From: Tomasz Maciej Nowak Date: Tue, 25 May 2021 13:26:06 +0000 (+0200) Subject: ipq40xx: add uboot-envtools to default packages X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1984a6bbcaac95c439dd4a6eba2f78c54e9be215;p=openwrt%2Fstaging%2Fwigyori.git ipq40xx: add uboot-envtools to default packages When support for Luma WRTQ-329ACN was added, the instructions for flashing this device include using tools from uboot-envtools package. Unfortunately the OpenWrt buildroot system omits packages from DEVICE_PACKAGES when CONFIG_TARGET_MULTI_PROFILE, CONFIG_TARGET_PER_DEVICE_ROOTFS, CONFIG_TARGET_ALL_PROFILES are set. In result the official images are without tools mentioned in the instruction. The workoround for the fashing would be installing uboot-envtools when booted with initramfs image, but not always the access to internet is available. The other method would be to issue the necesary command in U-Boot environment but some serial terminals default configuration don't work well with pasting lines longer than 80 chars. Therefore add uboot-envtools to default packages, which adds really small flash footprint to rootfs, where increased size usually is not an issue. Signed-off-by: Tomasz Maciej Nowak --- diff --git a/target/linux/ipq40xx/Makefile b/target/linux/ipq40xx/Makefile index 43b1fcb0f9..400612376c 100644 --- a/target/linux/ipq40xx/Makefile +++ b/target/linux/ipq40xx/Makefile @@ -18,6 +18,7 @@ DEFAULT_PACKAGES += \ kmod-usb-dwc3-qcom \ kmod-leds-gpio kmod-gpio-button-hotplug swconfig \ kmod-ath10k-ct wpad-basic-wolfssl \ - kmod-usb3 kmod-usb-dwc3 ath10k-firmware-qca4019-ct + kmod-usb3 kmod-usb-dwc3 ath10k-firmware-qca4019-ct \ + uboot-envtools $(eval $(call BuildTarget)) diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index 2d6186ed99..68e565594d 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -131,8 +131,7 @@ define Device/alfa-network_ap120c-ac DEVICE_VENDOR := ALFA Network DEVICE_MODEL := AP120C-AC SOC := qcom-ipq4018 - DEVICE_PACKAGES := kmod-usb-acm \ - kmod-tpm-i2c-atmel uboot-envtools + DEVICE_PACKAGES := kmod-usb-acm kmod-tpm-i2c-atmel BLOCKSIZE := 128k PAGESIZE := 2048 IMAGE_SIZE := 65536k @@ -151,7 +150,6 @@ endef define Device/aruba_ap-303 $(call Device/aruba_glenmorangie) DEVICE_MODEL := AP-303 - DEVICE_PACKAGES += uboot-envtools endef TARGET_DEVICES += aruba_ap-303 @@ -164,7 +162,7 @@ TARGET_DEVICES += aruba_ap-303h define Device/aruba_ap-365 $(call Device/aruba_glenmorangie) DEVICE_MODEL := AP-365 - DEVICE_PACKAGES += kmod-hwmon-ad7418 uboot-envtools + DEVICE_PACKAGES += kmod-hwmon-ad7418 endef TARGET_DEVICES += aruba_ap-365 @@ -247,7 +245,7 @@ define Device/buffalo_wtr-m2133hp DEVICE_VENDOR := Buffalo DEVICE_MODEL := WTR-M2133HP SOC := qcom-ipq4019 - DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp + DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp BLOCKSIZE := 128k PAGESIZE := 2048 endef @@ -328,7 +326,7 @@ define Device/devolo_magic-2-wifi-next IMAGE_SIZE := 26624k IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata - DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next uboot-envtools + DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next endef TARGET_DEVICES += devolo_magic-2-wifi-next @@ -367,7 +365,7 @@ define Device/edgecore_ecw5211 SOC := qcom-ipq4018 BLOCKSIZE := 128k PAGESIZE := 2048 - DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm uboot-envtools + DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm endef TARGET_DEVICES += edgecore_ecw5211 @@ -551,7 +549,6 @@ define Device/linksys_ea6350v3 UBINIZE_OPTS := -E 5 IMAGES += factory.bin IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3 - DEVICE_PACKAGES := uboot-envtools endef TARGET_DEVICES += linksys_ea6350v3 @@ -567,7 +564,7 @@ define Device/linksys_ea8300 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300 - DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport + DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport endef TARGET_DEVICES += linksys_ea8300 @@ -583,7 +580,7 @@ define Device/linksys_mr8300 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300 - DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport + DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport endef TARGET_DEVICES += linksys_mr8300 @@ -592,7 +589,7 @@ define Device/luma_wrtq-329acn DEVICE_VENDOR := Luma Home DEVICE_MODEL := WRTQ-329ACN SOC := qcom-ipq4018 - DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio uboot-envtools + DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio IMAGE_SIZE := 76632k BLOCKSIZE := 128k PAGESIZE := 2048 @@ -673,7 +670,6 @@ define Device/openmesh_a42 IMAGES += factory.bin IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata - DEVICE_PACKAGES := uboot-envtools endef TARGET_DEVICES += openmesh_a42 @@ -689,7 +685,7 @@ define Device/openmesh_a62 IMAGES += factory.bin IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata - DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools + DEVICE_PACKAGES := ath10k-firmware-qca9888-ct endef TARGET_DEVICES += openmesh_a62 @@ -705,7 +701,7 @@ define Device/plasmacloud_pa1200 IMAGES += factory.bin IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata - DEVICE_PACKAGES := uboot-envtools ipq-wifi-plasmacloud-pa1200 + DEVICE_PACKAGES := ipq-wifi-plasmacloud-pa1200 endef TARGET_DEVICES += plasmacloud_pa1200 @@ -721,7 +717,7 @@ define Device/plasmacloud_pa2200 IMAGES += factory.bin IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata - DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud-pa2200 uboot-envtools + DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud-pa2200 endef TARGET_DEVICES += plasmacloud_pa2200 @@ -815,7 +811,7 @@ define Device/zyxel_nbg6617 # this minimum-size. However, the larger image can be flashed both ways. IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata - DEVICE_PACKAGES := uboot-envtools kmod-usb-ledtrig-usbport + DEVICE_PACKAGES := kmod-usb-ledtrig-usbport endef TARGET_DEVICES += zyxel_nbg6617