From: David Bauer <mail@david-bauer.net>
Date: Fri, 6 Sep 2019 22:43:19 +0000 (+0200)
Subject: ath79: fix UniFi AC LED mapping
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=18fa749df8bd9fe292c93f60ddd3fb963a78274a;p=openwrt%2Fstaging%2Fneocturne.git

ath79: fix UniFi AC LED mapping

The UniFi AC LED mapping is currently off. The blue/white LED are used
as WiFi indicators, while the vendor firmware does not feature WiFI
LEDs.

Instead, the LEDs are used to indicate the devices status. Align the LED
mapping to match the vendor firmware as good as possible.

Signed-off-by: David Bauer <mail@david-bauer.net>
---

diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi b/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
index 3ee43a6d4b..fdd4a01d86 100644
--- a/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
+++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
@@ -6,6 +6,13 @@
 #include "qca956x.dtsi"
 
 / {
+	aliases {
+		led-boot = &led_white;
+		led-failsafe = &led_white;
+		led-running = &led_blue;
+		led-upgrade = &led_blue;
+	};
+
 	chosen {
 		bootargs = "console=ttyS0,115200n8";
 	};
@@ -13,16 +20,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wifi_ac {
+		led_white: led_white {
 			label = "ubnt:white:dome";
 			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
 		};
 
-		wifi_n {
+		led_blue: led_blue {
 			label = "ubnt:blue:dome";
 			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
 		};
 
 	};