From: Hauke Mehrtens Date: Sat, 29 Feb 2020 15:38:58 +0000 (+0100) Subject: sunxi: Remove kernel 4.14 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1a24aecd150a17f230080d708f2fbf4de90e251e;p=openwrt%2Fstaging%2Frmilecki.git sunxi: Remove kernel 4.14 support This target was switched to kernel 4.19 more than 6 months ago in commit f342ffd300da ("treewide: kernel: bump some targets to 4.19") and now with kernel 5.4 support being added it gets harder to support kernel 4.14 in addition to kernel 4.19 and 5.4. Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/sunxi/config-4.14 b/target/linux/sunxi/config-4.14 deleted file mode 100644 index 6e19f1599b9..00000000000 --- a/target/linux/sunxi/config-4.14 +++ /dev/null @@ -1,601 +0,0 @@ -# CONFIG_AHCI_SUNXI is not set -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_ARCH_AXXIA is not set -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=416 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_PHYS_ADDR_T_64BIT=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUNXI=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARM=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARM_ERRATA_643719=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_LPAE=y -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_PMU=y -CONFIG_ARM_PSCI=y -CONFIG_ARM_PSCI_FW=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_ATA=y -CONFIG_ATAGS=y -# CONFIG_ATA_SFF is not set -CONFIG_AUTO_ZRELADDR=y -CONFIG_AXP20X_POWER=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_PWM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BOUNCE=y -CONFIG_CACHE_L2X0=y -CONFIG_CAN=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_CONFIGFS_FS=y -CONFIG_CONNECTOR=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_COREDUMP=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_CRC32=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_SUN4I_SS=y -CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_UART_8250 is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_SUN4I=y -CONFIG_DMA_SUN6I=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DNOTIFY=y -CONFIG_DTC=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_DWMAC_DWC_QOS_ETH is not set -CONFIG_DWMAC_GENERIC=y -# CONFIG_DWMAC_SUN8I is not set -CONFIG_DWMAC_SUNXI=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_ELF_CORE=y -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -CONFIG_EXT4_FS=y -CONFIG_EXTCON=y -# CONFIG_F2FS_CHECK_FS is not set -CONFIG_F2FS_FS=y -# CONFIG_F2FS_FS_SECURITY is not set -CONFIG_F2FS_FS_XATTR=y -CONFIG_F2FS_STAT_FS=y -CONFIG_FAT_FS=y -CONFIG_FB=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_CMDLINE=y -CONFIG_FB_FOREIGN_ENDIAN=y -CONFIG_FB_LITTLE_ENDIAN=y -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set -CONFIG_FB_SIMPLE=y -CONFIG_FB_TILEBLITTING=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x16=y -CONFIG_FONT_8x8=y -CONFIG_FONT_SUPPORT=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FRAME_WARN=2048 -CONFIG_FREEZER=y -CONFIG_FS_MBCACHE=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GLOB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_AXP209=y -CONFIG_GPIO_SYSFS=y -# CONFIG_GRO_CELLS is not set -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -CONFIG_HAVE_ARM_SMCCC=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_EBPF_JIT=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_GUP=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y -CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y -CONFIG_HAVE_KVM_EVENTFD=y -CONFIG_HAVE_KVM_IRQCHIP=y -CONFIG_HAVE_KVM_IRQFD=y -CONFIG_HAVE_KVM_IRQ_ROUTING=y -CONFIG_HAVE_KVM_MSI=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_RCU_TABLE_FREE=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_HOTPLUG_CPU=y -# CONFIG_HUGETLBFS is not set -CONFIG_HWMON=y -CONFIG_HW_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_TIMERIOMEM=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_MV64XXX=y -CONFIG_I2C_SUN6I_P2WI=y -CONFIG_IIO=y -# CONFIG_IIO_BUFFER is not set -# CONFIG_IIO_TRIGGER is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -CONFIG_INPUT_AXP20X_PEK=y -CONFIG_INPUT_KEYBOARD=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_IOMMU_HELPER=y -CONFIG_IOSCHED_CFQ=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -CONFIG_KALLSYMS=y -# CONFIG_KERNEL_MODE_NEON is not set -CONFIG_KEYBOARD_SUN4I_LRADC=y -CONFIG_KSM=y -CONFIG_KVM=y -CONFIG_KVM_ARM_HOST=y -CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y -CONFIG_KVM_MMIO=y -CONFIG_KVM_VFIO=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_PLATFORM=y -CONFIG_LEDS_GPIO=y -CONFIG_LIBFDT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_MACH_SUN4I=y -CONFIG_MACH_SUN5I=y -CONFIG_MACH_SUN6I=y -CONFIG_MACH_SUN7I=y -CONFIG_MACH_SUN8I=y -CONFIG_MACH_SUN9I=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_SUN4I=y -CONFIG_MEDIA_SUPPORT=y -# CONFIG_MFD_AC100 is not set -CONFIG_MFD_AXP20X=y -CONFIG_MFD_AXP20X_I2C=y -CONFIG_MFD_AXP20X_RSB=y -CONFIG_MFD_CORE=y -CONFIG_MFD_SUN6I_PRCM=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_SUNXI=y -CONFIG_MMU_NOTIFIER=y -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD=y -CONFIG_MTD_SPLIT_SUPPORT=y -CONFIG_MTD_SPLIT_FIT_FW=y -CONFIG_MTD_OF_PARTS=y -CONFIG_MTD_JEDECPROBE=y -# CONFIG_MTD_IMPA7 is not set -CONFIG_MTD_M25P80=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NET_VENDOR_ALLWINNER=y -CONFIG_NLS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NO_BOOTMEM=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=8 -CONFIG_NVMEM=y -CONFIG_NVMEM_SUNXI_SID=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_PARTITION_ADVANCED is not set -# CONFIG_PCI_DOMAINS_GENERIC is not set -# CONFIG_PCI_SYSCALL is not set -CONFIG_PERF_EVENTS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=3 -CONFIG_PHYLIB=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_PHY_SUN4I_USB=y -CONFIG_PHY_SUN9I_USB=y -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PINCTRL_SUN4I_A10=y -# CONFIG_PINCTRL_SUN50I_A64 is not set -# CONFIG_PINCTRL_SUN50I_A64_R is not set -# CONFIG_PINCTRL_SUN50I_H5 is not set -CONFIG_PINCTRL_SUN5I=y -CONFIG_PINCTRL_SUN6I_A31=y -CONFIG_PINCTRL_SUN6I_A31_R=y -CONFIG_PINCTRL_SUN8I_A23=y -CONFIG_PINCTRL_SUN8I_A23_R=y -CONFIG_PINCTRL_SUN8I_A33=y -CONFIG_PINCTRL_SUN8I_A83T=y -CONFIG_PINCTRL_SUN8I_A83T_R=y -CONFIG_PINCTRL_SUN8I_H3=y -CONFIG_PINCTRL_SUN8I_H3_R=y -CONFIG_PINCTRL_SUN8I_V3S=y -CONFIG_PINCTRL_SUN9I_A80=y -CONFIG_PINCTRL_SUN9I_A80_R=y -CONFIG_PINCTRL_SUNXI=y -# CONFIG_PL310_ERRATA_588369 is not set -# CONFIG_PL310_ERRATA_727915 is not set -# CONFIG_PL310_ERRATA_753970 is not set -# CONFIG_PL310_ERRATA_769419 is not set -CONFIG_PM=y -CONFIG_PM_CLK=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_OPP=y -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_SUPPLY=y -CONFIG_PPS=y -CONFIG_PREEMPT=y -CONFIG_PREEMPT_COUNT=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_NOTIFIERS=y -CONFIG_PREEMPT_RCU=y -CONFIG_PRINTK_TIME=y -CONFIG_PROC_EVENTS=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_PWM=y -CONFIG_PWM_SUN4I=y -CONFIG_PWM_SYSFS=y -CONFIG_RATIONAL=y -# CONFIG_RCU_BOOST is not set -CONFIG_RCU_NEED_SEGCBLIST=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_IRQ=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_AXP20X=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_GPIO=y -CONFIG_RELAY=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RESET_SUNXI=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SATA_PMP=y -# CONFIG_SCHED_INFO is not set -CONFIG_SCSI=y -CONFIG_SDIO_UART=y -CONFIG_SECURITYFS=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -CONFIG_SERIAL_8250_DW=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_NR_UARTS=8 -CONFIG_SERIAL_8250_RUNTIME_UARTS=8 -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SG_POOL=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SND=y -CONFIG_SND_COMPRESS_OFFLOAD=y -CONFIG_SND_JACK=y -CONFIG_SND_JACK_INPUT_DEV=y -CONFIG_SND_PCM=y -CONFIG_SND_SOC=y -CONFIG_SND_SOC_I2C_AND_SPI=y -# CONFIG_SND_SUN4I_I2S is not set -# CONFIG_SND_SUN4I_SPDIF is not set -# CONFIG_SND_SUN8I_CODEC is not set -# CONFIG_SND_SUN8I_CODEC_ANALOG is not set -CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_SUN4I=y -CONFIG_SPI_SUN6I=y -CONFIG_SRCU=y -CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y -CONFIG_SUN4I_A10_CCU=y -# CONFIG_SUN4I_EMAC is not set -CONFIG_SUN4I_TIMER=y -CONFIG_SUN5I_CCU=y -CONFIG_SUN5I_HSTIMER=y -CONFIG_SUN6I_A31_CCU=y -CONFIG_SUN8I_A23_CCU=y -CONFIG_SUN8I_A33_CCU=y -CONFIG_SUN8I_A83T_CCU=y -CONFIG_SUN8I_DE2_CCU=y -CONFIG_SUN8I_H3_CCU=y -CONFIG_SUN8I_R40_CCU=y -CONFIG_SUN8I_R_CCU=y -CONFIG_SUN8I_V3S_CCU=y -CONFIG_SUN9I_A80_CCU=y -CONFIG_SUNXI_CCU=y -CONFIG_SUNXI_RSB=y -CONFIG_SUNXI_SRAM=y -CONFIG_SUNXI_WATCHDOG=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_B53=y -# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set -CONFIG_SWCONFIG_B53_PHY_DRIVER=y -CONFIG_SWCONFIG_B53_PHY_FIXUP=y -# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set -CONFIG_SWIOTLB=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYSFS_SYSCALL=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_SYS_SUPPORTS_HUGETLBFS=y -CONFIG_TASKS_RCU=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TOUCHSCREEN_PROPERTIES=y -CONFIG_TOUCHSCREEN_SUN4I=y -CONFIG_TREE_SRCU=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_COMMON=y -CONFIG_USB_DWC2=y -CONFIG_USB_DWC2_HOST=y -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_GADGET=y -CONFIG_USB_NET_DRIVERS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SUPPORT=y -CONFIG_USERIO=y -CONFIG_USE_OF=y -CONFIG_VDSO=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFAT_FS=y -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_VHOST=y -CONFIG_VHOST_NET=y -CONFIG_VIRTUALIZATION=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 diff --git a/target/linux/sunxi/cortexa53/config-4.14 b/target/linux/sunxi/cortexa53/config-4.14 deleted file mode 100644 index 1ba379ea650..00000000000 --- a/target/linux/sunxi/cortexa53/config-4.14 +++ /dev/null @@ -1,102 +0,0 @@ -CONFIG_64BIT=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y -CONFIG_ARCH_HAS_KCOV=y -CONFIG_ARCH_MMAP_RND_BITS=18 -CONFIG_ARCH_MMAP_RND_BITS_MAX=24 -CONFIG_ARCH_MMAP_RND_BITS_MIN=18 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set -CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y -CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y -CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_FRAME_POINTERS=y -CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y -CONFIG_ARM64=y -# CONFIG_ARM64_16K_PAGES is not set -CONFIG_ARM64_4K_PAGES=y -# CONFIG_ARM64_64K_PAGES is not set -CONFIG_ARM64_CONT_SHIFT=4 -# CONFIG_ARM64_CRYPTO is not set -# CONFIG_ARM64_HW_AFDBM is not set -# CONFIG_ARM64_LSE_ATOMICS is not set -CONFIG_ARM64_PAGE_SHIFT=12 -# CONFIG_ARM64_PAN is not set -# CONFIG_ARM64_PMEM is not set -# CONFIG_ARM64_PTDUMP_CORE is not set -# CONFIG_ARM64_PTDUMP_DEBUGFS is not set -# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set -CONFIG_ARM64_SSBD=y -# CONFIG_ARM64_UAO is not set -CONFIG_ARM64_VA_BITS=39 -CONFIG_ARM64_VA_BITS_39=y -# CONFIG_ARM64_VA_BITS_48 is not set -# CONFIG_ARM64_VHE is not set -CONFIG_ARM_AMBA=y -CONFIG_ARM_GIC_V3=y -# CONFIG_ARM_SP805_WATCHDOG is not set -CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y -CONFIG_DWMAC_SUN8I=y -CONFIG_FRAME_POINTER=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_CSUM=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y -CONFIG_HAVE_ARCH_HUGE_VMAP=y -CONFIG_HAVE_ARCH_KASAN=y -CONFIG_HAVE_ARCH_VMAP_STACK=y -CONFIG_HAVE_CMPXCHG_DOUBLE=y -CONFIG_HAVE_CMPXCHG_LOCAL=y -CONFIG_HAVE_DEBUG_BUGVERBOSE=y -CONFIG_HAVE_MEMORY_PRESENT=y -CONFIG_HAVE_PATA_PLATFORM=y -CONFIG_HOLES_IN_ZONE=y -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_KERNEL_MODE_NEON=y -CONFIG_KVM_ARM_PMU=y -CONFIG_MDIO_BUS_MUX=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NO_IOPORT_MAP=y -# CONFIG_NUMA is not set -CONFIG_PARTITION_PERCPU=y -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PINCTRL_SUN4I_A10 is not set -CONFIG_PINCTRL_SUN50I_A64=y -CONFIG_PINCTRL_SUN50I_A64_R=y -CONFIG_PINCTRL_SUN50I_H5=y -# CONFIG_PINCTRL_SUN5I is not set -# CONFIG_PINCTRL_SUN6I_A31 is not set -# CONFIG_PINCTRL_SUN6I_A31_R is not set -# CONFIG_PINCTRL_SUN8I_A23 is not set -# CONFIG_PINCTRL_SUN8I_A23_R is not set -# CONFIG_PINCTRL_SUN8I_A33 is not set -# CONFIG_PINCTRL_SUN8I_A83T is not set -# CONFIG_PINCTRL_SUN8I_A83T_R is not set -# CONFIG_PINCTRL_SUN8I_H3 is not set -# CONFIG_PINCTRL_SUN8I_V3S is not set -# CONFIG_PINCTRL_SUN9I_A80 is not set -# CONFIG_PINCTRL_SUN9I_A80_R is not set -# CONFIG_RANDOMIZE_BASE is not set -CONFIG_REALTEK_PHY=y -# CONFIG_SERIAL_AMBA_PL011 is not set -CONFIG_SOUND_OSS_CORE_PRECLAIM=y -CONFIG_SPARSEMEM=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SUN50I_A64_CCU=y -CONFIG_SUN50I_ERRATUM_UNKNOWN1=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_UNMAP_KERNEL_AT_EL0=y -CONFIG_VMAP_STACK=y diff --git a/target/linux/sunxi/cortexa7/config-4.14 b/target/linux/sunxi/cortexa7/config-4.14 deleted file mode 100644 index f0b6a7a8611..00000000000 --- a/target/linux/sunxi/cortexa7/config-4.14 +++ /dev/null @@ -1,10 +0,0 @@ -CONFIG_DWMAC_SUN8I=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -# CONFIG_MACH_SUN4I is not set -# CONFIG_MACH_SUN5I is not set -# CONFIG_PINCTRL_GR8 is not set -CONFIG_PINCTRL_SUN4I_A10=y -# CONFIG_PINCTRL_SUN5I_A10S is not set -# CONFIG_PINCTRL_SUN5I_A13 is not set -CONFIG_MDIO_BUS_MUX=y -# CONFIG_PINCTRL_SUN5I is not set diff --git a/target/linux/sunxi/cortexa8/config-4.14 b/target/linux/sunxi/cortexa8/config-4.14 deleted file mode 100644 index 6cbb4417f65..00000000000 --- a/target/linux/sunxi/cortexa8/config-4.14 +++ /dev/null @@ -1,21 +0,0 @@ -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -# CONFIG_ARM_ERRATA_643719 is not set -# CONFIG_ARM_LPAE is not set -# CONFIG_MACH_SUN6I is not set -# CONFIG_MACH_SUN7I is not set -# CONFIG_MACH_SUN8I is not set -# CONFIG_MACH_SUN9I is not set -CONFIG_PGTABLE_LEVELS=2 -# CONFIG_PHYS_ADDR_T_64BIT is not set -# CONFIG_PINCTRL_SUN6I_A31 is not set -# CONFIG_PINCTRL_SUN6I_A31_R is not set -# CONFIG_PINCTRL_SUN8I_A23 is not set -# CONFIG_PINCTRL_SUN8I_A23_R is not set -# CONFIG_PINCTRL_SUN8I_A33 is not set -# CONFIG_PINCTRL_SUN8I_A83T is not set -# CONFIG_PINCTRL_SUN8I_A83T_R is not set -# CONFIG_PINCTRL_SUN8I_H3 is not set -# CONFIG_PINCTRL_SUN8I_H3_R is not set -# CONFIG_PINCTRL_SUN8I_V3S is not set -# CONFIG_PINCTRL_SUN9I_A80 is not set -# CONFIG_PINCTRL_SUN9I_A80_R is not set diff --git a/target/linux/sunxi/patches-4.14/001-net-stmmac-snps-dwmac-mdio-MDIOs-are-automatically-r.patch b/target/linux/sunxi/patches-4.14/001-net-stmmac-snps-dwmac-mdio-MDIOs-are-automatically-r.patch deleted file mode 100644 index 838b234717e..00000000000 --- a/target/linux/sunxi/patches-4.14/001-net-stmmac-snps-dwmac-mdio-MDIOs-are-automatically-r.patch +++ /dev/null @@ -1,33 +0,0 @@ -From b5beecb580376cd8d959eb990abece6a748a3ce3 Mon Sep 17 00:00:00 2001 -From: Corentin Labbe -Date: Tue, 24 Oct 2017 19:57:12 +0200 -Subject: [PATCH] net: stmmac: snps, dwmac-mdio MDIOs are automatically - registered - -stmmac bindings docs said that its mdio node must have -compatible = "snps,dwmac-mdio"; -Since dwmac-sun8i does not have any good reasons to not doing it, all -their MDIO node must have it. - -Since these compatible is automatically registered, dwmac-sun8i compatible -does not need to be in need_mdio_ids. - -Signed-off-by: Corentin Labbe -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 4 ---- - 1 file changed, 4 deletions(-) - ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -@@ -317,10 +317,6 @@ static int stmmac_dt_phy(struct plat_stm - bool mdio = true; - static const struct of_device_id need_mdio_ids[] = { - { .compatible = "snps,dwc-qos-ethernet-4.10" }, -- { .compatible = "allwinner,sun8i-a83t-emac" }, -- { .compatible = "allwinner,sun8i-h3-emac" }, -- { .compatible = "allwinner,sun8i-v3s-emac" }, -- { .compatible = "allwinner,sun50i-a64-emac" }, - {}, - }; - diff --git a/target/linux/sunxi/patches-4.14/002-net-stmmac-dwmac-sun8i-Handle-integrated-external-MD.patch b/target/linux/sunxi/patches-4.14/002-net-stmmac-dwmac-sun8i-Handle-integrated-external-MD.patch deleted file mode 100644 index 9f7f89c7e20..00000000000 --- a/target/linux/sunxi/patches-4.14/002-net-stmmac-dwmac-sun8i-Handle-integrated-external-MD.patch +++ /dev/null @@ -1,506 +0,0 @@ -From 634db83b82658f4641d8026e340c6027cf74a6bb Mon Sep 17 00:00:00 2001 -From: Corentin Labbe -Date: Tue, 24 Oct 2017 19:57:13 +0200 -Subject: [PATCH] net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs - -The Allwinner H3 SoC have two distinct MDIO bus, only one could be -active at the same time. -The selection of the active MDIO bus are done via some bits in the EMAC -register of the system controller. - -This patch implement this MDIO switch via a custom MDIO-mux. - -Signed-off-by: Corentin Labbe -Reviewed-by: Andrew Lunn -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/Kconfig | 1 + - drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 353 ++++++++++++++-------- - 2 files changed, 224 insertions(+), 130 deletions(-) - ---- a/drivers/net/ethernet/stmicro/stmmac/Kconfig -+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig -@@ -159,6 +159,7 @@ config DWMAC_SUN8I - tristate "Allwinner sun8i GMAC support" - default ARCH_SUNXI - depends on OF && (ARCH_SUNXI || COMPILE_TEST) -+ select MDIO_BUS_MUX - ---help--- - Support for Allwinner H3 A83T A64 EMAC ethernet controllers. - ---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c -+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c -@@ -17,6 +17,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -41,14 +42,14 @@ - * This value is used for disabling properly EMAC - * and used as a good starting value in case of the - * boot process(uboot) leave some stuff. -- * @internal_phy: Does the MAC embed an internal PHY -+ * @soc_has_internal_phy: Does the MAC embed an internal PHY - * @support_mii: Does the MAC handle MII - * @support_rmii: Does the MAC handle RMII - * @support_rgmii: Does the MAC handle RGMII - */ - struct emac_variant { - u32 default_syscon_value; -- int internal_phy; -+ bool soc_has_internal_phy; - bool support_mii; - bool support_rmii; - bool support_rgmii; -@@ -61,7 +62,8 @@ struct emac_variant { - * @rst_ephy: reference to the optional EPHY reset for the internal PHY - * @variant: reference to the current board variant - * @regmap: regmap for using the syscon -- * @use_internal_phy: Does the current PHY choice imply using the internal PHY -+ * @internal_phy_powered: Does the internal PHY is enabled -+ * @mux_handle: Internal pointer used by mdio-mux lib - */ - struct sunxi_priv_data { - struct clk *tx_clk; -@@ -70,12 +72,13 @@ struct sunxi_priv_data { - struct reset_control *rst_ephy; - const struct emac_variant *variant; - struct regmap *regmap; -- bool use_internal_phy; -+ bool internal_phy_powered; -+ void *mux_handle; - }; - - static const struct emac_variant emac_variant_h3 = { - .default_syscon_value = 0x58000, -- .internal_phy = PHY_INTERFACE_MODE_MII, -+ .soc_has_internal_phy = true, - .support_mii = true, - .support_rmii = true, - .support_rgmii = true -@@ -83,20 +86,20 @@ static const struct emac_variant emac_va - - static const struct emac_variant emac_variant_v3s = { - .default_syscon_value = 0x38000, -- .internal_phy = PHY_INTERFACE_MODE_MII, -+ .soc_has_internal_phy = true, - .support_mii = true - }; - - static const struct emac_variant emac_variant_a83t = { - .default_syscon_value = 0, -- .internal_phy = 0, -+ .soc_has_internal_phy = false, - .support_mii = true, - .support_rgmii = true - }; - - static const struct emac_variant emac_variant_a64 = { - .default_syscon_value = 0, -- .internal_phy = 0, -+ .soc_has_internal_phy = false, - .support_mii = true, - .support_rmii = true, - .support_rgmii = true -@@ -195,6 +198,9 @@ static const struct emac_variant emac_va - #define H3_EPHY_LED_POL BIT(17) /* 1: active low, 0: active high */ - #define H3_EPHY_SHUTDOWN BIT(16) /* 1: shutdown, 0: power up */ - #define H3_EPHY_SELECT BIT(15) /* 1: internal PHY, 0: external PHY */ -+#define H3_EPHY_MUX_MASK (H3_EPHY_SHUTDOWN | H3_EPHY_SELECT) -+#define DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID 1 -+#define DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID 2 - - /* H3/A64 specific bits */ - #define SYSCON_RMII_EN BIT(13) /* 1: enable RMII (overrides EPIT) */ -@@ -635,6 +641,159 @@ static int sun8i_dwmac_reset(struct stmm - return 0; - } - -+/* Search in mdio-mux node for internal PHY node and get its clk/reset */ -+static int get_ephy_nodes(struct stmmac_priv *priv) -+{ -+ struct sunxi_priv_data *gmac = priv->plat->bsp_priv; -+ struct device_node *mdio_mux, *iphynode; -+ struct device_node *mdio_internal; -+ int ret; -+ -+ mdio_mux = of_get_child_by_name(priv->device->of_node, "mdio-mux"); -+ if (!mdio_mux) { -+ dev_err(priv->device, "Cannot get mdio-mux node\n"); -+ return -ENODEV; -+ } -+ -+ mdio_internal = of_find_compatible_node(mdio_mux, NULL, -+ "allwinner,sun8i-h3-mdio-internal"); -+ if (!mdio_internal) { -+ dev_err(priv->device, "Cannot get internal_mdio node\n"); -+ return -ENODEV; -+ } -+ -+ /* Seek for internal PHY */ -+ for_each_child_of_node(mdio_internal, iphynode) { -+ gmac->ephy_clk = of_clk_get(iphynode, 0); -+ if (IS_ERR(gmac->ephy_clk)) -+ continue; -+ gmac->rst_ephy = of_reset_control_get_exclusive(iphynode, NULL); -+ if (IS_ERR(gmac->rst_ephy)) { -+ ret = PTR_ERR(gmac->rst_ephy); -+ if (ret == -EPROBE_DEFER) -+ return ret; -+ continue; -+ } -+ dev_info(priv->device, "Found internal PHY node\n"); -+ return 0; -+ } -+ return -ENODEV; -+} -+ -+static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv) -+{ -+ struct sunxi_priv_data *gmac = priv->plat->bsp_priv; -+ int ret; -+ -+ if (gmac->internal_phy_powered) { -+ dev_warn(priv->device, "Internal PHY already powered\n"); -+ return 0; -+ } -+ -+ dev_info(priv->device, "Powering internal PHY\n"); -+ ret = clk_prepare_enable(gmac->ephy_clk); -+ if (ret) { -+ dev_err(priv->device, "Cannot enable internal PHY\n"); -+ return ret; -+ } -+ -+ /* Make sure the EPHY is properly reseted, as U-Boot may leave -+ * it at deasserted state, and thus it may fail to reset EMAC. -+ */ -+ reset_control_assert(gmac->rst_ephy); -+ -+ ret = reset_control_deassert(gmac->rst_ephy); -+ if (ret) { -+ dev_err(priv->device, "Cannot deassert internal phy\n"); -+ clk_disable_unprepare(gmac->ephy_clk); -+ return ret; -+ } -+ -+ gmac->internal_phy_powered = true; -+ -+ return 0; -+} -+ -+static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac) -+{ -+ if (!gmac->internal_phy_powered) -+ return 0; -+ -+ clk_disable_unprepare(gmac->ephy_clk); -+ reset_control_assert(gmac->rst_ephy); -+ gmac->internal_phy_powered = false; -+ return 0; -+} -+ -+/* MDIO multiplexing switch function -+ * This function is called by the mdio-mux layer when it thinks the mdio bus -+ * multiplexer needs to switch. -+ * 'current_child' is the current value of the mux register -+ * 'desired_child' is the value of the 'reg' property of the target child MDIO -+ * node. -+ * The first time this function is called, current_child == -1. -+ * If current_child == desired_child, then the mux is already set to the -+ * correct bus. -+ */ -+static int mdio_mux_syscon_switch_fn(int current_child, int desired_child, -+ void *data) -+{ -+ struct stmmac_priv *priv = data; -+ struct sunxi_priv_data *gmac = priv->plat->bsp_priv; -+ u32 reg, val; -+ int ret = 0; -+ bool need_power_ephy = false; -+ -+ if (current_child ^ desired_child) { -+ regmap_read(gmac->regmap, SYSCON_EMAC_REG, ®); -+ switch (desired_child) { -+ case DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID: -+ dev_info(priv->device, "Switch mux to internal PHY"); -+ val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SELECT; -+ -+ need_power_ephy = true; -+ break; -+ case DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID: -+ dev_info(priv->device, "Switch mux to external PHY"); -+ val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SHUTDOWN; -+ need_power_ephy = false; -+ break; -+ default: -+ dev_err(priv->device, "Invalid child ID %x\n", -+ desired_child); -+ return -EINVAL; -+ } -+ regmap_write(gmac->regmap, SYSCON_EMAC_REG, val); -+ if (need_power_ephy) { -+ ret = sun8i_dwmac_power_internal_phy(priv); -+ if (ret) -+ return ret; -+ } else { -+ sun8i_dwmac_unpower_internal_phy(gmac); -+ } -+ /* After changing syscon value, the MAC need reset or it will -+ * use the last value (and so the last PHY set). -+ */ -+ ret = sun8i_dwmac_reset(priv); -+ } -+ return ret; -+} -+ -+static int sun8i_dwmac_register_mdio_mux(struct stmmac_priv *priv) -+{ -+ int ret; -+ struct device_node *mdio_mux; -+ struct sunxi_priv_data *gmac = priv->plat->bsp_priv; -+ -+ mdio_mux = of_get_child_by_name(priv->device->of_node, "mdio-mux"); -+ if (!mdio_mux) -+ return -ENODEV; -+ -+ ret = mdio_mux_init(priv->device, mdio_mux, mdio_mux_syscon_switch_fn, -+ &gmac->mux_handle, priv, priv->mii); -+ return ret; -+} -+ - static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv) - { - struct sunxi_priv_data *gmac = priv->plat->bsp_priv; -@@ -649,35 +808,25 @@ static int sun8i_dwmac_set_syscon(struct - "Current syscon value is not the default %x (expect %x)\n", - val, reg); - -- if (gmac->variant->internal_phy) { -- if (!gmac->use_internal_phy) { -- /* switch to external PHY interface */ -- reg &= ~H3_EPHY_SELECT; -- } else { -- reg |= H3_EPHY_SELECT; -- reg &= ~H3_EPHY_SHUTDOWN; -- dev_dbg(priv->device, "Select internal_phy %x\n", reg); -- -- if (of_property_read_bool(priv->plat->phy_node, -- "allwinner,leds-active-low")) -- reg |= H3_EPHY_LED_POL; -- else -- reg &= ~H3_EPHY_LED_POL; -- -- /* Force EPHY xtal frequency to 24MHz. */ -- reg |= H3_EPHY_CLK_SEL; -- -- ret = of_mdio_parse_addr(priv->device, -- priv->plat->phy_node); -- if (ret < 0) { -- dev_err(priv->device, "Could not parse MDIO addr\n"); -- return ret; -- } -- /* of_mdio_parse_addr returns a valid (0 ~ 31) PHY -- * address. No need to mask it again. -- */ -- reg |= ret << H3_EPHY_ADDR_SHIFT; -+ if (gmac->variant->soc_has_internal_phy) { -+ if (of_property_read_bool(priv->plat->phy_node, -+ "allwinner,leds-active-low")) -+ reg |= H3_EPHY_LED_POL; -+ else -+ reg &= ~H3_EPHY_LED_POL; -+ -+ /* Force EPHY xtal frequency to 24MHz. */ -+ reg |= H3_EPHY_CLK_SEL; -+ -+ ret = of_mdio_parse_addr(priv->device, priv->plat->phy_node); -+ if (ret < 0) { -+ dev_err(priv->device, "Could not parse MDIO addr\n"); -+ return ret; - } -+ /* of_mdio_parse_addr returns a valid (0 ~ 31) PHY -+ * address. No need to mask it again. -+ */ -+ reg |= 1 << H3_EPHY_ADDR_SHIFT; - } - - if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) { -@@ -750,81 +899,21 @@ static void sun8i_dwmac_unset_syscon(str - regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg); - } - --static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv) -+static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv) - { -- struct sunxi_priv_data *gmac = priv->plat->bsp_priv; -- int ret; -- -- if (!gmac->use_internal_phy) -- return 0; -+ struct sunxi_priv_data *gmac = priv; - -- ret = clk_prepare_enable(gmac->ephy_clk); -- if (ret) { -- dev_err(priv->device, "Cannot enable ephy\n"); -- return ret; -+ if (gmac->variant->soc_has_internal_phy) { -+ /* sun8i_dwmac_exit could be called with mdiomux uninit */ -+ if (gmac->mux_handle) -+ mdio_mux_uninit(gmac->mux_handle); -+ if (gmac->internal_phy_powered) -+ sun8i_dwmac_unpower_internal_phy(gmac); - } - -- /* Make sure the EPHY is properly reseted, as U-Boot may leave -- * it at deasserted state, and thus it may fail to reset EMAC. -- */ -- reset_control_assert(gmac->rst_ephy); -- -- ret = reset_control_deassert(gmac->rst_ephy); -- if (ret) { -- dev_err(priv->device, "Cannot deassert ephy\n"); -- clk_disable_unprepare(gmac->ephy_clk); -- return ret; -- } -- -- return 0; --} -- --static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac) --{ -- if (!gmac->use_internal_phy) -- return 0; -- -- clk_disable_unprepare(gmac->ephy_clk); -- reset_control_assert(gmac->rst_ephy); -- return 0; --} -- --/* sun8i_power_phy() - Activate the PHY: -- * In case of error, no need to call sun8i_unpower_phy(), -- * it will be called anyway by sun8i_dwmac_exit() -- */ --static int sun8i_power_phy(struct stmmac_priv *priv) --{ -- int ret; -- -- ret = sun8i_dwmac_power_internal_phy(priv); -- if (ret) -- return ret; -- -- ret = sun8i_dwmac_set_syscon(priv); -- if (ret) -- return ret; -- -- /* After changing syscon value, the MAC need reset or it will use -- * the last value (and so the last PHY set. -- */ -- ret = sun8i_dwmac_reset(priv); -- if (ret) -- return ret; -- return 0; --} -- --static void sun8i_unpower_phy(struct sunxi_priv_data *gmac) --{ - sun8i_dwmac_unset_syscon(gmac); -- sun8i_dwmac_unpower_internal_phy(gmac); --} -- --static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv) --{ -- struct sunxi_priv_data *gmac = priv; - -- sun8i_unpower_phy(gmac); -+ reset_control_put(gmac->rst_ephy); - - clk_disable_unprepare(gmac->tx_clk); - -@@ -853,7 +942,7 @@ static struct mac_device_info *sun8i_dwm - if (!mac) - return NULL; - -- ret = sun8i_power_phy(priv); -+ ret = sun8i_dwmac_set_syscon(priv); - if (ret) - return NULL; - -@@ -895,6 +984,8 @@ static int sun8i_dwmac_probe(struct plat - struct sunxi_priv_data *gmac; - struct device *dev = &pdev->dev; - int ret; -+ struct stmmac_priv *priv; -+ struct net_device *ndev; - - ret = stmmac_get_platform_resources(pdev, &stmmac_res); - if (ret) -@@ -938,29 +1029,6 @@ static int sun8i_dwmac_probe(struct plat - } - - plat_dat->interface = of_get_phy_mode(dev->of_node); -- if (plat_dat->interface == gmac->variant->internal_phy) { -- dev_info(&pdev->dev, "Will use internal PHY\n"); -- gmac->use_internal_phy = true; -- gmac->ephy_clk = of_clk_get(plat_dat->phy_node, 0); -- if (IS_ERR(gmac->ephy_clk)) { -- ret = PTR_ERR(gmac->ephy_clk); -- dev_err(&pdev->dev, "Cannot get EPHY clock: %d\n", ret); -- return -EINVAL; -- } -- -- gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL); -- if (IS_ERR(gmac->rst_ephy)) { -- ret = PTR_ERR(gmac->rst_ephy); -- if (ret == -EPROBE_DEFER) -- return ret; -- dev_err(&pdev->dev, "No EPHY reset control found %d\n", -- ret); -- return -EINVAL; -- } -- } else { -- dev_info(&pdev->dev, "Will use external PHY\n"); -- gmac->use_internal_phy = false; -- } - - /* platform data specifying hardware features and callbacks. - * hardware features were copied from Allwinner drivers. -@@ -979,9 +1047,34 @@ static int sun8i_dwmac_probe(struct plat - - ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); - if (ret) -- sun8i_dwmac_exit(pdev, plat_dat->bsp_priv); -+ goto dwmac_exit; -+ -+ ndev = dev_get_drvdata(&pdev->dev); -+ priv = netdev_priv(ndev); -+ /* The mux must be registered after parent MDIO -+ * so after stmmac_dvr_probe() -+ */ -+ if (gmac->variant->soc_has_internal_phy) { -+ ret = get_ephy_nodes(priv); -+ if (ret) -+ goto dwmac_exit; -+ ret = sun8i_dwmac_register_mdio_mux(priv); -+ if (ret) { -+ dev_err(&pdev->dev, "Failed to register mux\n"); -+ goto dwmac_mux; -+ } -+ } else { -+ ret = sun8i_dwmac_reset(priv); -+ if (ret) -+ goto dwmac_exit; -+ } - - return ret; -+dwmac_mux: -+ sun8i_dwmac_unset_syscon(gmac); -+dwmac_exit: -+ sun8i_dwmac_exit(pdev, plat_dat->bsp_priv); -+return ret; - } - - static const struct of_device_id sun8i_dwmac_match[] = { diff --git a/target/linux/sunxi/patches-4.14/003-net-stmmac-sun8i-Restore-the-compatibles.patch b/target/linux/sunxi/patches-4.14/003-net-stmmac-sun8i-Restore-the-compatibles.patch deleted file mode 100644 index 0e8d808b422..00000000000 --- a/target/linux/sunxi/patches-4.14/003-net-stmmac-sun8i-Restore-the-compatibles.patch +++ /dev/null @@ -1,35 +0,0 @@ -From a8ff8ccb45d37efa64476958fc5e9a8d9716b23b Mon Sep 17 00:00:00 2001 -From: Corentin Labbe -Date: Tue, 24 Oct 2017 19:57:14 +0200 -Subject: [PATCH] net: stmmac: sun8i: Restore the compatibles - -The original dwmac-sun8i DT bindings have some issue on how to handle -integrated PHY and was reverted in last RC of 4.13. -But now we have a solution so we need to get back that was reverted. - -This patch restore compatibles about dwmac-sun8i -This reverts commit ad4540cc5aa3 ("net: stmmac: sun8i: Remove the compatibles") - -Signed-off-by: Corentin Labbe -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c -+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c -@@ -1078,6 +1078,14 @@ return ret; - } - - static const struct of_device_id sun8i_dwmac_match[] = { -+ { .compatible = "allwinner,sun8i-h3-emac", -+ .data = &emac_variant_h3 }, -+ { .compatible = "allwinner,sun8i-v3s-emac", -+ .data = &emac_variant_v3s }, -+ { .compatible = "allwinner,sun8i-a83t-emac", -+ .data = &emac_variant_a83t }, -+ { .compatible = "allwinner,sun50i-a64-emac", -+ .data = &emac_variant_a64 }, - { } - }; - MODULE_DEVICE_TABLE(of, sun8i_dwmac_match); diff --git a/target/linux/sunxi/patches-4.14/004-net-stmmac-dwmac-sun8i-fix-allwinner-leds-active-low.patch b/target/linux/sunxi/patches-4.14/004-net-stmmac-dwmac-sun8i-fix-allwinner-leds-active-low.patch deleted file mode 100644 index 1bd5e16c164..00000000000 --- a/target/linux/sunxi/patches-4.14/004-net-stmmac-dwmac-sun8i-fix-allwinner-leds-active-low.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 1c08ac0c4bd8e9d66c4dde29bc496c3b430dd028 Mon Sep 17 00:00:00 2001 -From: Corentin Labbe -Date: Tue, 28 Nov 2017 17:48:22 +0100 -Subject: net: stmmac: dwmac-sun8i: fix allwinner,leds-active-low handling - -The driver expect "allwinner,leds-active-low" to be in PHY node, but -the binding doc expect it to be in MAC node. - -Since all board DT use it also in MAC node, the driver need to search -allwinner,leds-active-low in MAC node. - -Signed-off-by: Corentin Labbe -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c -+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c -@@ -809,8 +809,7 @@ static int sun8i_dwmac_set_syscon(struct - val, reg); - - if (gmac->variant->soc_has_internal_phy) { -- if (of_property_read_bool(priv->plat->phy_node, -- "allwinner,leds-active-low")) -+ if (of_property_read_bool(node, "allwinner,leds-active-low")) - reg |= H3_EPHY_LED_POL; - else - reg &= ~H3_EPHY_LED_POL; diff --git a/target/linux/sunxi/patches-4.14/020-ARM-dts-sunxi-Restore-EMAC-changes-boards.patch b/target/linux/sunxi/patches-4.14/020-ARM-dts-sunxi-Restore-EMAC-changes-boards.patch deleted file mode 100644 index b89278d5d30..00000000000 --- a/target/linux/sunxi/patches-4.14/020-ARM-dts-sunxi-Restore-EMAC-changes-boards.patch +++ /dev/null @@ -1,292 +0,0 @@ -From 4904337fe34fa7fc529d6f4d9ee8b96fe7db310a Mon Sep 17 00:00:00 2001 -From: Corentin Labbe -Date: Tue, 31 Oct 2017 09:19:12 +0100 -Subject: [PATCH] ARM: dts: sunxi: Restore EMAC changes (boards) - -The original dwmac-sun8i DT bindings have some issue on how to handle -integrated PHY and was reverted in last RC of 4.13. -But now we have a solution so we need to get back that was reverted. - -This patch restore all boards DT about dwmac-sun8i -This reverts partially commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes") - -Signed-off-by: Corentin Labbe -Acked-by: Florian Fainelli -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 9 +++++++ - arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 19 +++++++++++++++ - arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 29 +++++++++++++++++++++++ - arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts | 7 ++++++ - arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 8 +++++++ - arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 8 +++++++ - arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts | 5 ++++ - arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 8 +++++++ - arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 22 +++++++++++++++++ - arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts | 16 +++++++++++++ - 10 files changed, 131 insertions(+) - ---- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts -+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts -@@ -56,6 +56,8 @@ - - aliases { - serial0 = &uart0; -+ /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ -+ ethernet0 = &emac; - ethernet1 = &xr819; - }; - -@@ -102,6 +104,13 @@ - status = "okay"; - }; - -+&emac { -+ phy-handle = <&int_mii_phy>; -+ phy-mode = "mii"; -+ allwinner,leds-active-low; -+ status = "okay"; -+}; -+ - &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; ---- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts -+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts -@@ -52,6 +52,7 @@ - compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; - - aliases { -+ ethernet0 = &emac; - serial0 = &uart0; - serial1 = &uart1; - }; -@@ -114,6 +115,24 @@ - status = "okay"; - }; - -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii"; -+ -+ allwinner,leds-active-low; -+ status = "okay"; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <0>; -+ }; -+}; -+ - &ir { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; ---- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts -+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts -@@ -45,6 +45,16 @@ - / { - model = "FriendlyArm NanoPi M1 Plus"; - compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3"; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; -+ }; - }; - - &ehci1 { -@@ -55,6 +65,25 @@ - status = "okay"; - }; - -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii"; -+ -+ allwinner,leds-active-low; -+ -+ status = "okay"; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <7>; -+ }; -+}; -+ - &ohci1 { - status = "okay"; - }; ---- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts -+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts -@@ -46,3 +46,10 @@ - model = "FriendlyARM NanoPi NEO"; - compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; - }; -+ -+&emac { -+ phy-handle = <&int_mii_phy>; -+ phy-mode = "mii"; -+ allwinner,leds-active-low; -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts -+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts -@@ -54,6 +54,7 @@ - aliases { - serial0 = &uart0; - /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ -+ ethernet0 = &emac; - ethernet1 = &rtl8189; - }; - -@@ -117,6 +118,13 @@ - status = "okay"; - }; - -+&emac { -+ phy-handle = <&int_mii_phy>; -+ phy-mode = "mii"; -+ allwinner,leds-active-low; -+ status = "okay"; -+}; -+ - &ir { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; ---- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts -+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts -@@ -52,6 +52,7 @@ - compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3"; - - aliases { -+ ethernet0 = &emac; - serial0 = &uart0; - }; - -@@ -97,6 +98,13 @@ - status = "okay"; - }; - -+&emac { -+ phy-handle = <&int_mii_phy>; -+ phy-mode = "mii"; -+ allwinner,leds-active-low; -+ status = "okay"; -+}; -+ - &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; ---- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts -+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts -@@ -53,6 +53,11 @@ - }; - }; - -+&emac { -+ /* LEDs changed to active high on the plus */ -+ /delete-property/ allwinner,leds-active-low; -+}; -+ - &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; ---- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts -+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts -@@ -52,6 +52,7 @@ - compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3"; - - aliases { -+ ethernet0 = &emac; - serial0 = &uart0; - }; - -@@ -113,6 +114,13 @@ - status = "okay"; - }; - -+&emac { -+ phy-handle = <&int_mii_phy>; -+ phy-mode = "mii"; -+ allwinner,leds-active-low; -+ status = "okay"; -+}; -+ - &ir { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; ---- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts -+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts -@@ -47,6 +47,10 @@ - model = "Xunlong Orange Pi Plus / Plus 2"; - compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; - -+ aliases { -+ ethernet0 = &emac; -+ }; -+ - reg_gmac_3v3: gmac-3v3 { - compatible = "regulator-fixed"; - regulator-name = "gmac-3v3"; -@@ -74,6 +78,24 @@ - status = "okay"; - }; - -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii"; -+ -+ allwinner,leds-active-low; -+ status = "okay"; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <0>; -+ }; -+}; -+ - &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; ---- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts -+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts -@@ -61,3 +61,19 @@ - gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ - }; - }; -+ -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii"; -+ status = "okay"; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <1>; -+ }; -+}; diff --git a/target/linux/sunxi/patches-4.14/021-arm-dts-sunxi-h3-h5-Restore-EMAC-changes.patch b/target/linux/sunxi/patches-4.14/021-arm-dts-sunxi-h3-h5-Restore-EMAC-changes.patch deleted file mode 100644 index 9e7319b4c88..00000000000 --- a/target/linux/sunxi/patches-4.14/021-arm-dts-sunxi-h3-h5-Restore-EMAC-changes.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 4b236a0fe51259ccde06aed046fe20bfe6e25dce Mon Sep 17 00:00:00 2001 -From: Corentin Labbe -Date: Tue, 31 Oct 2017 09:19:10 +0100 -Subject: [PATCH] arm: dts: sunxi: h3/h5: Restore EMAC changes - -The original dwmac-sun8i DT bindings have some issue on how to handle -integrated PHY and was reverted in last RC of 4.13. -But now we have a solution so we need to get back that was reverted. - -This patch restore sunxi-h3-h5.dtsi -This reverts partially commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes") - -Signed-off-by: Corentin Labbe -Acked-by: Florian Fainelli -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sunxi-h3-h5.dtsi | 26 ++++++++++++++++++++++++++ - 1 file changed, 26 insertions(+) - ---- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi -+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi -@@ -391,6 +391,32 @@ - clocks = <&osc24M>; - }; - -+ emac: ethernet@1c30000 { -+ compatible = "allwinner,sun8i-h3-emac"; -+ syscon = <&syscon>; -+ reg = <0x01c30000 0x10000>; -+ interrupts = ; -+ interrupt-names = "macirq"; -+ resets = <&ccu RST_BUS_EMAC>; -+ reset-names = "stmmaceth"; -+ clocks = <&ccu CLK_BUS_EMAC>; -+ clock-names = "stmmaceth"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ -+ mdio: mdio { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ int_mii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <1>; -+ clocks = <&ccu CLK_BUS_EPHY>; -+ resets = <&ccu RST_BUS_EPHY>; -+ }; -+ }; -+ }; -+ - spi0: spi@01c68000 { - compatible = "allwinner,sun8i-h3-spi"; - reg = <0x01c68000 0x1000>; diff --git a/target/linux/sunxi/patches-4.14/022-ARM-dts-sunxi-h3-h5-represent-the-mdio-switch-used-b.patch b/target/linux/sunxi/patches-4.14/022-ARM-dts-sunxi-h3-h5-represent-the-mdio-switch-used-b.patch deleted file mode 100644 index 2db4f136092..00000000000 --- a/target/linux/sunxi/patches-4.14/022-ARM-dts-sunxi-h3-h5-represent-the-mdio-switch-used-b.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 776245ae02f63ba2b94596b892c597676e190e78 Mon Sep 17 00:00:00 2001 -From: Corentin Labbe -Date: Tue, 31 Oct 2017 09:19:11 +0100 -Subject: [PATCH] ARM: dts: sunxi: h3/h5: represent the mdio switch used by - sun8i-h3-emac - -Since dwmac-sun8i could use either an integrated PHY or an external PHY -(which could be at same MDIO address), we need to represent this selection -by a MDIO switch. - -Signed-off-by: Corentin Labbe -Acked-by: Florian Fainelli -Reviewed-by: Andrew Lunn -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sunxi-h3-h5.dtsi | 31 +++++++++++++++++++++++++++---- - 1 file changed, 27 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi -+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi -@@ -408,11 +408,34 @@ - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; -- int_mii_phy: ethernet-phy@1 { -- compatible = "ethernet-phy-ieee802.3-c22"; -+ compatible = "snps,dwmac-mdio"; -+ }; -+ -+ mdio-mux { -+ compatible = "allwinner,sun8i-h3-mdio-mux"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mdio-parent-bus = <&mdio>; -+ /* Only one MDIO is usable at the time */ -+ internal_mdio: mdio@1 { -+ compatible = "allwinner,sun8i-h3-mdio-internal"; - reg = <1>; -- clocks = <&ccu CLK_BUS_EPHY>; -- resets = <&ccu RST_BUS_EPHY>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ int_mii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <1>; -+ clocks = <&ccu CLK_BUS_EPHY>; -+ resets = <&ccu RST_BUS_EPHY>; -+ }; -+ }; -+ -+ external_mdio: mdio@2 { -+ reg = <2>; -+ #address-cells = <1>; -+ #size-cells = <0>; - }; - }; - }; diff --git a/target/linux/sunxi/patches-4.14/025-arm64-dts-allwinner-A64-Restore-EMAC-changes.patch b/target/linux/sunxi/patches-4.14/025-arm64-dts-allwinner-A64-Restore-EMAC-changes.patch deleted file mode 100644 index 23c3ec27edd..00000000000 --- a/target/linux/sunxi/patches-4.14/025-arm64-dts-allwinner-A64-Restore-EMAC-changes.patch +++ /dev/null @@ -1,184 +0,0 @@ -From 94f442886711c6c4f4383a1c5a6994a788ba05d8 Mon Sep 17 00:00:00 2001 -From: Corentin Labbe -Date: Tue, 31 Oct 2017 09:19:13 +0100 -Subject: [PATCH] arm64: dts: allwinner: A64: Restore EMAC changes - -The original dwmac-sun8i DT bindings have some issue on how to handle -integrated PHY and was reverted in last RC of 4.13. -But now we have a solution so we need to get back that was reverted. - -This patch restore arm64 DT about dwmac-sun8i for A64 -This reverts commit 87e1f5e8bb4b ("arm64: dts: allwinner: Revert EMAC changes") - -Signed-off-by: Corentin Labbe -Acked-by: Florian Fainelli -Signed-off-by: Maxime Ripard ---- - .../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 16 ++++++++++++++++ - .../boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 15 +++++++++++++++ - arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 17 +++++++++++++++++ - .../dts/allwinner/sun50i-a64-sopine-baseboard.dts | 16 ++++++++++++++++ - arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 20 ++++++++++++++++++++ - 5 files changed, 84 insertions(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts -@@ -51,6 +51,7 @@ - compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64"; - - aliases { -+ ethernet0 = &emac; - serial0 = &uart0; - serial1 = &uart1; - }; -@@ -69,6 +70,14 @@ - status = "okay"; - }; - -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&rgmii_pins>; -+ phy-mode = "rgmii"; -+ phy-handle = <&ext_rgmii_phy>; -+ status = "okay"; -+}; -+ - &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; -@@ -79,6 +88,13 @@ - bias-pull-up; - }; - -+&mdio { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <1>; -+ }; -+}; -+ - &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts -@@ -48,3 +48,18 @@ - - /* TODO: Camera, touchscreen, etc. */ - }; -+ -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&rgmii_pins>; -+ phy-mode = "rgmii"; -+ phy-handle = <&ext_rgmii_phy>; -+ status = "okay"; -+}; -+ -+&mdio { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <1>; -+ }; -+}; ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts -@@ -51,6 +51,7 @@ - compatible = "pine64,pine64", "allwinner,sun50i-a64"; - - aliases { -+ ethernet0 = &emac; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; -@@ -71,6 +72,15 @@ - status = "okay"; - }; - -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&rmii_pins>; -+ phy-mode = "rmii"; -+ phy-handle = <&ext_rmii_phy1>; -+ status = "okay"; -+ -+}; -+ - &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; -@@ -81,6 +91,13 @@ - bias-pull-up; - }; - -+&mdio { -+ ext_rmii_phy1: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <1>; -+ }; -+}; -+ - &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts -@@ -53,6 +53,7 @@ - "allwinner,sun50i-a64"; - - aliases { -+ ethernet0 = &emac; - serial0 = &uart0; - }; - -@@ -76,6 +77,21 @@ - status = "okay"; - }; - -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&rgmii_pins>; -+ phy-mode = "rgmii"; -+ phy-handle = <&ext_rgmii_phy>; -+ status = "okay"; -+}; -+ -+&mdio { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <1>; -+ }; -+}; -+ - &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi -@@ -450,6 +450,26 @@ - #size-cells = <0>; - }; - -+ emac: ethernet@1c30000 { -+ compatible = "allwinner,sun50i-a64-emac"; -+ syscon = <&syscon>; -+ reg = <0x01c30000 0x10000>; -+ interrupts = ; -+ interrupt-names = "macirq"; -+ resets = <&ccu RST_BUS_EMAC>; -+ reset-names = "stmmaceth"; -+ clocks = <&ccu CLK_BUS_EMAC>; -+ clock-names = "stmmaceth"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mdio: mdio { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ }; -+ - gic: interrupt-controller@1c81000 { - compatible = "arm,gic-400"; - reg = <0x01c81000 0x1000>, diff --git a/target/linux/sunxi/patches-4.14/026-arm64-dts-allwinner-add-snps-dwmac-mdio-compatible-t.patch b/target/linux/sunxi/patches-4.14/026-arm64-dts-allwinner-add-snps-dwmac-mdio-compatible-t.patch deleted file mode 100644 index ee4731d0dcd..00000000000 --- a/target/linux/sunxi/patches-4.14/026-arm64-dts-allwinner-add-snps-dwmac-mdio-compatible-t.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 16416084e06e1ebff51a9e7721a8cc4ccc186f28 Mon Sep 17 00:00:00 2001 -From: Corentin Labbe -Date: Tue, 31 Oct 2017 09:19:15 +0100 -Subject: [PATCH] arm64: dts: allwinner: add snps,dwmac-mdio compatible to - emac/mdio - -stmmac bindings docs said that its mdio node must have -compatible = "snps,dwmac-mdio"; -Since dwmac-sun8i does not have any good reasons to not doing it, all -their MDIO node must have it. - -Signed-off-by: Corentin Labbe -Acked-by: Florian Fainelli -Signed-off-by: Maxime Ripard ---- - arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi -@@ -465,6 +465,7 @@ - #size-cells = <0>; - - mdio: mdio { -+ compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/target/linux/sunxi/patches-4.14/027-arm64-dts-allwinner-H5-Restore-EMAC-changes.patch b/target/linux/sunxi/patches-4.14/027-arm64-dts-allwinner-H5-Restore-EMAC-changes.patch deleted file mode 100644 index b2c9d75ad77..00000000000 --- a/target/linux/sunxi/patches-4.14/027-arm64-dts-allwinner-H5-Restore-EMAC-changes.patch +++ /dev/null @@ -1,120 +0,0 @@ -From 44a94c7ef989317de81e3e7f84385be2bf1b5fe2 Mon Sep 17 00:00:00 2001 -From: Corentin Labbe -Date: Tue, 31 Oct 2017 09:19:14 +0100 -Subject: [PATCH] arm64: dts: allwinner: H5: Restore EMAC changes - -The original dwmac-sun8i DT bindings have some issue on how to handle -integrated PHY and was reverted in last RC of 4.13. -But now we have a solution so we need to get back that was reverted. - -This patch restore arm64 DT about dwmac-sun8i for H5 -This reverts a part of commit 87e1f5e8bb4b ("arm64: dts: allwinner: Revert EMAC changes") - -Signed-off-by: Corentin Labbe -Acked-by: Florian Fainelli -Signed-off-by: Maxime Ripard ---- - arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts | 17 +++++++++++++++++ - .../arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts | 17 +++++++++++++++++ - .../boot/dts/allwinner/sun50i-h5-orangepi-prime.dts | 17 +++++++++++++++++ - 3 files changed, 51 insertions(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts -@@ -50,6 +50,7 @@ - compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5"; - - aliases { -+ ethernet0 = &emac; - serial0 = &uart0; - }; - -@@ -108,6 +109,22 @@ - status = "okay"; - }; - -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii"; -+ status = "okay"; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@7 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <7>; -+ }; -+}; -+ - &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; ---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts -@@ -59,6 +59,7 @@ - }; - - aliases { -+ ethernet0 = &emac; - serial0 = &uart0; - }; - -@@ -136,6 +137,22 @@ - status = "okay"; - }; - -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii"; -+ status = "okay"; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <1>; -+ }; -+}; -+ - &ir { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; ---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts -@@ -54,6 +54,7 @@ - compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5"; - - aliases { -+ ethernet0 = &emac; - serial0 = &uart0; - }; - -@@ -143,6 +144,22 @@ - status = "okay"; - }; - -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii"; -+ status = "okay"; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <1>; -+ }; -+}; -+ - &ir { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; diff --git a/target/linux/sunxi/patches-4.14/030-arm64-allwinner-a64-add-Ethernet-PHY-regulator-for-s.patch b/target/linux/sunxi/patches-4.14/030-arm64-allwinner-a64-add-Ethernet-PHY-regulator-for-s.patch deleted file mode 100644 index 295fff2e744..00000000000 --- a/target/linux/sunxi/patches-4.14/030-arm64-allwinner-a64-add-Ethernet-PHY-regulator-for-s.patch +++ /dev/null @@ -1,51 +0,0 @@ -From bdfe4cebea11476d278b1b98dd0f7cdac8269d62 Mon Sep 17 00:00:00 2001 -From: Icenowy Zheng -Date: Fri, 10 Nov 2017 17:26:54 +0800 -Subject: [PATCH] arm64: allwinner: a64: add Ethernet PHY regulator for several - boards - -On several A64 boards the Ethernet PHY is powered by the DC1SW regulator -on the AXP803 PMIC. - -Add phy-handle property to these boards' emac node. - -Signed-off-by: Icenowy Zheng -Acked-by: Corentin LABBE -Tested-by: Corentin LABBE -Signed-off-by: Maxime Ripard ---- - arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 1 + - arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 1 + - arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts | 1 + - 3 files changed, 3 insertions(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts -@@ -75,6 +75,7 @@ - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; - phy-handle = <&ext_rgmii_phy>; -+ phy-supply = <®_dc1sw>; - status = "okay"; - }; - ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts -@@ -77,6 +77,7 @@ - pinctrl-0 = <&rmii_pins>; - phy-mode = "rmii"; - phy-handle = <&ext_rmii_phy1>; -+ phy-supply = <®_dc1sw>; - status = "okay"; - - }; ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts -@@ -82,6 +82,7 @@ - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; - phy-handle = <&ext_rgmii_phy>; -+ phy-supply = <®_dc1sw>; - status = "okay"; - }; - diff --git a/target/linux/sunxi/patches-4.14/031-arm64-Implement-arch_counter_get_cntpct-to-read-the-.patch b/target/linux/sunxi/patches-4.14/031-arm64-Implement-arch_counter_get_cntpct-to-read-the-.patch deleted file mode 100644 index 60f0cb6c9b9..00000000000 --- a/target/linux/sunxi/patches-4.14/031-arm64-Implement-arch_counter_get_cntpct-to-read-the-.patch +++ /dev/null @@ -1,118 +0,0 @@ -From f2e600c149fda3453344f89c7e9353fe278ebd32 Mon Sep 17 00:00:00 2001 -From: Christoffer Dall -Date: Wed, 18 Oct 2017 13:06:25 +0200 -Subject: [PATCH] arm64: Implement arch_counter_get_cntpct to read the physical - counter - -As we are about to use the physical counter on arm64 systems that have -KVM support, implement arch_counter_get_cntpct() and the associated -errata workaround functionality for stable timer reads. - -Cc: Will Deacon -Cc: Mark Rutland -Acked-by: Catalin Marinas -Acked-by: Marc Zyngier -Signed-off-by: Christoffer Dall ---- - arch/arm64/include/asm/arch_timer.h | 8 +++----- - drivers/clocksource/arm_arch_timer.c | 23 +++++++++++++++++++++++ - 2 files changed, 26 insertions(+), 5 deletions(-) - ---- a/arch/arm64/include/asm/arch_timer.h -+++ b/arch/arm64/include/asm/arch_timer.h -@@ -52,6 +52,7 @@ struct arch_timer_erratum_workaround { - const char *desc; - u32 (*read_cntp_tval_el0)(void); - u32 (*read_cntv_tval_el0)(void); -+ u64 (*read_cntpct_el0)(void); - u64 (*read_cntvct_el0)(void); - int (*set_next_event_phys)(unsigned long, struct clock_event_device *); - int (*set_next_event_virt)(unsigned long, struct clock_event_device *); -@@ -148,11 +149,8 @@ static inline void arch_timer_set_cntkct - - static inline u64 arch_counter_get_cntpct(void) - { -- /* -- * AArch64 kernel and user space mandate the use of CNTVCT. -- */ -- BUG(); -- return 0; -+ isb(); -+ return arch_timer_reg_read_stable(cntpct_el0); - } - - static inline u64 arch_counter_get_cntvct(void) ---- a/drivers/clocksource/arm_arch_timer.c -+++ b/drivers/clocksource/arm_arch_timer.c -@@ -217,6 +217,11 @@ static u32 notrace fsl_a008585_read_cntv - return __fsl_a008585_read_reg(cntv_tval_el0); - } - -+static u64 notrace fsl_a008585_read_cntpct_el0(void) -+{ -+ return __fsl_a008585_read_reg(cntpct_el0); -+} -+ - static u64 notrace fsl_a008585_read_cntvct_el0(void) - { - return __fsl_a008585_read_reg(cntvct_el0); -@@ -258,6 +263,11 @@ static u32 notrace hisi_161010101_read_c - return __hisi_161010101_read_reg(cntv_tval_el0); - } - -+static u64 notrace hisi_161010101_read_cntpct_el0(void) -+{ -+ return __hisi_161010101_read_reg(cntpct_el0); -+} -+ - static u64 notrace hisi_161010101_read_cntvct_el0(void) - { - return __hisi_161010101_read_reg(cntvct_el0); -@@ -288,6 +298,15 @@ static struct ate_acpi_oem_info hisi_161 - #endif - - #ifdef CONFIG_ARM64_ERRATUM_858921 -+static u64 notrace arm64_858921_read_cntpct_el0(void) -+{ -+ u64 old, new; -+ -+ old = read_sysreg(cntpct_el0); -+ new = read_sysreg(cntpct_el0); -+ return (((old ^ new) >> 32) & 1) ? old : new; -+} -+ - static u64 notrace arm64_858921_read_cntvct_el0(void) - { - u64 old, new; -@@ -346,6 +365,7 @@ static const struct arch_timer_erratum_w - .desc = "Freescale erratum a005858", - .read_cntp_tval_el0 = fsl_a008585_read_cntp_tval_el0, - .read_cntv_tval_el0 = fsl_a008585_read_cntv_tval_el0, -+ .read_cntpct_el0 = fsl_a008585_read_cntpct_el0, - .read_cntvct_el0 = fsl_a008585_read_cntvct_el0, - .set_next_event_phys = erratum_set_next_event_tval_phys, - .set_next_event_virt = erratum_set_next_event_tval_virt, -@@ -358,6 +378,7 @@ static const struct arch_timer_erratum_w - .desc = "HiSilicon erratum 161010101", - .read_cntp_tval_el0 = hisi_161010101_read_cntp_tval_el0, - .read_cntv_tval_el0 = hisi_161010101_read_cntv_tval_el0, -+ .read_cntpct_el0 = hisi_161010101_read_cntpct_el0, - .read_cntvct_el0 = hisi_161010101_read_cntvct_el0, - .set_next_event_phys = erratum_set_next_event_tval_phys, - .set_next_event_virt = erratum_set_next_event_tval_virt, -@@ -368,6 +389,7 @@ static const struct arch_timer_erratum_w - .desc = "HiSilicon erratum 161010101", - .read_cntp_tval_el0 = hisi_161010101_read_cntp_tval_el0, - .read_cntv_tval_el0 = hisi_161010101_read_cntv_tval_el0, -+ .read_cntpct_el0 = hisi_161010101_read_cntpct_el0, - .read_cntvct_el0 = hisi_161010101_read_cntvct_el0, - .set_next_event_phys = erratum_set_next_event_tval_phys, - .set_next_event_virt = erratum_set_next_event_tval_virt, -@@ -378,6 +400,7 @@ static const struct arch_timer_erratum_w - .match_type = ate_match_local_cap_id, - .id = (void *)ARM64_WORKAROUND_858921, - .desc = "ARM erratum 858921", -+ .read_cntpct_el0 = arm64_858921_read_cntpct_el0, - .read_cntvct_el0 = arm64_858921_read_cntvct_el0, - }, - #endif diff --git a/target/linux/sunxi/patches-4.14/040-arm64-dts-allwinner-a64-Add-watchdog.patch b/target/linux/sunxi/patches-4.14/040-arm64-dts-allwinner-a64-Add-watchdog.patch deleted file mode 100644 index 90c72f95083..00000000000 --- a/target/linux/sunxi/patches-4.14/040-arm64-dts-allwinner-a64-Add-watchdog.patch +++ /dev/null @@ -1,47 +0,0 @@ -From d41850437c364ef7aba9bc25c1c701699d0240e0 Mon Sep 17 00:00:00 2001 -From: Harald Geyer -Date: Thu, 15 Mar 2018 16:25:07 +0000 -Subject: [PATCH] arm64: dts: allwinner: a64: Add watchdog - -Add a watchdog node for the A64, automatically enabled on all boards. -Since the device is compatible with an existing driver, we only reserve -a new compatible string to be used together with the fall back. -Tested on Olimex Teres-I. - -Signed-off-by: Harald Geyer -Signed-off-by: Maxime Ripard ---- - Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt | 6 ++++-- - arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 7 +++++++ - 2 files changed, 11 insertions(+), 2 deletions(-) - ---- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt -+++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt -@@ -2,8 +2,10 @@ Allwinner SoCs Watchdog timer - - Required properties: - --- compatible : should be either "allwinner,sun4i-a10-wdt" or -- "allwinner,sun6i-a31-wdt" -+- compatible : should be one of -+ "allwinner,sun4i-a10-wdt" -+ "allwinner,sun6i-a31-wdt" -+ "allwinner,sun50i-a64-wdt","allwinner,sun6i-a31-wdt" - - reg : Specifies base physical address and size of the registers. - - Example: ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi -@@ -538,5 +538,12 @@ - #address-cells = <1>; - #size-cells = <0>; - }; -+ -+ wdt0: watchdog@1c20ca0 { -+ compatible = "allwinner,sun50i-a64-wdt", -+ "allwinner,sun6i-a31-wdt"; -+ reg = <0x01c20ca0 0x20>; -+ interrupts = ; -+ }; - }; - }; diff --git a/target/linux/sunxi/patches-4.14/060-ARM-dts-sun8i-add-support-for-Orange-Pi-R1.patch b/target/linux/sunxi/patches-4.14/060-ARM-dts-sun8i-add-support-for-Orange-Pi-R1.patch deleted file mode 100644 index e9d448792c7..00000000000 --- a/target/linux/sunxi/patches-4.14/060-ARM-dts-sun8i-add-support-for-Orange-Pi-R1.patch +++ /dev/null @@ -1,105 +0,0 @@ -From 74942cd5dfe4ac4fd982fe58118bc69346a2bd18 Mon Sep 17 00:00:00 2001 -From: Icenowy Zheng -Date: Sun, 12 Nov 2017 20:41:29 +0800 -Subject: [PATCH] ARM: dts: sun8i: add support for Orange Pi R1 - -Orange Pi R1 is a board design based on Orange Pi Zero, with XR819 Wi-Fi -chip replaced by RTL8189ETV Wi-Fi module and the USB Type-A jack -replaced by an onboard USB RTL8152B USB-Ethernet adapter. - -Add support for it. - -Signed-off-by: Icenowy Zheng -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts | 73 +++++++++++++++++++++++++ - 2 files changed, 74 insertions(+) - create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -916,6 +916,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ - sun8i-a83t-allwinner-h8homlet-v2.dtb \ - sun8i-a83t-bananapi-m3.dtb \ - sun8i-a83t-cubietruck-plus.dtb \ -+ sun8i-h2-plus-orangepi-r1.dtb \ - sun8i-h2-plus-orangepi-zero.dtb \ - sun8i-h3-bananapi-m2-plus.dtb \ - sun8i-h3-beelink-x2.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts -@@ -0,0 +1,73 @@ -+/* -+ * Copyright (C) 2017 Icenowy Zheng -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/* Orange Pi R1 is based on Orange Pi Zero design */ -+#include "sun8i-h2-plus-orangepi-zero.dts" -+ -+/ { -+ model = "Xunlong Orange Pi R1"; -+ compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus"; -+ -+ /delete-node/ reg_vcc_wifi; -+ -+ aliases { -+ ethernet1 = &rtl8189etv; -+ }; -+}; -+ -+&ohci1 { -+ /* -+ * RTL8152B USB-Ethernet adapter is connected to USB1, -+ * and it's a USB 2.0 device. So the OHCI1 controller -+ * can be left disabled. -+ */ -+ status = "disabled"; -+}; -+ -+&mmc1 { -+ vmmc-supply = <®_vcc3v3>; -+ vqmmc-supply = <®_vcc3v3>; -+ -+ rtl8189etv: sdio_wifi@1 { -+ reg = <1>; -+ }; -+}; diff --git a/target/linux/sunxi/patches-4.14/061-arm-dts-sun50i-support-for-nanopi-neo-plus2-board.patch b/target/linux/sunxi/patches-4.14/061-arm-dts-sun50i-support-for-nanopi-neo-plus2-board.patch deleted file mode 100644 index 9c0e64a9023..00000000000 --- a/target/linux/sunxi/patches-4.14/061-arm-dts-sun50i-support-for-nanopi-neo-plus2-board.patch +++ /dev/null @@ -1,242 +0,0 @@ -From 54cc3330c2334a0cea8cafc105a29c5d67f9fd32 Mon Sep 17 00:00:00 2001 -From: Antony Antony -Date: Fri, 2 Mar 2018 10:50:48 +0100 -Subject: [PATCH] arm64: allwinner: h5: add NanoPi NEO Plus2 DT support - -Add initial DT for NanoPi NEO Plus2 by FriendlyARM -- Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU -- 1 GB DDR3 RAM -- 8GB eMMC flash (Samsung KLM8G1WEPD-B031) -- micro SD card slot -- Gigabit Ethernet (external RTL8211E-VB-CG chip) -- 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module) -- 2x USB 2.0 host ports & 2x USB via headers - -Kernel 4.15 commit d7341305863b -Kernel 4.16 commit 27d7f9297027 - -Signed-off-by: Antony Antony - ---- a/arch/arm64/boot/dts/allwinner/Makefile -+++ b/arch/arm64/boot/dts/allwinner/Makefile -@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-or - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb -+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb - - always := $(dtb-y) - subdir-y := $(dts-dirs) ---- /dev/null -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts -@@ -0,0 +1,210 @@ -+/* -+ * Copyright (C) 2017 Antony Antony -+ * Copyright (C) 2016 ARM Ltd. -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include "sun50i-h5.dtsi" -+ -+#include -+#include -+#include -+ -+/ { -+ model = "FriendlyARM NanoPi NEO Plus2"; -+ compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5"; -+ -+ aliases { -+ ethernet0 = &emac; -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ pwr { -+ label = "nanopi:green:pwr"; -+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; -+ }; -+ -+ status { -+ label = "nanopi:red:status"; -+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ reg_vcc3v3: vcc3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ vdd_cpux: gpio-regulator { -+ compatible = "regulator-gpio"; -+ pinctrl-names = "default"; -+ regulator-name = "vdd-cpux"; -+ regulator-type = "voltage"; -+ regulator-boot-on; -+ regulator-always-on; -+ regulator-min-microvolt = <1100000>; -+ regulator-max-microvolt = <1300000>; -+ regulator-ramp-delay = <50>; /* 4ms */ -+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; -+ gpios-states = <0x1>; -+ states = <1100000 0x0 -+ 1300000 0x1>; -+ }; -+ -+ wifi_pwrseq: wifi_pwrseq { -+ compatible = "mmc-pwrseq-simple"; -+ pinctrl-names = "default"; -+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ -+ post-power-on-delay-ms = <200>; -+ }; -+}; -+ -+&codec { -+ allwinner,audio-routing = -+ "Line Out", "LINEOUT", -+ "MIC1", "Mic", -+ "Mic", "MBIAS"; -+ status = "okay"; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ehci3 { -+ status = "okay"; -+}; -+ -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii"; -+ status = "okay"; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@7 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <7>; -+ }; -+}; -+ -+&mmc0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ -+ status = "okay"; -+}; -+ -+&mmc1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc1_pins_a>; -+ vmmc-supply = <®_vcc3v3>; -+ vqmmc-supply = <®_vcc3v3>; -+ mmc-pwrseq = <&wifi_pwrseq>; -+ bus-width = <4>; -+ non-removable; -+ status = "okay"; -+ -+ brcmf: wifi@1 { -+ reg = <1>; -+ compatible = "brcm,bcm4329-fmac"; -+ }; -+}; -+ -+&mmc2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc2_8bit_pins>; -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <8>; -+ non-removable; -+ cap-mmc-hw-reset; -+ status = "okay"; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&ohci3 { -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+}; -+ -+&usb_otg { -+ dr_mode = "host"; -+ status = "okay"; -+}; -+ -+&usbphy { -+ /* USB Type-A ports' VBUS is always on */ -+ status = "okay"; -+}; diff --git a/target/linux/sunxi/patches-4.14/080-arm64-allwinner-a64-add-SPI-nodes.patch b/target/linux/sunxi/patches-4.14/080-arm64-allwinner-a64-add-SPI-nodes.patch deleted file mode 100644 index 1e40f99d04e..00000000000 --- a/target/linux/sunxi/patches-4.14/080-arm64-allwinner-a64-add-SPI-nodes.patch +++ /dev/null @@ -1,78 +0,0 @@ -From b518bb159032aac33503fd4cf98706dc84cc1266 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Stefan=20Br=C3=BCns?= -Date: Thu, 31 Aug 2017 01:06:37 +0200 -Subject: [PATCH] arm64: allwinner: a64: add SPI nodes -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The A64 SPI controllers are register compatible to the h3/h5 SPI -controllers. - -The A64 has two SPI controllers, each with a single chip select. -The handles for the DMA channels (23/24 for SPI0/SPI1) are omitted, -as the A64 DMA support is currently missing. - -Signed-off-by: Stefan Brüns -Signed-off-by: Maxime Ripard ---- - arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 41 +++++++++++++++++++ - 1 file changed, 41 insertions(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi -@@ -326,6 +326,16 @@ - drive-strength = <40>; - }; - -+ spi0_pins: spi0 { -+ pins = "PC0", "PC1", "PC2", "PC3"; -+ function = "spi0"; -+ }; -+ -+ spi1_pins: spi1 { -+ pins = "PD0", "PD1", "PD2", "PD3"; -+ function = "spi1"; -+ }; -+ - uart0_pins_a: uart0@0 { - pins = "PB8", "PB9"; - function = "uart0"; -@@ -471,6 +481,37 @@ - }; - }; - -+ -+ spi0: spi@01c68000 { -+ compatible = "allwinner,sun8i-h3-spi"; -+ reg = <0x01c68000 0x1000>; -+ interrupts = ; -+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; -+ clock-names = "ahb", "mod"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins>; -+ resets = <&ccu RST_BUS_SPI0>; -+ status = "disabled"; -+ num-cs = <1>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ spi1: spi@01c69000 { -+ compatible = "allwinner,sun8i-h3-spi"; -+ reg = <0x01c69000 0x1000>; -+ interrupts = ; -+ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; -+ clock-names = "ahb", "mod"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi1_pins>; -+ resets = <&ccu RST_BUS_SPI1>; -+ status = "disabled"; -+ num-cs = <1>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ - gic: interrupt-controller@1c81000 { - compatible = "arm,gic-400"; - reg = <0x01c81000 0x1000>, diff --git a/target/linux/sunxi/patches-4.14/081-arm64-dts-allwinner-sun50i-a64-Add-spi-flash-node-fo.patch b/target/linux/sunxi/patches-4.14/081-arm64-dts-allwinner-sun50i-a64-Add-spi-flash-node-fo.patch deleted file mode 100644 index 3a6e1c3bfa2..00000000000 --- a/target/linux/sunxi/patches-4.14/081-arm64-dts-allwinner-sun50i-a64-Add-spi-flash-node-fo.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 4661c3afefe900ff7b5004aca0a2c927cfa37f3b Mon Sep 17 00:00:00 2001 -From: Emmanuel Vadot -Date: Mon, 21 May 2018 13:54:13 +0200 -Subject: [PATCH] arm64: dts: allwinner: sun50i: a64: Add spi flash node for - sopine - -The Sopine and Pine64-LTS have a winbond w25q128 spi flash on spi0. -Add a node for it. - -Signed-off-by: Emmanuel Vadot -Signed-off-by: Maxime Ripard ---- - arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi -@@ -75,6 +75,18 @@ - }; - }; - -+&spi0 { -+ status = "okay"; -+ -+ flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "jedec,spi-nor"; -+ reg = <0>; -+ spi-max-frequency = <40000000>; -+ }; -+}; -+ - #include "axp803.dtsi" - - ®_aldo2 { diff --git a/target/linux/sunxi/patches-4.14/100-clocksource-drivers-arch_timer-Workaround-for-Allwin.patch b/target/linux/sunxi/patches-4.14/100-clocksource-drivers-arch_timer-Workaround-for-Allwin.patch deleted file mode 100644 index 6da300312fc..00000000000 --- a/target/linux/sunxi/patches-4.14/100-clocksource-drivers-arch_timer-Workaround-for-Allwin.patch +++ /dev/null @@ -1,244 +0,0 @@ -From 7cd6dca3600d8d71328950216688ecd00015d1ce Mon Sep 17 00:00:00 2001 -From: Samuel Holland -Date: Sat, 12 Jan 2019 20:17:18 -0600 -Subject: [PATCH] clocksource/drivers/arch_timer: Workaround for Allwinner A64 - timer instability -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The Allwinner A64 SoC is known[1] to have an unstable architectural -timer, which manifests itself most obviously in the time jumping forward -a multiple of 95 years[2][3]. This coincides with 2^56 cycles at a -timer frequency of 24 MHz, implying that the time went slightly backward -(and this was interpreted by the kernel as it jumping forward and -wrapping around past the epoch). - -Investigation revealed instability in the low bits of CNTVCT at the -point a high bit rolls over. This leads to power-of-two cycle forward -and backward jumps. (Testing shows that forward jumps are about twice as -likely as backward jumps.) Since the counter value returns to normal -after an indeterminate read, each "jump" really consists of both a -forward and backward jump from the software perspective. - -Unless the kernel is trapping CNTVCT reads, a userspace program is able -to read the register in a loop faster than it changes. A test program -running on all 4 CPU cores that reported jumps larger than 100 ms was -run for 13.6 hours and reported the following: - - Count | Event --------+--------------------------- - 9940 | jumped backward 699ms - 268 | jumped backward 1398ms - 1 | jumped backward 2097ms - 16020 | jumped forward 175ms - 6443 | jumped forward 699ms - 2976 | jumped forward 1398ms - 9 | jumped forward 356516ms - 9 | jumped forward 357215ms - 4 | jumped forward 714430ms - 1 | jumped forward 3578440ms - -This works out to a jump larger than 100 ms about every 5.5 seconds on -each CPU core. - -The largest jump (almost an hour!) was the following sequence of reads: - 0x0000007fffffffff → 0x00000093feffffff → 0x0000008000000000 - -Note that the middle bits don't necessarily all read as all zeroes or -all ones during the anomalous behavior; however the low 10 bits checked -by the function in this patch have never been observed with any other -value. - -Also note that smaller jumps are much more common, with backward jumps -of 2048 (2^11) cycles observed over 400 times per second on each core. -(Of course, this is partially explained by lower bits rolling over more -frequently.) Any one of these could have caused the 95 year time skip. - -Similar anomalies were observed while reading CNTPCT (after patching the -kernel to allow reads from userspace). However, the CNTPCT jumps are -much less frequent, and only small jumps were observed. The same program -as before (except now reading CNTPCT) observed after 72 hours: - - Count | Event --------+--------------------------- - 17 | jumped backward 699ms - 52 | jumped forward 175ms - 2831 | jumped forward 699ms - 5 | jumped forward 1398ms - -Further investigation showed that the instability in CNTPCT/CNTVCT also -affected the respective timer's TVAL register. The following values were -observed immediately after writing CNVT_TVAL to 0x10000000: - - CNTVCT | CNTV_TVAL | CNTV_CVAL | CNTV_TVAL Error ---------------------+------------+--------------------+----------------- - 0x000000d4a2d8bfff | 0x10003fff | 0x000000d4b2d8bfff | +0x00004000 - 0x000000d4a2d94000 | 0x0fffffff | 0x000000d4b2d97fff | -0x00004000 - 0x000000d4a2d97fff | 0x10003fff | 0x000000d4b2d97fff | +0x00004000 - 0x000000d4a2d9c000 | 0x0fffffff | 0x000000d4b2d9ffff | -0x00004000 - -The pattern of errors in CNTV_TVAL seemed to depend on exactly which -value was written to it. For example, after writing 0x10101010: - - CNTVCT | CNTV_TVAL | CNTV_CVAL | CNTV_TVAL Error ---------------------+------------+--------------------+----------------- - 0x000001ac3effffff | 0x1110100f | 0x000001ac4f10100f | +0x1000000 - 0x000001ac40000000 | 0x1010100f | 0x000001ac5110100f | -0x1000000 - 0x000001ac58ffffff | 0x1110100f | 0x000001ac6910100f | +0x1000000 - 0x000001ac66000000 | 0x1010100f | 0x000001ac7710100f | -0x1000000 - 0x000001ac6affffff | 0x1110100f | 0x000001ac7b10100f | +0x1000000 - 0x000001ac6e000000 | 0x1010100f | 0x000001ac7f10100f | -0x1000000 - -I was also twice able to reproduce the issue covered by Allwinner's -workaround[4], that writing to TVAL sometimes fails, and both CVAL and -TVAL are left with entirely bogus values. One was the following values: - - CNTVCT | CNTV_TVAL | CNTV_CVAL ---------------------+------------+-------------------------------------- - 0x000000d4a2d6014c | 0x8fbd5721 | 0x000000d132935fff (615s in the past) -Reviewed-by: Marc Zyngier - -======================================================================== - -Because the CPU can read the CNTPCT/CNTVCT registers faster than they -change, performing two reads of the register and comparing the high bits -(like other workarounds) is not a workable solution. And because the -timer can jump both forward and backward, no pair of reads can -distinguish a good value from a bad one. The only way to guarantee a -good value from consecutive reads would be to read _three_ times, and -take the middle value only if the three values are 1) each unique and -2) increasing. This takes at minimum 3 counter cycles (125 ns), or more -if an anomaly is detected. - -However, since there is a distinct pattern to the bad values, we can -optimize the common case (1022/1024 of the time) to a single read by -simply ignoring values that match the error pattern. This still takes no -more than 3 cycles in the worst case, and requires much less code. As an -additional safety check, we still limit the loop iteration to the number -of max-frequency (1.2 GHz) CPU cycles in three 24 MHz counter periods. - -For the TVAL registers, the simple solution is to not use them. Instead, -read or write the CVAL and calculate the TVAL value in software. - -Although the manufacturer is aware of at least part of the erratum[4], -there is no official name for it. For now, use the kernel-internal name -"UNKNOWN1". - -[1]: https://github.com/armbian/build/commit/a08cd6fe7ae9 -[2]: https://forum.armbian.com/topic/3458-a64-datetime-clock-issue/ -[3]: https://irclog.whitequark.org/linux-sunxi/2018-01-26 -[4]: https://github.com/Allwinner-Homlet/H6-BSP4.9-linux/blob/master/drivers/clocksource/arm_arch_timer.c#L272 - -Acked-by: Maxime Ripard -Tested-by: Andre Przywara -Signed-off-by: Samuel Holland -Cc: stable@vger.kernel.org -Signed-off-by: Daniel Lezcano ---- - Documentation/arm64/silicon-errata.txt | 2 + - drivers/clocksource/Kconfig | 10 +++++ - drivers/clocksource/arm_arch_timer.c | 55 ++++++++++++++++++++++++++ - 3 files changed, 67 insertions(+) - ---- a/Documentation/arm64/silicon-errata.txt -+++ b/Documentation/arm64/silicon-errata.txt -@@ -44,6 +44,8 @@ stable kernels. - - | Implementor | Component | Erratum ID | Kconfig | - +----------------+-----------------+-----------------+-----------------------------+ -+| Allwinner | A64/R18 | UNKNOWN1 | SUN50I_ERRATUM_UNKNOWN1 | -+| | | | | - | ARM | Cortex-A53 | #826319 | ARM64_ERRATUM_826319 | - | ARM | Cortex-A53 | #827319 | ARM64_ERRATUM_827319 | - | ARM | Cortex-A53 | #824069 | ARM64_ERRATUM_824069 | ---- a/drivers/clocksource/Kconfig -+++ b/drivers/clocksource/Kconfig -@@ -374,6 +374,16 @@ config ARM64_ERRATUM_858921 - The workaround will be dynamically enabled when an affected - core is detected. - -+config SUN50I_ERRATUM_UNKNOWN1 -+ bool "Workaround for Allwinner A64 erratum UNKNOWN1" -+ default y -+ depends on ARM_ARCH_TIMER && ARM64 && ARCH_SUNXI -+ select ARM_ARCH_TIMER_OOL_WORKAROUND -+ help -+ This option enables a workaround for instability in the timer on -+ the Allwinner A64 SoC. The workaround will only be active if the -+ allwinner,erratum-unknown1 property is found in the timer node. -+ - config ARM_GLOBAL_TIMER - bool "Support for the ARM global timer" if COMPILE_TEST - select TIMER_OF if OF ---- a/drivers/clocksource/arm_arch_timer.c -+++ b/drivers/clocksource/arm_arch_timer.c -@@ -317,6 +317,48 @@ static u64 notrace arm64_858921_read_cnt - } - #endif - -+#ifdef CONFIG_SUN50I_ERRATUM_UNKNOWN1 -+/* -+ * The low bits of the counter registers are indeterminate while bit 10 or -+ * greater is rolling over. Since the counter value can jump both backward -+ * (7ff -> 000 -> 800) and forward (7ff -> fff -> 800), ignore register values -+ * with all ones or all zeros in the low bits. Bound the loop by the maximum -+ * number of CPU cycles in 3 consecutive 24 MHz counter periods. -+ */ -+#define __sun50i_a64_read_reg(reg) ({ \ -+ u64 _val; \ -+ int _retries = 150; \ -+ \ -+ do { \ -+ _val = read_sysreg(reg); \ -+ _retries--; \ -+ } while (((_val + 1) & GENMASK(9, 0)) <= 1 && _retries); \ -+ \ -+ WARN_ON_ONCE(!_retries); \ -+ _val; \ -+}) -+ -+static u64 notrace sun50i_a64_read_cntpct_el0(void) -+{ -+ return __sun50i_a64_read_reg(cntpct_el0); -+} -+ -+static u64 notrace sun50i_a64_read_cntvct_el0(void) -+{ -+ return __sun50i_a64_read_reg(cntvct_el0); -+} -+ -+static u32 notrace sun50i_a64_read_cntp_tval_el0(void) -+{ -+ return read_sysreg(cntp_cval_el0) - sun50i_a64_read_cntpct_el0(); -+} -+ -+static u32 notrace sun50i_a64_read_cntv_tval_el0(void) -+{ -+ return read_sysreg(cntv_cval_el0) - sun50i_a64_read_cntvct_el0(); -+} -+#endif -+ - #ifdef CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND - DEFINE_PER_CPU(const struct arch_timer_erratum_workaround *, - timer_unstable_counter_workaround); -@@ -404,6 +446,19 @@ static const struct arch_timer_erratum_w - .read_cntvct_el0 = arm64_858921_read_cntvct_el0, - }, - #endif -+#ifdef CONFIG_SUN50I_ERRATUM_UNKNOWN1 -+ { -+ .match_type = ate_match_dt, -+ .id = "allwinner,erratum-unknown1", -+ .desc = "Allwinner erratum UNKNOWN1", -+ .read_cntp_tval_el0 = sun50i_a64_read_cntp_tval_el0, -+ .read_cntv_tval_el0 = sun50i_a64_read_cntv_tval_el0, -+ .read_cntpct_el0 = sun50i_a64_read_cntpct_el0, -+ .read_cntvct_el0 = sun50i_a64_read_cntvct_el0, -+ .set_next_event_phys = erratum_set_next_event_tval_phys, -+ .set_next_event_virt = erratum_set_next_event_tval_virt, -+ }, -+#endif - }; - - typedef bool (*ate_match_fn_t)(const struct arch_timer_erratum_workaround *, diff --git a/target/linux/sunxi/patches-4.14/101-arm64-dts-allwinner-a64-Enable-A64-timer-workaround.patch b/target/linux/sunxi/patches-4.14/101-arm64-dts-allwinner-a64-Enable-A64-timer-workaround.patch deleted file mode 100644 index 5bfd33b944a..00000000000 --- a/target/linux/sunxi/patches-4.14/101-arm64-dts-allwinner-a64-Enable-A64-timer-workaround.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 55ec26d6a4241363fa94f15377ebd8f1116fbfd7 Mon Sep 17 00:00:00 2001 -From: Samuel Holland -Date: Sat, 12 Jan 2019 20:17:19 -0600 -Subject: [PATCH] arm64: dts: allwinner: a64: Enable A64 timer workaround - -As instability in the architectural timer has been observed on multiple -devices using this SoC, inluding the Pine64 and the Orange Pi Win, -enable the workaround in the SoC's device tree. - -Acked-by: Maxime Ripard -Signed-off-by: Samuel Holland -Signed-off-by: Chen-Yu Tsai ---- - arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi -@@ -114,6 +114,7 @@ - - timer { - compatible = "arm,armv8-timer"; -+ allwinner,erratum-unknown1; - interrupts = , - -Date: Thu, 28 Dec 2017 21:01:56 +0800 -Subject: [PATCH] ARM: dts: sun8i: fix USB Ethernet of Orange Pi R1 - -Orange Pi R1 uses a Realtek RTL8152B USB Ethernet chip, which is easily -seen on the board but not show in the schematics. A regulator for the -power of the RTL8152B chip is hidden, which uses the same pin with the -Wi-Fi regulator on the original Orange Pi Zero. - -Add this regulator back to the device tree, and bind it to USB1. - -Signed-off-by: Icenowy Zheng ---- - arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) - ---- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts -+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts -@@ -49,6 +49,20 @@ - - /delete-node/ reg_vcc_wifi; - -+ /* -+ * Ths pin of this regulator is the same with the Wi-Fi extra -+ * regulator on the original Zero. However it's used for USB -+ * Ethernet rather than the Wi-Fi now. -+ */ -+ reg_vcc_usb_eth: reg-vcc-usb-ethernet { -+ compatible = "regulator-fixed"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-name = "vcc-usb-ethernet"; -+ enable-active-high; -+ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; -+ }; -+ - aliases { - ethernet1 = &rtl8189etv; - }; -@@ -71,3 +85,7 @@ - reg = <1>; - }; - }; -+ -+&usbphy { -+ usb1_vbus-supply = <®_vcc_usb_eth>; -+}; diff --git a/target/linux/sunxi/patches-4.14/202-ARM-dts-sun8i-activate-SPI-on-Orange-Pi-R1.patch b/target/linux/sunxi/patches-4.14/202-ARM-dts-sun8i-activate-SPI-on-Orange-Pi-R1.patch deleted file mode 100644 index 3f03c1163c3..00000000000 --- a/target/linux/sunxi/patches-4.14/202-ARM-dts-sun8i-activate-SPI-on-Orange-Pi-R1.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 4a36ec1f82db3fa34d766dec5062b4de06b50f7f Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Thu, 28 Dec 2017 14:11:36 +0100 -Subject: [PATCH] ARM: dts: sun8i: activate SPI on Orange Pi R1 - -This board has a SPI flash, activate it also in device tree by default. - -Signed-off-by: Hauke Mehrtens ---- - arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts -+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts -@@ -68,6 +68,14 @@ - }; - }; - -+&spi0 { -+ status = "okay"; -+ -+ flash@0 { -+ compatible = "mxicy,mx25l12805d", "jedec,spi-nor"; -+ }; -+}; -+ - &ohci1 { - /* - * RTL8152B USB-Ethernet adapter is connected to USB1, diff --git a/target/linux/sunxi/patches-4.14/220-ARM-dts-orange-pi-zero-plus.patch b/target/linux/sunxi/patches-4.14/220-ARM-dts-orange-pi-zero-plus.patch deleted file mode 100644 index 2eedb915ddb..00000000000 --- a/target/linux/sunxi/patches-4.14/220-ARM-dts-orange-pi-zero-plus.patch +++ /dev/null @@ -1,185 +0,0 @@ -From 0e2da1a792a21e3933e17727920ed3c35a3ba57a Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 11 Mar 2018 15:13:30 +0100 -Subject: [PATCH] arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus - -The Xunlong Orange Pi Zero Plus is single board computer. -- H5 Quad-core 64-bit Cortex-A53 -- 512MB DDR3 -- microSD slot -- Debug TTL UART -- 1000M/100M/10M Ethernet RJ45 -- Realtek RTL8189FTV -- Spi flash (2MB) -- One USB 2.0 HOST, One USB 2.0 OTG - -This is based on a patch from armbian: -https://github.com/armbian/build/blob/master/patch/kernel/sunxi-next/sunxi-add-orangepi-zero-plus.patch - -Signed-off-by: Hauke Mehrtens ---- - arch/arm64/boot/dts/allwinner/Makefile | 1 + - .../dts/allwinner/sun50i-h5-orangepi-zero-plus.dts | 147 +++++++++++++++++++++ - 2 files changed, 148 insertions(+) - create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts - ---- a/arch/arm64/boot/dts/allwinner/Makefile -+++ b/arch/arm64/boot/dts/allwinner/Makefile -@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-p - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb -+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb ---- /dev/null -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts -@@ -0,0 +1,147 @@ -+/* -+ * Copyright (C) 2016 ARM Ltd. -+ * Copyright (C) 2018 Hauke Mehrtens -+ * -+ * SPDX-License-Identifier: (GPL-2.0+ OR X11) -+ */ -+ -+/dts-v1/; -+#include "sun50i-h5.dtsi" -+ -+#include -+#include -+#include -+ -+/ { -+ model = "Xunlong Orange Pi Zero Plus"; -+ compatible = "xunlong,orangepi-zero-plus", "allwinner,sun50i-h5"; -+ -+ reg_vcc3v3: vcc3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ aliases { -+ ethernet0 = &emac; -+ ethernet1 = &rtl8189ftv; -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ pwr { -+ label = "orangepi:green:pwr"; -+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ -+ default-state = "on"; -+ }; -+ -+ status { -+ label = "orangepi:red:status"; -+ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ -+ }; -+ }; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ -+ }; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ehci1 { -+ status = "okay"; -+}; -+ -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii"; -+ status = "okay"; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <1>; -+ }; -+}; -+ -+&mmc0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ -+ status = "okay"; -+}; -+ -+&mmc1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc1_pins_a>; -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ non-removable; -+ status = "okay"; -+ -+ /* -+ * Explicitly define the sdio device, so that we can add an ethernet -+ * alias for it (which e.g. makes u-boot set a mac-address). -+ */ -+ rtl8189ftv: sdio_wifi@1 { -+ reg = <1>; -+ }; -+}; -+ -+&spi0 { -+ status = "okay"; -+ -+ flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "mxicy,mx25l1606e", "winbond,w25q128"; -+ reg = <0>; -+ spi-max-frequency = <40000000>; -+ }; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&ohci1 { -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+}; -+ -+&usb_otg { -+ dr_mode = "peripheral"; -+ status = "okay"; -+}; -+ -+&usbphy { -+ /* USB Type-A ports' VBUS is always on */ -+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ -+ status = "okay"; -+}; diff --git a/target/linux/sunxi/patches-4.14/301-orangepi_pc2_usb_otg_to_host_key_power.patch b/target/linux/sunxi/patches-4.14/301-orangepi_pc2_usb_otg_to_host_key_power.patch deleted file mode 100644 index d8693374d2e..00000000000 --- a/target/linux/sunxi/patches-4.14/301-orangepi_pc2_usb_otg_to_host_key_power.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts -@@ -87,7 +87,7 @@ - - sw4 { - label = "sw4"; -- linux,code = ; -+ linux,code = ; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - }; - }; -@@ -203,7 +203,7 @@ - }; - - &usb_otg { -- dr_mode = "otg"; -+ dr_mode = "host"; - status = "okay"; - }; - diff --git a/target/linux/sunxi/patches-4.14/310-Revert-ARM-dts-sun7i-Add-BCM53125-switch-nodes-to-th.patch b/target/linux/sunxi/patches-4.14/310-Revert-ARM-dts-sun7i-Add-BCM53125-switch-nodes-to-th.patch deleted file mode 100644 index 3f8a3418a99..00000000000 --- a/target/linux/sunxi/patches-4.14/310-Revert-ARM-dts-sun7i-Add-BCM53125-switch-nodes-to-th.patch +++ /dev/null @@ -1,88 +0,0 @@ -From 49cd9ea6dc8d68eb519ccd9f31c9730dec8a181a Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Thu, 8 Mar 2018 22:14:50 +0100 -Subject: [PATCH] Revert "ARM: dts: sun7i: Add BCM53125 switch nodes to the - lamobo-r1 board" - -This reverts the changes needed for the upstream b53 DSA switch driver -to use the OpenWrt b43 swconfig switch driver. - -This reverts commit 0cdefd5b5485ee6eb3512a75739d09a4090176ed. -This reverts commit d7b9eaff5f0ca00726336b4c0c3c29decf30412a. ---- - arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 60 ++----------------------------- - 1 file changed, 3 insertions(+), 57 deletions(-) - ---- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts -+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts -@@ -109,67 +109,13 @@ - &gmac { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; -+ phy = <&phy1>; - phy-mode = "rgmii"; - phy-supply = <®_gmac_3v3>; - status = "okay"; - -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; -- -- mdio { -- compatible = "snps,dwmac-mdio"; -- #address-cells = <1>; -- #size-cells = <0>; -- -- switch: ethernet-switch@1e { -- compatible = "brcm,bcm53125"; -- reg = <30>; -- #address-cells = <1>; -- #size-cells = <0>; -- -- ports { -- #address-cells = <1>; -- #size-cells = <0>; -- -- port0: port@0 { -- reg = <0>; -- label = "lan2"; -- }; -- -- port1: port@1 { -- reg = <1>; -- label = "lan3"; -- }; -- -- port2: port@2 { -- reg = <2>; -- label = "lan4"; -- }; -- -- port3: port@3 { -- reg = <3>; -- label = "wan"; -- }; -- -- port4: port@4 { -- reg = <4>; -- label = "lan1"; -- }; -- -- port8: port@8 { -- reg = <8>; -- label = "cpu"; -- ethernet = <&gmac>; -- phy-mode = "rgmii-txid"; -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; -- }; -- }; -- }; -+ phy1: ethernet-phy@1 { -+ reg = <1>; - }; - }; - diff --git a/target/linux/sunxi/patches-4.14/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch b/target/linux/sunxi/patches-4.14/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch deleted file mode 100644 index 0d8ec4cec0e..00000000000 --- a/target/linux/sunxi/patches-4.14/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 7d87d3dafc4b1ea5659eb71ee6c5fd5308490d1f Mon Sep 17 00:00:00 2001 -From: Oskari Lemmela -Date: Mon, 31 Dec 2018 07:44:49 +0200 -Subject: [PATCH] arm64: allwinner: a64-sopine: Add Sopine flash partitions. - -First 896kB to u-boot. Enough space for SPL, u-boot and ATF. -Next 128kB to u-boot environment and rest to firmware. - -Firmware partition is compatible FIT image dynamic splitting. - -Signed-off-by: Oskari Lemmela ---- - .../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 22 +++++++++++++++++++ - 1 file changed, 22 insertions(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi -@@ -84,6 +84,28 @@ - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "u-boot"; -+ reg = <0x000000 0x0E0000>; -+ }; -+ -+ partition@e0000 { -+ label = "u-boot-env"; -+ reg = <0x0E0000 0x020000>; -+ }; -+ -+ partition@100000 { -+ compatible = "denx,fit"; -+ label = "firmware"; -+ reg = <0x100000 0xF00000>; -+ }; -+ }; - }; - }; -