From: Vasundhara Volam Date: Mon, 14 Apr 2014 10:42:40 +0000 (+0530) Subject: be2net: Fix to reap TX compls till HW doesn't respond for some time X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1a3d0717f68345730ae939b74b952200fb165f45;p=openwrt%2Fstaging%2Fblogic.git be2net: Fix to reap TX compls till HW doesn't respond for some time be_close() currently waits for a max of 200ms to receive all pending TX compls. This timeout value was roughly calculated based on 10G transmission speeds and the TX queue depth. This timeout may not be enough when the link is operating at lower speeds or in multi-channel/SR-IOV configs with TX-rate limiting setting. It is hard to calculate a "proper timeout value" that works in all configurations. This patch solves this problem by continuing to reap TX completions till the HW is completely silent for a period of 10ms or a HW error is detected. v2: implements the new scheme (as suggested by David Laight) instead of just waiting longer than 200ms for reaping all completions. Signed-off-by: Vasundhara Volam Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 3e6df47b6973..80f754d7cf65 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2033,11 +2033,13 @@ static void be_tx_compl_clean(struct be_adapter *adapter) bool dummy_wrb; int i, pending_txqs; - /* Wait for a max of 200ms for all the tx-completions to arrive. */ + /* Stop polling for compls when HW has been silent for 10ms */ do { pending_txqs = adapter->num_tx_qs; for_all_tx_queues(adapter, txo, i) { + cmpl = 0; + num_wrbs = 0; txq = &txo->q; while ((txcp = be_tx_compl_get(&txo->cq))) { end_idx = @@ -2050,14 +2052,13 @@ static void be_tx_compl_clean(struct be_adapter *adapter) if (cmpl) { be_cq_notify(adapter, txo->cq.id, false, cmpl); atomic_sub(num_wrbs, &txq->used); - cmpl = 0; - num_wrbs = 0; + timeo = 0; } if (atomic_read(&txq->used) == 0) pending_txqs--; } - if (pending_txqs == 0 || ++timeo > 200) + if (pending_txqs == 0 || ++timeo > 10 || be_hw_error(adapter)) break; mdelay(1);