From: Chuanhong Guo Date: Thu, 2 Aug 2018 07:14:10 +0000 (+0800) Subject: ath79: rename tl-archer-c7 to archer-c7 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=18a2595315b2f123cc449f875a642857aee102b5;p=openwrt%2Fstaging%2Fneocturne.git ath79: rename tl-archer-c7 to archer-c7 This router is called Archer C7 and the tl was used to identify TP-LINK. Since we have added tplink in dts/board name, the tl prefix is useless now. Signed-off-by: Chuanhong Guo --- diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index d88a0f368a..f0233b4b28 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -64,7 +64,7 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "3:lan:1" "5:lan:2" "4:wan" ;; - tplink,tl-archer-c7-v2) + tplink,archer-c7-v2) ucidef_add_switch "switch0" \ "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan" ;; diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 0d58ea0dd4..038573f3e8 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -91,13 +91,13 @@ case "$FIRMWARE" in ath10kcal_extract "ART" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; - tplink,re450-v2) + tplink,archer-c7-v2) ath10kcal_extract "art" 20480 2116 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) ;; - tplink,tl-archer-c7-v2) + tplink,re450-v2) ath10kcal_extract "art" 20480 2116 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; ubnt,unifiac-lite|\ ubnt,unifiac-mesh|\ diff --git a/target/linux/ath79/dts/qca9558_tplink_archer-c7-v2.dts b/target/linux/ath79/dts/qca9558_tplink_archer-c7-v2.dts new file mode 100644 index 0000000000..10e7a65e81 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_tplink_archer-c7-v2.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca9558_tplink_archer-c7.dtsi" + +/ { + compatible = "tplink,archer-c7-v2", "qca,qca9558"; + model = "TP-Link Archer C7 Version 2"; +}; + +&gpio_keys { + rfkill { + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + debounce-interval = <60>; + }; +}; + +&gpio_leds { + wlan5g { + label = "tp-link:green:wlan5g"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy0tpt"; + }; +}; + +&mtdparts { + uboot: u-boot@0 { + reg = <0x000000 0x020000>; + read-only; + }; + + firmware@20000 { + reg = <0x020000 0xfd0000>; + }; + + art: art@ff0000 { + reg = <0xff0000 0x010000>; + read-only; + }; +}; \ No newline at end of file diff --git a/target/linux/ath79/dts/qca9558_tplink_archer-c7.dtsi b/target/linux/ath79/dts/qca9558_tplink_archer-c7.dtsi new file mode 100644 index 0000000000..6fb25a9d2e --- /dev/null +++ b/target/linux/ath79/dts/qca9558_tplink_archer-c7.dtsi @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca9557.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + aliases { + led-status = &system; + }; + + gpio_leds: leds { + compatible = "gpio-leds"; + + system: system { + label = "tp-link:green:system"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + usb1 { + label = "tp-link:green:usb1"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + default-state = "off"; + trigger-sources = <&hub_port1>; + linux,default-trigger = "usbport"; + }; + + usb2 { + label = "tp-link:green:usb2"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + default-state = "off"; + trigger-sources = <&hub_port0>; + linux,default-trigger = "usbport"; + }; + + led_wlan2g: wlan2g { + label = "tp-link:green:wlan2g"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy1tpt"; + }; + + qss { + label = "tp-link:green:qss"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio_keys: keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + reset { + label = "Reset button"; + linux,code = ; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + #size-cells = <0>; + + gpio_usb1_power { + gpio-export,name = "tp-link:power:usb1"; + gpio-export,output = <1>; + gpios = <&gpio 21 GPIO_ACTIVE_HIGH>; + }; + + gpio_usb2_power { + gpio-export,name = "tp-link:power:usb2"; + gpio-export,output = <1>; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + }; + + }; +}; + +&pcie1 { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + + hub_port0: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; + + hub_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + mtdparts: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + + qca,ar8327-initvals = < + 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ + 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ + 0x50 0xc737c737 /* LED_CTRL0 */ + 0x54 0x00000000 /* LED_CTRL1 */ + 0x58 0x00000000 /* LED_CTRL2 */ + 0x5c 0x0030c300 /* LED_CTRL3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + 0x94 0x0000007e /* PORT6 STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <1>; + phy-handle = <&phy0>; + + gmac-config { + device = <&gmac>; + rgmii-enabled = <1>; + }; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&uboot 0x1fc00>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&uboot 0x1fc00>; +}; diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-archer-c7-v2.dts b/target/linux/ath79/dts/qca9558_tplink_tl-archer-c7-v2.dts deleted file mode 100644 index e096db7485..0000000000 --- a/target/linux/ath79/dts/qca9558_tplink_tl-archer-c7-v2.dts +++ /dev/null @@ -1,46 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include -#include - -#include "qca9558_tplink_tl-archer-c7.dtsi" - -/ { - compatible = "tplink,tl-archer-c7-v2", "qca,qca9558"; - model = "TP-Link Archer C7 Version 2"; -}; - -&gpio_keys { - rfkill { - gpios = <&gpio 23 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - debounce-interval = <60>; - }; -}; - -&gpio_leds { - wlan5g { - label = "tp-link:green:wlan5g"; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - default-state = "off"; - linux,default-trigger = "phy0tpt"; - }; -}; - -&mtdparts { - uboot: u-boot@0 { - reg = <0x000000 0x020000>; - read-only; - }; - - firmware@20000 { - reg = <0x020000 0xfd0000>; - }; - - art: art@ff0000 { - reg = <0xff0000 0x010000>; - read-only; - }; -}; \ No newline at end of file diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-archer-c7.dtsi b/target/linux/ath79/dts/qca9558_tplink_tl-archer-c7.dtsi deleted file mode 100644 index 6fb25a9d2e..0000000000 --- a/target/linux/ath79/dts/qca9558_tplink_tl-archer-c7.dtsi +++ /dev/null @@ -1,193 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include -#include - -#include "qca9557.dtsi" - -/ { - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - - aliases { - led-status = &system; - }; - - gpio_leds: leds { - compatible = "gpio-leds"; - - system: system { - label = "tp-link:green:system"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - usb1 { - label = "tp-link:green:usb1"; - gpios = <&gpio 19 GPIO_ACTIVE_LOW>; - default-state = "off"; - trigger-sources = <&hub_port1>; - linux,default-trigger = "usbport"; - }; - - usb2 { - label = "tp-link:green:usb2"; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - default-state = "off"; - trigger-sources = <&hub_port0>; - linux,default-trigger = "usbport"; - }; - - led_wlan2g: wlan2g { - label = "tp-link:green:wlan2g"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - default-state = "off"; - linux,default-trigger = "phy1tpt"; - }; - - qss { - label = "tp-link:green:qss"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - gpio_keys: keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - reset { - label = "Reset button"; - linux,code = ; - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - - gpio-export { - compatible = "gpio-export"; - #size-cells = <0>; - - gpio_usb1_power { - gpio-export,name = "tp-link:power:usb1"; - gpio-export,output = <1>; - gpios = <&gpio 21 GPIO_ACTIVE_HIGH>; - }; - - gpio_usb2_power { - gpio-export,name = "tp-link:power:usb2"; - gpio-export,output = <1>; - gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; - }; - - }; -}; - -&pcie1 { - status = "okay"; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - - hub_port0: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; - -&usb_phy1 { - status = "okay"; -}; - -&usb1 { - status = "okay"; - - hub_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - mtdparts: partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - }; - }; -}; - -&mdio0 { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - - qca,ar8327-initvals = < - 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ - 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ - 0x50 0xc737c737 /* LED_CTRL0 */ - 0x54 0x00000000 /* LED_CTRL1 */ - 0x58 0x00000000 /* LED_CTRL2 */ - 0x5c 0x0030c300 /* LED_CTRL3 */ - 0x7c 0x0000007e /* PORT0_STATUS */ - 0x94 0x0000007e /* PORT6 STATUS */ - >; - }; -}; - -ð0 { - status = "okay"; - - mtd-mac-address = <&uboot 0x1fc00>; - mtd-mac-address-increment = <1>; - phy-handle = <&phy0>; - - gmac-config { - device = <&gmac>; - rgmii-enabled = <1>; - }; -}; - -ð1 { - status = "okay"; - - mtd-mac-address = <&uboot 0x1fc00>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&wmac { - status = "okay"; - mtd-cal-data = <&art 0x1000>; - mtd-mac-address = <&uboot 0x1fc00>; -}; diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 49b28f7599..6c9e7879cb 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -1,6 +1,6 @@ include ./common-tp-link.mk -define Device/tplink_tl-archer-c7-v2 +define Device/tplink_archer-c7-v2 $(Device/tplink-16mlzma) ATH_SOC := qca9558 DEVICE_TITLE := TP-LINK Archer C7 v2 @@ -10,7 +10,7 @@ define Device/tplink_tl-archer-c7-v2 IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU endef -TARGET_DEVICES += tplink_tl-archer-c7-v2 +TARGET_DEVICES += tplink_archer-c7-v2 define Device/tplink_tl-re450-v2 $(Device/tplink)