From: Christian Marangi Date: Sun, 7 May 2023 03:22:47 +0000 (+0200) Subject: realtek: 5.15: comment unused part of realtek ethernet driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1a0e9bc3b87bf2ebe89f4ed39b3219e975f76200;p=openwrt%2Fstaging%2Fstintel.git realtek: 5.15: comment unused part of realtek ethernet driver Comment unused part of realtek phy driver. Fix compilation warning: drivers/net/phy/rtl83xx-phy.c: In function 'rtl8380_configure_int_rtl8218b': drivers/net/phy/rtl83xx-phy.c:747:21: error: unused variable 'ipd_flag' [-Werror=unused-variable] 747 | int ipd_flag = 1; | ^~~~~~~~ drivers/net/phy/rtl83xx-phy.c: At top level: drivers/net/phy/rtl83xx-phy.c:3333:13: error: 'rtl931x_sds_disable' defined but not used [-Werror=unused-function] 3333 | static void rtl931x_sds_disable(u32 sds) | ^~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Comment unused part of realtek dsa driver. Fix compilation warning: drivers/net/dsa/rtl83xx/common.c: In function 'rtl83xx_fib_event': drivers/net/dsa/rtl83xx/common.c:1430:58: error: unused variable 'fen6_info' [-Werror=unused-variable] 1430 | struct fib6_entry_notifier_info *fen6_info = ptr; | ^~~~~~~~~ drivers/net/dsa/rtl83xx/common.c: At top level: drivers/net/dsa/rtl83xx/common.c:531:12: error: 'rtl83xx_octet_cntr_alloc' defined but not used [-Werror=unused-function] 531 | static int rtl83xx_octet_cntr_alloc(struct rtl838x_switch_priv *priv) | ^~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Drop unused priv in realtek dsa driver. Fix compilation warning: drivers/net/dsa/rtl83xx/dsa.c: In function 'rtl83xx_port_lag_change': drivers/net/dsa/rtl83xx/dsa.c:2016:37: error: unused variable 'priv' [-Werror=unused-variable] 2016 | struct rtl838x_switch_priv *priv = ds->priv; | ^~~~ cc1: all warnings being treated as errors Comment rtl838x_pie_rule_dump in realtek dsa driver for rtl83xx Fix compilation warning: drivers/net/dsa/rtl83xx/rtl838x.c:1294:13: error: 'rtl838x_pie_rule_dump' defined but not used [-Werror=unused-function] 1294 | static void rtl838x_pie_rule_dump(struct pie_rule *pr) | ^~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Comment multiple function in realtek dsa driver for rtl930x Fix compilation warning: drivers/net/dsa/rtl83xx/rtl930x.c:1463:12: error: 'rtl930x_l3_intf_add' defined but not used [-Werror=unused-function] 1463 | static int rtl930x_l3_intf_add(struct rtl838x_switch_priv *priv, struct rtl838x_l3_intf *intf) | ^~~~~~~~~~~~~~~~~~~ drivers/net/dsa/rtl83xx/rtl930x.c:1414:12: error: 'rtl930x_l3_mtu_del' defined but not used [-Werror=unused-function] 1414 | static int rtl930x_l3_mtu_del(struct rtl838x_switch_priv *priv, int mtu) | ^~~~~~~~~~~~~~~~~~ drivers/net/dsa/rtl83xx/rtl930x.c:995:12: error: 'rtl930x_l3_hash6' defined but not used [-Werror=unused-function] 995 | static u32 rtl930x_l3_hash6(struct in6_addr *ip6, int algorithm, bool move_dip) | ^~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors drivers/net/dsa/rtl83xx/rtl930x.c:1690:13: error: 'rtl930x_read_pie_fixed_fields' defined but not used [-Werror=unused-function] 1690 | static void rtl930x_read_pie_fixed_fields(u32 r[], struct pie_rule *pr) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/dsa/rtl83xx/rtl930x.c:1432:12: error: 'rtl930x_l3_mtu_add' defined but not used [-Werror=unused-function] 1432 | static int rtl930x_l3_mtu_add(struct rtl838x_switch_priv *priv, int mtu) | ^~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Comment rtl931x_read_pie_fixed_fields in realtek dsa driver for rtl931x Fix compilation warning: drivers/net/dsa/rtl83xx/rtl931x.c:1116:13: error: 'rtl931x_read_pie_fixed_fields' defined but not used [-Werror=unused-function] 1116 | static void rtl931x_read_pie_fixed_fields(u32 r[], struct pie_rule *pr) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Comment rtl93xx_header_vlan_set in realtek ethernet driver for rtl838x Fix compilation warning: drivers/net/ethernet/rtl838x_eth.c: At top level: drivers/net/ethernet/rtl838x_eth.c:164:13: error: 'rtl93xx_header_vlan_set' defined but not used [-Werror=unused-function] 164 | static void rtl93xx_header_vlan_set(struct p_hdr *h, int vlan) | ^~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Christian Marangi --- diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c index 3216d7eb83..4b928f248b 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c @@ -527,24 +527,25 @@ int rtl83xx_lag_del(struct dsa_switch *ds, int group, int port) return 0; } -/* Allocate a 64 bit octet counter located in the LOG HW table */ -static int rtl83xx_octet_cntr_alloc(struct rtl838x_switch_priv *priv) -{ - int idx; +// Currently Unused +// /* Allocate a 64 bit octet counter located in the LOG HW table */ +// static int rtl83xx_octet_cntr_alloc(struct rtl838x_switch_priv *priv) +// { +// int idx; - mutex_lock(&priv->reg_mutex); +// mutex_lock(&priv->reg_mutex); - idx = find_first_zero_bit(priv->octet_cntr_use_bm, MAX_COUNTERS); - if (idx >= priv->n_counters) { - mutex_unlock(&priv->reg_mutex); - return -1; - } +// idx = find_first_zero_bit(priv->octet_cntr_use_bm, MAX_COUNTERS); +// if (idx >= priv->n_counters) { +// mutex_unlock(&priv->reg_mutex); +// return -1; +// } - set_bit(idx, priv->octet_cntr_use_bm); - mutex_unlock(&priv->reg_mutex); +// set_bit(idx, priv->octet_cntr_use_bm); +// mutex_unlock(&priv->reg_mutex); - return idx; -} +// return idx; +// } /* Allocate a 32-bit packet counter * 2 32-bit packet counters share the location of a 64-bit octet counter @@ -1427,7 +1428,7 @@ static int rtl83xx_fib_event(struct notifier_block *this, unsigned long event, v fib_info_hold(fib_work->fen_info.fi); } else if (info->family == AF_INET6) { - struct fib6_entry_notifier_info *fen6_info = ptr; + //struct fib6_entry_notifier_info *fen6_info = ptr; pr_warn("%s: FIB_RULE ADD/DEL for IPv6 not supported\n", __func__); kfree(fib_work); return NOTIFY_DONE; diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c index 3c67ce5adb..5b5608b9b4 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c @@ -1991,8 +1991,6 @@ static bool rtl83xx_lag_can_offload(struct dsa_switch *ds, static int rtl83xx_port_lag_change(struct dsa_switch *ds, int port) { - struct rtl838x_switch_priv *priv = ds->priv; - pr_debug("%s: %d\n", __func__, port); /* Nothing to be done... */ diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c index 606066aeea..0f9c3c33a4 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c @@ -1300,15 +1300,16 @@ static void rtl838x_pie_rule_dump_raw(u32 r[]) pr_info("Sel : %08x\n", r[17]); } -static void rtl838x_pie_rule_dump(struct pie_rule *pr) -{ - pr_info("Drop: %d, fwd: %d, ovid: %d, ivid: %d, flt: %d, log: %d, rmk: %d, meter: %d tagst: %d, mir: %d, nopri: %d, cpupri: %d, otpid: %d, itpid: %d, shape: %d\n", - pr->drop, pr->fwd_sel, pr->ovid_sel, pr->ivid_sel, pr->flt_sel, pr->log_sel, pr->rmk_sel, pr->log_sel, pr->tagst_sel, pr->mir_sel, pr->nopri_sel, - pr->cpupri_sel, pr->otpid_sel, pr->itpid_sel, pr->shaper_sel); - if (pr->fwd_sel) - pr_info("FWD: %08x\n", pr->fwd_data); - pr_info("TID: %x, %x\n", pr->tid, pr->tid_m); -} +// Currently not used +// static void rtl838x_pie_rule_dump(struct pie_rule *pr) +// { +// pr_info("Drop: %d, fwd: %d, ovid: %d, ivid: %d, flt: %d, log: %d, rmk: %d, meter: %d tagst: %d, mir: %d, nopri: %d, cpupri: %d, otpid: %d, itpid: %d, shape: %d\n", +// pr->drop, pr->fwd_sel, pr->ovid_sel, pr->ivid_sel, pr->flt_sel, pr->log_sel, pr->rmk_sel, pr->log_sel, pr->tagst_sel, pr->mir_sel, pr->nopri_sel, +// pr->cpupri_sel, pr->otpid_sel, pr->itpid_sel, pr->shaper_sel); +// if (pr->fwd_sel) +// pr_info("FWD: %08x\n", pr->fwd_data); +// pr_info("TID: %x, %x\n", pr->tid, pr->tid_m); +// } static int rtl838x_pie_rule_read(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr) { diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c index 5a899f32ba..e65f95e9f1 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c @@ -992,57 +992,58 @@ static u32 rtl930x_l3_hash4(u32 ip, int algorithm, bool move_dip) return hash; } -static u32 rtl930x_l3_hash6(struct in6_addr *ip6, int algorithm, bool move_dip) -{ - u32 rows[16]; - u32 hash; - u32 s0, s1, pH; - - rows[0] = (HASH_PICK(ip6->s6_addr[0], 6, 2) << 0); - rows[1] = (HASH_PICK(ip6->s6_addr[0], 0, 6) << 3) | HASH_PICK(ip6->s6_addr[1], 5, 3); - rows[2] = (HASH_PICK(ip6->s6_addr[1], 0, 5) << 4) | HASH_PICK(ip6->s6_addr[2], 4, 4); - rows[3] = (HASH_PICK(ip6->s6_addr[2], 0, 4) << 5) | HASH_PICK(ip6->s6_addr[3], 3, 5); - rows[4] = (HASH_PICK(ip6->s6_addr[3], 0, 3) << 6) | HASH_PICK(ip6->s6_addr[4], 2, 6); - rows[5] = (HASH_PICK(ip6->s6_addr[4], 0, 2) << 7) | HASH_PICK(ip6->s6_addr[5], 1, 7); - rows[6] = (HASH_PICK(ip6->s6_addr[5], 0, 1) << 8) | HASH_PICK(ip6->s6_addr[6], 0, 8); - rows[7] = (HASH_PICK(ip6->s6_addr[7], 0, 8) << 1) | HASH_PICK(ip6->s6_addr[8], 7, 1); - rows[8] = (HASH_PICK(ip6->s6_addr[8], 0, 7) << 2) | HASH_PICK(ip6->s6_addr[9], 6, 2); - rows[9] = (HASH_PICK(ip6->s6_addr[9], 0, 6) << 3) | HASH_PICK(ip6->s6_addr[10], 5, 3); - rows[10] = (HASH_PICK(ip6->s6_addr[10], 0, 5) << 4) | HASH_PICK(ip6->s6_addr[11], 4, 4); - if (!algorithm) { - rows[11] = (HASH_PICK(ip6->s6_addr[11], 0, 4) << 5) | - (HASH_PICK(ip6->s6_addr[12], 3, 5) << 0); - rows[12] = (HASH_PICK(ip6->s6_addr[12], 0, 3) << 6) | - (HASH_PICK(ip6->s6_addr[13], 2, 6) << 0); - rows[13] = (HASH_PICK(ip6->s6_addr[13], 0, 2) << 7) | - (HASH_PICK(ip6->s6_addr[14], 1, 7) << 0); - if (!move_dip) { - rows[14] = (HASH_PICK(ip6->s6_addr[14], 0, 1) << 8) | - (HASH_PICK(ip6->s6_addr[15], 0, 8) << 0); - } - hash = rows[0] ^ rows[1] ^ rows[2] ^ rows[3] ^ rows[4] ^ - rows[5] ^ rows[6] ^ rows[7] ^ rows[8] ^ rows[9] ^ - rows[10] ^ rows[11] ^ rows[12] ^ rows[13] ^ rows[14]; - } else { - rows[11] = (HASH_PICK(ip6->s6_addr[11], 0, 4) << 5); - rows[12] = (HASH_PICK(ip6->s6_addr[12], 3, 5) << 0); - rows[13] = (HASH_PICK(ip6->s6_addr[12], 0, 3) << 6) | - HASH_PICK(ip6->s6_addr[13], 2, 6); - rows[14] = (HASH_PICK(ip6->s6_addr[13], 0, 2) << 7) | - HASH_PICK(ip6->s6_addr[14], 1, 7); - if (!move_dip) { - rows[15] = (HASH_PICK(ip6->s6_addr[14], 0, 1) << 8) | - (HASH_PICK(ip6->s6_addr[15], 0, 8) << 0); - } - s0 = rows[12] + rows[13] + rows[14]; - s1 = (s0 & 0x1ff) + ((s0 & (0x1ff << 9)) >> 9); - pH = (s1 & 0x1ff) + ((s1 & (0x1ff << 9)) >> 9); - hash = rows[0] ^ rows[1] ^ rows[2] ^ rows[3] ^ rows[4] ^ - rows[5] ^ rows[6] ^ rows[7] ^ rows[8] ^ rows[9] ^ - rows[10] ^ rows[11] ^ pH ^ rows[15]; - } - return hash; -} +// Currently not used +// static u32 rtl930x_l3_hash6(struct in6_addr *ip6, int algorithm, bool move_dip) +// { +// u32 rows[16]; +// u32 hash; +// u32 s0, s1, pH; + +// rows[0] = (HASH_PICK(ip6->s6_addr[0], 6, 2) << 0); +// rows[1] = (HASH_PICK(ip6->s6_addr[0], 0, 6) << 3) | HASH_PICK(ip6->s6_addr[1], 5, 3); +// rows[2] = (HASH_PICK(ip6->s6_addr[1], 0, 5) << 4) | HASH_PICK(ip6->s6_addr[2], 4, 4); +// rows[3] = (HASH_PICK(ip6->s6_addr[2], 0, 4) << 5) | HASH_PICK(ip6->s6_addr[3], 3, 5); +// rows[4] = (HASH_PICK(ip6->s6_addr[3], 0, 3) << 6) | HASH_PICK(ip6->s6_addr[4], 2, 6); +// rows[5] = (HASH_PICK(ip6->s6_addr[4], 0, 2) << 7) | HASH_PICK(ip6->s6_addr[5], 1, 7); +// rows[6] = (HASH_PICK(ip6->s6_addr[5], 0, 1) << 8) | HASH_PICK(ip6->s6_addr[6], 0, 8); +// rows[7] = (HASH_PICK(ip6->s6_addr[7], 0, 8) << 1) | HASH_PICK(ip6->s6_addr[8], 7, 1); +// rows[8] = (HASH_PICK(ip6->s6_addr[8], 0, 7) << 2) | HASH_PICK(ip6->s6_addr[9], 6, 2); +// rows[9] = (HASH_PICK(ip6->s6_addr[9], 0, 6) << 3) | HASH_PICK(ip6->s6_addr[10], 5, 3); +// rows[10] = (HASH_PICK(ip6->s6_addr[10], 0, 5) << 4) | HASH_PICK(ip6->s6_addr[11], 4, 4); +// if (!algorithm) { +// rows[11] = (HASH_PICK(ip6->s6_addr[11], 0, 4) << 5) | +// (HASH_PICK(ip6->s6_addr[12], 3, 5) << 0); +// rows[12] = (HASH_PICK(ip6->s6_addr[12], 0, 3) << 6) | +// (HASH_PICK(ip6->s6_addr[13], 2, 6) << 0); +// rows[13] = (HASH_PICK(ip6->s6_addr[13], 0, 2) << 7) | +// (HASH_PICK(ip6->s6_addr[14], 1, 7) << 0); +// if (!move_dip) { +// rows[14] = (HASH_PICK(ip6->s6_addr[14], 0, 1) << 8) | +// (HASH_PICK(ip6->s6_addr[15], 0, 8) << 0); +// } +// hash = rows[0] ^ rows[1] ^ rows[2] ^ rows[3] ^ rows[4] ^ +// rows[5] ^ rows[6] ^ rows[7] ^ rows[8] ^ rows[9] ^ +// rows[10] ^ rows[11] ^ rows[12] ^ rows[13] ^ rows[14]; +// } else { +// rows[11] = (HASH_PICK(ip6->s6_addr[11], 0, 4) << 5); +// rows[12] = (HASH_PICK(ip6->s6_addr[12], 3, 5) << 0); +// rows[13] = (HASH_PICK(ip6->s6_addr[12], 0, 3) << 6) | +// HASH_PICK(ip6->s6_addr[13], 2, 6); +// rows[14] = (HASH_PICK(ip6->s6_addr[13], 0, 2) << 7) | +// HASH_PICK(ip6->s6_addr[14], 1, 7); +// if (!move_dip) { +// rows[15] = (HASH_PICK(ip6->s6_addr[14], 0, 1) << 8) | +// (HASH_PICK(ip6->s6_addr[15], 0, 8) << 0); +// } +// s0 = rows[12] + rows[13] + rows[14]; +// s1 = (s0 & 0x1ff) + ((s0 & (0x1ff << 9)) >> 9); +// pH = (s1 & 0x1ff) + ((s1 & (0x1ff << 9)) >> 9); +// hash = rows[0] ^ rows[1] ^ rows[2] ^ rows[3] ^ rows[4] ^ +// rows[5] ^ rows[6] ^ rows[7] ^ rows[8] ^ rows[9] ^ +// rows[10] ^ rows[11] ^ pH ^ rows[15]; +// } +// return hash; +// } /* Read a prefix route entry from the L3_PREFIX_ROUTE_IPUC table * We currently only support IPv4 and IPv6 unicast route @@ -1411,85 +1412,89 @@ static void rtl930x_get_l3_nexthop(int idx, u16 *dmac_id, u16 *interface) *interface = v & 0x7f; } -static int rtl930x_l3_mtu_del(struct rtl838x_switch_priv *priv, int mtu) -{ - int i; - - for (i = 0; i < MAX_INTF_MTUS; i++) { - if (mtu == priv->intf_mtus[i]) - break; - } - if (i >= MAX_INTF_MTUS || !priv->intf_mtu_count[i]) { - pr_err("%s: No MTU slot found for MTU: %d\n", __func__, mtu); - return -EINVAL; - } - - priv->intf_mtu_count[i]--; -} - -static int rtl930x_l3_mtu_add(struct rtl838x_switch_priv *priv, int mtu) -{ - int i, free_mtu; - int mtu_id; - - /* Try to find an existing mtu-value or a free slot */ - free_mtu = MAX_INTF_MTUS; - for (i = 0; i < MAX_INTF_MTUS && priv->intf_mtus[i] != mtu; i++) { - if ((!priv->intf_mtu_count[i]) && (free_mtu == MAX_INTF_MTUS)) - free_mtu = i; - } - i = (i < MAX_INTF_MTUS) ? i : free_mtu; - if (i < MAX_INTF_MTUS) { - mtu_id = i; - } else { - pr_err("%s: No free MTU slot available!\n", __func__); - return -EINVAL; - } - - priv->intf_mtus[i] = mtu; - pr_info("Writing MTU %d to slot %d\n", priv->intf_mtus[i], i); - /* Set MTU-value of the slot TODO: distinguish between IPv4/IPv6 routes / slots */ - sw_w32_mask(0xffff << ((i % 2) * 16), priv->intf_mtus[i] << ((i % 2) * 16), - RTL930X_L3_IP_MTU_CTRL(i)); - sw_w32_mask(0xffff << ((i % 2) * 16), priv->intf_mtus[i] << ((i % 2) * 16), - RTL930X_L3_IP6_MTU_CTRL(i)); - - priv->intf_mtu_count[i]++; - - return mtu_id; -} - -/* Creates an interface for a route by setting up the HW tables in the SoC */ -static int rtl930x_l3_intf_add(struct rtl838x_switch_priv *priv, struct rtl838x_l3_intf *intf) -{ - int i, intf_id, mtu_id; - /* number of MTU-values < 16384 */ - - /* Use the same IPv6 mtu as the ip4 mtu for this route if unset */ - intf->ip6_mtu = intf->ip6_mtu ? intf->ip6_mtu : intf->ip4_mtu; - - mtu_id = rtl930x_l3_mtu_add(priv, intf->ip4_mtu); - pr_info("%s: added mtu %d with mtu-id %d\n", __func__, intf->ip4_mtu, mtu_id); - if (mtu_id < 0) - return -ENOSPC; - intf->ip4_mtu_id = mtu_id; - intf->ip6_mtu_id = mtu_id; - - for (i = 0; i < MAX_INTERFACES; i++) { - if (!priv->interfaces[i]) - break; - } - if (i >= MAX_INTERFACES) { - pr_err("%s: cannot find free interface entry\n", __func__); - return -EINVAL; - } - intf_id = i; - priv->interfaces[i] = kzalloc(sizeof(struct rtl838x_l3_intf), GFP_KERNEL); - if (!priv->interfaces[i]) { - pr_err("%s: no memory to allocate new interface\n", __func__); - return -ENOMEM; - } -} +// Currently not used +// static int rtl930x_l3_mtu_del(struct rtl838x_switch_priv *priv, int mtu) +// { +// int i; + +// for (i = 0; i < MAX_INTF_MTUS; i++) { +// if (mtu == priv->intf_mtus[i]) +// break; +// } +// if (i >= MAX_INTF_MTUS || !priv->intf_mtu_count[i]) { +// pr_err("%s: No MTU slot found for MTU: %d\n", __func__, mtu); +// return -EINVAL; +// } + +// priv->intf_mtu_count[i]--; +// } + +// Currently not used +// static int rtl930x_l3_mtu_add(struct rtl838x_switch_priv *priv, int mtu) +// { +// int i, free_mtu; +// int mtu_id; + +// /* Try to find an existing mtu-value or a free slot */ +// free_mtu = MAX_INTF_MTUS; +// for (i = 0; i < MAX_INTF_MTUS && priv->intf_mtus[i] != mtu; i++) { +// if ((!priv->intf_mtu_count[i]) && (free_mtu == MAX_INTF_MTUS)) +// free_mtu = i; +// } +// i = (i < MAX_INTF_MTUS) ? i : free_mtu; +// if (i < MAX_INTF_MTUS) { +// mtu_id = i; +// } else { +// pr_err("%s: No free MTU slot available!\n", __func__); +// return -EINVAL; +// } + +// priv->intf_mtus[i] = mtu; +// pr_info("Writing MTU %d to slot %d\n", priv->intf_mtus[i], i); +// /* Set MTU-value of the slot TODO: distinguish between IPv4/IPv6 routes / slots */ +// sw_w32_mask(0xffff << ((i % 2) * 16), priv->intf_mtus[i] << ((i % 2) * 16), +// RTL930X_L3_IP_MTU_CTRL(i)); +// sw_w32_mask(0xffff << ((i % 2) * 16), priv->intf_mtus[i] << ((i % 2) * 16), +// RTL930X_L3_IP6_MTU_CTRL(i)); + +// priv->intf_mtu_count[i]++; + +// return mtu_id; +// } + + +// Currently not used +// /* Creates an interface for a route by setting up the HW tables in the SoC +// static int rtl930x_l3_intf_add(struct rtl838x_switch_priv *priv, struct rtl838x_l3_intf *intf) +// { +// int i, intf_id, mtu_id; +// /* number of MTU-values < 16384 *\/ + +// /* Use the same IPv6 mtu as the ip4 mtu for this route if unset */ +// intf->ip6_mtu = intf->ip6_mtu ? intf->ip6_mtu : intf->ip4_mtu; + +// mtu_id = rtl930x_l3_mtu_add(priv, intf->ip4_mtu); +// pr_info("%s: added mtu %d with mtu-id %d\n", __func__, intf->ip4_mtu, mtu_id); +// if (mtu_id < 0) +// return -ENOSPC; +// intf->ip4_mtu_id = mtu_id; +// intf->ip6_mtu_id = mtu_id; + +// for (i = 0; i < MAX_INTERFACES; i++) { +// if (!priv->interfaces[i]) +// break; +// } +// if (i >= MAX_INTERFACES) { +// pr_err("%s: cannot find free interface entry\n", __func__); +// return -EINVAL; +// } +// intf_id = i; +// priv->interfaces[i] = kzalloc(sizeof(struct rtl838x_l3_intf), GFP_KERNEL); +// if (!priv->interfaces[i]) { +// pr_err("%s: no memory to allocate new interface\n", __func__); +// return -ENOMEM; +// } +// } /* Set the destination MAC and L3 egress interface ID for a nexthop entry in the SoC's * L3_NEXTHOP table. The nexthop entry is identified by idx. @@ -1683,49 +1688,50 @@ static void rtl930x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ } } -static void rtl930x_read_pie_fixed_fields(u32 r[], struct pie_rule *pr) -{ - pr->stacking_port = r[6] & BIT(31); - pr->spn = (r[6] >> 24) & 0x7f; - pr->mgnt_vlan = r[6] & BIT(23); - if (pr->phase == PHASE_IACL) - pr->dmac_hit_sw = r[6] & BIT(22); - else - pr->content_too_deep = r[6] & BIT(22); - pr->not_first_frag = r[6] & BIT(21); - pr->frame_type_l4 = (r[6] >> 18) & 7; - pr->frame_type = (r[6] >> 16) & 3; - pr->otag_fmt = (r[6] >> 15) & 1; - pr->itag_fmt = (r[6] >> 14) & 1; - pr->otag_exist = (r[6] >> 13) & 1; - pr->itag_exist = (r[6] >> 12) & 1; - pr->frame_type_l2 = (r[6] >> 10) & 3; - pr->igr_normal_port = (r[6] >> 9) & 1; - pr->tid = (r[6] >> 8) & 1; - - pr->stacking_port_m = r[12] & BIT(7); - pr->spn_m = r[12] & 0x7f; - pr->mgnt_vlan_m = r[13] & BIT(31); - if (pr->phase == PHASE_IACL) - pr->dmac_hit_sw_m = r[13] & BIT(30); - else - pr->content_too_deep_m = r[13] & BIT(30); - pr->not_first_frag_m = r[13] & BIT(29); - pr->frame_type_l4_m = (r[13] >> 26) & 7; - pr->frame_type_m = (r[13] >> 24) & 3; - pr->otag_fmt_m = r[13] & BIT(23); - pr->itag_fmt_m = r[13] & BIT(22); - pr->otag_exist_m = r[13] & BIT(21); - pr->itag_exist_m = r[13] & BIT (20); - pr->frame_type_l2_m = (r[13] >> 18) & 3; - pr->igr_normal_port_m = r[13] & BIT(17); - pr->tid_m = (r[13] >> 16) & 1; - - pr->valid = r[13] & BIT(15); - pr->cond_not = r[13] & BIT(14); - pr->cond_and1 = r[13] & BIT(13); - pr->cond_and2 = r[13] & BIT(12); -} +// Currently not used +// static void rtl930x_read_pie_fixed_fields(u32 r[], struct pie_rule *pr) +// { +// pr->stacking_port = r[6] & BIT(31); +// pr->spn = (r[6] >> 24) & 0x7f; +// pr->mgnt_vlan = r[6] & BIT(23); +// if (pr->phase == PHASE_IACL) +// pr->dmac_hit_sw = r[6] & BIT(22); +// else +// pr->content_too_deep = r[6] & BIT(22); +// pr->not_first_frag = r[6] & BIT(21); +// pr->frame_type_l4 = (r[6] >> 18) & 7; +// pr->frame_type = (r[6] >> 16) & 3; +// pr->otag_fmt = (r[6] >> 15) & 1; +// pr->itag_fmt = (r[6] >> 14) & 1; +// pr->otag_exist = (r[6] >> 13) & 1; +// pr->itag_exist = (r[6] >> 12) & 1; +// pr->frame_type_l2 = (r[6] >> 10) & 3; +// pr->igr_normal_port = (r[6] >> 9) & 1; +// pr->tid = (r[6] >> 8) & 1; + +// pr->stacking_port_m = r[12] & BIT(7); +// pr->spn_m = r[12] & 0x7f; +// pr->mgnt_vlan_m = r[13] & BIT(31); +// if (pr->phase == PHASE_IACL) +// pr->dmac_hit_sw_m = r[13] & BIT(30); +// else +// pr->content_too_deep_m = r[13] & BIT(30); +// pr->not_first_frag_m = r[13] & BIT(29); +// pr->frame_type_l4_m = (r[13] >> 26) & 7; +// pr->frame_type_m = (r[13] >> 24) & 3; +// pr->otag_fmt_m = r[13] & BIT(23); +// pr->itag_fmt_m = r[13] & BIT(22); +// pr->otag_exist_m = r[13] & BIT(21); +// pr->itag_exist_m = r[13] & BIT (20); +// pr->frame_type_l2_m = (r[13] >> 18) & 3; +// pr->igr_normal_port_m = r[13] & BIT(17); +// pr->tid_m = (r[13] >> 16) & 1; + +// pr->valid = r[13] & BIT(15); +// pr->cond_not = r[13] & BIT(14); +// pr->cond_and1 = r[13] & BIT(13); +// pr->cond_and2 = r[13] & BIT(12); +// } static void rtl930x_write_pie_fixed_fields(u32 r[], struct pie_rule *pr) { diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c index 92f0662223..5e1b00add5 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c @@ -1113,45 +1113,46 @@ static void rtl931x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ } } -static void rtl931x_read_pie_fixed_fields(u32 r[], struct pie_rule *pr) -{ - pr->mgnt_vlan = r[7] & BIT(31); - if (pr->phase == PHASE_IACL) - pr->dmac_hit_sw = r[7] & BIT(30); - else /* TODO: EACL/VACL phase handling */ - pr->content_too_deep = r[7] & BIT(30); - pr->not_first_frag = r[7] & BIT(29); - pr->frame_type_l4 = (r[7] >> 26) & 7; - pr->frame_type = (r[7] >> 24) & 3; - pr->otag_fmt = (r[7] >> 23) & 1; - pr->itag_fmt = (r[7] >> 22) & 1; - pr->otag_exist = (r[7] >> 21) & 1; - pr->itag_exist = (r[7] >> 20) & 1; - pr->frame_type_l2 = (r[7] >> 18) & 3; - pr->igr_normal_port = (r[7] >> 17) & 1; - pr->tid = (r[7] >> 16) & 1; - - pr->mgnt_vlan_m = r[14] & BIT(15); - if (pr->phase == PHASE_IACL) - pr->dmac_hit_sw_m = r[14] & BIT(14); - else - pr->content_too_deep_m = r[14] & BIT(14); - pr->not_first_frag_m = r[14] & BIT(13); - pr->frame_type_l4_m = (r[14] >> 10) & 7; - pr->frame_type_m = (r[14] >> 8) & 3; - pr->otag_fmt_m = r[14] & BIT(7); - pr->itag_fmt_m = r[14] & BIT(6); - pr->otag_exist_m = r[14] & BIT(5); - pr->itag_exist_m = r[14] & BIT (4); - pr->frame_type_l2_m = (r[14] >> 2) & 3; - pr->igr_normal_port_m = r[14] & BIT(1); - pr->tid_m = r[14] & 1; - - pr->valid = r[15] & BIT(31); - pr->cond_not = r[15] & BIT(30); - pr->cond_and1 = r[15] & BIT(29); - pr->cond_and2 = r[15] & BIT(28); -} +// Currently unused +// static void rtl931x_read_pie_fixed_fields(u32 r[], struct pie_rule *pr) +// { +// pr->mgnt_vlan = r[7] & BIT(31); +// if (pr->phase == PHASE_IACL) +// pr->dmac_hit_sw = r[7] & BIT(30); +// else /* TODO: EACL/VACL phase handling */ +// pr->content_too_deep = r[7] & BIT(30); +// pr->not_first_frag = r[7] & BIT(29); +// pr->frame_type_l4 = (r[7] >> 26) & 7; +// pr->frame_type = (r[7] >> 24) & 3; +// pr->otag_fmt = (r[7] >> 23) & 1; +// pr->itag_fmt = (r[7] >> 22) & 1; +// pr->otag_exist = (r[7] >> 21) & 1; +// pr->itag_exist = (r[7] >> 20) & 1; +// pr->frame_type_l2 = (r[7] >> 18) & 3; +// pr->igr_normal_port = (r[7] >> 17) & 1; +// pr->tid = (r[7] >> 16) & 1; + +// pr->mgnt_vlan_m = r[14] & BIT(15); +// if (pr->phase == PHASE_IACL) +// pr->dmac_hit_sw_m = r[14] & BIT(14); +// else +// pr->content_too_deep_m = r[14] & BIT(14); +// pr->not_first_frag_m = r[14] & BIT(13); +// pr->frame_type_l4_m = (r[14] >> 10) & 7; +// pr->frame_type_m = (r[14] >> 8) & 3; +// pr->otag_fmt_m = r[14] & BIT(7); +// pr->itag_fmt_m = r[14] & BIT(6); +// pr->otag_exist_m = r[14] & BIT(5); +// pr->itag_exist_m = r[14] & BIT (4); +// pr->frame_type_l2_m = (r[14] >> 2) & 3; +// pr->igr_normal_port_m = r[14] & BIT(1); +// pr->tid_m = r[14] & 1; + +// pr->valid = r[15] & BIT(31); +// pr->cond_not = r[15] & BIT(30); +// pr->cond_and1 = r[15] & BIT(29); +// pr->cond_and2 = r[15] & BIT(28); +// } static void rtl931x_write_pie_fixed_fields(u32 r[], struct pie_rule *pr) { diff --git a/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c b/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c index 1b35fae09b..06de0ada2a 100644 --- a/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c +++ b/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c @@ -161,12 +161,13 @@ static void rtl931x_create_tx_header(struct p_hdr *h, unsigned int dest_port, in h->cpu_tag[2] = (BIT(5) | (prio & 0x1f)) << 8; } -static void rtl93xx_header_vlan_set(struct p_hdr *h, int vlan) -{ - h->cpu_tag[2] |= BIT(4); /* Enable VLAN forwarding offload */ - h->cpu_tag[2] |= (vlan >> 8) & 0xf; - h->cpu_tag[3] |= (vlan & 0xff) << 8; -} +// Currently unused +// static void rtl93xx_header_vlan_set(struct p_hdr *h, int vlan) +// { +// h->cpu_tag[2] |= BIT(4); /* Enable VLAN forwarding offload */ +// h->cpu_tag[2] |= (vlan >> 8) & 0xf; +// h->cpu_tag[3] |= (vlan & 0xff) << 8; +// } struct rtl838x_rx_q { int id; diff --git a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c index 7733252763..d47ba3e013 100644 --- a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c +++ b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c @@ -743,9 +743,10 @@ static int rtl8380_configure_int_rtl8218b(struct phy_device *phydev) rtl838x_6275B_intPhy_perport = (void *)h + sizeof(struct fw_header) + h->parts[8].start; rtl8218b_6276B_hwEsd_perport = (void *)h + sizeof(struct fw_header) + h->parts[9].start; - if (sw_r32(RTL838X_DMY_REG31) == 0x1) { - int ipd_flag = 1; - } + // Currently not used + // if (sw_r32(RTL838X_DMY_REG31) == 0x1) { + // int ipd_flag = 1; + // } val = phy_read(phydev, 0); if (val & BIT(11)) @@ -3330,13 +3331,14 @@ static void rtl931x_sds_rx_rst(u32 sds) mdelay(50); } -static void rtl931x_sds_disable(u32 sds) -{ - u32 v = 0x1f; +// Currently not used +// static void rtl931x_sds_disable(u32 sds) +// { +// u32 v = 0x1f; - v |= BIT(7); - sw_w32(v, RTL931X_SERDES_MODE_CTRL + (sds >> 2) * 4); -} +// v |= BIT(7); +// sw_w32(v, RTL931X_SERDES_MODE_CTRL + (sds >> 2) * 4); +// } static void rtl931x_sds_mii_mode_set(u32 sds, phy_interface_t mode) {