@ obj-$(CONFIG_COMMON_CLK_PISTACHIO) += pi +@@ -112,6 +112,7 @@ obj-$(CONFIG_COMMON_CLK_PISTACHIO) += pi obj-$(CONFIG_COMMON_CLK_PXA) += pxa/ obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/ obj-y += ralink/