From: Christian Lamparter Date: Sun, 17 Dec 2017 13:59:58 +0000 (+0100) Subject: apm821xx: dts: rename devices dts files to include the manufacturer X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1adeecf0d3ab6ba4e485bd3ad0749711d8aabac8;p=openwrt%2Fstaging%2Fkaloz.git apm821xx: dts: rename devices dts files to include the manufacturer This patch rename all the DT source files in order to match upstream's "manufacturer-device.dts" format. Please note that the DEVICE_DTB isn't changed. This is because the u-boot of the MyBook Live defines the fdt_file variable to be "apollo3g/apollo3g.dtb". Signed-off-by: Christian Lamparter --- diff --git a/target/linux/apm821xx/dts/MR24.dts b/target/linux/apm821xx/dts/MR24.dts deleted file mode 100644 index 2c2f8d281b..0000000000 --- a/target/linux/apm821xx/dts/MR24.dts +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Device Tree Source for Meraki MR24 (Ikarem) - * - * Copyright (C) 2016 Chris Blake - * - * Based on Cisco Meraki GPL Release r23-20150601 MR24 DTS - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -#include "apm82181.dtsi" - -/ { - model = "Meraki MR24 Access Point"; - compatible = "meraki,mr24", "meraki,ikarem", "apm,bluestone"; - - aliases { - serial0 = &UART1; - led-boot = &status; - led-failsafe = &failsafe; - led-running = &status; - led-upgrade = &status; - }; - - chosen { - linux,stdout-path = "/plb/opb/serial@ef600400"; - }; - -}; - - -&CRYPTO { - status = "okay"; -}; - -&PKA { - status = "okay"; -}; - -&TRNG { - status = "okay"; -}; - -&EBC0 { - /* Ikarem has 32MB of NAND */ - ndfc@1,0 { - status = "okay"; - /* 32 MiB NAND Flash */ - nand { - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x00170000>; - read-only; - }; - - partition@170000 { - label = "oops"; - reg = <0x00170000 0x00010000>; - }; - - partition@180000 { - label = "ubi"; - reg = <0x00180000 0x01e80000>; - }; - }; - }; -}; - -&UART1 { - status = "okay"; -}; - -&GPIO0 { - status = "okay"; -}; - -&IIC0 { - status = "okay"; - /* Boot ROM is at 0x52-0x53, do not touch */ - /* Unknown chip at 0x6e, not sure what it is */ -}; - -&EMAC0 { - status = "okay"; -}; - -&POB0 { - gpio-leds { - compatible = "gpio-leds"; - - status: power-green { - label = "mr24:green:power"; - gpios = <&GPIO0 18 GPIO_ACTIVE_LOW>; - }; - - failsafe: power-orange { - label = "mr24:orange:power"; - gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "mr24:green:wan"; - gpios = <&GPIO0 17 GPIO_ACTIVE_LOW>; - }; - - ssi-0 { - label = "mr24:green:wifi1"; - gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>; - }; - - ssi-1 { - label = "mr24:green:wifi2"; - gpios = <&GPIO0 22 GPIO_ACTIVE_LOW>; - }; - - ssi-2 { - label = "mr24:green:wifi3"; - gpios = <&GPIO0 21 GPIO_ACTIVE_LOW>; - }; - - ssi-3 { - label = "mr24:green:wifi4"; - gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_keys_polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <60>; /* 3 * 20 = 60ms */ - autorepeat; - - button@1 { - label = "Reset button"; - linux,code = ; - gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&PCIE0 { - status = "okay"; -}; - -&MSI { - status = "okay"; -}; diff --git a/target/linux/apm821xx/dts/MX60.dts b/target/linux/apm821xx/dts/MX60.dts deleted file mode 100644 index 32e5c859e8..0000000000 --- a/target/linux/apm821xx/dts/MX60.dts +++ /dev/null @@ -1,190 +0,0 @@ -/* - * Device Tree Source for Meraki MX60/MX60W (Buckminster) - * - * Copyright (C) 2016 Chris Blake - * - * Based on Cisco Meraki DTS extracted from release wired-12-217818 - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -#include "apm82181.dtsi" - -/ { - model = "Meraki MX60/MX60W Security Appliance"; - compatible = "meraki,mx60", "meraki,buckminster", "apm,bluestone"; - - aliases { - serial0 = &UART1; - led-boot = &status; - led-failsafe = &failsafe; - led-running = &status; - led-upgrade = &status; - }; - - chosen { - linux,stdout-path = "/plb/opb/serial@ef600400"; - }; - -}; - -&CRYPTO { - status = "okay"; -}; - -&PKA { - status = "okay"; -}; - -&TRNG { - status = "okay"; -}; - -&USBOTG0 { - status = "okay"; - dr_mode = "host"; -}; - -&EBC0 { - /* Buckminster has 1GiB of NAND */ - ndfc@1,0 { - status = "okay"; - nand { - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x00100000>; - read-only; - }; - - partition@100000 { - label = "u-boot-env"; - reg = <0x00100000 0x00100000>; - read-only; - }; - - partition@200000 { - label = "oops"; - reg = <0x00200000 0x00040000>; - }; - - partition@240000 { - label = "ubi"; - reg = <0x00240000 0x3fdc0000>; - }; - - all { - label = "all"; - reg = <0x00000000 0x40000000>; - }; - }; - }; -}; - -&UART1 { - status = "okay"; -}; - -&GPIO0 { - status = "okay"; -}; - -&IIC0 { - status = "okay"; -}; - -&EMAC0 { - status = "okay"; - phy-handle = <&phy0>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - phy0: ethernet-phy@0 { - device_type = "ethernet-phy"; - reg = <0>; - qca,ar8327-initvals = < - 0x0010 0x40000000 - 0x0624 0x007f7f7f - 0x0004 0x07a00000 /* PAD0_MODE */ - 0x000c 0x01000000 /* PAD6_MODE */ - 0x007c 0x0000007e /* PORT0_STATUS */ - >; - }; - }; -}; - -&POB0 { - gpio-leds { - compatible = "gpio-leds"; - - status: power-green { - label = "mx60:green:power"; - gpios = <&GPIO0 18 GPIO_ACTIVE_LOW>; - }; - - failsafe: power-orange { - label = "mx60:orange:power"; - gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>; - }; - - wan-green { - label = "mx60:green:wan"; - gpios = <&GPIO0 17 GPIO_ACTIVE_LOW>; - }; - - wan-orange { - label = "mx60:orange:wan"; - gpios = <&GPIO0 15 GPIO_ACTIVE_LOW>; - }; - - lan1 { - label = "mx60:green:lan1"; - gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>; - }; - - lan2 { - label = "mx60:green:lan2"; - gpios = <&GPIO0 21 GPIO_ACTIVE_LOW>; - }; - - lan3 { - label = "mx60:green:lan3"; - gpios = <&GPIO0 22 GPIO_ACTIVE_LOW>; - }; - - lan4 { - label = "mx60:green:lan4"; - gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_keys_polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <60>; /* 3 * 20 = 60ms */ - autorepeat; - - button@1 { - label = "Reset button"; - linux,code = ; - gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&PCIE0 { - /* Leave this enabled as u-boot on the MX60 will disable it for us */ - status = "okay"; -}; - -&MSI { - status = "okay"; -}; diff --git a/target/linux/apm821xx/dts/apollo3g-duo.dts b/target/linux/apm821xx/dts/apollo3g-duo.dts deleted file mode 100644 index 4f6cc506f5..0000000000 --- a/target/linux/apm821xx/dts/apollo3g-duo.dts +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Device Tree Source for AMCC Canyonlands (460EX) - * - * Copyright 2008 DENX Software Engineering, Stefan Roese - * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -#include "apollo3g.dtsi" - -/ { - compatible = "wd,mybooklive-duo", "amcc,apollo3g"; - model = "MyBook Live Duo"; -}; - -&SATA0 { - status = "okay"; -}; - -&USBOTG0 { - status = "okay"; - dr_mode = "host"; -}; - -&GPIO1 { - enable-usb { - status = "okay"; - }; - - enable-port0 { - status = "okay"; - }; -}; diff --git a/target/linux/apm821xx/dts/apollo3g.dts b/target/linux/apm821xx/dts/apollo3g.dts deleted file mode 100644 index d841352292..0000000000 --- a/target/linux/apm821xx/dts/apollo3g.dts +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright 2008 DENX Software Engineering, Stefan Roese - * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -#include "apollo3g.dtsi" - -/ { - compatible = "wd,mybooklive", "amcc,apollo3g"; - model = "MyBook Live"; -}; diff --git a/target/linux/apm821xx/dts/meraki-mr24.dts b/target/linux/apm821xx/dts/meraki-mr24.dts new file mode 100644 index 0000000000..2c2f8d281b --- /dev/null +++ b/target/linux/apm821xx/dts/meraki-mr24.dts @@ -0,0 +1,155 @@ +/* + * Device Tree Source for Meraki MR24 (Ikarem) + * + * Copyright (C) 2016 Chris Blake + * + * Based on Cisco Meraki GPL Release r23-20150601 MR24 DTS + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "apm82181.dtsi" + +/ { + model = "Meraki MR24 Access Point"; + compatible = "meraki,mr24", "meraki,ikarem", "apm,bluestone"; + + aliases { + serial0 = &UART1; + led-boot = &status; + led-failsafe = &failsafe; + led-running = &status; + led-upgrade = &status; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600400"; + }; + +}; + + +&CRYPTO { + status = "okay"; +}; + +&PKA { + status = "okay"; +}; + +&TRNG { + status = "okay"; +}; + +&EBC0 { + /* Ikarem has 32MB of NAND */ + ndfc@1,0 { + status = "okay"; + /* 32 MiB NAND Flash */ + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00170000>; + read-only; + }; + + partition@170000 { + label = "oops"; + reg = <0x00170000 0x00010000>; + }; + + partition@180000 { + label = "ubi"; + reg = <0x00180000 0x01e80000>; + }; + }; + }; +}; + +&UART1 { + status = "okay"; +}; + +&GPIO0 { + status = "okay"; +}; + +&IIC0 { + status = "okay"; + /* Boot ROM is at 0x52-0x53, do not touch */ + /* Unknown chip at 0x6e, not sure what it is */ +}; + +&EMAC0 { + status = "okay"; +}; + +&POB0 { + gpio-leds { + compatible = "gpio-leds"; + + status: power-green { + label = "mr24:green:power"; + gpios = <&GPIO0 18 GPIO_ACTIVE_LOW>; + }; + + failsafe: power-orange { + label = "mr24:orange:power"; + gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "mr24:green:wan"; + gpios = <&GPIO0 17 GPIO_ACTIVE_LOW>; + }; + + ssi-0 { + label = "mr24:green:wifi1"; + gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>; + }; + + ssi-1 { + label = "mr24:green:wifi2"; + gpios = <&GPIO0 22 GPIO_ACTIVE_LOW>; + }; + + ssi-2 { + label = "mr24:green:wifi3"; + gpios = <&GPIO0 21 GPIO_ACTIVE_LOW>; + }; + + ssi-3 { + label = "mr24:green:wifi4"; + gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys_polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <60>; /* 3 * 20 = 60ms */ + autorepeat; + + button@1 { + label = "Reset button"; + linux,code = ; + gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&PCIE0 { + status = "okay"; +}; + +&MSI { + status = "okay"; +}; diff --git a/target/linux/apm821xx/dts/meraki-mx60.dts b/target/linux/apm821xx/dts/meraki-mx60.dts new file mode 100644 index 0000000000..32e5c859e8 --- /dev/null +++ b/target/linux/apm821xx/dts/meraki-mx60.dts @@ -0,0 +1,190 @@ +/* + * Device Tree Source for Meraki MX60/MX60W (Buckminster) + * + * Copyright (C) 2016 Chris Blake + * + * Based on Cisco Meraki DTS extracted from release wired-12-217818 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "apm82181.dtsi" + +/ { + model = "Meraki MX60/MX60W Security Appliance"; + compatible = "meraki,mx60", "meraki,buckminster", "apm,bluestone"; + + aliases { + serial0 = &UART1; + led-boot = &status; + led-failsafe = &failsafe; + led-running = &status; + led-upgrade = &status; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600400"; + }; + +}; + +&CRYPTO { + status = "okay"; +}; + +&PKA { + status = "okay"; +}; + +&TRNG { + status = "okay"; +}; + +&USBOTG0 { + status = "okay"; + dr_mode = "host"; +}; + +&EBC0 { + /* Buckminster has 1GiB of NAND */ + ndfc@1,0 { + status = "okay"; + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x00100000 0x00100000>; + read-only; + }; + + partition@200000 { + label = "oops"; + reg = <0x00200000 0x00040000>; + }; + + partition@240000 { + label = "ubi"; + reg = <0x00240000 0x3fdc0000>; + }; + + all { + label = "all"; + reg = <0x00000000 0x40000000>; + }; + }; + }; +}; + +&UART1 { + status = "okay"; +}; + +&GPIO0 { + status = "okay"; +}; + +&IIC0 { + status = "okay"; +}; + +&EMAC0 { + status = "okay"; + phy-handle = <&phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + qca,ar8327-initvals = < + 0x0010 0x40000000 + 0x0624 0x007f7f7f + 0x0004 0x07a00000 /* PAD0_MODE */ + 0x000c 0x01000000 /* PAD6_MODE */ + 0x007c 0x0000007e /* PORT0_STATUS */ + >; + }; + }; +}; + +&POB0 { + gpio-leds { + compatible = "gpio-leds"; + + status: power-green { + label = "mx60:green:power"; + gpios = <&GPIO0 18 GPIO_ACTIVE_LOW>; + }; + + failsafe: power-orange { + label = "mx60:orange:power"; + gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>; + }; + + wan-green { + label = "mx60:green:wan"; + gpios = <&GPIO0 17 GPIO_ACTIVE_LOW>; + }; + + wan-orange { + label = "mx60:orange:wan"; + gpios = <&GPIO0 15 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "mx60:green:lan1"; + gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "mx60:green:lan2"; + gpios = <&GPIO0 21 GPIO_ACTIVE_LOW>; + }; + + lan3 { + label = "mx60:green:lan3"; + gpios = <&GPIO0 22 GPIO_ACTIVE_LOW>; + }; + + lan4 { + label = "mx60:green:lan4"; + gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys_polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <60>; /* 3 * 20 = 60ms */ + autorepeat; + + button@1 { + label = "Reset button"; + linux,code = ; + gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&PCIE0 { + /* Leave this enabled as u-boot on the MX60 will disable it for us */ + status = "okay"; +}; + +&MSI { + status = "okay"; +}; diff --git a/target/linux/apm821xx/dts/netgear-wndr4700.dts b/target/linux/apm821xx/dts/netgear-wndr4700.dts new file mode 100644 index 0000000000..2e0addf74b --- /dev/null +++ b/target/linux/apm821xx/dts/netgear-wndr4700.dts @@ -0,0 +1,409 @@ +/* + * Device Tree Source for Netgear WNDR4700/WNDR4720 Series + * + * Copyright 2008 DENX Software Engineering, Stefan Roese + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "apm82181.dtsi" +#include + +/ { + model = "Netgear WNDR4700/WNDR4720 Series"; + compatible = "netgear,wndr4700"; + + aliases { + serial0 = &UART0; + led-boot = &status; + led-failsafe = &failsafe; + led-running = &status; + led-upgrade = &status; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <10000>; /* milliseconds */ + polling-delay = <20000>; /* milliseconds */ + + thermal-sensors = <&temp0 1>; + + trips { + /* + * Once the thermal governers are a bit smarter + * and do hysteresis properly, we can disable + * the fan when the HDD and CPU has < 39 C. + */ + cpu_alert0: cpu-alert0 { + temperature = <25000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_alert1: cpu-alert1 { + temperature = <27000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + + cpu_alert2: cpu-alert2 { + temperature = <65000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + + cpu_alert3: cpu-alert3 { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + + cpu_alert4: cpu-alert4 { + temperature = <75000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + + cpu_alert5: cpu-alert5 { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + + cpu_alert6: cpu-alert6 { + temperature = <850000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + + cpu_crit: cpu-crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&fan0 THERMAL_NO_LIMIT 0>; + }; + + map1 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 1 87>; + }; + + map2 { + trip = <&cpu_alert2>; + cooling-device = <&fan0 88 100>; + }; + + map3 { + trip = <&cpu_alert3>; + cooling-device = <&fan0 101 147>; + }; + + map4 { + trip = <&cpu_alert4>; + cooling-device = <&fan0 148 207>; + }; + + map5 { + trip = <&cpu_alert5>; + cooling-device = <&fan0 208 231>; + }; + + map6 { + trip = <&cpu_alert6>; + cooling-device =<&fan0 232 THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +&CRYPTO { + status = "okay"; +}; + +&PKA { + status = "okay"; +}; + +&TRNG { + status = "okay"; +}; + +&SATA1 { + status = "okay"; +}; + +&USBOTG0 { + status = "okay"; + dr_mode = "host"; +}; + +&EBC0 { + ndfc@1,0 { + status = "okay"; + /* 128 MiB Nand Flash */ + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition0,0@0x00000000 { + label = "NAND 128MiB 3,3V 8-bit"; + reg = <0x00000000 0x08000000>; + read-only; + }; + + partition0,1@0x00000000 { + label = "uboot"; + reg = <0x00000000 0x00180000>; + read-only; + }; + + partition0,2@0x00180000 { + label = "device-tree"; + reg = <0x00180000 0x00020000>; + }; + + partition0,3@0x001a0000 { + label = "kernel"; + reg = <0x001a0000 0x001e0000>; + /* + * will also contain a fake/empty + * rootfs to fool Netgear's uboot + * rootfs integrety checks. + */ + }; + + partition0,4@0x00380000 { + label = "ubi"; + reg = <0x00380000 0x01660000>; + }; + + partition0,5@0x019e0000 { + label = "config"; + reg = <0x019e0000 0x00080000>; + read-only; + }; + + partition0,6@0x01a60000 { + label = "pot"; + reg = <0x01a60000 0x00080000>; + read-only; + }; + + partition0,7@0x01ae0000 { + label = "traffic_meter"; + reg = <0x01ae0000 0x00300000>; + read-only; + }; + + partition0,8@0x01de0000 { + label = "language"; + reg = <0x01de0000 0x001c0000>; + read-only; + }; + + partition0,9@0x01fa0000 { + label = "ecos"; + reg = <0x01fa0000 0x06020000>; + read-only; + }; + + partition0,10@0x07fc0000 { + label = "wifi_data"; + reg = <0x07fc0000 0x00040000>; + read-only; + }; + + partition0,11@0x00180000 { + label = "firmware"; + reg = <0x00180000 0x01860000>; + read-only; + }; + }; + }; +}; + +&UART0 { + status = "okay"; +}; + +&GPIO0 { + status = "okay"; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&UIC1 0x14>, + <&UIC1 0x1e>, + <&UIC1 0x1f>, + <&UIC2 0x19>; +}; + +&IIC0 { + status = "okay"; + + fan0: fan@1b { + compatible = "microchip,tc654"; + reg = <0x1b>; + cooling-min-level = <0>; + cooling-max-level = <255>; + #cooling-cells = <2>; /* min followed by max */ + + gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>; /* fan status */ + alarm-gpios = <&GPIO0 5 GPIO_ACTIVE_LOW>; /* fault */ + interrupt-parent = <&UIC3>; + interrupts = <0x16 IRQ_TYPE_EDGE_FALLING>; /* fault */ + }; + + temp0: temp@4d { + compatible = "gmt,g781"; + reg = <0x4d>; + #thermal-sensor-cells = <1>; + + /* + * The LM90 has two sensors: + * temp0 -> internal to LM90 + * temp1 -> external NTC near CPU + */ + }; +}; + + +&EMAC0 { + status = "okay"; + phy-handle = <&phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + qca,ar8327-initvals = < + 0x0010 0x40000000 + 0x0624 0x007f7f7f + 0x0004 0x07a00000 /* PAD0_MODE */ + 0x000c 0x01000000 /* PAD6_MODE */ + 0x007c 0x0000007e /* PORT0_STATUS */ + >; + }; + }; +}; + +&POB0 { + gpio_keys_polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <2>; + autorepeat; + poll-interval = <60>; /* 3 * 20 = 60ms */ + + reset { + label = "Reset button"; + linux,code = ; + gpios = <&GPIO0 15 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&UIC1>; + interrupts = <0x14 IRQ_TYPE_EDGE_FALLING>; + }; + + backup_hd { + label = "Backup HD button"; + gpios = <&GPIO0 19 GPIO_ACTIVE_HIGH>; + linux,code = ; + interrupt-parent = <&UIC1>; + interrupts = <0x1e IRQ_TYPE_EDGE_FALLING>; + }; + + rfkill { + label = "RFKILL button"; + gpios = <&GPIO0 20 GPIO_ACTIVE_HIGH>; + linux,code = ; + interrupt-parent = <&UIC1>; + interrupts = <0x1f IRQ_TYPE_EDGE_FALLING>; + }; + + wps { + label = "WPS button"; + gpios = <&GPIO0 23 GPIO_ACTIVE_HIGH>; + linux,code = ; + interrupt-parent = <&UIC2>; + interrupts = <0x19 IRQ_TYPE_EDGE_FALLING>; + }; + + sdcard { + label = "SDCard inserted"; + gpios = <&GPIO0 7 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + status: power-green { + label = "wndr4700:green:power"; + gpios = <&GPIO0 8 GPIO_ACTIVE_HIGH>; + }; + + failsafe: power-orange { + label = "wndr4700:orange:power"; + gpios = <&GPIO0 9 GPIO_ACTIVE_LOW>; + linux,default-trigger = "panic"; + }; + + usb-blue { + label = "wndr4700:blue:usb"; + gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>; + }; + + logo-white { + label = "wndr4700:white:logo"; + gpios = <&GPIO0 11 GPIO_ACTIVE_HIGH>; + }; + + wan-yellow { + label = "wndr4700:yellow:wan"; + gpios = <&GPIO0 3 GPIO_ACTIVE_HIGH>; + }; + + wan-green { + label = "wndr4700:green:wan"; + gpios = <&GPIO0 12 GPIO_ACTIVE_HIGH>; + }; + + hd-green { + label = "wndr4700:green:hd"; + gpios = <&GPIO0 14 GPIO_ACTIVE_HIGH>; + }; + + hd-red { + label = "wndr4700:red:hd"; + gpios = <&GPIO0 17 GPIO_ACTIVE_HIGH>; + }; + + wlan-blue { + label = "wndr4700:blue:wlan"; + gpios = <&GPIO0 18 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&PCIE0 { + status = "okay"; +}; + +&MSI { + status = "okay"; +}; diff --git a/target/linux/apm821xx/dts/wd-mybooklive-duo.dts b/target/linux/apm821xx/dts/wd-mybooklive-duo.dts new file mode 100644 index 0000000000..4f6cc506f5 --- /dev/null +++ b/target/linux/apm821xx/dts/wd-mybooklive-duo.dts @@ -0,0 +1,38 @@ +/* + * Device Tree Source for AMCC Canyonlands (460EX) + * + * Copyright 2008 DENX Software Engineering, Stefan Roese + * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "apollo3g.dtsi" + +/ { + compatible = "wd,mybooklive-duo", "amcc,apollo3g"; + model = "MyBook Live Duo"; +}; + +&SATA0 { + status = "okay"; +}; + +&USBOTG0 { + status = "okay"; + dr_mode = "host"; +}; + +&GPIO1 { + enable-usb { + status = "okay"; + }; + + enable-port0 { + status = "okay"; + }; +}; diff --git a/target/linux/apm821xx/dts/wd-mybooklive.dts b/target/linux/apm821xx/dts/wd-mybooklive.dts new file mode 100644 index 0000000000..d841352292 --- /dev/null +++ b/target/linux/apm821xx/dts/wd-mybooklive.dts @@ -0,0 +1,17 @@ +/* + * Copyright 2008 DENX Software Engineering, Stefan Roese + * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "apollo3g.dtsi" + +/ { + compatible = "wd,mybooklive", "amcc,apollo3g"; + model = "MyBook Live"; +}; diff --git a/target/linux/apm821xx/dts/wndr4700.dts b/target/linux/apm821xx/dts/wndr4700.dts deleted file mode 100644 index 2e0addf74b..0000000000 --- a/target/linux/apm821xx/dts/wndr4700.dts +++ /dev/null @@ -1,409 +0,0 @@ -/* - * Device Tree Source for Netgear WNDR4700/WNDR4720 Series - * - * Copyright 2008 DENX Software Engineering, Stefan Roese - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -#include "apm82181.dtsi" -#include - -/ { - model = "Netgear WNDR4700/WNDR4720 Series"; - compatible = "netgear,wndr4700"; - - aliases { - serial0 = &UART0; - led-boot = &status; - led-failsafe = &failsafe; - led-running = &status; - led-upgrade = &status; - }; - - chosen { - linux,stdout-path = "/plb/opb/serial@ef600300"; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <10000>; /* milliseconds */ - polling-delay = <20000>; /* milliseconds */ - - thermal-sensors = <&temp0 1>; - - trips { - /* - * Once the thermal governers are a bit smarter - * and do hysteresis properly, we can disable - * the fan when the HDD and CPU has < 39 C. - */ - cpu_alert0: cpu-alert0 { - temperature = <25000>; - hysteresis = <2000>; - type = "active"; - }; - - cpu_alert1: cpu-alert1 { - temperature = <27000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - - cpu_alert2: cpu-alert2 { - temperature = <65000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - - cpu_alert3: cpu-alert3 { - temperature = <70000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - - cpu_alert4: cpu-alert4 { - temperature = <75000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - - cpu_alert5: cpu-alert5 { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - - cpu_alert6: cpu-alert6 { - temperature = <850000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - - cpu_crit: cpu-crit { - temperature = <90000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = <&fan0 THERMAL_NO_LIMIT 0>; - }; - - map1 { - trip = <&cpu_alert1>; - cooling-device = <&fan0 1 87>; - }; - - map2 { - trip = <&cpu_alert2>; - cooling-device = <&fan0 88 100>; - }; - - map3 { - trip = <&cpu_alert3>; - cooling-device = <&fan0 101 147>; - }; - - map4 { - trip = <&cpu_alert4>; - cooling-device = <&fan0 148 207>; - }; - - map5 { - trip = <&cpu_alert5>; - cooling-device = <&fan0 208 231>; - }; - - map6 { - trip = <&cpu_alert6>; - cooling-device =<&fan0 232 THERMAL_NO_LIMIT>; - }; - }; - }; - }; -}; - -&CRYPTO { - status = "okay"; -}; - -&PKA { - status = "okay"; -}; - -&TRNG { - status = "okay"; -}; - -&SATA1 { - status = "okay"; -}; - -&USBOTG0 { - status = "okay"; - dr_mode = "host"; -}; - -&EBC0 { - ndfc@1,0 { - status = "okay"; - /* 128 MiB Nand Flash */ - nand { - #address-cells = <1>; - #size-cells = <1>; - - partition0,0@0x00000000 { - label = "NAND 128MiB 3,3V 8-bit"; - reg = <0x00000000 0x08000000>; - read-only; - }; - - partition0,1@0x00000000 { - label = "uboot"; - reg = <0x00000000 0x00180000>; - read-only; - }; - - partition0,2@0x00180000 { - label = "device-tree"; - reg = <0x00180000 0x00020000>; - }; - - partition0,3@0x001a0000 { - label = "kernel"; - reg = <0x001a0000 0x001e0000>; - /* - * will also contain a fake/empty - * rootfs to fool Netgear's uboot - * rootfs integrety checks. - */ - }; - - partition0,4@0x00380000 { - label = "ubi"; - reg = <0x00380000 0x01660000>; - }; - - partition0,5@0x019e0000 { - label = "config"; - reg = <0x019e0000 0x00080000>; - read-only; - }; - - partition0,6@0x01a60000 { - label = "pot"; - reg = <0x01a60000 0x00080000>; - read-only; - }; - - partition0,7@0x01ae0000 { - label = "traffic_meter"; - reg = <0x01ae0000 0x00300000>; - read-only; - }; - - partition0,8@0x01de0000 { - label = "language"; - reg = <0x01de0000 0x001c0000>; - read-only; - }; - - partition0,9@0x01fa0000 { - label = "ecos"; - reg = <0x01fa0000 0x06020000>; - read-only; - }; - - partition0,10@0x07fc0000 { - label = "wifi_data"; - reg = <0x07fc0000 0x00040000>; - read-only; - }; - - partition0,11@0x00180000 { - label = "firmware"; - reg = <0x00180000 0x01860000>; - read-only; - }; - }; - }; -}; - -&UART0 { - status = "okay"; -}; - -&GPIO0 { - status = "okay"; - #interrupt-cells = <2>; - interrupt-controller; - interrupts-extended = <&UIC1 0x14>, - <&UIC1 0x1e>, - <&UIC1 0x1f>, - <&UIC2 0x19>; -}; - -&IIC0 { - status = "okay"; - - fan0: fan@1b { - compatible = "microchip,tc654"; - reg = <0x1b>; - cooling-min-level = <0>; - cooling-max-level = <255>; - #cooling-cells = <2>; /* min followed by max */ - - gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>; /* fan status */ - alarm-gpios = <&GPIO0 5 GPIO_ACTIVE_LOW>; /* fault */ - interrupt-parent = <&UIC3>; - interrupts = <0x16 IRQ_TYPE_EDGE_FALLING>; /* fault */ - }; - - temp0: temp@4d { - compatible = "gmt,g781"; - reg = <0x4d>; - #thermal-sensor-cells = <1>; - - /* - * The LM90 has two sensors: - * temp0 -> internal to LM90 - * temp1 -> external NTC near CPU - */ - }; -}; - - -&EMAC0 { - status = "okay"; - phy-handle = <&phy0>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - phy0: ethernet-phy@0 { - device_type = "ethernet-phy"; - reg = <0>; - qca,ar8327-initvals = < - 0x0010 0x40000000 - 0x0624 0x007f7f7f - 0x0004 0x07a00000 /* PAD0_MODE */ - 0x000c 0x01000000 /* PAD6_MODE */ - 0x007c 0x0000007e /* PORT0_STATUS */ - >; - }; - }; -}; - -&POB0 { - gpio_keys_polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <2>; - autorepeat; - poll-interval = <60>; /* 3 * 20 = 60ms */ - - reset { - label = "Reset button"; - linux,code = ; - gpios = <&GPIO0 15 GPIO_ACTIVE_HIGH>; - interrupt-parent = <&UIC1>; - interrupts = <0x14 IRQ_TYPE_EDGE_FALLING>; - }; - - backup_hd { - label = "Backup HD button"; - gpios = <&GPIO0 19 GPIO_ACTIVE_HIGH>; - linux,code = ; - interrupt-parent = <&UIC1>; - interrupts = <0x1e IRQ_TYPE_EDGE_FALLING>; - }; - - rfkill { - label = "RFKILL button"; - gpios = <&GPIO0 20 GPIO_ACTIVE_HIGH>; - linux,code = ; - interrupt-parent = <&UIC1>; - interrupts = <0x1f IRQ_TYPE_EDGE_FALLING>; - }; - - wps { - label = "WPS button"; - gpios = <&GPIO0 23 GPIO_ACTIVE_HIGH>; - linux,code = ; - interrupt-parent = <&UIC2>; - interrupts = <0x19 IRQ_TYPE_EDGE_FALLING>; - }; - - sdcard { - label = "SDCard inserted"; - gpios = <&GPIO0 7 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - status: power-green { - label = "wndr4700:green:power"; - gpios = <&GPIO0 8 GPIO_ACTIVE_HIGH>; - }; - - failsafe: power-orange { - label = "wndr4700:orange:power"; - gpios = <&GPIO0 9 GPIO_ACTIVE_LOW>; - linux,default-trigger = "panic"; - }; - - usb-blue { - label = "wndr4700:blue:usb"; - gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>; - }; - - logo-white { - label = "wndr4700:white:logo"; - gpios = <&GPIO0 11 GPIO_ACTIVE_HIGH>; - }; - - wan-yellow { - label = "wndr4700:yellow:wan"; - gpios = <&GPIO0 3 GPIO_ACTIVE_HIGH>; - }; - - wan-green { - label = "wndr4700:green:wan"; - gpios = <&GPIO0 12 GPIO_ACTIVE_HIGH>; - }; - - hd-green { - label = "wndr4700:green:hd"; - gpios = <&GPIO0 14 GPIO_ACTIVE_HIGH>; - }; - - hd-red { - label = "wndr4700:red:hd"; - gpios = <&GPIO0 17 GPIO_ACTIVE_HIGH>; - }; - - wlan-blue { - label = "wndr4700:blue:wlan"; - gpios = <&GPIO0 18 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&PCIE0 { - status = "okay"; -}; - -&MSI { - status = "okay"; -}; diff --git a/target/linux/apm821xx/image/Makefile b/target/linux/apm821xx/image/Makefile index 217bff2c59..6efd3886d2 100644 --- a/target/linux/apm821xx/image/Makefile +++ b/target/linux/apm821xx/image/Makefile @@ -70,7 +70,7 @@ define Device/mr24 DEVICE_TITLE := Cisco Meraki MR24 DEVICE_PACKAGES := kmod-spi-gpio BOARD_NAME := mr24 - DEVICE_DTS := MR24 + DEVICE_DTS := meraki-mr24 BLOCKSIZE := 63k IMAGES := sysupgrade.tar DTB_SIZE := 64512 @@ -91,7 +91,7 @@ define Device/mx60 DEVICE_PACKAGES := kmod-spi-gpio kmod-usb-ledtrig-usbport kmod-usb-dwc2 \ kmod-usb-storage block-mount BOARD_NAME := mx60 - DEVICE_DTS := MX60 + DEVICE_DTS := meraki-mx60 BLOCKSIZE := 63k IMAGES := sysupgrade.tar DTB_SIZE := 64512 @@ -157,7 +157,7 @@ define Device/WNDR4700 kmod-nls-utf8 kmod-usb3 kmod-usb-dwc2 kmod-usb-storage \ partx-utils BOARD_NAME := wndr4700 - DEVICE_DTS := wndr4700 + DEVICE_DTS := netgear-wndr4700 PAGESIZE := 2048 SUBPAGESIZE := 512 BLOCKSIZE := 128k @@ -225,7 +225,7 @@ endef define Device/MyBookLiveSingle $(Device/MyBookLiveDefault) DEVICE_TITLE := Western Digital My Book Live - DEVICE_DTS := apollo3g + DEVICE_DTS := wd-mybooklive endef TARGET_DEVICES += MyBookLiveSingle @@ -234,7 +234,7 @@ define Device/MyBookLiveDuo $(Device/MyBookLiveDefault) DEVICE_TITLE := Western Digital My Book Live Duo DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-fs-vfat wpad-mini - DEVICE_DTS := apollo3g-duo + DEVICE_DTS := wd-mybooklive-duo endef TARGET_DEVICES += MyBookLiveDuo