From: Christian Marangi Date: Tue, 25 Jun 2024 10:20:14 +0000 (+0200) Subject: ipq806x: fix broken line break with Linksys e8350-v1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=18e2c65aa9333889bc37ecd8f0add24e641c2fb1;p=openwrt%2Fstaging%2Fansuel.git ipq806x: fix broken line break with Linksys e8350-v1 Fix broken line break for Linksys e8350-v1 pushed with CRLF instead of LF. Fixes: 45b3c620e597 ("ipq806x: add support for Linksys e8350-v1") Signed-off-by: Christian Marangi --- diff --git a/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8064-e8350-v1.dts b/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8064-e8350-v1.dts index 2bd34c3032..4ed9401a64 100644 --- a/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8064-e8350-v1.dts +++ b/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8064-e8350-v1.dts @@ -1,428 +1,428 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include -#include - -/ { - model = "Linksys E8350 V1 WiFi Router"; - compatible = "linksys,e8350-v1", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - aliases { - serial0 = &gsbi4_serial; - - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_power: power { - label = "green:power"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - wps { - label = "green:wps"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - - wifi { - label = "green:wifi"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&nand { - status = "okay"; - - #address-cells = <1>; - #size-cells = <1>; - - nand@0 { - reg = <0>; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - - partitions { - compatible = "fixed-partitions"; - - partition@0 { - label = "ubi"; - reg = <0 0x4000000>; - }; - partition@4000000 { - label = "extra"; - reg = <0x4000000 0x4000000>; - }; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio68","gpio65", "gpio67"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio26","gpio53", "gpio54"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - switch_reset: switch_reset_pins { - mux { - pins = "gpio63"; - function = "gpio"; - drive-strength = <12>; - bias-pull-up; - }; - }; -}; - -&gsbi5 { - qcom,mode = ; - status = "okay"; - - spi5: spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <51200000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:sbl1"; - reg = <0x0000000 0x0010000>; - read-only; - }; - - partition@10000 { - label = "0:mibib"; - reg = <0x0010000 0x0020000>; - read-only; - }; - - partition@30000 { - label = "0:sbl2"; - reg = <0x0030000 0x0020000>; - read-only; - }; - - partition@50000 { - label = "0:sbl3"; - reg = <0x0050000 0x0030000>; - read-only; - }; - - partition@80000 { - label = "0:ddrconfig"; - reg = <0x0080000 0x0010000>; - read-only; - }; - - partition@90000 { - label = "0:ssd"; - reg = <0x0090000 0x0010000>; - read-only; - }; - - partition@a0000 { - label = "0:tz"; - reg = <0x00a0000 0x0030000>; - read-only; - }; - - partition@d0000 { - label = "0:rpm"; - reg = <0x00d0000 0x0020000>; - read-only; - }; - - partition@f0000 { - label = "0:oldappsbl"; - reg = <0x00f0000 0x0040000>; - read-only; - }; - - partition@130000 { - label = "0:appsblenv"; - reg = <0x0130000 0x0040000>; - read-only; - }; - - art: partition@170000 { - label = "0:ART"; - reg = <0x0170000 0x0020000>; - read-only; - }; - - partition@190000 { - label = "0:uboot"; - reg = <0x0190000 0x0050000>; - read-only; - }; - - partition@1e0000 { - label = "0:oldnss1"; - reg = <0x01e0000 0x0020000>; - read-only; - }; - - partition@200000 { - label = "0:nvram"; - reg = <0x0200000 0x0020000>; - read-only; - }; - - partition@220000 { - label = "0:oldkernel"; - reg = <0x0220000 0x01e0000>; - read-only; - }; - }; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - max-link-speed = <1>; -}; - -&pcie1 { - status = "okay"; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - /* Switch from documentation require at least 12ms for reset */ - reset-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>; - reset-post-delay-us = <12000>; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&tcsr { - qcom,usb-ctrl-select = ; - compatible = "qcom,tcsr", "syscon"; -}; - -&adm_dma { - status = "okay"; -}; +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +#include "qcom-ipq8064-v2.0-smb208.dtsi" + +#include +#include + +/ { + model = "Linksys E8350 V1 WiFi Router"; + compatible = "linksys,e8350-v1", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + aliases { + serial0 = &gsbi4_serial; + + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + led_power: power { + label = "green:power"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + wps { + label = "green:wps"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + }; + + wifi { + label = "green:wifi"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&nand { + status = "okay"; + + #address-cells = <1>; + #size-cells = <1>; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + + partitions { + compatible = "fixed-partitions"; + + partition@0 { + label = "ubi"; + reg = <0 0x4000000>; + }; + partition@4000000 { + label = "extra"; + reg = <0x4000000 0x4000000>; + }; + }; + }; +}; + +&qcom_pinmux { + button_pins: button_pins { + mux { + pins = "gpio68","gpio65", "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio26","gpio53", "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + switch_reset: switch_reset_pins { + mux { + pins = "gpio63"; + function = "gpio"; + drive-strength = <12>; + bias-pull-up; + }; + }; +}; + +&gsbi5 { + qcom,mode = ; + status = "okay"; + + spi5: spi@1a280000 { + status = "okay"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <51200000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:sbl1"; + reg = <0x0000000 0x0010000>; + read-only; + }; + + partition@10000 { + label = "0:mibib"; + reg = <0x0010000 0x0020000>; + read-only; + }; + + partition@30000 { + label = "0:sbl2"; + reg = <0x0030000 0x0020000>; + read-only; + }; + + partition@50000 { + label = "0:sbl3"; + reg = <0x0050000 0x0030000>; + read-only; + }; + + partition@80000 { + label = "0:ddrconfig"; + reg = <0x0080000 0x0010000>; + read-only; + }; + + partition@90000 { + label = "0:ssd"; + reg = <0x0090000 0x0010000>; + read-only; + }; + + partition@a0000 { + label = "0:tz"; + reg = <0x00a0000 0x0030000>; + read-only; + }; + + partition@d0000 { + label = "0:rpm"; + reg = <0x00d0000 0x0020000>; + read-only; + }; + + partition@f0000 { + label = "0:oldappsbl"; + reg = <0x00f0000 0x0040000>; + read-only; + }; + + partition@130000 { + label = "0:appsblenv"; + reg = <0x0130000 0x0040000>; + read-only; + }; + + art: partition@170000 { + label = "0:ART"; + reg = <0x0170000 0x0020000>; + read-only; + }; + + partition@190000 { + label = "0:uboot"; + reg = <0x0190000 0x0050000>; + read-only; + }; + + partition@1e0000 { + label = "0:oldnss1"; + reg = <0x01e0000 0x0020000>; + read-only; + }; + + partition@200000 { + label = "0:nvram"; + reg = <0x0200000 0x0020000>; + read-only; + }; + + partition@220000 { + label = "0:oldkernel"; + reg = <0x0220000 0x01e0000>; + read-only; + }; + }; + }; + }; +}; + +&hs_phy_0 { + status = "okay"; +}; + +&ss_phy_0 { + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&hs_phy_1 { + status = "okay"; +}; + +&ss_phy_1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; + + max-link-speed = <1>; +}; + +&pcie1 { + status = "okay"; +}; + +&mdio0 { + status = "okay"; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + /* Switch from documentation require at least 12ms for reset */ + reset-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>; + reset-post-delay-us = <12000>; + + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "sgmii"; + qca,sgmii-enable-pll; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; + }; +}; + +&gmac1 { + status = "okay"; + + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gmac2 { + status = "okay"; + + phy-mode = "sgmii"; + qcom,id = <2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&tcsr { + qcom,usb-ctrl-select = ; + compatible = "qcom,tcsr", "syscon"; +}; + +&adm_dma { + status = "okay"; +};