From: Uwe Kleine-König Date: Mon, 6 Dec 2010 09:03:18 +0000 (+0100) Subject: ARM: imx51: use platform id 2 for imx51-cspi X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=18879e13b11b8c173a773edb258da51abc0bd2cd;p=openwrt%2Fstaging%2Fblogic.git ARM: imx51: use platform id 2 for imx51-cspi The platform id is used to determine the spi bus number, so it should better be different to the ids used for imx51-ecspi. Otherwise it's not possible to use both devices "imx51-cspi.0" and "imx51-ecspi.0". Alternative approaches are to use dynamic bus numbering as offered by the spi framework or let the machine code set the bus number. The downside of both possibilities is that the bus number isn't fixed for the same busses on different machines using i.MX51. LAKML-Reference: 1302100716-21034-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c index f4a60ab6763b..f97eb3615b2c 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -80,7 +80,7 @@ const struct imx_spi_imx_data imx35_cspi_data[] __initconst = { #ifdef CONFIG_SOC_IMX51 const struct imx_spi_imx_data imx51_cspi_data __initconst = - imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 0, , SZ_4K); + imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 2, , SZ_4K); const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { #define imx51_ecspi_data_entry(_id, _hwid) \