From: Boris Brezillon Date: Wed, 9 May 2018 13:00:42 +0000 (+0200) Subject: drm/vc4: Support the case where the DSI device is disabled X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1b9883eae82251b742627ebd9d544d1b1bddf121;p=openwrt%2Fstaging%2Fblogic.git drm/vc4: Support the case where the DSI device is disabled Having a device with a status property != "okay" in the DT is a valid use case, and we should not prevent the registration of the DRM device when the DSI device connected to the DSI controller is disabled. Consider the ENODEV return code as a valid result and do not expose the DSI encoder/connector when it happens. Signed-off-by: Boris Brezillon Reviewed-by: Eric Anholt Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-5-boris.brezillon@bootlin.com --- diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c index 9c8e89372d1c..0c607eb33d7e 100644 --- a/drivers/gpu/drm/vc4/vc4_dsi.c +++ b/drivers/gpu/drm/vc4/vc4_dsi.c @@ -1612,8 +1612,18 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, &dsi->bridge); - if (ret) + if (ret) { + /* If the bridge or panel pointed by dev->of_node is not + * enabled, just return 0 here so that we don't prevent the DRM + * dev from being registered. Of course that means the DSI + * encoder won't be exposed, but that's not a problem since + * nothing is connected to it. + */ + if (ret == -ENODEV) + return 0; + return ret; + } if (panel) { dsi->bridge = devm_drm_panel_bridge_add(dev, panel, @@ -1664,7 +1674,8 @@ static void vc4_dsi_unbind(struct device *dev, struct device *master, struct vc4_dev *vc4 = to_vc4_dev(drm); struct vc4_dsi *dsi = dev_get_drvdata(dev); - pm_runtime_disable(dev); + if (dsi->bridge) + pm_runtime_disable(dev); vc4_dsi_encoder_destroy(dsi->encoder);