From: Yinghai Lu Date: Mon, 16 Jul 2007 06:37:59 +0000 (-0700) Subject: serial: convert early_uart to earlycon for 8250 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=18a8bd949d6adb311ea816125ff65050df1f3f6e;p=openwrt%2Fstaging%2Fblogic.git serial: convert early_uart to earlycon for 8250 Beacuse SERIAL_PORT_DFNS is removed from include/asm-i386/serial.h and include/asm-x86_64/serial.h. the serial8250_ports need to be probed late in serial initializing stage. the console_init=>serial8250_console_init=> register_console=>serial8250_console_setup will return -ENDEV, and console ttyS0 can not be enabled at that time. need to wait till uart_add_one_port in drivers/serial/serial_core.c to call register_console to get console ttyS0. that is too late. Make early_uart to use early_param, so uart console can be used earlier. Make it to be bootconsole with CON_BOOT flag, so can use console handover feature. and it will switch to corresponding normal serial console automatically. new command line will be: console=uart8250,io,0x3f8,9600n8 console=uart8250,mmio,0xff5e0000,115200n8 or earlycon=uart8250,io,0x3f8,9600n8 earlycon=uart8250,mmio,0xff5e0000,115200n8 it will print in very early stage: Early serial console at I/O port 0x3f8 (options '9600n8') console [uart0] enabled later for console it will print: console handover: boot [uart0] -> real [ttyS0] Signed-off-by: Cc: Andi Kleen Cc: Bjorn Helgaas Cc: Russell King Cc: Gerd Hoffmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 4d880b3d1f35..62aab585d9d7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -462,13 +462,20 @@ and is between 256 and 4096 characters. It is defined in the file Documentation/networking/netconsole.txt for an alternative. - uart,io,[,options] - uart,mmio,[,options] + uart[8250],io,[,options] + uart[8250],mmio,[,options] Start an early, polled-mode console on the 8250/16550 UART at the specified I/O port or MMIO address, switching to the matching ttyS device later. The options are the same as for ttyS, above. + earlycon= [KNL] Output early console device and options. + uart[8250],io,[,options] + uart[8250],mmio,[,options] + Start an early, polled-mode console on the 8250/16550 + UART at the specified I/O port or MMIO address. + The options are the same as for ttyS, above. + cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver Format: ,,,[,] diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 188fb73c6845..4d9864cc92c9 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -390,10 +390,6 @@ early_console_setup (char *cmdline) if (!efi_setup_pcdp_console(cmdline)) earlycons++; #endif -#ifdef CONFIG_SERIAL_8250_CONSOLE - if (!early_serial_console_init(cmdline)) - earlycons++; -#endif return (earlycons) ? 0 : -1; } diff --git a/drivers/firmware/pcdp.c b/drivers/firmware/pcdp.c index 2b4b76e8bd72..58e9f8e457f8 100644 --- a/drivers/firmware/pcdp.c +++ b/drivers/firmware/pcdp.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include "pcdp.h" @@ -27,7 +28,7 @@ setup_serial_console(struct pcdp_uart *uart) char parity; mmio = (uart->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY); - p += sprintf(p, "console=uart,%s,0x%lx", + p += sprintf(p, "uart8250,%s,0x%lx", mmio ? "mmio" : "io", uart->addr.address); if (uart->baud) { p += sprintf(p, ",%lu", uart->baud); @@ -41,7 +42,8 @@ setup_serial_console(struct pcdp_uart *uart) } } - return early_serial_console_init(options); + add_preferred_console("uart", 8250, &options[9]); + return setup_early_serial8250_console(options); #else return -ENODEV; #endif diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index c84dab083a85..0b3ec38ae614 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2514,12 +2514,18 @@ static int __init serial8250_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } +static int __init serial8250_console_early_setup(void) +{ + return serial8250_find_port_for_earlycon(); +} + static struct uart_driver serial8250_reg; static struct console serial8250_console = { .name = "ttyS", .write = serial8250_console_write, .device = uart_console_device, .setup = serial8250_console_setup, + .early_setup = serial8250_console_early_setup, .flags = CON_PRINTBUFFER, .index = -1, .data = &serial8250_reg, @@ -2533,7 +2539,7 @@ static int __init serial8250_console_init(void) } console_initcall(serial8250_console_init); -static int __init find_port(struct uart_port *p) +int serial8250_find_port(struct uart_port *p) { int line; struct uart_port *port; @@ -2546,26 +2552,6 @@ static int __init find_port(struct uart_port *p) return -ENODEV; } -int __init serial8250_start_console(struct uart_port *port, char *options) -{ - int line; - - line = find_port(port); - if (line < 0) - return -ENODEV; - - add_preferred_console("ttyS", line, options); - printk("Adding console on ttyS%d at %s 0x%lx (options '%s')\n", - line, port->iotype == UPIO_MEM ? "MMIO" : "I/O port", - port->iotype == UPIO_MEM ? (unsigned long) port->mapbase : - (unsigned long) port->iobase, options); - if (!(serial8250_console.flags & CON_ENABLED)) { - serial8250_console.flags &= ~CON_PRINTBUFFER; - register_console(&serial8250_console); - } - return line; -} - #define SERIAL8250_CONSOLE &serial8250_console #else #define SERIAL8250_CONSOLE NULL diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c index 7e511199b4c5..947c20507e1f 100644 --- a/drivers/serial/8250_early.c +++ b/drivers/serial/8250_early.c @@ -17,13 +17,11 @@ * we locate the device directly by its MMIO or I/O port address. * * The user can specify the device directly, e.g., - * console=uart,io,0x3f8,9600n8 - * console=uart,mmio,0xff5e0000,115200n8 - * or platform code can call early_uart_console_init() to set - * the early UART device. - * - * After the normal serial driver starts, we try to locate the - * matching ttyS device and start a console there. + * earlycon=uart8250,io,0x3f8,9600n8 + * earlycon=uart8250,mmio,0xff5e0000,115200n8 + * or + * console=uart8250,io,0x3f8,9600n8 + * console=uart8250,mmio,0xff5e0000,115200n8 */ #include @@ -32,17 +30,21 @@ #include #include #include +#include #include #include +#ifdef CONFIG_FIX_EARLYCON_MEM +#include +#include +#endif -struct early_uart_device { +struct early_serial8250_device { struct uart_port port; char options[16]; /* e.g., 115200n8 */ unsigned int baud; }; -static struct early_uart_device early_device __initdata; -static int early_uart_registered __initdata; +static struct early_serial8250_device early_device; static unsigned int __init serial_in(struct uart_port *port, int offset) { @@ -80,7 +82,7 @@ static void __init putc(struct uart_port *port, int c) serial_out(port, UART_TX, c); } -static void __init early_uart_write(struct console *console, const char *s, unsigned int count) +static void __init early_serial8250_write(struct console *console, const char *s, unsigned int count) { struct uart_port *port = &early_device.port; unsigned int ier; @@ -111,7 +113,7 @@ static unsigned int __init probe_baud(struct uart_port *port) return (port->uartclk / 16) / quot; } -static void __init init_port(struct early_uart_device *device) +static void __init init_port(struct early_serial8250_device *device) { struct uart_port *port = &device->port; unsigned int divisor; @@ -130,10 +132,9 @@ static void __init init_port(struct early_uart_device *device) serial_out(port, UART_LCR, c & ~UART_LCR_DLAB); } -static int __init parse_options(struct early_uart_device *device, char *options) +static int __init parse_options(struct early_serial8250_device *device, char *options) { struct uart_port *port = &device->port; - int mapsize = 64; int mmio, length; if (!options) @@ -143,12 +144,18 @@ static int __init parse_options(struct early_uart_device *device, char *options) if (!strncmp(options, "mmio,", 5)) { port->iotype = UPIO_MEM; port->mapbase = simple_strtoul(options + 5, &options, 0); - port->membase = ioremap(port->mapbase, mapsize); +#ifdef CONFIG_FIX_EARLYCON_MEM + set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, port->mapbase & PAGE_MASK); + port->membase = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); + port->membase += port->mapbase & ~PAGE_MASK; +#else + port->membase = ioremap(port->mapbase, 64); if (!port->membase) { printk(KERN_ERR "%s: Couldn't ioremap 0x%lx\n", __FUNCTION__, port->mapbase); return -ENOMEM; } +#endif mmio = 1; } else if (!strncmp(options, "io,", 3)) { port->iotype = UPIO_PORT; @@ -175,9 +182,16 @@ static int __init parse_options(struct early_uart_device *device, char *options) return 0; } -static int __init early_uart_setup(struct console *console, char *options) +static struct console early_serial8250_console __initdata = { + .name = "uart", + .write = early_serial8250_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1, +}; + +static int __init early_serial8250_setup(char *options) { - struct early_uart_device *device = &early_device; + struct early_serial8250_device *device = &early_device; int err; if (device->port.membase || device->port.iobase) @@ -190,61 +204,48 @@ static int __init early_uart_setup(struct console *console, char *options) return 0; } -static struct console early_uart_console __initdata = { - .name = "uart", - .write = early_uart_write, - .setup = early_uart_setup, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -static int __init early_uart_console_init(void) -{ - if (!early_uart_registered) { - register_console(&early_uart_console); - early_uart_registered = 1; - } - return 0; -} -console_initcall(early_uart_console_init); - -int __init early_serial_console_init(char *cmdline) +int __init setup_early_serial8250_console(char *cmdline) { char *options; int err; - options = strstr(cmdline, "console=uart,"); - if (!options) - return -ENODEV; + options = strstr(cmdline, "uart8250,"); + if (!options) { + options = strstr(cmdline, "uart,"); + if (!options) + return 0; + } options = strchr(cmdline, ',') + 1; - if ((err = early_uart_setup(NULL, options)) < 0) + if ((err = early_serial8250_setup(options)) < 0) return err; - return early_uart_console_init(); + + register_console(&early_serial8250_console); + + return 0; } -static int __init early_uart_console_switch(void) +int __init serial8250_find_port_for_earlycon(void) { - struct early_uart_device *device = &early_device; + struct early_serial8250_device *device = &early_device; struct uart_port *port = &device->port; - int mmio, line; + int line; + int ret; - if (!(early_uart_console.flags & CON_ENABLED)) - return 0; + if (!device->port.membase && !device->port.iobase) + return -ENODEV; - /* Try to start the normal driver on a matching line. */ - mmio = (port->iotype == UPIO_MEM); - line = serial8250_start_console(port, device->options); + line = serial8250_find_port(port); if (line < 0) - printk("No ttyS device at %s 0x%lx for console\n", - mmio ? "MMIO" : "I/O port", - mmio ? port->mapbase : - (unsigned long) port->iobase); + return -ENODEV; - unregister_console(&early_uart_console); - if (mmio) - iounmap(port->membase); + ret = update_console_cmdline("uart", 8250, + "ttyS", line, device->options); + if (ret < 0) + ret = update_console_cmdline("uart", 0, + "ttyS", line, device->options); - return 0; + return ret; } -late_initcall(early_uart_console_switch); + +early_param("earlycon", setup_early_serial8250_console); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 2adbed4e10f3..cab42cbd920d 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -62,8 +62,22 @@ config SERIAL_8250_CONSOLE kernel will automatically use the first serial line, /dev/ttyS0, as system console. + you can set that using a kernel command line option such as + "console=uart8250,io,0x3f8,9600n8" + "console=uart8250,mmio,0xff5e0000,115200n8". + and it will switch to normal serial console when correponding port is + ready. + "earlycon=uart8250,io,0x3f8,9600n8" + "earlycon=uart8250,mmio,0xff5e0000,115200n8". + it will not only setup early console. + If unsure, say N. +config FIX_EARLYCON_MEM + bool + depends on X86 + default y + config SERIAL_8250_GSC tristate depends on SERIAL_8250 && GSC diff --git a/include/asm-i386/fixmap.h b/include/asm-i386/fixmap.h index 80ea052ee3a4..249e753ac805 100644 --- a/include/asm-i386/fixmap.h +++ b/include/asm-i386/fixmap.h @@ -54,6 +54,8 @@ extern unsigned long __FIXADDR_TOP; enum fixed_addresses { FIX_HOLE, FIX_VDSO, + FIX_DBGP_BASE, + FIX_EARLYCON_MEM_BASE, #ifdef CONFIG_X86_LOCAL_APIC FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */ #endif diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h index e797586a5bfc..7b65b5b00034 100644 --- a/include/asm-i386/io.h +++ b/include/asm-i386/io.h @@ -129,6 +129,7 @@ extern void iounmap(volatile void __iomem *addr); */ extern void *bt_ioremap(unsigned long offset, unsigned long size); extern void bt_iounmap(void *addr, unsigned long size); +extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys); /* Use early IO mappings for DMI because it's initialized early */ #define dmi_ioremap bt_ioremap diff --git a/include/asm-x86_64/fixmap.h b/include/asm-x86_64/fixmap.h index e90e1677531b..2acb9b7f6418 100644 --- a/include/asm-x86_64/fixmap.h +++ b/include/asm-x86_64/fixmap.h @@ -35,6 +35,8 @@ enum fixed_addresses { VSYSCALL_LAST_PAGE, VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1, VSYSCALL_HPET, + FIX_DBGP_BASE, + FIX_EARLYCON_MEM_BASE, FIX_HPET_BASE, FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */ FIX_IO_APIC_BASE_0, @@ -84,7 +86,7 @@ static __always_inline unsigned long fix_to_virt(const unsigned int idx) if (idx >= __end_of_fixed_addresses) __this_fixmap_does_not_exist(); - return __fix_to_virt(idx); + return __fix_to_virt(idx); } #endif diff --git a/include/asm-x86_64/io.h b/include/asm-x86_64/io.h index de2cd9a2303a..7475095c5061 100644 --- a/include/asm-x86_64/io.h +++ b/include/asm-x86_64/io.h @@ -144,6 +144,7 @@ extern void early_iounmap(void *addr, unsigned long size); */ extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size); extern void iounmap(volatile void __iomem *addr); +extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys); /* * ISA I/O bus memory addresses are 1:1 with the physical address. diff --git a/include/linux/console.h b/include/linux/console.h index 62ef6e11d0d2..c44d3dfde7a5 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -99,6 +99,7 @@ struct console { struct tty_driver *(*device)(struct console *, int *); void (*unblank)(void); int (*setup)(struct console *, char *); + int (*early_setup)(void); short flags; short index; int cflag; @@ -107,6 +108,7 @@ struct console { }; extern int add_preferred_console(char *name, int idx, char *options); +extern int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options); extern void register_console(struct console *); extern int unregister_console(struct console *); extern struct console *console_drivers; diff --git a/include/linux/serial.h b/include/linux/serial.h index 33fc8cb8ddfb..deb714314fb1 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -177,11 +177,5 @@ struct serial_icounter_struct { #ifdef __KERNEL__ #include -/* Allow architectures to override entries in serial8250_ports[] at run time: */ -struct uart_port; /* forward declaration */ -extern int early_serial_setup(struct uart_port *port); -extern int early_serial_console_init(char *options); -extern int serial8250_start_console(struct uart_port *port, char *options); - #endif /* __KERNEL__ */ #endif /* _LINUX_SERIAL_H */ diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 71310d80c09a..706ee9a4c80c 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -60,4 +60,8 @@ void serial8250_unregister_port(int line); void serial8250_suspend_port(int line); void serial8250_resume_port(int line); +extern int serial8250_find_port(struct uart_port *p); +extern int serial8250_find_port_for_earlycon(void); +extern int setup_early_serial8250_console(char *cmdline); + #endif diff --git a/init/main.c b/init/main.c index 0eb1c7463fe4..038c7cb52390 100644 --- a/init/main.c +++ b/init/main.c @@ -453,7 +453,10 @@ static int __init do_early_param(char *param, char *val) struct obs_kernel_param *p; for (p = __setup_start; p < __setup_end; p++) { - if (p->early && strcmp(param, p->str) == 0) { + if ((p->early && strcmp(param, p->str) == 0) || + (strcmp(param, "console") == 0 && + strcmp(p->str, "earlycon") == 0) + ) { if (p->setup_func(val) != 0) printk(KERN_WARNING "Malformed early option '%s'\n", param); diff --git a/kernel/printk.c b/kernel/printk.c index 7ce9a8c13312..f46cc6dff46e 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -726,6 +726,25 @@ int __init add_preferred_console(char *name, int idx, char *options) return 0; } +int __init update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options) +{ + struct console_cmdline *c; + int i; + + for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++) + if (strcmp(console_cmdline[i].name, name) == 0 && + console_cmdline[i].index == idx) { + c = &console_cmdline[i]; + memcpy(c->name, name_new, sizeof(c->name)); + c->name[sizeof(c->name) - 1] = 0; + c->options = options; + c->index = idx_new; + return i; + } + /* not found */ + return -1; +} + #ifndef CONFIG_DISABLE_CONSOLE_SUSPEND /** * suspend_console - suspend the console subsystem @@ -942,6 +961,9 @@ void register_console(struct console *console) if (preferred_console < 0 || bootconsole || !console_drivers) preferred_console = selected_console; + if (console->early_setup) + console->early_setup(); + /* * See if we want to use this console driver. If we * didn't select a console we take the first one