From: Felix Fietkau Date: Sat, 9 Oct 2010 00:36:59 +0000 (+0000) Subject: iw: add support for the new survey data X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=19318689272c258df052d6d628dabb10e76300b7;p=openwrt%2Fstaging%2Frmilecki.git iw: add support for the new survey data SVN-Revision: 23351 --- diff --git a/package/iw/patches/001-nl80211_sync.patch b/package/iw/patches/001-nl80211_sync.patch index ef3bd15dd67..83da75e07cd 100644 --- a/package/iw/patches/001-nl80211_sync.patch +++ b/package/iw/patches/001-nl80211_sync.patch @@ -11,7 +11,35 @@ * It is also sent as an event, with the BSSID and response IEs when the * connection is established or failed to be established. This can be * determined by the STATUS_CODE attribute. -@@ -686,6 +688,15 @@ enum nl80211_commands { +@@ -313,8 +315,8 @@ + * channel for the specified amount of time. This can be used to do + * off-channel operations like transmit a Public Action frame and wait for + * a response while being associated to an AP on another channel. +- * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which +- * radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the ++ * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus ++ * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the + * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be + * optionally used to specify additional channel parameters. + * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds +@@ -385,6 +387,8 @@ + * of any other interfaces, and other interfaces will again take + * precedence when they are used. + * ++ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. ++ * + * @NL80211_CMD_MAX: highest used command number + * @__NL80211_CMD_AFTER_LAST: internal use + */ +@@ -487,6 +491,7 @@ enum nl80211_commands { + NL80211_CMD_NOTIFY_CQM, + + NL80211_CMD_SET_CHANNEL, ++ NL80211_CMD_SET_WDS_PEER, + + /* add new commands above here */ + +@@ -686,6 +691,15 @@ enum nl80211_commands { * request, the driver will assume that the port is unauthorized until * authorized by user space. Otherwise, port is marked authorized by * default in station mode. @@ -27,17 +55,29 @@ * * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. * We recommend using nested, driver-specific attributes within this. -@@ -951,6 +962,9 @@ enum nl80211_attrs { +@@ -787,6 +801,9 @@ enum nl80211_commands { + * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING + * for non-automatic settings. + * ++ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly ++ * means support for per-station GTKs. ++ * + * @NL80211_ATTR_MAX: highest attribute number currently defined + * @__NL80211_ATTR_AFTER_LAST: internal use + */ +@@ -951,6 +968,11 @@ enum nl80211_attrs { NL80211_ATTR_RX_FRAME_TYPES, NL80211_ATTR_FRAME_TYPE, + NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, ++ ++ NL80211_ATTR_SUPPORT_IBSS_RSN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -@@ -1006,6 +1020,8 @@ enum nl80211_attrs { +@@ -1006,6 +1028,8 @@ enum nl80211_attrs { * @NL80211_IFTYPE_WDS: wireless distribution interface * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames * @NL80211_IFTYPE_MESH_POINT: mesh point @@ -46,7 +86,7 @@ * @NL80211_IFTYPE_MAX: highest interface type number currently defined * @NUM_NL80211_IFTYPES: number of defined interface types * -@@ -1022,6 +1038,8 @@ enum nl80211_iftype { +@@ -1022,6 +1046,8 @@ enum nl80211_iftype { NL80211_IFTYPE_WDS, NL80211_IFTYPE_MONITOR, NL80211_IFTYPE_MESH_POINT, @@ -55,19 +95,85 @@ /* keep last */ NUM_NL80211_IFTYPES, -@@ -1382,6 +1400,7 @@ enum nl80211_reg_rule_flags { +@@ -1111,6 +1137,8 @@ enum nl80211_rate_info { + * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) + * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this + * station) ++ * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station) ++ * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station) + */ + enum nl80211_sta_info { + __NL80211_STA_INFO_INVALID, +@@ -1124,6 +1152,8 @@ enum nl80211_sta_info { + NL80211_STA_INFO_TX_BITRATE, + NL80211_STA_INFO_RX_PACKETS, + NL80211_STA_INFO_TX_PACKETS, ++ NL80211_STA_INFO_TX_RETRIES, ++ NL80211_STA_INFO_TX_FAILED, + + /* keep last */ + __NL80211_STA_INFO_AFTER_LAST, +@@ -1382,6 +1412,17 @@ enum nl80211_reg_rule_flags { * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) + * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used ++ * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio ++ * spent on this channel ++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary ++ * channel was sensed busy (either due to activity or energy detect) ++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension ++ * channel was sensed busy ++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent ++ * receiving data ++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent ++ * transmitting data * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number * currently defined * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use -@@ -1390,6 +1409,7 @@ enum nl80211_survey_info { +@@ -1390,6 +1431,12 @@ enum nl80211_survey_info { __NL80211_SURVEY_INFO_INVALID, NL80211_SURVEY_INFO_FREQUENCY, NL80211_SURVEY_INFO_NOISE, + NL80211_SURVEY_INFO_IN_USE, ++ NL80211_SURVEY_INFO_CHANNEL_TIME, ++ NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY, ++ NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY, ++ NL80211_SURVEY_INFO_CHANNEL_TIME_RX, ++ NL80211_SURVEY_INFO_CHANNEL_TIME_TX, /* keep last */ __NL80211_SURVEY_INFO_AFTER_LAST, +@@ -1636,11 +1683,14 @@ enum nl80211_auth_type { + * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key + * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key + * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) ++ * @NUM_NL80211_KEYTYPES: number of defined key types + */ + enum nl80211_key_type { + NL80211_KEYTYPE_GROUP, + NL80211_KEYTYPE_PAIRWISE, + NL80211_KEYTYPE_PEERKEY, ++ ++ NUM_NL80211_KEYTYPES + }; + + /** +@@ -1671,6 +1721,9 @@ enum nl80211_wpa_versions { + * CCMP keys, each six bytes in little endian + * @NL80211_KEY_DEFAULT: flag indicating default key + * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key ++ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not ++ * specified the default depends on whether a MAC address was ++ * given with the command using the key or not (u32) + * @__NL80211_KEY_AFTER_LAST: internal + * @NL80211_KEY_MAX: highest key attribute + */ +@@ -1682,6 +1735,7 @@ enum nl80211_key_attributes { + NL80211_KEY_SEQ, + NL80211_KEY_DEFAULT, + NL80211_KEY_DEFAULT_MGMT, ++ NL80211_KEY_TYPE, + + /* keep last */ + __NL80211_KEY_AFTER_LAST, diff --git a/package/iw/patches/100-survey_freq_in_use.patch b/package/iw/patches/100-survey_freq_in_use.patch index e6e7eafdf4e..3933ae379f3 100644 --- a/package/iw/patches/100-survey_freq_in_use.patch +++ b/package/iw/patches/100-survey_freq_in_use.patch @@ -1,11 +1,14 @@ --- a/survey.c +++ b/survey.c -@@ -46,6 +46,8 @@ static int print_survey_handler(struct n +@@ -44,8 +44,9 @@ static int print_survey_handler(struct n + } + if (sinfo[NL80211_SURVEY_INFO_FREQUENCY]) - printf("\tfrequency:\t%u MHz\n", - nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY])); -+ if (sinfo[NL80211_SURVEY_INFO_IN_USE]) -+ printf("\tin use\n"); +- printf("\tfrequency:\t%u MHz\n", +- nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY])); ++ printf("\tfrequency:\t%u MHz%s\n", ++ nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]), ++ sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : ""); if (sinfo[NL80211_SURVEY_INFO_NOISE]) printf("\tnoise:\t\t%d dBm\n", (int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE])); diff --git a/package/iw/patches/110-survey_phy_stats.patch b/package/iw/patches/110-survey_phy_stats.patch new file mode 100644 index 00000000000..cdd5c2e4870 --- /dev/null +++ b/package/iw/patches/110-survey_phy_stats.patch @@ -0,0 +1,32 @@ +--- a/survey.c ++++ b/survey.c +@@ -44,12 +44,27 @@ static int print_survey_handler(struct n + } + + if (sinfo[NL80211_SURVEY_INFO_FREQUENCY]) +- printf("\tfrequency:\t%u MHz%s\n", ++ printf("\tfrequency:\t\t\t%u MHz%s\n", + nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]), + sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : ""); + if (sinfo[NL80211_SURVEY_INFO_NOISE]) +- printf("\tnoise:\t\t%d dBm\n", ++ printf("\tnoise:\t\t\t\t%d dBm\n", + (int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE])); ++ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME]) ++ printf("\tchannel active time:\t\t%lld ms\n", ++ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME])); ++ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY]) ++ printf("\tchannel busy time:\t\t%lld ms\n", ++ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY])); ++ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY]) ++ printf("\textension channel busy time:\t%lld ms\n", ++ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY])); ++ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX]) ++ printf("\tchannel receive time:\t\t%lld ms\n", ++ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX])); ++ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX]) ++ printf("\tchannel transmit time:\t\t%lld ms\n", ++ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX])); + return NL_SKIP; + } +