From: Sascha Hauer <sascha@saschahauer.de>
Date: Tue, 12 Dec 2006 08:23:45 +0000 (+0100)
Subject: [ARM] 4013/1: clocksource driver for netx
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1a815aed1e03c73fcd0390109c7da9c69dc97490;p=openwrt%2Fstaging%2Fblogic.git

[ARM] 4013/1: clocksource driver for netx

Add a clocksource driver for netx systems

Signed-off-by: Luotao Fu <lfu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---

diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index 0993336c0b55..5773b55ef4a6 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -19,21 +19,14 @@
 
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clocksource.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/time.h>
 #include <asm/arch/netx-regs.h>
 
-/*
- * Returns number of us since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-static unsigned long netx_gettimeoffset(void)
-{
-	return readl(NETX_GPIO_COUNTER_CURRENT(0)) / 100;
-}
-
 /*
  * IRQ handler for the timer
  */
@@ -43,6 +36,7 @@ netx_timer_interrupt(int irq, void *dev_id)
 	write_seqlock(&xtime_lock);
 
 	timer_tick();
+
 	write_sequnlock(&xtime_lock);
 
 	/* acknowledge interrupt */
@@ -51,13 +45,26 @@ netx_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-
 static struct irqaction netx_timer_irq = {
 	.name           = "NetX Timer Tick",
 	.flags          = IRQF_DISABLED | IRQF_TIMER,
 	.handler        = netx_timer_interrupt,
 };
 
+cycle_t netx_get_cycles(void)
+{
+	return readl(NETX_GPIO_COUNTER_CURRENT(1));
+}
+
+static struct clocksource clocksource_netx = {
+	.name 		= "netx_timer",
+	.rating		= 200,
+	.read		= netx_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift 		= 20,
+	.is_continuous 	= 1,
+};
+
 /*
  * Set up timer interrupt
  */
@@ -80,9 +87,20 @@ static void __init netx_timer_init(void)
 		NETX_GPIO_COUNTER_CTRL(0));
 
 	setup_irq(NETX_IRQ_TIMER0, &netx_timer_irq);
+
+	/* Setup timer one for clocksource */
+        writel(0, NETX_GPIO_COUNTER_CTRL(1));
+        writel(0, NETX_GPIO_COUNTER_CURRENT(1));
+        writel(0xFFFFFFFF, NETX_GPIO_COUNTER_MAX(1));
+
+        writel(NETX_GPIO_COUNTER_CTRL_RUN,
+                NETX_GPIO_COUNTER_CTRL(1));
+
+	clocksource_netx.mult =
+		clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_netx.shift);
+	clocksource_register(&clocksource_netx);
 }
 
 struct sys_timer netx_timer = {
-	.init           = netx_timer_init,
-	.offset         = netx_gettimeoffset,
+	.init		= netx_timer_init,
 };