From: John Crispin Date: Tue, 6 Aug 2019 04:19:33 +0000 (+0200) Subject: mediatek: update the mt7531 switch driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=19cfbb1b34de5a6f7234c8615edaf3a497ba4d55;p=openwrt%2Fstaging%2Fthess.git mediatek: update the mt7531 switch driver Signed-off-by: John Crispin --- diff --git a/target/linux/mediatek/patches-4.19/0003-mt7531-gsw-internal_phy_calibration.patch b/target/linux/mediatek/patches-4.19/0003-mt7531-gsw-internal_phy_calibration.patch index 6eba4017d7..7ade515a7f 100644 --- a/target/linux/mediatek/patches-4.19/0003-mt7531-gsw-internal_phy_calibration.patch +++ b/target/linux/mediatek/patches-4.19/0003-mt7531-gsw-internal_phy_calibration.patch @@ -10,25 +10,22 @@ --- a/drivers/net/phy/mtk/mt753x/mt7531.c +++ b/drivers/net/phy/mtk/mt753x/mt7531.c -@@ -454,6 +454,21 @@ static void mt7531_core_pll_setup(struct gsw_mt753x *gsw) +@@ -454,6 +454,18 @@ static void mt7531_core_pll_setup(struct gsw_mt753x *gsw) static int mt7531_internal_phy_calibration(struct gsw_mt753x *gsw) { -+ u32 i; ++ u32 i, val; + int ret; -+ -+ dev_info(gsw->dev,">>>>>>>>>>>>>>>>>>>>>>>>>>>>> START CALIBRATION:\n"); ++ val = gsw->mmd_read(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403); ++ val |= GBE_EFUSE_SETTING; ++ gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403, val); + for (i = 0; i < 5; i++) { -+ dev_info(gsw->dev, "-------- gephy-calbration (port:%d) --------\n", -+ i); + ret = mt753x_phy_calibration(gsw, i); -+ + /* set Auto-negotiation with giga extension. */ + gsw->mii_write(gsw, i, 0, 0x1340); + if (ret) + return ret; + } -+ return 0; } @@ -45,7 +42,7 @@ #define MMD_CMD_S 14 --- /dev/null +++ b/drivers/net/phy/mtk/mt753x/mt753x_phy.c -@@ -0,0 +1,1061 @@ +@@ -0,0 +1,947 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Common part for MediaTek MT753x gigabit switch @@ -66,9 +63,6 @@ +{ + u32 phy_val; + phy_val = gsw->mmd_read(gsw, port_num, dev_addr, reg_addr); -+ -+ //printk("switch phy cl45 r %d 0x%x 0x%x = %x\n",port_num, dev_addr, reg_addr, phy_val); -+ //switch_phy_read_cl45(port_num, dev_addr, reg_addr, &phy_val); + return phy_val; +} + @@ -77,8 +71,6 @@ + u32 phy_val; + gsw->mmd_write(gsw, port_num, dev_addr, reg_addr, write_data); + phy_val = gsw->mmd_read(gsw, port_num, dev_addr, reg_addr); -+ //printk("switch phy cl45 w %d 0x%x 0x%x 0x%x --> read back 0x%x\n",port_num, dev_addr, reg_addr, write_data, phy_val); -+ //switch_phy_write_cl45(port_num, dev_addr, reg_addr, write_data); +} + +void switch_phy_write(struct gsw_mt753x *gsw, u32 port_num, u32 reg_addr, u32 write_data){ @@ -117,10 +109,7 @@ +{ + u8 all_ana_cal_status; + u32 cnt, tmp_1e_17c; -+ //tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017c, 0x0001); // da_calin_flag pull high + tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0x0001); -+ //printk("delay = %d\n", delay); -+ + cnt = 10000; + do { + udelay(delay); @@ -134,45 +123,10 @@ + tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0); + return all_ana_cal_status; + } else { -+ tmp_1e_17c = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x17c); -+ if ((tmp_1e_17c & 0x1) != 1) { -+ pr_info("FIRST MDC/MDIO write error\n"); -+ pr_info("FIRST 1e_17c = %x\n", tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x17c)); -+ -+ } -+ printk("re-K again\n"); -+ -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0); -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0x0001); -+ cnt = 10000; -+ do { -+ udelay(delay); -+ cnt--; -+ tmp_1e_17c = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x17c); -+ if ((tmp_1e_17c & 0x1) != 1) { -+ pr_info("SECOND MDC/MDIO write error\n"); -+ pr_info("SECOND 1e_17c = %x\n", tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x17c)); -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0x0001); -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0x0001); -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0x0001); -+ } -+ } while ((cnt != 0) && (tmp_1e_17c == 0)); -+ -+ cnt = 10000; -+ do { -+ udelay(delay); -+ cnt--; -+ all_ana_cal_status = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x17b) & 0x1; -+ -+ } while ((all_ana_cal_status == 0) && (cnt != 0)); -+ -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0); ++ pr_info("MDC/MDIO error\n"); ++ return 0; + } + -+ if(all_ana_cal_status == 0){ -+ pr_info("!!!!!!!!!!!! dev1Eh_reg17b ERROR\n"); -+ } -+ + return all_ana_cal_status; +} + @@ -188,12 +142,6 @@ + u8 cnt = 0; + u16 dev1e_17a_tmp, dev1e_e0_tmp; + -+ /* *** Iext/Rext Cal start ************ */ -+ all_ana_cal_status = ANACAL_INIT; -+ /* analog calibration enable, Rext calibration enable */ -+ /* 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a */ -+ /* 1e_dc[0]:rg_txvos_calen */ -+ /* 1e_e1[4]:rg_cal_refsel(0:1.2V) */ + //tc_phy_write_dev_reg(phyaddr, 0x1e, 0x00db, 0x1110) + tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x1110); + //tc_phy_write_dev_reg(phyaddr, 0x1e, 0x00dc, 0x0000); @@ -201,18 +149,15 @@ + //tc_phy_write_dev_reg(phyaddr, 0x1e, 0x00e1, 0x0000); + //tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e1, 0x10); + -+ rg_zcal_ctrl = 0x20;/* start with 0 dB */ -+ dev1e_e0_ana_cal_r5 = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0xe0); // get default value -+ /* 1e_e0[5:0]:rg_zcal_ctrl */ ++ rg_zcal_ctrl = 0x20; ++ dev1e_e0_ana_cal_r5 = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0xe0); + tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0xe0, rg_zcal_ctrl); + all_ana_cal_status = all_ge_ana_cal_wait(gsw, delay, phyaddr);/* delay 20 usec */ -+ + if (all_ana_cal_status == 0) { + all_ana_cal_status = ANACAL_ERROR; + printk(" GE Rext AnaCal ERROR init! \r\n"); + return -1; + } -+ /* 1e_17a[8]:ad_cal_comp_out */ + ad_cal_comp_out_init = (tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a) >> 8) & 0x1; + if (ad_cal_comp_out_init == 1) + calibration_polarity = -1; @@ -236,7 +181,7 @@ + dev1e_17a_tmp = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a); + dev1e_e0_tmp = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0xe0); + if ((rg_zcal_ctrl == 0x3F) || (rg_zcal_ctrl == 0x00)) { -+ all_ana_cal_status = ANACAL_SATURATION; /* need to FT(IC fail?) */ ++ all_ana_cal_status = ANACAL_SATURATION; + printk(" GE Rext AnaCal Saturation! \r\n"); + rg_zcal_ctrl = 0x20; /* 0 dB */ + } @@ -244,13 +189,12 @@ + } + + if (all_ana_cal_status == ANACAL_ERROR) { -+ rg_zcal_ctrl = 0x20; /* 0 dB */ ++ rg_zcal_ctrl = 0x20; + tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e0, (dev1e_e0_ana_cal_r5 | rg_zcal_ctrl)); + } else if(all_ana_cal_status == ANACAL_FINISH){ + //tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e0, (dev1e_e0_ana_cal_r5 | rg_zcal_ctrl)); + tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e0, ((rg_zcal_ctrl << 8) | rg_zcal_ctrl)); + printk("0x1e-e0 = %x\n", tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x00e0)); -+ /* **** 1f_115[2:0] = rg_zcal_ctrl[5:3] // Mog review */ + tc_phy_write_dev_reg(gsw, PHY0, 0x1f, 0x0115, ((rg_zcal_ctrl & 0x3f) >> 3)); + printk("0x1f-115 = %x\n", tc_phy_read_dev_reg(gsw, PHY0, 0x1f, 0x115)); + printk(" GE Rext AnaCal Done! (%d)(0x%x) \r\n", cnt, rg_zcal_ctrl); @@ -272,38 +216,38 @@ + u16 dev1e_e0_ana_cal_r5; + int calibration_polarity; + u8 cnt = 0; -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x1100); // 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0000); // 1e_dc[0]:rg_txvos_calen ++ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x1100); ++ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0000); + + for(calibration_pair = ANACAL_PAIR_A; calibration_pair <= ANACAL_PAIR_D; calibration_pair ++) { -+ rg_zcal_ctrl = 0x20; // start with 0 dB -+ dev1e_e0_ana_cal_r5 = (tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00e0) & (~0x003f)); -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e0, (dev1e_e0_ana_cal_r5 | rg_zcal_ctrl)); // 1e_e0[5:0]:rg_zcal_ctrl ++ rg_zcal_ctrl = 0x20; ++ dev1e_e0_ana_cal_r5 = (tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x00e0) & (~0x003f)); ++ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e0, (dev1e_e0_ana_cal_r5 | rg_zcal_ctrl)); + if(calibration_pair == ANACAL_PAIR_A) + { -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x1101); // 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x1101); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0000); + //printk("R50 pair A 1e_db=%x 1e_db=%x\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00db), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00dc)); + + } + else if(calibration_pair == ANACAL_PAIR_B) + { -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x1100); // 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x1000); // 1e_dc[12]:rg_zcalen_b ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x1100); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x1000); + //printk("R50 pair B 1e_db=%x 1e_db=%x\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00db),tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00dc)); + + } + else if(calibration_pair == ANACAL_PAIR_C) + { -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x1100); // 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0100); // 1e_dc[8]:rg_zcalen_c ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x1100); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0100); + //printk("R50 pair C 1e_db=%x 1e_db=%x\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00db), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00dc)); + + } + else // if(calibration_pair == ANACAL_PAIR_D) + { -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x1100); // 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0010); // 1e_dc[4]:rg_zcalen_d ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x1100); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0010); + //printk("R50 pair D 1e_db=%x 1e_db=%x\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00db), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00dc)); + + } @@ -316,7 +260,7 @@ + return -1; + } + -+ ad_cal_comp_out_init = (tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a)>>8) & 0x1; // 1e_17a[8]:ad_cal_comp_out ++ ad_cal_comp_out_init = (tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a)>>8) & 0x1; + if(ad_cal_comp_out_init == 1) + calibration_polarity = -1; + else @@ -350,11 +294,11 @@ + } + + if(all_ana_cal_status == ANACAL_ERROR) { -+ rg_zcal_ctrl = 0x20; // 0 dB ++ rg_zcal_ctrl = 0x20; + //tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00e0, (dev1e_e0_ana_cal_r5 | rg_zcal_ctrl)); + } + else { -+ rg_zcal_ctrl = MT753x_ZCAL_TO_R50ohm_GE_TBL_100[rg_zcal_ctrl - 9]; // wait Mog zcal/r50 mapping table ++ rg_zcal_ctrl = MT753x_ZCAL_TO_R50ohm_GE_TBL_100[rg_zcal_ctrl - 9]; + printk( " GE R50 AnaCal Done! (%d) (0x%x)(0x%x) \r\n", cnt, rg_zcal_ctrl, (rg_zcal_ctrl|0x80)); + } + @@ -362,7 +306,7 @@ + ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174) & (~0x7f00); + //ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174); + //printk( " GE-a 1e_174(0x%x)(0x%x), 1e_175(0x%x) \r\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174), ad_cal_comp_out_init, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175)); -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0174, (ad_cal_comp_out_init | (((rg_zcal_ctrl<<8)&0xff00) | 0x8000))); // 1e_174[15:8] ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0174, (ad_cal_comp_out_init | (((rg_zcal_ctrl<<8)&0xff00) | 0x8000))); + //printk( " GE-a 1e_174(0x%x), 1e_175(0x%x) \r\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175)); + } + else if(calibration_pair == ANACAL_PAIR_B) { @@ -370,18 +314,18 @@ + //ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174); + //printk( " GE-b 1e_174(0x%x)(0x%x), 1e_175(0x%x) \r\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174), ad_cal_comp_out_init, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175)); + -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0174, (ad_cal_comp_out_init | (((rg_zcal_ctrl<<0)&0x00ff) | 0x0080))); // 1e_174[7:0] ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0174, (ad_cal_comp_out_init | (((rg_zcal_ctrl<<0)&0x00ff) | 0x0080))); + //printk( " GE-b 1e_174(0x%x), 1e_175(0x%x) \r\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175)); + } + else if(calibration_pair == ANACAL_PAIR_C) { + ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175) & (~0x7f00); + //ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175); -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0175, (ad_cal_comp_out_init | (((rg_zcal_ctrl<<8)&0xff00) | 0x8000))); // 1e_175[15:8] ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0175, (ad_cal_comp_out_init | (((rg_zcal_ctrl<<8)&0xff00) | 0x8000))); + //printk( " GE-c 1e_174(0x%x), 1e_175(0x%x) \r\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175)); + } else {// if(calibration_pair == ANACAL_PAIR_D) + ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175) & (~0x007f); + //ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175); -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0175, (ad_cal_comp_out_init | (((rg_zcal_ctrl<<0)&0x00ff) | 0x0080))); // 1e_175[7:0] ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0175, (ad_cal_comp_out_init | (((rg_zcal_ctrl<<0)&0x00ff) | 0x0080))); + //printk( " GE-d 1e_174(0x%x), 1e_175(0x%x) \r\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175)); + } + //tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00e0, ((rg_zcal_ctrl<<8)|rg_zcal_ctrl)); @@ -402,11 +346,10 @@ + u8 tx_offset_reg_shift, tabl_idx, i; + u8 cnt = 0; + u16 tx_offset_reg, reg_temp, cal_temp; -+ //switch_phy_write(phyaddr, R0, 0x2100);//harry tmp -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x0100); // 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0001); // 1e_dc[0]:rg_txvos_calen -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0096, 0x8000); // 1e_96[15]:bypass_tx_offset_cal, Hw bypass, Fw cal -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x003e, 0xf808); // 1e_3e ++ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x0100); ++ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0001); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0096, 0x8000); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x003e, 0xf808); + for(i = 0; i <= 4; i++) + tc_phy_write_dev_reg(gsw, i, 0x1e, 0x00dd, 0x0000); + for(calibration_pair = ANACAL_PAIR_A; calibration_pair <= ANACAL_PAIR_D; calibration_pair ++) @@ -416,45 +359,45 @@ + + if(calibration_pair == ANACAL_PAIR_A) { + //tc_phy_write_dev_reg(phyaddr, 0x1e, 0x145, 0x5010); -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x1000); // 1e_dd[12]:rg_txg_calen_a -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017d, (0x8000|DAC_IN_0V)); // 1e_17d:dac_in0_a -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0181, (0x8000|DAC_IN_0V)); // 1e_181:dac_in1_a ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x1000); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017d, (0x8000|DAC_IN_0V)); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0181, (0x8000|DAC_IN_0V)); + //printk("tx offset pairA 1e_dd = %x, 1e_17d=%x, 1e_181=%x\n", tc_phy_read_dev_reg(phyaddr, 0x1e, 0x00dd), tc_phy_read_dev_reg(phyaddr, 0x1e, 0x017d), tc_phy_read_dev_reg(phyaddr, 0x1e, 0x0181)); + reg_temp = (tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0172) & (~0x3f00)); -+ tx_offset_reg_shift = 8; // 1e_172[13:8] ++ tx_offset_reg_shift = 8; + tx_offset_reg = 0x0172; + + //tc_phy_write_dev_reg(phyaddr, 0x1e, tx_offset_reg, (reg_temp|(tx_offset_temp<>8) & 0x1; // 1e_17a[8]:ad_cal_comp_out ++ ad_cal_comp_out_init = (tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a)>>8) & 0x1; + if(ad_cal_comp_out_init == 1) + calibration_polarity = 1; + else @@ -489,7 +432,7 @@ + all_ana_cal_status = ANACAL_FINISH; + } else { + if((tabl_idx == 0)||(tabl_idx == 0x3f)) { -+ all_ana_cal_status = ANACAL_SATURATION; // need to FT ++ all_ana_cal_status = ANACAL_SATURATION; + printk( " GE Tx offset AnaCal Saturation! \r\n"); + } + } @@ -512,12 +455,12 @@ + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0183, 0x0000); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0184, 0x0000); + -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x0000); // disable analog calibration circuit -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0000); // disable Tx offset calibration circuit -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x0000); // disable analog calibration circuit -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0000); // disable Tx offset calibration circuit -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x003e, 0x0000); // disable Tx VLD force mode -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0000); // disable Tx offset/amplitude calibration circuit ++ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x0000); ++ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0000); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x0000); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0000); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x003e, 0x0000); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0000); +} + +int ge_cal_tx_amp(struct gsw_mt753x *gsw, u8 phyaddr, u32 delay) @@ -528,11 +471,11 @@ + u32 tx_amp_reg_shift; + u16 reg_temp; + u32 tx_amp_temp, tx_amp_reg, cnt=0, tx_amp_reg_100; -+ u32 debug_tmp, reg_backup, reg_tmp; -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x1100); // 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0001); // 1e_dc[0]:rg_txvos_calen -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e1, 0x0010); // 1e_e1[4]:select 1V -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x003e, 0xf808); // 1e_3e:enable Tx VLD ++ u32 reg_backup, reg_tmp; ++ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x1100); ++ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0001); ++ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e1, 0x0010); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x003e, 0xf808); + + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x11, 0xff00); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x27a, 0x33); @@ -541,36 +484,36 @@ + for(i = 0; i <= 4; i++) + tc_phy_write_dev_reg(gsw, i, 0x1e, 0x00dd, 0x0000); + for(calibration_pair = ANACAL_PAIR_A; calibration_pair <= ANACAL_PAIR_D; calibration_pair ++) { -+ tx_amp_temp = 0x20; // start with 0 dB ++ tx_amp_temp = 0x20; + + if(calibration_pair == ANACAL_PAIR_A) { -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x1000); // 1e_dd[12]:tx_a amp calibration enable -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017d, (0x8000|DAC_IN_2V)); // 1e_17d:dac_in0_a -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0181, (0x8000|DAC_IN_2V)); // 1e_181:dac_in1_a ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x1000); // 1e_dd[12] ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017d, (0x8000|DAC_IN_2V)); // 1e_17d ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0181, (0x8000|DAC_IN_2V)); // 1e_181 + reg_temp = (tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x012) & (~0xfc00)); + tx_amp_reg_shift = 10; // 1e_12[15:10] + tx_amp_reg = 0x12; + tx_amp_reg_100 = 0x16; + } else if(calibration_pair == ANACAL_PAIR_B) { -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0100); // 1e_dd[8]:tx_b amp calibration enable -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017e, (0x8000|DAC_IN_2V)); // 1e_17e:dac_in0_b -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0182, (0x8000|DAC_IN_2V)); // 1e_182:dac_in1_b ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0100); // 1e_dd[8] ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017e, (0x8000|DAC_IN_2V)); // 1e_17e ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0182, (0x8000|DAC_IN_2V)); // 1e_182 + reg_temp = (tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x017) & (~0x3f00)); + tx_amp_reg_shift = 8; // 1e_17[13:8] + tx_amp_reg = 0x17; + tx_amp_reg_100 = 0x18; + } else if(calibration_pair == ANACAL_PAIR_C) { -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0010); // 1e_dd[4]:tx_c amp calibration enable -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017f, (0x8000|DAC_IN_2V)); // 1e_17f:dac_in0_c -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0183, (0x8000|DAC_IN_2V)); // 1e_183:dac_in1_c ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0010); // 1e_dd[4] ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017f, (0x8000|DAC_IN_2V)); // 1e_17f ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0183, (0x8000|DAC_IN_2V)); // 1e_183 + reg_temp = (tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x019) & (~0x3f00)); + tx_amp_reg_shift = 8; // 1e_19[13:8] + tx_amp_reg = 0x19; + tx_amp_reg_100 = 0x20; + } else { //if(calibration_pair == ANACAL_PAIR_D) -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0001); // 1e_dd[0]:tx_d amp calibration enable -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0180, (0x8000|DAC_IN_2V)); // 1e_180:dac_in0_d -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0184, (0x8000|DAC_IN_2V)); // 1e_184:dac_in1_d ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0001); // 1e_dd[0] ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0180, (0x8000|DAC_IN_2V)); // 1e_180 ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0184, (0x8000|DAC_IN_2V)); // 1e_184 + reg_temp = (tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x021) & (~0x3f00)); + tx_amp_reg_shift = 8; // 1e_21[13:8] + tx_amp_reg = 0x21; @@ -585,7 +528,7 @@ + return -1; + } + -+ ad_cal_comp_out_init = (tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a)>>8) & 0x1; // 1e_17a[8]:ad_cal_comp_out ++ ad_cal_comp_out_init = (tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a)>>8) & 0x1; // 1e_17a[8] + if(ad_cal_comp_out_init == 1) + calibration_polarity = -1; + else @@ -739,11 +682,10 @@ + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x12); + reg_tmp = ((reg_backup & 0xfc00) >> 10); + reg_tmp -= 8; -+ reg_backup = (reg_backup & (~0xfc00)); -+ reg_backup |= (reg_tmp << 10); ++ reg_backup = 0x0000; ++ reg_backup |= ((reg_tmp << 10) | (reg_tmp << 0)); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x12, reg_backup); + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x12); -+ //printk("PORT[%d] 1e.012 = %x (OFFSET_1000M_PAIR_A)\n", phyaddr, reg_backup); + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x16); + reg_tmp = ((reg_backup & 0x3f) >> 0); + reg_tmp -= 8; @@ -751,17 +693,15 @@ + reg_backup |= (reg_tmp << 0); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x16, reg_backup); + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x16); -+ //printk("PORT[%d] 1e.016 = %x (OFFSET_TESTMODE_1000M_PAIR_A)\n", phyaddr, reg_backup); + } + else if(calibration_pair == ANACAL_PAIR_B){ + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x17); + reg_tmp = ((reg_backup & 0x3f00) >> 8); + reg_tmp -= 8; -+ reg_backup = (reg_backup & (~0x3f00)); -+ reg_backup |= (reg_tmp << 8); ++ reg_backup = 0x0000; ++ reg_backup |= ((reg_tmp << 8) | (reg_tmp << 0)); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x17, reg_backup); + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x17); -+ //printk("PORT[%d] 1e.017 = %x (OFFSET_1000M_PAIR_B)\n", phyaddr, reg_backup); + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x18); + reg_tmp = ((reg_backup & 0x3f) >> 0); + reg_tmp -= 8; @@ -769,7 +709,6 @@ + reg_backup |= (reg_tmp << 0); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x18, reg_backup); + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x18); -+ //printk("PORT[%d] 1e.018 = %x (OFFSET_TESTMODE_1000M_PAIR_B)\n", phyaddr, reg_backup); + } + else if(calibration_pair == ANACAL_PAIR_C){ + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x19); @@ -779,7 +718,6 @@ + reg_backup |= (reg_tmp << 8); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x19, reg_backup); + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x19); -+ //printk("PORT[%d] 1e.019 = %x (OFFSET_1000M_PAIR_C)\n", phyaddr, reg_backup); + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x20); + reg_tmp = ((reg_backup & 0x3f) >> 0); + reg_tmp -= 8; @@ -787,7 +725,6 @@ + reg_backup |= (reg_tmp << 0); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x20, reg_backup); + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x20); -+ //printk("PORT[%d] 1e.020 = %x (OFFSET_TESTMODE_1000M_PAIR_C)\n", phyaddr, reg_backup); + } + else if(calibration_pair == ANACAL_PAIR_D){ + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x21); @@ -797,7 +734,6 @@ + reg_backup |= (reg_tmp << 8); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x21, reg_backup); + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x21); -+ //printk("PORT[%d] 1e.021 = %x (OFFSET_1000M_PAIR_D)\n", phyaddr, reg_backup); + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x22); + reg_tmp = ((reg_backup & 0x3f) >> 0); + reg_tmp -= 8; @@ -805,45 +741,12 @@ + reg_backup |= (reg_tmp << 0); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x22, reg_backup); + reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x22); -+ //printk("PORT[%d] 1e.022 = %x (OFFSET_TESTMODE_1000M_PAIR_D)\n", phyaddr, reg_backup); -+ } -+ -+ if (calibration_pair == ANACAL_PAIR_A){ -+ //printk("PORT (%d) TX_AMP PAIR (A) FINAL CALIBRATION RESULT\n", phyaddr); -+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x12); -+ //printk("1e.012 = 0x%x\n", debug_tmp); -+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x16); -+ //printk("1e.016 = 0x%x\n", debug_tmp); -+ } -+ -+ else if(calibration_pair == ANACAL_PAIR_B){ -+ //printk("PORT (%d) TX_AMP PAIR (A) FINAL CALIBRATION RESULT\n", phyaddr); -+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x17); -+ //printk("1e.017 = 0x%x\n", debug_tmp); -+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x18); -+ //printk("1e.018 = 0x%x\n", debug_tmp); -+ } -+ else if(calibration_pair == ANACAL_PAIR_C){ -+ //printk("PORT (%d) TX_AMP PAIR (A) FINAL CALIBRATION RESULT\n", phyaddr); -+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x19); -+ //printk("1e.019 = 0x%x\n", debug_tmp); -+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x20); -+ //printk("1e.020 = 0x%x\n", debug_tmp); + } -+ else if(calibration_pair == ANACAL_PAIR_D){ -+ //printk("PORT (%d) TX_AMP PAIR (A) FINAL CALIBRATION RESULT\n", phyaddr); -+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x21); -+ //printk("1e.021 = 0x%x\n", debug_tmp); -+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x22); -+ //printk("1e.022 = 0x%x\n", debug_tmp); -+ } -+ -+ + printk( " GE Tx amp AnaCal Done! (pair-%d)(1e_%x = 0x%x)\n", calibration_pair, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg)); + + } else { + if((tx_amp_temp == 0x3f)||(tx_amp_temp == 0x00)) { -+ all_ana_cal_status = ANACAL_SATURATION; // need to FT ++ all_ana_cal_status = ANACAL_SATURATION; + printk( " GE Tx amp AnaCal Saturation! \r\n"); + } + } @@ -865,11 +768,11 @@ + + /* disable analog calibration circuit */ + tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x0000); -+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0000); // disable Tx offset calibration circuit -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x0000); // disable analog calibration circuit -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0000); // disable Tx offset calibration circuit -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x003e, 0x0000); // disable Tx VLD force mode -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0000); // disable Tx offset/amplitude calibration circuit ++ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0000); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x0000); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0000); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x003e, 0x0000); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0000); + + + @@ -886,28 +789,18 @@ + u32 reg_tmp,reg_tmp0, reg_tmp1, i; + u32 CALDLY = 40; + int ret; -+ /* set [12]AN disable, [8]full duplex, [13/6]1000Mbps */ -+ //tc_phy_write_dev_reg(phyaddr, 0x0, 0x0140); + switch_phy_write(gsw, phyaddr, R0, 0x140); + -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x145, 0x1010);/* fix mdi */ -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, RG_185, 0);/* disable tx slew control */ -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x100, 0xc000);/* BG voltage output */ -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x403, 0x1099); //bypass efuse ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x145, 0x1010); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, RG_185, 0); ++ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x100, 0xc000); ++ //tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x403, 0x1099); + +#if (1) -+ // 1f_27c[12:8] cr_da_tx_i2mpb_10m Trimming TX bias setup(@10M) + tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x27c, 0x1f1f); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x27c, 0x3300); + + reg_tmp1 = tc_phy_read_dev_reg(gsw, PHY0, 0x1f, 0x27c); -+ //dev1Fh_reg273h TXVLD DA register - Adjust voltage mode TX amplitude. -+ //tc_phy_write_dev_reg(phyaddr, 0x1f, 0x273, 0); -+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x273, 0x1000); -+ //reg_tmp1 = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x273); -+ //printk("reg_tmp1273 = %x\n", reg_tmp1); -+ /*1e_11 TX overshoot Enable (PAIR A/B/C/D) in gbe mode*/ -+ + reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x11); + reg_tmp = reg_tmp | (0xf << 12); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x11, reg_tmp); @@ -964,13 +857,11 @@ + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x18e, 0x0001); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x18f, 0x0001); + -+ /*da_tx_bias1_b_tx_standby = 5'b10 (dev1eh_reg3aah[12:8])*/ + reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x3aa); + reg_tmp = reg_tmp & ~(0x1f00); + reg_tmp = reg_tmp | 0x2 << 8; + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x3aa, reg_tmp); + -+ /*da_tx_bias1_a_tx_standby = 5'b10 (dev1eh_reg3a9h[4:0])*/ + reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x3a9); + reg_tmp = reg_tmp & ~(0x1f); + reg_tmp = reg_tmp | 0x2; @@ -982,7 +873,7 @@ +{ + u32 reg_tmp1; + -+ pr_info("PORT %d RX_DC_OFFSET\n", phyaddr); ++ //pr_info("PORT %d RX_DC_OFFSET\n", phyaddr); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x96, 0x8000); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x37, 0x3); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x107, 0x4000); @@ -1002,13 +893,11 @@ + tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x114f); + reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a); + reg_tmp = reg_tmp & 0xff; -+ pr_info("before pairA output = %x\n", reg_tmp); + udelay(40); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x1142); + udelay(40); + reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a); + reg_tmp = reg_tmp & 0xff; -+ pr_info("after pairA output = %x\n", reg_tmp); + if ((reg_tmp & 0x80) != 0) + reg_tmp = (~reg_tmp) + 1; + if ((reg_tmp & 0xff) >4) @@ -1023,13 +912,11 @@ + tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x1151); + reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a); + reg_tmp = reg_tmp & 0xff; -+ pr_info("before pairB output = %x\n", reg_tmp); + udelay(40); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x1143); + udelay(40); + reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a); + reg_tmp = reg_tmp & 0xff; -+ pr_info("after pairB output = %x\n", reg_tmp); + if ((reg_tmp & 0x80) != 0) + reg_tmp = (~reg_tmp) + 1; + if ((reg_tmp & 0xff) >4) @@ -1044,13 +931,11 @@ + tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x1153); + reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a); + reg_tmp = reg_tmp & 0xff; -+ pr_info("before pairC output = %x\n", reg_tmp); + udelay(40); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x1144); + udelay(40); + reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a); + reg_tmp = reg_tmp & 0xff; -+ pr_info("after pairC output = %x\n", reg_tmp); + if ((reg_tmp & 0x80) != 0) + reg_tmp = (~reg_tmp) + 1; + if ((reg_tmp & 0xff) >4) @@ -1065,13 +950,11 @@ + tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x1155); + reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a); + reg_tmp = reg_tmp & 0xff; -+ pr_info("before pairD output = %x\n", reg_tmp); + udelay(40); + tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x1145); + udelay(40); + reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a); + reg_tmp = reg_tmp & 0xff; -+ pr_info("after pairD output = %x\n", reg_tmp); + if ((reg_tmp & 0x80) != 0) + reg_tmp = (~reg_tmp) + 1; + if ((reg_tmp & 0xff) >4)