From: Mathias Kresin Date: Sat, 4 Feb 2017 10:02:36 +0000 (+0100) Subject: ramips: fix Airlink AR725W factory image build X-Git-Tag: v18.06.0-rc1~3801 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1ba7fa652cffffabb77f23a4d745633050c5c175;p=openwrt%2Fstaging%2Fpepe2k.git ramips: fix Airlink AR725W factory image build The factory image can't be bigger than 3328 KByte. If the image is bigger than that, the gemtek-header tool throws an error and breaks the build. Make sure the output file to which the gemtek header should be added exists and wasn't removed during the check-size step because of it size. This will prevent hard errors in case the factory image is to big similar to what is done for sysupgrade images. Signed-off-by: Mathias Kresin --- diff --git a/target/linux/ramips/image/rt288x.mk b/target/linux/ramips/image/rt288x.mk index fbe50a2824..33830a6e78 100644 --- a/target/linux/ramips/image/rt288x.mk +++ b/target/linux/ramips/image/rt288x.mk @@ -3,7 +3,10 @@ # define Build/gemtek-header - mkheader_gemtek $@ $@.new $(1) && mv $@.new $@ + if [ -f $@ ]; then \ + mkheader_gemtek $@ $@.new $(1) && \ + mv $@.new $@; \ + fi endef define Device/ar670w @@ -22,7 +25,7 @@ define Device/ar725w DTS := AR725W DEVICE_TITLE := Gemtek AR725W IMAGES += factory.bin - IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \ + IMAGE/factory.bin := $$(sysupgrade_bin) | check-size 3328k | \ gemtek-header ar725w endef TARGET_DEVICES += ar725w