From: Felix Fietkau Date: Sat, 24 Jan 2015 20:02:02 +0000 (+0000) Subject: kernel: remove linux 3.3 patches and config X-Git-Tag: reboot~4571 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=186db26d05034df31e0ced1b8b5d7d62ebe39b8f;p=openwrt%2Fopenwrt.git kernel: remove linux 3.3 patches and config Signed-off-by: Felix Fietkau SVN-Revision: 44109 --- diff --git a/target/linux/generic/config-3.3 b/target/linux/generic/config-3.3 deleted file mode 100644 index 4de7995fe4..0000000000 --- a/target/linux/generic/config-3.3 +++ /dev/null @@ -1,3527 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_6PACK is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_9P_FS is not set -# CONFIG_AB3100_CORE is not set -# CONFIG_AB8500_CORE is not set -# CONFIG_ABX500_CORE is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_ACENIC is not set -# CONFIG_ACERHDF is not set -# CONFIG_ACORN_PARTITION is not set -# CONFIG_ACPI_APEI is not set -# CONFIG_ACPI_CUSTOM_METHOD is not set -# CONFIG_ACPI_HED is not set -# CONFIG_ACPI_POWER_METER is not set -# CONFIG_ACPI_QUICKSTART is not set -# CONFIG_AD525X_DPOT is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_ADFS_FS is not set -# CONFIG_ADIS16255 is not set -# CONFIG_ADM6996_PHY is not set -# CONFIG_ADM8211 is not set -CONFIG_AEABI=y -# CONFIG_AFFS_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_AGP is not set -CONFIG_AIO=y -# CONFIG_AIRO is not set -# CONFIG_AIRO_CS is not set -# CONFIG_ALCHEMY_GPIO_INDIRECT is not set -# CONFIG_ALIM7101_WDT is not set -# CONFIG_ALTERA_STAPL is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_AMILO_RFKILL is not set -# CONFIG_ANDROID is not set -CONFIG_ANON_INODES=y -# CONFIG_APDS9802ALS is not set -# CONFIG_APM8018X is not set -# CONFIG_APPLICOM is not set -# CONFIG_AR7 is not set -# CONFIG_AR8216_PHY is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CNS3XXX is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set -# CONFIG_ARCH_DOVE is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_EXYNOS is not set -CONFIG_ARCH_FLATMEM_ENABLE=y -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_GEMINI is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -# CONFIG_ARCH_HIGHBANK is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_LPC32XX is not set -# CONFIG_ARCH_MMP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_MXS is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_NOMADIK is not set -# CONFIG_ARCH_NUC93X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -# CONFIG_ARCH_PICOXCELL is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PRIMA2 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_S3C64XX is not set -# CONFIG_ARCH_S5P64X0 is not set -# CONFIG_ARCH_S5PC100 is not set -# CONFIG_ARCH_S5PV210 is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_SHMOBILE is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_ARCH_TCC_926 is not set -# CONFIG_ARCH_TEGRA is not set -# CONFIG_ARCH_U300 is not set -# CONFIG_ARCH_U8500 is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_VEXPRESS is not set -# CONFIG_ARCH_VT8500 is not set -# CONFIG_ARCH_W90X900 is not set -# CONFIG_ARCH_ZYNQ is not set -# CONFIG_ARCNET is not set -CONFIG_ARM_CPU_TOPOLOGY=y -CONFIG_ARM_DMA_MEM_BUFFERABLE=y -# CONFIG_ARM_ERRATA_326103 is not set -# CONFIG_ARM_ERRATA_364296 is not set -# CONFIG_ARM_ERRATA_411920 is not set -# CONFIG_ARM_ERRATA_430973 is not set -# CONFIG_ARM_ERRATA_458693 is not set -# CONFIG_ARM_ERRATA_460075 is not set -# CONFIG_ARM_ERRATA_720789 is not set -# CONFIG_ARM_ERRATA_742230 is not set -# CONFIG_ARM_ERRATA_742231 is not set -# CONFIG_ARM_ERRATA_743622 is not set -# CONFIG_ARM_ERRATA_751472 is not set -# CONFIG_ARM_ERRATA_754322 is not set -# CONFIG_ARM_ERRATA_754327 is not set -# CONFIG_ARM_ERRATA_764369 is not set -# CONFIG_ARM_PATCH_PHYS_VIRT is not set -# CONFIG_ARM_UNWIND is not set -CONFIG_ARPD=y -# CONFIG_ARTHUR is not set -# CONFIG_ASUS_OLED is not set -# CONFIG_ASYNC_RAID6_TEST is not set -# CONFIG_ASYNC_TX_DMA is not set -# CONFIG_AT76C50X_USB is not set -# CONFIG_ATA is not set -CONFIG_ATAGS_PROC=y -# CONFIG_ATALK is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_ATA_ACPI is not set -CONFIG_ATA_BMDMA=y -# CONFIG_ATA_GENERIC is not set -# CONFIG_ATA_NONSTANDARD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_ATA_PIIX is not set -CONFIG_ATA_SFF=y -# CONFIG_ATA_VERBOSE_ERROR is not set -# CONFIG_ATH5K is not set -# CONFIG_ATH6K_LEGACY is not set -# CONFIG_ATH79 is not set -# CONFIG_ATH9K is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1C is not set -# CONFIG_ATL1E is not set -# CONFIG_ATL2 is not set -# CONFIG_ATM is not set -# CONFIG_ATMEL is not set -# CONFIG_ATMEL_PWM is not set -# CONFIG_ATM_AMBASSADOR is not set -# CONFIG_ATM_BR2684 is not set -CONFIG_ATM_BR2684_IPFILTER=y -# CONFIG_ATM_CLIP is not set -CONFIG_ATM_CLIP_NO_ICMP=y -# CONFIG_ATM_DRIVERS is not set -# CONFIG_ATM_DUMMY is not set -# CONFIG_ATM_ENI is not set -# CONFIG_ATM_FIRESTREAM is not set -# CONFIG_ATM_FORE200E is not set -# CONFIG_ATM_HE is not set -# CONFIG_ATM_HORIZON is not set -# CONFIG_ATM_IA is not set -# CONFIG_ATM_IDT77252 is not set -# CONFIG_ATM_LANAI is not set -# CONFIG_ATM_LANE is not set -# CONFIG_ATM_MPOA is not set -# CONFIG_ATM_NICSTAR is not set -# CONFIG_ATM_SOLOS is not set -# CONFIG_ATM_TCP is not set -# CONFIG_ATM_ZATM is not set -# CONFIG_ATOMIC64_SELFTEST is not set -# CONFIG_ATP is not set -# CONFIG_AUDIT is not set -# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_AUTO_ZRELADDR is not set -# CONFIG_AUXDISPLAY is not set -# CONFIG_AVERAGE is not set -# CONFIG_AX25 is not set -# CONFIG_AX25_DAMA_SLAVE is not set -# CONFIG_AX88796 is not set -# CONFIG_B43 is not set -# CONFIG_B43LEGACY is not set -# CONFIG_B44 is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -CONFIG_BASE_FULL=y -CONFIG_BASE_SMALL=0 -# CONFIG_BATMAN_ADV is not set -# CONFIG_BATTERY_BQ27x00 is not set -# CONFIG_BATTERY_DS2760 is not set -# CONFIG_BATTERY_DS2780 is not set -# CONFIG_BATTERY_DS2782 is not set -# CONFIG_BATTERY_MAX17040 is not set -# CONFIG_BATTERY_MAX17042 is not set -# CONFIG_BATTERY_SBS is not set -# CONFIG_BAYCOM_EPP is not set -# CONFIG_BAYCOM_PAR is not set -# CONFIG_BAYCOM_SER_FDX is not set -# CONFIG_BAYCOM_SER_HDX is not set -# CONFIG_BCM47XX is not set -# CONFIG_BCM63XX is not set -# CONFIG_BCM63XX_PHY is not set -# CONFIG_BCMA is not set -# CONFIG_BCMA_DRIVER_GPIO is not set -CONFIG_BCMA_POSSIBLE=y -# CONFIG_BCM_WIMAX is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_BE2ISCSI is not set -# CONFIG_BE2NET is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_BINARY_PRINTF is not set -# CONFIG_BINFMT_AOUT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_BITREVERSE=y -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_CPQ_DA is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_BLK_DEV_4DRIVES is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI14XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_ATIIXP is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_BSGLIB is not set -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_CS5535 is not set -# CONFIG_BLK_DEV_CS5536 is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_DELKIN is not set -# CONFIG_BLK_DEV_DRBD is not set -# CONFIG_BLK_DEV_DTC2278 is not set -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_HD is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_HT6560B is not set -# CONFIG_BLK_DEV_IDEACPI is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDECS is not set -# CONFIG_BLK_DEV_IDEPCI is not set -# CONFIG_BLK_DEV_IDEPNP is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDE_AU1XXX is not set -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_INITRD=y -# CONFIG_BLK_DEV_INTEGRITY is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_IT8172 is not set -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_LOOP is not set -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_NVME is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_BLK_DEV_QD65XX is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_RBD is not set -# CONFIG_BLK_DEV_RZ1000 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_SD is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_BLK_DEV_THROTTLING is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_UMC8672 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_XIP is not set -CONFIG_BLOCK=y -# CONFIG_BMP085 is not set -# CONFIG_BNA is not set -# CONFIG_BNX2 is not set -# CONFIG_BNX2X is not set -# CONFIG_BONDING is not set -# CONFIG_BOOKE_WDT is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -CONFIG_BOOT_RAW=y -# CONFIG_BPQETHER is not set -CONFIG_BQL=y -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_BRCMFMAC is not set -CONFIG_BRIDGE=y -# CONFIG_BRIDGE_EBT_802_3 is not set -# CONFIG_BRIDGE_EBT_AMONG is not set -# CONFIG_BRIDGE_EBT_ARP is not set -# CONFIG_BRIDGE_EBT_ARPREPLY is not set -# CONFIG_BRIDGE_EBT_BROUTE is not set -# CONFIG_BRIDGE_EBT_DNAT is not set -# CONFIG_BRIDGE_EBT_IP is not set -# CONFIG_BRIDGE_EBT_IP6 is not set -# CONFIG_BRIDGE_EBT_LIMIT is not set -# CONFIG_BRIDGE_EBT_LOG is not set -# CONFIG_BRIDGE_EBT_MARK is not set -# CONFIG_BRIDGE_EBT_MARK_T is not set -# CONFIG_BRIDGE_EBT_NFLOG is not set -# CONFIG_BRIDGE_EBT_PKTTYPE is not set -# CONFIG_BRIDGE_EBT_REDIRECT is not set -# CONFIG_BRIDGE_EBT_SNAT is not set -# CONFIG_BRIDGE_EBT_STP is not set -# CONFIG_BRIDGE_EBT_T_FILTER is not set -# CONFIG_BRIDGE_EBT_T_NAT is not set -# CONFIG_BRIDGE_EBT_ULOG is not set -# CONFIG_BRIDGE_EBT_VLAN is not set -# CONFIG_BRIDGE_IGMP_SNOOPING is not set -# CONFIG_BRIDGE_NETFILTER is not set -# CONFIG_BRIDGE_NF_EBTABLES is not set -# CONFIG_BROADCOM_PHY is not set -CONFIG_BROKEN_ON_SMP=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_BT is not set -# CONFIG_BTRFS_FS is not set -# CONFIG_BT_ATH3K is not set -# CONFIG_BT_BNEP is not set -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -# CONFIG_BT_CMTP is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIBLUECARD is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBT3C is not set -# CONFIG_BT_HCIBTSDIO is not set -# CONFIG_BT_HCIBTUART is not set -# CONFIG_BT_HCIBTUSB is not set -# CONFIG_BT_HCIDTL1 is not set -# CONFIG_BT_HCIUART is not set -# CONFIG_BT_HCIUART_ATH3K is not set -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_H4=y -# CONFIG_BT_HCIUART_LL is not set -# CONFIG_BT_HCIVHCI is not set -# CONFIG_BT_HIDP is not set -CONFIG_BT_L2CAP=y -# CONFIG_BT_MRVL is not set -# CONFIG_BT_RFCOMM is not set -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_SCO=y -CONFIG_BUG=y -# CONFIG_C2PORT is not set -# CONFIG_CAIF is not set -# CONFIG_CAN is not set -# CONFIG_CAPI_AVM is not set -# CONFIG_CAPI_EICON is not set -# CONFIG_CAPI_TRACE is not set -CONFIG_CARDBUS=y -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_CARMA_FPGA is not set -# CONFIG_CARMA_FPGA_PROGRAM is not set -# CONFIG_CASSINI is not set -CONFIG_CAVIUM_OCTEON_HELPER=y -# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set -# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set -# CONFIG_CB710_CORE is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_CC_STACKPROTECTOR is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_CEPH_FS is not set -# CONFIG_CEPH_LIB is not set -# CONFIG_CFG80211 is not set -# CONFIG_CGROUPS is not set -# CONFIG_CGROUP_DEBUG is not set -# CONFIG_CHARGER_GPIO is not set -# CONFIG_CHARGER_LP8727 is not set -# CONFIG_CHARGER_MAX8903 is not set -# CONFIG_CHECKPOINT_RESTORE is not set -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_CHELSIO_T4 is not set -# CONFIG_CHELSIO_T4VF is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_CHR_DEV_SCH is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_CIFS is not set -# CONFIG_CIFS_ACL is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_FSCACHE is not set -# CONFIG_CIFS_NFSD_EXPORT is not set -CONFIG_CIFS_POSIX=y -CONFIG_CIFS_STATS=y -# CONFIG_CIFS_STATS2 is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CLEANCACHE is not set -CONFIG_CLS_U32_MARK=y -# CONFIG_CLS_U32_PERF is not set -CONFIG_CMDLINE="" -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_CMDLINE_EXTEND is not set -# CONFIG_CMDLINE_FORCE is not set -# CONFIG_CMDLINE_FROM_BOOTLOADER is not set -# CONFIG_CNIC is not set -# CONFIG_CODA_FS is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_COMEDI is not set -# CONFIG_COMPACTION is not set -# CONFIG_COMPAL_LAPTOP is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_CONFIGFS_FS is not set -# CONFIG_CONNECTOR is not set -CONFIG_CONSTRUCTORS=y -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_COPS is not set -# CONFIG_CORDIC is not set -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_CPA_DEBUG is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPU_IDLE is not set -# CONFIG_CRAMFS is not set -CONFIG_CRASHLOG=y -# CONFIG_CRASH_DUMP is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_CRC8 is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CRC_T10DIF is not set -CONFIG_CROSS_COMPILE="" -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_AEAD is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_AES_586 is not set -# CONFIG_CRYPTO_AES_NI_INTEL is not set -# CONFIG_CRYPTO_ALGAPI is not set -# CONFIG_CRYPTO_ALGAPI2 is not set -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_BLKCIPHER is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CRC32C_INTEL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_DEV_FSL_CAAM is not set -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_CRYPTO_DEV_MV_CESA is not set -# CONFIG_CRYPTO_DEV_TALITOS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_FIPS is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_GHASH is not set -# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set -# CONFIG_CRYPTO_HASH is not set -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_HW is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_LZO is not set -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_MANAGER2 is not set -CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_PCOMP is not set -# CONFIG_CRYPTO_PCOMP2 is not set -# CONFIG_CRYPTO_PCRYPT is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_RNG is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SALSA20_586 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SEQIV is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_TWOFISH_586 is not set -# CONFIG_CRYPTO_TWOFISH_COMMON is not set -# CONFIG_CRYPTO_USER is not set -# CONFIG_CRYPTO_USER_API_HASH is not set -# CONFIG_CRYPTO_USER_API_SKCIPHER is not set -# CONFIG_CRYPTO_VMAC is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_XZ is not set -# CONFIG_CRYPTO_ZLIB is not set -# CONFIG_CRYSTALHD is not set -# CONFIG_CS5535_MFGPT is not set -# CONFIG_CUSE is not set -# CONFIG_CXT1E1 is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_DCB is not set -# CONFIG_DE600 is not set -# CONFIG_DE620 is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_CREDENTIALS is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -CONFIG_DEBUG_FS=y -# CONFIG_DEBUG_GPIO is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_ICEDCC is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_INFO_REDUCED=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_LL is not set -# CONFIG_DEBUG_LOCKDEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_DEBUG_NX_TEST is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -# CONFIG_DEBUG_PER_CPU_MAPS is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_RODATA is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SECTION_MISMATCH is not set -# CONFIG_DEBUG_SET_MODULE_RONX is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DECNET is not set -CONFIG_DEFAULT_CUBIC=y -CONFIG_DEFAULT_DEADLINE=y -CONFIG_DEFAULT_HOSTNAME="(none)" -CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -# CONFIG_DEFAULT_NOOP is not set -# CONFIG_DEFAULT_RENO is not set -CONFIG_DEFAULT_SECURITY="" -CONFIG_DEFAULT_SECURITY_DAC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -# CONFIG_DEPRECATED_PARAM_STRUCT is not set -# CONFIG_DETECT_HUNG_TASK is not set -# CONFIG_DEVKMEM is not set -CONFIG_DEVPORT=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -# CONFIG_DEVTMPFS is not set -# CONFIG_DEVTMPFS_MOUNT is not set -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_DL2K is not set -# CONFIG_DLM is not set -# CONFIG_DM9000 is not set -# CONFIG_DMADEVICES is not set -# CONFIG_DMADEVICES_DEBUG is not set -# CONFIG_DMASCC is not set -# CONFIG_DMATEST is not set -# CONFIG_DMA_API_DEBUG is not set -# CONFIG_DMA_ENGINE is not set -# CONFIG_DMA_SHARED_BUFFER is not set -# CONFIG_DM_DEBUG is not set -# CONFIG_DM_DELAY is not set -# CONFIG_DM_FLAKEY is not set -# CONFIG_DM_LOG_USERSPACE is not set -# CONFIG_DM_MULTIPATH is not set -# CONFIG_DM_RAID is not set -# CONFIG_DM_THIN_PROVISIONING is not set -# CONFIG_DM_UEVENT is not set -# CONFIG_DM_ZERO is not set -# CONFIG_DNET is not set -# CONFIG_DNOTIFY is not set -CONFIG_DQL=y -# CONFIG_DRAGONRISE_FF is not set -# CONFIG_DRM is not set -# CONFIG_DS1682 is not set -# CONFIG_DTLK is not set -# CONFIG_DUMMY is not set -# CONFIG_DVB_CORE is not set -# CONFIG_DW_WATCHDOG is not set -# CONFIG_DX_SEP is not set -# CONFIG_DYNAMIC_DEBUG is not set -# CONFIG_E100 is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_E2100 is not set -# CONFIG_EASYCAP is not set -# CONFIG_ECHO is not set -# CONFIG_ECONET is not set -# CONFIG_ECRYPT_FS is not set -# CONFIG_EDAC is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_EEPROM_93XX46 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_AT25 is not set -# CONFIG_EEPROM_DIGSY_MTC_CFG is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_EEPROM_MAX6875 is not set -# CONFIG_EEXPRESS is not set -# CONFIG_EEXPRESS_PRO is not set -CONFIG_EFI_PARTITION=y -# CONFIG_EFS_FS is not set -# CONFIG_ELF_CORE is not set -CONFIG_EMBEDDED=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -# CONFIG_ENC28J60 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_ENCRYPTED_KEYS is not set -# CONFIG_ENIC is not set -# CONFIG_EPIC100 is not set -CONFIG_EPOLL=y -# CONFIG_EQUALIZER is not set -# CONFIG_ET131X is not set -# CONFIG_ETH16I is not set -CONFIG_ETHERNET=y -# CONFIG_ETHOC is not set -CONFIG_EVENTFD=y -# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set -# CONFIG_EWRK3 is not set -CONFIG_EXPERIMENTAL=y -CONFIG_EXPERT=y -# CONFIG_EXPORTFS is not set -# CONFIG_EXT2_FS is not set -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4_DEBUG is not set -# CONFIG_EXT4_FS is not set -# CONFIG_EXT4_FS_POSIX_ACL is not set -# CONFIG_EXT4_FS_SECURITY is not set -CONFIG_EXT4_FS_XATTR=y -CONFIG_EXT4_USE_FOR_EXT23=y -CONFIG_EXTRA_FIRMWARE="" -CONFIG_EXTRA_TARGETS="" -# CONFIG_EZX_PCAP is not set -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_FANOTIFY is not set -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_FAT_FS is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_FB is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_ARC is not set -# CONFIG_FB_ARK is not set -# CONFIG_FB_ARMCLCD is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_BOOT_VESA_SUPPORT is not set -# CONFIG_FB_BROADSHEET is not set -# CONFIG_FB_CARMINE is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_DDC is not set -# CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_GEODE is not set -# CONFIG_FB_HGA is not set -# CONFIG_FB_IBM_GXT4500 is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_LE80578 is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_MB862XX is not set -# CONFIG_FB_METRONOME is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_N411 is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_OF is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_PS3 is not set -# CONFIG_FB_PXA is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_SM7XX is not set -# CONFIG_FB_SMSCUFX is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_FOPS is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_TMIO is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_UDL is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_VIA is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_VT8623 is not set -# CONFIG_FB_XGI is not set -# CONFIG_FCOE is not set -# CONFIG_FCOE_FNIC is not set -# CONFIG_FDDI is not set -# CONFIG_FEALNX is not set -# CONFIG_FHANDLE is not set -CONFIG_FIB_RULES=y -CONFIG_FILE_LOCKING=y -# CONFIG_FIREWIRE is not set -# CONFIG_FIREWIRE_NOSY is not set -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FIRMWARE_IN_KERNEL is not set -# CONFIG_FIXED_PHY is not set -CONFIG_FLATMEM=y -CONFIG_FLATMEM_MANUAL=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_FORCEDETH is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -# CONFIG_FRAMEBUFFER_CONSOLE is not set -# CONFIG_FRAME_POINTER is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_FREEZER is not set -# CONFIG_FRONTSWAP is not set -# CONFIG_FSCACHE is not set -CONFIG_FSNOTIFY=y -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_FT1000 is not set -# CONFIG_FTGMAC100 is not set -# CONFIG_FTL is not set -# CONFIG_FTMAC100 is not set -# CONFIG_FTRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_FUJITSU_TABLET is not set -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_FUSE_FS is not set -# CONFIG_FUSION is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set -# CONFIG_FUSION_SPI is not set -CONFIG_FUTEX=y -CONFIG_FW_LOADER=y -CONFIG_GACT_PROB=y -# CONFIG_GAMEPORT is not set -# CONFIG_GCOV is not set -# CONFIG_GCOV_KERNEL is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_CPU_DEVICES is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y -# CONFIG_GFS2_FS is not set -# CONFIG_GIGASET_CAPI is not set -# CONFIG_GIGASET_DEBUG is not set -# CONFIG_GPIOLIB is not set -# CONFIG_GPIO_74X164 is not set -# CONFIG_GPIO_ADP5588 is not set -# CONFIG_GPIO_BT8XX is not set -# CONFIG_GPIO_CS5535 is not set -# CONFIG_GPIO_GENERIC_PLATFORM is not set -# CONFIG_GPIO_IT8761E is not set -# CONFIG_GPIO_LANGWELL is not set -# CONFIG_GPIO_MAX7300 is not set -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_MC33880 is not set -# CONFIG_GPIO_MCP23S08 is not set -# CONFIG_GPIO_ML_IOH is not set -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set -# CONFIG_GPIO_PCH is not set -# CONFIG_GPIO_PL061 is not set -# CONFIG_GPIO_RDC321X is not set -# CONFIG_GPIO_SCH is not set -# CONFIG_GPIO_SX150X is not set -# CONFIG_GPIO_SYSFS is not set -# CONFIG_GPIO_VX855 is not set -# CONFIG_GPIO_XILINX is not set -# CONFIG_GREENASIA_FF is not set -# CONFIG_HAMACHI is not set -CONFIG_HAMRADIO=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_HARDLOCKUP_DETECTOR is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HCALL_STATS is not set -# CONFIG_HDLC is not set -# CONFIG_HDLC_CISCO is not set -# CONFIG_HDLC_FR is not set -# CONFIG_HDLC_PPP is not set -# CONFIG_HDLC_RAW is not set -# CONFIG_HDLC_RAW_ETH is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_HERMES is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HIBERNATION is not set -# CONFIG_HID is not set -# CONFIG_HIDRAW is not set -# CONFIG_HID_A4TECH is not set -# CONFIG_HID_ACRUX is not set -# CONFIG_HID_ACRUX_FF is not set -# CONFIG_HID_APPLE is not set -# CONFIG_HID_BELKIN is not set -# CONFIG_HID_CHERRY is not set -# CONFIG_HID_CHICONY is not set -# CONFIG_HID_CYPRESS is not set -# CONFIG_HID_DRAGONRISE is not set -# CONFIG_HID_ELECOM is not set -# CONFIG_HID_EMS_FF is not set -# CONFIG_HID_EZKEY is not set -# CONFIG_HID_GREENASIA is not set -# CONFIG_HID_GYRATION is not set -# CONFIG_HID_HOLTEK is not set -# CONFIG_HID_KENSINGTON is not set -# CONFIG_HID_KEYTOUCH is not set -# CONFIG_HID_KYE is not set -# CONFIG_HID_LCPOWER is not set -# CONFIG_HID_LOGITECH is not set -# CONFIG_HID_MAGICMOUSE is not set -# CONFIG_HID_MICROSOFT is not set -# CONFIG_HID_MONTEREY is not set -# CONFIG_HID_MULTITOUCH is not set -# CONFIG_HID_NTRIG is not set -# CONFIG_HID_ORTEK is not set -# CONFIG_HID_PANTHERLORD is not set -# CONFIG_HID_PETALYNX is not set -# CONFIG_HID_PICOLCD is not set -# CONFIG_HID_PID is not set -# CONFIG_HID_PRIMAX is not set -# CONFIG_HID_PRODIKEYS is not set -# CONFIG_HID_QUANTA is not set -# CONFIG_HID_ROCCAT is not set -# CONFIG_HID_ROCCAT_ARVO is not set -# CONFIG_HID_ROCCAT_KONE is not set -# CONFIG_HID_ROCCAT_KONEPLUS is not set -# CONFIG_HID_ROCCAT_KOVAPLUS is not set -# CONFIG_HID_ROCCAT_PYRA is not set -# CONFIG_HID_SAMSUNG is not set -# CONFIG_HID_SMARTJOYPLUS is not set -# CONFIG_HID_SONY is not set -# CONFIG_HID_SPEEDLINK is not set -# CONFIG_HID_SUNPLUS is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_HID_THRUSTMASTER is not set -# CONFIG_HID_TOPSEED is not set -# CONFIG_HID_TWINHAN is not set -# CONFIG_HID_UCLOGIC is not set -# CONFIG_HID_WACOM is not set -# CONFIG_HID_WALTOP is not set -# CONFIG_HID_WIIMOTE is not set -# CONFIG_HID_ZEROPLUS is not set -# CONFIG_HID_ZYDACRON is not set -# CONFIG_HIGHMEM is not set -CONFIG_HIGH_RES_TIMERS=y -# CONFIG_HIPPI is not set -# CONFIG_HMC6352 is not set -# CONFIG_HOSTAP is not set -# CONFIG_HOSTAP_CS is not set -# CONFIG_HOSTAP_PCI is not set -# CONFIG_HOSTAP_PLX is not set -CONFIG_HOTPLUG=y -# CONFIG_HOTPLUG_CPU is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HP100 is not set -# CONFIG_HPFS_FS is not set -# CONFIG_HPLAN is not set -# CONFIG_HPLAN_PLUS is not set -# CONFIG_HP_ILO is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_I2CPLD is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_HVC_DCC is not set -# CONFIG_HVC_UDBG is not set -# CONFIG_HWMON is not set -# CONFIG_HWMON_DEBUG_CHIP is not set -# CONFIG_HWMON_VID is not set -# CONFIG_HWSPINLOCK_OMAP is not set -CONFIG_HW_PERF_EVENTS=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HW_RANDOM_AMD is not set -# CONFIG_HW_RANDOM_GEODE is not set -# CONFIG_HW_RANDOM_INTEL is not set -# CONFIG_HW_RANDOM_PPC4XX is not set -# CONFIG_HW_RANDOM_TIMERIOMEM is not set -# CONFIG_HW_RANDOM_VIA is not set -# CONFIG_HYPERV is not set -# CONFIG_HYSDN is not set -CONFIG_HZ=100 -CONFIG_HZ_100=y -# CONFIG_HZ_1000 is not set -# CONFIG_HZ_1024 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -# CONFIG_HZ_300 is not set -# CONFIG_HZ_48 is not set -# CONFIG_I2C is not set -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCA is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_CHARDEV is not set -# CONFIG_I2C_COMPAT is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DESIGNWARE is not set -# CONFIG_I2C_DESIGNWARE_PCI is not set -# CONFIG_I2C_DESIGNWARE_PLATFORM is not set -# CONFIG_I2C_DIOLAN_U2C is not set -# CONFIG_I2C_EG20T is not set -# CONFIG_I2C_ELEKTOR is not set -# CONFIG_I2C_GPIO is not set -# CONFIG_I2C_HELPER_AUTO is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_IBM_IIC is not set -# CONFIG_I2C_INTEL_MID is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_MPC is not set -# CONFIG_I2C_MUX is not set -# CONFIG_I2C_MV64XXX is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PXA_PCI is not set -# CONFIG_I2C_SCMI is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_SMBUS is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set -# CONFIG_I2C_VERSATILE is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_XILINX is not set -# CONFIG_I2O is not set -# CONFIG_I82092 is not set -# CONFIG_I82365 is not set -# CONFIG_IBM_ASM is not set -# CONFIG_IBM_EMAC_DEBUG is not set -# CONFIG_IBM_EMAC_EMAC4 is not set -# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set -# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_EMAC_RGMII is not set -# CONFIG_IBM_EMAC_TAH is not set -# CONFIG_IBM_EMAC_ZMII is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_ICS932S401 is not set -# CONFIG_IDE is not set -# CONFIG_IDEAPAD_LAPTOP is not set -# CONFIG_IDE_GD is not set -# CONFIG_IDE_PHISON is not set -# CONFIG_IDE_PROC_FS is not set -# CONFIG_IDE_TASK_IOCTL is not set -# CONFIG_IEEE802154 is not set -# CONFIG_IFB is not set -# CONFIG_IGB is not set -# CONFIG_IGBVF is not set -# CONFIG_IIO is not set -# CONFIG_IKCONFIG is not set -# CONFIG_IKCONFIG_PROC is not set -# CONFIG_IMAGE_CMDLINE_HACK is not set -CONFIG_INET=y -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_DIAG is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_TCP_DIAG is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_UDP_DIAG is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INFINIBAND is not set -# CONFIG_INFTL is not set -# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set -# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set -# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -# CONFIG_INLINE_READ_LOCK is not set -# CONFIG_INLINE_READ_LOCK_BH is not set -# CONFIG_INLINE_READ_LOCK_IRQ is not set -# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set -# CONFIG_INLINE_READ_TRYLOCK is not set -CONFIG_INLINE_READ_UNLOCK=y -# CONFIG_INLINE_READ_UNLOCK_BH is not set -CONFIG_INLINE_READ_UNLOCK_IRQ=y -# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set -# CONFIG_INLINE_SPIN_LOCK is not set -# CONFIG_INLINE_SPIN_LOCK_BH is not set -# CONFIG_INLINE_SPIN_LOCK_IRQ is not set -# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set -# CONFIG_INLINE_SPIN_TRYLOCK is not set -# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set -CONFIG_INLINE_SPIN_UNLOCK=y -# CONFIG_INLINE_SPIN_UNLOCK_BH is not set -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set -# CONFIG_INLINE_WRITE_LOCK is not set -# CONFIG_INLINE_WRITE_LOCK_BH is not set -# CONFIG_INLINE_WRITE_LOCK_IRQ is not set -# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set -# CONFIG_INLINE_WRITE_TRYLOCK is not set -CONFIG_INLINE_WRITE_UNLOCK=y -# CONFIG_INLINE_WRITE_UNLOCK_BH is not set -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set -CONFIG_INOTIFY_USER=y -# CONFIG_INPUT is not set -# CONFIG_INPUT_AD714X is not set -# CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_APANEL is not set -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_ATLAS_BTNS is not set -# CONFIG_INPUT_BMA150 is not set -# CONFIG_INPUT_CM109 is not set -# CONFIG_INPUT_CMA3000 is not set -# CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_GP2A is not set -# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set -# CONFIG_INPUT_GPIO_TILT_POLLED is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_KXTJ9 is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_MMA8450 is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_MPU3050 is not set -# CONFIG_INPUT_PCF8574 is not set -# CONFIG_INPUT_PCSPKR is not set -# CONFIG_INPUT_POLLDEV is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_SPARSEKMAP is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_UINPUT is not set -# CONFIG_INPUT_WISTRON_BTNS is not set -# CONFIG_INPUT_YEALINK is not set -# CONFIG_INTEL_IDLE is not set -# CONFIG_INTEL_MID_PTI is not set -# CONFIG_INTEL_OAKTRAIL is not set -# CONFIG_IOMMU_SUPPORT is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_NOOP=y -# CONFIG_IP1000 is not set -# CONFIG_IP17XX_PHY is not set -# CONFIG_IP6_NF_FILTER is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP6_NF_MANGLE is not set -# CONFIG_IP6_NF_MATCH_AH is not set -# CONFIG_IP6_NF_MATCH_EUI64 is not set -# CONFIG_IP6_NF_MATCH_FRAG is not set -# CONFIG_IP6_NF_MATCH_HL is not set -# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set -# CONFIG_IP6_NF_MATCH_MH is not set -# CONFIG_IP6_NF_MATCH_OPTS is not set -# CONFIG_IP6_NF_MATCH_RPFILTER is not set -# CONFIG_IP6_NF_MATCH_RT is not set -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_RAW is not set -# CONFIG_IP6_NF_TARGET_HL is not set -# CONFIG_IP6_NF_TARGET_LOG is not set -# CONFIG_IP6_NF_TARGET_REJECT is not set -# CONFIG_IPC_NS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPV6 is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_ROUTE_INFO is not set -# CONFIG_IPV6_SIT is not set -# CONFIG_IPV6_SIT_6RD is not set -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPW2100 is not set -# CONFIG_IPW2100_DEBUG is not set -CONFIG_IPW2100_MONITOR=y -# CONFIG_IPW2200 is not set -# CONFIG_IPW2200_DEBUG is not set -CONFIG_IPW2200_MONITOR=y -# CONFIG_IPW2200_PROMISCUOUS is not set -# CONFIG_IPW2200_QOS is not set -# CONFIG_IPW2200_RADIOTAP is not set -# CONFIG_IPWIRELESS is not set -# CONFIG_IPX is not set -CONFIG_IP_ADVANCED_ROUTER=y -# CONFIG_IP_DCCP is not set -# CONFIG_IP_FIB_TRIE_STATS is not set -CONFIG_IP_MROUTE=y -CONFIG_IP_MROUTE_MULTIPLE_TABLES=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_MULTIPLE_TABLES=y -# CONFIG_IP_NF_ARPFILTER is not set -# CONFIG_IP_NF_ARPTABLES is not set -# CONFIG_IP_NF_ARP_MANGLE is not set -# CONFIG_IP_NF_FILTER is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_MATCH_AH is not set -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_RPFILTER is not set -# CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_RAW is not set -# CONFIG_IP_NF_SECURITY is not set -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set -# CONFIG_IP_NF_TARGET_ECN is not set -# CONFIG_IP_NF_TARGET_LOG is not set -# CONFIG_IP_NF_TARGET_MASQUERADE is not set -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_REDIRECT is not set -# CONFIG_IP_NF_TARGET_REJECT is not set -# CONFIG_IP_NF_TARGET_TTL is not set -# CONFIG_IP_NF_TARGET_ULOG is not set -# CONFIG_IP_PIMSM_V1 is not set -# CONFIG_IP_PIMSM_V2 is not set -# CONFIG_IP_PNP is not set -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -# CONFIG_IP_SCTP is not set -# CONFIG_IP_SET is not set -# CONFIG_IP_VS is not set -# CONFIG_IRDA is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_IRQ_ALL_CPUS is not set -# CONFIG_IR_IMON is not set -# CONFIG_IR_JVC_DECODER is not set -# CONFIG_IR_LIRC_CODEC is not set -# CONFIG_IR_MCEUSB is not set -# CONFIG_IR_NEC_DECODER is not set -# CONFIG_IR_RC5_DECODER is not set -# CONFIG_IR_RC5_SZ_DECODER is not set -# CONFIG_IR_RC6_DECODER is not set -# CONFIG_IR_SONY_DECODER is not set -# CONFIG_IR_STREAMZAP is not set -# CONFIG_ISCSI_BOOT_SYSFS is not set -# CONFIG_ISCSI_TCP is not set -CONFIG_ISDN=y -# CONFIG_ISDN_AUDIO is not set -# CONFIG_ISDN_CAPI is not set -# CONFIG_ISDN_CAPI_CAPIDRV is not set -# CONFIG_ISDN_DIVERSION is not set -# CONFIG_ISDN_DRV_ACT2000 is not set -# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set -# CONFIG_ISDN_DRV_GIGASET is not set -# CONFIG_ISDN_DRV_HISAX is not set -# CONFIG_ISDN_DRV_ICN is not set -# CONFIG_ISDN_DRV_LOOP is not set -# CONFIG_ISDN_DRV_PCBIT is not set -# CONFIG_ISDN_DRV_SC is not set -# CONFIG_ISDN_I4L is not set -# CONFIG_ISL29003 is not set -# CONFIG_ISL29020 is not set -# CONFIG_ISO9660_FS is not set -# CONFIG_ISS4xx is not set -# CONFIG_IWL3945 is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWMC3200TOP is not set -# CONFIG_IXGB is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGBEVF is not set -# CONFIG_JBD is not set -# CONFIG_JBD2_DEBUG is not set -# CONFIG_JBD_DEBUG is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_POSIX_ACL is not set -# CONFIG_JFFS2_FS_SECURITY is not set -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_FS_WRITEBUFFER=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_LZMA=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_ZLIB is not set -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_FS is not set -# CONFIG_JFS_POSIX_ACL is not set -# CONFIG_JFS_SECURITY is not set -# CONFIG_JFS_STATISTICS is not set -# CONFIG_JME is not set -CONFIG_JOLIET=y -# CONFIG_JUMP_LABEL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_KERNEL_BZIP2 is not set -# CONFIG_KERNEL_GZIP is not set -# CONFIG_KERNEL_LZMA is not set -# CONFIG_KERNEL_LZO is not set -CONFIG_KERNEL_XZ=y -# CONFIG_KEXEC is not set -# CONFIG_KEYBOARD_ADP5588 is not set -# CONFIG_KEYBOARD_ADP5589 is not set -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_GPIO_POLLED is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_LM8323 is not set -# CONFIG_KEYBOARD_MATRIX is not set -# CONFIG_KEYBOARD_MAX7359 is not set -# CONFIG_KEYBOARD_MCS is not set -# CONFIG_KEYBOARD_MPR121 is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_OPENCORES is not set -# CONFIG_KEYBOARD_PXA27x is not set -# CONFIG_KEYBOARD_QT1070 is not set -# CONFIG_KEYBOARD_QT2160 is not set -# CONFIG_KEYBOARD_SAMSUNG is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_TCA6416 is not set -# CONFIG_KEYBOARD_TCA8418 is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYS is not set -# CONFIG_KEYS_DEBUG_PROC_KEYS is not set -# CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set -# CONFIG_KPROBES is not set -# CONFIG_KS8842 is not set -# CONFIG_KS8851 is not set -# CONFIG_KS8851_MLL is not set -# CONFIG_KSM is not set -# CONFIG_KSZ884X_PCI is not set -# CONFIG_KVM_GUEST is not set -# CONFIG_L2TP is not set -# CONFIG_L2TP_ETH is not set -# CONFIG_L2TP_IP is not set -# CONFIG_L2TP_V3 is not set -# CONFIG_LANMEDIA is not set -# CONFIG_LANTIQ is not set -# CONFIG_LAPB is not set -# CONFIG_LASAT is not set -# CONFIG_LATENCYTOP is not set -CONFIG_LBDAF=y -# CONFIG_LDM_PARTITION is not set -# CONFIG_LEDS_BD2802 is not set -CONFIG_LEDS_CLASS=y -# CONFIG_LEDS_DAC124S085 is not set -# CONFIG_LEDS_GPIO is not set -CONFIG_LEDS_GPIO_OF=y -CONFIG_LEDS_GPIO_PLATFORM=y -# CONFIG_LEDS_INTEL_SS4200 is not set -# CONFIG_LEDS_LM3530 is not set -# CONFIG_LEDS_LP3944 is not set -# CONFIG_LEDS_LP5521 is not set -# CONFIG_LEDS_LP5523 is not set -# CONFIG_LEDS_LT3593 is not set -# CONFIG_LEDS_NET5501 is not set -# CONFIG_LEDS_OT200 is not set -# CONFIG_LEDS_PCA9532 is not set -# CONFIG_LEDS_PCA955X is not set -# CONFIG_LEDS_RENESAS_TPU is not set -# CONFIG_LEDS_TCA6507 is not set -CONFIG_LEDS_TRIGGERS=y -# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -# CONFIG_LEDS_TRIGGER_GPIO is not set -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -# CONFIG_LEDS_TRIGGER_IDE_DISK is not set -# CONFIG_LEDS_TRIGGER_MORSE is not set -CONFIG_LEDS_TRIGGER_NETDEV=y -CONFIG_LEDS_TRIGGER_TIMER=y -# CONFIG_LEDS_TRIGGER_USBDEV is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_LIB80211 is not set -# CONFIG_LIB80211_CRYPT_CCMP is not set -# CONFIG_LIB80211_CRYPT_TKIP is not set -# CONFIG_LIB80211_CRYPT_WEP is not set -# CONFIG_LIB80211_DEBUG is not set -# CONFIG_LIBCRC32C is not set -# CONFIG_LIBERTAS is not set -# CONFIG_LIBERTAS_THINFIRM is not set -# CONFIG_LIBERTAS_USB is not set -# CONFIG_LIBFC is not set -# CONFIG_LIBFCOE is not set -# CONFIG_LIBIPW_DEBUG is not set -# CONFIG_LINE6_USB is not set -# CONFIG_LIRC_STAGING is not set -# CONFIG_LKDTM is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_LOCKD is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_LOCKD_V4=y -# CONFIG_LOCKUP_DETECTOR is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_LOGFS is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGO is not set -CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_LOONGSON_MC146818 is not set -# CONFIG_LP486E is not set -# CONFIG_LPC_SCH is not set -# CONFIG_LP_CONSOLE is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_LTPC is not set -# CONFIG_LXT_PHY is not set -CONFIG_LZMA_COMPRESS=y -CONFIG_LZMA_DECOMPRESS=y -# CONFIG_LZO_COMPRESS is not set -# CONFIG_LZO_DECOMPRESS is not set -# CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE is not set -# CONFIG_MAC80211 is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_JZ4740 is not set -# CONFIG_MACH_LOONGSON is not set -# CONFIG_MACH_NO_WESTBRIDGE is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_MACINTOSH_DRIVERS is not set -# CONFIG_MACVLAN is not set -# CONFIG_MACVTAP is not set -# CONFIG_MAC_EMUMOUSEBTN is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_MARVELL_PHY is not set -# CONFIG_MAX63XX_WATCHDOG is not set -# CONFIG_MD is not set -# CONFIG_MDIO_BITBANG is not set -# CONFIG_MD_FAULTY is not set -# CONFIG_MEDIA_ATTACH is not set -# CONFIG_MEDIA_CONTROLLER is not set -# CONFIG_MEDIA_SUPPORT is not set -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_MEMORY_FAILURE is not set -# CONFIG_MEMSTICK is not set -# CONFIG_MFD_88PM860X is not set -# CONFIG_MFD_AAT2870_CORE is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_CS5535 is not set -# CONFIG_MFD_DA9052_I2C is not set -# CONFIG_MFD_DA9052_SPI is not set -# CONFIG_MFD_JANZ_CMODIO is not set -# CONFIG_MFD_MAX8925 is not set -# CONFIG_MFD_MAX8997 is not set -# CONFIG_MFD_MAX8998 is not set -# CONFIG_MFD_MC13783 is not set -# CONFIG_MFD_MC13XXX is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_MFD_RDC321X is not set -# CONFIG_MFD_S5M_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_STMPE is not set -CONFIG_MFD_SUPPORT=y -# CONFIG_MFD_TC3589X is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set -# CONFIG_MFD_TIMBERDALE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_TPS6586X is not set -# CONFIG_MFD_TPS65910 is not set -# CONFIG_MFD_TPS65912_I2C is not set -# CONFIG_MFD_TPS65912_SPI is not set -# CONFIG_MFD_VX855 is not set -# CONFIG_MFD_WL1273_CORE is not set -# CONFIG_MFD_WM831X is not set -# CONFIG_MFD_WM831X_I2C is not set -# CONFIG_MFD_WM831X_SPI is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8994 is not set -# CONFIG_MG_DISK is not set -# CONFIG_MICREL_KS8995MA is not set -# CONFIG_MICREL_PHY is not set -# CONFIG_MIGRATION is not set -CONFIG_MII=y -# CONFIG_MIKROTIK_RB532 is not set -# CONFIG_MINIX_FS is not set -# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_MIPS_ALCHEMY is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MIPS_FPU_EMU is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MISC_DEVICES=y -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_MISDN is not set -# CONFIG_MISDN_AVMFRITZ is not set -# CONFIG_MISDN_HFCPCI is not set -# CONFIG_MISDN_HFCUSB is not set -# CONFIG_MISDN_INFINEON is not set -# CONFIG_MISDN_NETJET is not set -# CONFIG_MISDN_SPEEDFAX is not set -# CONFIG_MISDN_W6692 is not set -# CONFIG_MKISS is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MMC is not set -# CONFIG_MMC_ARMMMCI is not set -# CONFIG_MMC_AU1X is not set -# CONFIG_MMC_BLOCK is not set -CONFIG_MMC_BLOCK_BOUNCE=y -CONFIG_MMC_BLOCK_MINORS=8 -# CONFIG_MMC_CB710 is not set -# CONFIG_MMC_CLKGATE is not set -# CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_DW is not set -# CONFIG_MMC_MVSDIO is not set -# CONFIG_MMC_S3C is not set -# CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_SDHCI_OF_ESDHC is not set -# CONFIG_MMC_SDHCI_OF_HLWD is not set -# CONFIG_MMC_SDHCI_PXAV2 is not set -# CONFIG_MMC_SDHCI_PXAV3 is not set -# CONFIG_MMC_SDRICOH_CS is not set -# CONFIG_MMC_SPI is not set -# CONFIG_MMC_TEST is not set -# CONFIG_MMC_UNSAFE_RESUME is not set -# CONFIG_MMC_USHC is not set -# CONFIG_MMC_VIA_SDMMC is not set -# CONFIG_MMC_VUB300 is not set -CONFIG_MMU=y -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_GPIO is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_PS2_SENTELIC is not set -# CONFIG_MOUSE_SYNAPTICS_I2C is not set -# CONFIG_MSDOS_FS is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_MSI_LAPTOP is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_AR7_PARTS is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -CONFIG_MTD_CFI=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_DOCG3 is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_GPIO_ADDR is not set -# CONFIG_MTD_INTEL_VR_NOR is not set -# CONFIG_MTD_JEDECPROBE is not set -# CONFIG_MTD_LATCH_ADDR is not set -# CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_M25P80 is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_MYLOADER_PARTS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_NAND_AMS_DELTA is not set -# CONFIG_MTD_NAND_AR934X is not set -# CONFIG_MTD_NAND_ATMEL is not set -# CONFIG_MTD_NAND_AU1550 is not set -# CONFIG_MTD_NAND_AUTCPU12 is not set -# CONFIG_MTD_NAND_BCH is not set -# CONFIG_MTD_NAND_BCM_UMI is not set -# CONFIG_MTD_NAND_BF5XX is not set -# CONFIG_MTD_NAND_CAFE is not set -# CONFIG_MTD_NAND_CM_X270 is not set -# CONFIG_MTD_NAND_CS553X is not set -# CONFIG_MTD_NAND_DAVINCI is not set -# CONFIG_MTD_NAND_DENALI is not set -CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018 -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_ECC is not set -# CONFIG_MTD_NAND_ECC_BCH is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_FSL_ELBC is not set -# CONFIG_MTD_NAND_FSL_UPM is not set -# CONFIG_MTD_NAND_FSMC is not set -# CONFIG_MTD_NAND_GPIO is not set -# CONFIG_MTD_NAND_GPMI_NAND is not set -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_JZ4740 is not set -# CONFIG_MTD_NAND_MPC5121_NFC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_MXC is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_NDFC is not set -# CONFIG_MTD_NAND_NOMADIK is not set -# CONFIG_MTD_NAND_NUC900 is not set -# CONFIG_MTD_NAND_OMAP2 is not set -# CONFIG_MTD_NAND_ORION is not set -# CONFIG_MTD_NAND_PASEMI is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_NAND_PPCHAMELEONEVB is not set -# CONFIG_MTD_NAND_PXA3xx is not set -# CONFIG_MTD_NAND_RB4XX is not set -# CONFIG_MTD_NAND_RB750 is not set -# CONFIG_MTD_NAND_RICOH is not set -# CONFIG_MTD_NAND_RTC_FROM4 is not set -# CONFIG_MTD_NAND_S3C2410 is not set -# CONFIG_MTD_NAND_SHARPSL is not set -# CONFIG_MTD_NAND_SH_FLCTL is not set -# CONFIG_MTD_NAND_SOCRATES is not set -# CONFIG_MTD_NAND_SPIA is not set -# CONFIG_MTD_NAND_TMIO is not set -# CONFIG_MTD_NAND_TXX9NDFMC is not set -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_ONENAND is not set -# CONFIG_MTD_OOPS is not set -# CONFIG_MTD_OTP is not set -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PCMCIA is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_PHYSMAP_COMPAT is not set -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_ROM is not set -CONFIG_MTD_ROOTFS_ROOT_DEV=y -CONFIG_MTD_ROOTFS_SPLIT=y -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_SST25L is not set -# CONFIG_MTD_SWAP is not set -# CONFIG_MTD_TESTS is not set -# CONFIG_MTD_UBI is not set -# CONFIG_MUTEX_SPIN_ON_OWNER is not set -# CONFIG_MV643XX_ETH is not set -# CONFIG_MVSWITCH_PHY is not set -# CONFIG_MWAVE is not set -# CONFIG_MWL8K is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NAMESPACES is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_NATSEMI is not set -# CONFIG_NCP_FS is not set -# CONFIG_NE2000 is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_NEC_MARKEINS is not set -CONFIG_NET=y -# CONFIG_NETCONSOLE is not set -CONFIG_NETDEVICES=y -CONFIG_NETDEV_1000=y -# CONFIG_NETDEV_10000 is not set -# CONFIG_NETFILTER is not set -# CONFIG_NETFILTER_ADVANCED is not set -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NETFILTER_NETLINK_ACCT is not set -# CONFIG_NETFILTER_NETLINK_LOG is not set -# CONFIG_NETFILTER_NETLINK_QUEUE is not set -# CONFIG_NETFILTER_TPROXY is not set -# CONFIG_NETFILTER_XTABLES is not set -# CONFIG_NETFILTER_XT_CONNMARK is not set -# CONFIG_NETFILTER_XT_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set -# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set -# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set -# CONFIG_NETFILTER_XT_MATCH_CPU is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ECN is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_HELPER is not set -# CONFIG_NETFILTER_XT_MATCH_HL is not set -# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set -# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set -# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set -# CONFIG_NETFILTER_XT_MATCH_OSF is not set -# CONFIG_NETFILTER_XT_MATCH_OWNER is not set -# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_RECENT is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set -# CONFIG_NETFILTER_XT_MATCH_STATE is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set -# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set -# CONFIG_NETFILTER_XT_TARGET_CT is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_HL is not set -# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set -# CONFIG_NETFILTER_XT_TARGET_LED is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set -# CONFIG_NETFILTER_XT_TARGET_TEE is not set -# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NETROM is not set -CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NET_9P is not set -# CONFIG_NET_ACT_CSUM is not set -# CONFIG_NET_ACT_GACT is not set -# CONFIG_NET_ACT_IPT is not set -# CONFIG_NET_ACT_MIRRED is not set -# CONFIG_NET_ACT_NAT is not set -# CONFIG_NET_ACT_PEDIT is not set -# CONFIG_NET_ACT_POLICE is not set -# CONFIG_NET_ACT_SIMP is not set -# CONFIG_NET_ACT_SKBEDIT is not set -CONFIG_NET_CADENCE=y -# CONFIG_NET_CALXEDA_XGMAC is not set -CONFIG_NET_CLS=y -# CONFIG_NET_CLS_ACT is not set -# CONFIG_NET_CLS_BASIC is not set -# CONFIG_NET_CLS_FLOW is not set -# CONFIG_NET_CLS_FW is not set -CONFIG_NET_CLS_IND=y -# CONFIG_NET_CLS_ROUTE4 is not set -# CONFIG_NET_CLS_RSVP is not set -# CONFIG_NET_CLS_RSVP6 is not set -# CONFIG_NET_CLS_TCINDEX is not set -# CONFIG_NET_CLS_U32 is not set -CONFIG_NET_CORE=y -# CONFIG_NET_DROP_MONITOR is not set -# CONFIG_NET_DSA is not set -# CONFIG_NET_DSA_MV88E6123_61_65 is not set -# CONFIG_NET_DSA_MV88E6131 is not set -# CONFIG_NET_DSA_MV88E6XXX is not set -# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set -# CONFIG_NET_DSA_TAG_DSA is not set -# CONFIG_NET_DSA_TAG_EDSA is not set -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_EMATCH_CMP is not set -# CONFIG_NET_EMATCH_META is not set -# CONFIG_NET_EMATCH_NBYTE is not set -CONFIG_NET_EMATCH_STACK=32 -# CONFIG_NET_EMATCH_TEXT is not set -# CONFIG_NET_EMATCH_U32 is not set -CONFIG_NET_ETHERNET=y -# CONFIG_NET_FC is not set -# CONFIG_NET_IPGRE is not set -CONFIG_NET_IPGRE_BROADCAST=y -# CONFIG_NET_IPGRE_DEMUX is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_ISA is not set -# CONFIG_NET_KEY is not set -# CONFIG_NET_KEY_MIGRATE is not set -# CONFIG_NET_PACKET_ENGINE is not set -CONFIG_NET_PCI=y -# CONFIG_NET_PCMCIA is not set -# CONFIG_NET_PKTGEN is not set -# CONFIG_NET_POCKET is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_NET_SB1000 is not set -CONFIG_NET_SCHED=y -# CONFIG_NET_SCH_ATM is not set -# CONFIG_NET_SCH_CBQ is not set -# CONFIG_NET_SCH_CHOKE is not set -# CONFIG_NET_SCH_CODEL is not set -# CONFIG_NET_SCH_DRR is not set -# CONFIG_NET_SCH_DSMARK is not set -# CONFIG_NET_SCH_ESFQ is not set -CONFIG_NET_SCH_ESFQ_NFCT=y -CONFIG_NET_SCH_FIFO=y -# CONFIG_NET_SCH_FQ_CODEL is not set -# CONFIG_NET_SCH_GRED is not set -# CONFIG_NET_SCH_HFSC is not set -# CONFIG_NET_SCH_HTB is not set -# CONFIG_NET_SCH_INGRESS is not set -# CONFIG_NET_SCH_MQPRIO is not set -# CONFIG_NET_SCH_MULTIQ is not set -# CONFIG_NET_SCH_NETEM is not set -# CONFIG_NET_SCH_PRIO is not set -# CONFIG_NET_SCH_QFQ is not set -# CONFIG_NET_SCH_RED is not set -# CONFIG_NET_SCH_SFB is not set -# CONFIG_NET_SCH_SFQ is not set -# CONFIG_NET_SCH_TBF is not set -# CONFIG_NET_SCH_TEQL is not set -# CONFIG_NET_TEAM is not set -# CONFIG_NET_TULIP is not set -CONFIG_NET_VENDOR_3COM=y -CONFIG_NET_VENDOR_8390=y -CONFIG_NET_VENDOR_ADAPTEC=y -CONFIG_NET_VENDOR_ALTEON=y -CONFIG_NET_VENDOR_AMD=y -CONFIG_NET_VENDOR_ATHEROS=y -CONFIG_NET_VENDOR_BROADCOM=y -CONFIG_NET_VENDOR_BROCADE=y -CONFIG_NET_VENDOR_CHELSIO=y -CONFIG_NET_VENDOR_CIRRUS=y -CONFIG_NET_VENDOR_CISCO=y -CONFIG_NET_VENDOR_DEC=y -CONFIG_NET_VENDOR_DLINK=y -CONFIG_NET_VENDOR_EMULEX=y -CONFIG_NET_VENDOR_EXAR=y -CONFIG_NET_VENDOR_FARADAY=y -CONFIG_NET_VENDOR_FREESCALE=y -CONFIG_NET_VENDOR_FUJITSU=y -CONFIG_NET_VENDOR_HP=y -CONFIG_NET_VENDOR_I825XX=y -CONFIG_NET_VENDOR_IBM=y -CONFIG_NET_VENDOR_INTEL=y -CONFIG_NET_VENDOR_MARVELL=y -CONFIG_NET_VENDOR_MELLANOX=y -CONFIG_NET_VENDOR_MICREL=y -CONFIG_NET_VENDOR_MICROCHIP=y -CONFIG_NET_VENDOR_MYRI=y -CONFIG_NET_VENDOR_NATSEMI=y -CONFIG_NET_VENDOR_NVIDIA=y -CONFIG_NET_VENDOR_OKI=y -CONFIG_NET_VENDOR_QLOGIC=y -CONFIG_NET_VENDOR_RDC=y -CONFIG_NET_VENDOR_REALTEK=y -CONFIG_NET_VENDOR_SEEQ=y -CONFIG_NET_VENDOR_SILAN=y -CONFIG_NET_VENDOR_SIS=y -CONFIG_NET_VENDOR_SMSC=y -CONFIG_NET_VENDOR_STMICRO=y -CONFIG_NET_VENDOR_SUN=y -CONFIG_NET_VENDOR_TEHUTI=y -CONFIG_NET_VENDOR_TI=y -CONFIG_NET_VENDOR_TOSHIBA=y -CONFIG_NET_VENDOR_VIA=y -CONFIG_NET_VENDOR_XILINX=y -CONFIG_NET_VENDOR_XIRCOM=y -CONFIG_NEW_LEDS=y -# CONFIG_NFC is not set -# CONFIG_NFC_DEVICES is not set -# CONFIG_NFSD is not set -# CONFIG_NFSD_DEPRECATED is not set -# CONFIG_NFSD_V2_ACL is not set -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -# CONFIG_NFS_ACL_SUPPORT is not set -CONFIG_NFS_COMMON=y -# CONFIG_NFS_FS is not set -# CONFIG_NFS_FSCACHE is not set -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_V4_1 is not set -# CONFIG_NFTL is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NF_CONNTRACK_AMANDA is not set -# CONFIG_NF_CONNTRACK_EVENTS is not set -# CONFIG_NF_CONNTRACK_FTP is not set -# CONFIG_NF_CONNTRACK_H323 is not set -# CONFIG_NF_CONNTRACK_IPV4 is not set -# CONFIG_NF_CONNTRACK_IPV6 is not set -# CONFIG_NF_CONNTRACK_IRC is not set -# CONFIG_NF_CONNTRACK_MARK is not set -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -# CONFIG_NF_CONNTRACK_PPTP is not set -CONFIG_NF_CONNTRACK_PROCFS=y -# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set -# CONFIG_NF_CONNTRACK_RTSP is not set -# CONFIG_NF_CONNTRACK_SANE is not set -# CONFIG_NF_CONNTRACK_SIP is not set -# CONFIG_NF_CONNTRACK_SNMP is not set -# CONFIG_NF_CONNTRACK_TFTP is not set -# CONFIG_NF_CONNTRACK_TIMESTAMP is not set -# CONFIG_NF_CONNTRACK_ZONES is not set -# CONFIG_NF_CT_NETLINK is not set -# CONFIG_NF_CT_PROTO_DCCP is not set -# CONFIG_NF_CT_PROTO_GRE is not set -# CONFIG_NF_CT_PROTO_SCTP is not set -# CONFIG_NF_CT_PROTO_UDPLITE is not set -# CONFIG_NF_DEFRAG_IPV4 is not set -# CONFIG_NF_NAT is not set -# CONFIG_NF_NAT_AMANDA is not set -# CONFIG_NF_NAT_FTP is not set -# CONFIG_NF_NAT_H323 is not set -# CONFIG_NF_NAT_IRC is not set -# CONFIG_NF_NAT_NEEDED is not set -# CONFIG_NF_NAT_PPTP is not set -# CONFIG_NF_NAT_PROTO_GRE is not set -# CONFIG_NF_NAT_RTSP is not set -# CONFIG_NF_NAT_SIP is not set -# CONFIG_NF_NAT_SNMP_BASIC is not set -# CONFIG_NF_NAT_TFTP is not set -# CONFIG_NI52 is not set -# CONFIG_NI65 is not set -# CONFIG_NILFS2_FS is not set -# CONFIG_NIU is not set -CONFIG_NLATTR=y -# CONFIG_NLM_XLP_BOARD is not set -# CONFIG_NLM_XLR_BOARD is not set -# CONFIG_NLS is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set -# CONFIG_NOP_USB_XCEIV is not set -# CONFIG_NORTEL_HERMES is not set -# CONFIG_NOZOMI is not set -# CONFIG_NO_BOOTMEM is not set -# CONFIG_NO_HZ is not set -# CONFIG_NO_IOPORT is not set -# CONFIG_NS83820 is not set -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_FS is not set -# CONFIG_NTFS_RW is not set -# CONFIG_NTP_PPS is not set -# CONFIG_NVRAM is not set -# CONFIG_NV_TCO is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -# CONFIG_N_GSM is not set -# CONFIG_OABI_COMPAT is not set -# CONFIG_OBS600 is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_OCF_BENCH is not set -# CONFIG_OCF_C7108 is not set -# CONFIG_OCF_CRYPTOCTEON is not set -# CONFIG_OCF_EP80579 is not set -# CONFIG_OCF_HIFN is not set -# CONFIG_OCF_HIFNHIPP is not set -# CONFIG_OCF_IXP4XX is not set -# CONFIG_OCF_KIRKWOOD is not set -# CONFIG_OCF_OCF is not set -# CONFIG_OCF_OCFNULL is not set -# CONFIG_OCF_SAFE is not set -# CONFIG_OCF_TALITOS is not set -# CONFIG_OCF_UBSEC_SSB is not set -# CONFIG_OC_ETM is not set -# CONFIG_OF_SELFTEST is not set -# CONFIG_OMFS_FS is not set -# CONFIG_OPENVSWITCH is not set -# CONFIG_ORION_WATCHDOG is not set -# CONFIG_OSF_PARTITION is not set -CONFIG_OVERLAYFS_FS=y -# CONFIG_P54_COMMON is not set -CONFIG_PACKET=y -# CONFIG_PAGE_POISONING is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_32KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PANEL is not set -# CONFIG_PANTHERLORD_FF is not set -# CONFIG_PARPORT is not set -# CONFIG_PARPORT_1284 is not set -# CONFIG_PARPORT_AX88796 is not set -# CONFIG_PARPORT_PC is not set -CONFIG_PARTITION_ADVANCED=y -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARASAN_CF is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_ATP867X is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CS5535 is not set -# CONFIG_PATA_CS5536 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_ISAPNP is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_LEGACY is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PCMCIA is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_QDI is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RDC is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SCH is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_TOSHIBA is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_WINBOND_VLB is not set -# CONFIG_PC300TOO is not set -# CONFIG_PCCARD is not set -# CONFIG_PCH_GBE is not set -# CONFIG_PCH_PHUB is not set -# CONFIG_PCI200SYN is not set -# CONFIG_PCIEAER_INJECT is not set -# CONFIG_PCIEASPM is not set -# CONFIG_PCIE_ECRC is not set -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_PCI_ATMEL is not set -# CONFIG_PCI_CNB20LE_QUIRK is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set -# CONFIG_PCI_HERMES is not set -# CONFIG_PCI_IOV is not set -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_PASID is not set -# CONFIG_PCI_PRI is not set -CONFIG_PCI_QUIRKS=y -# CONFIG_PCI_STUB is not set -CONFIG_PCI_SYSCALL=y -# CONFIG_PCMCIA is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_ATMEL is not set -# CONFIG_PCMCIA_AXNET is not set -# CONFIG_PCMCIA_DEBUG is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_FMVJ18X is not set -# CONFIG_PCMCIA_HERMES is not set -# CONFIG_PCMCIA_LOAD_CIS is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_PCNET is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_RAYCS is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_SPECTRUM is not set -# CONFIG_PCMCIA_SYM53C500 is not set -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_XIRCOM is not set -# CONFIG_PCNET32 is not set -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_PD6729 is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_PERF_COUNTERS is not set -# CONFIG_PERF_EVENTS is not set -# CONFIG_PHANTOM is not set -# CONFIG_PHONE is not set -# CONFIG_PHONET is not set -# CONFIG_PHYLIB is not set -# CONFIG_PHYS_ADDR_T_64BIT is not set -# CONFIG_PID_NS is not set -# CONFIG_PINCTRL is not set -# CONFIG_PLAT_SPEAR is not set -# CONFIG_PLIP is not set -# CONFIG_PLX_HERMES is not set -# CONFIG_PM is not set -# CONFIG_PMBUS is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PMIC_ADP5520 is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_PM_DEVFREQ is not set -# CONFIG_PM_RUNTIME is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_POHMELFS is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_POWERTV is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PPC4xx_GPIO is not set -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_256K_PAGES is not set -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_64K_PAGES is not set -# CONFIG_PPC_DISABLE_WERROR is not set -# CONFIG_PPC_EMULATED_STATS is not set -# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set -# CONFIG_PPP is not set -# CONFIG_PPPOATM is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_PPP_ASYNC is not set -# CONFIG_PPP_BSDCOMP is not set -# CONFIG_PPP_DEFLATE is not set -CONFIG_PPP_FILTER=y -# CONFIG_PPP_MPPE is not set -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_SYNC_TTY is not set -# CONFIG_PPS is not set -# CONFIG_PPS_CLIENT_GPIO is not set -# CONFIG_PPS_CLIENT_KTIMER is not set -# CONFIG_PPS_CLIENT_LDISC is not set -# CONFIG_PPS_CLIENT_PARPORT is not set -# CONFIG_PPS_DEBUG is not set -# CONFIG_PPTP is not set -# CONFIG_PREEMPT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_PRINTK=y -# CONFIG_PRINTK_TIME is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_PRISM2_USB is not set -# CONFIG_PRISM54 is not set -# CONFIG_PROBE_INITRD_HEADER is not set -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_PROC_SYSCTL=y -# CONFIG_PROFILE_ALL_BRANCHES is not set -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILING is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_PROVE_RCU is not set -# CONFIG_PSB6970_PHY is not set -# CONFIG_PSTORE is not set -# CONFIG_PTP_1588_CLOCK_IXP46X is not set -# CONFIG_QLA3XXX is not set -# CONFIG_QLCNIC is not set -# CONFIG_QLGE is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_QUOTA is not set -# CONFIG_QUOTACTL is not set -# CONFIG_QUOTA_DEBUG is not set -# CONFIG_R3964 is not set -# CONFIG_R6040 is not set -# CONFIG_R8169 is not set -# CONFIG_R8187SE is not set -# CONFIG_R8712U is not set -# CONFIG_RADIO_ADAPTERS is not set -# CONFIG_RADIO_AZTECH is not set -# CONFIG_RADIO_CADET is not set -# CONFIG_RADIO_GEMTEK is not set -# CONFIG_RADIO_MAXIRADIO is not set -# CONFIG_RADIO_RTRACK is not set -# CONFIG_RADIO_RTRACK2 is not set -# CONFIG_RADIO_SF16FMI is not set -# CONFIG_RADIO_SF16FMR2 is not set -# CONFIG_RADIO_TERRATEC is not set -# CONFIG_RADIO_TRUST is not set -# CONFIG_RADIO_TYPHOON is not set -# CONFIG_RADIO_ZOLTRIX is not set -# CONFIG_RAID_ATTRS is not set -# CONFIG_RAMOOPS is not set -# CONFIG_RAPIDIO is not set -# CONFIG_RAR_REGISTER is not set -# CONFIG_RAW_DRIVER is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -CONFIG_RCU_FANOUT=32 -# CONFIG_RCU_FANOUT_EXACT is not set -# CONFIG_RCU_FAST_NO_HZ is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_TRACE is not set -# CONFIG_RC_CORE is not set -# CONFIG_RC_MAP is not set -# CONFIG_RDS is not set -# CONFIG_RD_BZIP2 is not set -# CONFIG_RD_GZIP is not set -# CONFIG_RD_LZMA is not set -# CONFIG_RD_LZO is not set -# CONFIG_RD_XZ is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_REDWOOD is not set -# CONFIG_REGMAP is not set -# CONFIG_REGMAP_I2C is not set -# CONFIG_REGMAP_SPI is not set -# CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_GPIO is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_REISERFS_FS_POSIX_ACL is not set -# CONFIG_REISERFS_FS_SECURITY is not set -# CONFIG_REISERFS_FS_XATTR is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_RELAY is not set -# CONFIG_RFD_FTL is not set -# CONFIG_RFKILL is not set -# CONFIG_RFKILL_INPUT is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_ROSE is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RT2X00 is not set -# CONFIG_RTC_CLASS is not set -# CONFIG_RTC_DEBUG is not set -# CONFIG_RTC_DRV_AU1XXX is not set -# CONFIG_RTC_DRV_BQ32K is not set -# CONFIG_RTC_DRV_BQ4802 is not set -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_DS3232 is not set -# CONFIG_RTC_DRV_DS3234 is not set -# CONFIG_RTC_DRV_EM3027 is not set -# CONFIG_RTC_DRV_EP93XX is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_GENERIC is not set -# CONFIG_RTC_DRV_ISL12022 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_M41T93 is not set -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_MPC5121 is not set -# CONFIG_RTC_DRV_MSM6242 is not set -# CONFIG_RTC_DRV_PCF2123 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_PL030 is not set -# CONFIG_RTC_DRV_PL031 is not set -# CONFIG_RTC_DRV_PS3 is not set -# CONFIG_RTC_DRV_PT7C4338 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RP5C01 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_RTC7301 is not set -# CONFIG_RTC_DRV_RV3029C2 is not set -# CONFIG_RTC_DRV_RX8025 is not set -# CONFIG_RTC_DRV_RX8581 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_V3020 is not set -# CONFIG_RTC_DRV_X1205 is not set -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_LIB=y -# CONFIG_RTL8180 is not set -# CONFIG_RTL8187 is not set -# CONFIG_RTL8192E is not set -# CONFIG_RTL8192U is not set -# CONFIG_RTL8306_PHY is not set -# CONFIG_RTL8366RB_PHY is not set -# CONFIG_RTL8366S_PHY is not set -# CONFIG_RTL8366_SMI is not set -# CONFIG_RTL8366_SMI_DEBUG_FS is not set -# CONFIG_RTL8367B_PHY is not set -# CONFIG_RTL8367_PHY is not set -# CONFIG_RTLLIB is not set -# CONFIG_RTS5139 is not set -# CONFIG_RTS_PSTOR is not set -CONFIG_RT_MUTEXES=y -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_RUNTIME_DEBUG is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_S2IO is not set -# CONFIG_SAMPLES is not set -# CONFIG_SAMSUNG_LAPTOP is not set -# CONFIG_SATA_ACARD_AHCI is not set -# CONFIG_SATA_AHCI is not set -# CONFIG_SATA_AHCI_PLATFORM is not set -# CONFIG_SATA_DWC is not set -# CONFIG_SATA_FSL is not set -# CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_SATA_PMP is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_SVW is not set -# CONFIG_SATA_SX4 is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SBC_FITPC2_WATCHDOG is not set -# CONFIG_SBE_2T3E3 is not set -# CONFIG_SC92031 is not set -# CONFIG_SCC is not set -# CONFIG_SCHEDSTATS is not set -# CONFIG_SCHED_AUTOGROUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHED_MC is not set -CONFIG_SCHED_OMIT_FRAME_POINTER=y -# CONFIG_SCHED_SMT is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_3W_SAS is not set -# CONFIG_SCSI_7000FASST is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_SCSI_BFA_FC is not set -# CONFIG_SCSI_BNX2X_FCOE is not set -# CONFIG_SCSI_BNX2_ISCSI is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_SCSI_CXGB4_ISCSI is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_DH is not set -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_HPSA is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_ISCI is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_LOGGING is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -# CONFIG_SCSI_LPFC is not set -CONFIG_SCSI_MOD=y -# CONFIG_SCSI_MPT2SAS is not set -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_MVSAS_DEBUG is not set -# CONFIG_SCSI_MVUMI is not set -# CONFIG_SCSI_NCR53C406A is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_OSD_INITIATOR is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PM8001 is not set -# CONFIG_SCSI_PMCRAID is not set -CONFIG_SCSI_PROC_FS=y -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_SRP_ATTRS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_ULTRASTOR is not set -# CONFIG_SDIO_UART is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_DMESG_RESTRICT is not set -# CONFIG_SEEQ8005 is not set -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ABITUGURU3 is not set -# CONFIG_SENSORS_ACPI_POWER is not set -# CONFIG_SENSORS_AD7314 is not set -# CONFIG_SENSORS_AD7414 is not set -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADCXX is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADS1015 is not set -# CONFIG_SENSORS_ADS7828 is not set -# CONFIG_SENSORS_ADS7871 is not set -# CONFIG_SENSORS_ADT7411 is not set -# CONFIG_SENSORS_ADT7462 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7475 is not set -# CONFIG_SENSORS_AMC6821 is not set -# CONFIG_SENSORS_APDS990X is not set -# CONFIG_SENSORS_APPLESMC is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ASC7621 is not set -# CONFIG_SENSORS_ATK0110 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_BH1770 is not set -# CONFIG_SENSORS_BH1780 is not set -# CONFIG_SENSORS_CORETEMP is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_DS620 is not set -# CONFIG_SENSORS_EMC1403 is not set -# CONFIG_SENSORS_EMC2103 is not set -# CONFIG_SENSORS_EMC6W201 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_FAM15H_POWER is not set -# CONFIG_SENSORS_FSCHMD is not set -# CONFIG_SENSORS_G760A is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_GPIO_FAN is not set -# CONFIG_SENSORS_GSC is not set -# CONFIG_SENSORS_HDAPS is not set -# CONFIG_SENSORS_I5K_AMB is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_JC42 is not set -# CONFIG_SENSORS_K10TEMP is not set -# CONFIG_SENSORS_K8TEMP is not set -# CONFIG_SENSORS_LINEAGE is not set -# CONFIG_SENSORS_LIS3LV02D is not set -# CONFIG_SENSORS_LIS3_I2C is not set -# CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM70 is not set -# CONFIG_SENSORS_LM73 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_LM95241 is not set -# CONFIG_SENSORS_LM95245 is not set -# CONFIG_SENSORS_LTC4151 is not set -# CONFIG_SENSORS_LTC4215 is not set -# CONFIG_SENSORS_LTC4245 is not set -# CONFIG_SENSORS_LTC4261 is not set -# CONFIG_SENSORS_MAX1111 is not set -# CONFIG_SENSORS_MAX16065 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX1668 is not set -# CONFIG_SENSORS_MAX6639 is not set -# CONFIG_SENSORS_MAX6642 is not set -# CONFIG_SENSORS_MAX6650 is not set -# CONFIG_SENSORS_NTC_THERMISTOR is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_SCH5627 is not set -# CONFIG_SENSORS_SCH5636 is not set -# CONFIG_SENSORS_SCH56XX_COMMON is not set -# CONFIG_SENSORS_SHT15 is not set -# CONFIG_SENSORS_SHT21 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMM665 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_TMP102 is not set -# CONFIG_SENSORS_TMP401 is not set -# CONFIG_SENSORS_TMP421 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VIA_CPUTEMP is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83795 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_ACCENT is not set -# CONFIG_SERIAL_8250_BOCA is not set -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_CS is not set -# CONFIG_SERIAL_8250_DW is not set -# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SERIAL_8250_FOURPORT is not set -# CONFIG_SERIAL_8250_HUB6 is not set -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_PCI is not set -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -# CONFIG_SERIAL_ALTERA_JTAGUART is not set -# CONFIG_SERIAL_ALTERA_UART is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set -# CONFIG_SERIAL_IFX6X60 is not set -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_MAX3100 is not set -# CONFIG_SERIAL_MAX3107 is not set -# CONFIG_SERIAL_MFD_HSU is not set -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set -# CONFIG_SERIAL_PCH_UART is not set -# CONFIG_SERIAL_TIMBERDALE is not set -# CONFIG_SERIAL_UARTLITE is not set -# CONFIG_SERIAL_XILINX_PS_UART is not set -# CONFIG_SERIO is not set -# CONFIG_SERIO_ALTERA_PS2 is not set -# CONFIG_SERIO_AMBAKMI is not set -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_PS2MULT is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SFC is not set -# CONFIG_SFI is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SGI_PARTITION is not set -CONFIG_SHMEM=y -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIGMA is not set -CONFIG_SIGNALFD=y -# CONFIG_SIMPLE_GPIO is not set -# CONFIG_SIS190 is not set -# CONFIG_SIS900 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SKY2_DEBUG is not set -CONFIG_SLAB=y -CONFIG_SLABINFO=y -# CONFIG_SLHC is not set -# CONFIG_SLICOSS is not set -# CONFIG_SLIP is not set -# CONFIG_SLOB is not set -# CONFIG_SLUB is not set -# CONFIG_SLUB_DEBUG is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_SMARTJOYPLUS_FF is not set -# CONFIG_SMC911X is not set -# CONFIG_SMC9194 is not set -# CONFIG_SMC91X is not set -# CONFIG_SMP is not set -# CONFIG_SMSC911X is not set -# CONFIG_SMSC9420 is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_SM_FTL is not set -# CONFIG_SND is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -# CONFIG_SND_AD1816A is not set -# CONFIG_SND_AD1848 is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ADLIB is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ALOOP is not set -# CONFIG_SND_ALS100 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ARM is not set -# CONFIG_SND_ASIHPI is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_ATMEL_AC97C is not set -# CONFIG_SND_ATMEL_SOC is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT2320 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMI8330 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_CS4231 is not set -# CONFIG_SND_CS4236 is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_CS5535AUDIO is not set -# CONFIG_SND_CTXFI is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1688 is not set -# CONFIG_SND_ES18XX is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FIREWIRE is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_GUSCLASSIC is not set -# CONFIG_SND_GUSEXTREME is not set -# CONFIG_SND_GUSMAX is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_HWDEP is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_INDIGODJX is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGOIOX is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_INTERWAVE is not set -# CONFIG_SND_INTERWAVE_STB is not set -# CONFIG_SND_ISA is not set -# CONFIG_SND_KIRKWOOD_SOC is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_LOLA is not set -# CONFIG_SND_LX6464ES is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_MIPS is not set -# CONFIG_SND_MIRO is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MPC52xx_SOC_EFIKA is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_MTS64 is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_OPL3SA2 is not set -# CONFIG_SND_OPTI92X_AD1848 is not set -# CONFIG_SND_OPTI92X_CS4231 is not set -# CONFIG_SND_OPTI93X is not set -CONFIG_SND_OSSEMUL=y -# CONFIG_SND_OXYGEN is not set -CONFIG_SND_PCI=y -# CONFIG_SND_PCM is not set -# CONFIG_SND_PCMCIA is not set -# CONFIG_SND_PCM_OSS is not set -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_PDAUDIOCF is not set -# CONFIG_SND_PORTMAN2X4 is not set -# CONFIG_SND_PPC is not set -# CONFIG_SND_RAWMIDI is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_RTCTIMER is not set -# CONFIG_SND_SB16 is not set -# CONFIG_SND_SB8 is not set -# CONFIG_SND_SBAWE is not set -# CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_SIS7019 is not set -# CONFIG_SND_SOC is not set -# CONFIG_SND_SOC_AU1XAUDIO is not set -# CONFIG_SND_SOC_AU1XPSC is not set -# CONFIG_SND_SOC_CACHE_LZO is not set -# CONFIG_SND_SOC_MPC5200_AC97 is not set -# CONFIG_SND_SOC_MPC5200_I2S is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_SSCAPE is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_TIMER is not set -# CONFIG_SND_TRIDENT is not set -CONFIG_SND_USB=y -# CONFIG_SND_USB_6FIRE is not set -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_USB_UA101 is not set -# CONFIG_SND_USB_US122L is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_VERBOSE_PRINTK is not set -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_WAVEFRONT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SNI_RM is not set -# CONFIG_SOC_CAMERA is not set -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_SOLO6X10 is not set -# CONFIG_SONYPI is not set -# CONFIG_SONY_LAPTOP is not set -# CONFIG_SOUND is not set -# CONFIG_SOUND_PRIME is not set -# CONFIG_SP5100_TCO is not set -# CONFIG_SPARSEMEM_MANUAL is not set -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -# CONFIG_SPARSE_IRQ is not set -# CONFIG_SPARSE_RCU_POINTER is not set -# CONFIG_SPEAKUP is not set -# CONFIG_SPI is not set -# CONFIG_SPINLOCK_TEST is not set -# CONFIG_SPI_ALTERA is not set -# CONFIG_SPI_AU1550 is not set -# CONFIG_SPI_BITBANG is not set -# CONFIG_SPI_BUTTERFLY is not set -# CONFIG_SPI_DEBUG is not set -# CONFIG_SPI_DESIGNWARE is not set -# CONFIG_SPI_FSL_ESPI is not set -# CONFIG_SPI_FSL_SPI is not set -# CONFIG_SPI_GPIO is not set -# CONFIG_SPI_GPIO_OLD is not set -# CONFIG_SPI_LM70_LLP is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_SPI_MPC52xx is not set -# CONFIG_SPI_MPC52xx_PSC is not set -# CONFIG_SPI_OC_TINY is not set -# CONFIG_SPI_ORION is not set -# CONFIG_SPI_PL022 is not set -# CONFIG_SPI_PPC4xx is not set -# CONFIG_SPI_PXA2XX is not set -# CONFIG_SPI_PXA2XX_PCI is not set -# CONFIG_SPI_RAMIPS is not set -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TLE62X0 is not set -# CONFIG_SPI_TOPCLIFF_PCH is not set -# CONFIG_SPI_XILINX is not set -# CONFIG_SPI_XWAY is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_SQUASHFS=y -# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_SQUASHFS_LZO is not set -# CONFIG_SQUASHFS_XATTR is not set -CONFIG_SQUASHFS_XZ=y -# CONFIG_SQUASHFS_ZLIB is not set -# CONFIG_SSB is not set -# CONFIG_SSB_DEBUG is not set -# CONFIG_SSB_DRIVER_GPIO is not set -# CONFIG_SSB_PCMCIAHOST is not set -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB_SDIOHOST is not set -# CONFIG_SSB_SILENT is not set -# CONFIG_SSFDC is not set -CONFIG_STACKTRACE_SUPPORT=y -# CONFIG_STACK_TRACER is not set -CONFIG_STAGING=y -# CONFIG_STAGING_MEDIA is not set -CONFIG_STANDALONE=y -CONFIG_STDBINUTILS=y -# CONFIG_STE10XP is not set -# CONFIG_STMMAC_ETH is not set -CONFIG_STP=y -# CONFIG_STRICT_DEVMEM is not set -CONFIG_STRIP_ASM_SYMS=y -# CONFIG_STUB_POULSBO is not set -# CONFIG_SUNDANCE is not set -# CONFIG_SUNGEM is not set -# CONFIG_SUNRPC is not set -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_SUSPEND is not set -CONFIG_SWAP=y -# CONFIG_SWCONFIG is not set -# CONFIG_SWCONFIG_LEDS is not set -# CONFIG_SYNCLINK_CS is not set -CONFIG_SYN_COOKIES=y -CONFIG_SYSCTL=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_SYSFS=y -# CONFIG_SYSFS_DEPRECATED is not set -# CONFIG_SYSFS_DEPRECATED_V2 is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_SYSV_FS is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_TARGET_CORE is not set -# CONFIG_TASKSTATS is not set -# CONFIG_TC35815 is not set -# CONFIG_TCG_TPM is not set -# CONFIG_TCIC is not set -CONFIG_TCP_CONG_ADVANCED=y -# CONFIG_TCP_CONG_BIC is not set -CONFIG_TCP_CONG_CUBIC=y -# CONFIG_TCP_CONG_HSTCP is not set -# CONFIG_TCP_CONG_HTCP is not set -# CONFIG_TCP_CONG_HYBLA is not set -# CONFIG_TCP_CONG_ILLINOIS is not set -# CONFIG_TCP_CONG_LP is not set -# CONFIG_TCP_CONG_SCALABLE is not set -# CONFIG_TCP_CONG_VEGAS is not set -# CONFIG_TCP_CONG_VENO is not set -# CONFIG_TCP_CONG_WESTWOOD is not set -# CONFIG_TCP_CONG_YEAH is not set -# CONFIG_TCP_MD5SIG is not set -# CONFIG_TEHUTI is not set -# CONFIG_TEST_KSTRTOX is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_TEST_POWER is not set -CONFIG_TEXTSEARCH=y -# CONFIG_TEXTSEARCH_BM is not set -# CONFIG_TEXTSEARCH_FSM is not set -# CONFIG_TEXTSEARCH_KMP is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_THRUSTMASTER_FF is not set -CONFIG_TICK_ONESHOT=y -# CONFIG_TIFM_CORE is not set -# CONFIG_TIGON3 is not set -# CONFIG_TIMB_DMA is not set -CONFIG_TIMERFD=y -# CONFIG_TIMER_STATS is not set -CONFIG_TINY_RCU=y -# CONFIG_TIPC is not set -# CONFIG_TI_DAC7512 is not set -# CONFIG_TI_ST is not set -# CONFIG_TLAN is not set -# CONFIG_TMD_HERMES is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -CONFIG_TMPFS_XATTR=y -# CONFIG_TOUCHSCREEN_AD7877 is not set -# CONFIG_TOUCHSCREEN_AD7879 is not set -# CONFIG_TOUCHSCREEN_AD7879_I2C is not set -# CONFIG_TOUCHSCREEN_AD7879_SPI is not set -# CONFIG_TOUCHSCREEN_ADS7846 is not set -# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set -# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set -# CONFIG_TOUCHSCREEN_EETI is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_INEXIO is not set -# CONFIG_TOUCHSCREEN_MCS5000 is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_S3C2410 is not set -# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set -# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_TPS6507X is not set -# CONFIG_TOUCHSCREEN_TSC2007 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -# CONFIG_TOUCHSCREEN_W90X900 is not set -# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set -# CONFIG_TOUCHSCREEN_WM97XX is not set -# CONFIG_TPS6105X is not set -# CONFIG_TPS65010 is not set -# CONFIG_TPS6507X is not set -# CONFIG_TR is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_TRACE_SINK is not set -CONFIG_TRACING_SUPPORT=y -CONFIG_TRAD_SIGNALS=y -# CONFIG_TRANZPORT is not set -# CONFIG_TREE_PREEMPT_RCU is not set -# CONFIG_TREE_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_TTY_PRINTK is not set -# CONFIG_TUN is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_TYPHOON is not set -# CONFIG_UACCESS_WITH_MEMCPY is not set -# CONFIG_UCB1400_CORE is not set -# CONFIG_UDF_FS is not set -CONFIG_UDF_NLS=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_UFS_FS is not set -# CONFIG_UIO is not set -# CONFIG_ULTRA is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_UNIX=y -CONFIG_UNIX98_PTYS=y -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_UNIX_DIAG is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_USB is not set -# CONFIG_USBIP_CORE is not set -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_USB_ACM is not set -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_ALI_M5632=y -# CONFIG_USB_AMD5536UDC is not set -CONFIG_USB_AN2720=y -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set -# CONFIG_USB_APPLEDISPLAY is not set -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARMLINUX=y -# CONFIG_USB_ATM is not set -CONFIG_USB_BELKIN=y -# CONFIG_USB_C67X00_HCD is not set -# CONFIG_USB_CATC is not set -# CONFIG_USB_CDC_COMPOSITE is not set -# CONFIG_USB_CXACRU is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_DEBUG is not set -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -# CONFIG_USB_DSBR is not set -# CONFIG_USB_DUMMY_HCD is not set -# CONFIG_USB_DWC3 is not set -# CONFIG_USB_DWC_OTG_LPM is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_EG20T is not set -# CONFIG_USB_EHCI_HCD_PLATFORM is not set -# CONFIG_USB_EHCI_HCD_PPC_OF is not set -# CONFIG_USB_EHCI_MV is not set -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_ENESTORAGE is not set -# CONFIG_USB_EPSON2888 is not set -# CONFIG_USB_ET61X251 is not set -CONFIG_USB_EZUSB=y -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_FSL_USB2 is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_FUNCTIONFS is not set -# CONFIG_USB_FUSB300 is not set -# CONFIG_USB_GADGET is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 -CONFIG_USB_GADGET_VBUS_DRAW=2 -# CONFIG_USB_GL860 is not set -# CONFIG_USB_GOKU is not set -# CONFIG_USB_GPIO_VBUS is not set -# CONFIG_USB_GSPCA is not set -# CONFIG_USB_GSPCA_BENQ is not set -# CONFIG_USB_GSPCA_CONEX is not set -# CONFIG_USB_GSPCA_CPIA1 is not set -# CONFIG_USB_GSPCA_ETOMS is not set -# CONFIG_USB_GSPCA_FINEPIX is not set -# CONFIG_USB_GSPCA_JEILINJ is not set -# CONFIG_USB_GSPCA_JL2005BCD is not set -# CONFIG_USB_GSPCA_KINECT is not set -# CONFIG_USB_GSPCA_KONICA is not set -# CONFIG_USB_GSPCA_MARS is not set -# CONFIG_USB_GSPCA_MR97310A is not set -# CONFIG_USB_GSPCA_NW80X is not set -# CONFIG_USB_GSPCA_OV519 is not set -# CONFIG_USB_GSPCA_OV534 is not set -# CONFIG_USB_GSPCA_OV534_9 is not set -# CONFIG_USB_GSPCA_PAC207 is not set -# CONFIG_USB_GSPCA_PAC7302 is not set -# CONFIG_USB_GSPCA_PAC7311 is not set -# CONFIG_USB_GSPCA_SE401 is not set -# CONFIG_USB_GSPCA_SN9C2028 is not set -# CONFIG_USB_GSPCA_SN9C20X is not set -# CONFIG_USB_GSPCA_SONIXB is not set -# CONFIG_USB_GSPCA_SONIXJ is not set -# CONFIG_USB_GSPCA_SPCA1528 is not set -# CONFIG_USB_GSPCA_SPCA500 is not set -# CONFIG_USB_GSPCA_SPCA501 is not set -# CONFIG_USB_GSPCA_SPCA505 is not set -# CONFIG_USB_GSPCA_SPCA506 is not set -# CONFIG_USB_GSPCA_SPCA508 is not set -# CONFIG_USB_GSPCA_SPCA561 is not set -# CONFIG_USB_GSPCA_SQ905 is not set -# CONFIG_USB_GSPCA_SQ905C is not set -# CONFIG_USB_GSPCA_SQ930X is not set -# CONFIG_USB_GSPCA_STK014 is not set -# CONFIG_USB_GSPCA_STV0680 is not set -# CONFIG_USB_GSPCA_SUNPLUS is not set -# CONFIG_USB_GSPCA_T613 is not set -# CONFIG_USB_GSPCA_TOPRO is not set -# CONFIG_USB_GSPCA_TV8532 is not set -# CONFIG_USB_GSPCA_VC032X is not set -# CONFIG_USB_GSPCA_VICAM is not set -# CONFIG_USB_GSPCA_XIRLINK_CIT is not set -# CONFIG_USB_GSPCA_ZC3XX is not set -# CONFIG_USB_G_ACM_MS is not set -# CONFIG_USB_G_DBGP is not set -# CONFIG_USB_G_HID is not set -# CONFIG_USB_G_MULTI is not set -# CONFIG_USB_G_NCM is not set -# CONFIG_USB_G_NOKIA is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_G_WEBCAM is not set -# CONFIG_USB_HID is not set -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_HSO is not set -# CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_IPHETH is not set -# CONFIG_USB_IP_COMMON is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1362_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_KBD is not set -# CONFIG_USB_KC2190 is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LIBUSUAL is not set -# CONFIG_USB_M5602 is not set -# CONFIG_USB_M66592 is not set -# CONFIG_USB_MASS_STORAGE is not set -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_MON is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_MUSB_HDRC is not set -# CONFIG_USB_MV_UDC is not set -# CONFIG_USB_NET2272 is not set -# CONFIG_USB_NET2280 is not set -# CONFIG_USB_NET_AX8817X is not set -# CONFIG_USB_NET_CDCETHER is not set -# CONFIG_USB_NET_CDC_EEM is not set -# CONFIG_USB_NET_CDC_NCM is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -# CONFIG_USB_NET_CX82310_ETH is not set -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_GL620A is not set -# CONFIG_USB_NET_INT51X1 is not set -# CONFIG_USB_NET_KALMIA is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_NET1080 is not set -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_RNDIS_WLAN is not set -# CONFIG_USB_NET_SMSC75XX is not set -# CONFIG_USB_NET_SMSC95XX is not set -# CONFIG_USB_NET_ZAURUS is not set -# CONFIG_USB_OHCI_HCD is not set -# CONFIG_USB_OHCI_HCD_PCI is not set -# CONFIG_USB_OHCI_HCD_PLATFORM is not set -# CONFIG_USB_OHCI_HCD_PPC_OF is not set -# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set -# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set -# CONFIG_USB_OHCI_HCD_PPC_SOC is not set -# CONFIG_USB_OHCI_HCD_SSB is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_PWC_INPUT_EVDEV is not set -# CONFIG_USB_PXA27X is not set -# CONFIG_USB_R8A66597 is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_RENESAS_USBHS is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_S2255 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_CH341 is not set -# CONFIG_USB_SERIAL_CP210X is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_CYPRESS_M8 is not set -# CONFIG_USB_SERIAL_DEBUG is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -# CONFIG_USB_SERIAL_FUNSOFT is not set -# CONFIG_USB_SERIAL_GARMIN is not set -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_HP4X is not set -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IPW is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_IUU is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_MOTOROLA is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -# CONFIG_USB_SERIAL_OMNINET is not set -# CONFIG_USB_SERIAL_OPTICON is not set -# CONFIG_USB_SERIAL_OPTION is not set -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_QCAUX is not set -# CONFIG_USB_SERIAL_QUALCOMM is not set -# CONFIG_USB_SERIAL_QUATECH2 is not set -# CONFIG_USB_SERIAL_QUATECH_USB2 is not set -# CONFIG_USB_SERIAL_SAFE is not set -CONFIG_USB_SERIAL_SAFE_PADDED=y -# CONFIG_USB_SERIAL_SIEMENS_MPI is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -# CONFIG_USB_SERIAL_SPCP8X5 is not set -# CONFIG_USB_SERIAL_SSU100 is not set -# CONFIG_USB_SERIAL_SYMBOL is not set -# CONFIG_USB_SERIAL_TI is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_ZIO is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_SIERRA_NET is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_SPEEDTOUCH is not set -# CONFIG_USB_STKWEBCAM is not set -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_ENE_UB6250 is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_REALTEK is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STV06XX is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_SWITCH_FSA9480 is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_TMC is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_UAS is not set -# CONFIG_USB_UEAGLEATM is not set -# CONFIG_USB_ULPI is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_USS720 is not set -# CONFIG_USB_VIDEO_CLASS is not set -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -# CONFIG_USB_VL600 is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set -# CONFIG_USB_XHCI_HCD is not set -# CONFIG_USB_XUSBATM is not set -# CONFIG_USB_YUREX is not set -# CONFIG_USB_ZD1201 is not set -# CONFIG_USB_ZERO is not set -# CONFIG_USB_ZR364XX is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_USE_OF is not set -# CONFIG_UTS_NS is not set -# CONFIG_UWB is not set -# CONFIG_V4L_MEM2MEM_DRIVERS is not set -# CONFIG_VETH is not set -# CONFIG_VFAT_FS is not set -# CONFIG_VGASTATE is not set -# CONFIG_VGA_ARB is not set -# CONFIG_VGA_SWITCHEROO is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_VIDEO_ADV7170 is not set -# CONFIG_VIDEO_ADV7175 is not set -# CONFIG_VIDEO_ADV7180 is not set -# CONFIG_VIDEO_ADV7343 is not set -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_AK881X is not set -# CONFIG_VIDEO_BT819 is not set -# CONFIG_VIDEO_BT848 is not set -# CONFIG_VIDEO_BT856 is not set -# CONFIG_VIDEO_BT866 is not set -# CONFIG_VIDEO_BWQCAM is not set -# CONFIG_VIDEO_CAFE_CCIC is not set -# CONFIG_VIDEO_CAPTURE_DRIVERS is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CQCAM is not set -# CONFIG_VIDEO_CS5345 is not set -# CONFIG_VIDEO_CS53L32A is not set -# CONFIG_VIDEO_CX231XX is not set -# CONFIG_VIDEO_CX2341X is not set -# CONFIG_VIDEO_CX25840 is not set -# CONFIG_VIDEO_CX88 is not set -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_DT3155 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -# CONFIG_VIDEO_GO7007 is not set -# CONFIG_VIDEO_HDPVR is not set -# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set -# CONFIG_VIDEO_HEXIUM_GEMINI is not set -# CONFIG_VIDEO_HEXIUM_ORION is not set -# CONFIG_VIDEO_IR_I2C is not set -# CONFIG_VIDEO_IVTV is not set -# CONFIG_VIDEO_KS0127 is not set -# CONFIG_VIDEO_M52790 is not set -# CONFIG_VIDEO_MEDIA is not set -# CONFIG_VIDEO_MSP3400 is not set -# CONFIG_VIDEO_MT9V011 is not set -# CONFIG_VIDEO_MXB is not set -# CONFIG_VIDEO_NOON010PC30 is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_VIDEO_OV7670 is not set -# CONFIG_VIDEO_PMS is not set -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_SAA6588 is not set -# CONFIG_VIDEO_SAA7110 is not set -# CONFIG_VIDEO_SAA711X is not set -# CONFIG_VIDEO_SAA7127 is not set -# CONFIG_VIDEO_SAA7134 is not set -# CONFIG_VIDEO_SAA717X is not set -# CONFIG_VIDEO_SAA7185 is not set -# CONFIG_VIDEO_SAA7191 is not set -# CONFIG_VIDEO_SH_MOBILE_CEU is not set -# CONFIG_VIDEO_SR030PC30 is not set -# CONFIG_VIDEO_TCM825X is not set -# CONFIG_VIDEO_TDA7432 is not set -# CONFIG_VIDEO_TDA9840 is not set -# CONFIG_VIDEO_TEA6415C is not set -# CONFIG_VIDEO_TEA6420 is not set -# CONFIG_VIDEO_THS7303 is not set -# CONFIG_VIDEO_TIMBERDALE is not set -# CONFIG_VIDEO_TLV320AIC23B is not set -# CONFIG_VIDEO_TM6000 is not set -# CONFIG_VIDEO_TVAUDIO is not set -# CONFIG_VIDEO_TVP514X is not set -# CONFIG_VIDEO_TVP5150 is not set -# CONFIG_VIDEO_TVP7002 is not set -# CONFIG_VIDEO_UPD64031A is not set -# CONFIG_VIDEO_UPD64083 is not set -# CONFIG_VIDEO_USBVISION is not set -# CONFIG_VIDEO_V4L2 is not set -# CONFIG_VIDEO_V4L2_COMMON is not set -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_VP27SMPX is not set -# CONFIG_VIDEO_VPX3220 is not set -# CONFIG_VIDEO_WM8739 is not set -# CONFIG_VIDEO_WM8775 is not set -# CONFIG_VIDEO_ZORAN is not set -# CONFIG_VIRQ_DEBUG is not set -# CONFIG_VIRTIO_BALLOON is not set -# CONFIG_VIRTIO_MMIO is not set -# CONFIG_VIRTIO_PCI is not set -# CONFIG_VIRTUALIZATION is not set -# CONFIG_VIRT_DRIVERS is not set -CONFIG_VIRT_TO_BUS=y -# CONFIG_VITESSE_PHY is not set -CONFIG_VLAN_8021Q=y -# CONFIG_VLAN_8021Q_GVRP is not set -# CONFIG_VME_BUS is not set -# CONFIG_VMSPLIT_1G is not set -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_2G_OPT is not set -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_3G_OPT is not set -# CONFIG_VMWARE_PVSCSI is not set -# CONFIG_VMXNET3 is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_VORTEX is not set -# CONFIG_VT is not set -# CONFIG_VT6655 is not set -# CONFIG_VT6656 is not set -# CONFIG_VXFS_FS is not set -# CONFIG_VXGE is not set -# CONFIG_W1 is not set -# CONFIG_W1_CON is not set -# CONFIG_W1_MASTER_DS1WM is not set -# CONFIG_W1_MASTER_DS2482 is not set -# CONFIG_W1_MASTER_DS2490 is not set -# CONFIG_W1_MASTER_GPIO is not set -# CONFIG_W1_MASTER_MATROX is not set -# CONFIG_W1_SLAVE_BQ27000 is not set -# CONFIG_W1_SLAVE_DS2408 is not set -# CONFIG_W1_SLAVE_DS2423 is not set -# CONFIG_W1_SLAVE_DS2431 is not set -# CONFIG_W1_SLAVE_DS2433 is not set -# CONFIG_W1_SLAVE_DS2760 is not set -# CONFIG_W1_SLAVE_DS2780 is not set -# CONFIG_W1_SLAVE_SMEM is not set -# CONFIG_W1_SLAVE_THERM is not set -# CONFIG_W83627HF_WDT is not set -# CONFIG_W83697HF_WDT is not set -# CONFIG_W83877F_WDT is not set -# CONFIG_W83977F_WDT is not set -# CONFIG_WAN is not set -# CONFIG_WANXL is not set -# CONFIG_WAN_ROUTER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_CORE is not set -# CONFIG_WATCHDOG_NOWAYOUT is not set -# CONFIG_WD80x3 is not set -# CONFIG_WDTPCI is not set -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PRIV=y -CONFIG_WEXT_PROC=y -CONFIG_WEXT_SPY=y -# CONFIG_WIMAX is not set -CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -# CONFIG_WIRELESS_EXT_SYSFS is not set -# CONFIG_WLAGS49_H2 is not set -# CONFIG_WLAGS49_H25 is not set -CONFIG_WLAN=y -# CONFIG_WR_PPMC is not set -# CONFIG_X25 is not set -CONFIG_XFRM=y -# CONFIG_XFRM_IPCOMP is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_USER is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_XFS_FS is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_RT is not set -# CONFIG_XILINX_EMACLITE is not set -# CONFIG_XILINX_LL_TEMAC is not set -# CONFIG_XIP_KERNEL is not set -# CONFIG_XMON is not set -# CONFIG_XVMALLOC is not set -CONFIG_XZ_DEC=y -# CONFIG_XZ_DEC_ARM is not set -# CONFIG_XZ_DEC_ARMTHUMB is not set -# CONFIG_XZ_DEC_BCJ is not set -# CONFIG_XZ_DEC_IA64 is not set -# CONFIG_XZ_DEC_POWERPC is not set -# CONFIG_XZ_DEC_SPARC is not set -# CONFIG_XZ_DEC_TEST is not set -# CONFIG_XZ_DEC_X86 is not set -# CONFIG_YAM is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_YENTA is not set -# CONFIG_YENTA_O2 is not set -# CONFIG_YENTA_RICOH is not set -# CONFIG_YENTA_TI is not set -# CONFIG_YENTA_TOSHIBA is not set -# CONFIG_ZD1211RW is not set -# CONFIG_ZD1211RW_DEBUG is not set -# CONFIG_ZEROPLUS_FF is not set -# CONFIG_ZISOFS is not set -# CONFIG_ZLIB_DEFLATE is not set -# CONFIG_ZLIB_INFLATE is not set -# CONFIG_ZNET is not set -CONFIG_ZONE_DMA=y -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_ZRAM is not set diff --git a/target/linux/generic/patches-3.3/001-ARM-7668-1-fix-memset-related-crashes-caused-by-rece.patch b/target/linux/generic/patches-3.3/001-ARM-7668-1-fix-memset-related-crashes-caused-by-rece.patch deleted file mode 100644 index 07061b0bbd..0000000000 --- a/target/linux/generic/patches-3.3/001-ARM-7668-1-fix-memset-related-crashes-caused-by-rece.patch +++ /dev/null @@ -1,250 +0,0 @@ -From 455bd4c430b0c0a361f38e8658a0d6cb469942b5 Mon Sep 17 00:00:00 2001 -From: Ivan Djelic -Date: Wed, 6 Mar 2013 20:09:27 +0100 -Subject: [PATCH] ARM: 7668/1: fix memset-related crashes caused by recent GCC - (4.7.2) optimizations - -Recent GCC versions (e.g. GCC-4.7.2) perform optimizations based on -assumptions about the implementation of memset and similar functions. -The current ARM optimized memset code does not return the value of -its first argument, as is usually expected from standard implementations. - -For instance in the following function: - -void debug_mutex_lock_common(struct mutex *lock, struct mutex_waiter *waiter) -{ - memset(waiter, MUTEX_DEBUG_INIT, sizeof(*waiter)); - waiter->magic = waiter; - INIT_LIST_HEAD(&waiter->list); -} - -compiled as: - -800554d0 : -800554d0: e92d4008 push {r3, lr} -800554d4: e1a00001 mov r0, r1 -800554d8: e3a02010 mov r2, #16 ; 0x10 -800554dc: e3a01011 mov r1, #17 ; 0x11 -800554e0: eb04426e bl 80165ea0 -800554e4: e1a03000 mov r3, r0 -800554e8: e583000c str r0, [r3, #12] -800554ec: e5830000 str r0, [r3] -800554f0: e5830004 str r0, [r3, #4] -800554f4: e8bd8008 pop {r3, pc} - -GCC assumes memset returns the value of pointer 'waiter' in register r0; causing -register/memory corruptions. - -This patch fixes the return value of the assembly version of memset. -It adds a 'mov' instruction and merges an additional load+store into -existing load/store instructions. -For ease of review, here is a breakdown of the patch into 4 simple steps: - -Step 1 -====== -Perform the following substitutions: -ip -> r8, then -r0 -> ip, -and insert 'mov ip, r0' as the first statement of the function. -At this point, we have a memset() implementation returning the proper result, -but corrupting r8 on some paths (the ones that were using ip). - -Step 2 -====== -Make sure r8 is saved and restored when (! CALGN(1)+0) == 1: - -save r8: -- str lr, [sp, #-4]! -+ stmfd sp!, {r8, lr} - -and restore r8 on both exit paths: -- ldmeqfd sp!, {pc} @ Now <64 bytes to go. -+ ldmeqfd sp!, {r8, pc} @ Now <64 bytes to go. -(...) - tst r2, #16 - stmneia ip!, {r1, r3, r8, lr} -- ldr lr, [sp], #4 -+ ldmfd sp!, {r8, lr} - -Step 3 -====== -Make sure r8 is saved and restored when (! CALGN(1)+0) == 0: - -save r8: -- stmfd sp!, {r4-r7, lr} -+ stmfd sp!, {r4-r8, lr} - -and restore r8 on both exit paths: - bgt 3b -- ldmeqfd sp!, {r4-r7, pc} -+ ldmeqfd sp!, {r4-r8, pc} -(...) - tst r2, #16 - stmneia ip!, {r4-r7} -- ldmfd sp!, {r4-r7, lr} -+ ldmfd sp!, {r4-r8, lr} - -Step 4 -====== -Rewrite register list "r4-r7, r8" as "r4-r8". - -Signed-off-by: Ivan Djelic -Reviewed-by: Nicolas Pitre -Signed-off-by: Dirk Behme -Signed-off-by: Russell King ---- - arch/arm/lib/memset.S | 85 ++++++++++++++++++++++++++------------------------- - 1 file changed, 44 insertions(+), 41 deletions(-) - ---- a/arch/arm/lib/memset.S -+++ b/arch/arm/lib/memset.S -@@ -19,9 +19,9 @@ - 1: subs r2, r2, #4 @ 1 do we have enough - blt 5f @ 1 bytes to align with? - cmp r3, #2 @ 1 -- strltb r1, [r0], #1 @ 1 -- strleb r1, [r0], #1 @ 1 -- strb r1, [r0], #1 @ 1 -+ strltb r1, [ip], #1 @ 1 -+ strleb r1, [ip], #1 @ 1 -+ strb r1, [ip], #1 @ 1 - add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) - /* - * The pointer is now aligned and the length is adjusted. Try doing the -@@ -29,10 +29,14 @@ - */ - - ENTRY(memset) -- ands r3, r0, #3 @ 1 unaligned? -+/* -+ * Preserve the contents of r0 for the return value. -+ */ -+ mov ip, r0 -+ ands r3, ip, #3 @ 1 unaligned? - bne 1b @ 1 - /* -- * we know that the pointer in r0 is aligned to a word boundary. -+ * we know that the pointer in ip is aligned to a word boundary. - */ - orr r1, r1, r1, lsl #8 - orr r1, r1, r1, lsl #16 -@@ -43,29 +47,28 @@ ENTRY(memset) - #if ! CALGN(1)+0 - - /* -- * We need an extra register for this loop - save the return address and -- * use the LR -+ * We need 2 extra registers for this loop - use r8 and the LR - */ -- str lr, [sp, #-4]! -- mov ip, r1 -+ stmfd sp!, {r8, lr} -+ mov r8, r1 - mov lr, r1 - - 2: subs r2, r2, #64 -- stmgeia r0!, {r1, r3, ip, lr} @ 64 bytes at a time. -- stmgeia r0!, {r1, r3, ip, lr} -- stmgeia r0!, {r1, r3, ip, lr} -- stmgeia r0!, {r1, r3, ip, lr} -+ stmgeia ip!, {r1, r3, r8, lr} @ 64 bytes at a time. -+ stmgeia ip!, {r1, r3, r8, lr} -+ stmgeia ip!, {r1, r3, r8, lr} -+ stmgeia ip!, {r1, r3, r8, lr} - bgt 2b -- ldmeqfd sp!, {pc} @ Now <64 bytes to go. -+ ldmeqfd sp!, {r8, pc} @ Now <64 bytes to go. - /* - * No need to correct the count; we're only testing bits from now on - */ - tst r2, #32 -- stmneia r0!, {r1, r3, ip, lr} -- stmneia r0!, {r1, r3, ip, lr} -+ stmneia ip!, {r1, r3, r8, lr} -+ stmneia ip!, {r1, r3, r8, lr} - tst r2, #16 -- stmneia r0!, {r1, r3, ip, lr} -- ldr lr, [sp], #4 -+ stmneia ip!, {r1, r3, r8, lr} -+ ldmfd sp!, {r8, lr} - - #else - -@@ -74,54 +77,54 @@ ENTRY(memset) - * whole cache lines at once. - */ - -- stmfd sp!, {r4-r7, lr} -+ stmfd sp!, {r4-r8, lr} - mov r4, r1 - mov r5, r1 - mov r6, r1 - mov r7, r1 -- mov ip, r1 -+ mov r8, r1 - mov lr, r1 - - cmp r2, #96 -- tstgt r0, #31 -+ tstgt ip, #31 - ble 3f - -- and ip, r0, #31 -- rsb ip, ip, #32 -- sub r2, r2, ip -- movs ip, ip, lsl #(32 - 4) -- stmcsia r0!, {r4, r5, r6, r7} -- stmmiia r0!, {r4, r5} -- tst ip, #(1 << 30) -- mov ip, r1 -- strne r1, [r0], #4 -+ and r8, ip, #31 -+ rsb r8, r8, #32 -+ sub r2, r2, r8 -+ movs r8, r8, lsl #(32 - 4) -+ stmcsia ip!, {r4, r5, r6, r7} -+ stmmiia ip!, {r4, r5} -+ tst r8, #(1 << 30) -+ mov r8, r1 -+ strne r1, [ip], #4 - - 3: subs r2, r2, #64 -- stmgeia r0!, {r1, r3-r7, ip, lr} -- stmgeia r0!, {r1, r3-r7, ip, lr} -+ stmgeia ip!, {r1, r3-r8, lr} -+ stmgeia ip!, {r1, r3-r8, lr} - bgt 3b -- ldmeqfd sp!, {r4-r7, pc} -+ ldmeqfd sp!, {r4-r8, pc} - - tst r2, #32 -- stmneia r0!, {r1, r3-r7, ip, lr} -+ stmneia ip!, {r1, r3-r8, lr} - tst r2, #16 -- stmneia r0!, {r4-r7} -- ldmfd sp!, {r4-r7, lr} -+ stmneia ip!, {r4-r7} -+ ldmfd sp!, {r4-r8, lr} - - #endif - - 4: tst r2, #8 -- stmneia r0!, {r1, r3} -+ stmneia ip!, {r1, r3} - tst r2, #4 -- strne r1, [r0], #4 -+ strne r1, [ip], #4 - /* - * When we get here, we've got less than 4 bytes to zero. We - * may have an unaligned pointer as well. - */ - 5: tst r2, #2 -- strneb r1, [r0], #1 -- strneb r1, [r0], #1 -+ strneb r1, [ip], #1 -+ strneb r1, [ip], #1 - tst r2, #1 -- strneb r1, [r0], #1 -+ strneb r1, [ip], #1 - mov pc, lr - ENDPROC(memset) diff --git a/target/linux/generic/patches-3.3/002-ARM-7668-1-fix-memset-related-crashes-caused-by-rece.patch b/target/linux/generic/patches-3.3/002-ARM-7668-1-fix-memset-related-crashes-caused-by-rece.patch deleted file mode 100644 index 266e507e69..0000000000 --- a/target/linux/generic/patches-3.3/002-ARM-7668-1-fix-memset-related-crashes-caused-by-rece.patch +++ /dev/null @@ -1,78 +0,0 @@ -From 418df63adac56841ef6b0f1fcf435bc64d4ed177 Mon Sep 17 00:00:00 2001 -From: Nicolas Pitre -Date: Tue, 12 Mar 2013 13:00:42 +0100 -Subject: [PATCH] ARM: 7670/1: fix the memset fix - -Commit 455bd4c430b0 ("ARM: 7668/1: fix memset-related crashes caused by -recent GCC (4.7.2) optimizations") attempted to fix a compliance issue -with the memset return value. However the memset itself became broken -by that patch for misaligned pointers. - -This fixes the above by branching over the entry code from the -misaligned fixup code to avoid reloading the original pointer. - -Also, because the function entry alignment is wrong in the Thumb mode -compilation, that fixup code is moved to the end. - -While at it, the entry instructions are slightly reworked to help dual -issue pipelines. - -Signed-off-by: Nicolas Pitre -Tested-by: Alexander Holler -Signed-off-by: Russell King ---- - arch/arm/lib/memset.S | 33 +++++++++++++-------------------- - 1 file changed, 13 insertions(+), 20 deletions(-) - ---- a/arch/arm/lib/memset.S -+++ b/arch/arm/lib/memset.S -@@ -14,31 +14,15 @@ - - .text - .align 5 -- .word 0 -- --1: subs r2, r2, #4 @ 1 do we have enough -- blt 5f @ 1 bytes to align with? -- cmp r3, #2 @ 1 -- strltb r1, [ip], #1 @ 1 -- strleb r1, [ip], #1 @ 1 -- strb r1, [ip], #1 @ 1 -- add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) --/* -- * The pointer is now aligned and the length is adjusted. Try doing the -- * memset again. -- */ - - ENTRY(memset) --/* -- * Preserve the contents of r0 for the return value. -- */ -- mov ip, r0 -- ands r3, ip, #3 @ 1 unaligned? -- bne 1b @ 1 -+ ands r3, r0, #3 @ 1 unaligned? -+ mov ip, r0 @ preserve r0 as return value -+ bne 6f @ 1 - /* - * we know that the pointer in ip is aligned to a word boundary. - */ -- orr r1, r1, r1, lsl #8 -+1: orr r1, r1, r1, lsl #8 - orr r1, r1, r1, lsl #16 - mov r3, r1 - cmp r2, #16 -@@ -127,4 +111,13 @@ ENTRY(memset) - tst r2, #1 - strneb r1, [ip], #1 - mov pc, lr -+ -+6: subs r2, r2, #4 @ 1 do we have enough -+ blt 5b @ 1 bytes to align with? -+ cmp r3, #2 @ 1 -+ strltb r1, [ip], #1 @ 1 -+ strleb r1, [ip], #1 @ 1 -+ strb r1, [ip], #1 @ 1 -+ add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) -+ b 1b - ENDPROC(memset) diff --git a/target/linux/generic/patches-3.3/003-MIPS-Refactor-clear_page-and-copy_page-functions.patch b/target/linux/generic/patches-3.3/003-MIPS-Refactor-clear_page-and-copy_page-functions.patch deleted file mode 100644 index da85701aeb..0000000000 --- a/target/linux/generic/patches-3.3/003-MIPS-Refactor-clear_page-and-copy_page-functions.patch +++ /dev/null @@ -1,249 +0,0 @@ -From c022630633624a75b3b58f43dd3c6cc896a56cff Mon Sep 17 00:00:00 2001 -From: "Steven J. Hill" -Date: Fri, 6 Jul 2012 21:56:01 +0200 -Subject: [PATCH] MIPS: Refactor 'clear_page' and 'copy_page' functions. - -Remove usage of the '__attribute__((alias("...")))' hack that aliased -to integer arrays containing micro-assembled instructions. This hack -breaks when building a microMIPS kernel. It also makes the code much -easier to understand. - -[ralf@linux-mips.org: Added back export of the clear_page and copy_page -symbols so certain modules will work again. Also fixed build with -CONFIG_SIBYTE_DMA_PAGEOPS enabled.] - -Signed-off-by: Steven J. Hill -Cc: linux-mips@linux-mips.org -Patchwork: https://patchwork.linux-mips.org/patch/3866/ -Acked-by: David Daney -Signed-off-by: Ralf Baechle ---- - arch/mips/kernel/mips_ksyms.c | 8 ++++- - arch/mips/mm/Makefile | 4 +-- - arch/mips/mm/page-funcs.S | 50 ++++++++++++++++++++++++++++++ - arch/mips/mm/page.c | 67 +++++++++++------------------------------ - 4 files changed, 77 insertions(+), 52 deletions(-) - create mode 100644 arch/mips/mm/page-funcs.S - ---- a/arch/mips/kernel/mips_ksyms.c -+++ b/arch/mips/kernel/mips_ksyms.c -@@ -5,7 +5,7 @@ - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * -- * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05 by Ralf Baechle -+ * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05, 12 by Ralf Baechle - * Copyright (C) 1999, 2000, 01 Silicon Graphics, Inc. - */ - #include -@@ -35,6 +35,12 @@ EXPORT_SYMBOL(memmove); - EXPORT_SYMBOL(kernel_thread); - - /* -+ * Functions that operate on entire pages. Mostly used by memory management. -+ */ -+EXPORT_SYMBOL(clear_page); -+EXPORT_SYMBOL(copy_page); -+ -+/* - * Userspace access stuff. - */ - EXPORT_SYMBOL(__copy_user); ---- a/arch/mips/mm/Makefile -+++ b/arch/mips/mm/Makefile -@@ -3,8 +3,8 @@ - # - - obj-y += cache.o dma-default.o extable.o fault.o \ -- gup.o init.o mmap.o page.o tlbex.o \ -- tlbex-fault.o uasm.o -+ gup.o init.o mmap.o page.o page-funcs.o \ -+ tlbex.o tlbex-fault.o uasm.o - - obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o - obj-$(CONFIG_64BIT) += pgtable-64.o ---- /dev/null -+++ b/arch/mips/mm/page-funcs.S -@@ -0,0 +1,50 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Micro-assembler generated clear_page/copy_page functions. -+ * -+ * Copyright (C) 2012 MIPS Technologies, Inc. -+ * Copyright (C) 2012 Ralf Baechle -+ */ -+#include -+#include -+ -+#ifdef CONFIG_SIBYTE_DMA_PAGEOPS -+#define cpu_clear_page_function_name clear_page_cpu -+#define cpu_copy_page_function_name copy_page_cpu -+#else -+#define cpu_clear_page_function_name clear_page -+#define cpu_copy_page_function_name copy_page -+#endif -+ -+/* -+ * Maximum sizes: -+ * -+ * R4000 128 bytes S-cache: 0x058 bytes -+ * R4600 v1.7: 0x05c bytes -+ * R4600 v2.0: 0x060 bytes -+ * With prefetching, 16 word strides 0x120 bytes -+ */ -+EXPORT(__clear_page_start) -+LEAF(cpu_clear_page_function_name) -+1: j 1b /* Dummy, will be replaced. */ -+ .space 288 -+END(cpu_clear_page_function_name) -+EXPORT(__clear_page_end) -+ -+/* -+ * Maximum sizes: -+ * -+ * R4000 128 bytes S-cache: 0x11c bytes -+ * R4600 v1.7: 0x080 bytes -+ * R4600 v2.0: 0x07c bytes -+ * With prefetching, 16 word strides 0x540 bytes -+ */ -+EXPORT(__copy_page_start) -+LEAF(cpu_copy_page_function_name) -+1: j 1b /* Dummy, will be replaced. */ -+ .space 1344 -+END(cpu_copy_page_function_name) -+EXPORT(__copy_page_end) ---- a/arch/mips/mm/page.c -+++ b/arch/mips/mm/page.c -@@ -6,6 +6,7 @@ - * Copyright (C) 2003, 04, 05 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 2007 Maciej W. Rozycki - * Copyright (C) 2008 Thiemo Seufer -+ * Copyright (C) 2012 MIPS Technologies, Inc. - */ - #include - #include -@@ -72,45 +73,6 @@ static struct uasm_reloc __cpuinitdata r - #define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x00002010) - #define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x00002020) - --/* -- * Maximum sizes: -- * -- * R4000 128 bytes S-cache: 0x058 bytes -- * R4600 v1.7: 0x05c bytes -- * R4600 v2.0: 0x060 bytes -- * With prefetching, 16 word strides 0x120 bytes -- */ -- --static u32 clear_page_array[0x120 / 4]; -- --#ifdef CONFIG_SIBYTE_DMA_PAGEOPS --void clear_page_cpu(void *page) __attribute__((alias("clear_page_array"))); --#else --void clear_page(void *page) __attribute__((alias("clear_page_array"))); --#endif -- --EXPORT_SYMBOL(clear_page); -- --/* -- * Maximum sizes: -- * -- * R4000 128 bytes S-cache: 0x11c bytes -- * R4600 v1.7: 0x080 bytes -- * R4600 v2.0: 0x07c bytes -- * With prefetching, 16 word strides 0x540 bytes -- */ --static u32 copy_page_array[0x540 / 4]; -- --#ifdef CONFIG_SIBYTE_DMA_PAGEOPS --void --copy_page_cpu(void *to, void *from) __attribute__((alias("copy_page_array"))); --#else --void copy_page(void *to, void *from) __attribute__((alias("copy_page_array"))); --#endif -- --EXPORT_SYMBOL(copy_page); -- -- - static int pref_bias_clear_store __cpuinitdata; - static int pref_bias_copy_load __cpuinitdata; - static int pref_bias_copy_store __cpuinitdata; -@@ -283,10 +245,15 @@ static inline void __cpuinit build_clear - } - } - -+extern u32 __clear_page_start; -+extern u32 __clear_page_end; -+extern u32 __copy_page_start; -+extern u32 __copy_page_end; -+ - void __cpuinit build_clear_page(void) - { - int off; -- u32 *buf = (u32 *)&clear_page_array; -+ u32 *buf = &__clear_page_start; - struct uasm_label *l = labels; - struct uasm_reloc *r = relocs; - int i; -@@ -357,17 +324,17 @@ void __cpuinit build_clear_page(void) - uasm_i_jr(&buf, RA); - uasm_i_nop(&buf); - -- BUG_ON(buf > clear_page_array + ARRAY_SIZE(clear_page_array)); -+ BUG_ON(buf > &__clear_page_end); - - uasm_resolve_relocs(relocs, labels); - - pr_debug("Synthesized clear page handler (%u instructions).\n", -- (u32)(buf - clear_page_array)); -+ (u32)(buf - &__clear_page_start)); - - pr_debug("\t.set push\n"); - pr_debug("\t.set noreorder\n"); -- for (i = 0; i < (buf - clear_page_array); i++) -- pr_debug("\t.word 0x%08x\n", clear_page_array[i]); -+ for (i = 0; i < (buf - &__clear_page_start); i++) -+ pr_debug("\t.word 0x%08x\n", (&__clear_page_start)[i]); - pr_debug("\t.set pop\n"); - } - -@@ -428,7 +395,7 @@ static inline void build_copy_store_pref - void __cpuinit build_copy_page(void) - { - int off; -- u32 *buf = (u32 *)©_page_array; -+ u32 *buf = &__copy_page_start; - struct uasm_label *l = labels; - struct uasm_reloc *r = relocs; - int i; -@@ -596,21 +563,23 @@ void __cpuinit build_copy_page(void) - uasm_i_jr(&buf, RA); - uasm_i_nop(&buf); - -- BUG_ON(buf > copy_page_array + ARRAY_SIZE(copy_page_array)); -+ BUG_ON(buf > &__copy_page_end); - - uasm_resolve_relocs(relocs, labels); - - pr_debug("Synthesized copy page handler (%u instructions).\n", -- (u32)(buf - copy_page_array)); -+ (u32)(buf - &__copy_page_start)); - - pr_debug("\t.set push\n"); - pr_debug("\t.set noreorder\n"); -- for (i = 0; i < (buf - copy_page_array); i++) -- pr_debug("\t.word 0x%08x\n", copy_page_array[i]); -+ for (i = 0; i < (buf - &__copy_page_start); i++) -+ pr_debug("\t.word 0x%08x\n", (&__copy_page_start)[i]); - pr_debug("\t.set pop\n"); - } - - #ifdef CONFIG_SIBYTE_DMA_PAGEOPS -+extern void clear_page_cpu(void *page); -+extern void copy_page_cpu(void *to, void *from); - - /* - * Pad descriptors to cacheline, since each is exclusively owned by a diff --git a/target/linux/generic/patches-3.3/006-arm_kernel_xz_support.patch b/target/linux/generic/patches-3.3/006-arm_kernel_xz_support.patch deleted file mode 100644 index bfb175759b..0000000000 --- a/target/linux/generic/patches-3.3/006-arm_kernel_xz_support.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 2d303b4683145f7dbc918bd14d04e1396581b2ce Mon Sep 17 00:00:00 2001 -From: Imre Kaloz -Date: Thu, 7 Jul 2011 12:05:21 +0200 -Subject: [PATCH] ARM: support XZ compressed kernels - -Wire up support for the XZ decompressor - -Signed-off-by: Imre Kaloz ---- - arch/arm/Kconfig | 1 + - arch/arm/boot/compressed/Makefile | 11 +++++++++-- - arch/arm/boot/compressed/decompress.c | 4 ++++ - arch/arm/boot/compressed/piggy.xzkern.S | 6 ++++++ - lib/xz/xz_dec_stream.c | 1 + - 5 files changed, 21 insertions(+), 2 deletions(-) - create mode 100644 arch/arm/boot/compressed/piggy.xzkern.S - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -21,6 +21,7 @@ config ARM - select HAVE_KERNEL_GZIP - select HAVE_KERNEL_LZO - select HAVE_KERNEL_LZMA -+ select HAVE_KERNEL_XZ - select HAVE_IRQ_WORK - select HAVE_PERF_EVENTS - select PERF_USE_VMALLOC ---- a/arch/arm/boot/compressed/Makefile -+++ b/arch/arm/boot/compressed/Makefile -@@ -92,6 +92,7 @@ SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/ - suffix_$(CONFIG_KERNEL_GZIP) = gzip - suffix_$(CONFIG_KERNEL_LZO) = lzo - suffix_$(CONFIG_KERNEL_LZMA) = lzma -+suffix_$(CONFIG_KERNEL_XZ) = xzkern - - # Borrowed libfdt files for the ATAG compatibility mode - -@@ -115,7 +116,7 @@ targets := vmlinux vmlinux.lds \ - lib1funcs.o lib1funcs.S font.o font.c head.o misc.o $(OBJS) - - # Make sure files are removed during clean --extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S $(libfdt) $(libfdt_hdrs) -+extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) - - ifeq ($(CONFIG_FUNCTION_TRACER),y) - ORIG_CFLAGS := $(KBUILD_CFLAGS) -@@ -171,8 +172,14 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CO - false; \ - fi - -+# For __aeabi_llsl -+ashldi3 = $(obj)/ashldi3.o -+ -+$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S FORCE -+ $(call cmd,shipped) -+ - $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ -- $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE -+ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) FORCE - @$(check_for_multiple_zreladdr) - $(call if_changed,ld) - @$(check_for_bad_syms) ---- a/arch/arm/boot/compressed/decompress.c -+++ b/arch/arm/boot/compressed/decompress.c -@@ -44,6 +44,12 @@ extern void error(char *); - #include "../../../../lib/decompress_unlzma.c" - #endif - -+#ifdef CONFIG_KERNEL_XZ -+#define memmove memmove -+#define memcpy memcpy -+#include "../../../../lib/decompress_unxz.c" -+#endif -+ - int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x)) - { - return decompress(input, len, NULL, NULL, output, NULL, error); ---- /dev/null -+++ b/arch/arm/boot/compressed/piggy.xzkern.S -@@ -0,0 +1,6 @@ -+ .section .piggydata,#alloc -+ .globl input_data -+input_data: -+ .incbin "arch/arm/boot/compressed/piggy.xzkern" -+ .globl input_data_end -+input_data_end: ---- a/lib/xz/xz_dec_stream.c -+++ b/lib/xz/xz_dec_stream.c -@@ -9,6 +9,7 @@ - - #include "xz_private.h" - #include "xz_stream.h" -+#include - - /* Hash used to validate the Index field */ - struct xz_dec_hash { diff --git a/target/linux/generic/patches-3.3/007-hso-Earlier-catch-of-error-condition.patch b/target/linux/generic/patches-3.3/007-hso-Earlier-catch-of-error-condition.patch deleted file mode 100644 index bbc2b822be..0000000000 --- a/target/linux/generic/patches-3.3/007-hso-Earlier-catch-of-error-condition.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 35e57e1b49a351aa804dab6010cd46ae6112a541 Mon Sep 17 00:00:00 2001 -From: Daniel Gimpelevich -Date: Wed, 21 Aug 2013 01:43:07 -0700 -Subject: [PATCH 1/2] hso: Earlier catch of error condition - -There is no need to get an interface specification if we know it's the -wrong one. - -Signed-off-by: Daniel Gimpelevich -Acked-by: Greg Kroah-Hartman -Signed-off-by: David S. Miller ---- - drivers/net/usb/hso.c | 9 +++++---- - 1 file changed, 5 insertions(+), 4 deletions(-) - ---- a/drivers/net/usb/hso.c -+++ b/drivers/net/usb/hso.c -@@ -2927,6 +2927,11 @@ static int hso_probe(struct usb_interfac - struct hso_shared_int *shared_int; - struct hso_device *tmp_dev = NULL; - -+ if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) { -+ dev_err(&interface->dev, "Not our interface\n"); -+ return -ENODEV; -+ } -+ - if_num = interface->altsetting->desc.bInterfaceNumber; - - /* Get the interface/port specification from either driver_info or from -@@ -2936,10 +2941,6 @@ static int hso_probe(struct usb_interfac - else - port_spec = hso_get_config_data(interface); - -- if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) { -- dev_err(&interface->dev, "Not our interface\n"); -- return -ENODEV; -- } - /* Check if we need to switch to alt interfaces prior to port - * configuration */ - if (interface->num_altsetting > 1) diff --git a/target/linux/generic/patches-3.3/008-hso-Fix-stack-corruption-on-some-architectures.patch b/target/linux/generic/patches-3.3/008-hso-Fix-stack-corruption-on-some-architectures.patch deleted file mode 100644 index e5b7e4b772..0000000000 --- a/target/linux/generic/patches-3.3/008-hso-Fix-stack-corruption-on-some-architectures.patch +++ /dev/null @@ -1,48 +0,0 @@ -From e75dc677ff8d06ffa61bef6fee436227ae5440c6 Mon Sep 17 00:00:00 2001 -From: Daniel Gimpelevich -Date: Wed, 21 Aug 2013 01:43:19 -0700 -Subject: [PATCH 2/2] hso: Fix stack corruption on some architectures - -As Sergei Shtylyov explained in the #mipslinux IRC channel: -[Mon 2013-08-19 12:28:21 PM PDT] guys, are you sure it's not "DMA off stack" case? -[Mon 2013-08-19 12:28:35 PM PDT] it's a known stack corruptor on non-coherent arches -[Mon 2013-08-19 12:31:48 PM PDT] headless: for usb/ehci? -[Mon 2013-08-19 12:34:11 PM PDT] headless: explain -[Mon 2013-08-19 12:35:38 PM PDT] usb_control_msg() (or other such func) should not use buffer on stack. DMA from/to stack is prohibited -[Mon 2013-08-19 12:35:58 PM PDT] and EHCI uses DMA on control xfers (as well as all the others) - -Signed-off-by: Daniel Gimpelevich -Acked-by: Greg Kroah-Hartman -Signed-off-by: David S. Miller ---- - drivers/net/usb/hso.c | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - ---- a/drivers/net/usb/hso.c -+++ b/drivers/net/usb/hso.c -@@ -2857,13 +2857,16 @@ exit: - static int hso_get_config_data(struct usb_interface *interface) - { - struct usb_device *usbdev = interface_to_usbdev(interface); -- u8 config_data[17]; -+ u8 *config_data = kmalloc(17, GFP_KERNEL); - u32 if_num = interface->altsetting->desc.bInterfaceNumber; - s32 result; - -+ if (!config_data) -+ return -ENOMEM; - if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), - 0x86, 0xC0, 0, 0, config_data, 17, - USB_CTRL_SET_TIMEOUT) != 0x11) { -+ kfree(config_data); - return -EIO; - } - -@@ -2914,6 +2917,7 @@ static int hso_get_config_data(struct us - if (config_data[16] & 0x1) - result |= HSO_INFO_CRC_BUG; - -+ kfree(config_data); - return result; - } - diff --git a/target/linux/generic/patches-3.3/020-ssb_update.patch b/target/linux/generic/patches-3.3/020-ssb_update.patch deleted file mode 100644 index 5354cc7b25..0000000000 --- a/target/linux/generic/patches-3.3/020-ssb_update.patch +++ /dev/null @@ -1,3206 +0,0 @@ ---- a/arch/mips/bcm47xx/nvram.c -+++ b/arch/mips/bcm47xx/nvram.c -@@ -43,8 +43,8 @@ static void early_nvram_init(void) - #ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - mcore_ssb = &bcm47xx_bus.ssb.mipscore; -- base = mcore_ssb->flash_window; -- lim = mcore_ssb->flash_window_size; -+ base = mcore_ssb->pflash.window; -+ lim = mcore_ssb->pflash.window_size; - break; - #endif - #ifdef CONFIG_BCM47XX_BCMA ---- a/arch/mips/bcm47xx/wgt634u.c -+++ b/arch/mips/bcm47xx/wgt634u.c -@@ -156,10 +156,10 @@ static int __init wgt634u_init(void) - SSB_CHIPCO_IRQ_GPIO); - } - -- wgt634u_flash_data.width = mcore->flash_buswidth; -- wgt634u_flash_resource.start = mcore->flash_window; -- wgt634u_flash_resource.end = mcore->flash_window -- + mcore->flash_window_size -+ wgt634u_flash_data.width = mcore->pflash.buswidth; -+ wgt634u_flash_resource.start = mcore->pflash.window; -+ wgt634u_flash_resource.end = mcore->pflash.window -+ + mcore->pflash.window_size - - 1; - return platform_add_devices(wgt634u_devices, - ARRAY_SIZE(wgt634u_devices)); ---- a/drivers/ssb/Kconfig -+++ b/drivers/ssb/Kconfig -@@ -136,10 +136,15 @@ config SSB_DRIVER_MIPS - - If unsure, say N - -+config SSB_SFLASH -+ bool "SSB serial flash support" -+ depends on SSB_DRIVER_MIPS -+ default y -+ - # Assumption: We are on embedded, if we compile the MIPS core. - config SSB_EMBEDDED - bool -- depends on SSB_DRIVER_MIPS -+ depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE - default y - - config SSB_DRIVER_EXTIF -@@ -160,4 +165,12 @@ config SSB_DRIVER_GIGE - - If unsure, say N - -+config SSB_DRIVER_GPIO -+ bool "SSB GPIO driver" -+ depends on SSB && GPIOLIB -+ help -+ Driver to provide access to the GPIO pins on the bus. -+ -+ If unsure, say N -+ - endmenu ---- a/drivers/ssb/Makefile -+++ b/drivers/ssb/Makefile -@@ -11,10 +11,12 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o - # built-in drivers - ssb-y += driver_chipcommon.o - ssb-y += driver_chipcommon_pmu.o -+ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o - ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o - ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o - ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o - ssb-$(CONFIG_SSB_DRIVER_GIGE) += driver_gige.o -+ssb-$(CONFIG_SSB_DRIVER_GPIO) += driver_gpio.o - - # b43 pci-ssb-bridge driver - # Not strictly a part of SSB, but kept here for convenience ---- a/drivers/ssb/b43_pci_bridge.c -+++ b/drivers/ssb/b43_pci_bridge.c -@@ -29,11 +29,15 @@ static const struct pci_device_id b43_pc - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4329) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432b) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432c) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4350) }, - { 0, }, - }; - MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl); ---- a/drivers/ssb/driver_chipcommon.c -+++ b/drivers/ssb/driver_chipcommon.c -@@ -4,6 +4,7 @@ - * - * Copyright 2005, Broadcom Corporation - * Copyright 2006, 2007, Michael Buesch -+ * Copyright 2012, Hauke Mehrtens - * - * Licensed under the GNU/GPL. See COPYING for details. - */ -@@ -12,6 +13,7 @@ - #include - #include - #include -+#include - - #include "ssb_private.h" - -@@ -280,13 +282,79 @@ static void calc_fast_powerup_delay(stru - cc->fast_pwrup_delay = tmp; - } - -+static u32 ssb_chipco_alp_clock(struct ssb_chipcommon *cc) -+{ -+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) -+ return ssb_pmu_get_alp_clock(cc); -+ -+ return 20000000; -+} -+ -+static u32 ssb_chipco_watchdog_get_max_timer(struct ssb_chipcommon *cc) -+{ -+ u32 nb; -+ -+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { -+ if (cc->dev->id.revision < 26) -+ nb = 16; -+ else -+ nb = (cc->dev->id.revision >= 37) ? 32 : 24; -+ } else { -+ nb = 28; -+ } -+ if (nb == 32) -+ return 0xffffffff; -+ else -+ return (1 << nb) - 1; -+} -+ -+u32 ssb_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks) -+{ -+ struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt); -+ -+ if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB) -+ return 0; -+ -+ return ssb_chipco_watchdog_timer_set(cc, ticks); -+} -+ -+u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms) -+{ -+ struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt); -+ u32 ticks; -+ -+ if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB) -+ return 0; -+ -+ ticks = ssb_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms); -+ return ticks / cc->ticks_per_ms; -+} -+ -+static int ssb_chipco_watchdog_ticks_per_ms(struct ssb_chipcommon *cc) -+{ -+ struct ssb_bus *bus = cc->dev->bus; -+ -+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { -+ /* based on 32KHz ILP clock */ -+ return 32; -+ } else { -+ if (cc->dev->id.revision < 18) -+ return ssb_clockspeed(bus) / 1000; -+ else -+ return ssb_chipco_alp_clock(cc) / 1000; -+ } -+} -+ - void ssb_chipcommon_init(struct ssb_chipcommon *cc) - { - if (!cc->dev) - return; /* We don't have a ChipCommon */ -+ -+ spin_lock_init(&cc->gpio_lock); -+ - if (cc->dev->id.revision >= 11) - cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); -- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status); -+ ssb_dbg("chipcommon status is 0x%x\n", cc->status); - - if (cc->dev->id.revision >= 20) { - chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0); -@@ -297,6 +365,11 @@ void ssb_chipcommon_init(struct ssb_chip - chipco_powercontrol_init(cc); - ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); - calc_fast_powerup_delay(cc); -+ -+ if (cc->dev->bus->bustype == SSB_BUSTYPE_SSB) { -+ cc->ticks_per_ms = ssb_chipco_watchdog_ticks_per_ms(cc); -+ cc->max_timer_ms = ssb_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms; -+ } - } - - void ssb_chipco_suspend(struct ssb_chipcommon *cc) -@@ -395,10 +468,27 @@ void ssb_chipco_timing_init(struct ssb_c - } - - /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ --void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks) -+u32 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks) - { -- /* instant NMI */ -- chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks); -+ u32 maxt; -+ enum ssb_clkmode clkmode; -+ -+ maxt = ssb_chipco_watchdog_get_max_timer(cc); -+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { -+ if (ticks == 1) -+ ticks = 2; -+ else if (ticks > maxt) -+ ticks = maxt; -+ chipco_write32(cc, SSB_CHIPCO_PMU_WATCHDOG, ticks); -+ } else { -+ clkmode = ticks ? SSB_CLKMODE_FAST : SSB_CLKMODE_DYNAMIC; -+ ssb_chipco_set_clockmode(cc, clkmode); -+ if (ticks > maxt) -+ ticks = maxt; -+ /* instant NMI */ -+ chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks); -+ } -+ return ticks; - } - - void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value) -@@ -418,28 +508,93 @@ u32 ssb_chipco_gpio_in(struct ssb_chipco - - u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value) - { -- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value); -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&cc->gpio_lock, flags); -+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value); -+ spin_unlock_irqrestore(&cc->gpio_lock, flags); -+ -+ return res; - } - - u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value) - { -- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value); -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&cc->gpio_lock, flags); -+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value); -+ spin_unlock_irqrestore(&cc->gpio_lock, flags); -+ -+ return res; - } - - u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value) - { -- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&cc->gpio_lock, flags); -+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); -+ spin_unlock_irqrestore(&cc->gpio_lock, flags); -+ -+ return res; - } - EXPORT_SYMBOL(ssb_chipco_gpio_control); - - u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value) - { -- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value); -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&cc->gpio_lock, flags); -+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value); -+ spin_unlock_irqrestore(&cc->gpio_lock, flags); -+ -+ return res; - } - - u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value) - { -- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value); -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&cc->gpio_lock, flags); -+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value); -+ spin_unlock_irqrestore(&cc->gpio_lock, flags); -+ -+ return res; -+} -+ -+u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value) -+{ -+ unsigned long flags; -+ u32 res = 0; -+ -+ if (cc->dev->id.revision < 20) -+ return 0xffffffff; -+ -+ spin_lock_irqsave(&cc->gpio_lock, flags); -+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLUP, mask, value); -+ spin_unlock_irqrestore(&cc->gpio_lock, flags); -+ -+ return res; -+} -+ -+u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value) -+{ -+ unsigned long flags; -+ u32 res = 0; -+ -+ if (cc->dev->id.revision < 20) -+ return 0xffffffff; -+ -+ spin_lock_irqsave(&cc->gpio_lock, flags); -+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLDOWN, mask, value); -+ spin_unlock_irqrestore(&cc->gpio_lock, flags); -+ -+ return res; - } - - #ifdef CONFIG_SSB_SERIAL -@@ -473,12 +628,7 @@ int ssb_chipco_serial_init(struct ssb_ch - chipco_read32(cc, SSB_CHIPCO_CORECTL) - | SSB_CHIPCO_CORECTL_UARTCLK0); - } else if ((ccrev >= 11) && (ccrev != 15)) { -- /* Fixed ALP clock */ -- baud_base = 20000000; -- if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { -- /* FIXME: baud_base is different for devices with a PMU */ -- SSB_WARN_ON(1); -- } -+ baud_base = ssb_chipco_alp_clock(cc); - div = 1; - if (ccrev >= 21) { - /* Turn off UART clock before switching clocksource. */ ---- a/drivers/ssb/driver_chipcommon_pmu.c -+++ b/drivers/ssb/driver_chipcommon_pmu.c -@@ -13,6 +13,9 @@ - #include - #include - #include -+#ifdef CONFIG_BCM47XX -+#include -+#endif - - #include "ssb_private.h" - -@@ -92,10 +95,6 @@ static void ssb_pmu0_pllinit_r0(struct s - u32 pmuctl, tmp, pllctl; - unsigned int i; - -- if ((bus->chip_id == 0x5354) && !crystalfreq) { -- /* The 5354 crystal freq is 25MHz */ -- crystalfreq = 25000; -- } - if (crystalfreq) - e = pmu0_plltab_find_entry(crystalfreq); - if (!e) -@@ -111,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s - return; - } - -- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", -- (crystalfreq / 1000), (crystalfreq % 1000)); -+ ssb_info("Programming PLL to %u.%03u MHz\n", -+ crystalfreq / 1000, crystalfreq % 1000); - - /* First turn the PLL off. */ - switch (bus->chip_id) { -@@ -139,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s - } - tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); - if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) -- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); -+ ssb_emerg("Failed to turn the PLL off!\n"); - - /* Set PDIV in PLL control 0. */ - pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0); -@@ -250,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s - return; - } - -- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", -- (crystalfreq / 1000), (crystalfreq % 1000)); -+ ssb_info("Programming PLL to %u.%03u MHz\n", -+ crystalfreq / 1000, crystalfreq % 1000); - - /* First turn the PLL off. */ - switch (bus->chip_id) { -@@ -276,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s - } - tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); - if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) -- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); -+ ssb_emerg("Failed to turn the PLL off!\n"); - - /* Set p1div and p2div. */ - pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0); -@@ -321,7 +320,11 @@ static void ssb_pmu_pll_init(struct ssb_ - u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ - - if (bus->bustype == SSB_BUSTYPE_SSB) { -- /* TODO: The user may override the crystal frequency. */ -+#ifdef CONFIG_BCM47XX -+ char buf[20]; -+ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) -+ crystalfreq = simple_strtoul(buf, NULL, 0); -+#endif - } - - switch (bus->chip_id) { -@@ -330,7 +333,11 @@ static void ssb_pmu_pll_init(struct ssb_ - ssb_pmu1_pllinit_r0(cc, crystalfreq); - break; - case 0x4328: -+ ssb_pmu0_pllinit_r0(cc, crystalfreq); -+ break; - case 0x5354: -+ if (crystalfreq == 0) -+ crystalfreq = 25000; - ssb_pmu0_pllinit_r0(cc, crystalfreq); - break; - case 0x4322: -@@ -339,10 +346,11 @@ static void ssb_pmu_pll_init(struct ssb_ - chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0); - } - break; -+ case 43222: -+ break; - default: -- ssb_printk(KERN_ERR PFX -- "ERROR: PLL init unknown for device %04X\n", -- bus->chip_id); -+ ssb_err("ERROR: PLL init unknown for device %04X\n", -+ bus->chip_id); - } - } - -@@ -427,6 +435,7 @@ static void ssb_pmu_resources_init(struc - min_msk = 0xCBB; - break; - case 0x4322: -+ case 43222: - /* We keep the default settings: - * min_msk = 0xCBB - * max_msk = 0x7FFFF -@@ -462,9 +471,8 @@ static void ssb_pmu_resources_init(struc - max_msk = 0xFFFFF; - break; - default: -- ssb_printk(KERN_ERR PFX -- "ERROR: PMU resource config unknown for device %04X\n", -- bus->chip_id); -+ ssb_err("ERROR: PMU resource config unknown for device %04X\n", -+ bus->chip_id); - } - - if (updown_tab) { -@@ -516,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon - pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP); - cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION); - -- ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", -- cc->pmu.rev, pmucap); -+ ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n", -+ cc->pmu.rev, pmucap); - - if (cc->pmu.rev == 1) - chipco_mask32(cc, SSB_CHIPCO_PMU_CTL, -@@ -607,3 +615,102 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch - - EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); - EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); -+ -+static u32 ssb_pmu_get_alp_clock_clk0(struct ssb_chipcommon *cc) -+{ -+ u32 crystalfreq; -+ const struct pmu0_plltab_entry *e = NULL; -+ -+ crystalfreq = chipco_read32(cc, SSB_CHIPCO_PMU_CTL) & -+ SSB_CHIPCO_PMU_CTL_XTALFREQ >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT; -+ e = pmu0_plltab_find_entry(crystalfreq); -+ BUG_ON(!e); -+ return e->freq * 1000; -+} -+ -+u32 ssb_pmu_get_alp_clock(struct ssb_chipcommon *cc) -+{ -+ struct ssb_bus *bus = cc->dev->bus; -+ -+ switch (bus->chip_id) { -+ case 0x5354: -+ ssb_pmu_get_alp_clock_clk0(cc); -+ default: -+ ssb_err("ERROR: PMU alp clock unknown for device %04X\n", -+ bus->chip_id); -+ return 0; -+ } -+} -+ -+u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) -+{ -+ struct ssb_bus *bus = cc->dev->bus; -+ -+ switch (bus->chip_id) { -+ case 0x5354: -+ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ -+ return 240000000; -+ default: -+ ssb_err("ERROR: PMU cpu clock unknown for device %04X\n", -+ bus->chip_id); -+ return 0; -+ } -+} -+ -+u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) -+{ -+ struct ssb_bus *bus = cc->dev->bus; -+ -+ switch (bus->chip_id) { -+ case 0x5354: -+ return 120000000; -+ default: -+ ssb_err("ERROR: PMU controlclock unknown for device %04X\n", -+ bus->chip_id); -+ return 0; -+ } -+} -+ -+void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid) -+{ -+ u32 pmu_ctl = 0; -+ -+ switch (cc->dev->bus->chip_id) { -+ case 0x4322: -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070); -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a); -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854); -+ if (spuravoid == 1) -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828); -+ else -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828); -+ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD; -+ break; -+ case 43222: -+ if (spuravoid == 1) { -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008); -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06); -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08); -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000); -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920); -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815); -+ } else { -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008); -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06); -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08); -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000); -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0); -+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855); -+ } -+ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD; -+ break; -+ default: -+ ssb_printk(KERN_ERR PFX -+ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n", -+ cc->dev->bus->chip_id); -+ return; -+ } -+ -+ chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl); -+} -+EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate); ---- /dev/null -+++ b/drivers/ssb/driver_chipcommon_sflash.c -@@ -0,0 +1,164 @@ -+/* -+ * Sonics Silicon Backplane -+ * ChipCommon serial flash interface -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include -+ -+#include "ssb_private.h" -+ -+static struct resource ssb_sflash_resource = { -+ .name = "ssb_sflash", -+ .start = SSB_FLASH2, -+ .end = 0, -+ .flags = IORESOURCE_MEM | IORESOURCE_READONLY, -+}; -+ -+struct platform_device ssb_sflash_dev = { -+ .name = "ssb_sflash", -+ .resource = &ssb_sflash_resource, -+ .num_resources = 1, -+}; -+ -+struct ssb_sflash_tbl_e { -+ char *name; -+ u32 id; -+ u32 blocksize; -+ u16 numblocks; -+}; -+ -+static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = { -+ { "M25P20", 0x11, 0x10000, 4, }, -+ { "M25P40", 0x12, 0x10000, 8, }, -+ -+ { "M25P16", 0x14, 0x10000, 32, }, -+ { "M25P32", 0x15, 0x10000, 64, }, -+ { "M25P64", 0x16, 0x10000, 128, }, -+ { "M25FL128", 0x17, 0x10000, 256, }, -+ { 0 }, -+}; -+ -+static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = { -+ { "SST25WF512", 1, 0x1000, 16, }, -+ { "SST25VF512", 0x48, 0x1000, 16, }, -+ { "SST25WF010", 2, 0x1000, 32, }, -+ { "SST25VF010", 0x49, 0x1000, 32, }, -+ { "SST25WF020", 3, 0x1000, 64, }, -+ { "SST25VF020", 0x43, 0x1000, 64, }, -+ { "SST25WF040", 4, 0x1000, 128, }, -+ { "SST25VF040", 0x44, 0x1000, 128, }, -+ { "SST25VF040B", 0x8d, 0x1000, 128, }, -+ { "SST25WF080", 5, 0x1000, 256, }, -+ { "SST25VF080B", 0x8e, 0x1000, 256, }, -+ { "SST25VF016", 0x41, 0x1000, 512, }, -+ { "SST25VF032", 0x4a, 0x1000, 1024, }, -+ { "SST25VF064", 0x4b, 0x1000, 2048, }, -+ { 0 }, -+}; -+ -+static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = { -+ { "AT45DB011", 0xc, 256, 512, }, -+ { "AT45DB021", 0x14, 256, 1024, }, -+ { "AT45DB041", 0x1c, 256, 2048, }, -+ { "AT45DB081", 0x24, 256, 4096, }, -+ { "AT45DB161", 0x2c, 512, 4096, }, -+ { "AT45DB321", 0x34, 512, 8192, }, -+ { "AT45DB642", 0x3c, 1024, 8192, }, -+ { 0 }, -+}; -+ -+static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode) -+{ -+ int i; -+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, -+ SSB_CHIPCO_FLASHCTL_START | opcode); -+ for (i = 0; i < 1000; i++) { -+ if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) & -+ SSB_CHIPCO_FLASHCTL_BUSY)) -+ return; -+ cpu_relax(); -+ } -+ pr_err("SFLASH control command failed (timeout)!\n"); -+} -+ -+/* Initialize serial flash access */ -+int ssb_sflash_init(struct ssb_chipcommon *cc) -+{ -+ struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash; -+ const struct ssb_sflash_tbl_e *e; -+ u32 id, id2; -+ -+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) { -+ case SSB_CHIPCO_FLASHT_STSER: -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP); -+ -+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0); -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES); -+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA); -+ -+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1); -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES); -+ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA); -+ -+ switch (id) { -+ case 0xbf: -+ for (e = ssb_sflash_sst_tbl; e->name; e++) { -+ if (e->id == id2) -+ break; -+ } -+ break; -+ case 0x13: -+ return -ENOTSUPP; -+ default: -+ for (e = ssb_sflash_st_tbl; e->name; e++) { -+ if (e->id == id) -+ break; -+ } -+ break; -+ } -+ if (!e->name) { -+ pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", -+ id, id2); -+ return -ENOTSUPP; -+ } -+ -+ break; -+ case SSB_CHIPCO_FLASHT_ATSER: -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS); -+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c; -+ -+ for (e = ssb_sflash_at_tbl; e->name; e++) { -+ if (e->id == id) -+ break; -+ } -+ if (!e->name) { -+ pr_err("Unsupported Atmel serial flash (id: 0x%X)\n", -+ id); -+ return -ENOTSUPP; -+ } -+ -+ break; -+ default: -+ pr_err("Unsupported flash type\n"); -+ return -ENOTSUPP; -+ } -+ -+ sflash->window = SSB_FLASH2; -+ sflash->blocksize = e->blocksize; -+ sflash->numblocks = e->numblocks; -+ sflash->size = sflash->blocksize * sflash->numblocks; -+ sflash->present = true; -+ -+ pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n", -+ e->name, sflash->size / 1024, e->blocksize, e->numblocks); -+ -+ /* Prepare platform device, but don't register it yet. It's too early, -+ * malloc (required by device_private_init) is not available yet. */ -+ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start + -+ sflash->size; -+ ssb_sflash_dev.dev.platform_data = sflash; -+ -+ return 0; -+} ---- a/drivers/ssb/driver_extif.c -+++ b/drivers/ssb/driver_extif.c -@@ -112,10 +112,37 @@ void ssb_extif_get_clockcontrol(struct s - *m = extif_read32(extif, SSB_EXTIF_CLOCK_SB); - } - --void ssb_extif_watchdog_timer_set(struct ssb_extif *extif, -- u32 ticks) -+u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks) - { -+ struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt); -+ -+ return ssb_extif_watchdog_timer_set(extif, ticks); -+} -+ -+u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms) -+{ -+ struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt); -+ u32 ticks = (SSB_EXTIF_WATCHDOG_CLK / 1000) * ms; -+ -+ ticks = ssb_extif_watchdog_timer_set(extif, ticks); -+ -+ return (ticks * 1000) / SSB_EXTIF_WATCHDOG_CLK; -+} -+ -+u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks) -+{ -+ if (ticks > SSB_EXTIF_WATCHDOG_MAX_TIMER) -+ ticks = SSB_EXTIF_WATCHDOG_MAX_TIMER; - extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks); -+ -+ return ticks; -+} -+ -+void ssb_extif_init(struct ssb_extif *extif) -+{ -+ if (!extif->dev) -+ return; /* We don't have a Extif core */ -+ spin_lock_init(&extif->gpio_lock); - } - - u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask) -@@ -125,22 +152,50 @@ u32 ssb_extif_gpio_in(struct ssb_extif * - - u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value) - { -- return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0), -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&extif->gpio_lock, flags); -+ res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0), - mask, value); -+ spin_unlock_irqrestore(&extif->gpio_lock, flags); -+ -+ return res; - } - - u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value) - { -- return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0), -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&extif->gpio_lock, flags); -+ res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0), - mask, value); -+ spin_unlock_irqrestore(&extif->gpio_lock, flags); -+ -+ return res; - } - - u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value) - { -- return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value); -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&extif->gpio_lock, flags); -+ res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value); -+ spin_unlock_irqrestore(&extif->gpio_lock, flags); -+ -+ return res; - } - - u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value) - { -- return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value); -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&extif->gpio_lock, flags); -+ res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value); -+ spin_unlock_irqrestore(&extif->gpio_lock, flags); -+ -+ return res; - } ---- /dev/null -+++ b/drivers/ssb/driver_gpio.c -@@ -0,0 +1,210 @@ -+/* -+ * Sonics Silicon Backplane -+ * GPIO driver -+ * -+ * Copyright 2011, Broadcom Corporation -+ * Copyright 2012, Hauke Mehrtens -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include -+#include -+#include -+ -+#include "ssb_private.h" -+ -+static struct ssb_bus *ssb_gpio_get_bus(struct gpio_chip *chip) -+{ -+ return container_of(chip, struct ssb_bus, gpio); -+} -+ -+static int ssb_gpio_chipco_get_value(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct ssb_bus *bus = ssb_gpio_get_bus(chip); -+ -+ return !!ssb_chipco_gpio_in(&bus->chipco, 1 << gpio); -+} -+ -+static void ssb_gpio_chipco_set_value(struct gpio_chip *chip, unsigned gpio, -+ int value) -+{ -+ struct ssb_bus *bus = ssb_gpio_get_bus(chip); -+ -+ ssb_chipco_gpio_out(&bus->chipco, 1 << gpio, value ? 1 << gpio : 0); -+} -+ -+static int ssb_gpio_chipco_direction_input(struct gpio_chip *chip, -+ unsigned gpio) -+{ -+ struct ssb_bus *bus = ssb_gpio_get_bus(chip); -+ -+ ssb_chipco_gpio_outen(&bus->chipco, 1 << gpio, 0); -+ return 0; -+} -+ -+static int ssb_gpio_chipco_direction_output(struct gpio_chip *chip, -+ unsigned gpio, int value) -+{ -+ struct ssb_bus *bus = ssb_gpio_get_bus(chip); -+ -+ ssb_chipco_gpio_outen(&bus->chipco, 1 << gpio, 1 << gpio); -+ ssb_chipco_gpio_out(&bus->chipco, 1 << gpio, value ? 1 << gpio : 0); -+ return 0; -+} -+ -+static int ssb_gpio_chipco_request(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct ssb_bus *bus = ssb_gpio_get_bus(chip); -+ -+ ssb_chipco_gpio_control(&bus->chipco, 1 << gpio, 0); -+ /* clear pulldown */ -+ ssb_chipco_gpio_pulldown(&bus->chipco, 1 << gpio, 0); -+ /* Set pullup */ -+ ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 1 << gpio); -+ -+ return 0; -+} -+ -+static void ssb_gpio_chipco_free(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct ssb_bus *bus = ssb_gpio_get_bus(chip); -+ -+ /* clear pullup */ -+ ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0); -+} -+ -+static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct ssb_bus *bus = ssb_gpio_get_bus(chip); -+ -+ if (bus->bustype == SSB_BUSTYPE_SSB) -+ return ssb_mips_irq(bus->chipco.dev) + 2; -+ else -+ return -EINVAL; -+} -+ -+static int ssb_gpio_chipco_init(struct ssb_bus *bus) -+{ -+ struct gpio_chip *chip = &bus->gpio; -+ -+ chip->label = "ssb_chipco_gpio"; -+ chip->owner = THIS_MODULE; -+ chip->request = ssb_gpio_chipco_request; -+ chip->free = ssb_gpio_chipco_free; -+ chip->get = ssb_gpio_chipco_get_value; -+ chip->set = ssb_gpio_chipco_set_value; -+ chip->direction_input = ssb_gpio_chipco_direction_input; -+ chip->direction_output = ssb_gpio_chipco_direction_output; -+ chip->to_irq = ssb_gpio_chipco_to_irq; -+ chip->ngpio = 16; -+ /* There is just one SoC in one device and its GPIO addresses should be -+ * deterministic to address them more easily. The other buses could get -+ * a random base number. */ -+ if (bus->bustype == SSB_BUSTYPE_SSB) -+ chip->base = 0; -+ else -+ chip->base = -1; -+ -+ return gpiochip_add(chip); -+} -+ -+#ifdef CONFIG_SSB_DRIVER_EXTIF -+ -+static int ssb_gpio_extif_get_value(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct ssb_bus *bus = ssb_gpio_get_bus(chip); -+ -+ return !!ssb_extif_gpio_in(&bus->extif, 1 << gpio); -+} -+ -+static void ssb_gpio_extif_set_value(struct gpio_chip *chip, unsigned gpio, -+ int value) -+{ -+ struct ssb_bus *bus = ssb_gpio_get_bus(chip); -+ -+ ssb_extif_gpio_out(&bus->extif, 1 << gpio, value ? 1 << gpio : 0); -+} -+ -+static int ssb_gpio_extif_direction_input(struct gpio_chip *chip, -+ unsigned gpio) -+{ -+ struct ssb_bus *bus = ssb_gpio_get_bus(chip); -+ -+ ssb_extif_gpio_outen(&bus->extif, 1 << gpio, 0); -+ return 0; -+} -+ -+static int ssb_gpio_extif_direction_output(struct gpio_chip *chip, -+ unsigned gpio, int value) -+{ -+ struct ssb_bus *bus = ssb_gpio_get_bus(chip); -+ -+ ssb_extif_gpio_outen(&bus->extif, 1 << gpio, 1 << gpio); -+ ssb_extif_gpio_out(&bus->extif, 1 << gpio, value ? 1 << gpio : 0); -+ return 0; -+} -+ -+static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct ssb_bus *bus = ssb_gpio_get_bus(chip); -+ -+ if (bus->bustype == SSB_BUSTYPE_SSB) -+ return ssb_mips_irq(bus->extif.dev) + 2; -+ else -+ return -EINVAL; -+} -+ -+static int ssb_gpio_extif_init(struct ssb_bus *bus) -+{ -+ struct gpio_chip *chip = &bus->gpio; -+ -+ chip->label = "ssb_extif_gpio"; -+ chip->owner = THIS_MODULE; -+ chip->get = ssb_gpio_extif_get_value; -+ chip->set = ssb_gpio_extif_set_value; -+ chip->direction_input = ssb_gpio_extif_direction_input; -+ chip->direction_output = ssb_gpio_extif_direction_output; -+ chip->to_irq = ssb_gpio_extif_to_irq; -+ chip->ngpio = 5; -+ /* There is just one SoC in one device and its GPIO addresses should be -+ * deterministic to address them more easily. The other buses could get -+ * a random base number. */ -+ if (bus->bustype == SSB_BUSTYPE_SSB) -+ chip->base = 0; -+ else -+ chip->base = -1; -+ -+ return gpiochip_add(chip); -+} -+ -+#else -+static int ssb_gpio_extif_init(struct ssb_bus *bus) -+{ -+ return -ENOTSUPP; -+} -+#endif -+ -+int ssb_gpio_init(struct ssb_bus *bus) -+{ -+ if (ssb_chipco_available(&bus->chipco)) -+ return ssb_gpio_chipco_init(bus); -+ else if (ssb_extif_available(&bus->extif)) -+ return ssb_gpio_extif_init(bus); -+ else -+ SSB_WARN_ON(1); -+ -+ return -1; -+} -+ -+int ssb_gpio_unregister(struct ssb_bus *bus) -+{ -+ if (ssb_chipco_available(&bus->chipco) || -+ ssb_extif_available(&bus->extif)) { -+ return gpiochip_remove(&bus->gpio); -+ } else { -+ SSB_WARN_ON(1); -+ } -+ -+ return -1; -+} ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -10,6 +10,7 @@ - - #include - -+#include - #include - #include - #include -@@ -17,6 +18,25 @@ - - #include "ssb_private.h" - -+static const char * const part_probes[] = { "bcm47xxpart", NULL }; -+ -+static struct physmap_flash_data ssb_pflash_data = { -+ .part_probe_types = part_probes, -+}; -+ -+static struct resource ssb_pflash_resource = { -+ .name = "ssb_pflash", -+ .flags = IORESOURCE_MEM, -+}; -+ -+struct platform_device ssb_pflash_dev = { -+ .name = "physmap-flash", -+ .dev = { -+ .platform_data = &ssb_pflash_data, -+ }, -+ .resource = &ssb_pflash_resource, -+ .num_resources = 1, -+}; - - static inline u32 mips_read32(struct ssb_mipscore *mcore, - u16 offset) -@@ -147,21 +167,22 @@ static void set_irq(struct ssb_device *d - irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]); - ssb_write32(mdev, SSB_IPSFLAG, irqflag); - } -- ssb_dprintk(KERN_INFO PFX -- "set_irq: core 0x%04x, irq %d => %d\n", -- dev->id.coreid, oldirq+2, irq+2); -+ ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n", -+ dev->id.coreid, oldirq+2, irq+2); - } - - static void print_irq(struct ssb_device *dev, unsigned int irq) - { -- int i; - static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; -- ssb_dprintk(KERN_INFO PFX -- "core 0x%04x, irq :", dev->id.coreid); -- for (i = 0; i <= 6; i++) { -- ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" "); -- } -- ssb_dprintk("\n"); -+ ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n", -+ dev->id.coreid, -+ irq_name[0], irq == 0 ? "*" : " ", -+ irq_name[1], irq == 1 ? "*" : " ", -+ irq_name[2], irq == 2 ? "*" : " ", -+ irq_name[3], irq == 3 ? "*" : " ", -+ irq_name[4], irq == 4 ? "*" : " ", -+ irq_name[5], irq == 5 ? "*" : " ", -+ irq_name[6], irq == 6 ? "*" : " "); - } - - static void dump_irq(struct ssb_bus *bus) -@@ -178,9 +199,9 @@ static void ssb_mips_serial_init(struct - { - struct ssb_bus *bus = mcore->dev->bus; - -- if (bus->extif.dev) -+ if (ssb_extif_available(&bus->extif)) - mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports); -- else if (bus->chipco.dev) -+ else if (ssb_chipco_available(&bus->chipco)) - mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports); - else - mcore->nr_serial_ports = 0; -@@ -189,17 +210,42 @@ static void ssb_mips_serial_init(struct - static void ssb_mips_flash_detect(struct ssb_mipscore *mcore) - { - struct ssb_bus *bus = mcore->dev->bus; -+ struct ssb_pflash *pflash = &mcore->pflash; - -- mcore->flash_buswidth = 2; -- if (bus->chipco.dev) { -- mcore->flash_window = 0x1c000000; -- mcore->flash_window_size = 0x02000000; -+ /* When there is no chipcommon on the bus there is 4MB flash */ -+ if (!ssb_chipco_available(&bus->chipco)) { -+ pflash->present = true; -+ pflash->buswidth = 2; -+ pflash->window = SSB_FLASH1; -+ pflash->window_size = SSB_FLASH1_SZ; -+ goto ssb_pflash; -+ } -+ -+ /* There is ChipCommon, so use it to read info about flash */ -+ switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) { -+ case SSB_CHIPCO_FLASHT_STSER: -+ case SSB_CHIPCO_FLASHT_ATSER: -+ pr_debug("Found serial flash\n"); -+ ssb_sflash_init(&bus->chipco); -+ break; -+ case SSB_CHIPCO_FLASHT_PARA: -+ pr_debug("Found parallel flash\n"); -+ pflash->present = true; -+ pflash->window = SSB_FLASH2; -+ pflash->window_size = SSB_FLASH2_SZ; - if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG) - & SSB_CHIPCO_CFG_DS16) == 0) -- mcore->flash_buswidth = 1; -- } else { -- mcore->flash_window = 0x1fc00000; -- mcore->flash_window_size = 0x00400000; -+ pflash->buswidth = 1; -+ else -+ pflash->buswidth = 2; -+ break; -+ } -+ -+ssb_pflash: -+ if (pflash->present) { -+ ssb_pflash_data.width = pflash->buswidth; -+ ssb_pflash_resource.start = pflash->window; -+ ssb_pflash_resource.end = pflash->window + pflash->window_size; - } - } - -@@ -208,9 +254,12 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m - struct ssb_bus *bus = mcore->dev->bus; - u32 pll_type, n, m, rate = 0; - -- if (bus->extif.dev) { -+ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) -+ return ssb_pmu_get_cpu_clock(&bus->chipco); -+ -+ if (ssb_extif_available(&bus->extif)) { - ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); -- } else if (bus->chipco.dev) { -+ } else if (ssb_chipco_available(&bus->chipco)) { - ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m); - } else - return 0; -@@ -238,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco - if (!mcore->dev) - return; /* We don't have a MIPS core */ - -- ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n"); -+ ssb_dbg("Initializing MIPS core...\n"); - - bus = mcore->dev->bus; - hz = ssb_clockspeed(bus); -@@ -246,9 +295,9 @@ void ssb_mipscore_init(struct ssb_mipsco - hz = 100000000; - ns = 1000000000 / hz; - -- if (bus->extif.dev) -+ if (ssb_extif_available(&bus->extif)) - ssb_extif_timing_init(&bus->extif, ns); -- else if (bus->chipco.dev) -+ else if (ssb_chipco_available(&bus->chipco)) - ssb_chipco_timing_init(&bus->chipco, ns); - - /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */ -@@ -286,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco - break; - } - } -- ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); -+ ssb_dbg("after irq reconfiguration\n"); - dump_irq(bus); - - ssb_mips_serial_init(mcore); ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci - return -ENODEV; - } - -- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", -- pci_name(d)); -+ ssb_info("PCI: Fixing up device %s\n", pci_name(d)); - - /* Fix up interrupt lines */ - d->irq = ssb_mips_irq(extpci_core->dev) + 2; -@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge( - if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) - return; - -- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev)); -+ ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev)); - - /* Enable PCI bridge bus mastering and memory space */ - pci_set_master(dev); - if (pcibios_enable_device(dev, ~0) < 0) { -- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n"); -+ ssb_err("PCI: SSB bridge enable failed\n"); - return; - } - -@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge( - - /* Make sure our latency is high enough to handle the devices behind us */ - lat = 168; -- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n", -- pci_name(dev), lat); -+ ssb_info("PCI: Fixing latency timer of device %s to %u\n", -+ pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); - } - DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge); -@@ -323,7 +322,7 @@ static void __devinit ssb_pcicore_init_h - return; - extpci_core = pc; - -- ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n"); -+ ssb_dbg("PCIcore in host mode found\n"); - /* Reset devices on the external PCI bus */ - val = SSB_PCICORE_CTL_RST_OE; - val |= SSB_PCICORE_CTL_CLK_OE; -@@ -338,7 +337,7 @@ static void __devinit ssb_pcicore_init_h - udelay(1); /* Assertion time demanded by the PCI standard */ - - if (pc->dev->bus->has_cardbus_slot) { -- ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n"); -+ ssb_dbg("CardBus slot detected\n"); - pc->cardbusmode = 1; - /* GPIO 1 resets the bridge */ - ssb_gpio_out(pc->dev->bus, 1, 1); ---- a/drivers/ssb/embedded.c -+++ b/drivers/ssb/embedded.c -@@ -4,11 +4,13 @@ - * - * Copyright 2005-2008, Broadcom Corporation - * Copyright 2006-2008, Michael Buesch -+ * Copyright 2012, Hauke Mehrtens - * - * Licensed under the GNU/GPL. See COPYING for details. - */ - - #include -+#include - #include - #include - #include -@@ -32,6 +34,38 @@ int ssb_watchdog_timer_set(struct ssb_bu - } - EXPORT_SYMBOL(ssb_watchdog_timer_set); - -+int ssb_watchdog_register(struct ssb_bus *bus) -+{ -+ struct bcm47xx_wdt wdt = {}; -+ struct platform_device *pdev; -+ -+ if (ssb_chipco_available(&bus->chipco)) { -+ wdt.driver_data = &bus->chipco; -+ wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt; -+ wdt.timer_set_ms = ssb_chipco_watchdog_timer_set_ms; -+ wdt.max_timer_ms = bus->chipco.max_timer_ms; -+ } else if (ssb_extif_available(&bus->extif)) { -+ wdt.driver_data = &bus->extif; -+ wdt.timer_set = ssb_extif_watchdog_timer_set_wdt; -+ wdt.timer_set_ms = ssb_extif_watchdog_timer_set_ms; -+ wdt.max_timer_ms = SSB_EXTIF_WATCHDOG_MAX_TIMER_MS; -+ } else { -+ return -ENODEV; -+ } -+ -+ pdev = platform_device_register_data(NULL, "bcm47xx-wdt", -+ bus->busnumber, &wdt, -+ sizeof(wdt)); -+ if (IS_ERR(pdev)) { -+ ssb_dbg("can not register watchdog device, err: %li\n", -+ PTR_ERR(pdev)); -+ return PTR_ERR(pdev); -+ } -+ -+ bus->watchdog = pdev; -+ return 0; -+} -+ - u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask) - { - unsigned long flags; ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -13,6 +13,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -289,8 +290,8 @@ int ssb_devices_thaw(struct ssb_freeze_c - - err = sdrv->probe(sdev, &sdev->id); - if (err) { -- ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n", -- dev_name(sdev->dev)); -+ ssb_err("Failed to thaw device %s\n", -+ dev_name(sdev->dev)); - result = err; - } - ssb_driver_put(sdrv); -@@ -449,10 +450,23 @@ static void ssb_devices_unregister(struc - if (sdev->dev) - device_unregister(sdev->dev); - } -+ -+#ifdef CONFIG_SSB_EMBEDDED -+ if (bus->bustype == SSB_BUSTYPE_SSB) -+ platform_device_unregister(bus->watchdog); -+#endif - } - - void ssb_bus_unregister(struct ssb_bus *bus) - { -+ int err; -+ -+ err = ssb_gpio_unregister(bus); -+ if (err == -EBUSY) -+ ssb_dbg("Some GPIOs are still in use\n"); -+ else if (err) -+ ssb_dbg("Can not unregister GPIO driver: %i\n", err); -+ - ssb_buses_lock(); - ssb_devices_unregister(bus); - list_del(&bus->list); -@@ -498,8 +512,7 @@ static int ssb_devices_register(struct s - - devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL); - if (!devwrap) { -- ssb_printk(KERN_ERR PFX -- "Could not allocate device\n"); -+ ssb_err("Could not allocate device\n"); - err = -ENOMEM; - goto error; - } -@@ -538,9 +551,7 @@ static int ssb_devices_register(struct s - sdev->dev = dev; - err = device_register(dev); - if (err) { -- ssb_printk(KERN_ERR PFX -- "Could not register %s\n", -- dev_name(dev)); -+ ssb_err("Could not register %s\n", dev_name(dev)); - /* Set dev to NULL to not unregister - * dev on error unwinding. */ - sdev->dev = NULL; -@@ -550,6 +561,22 @@ static int ssb_devices_register(struct s - dev_idx++; - } - -+#ifdef CONFIG_SSB_DRIVER_MIPS -+ if (bus->mipscore.pflash.present) { -+ err = platform_device_register(&ssb_pflash_dev); -+ if (err) -+ pr_err("Error registering parallel flash\n"); -+ } -+#endif -+ -+#ifdef CONFIG_SSB_SFLASH -+ if (bus->mipscore.sflash.present) { -+ err = platform_device_register(&ssb_sflash_dev); -+ if (err) -+ pr_err("Error registering serial flash\n"); -+ } -+#endif -+ - return 0; - error: - /* Unwind the already registered devices. */ -@@ -577,6 +604,8 @@ static int __devinit ssb_attach_queued_b - if (err) - goto error; - ssb_pcicore_init(&bus->pcicore); -+ if (bus->bustype == SSB_BUSTYPE_SSB) -+ ssb_watchdog_register(bus); - ssb_bus_may_powerdown(bus); - - err = ssb_devices_register(bus); -@@ -812,7 +841,13 @@ static int __devinit ssb_bus_register(st - if (err) - goto err_pcmcia_exit; - ssb_chipcommon_init(&bus->chipco); -+ ssb_extif_init(&bus->extif); - ssb_mipscore_init(&bus->mipscore); -+ err = ssb_gpio_init(bus); -+ if (err == -ENOTSUPP) -+ ssb_dbg("GPIO driver not activated\n"); -+ else if (err) -+ ssb_dbg("Error registering GPIO driver: %i\n", err); - err = ssb_fetch_invariants(bus, get_invariants); - if (err) { - ssb_bus_may_powerdown(bus); -@@ -863,11 +898,11 @@ int __devinit ssb_bus_pcibus_register(st - - err = ssb_bus_register(bus, ssb_pci_get_invariants, 0); - if (!err) { -- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " -- "PCI device %s\n", dev_name(&host_pci->dev)); -+ ssb_info("Sonics Silicon Backplane found on PCI device %s\n", -+ dev_name(&host_pci->dev)); - } else { -- ssb_printk(KERN_ERR PFX "Failed to register PCI version" -- " of SSB with error %d\n", err); -+ ssb_err("Failed to register PCI version of SSB with error %d\n", -+ err); - } - - return err; -@@ -888,8 +923,8 @@ int __devinit ssb_bus_pcmciabus_register - - err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr); - if (!err) { -- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " -- "PCMCIA device %s\n", pcmcia_dev->devname); -+ ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n", -+ pcmcia_dev->devname); - } - - return err; -@@ -911,8 +946,8 @@ int __devinit ssb_bus_sdiobus_register(s - - err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0); - if (!err) { -- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " -- "SDIO device %s\n", sdio_func_id(func)); -+ ssb_info("Sonics Silicon Backplane found on SDIO device %s\n", -+ sdio_func_id(func)); - } - - return err; -@@ -931,8 +966,8 @@ int __devinit ssb_bus_ssbbus_register(st - - err = ssb_bus_register(bus, get_invariants, baseaddr); - if (!err) { -- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at " -- "address 0x%08lX\n", baseaddr); -+ ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n", -+ baseaddr); - } - - return err; -@@ -1094,6 +1129,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) - u32 plltype; - u32 clkctl_n, clkctl_m; - -+ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) -+ return ssb_pmu_get_controlclock(&bus->chipco); -+ - if (ssb_extif_available(&bus->extif)) - ssb_extif_get_clockcontrol(&bus->extif, &plltype, - &clkctl_n, &clkctl_m); -@@ -1131,8 +1169,7 @@ static u32 ssb_tmslow_reject_bitmask(str - case SSB_IDLOW_SSBREV_27: /* same here */ - return SSB_TMSLOW_REJECT; /* this is a guess */ - default: -- printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev); -- WARN_ON(1); -+ WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev); - } - return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23); - } -@@ -1324,7 +1361,7 @@ out: - #endif - return err; - error: -- ssb_printk(KERN_ERR PFX "Bus powerdown failed\n"); -+ ssb_err("Bus powerdown failed\n"); - goto out; - } - EXPORT_SYMBOL(ssb_bus_may_powerdown); -@@ -1347,7 +1384,7 @@ int ssb_bus_powerup(struct ssb_bus *bus, - - return 0; - error: -- ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -+ ssb_err("Bus powerup failed\n"); - return err; - } - EXPORT_SYMBOL(ssb_bus_powerup); -@@ -1455,15 +1492,13 @@ static int __init ssb_modinit(void) - - err = b43_pci_ssb_bridge_init(); - if (err) { -- ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge " -- "initialization failed\n"); -+ ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n"); - /* don't fail SSB init because of this */ - err = 0; - } - err = ssb_gige_init(); - if (err) { -- ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet " -- "driver initialization failed\n"); -+ ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n"); - /* don't fail SSB init because of this */ - err = 0; - } ---- a/drivers/ssb/pci.c -+++ b/drivers/ssb/pci.c -@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu - } - return 0; - error: -- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx); -+ ssb_err("Failed to switch to core %u\n", coreidx); - return -ENODEV; - } - -@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus * - unsigned long flags; - - #if SSB_VERBOSE_PCICORESWITCH_DEBUG -- ssb_printk(KERN_INFO PFX -- "Switching to %s core, index %d\n", -- ssb_core_name(dev->id.coreid), -- dev->core_index); -+ ssb_info("Switching to %s core, index %d\n", -+ ssb_core_name(dev->id.coreid), -+ dev->core_index); - #endif - - spin_lock_irqsave(&bus->bar_lock, flags); -@@ -178,6 +177,18 @@ err_pci: - #define SPEX(_outvar, _offset, _mask, _shift) \ - SPEX16(_outvar, _offset, _mask, _shift) - -+#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \ -+ do { \ -+ SPEX(_field[0], _offset + 0, _mask, _shift); \ -+ SPEX(_field[1], _offset + 2, _mask, _shift); \ -+ SPEX(_field[2], _offset + 4, _mask, _shift); \ -+ SPEX(_field[3], _offset + 6, _mask, _shift); \ -+ SPEX(_field[4], _offset + 8, _mask, _shift); \ -+ SPEX(_field[5], _offset + 10, _mask, _shift); \ -+ SPEX(_field[6], _offset + 12, _mask, _shift); \ -+ SPEX(_field[7], _offset + 14, _mask, _shift); \ -+ } while (0) -+ - - static inline u8 ssb_crc8(u8 crc, u8 data) - { -@@ -219,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat - return t[crc ^ data]; - } - -+static void sprom_get_mac(char *mac, const u16 *in) -+{ -+ int i; -+ for (i = 0; i < 3; i++) { -+ *mac++ = in[i] >> 8; -+ *mac++ = in[i]; -+ } -+} -+ - static u8 ssb_sprom_crc(const u16 *sprom, u16 size) - { - int word; -@@ -266,7 +286,7 @@ static int sprom_do_write(struct ssb_bus - u32 spromctl; - u16 size = bus->sprom_size; - -- ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n"); -+ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n"); - err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl); - if (err) - goto err_ctlreg; -@@ -274,17 +294,17 @@ static int sprom_do_write(struct ssb_bus - err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl); - if (err) - goto err_ctlreg; -- ssb_printk(KERN_NOTICE PFX "[ 0%%"); -+ ssb_notice("[ 0%%"); - msleep(500); - for (i = 0; i < size; i++) { - if (i == size / 4) -- ssb_printk("25%%"); -+ ssb_cont("25%%"); - else if (i == size / 2) -- ssb_printk("50%%"); -+ ssb_cont("50%%"); - else if (i == (size * 3) / 4) -- ssb_printk("75%%"); -+ ssb_cont("75%%"); - else if (i % 2) -- ssb_printk("."); -+ ssb_cont("."); - writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2)); - mmiowb(); - msleep(20); -@@ -297,12 +317,12 @@ static int sprom_do_write(struct ssb_bus - if (err) - goto err_ctlreg; - msleep(500); -- ssb_printk("100%% ]\n"); -- ssb_printk(KERN_NOTICE PFX "SPROM written.\n"); -+ ssb_cont("100%% ]\n"); -+ ssb_notice("SPROM written\n"); - - return 0; - err_ctlreg: -- ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n"); -+ ssb_err("Could not access SPROM control register.\n"); - return err; - } - -@@ -327,11 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_ - return (s8)gain; - } - -+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in) -+{ -+ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); -+ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0); -+ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0); -+ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0); -+ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0); -+ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0); -+ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0); -+ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0); -+ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0); -+ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO, -+ SSB_SPROM2_MAXP_A_LO_SHIFT); -+} -+ - static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in) - { -- int i; -- u16 v; -- s8 gain; - u16 loc[3]; - - if (out->revision == 3) /* rev 3 moved MAC */ -@@ -341,19 +373,10 @@ static void sprom_extract_r123(struct ss - loc[1] = SSB_SPROM1_ET0MAC; - loc[2] = SSB_SPROM1_ET1MAC; - } -- for (i = 0; i < 3; i++) { -- v = in[SPOFF(loc[0]) + i]; -- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); -- } -+ sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]); - if (out->revision < 3) { /* only rev 1-2 have et0, et1 */ -- for (i = 0; i < 3; i++) { -- v = in[SPOFF(loc[1]) + i]; -- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v); -- } -- for (i = 0; i < 3; i++) { -- v = in[SPOFF(loc[2]) + i]; -- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v); -- } -+ sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]); -+ sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]); - } - SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0); - SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A, -@@ -361,8 +384,10 @@ static void sprom_extract_r123(struct ss - SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14); - SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15); - SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0); -- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, -- SSB_SPROM1_BINF_CCODE_SHIFT); -+ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0); -+ if (out->revision == 1) -+ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, -+ SSB_SPROM1_BINF_CCODE_SHIFT); - SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA, - SSB_SPROM1_BINF_ANTA_SHIFT); - SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG, -@@ -386,24 +411,19 @@ static void sprom_extract_r123(struct ss - SSB_SPROM1_ITSSI_A_SHIFT); - SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0); - SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0); -- if (out->revision >= 2) -- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); -+ -+ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8); -+ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0); - - /* Extract the antenna gain values. */ -- gain = r123_extract_antgain(out->revision, in, -- SSB_SPROM1_AGAIN_BG, -- SSB_SPROM1_AGAIN_BG_SHIFT); -- out->antenna_gain.ghz24.a0 = gain; -- out->antenna_gain.ghz24.a1 = gain; -- out->antenna_gain.ghz24.a2 = gain; -- out->antenna_gain.ghz24.a3 = gain; -- gain = r123_extract_antgain(out->revision, in, -- SSB_SPROM1_AGAIN_A, -- SSB_SPROM1_AGAIN_A_SHIFT); -- out->antenna_gain.ghz5.a0 = gain; -- out->antenna_gain.ghz5.a1 = gain; -- out->antenna_gain.ghz5.a2 = gain; -- out->antenna_gain.ghz5.a3 = gain; -+ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in, -+ SSB_SPROM1_AGAIN_BG, -+ SSB_SPROM1_AGAIN_BG_SHIFT); -+ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, -+ SSB_SPROM1_AGAIN_A, -+ SSB_SPROM1_AGAIN_A_SHIFT); -+ if (out->revision >= 2) -+ sprom_extract_r23(out, in); - } - - /* Revs 4 5 and 8 have partially shared layout */ -@@ -448,30 +468,30 @@ static void sprom_extract_r458(struct ss - - static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) - { -- int i; -- u16 v; - u16 il0mac_offset; - - if (out->revision == 4) - il0mac_offset = SSB_SPROM4_IL0MAC; - else - il0mac_offset = SSB_SPROM5_IL0MAC; -- /* extract the MAC address */ -- for (i = 0; i < 3; i++) { -- v = in[SPOFF(il0mac_offset) + i]; -- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); -- } -+ -+ sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]); -+ - SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0); - SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A, - SSB_SPROM4_ETHPHY_ET1A_SHIFT); -+ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0); -+ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0); - if (out->revision == 4) { -- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); -+ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8); -+ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0); - SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); - SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); - SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0); - SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0); - } else { -- SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0); -+ SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8); -+ SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0); - SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0); - SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0); - SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0); -@@ -504,16 +524,14 @@ static void sprom_extract_r45(struct ssb - } - - /* Extract the antenna gain values. */ -- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, -+ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01, - SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); -- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, -+ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01, - SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); -- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, -+ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23, - SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); -- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, -+ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23, - SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); -- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, -- sizeof(out->antenna_gain.ghz5)); - - sprom_extract_r458(out, in); - -@@ -523,14 +541,21 @@ static void sprom_extract_r45(struct ssb - static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) - { - int i; -- u16 v; -+ u16 o; -+ u16 pwr_info_offset[] = { -+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, -+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 -+ }; -+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != -+ ARRAY_SIZE(out->core_pwr_info)); - - /* extract the MAC address */ -- for (i = 0; i < 3; i++) { -- v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; -- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); -- } -- SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0); -+ sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]); -+ -+ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0); -+ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0); -+ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8); -+ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0); - SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); - SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); - SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); -@@ -596,16 +621,46 @@ static void sprom_extract_r8(struct ssb_ - SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); - - /* Extract the antenna gain values. */ -- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, -+ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, - SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); -- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, -+ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, - SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); -- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, -+ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, - SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); -- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, -+ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, - SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); -- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, -- sizeof(out->antenna_gain.ghz5)); -+ -+ /* Extract cores power info info */ -+ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { -+ o = pwr_info_offset[i]; -+ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, -+ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); -+ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, -+ SSB_SPROM8_2G_MAXP, 0); -+ -+ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); -+ -+ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, -+ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); -+ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, -+ SSB_SPROM8_5G_MAXP, 0); -+ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, -+ SSB_SPROM8_5GH_MAXP, 0); -+ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, -+ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); -+ -+ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); -+ } - - /* Extract FEM info */ - SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, -@@ -630,6 +685,63 @@ static void sprom_extract_r8(struct ssb_ - SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, - SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); - -+ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON, -+ SSB_SPROM8_LEDDC_ON_SHIFT); -+ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF, -+ SSB_SPROM8_LEDDC_OFF_SHIFT); -+ -+ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN, -+ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT); -+ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN, -+ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT); -+ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH, -+ SSB_SPROM8_TXRXC_SWITCH_SHIFT); -+ -+ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0); -+ -+ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0); -+ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0); -+ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0); -+ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0); -+ -+ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP, -+ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT); -+ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER, -+ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT); -+ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX, -+ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE, -+ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT); -+ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX, -+ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT); -+ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX, -+ SSB_SPROM8_OPT_CORRX_TEMP_OPTION, -+ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT); -+ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP, -+ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR, -+ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT); -+ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP, -+ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP, -+ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT); -+ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL, -+ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT); -+ -+ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0); -+ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0); -+ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0); -+ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0); -+ -+ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH, -+ SSB_SPROM8_THERMAL_TRESH_SHIFT); -+ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET, -+ SSB_SPROM8_THERMAL_OFFSET_SHIFT); -+ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA, -+ SSB_SPROM8_TEMPDELTA_PHYCAL, -+ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT); -+ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD, -+ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT); -+ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA, -+ SSB_SPROM8_TEMPDELTA_HYSTERESIS, -+ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT); - sprom_extract_r458(out, in); - - /* TODO - get remaining rev 8 stuff needed */ -@@ -641,7 +753,7 @@ static int sprom_extract(struct ssb_bus - memset(out, 0, sizeof(*out)); - - out->revision = in[size - 1] & 0x00FF; -- ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); -+ ssb_dbg("SPROM revision %d detected\n", out->revision); - memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ - memset(out->et1mac, 0xFF, 6); - -@@ -650,7 +762,7 @@ static int sprom_extract(struct ssb_bus - * number stored in the SPROM. - * Always extract r1. */ - out->revision = 1; -- ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision); -+ ssb_dbg("SPROM treated as revision %d\n", out->revision); - } - - switch (out->revision) { -@@ -667,9 +779,8 @@ static int sprom_extract(struct ssb_bus - sprom_extract_r8(out, in); - break; - default: -- ssb_printk(KERN_WARNING PFX "Unsupported SPROM" -- " revision %d detected. Will extract" -- " v1\n", out->revision); -+ ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n", -+ out->revision); - out->revision = 1; - sprom_extract_r123(out, in); - } -@@ -689,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_ - u16 *buf; - - if (!ssb_is_sprom_available(bus)) { -- ssb_printk(KERN_ERR PFX "No SPROM available!\n"); -+ ssb_err("No SPROM available!\n"); - return -ENODEV; - } - if (bus->chipco.dev) { /* can be unavailable! */ -@@ -708,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_ - } else { - bus->sprom_offset = SSB_SPROM_BASE1; - } -- ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset); -+ ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset); - - buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); - if (!buf) -@@ -733,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_ - * available for this device in some other storage */ - err = ssb_fill_sprom_with_fallback(bus, sprom); - if (err) { -- ssb_printk(KERN_WARNING PFX "WARNING: Using" -- " fallback SPROM failed (err %d)\n", -- err); -+ ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n", -+ err); - } else { -- ssb_dprintk(KERN_DEBUG PFX "Using SPROM" -- " revision %d provided by" -- " platform.\n", sprom->revision); -+ ssb_dbg("Using SPROM revision %d provided by platform\n", -+ sprom->revision); - err = 0; - goto out_free; - } -- ssb_printk(KERN_WARNING PFX "WARNING: Invalid" -- " SPROM CRC (corrupt SPROM)\n"); -+ ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n"); - } - } - err = sprom_extract(bus, sprom, buf, bus->sprom_size); -@@ -759,7 +867,6 @@ static void ssb_pci_get_boardinfo(struct - { - bi->vendor = bus->host_pci->subsystem_vendor; - bi->type = bus->host_pci->subsystem_device; -- bi->rev = bus->host_pci->revision; - } - - int ssb_pci_get_invariants(struct ssb_bus *bus, ---- a/drivers/ssb/pcihost_wrapper.c -+++ b/drivers/ssb/pcihost_wrapper.c -@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci - struct ssb_bus *ssb = pci_get_drvdata(dev); - int err; - -- pci_set_power_state(dev, 0); -+ pci_set_power_state(dev, PCI_D0); - err = pci_enable_device(dev); - if (err) - return err; ---- a/drivers/ssb/pcmcia.c -+++ b/drivers/ssb/pcmcia.c -@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb - - return 0; - error: -- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx); -+ ssb_err("Failed to switch to core %u\n", coreidx); - return err; - } - -@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu - int err; - - #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG -- ssb_printk(KERN_INFO PFX -- "Switching to %s core, index %d\n", -- ssb_core_name(dev->id.coreid), -- dev->core_index); -+ ssb_info("Switching to %s core, index %d\n", -+ ssb_core_name(dev->id.coreid), -+ dev->core_index); - #endif - - err = ssb_pcmcia_switch_coreidx(bus, dev->core_index); -@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb - - return 0; - error: -- ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n"); -+ ssb_err("Failed to switch pcmcia segment\n"); - return err; - } - -@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st - bool failed = 0; - size_t size = SSB_PCMCIA_SPROM_SIZE; - -- ssb_printk(KERN_NOTICE PFX -- "Writing SPROM. Do NOT turn off the power! " -- "Please stand by...\n"); -+ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n"); - err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN); - if (err) { -- ssb_printk(KERN_NOTICE PFX -- "Could not enable SPROM write access.\n"); -+ ssb_notice("Could not enable SPROM write access\n"); - return -EBUSY; - } -- ssb_printk(KERN_NOTICE PFX "[ 0%%"); -+ ssb_notice("[ 0%%"); - msleep(500); - for (i = 0; i < size; i++) { - if (i == size / 4) -- ssb_printk("25%%"); -+ ssb_cont("25%%"); - else if (i == size / 2) -- ssb_printk("50%%"); -+ ssb_cont("50%%"); - else if (i == (size * 3) / 4) -- ssb_printk("75%%"); -+ ssb_cont("75%%"); - else if (i % 2) -- ssb_printk("."); -+ ssb_cont("."); - err = ssb_pcmcia_sprom_write(bus, i, sprom[i]); - if (err) { -- ssb_printk(KERN_NOTICE PFX -- "Failed to write to SPROM.\n"); -+ ssb_notice("Failed to write to SPROM\n"); - failed = 1; - break; - } - } - err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS); - if (err) { -- ssb_printk(KERN_NOTICE PFX -- "Could not disable SPROM write access.\n"); -+ ssb_notice("Could not disable SPROM write access\n"); - failed = 1; - } - msleep(500); - if (!failed) { -- ssb_printk("100%% ]\n"); -- ssb_printk(KERN_NOTICE PFX "SPROM written.\n"); -+ ssb_cont("100%% ]\n"); -+ ssb_notice("SPROM written\n"); - } - - return failed ? -EBUSY : 0; -@@ -676,14 +670,10 @@ static int ssb_pcmcia_do_get_invariants( - case SSB_PCMCIA_CIS_ANTGAIN: - GOTO_ERROR_ON(tuple->TupleDataLen != 2, - "antg tpl size"); -- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; -- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; -- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; -- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; -- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; -- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; -- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; -- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; -+ sprom->antenna_gain.a0 = tuple->TupleData[1]; -+ sprom->antenna_gain.a1 = tuple->TupleData[1]; -+ sprom->antenna_gain.a2 = tuple->TupleData[1]; -+ sprom->antenna_gain.a3 = tuple->TupleData[1]; - break; - case SSB_PCMCIA_CIS_BFLAGS: - GOTO_ERROR_ON((tuple->TupleDataLen != 3) && -@@ -704,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants( - return -ENOSPC; /* continue with next entry */ - - error: -- ssb_printk(KERN_ERR PFX -+ ssb_err( - "PCMCIA: Failed to fetch device invariants: %s\n", - error_description); - return -ENODEV; -@@ -726,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb - res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE, - ssb_pcmcia_get_mac, sprom); - if (res != 0) { -- ssb_printk(KERN_ERR PFX -+ ssb_err( - "PCMCIA: Failed to fetch MAC address\n"); - return -ENODEV; - } -@@ -737,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb - if ((res == 0) || (res == -ENOSPC)) - return 0; - -- ssb_printk(KERN_ERR PFX -+ ssb_err( - "PCMCIA: Failed to fetch device invariants\n"); - return -ENODEV; - } -@@ -847,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus) - - return 0; - error: -- ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n"); -+ ssb_err("Failed to initialize PCMCIA host device\n"); - return err; - } ---- a/drivers/ssb/scan.c -+++ b/drivers/ssb/scan.c -@@ -90,6 +90,8 @@ const char *ssb_core_name(u16 coreid) - return "ARM 1176"; - case SSB_DEV_ARM_7TDMI: - return "ARM 7TDMI"; -+ case SSB_DEV_ARM_CM3: -+ return "ARM Cortex M3"; - } - return "UNKNOWN"; - } -@@ -123,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d - chipid_fallback = 0x4401; - break; - default: -- ssb_printk(KERN_ERR PFX -- "PCI-ID not in fallback list\n"); -+ ssb_err("PCI-ID not in fallback list\n"); - } - - return chipid_fallback; -@@ -150,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid) - case 0x4704: - return 9; - default: -- ssb_printk(KERN_ERR PFX -- "CHIPID not in nrcores fallback list\n"); -+ ssb_err("CHIPID not in nrcores fallback list\n"); - } - - return 1; -@@ -318,12 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus, - bus->chip_package = 0; - } - } -+ ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", -+ bus->chip_id, bus->chip_rev, bus->chip_package); - if (!bus->nr_devices) - bus->nr_devices = chipid_to_nrcores(bus->chip_id); - if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { -- ssb_printk(KERN_ERR PFX -- "More than %d ssb cores found (%d)\n", -- SSB_MAX_NR_CORES, bus->nr_devices); -+ ssb_err("More than %d ssb cores found (%d)\n", -+ SSB_MAX_NR_CORES, bus->nr_devices); - goto err_unmap; - } - if (bus->bustype == SSB_BUSTYPE_SSB) { -@@ -365,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus, - nr_80211_cores++; - if (nr_80211_cores > 1) { - if (!we_support_multiple_80211_cores(bus)) { -- ssb_dprintk(KERN_INFO PFX "Ignoring additional " -- "802.11 core\n"); -+ ssb_dbg("Ignoring additional 802.11 core\n"); - continue; - } - } -@@ -374,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus, - case SSB_DEV_EXTIF: - #ifdef CONFIG_SSB_DRIVER_EXTIF - if (bus->extif.dev) { -- ssb_printk(KERN_WARNING PFX -- "WARNING: Multiple EXTIFs found\n"); -+ ssb_warn("WARNING: Multiple EXTIFs found\n"); - break; - } - bus->extif.dev = dev; -@@ -383,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus, - break; - case SSB_DEV_CHIPCOMMON: - if (bus->chipco.dev) { -- ssb_printk(KERN_WARNING PFX -- "WARNING: Multiple ChipCommon found\n"); -+ ssb_warn("WARNING: Multiple ChipCommon found\n"); - break; - } - bus->chipco.dev = dev; -@@ -393,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus, - case SSB_DEV_MIPS_3302: - #ifdef CONFIG_SSB_DRIVER_MIPS - if (bus->mipscore.dev) { -- ssb_printk(KERN_WARNING PFX -- "WARNING: Multiple MIPS cores found\n"); -+ ssb_warn("WARNING: Multiple MIPS cores found\n"); - break; - } - bus->mipscore.dev = dev; -@@ -415,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus, - } - } - if (bus->pcicore.dev) { -- ssb_printk(KERN_WARNING PFX -- "WARNING: Multiple PCI(E) cores found\n"); -+ ssb_warn("WARNING: Multiple PCI(E) cores found\n"); - break; - } - bus->pcicore.dev = dev; ---- a/drivers/ssb/sdio.c -+++ b/drivers/ssb/sdio.c -@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b - case SSB_SDIO_CIS_ANTGAIN: - GOTO_ERROR_ON(tuple->size != 2, - "antg tpl size"); -- sprom->antenna_gain.ghz24.a0 = tuple->data[1]; -- sprom->antenna_gain.ghz24.a1 = tuple->data[1]; -- sprom->antenna_gain.ghz24.a2 = tuple->data[1]; -- sprom->antenna_gain.ghz24.a3 = tuple->data[1]; -- sprom->antenna_gain.ghz5.a0 = tuple->data[1]; -- sprom->antenna_gain.ghz5.a1 = tuple->data[1]; -- sprom->antenna_gain.ghz5.a2 = tuple->data[1]; -- sprom->antenna_gain.ghz5.a3 = tuple->data[1]; -+ sprom->antenna_gain.a0 = tuple->data[1]; -+ sprom->antenna_gain.a1 = tuple->data[1]; -+ sprom->antenna_gain.a2 = tuple->data[1]; -+ sprom->antenna_gain.a3 = tuple->data[1]; - break; - case SSB_SDIO_CIS_BFLAGS: - GOTO_ERROR_ON((tuple->size != 3) && ---- a/drivers/ssb/sprom.c -+++ b/drivers/ssb/sprom.c -@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c - while (cnt < sprom_size_words) { - memcpy(tmp, dump, 4); - dump += 4; -- err = strict_strtoul(tmp, 16, &parsed); -+ err = kstrtoul(tmp, 16, &parsed); - if (err) - return err; - sprom[cnt++] = swab16((u16)parsed); -@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_ - goto out_kfree; - err = ssb_devices_freeze(bus, &freeze); - if (err) { -- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n"); -+ ssb_err("SPROM write: Could not freeze all devices\n"); - goto out_unlock; - } - res = sprom_write(bus, sprom); - err = ssb_devices_thaw(&freeze); - if (err) -- ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n"); -+ ssb_err("SPROM write: Could not thaw all devices\n"); - out_unlock: - mutex_unlock(&bus->sprom_mutex); - out_kfree: ---- a/drivers/ssb/ssb_private.h -+++ b/drivers/ssb/ssb_private.h -@@ -3,21 +3,33 @@ - - #include - #include -+#include - - - #define PFX "ssb: " - - #ifdef CONFIG_SSB_SILENT --# define ssb_printk(fmt, x...) do { /* nothing */ } while (0) -+# define ssb_printk(fmt, ...) \ -+ do { if (0) printk(fmt, ##__VA_ARGS__); } while (0) - #else --# define ssb_printk printk -+# define ssb_printk(fmt, ...) \ -+ printk(fmt, ##__VA_ARGS__) - #endif /* CONFIG_SSB_SILENT */ - -+#define ssb_emerg(fmt, ...) ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__) -+#define ssb_err(fmt, ...) ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__) -+#define ssb_warn(fmt, ...) ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__) -+#define ssb_notice(fmt, ...) ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__) -+#define ssb_info(fmt, ...) ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__) -+#define ssb_cont(fmt, ...) ssb_printk(KERN_CONT fmt, ##__VA_ARGS__) -+ - /* dprintk: Debugging printk; vanishes for non-debug compilation */ - #ifdef CONFIG_SSB_DEBUG --# define ssb_dprintk(fmt, x...) ssb_printk(fmt , ##x) -+# define ssb_dbg(fmt, ...) \ -+ ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__) - #else --# define ssb_dprintk(fmt, x...) do { /* nothing */ } while (0) -+# define ssb_dbg(fmt, ...) \ -+ do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0) - #endif - - #ifdef CONFIG_SSB_DEBUG -@@ -207,4 +219,79 @@ static inline void b43_pci_ssb_bridge_ex - } - #endif /* CONFIG_SSB_B43_PCI_BRIDGE */ - -+/* driver_chipcommon_pmu.c */ -+extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); -+extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); -+extern u32 ssb_pmu_get_alp_clock(struct ssb_chipcommon *cc); -+ -+extern u32 ssb_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, -+ u32 ticks); -+extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms); -+ -+/* driver_chipcommon_sflash.c */ -+#ifdef CONFIG_SSB_SFLASH -+int ssb_sflash_init(struct ssb_chipcommon *cc); -+#else -+static inline int ssb_sflash_init(struct ssb_chipcommon *cc) -+{ -+ pr_err("Serial flash not supported\n"); -+ return 0; -+} -+#endif /* CONFIG_SSB_SFLASH */ -+ -+#ifdef CONFIG_SSB_DRIVER_MIPS -+extern struct platform_device ssb_pflash_dev; -+#endif -+ -+#ifdef CONFIG_SSB_SFLASH -+extern struct platform_device ssb_sflash_dev; -+#endif -+ -+#ifdef CONFIG_SSB_DRIVER_EXTIF -+extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks); -+extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms); -+#else -+static inline u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, -+ u32 ticks) -+{ -+ return 0; -+} -+static inline u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, -+ u32 ms) -+{ -+ return 0; -+} -+#endif -+ -+#ifdef CONFIG_SSB_EMBEDDED -+extern int ssb_watchdog_register(struct ssb_bus *bus); -+#else /* CONFIG_SSB_EMBEDDED */ -+static inline int ssb_watchdog_register(struct ssb_bus *bus) -+{ -+ return 0; -+} -+#endif /* CONFIG_SSB_EMBEDDED */ -+ -+#ifdef CONFIG_SSB_DRIVER_EXTIF -+extern void ssb_extif_init(struct ssb_extif *extif); -+#else -+static inline void ssb_extif_init(struct ssb_extif *extif) -+{ -+} -+#endif -+ -+#ifdef CONFIG_SSB_DRIVER_GPIO -+extern int ssb_gpio_init(struct ssb_bus *bus); -+extern int ssb_gpio_unregister(struct ssb_bus *bus); -+#else /* CONFIG_SSB_DRIVER_GPIO */ -+static inline int ssb_gpio_init(struct ssb_bus *bus) -+{ -+ return -ENOTSUPP; -+} -+static inline int ssb_gpio_unregister(struct ssb_bus *bus) -+{ -+ return 0; -+} -+#endif /* CONFIG_SSB_DRIVER_GPIO */ -+ - #endif /* LINUX_SSB_PRIVATE_H_ */ ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -6,8 +6,10 @@ - #include - #include - #include -+#include - #include - #include -+#include - - #include - -@@ -16,19 +18,29 @@ struct pcmcia_device; - struct ssb_bus; - struct ssb_driver; - -+struct ssb_sprom_core_pwr_info { -+ u8 itssi_2g, itssi_5g; -+ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -+ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; -+}; -+ - struct ssb_sprom { - u8 revision; -- u8 il0mac[6]; /* MAC address for 802.11b/g */ -- u8 et0mac[6]; /* MAC address for Ethernet */ -- u8 et1mac[6]; /* MAC address for 802.11a */ -+ u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */ -+ u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */ -+ u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */ - u8 et0phyaddr; /* MII address for enet0 */ - u8 et1phyaddr; /* MII address for enet1 */ - u8 et0mdcport; /* MDIO for enet0 */ - u8 et1mdcport; /* MDIO for enet1 */ -+ u16 dev_id; /* Device ID overriding e.g. PCI ID */ - u16 board_rev; /* Board revision number from SPROM. */ -+ u16 board_num; /* Board number from SPROM. */ -+ u16 board_type; /* Board type from SPROM. */ - u8 country_code; /* Country Code */ -- u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -- u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ -+ char alpha2[2]; /* Country Code as two chars like EU or US */ -+ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -+ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ - u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ - u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ - u16 pa0b0; -@@ -47,10 +59,10 @@ struct ssb_sprom { - u8 gpio1; /* GPIO pin 1 */ - u8 gpio2; /* GPIO pin 2 */ - u8 gpio3; /* GPIO pin 3 */ -- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ -- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ -- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ -- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ -+ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ -+ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ -+ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ -+ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ - u8 itssi_a; /* Idle TSSI Target for A-PHY */ - u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ - u8 tri2g; /* 2.4GHz TX isolation */ -@@ -61,8 +73,8 @@ struct ssb_sprom { - u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ - u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ - u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ -- u8 rxpo2g; /* 2GHz RX power offset */ -- u8 rxpo5g; /* 5GHz RX power offset */ -+ s8 rxpo2g; /* 2GHz RX power offset */ -+ s8 rxpo5g; /* 5GHz RX power offset */ - u8 rssisav2g; /* 2GHz RSSI params */ - u8 rssismc2g; - u8 rssismf2g; -@@ -82,16 +94,13 @@ struct ssb_sprom { - u16 boardflags2_hi; /* Board flags (bits 48-63) */ - /* TODO store board flags in a single u64 */ - -+ struct ssb_sprom_core_pwr_info core_pwr_info[4]; -+ - /* Antenna gain values for up to 4 antennas - * on each band. Values in dBm/4 (Q5.2). Negative gain means the - * loss in the connectors is bigger than the gain. */ - struct { -- struct { -- s8 a0, a1, a2, a3; -- } ghz24; /* 2.4GHz band */ -- struct { -- s8 a0, a1, a2, a3; -- } ghz5; /* 5GHz band */ -+ s8 a0, a1, a2, a3; - } antenna_gain; - - struct { -@@ -103,14 +112,85 @@ struct ssb_sprom { - } ghz5; - } fem; - -- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ -+ u16 mcs2gpo[8]; -+ u16 mcs5gpo[8]; -+ u16 mcs5glpo[8]; -+ u16 mcs5ghpo[8]; -+ u8 opo; -+ -+ u8 rxgainerr2ga[3]; -+ u8 rxgainerr5gla[3]; -+ u8 rxgainerr5gma[3]; -+ u8 rxgainerr5gha[3]; -+ u8 rxgainerr5gua[3]; -+ -+ u8 noiselvl2ga[3]; -+ u8 noiselvl5gla[3]; -+ u8 noiselvl5gma[3]; -+ u8 noiselvl5gha[3]; -+ u8 noiselvl5gua[3]; -+ -+ u8 regrev; -+ u8 txchain; -+ u8 rxchain; -+ u8 antswitch; -+ u16 cddpo; -+ u16 stbcpo; -+ u16 bw40po; -+ u16 bwduppo; -+ -+ u8 tempthresh; -+ u8 tempoffset; -+ u16 rawtempsense; -+ u8 measpower; -+ u8 tempsense_slope; -+ u8 tempcorrx; -+ u8 tempsense_option; -+ u8 freqoffset_corr; -+ u8 iqcal_swp_dis; -+ u8 hw_iqcal_en; -+ u8 elna2g; -+ u8 elna5g; -+ u8 phycal_tempdelta; -+ u8 temps_period; -+ u8 temps_hysteresis; -+ u8 measpower1; -+ u8 measpower2; -+ u8 pcieingress_war; -+ -+ /* power per rate from sromrev 9 */ -+ u16 cckbw202gpo; -+ u16 cckbw20ul2gpo; -+ u32 legofdmbw202gpo; -+ u32 legofdmbw20ul2gpo; -+ u32 legofdmbw205glpo; -+ u32 legofdmbw20ul5glpo; -+ u32 legofdmbw205gmpo; -+ u32 legofdmbw20ul5gmpo; -+ u32 legofdmbw205ghpo; -+ u32 legofdmbw20ul5ghpo; -+ u32 mcsbw202gpo; -+ u32 mcsbw20ul2gpo; -+ u32 mcsbw402gpo; -+ u32 mcsbw205glpo; -+ u32 mcsbw20ul5glpo; -+ u32 mcsbw405glpo; -+ u32 mcsbw205gmpo; -+ u32 mcsbw20ul5gmpo; -+ u32 mcsbw405gmpo; -+ u32 mcsbw205ghpo; -+ u32 mcsbw20ul5ghpo; -+ u32 mcsbw405ghpo; -+ u16 mcs32po; -+ u16 legofdm40duppo; -+ u8 sar2g; -+ u8 sar5g; - }; - - /* Information about the PCB the circuitry is soldered on. */ - struct ssb_boardinfo { - u16 vendor; - u16 type; -- u8 rev; - }; - - -@@ -166,6 +246,7 @@ struct ssb_bus_ops { - #define SSB_DEV_MINI_MACPHY 0x823 - #define SSB_DEV_ARM_1176 0x824 - #define SSB_DEV_ARM_7TDMI 0x825 -+#define SSB_DEV_ARM_CM3 0x82A - - /* Vendor-ID values */ - #define SSB_VENDOR_BROADCOM 0x4243 -@@ -260,13 +341,61 @@ enum ssb_bustype { - #define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */ - #define SSB_BOARDVENDOR_HP 0x0E11 /* HP */ - /* board_type */ -+#define SSB_BOARD_BCM94301CB 0x0406 -+#define SSB_BOARD_BCM94301MP 0x0407 -+#define SSB_BOARD_BU4309 0x040A -+#define SSB_BOARD_BCM94309CB 0x040B -+#define SSB_BOARD_BCM4309MP 0x040C -+#define SSB_BOARD_BU4306 0x0416 - #define SSB_BOARD_BCM94306MP 0x0418 - #define SSB_BOARD_BCM4309G 0x0421 - #define SSB_BOARD_BCM4306CB 0x0417 --#define SSB_BOARD_BCM4309MP 0x040C -+#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */ -+#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */ -+#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */ -+#define SSB_BOARD_BU4704SD 0x042E /* with sdram */ -+#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */ -+#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */ -+#define SSB_BOARD_BU4318 0x0447 -+#define SSB_BOARD_CB4318 0x0448 -+#define SSB_BOARD_MPG4318 0x0449 - #define SSB_BOARD_MP4318 0x044A --#define SSB_BOARD_BU4306 0x0416 --#define SSB_BOARD_BU4309 0x040A -+#define SSB_BOARD_SD4318 0x044B -+#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */ -+#define SSB_BOARD_BCM94303MP 0x044E -+#define SSB_BOARD_BCM94306MPM 0x0450 -+#define SSB_BOARD_BCM94306MPL 0x0453 -+#define SSB_BOARD_PC4303 0x0454 /* pcmcia */ -+#define SSB_BOARD_BCM94306MPLNA 0x0457 -+#define SSB_BOARD_BCM94306MPH 0x045B -+#define SSB_BOARD_BCM94306PCIV 0x045C -+#define SSB_BOARD_BCM94318MPGH 0x0463 -+#define SSB_BOARD_BU4311 0x0464 -+#define SSB_BOARD_BCM94311MC 0x0465 -+#define SSB_BOARD_BCM94311MCAG 0x0466 -+/* 4321 boards */ -+#define SSB_BOARD_BU4321 0x046B -+#define SSB_BOARD_BU4321E 0x047C -+#define SSB_BOARD_MP4321 0x046C -+#define SSB_BOARD_CB2_4321 0x046D -+#define SSB_BOARD_CB2_4321_AG 0x0066 -+#define SSB_BOARD_MC4321 0x046E -+/* 4325 boards */ -+#define SSB_BOARD_BCM94325DEVBU 0x0490 -+#define SSB_BOARD_BCM94325BGABU 0x0491 -+#define SSB_BOARD_BCM94325SDGWB 0x0492 -+#define SSB_BOARD_BCM94325SDGMDL 0x04AA -+#define SSB_BOARD_BCM94325SDGMDL2 0x04C6 -+#define SSB_BOARD_BCM94325SDGMDL3 0x04C9 -+#define SSB_BOARD_BCM94325SDABGWBA 0x04E1 -+/* 4322 boards */ -+#define SSB_BOARD_BCM94322MC 0x04A4 -+#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */ -+#define SSB_BOARD_BCM94322HM 0x04B0 -+#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */ -+/* 4312 boards */ -+#define SSB_BOARD_BU4312 0x048A -+#define SSB_BOARD_BCM4312MCGSG 0x04B5 - /* chip_package */ - #define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */ - #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */ -@@ -354,7 +483,11 @@ struct ssb_bus { - #ifdef CONFIG_SSB_EMBEDDED - /* Lock for GPIO register access. */ - spinlock_t gpio_lock; -+ struct platform_device *watchdog; - #endif /* EMBEDDED */ -+#ifdef CONFIG_SSB_DRIVER_GPIO -+ struct gpio_chip gpio; -+#endif /* DRIVER_GPIO */ - - /* Internal-only stuff follows. Do not touch. */ - struct list_head list; ---- a/include/linux/ssb/ssb_driver_chipcommon.h -+++ b/include/linux/ssb/ssb_driver_chipcommon.h -@@ -219,6 +219,7 @@ - #define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */ - #define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ - #define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16 -+#define SSB_CHIPCO_PMU_CTL_PLL_UPD 0x00000400 - #define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ - #define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ - #define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ -@@ -504,7 +505,9 @@ - #define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */ - #define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */ - #define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */ --#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */ -+#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */ -+#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */ -+#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */ - - /* Status register bits for ST flashes */ - #define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */ -@@ -588,7 +591,10 @@ struct ssb_chipcommon { - u32 status; - /* Fast Powerup Delay constant */ - u16 fast_pwrup_delay; -+ spinlock_t gpio_lock; - struct ssb_chipcommon_pmu pmu; -+ u32 ticks_per_ms; -+ u32 max_timer_ms; - }; - - static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) -@@ -628,8 +634,7 @@ enum ssb_clkmode { - extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc, - enum ssb_clkmode mode); - --extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, -- u32 ticks); -+extern u32 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks); - - void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value); - -@@ -642,6 +647,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi - u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value); - u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value); - u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value); -+u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value); -+u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value); - - #ifdef CONFIG_SSB_SERIAL - extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc, -@@ -661,5 +668,6 @@ enum ssb_pmu_ldo_volt_id { - void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, - enum ssb_pmu_ldo_volt_id id, u32 voltage); - void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on); -+void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid); - - #endif /* LINUX_SSB_CHIPCO_H_ */ ---- a/include/linux/ssb/ssb_driver_extif.h -+++ b/include/linux/ssb/ssb_driver_extif.h -@@ -152,12 +152,16 @@ - /* watchdog */ - #define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */ - -+#define SSB_EXTIF_WATCHDOG_MAX_TIMER ((1 << 28) - 1) -+#define SSB_EXTIF_WATCHDOG_MAX_TIMER_MS (SSB_EXTIF_WATCHDOG_MAX_TIMER \ -+ / (SSB_EXTIF_WATCHDOG_CLK / 1000)) - - - #ifdef CONFIG_SSB_DRIVER_EXTIF - - struct ssb_extif { - struct ssb_device *dev; -+ spinlock_t gpio_lock; - }; - - static inline bool ssb_extif_available(struct ssb_extif *extif) -@@ -171,8 +175,7 @@ extern void ssb_extif_get_clockcontrol(s - extern void ssb_extif_timing_init(struct ssb_extif *extif, - unsigned long ns); - --extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif, -- u32 ticks); -+extern u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks); - - /* Extif GPIO pin access */ - u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask); -@@ -205,10 +208,52 @@ void ssb_extif_get_clockcontrol(struct s - } - - static inline --void ssb_extif_watchdog_timer_set(struct ssb_extif *extif, -- u32 ticks) -+void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns) - { - } - -+static inline -+u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks) -+{ -+ return 0; -+} -+ -+static inline u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask) -+{ -+ return 0; -+} -+ -+static inline u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, -+ u32 value) -+{ -+ return 0; -+} -+ -+static inline u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, -+ u32 value) -+{ -+ return 0; -+} -+ -+static inline u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, -+ u32 value) -+{ -+ return 0; -+} -+ -+static inline u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, -+ u32 value) -+{ -+ return 0; -+} -+ -+#ifdef CONFIG_SSB_SERIAL -+static inline int ssb_extif_serial_init(struct ssb_extif *extif, -+ struct ssb_serial_port *ports) -+{ -+ return 0; -+} -+#endif /* CONFIG_SSB_SERIAL */ -+ - #endif /* CONFIG_SSB_DRIVER_EXTIF */ - #endif /* LINUX_SSB_EXTIFCORE_H_ */ ---- a/include/linux/ssb/ssb_driver_gige.h -+++ b/include/linux/ssb/ssb_driver_gige.h -@@ -2,6 +2,7 @@ - #define LINUX_SSB_DRIVER_GIGE_H_ - - #include -+#include - #include - #include - -@@ -96,21 +97,16 @@ static inline bool ssb_gige_must_flush_p - return 0; - } - --#ifdef CONFIG_BCM47XX --#include - /* Get the device MAC address */ --static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) --{ -- char buf[20]; -- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0) -- return; -- nvram_parse_macaddr(buf, macaddr); --} --#else --static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) -+static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) - { -+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev); -+ if (!dev) -+ return -ENODEV; -+ -+ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6); -+ return 0; - } --#endif - - extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, - struct pci_dev *pdev); -@@ -174,6 +170,10 @@ static inline bool ssb_gige_must_flush_p - { - return 0; - } -+static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) -+{ -+ return -ENODEV; -+} - - #endif /* CONFIG_SSB_DRIVER_GIGE */ - #endif /* LINUX_SSB_DRIVER_GIGE_H_ */ ---- a/include/linux/ssb/ssb_driver_mips.h -+++ b/include/linux/ssb/ssb_driver_mips.h -@@ -13,6 +13,24 @@ struct ssb_serial_port { - unsigned int reg_shift; - }; - -+struct ssb_pflash { -+ bool present; -+ u8 buswidth; -+ u32 window; -+ u32 window_size; -+}; -+ -+#ifdef CONFIG_SSB_SFLASH -+struct ssb_sflash { -+ bool present; -+ u32 window; -+ u32 blocksize; -+ u16 numblocks; -+ u32 size; -+ -+ void *priv; -+}; -+#endif - - struct ssb_mipscore { - struct ssb_device *dev; -@@ -20,9 +38,10 @@ struct ssb_mipscore { - int nr_serial_ports; - struct ssb_serial_port serial_ports[4]; - -- u8 flash_buswidth; -- u32 flash_window; -- u32 flash_window_size; -+ struct ssb_pflash pflash; -+#ifdef CONFIG_SSB_SFLASH -+ struct ssb_sflash sflash; -+#endif - }; - - extern void ssb_mipscore_init(struct ssb_mipscore *mcore); -@@ -41,6 +60,11 @@ void ssb_mipscore_init(struct ssb_mipsco - { - } - -+static inline unsigned int ssb_mips_irq(struct ssb_device *dev) -+{ -+ return 0; -+} -+ - #endif /* CONFIG_SSB_DRIVER_MIPS */ - - #endif /* LINUX_SSB_MIPSCORE_H_ */ ---- a/include/linux/ssb/ssb_regs.h -+++ b/include/linux/ssb/ssb_regs.h -@@ -172,6 +172,7 @@ - #define SSB_SPROMSIZE_WORDS_R4 220 - #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) - #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) -+#define SSB_SPROMSIZE_WORDS_R10 230 - #define SSB_SPROM_BASE1 0x1000 - #define SSB_SPROM_BASE31 0x0800 - #define SSB_SPROM_REVISION 0x007E -@@ -228,6 +229,7 @@ - #define SSB_SPROM1_AGAIN_BG_SHIFT 0 - #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ - #define SSB_SPROM1_AGAIN_A_SHIFT 8 -+#define SSB_SPROM1_CCODE 0x0076 - - /* SPROM Revision 2 (inherits from rev 1) */ - #define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ -@@ -267,6 +269,7 @@ - #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ - - /* SPROM Revision 4 */ -+#define SSB_SPROM4_BOARDREV 0x0042 /* Board revision */ - #define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ - #define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ - #define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */ -@@ -287,11 +290,11 @@ - #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 - #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ - #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ --#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */ --#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ --#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 --#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ --#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 -+#define SSB_SPROM4_ANTAVAIL 0x005C /* Antenna available bitfields */ -+#define SSB_SPROM4_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ -+#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 0 -+#define SSB_SPROM4_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ -+#define SSB_SPROM4_ANTAVAIL_A_SHIFT 8 - #define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ - #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ - #define SSB_SPROM4_AGAIN0_SHIFT 0 -@@ -389,6 +392,11 @@ - #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ - #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ - #define SSB_SPROM8_GPIOB_P3_SHIFT 8 -+#define SSB_SPROM8_LEDDC 0x009A -+#define SSB_SPROM8_LEDDC_ON 0xFF00 /* oncount */ -+#define SSB_SPROM8_LEDDC_ON_SHIFT 8 -+#define SSB_SPROM8_LEDDC_OFF 0x00FF /* offcount */ -+#define SSB_SPROM8_LEDDC_OFF_SHIFT 0 - #define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ - #define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ - #define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 -@@ -404,6 +412,13 @@ - #define SSB_SPROM8_AGAIN2_SHIFT 0 - #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ - #define SSB_SPROM8_AGAIN3_SHIFT 8 -+#define SSB_SPROM8_TXRXC 0x00A2 -+#define SSB_SPROM8_TXRXC_TXCHAIN 0x000f -+#define SSB_SPROM8_TXRXC_TXCHAIN_SHIFT 0 -+#define SSB_SPROM8_TXRXC_RXCHAIN 0x00f0 -+#define SSB_SPROM8_TXRXC_RXCHAIN_SHIFT 4 -+#define SSB_SPROM8_TXRXC_SWITCH 0xff00 -+#define SSB_SPROM8_TXRXC_SWITCH_SHIFT 8 - #define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ - #define SSB_SPROM8_RSSISMF2G 0x000F - #define SSB_SPROM8_RSSISMC2G 0x00F0 -@@ -430,6 +445,7 @@ - #define SSB_SPROM8_TRI5GH_SHIFT 8 - #define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ - #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ -+#define SSB_SPROM8_RXPO2G_SHIFT 0 - #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ - #define SSB_SPROM8_RXPO5G_SHIFT 8 - #define SSB_SPROM8_FEM2G 0x00AE -@@ -445,10 +461,71 @@ - #define SSB_SROM8_FEM_ANTSWLUT 0xF800 - #define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 - #define SSB_SPROM8_THERMAL 0x00B2 --#define SSB_SPROM8_MPWR_RAWTS 0x00B4 --#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 --#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 --#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA -+#define SSB_SPROM8_THERMAL_OFFSET 0x00ff -+#define SSB_SPROM8_THERMAL_OFFSET_SHIFT 0 -+#define SSB_SPROM8_THERMAL_TRESH 0xff00 -+#define SSB_SPROM8_THERMAL_TRESH_SHIFT 8 -+/* Temp sense related entries */ -+#define SSB_SPROM8_RAWTS 0x00B4 -+#define SSB_SPROM8_RAWTS_RAWTEMP 0x01ff -+#define SSB_SPROM8_RAWTS_RAWTEMP_SHIFT 0 -+#define SSB_SPROM8_RAWTS_MEASPOWER 0xfe00 -+#define SSB_SPROM8_RAWTS_MEASPOWER_SHIFT 9 -+#define SSB_SPROM8_OPT_CORRX 0x00B6 -+#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE 0x00ff -+#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT 0 -+#define SSB_SPROM8_OPT_CORRX_TEMPCORRX 0xfc00 -+#define SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT 10 -+#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION 0x0300 -+#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT 8 -+/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */ -+#define SSB_SPROM8_HWIQ_IQSWP 0x00B8 -+#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR 0x000f -+#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT 0 -+#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP 0x0010 -+#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4 -+#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020 -+#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5 -+#define SSB_SPROM8_TEMPDELTA 0x00BC -+#define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff -+#define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0 -+#define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00 -+#define SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT 8 -+#define SSB_SPROM8_TEMPDELTA_HYSTERESIS 0xf000 -+#define SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT 12 -+ -+/* There are 4 blocks with power info sharing the same layout */ -+#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 -+#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 -+#define SSB_SROM8_PWR_INFO_CORE2 0x0100 -+#define SSB_SROM8_PWR_INFO_CORE3 0x0120 -+ -+#define SSB_SROM8_2G_MAXP_ITSSI 0x00 -+#define SSB_SPROM8_2G_MAXP 0x00FF -+#define SSB_SPROM8_2G_ITSSI 0xFF00 -+#define SSB_SPROM8_2G_ITSSI_SHIFT 8 -+#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ -+#define SSB_SROM8_2G_PA_1 0x04 -+#define SSB_SROM8_2G_PA_2 0x06 -+#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ -+#define SSB_SPROM8_5G_MAXP 0x00FF -+#define SSB_SPROM8_5G_ITSSI 0xFF00 -+#define SSB_SPROM8_5G_ITSSI_SHIFT 8 -+#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ -+#define SSB_SPROM8_5GH_MAXP 0x00FF -+#define SSB_SPROM8_5GL_MAXP 0xFF00 -+#define SSB_SPROM8_5GL_MAXP_SHIFT 8 -+#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ -+#define SSB_SROM8_5G_PA_1 0x0E -+#define SSB_SROM8_5G_PA_2 0x10 -+#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ -+#define SSB_SROM8_5GL_PA_1 0x14 -+#define SSB_SROM8_5GL_PA_2 0x16 -+#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ -+#define SSB_SROM8_5GH_PA_1 0x1A -+#define SSB_SROM8_5GH_PA_2 0x1C -+ -+/* TODO: Make it deprecated */ - #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ - #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ - #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ -@@ -473,12 +550,23 @@ - #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ - #define SSB_SPROM8_PA1HIB1 0x00DA - #define SSB_SPROM8_PA1HIB2 0x00DC -+ - #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ - #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ - #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ - #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ - #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ - -+#define SSB_SPROM8_2G_MCSPO 0x0152 -+#define SSB_SPROM8_5G_MCSPO 0x0162 -+#define SSB_SPROM8_5GL_MCSPO 0x0172 -+#define SSB_SPROM8_5GH_MCSPO 0x0182 -+ -+#define SSB_SPROM8_CDDPO 0x0192 -+#define SSB_SPROM8_STBCPO 0x0194 -+#define SSB_SPROM8_BW40PO 0x0196 -+#define SSB_SPROM8_BWDUPPO 0x0198 -+ - /* Values for boardflags_lo read from SPROM */ - #define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ - #define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ ---- /dev/null -+++ b/include/linux/bcm47xx_wdt.h -@@ -0,0 +1,19 @@ -+#ifndef LINUX_BCM47XX_WDT_H_ -+#define LINUX_BCM47XX_WDT_H_ -+ -+#include -+ -+ -+struct bcm47xx_wdt { -+ u32 (*timer_set)(struct bcm47xx_wdt *, u32); -+ u32 (*timer_set_ms)(struct bcm47xx_wdt *, u32); -+ u32 max_timer_ms; -+ -+ void *driver_data; -+}; -+ -+static inline void *bcm47xx_wdt_get_drvdata(struct bcm47xx_wdt *wdt) -+{ -+ return wdt->driver_data; -+} -+#endif /* LINUX_BCM47XX_WDT_H_ */ ---- a/drivers/net/wireless/b43/phy_n.c -+++ b/drivers/net/wireless/b43/phy_n.c -@@ -4259,7 +4259,8 @@ static void b43_nphy_pmu_spur_avoid(stru - #endif - #ifdef CONFIG_B43_SSB - case B43_BUS_SSB: -- /* FIXME */ -+ ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco, -+ avoid); - break; - #endif - } diff --git a/target/linux/generic/patches-3.3/025-bcma_backport.patch b/target/linux/generic/patches-3.3/025-bcma_backport.patch deleted file mode 100644 index df80ec435b..0000000000 --- a/target/linux/generic/patches-3.3/025-bcma_backport.patch +++ /dev/null @@ -1,5794 +0,0 @@ ---- a/arch/mips/bcm47xx/serial.c -+++ b/arch/mips/bcm47xx/serial.c -@@ -62,7 +62,7 @@ static int __init uart8250_init_bcma(voi - - p->mapbase = (unsigned int) bcma_port->regs; - p->membase = (void *) bcma_port->regs; -- p->irq = bcma_port->irq + 2; -+ p->irq = bcma_port->irq; - p->uartclk = bcma_port->baud_base; - p->regshift = bcma_port->reg_shift; - p->iotype = UPIO_MEM; ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -26,16 +26,23 @@ config BCMA_HOST_PCI_POSSIBLE - config BCMA_HOST_PCI - bool "Support for BCMA on PCI-host bus" - depends on BCMA_HOST_PCI_POSSIBLE -+ default y - - config BCMA_DRIVER_PCI_HOSTMODE - bool "Driver for PCI core working in hostmode" -- depends on BCMA && MIPS -+ depends on BCMA && MIPS && BCMA_HOST_PCI - help - PCI core hostmode operation (external PCI bus). - - config BCMA_HOST_SOC -- bool -- depends on BCMA_DRIVER_MIPS -+ bool "Support for BCMA in a SoC" -+ depends on BCMA -+ help -+ Host interface for a Broadcom AIX bus directly mapped into -+ the memory. This only works with the Broadcom SoCs from the -+ BCM47XX line. -+ -+ If unsure, say N - - config BCMA_DRIVER_MIPS - bool "BCMA Broadcom MIPS core driver" -@@ -46,6 +53,33 @@ config BCMA_DRIVER_MIPS - - If unsure, say N - -+config BCMA_SFLASH -+ bool -+ depends on BCMA_DRIVER_MIPS -+ default y -+ -+config BCMA_NFLASH -+ bool -+ depends on BCMA_DRIVER_MIPS -+ default y -+ -+config BCMA_DRIVER_GMAC_CMN -+ bool "BCMA Broadcom GBIT MAC COMMON core driver" -+ depends on BCMA -+ help -+ Driver for the Broadcom GBIT MAC COMMON core attached to Broadcom -+ specific Advanced Microcontroller Bus. -+ -+ If unsure, say N -+ -+config BCMA_DRIVER_GPIO -+ bool "BCMA GPIO driver" -+ depends on BCMA && GPIOLIB -+ help -+ Driver to provide access to the GPIO pins of the bcma bus. -+ -+ If unsure, say N -+ - config BCMA_DEBUG - bool "BCMA debugging" - depends on BCMA ---- a/drivers/bcma/Makefile -+++ b/drivers/bcma/Makefile -@@ -1,8 +1,12 @@ - bcma-y += main.o scan.o core.o sprom.o - bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o -+bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o -+bcma-$(CONFIG_BCMA_NFLASH) += driver_chipcommon_nflash.o - bcma-y += driver_pci.o - bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o - bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o -+bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o -+bcma-$(CONFIG_BCMA_DRIVER_GPIO) += driver_gpio.o - bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o - bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o - obj-$(CONFIG_BCMA) += bcma.o ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -10,10 +10,21 @@ - - #define BCMA_CORE_SIZE 0x1000 - -+#define bcma_err(bus, fmt, ...) \ -+ pr_err("bus%d: " fmt, (bus)->num, ##__VA_ARGS__) -+#define bcma_warn(bus, fmt, ...) \ -+ pr_warn("bus%d: " fmt, (bus)->num, ##__VA_ARGS__) -+#define bcma_info(bus, fmt, ...) \ -+ pr_info("bus%d: " fmt, (bus)->num, ##__VA_ARGS__) -+#define bcma_debug(bus, fmt, ...) \ -+ pr_debug("bus%d: " fmt, (bus)->num, ##__VA_ARGS__) -+ - struct bcma_bus; - - /* main.c */ --int bcma_bus_register(struct bcma_bus *bus); -+bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value, -+ int timeout); -+int __devinit bcma_bus_register(struct bcma_bus *bus); - void bcma_bus_unregister(struct bcma_bus *bus); - int __init bcma_bus_early_register(struct bcma_bus *bus, - struct bcma_device *core_cc, -@@ -22,6 +33,8 @@ int __init bcma_bus_early_register(struc - int bcma_bus_suspend(struct bcma_bus *bus); - int bcma_bus_resume(struct bcma_bus *bus); - #endif -+struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, -+ u8 unit); - - /* scan.c */ - int bcma_bus_scan(struct bcma_bus *bus); -@@ -36,11 +49,36 @@ int bcma_sprom_get(struct bcma_bus *bus) - /* driver_chipcommon.c */ - #ifdef CONFIG_BCMA_DRIVER_MIPS - void bcma_chipco_serial_init(struct bcma_drv_cc *cc); -+extern struct platform_device bcma_pflash_dev; - #endif /* CONFIG_BCMA_DRIVER_MIPS */ - - /* driver_chipcommon_pmu.c */ --u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); --u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); -+u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc); -+u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc); -+ -+#ifdef CONFIG_BCMA_SFLASH -+/* driver_chipcommon_sflash.c */ -+int bcma_sflash_init(struct bcma_drv_cc *cc); -+extern struct platform_device bcma_sflash_dev; -+#else -+static inline int bcma_sflash_init(struct bcma_drv_cc *cc) -+{ -+ bcma_err(cc->core->bus, "Serial flash not supported\n"); -+ return 0; -+} -+#endif /* CONFIG_BCMA_SFLASH */ -+ -+#ifdef CONFIG_BCMA_NFLASH -+/* driver_chipcommon_nflash.c */ -+int bcma_nflash_init(struct bcma_drv_cc *cc); -+extern struct platform_device bcma_nflash_dev; -+#else -+static inline int bcma_nflash_init(struct bcma_drv_cc *cc) -+{ -+ bcma_err(cc->core->bus, "NAND flash not supported\n"); -+ return 0; -+} -+#endif /* CONFIG_BCMA_NFLASH */ - - #ifdef CONFIG_BCMA_HOST_PCI - /* host_pci.c */ -@@ -48,8 +86,29 @@ extern int __init bcma_host_pci_init(voi - extern void __exit bcma_host_pci_exit(void); - #endif /* CONFIG_BCMA_HOST_PCI */ - -+/* driver_pci.c */ -+u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); -+ -+extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc); -+ - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE --void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); -+bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); -+void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); - #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ - -+#ifdef CONFIG_BCMA_DRIVER_GPIO -+/* driver_gpio.c */ -+int bcma_gpio_init(struct bcma_drv_cc *cc); -+int bcma_gpio_unregister(struct bcma_drv_cc *cc); -+#else -+static inline int bcma_gpio_init(struct bcma_drv_cc *cc) -+{ -+ return -ENOTSUPP; -+} -+static inline int bcma_gpio_unregister(struct bcma_drv_cc *cc) -+{ -+ return 0; -+} -+#endif /* CONFIG_BCMA_DRIVER_GPIO */ -+ - #endif ---- a/drivers/bcma/core.c -+++ b/drivers/bcma/core.c -@@ -9,6 +9,25 @@ - #include - #include - -+static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask, -+ u32 value, int timeout) -+{ -+ unsigned long deadline = jiffies + timeout; -+ u32 val; -+ -+ do { -+ val = bcma_aread32(core, reg); -+ if ((val & mask) == value) -+ return true; -+ cpu_relax(); -+ udelay(10); -+ } while (!time_after_eq(jiffies, deadline)); -+ -+ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg); -+ -+ return false; -+} -+ - bool bcma_core_is_enabled(struct bcma_device *core) - { - if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC)) -@@ -25,12 +44,15 @@ void bcma_core_disable(struct bcma_devic - if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) - return; - -- bcma_awrite32(core, BCMA_IOCTL, flags); -- bcma_aread32(core, BCMA_IOCTL); -- udelay(10); -+ bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300); - - bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); -+ bcma_aread32(core, BCMA_RESET_CTL); - udelay(1); -+ -+ bcma_awrite32(core, BCMA_IOCTL, flags); -+ bcma_aread32(core, BCMA_IOCTL); -+ udelay(10); - } - EXPORT_SYMBOL_GPL(bcma_core_disable); - -@@ -42,6 +64,7 @@ int bcma_core_enable(struct bcma_device - bcma_aread32(core, BCMA_IOCTL); - - bcma_awrite32(core, BCMA_RESET_CTL, 0); -+ bcma_aread32(core, BCMA_RESET_CTL); - udelay(1); - - bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags)); -@@ -64,7 +87,7 @@ void bcma_core_set_clockmode(struct bcma - switch (clkmode) { - case BCMA_CLKMODE_FAST: - bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); -- udelay(64); -+ usleep_range(64, 300); - for (i = 0; i < 1500; i++) { - if (bcma_read32(core, BCMA_CLKCTLST) & - BCMA_CLKCTLST_HAVEHT) { -@@ -74,10 +97,10 @@ void bcma_core_set_clockmode(struct bcma - udelay(10); - } - if (i) -- pr_err("HT force timeout\n"); -+ bcma_err(core->bus, "HT force timeout\n"); - break; - case BCMA_CLKMODE_DYNAMIC: -- pr_warn("Dynamic clockmode not supported yet!\n"); -+ bcma_set32(core, BCMA_CLKCTLST, ~BCMA_CLKCTLST_FORCEHT); - break; - } - } -@@ -101,9 +124,15 @@ void bcma_core_pll_ctl(struct bcma_devic - udelay(10); - } - if (i) -- pr_err("PLL enable timeout\n"); -+ bcma_err(core->bus, "PLL enable timeout\n"); - } else { -- pr_warn("Disabling PLL not supported yet!\n"); -+ /* -+ * Mask the PLL but don't wait for it to be disabled. PLL may be -+ * shared between cores and will be still up if there is another -+ * core using it. -+ */ -+ bcma_mask32(core, BCMA_CLKCTLST, ~req); -+ bcma_read32(core, BCMA_CLKCTLST); - } - } - EXPORT_SYMBOL_GPL(bcma_core_pll_ctl); -@@ -119,8 +148,8 @@ u32 bcma_core_dma_translation(struct bcm - else - return BCMA_DMA_TRANSLATION_DMA32_CMT; - default: -- pr_err("DMA translation unknown for host %d\n", -- core->bus->hosttype); -+ bcma_err(core->bus, "DMA translation unknown for host %d\n", -+ core->bus->hosttype); - } - return BCMA_DMA_TRANSLATION_NONE; - } ---- a/drivers/bcma/driver_chipcommon.c -+++ b/drivers/bcma/driver_chipcommon.c -@@ -4,12 +4,15 @@ - * - * Copyright 2005, Broadcom Corporation - * Copyright 2006, 2007, Michael Buesch -+ * Copyright 2012, Hauke Mehrtens - * - * Licensed under the GNU/GPL. See COPYING for details. - */ - - #include "bcma_private.h" -+#include - #include -+#include - #include - - static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset, -@@ -22,29 +25,136 @@ static inline u32 bcma_cc_write32_masked - return value; - } - --void bcma_core_chipcommon_init(struct bcma_drv_cc *cc) -+u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc) - { -- u32 leddc_on = 10; -- u32 leddc_off = 90; -+ if (cc->capabilities & BCMA_CC_CAP_PMU) -+ return bcma_pmu_get_alp_clock(cc); - -- if (cc->setup_done) -+ return 20000000; -+} -+EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock); -+ -+static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc) -+{ -+ struct bcma_bus *bus = cc->core->bus; -+ u32 nb; -+ -+ if (cc->capabilities & BCMA_CC_CAP_PMU) { -+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) -+ nb = 32; -+ else if (cc->core->id.rev < 26) -+ nb = 16; -+ else -+ nb = (cc->core->id.rev >= 37) ? 32 : 24; -+ } else { -+ nb = 28; -+ } -+ if (nb == 32) -+ return 0xffffffff; -+ else -+ return (1 << nb) - 1; -+} -+ -+static u32 bcma_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, -+ u32 ticks) -+{ -+ struct bcma_drv_cc *cc = bcm47xx_wdt_get_drvdata(wdt); -+ -+ return bcma_chipco_watchdog_timer_set(cc, ticks); -+} -+ -+static u32 bcma_chipco_watchdog_timer_set_ms_wdt(struct bcm47xx_wdt *wdt, -+ u32 ms) -+{ -+ struct bcma_drv_cc *cc = bcm47xx_wdt_get_drvdata(wdt); -+ u32 ticks; -+ -+ ticks = bcma_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms); -+ return ticks / cc->ticks_per_ms; -+} -+ -+static int bcma_chipco_watchdog_ticks_per_ms(struct bcma_drv_cc *cc) -+{ -+ struct bcma_bus *bus = cc->core->bus; -+ -+ if (cc->capabilities & BCMA_CC_CAP_PMU) { -+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) -+ /* 4706 CC and PMU watchdogs are clocked at 1/4 of ALP clock */ -+ return bcma_chipco_get_alp_clock(cc) / 4000; -+ else -+ /* based on 32KHz ILP clock */ -+ return 32; -+ } else { -+ return bcma_chipco_get_alp_clock(cc) / 1000; -+ } -+} -+ -+int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc) -+{ -+ struct bcm47xx_wdt wdt = {}; -+ struct platform_device *pdev; -+ -+ wdt.driver_data = cc; -+ wdt.timer_set = bcma_chipco_watchdog_timer_set_wdt; -+ wdt.timer_set_ms = bcma_chipco_watchdog_timer_set_ms_wdt; -+ wdt.max_timer_ms = bcma_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms; -+ -+ pdev = platform_device_register_data(NULL, "bcm47xx-wdt", -+ cc->core->bus->num, &wdt, -+ sizeof(wdt)); -+ if (IS_ERR(pdev)) -+ return PTR_ERR(pdev); -+ -+ cc->watchdog = pdev; -+ -+ return 0; -+} -+ -+void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc) -+{ -+ if (cc->early_setup_done) - return; - -+ spin_lock_init(&cc->gpio_lock); -+ - if (cc->core->id.rev >= 11) - cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); - cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); - if (cc->core->id.rev >= 35) - cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT); - -+ if (cc->capabilities & BCMA_CC_CAP_PMU) -+ bcma_pmu_early_init(cc); -+ -+ cc->early_setup_done = true; -+} -+ -+void bcma_core_chipcommon_init(struct bcma_drv_cc *cc) -+{ -+ u32 leddc_on = 10; -+ u32 leddc_off = 90; -+ -+ if (cc->setup_done) -+ return; -+ -+ bcma_core_chipcommon_early_init(cc); -+ - if (cc->core->id.rev >= 20) { -- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0); -- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0); -+ u32 pullup = 0, pulldown = 0; -+ -+ if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) { -+ pullup = 0x402e0; -+ pulldown = 0x20500; -+ } -+ -+ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup); -+ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown); - } - - if (cc->capabilities & BCMA_CC_CAP_PMU) - bcma_pmu_init(cc); - if (cc->capabilities & BCMA_CC_CAP_PCTL) -- pr_err("Power control not implemented!\n"); -+ bcma_err(cc->core->bus, "Power control not implemented!\n"); - - if (cc->core->id.rev >= 16) { - if (cc->core->bus->sprom.leddc_on_time && -@@ -56,15 +166,33 @@ void bcma_core_chipcommon_init(struct bc - ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | - (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); - } -+ cc->ticks_per_ms = bcma_chipco_watchdog_ticks_per_ms(cc); - - cc->setup_done = true; - } - - /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ --void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks) -+u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks) - { -- /* instant NMI */ -- bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks); -+ u32 maxt; -+ enum bcma_clkmode clkmode; -+ -+ maxt = bcma_chipco_watchdog_get_max_timer(cc); -+ if (cc->capabilities & BCMA_CC_CAP_PMU) { -+ if (ticks == 1) -+ ticks = 2; -+ else if (ticks > maxt) -+ ticks = maxt; -+ bcma_cc_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks); -+ } else { -+ clkmode = ticks ? BCMA_CLKMODE_FAST : BCMA_CLKMODE_DYNAMIC; -+ bcma_core_set_clockmode(cc->core, clkmode); -+ if (ticks > maxt) -+ ticks = maxt; -+ /* instant NMI */ -+ bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks); -+ } -+ return ticks; - } - - void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value) -@@ -84,28 +212,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_ - - u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value) - { -- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value); -+ unsigned long flags; -+ u32 res; -+ -+ spin_lock_irqsave(&cc->gpio_lock, flags); -+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value); -+ spin_unlock_irqrestore(&cc->gpio_lock, flags); -+ -+ return res; - } -+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out); - - u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value) - { -- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value); -+ unsigned long flags; -+ u32 res; -+ -+ spin_lock_irqsave(&cc->gpio_lock, flags); -+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value); -+ spin_unlock_irqrestore(&cc->gpio_lock, flags); -+ -+ return res; - } -+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen); - -+/* -+ * If the bit is set to 0, chipcommon controlls this GPIO, -+ * if the bit is set to 1, it is used by some part of the chip and not our code. -+ */ - u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value) - { -- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value); -+ unsigned long flags; -+ u32 res; -+ -+ spin_lock_irqsave(&cc->gpio_lock, flags); -+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value); -+ spin_unlock_irqrestore(&cc->gpio_lock, flags); -+ -+ return res; - } - EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control); - - u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value) - { -- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value); -+ unsigned long flags; -+ u32 res; -+ -+ spin_lock_irqsave(&cc->gpio_lock, flags); -+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value); -+ spin_unlock_irqrestore(&cc->gpio_lock, flags); -+ -+ return res; - } - - u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value) - { -- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); -+ unsigned long flags; -+ u32 res; -+ -+ spin_lock_irqsave(&cc->gpio_lock, flags); -+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); -+ spin_unlock_irqrestore(&cc->gpio_lock, flags); -+ -+ return res; -+} -+ -+u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value) -+{ -+ unsigned long flags; -+ u32 res; -+ -+ if (cc->core->id.rev < 20) -+ return 0; -+ -+ spin_lock_irqsave(&cc->gpio_lock, flags); -+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLUP, mask, value); -+ spin_unlock_irqrestore(&cc->gpio_lock, flags); -+ -+ return res; -+} -+ -+u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value) -+{ -+ unsigned long flags; -+ u32 res; -+ -+ if (cc->core->id.rev < 20) -+ return 0; -+ -+ spin_lock_irqsave(&cc->gpio_lock, flags); -+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLDOWN, mask, value); -+ spin_unlock_irqrestore(&cc->gpio_lock, flags); -+ -+ return res; - } - - #ifdef CONFIG_BCMA_DRIVER_MIPS -@@ -118,8 +317,7 @@ void bcma_chipco_serial_init(struct bcma - struct bcma_serial_port *ports = cc->serial_ports; - - if (ccrev >= 11 && ccrev != 15) { -- /* Fixed ALP clock */ -- baud_base = bcma_pmu_alp_clock(cc); -+ baud_base = bcma_chipco_get_alp_clock(cc); - if (ccrev >= 21) { - /* Turn off UART clock before switching clocksource. */ - bcma_cc_write32(cc, BCMA_CC_CORECTL, -@@ -137,12 +335,11 @@ void bcma_chipco_serial_init(struct bcma - | BCMA_CC_CORECTL_UARTCLKEN); - } - } else { -- pr_err("serial not supported on this device ccrev: 0x%x\n", -- ccrev); -+ bcma_err(cc->core->bus, "serial not supported on this device ccrev: 0x%x\n", ccrev); - return; - } - -- irq = bcma_core_mips_irq(cc->core); -+ irq = bcma_core_irq(cc->core); - - /* Determine the registers of the UARTs */ - cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); ---- /dev/null -+++ b/drivers/bcma/driver_chipcommon_nflash.c -@@ -0,0 +1,44 @@ -+/* -+ * Broadcom specific AMBA -+ * ChipCommon NAND flash interface -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include "bcma_private.h" -+ -+#include -+#include -+ -+struct platform_device bcma_nflash_dev = { -+ .name = "bcma_nflash", -+ .num_resources = 0, -+}; -+ -+/* Initialize NAND flash access */ -+int bcma_nflash_init(struct bcma_drv_cc *cc) -+{ -+ struct bcma_bus *bus = cc->core->bus; -+ -+ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 && -+ cc->core->id.rev != 38) { -+ bcma_err(bus, "NAND flash on unsupported board!\n"); -+ return -ENOTSUPP; -+ } -+ -+ if (!(cc->capabilities & BCMA_CC_CAP_NFLASH)) { -+ bcma_err(bus, "NAND flash not present according to ChipCommon\n"); -+ return -ENODEV; -+ } -+ -+ cc->nflash.present = true; -+ if (cc->core->id.rev == 38 && -+ (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT)) -+ cc->nflash.boot = true; -+ -+ /* Prepare platform device, but don't register it yet. It's too early, -+ * malloc (required by device_private_init) is not available yet. */ -+ bcma_nflash_dev.dev.platform_data = &cc->nflash; -+ -+ return 0; -+} ---- a/drivers/bcma/driver_chipcommon_pmu.c -+++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -3,7 +3,8 @@ - * ChipCommon Power Management Unit driver - * - * Copyright 2009, Michael Buesch -- * Copyright 2007, Broadcom Corporation -+ * Copyright 2007, 2011, Broadcom Corporation -+ * Copyright 2011, 2012, Hauke Mehrtens - * - * Licensed under the GNU/GPL. See COPYING for details. - */ -@@ -12,12 +13,13 @@ - #include - #include - --static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) -+u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) - { - bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); - bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); - return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); - } -+EXPORT_SYMBOL_GPL(bcma_chipco_pll_read); - - void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) - { -@@ -54,19 +56,106 @@ void bcma_chipco_regctl_maskset(struct b - } - EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); - -+static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc) -+{ -+ u32 ilp_ctl, alp_hz; -+ -+ if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) & -+ BCMA_CC_PMU_STAT_EXT_LPO_AVAIL)) -+ return 0; -+ -+ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, -+ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT)); -+ usleep_range(1000, 2000); -+ -+ ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ); -+ ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK; -+ -+ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0); -+ -+ alp_hz = ilp_ctl * 32768 / 4; -+ return (alp_hz + 50000) / 100000 * 100; -+} -+ -+static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq) -+{ -+ struct bcma_bus *bus = cc->core->bus; -+ u32 freq_tgt_target = 0, freq_tgt_current; -+ u32 pll0, mask; -+ -+ switch (bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM43142: -+ /* pmu2_xtaltab0_adfll_485 */ -+ switch (xtalfreq) { -+ case 12000: -+ freq_tgt_target = 0x50D52; -+ break; -+ case 20000: -+ freq_tgt_target = 0x307FE; -+ break; -+ case 26000: -+ freq_tgt_target = 0x254EA; -+ break; -+ case 37400: -+ freq_tgt_target = 0x19EF8; -+ break; -+ case 52000: -+ freq_tgt_target = 0x12A75; -+ break; -+ } -+ break; -+ } -+ -+ if (!freq_tgt_target) { -+ bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n", -+ xtalfreq); -+ return; -+ } -+ -+ pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0); -+ freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >> -+ BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT; -+ -+ if (freq_tgt_current == freq_tgt_target) { -+ bcma_debug(bus, "Target TGT frequency already set\n"); -+ return; -+ } -+ -+ /* Turn off PLL */ -+ switch (bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM43142: -+ mask = (u32)~(BCMA_RES_4314_HT_AVAIL | -+ BCMA_RES_4314_MACPHY_CLK_AVAIL); -+ -+ bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask); -+ bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask); -+ bcma_wait_value(cc->core, BCMA_CLKCTLST, -+ BCMA_CLKCTLST_HAVEHT, 0, 20000); -+ break; -+ } -+ -+ pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK; -+ pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT; -+ bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0); -+ -+ /* Flush */ -+ if (cc->pmu.rev >= 2) -+ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD); -+ -+ /* TODO: Do we need to update OTP? */ -+} -+ - static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) - { - struct bcma_bus *bus = cc->core->bus; -+ u32 xtalfreq = bcma_pmu_xtalfreq(cc); - - switch (bus->chipinfo.id) { -- case 0x4313: -- case 0x4331: -- case 43224: -- case 43225: -+ case BCMA_CHIP_ID_BCM43142: -+ if (xtalfreq == 0) -+ xtalfreq = 20000; -+ bcma_pmu2_pll_init0(cc, xtalfreq); - break; -- default: -- pr_err("PLL init unknown for device 0x%04X\n", -- bus->chipinfo.id); - } - } - -@@ -76,16 +165,32 @@ static void bcma_pmu_resources_init(stru - u32 min_msk = 0, max_msk = 0; - - switch (bus->chipinfo.id) { -- case 0x4313: -+ case BCMA_CHIP_ID_BCM4313: - min_msk = 0x200D; - max_msk = 0xFFFF; - break; -- case 43224: -- case 43225: -+ case BCMA_CHIP_ID_BCM43142: -+ min_msk = BCMA_RES_4314_LPLDO_PU | -+ BCMA_RES_4314_PMU_SLEEP_DIS | -+ BCMA_RES_4314_PMU_BG_PU | -+ BCMA_RES_4314_CBUCK_LPOM_PU | -+ BCMA_RES_4314_CBUCK_PFM_PU | -+ BCMA_RES_4314_CLDO_PU | -+ BCMA_RES_4314_LPLDO2_LVM | -+ BCMA_RES_4314_WL_PMU_PU | -+ BCMA_RES_4314_LDO3P3_PU | -+ BCMA_RES_4314_OTP_PU | -+ BCMA_RES_4314_WL_PWRSW_PU | -+ BCMA_RES_4314_LQ_AVAIL | -+ BCMA_RES_4314_LOGIC_RET | -+ BCMA_RES_4314_MEM_SLEEP | -+ BCMA_RES_4314_MACPHY_RET | -+ BCMA_RES_4314_WL_CORE_READY; -+ max_msk = 0x3FFFFFFF; - break; - default: -- pr_err("PMU resource config unknown for device 0x%04X\n", -- bus->chipinfo.id); -+ bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n", -+ bus->chipinfo.id); - } - - /* Set the resource masks. */ -@@ -93,22 +198,12 @@ static void bcma_pmu_resources_init(stru - bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk); - if (max_msk) - bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk); --} - --void bcma_pmu_swreg_init(struct bcma_drv_cc *cc) --{ -- struct bcma_bus *bus = cc->core->bus; -- -- switch (bus->chipinfo.id) { -- case 0x4313: -- case 0x4331: -- case 43224: -- case 43225: -- break; -- default: -- pr_err("PMU switch/regulators init unknown for device " -- "0x%04X\n", bus->chipinfo.id); -- } -+ /* -+ * Add some delay; allow resources to come up and settle. -+ * Delay is required for SoC (early init). -+ */ -+ mdelay(2); - } - - /* Disable to allow reading SPROM. Don't know the adventages of enabling it. */ -@@ -122,51 +217,69 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct - val |= BCMA_CHIPCTL_4331_EXTPA_EN; - if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11) - val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; -+ else if (bus->chipinfo.rev > 0) -+ val |= BCMA_CHIPCTL_4331_EXTPA_EN2; - } else { - val &= ~BCMA_CHIPCTL_4331_EXTPA_EN; -+ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN2; - val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; - } - bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); - } - --void bcma_pmu_workarounds(struct bcma_drv_cc *cc) -+static void bcma_pmu_workarounds(struct bcma_drv_cc *cc) - { - struct bcma_bus *bus = cc->core->bus; - - switch (bus->chipinfo.id) { -- case 0x4313: -- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); -+ case BCMA_CHIP_ID_BCM4313: -+ /* enable 12 mA drive strenth for 4313 and set chipControl -+ register bit 1 */ -+ bcma_chipco_chipctl_maskset(cc, 0, -+ ~BCMA_CCTRL_4313_12MA_LED_DRIVE, -+ BCMA_CCTRL_4313_12MA_LED_DRIVE); - break; -- case 0x4331: -- /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ -+ case BCMA_CHIP_ID_BCM4331: -+ case BCMA_CHIP_ID_BCM43431: -+ /* Ext PA lines must be enabled for tx on BCM4331 */ -+ bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true); - break; -- case 43224: -+ case BCMA_CHIP_ID_BCM43224: -+ case BCMA_CHIP_ID_BCM43421: -+ /* enable 12 mA drive strenth for 43224 and set chipControl -+ register bit 15 */ - if (bus->chipinfo.rev == 0) { -- pr_err("Workarounds for 43224 rev 0 not fully " -- "implemented\n"); -- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0); -+ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL, -+ ~BCMA_CCTRL_43224_GPIO_TOGGLE, -+ BCMA_CCTRL_43224_GPIO_TOGGLE); -+ bcma_chipco_chipctl_maskset(cc, 0, -+ ~BCMA_CCTRL_43224A0_12MA_LED_DRIVE, -+ BCMA_CCTRL_43224A0_12MA_LED_DRIVE); - } else { -- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); -+ bcma_chipco_chipctl_maskset(cc, 0, -+ ~BCMA_CCTRL_43224B0_12MA_LED_DRIVE, -+ BCMA_CCTRL_43224B0_12MA_LED_DRIVE); - } - break; -- case 43225: -- break; - default: -- pr_err("Workarounds unknown for device 0x%04X\n", -- bus->chipinfo.id); -+ bcma_debug(bus, "Workarounds unknown or not needed for device 0x%04X\n", -+ bus->chipinfo.id); - } - } - --void bcma_pmu_init(struct bcma_drv_cc *cc) -+void bcma_pmu_early_init(struct bcma_drv_cc *cc) - { - u32 pmucap; - - pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP); - cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION); - -- pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, -- pmucap); -+ bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n", -+ cc->pmu.rev, pmucap); -+} - -+void bcma_pmu_init(struct bcma_drv_cc *cc) -+{ - if (cc->pmu.rev == 1) - bcma_cc_mask32(cc, BCMA_CC_PMU_CTL, - ~BCMA_CC_PMU_CTL_NOILPONW); -@@ -174,37 +287,48 @@ void bcma_pmu_init(struct bcma_drv_cc *c - bcma_cc_set32(cc, BCMA_CC_PMU_CTL, - BCMA_CC_PMU_CTL_NOILPONW); - -- if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2) -- pr_err("Fix for 4329b0 bad LPOM state not implemented!\n"); -- - bcma_pmu_pll_init(cc); - bcma_pmu_resources_init(cc); -- bcma_pmu_swreg_init(cc); - bcma_pmu_workarounds(cc); - } - --u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc) -+u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc) - { - struct bcma_bus *bus = cc->core->bus; - - switch (bus->chipinfo.id) { -- case 0x4716: -- case 0x4748: -- case 47162: -- case 0x4313: -- case 0x5357: -- case 0x4749: -- case 53572: -+ case BCMA_CHIP_ID_BCM4313: -+ case BCMA_CHIP_ID_BCM43224: -+ case BCMA_CHIP_ID_BCM43225: -+ case BCMA_CHIP_ID_BCM43227: -+ case BCMA_CHIP_ID_BCM43228: -+ case BCMA_CHIP_ID_BCM4331: -+ case BCMA_CHIP_ID_BCM43421: -+ case BCMA_CHIP_ID_BCM43428: -+ case BCMA_CHIP_ID_BCM43431: -+ case BCMA_CHIP_ID_BCM4716: -+ case BCMA_CHIP_ID_BCM47162: -+ case BCMA_CHIP_ID_BCM4748: -+ case BCMA_CHIP_ID_BCM4749: -+ case BCMA_CHIP_ID_BCM5357: -+ case BCMA_CHIP_ID_BCM53572: -+ case BCMA_CHIP_ID_BCM6362: - /* always 20Mhz */ - return 20000 * 1000; -- case 0x5356: -- case 0x5300: -+ case BCMA_CHIP_ID_BCM4706: -+ case BCMA_CHIP_ID_BCM5356: - /* always 25Mhz */ - return 25000 * 1000; -+ case BCMA_CHIP_ID_BCM43460: -+ case BCMA_CHIP_ID_BCM4352: -+ case BCMA_CHIP_ID_BCM4360: -+ if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ) -+ return 40000 * 1000; -+ else -+ return 20000 * 1000; - default: -- pr_warn("No ALP clock specified for %04X device, " -- "pmu rev. %d, using default %d Hz\n", -- bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); -+ bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n", -+ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); - } - return BCMA_CC_PMU_ALP_CLOCK; - } -@@ -212,7 +336,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c - /* Find the output of the "m" pll divider given pll controls that start with - * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc. - */ --static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m) -+static u32 bcma_pmu_pll_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m) - { - u32 tmp, div, ndiv, p1, p2, fc; - struct bcma_bus *bus = cc->core->bus; -@@ -221,7 +345,8 @@ static u32 bcma_pmu_clock(struct bcma_dr - - BUG_ON(!m || m > 4); - -- if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) { -+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 || -+ bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) { - /* Detect failure in clock setting */ - tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); - if (tmp & 0x40000) -@@ -240,60 +365,96 @@ static u32 bcma_pmu_clock(struct bcma_dr - ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT; - - /* Do calculation in Mhz */ -- fc = bcma_pmu_alp_clock(cc) / 1000000; -+ fc = bcma_pmu_get_alp_clock(cc) / 1000000; - fc = (p1 * ndiv * fc) / p2; - - /* Return clock in Hertz */ - return (fc / div) * 1000000; - } - -+static u32 bcma_pmu_pll_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m) -+{ -+ u32 tmp, ndiv, p1div, p2div; -+ u32 clock; -+ -+ BUG_ON(!m || m > 4); -+ -+ /* Get N, P1 and P2 dividers to determine CPU clock */ -+ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PMU6_4706_PROCPLL_OFF); -+ ndiv = (tmp & BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK) -+ >> BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT; -+ p1div = (tmp & BCMA_CC_PMU6_4706_PROC_P1DIV_MASK) -+ >> BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT; -+ p2div = (tmp & BCMA_CC_PMU6_4706_PROC_P2DIV_MASK) -+ >> BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT; -+ -+ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); -+ if (tmp & BCMA_CC_CHIPST_4706_PKG_OPTION) -+ /* Low cost bonding: Fixed reference clock 25MHz and m = 4 */ -+ clock = (25000000 / 4) * ndiv * p2div / p1div; -+ else -+ /* Fixed reference clock 25MHz and m = 2 */ -+ clock = (25000000 / 2) * ndiv * p2div / p1div; -+ -+ if (m == BCMA_CC_PMU5_MAINPLL_SSB) -+ clock = clock / 4; -+ -+ return clock; -+} -+ - /* query bus clock frequency for PMU-enabled chipcommon */ --u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) -+u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc) - { - struct bcma_bus *bus = cc->core->bus; - - switch (bus->chipinfo.id) { -- case 0x4716: -- case 0x4748: -- case 47162: -- return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, -- BCMA_CC_PMU5_MAINPLL_SSB); -- case 0x5356: -- return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, -- BCMA_CC_PMU5_MAINPLL_SSB); -- case 0x5357: -- case 0x4749: -- return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, -- BCMA_CC_PMU5_MAINPLL_SSB); -- case 0x5300: -- return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, -- BCMA_CC_PMU5_MAINPLL_SSB); -- case 53572: -+ case BCMA_CHIP_ID_BCM4716: -+ case BCMA_CHIP_ID_BCM4748: -+ case BCMA_CHIP_ID_BCM47162: -+ return bcma_pmu_pll_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, -+ BCMA_CC_PMU5_MAINPLL_SSB); -+ case BCMA_CHIP_ID_BCM5356: -+ return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, -+ BCMA_CC_PMU5_MAINPLL_SSB); -+ case BCMA_CHIP_ID_BCM5357: -+ case BCMA_CHIP_ID_BCM4749: -+ return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, -+ BCMA_CC_PMU5_MAINPLL_SSB); -+ case BCMA_CHIP_ID_BCM4706: -+ return bcma_pmu_pll_clock_bcm4706(cc, -+ BCMA_CC_PMU4706_MAINPLL_PLL0, -+ BCMA_CC_PMU5_MAINPLL_SSB); -+ case BCMA_CHIP_ID_BCM53572: - return 75000000; - default: -- pr_warn("No backplane clock specified for %04X device, " -- "pmu rev. %d, using default %d Hz\n", -- bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); -+ bcma_warn(bus, "No bus clock specified for %04X device, pmu rev. %d, using default %d Hz\n", -+ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); - } - return BCMA_CC_PMU_HT_CLOCK; - } -+EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock); - - /* query cpu clock frequency for PMU-enabled chipcommon */ --u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc) -+u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc) - { - struct bcma_bus *bus = cc->core->bus; - -- if (bus->chipinfo.id == 53572) -+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM53572) - return 300000000; - -+ /* New PMUs can have different clock for bus and CPU */ - if (cc->pmu.rev >= 5) { - u32 pll; - switch (bus->chipinfo.id) { -- case 0x5356: -+ case BCMA_CHIP_ID_BCM4706: -+ return bcma_pmu_pll_clock_bcm4706(cc, -+ BCMA_CC_PMU4706_MAINPLL_PLL0, -+ BCMA_CC_PMU5_MAINPLL_CPU); -+ case BCMA_CHIP_ID_BCM5356: - pll = BCMA_CC_PMU5356_MAINPLL_PLL0; - break; -- case 0x5357: -- case 0x4749: -+ case BCMA_CHIP_ID_BCM5357: -+ case BCMA_CHIP_ID_BCM4749: - pll = BCMA_CC_PMU5357_MAINPLL_PLL0; - break; - default: -@@ -301,10 +462,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr - break; - } - -- /* TODO: if (bus->chipinfo.id == 0x5300) -- return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ -- return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); -+ return bcma_pmu_pll_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); -+ } -+ -+ /* On old PMUs CPU has the same clock as the bus */ -+ return bcma_pmu_get_bus_clock(cc); -+} -+ -+static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset, -+ u32 value) -+{ -+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); -+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); -+} -+ -+void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid) -+{ -+ u32 tmp = 0; -+ u8 phypll_offset = 0; -+ u8 bcm5357_bcm43236_p1div[] = {0x1, 0x5, 0x5}; -+ u8 bcm5357_bcm43236_ndiv[] = {0x30, 0xf6, 0xfc}; -+ struct bcma_bus *bus = cc->core->bus; -+ -+ switch (bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM5357: -+ case BCMA_CHIP_ID_BCM4749: -+ case BCMA_CHIP_ID_BCM53572: -+ /* 5357[ab]0, 43236[ab]0, and 6362b0 */ -+ -+ /* BCM5357 needs to touch PLL1_PLLCTL[02], -+ so offset PLL0_PLLCTL[02] by 6 */ -+ phypll_offset = (bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 || -+ bus->chipinfo.id == BCMA_CHIP_ID_BCM4749 || -+ bus->chipinfo.id == BCMA_CHIP_ID_BCM53572) ? 6 : 0; -+ -+ /* RMW only the P1 divider */ -+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, -+ BCMA_CC_PMU_PLL_CTL0 + phypll_offset); -+ tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); -+ tmp &= (~(BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK)); -+ tmp |= (bcm5357_bcm43236_p1div[spuravoid] << BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT); -+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp); -+ -+ /* RMW only the int feedback divider */ -+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, -+ BCMA_CC_PMU_PLL_CTL2 + phypll_offset); -+ tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); -+ tmp &= ~(BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK); -+ tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT; -+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp); -+ -+ tmp = BCMA_CC_PMU_CTL_PLL_UPD; -+ break; -+ -+ case BCMA_CHIP_ID_BCM4331: -+ case BCMA_CHIP_ID_BCM43431: -+ if (spuravoid == 2) { -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, -+ 0x11500014); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, -+ 0x0FC00a08); -+ } else if (spuravoid == 1) { -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, -+ 0x11500014); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, -+ 0x0F600a08); -+ } else { -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, -+ 0x11100014); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, -+ 0x03000a08); -+ } -+ tmp = BCMA_CC_PMU_CTL_PLL_UPD; -+ break; -+ -+ case BCMA_CHIP_ID_BCM43224: -+ case BCMA_CHIP_ID_BCM43225: -+ case BCMA_CHIP_ID_BCM43421: -+ if (spuravoid == 1) { -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, -+ 0x11500010); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1, -+ 0x000C0C06); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, -+ 0x0F600a08); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3, -+ 0x00000000); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4, -+ 0x2001E920); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, -+ 0x88888815); -+ } else { -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, -+ 0x11100010); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1, -+ 0x000c0c06); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, -+ 0x03000a08); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3, -+ 0x00000000); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4, -+ 0x200005c0); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, -+ 0x88888815); -+ } -+ tmp = BCMA_CC_PMU_CTL_PLL_UPD; -+ break; -+ -+ case BCMA_CHIP_ID_BCM4716: -+ case BCMA_CHIP_ID_BCM4748: -+ case BCMA_CHIP_ID_BCM47162: -+ if (spuravoid == 1) { -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, -+ 0x11500060); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1, -+ 0x080C0C06); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, -+ 0x0F600000); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3, -+ 0x00000000); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4, -+ 0x2001E924); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, -+ 0x88888815); -+ } else { -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, -+ 0x11100060); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1, -+ 0x080c0c06); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, -+ 0x03000000); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3, -+ 0x00000000); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4, -+ 0x200005c0); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, -+ 0x88888815); -+ } -+ -+ tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW; -+ break; -+ -+ case BCMA_CHIP_ID_BCM43227: -+ case BCMA_CHIP_ID_BCM43228: -+ case BCMA_CHIP_ID_BCM43428: -+ /* LCNXN */ -+ /* PLL Settings for spur avoidance on/off mode, -+ no on2 support for 43228A0 */ -+ if (spuravoid == 1) { -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, -+ 0x01100014); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1, -+ 0x040C0C06); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, -+ 0x03140A08); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3, -+ 0x00333333); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4, -+ 0x202C2820); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, -+ 0x88888815); -+ } else { -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, -+ 0x11100014); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1, -+ 0x040c0c06); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, -+ 0x03000a08); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3, -+ 0x00000000); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4, -+ 0x200005c0); -+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, -+ 0x88888815); -+ } -+ tmp = BCMA_CC_PMU_CTL_PLL_UPD; -+ break; -+ default: -+ bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n", -+ bus->chipinfo.id); -+ break; - } - -- return bcma_pmu_get_clockcontrol(cc); -+ tmp |= bcma_cc_read32(cc, BCMA_CC_PMU_CTL); -+ bcma_cc_write32(cc, BCMA_CC_PMU_CTL, tmp); - } -+EXPORT_SYMBOL_GPL(bcma_pmu_spuravoid_pllupdate); ---- /dev/null -+++ b/drivers/bcma/driver_chipcommon_sflash.c -@@ -0,0 +1,165 @@ -+/* -+ * Broadcom specific AMBA -+ * ChipCommon serial flash interface -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include "bcma_private.h" -+ -+#include -+#include -+ -+static struct resource bcma_sflash_resource = { -+ .name = "bcma_sflash", -+ .start = BCMA_SOC_FLASH2, -+ .end = 0, -+ .flags = IORESOURCE_MEM | IORESOURCE_READONLY, -+}; -+ -+struct platform_device bcma_sflash_dev = { -+ .name = "bcma_sflash", -+ .resource = &bcma_sflash_resource, -+ .num_resources = 1, -+}; -+ -+struct bcma_sflash_tbl_e { -+ char *name; -+ u32 id; -+ u32 blocksize; -+ u16 numblocks; -+}; -+ -+static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = { -+ { "M25P20", 0x11, 0x10000, 4, }, -+ { "M25P40", 0x12, 0x10000, 8, }, -+ -+ { "M25P16", 0x14, 0x10000, 32, }, -+ { "M25P32", 0x15, 0x10000, 64, }, -+ { "M25P64", 0x16, 0x10000, 128, }, -+ { "M25FL128", 0x17, 0x10000, 256, }, -+ { 0 }, -+}; -+ -+static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = { -+ { "SST25WF512", 1, 0x1000, 16, }, -+ { "SST25VF512", 0x48, 0x1000, 16, }, -+ { "SST25WF010", 2, 0x1000, 32, }, -+ { "SST25VF010", 0x49, 0x1000, 32, }, -+ { "SST25WF020", 3, 0x1000, 64, }, -+ { "SST25VF020", 0x43, 0x1000, 64, }, -+ { "SST25WF040", 4, 0x1000, 128, }, -+ { "SST25VF040", 0x44, 0x1000, 128, }, -+ { "SST25VF040B", 0x8d, 0x1000, 128, }, -+ { "SST25WF080", 5, 0x1000, 256, }, -+ { "SST25VF080B", 0x8e, 0x1000, 256, }, -+ { "SST25VF016", 0x41, 0x1000, 512, }, -+ { "SST25VF032", 0x4a, 0x1000, 1024, }, -+ { "SST25VF064", 0x4b, 0x1000, 2048, }, -+ { 0 }, -+}; -+ -+static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = { -+ { "AT45DB011", 0xc, 256, 512, }, -+ { "AT45DB021", 0x14, 256, 1024, }, -+ { "AT45DB041", 0x1c, 256, 2048, }, -+ { "AT45DB081", 0x24, 256, 4096, }, -+ { "AT45DB161", 0x2c, 512, 4096, }, -+ { "AT45DB321", 0x34, 512, 8192, }, -+ { "AT45DB642", 0x3c, 1024, 8192, }, -+ { 0 }, -+}; -+ -+static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode) -+{ -+ int i; -+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, -+ BCMA_CC_FLASHCTL_START | opcode); -+ for (i = 0; i < 1000; i++) { -+ if (!(bcma_cc_read32(cc, BCMA_CC_FLASHCTL) & -+ BCMA_CC_FLASHCTL_BUSY)) -+ return; -+ cpu_relax(); -+ } -+ bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n"); -+} -+ -+/* Initialize serial flash access */ -+int bcma_sflash_init(struct bcma_drv_cc *cc) -+{ -+ struct bcma_bus *bus = cc->core->bus; -+ struct bcma_sflash *sflash = &cc->sflash; -+ const struct bcma_sflash_tbl_e *e; -+ u32 id, id2; -+ -+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { -+ case BCMA_CC_FLASHT_STSER: -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP); -+ -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0); -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES); -+ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA); -+ -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1); -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES); -+ id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA); -+ -+ switch (id) { -+ case 0xbf: -+ for (e = bcma_sflash_sst_tbl; e->name; e++) { -+ if (e->id == id2) -+ break; -+ } -+ break; -+ case 0x13: -+ return -ENOTSUPP; -+ default: -+ for (e = bcma_sflash_st_tbl; e->name; e++) { -+ if (e->id == id) -+ break; -+ } -+ break; -+ } -+ if (!e->name) { -+ bcma_err(bus, "Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", id, id2); -+ return -ENOTSUPP; -+ } -+ -+ break; -+ case BCMA_CC_FLASHT_ATSER: -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS); -+ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c; -+ -+ for (e = bcma_sflash_at_tbl; e->name; e++) { -+ if (e->id == id) -+ break; -+ } -+ if (!e->name) { -+ bcma_err(bus, "Unsupported Atmel serial flash (id: 0x%X)\n", id); -+ return -ENOTSUPP; -+ } -+ -+ break; -+ default: -+ bcma_err(bus, "Unsupported flash type\n"); -+ return -ENOTSUPP; -+ } -+ -+ sflash->window = BCMA_SOC_FLASH2; -+ sflash->blocksize = e->blocksize; -+ sflash->numblocks = e->numblocks; -+ sflash->size = sflash->blocksize * sflash->numblocks; -+ sflash->present = true; -+ -+ bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n", -+ e->name, sflash->size / 1024, sflash->blocksize, -+ sflash->numblocks); -+ -+ /* Prepare platform device, but don't register it yet. It's too early, -+ * malloc (required by device_private_init) is not available yet. */ -+ bcma_sflash_dev.resource[0].end = bcma_sflash_dev.resource[0].start + -+ sflash->size; -+ bcma_sflash_dev.dev.platform_data = sflash; -+ -+ return 0; -+} ---- /dev/null -+++ b/drivers/bcma/driver_gmac_cmn.c -@@ -0,0 +1,14 @@ -+/* -+ * Broadcom specific AMBA -+ * GBIT MAC COMMON Core -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include "bcma_private.h" -+#include -+ -+void __devinit bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) -+{ -+ mutex_init(&gc->phy_mutex); -+} ---- /dev/null -+++ b/drivers/bcma/driver_gpio.c -@@ -0,0 +1,114 @@ -+/* -+ * Broadcom specific AMBA -+ * GPIO driver -+ * -+ * Copyright 2011, Broadcom Corporation -+ * Copyright 2012, Hauke Mehrtens -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include -+#include -+#include -+ -+#include "bcma_private.h" -+ -+static inline struct bcma_drv_cc *bcma_gpio_get_cc(struct gpio_chip *chip) -+{ -+ return container_of(chip, struct bcma_drv_cc, gpio); -+} -+ -+static int bcma_gpio_get_value(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip); -+ -+ return !!bcma_chipco_gpio_in(cc, 1 << gpio); -+} -+ -+static void bcma_gpio_set_value(struct gpio_chip *chip, unsigned gpio, -+ int value) -+{ -+ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip); -+ -+ bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0); -+} -+ -+static int bcma_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip); -+ -+ bcma_chipco_gpio_outen(cc, 1 << gpio, 0); -+ return 0; -+} -+ -+static int bcma_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, -+ int value) -+{ -+ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip); -+ -+ bcma_chipco_gpio_outen(cc, 1 << gpio, 1 << gpio); -+ bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0); -+ return 0; -+} -+ -+static int bcma_gpio_request(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip); -+ -+ bcma_chipco_gpio_control(cc, 1 << gpio, 0); -+ /* clear pulldown */ -+ bcma_chipco_gpio_pulldown(cc, 1 << gpio, 0); -+ /* Set pullup */ -+ bcma_chipco_gpio_pullup(cc, 1 << gpio, 1 << gpio); -+ -+ return 0; -+} -+ -+static void bcma_gpio_free(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip); -+ -+ /* clear pullup */ -+ bcma_chipco_gpio_pullup(cc, 1 << gpio, 0); -+} -+ -+static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip); -+ -+ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC) -+ return bcma_core_irq(cc->core); -+ else -+ return -EINVAL; -+} -+ -+int bcma_gpio_init(struct bcma_drv_cc *cc) -+{ -+ struct gpio_chip *chip = &cc->gpio; -+ -+ chip->label = "bcma_gpio"; -+ chip->owner = THIS_MODULE; -+ chip->request = bcma_gpio_request; -+ chip->free = bcma_gpio_free; -+ chip->get = bcma_gpio_get_value; -+ chip->set = bcma_gpio_set_value; -+ chip->direction_input = bcma_gpio_direction_input; -+ chip->direction_output = bcma_gpio_direction_output; -+ chip->to_irq = bcma_gpio_to_irq; -+ chip->ngpio = 16; -+ /* There is just one SoC in one device and its GPIO addresses should be -+ * deterministic to address them more easily. The other buses could get -+ * a random base number. */ -+ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC) -+ chip->base = 0; -+ else -+ chip->base = -1; -+ -+ return gpiochip_add(chip); -+} -+ -+int bcma_gpio_unregister(struct bcma_drv_cc *cc) -+{ -+ return gpiochip_remove(&cc->gpio); -+} ---- a/drivers/bcma/driver_mips.c -+++ b/drivers/bcma/driver_mips.c -@@ -14,23 +14,45 @@ - - #include - -+#include -+#include - #include - #include - #include - #include - -+static const char * const part_probes[] = { "bcm47xxpart", NULL }; -+ -+static struct physmap_flash_data bcma_pflash_data = { -+ .part_probe_types = part_probes, -+}; -+ -+static struct resource bcma_pflash_resource = { -+ .name = "bcma_pflash", -+ .flags = IORESOURCE_MEM, -+}; -+ -+struct platform_device bcma_pflash_dev = { -+ .name = "physmap-flash", -+ .dev = { -+ .platform_data = &bcma_pflash_data, -+ }, -+ .resource = &bcma_pflash_resource, -+ .num_resources = 1, -+}; -+ - /* The 47162a0 hangs when reading MIPS DMP registers registers */ - static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) - { -- return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && -- dev->id.id == BCMA_CORE_MIPS_74K; -+ return dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM47162 && -+ dev->bus->chipinfo.rev == 0 && dev->id.id == BCMA_CORE_MIPS_74K; - } - - /* The 5357b0 hangs when reading USB20H DMP registers */ - static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) - { -- return (dev->bus->chipinfo.id == 0x5357 || -- dev->bus->chipinfo.id == 0x4749) && -+ return (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 || -+ dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) && - dev->bus->chipinfo.pkg == 11 && - dev->id.id == BCMA_CORE_USB20_HOST; - } -@@ -74,28 +96,41 @@ static u32 bcma_core_mips_irqflag(struct - return dev->core_index; - flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); - -- return flag & 0x1F; -+ if (flag) -+ return flag & 0x1F; -+ else -+ return 0x3f; - } - - /* Get the MIPS IRQ assignment for a specified device. - * If unassigned, 0 is returned. -+ * If disabled, 5 is returned. -+ * If not supported, 6 is returned. - */ --unsigned int bcma_core_mips_irq(struct bcma_device *dev) -+static unsigned int bcma_core_mips_irq(struct bcma_device *dev) - { - struct bcma_device *mdev = dev->bus->drv_mips.core; - u32 irqflag; - unsigned int irq; - - irqflag = bcma_core_mips_irqflag(dev); -+ if (irqflag == 0x3f) -+ return 6; - -- for (irq = 1; irq <= 4; irq++) -+ for (irq = 0; irq <= 4; irq++) - if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & - (1 << irqflag)) - return irq; - -- return 0; -+ return 5; -+} -+ -+unsigned int bcma_core_irq(struct bcma_device *dev) -+{ -+ unsigned int mips_irq = bcma_core_mips_irq(dev); -+ return mips_irq <= 4 ? mips_irq + 2 : 0; - } --EXPORT_SYMBOL(bcma_core_mips_irq); -+EXPORT_SYMBOL(bcma_core_irq); - - static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) - { -@@ -114,8 +149,8 @@ static void bcma_core_mips_set_irq(struc - bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), - bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & - ~(1 << irqflag)); -- else -- bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); -+ else if (oldirq != 5) -+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0); - - /* assign the new one */ - if (irq == 0) { -@@ -123,17 +158,17 @@ static void bcma_core_mips_set_irq(struc - bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | - (1 << irqflag)); - } else { -- u32 oldirqflag = bcma_read32(mdev, -- BCMA_MIPS_MIPS74K_INTMASK(irq)); -- if (oldirqflag) { -+ u32 irqinitmask = bcma_read32(mdev, -+ BCMA_MIPS_MIPS74K_INTMASK(irq)); -+ if (irqinitmask) { - struct bcma_device *core; - - /* backplane irq line is in use, find out who uses - * it and set user to irq 0 - */ -- list_for_each_entry_reverse(core, &bus->cores, list) { -+ list_for_each_entry(core, &bus->cores, list) { - if ((1 << bcma_core_mips_irqflag(core)) == -- oldirqflag) { -+ irqinitmask) { - bcma_core_mips_set_irq(core, 0); - break; - } -@@ -143,15 +178,31 @@ static void bcma_core_mips_set_irq(struc - 1 << irqflag); - } - -- pr_info("set_irq: core 0x%04x, irq %d => %d\n", -- dev->id.id, oldirq + 2, irq + 2); -+ bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n", -+ dev->id.id, oldirq <= 4 ? oldirq + 2 : 0, irq + 2); -+} -+ -+static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq, -+ u16 coreid, u8 unit) -+{ -+ struct bcma_device *core; -+ -+ core = bcma_find_core_unit(bus, coreid, unit); -+ if (!core) { -+ bcma_warn(bus, -+ "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n", -+ coreid, unit); -+ return; -+ } -+ -+ bcma_core_mips_set_irq(core, irq); - } - - static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) - { - int i; - static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; -- printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); -+ printk(KERN_DEBUG KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); - for (i = 0; i <= 6; i++) - printk(" %s%s", irq_name[i], i == irq ? "*" : " "); - printk("\n"); -@@ -161,7 +212,7 @@ static void bcma_core_mips_dump_irq(stru - { - struct bcma_device *core; - -- list_for_each_entry_reverse(core, &bus->cores, list) { -+ list_for_each_entry(core, &bus->cores, list) { - bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); - } - } -@@ -171,9 +222,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips - struct bcma_bus *bus = mcore->core->bus; - - if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) -- return bcma_pmu_get_clockcpu(&bus->drv_cc); -+ return bcma_pmu_get_cpu_clock(&bus->drv_cc); - -- pr_err("No PMU available, need this to get the cpu clock\n"); -+ bcma_err(bus, "No PMU available, need this to get the cpu clock\n"); - return 0; - } - EXPORT_SYMBOL(bcma_cpu_clock); -@@ -181,25 +232,81 @@ EXPORT_SYMBOL(bcma_cpu_clock); - static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) - { - struct bcma_bus *bus = mcore->core->bus; -+ struct bcma_drv_cc *cc = &bus->drv_cc; -+ struct bcma_pflash *pflash = &cc->pflash; - -- switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { -+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { - case BCMA_CC_FLASHT_STSER: - case BCMA_CC_FLASHT_ATSER: -- pr_err("Serial flash not supported.\n"); -+ bcma_debug(bus, "Found serial flash\n"); -+ bcma_sflash_init(cc); - break; - case BCMA_CC_FLASHT_PARA: -- pr_info("found parallel flash.\n"); -- bus->drv_cc.pflash.window = 0x1c000000; -- bus->drv_cc.pflash.window_size = 0x02000000; -+ bcma_debug(bus, "Found parallel flash\n"); -+ pflash->present = true; -+ pflash->window = BCMA_SOC_FLASH2; -+ pflash->window_size = BCMA_SOC_FLASH2_SZ; - -- if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & -+ if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) & - BCMA_CC_FLASH_CFG_DS) == 0) -- bus->drv_cc.pflash.buswidth = 1; -+ pflash->buswidth = 1; - else -- bus->drv_cc.pflash.buswidth = 2; -+ pflash->buswidth = 2; -+ -+ bcma_pflash_data.width = pflash->buswidth; -+ bcma_pflash_resource.start = pflash->window; -+ bcma_pflash_resource.end = pflash->window + pflash->window_size; -+ - break; - default: -- pr_err("flash not supported.\n"); -+ bcma_err(bus, "Flash type not supported\n"); -+ } -+ -+ if (cc->core->id.rev == 38 || -+ bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) { -+ if (cc->capabilities & BCMA_CC_CAP_NFLASH) { -+ bcma_debug(bus, "Found NAND flash\n"); -+ bcma_nflash_init(cc); -+ } -+ } -+} -+ -+void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) -+{ -+ struct bcma_bus *bus = mcore->core->bus; -+ -+ if (mcore->early_setup_done) -+ return; -+ -+ bcma_chipco_serial_init(&bus->drv_cc); -+ bcma_core_mips_flash_detect(mcore); -+ -+ mcore->early_setup_done = true; -+} -+ -+static void bcma_fix_i2s_irqflag(struct bcma_bus *bus) -+{ -+ struct bcma_device *cpu, *pcie, *i2s; -+ -+ /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK) -+ * (IRQ flags > 7 are ignored when setting the interrupt masks) -+ */ -+ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 && -+ bus->chipinfo.id != BCMA_CHIP_ID_BCM4748) -+ return; -+ -+ cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K); -+ pcie = bcma_find_core(bus, BCMA_CORE_PCIE); -+ i2s = bcma_find_core(bus, BCMA_CORE_I2S); -+ if (cpu && pcie && i2s && -+ bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 && -+ bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 && -+ bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) { -+ bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504); -+ bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504); -+ bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87); -+ bcma_debug(bus, -+ "Moved i2s interrupt to oob line 7 instead of 8\n"); - } - } - -@@ -209,48 +316,59 @@ void bcma_core_mips_init(struct bcma_drv - struct bcma_device *core; - bus = mcore->core->bus; - -- pr_info("Initializing MIPS core...\n"); -+ if (mcore->setup_done) -+ return; - -- if (!mcore->setup_done) -- mcore->assigned_irqs = 1; -+ bcma_debug(bus, "Initializing MIPS core...\n"); - -- /* Assign IRQs to all cores on the bus */ -- list_for_each_entry_reverse(core, &bus->cores, list) { -- int mips_irq; -- if (core->irq) -- continue; -- -- mips_irq = bcma_core_mips_irq(core); -- if (mips_irq > 4) -- core->irq = 0; -- else -- core->irq = mips_irq + 2; -- if (core->irq > 5) -- continue; -- switch (core->id.id) { -- case BCMA_CORE_PCI: -- case BCMA_CORE_PCIE: -- case BCMA_CORE_ETHERNET: -- case BCMA_CORE_ETHERNET_GBIT: -- case BCMA_CORE_MAC_GBIT: -- case BCMA_CORE_80211: -- case BCMA_CORE_USB20_HOST: -- /* These devices get their own IRQ line if available, -- * the rest goes on IRQ0 -- */ -- if (mcore->assigned_irqs <= 4) -- bcma_core_mips_set_irq(core, -- mcore->assigned_irqs++); -- break; -+ bcma_core_mips_early_init(mcore); -+ -+ bcma_fix_i2s_irqflag(bus); -+ -+ switch (bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM4716: -+ case BCMA_CHIP_ID_BCM4748: -+ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); -+ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); -+ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); -+ bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0); -+ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); -+ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); -+ break; -+ case BCMA_CHIP_ID_BCM5356: -+ case BCMA_CHIP_ID_BCM47162: -+ case BCMA_CHIP_ID_BCM53572: -+ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); -+ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); -+ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); -+ break; -+ case BCMA_CHIP_ID_BCM5357: -+ case BCMA_CHIP_ID_BCM4749: -+ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); -+ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); -+ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); -+ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); -+ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); -+ break; -+ case BCMA_CHIP_ID_BCM4706: -+ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0); -+ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT, -+ 0); -+ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1); -+ bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0); -+ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON, -+ 0); -+ break; -+ default: -+ list_for_each_entry(core, &bus->cores, list) { -+ core->irq = bcma_core_irq(core); - } -+ bcma_err(bus, -+ "Unknown device (0x%x) found, can not configure IRQs\n", -+ bus->chipinfo.id); - } -- pr_info("IRQ reconfiguration done\n"); -+ bcma_debug(bus, "IRQ reconfiguration done\n"); - bcma_core_mips_dump_irq(bus); - -- if (mcore->setup_done) -- return; -- -- bcma_chipco_serial_init(&bus->drv_cc); -- bcma_core_mips_flash_detect(mcore); - mcore->setup_done = true; - } ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -2,8 +2,9 @@ - * Broadcom specific AMBA - * PCI Core - * -- * Copyright 2005, Broadcom Corporation -+ * Copyright 2005, 2011, Broadcom Corporation - * Copyright 2006, 2007, Michael Buesch -+ * Copyright 2011, 2012, Hauke Mehrtens - * - * Licensed under the GNU/GPL. See COPYING for details. - */ -@@ -16,120 +17,131 @@ - * R/W ops. - **************************************************/ - --static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) -+u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) - { -- pcicore_write32(pc, 0x130, address); -- pcicore_read32(pc, 0x130); -- return pcicore_read32(pc, 0x134); -+ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); -+ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); -+ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); - } - --#if 0 - static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) - { -- pcicore_write32(pc, 0x130, address); -- pcicore_read32(pc, 0x130); -- pcicore_write32(pc, 0x134, data); -+ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); -+ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); -+ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); - } --#endif - --static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) -+static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy) - { -- const u16 mdio_control = 0x128; -- const u16 mdio_data = 0x12C; - u32 v; - int i; - -- v = (1 << 30); /* Start of Transaction */ -- v |= (1 << 28); /* Write Transaction */ -- v |= (1 << 17); /* Turnaround */ -- v |= (0x1F << 18); -+ v = BCMA_CORE_PCI_MDIODATA_START; -+ v |= BCMA_CORE_PCI_MDIODATA_WRITE; -+ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << -+ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); -+ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << -+ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); -+ v |= BCMA_CORE_PCI_MDIODATA_TA; - v |= (phy << 4); -- pcicore_write32(pc, mdio_data, v); -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); - - udelay(10); - for (i = 0; i < 200; i++) { -- v = pcicore_read32(pc, mdio_control); -- if (v & 0x100 /* Trans complete */) -+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); -+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) - break; -- msleep(1); -+ usleep_range(1000, 2000); - } - } - --static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) -+static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address) - { -- const u16 mdio_control = 0x128; -- const u16 mdio_data = 0x12C; - int max_retries = 10; - u16 ret = 0; - u32 v; - int i; - -- v = 0x80; /* Enable Preamble Sequence */ -- v |= 0x2; /* MDIO Clock Divisor */ -- pcicore_write32(pc, mdio_control, v); -+ /* enable mdio access to SERDES */ -+ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; -+ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); - - if (pc->core->id.rev >= 10) { - max_retries = 200; - bcma_pcie_mdio_set_phy(pc, device); -+ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << -+ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); -+ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); -+ } else { -+ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); -+ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); - } - -- v = (1 << 30); /* Start of Transaction */ -- v |= (1 << 29); /* Read Transaction */ -- v |= (1 << 17); /* Turnaround */ -- if (pc->core->id.rev < 10) -- v |= (u32)device << 22; -- v |= (u32)address << 18; -- pcicore_write32(pc, mdio_data, v); -+ v = BCMA_CORE_PCI_MDIODATA_START; -+ v |= BCMA_CORE_PCI_MDIODATA_READ; -+ v |= BCMA_CORE_PCI_MDIODATA_TA; -+ -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); - /* Wait for the device to complete the transaction */ - udelay(10); - for (i = 0; i < max_retries; i++) { -- v = pcicore_read32(pc, mdio_control); -- if (v & 0x100 /* Trans complete */) { -+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); -+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { - udelay(10); -- ret = pcicore_read32(pc, mdio_data); -+ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); - break; - } -- msleep(1); -+ usleep_range(1000, 2000); - } -- pcicore_write32(pc, mdio_control, 0); -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); - return ret; - } - --static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, -+static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device, - u8 address, u16 data) - { -- const u16 mdio_control = 0x128; -- const u16 mdio_data = 0x12C; - int max_retries = 10; - u32 v; - int i; - -- v = 0x80; /* Enable Preamble Sequence */ -- v |= 0x2; /* MDIO Clock Divisor */ -- pcicore_write32(pc, mdio_control, v); -+ /* enable mdio access to SERDES */ -+ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; -+ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); - - if (pc->core->id.rev >= 10) { - max_retries = 200; - bcma_pcie_mdio_set_phy(pc, device); -+ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << -+ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); -+ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); -+ } else { -+ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); -+ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); - } - -- v = (1 << 30); /* Start of Transaction */ -- v |= (1 << 28); /* Write Transaction */ -- v |= (1 << 17); /* Turnaround */ -- if (pc->core->id.rev < 10) -- v |= (u32)device << 22; -- v |= (u32)address << 18; -+ v = BCMA_CORE_PCI_MDIODATA_START; -+ v |= BCMA_CORE_PCI_MDIODATA_WRITE; -+ v |= BCMA_CORE_PCI_MDIODATA_TA; - v |= data; -- pcicore_write32(pc, mdio_data, v); -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); - /* Wait for the device to complete the transaction */ - udelay(10); - for (i = 0; i < max_retries; i++) { -- v = pcicore_read32(pc, mdio_control); -- if (v & 0x100 /* Trans complete */) -+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); -+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) - break; -- msleep(1); -+ usleep_range(1000, 2000); - } -- pcicore_write32(pc, mdio_control, 0); -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); -+} -+ -+static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device, -+ u8 address, u16 data) -+{ -+ bcma_pcie_mdio_write(pc, device, address, data); -+ return bcma_pcie_mdio_read(pc, device, address); - } - - /************************************************** -@@ -138,88 +150,134 @@ static void bcma_pcie_mdio_write(struct - - static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) - { -- return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; -+ u32 tmp; -+ -+ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); -+ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) -+ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | -+ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; -+ else -+ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; - } - - static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) - { -- const u8 serdes_pll_device = 0x1D; -- const u8 serdes_rx_device = 0x1F; - u16 tmp; - -- bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, -- bcma_pcicore_polarity_workaround(pc)); -- tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); -- if (tmp & 0x4000) -- bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); -+ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, -+ BCMA_CORE_PCI_SERDES_RX_CTRL, -+ bcma_pcicore_polarity_workaround(pc)); -+ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, -+ BCMA_CORE_PCI_SERDES_PLL_CTRL); -+ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) -+ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, -+ BCMA_CORE_PCI_SERDES_PLL_CTRL, -+ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); -+} -+ -+static void bcma_core_pci_fixcfg(struct bcma_drv_pci *pc) -+{ -+ struct bcma_device *core = pc->core; -+ u16 val16, core_index; -+ uint regoff; -+ -+ regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_PI_OFFSET); -+ core_index = (u16)core->core_index; -+ -+ val16 = pcicore_read16(pc, regoff); -+ if (((val16 & BCMA_CORE_PCI_SPROM_PI_MASK) >> BCMA_CORE_PCI_SPROM_PI_SHIFT) -+ != core_index) { -+ val16 = (core_index << BCMA_CORE_PCI_SPROM_PI_SHIFT) | -+ (val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK); -+ pcicore_write16(pc, regoff, val16); -+ } -+} -+ -+/* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */ -+/* Needs to happen when coming out of 'standby'/'hibernate' */ -+static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc) -+{ -+ u16 val16; -+ uint regoff; -+ -+ regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_MISC_CONFIG); -+ -+ val16 = pcicore_read16(pc, regoff); -+ -+ if (!(val16 & BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST)) { -+ val16 |= BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST; -+ pcicore_write16(pc, regoff, val16); -+ } - } - - /************************************************** - * Init. - **************************************************/ - --static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) -+static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) - { -+ bcma_core_pci_fixcfg(pc); - bcma_pcicore_serdes_workaround(pc); -+ bcma_core_pci_config_fixup(pc); - } - --static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) --{ -- struct bcma_bus *bus = pc->core->bus; -- u16 chipid_top; -- -- chipid_top = (bus->chipinfo.id & 0xFF00); -- if (chipid_top != 0x4700 && -- chipid_top != 0x5300) -- return false; -- --#ifdef CONFIG_SSB_DRIVER_PCICORE -- if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) -- return false; --#endif /* CONFIG_SSB_DRIVER_PCICORE */ -- --#if 0 -- /* TODO: on BCMA we use address from EROM instead of magic formula */ -- u32 tmp; -- return !mips_busprobe32(tmp, (bus->mmio + -- (pc->core->core_index * BCMA_CORE_SIZE))); --#endif -- -- return true; --} -- --void bcma_core_pci_init(struct bcma_drv_pci *pc) -+void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) - { - if (pc->setup_done) - return; - -- if (bcma_core_pci_is_in_hostmode(pc)) { - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+ pc->hostmode = bcma_core_pci_is_in_hostmode(pc); -+ if (pc->hostmode) - bcma_core_pci_hostmode_init(pc); --#else -- pr_err("Driver compiled without support for hostmode PCI\n"); - #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ -- } else { -+ -+ if (!pc->hostmode) - bcma_core_pci_clientmode_init(pc); -- } -+} -+ -+void bcma_core_pci_power_save(struct bcma_bus *bus, bool up) -+{ -+ struct bcma_drv_pci *pc; -+ u16 data; - -- pc->setup_done = true; -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { -+ data = up ? 0x74 : 0x7C; -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); -+ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { -+ data = up ? 0x75 : 0x7D; -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); -+ } - } -+EXPORT_SYMBOL_GPL(bcma_core_pci_power_save); - - int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, - bool enable) - { -- struct pci_dev *pdev = pc->core->bus->host_pci; -+ struct pci_dev *pdev; - u32 coremask, tmp; - int err = 0; - -- if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { -+ if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) { - /* This bcma device is not on a PCI host-bus. So the IRQs are - * not routed through the PCI core. - * So we must not enable routing through the PCI core. */ - goto out; - } - -+ pdev = pc->core->bus->host_pci; -+ - err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); - if (err) - goto out; -@@ -236,3 +294,42 @@ out: - return err; - } - EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); -+ -+static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) -+{ -+ u32 w; -+ -+ w = bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); -+ if (extend) -+ w |= BCMA_CORE_PCI_ASPMTIMER_EXTEND; -+ else -+ w &= ~BCMA_CORE_PCI_ASPMTIMER_EXTEND; -+ bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); -+ bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); -+} -+ -+void bcma_core_pci_up(struct bcma_bus *bus) -+{ -+ struct bcma_drv_pci *pc; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ bcma_core_pci_extend_L1timer(pc, true); -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_up); -+ -+void bcma_core_pci_down(struct bcma_bus *bus) -+{ -+ struct bcma_drv_pci *pc; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ bcma_core_pci_extend_L1timer(pc, false); -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_down); ---- a/drivers/bcma/driver_pci_host.c -+++ b/drivers/bcma/driver_pci_host.c -@@ -2,13 +2,622 @@ - * Broadcom specific AMBA - * PCI Core in hostmode - * -+ * Copyright 2005 - 2011, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch -+ * Copyright 2011, 2012, Hauke Mehrtens -+ * - * Licensed under the GNU/GPL. See COPYING for details. - */ - - #include "bcma_private.h" -+#include -+#include - #include -+#include -+ -+/* Probe a 32bit value on the bus and catch bus exceptions. -+ * Returns nonzero on a bus exception. -+ * This is MIPS specific */ -+#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) -+ -+/* Assume one-hot slot wiring */ -+#define BCMA_PCI_SLOT_MAX 16 -+#define PCI_CONFIG_SPACE_SIZE 256 -+ -+bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ u16 chipid_top; -+ u32 tmp; -+ -+ chipid_top = (bus->chipinfo.id & 0xFF00); -+ if (chipid_top != 0x4700 && -+ chipid_top != 0x5300) -+ return false; -+ -+ bcma_core_enable(pc->core, 0); -+ -+ return !mips_busprobe32(tmp, pc->core->io_addr); -+} -+ -+static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) -+{ -+ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); -+ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); -+ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); -+} -+ -+static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, -+ u32 data) -+{ -+ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); -+ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); -+ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); -+} -+ -+static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, -+ unsigned int func, unsigned int off) -+{ -+ u32 addr = 0; -+ -+ /* Issue config commands only when the data link is up (atleast -+ * one external pcie device is present). -+ */ -+ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) -+ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) -+ goto out; -+ -+ /* Type 0 transaction */ -+ /* Slide the PCI window to the appropriate slot */ -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); -+ /* Calculate the address */ -+ addr = pc->host_controller->host_cfg_addr; -+ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); -+ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); -+ addr |= (off & ~3); -+ -+out: -+ return addr; -+} -+ -+static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, -+ unsigned int func, unsigned int off, -+ void *buf, int len) -+{ -+ int err = -EINVAL; -+ u32 addr, val; -+ void __iomem *mmio = 0; -+ -+ WARN_ON(!pc->hostmode); -+ if (unlikely(len != 1 && len != 2 && len != 4)) -+ goto out; -+ if (dev == 0) { -+ /* we support only two functions on device 0 */ -+ if (func > 1) -+ goto out; -+ -+ /* accesses to config registers with offsets >= 256 -+ * requires indirect access. -+ */ -+ if (off >= PCI_CONFIG_SPACE_SIZE) { -+ addr = (func << 12); -+ addr |= (off & 0x0FFC); -+ val = bcma_pcie_read_config(pc, addr); -+ } else { -+ addr = BCMA_CORE_PCI_PCICFG0; -+ addr |= (func << 8); -+ addr |= (off & 0xFC); -+ val = pcicore_read32(pc, addr); -+ } -+ } else { -+ addr = bcma_get_cfgspace_addr(pc, dev, func, off); -+ if (unlikely(!addr)) -+ goto out; -+ err = -ENOMEM; -+ mmio = ioremap_nocache(addr, sizeof(val)); -+ if (!mmio) -+ goto out; -+ -+ if (mips_busprobe32(val, mmio)) { -+ val = 0xFFFFFFFF; -+ goto unmap; -+ } -+ } -+ val >>= (8 * (off & 3)); -+ -+ switch (len) { -+ case 1: -+ *((u8 *)buf) = (u8)val; -+ break; -+ case 2: -+ *((u16 *)buf) = (u16)val; -+ break; -+ case 4: -+ *((u32 *)buf) = (u32)val; -+ break; -+ } -+ err = 0; -+unmap: -+ if (mmio) -+ iounmap(mmio); -+out: -+ return err; -+} - --void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) -+static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, -+ unsigned int func, unsigned int off, -+ const void *buf, int len) - { -- pr_err("No support for PCI core in hostmode yet\n"); -+ int err = -EINVAL; -+ u32 addr, val; -+ void __iomem *mmio = 0; -+ u16 chipid = pc->core->bus->chipinfo.id; -+ -+ WARN_ON(!pc->hostmode); -+ if (unlikely(len != 1 && len != 2 && len != 4)) -+ goto out; -+ if (dev == 0) { -+ /* we support only two functions on device 0 */ -+ if (func > 1) -+ goto out; -+ -+ /* accesses to config registers with offsets >= 256 -+ * requires indirect access. -+ */ -+ if (off >= PCI_CONFIG_SPACE_SIZE) { -+ addr = (func << 12); -+ addr |= (off & 0x0FFC); -+ val = bcma_pcie_read_config(pc, addr); -+ } else { -+ addr = BCMA_CORE_PCI_PCICFG0; -+ addr |= (func << 8); -+ addr |= (off & 0xFC); -+ val = pcicore_read32(pc, addr); -+ } -+ } else { -+ addr = bcma_get_cfgspace_addr(pc, dev, func, off); -+ if (unlikely(!addr)) -+ goto out; -+ err = -ENOMEM; -+ mmio = ioremap_nocache(addr, sizeof(val)); -+ if (!mmio) -+ goto out; -+ -+ if (mips_busprobe32(val, mmio)) { -+ val = 0xFFFFFFFF; -+ goto unmap; -+ } -+ } -+ -+ switch (len) { -+ case 1: -+ val &= ~(0xFF << (8 * (off & 3))); -+ val |= *((const u8 *)buf) << (8 * (off & 3)); -+ break; -+ case 2: -+ val &= ~(0xFFFF << (8 * (off & 3))); -+ val |= *((const u16 *)buf) << (8 * (off & 3)); -+ break; -+ case 4: -+ val = *((const u32 *)buf); -+ break; -+ } -+ if (dev == 0) { -+ /* accesses to config registers with offsets >= 256 -+ * requires indirect access. -+ */ -+ if (off >= PCI_CONFIG_SPACE_SIZE) -+ bcma_pcie_write_config(pc, addr, val); -+ else -+ pcicore_write32(pc, addr, val); -+ } else { -+ writel(val, mmio); -+ -+ if (chipid == BCMA_CHIP_ID_BCM4716 || -+ chipid == BCMA_CHIP_ID_BCM4748) -+ readl(mmio); -+ } -+ -+ err = 0; -+unmap: -+ if (mmio) -+ iounmap(mmio); -+out: -+ return err; -+} -+ -+static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, -+ unsigned int devfn, -+ int reg, int size, u32 *val) -+{ -+ unsigned long flags; -+ int err; -+ struct bcma_drv_pci *pc; -+ struct bcma_drv_pci_host *pc_host; -+ -+ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); -+ pc = pc_host->pdev; -+ -+ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); -+ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), -+ PCI_FUNC(devfn), reg, val, size); -+ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); -+ -+ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, -+ unsigned int devfn, -+ int reg, int size, u32 val) -+{ -+ unsigned long flags; -+ int err; -+ struct bcma_drv_pci *pc; -+ struct bcma_drv_pci_host *pc_host; -+ -+ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); -+ pc = pc_host->pdev; -+ -+ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); -+ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), -+ PCI_FUNC(devfn), reg, &val, size); -+ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); -+ -+ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+/* return cap_offset if requested capability exists in the PCI config space */ -+static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, -+ unsigned int dev, -+ unsigned int func, u8 req_cap_id, -+ unsigned char *buf, u32 *buflen) -+{ -+ u8 cap_id; -+ u8 cap_ptr = 0; -+ u32 bufsize; -+ u8 byte_val; -+ -+ /* check for Header type 0 */ -+ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, -+ sizeof(u8)); -+ if ((byte_val & 0x7F) != PCI_HEADER_TYPE_NORMAL) -+ return cap_ptr; -+ -+ /* check if the capability pointer field exists */ -+ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, -+ sizeof(u8)); -+ if (!(byte_val & PCI_STATUS_CAP_LIST)) -+ return cap_ptr; -+ -+ /* check if the capability pointer is 0x00 */ -+ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, -+ sizeof(u8)); -+ if (cap_ptr == 0x00) -+ return cap_ptr; -+ -+ /* loop thr'u the capability list and see if the requested capabilty -+ * exists */ -+ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); -+ while (cap_id != req_cap_id) { -+ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, -+ sizeof(u8)); -+ if (cap_ptr == 0x00) -+ return cap_ptr; -+ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, -+ sizeof(u8)); -+ } -+ -+ /* found the caller requested capability */ -+ if ((buf != NULL) && (buflen != NULL)) { -+ u8 cap_data; -+ -+ bufsize = *buflen; -+ if (!bufsize) -+ return cap_ptr; -+ -+ *buflen = 0; -+ -+ /* copy the cpability data excluding cap ID and next ptr */ -+ cap_data = cap_ptr + 2; -+ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) -+ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; -+ *buflen = bufsize; -+ while (bufsize--) { -+ bcma_extpci_read_config(pc, dev, func, cap_data, buf, -+ sizeof(u8)); -+ cap_data++; -+ buf++; -+ } -+ } -+ -+ return cap_ptr; -+} -+ -+/* If the root port is capable of returning Config Request -+ * Retry Status (CRS) Completion Status to software then -+ * enable the feature. -+ */ -+static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ u8 cap_ptr, root_ctrl, root_cap, dev; -+ u16 val16; -+ int i; -+ -+ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, -+ NULL); -+ root_cap = cap_ptr + PCI_EXP_RTCAP; -+ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); -+ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { -+ /* Enable CRS software visibility */ -+ root_ctrl = cap_ptr + PCI_EXP_RTCTL; -+ val16 = PCI_EXP_RTCTL_CRSSVE; -+ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, -+ sizeof(u16)); -+ -+ /* Initiate a configuration request to read the vendor id -+ * field of the device function's config space header after -+ * 100 ms wait time from the end of Reset. If the device is -+ * not done with its internal initialization, it must at -+ * least return a completion TLP, with a completion status -+ * of "Configuration Request Retry Status (CRS)". The root -+ * complex must complete the request to the host by returning -+ * a read-data value of 0001h for the Vendor ID field and -+ * all 1s for any additional bytes included in the request. -+ * Poll using the config reads for max wait time of 1 sec or -+ * until we receive the successful completion status. Repeat -+ * the procedure for all the devices. -+ */ -+ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { -+ for (i = 0; i < 100000; i++) { -+ bcma_extpci_read_config(pc, dev, 0, -+ PCI_VENDOR_ID, &val16, -+ sizeof(val16)); -+ if (val16 != 0x1) -+ break; -+ udelay(10); -+ } -+ if (val16 == 0x1) -+ bcma_err(bus, "PCI: Broken device in slot %d\n", -+ dev); -+ } -+ } -+} -+ -+void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ struct bcma_drv_pci_host *pc_host; -+ u32 tmp; -+ u32 pci_membase_1G; -+ unsigned long io_map_base; -+ -+ bcma_info(bus, "PCIEcore in host mode found\n"); -+ -+ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { -+ bcma_info(bus, "This PCIE core is disabled and not working\n"); -+ return; -+ } -+ -+ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); -+ if (!pc_host) { -+ bcma_err(bus, "can not allocate memory"); -+ return; -+ } -+ -+ spin_lock_init(&pc_host->cfgspace_lock); -+ -+ pc->host_controller = pc_host; -+ pc_host->pci_controller.io_resource = &pc_host->io_resource; -+ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; -+ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; -+ pc_host->pdev = pc; -+ -+ pci_membase_1G = BCMA_SOC_PCI_DMA; -+ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; -+ -+ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; -+ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; -+ -+ pc_host->mem_resource.name = "BCMA PCIcore external memory", -+ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; -+ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; -+ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; -+ -+ pc_host->io_resource.name = "BCMA PCIcore external I/O", -+ pc_host->io_resource.start = 0x100; -+ pc_host->io_resource.end = 0x7FF; -+ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; -+ -+ /* Reset RC */ -+ usleep_range(3000, 5000); -+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); -+ msleep(50); -+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | -+ BCMA_CORE_PCI_CTL_RST_OE); -+ -+ /* 64 MB I/O access window. On 4716, use -+ * sbtopcie0 to access the device registers. We -+ * can't use address match 2 (1 GB window) region -+ * as mips can't generate 64-bit address on the -+ * backplane. -+ */ -+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4716 || -+ bus->chipinfo.id == BCMA_CHIP_ID_BCM4748) { -+ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; -+ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + -+ BCMA_SOC_PCI_MEM_SZ - 1; -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); -+ } else if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) { -+ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; -+ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; -+ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; -+ if (pc->core->core_unit == 0) { -+ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; -+ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + -+ BCMA_SOC_PCI_MEM_SZ - 1; -+ pc_host->io_resource.start = 0x100; -+ pc_host->io_resource.end = 0x47F; -+ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ tmp | BCMA_SOC_PCI_MEM); -+ } else if (pc->core->core_unit == 1) { -+ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; -+ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + -+ BCMA_SOC_PCI_MEM_SZ - 1; -+ pc_host->io_resource.start = 0x480; -+ pc_host->io_resource.end = 0x7FF; -+ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; -+ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ tmp | BCMA_SOC_PCI1_MEM); -+ } -+ } else -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ BCMA_CORE_PCI_SBTOPCI_IO); -+ -+ /* 64 MB configuration access window */ -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); -+ -+ /* 1 GB memory access window */ -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, -+ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); -+ -+ -+ /* As per PCI Express Base Spec 1.1 we need to wait for -+ * at least 100 ms from the end of a reset (cold/warm/hot) -+ * before issuing configuration requests to PCI Express -+ * devices. -+ */ -+ msleep(100); -+ -+ bcma_core_pci_enable_crs(pc); -+ -+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 || -+ bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) { -+ u16 val16; -+ bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL, -+ &val16, sizeof(val16)); -+ val16 |= (2 << 5); /* Max payload size of 512 */ -+ val16 |= (2 << 12); /* MRRS 512 */ -+ bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL, -+ &val16, sizeof(val16)); -+ } -+ -+ /* Enable PCI bridge BAR0 memory & master access */ -+ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; -+ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); -+ -+ /* Enable PCI interrupts */ -+ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); -+ -+ /* Ok, ready to run, register it to the system. -+ * The following needs change, if we want to port hostmode -+ * to non-MIPS platform. */ -+ io_map_base = (unsigned long)ioremap_nocache(pc_host->mem_resource.start, -+ resource_size(&pc_host->mem_resource)); -+ pc_host->pci_controller.io_map_base = io_map_base; -+ set_io_port_base(pc_host->pci_controller.io_map_base); -+ /* Give some time to the PCI controller to configure itself with the new -+ * values. Not waiting at this point causes crashes of the machine. */ -+ usleep_range(10000, 15000); -+ register_pci_controller(&pc_host->pci_controller); -+ return; -+} -+ -+/* Early PCI fixup for a device on the PCI-core bridge. */ -+static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) -+{ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return; -+ } -+ if (PCI_SLOT(dev->devfn) != 0) -+ return; -+ -+ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); -+ -+ /* Enable PCI bridge bus mastering and memory space */ -+ pci_set_master(dev); -+ if (pcibios_enable_device(dev, ~0) < 0) { -+ pr_err("PCI: BCMA bridge enable failed\n"); -+ return; -+ } -+ -+ /* Enable PCI bridge BAR1 prefetch and burst */ -+ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); -+} -+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); -+ -+/* Early PCI fixup for all PCI-cores to set the correct memory address. */ -+static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) -+{ -+ struct resource *res; -+ int pos, err; -+ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return; -+ } -+ if (PCI_SLOT(dev->devfn) == 0) -+ return; -+ -+ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); -+ -+ for (pos = 0; pos < 6; pos++) { -+ res = &dev->resource[pos]; -+ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) { -+ err = pci_assign_resource(dev, pos); -+ if (err) -+ pr_err("PCI: Problem fixing up the addresses on %s\n", -+ pci_name(dev)); -+ } -+ } -+} -+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); -+ -+/* This function is called when doing a pci_enable_device(). -+ * We must first check if the device is a device on the PCI-core bridge. */ -+int bcma_core_pci_plat_dev_init(struct pci_dev *dev) -+{ -+ struct bcma_drv_pci_host *pc_host; -+ int readrq; -+ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return -ENODEV; -+ } -+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, -+ pci_ops); -+ -+ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); -+ -+ /* Fix up interrupt lines */ -+ dev->irq = bcma_core_irq(pc_host->pdev->core); -+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); -+ -+ readrq = pcie_get_readrq(dev); -+ if (readrq > 128) { -+ pr_info("change PCIe max read request size from %i to 128\n", readrq); -+ pcie_set_readrq(dev, 128); -+ } -+ return 0; -+} -+EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); -+ -+/* PCI device IRQ mapping. */ -+int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) -+{ -+ struct bcma_drv_pci_host *pc_host; -+ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return -ENODEV; -+ } -+ -+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, -+ pci_ops); -+ return bcma_core_irq(pc_host->pdev->core); - } -+EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); ---- a/drivers/bcma/host_pci.c -+++ b/drivers/bcma/host_pci.c -@@ -18,7 +18,7 @@ static void bcma_host_pci_switch_core(st - pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2, - core->wrap); - core->bus->mapped_core = core; -- pr_debug("Switched to core: 0x%X\n", core->id.id); -+ bcma_debug(core->bus, "Switched to core: 0x%X\n", core->id.id); - } - - /* Provides access to the requested core. Returns base offset that has to be -@@ -77,8 +77,8 @@ static void bcma_host_pci_write32(struct - } - - #ifdef CONFIG_BCMA_BLOCKIO --void bcma_host_pci_block_read(struct bcma_device *core, void *buffer, -- size_t count, u16 offset, u8 reg_width) -+static void bcma_host_pci_block_read(struct bcma_device *core, void *buffer, -+ size_t count, u16 offset, u8 reg_width) - { - void __iomem *addr = core->bus->mmio + offset; - if (core->bus->mapped_core != core) -@@ -100,8 +100,9 @@ void bcma_host_pci_block_read(struct bcm - } - } - --void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer, -- size_t count, u16 offset, u8 reg_width) -+static void bcma_host_pci_block_write(struct bcma_device *core, -+ const void *buffer, size_t count, -+ u16 offset, u8 reg_width) - { - void __iomem *addr = core->bus->mmio + offset; - if (core->bus->mapped_core != core) -@@ -139,7 +140,7 @@ static void bcma_host_pci_awrite32(struc - iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset); - } - --const struct bcma_host_ops bcma_host_pci_ops = { -+static const struct bcma_host_ops bcma_host_pci_ops = { - .read8 = bcma_host_pci_read8, - .read16 = bcma_host_pci_read16, - .read32 = bcma_host_pci_read32, -@@ -154,8 +155,8 @@ const struct bcma_host_ops bcma_host_pci - .awrite32 = bcma_host_pci_awrite32, - }; - --static int bcma_host_pci_probe(struct pci_dev *dev, -- const struct pci_device_id *id) -+static int __devinit bcma_host_pci_probe(struct pci_dev *dev, -+ const struct pci_device_id *id) - { - struct bcma_bus *bus; - int err = -ENOMEM; -@@ -188,7 +189,7 @@ static int bcma_host_pci_probe(struct pc - - /* SSB needed additional powering up, do we have any AMBA PCI cards? */ - if (!pci_is_pcie(dev)) -- pr_err("PCI card detected, report problems.\n"); -+ bcma_err(bus, "PCI card detected, report problems.\n"); - - /* Map MMIO */ - err = -ENOMEM; -@@ -201,6 +202,9 @@ static int bcma_host_pci_probe(struct pc - bus->hosttype = BCMA_HOSTTYPE_PCI; - bus->ops = &bcma_host_pci_ops; - -+ bus->boardinfo.vendor = bus->host_pci->subsystem_vendor; -+ bus->boardinfo.type = bus->host_pci->subsystem_device; -+ - /* Register */ - err = bcma_bus_register(bus); - if (err) -@@ -222,7 +226,7 @@ err_kfree_bus: - return err; - } - --static void bcma_host_pci_remove(struct pci_dev *dev) -+static void __devexit bcma_host_pci_remove(struct pci_dev *dev) - { - struct bcma_bus *bus = pci_get_drvdata(dev); - -@@ -234,7 +238,7 @@ static void bcma_host_pci_remove(struct - pci_set_drvdata(dev, NULL); - } - --#ifdef CONFIG_PM -+#ifdef CONFIG_PM_SLEEP - static int bcma_host_pci_suspend(struct device *dev) - { - struct pci_dev *pdev = to_pci_dev(dev); -@@ -257,17 +261,21 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc - bcma_host_pci_resume); - #define BCMA_PM_OPS (&bcma_pm_ops) - --#else /* CONFIG_PM */ -+#else /* CONFIG_PM_SLEEP */ - - #define BCMA_PM_OPS NULL - --#endif /* CONFIG_PM */ -+#endif /* CONFIG_PM_SLEEP */ - - static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, - { 0, }, - }; -@@ -277,7 +285,7 @@ static struct pci_driver bcma_pci_bridge - .name = "bcma-pci-bridge", - .id_table = bcma_pci_bridge_tbl, - .probe = bcma_host_pci_probe, -- .remove = bcma_host_pci_remove, -+ .remove = __devexit_p(bcma_host_pci_remove), - .driver.pm = BCMA_PM_OPS, - }; - ---- a/drivers/bcma/host_soc.c -+++ b/drivers/bcma/host_soc.c -@@ -143,7 +143,7 @@ static void bcma_host_soc_awrite32(struc - writel(value, core->io_wrap + offset); - } - --const struct bcma_host_ops bcma_host_soc_ops = { -+static const struct bcma_host_ops bcma_host_soc_ops = { - .read8 = bcma_host_soc_read8, - .read16 = bcma_host_soc_read16, - .read32 = bcma_host_soc_read32, ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -7,12 +7,19 @@ - - #include "bcma_private.h" - #include -+#include - #include - #include - - MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); - MODULE_LICENSE("GPL"); - -+/* contains the number the next bus should get. */ -+static unsigned int bcma_bus_next_num = 0; -+ -+/* bcma_buses_mutex locks the bcma_bus_next_num */ -+static DEFINE_MUTEX(bcma_buses_mutex); -+ - static int bcma_bus_match(struct device *dev, struct device_driver *drv); - static int bcma_device_probe(struct device *dev); - static int bcma_device_remove(struct device *dev); -@@ -55,7 +62,14 @@ static struct bus_type bcma_bus_type = { - .dev_attrs = bcma_device_attrs, - }; - --static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) -+static u16 bcma_cc_core_id(struct bcma_bus *bus) -+{ -+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) -+ return BCMA_CORE_4706_CHIPCOMMON; -+ return BCMA_CORE_CHIPCOMMON; -+} -+ -+struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) - { - struct bcma_device *core; - -@@ -65,6 +79,38 @@ static struct bcma_device *bcma_find_cor - } - return NULL; - } -+EXPORT_SYMBOL_GPL(bcma_find_core); -+ -+struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, -+ u8 unit) -+{ -+ struct bcma_device *core; -+ -+ list_for_each_entry(core, &bus->cores, list) { -+ if (core->id.id == coreid && core->core_unit == unit) -+ return core; -+ } -+ return NULL; -+} -+ -+bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value, -+ int timeout) -+{ -+ unsigned long deadline = jiffies + timeout; -+ u32 val; -+ -+ do { -+ val = bcma_read32(core, reg); -+ if ((val & mask) == value) -+ return true; -+ cpu_relax(); -+ udelay(10); -+ } while (!time_after_eq(jiffies, deadline)); -+ -+ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg); -+ -+ return false; -+} - - static void bcma_release_core_dev(struct device *dev) - { -@@ -84,16 +130,23 @@ static int bcma_register_cores(struct bc - list_for_each_entry(core, &bus->cores, list) { - /* We support that cores ourself */ - switch (core->id.id) { -+ case BCMA_CORE_4706_CHIPCOMMON: - case BCMA_CORE_CHIPCOMMON: - case BCMA_CORE_PCI: - case BCMA_CORE_PCIE: - case BCMA_CORE_MIPS_74K: -+ case BCMA_CORE_4706_MAC_GBIT_COMMON: - continue; - } - -+ /* Only first GMAC core on BCM4706 is connected and working */ -+ if (core->id.id == BCMA_CORE_4706_MAC_GBIT && -+ core->core_unit > 0) -+ continue; -+ - core->dev.release = bcma_release_core_dev; - core->dev.bus = &bcma_bus_type; -- dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); -+ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); - - switch (bus->hosttype) { - case BCMA_HOSTTYPE_PCI: -@@ -111,41 +164,98 @@ static int bcma_register_cores(struct bc - - err = device_register(&core->dev); - if (err) { -- pr_err("Could not register dev for core 0x%03X\n", -- core->id.id); -+ bcma_err(bus, -+ "Could not register dev for core 0x%03X\n", -+ core->id.id); - continue; - } - core->dev_registered = true; - dev_id++; - } - -+#ifdef CONFIG_BCMA_DRIVER_MIPS -+ if (bus->drv_cc.pflash.present) { -+ err = platform_device_register(&bcma_pflash_dev); -+ if (err) -+ bcma_err(bus, "Error registering parallel flash\n"); -+ } -+#endif -+ -+#ifdef CONFIG_BCMA_SFLASH -+ if (bus->drv_cc.sflash.present) { -+ err = platform_device_register(&bcma_sflash_dev); -+ if (err) -+ bcma_err(bus, "Error registering serial flash\n"); -+ } -+#endif -+ -+#ifdef CONFIG_BCMA_NFLASH -+ if (bus->drv_cc.nflash.present) { -+ err = platform_device_register(&bcma_nflash_dev); -+ if (err) -+ bcma_err(bus, "Error registering NAND flash\n"); -+ } -+#endif -+ err = bcma_gpio_init(&bus->drv_cc); -+ if (err == -ENOTSUPP) -+ bcma_debug(bus, "GPIO driver not activated\n"); -+ else if (err) -+ bcma_err(bus, "Error registering GPIO driver: %i\n", err); -+ -+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { -+ err = bcma_chipco_watchdog_register(&bus->drv_cc); -+ if (err) -+ bcma_err(bus, "Error registering watchdog driver\n"); -+ } -+ - return 0; - } - - static void bcma_unregister_cores(struct bcma_bus *bus) - { -- struct bcma_device *core; -+ struct bcma_device *core, *tmp; - -- list_for_each_entry(core, &bus->cores, list) { -+ list_for_each_entry_safe(core, tmp, &bus->cores, list) { -+ list_del(&core->list); - if (core->dev_registered) - device_unregister(&core->dev); - } -+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) -+ platform_device_unregister(bus->drv_cc.watchdog); - } - --int bcma_bus_register(struct bcma_bus *bus) -+int __devinit bcma_bus_register(struct bcma_bus *bus) - { - int err; - struct bcma_device *core; - -+ mutex_lock(&bcma_buses_mutex); -+ bus->num = bcma_bus_next_num++; -+ mutex_unlock(&bcma_buses_mutex); -+ - /* Scan for devices (cores) */ - err = bcma_bus_scan(bus); - if (err) { -- pr_err("Failed to scan: %d\n", err); -- return -1; -+ bcma_err(bus, "Failed to scan: %d\n", err); -+ return err; - } - -+ /* Early init CC core */ -+ core = bcma_find_core(bus, bcma_cc_core_id(bus)); -+ if (core) { -+ bus->drv_cc.core = core; -+ bcma_core_chipcommon_early_init(&bus->drv_cc); -+ } -+ -+ /* Try to get SPROM */ -+ err = bcma_sprom_get(bus); -+ if (err == -ENOENT) { -+ bcma_err(bus, "No SPROM available\n"); -+ } else if (err) -+ bcma_err(bus, "Failed to get SPROM: %d\n", err); -+ - /* Init CC core */ -- core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); -+ core = bcma_find_core(bus, bcma_cc_core_id(bus)); - if (core) { - bus->drv_cc.core = core; - bcma_core_chipcommon_init(&bus->drv_cc); -@@ -159,30 +269,54 @@ int bcma_bus_register(struct bcma_bus *b - } - - /* Init PCIE core */ -- core = bcma_find_core(bus, BCMA_CORE_PCIE); -+ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 0); - if (core) { -- bus->drv_pci.core = core; -- bcma_core_pci_init(&bus->drv_pci); -+ bus->drv_pci[0].core = core; -+ bcma_core_pci_init(&bus->drv_pci[0]); - } - -- /* Try to get SPROM */ -- err = bcma_sprom_get(bus); -- if (err == -ENOENT) { -- pr_err("No SPROM available\n"); -- } else if (err) -- pr_err("Failed to get SPROM: %d\n", err); -+ /* Init PCIE core */ -+ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 1); -+ if (core) { -+ bus->drv_pci[1].core = core; -+ bcma_core_pci_init(&bus->drv_pci[1]); -+ } -+ -+ /* Init GBIT MAC COMMON core */ -+ core = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON); -+ if (core) { -+ bus->drv_gmac_cmn.core = core; -+ bcma_core_gmac_cmn_init(&bus->drv_gmac_cmn); -+ } - - /* Register found cores */ - bcma_register_cores(bus); - -- pr_info("Bus registered\n"); -+ bcma_info(bus, "Bus registered\n"); - - return 0; - } - - void bcma_bus_unregister(struct bcma_bus *bus) - { -+ struct bcma_device *cores[3]; -+ int err; -+ -+ err = bcma_gpio_unregister(&bus->drv_cc); -+ if (err == -EBUSY) -+ bcma_err(bus, "Some GPIOs are still in use.\n"); -+ else if (err) -+ bcma_err(bus, "Can not unregister GPIO driver: %i\n", err); -+ -+ cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K); -+ cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE); -+ cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON); -+ - bcma_unregister_cores(bus); -+ -+ kfree(cores[2]); -+ kfree(cores[1]); -+ kfree(cores[0]); - } - - int __init bcma_bus_early_register(struct bcma_bus *bus, -@@ -196,14 +330,14 @@ int __init bcma_bus_early_register(struc - bcma_init_bus(bus); - - match.manuf = BCMA_MANUF_BCM; -- match.id = BCMA_CORE_CHIPCOMMON; -+ match.id = bcma_cc_core_id(bus); - match.class = BCMA_CL_SIM; - match.rev = BCMA_ANY_REV; - - /* Scan for chip common core */ - err = bcma_bus_scan_early(bus, &match, core_cc); - if (err) { -- pr_err("Failed to scan for common core: %d\n", err); -+ bcma_err(bus, "Failed to scan for common core: %d\n", err); - return -1; - } - -@@ -215,25 +349,25 @@ int __init bcma_bus_early_register(struc - /* Scan for mips core */ - err = bcma_bus_scan_early(bus, &match, core_mips); - if (err) { -- pr_err("Failed to scan for mips core: %d\n", err); -+ bcma_err(bus, "Failed to scan for mips core: %d\n", err); - return -1; - } - -- /* Init CC core */ -- core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); -+ /* Early init CC core */ -+ core = bcma_find_core(bus, bcma_cc_core_id(bus)); - if (core) { - bus->drv_cc.core = core; -- bcma_core_chipcommon_init(&bus->drv_cc); -+ bcma_core_chipcommon_early_init(&bus->drv_cc); - } - -- /* Init MIPS core */ -+ /* Early init MIPS core */ - core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); - if (core) { - bus->drv_mips.core = core; -- bcma_core_mips_init(&bus->drv_mips); -+ bcma_core_mips_early_init(&bus->drv_mips); - } - -- pr_info("Early bus registered\n"); -+ bcma_info(bus, "Early bus registered\n"); - - return 0; - } -@@ -259,8 +393,7 @@ int bcma_bus_resume(struct bcma_bus *bus - struct bcma_device *core; - - /* Init CC core */ -- core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); -- if (core) { -+ if (bus->drv_cc.core) { - bus->drv_cc.setup_done = false; - bcma_core_chipcommon_init(&bus->drv_cc); - } ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -19,15 +19,39 @@ struct bcma_device_id_name { - u16 id; - const char *name; - }; --struct bcma_device_id_name bcma_device_names[] = { -+ -+static const struct bcma_device_id_name bcma_arm_device_names[] = { -+ { BCMA_CORE_4706_MAC_GBIT_COMMON, "BCM4706 GBit MAC Common" }, -+ { BCMA_CORE_ARM_1176, "ARM 1176" }, -+ { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, -+ { BCMA_CORE_ARM_CM3, "ARM CM3" }, -+}; -+ -+static const struct bcma_device_id_name bcma_bcm_device_names[] = { - { BCMA_CORE_OOB_ROUTER, "OOB Router" }, -+ { BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" }, -+ { BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" }, -+ { BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" }, -+ { BCMA_CORE_PCIEG2, "PCIe Gen 2" }, -+ { BCMA_CORE_DMA, "DMA" }, -+ { BCMA_CORE_SDIO3, "SDIO3" }, -+ { BCMA_CORE_USB20, "USB 2.0" }, -+ { BCMA_CORE_USB30, "USB 3.0" }, -+ { BCMA_CORE_A9JTAG, "ARM Cortex A9 JTAG" }, -+ { BCMA_CORE_DDR23, "Denali DDR2/DDR3 memory controller" }, -+ { BCMA_CORE_ROM, "ROM" }, -+ { BCMA_CORE_NAND, "NAND flash controller" }, -+ { BCMA_CORE_QSPI, "SPI flash controller" }, -+ { BCMA_CORE_CHIPCOMMON_B, "Chipcommon B" }, -+ { BCMA_CORE_ARMCA9, "ARM Cortex A9 core (ihost)" }, -+ { BCMA_CORE_AMEMC, "AMEMC (DDR)" }, -+ { BCMA_CORE_ALTA, "ALTA (I2S)" }, - { BCMA_CORE_INVALID, "Invalid" }, - { BCMA_CORE_CHIPCOMMON, "ChipCommon" }, - { BCMA_CORE_ILINE20, "ILine 20" }, - { BCMA_CORE_SRAM, "SRAM" }, - { BCMA_CORE_SDRAM, "SDRAM" }, - { BCMA_CORE_PCI, "PCI" }, -- { BCMA_CORE_MIPS, "MIPS" }, - { BCMA_CORE_ETHERNET, "Fast Ethernet" }, - { BCMA_CORE_V90, "V90" }, - { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" }, -@@ -44,7 +68,6 @@ struct bcma_device_id_name bcma_device_n - { BCMA_CORE_PHY_A, "PHY A" }, - { BCMA_CORE_PHY_B, "PHY B" }, - { BCMA_CORE_PHY_G, "PHY G" }, -- { BCMA_CORE_MIPS_3302, "MIPS 3302" }, - { BCMA_CORE_USB11_HOST, "USB 1.1 Host" }, - { BCMA_CORE_USB11_DEV, "USB 1.1 Device" }, - { BCMA_CORE_USB20_HOST, "USB 2.0 Host" }, -@@ -58,15 +81,11 @@ struct bcma_device_id_name bcma_device_n - { BCMA_CORE_PHY_N, "PHY N" }, - { BCMA_CORE_SRAM_CTL, "SRAM Controller" }, - { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" }, -- { BCMA_CORE_ARM_1176, "ARM 1176" }, -- { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, - { BCMA_CORE_PHY_LP, "PHY LP" }, - { BCMA_CORE_PMU, "PMU" }, - { BCMA_CORE_PHY_SSN, "PHY SSN" }, - { BCMA_CORE_SDIO_DEV, "SDIO Device" }, -- { BCMA_CORE_ARM_CM3, "ARM CM3" }, - { BCMA_CORE_PHY_HT, "PHY HT" }, -- { BCMA_CORE_MIPS_74K, "MIPS 74K" }, - { BCMA_CORE_MAC_GBIT, "GBit MAC" }, - { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" }, - { BCMA_CORE_PCIE_RC, "PCIe Root Complex" }, -@@ -77,18 +96,45 @@ struct bcma_device_id_name bcma_device_n - { BCMA_CORE_I2S, "I2S" }, - { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" }, - { BCMA_CORE_SHIM, "SHIM" }, -+ { BCMA_CORE_PCIE2, "PCIe Gen2" }, -+ { BCMA_CORE_ARM_CR4, "ARM CR4" }, - { BCMA_CORE_DEFAULT, "Default" }, - }; --const char *bcma_device_name(struct bcma_device_id *id) -+ -+static const struct bcma_device_id_name bcma_mips_device_names[] = { -+ { BCMA_CORE_MIPS, "MIPS" }, -+ { BCMA_CORE_MIPS_3302, "MIPS 3302" }, -+ { BCMA_CORE_MIPS_74K, "MIPS 74K" }, -+}; -+ -+static const char *bcma_device_name(const struct bcma_device_id *id) - { -- int i; -+ const struct bcma_device_id_name *names; -+ int size, i; - -- if (id->manuf == BCMA_MANUF_BCM) { -- for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) { -- if (bcma_device_names[i].id == id->id) -- return bcma_device_names[i].name; -- } -+ /* search manufacturer specific names */ -+ switch (id->manuf) { -+ case BCMA_MANUF_ARM: -+ names = bcma_arm_device_names; -+ size = ARRAY_SIZE(bcma_arm_device_names); -+ break; -+ case BCMA_MANUF_BCM: -+ names = bcma_bcm_device_names; -+ size = ARRAY_SIZE(bcma_bcm_device_names); -+ break; -+ case BCMA_MANUF_MIPS: -+ names = bcma_mips_device_names; -+ size = ARRAY_SIZE(bcma_mips_device_names); -+ break; -+ default: -+ return "UNKNOWN"; -+ } -+ -+ for (i = 0; i < size; i++) { -+ if (names[i].id == id->id) -+ return names[i].name; - } -+ - return "UNKNOWN"; - } - -@@ -105,19 +151,19 @@ static void bcma_scan_switch_core(struct - addr); - } - --static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr) -+static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr) - { - u32 ent = readl(*eromptr); - (*eromptr)++; - return ent; - } - --static void bcma_erom_push_ent(u32 **eromptr) -+static void bcma_erom_push_ent(u32 __iomem **eromptr) - { - (*eromptr)--; - } - --static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr) -+static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 __iomem **eromptr) - { - u32 ent = bcma_erom_get_ent(bus, eromptr); - if (!(ent & SCAN_ER_VALID)) -@@ -127,14 +173,14 @@ static s32 bcma_erom_get_ci(struct bcma_ - return ent; - } - --static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr) -+static bool bcma_erom_is_end(struct bcma_bus *bus, u32 __iomem **eromptr) - { - u32 ent = bcma_erom_get_ent(bus, eromptr); - bcma_erom_push_ent(eromptr); - return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID)); - } - --static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr) -+static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 __iomem **eromptr) - { - u32 ent = bcma_erom_get_ent(bus, eromptr); - bcma_erom_push_ent(eromptr); -@@ -143,7 +189,7 @@ static bool bcma_erom_is_bridge(struct b - ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE)); - } - --static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr) -+static void bcma_erom_skip_component(struct bcma_bus *bus, u32 __iomem **eromptr) - { - u32 ent; - while (1) { -@@ -157,7 +203,7 @@ static void bcma_erom_skip_component(str - bcma_erom_push_ent(eromptr); - } - --static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr) -+static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 __iomem **eromptr) - { - u32 ent = bcma_erom_get_ent(bus, eromptr); - if (!(ent & SCAN_ER_VALID)) -@@ -167,7 +213,7 @@ static s32 bcma_erom_get_mst_port(struct - return ent; - } - --static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr, -+static u32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, - u32 type, u8 port) - { - u32 addrl, addrh, sizel, sizeh = 0; -@@ -179,7 +225,7 @@ static s32 bcma_erom_get_addr_desc(struc - ((ent & SCAN_ADDR_TYPE) != type) || - (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) { - bcma_erom_push_ent(eromptr); -- return -EINVAL; -+ return (u32)-EINVAL; - } - - addrl = ent & SCAN_ADDR_ADDR; -@@ -212,11 +258,24 @@ static struct bcma_device *bcma_find_cor - return NULL; - } - -+static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) -+{ -+ struct bcma_device *core; -+ -+ list_for_each_entry_reverse(core, &bus->cores, list) { -+ if (core->id.id == coreid) -+ return core; -+ } -+ return NULL; -+} -+ -+#define IS_ERR_VALUE_U32(x) ((x) >= (u32)-MAX_ERRNO) -+ - static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, - struct bcma_device_id *match, int core_num, - struct bcma_device *core) - { -- s32 tmp; -+ u32 tmp; - u8 i, j; - s32 cia, cib; - u8 ports[2], wrappers[2]; -@@ -252,11 +311,15 @@ static int bcma_get_next_core(struct bcm - - /* check if component is a core at all */ - if (wrappers[0] + wrappers[1] == 0) { -- /* we could save addrl of the router -- if (cid == BCMA_CORE_OOB_ROUTER) -- */ -- bcma_erom_skip_component(bus, eromptr); -- return -ENXIO; -+ /* Some specific cores don't need wrappers */ -+ switch (core->id.id) { -+ case BCMA_CORE_4706_MAC_GBIT_COMMON: -+ /* Not used yet: case BCMA_CORE_OOB_ROUTER: */ -+ break; -+ default: -+ bcma_erom_skip_component(bus, eromptr); -+ return -ENXIO; -+ } - } - - if (bcma_erom_is_bridge(bus, eromptr)) { -@@ -286,19 +349,36 @@ static int bcma_get_next_core(struct bcm - return -EILSEQ; - } - -+ /* First Slave Address Descriptor should be port 0: -+ * the main register space for the core -+ */ -+ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0); -+ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) { -+ /* Try again to see if it is a bridge */ -+ tmp = bcma_erom_get_addr_desc(bus, eromptr, -+ SCAN_ADDR_TYPE_BRIDGE, 0); -+ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) { -+ return -EILSEQ; -+ } else { -+ bcma_info(bus, "Bridge found\n"); -+ return -ENXIO; -+ } -+ } -+ core->addr = tmp; -+ - /* get & parse slave ports */ - for (i = 0; i < ports[1]; i++) { - for (j = 0; ; j++) { - tmp = bcma_erom_get_addr_desc(bus, eromptr, - SCAN_ADDR_TYPE_SLAVE, i); -- if (tmp < 0) { -+ if (IS_ERR_VALUE_U32(tmp)) { - /* no more entries for port _i_ */ - /* pr_debug("erom: slave port %d " - * "has %d descriptors\n", i, j); */ - break; - } else { - if (i == 0 && j == 0) -- core->addr = tmp; -+ core->addr1 = tmp; - } - } - } -@@ -308,7 +388,7 @@ static int bcma_get_next_core(struct bcm - for (j = 0; ; j++) { - tmp = bcma_erom_get_addr_desc(bus, eromptr, - SCAN_ADDR_TYPE_MWRAP, i); -- if (tmp < 0) { -+ if (IS_ERR_VALUE_U32(tmp)) { - /* no more entries for port _i_ */ - /* pr_debug("erom: master wrapper %d " - * "has %d descriptors\n", i, j); */ -@@ -326,7 +406,7 @@ static int bcma_get_next_core(struct bcm - for (j = 0; ; j++) { - tmp = bcma_erom_get_addr_desc(bus, eromptr, - SCAN_ADDR_TYPE_SWRAP, i + hack); -- if (tmp < 0) { -+ if (IS_ERR_VALUE_U32(tmp)) { - /* no more entries for port _i_ */ - /* pr_debug("erom: master wrapper %d " - * has %d descriptors\n", i, j); */ -@@ -353,6 +433,7 @@ static int bcma_get_next_core(struct bcm - void bcma_init_bus(struct bcma_bus *bus) - { - s32 tmp; -+ struct bcma_chipinfo *chipinfo = &(bus->chipinfo); - - if (bus->init_done) - return; -@@ -363,9 +444,12 @@ void bcma_init_bus(struct bcma_bus *bus) - bcma_scan_switch_core(bus, BCMA_ADDR_BASE); - - tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); -- bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; -- bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; -- bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; -+ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; -+ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; -+ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; -+ bcma_info(bus, "Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", -+ chipinfo->id, chipinfo->rev, chipinfo->pkg); -+ - bus->init_done = true; - } - -@@ -392,9 +476,12 @@ int bcma_bus_scan(struct bcma_bus *bus) - bcma_scan_switch_core(bus, erombase); - - while (eromptr < eromend) { -+ struct bcma_device *other_core; - struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); -- if (!core) -- return -ENOMEM; -+ if (!core) { -+ err = -ENOMEM; -+ goto out; -+ } - INIT_LIST_HEAD(&core->list); - core->bus = bus; - -@@ -409,25 +496,28 @@ int bcma_bus_scan(struct bcma_bus *bus) - } else if (err == -ESPIPE) { - break; - } -- return err; -+ goto out; - } - - core->core_index = core_num++; - bus->nr_cores++; -+ other_core = bcma_find_core_reverse(bus, core->id.id); -+ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; - -- pr_info("Core %d found: %s " -- "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -- core->core_index, bcma_device_name(&core->id), -- core->id.manuf, core->id.id, core->id.rev, -- core->id.class); -+ bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -+ core->core_index, bcma_device_name(&core->id), -+ core->id.manuf, core->id.id, core->id.rev, -+ core->id.class); - -- list_add(&core->list, &bus->cores); -+ list_add_tail(&core->list, &bus->cores); - } - -+ err = 0; -+out: - if (bus->hosttype == BCMA_HOSTTYPE_SOC) - iounmap(eromptr); - -- return 0; -+ return err; - } - - int __init bcma_bus_scan_early(struct bcma_bus *bus, -@@ -467,21 +557,21 @@ int __init bcma_bus_scan_early(struct bc - else if (err == -ESPIPE) - break; - else if (err < 0) -- return err; -+ goto out; - - core->core_index = core_num++; - bus->nr_cores++; -- pr_info("Core %d found: %s " -- "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -- core->core_index, bcma_device_name(&core->id), -- core->id.manuf, core->id.id, core->id.rev, -- core->id.class); -+ bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -+ core->core_index, bcma_device_name(&core->id), -+ core->id.manuf, core->id.id, core->id.rev, -+ core->id.class); - -- list_add(&core->list, &bus->cores); -+ list_add_tail(&core->list, &bus->cores); - err = 0; - break; - } - -+out: - if (bus->hosttype == BCMA_HOSTTYPE_SOC) - iounmap(eromptr); - ---- a/drivers/bcma/scan.h -+++ b/drivers/bcma/scan.h -@@ -27,7 +27,7 @@ - #define SCAN_CIB_NMW 0x0007C000 - #define SCAN_CIB_NMW_SHIFT 14 - #define SCAN_CIB_NSW 0x00F80000 --#define SCAN_CIB_NSW_SHIFT 17 -+#define SCAN_CIB_NSW_SHIFT 19 - #define SCAN_CIB_REV 0xFF000000 - #define SCAN_CIB_REV_SHIFT 24 - ---- a/drivers/bcma/sprom.c -+++ b/drivers/bcma/sprom.c -@@ -2,6 +2,8 @@ - * Broadcom specific AMBA - * SPROM reading - * -+ * Copyright 2011, 2012, Hauke Mehrtens -+ * - * Licensed under the GNU/GPL. See COPYING for details. - */ - -@@ -14,18 +16,68 @@ - #include - #include - --#define SPOFF(offset) ((offset) / sizeof(u16)) -+static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); -+ -+/** -+ * bcma_arch_register_fallback_sprom - Registers a method providing a -+ * fallback SPROM if no SPROM is found. -+ * -+ * @sprom_callback: The callback function. -+ * -+ * With this function the architecture implementation may register a -+ * callback handler which fills the SPROM data structure. The fallback is -+ * used for PCI based BCMA devices, where no valid SPROM can be found -+ * in the shadow registers and to provide the SPROM for SoCs where BCMA is -+ * to controll the system bus. -+ * -+ * This function is useful for weird architectures that have a half-assed -+ * BCMA device hardwired to their PCI bus. -+ * -+ * This function is available for architecture code, only. So it is not -+ * exported. -+ */ -+int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, -+ struct ssb_sprom *out)) -+{ -+ if (get_fallback_sprom) -+ return -EEXIST; -+ get_fallback_sprom = sprom_callback; -+ -+ return 0; -+} -+ -+static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, -+ struct ssb_sprom *out) -+{ -+ int err; -+ -+ if (!get_fallback_sprom) { -+ err = -ENOENT; -+ goto fail; -+ } -+ -+ err = get_fallback_sprom(bus, out); -+ if (err) -+ goto fail; -+ -+ bcma_debug(bus, "Using SPROM revision %d provided by platform.\n", -+ bus->sprom.revision); -+ return 0; -+fail: -+ bcma_warn(bus, "Using fallback SPROM failed (err %d)\n", err); -+ return err; -+} - - /************************************************** - * R/W ops. - **************************************************/ - --static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom) -+static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom, -+ size_t words) - { - int i; -- for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++) -- sprom[i] = bcma_read16(bus->drv_cc.core, -- offset + (i * 2)); -+ for (i = 0; i < words; i++) -+ sprom[i] = bcma_read16(bus->drv_cc.core, offset + (i * 2)); - } - - /************************************************** -@@ -72,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 da - return t[crc ^ data]; - } - --static u8 bcma_sprom_crc(const u16 *sprom) -+static u8 bcma_sprom_crc(const u16 *sprom, size_t words) - { - int word; - u8 crc = 0xFF; - -- for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) { -+ for (word = 0; word < words - 1; word++) { - crc = bcma_crc8(crc, sprom[word] & 0x00FF); - crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8); - } -- crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF); -+ crc = bcma_crc8(crc, sprom[words - 1] & 0x00FF); - crc ^= 0xFF; - - return crc; - } - --static int bcma_sprom_check_crc(const u16 *sprom) -+static int bcma_sprom_check_crc(const u16 *sprom, size_t words) - { - u8 crc; - u8 expected_crc; - u16 tmp; - -- crc = bcma_sprom_crc(sprom); -- tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC; -+ crc = bcma_sprom_crc(sprom, words); -+ tmp = sprom[words - 1] & SSB_SPROM_REVISION_CRC; - expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT; - if (crc != expected_crc) - return -EPROTO; -@@ -102,21 +154,25 @@ static int bcma_sprom_check_crc(const u1 - return 0; - } - --static int bcma_sprom_valid(const u16 *sprom) -+static int bcma_sprom_valid(struct bcma_bus *bus, const u16 *sprom, -+ size_t words) - { - u16 revision; - int err; - -- err = bcma_sprom_check_crc(sprom); -+ err = bcma_sprom_check_crc(sprom, words); - if (err) - return err; - -- revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV; -- if (revision != 8 && revision != 9) { -+ revision = sprom[words - 1] & SSB_SPROM_REVISION_REV; -+ if (revision != 8 && revision != 9 && revision != 10) { - pr_err("Unsupported SPROM revision: %d\n", revision); - return -ENOENT; - } - -+ bus->sprom.revision = revision; -+ bcma_debug(bus, "Found SPROM revision %d\n", revision); -+ - return 0; - } - -@@ -124,124 +180,439 @@ static int bcma_sprom_valid(const u16 *s - * SPROM extraction. - **************************************************/ - -+#define SPOFF(offset) ((offset) / sizeof(u16)) -+ -+#define SPEX(_field, _offset, _mask, _shift) \ -+ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) -+ -+#define SPEX32(_field, _offset, _mask, _shift) \ -+ bus->sprom._field = ((((u32)sprom[SPOFF((_offset)+2)] << 16 | \ -+ sprom[SPOFF(_offset)]) & (_mask)) >> (_shift)) -+ -+#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \ -+ do { \ -+ SPEX(_field[0], _offset + 0, _mask, _shift); \ -+ SPEX(_field[1], _offset + 2, _mask, _shift); \ -+ SPEX(_field[2], _offset + 4, _mask, _shift); \ -+ SPEX(_field[3], _offset + 6, _mask, _shift); \ -+ SPEX(_field[4], _offset + 8, _mask, _shift); \ -+ SPEX(_field[5], _offset + 10, _mask, _shift); \ -+ SPEX(_field[6], _offset + 12, _mask, _shift); \ -+ SPEX(_field[7], _offset + 14, _mask, _shift); \ -+ } while (0) -+ - static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) - { -- u16 v; -+ u16 v, o; - int i; -- -- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & -- SSB_SPROM_REVISION_REV; -+ u16 pwr_info_offset[] = { -+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, -+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 -+ }; -+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != -+ ARRAY_SIZE(bus->sprom.core_pwr_info)); - - for (i = 0; i < 3; i++) { - v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; - *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); - } - -- bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; -+ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); -+ SPEX(board_type, SSB_SPROM1_SPID, ~0, 0); -+ -+ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, -+ SSB_SPROM4_TXPID2G0_SHIFT); -+ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, -+ SSB_SPROM4_TXPID2G1_SHIFT); -+ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, -+ SSB_SPROM4_TXPID2G2_SHIFT); -+ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, -+ SSB_SPROM4_TXPID2G3_SHIFT); -+ -+ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, -+ SSB_SPROM4_TXPID5GL0_SHIFT); -+ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, -+ SSB_SPROM4_TXPID5GL1_SHIFT); -+ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, -+ SSB_SPROM4_TXPID5GL2_SHIFT); -+ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, -+ SSB_SPROM4_TXPID5GL3_SHIFT); -+ -+ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, -+ SSB_SPROM4_TXPID5G0_SHIFT); -+ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, -+ SSB_SPROM4_TXPID5G1_SHIFT); -+ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, -+ SSB_SPROM4_TXPID5G2_SHIFT); -+ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, -+ SSB_SPROM4_TXPID5G3_SHIFT); -+ -+ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, -+ SSB_SPROM4_TXPID5GH0_SHIFT); -+ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, -+ SSB_SPROM4_TXPID5GH1_SHIFT); -+ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, -+ SSB_SPROM4_TXPID5GH2_SHIFT); -+ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, -+ SSB_SPROM4_TXPID5GH3_SHIFT); -+ -+ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); -+ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); -+ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); -+ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); -+ -+ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8); -+ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0); -+ -+ /* Extract cores power info info */ -+ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { -+ o = pwr_info_offset[i]; -+ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, -+ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); -+ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, -+ SSB_SPROM8_2G_MAXP, 0); -+ -+ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); -+ -+ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, -+ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); -+ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, -+ SSB_SPROM8_5G_MAXP, 0); -+ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, -+ SSB_SPROM8_5GH_MAXP, 0); -+ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, -+ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); -+ -+ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); -+ } -+ -+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, -+ SSB_SROM8_FEM_TSSIPOS_SHIFT); -+ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, -+ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); -+ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, -+ SSB_SROM8_FEM_PDET_RANGE_SHIFT); -+ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, -+ SSB_SROM8_FEM_TR_ISO_SHIFT); -+ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, -+ SSB_SROM8_FEM_ANTSWLUT_SHIFT); -+ -+ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, -+ SSB_SROM8_FEM_TSSIPOS_SHIFT); -+ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, -+ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); -+ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, -+ SSB_SROM8_FEM_PDET_RANGE_SHIFT); -+ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, -+ SSB_SROM8_FEM_TR_ISO_SHIFT); -+ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, -+ SSB_SROM8_FEM_ANTSWLUT_SHIFT); -+ -+ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, -+ SSB_SPROM8_ANTAVAIL_A_SHIFT); -+ SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, -+ SSB_SPROM8_ANTAVAIL_BG_SHIFT); -+ SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0); -+ SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG, -+ SSB_SPROM8_ITSSI_BG_SHIFT); -+ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); -+ SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, -+ SSB_SPROM8_ITSSI_A_SHIFT); -+ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0); -+ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK, -+ SSB_SPROM8_MAXP_AL_SHIFT); -+ SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0); -+ SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1, -+ SSB_SPROM8_GPIOA_P1_SHIFT); -+ SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0); -+ SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3, -+ SSB_SPROM8_GPIOB_P3_SHIFT); -+ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0); -+ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G, -+ SSB_SPROM8_TRI5G_SHIFT); -+ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0); -+ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH, -+ SSB_SPROM8_TRI5GH_SHIFT); -+ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, -+ SSB_SPROM8_RXPO2G_SHIFT); -+ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G, -+ SSB_SPROM8_RXPO5G_SHIFT); -+ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0); -+ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G, -+ SSB_SPROM8_RSSISMC2G_SHIFT); -+ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G, -+ SSB_SPROM8_RSSISAV2G_SHIFT); -+ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G, -+ SSB_SPROM8_BXA2G_SHIFT); -+ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0); -+ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G, -+ SSB_SPROM8_RSSISMC5G_SHIFT); -+ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G, -+ SSB_SPROM8_RSSISAV5G_SHIFT); -+ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G, -+ SSB_SPROM8_BXA5G_SHIFT); -+ -+ SPEX(pa0b0, SSB_SPROM8_PA0B0, ~0, 0); -+ SPEX(pa0b1, SSB_SPROM8_PA0B1, ~0, 0); -+ SPEX(pa0b2, SSB_SPROM8_PA0B2, ~0, 0); -+ SPEX(pa1b0, SSB_SPROM8_PA1B0, ~0, 0); -+ SPEX(pa1b1, SSB_SPROM8_PA1B1, ~0, 0); -+ SPEX(pa1b2, SSB_SPROM8_PA1B2, ~0, 0); -+ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, ~0, 0); -+ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, ~0, 0); -+ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, ~0, 0); -+ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, ~0, 0); -+ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, ~0, 0); -+ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, ~0, 0); -+ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, ~0, 0); -+ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, ~0, 0); -+ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, ~0, 0); -+ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, ~0, 0); -+ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, ~0, 0); -+ -+ /* Extract the antenna gain values. */ -+ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, -+ SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); -+ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, -+ SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); -+ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, -+ SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); -+ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, -+ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); -+ -+ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON, -+ SSB_SPROM8_LEDDC_ON_SHIFT); -+ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF, -+ SSB_SPROM8_LEDDC_OFF_SHIFT); -+ -+ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN, -+ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT); -+ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN, -+ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT); -+ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH, -+ SSB_SPROM8_TXRXC_SWITCH_SHIFT); -+ -+ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0); -+ -+ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0); -+ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0); -+ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0); -+ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0); -+ -+ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP, -+ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT); -+ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER, -+ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT); -+ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX, -+ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE, -+ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT); -+ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX, -+ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT); -+ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX, -+ SSB_SPROM8_OPT_CORRX_TEMP_OPTION, -+ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT); -+ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP, -+ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR, -+ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT); -+ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP, -+ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP, -+ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT); -+ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL, -+ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT); -+ -+ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0); -+ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0); -+ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0); -+ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0); -+ -+ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH, -+ SSB_SPROM8_THERMAL_TRESH_SHIFT); -+ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET, -+ SSB_SPROM8_THERMAL_OFFSET_SHIFT); -+ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA, -+ SSB_SPROM8_TEMPDELTA_PHYCAL, -+ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT); -+ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD, -+ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT); -+ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA, -+ SSB_SPROM8_TEMPDELTA_HYSTERESIS, -+ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT); -+} -+ -+/* -+ * Indicates the presence of external SPROM. -+ */ -+static bool bcma_sprom_ext_available(struct bcma_bus *bus) -+{ -+ u32 chip_status; -+ u32 srom_control; -+ u32 present_mask; -+ -+ if (bus->drv_cc.core->id.rev >= 31) { -+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -+ return false; -+ -+ srom_control = bcma_read32(bus->drv_cc.core, -+ BCMA_CC_SROM_CONTROL); -+ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; -+ } -+ -+ /* older chipcommon revisions use chip status register */ -+ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); -+ switch (bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM4313: -+ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; -+ break; -+ -+ case BCMA_CHIP_ID_BCM4331: -+ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; -+ break; - -- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; -- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; -- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; -- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; -- -- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; -- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; -- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; -- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; -- -- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; -- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; -- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; -- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; -- -- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; -- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; -- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; -- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; -- -- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; -- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; -- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; -- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; -- -- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; -- -- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; -- -- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; -+ default: -+ return true; -+ } -+ -+ return chip_status & present_mask; -+} -+ -+/* -+ * Indicates that on-chip OTP memory is present and enabled. -+ */ -+static bool bcma_sprom_onchip_available(struct bcma_bus *bus) -+{ -+ u32 chip_status; -+ u32 otpsize = 0; -+ bool present; -+ -+ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); -+ switch (bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM4313: -+ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; -+ break; -+ -+ case BCMA_CHIP_ID_BCM4331: -+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; -+ break; -+ case BCMA_CHIP_ID_BCM43142: -+ case BCMA_CHIP_ID_BCM43224: -+ case BCMA_CHIP_ID_BCM43225: -+ /* for these chips OTP is always available */ -+ present = true; -+ break; -+ case BCMA_CHIP_ID_BCM43227: -+ case BCMA_CHIP_ID_BCM43228: -+ case BCMA_CHIP_ID_BCM43428: -+ present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT; -+ break; -+ default: -+ present = false; -+ break; -+ } -+ -+ if (present) { -+ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; -+ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; -+ } -+ -+ return otpsize != 0; -+} -+ -+/* -+ * Verify OTP is filled and determine the byte -+ * offset where SPROM data is located. -+ * -+ * On error, returns 0; byte offset otherwise. -+ */ -+static int bcma_sprom_onchip_offset(struct bcma_bus *bus) -+{ -+ struct bcma_device *cc = bus->drv_cc.core; -+ u32 offset; -+ -+ /* verify OTP status */ -+ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) -+ return 0; -+ -+ /* obtain bit offset from otplayout register */ -+ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); -+ return BCMA_CC_SPROM + (offset >> 3); - } - - int bcma_sprom_get(struct bcma_bus *bus) - { -- u16 offset; -+ u16 offset = BCMA_CC_SPROM; - u16 *sprom; -- int err = 0; -+ size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4, -+ SSB_SPROMSIZE_WORDS_R10, }; -+ int i, err = 0; - - if (!bus->drv_cc.core) - return -EOPNOTSUPP; - -- if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -- return -ENOENT; -+ if (!bcma_sprom_ext_available(bus)) { -+ bool sprom_onchip; - -- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), -- GFP_KERNEL); -- if (!sprom) -- return -ENOMEM; -+ /* -+ * External SPROM takes precedence so check -+ * on-chip OTP only when no external SPROM -+ * is present. -+ */ -+ sprom_onchip = bcma_sprom_onchip_available(bus); -+ if (sprom_onchip) { -+ /* determine offset */ -+ offset = bcma_sprom_onchip_offset(bus); -+ } -+ if (!offset || !sprom_onchip) { -+ /* -+ * Maybe there is no SPROM on the device? -+ * Now we ask the arch code if there is some sprom -+ * available for this device in some other storage. -+ */ -+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); -+ return err; -+ } -+ } - -- if (bus->chipinfo.id == 0x4331) -+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 || -+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431) - bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); - -- /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). -- * According to brcm80211 this applies to cards with PCIe rev >= 6 -- * TODO: understand this condition and use it */ -- offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : -- BCMA_CC_SPROM_PCIE6; -- bcma_sprom_read(bus, offset, sprom); -+ bcma_debug(bus, "SPROM offset 0x%x\n", offset); -+ for (i = 0; i < ARRAY_SIZE(sprom_sizes); i++) { -+ size_t words = sprom_sizes[i]; -+ -+ sprom = kcalloc(words, sizeof(u16), GFP_KERNEL); -+ if (!sprom) -+ return -ENOMEM; -+ -+ bcma_sprom_read(bus, offset, sprom, words); -+ err = bcma_sprom_valid(bus, sprom, words); -+ if (!err) -+ break; - -- if (bus->chipinfo.id == 0x4331) -- bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); -+ kfree(sprom); -+ } - -- err = bcma_sprom_valid(sprom); -- if (err) -- goto out; -+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 || -+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431) -+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); - -- bcma_sprom_extract_r8(bus, sprom); -+ if (err) { -+ bcma_warn(bus, "Invalid SPROM read from the PCIe card, trying to use fallback SPROM\n"); -+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); -+ } else { -+ bcma_sprom_extract_r8(bus, sprom); -+ kfree(sprom); -+ } - --out: -- kfree(sprom); - return err; - } ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -7,9 +7,10 @@ - #include - #include - #include -+#include - #include /* SPROM sharing */ - --#include "bcma_regs.h" -+#include - - struct bcma_device; - struct bcma_bus; -@@ -26,6 +27,11 @@ struct bcma_chipinfo { - u8 pkg; - }; - -+struct bcma_boardinfo { -+ u16 vendor; -+ u16 type; -+}; -+ - enum bcma_clkmode { - BCMA_CLKMODE_FAST, - BCMA_CLKMODE_DYNAMIC, -@@ -65,6 +71,25 @@ struct bcma_host_ops { - - /* Core-ID values. */ - #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ -+#define BCMA_CORE_4706_CHIPCOMMON 0x500 -+#define BCMA_CORE_PCIEG2 0x501 -+#define BCMA_CORE_DMA 0x502 -+#define BCMA_CORE_SDIO3 0x503 -+#define BCMA_CORE_USB20 0x504 -+#define BCMA_CORE_USB30 0x505 -+#define BCMA_CORE_A9JTAG 0x506 -+#define BCMA_CORE_DDR23 0x507 -+#define BCMA_CORE_ROM 0x508 -+#define BCMA_CORE_NAND 0x509 -+#define BCMA_CORE_QSPI 0x50A -+#define BCMA_CORE_CHIPCOMMON_B 0x50B -+#define BCMA_CORE_4706_SOC_RAM 0x50E -+#define BCMA_CORE_ARMCA9 0x510 -+#define BCMA_CORE_4706_MAC_GBIT 0x52D -+#define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ -+#define BCMA_CORE_ALTA 0x534 /* I2S core */ -+#define BCMA_CORE_4706_MAC_GBIT_COMMON 0x5DC -+#define BCMA_CORE_DDR23_PHY 0x5DD - #define BCMA_CORE_INVALID 0x700 - #define BCMA_CORE_CHIPCOMMON 0x800 - #define BCMA_CORE_ILINE20 0x801 -@@ -121,10 +146,112 @@ struct bcma_host_ops { - #define BCMA_CORE_I2S 0x834 - #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ - #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ -+#define BCMA_CORE_PHY_AC 0x83B -+#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */ -+#define BCMA_CORE_USB30_DEV 0x83D -+#define BCMA_CORE_ARM_CR4 0x83E - #define BCMA_CORE_DEFAULT 0xFFF - - #define BCMA_MAX_NR_CORES 16 - -+/* Chip IDs of PCIe devices */ -+#define BCMA_CHIP_ID_BCM4313 0x4313 -+#define BCMA_CHIP_ID_BCM43142 43142 -+#define BCMA_CHIP_ID_BCM43131 43131 -+#define BCMA_CHIP_ID_BCM43217 43217 -+#define BCMA_CHIP_ID_BCM43222 43222 -+#define BCMA_CHIP_ID_BCM43224 43224 -+#define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 -+#define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa -+#define BCMA_CHIP_ID_BCM43225 43225 -+#define BCMA_CHIP_ID_BCM43227 43227 -+#define BCMA_CHIP_ID_BCM43228 43228 -+#define BCMA_CHIP_ID_BCM43421 43421 -+#define BCMA_CHIP_ID_BCM43428 43428 -+#define BCMA_CHIP_ID_BCM43431 43431 -+#define BCMA_CHIP_ID_BCM43460 43460 -+#define BCMA_CHIP_ID_BCM4331 0x4331 -+#define BCMA_CHIP_ID_BCM6362 0x6362 -+#define BCMA_CHIP_ID_BCM4360 0x4360 -+#define BCMA_CHIP_ID_BCM4352 0x4352 -+ -+/* Chip IDs of SoCs */ -+#define BCMA_CHIP_ID_BCM4706 0x5300 -+#define BCMA_PKG_ID_BCM4706L 1 -+#define BCMA_CHIP_ID_BCM4716 0x4716 -+#define BCMA_PKG_ID_BCM4716 8 -+#define BCMA_PKG_ID_BCM4717 9 -+#define BCMA_PKG_ID_BCM4718 10 -+#define BCMA_CHIP_ID_BCM47162 47162 -+#define BCMA_CHIP_ID_BCM4748 0x4748 -+#define BCMA_CHIP_ID_BCM4749 0x4749 -+#define BCMA_CHIP_ID_BCM5356 0x5356 -+#define BCMA_CHIP_ID_BCM5357 0x5357 -+#define BCMA_PKG_ID_BCM5358 9 -+#define BCMA_PKG_ID_BCM47186 10 -+#define BCMA_PKG_ID_BCM5357 11 -+#define BCMA_CHIP_ID_BCM53572 53572 -+#define BCMA_PKG_ID_BCM47188 9 -+#define BCMA_CHIP_ID_BCM4707 53010 -+#define BCMA_PKG_ID_BCM4707 1 -+#define BCMA_PKG_ID_BCM4708 2 -+#define BCMA_PKG_ID_BCM4709 0 -+#define BCMA_CHIP_ID_BCM53018 53018 -+ -+/* Board types (on PCI usually equals to the subsystem dev id) */ -+/* BCM4313 */ -+#define BCMA_BOARD_TYPE_BCM94313BU 0X050F -+#define BCMA_BOARD_TYPE_BCM94313HM 0X0510 -+#define BCMA_BOARD_TYPE_BCM94313EPA 0X0511 -+#define BCMA_BOARD_TYPE_BCM94313HMG 0X051C -+/* BCM4716 */ -+#define BCMA_BOARD_TYPE_BCM94716NR2 0X04CD -+/* BCM43224 */ -+#define BCMA_BOARD_TYPE_BCM943224X21 0X056E -+#define BCMA_BOARD_TYPE_BCM943224X21_FCC 0X00D1 -+#define BCMA_BOARD_TYPE_BCM943224X21B 0X00E9 -+#define BCMA_BOARD_TYPE_BCM943224M93 0X008B -+#define BCMA_BOARD_TYPE_BCM943224M93A 0X0090 -+#define BCMA_BOARD_TYPE_BCM943224X16 0X0093 -+#define BCMA_BOARD_TYPE_BCM94322X9 0X008D -+#define BCMA_BOARD_TYPE_BCM94322M35E 0X008E -+/* BCM43228 */ -+#define BCMA_BOARD_TYPE_BCM943228BU8 0X0540 -+#define BCMA_BOARD_TYPE_BCM943228BU9 0X0541 -+#define BCMA_BOARD_TYPE_BCM943228BU 0X0542 -+#define BCMA_BOARD_TYPE_BCM943227HM4L 0X0543 -+#define BCMA_BOARD_TYPE_BCM943227HMB 0X0544 -+#define BCMA_BOARD_TYPE_BCM943228HM4L 0X0545 -+#define BCMA_BOARD_TYPE_BCM943228SD 0X0573 -+/* BCM4331 */ -+#define BCMA_BOARD_TYPE_BCM94331X19 0X00D6 -+#define BCMA_BOARD_TYPE_BCM94331X28 0X00E4 -+#define BCMA_BOARD_TYPE_BCM94331X28B 0X010E -+#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX 0X00E4 -+#define BCMA_BOARD_TYPE_BCM94331X12_2G 0X00EC -+#define BCMA_BOARD_TYPE_BCM94331X12_5G 0X00ED -+#define BCMA_BOARD_TYPE_BCM94331X29B 0X00EF -+#define BCMA_BOARD_TYPE_BCM94331CSAX 0X00EF -+#define BCMA_BOARD_TYPE_BCM94331X19C 0X00F5 -+#define BCMA_BOARD_TYPE_BCM94331X33 0X00F4 -+#define BCMA_BOARD_TYPE_BCM94331BU 0X0523 -+#define BCMA_BOARD_TYPE_BCM94331S9BU 0X0524 -+#define BCMA_BOARD_TYPE_BCM94331MC 0X0525 -+#define BCMA_BOARD_TYPE_BCM94331MCI 0X0526 -+#define BCMA_BOARD_TYPE_BCM94331PCIEBT4 0X0527 -+#define BCMA_BOARD_TYPE_BCM94331HM 0X0574 -+#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL 0X059B -+#define BCMA_BOARD_TYPE_BCM94331MCH5 0X05A9 -+#define BCMA_BOARD_TYPE_BCM94331CS 0X05C6 -+#define BCMA_BOARD_TYPE_BCM94331CD 0X05DA -+/* BCM53572 */ -+#define BCMA_BOARD_TYPE_BCM953572BU 0X058D -+#define BCMA_BOARD_TYPE_BCM953572NR2 0X058E -+#define BCMA_BOARD_TYPE_BCM947188NR2 0X058F -+#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590 -+/* BCM43142 */ -+#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0 -+ - struct bcma_device { - struct bcma_bus *bus; - struct bcma_device_id id; -@@ -136,8 +263,10 @@ struct bcma_device { - bool dev_registered; - - u8 core_index; -+ u8 core_unit; - - u32 addr; -+ u32 addr1; - u32 wrap; - - void __iomem *io_addr; -@@ -175,6 +304,12 @@ int __bcma_driver_register(struct bcma_d - - extern void bcma_driver_unregister(struct bcma_driver *drv); - -+/* Set a fallback SPROM. -+ * See kdoc at the function definition for complete documentation. */ -+extern int bcma_arch_register_fallback_sprom( -+ int (*sprom_callback)(struct bcma_bus *bus, -+ struct ssb_sprom *out)); -+ - struct bcma_bus { - /* The MMIO area. */ - void __iomem *mmio; -@@ -191,14 +326,18 @@ struct bcma_bus { - - struct bcma_chipinfo chipinfo; - -+ struct bcma_boardinfo boardinfo; -+ - struct bcma_device *mapped_core; - struct list_head cores; - u8 nr_cores; - u8 init_done:1; -+ u8 num; - - struct bcma_drv_cc drv_cc; -- struct bcma_drv_pci drv_pci; -+ struct bcma_drv_pci drv_pci[2]; - struct bcma_drv_mips drv_mips; -+ struct bcma_drv_gmac_cmn drv_gmac_cmn; - - /* We decided to share SPROM struct with SSB as long as we do not need - * any hacks for BCMA. This simplifies drivers code. */ -@@ -282,6 +421,7 @@ static inline void bcma_maskset16(struct - bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); - } - -+extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); - extern bool bcma_core_is_enabled(struct bcma_device *core); - extern void bcma_core_disable(struct bcma_device *core, u32 flags); - extern int bcma_core_enable(struct bcma_device *core, u32 flags); -@@ -289,6 +429,7 @@ extern void bcma_core_set_clockmode(stru - enum bcma_clkmode clkmode); - extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, - bool on); -+extern u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset); - #define BCMA_DMA_TRANSLATION_MASK 0xC0000000 - #define BCMA_DMA_TRANSLATION_NONE 0x00000000 - #define BCMA_DMA_TRANSLATION_DMA32_CMT 0x40000000 /* Client Mode Translation for 32-bit DMA */ ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -1,6 +1,9 @@ - #ifndef LINUX_BCMA_DRIVER_CC_H_ - #define LINUX_BCMA_DRIVER_CC_H_ - -+#include -+#include -+ - /** ChipCommon core registers. **/ - #define BCMA_CC_ID 0x0000 - #define BCMA_CC_ID_ID 0x0000FFFF -@@ -24,7 +27,7 @@ - #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ - #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ - #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ --#define BCMA_CC_FLASHT_NFLASH 0x00000200 -+#define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */ - #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ - #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ - #define BCMA_PLLTYPE_NONE 0x00000000 -@@ -45,6 +48,7 @@ - #define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ - #define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ - #define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */ -+#define BCMA_CC_CAP_NFLASH 0x80000000 /* NAND flash present (rev >= 35 or BCM4706?) */ - #define BCMA_CC_CORECTL 0x0008 - #define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ - #define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ -@@ -56,6 +60,9 @@ - #define BCMA_CC_OTPS_HW_PROTECT 0x00000001 - #define BCMA_CC_OTPS_SW_PROTECT 0x00000002 - #define BCMA_CC_OTPS_CID_PROTECT 0x00000004 -+#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ -+#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 -+#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ - #define BCMA_CC_OTPC 0x0014 /* OTP control */ - #define BCMA_CC_OTPC_RECWAIT 0xFF000000 - #define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 -@@ -72,6 +79,8 @@ - #define BCMA_CC_OTPP_READ 0x40000000 - #define BCMA_CC_OTPP_START 0x80000000 - #define BCMA_CC_OTPP_BUSY 0x80000000 -+#define BCMA_CC_OTPL 0x001C /* OTP layout */ -+#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ - #define BCMA_CC_IRQSTAT 0x0020 - #define BCMA_CC_IRQMASK 0x0024 - #define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ -@@ -79,6 +88,23 @@ - #define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ - #define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ - #define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ -+#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 -+#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 -+#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 -+#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 -+#define BCMA_CC_CHIPST_43228_ILP_DIV_EN 0x00000001 -+#define BCMA_CC_CHIPST_43228_OTP_PRESENT 0x00000002 -+#define BCMA_CC_CHIPST_43228_SERDES_REFCLK_PADSEL 0x00000004 -+#define BCMA_CC_CHIPST_43228_SDIO_MODE 0x00000008 -+#define BCMA_CC_CHIPST_43228_SDIO_OTP_PRESENT 0x00000010 -+#define BCMA_CC_CHIPST_43228_SDIO_RESET 0x00000020 -+#define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */ -+#define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */ -+#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */ -+#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */ -+#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */ -+#define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */ -+#define BCMA_CC_CHIPST_4360_XTAL_40MZ 0x00000001 - #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ - #define BCMA_CC_JCMD_START 0x80000000 - #define BCMA_CC_JCMD_BUSY 0x80000000 -@@ -108,10 +134,58 @@ - #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ - #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ - #define BCMA_CC_FLASHCTL 0x0040 -+/* Start/busy bit in flashcontrol */ -+#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff -+#define BCMA_CC_FLASHCTL_ACTION 0x00000700 -+#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */ - #define BCMA_CC_FLASHCTL_START 0x80000000 - #define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START -+/* Flashcontrol action + opcodes for ST flashes */ -+#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */ -+#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */ -+#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */ -+#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */ -+#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */ -+#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */ -+#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */ -+#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */ -+#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */ -+#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */ -+#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */ -+#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */ -+/* Flashcontrol action + opcodes for Atmel flashes */ -+#define BCMA_CC_FLASHCTL_AT_READ 0x07e8 -+#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2 -+#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7 -+#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384 -+#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387 -+#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283 -+#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286 -+#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288 -+#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289 -+#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281 -+#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250 -+#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 -+#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 -+#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253 -+#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255 -+#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260 -+#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261 -+#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258 -+#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259 - #define BCMA_CC_FLASHADDR 0x0044 - #define BCMA_CC_FLASHDATA 0x0048 -+/* Status register bits for ST flashes */ -+#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */ -+#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */ -+#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */ -+#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2 -+#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */ -+/* Status register bits for Atmel flashes */ -+#define BCMA_CC_FLASHDATA_AT_READY 0x80 -+#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40 -+#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38 -+#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3 - #define BCMA_CC_BCAST_ADDR 0x0050 - #define BCMA_CC_BCAST_DATA 0x0054 - #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ -@@ -181,6 +255,45 @@ - #define BCMA_CC_FLASH_CFG 0x0128 - #define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ - #define BCMA_CC_FLASH_WAITCNT 0x012C -+#define BCMA_CC_SROM_CONTROL 0x0190 -+#define BCMA_CC_SROM_CONTROL_START 0x80000000 -+#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 -+#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 -+#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 -+#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 -+#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 -+#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 -+#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 -+#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 -+#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 -+#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 -+#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 -+#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 -+#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 -+#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 -+/* Block 0x140 - 0x190 registers are chipset specific */ -+#define BCMA_CC_4706_FLASHSCFG 0x18C /* Flash struct configuration */ -+#define BCMA_CC_4706_FLASHSCFG_MASK 0x000000ff -+#define BCMA_CC_4706_FLASHSCFG_SF1 0x00000001 /* 2nd serial flash present */ -+#define BCMA_CC_4706_FLASHSCFG_PF1 0x00000002 /* 2nd parallel flash present */ -+#define BCMA_CC_4706_FLASHSCFG_SF1_TYPE 0x00000004 /* 2nd serial flash type : 0 : ST, 1 : Atmel */ -+#define BCMA_CC_4706_FLASHSCFG_NF1 0x00000008 /* 2nd NAND flash present */ -+#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_MASK 0x000000f0 -+#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_4MB 0x00000010 /* 4MB */ -+#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_8MB 0x00000020 /* 8MB */ -+#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_16MB 0x00000030 /* 16MB */ -+#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_32MB 0x00000040 /* 32MB */ -+#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_64MB 0x00000050 /* 64MB */ -+#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_128MB 0x00000060 /* 128MB */ -+#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_256MB 0x00000070 /* 256MB */ -+/* NAND flash registers for BCM4706 (corerev = 31) */ -+#define BCMA_CC_NFLASH_CTL 0x01A0 -+#define BCMA_CC_NFLASH_CTL_ERR 0x08000000 -+#define BCMA_CC_NFLASH_CONF 0x01A4 -+#define BCMA_CC_NFLASH_COL_ADDR 0x01A8 -+#define BCMA_CC_NFLASH_ROW_ADDR 0x01AC -+#define BCMA_CC_NFLASH_DATA 0x01B0 -+#define BCMA_CC_NFLASH_WAITCNT0 0x01B4 - /* 0x1E0 is defined as shared BCMA_CLKCTLST */ - #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ - #define BCMA_CC_UART0_DATA 0x0300 -@@ -203,6 +316,9 @@ - #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ - #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ - #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 -+#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */ -+#define BCMA_CC_PMU_CTL_RES_SHIFT 13 -+#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */ - #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 - #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ - #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ -@@ -214,6 +330,8 @@ - #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */ - #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */ - #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */ -+#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100 -+#define BCMA_CC_PMU_STAT_WDRESET 0x00000080 - #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ - #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ - #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ -@@ -239,8 +357,66 @@ - #define BCMA_CC_REGCTL_DATA 0x065C - #define BCMA_CC_PLLCTL_ADDR 0x0660 - #define BCMA_CC_PLLCTL_DATA 0x0664 -+#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */ -+#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */ -+#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF -+#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000 -+#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31 - #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ --#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ -+/* NAND flash MLC controller registers (corerev >= 38) */ -+#define BCMA_CC_NAND_REVISION 0x0C00 -+#define BCMA_CC_NAND_CMD_START 0x0C04 -+#define BCMA_CC_NAND_CMD_ADDR_X 0x0C08 -+#define BCMA_CC_NAND_CMD_ADDR 0x0C0C -+#define BCMA_CC_NAND_CMD_END_ADDR 0x0C10 -+#define BCMA_CC_NAND_CS_NAND_SELECT 0x0C14 -+#define BCMA_CC_NAND_CS_NAND_XOR 0x0C18 -+#define BCMA_CC_NAND_SPARE_RD0 0x0C20 -+#define BCMA_CC_NAND_SPARE_RD4 0x0C24 -+#define BCMA_CC_NAND_SPARE_RD8 0x0C28 -+#define BCMA_CC_NAND_SPARE_RD12 0x0C2C -+#define BCMA_CC_NAND_SPARE_WR0 0x0C30 -+#define BCMA_CC_NAND_SPARE_WR4 0x0C34 -+#define BCMA_CC_NAND_SPARE_WR8 0x0C38 -+#define BCMA_CC_NAND_SPARE_WR12 0x0C3C -+#define BCMA_CC_NAND_ACC_CONTROL 0x0C40 -+#define BCMA_CC_NAND_CONFIG 0x0C48 -+#define BCMA_CC_NAND_TIMING_1 0x0C50 -+#define BCMA_CC_NAND_TIMING_2 0x0C54 -+#define BCMA_CC_NAND_SEMAPHORE 0x0C58 -+#define BCMA_CC_NAND_DEVID 0x0C60 -+#define BCMA_CC_NAND_DEVID_X 0x0C64 -+#define BCMA_CC_NAND_BLOCK_LOCK_STATUS 0x0C68 -+#define BCMA_CC_NAND_INTFC_STATUS 0x0C6C -+#define BCMA_CC_NAND_ECC_CORR_ADDR_X 0x0C70 -+#define BCMA_CC_NAND_ECC_CORR_ADDR 0x0C74 -+#define BCMA_CC_NAND_ECC_UNC_ADDR_X 0x0C78 -+#define BCMA_CC_NAND_ECC_UNC_ADDR 0x0C7C -+#define BCMA_CC_NAND_READ_ERROR_COUNT 0x0C80 -+#define BCMA_CC_NAND_CORR_STAT_THRESHOLD 0x0C84 -+#define BCMA_CC_NAND_READ_ADDR_X 0x0C90 -+#define BCMA_CC_NAND_READ_ADDR 0x0C94 -+#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR_X 0x0C98 -+#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR 0x0C9C -+#define BCMA_CC_NAND_COPY_BACK_ADDR_X 0x0CA0 -+#define BCMA_CC_NAND_COPY_BACK_ADDR 0x0CA4 -+#define BCMA_CC_NAND_BLOCK_ERASE_ADDR_X 0x0CA8 -+#define BCMA_CC_NAND_BLOCK_ERASE_ADDR 0x0CAC -+#define BCMA_CC_NAND_INV_READ_ADDR_X 0x0CB0 -+#define BCMA_CC_NAND_INV_READ_ADDR 0x0CB4 -+#define BCMA_CC_NAND_BLK_WR_PROTECT 0x0CC0 -+#define BCMA_CC_NAND_ACC_CONTROL_CS1 0x0CD0 -+#define BCMA_CC_NAND_CONFIG_CS1 0x0CD4 -+#define BCMA_CC_NAND_TIMING_1_CS1 0x0CD8 -+#define BCMA_CC_NAND_TIMING_2_CS1 0x0CDC -+#define BCMA_CC_NAND_SPARE_RD16 0x0D30 -+#define BCMA_CC_NAND_SPARE_RD20 0x0D34 -+#define BCMA_CC_NAND_SPARE_RD24 0x0D38 -+#define BCMA_CC_NAND_SPARE_RD28 0x0D3C -+#define BCMA_CC_NAND_CACHE_ADDR 0x0D40 -+#define BCMA_CC_NAND_CACHE_DATA 0x0D44 -+#define BCMA_CC_NAND_CTRL_CONFIG 0x0D48 -+#define BCMA_CC_NAND_CTRL_STATUS 0x0D4C - - /* Divider allocation in 4716/47162/5356 */ - #define BCMA_CC_PMU5_MAINPLL_CPU 1 -@@ -256,6 +432,32 @@ - - /* 4706 PMU */ - #define BCMA_CC_PMU4706_MAINPLL_PLL0 0 -+#define BCMA_CC_PMU6_4706_PROCPLL_OFF 4 /* The CPU PLL */ -+#define BCMA_CC_PMU6_4706_PROC_P2DIV_MASK 0x000f0000 -+#define BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT 16 -+#define BCMA_CC_PMU6_4706_PROC_P1DIV_MASK 0x0000f000 -+#define BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT 12 -+#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK 0x00000ff8 -+#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3 -+#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007 -+#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0 -+ -+/* PMU rev 15 */ -+#define BCMA_CC_PMU15_PLL_PLLCTL0 0 -+#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003 -+#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0 -+#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC -+#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2 -+#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000 -+#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22 -+#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000 -+#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24 -+#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000 -+#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27 -+#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000 -+#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30 -+#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000 -+#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31 - - /* ALP clock on pre-PMU chips */ - #define BCMA_CC_PMU_ALP_CLOCK 20000000 -@@ -284,6 +486,19 @@ - #define BCMA_CC_PPL_PCHI_OFF 5 - #define BCMA_CC_PPL_PCHI_MASK 0x0000003f - -+#define BCMA_CC_PMU_PLL_CTL0 0 -+#define BCMA_CC_PMU_PLL_CTL1 1 -+#define BCMA_CC_PMU_PLL_CTL2 2 -+#define BCMA_CC_PMU_PLL_CTL3 3 -+#define BCMA_CC_PMU_PLL_CTL4 4 -+#define BCMA_CC_PMU_PLL_CTL5 5 -+ -+#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000 -+#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT 20 -+ -+#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000 -+#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT 20 -+ - /* BCM4331 ChipControl numbers. */ - #define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ - #define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ -@@ -297,9 +512,56 @@ - #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ - #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ - #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ -+#define BCMA_CHIPCTL_4331_EXTPA_EN2 BIT(12) /* 0 ext pa disable, 1 ext pa enabled */ - #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ - #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ - -+/* 43224 chip-specific ChipControl register bits */ -+#define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */ -+#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */ -+#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */ -+ -+/* 4313 Chip specific ChipControl register bits */ -+#define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ -+ -+/* BCM5357 ChipControl register bits */ -+#define BCMA_CHIPCTL_5357_EXTPA BIT(14) -+#define BCMA_CHIPCTL_5357_ANT_MUX_2O3 BIT(15) -+#define BCMA_CHIPCTL_5357_NFLASH BIT(16) -+#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18) -+#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19) -+ -+#define BCMA_RES_4314_LPLDO_PU BIT(0) -+#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1) -+#define BCMA_RES_4314_PMU_BG_PU BIT(2) -+#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3) -+#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4) -+#define BCMA_RES_4314_CLDO_PU BIT(5) -+#define BCMA_RES_4314_LPLDO2_LVM BIT(6) -+#define BCMA_RES_4314_WL_PMU_PU BIT(7) -+#define BCMA_RES_4314_LNLDO_PU BIT(8) -+#define BCMA_RES_4314_LDO3P3_PU BIT(9) -+#define BCMA_RES_4314_OTP_PU BIT(10) -+#define BCMA_RES_4314_XTAL_PU BIT(11) -+#define BCMA_RES_4314_WL_PWRSW_PU BIT(12) -+#define BCMA_RES_4314_LQ_AVAIL BIT(13) -+#define BCMA_RES_4314_LOGIC_RET BIT(14) -+#define BCMA_RES_4314_MEM_SLEEP BIT(15) -+#define BCMA_RES_4314_MACPHY_RET BIT(16) -+#define BCMA_RES_4314_WL_CORE_READY BIT(17) -+#define BCMA_RES_4314_ILP_REQ BIT(18) -+#define BCMA_RES_4314_ALP_AVAIL BIT(19) -+#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20) -+#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21) -+#define BCMA_RES_4314_RX_PWRSW_PU BIT(22) -+#define BCMA_RES_4314_RADIO_PU BIT(23) -+#define BCMA_RES_4314_VCO_LDO_PU BIT(24) -+#define BCMA_RES_4314_AFE_LDO_PU BIT(25) -+#define BCMA_RES_4314_RX_LDO_PU BIT(26) -+#define BCMA_RES_4314_TX_LDO_PU BIT(27) -+#define BCMA_RES_4314_HT_AVAIL BIT(28) -+#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29) -+ - /* Data for the PMU, if available. - * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) - */ -@@ -310,11 +572,36 @@ struct bcma_chipcommon_pmu { - - #ifdef CONFIG_BCMA_DRIVER_MIPS - struct bcma_pflash { -+ bool present; - u8 buswidth; - u32 window; - u32 window_size; - }; - -+#ifdef CONFIG_BCMA_SFLASH -+struct bcma_sflash { -+ bool present; -+ u32 window; -+ u32 blocksize; -+ u16 numblocks; -+ u32 size; -+ -+ struct mtd_info *mtd; -+ void *priv; -+}; -+#endif -+ -+#ifdef CONFIG_BCMA_NFLASH -+struct mtd_info; -+ -+struct bcma_nflash { -+ bool present; -+ bool boot; /* This is the flash the SoC boots from */ -+ -+ struct mtd_info *mtd; -+}; -+#endif -+ - struct bcma_serial_port { - void *regs; - unsigned long clockspeed; -@@ -330,15 +617,30 @@ struct bcma_drv_cc { - u32 capabilities; - u32 capabilities_ext; - u8 setup_done:1; -+ u8 early_setup_done:1; - /* Fast Powerup Delay constant */ - u16 fast_pwrup_delay; - struct bcma_chipcommon_pmu pmu; - #ifdef CONFIG_BCMA_DRIVER_MIPS - struct bcma_pflash pflash; -+#ifdef CONFIG_BCMA_SFLASH -+ struct bcma_sflash sflash; -+#endif -+#ifdef CONFIG_BCMA_NFLASH -+ struct bcma_nflash nflash; -+#endif - - int nr_serial_ports; - struct bcma_serial_port serial_ports[4]; - #endif /* CONFIG_BCMA_DRIVER_MIPS */ -+ u32 ticks_per_ms; -+ struct platform_device *watchdog; -+ -+ /* Lock for GPIO register access. */ -+ spinlock_t gpio_lock; -+#ifdef CONFIG_BCMA_DRIVER_GPIO -+ struct gpio_chip gpio; -+#endif - }; - - /* Register access */ -@@ -355,14 +657,16 @@ struct bcma_drv_cc { - bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) - - extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); -+extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc); - - extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); - extern void bcma_chipco_resume(struct bcma_drv_cc *cc); - - void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); - --extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, -- u32 ticks); -+extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); -+ -+extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc); - - void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); - -@@ -375,9 +679,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d - u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value); - u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value); - u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); -+u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value); -+u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value); - - /* PMU support */ - extern void bcma_pmu_init(struct bcma_drv_cc *cc); -+extern void bcma_pmu_early_init(struct bcma_drv_cc *cc); - - extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, - u32 value); -@@ -387,5 +694,8 @@ extern void bcma_chipco_chipctl_maskset( - u32 offset, u32 mask, u32 set); - extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, - u32 offset, u32 mask, u32 set); -+extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid); -+ -+extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc); - - #endif /* LINUX_BCMA_DRIVER_CC_H_ */ ---- /dev/null -+++ b/include/linux/bcma/bcma_driver_gmac_cmn.h -@@ -0,0 +1,100 @@ -+#ifndef LINUX_BCMA_DRIVER_GMAC_CMN_H_ -+#define LINUX_BCMA_DRIVER_GMAC_CMN_H_ -+ -+#include -+ -+#define BCMA_GMAC_CMN_STAG0 0x000 -+#define BCMA_GMAC_CMN_STAG1 0x004 -+#define BCMA_GMAC_CMN_STAG2 0x008 -+#define BCMA_GMAC_CMN_STAG3 0x00C -+#define BCMA_GMAC_CMN_PARSER_CTL 0x020 -+#define BCMA_GMAC_CMN_MIB_MAX_LEN 0x024 -+#define BCMA_GMAC_CMN_PHY_ACCESS 0x100 -+#define BCMA_GMAC_CMN_PA_DATA_MASK 0x0000ffff -+#define BCMA_GMAC_CMN_PA_ADDR_MASK 0x001f0000 -+#define BCMA_GMAC_CMN_PA_ADDR_SHIFT 16 -+#define BCMA_GMAC_CMN_PA_REG_MASK 0x1f000000 -+#define BCMA_GMAC_CMN_PA_REG_SHIFT 24 -+#define BCMA_GMAC_CMN_PA_WRITE 0x20000000 -+#define BCMA_GMAC_CMN_PA_START 0x40000000 -+#define BCMA_GMAC_CMN_PHY_CTL 0x104 -+#define BCMA_GMAC_CMN_PC_EPA_MASK 0x0000001f -+#define BCMA_GMAC_CMN_PC_MCT_MASK 0x007f0000 -+#define BCMA_GMAC_CMN_PC_MCT_SHIFT 16 -+#define BCMA_GMAC_CMN_PC_MTE 0x00800000 -+#define BCMA_GMAC_CMN_GMAC0_RGMII_CTL 0x110 -+#define BCMA_GMAC_CMN_CFP_ACCESS 0x200 -+#define BCMA_GMAC_CMN_CFP_TCAM_DATA0 0x210 -+#define BCMA_GMAC_CMN_CFP_TCAM_DATA1 0x214 -+#define BCMA_GMAC_CMN_CFP_TCAM_DATA2 0x218 -+#define BCMA_GMAC_CMN_CFP_TCAM_DATA3 0x21C -+#define BCMA_GMAC_CMN_CFP_TCAM_DATA4 0x220 -+#define BCMA_GMAC_CMN_CFP_TCAM_DATA5 0x224 -+#define BCMA_GMAC_CMN_CFP_TCAM_DATA6 0x228 -+#define BCMA_GMAC_CMN_CFP_TCAM_DATA7 0x22C -+#define BCMA_GMAC_CMN_CFP_TCAM_MASK0 0x230 -+#define BCMA_GMAC_CMN_CFP_TCAM_MASK1 0x234 -+#define BCMA_GMAC_CMN_CFP_TCAM_MASK2 0x238 -+#define BCMA_GMAC_CMN_CFP_TCAM_MASK3 0x23C -+#define BCMA_GMAC_CMN_CFP_TCAM_MASK4 0x240 -+#define BCMA_GMAC_CMN_CFP_TCAM_MASK5 0x244 -+#define BCMA_GMAC_CMN_CFP_TCAM_MASK6 0x248 -+#define BCMA_GMAC_CMN_CFP_TCAM_MASK7 0x24C -+#define BCMA_GMAC_CMN_CFP_ACTION_DATA 0x250 -+#define BCMA_GMAC_CMN_TCAM_BIST_CTL 0x2A0 -+#define BCMA_GMAC_CMN_TCAM_BIST_STATUS 0x2A4 -+#define BCMA_GMAC_CMN_TCAM_CMP_STATUS 0x2A8 -+#define BCMA_GMAC_CMN_TCAM_DISABLE 0x2AC -+#define BCMA_GMAC_CMN_TCAM_TEST_CTL 0x2F0 -+#define BCMA_GMAC_CMN_UDF_0_A3_A0 0x300 -+#define BCMA_GMAC_CMN_UDF_0_A7_A4 0x304 -+#define BCMA_GMAC_CMN_UDF_0_A8 0x308 -+#define BCMA_GMAC_CMN_UDF_1_A3_A0 0x310 -+#define BCMA_GMAC_CMN_UDF_1_A7_A4 0x314 -+#define BCMA_GMAC_CMN_UDF_1_A8 0x318 -+#define BCMA_GMAC_CMN_UDF_2_A3_A0 0x320 -+#define BCMA_GMAC_CMN_UDF_2_A7_A4 0x324 -+#define BCMA_GMAC_CMN_UDF_2_A8 0x328 -+#define BCMA_GMAC_CMN_UDF_0_B3_B0 0x330 -+#define BCMA_GMAC_CMN_UDF_0_B7_B4 0x334 -+#define BCMA_GMAC_CMN_UDF_0_B8 0x338 -+#define BCMA_GMAC_CMN_UDF_1_B3_B0 0x340 -+#define BCMA_GMAC_CMN_UDF_1_B7_B4 0x344 -+#define BCMA_GMAC_CMN_UDF_1_B8 0x348 -+#define BCMA_GMAC_CMN_UDF_2_B3_B0 0x350 -+#define BCMA_GMAC_CMN_UDF_2_B7_B4 0x354 -+#define BCMA_GMAC_CMN_UDF_2_B8 0x358 -+#define BCMA_GMAC_CMN_UDF_0_C3_C0 0x360 -+#define BCMA_GMAC_CMN_UDF_0_C7_C4 0x364 -+#define BCMA_GMAC_CMN_UDF_0_C8 0x368 -+#define BCMA_GMAC_CMN_UDF_1_C3_C0 0x370 -+#define BCMA_GMAC_CMN_UDF_1_C7_C4 0x374 -+#define BCMA_GMAC_CMN_UDF_1_C8 0x378 -+#define BCMA_GMAC_CMN_UDF_2_C3_C0 0x380 -+#define BCMA_GMAC_CMN_UDF_2_C7_C4 0x384 -+#define BCMA_GMAC_CMN_UDF_2_C8 0x388 -+#define BCMA_GMAC_CMN_UDF_0_D3_D0 0x390 -+#define BCMA_GMAC_CMN_UDF_0_D7_D4 0x394 -+#define BCMA_GMAC_CMN_UDF_0_D11_D8 0x394 -+ -+struct bcma_drv_gmac_cmn { -+ struct bcma_device *core; -+ -+ /* Drivers accessing BCMA_GMAC_CMN_PHY_ACCESS and -+ * BCMA_GMAC_CMN_PHY_CTL need to take that mutex first. */ -+ struct mutex phy_mutex; -+}; -+ -+/* Register access */ -+#define gmac_cmn_read16(gc, offset) bcma_read16((gc)->core, offset) -+#define gmac_cmn_read32(gc, offset) bcma_read32((gc)->core, offset) -+#define gmac_cmn_write16(gc, offset, val) bcma_write16((gc)->core, offset, val) -+#define gmac_cmn_write32(gc, offset, val) bcma_write32((gc)->core, offset, val) -+ -+#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN -+extern void __devinit bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc); -+#else -+static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) { } -+#endif -+ -+#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */ ---- a/include/linux/bcma/bcma_driver_mips.h -+++ b/include/linux/bcma/bcma_driver_mips.h -@@ -28,6 +28,7 @@ - #define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 - #define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 - -+#define BCMA_MIPS_OOBSELINA74 0x004 - #define BCMA_MIPS_OOBSELOUTA30 0x100 - - struct bcma_device; -@@ -35,17 +36,24 @@ struct bcma_device; - struct bcma_drv_mips { - struct bcma_device *core; - u8 setup_done:1; -- unsigned int assigned_irqs; -+ u8 early_setup_done:1; - }; - - #ifdef CONFIG_BCMA_DRIVER_MIPS - extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); -+extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore); -+ -+extern unsigned int bcma_core_irq(struct bcma_device *core); - #else - static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } -+static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { } -+ -+static inline unsigned int bcma_core_irq(struct bcma_device *core) -+{ -+ return 0; -+} - #endif - - extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); - --extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); -- - #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ ---- a/include/linux/bcma/bcma_driver_pci.h -+++ b/include/linux/bcma/bcma_driver_pci.h -@@ -53,11 +53,47 @@ struct pci_dev; - #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 - #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ - #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 -+#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ -+#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ -+#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ -+#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ -+#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 -+#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ -+#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ -+#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ -+#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ -+#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ -+#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ -+#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ -+#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ -+#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ -+#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ -+#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ -+#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ -+#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ -+#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ -+#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ -+#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ -+#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ -+#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ -+#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ -+#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ -+#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ -+#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ -+#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ -+#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ - #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ - #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ - #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ - #define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */ - #define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */ -+#define BCMA_CORE_PCI_SPROM_PI_OFFSET 0 /* first word */ -+#define BCMA_CORE_PCI_SPROM_PI_MASK 0xf000 /* bit 15:12 */ -+#define BCMA_CORE_PCI_SPROM_PI_SHIFT 12 /* bit 15:12 */ -+#define BCMA_CORE_PCI_SPROM_MISC_CONFIG 5 /* word 5 */ -+#define BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */ -+#define BCMA_CORE_PCI_SPROM_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */ -+#define BCMA_CORE_PCI_SPROM_CLKREQ_ENB 0x0800 /* bit 11 */ - - /* SBtoPCIx */ - #define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000 -@@ -72,20 +108,143 @@ struct pci_dev; - #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ - #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ - -+/* PCIE protocol PHY diagnostic registers */ -+#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ -+#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ -+#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ -+#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ -+#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ -+#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ -+#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ -+#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ -+#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ -+#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ -+#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ -+#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ -+#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ -+#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ -+#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ -+#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ -+#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ -+ -+/* PCIE protocol DLLP diagnostic registers */ -+#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ -+#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ -+#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ -+#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) -+#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ -+#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ -+#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ -+#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ -+#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ -+#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ -+#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ -+#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ -+#define BCMA_CORE_PCI_ASPMTIMER_EXTEND 0x01000000 /* > rev7: enable extend ASPM timer */ -+#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ -+#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ -+#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ -+#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ -+#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ -+#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ -+#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ -+#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ -+#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ -+#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ -+#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ -+ -+/* SERDES RX registers */ -+#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ -+#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ -+#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ -+#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ -+#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ -+#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ -+ -+/* SERDES PLL registers */ -+#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ -+#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ -+ - /* PCIcore specific boardflags */ - #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ - -+/* PCIE Config space accessing MACROS */ -+#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ -+#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ -+#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ -+#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ -+ -+#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ -+#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ -+#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ -+#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ -+ -+#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 -+ -+#define BCMA_CORE_PCI_ -+ -+/* MDIO devices (SERDES modules) */ -+#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 -+#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 -+#define BCMA_CORE_PCI_MDIO_BLK0 0x800 -+#define BCMA_CORE_PCI_MDIO_BLK1 0x801 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A -+#define BCMA_CORE_PCI_MDIO_BLK2 0x802 -+#define BCMA_CORE_PCI_MDIO_BLK3 0x803 -+#define BCMA_CORE_PCI_MDIO_BLK4 0x804 -+#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ -+#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 -+#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 -+#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 -+ -+/* PCIE Root Capability Register bits (Host mode only) */ -+#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 -+ -+struct bcma_drv_pci; -+struct bcma_bus; -+ -+#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+struct bcma_drv_pci_host { -+ struct bcma_drv_pci *pdev; -+ -+ u32 host_cfg_addr; -+ spinlock_t cfgspace_lock; -+ -+ struct pci_controller pci_controller; -+ struct pci_ops pci_ops; -+ struct resource mem_resource; -+ struct resource io_resource; -+}; -+#endif -+ - struct bcma_drv_pci { - struct bcma_device *core; - u8 setup_done:1; -+ u8 hostmode:1; -+ -+#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+ struct bcma_drv_pci_host *host_controller; -+#endif - }; - - /* Register access */ -+#define pcicore_read16(pc, offset) bcma_read16((pc)->core, offset) - #define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) -+#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val) - #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) - --extern void bcma_core_pci_init(struct bcma_drv_pci *pc); -+extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); - extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, - struct bcma_device *core, bool enable); -+extern void bcma_core_pci_up(struct bcma_bus *bus); -+extern void bcma_core_pci_down(struct bcma_bus *bus); -+extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up); -+ -+extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); -+extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); - - #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ ---- a/include/linux/bcma/bcma_regs.h -+++ b/include/linux/bcma/bcma_regs.h -@@ -11,11 +11,13 @@ - #define BCMA_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ - #define BCMA_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ - #define BCMA_CLKCTLST_EXTRESREQ 0x00000700 /* Mask of external resource requests */ -+#define BCMA_CLKCTLST_EXTRESREQ_SHIFT 8 - #define BCMA_CLKCTLST_HAVEALP 0x00010000 /* ALP available */ - #define BCMA_CLKCTLST_HAVEHT 0x00020000 /* HT available */ - #define BCMA_CLKCTLST_BP_ON_ALP 0x00040000 /* RO: running on ALP clock */ - #define BCMA_CLKCTLST_BP_ON_HT 0x00080000 /* RO: running on HT clock */ - #define BCMA_CLKCTLST_EXTRESST 0x07000000 /* Mask of external resource status */ -+#define BCMA_CLKCTLST_EXTRESST_SHIFT 24 - /* Is there any BCM4328 on BCMA bus? */ - #define BCMA_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */ - #define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ -@@ -35,6 +37,7 @@ - #define BCMA_IOST_BIST_DONE 0x8000 - #define BCMA_RESET_CTL 0x0800 - #define BCMA_RESET_CTL_RESET 0x0001 -+#define BCMA_RESET_ST 0x0804 - - /* BCMA PCI config space registers. */ - #define BCMA_PCI_PMCSR 0x44 -@@ -56,4 +59,36 @@ - #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ - #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ - -+/* SiliconBackplane Address Map. -+ * All regions may not exist on all chips. -+ */ -+#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ -+#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ -+#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) -+#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ -+#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ -+#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ -+ -+ -+#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ -+#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ -+#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ -+#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 -+ * (2 ZettaBytes), low 32 bits -+ */ -+#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 -+ * (2 ZettaBytes), high 32 bits -+ */ -+ -+#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ -+#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ -+#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 -+ * (2 ZettaBytes), high 32 bits -+ */ -+ -+#define BCMA_SOC_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */ -+#define BCMA_SOC_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */ -+#define BCMA_SOC_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ -+#define BCMA_SOC_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ -+ - #endif /* LINUX_BCMA_REGS_H_ */ ---- a/drivers/net/wireless/b43/main.c -+++ b/drivers/net/wireless/b43/main.c -@@ -4618,7 +4618,7 @@ static int b43_wireless_core_init(struct - switch (dev->dev->bus_type) { - #ifdef CONFIG_B43_BCMA - case B43_BUS_BCMA: -- bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci, -+ bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0], - dev->dev->bdev, true); - break; - #endif ---- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c -@@ -533,7 +533,7 @@ ai_buscore_setup(struct si_info *sii, st - - /* fixup necessary chip/core configurations */ - if (!sii->pch) { -- sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci.core); -+ sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci[0].core); - if (sii->pch == NULL) - return false; - } diff --git a/target/linux/generic/patches-3.3/040-Controlled-Delay-AQM.patch b/target/linux/generic/patches-3.3/040-Controlled-Delay-AQM.patch deleted file mode 100644 index 85f563b9f2..0000000000 --- a/target/linux/generic/patches-3.3/040-Controlled-Delay-AQM.patch +++ /dev/null @@ -1,757 +0,0 @@ -From a93fd80d261f1dc2788442dba8dd5701363d3d6e Mon Sep 17 00:00:00 2001 -From: Eric Dumazet -Date: Thu, 10 May 2012 07:51:25 +0000 -Subject: [PATCH] codel: Controlled Delay AQM - -commit 76e3cc126bb223013a6b9a0e2a51238d1ef2e409 upstream. - -An implementation of CoDel AQM, from Kathleen Nichols and Van Jacobson. - -http://queue.acm.org/detail.cfm?id=2209336 - -This AQM main input is no longer queue size in bytes or packets, but the -delay packets stay in (FIFO) queue. - -As we don't have infinite memory, we still can drop packets in enqueue() -in case of massive load, but mean of CoDel is to drop packets in -dequeue(), using a control law based on two simple parameters : - -target : target sojourn time (default 5ms) -interval : width of moving time window (default 100ms) - -Based on initial work from Dave Taht. - -Refactored to help future codel inclusion as a plugin for other linux -qdisc (FQ_CODEL, ...), like RED. - -include/net/codel.h contains codel algorithm as close as possible than -Kathleen reference. - -net/sched/sch_codel.c contains the linux qdisc specific glue. - -Separate structures permit a memory efficient implementation of fq_codel -(to be sent as a separate work) : Each flow has its own struct -codel_vars. - -timestamps are taken at enqueue() time with 1024 ns precision, allowing -a range of 2199 seconds in queue, and 100Gb links support. iproute2 uses -usec as base unit. - -Selected packets are dropped, unless ECN is enabled and packets can get -ECN mark instead. - -Tested from 2Mb to 10Gb speeds with no particular problems, on ixgbe and -tg3 drivers (BQL enabled). - -Usage: tc qdisc ... codel [ limit PACKETS ] [ target TIME ] - [ interval TIME ] [ ecn ] - -qdisc codel 10: parent 1:1 limit 2000p target 3.0ms interval 60.0ms ecn - Sent 13347099587 bytes 8815805 pkt (dropped 0, overlimits 0 requeues 0) - rate 202365Kbit 16708pps backlog 113550b 75p requeues 0 - count 116 lastcount 98 ldelay 4.3ms dropping drop_next 816us - maxpacket 1514 ecn_mark 84399 drop_overlimit 0 - -CoDel must be seen as a base module, and should be used keeping in mind -there is still a FIFO queue. So a typical setup will probably need a -hierarchy of several qdiscs and packet classifiers to be able to meet -whatever constraints a user might have. - -One possible example would be to use fq_codel, which combines Fair -Queueing and CoDel, in replacement of sfq / sfq_red. - -Signed-off-by: Eric Dumazet -Signed-off-by: Dave Taht -Cc: Kathleen Nichols -Cc: Van Jacobson -Cc: Tom Herbert -Cc: Matt Mathis -Cc: Yuchung Cheng -Cc: Stephen Hemminger -Signed-off-by: David S. Miller ---- - include/linux/pkt_sched.h | 26 ++++ - include/net/codel.h | 332 +++++++++++++++++++++++++++++++++++++++++++++ - net/sched/Kconfig | 11 ++ - net/sched/Makefile | 1 + - net/sched/sch_codel.c | 275 +++++++++++++++++++++++++++++++++++++ - 5 files changed, 645 insertions(+) - create mode 100644 include/net/codel.h - create mode 100644 net/sched/sch_codel.c - ---- a/include/linux/pkt_sched.h -+++ b/include/linux/pkt_sched.h -@@ -633,4 +633,30 @@ struct tc_qfq_stats { - __u32 lmax; - }; - -+/* CODEL */ -+ -+enum { -+ TCA_CODEL_UNSPEC, -+ TCA_CODEL_TARGET, -+ TCA_CODEL_LIMIT, -+ TCA_CODEL_INTERVAL, -+ TCA_CODEL_ECN, -+ __TCA_CODEL_MAX -+}; -+ -+#define TCA_CODEL_MAX (__TCA_CODEL_MAX - 1) -+ -+struct tc_codel_xstats { -+ __u32 maxpacket; /* largest packet we've seen so far */ -+ __u32 count; /* how many drops we've done since the last time we -+ * entered dropping state -+ */ -+ __u32 lastcount; /* count at entry to dropping state */ -+ __u32 ldelay; /* in-queue delay seen by most recently dequeued packet */ -+ __s32 drop_next; /* time to drop next packet */ -+ __u32 drop_overlimit; /* number of time max qdisc packet limit was hit */ -+ __u32 ecn_mark; /* number of packets we ECN marked instead of dropped */ -+ __u32 dropping; /* are we in dropping state ? */ -+}; -+ - #endif ---- /dev/null -+++ b/include/net/codel.h -@@ -0,0 +1,332 @@ -+#ifndef __NET_SCHED_CODEL_H -+#define __NET_SCHED_CODEL_H -+ -+/* -+ * Codel - The Controlled-Delay Active Queue Management algorithm -+ * -+ * Copyright (C) 2011-2012 Kathleen Nichols -+ * Copyright (C) 2011-2012 Van Jacobson -+ * Copyright (C) 2012 Michael D. Taht -+ * Copyright (C) 2012 Eric Dumazet -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the authors may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * Alternatively, provided that this notice is retained in full, this -+ * software may be distributed under the terms of the GNU General -+ * Public License ("GPL") version 2, in which case the provisions of the -+ * GPL apply INSTEAD OF those given above. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+/* Controlling Queue Delay (CoDel) algorithm -+ * ========================================= -+ * Source : Kathleen Nichols and Van Jacobson -+ * http://queue.acm.org/detail.cfm?id=2209336 -+ * -+ * Implemented on linux by Dave Taht and Eric Dumazet -+ */ -+ -+ -+/* CoDel uses a 1024 nsec clock, encoded in u32 -+ * This gives a range of 2199 seconds, because of signed compares -+ */ -+typedef u32 codel_time_t; -+typedef s32 codel_tdiff_t; -+#define CODEL_SHIFT 10 -+#define MS2TIME(a) ((a * NSEC_PER_MSEC) >> CODEL_SHIFT) -+ -+static inline codel_time_t codel_get_time(void) -+{ -+ u64 ns = ktime_to_ns(ktime_get()); -+ -+ return ns >> CODEL_SHIFT; -+} -+ -+#define codel_time_after(a, b) ((s32)(a) - (s32)(b) > 0) -+#define codel_time_after_eq(a, b) ((s32)(a) - (s32)(b) >= 0) -+#define codel_time_before(a, b) ((s32)(a) - (s32)(b) < 0) -+#define codel_time_before_eq(a, b) ((s32)(a) - (s32)(b) <= 0) -+ -+/* Qdiscs using codel plugin must use codel_skb_cb in their own cb[] */ -+struct codel_skb_cb { -+ codel_time_t enqueue_time; -+}; -+ -+static struct codel_skb_cb *get_codel_cb(const struct sk_buff *skb) -+{ -+ qdisc_cb_private_validate(skb, sizeof(struct codel_skb_cb)); -+ return (struct codel_skb_cb *)qdisc_skb_cb(skb)->data; -+} -+ -+static codel_time_t codel_get_enqueue_time(const struct sk_buff *skb) -+{ -+ return get_codel_cb(skb)->enqueue_time; -+} -+ -+static void codel_set_enqueue_time(struct sk_buff *skb) -+{ -+ get_codel_cb(skb)->enqueue_time = codel_get_time(); -+} -+ -+static inline u32 codel_time_to_us(codel_time_t val) -+{ -+ u64 valns = ((u64)val << CODEL_SHIFT); -+ -+ do_div(valns, NSEC_PER_USEC); -+ return (u32)valns; -+} -+ -+/** -+ * struct codel_params - contains codel parameters -+ * @target: target queue size (in time units) -+ * @interval: width of moving time window -+ * @ecn: is Explicit Congestion Notification enabled -+ */ -+struct codel_params { -+ codel_time_t target; -+ codel_time_t interval; -+ bool ecn; -+}; -+ -+/** -+ * struct codel_vars - contains codel variables -+ * @count: how many drops we've done since the last time we -+ * entered dropping state -+ * @lastcount: count at entry to dropping state -+ * @dropping: set to true if in dropping state -+ * @first_above_time: when we went (or will go) continuously above target -+ * for interval -+ * @drop_next: time to drop next packet, or when we dropped last -+ * @ldelay: sojourn time of last dequeued packet -+ */ -+struct codel_vars { -+ u32 count; -+ u32 lastcount; -+ bool dropping; -+ codel_time_t first_above_time; -+ codel_time_t drop_next; -+ codel_time_t ldelay; -+}; -+ -+/** -+ * struct codel_stats - contains codel shared variables and stats -+ * @maxpacket: largest packet we've seen so far -+ * @drop_count: temp count of dropped packets in dequeue() -+ * ecn_mark: number of packets we ECN marked instead of dropping -+ */ -+struct codel_stats { -+ u32 maxpacket; -+ u32 drop_count; -+ u32 ecn_mark; -+}; -+ -+static void codel_params_init(struct codel_params *params) -+{ -+ params->interval = MS2TIME(100); -+ params->target = MS2TIME(5); -+ params->ecn = false; -+} -+ -+static void codel_vars_init(struct codel_vars *vars) -+{ -+ vars->drop_next = 0; -+ vars->first_above_time = 0; -+ vars->dropping = false; /* exit dropping state */ -+ vars->count = 0; -+ vars->lastcount = 0; -+} -+ -+static void codel_stats_init(struct codel_stats *stats) -+{ -+ stats->maxpacket = 256; -+} -+ -+/* return interval/sqrt(x) with good precision -+ * relies on int_sqrt(unsigned long x) kernel implementation -+ */ -+static u32 codel_inv_sqrt(u32 _interval, u32 _x) -+{ -+ u64 interval = _interval; -+ unsigned long x = _x; -+ -+ /* Scale operands for max precision */ -+ -+#if BITS_PER_LONG == 64 -+ x <<= 32; /* On 64bit arches, we can prescale x by 32bits */ -+ interval <<= 16; -+#endif -+ -+ while (x < (1UL << (BITS_PER_LONG - 2))) { -+ x <<= 2; -+ interval <<= 1; -+ } -+ do_div(interval, int_sqrt(x)); -+ return (u32)interval; -+} -+ -+static codel_time_t codel_control_law(codel_time_t t, -+ codel_time_t interval, -+ u32 count) -+{ -+ return t + codel_inv_sqrt(interval, count); -+} -+ -+ -+static bool codel_should_drop(struct sk_buff *skb, -+ unsigned int *backlog, -+ struct codel_vars *vars, -+ struct codel_params *params, -+ struct codel_stats *stats, -+ codel_time_t now) -+{ -+ bool ok_to_drop; -+ -+ if (!skb) { -+ vars->first_above_time = 0; -+ return false; -+ } -+ -+ vars->ldelay = now - codel_get_enqueue_time(skb); -+ *backlog -= qdisc_pkt_len(skb); -+ -+ if (unlikely(qdisc_pkt_len(skb) > stats->maxpacket)) -+ stats->maxpacket = qdisc_pkt_len(skb); -+ -+ if (codel_time_before(vars->ldelay, params->target) || -+ *backlog <= stats->maxpacket) { -+ /* went below - stay below for at least interval */ -+ vars->first_above_time = 0; -+ return false; -+ } -+ ok_to_drop = false; -+ if (vars->first_above_time == 0) { -+ /* just went above from below. If we stay above -+ * for at least interval we'll say it's ok to drop -+ */ -+ vars->first_above_time = now + params->interval; -+ } else if (codel_time_after(now, vars->first_above_time)) { -+ ok_to_drop = true; -+ } -+ return ok_to_drop; -+} -+ -+typedef struct sk_buff * (*codel_skb_dequeue_t)(struct codel_vars *vars, -+ struct Qdisc *sch); -+ -+static struct sk_buff *codel_dequeue(struct Qdisc *sch, -+ struct codel_params *params, -+ struct codel_vars *vars, -+ struct codel_stats *stats, -+ codel_skb_dequeue_t dequeue_func, -+ u32 *backlog) -+{ -+ struct sk_buff *skb = dequeue_func(vars, sch); -+ codel_time_t now; -+ bool drop; -+ -+ if (!skb) { -+ vars->dropping = false; -+ return skb; -+ } -+ now = codel_get_time(); -+ drop = codel_should_drop(skb, backlog, vars, params, stats, now); -+ if (vars->dropping) { -+ if (!drop) { -+ /* sojourn time below target - leave dropping state */ -+ vars->dropping = false; -+ } else if (codel_time_after_eq(now, vars->drop_next)) { -+ /* It's time for the next drop. Drop the current -+ * packet and dequeue the next. The dequeue might -+ * take us out of dropping state. -+ * If not, schedule the next drop. -+ * A large backlog might result in drop rates so high -+ * that the next drop should happen now, -+ * hence the while loop. -+ */ -+ while (vars->dropping && -+ codel_time_after_eq(now, vars->drop_next)) { -+ if (++vars->count == 0) /* avoid zero divides */ -+ vars->count = ~0U; -+ if (params->ecn && INET_ECN_set_ce(skb)) { -+ stats->ecn_mark++; -+ vars->drop_next = -+ codel_control_law(vars->drop_next, -+ params->interval, -+ vars->count); -+ goto end; -+ } -+ qdisc_drop(skb, sch); -+ stats->drop_count++; -+ skb = dequeue_func(vars, sch); -+ if (!codel_should_drop(skb, backlog, -+ vars, params, stats, now)) { -+ /* leave dropping state */ -+ vars->dropping = false; -+ } else { -+ /* and schedule the next drop */ -+ vars->drop_next = -+ codel_control_law(vars->drop_next, -+ params->interval, -+ vars->count); -+ } -+ } -+ } -+ } else if (drop) { -+ if (params->ecn && INET_ECN_set_ce(skb)) { -+ stats->ecn_mark++; -+ } else { -+ qdisc_drop(skb, sch); -+ stats->drop_count++; -+ -+ skb = dequeue_func(vars, sch); -+ drop = codel_should_drop(skb, backlog, vars, params, -+ stats, now); -+ } -+ vars->dropping = true; -+ /* if min went above target close to when we last went below it -+ * assume that the drop rate that controlled the queue on the -+ * last cycle is a good starting point to control it now. -+ */ -+ if (codel_time_before(now - vars->drop_next, -+ 16 * params->interval)) { -+ vars->count = (vars->count - vars->lastcount) | 1; -+ } else { -+ vars->count = 1; -+ } -+ vars->lastcount = vars->count; -+ vars->drop_next = codel_control_law(now, params->interval, -+ vars->count); -+ } -+end: -+ return skb; -+} -+#endif ---- a/net/sched/Kconfig -+++ b/net/sched/Kconfig -@@ -250,6 +250,17 @@ config NET_SCH_QFQ - - If unsure, say N. - -+config NET_SCH_CODEL -+ tristate "Controlled Delay AQM (CODEL)" -+ help -+ Say Y here if you want to use the Controlled Delay (CODEL) -+ packet scheduling algorithm. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called sch_codel. -+ -+ If unsure, say N. -+ - config NET_SCH_INGRESS - tristate "Ingress Qdisc" - depends on NET_CLS_ACT ---- a/net/sched/Makefile -+++ b/net/sched/Makefile -@@ -36,6 +36,7 @@ obj-$(CONFIG_NET_SCH_DRR) += sch_drr.o - obj-$(CONFIG_NET_SCH_MQPRIO) += sch_mqprio.o - obj-$(CONFIG_NET_SCH_CHOKE) += sch_choke.o - obj-$(CONFIG_NET_SCH_QFQ) += sch_qfq.o -+obj-$(CONFIG_NET_SCH_CODEL) += sch_codel.o - - obj-$(CONFIG_NET_CLS_U32) += cls_u32.o - obj-$(CONFIG_NET_CLS_ROUTE4) += cls_route.o ---- /dev/null -+++ b/net/sched/sch_codel.c -@@ -0,0 +1,275 @@ -+/* -+ * Codel - The Controlled-Delay Active Queue Management algorithm -+ * -+ * Copyright (C) 2011-2012 Kathleen Nichols -+ * Copyright (C) 2011-2012 Van Jacobson -+ * -+ * Implemented on linux by : -+ * Copyright (C) 2012 Michael D. Taht -+ * Copyright (C) 2012 Eric Dumazet -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the authors may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * Alternatively, provided that this notice is retained in full, this -+ * software may be distributed under the terms of the GNU General -+ * Public License ("GPL") version 2, in which case the provisions of the -+ * GPL apply INSTEAD OF those given above. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+ -+#define DEFAULT_CODEL_LIMIT 1000 -+ -+struct codel_sched_data { -+ struct codel_params params; -+ struct codel_vars vars; -+ struct codel_stats stats; -+ u32 drop_overlimit; -+}; -+ -+/* This is the specific function called from codel_dequeue() -+ * to dequeue a packet from queue. Note: backlog is handled in -+ * codel, we dont need to reduce it here. -+ */ -+static struct sk_buff *dequeue(struct codel_vars *vars, struct Qdisc *sch) -+{ -+ struct sk_buff *skb = __skb_dequeue(&sch->q); -+ -+ prefetch(&skb->end); /* we'll need skb_shinfo() */ -+ return skb; -+} -+ -+static struct sk_buff *codel_qdisc_dequeue(struct Qdisc *sch) -+{ -+ struct codel_sched_data *q = qdisc_priv(sch); -+ struct sk_buff *skb; -+ -+ skb = codel_dequeue(sch, &q->params, &q->vars, &q->stats, -+ dequeue, &sch->qstats.backlog); -+ /* We cant call qdisc_tree_decrease_qlen() if our qlen is 0, -+ * or HTB crashes. Defer it for next round. -+ */ -+ if (q->stats.drop_count && sch->q.qlen) { -+ qdisc_tree_decrease_qlen(sch, q->stats.drop_count); -+ q->stats.drop_count = 0; -+ } -+ if (skb) -+ qdisc_bstats_update(sch, skb); -+ return skb; -+} -+ -+static int codel_qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch) -+{ -+ struct codel_sched_data *q; -+ -+ if (likely(qdisc_qlen(sch) < sch->limit)) { -+ codel_set_enqueue_time(skb); -+ return qdisc_enqueue_tail(skb, sch); -+ } -+ q = qdisc_priv(sch); -+ q->drop_overlimit++; -+ return qdisc_drop(skb, sch); -+} -+ -+static const struct nla_policy codel_policy[TCA_CODEL_MAX + 1] = { -+ [TCA_CODEL_TARGET] = { .type = NLA_U32 }, -+ [TCA_CODEL_LIMIT] = { .type = NLA_U32 }, -+ [TCA_CODEL_INTERVAL] = { .type = NLA_U32 }, -+ [TCA_CODEL_ECN] = { .type = NLA_U32 }, -+}; -+ -+static int codel_change(struct Qdisc *sch, struct nlattr *opt) -+{ -+ struct codel_sched_data *q = qdisc_priv(sch); -+ struct nlattr *tb[TCA_CODEL_MAX + 1]; -+ unsigned int qlen; -+ int err; -+ -+ if (!opt) -+ return -EINVAL; -+ -+ err = nla_parse_nested(tb, TCA_CODEL_MAX, opt, codel_policy); -+ if (err < 0) -+ return err; -+ -+ sch_tree_lock(sch); -+ -+ if (tb[TCA_CODEL_TARGET]) { -+ u32 target = nla_get_u32(tb[TCA_CODEL_TARGET]); -+ -+ q->params.target = ((u64)target * NSEC_PER_USEC) >> CODEL_SHIFT; -+ } -+ -+ if (tb[TCA_CODEL_INTERVAL]) { -+ u32 interval = nla_get_u32(tb[TCA_CODEL_INTERVAL]); -+ -+ q->params.interval = ((u64)interval * NSEC_PER_USEC) >> CODEL_SHIFT; -+ } -+ -+ if (tb[TCA_CODEL_LIMIT]) -+ sch->limit = nla_get_u32(tb[TCA_CODEL_LIMIT]); -+ -+ if (tb[TCA_CODEL_ECN]) -+ q->params.ecn = !!nla_get_u32(tb[TCA_CODEL_ECN]); -+ -+ qlen = sch->q.qlen; -+ while (sch->q.qlen > sch->limit) { -+ struct sk_buff *skb = __skb_dequeue(&sch->q); -+ -+ sch->qstats.backlog -= qdisc_pkt_len(skb); -+ qdisc_drop(skb, sch); -+ } -+ qdisc_tree_decrease_qlen(sch, qlen - sch->q.qlen); -+ -+ sch_tree_unlock(sch); -+ return 0; -+} -+ -+static int codel_init(struct Qdisc *sch, struct nlattr *opt) -+{ -+ struct codel_sched_data *q = qdisc_priv(sch); -+ -+ sch->limit = DEFAULT_CODEL_LIMIT; -+ -+ codel_params_init(&q->params); -+ codel_vars_init(&q->vars); -+ codel_stats_init(&q->stats); -+ -+ if (opt) { -+ int err = codel_change(sch, opt); -+ -+ if (err) -+ return err; -+ } -+ -+ if (sch->limit >= 1) -+ sch->flags |= TCQ_F_CAN_BYPASS; -+ else -+ sch->flags &= ~TCQ_F_CAN_BYPASS; -+ -+ return 0; -+} -+ -+static int codel_dump(struct Qdisc *sch, struct sk_buff *skb) -+{ -+ struct codel_sched_data *q = qdisc_priv(sch); -+ struct nlattr *opts; -+ -+ opts = nla_nest_start(skb, TCA_OPTIONS); -+ if (opts == NULL) -+ goto nla_put_failure; -+ -+ if (nla_put_u32(skb, TCA_CODEL_TARGET, -+ codel_time_to_us(q->params.target)) || -+ nla_put_u32(skb, TCA_CODEL_LIMIT, -+ sch->limit) || -+ nla_put_u32(skb, TCA_CODEL_INTERVAL, -+ codel_time_to_us(q->params.interval)) || -+ nla_put_u32(skb, TCA_CODEL_ECN, -+ q->params.ecn)) -+ goto nla_put_failure; -+ -+ return nla_nest_end(skb, opts); -+ -+nla_put_failure: -+ nla_nest_cancel(skb, opts); -+ return -1; -+} -+ -+static int codel_dump_stats(struct Qdisc *sch, struct gnet_dump *d) -+{ -+ const struct codel_sched_data *q = qdisc_priv(sch); -+ struct tc_codel_xstats st = { -+ .maxpacket = q->stats.maxpacket, -+ .count = q->vars.count, -+ .lastcount = q->vars.lastcount, -+ .drop_overlimit = q->drop_overlimit, -+ .ldelay = codel_time_to_us(q->vars.ldelay), -+ .dropping = q->vars.dropping, -+ .ecn_mark = q->stats.ecn_mark, -+ }; -+ -+ if (q->vars.dropping) { -+ codel_tdiff_t delta = q->vars.drop_next - codel_get_time(); -+ -+ if (delta >= 0) -+ st.drop_next = codel_time_to_us(delta); -+ else -+ st.drop_next = -codel_time_to_us(-delta); -+ } -+ -+ return gnet_stats_copy_app(d, &st, sizeof(st)); -+} -+ -+static void codel_reset(struct Qdisc *sch) -+{ -+ struct codel_sched_data *q = qdisc_priv(sch); -+ -+ qdisc_reset_queue(sch); -+ codel_vars_init(&q->vars); -+} -+ -+static struct Qdisc_ops codel_qdisc_ops __read_mostly = { -+ .id = "codel", -+ .priv_size = sizeof(struct codel_sched_data), -+ -+ .enqueue = codel_qdisc_enqueue, -+ .dequeue = codel_qdisc_dequeue, -+ .peek = qdisc_peek_dequeued, -+ .init = codel_init, -+ .reset = codel_reset, -+ .change = codel_change, -+ .dump = codel_dump, -+ .dump_stats = codel_dump_stats, -+ .owner = THIS_MODULE, -+}; -+ -+static int __init codel_module_init(void) -+{ -+ return register_qdisc(&codel_qdisc_ops); -+} -+ -+static void __exit codel_module_exit(void) -+{ -+ unregister_qdisc(&codel_qdisc_ops); -+} -+ -+module_init(codel_module_init) -+module_exit(codel_module_exit) -+ -+MODULE_DESCRIPTION("Controlled Delay queue discipline"); -+MODULE_AUTHOR("Dave Taht"); -+MODULE_AUTHOR("Eric Dumazet"); -+MODULE_LICENSE("Dual BSD/GPL"); diff --git a/target/linux/generic/patches-3.3/041-codel-use-Newton-method-instead-of-sqrt-and-divides.patch b/target/linux/generic/patches-3.3/041-codel-use-Newton-method-instead-of-sqrt-and-divides.patch deleted file mode 100644 index f91b42eda2..0000000000 --- a/target/linux/generic/patches-3.3/041-codel-use-Newton-method-instead-of-sqrt-and-divides.patch +++ /dev/null @@ -1,185 +0,0 @@ -From 4a8056dfeef49b306ad6af24a5563d7d6867aae0 Mon Sep 17 00:00:00 2001 -From: Eric Dumazet -Date: Sat, 12 May 2012 03:32:13 +0000 -Subject: [PATCH] codel: use Newton method instead of sqrt() and divides - -commit 536edd67109df5e0cdb2c4ee759e9bade7976367 upstream. - -As Van pointed out, interval/sqrt(count) can be implemented using -multiplies only. - -http://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Iterative_methods_for_reciprocal_square_roots - -This patch implements the Newton method and reciprocal divide. - -Total cost is 15 cycles instead of 120 on my Corei5 machine (64bit -kernel). - -There is a small 'error' for count values < 5, but we don't really care. - -I reuse a hole in struct codel_vars : - - pack the dropping boolean into one bit - - use 31bit to store the reciprocal value of sqrt(count). - -Suggested-by: Van Jacobson -Signed-off-by: Eric Dumazet -Cc: Dave Taht -Cc: Kathleen Nichols -Cc: Tom Herbert -Cc: Matt Mathis -Cc: Yuchung Cheng -Cc: Nandita Dukkipati -Cc: Stephen Hemminger -Signed-off-by: David S. Miller ---- - include/net/codel.h | 68 ++++++++++++++++++++++++++++----------------------- - 1 file changed, 37 insertions(+), 31 deletions(-) - ---- a/include/net/codel.h -+++ b/include/net/codel.h -@@ -46,6 +46,7 @@ - #include - #include - #include -+#include - - /* Controlling Queue Delay (CoDel) algorithm - * ========================================= -@@ -123,6 +124,7 @@ struct codel_params { - * entered dropping state - * @lastcount: count at entry to dropping state - * @dropping: set to true if in dropping state -+ * @rec_inv_sqrt: reciprocal value of sqrt(count) >> 1 - * @first_above_time: when we went (or will go) continuously above target - * for interval - * @drop_next: time to drop next packet, or when we dropped last -@@ -131,7 +133,8 @@ struct codel_params { - struct codel_vars { - u32 count; - u32 lastcount; -- bool dropping; -+ bool dropping:1; -+ u32 rec_inv_sqrt:31; - codel_time_t first_above_time; - codel_time_t drop_next; - codel_time_t ldelay; -@@ -158,11 +161,7 @@ static void codel_params_init(struct cod - - static void codel_vars_init(struct codel_vars *vars) - { -- vars->drop_next = 0; -- vars->first_above_time = 0; -- vars->dropping = false; /* exit dropping state */ -- vars->count = 0; -- vars->lastcount = 0; -+ memset(vars, 0, sizeof(*vars)); - } - - static void codel_stats_init(struct codel_stats *stats) -@@ -170,38 +169,37 @@ static void codel_stats_init(struct code - stats->maxpacket = 256; - } - --/* return interval/sqrt(x) with good precision -- * relies on int_sqrt(unsigned long x) kernel implementation -+/* -+ * http://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Iterative_methods_for_reciprocal_square_roots -+ * new_invsqrt = (invsqrt / 2) * (3 - count * invsqrt^2) -+ * -+ * Here, invsqrt is a fixed point number (< 1.0), 31bit mantissa) - */ --static u32 codel_inv_sqrt(u32 _interval, u32 _x) -+static void codel_Newton_step(struct codel_vars *vars) - { -- u64 interval = _interval; -- unsigned long x = _x; -- -- /* Scale operands for max precision */ -+ u32 invsqrt = vars->rec_inv_sqrt; -+ u32 invsqrt2 = ((u64)invsqrt * invsqrt) >> 31; -+ u64 val = (3LL << 31) - ((u64)vars->count * invsqrt2); - --#if BITS_PER_LONG == 64 -- x <<= 32; /* On 64bit arches, we can prescale x by 32bits */ -- interval <<= 16; --#endif -+ val = (val * invsqrt) >> 32; - -- while (x < (1UL << (BITS_PER_LONG - 2))) { -- x <<= 2; -- interval <<= 1; -- } -- do_div(interval, int_sqrt(x)); -- return (u32)interval; -+ vars->rec_inv_sqrt = val; - } - -+/* -+ * CoDel control_law is t + interval/sqrt(count) -+ * We maintain in rec_inv_sqrt the reciprocal value of sqrt(count) to avoid -+ * both sqrt() and divide operation. -+ */ - static codel_time_t codel_control_law(codel_time_t t, - codel_time_t interval, -- u32 count) -+ u32 rec_inv_sqrt) - { -- return t + codel_inv_sqrt(interval, count); -+ return t + reciprocal_divide(interval, rec_inv_sqrt << 1); - } - - --static bool codel_should_drop(struct sk_buff *skb, -+static bool codel_should_drop(const struct sk_buff *skb, - unsigned int *backlog, - struct codel_vars *vars, - struct codel_params *params, -@@ -274,14 +272,16 @@ static struct sk_buff *codel_dequeue(str - */ - while (vars->dropping && - codel_time_after_eq(now, vars->drop_next)) { -- if (++vars->count == 0) /* avoid zero divides */ -- vars->count = ~0U; -+ vars->count++; /* dont care of possible wrap -+ * since there is no more divide -+ */ -+ codel_Newton_step(vars); - if (params->ecn && INET_ECN_set_ce(skb)) { - stats->ecn_mark++; - vars->drop_next = - codel_control_law(vars->drop_next, - params->interval, -- vars->count); -+ vars->rec_inv_sqrt); - goto end; - } - qdisc_drop(skb, sch); -@@ -296,7 +296,7 @@ static struct sk_buff *codel_dequeue(str - vars->drop_next = - codel_control_law(vars->drop_next, - params->interval, -- vars->count); -+ vars->rec_inv_sqrt); - } - } - } -@@ -319,12 +319,18 @@ static struct sk_buff *codel_dequeue(str - if (codel_time_before(now - vars->drop_next, - 16 * params->interval)) { - vars->count = (vars->count - vars->lastcount) | 1; -+ /* we dont care if rec_inv_sqrt approximation -+ * is not very precise : -+ * Next Newton steps will correct it quadratically. -+ */ -+ codel_Newton_step(vars); - } else { - vars->count = 1; -+ vars->rec_inv_sqrt = 0x7fffffff; - } - vars->lastcount = vars->count; - vars->drop_next = codel_control_law(now, params->interval, -- vars->count); -+ vars->rec_inv_sqrt); - } - end: - return skb; diff --git a/target/linux/generic/patches-3.3/042-fq_codel-Fair-Queue-Codel-AQM.patch b/target/linux/generic/patches-3.3/042-fq_codel-Fair-Queue-Codel-AQM.patch deleted file mode 100644 index 26bbbcb494..0000000000 --- a/target/linux/generic/patches-3.3/042-fq_codel-Fair-Queue-Codel-AQM.patch +++ /dev/null @@ -1,839 +0,0 @@ -From f8cf19c19528a468cc0b9846c0328a94cccdc605 Mon Sep 17 00:00:00 2001 -From: Eric Dumazet -Date: Fri, 11 May 2012 09:30:50 +0000 -Subject: [PATCH] fq_codel: Fair Queue Codel AQM - -commit 4b549a2ef4bef9965d97cbd992ba67930cd3e0fe upstream. - -Fair Queue Codel packet scheduler - -Principles : - -- Packets are classified (internal classifier or external) on flows. -- This is a Stochastic model (as we use a hash, several flows might - be hashed on same slot) -- Each flow has a CoDel managed queue. -- Flows are linked onto two (Round Robin) lists, - so that new flows have priority on old ones. - -- For a given flow, packets are not reordered (CoDel uses a FIFO) -- head drops only. -- ECN capability is on by default. -- Very low memory footprint (64 bytes per flow) - -tc qdisc ... fq_codel [ limit PACKETS ] [ flows number ] - [ target TIME ] [ interval TIME ] [ noecn ] - [ quantum BYTES ] - -defaults : 1024 flows, 10240 packets limit, quantum : device MTU - target : 5ms (CoDel default) - interval : 100ms (CoDel default) - -Impressive results on load : - -class htb 1:1 root leaf 10: prio 0 quantum 1514 rate 200000Kbit ceil 200000Kbit burst 1475b/8 mpu 0b overhead 0b cburst 1475b/8 mpu 0b overhead 0b level 0 - Sent 43304920109 bytes 33063109 pkt (dropped 0, overlimits 0 requeues 0) - rate 201691Kbit 28595pps backlog 0b 312p requeues 0 - lended: 33063109 borrowed: 0 giants: 0 - tokens: -912 ctokens: -912 - -class fq_codel 10:1735 parent 10: - (dropped 1292, overlimits 0 requeues 0) - backlog 15140b 10p requeues 0 - deficit 1514 count 1 lastcount 1 ldelay 7.1ms -class fq_codel 10:4524 parent 10: - (dropped 1291, overlimits 0 requeues 0) - backlog 16654b 11p requeues 0 - deficit 1514 count 1 lastcount 1 ldelay 7.1ms -class fq_codel 10:4e74 parent 10: - (dropped 1290, overlimits 0 requeues 0) - backlog 6056b 4p requeues 0 - deficit 1514 count 1 lastcount 1 ldelay 6.4ms dropping drop_next 92.0ms -class fq_codel 10:628a parent 10: - (dropped 1289, overlimits 0 requeues 0) - backlog 7570b 5p requeues 0 - deficit 1514 count 1 lastcount 1 ldelay 5.4ms dropping drop_next 90.9ms -class fq_codel 10:a4b3 parent 10: - (dropped 302, overlimits 0 requeues 0) - backlog 16654b 11p requeues 0 - deficit 1514 count 1 lastcount 1 ldelay 7.1ms -class fq_codel 10:c3c2 parent 10: - (dropped 1284, overlimits 0 requeues 0) - backlog 13626b 9p requeues 0 - deficit 1514 count 1 lastcount 1 ldelay 5.9ms -class fq_codel 10:d331 parent 10: - (dropped 299, overlimits 0 requeues 0) - backlog 15140b 10p requeues 0 - deficit 1514 count 1 lastcount 1 ldelay 7.0ms -class fq_codel 10:d526 parent 10: - (dropped 12160, overlimits 0 requeues 0) - backlog 35870b 211p requeues 0 - deficit 1508 count 12160 lastcount 1 ldelay 15.3ms dropping drop_next 247us -class fq_codel 10:e2c6 parent 10: - (dropped 1288, overlimits 0 requeues 0) - backlog 15140b 10p requeues 0 - deficit 1514 count 1 lastcount 1 ldelay 7.1ms -class fq_codel 10:eab5 parent 10: - (dropped 1285, overlimits 0 requeues 0) - backlog 16654b 11p requeues 0 - deficit 1514 count 1 lastcount 1 ldelay 5.9ms -class fq_codel 10:f220 parent 10: - (dropped 1289, overlimits 0 requeues 0) - backlog 15140b 10p requeues 0 - deficit 1514 count 1 lastcount 1 ldelay 7.1ms - -qdisc htb 1: root refcnt 6 r2q 10 default 1 direct_packets_stat 0 ver 3.17 - Sent 43331086547 bytes 33092812 pkt (dropped 0, overlimits 66063544 requeues 71) - rate 201697Kbit 28602pps backlog 0b 260p requeues 71 -qdisc fq_codel 10: parent 1:1 limit 10240p flows 65536 target 5.0ms interval 100.0ms ecn - Sent 43331086547 bytes 33092812 pkt (dropped 949359, overlimits 0 requeues 0) - rate 201697Kbit 28602pps backlog 189352b 260p requeues 0 - maxpacket 1514 drop_overlimit 0 new_flow_count 5582 ecn_mark 125593 - new_flows_len 0 old_flows_len 11 - -PING 172.30.42.18 (172.30.42.18) 56(84) bytes of data. -64 bytes from 172.30.42.18: icmp_req=1 ttl=64 time=0.227 ms -64 bytes from 172.30.42.18: icmp_req=2 ttl=64 time=0.165 ms -64 bytes from 172.30.42.18: icmp_req=3 ttl=64 time=0.166 ms -64 bytes from 172.30.42.18: icmp_req=4 ttl=64 time=0.151 ms -64 bytes from 172.30.42.18: icmp_req=5 ttl=64 time=0.164 ms -64 bytes from 172.30.42.18: icmp_req=6 ttl=64 time=0.172 ms -64 bytes from 172.30.42.18: icmp_req=7 ttl=64 time=0.175 ms -64 bytes from 172.30.42.18: icmp_req=8 ttl=64 time=0.183 ms -64 bytes from 172.30.42.18: icmp_req=9 ttl=64 time=0.158 ms -64 bytes from 172.30.42.18: icmp_req=10 ttl=64 time=0.200 ms - -10 packets transmitted, 10 received, 0% packet loss, time 8999ms -rtt min/avg/max/mdev = 0.151/0.176/0.227/0.022 ms - -Much better than SFQ because of priority given to new flows, and fast -path dirtying less cache lines. - -Signed-off-by: Eric Dumazet -Signed-off-by: David S. Miller ---- - include/linux/pkt_sched.h | 54 ++++ - net/sched/Kconfig | 11 + - net/sched/Makefile | 1 + - net/sched/sch_fq_codel.c | 624 +++++++++++++++++++++++++++++++++++++++++++++ - 4 files changed, 690 insertions(+) - create mode 100644 net/sched/sch_fq_codel.c - ---- a/include/linux/pkt_sched.h -+++ b/include/linux/pkt_sched.h -@@ -659,4 +659,58 @@ struct tc_codel_xstats { - __u32 dropping; /* are we in dropping state ? */ - }; - -+/* FQ_CODEL */ -+ -+enum { -+ TCA_FQ_CODEL_UNSPEC, -+ TCA_FQ_CODEL_TARGET, -+ TCA_FQ_CODEL_LIMIT, -+ TCA_FQ_CODEL_INTERVAL, -+ TCA_FQ_CODEL_ECN, -+ TCA_FQ_CODEL_FLOWS, -+ TCA_FQ_CODEL_QUANTUM, -+ __TCA_FQ_CODEL_MAX -+}; -+ -+#define TCA_FQ_CODEL_MAX (__TCA_FQ_CODEL_MAX - 1) -+ -+enum { -+ TCA_FQ_CODEL_XSTATS_QDISC, -+ TCA_FQ_CODEL_XSTATS_CLASS, -+}; -+ -+struct tc_fq_codel_qd_stats { -+ __u32 maxpacket; /* largest packet we've seen so far */ -+ __u32 drop_overlimit; /* number of time max qdisc -+ * packet limit was hit -+ */ -+ __u32 ecn_mark; /* number of packets we ECN marked -+ * instead of being dropped -+ */ -+ __u32 new_flow_count; /* number of time packets -+ * created a 'new flow' -+ */ -+ __u32 new_flows_len; /* count of flows in new list */ -+ __u32 old_flows_len; /* count of flows in old list */ -+}; -+ -+struct tc_fq_codel_cl_stats { -+ __s32 deficit; -+ __u32 ldelay; /* in-queue delay seen by most recently -+ * dequeued packet -+ */ -+ __u32 count; -+ __u32 lastcount; -+ __u32 dropping; -+ __s32 drop_next; -+}; -+ -+struct tc_fq_codel_xstats { -+ __u32 type; -+ union { -+ struct tc_fq_codel_qd_stats qdisc_stats; -+ struct tc_fq_codel_cl_stats class_stats; -+ }; -+}; -+ - #endif ---- a/net/sched/Kconfig -+++ b/net/sched/Kconfig -@@ -261,6 +261,17 @@ config NET_SCH_CODEL - - If unsure, say N. - -+config NET_SCH_FQ_CODEL -+ tristate "Fair Queue Controlled Delay AQM (FQ_CODEL)" -+ help -+ Say Y here if you want to use the FQ Controlled Delay (FQ_CODEL) -+ packet scheduling algorithm. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called sch_fq_codel. -+ -+ If unsure, say N. -+ - config NET_SCH_INGRESS - tristate "Ingress Qdisc" - depends on NET_CLS_ACT ---- a/net/sched/Makefile -+++ b/net/sched/Makefile -@@ -37,6 +37,7 @@ obj-$(CONFIG_NET_SCH_MQPRIO) += sch_mqpr - obj-$(CONFIG_NET_SCH_CHOKE) += sch_choke.o - obj-$(CONFIG_NET_SCH_QFQ) += sch_qfq.o - obj-$(CONFIG_NET_SCH_CODEL) += sch_codel.o -+obj-$(CONFIG_NET_SCH_FQ_CODEL) += sch_fq_codel.o - - obj-$(CONFIG_NET_CLS_U32) += cls_u32.o - obj-$(CONFIG_NET_CLS_ROUTE4) += cls_route.o ---- /dev/null -+++ b/net/sched/sch_fq_codel.c -@@ -0,0 +1,624 @@ -+/* -+ * Fair Queue CoDel discipline -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ * -+ * Copyright (C) 2012 Eric Dumazet -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* Fair Queue CoDel. -+ * -+ * Principles : -+ * Packets are classified (internal classifier or external) on flows. -+ * This is a Stochastic model (as we use a hash, several flows -+ * might be hashed on same slot) -+ * Each flow has a CoDel managed queue. -+ * Flows are linked onto two (Round Robin) lists, -+ * so that new flows have priority on old ones. -+ * -+ * For a given flow, packets are not reordered (CoDel uses a FIFO) -+ * head drops only. -+ * ECN capability is on by default. -+ * Low memory footprint (64 bytes per flow) -+ */ -+ -+struct fq_codel_flow { -+ struct sk_buff *head; -+ struct sk_buff *tail; -+ struct list_head flowchain; -+ int deficit; -+ u32 dropped; /* number of drops (or ECN marks) on this flow */ -+ struct codel_vars cvars; -+}; /* please try to keep this structure <= 64 bytes */ -+ -+struct fq_codel_sched_data { -+ struct tcf_proto *filter_list; /* optional external classifier */ -+ struct fq_codel_flow *flows; /* Flows table [flows_cnt] */ -+ u32 *backlogs; /* backlog table [flows_cnt] */ -+ u32 flows_cnt; /* number of flows */ -+ u32 perturbation; /* hash perturbation */ -+ u32 quantum; /* psched_mtu(qdisc_dev(sch)); */ -+ struct codel_params cparams; -+ struct codel_stats cstats; -+ u32 drop_overlimit; -+ u32 new_flow_count; -+ -+ struct list_head new_flows; /* list of new flows */ -+ struct list_head old_flows; /* list of old flows */ -+}; -+ -+static unsigned int fq_codel_hash(const struct fq_codel_sched_data *q, -+ const struct sk_buff *skb) -+{ -+ struct flow_keys keys; -+ unsigned int hash; -+ -+ skb_flow_dissect(skb, &keys); -+ hash = jhash_3words((__force u32)keys.dst, -+ (__force u32)keys.src ^ keys.ip_proto, -+ (__force u32)keys.ports, q->perturbation); -+ return ((u64)hash * q->flows_cnt) >> 32; -+} -+ -+static unsigned int fq_codel_classify(struct sk_buff *skb, struct Qdisc *sch, -+ int *qerr) -+{ -+ struct fq_codel_sched_data *q = qdisc_priv(sch); -+ struct tcf_result res; -+ int result; -+ -+ if (TC_H_MAJ(skb->priority) == sch->handle && -+ TC_H_MIN(skb->priority) > 0 && -+ TC_H_MIN(skb->priority) <= q->flows_cnt) -+ return TC_H_MIN(skb->priority); -+ -+ if (!q->filter_list) -+ return fq_codel_hash(q, skb) + 1; -+ -+ *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; -+ result = tc_classify(skb, q->filter_list, &res); -+ if (result >= 0) { -+#ifdef CONFIG_NET_CLS_ACT -+ switch (result) { -+ case TC_ACT_STOLEN: -+ case TC_ACT_QUEUED: -+ *qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; -+ case TC_ACT_SHOT: -+ return 0; -+ } -+#endif -+ if (TC_H_MIN(res.classid) <= q->flows_cnt) -+ return TC_H_MIN(res.classid); -+ } -+ return 0; -+} -+ -+/* helper functions : might be changed when/if skb use a standard list_head */ -+ -+/* remove one skb from head of slot queue */ -+static inline struct sk_buff *dequeue_head(struct fq_codel_flow *flow) -+{ -+ struct sk_buff *skb = flow->head; -+ -+ flow->head = skb->next; -+ skb->next = NULL; -+ return skb; -+} -+ -+/* add skb to flow queue (tail add) */ -+static inline void flow_queue_add(struct fq_codel_flow *flow, -+ struct sk_buff *skb) -+{ -+ if (flow->head == NULL) -+ flow->head = skb; -+ else -+ flow->tail->next = skb; -+ flow->tail = skb; -+ skb->next = NULL; -+} -+ -+static unsigned int fq_codel_drop(struct Qdisc *sch) -+{ -+ struct fq_codel_sched_data *q = qdisc_priv(sch); -+ struct sk_buff *skb; -+ unsigned int maxbacklog = 0, idx = 0, i, len; -+ struct fq_codel_flow *flow; -+ -+ /* Queue is full! Find the fat flow and drop packet from it. -+ * This might sound expensive, but with 1024 flows, we scan -+ * 4KB of memory, and we dont need to handle a complex tree -+ * in fast path (packet queue/enqueue) with many cache misses. -+ */ -+ for (i = 0; i < q->flows_cnt; i++) { -+ if (q->backlogs[i] > maxbacklog) { -+ maxbacklog = q->backlogs[i]; -+ idx = i; -+ } -+ } -+ flow = &q->flows[idx]; -+ skb = dequeue_head(flow); -+ len = qdisc_pkt_len(skb); -+ q->backlogs[idx] -= len; -+ kfree_skb(skb); -+ sch->q.qlen--; -+ sch->qstats.drops++; -+ sch->qstats.backlog -= len; -+ flow->dropped++; -+ return idx; -+} -+ -+static int fq_codel_enqueue(struct sk_buff *skb, struct Qdisc *sch) -+{ -+ struct fq_codel_sched_data *q = qdisc_priv(sch); -+ unsigned int idx; -+ struct fq_codel_flow *flow; -+ int uninitialized_var(ret); -+ -+ idx = fq_codel_classify(skb, sch, &ret); -+ if (idx == 0) { -+ if (ret & __NET_XMIT_BYPASS) -+ sch->qstats.drops++; -+ kfree_skb(skb); -+ return ret; -+ } -+ idx--; -+ -+ codel_set_enqueue_time(skb); -+ flow = &q->flows[idx]; -+ flow_queue_add(flow, skb); -+ q->backlogs[idx] += qdisc_pkt_len(skb); -+ sch->qstats.backlog += qdisc_pkt_len(skb); -+ -+ if (list_empty(&flow->flowchain)) { -+ list_add_tail(&flow->flowchain, &q->new_flows); -+ codel_vars_init(&flow->cvars); -+ q->new_flow_count++; -+ flow->deficit = q->quantum; -+ flow->dropped = 0; -+ } -+ if (++sch->q.qlen < sch->limit) -+ return NET_XMIT_SUCCESS; -+ -+ q->drop_overlimit++; -+ /* Return Congestion Notification only if we dropped a packet -+ * from this flow. -+ */ -+ if (fq_codel_drop(sch) == idx) -+ return NET_XMIT_CN; -+ -+ /* As we dropped a packet, better let upper stack know this */ -+ qdisc_tree_decrease_qlen(sch, 1); -+ return NET_XMIT_SUCCESS; -+} -+ -+/* This is the specific function called from codel_dequeue() -+ * to dequeue a packet from queue. Note: backlog is handled in -+ * codel, we dont need to reduce it here. -+ */ -+static struct sk_buff *dequeue(struct codel_vars *vars, struct Qdisc *sch) -+{ -+ struct fq_codel_flow *flow; -+ struct sk_buff *skb = NULL; -+ -+ flow = container_of(vars, struct fq_codel_flow, cvars); -+ if (flow->head) { -+ skb = dequeue_head(flow); -+ sch->qstats.backlog -= qdisc_pkt_len(skb); -+ sch->q.qlen--; -+ } -+ return skb; -+} -+ -+static struct sk_buff *fq_codel_dequeue(struct Qdisc *sch) -+{ -+ struct fq_codel_sched_data *q = qdisc_priv(sch); -+ struct sk_buff *skb; -+ struct fq_codel_flow *flow; -+ struct list_head *head; -+ u32 prev_drop_count, prev_ecn_mark; -+ -+begin: -+ head = &q->new_flows; -+ if (list_empty(head)) { -+ head = &q->old_flows; -+ if (list_empty(head)) -+ return NULL; -+ } -+ flow = list_first_entry(head, struct fq_codel_flow, flowchain); -+ -+ if (flow->deficit <= 0) { -+ flow->deficit += q->quantum; -+ list_move_tail(&flow->flowchain, &q->old_flows); -+ goto begin; -+ } -+ -+ prev_drop_count = q->cstats.drop_count; -+ prev_ecn_mark = q->cstats.ecn_mark; -+ -+ skb = codel_dequeue(sch, &q->cparams, &flow->cvars, &q->cstats, -+ dequeue, &q->backlogs[flow - q->flows]); -+ -+ flow->dropped += q->cstats.drop_count - prev_drop_count; -+ flow->dropped += q->cstats.ecn_mark - prev_ecn_mark; -+ -+ if (!skb) { -+ /* force a pass through old_flows to prevent starvation */ -+ if ((head == &q->new_flows) && !list_empty(&q->old_flows)) -+ list_move_tail(&flow->flowchain, &q->old_flows); -+ else -+ list_del_init(&flow->flowchain); -+ goto begin; -+ } -+ qdisc_bstats_update(sch, skb); -+ flow->deficit -= qdisc_pkt_len(skb); -+ /* We cant call qdisc_tree_decrease_qlen() if our qlen is 0, -+ * or HTB crashes. Defer it for next round. -+ */ -+ if (q->cstats.drop_count && sch->q.qlen) { -+ qdisc_tree_decrease_qlen(sch, q->cstats.drop_count); -+ q->cstats.drop_count = 0; -+ } -+ return skb; -+} -+ -+static void fq_codel_reset(struct Qdisc *sch) -+{ -+ struct sk_buff *skb; -+ -+ while ((skb = fq_codel_dequeue(sch)) != NULL) -+ kfree_skb(skb); -+} -+ -+static const struct nla_policy fq_codel_policy[TCA_FQ_CODEL_MAX + 1] = { -+ [TCA_FQ_CODEL_TARGET] = { .type = NLA_U32 }, -+ [TCA_FQ_CODEL_LIMIT] = { .type = NLA_U32 }, -+ [TCA_FQ_CODEL_INTERVAL] = { .type = NLA_U32 }, -+ [TCA_FQ_CODEL_ECN] = { .type = NLA_U32 }, -+ [TCA_FQ_CODEL_FLOWS] = { .type = NLA_U32 }, -+ [TCA_FQ_CODEL_QUANTUM] = { .type = NLA_U32 }, -+}; -+ -+static int fq_codel_change(struct Qdisc *sch, struct nlattr *opt) -+{ -+ struct fq_codel_sched_data *q = qdisc_priv(sch); -+ struct nlattr *tb[TCA_FQ_CODEL_MAX + 1]; -+ int err; -+ -+ if (!opt) -+ return -EINVAL; -+ -+ err = nla_parse_nested(tb, TCA_FQ_CODEL_MAX, opt, fq_codel_policy); -+ if (err < 0) -+ return err; -+ if (tb[TCA_FQ_CODEL_FLOWS]) { -+ if (q->flows) -+ return -EINVAL; -+ q->flows_cnt = nla_get_u32(tb[TCA_FQ_CODEL_FLOWS]); -+ if (!q->flows_cnt || -+ q->flows_cnt > 65536) -+ return -EINVAL; -+ } -+ sch_tree_lock(sch); -+ -+ if (tb[TCA_FQ_CODEL_TARGET]) { -+ u64 target = nla_get_u32(tb[TCA_FQ_CODEL_TARGET]); -+ -+ q->cparams.target = (target * NSEC_PER_USEC) >> CODEL_SHIFT; -+ } -+ -+ if (tb[TCA_FQ_CODEL_INTERVAL]) { -+ u64 interval = nla_get_u32(tb[TCA_FQ_CODEL_INTERVAL]); -+ -+ q->cparams.interval = (interval * NSEC_PER_USEC) >> CODEL_SHIFT; -+ } -+ -+ if (tb[TCA_FQ_CODEL_LIMIT]) -+ sch->limit = nla_get_u32(tb[TCA_FQ_CODEL_LIMIT]); -+ -+ if (tb[TCA_FQ_CODEL_ECN]) -+ q->cparams.ecn = !!nla_get_u32(tb[TCA_FQ_CODEL_ECN]); -+ -+ if (tb[TCA_FQ_CODEL_QUANTUM]) -+ q->quantum = max(256U, nla_get_u32(tb[TCA_FQ_CODEL_QUANTUM])); -+ -+ while (sch->q.qlen > sch->limit) { -+ struct sk_buff *skb = fq_codel_dequeue(sch); -+ -+ kfree_skb(skb); -+ q->cstats.drop_count++; -+ } -+ qdisc_tree_decrease_qlen(sch, q->cstats.drop_count); -+ q->cstats.drop_count = 0; -+ -+ sch_tree_unlock(sch); -+ return 0; -+} -+ -+static void *fq_codel_zalloc(size_t sz) -+{ -+ void *ptr = kzalloc(sz, GFP_KERNEL | __GFP_NOWARN); -+ -+ if (!ptr) -+ ptr = vzalloc(sz); -+ return ptr; -+} -+ -+static void fq_codel_free(void *addr) -+{ -+ if (addr) { -+ if (is_vmalloc_addr(addr)) -+ vfree(addr); -+ else -+ kfree(addr); -+ } -+} -+ -+static void fq_codel_destroy(struct Qdisc *sch) -+{ -+ struct fq_codel_sched_data *q = qdisc_priv(sch); -+ -+ tcf_destroy_chain(&q->filter_list); -+ fq_codel_free(q->backlogs); -+ fq_codel_free(q->flows); -+} -+ -+static int fq_codel_init(struct Qdisc *sch, struct nlattr *opt) -+{ -+ struct fq_codel_sched_data *q = qdisc_priv(sch); -+ int i; -+ -+ sch->limit = 10*1024; -+ q->flows_cnt = 1024; -+ q->quantum = psched_mtu(qdisc_dev(sch)); -+ q->perturbation = net_random(); -+ INIT_LIST_HEAD(&q->new_flows); -+ INIT_LIST_HEAD(&q->old_flows); -+ codel_params_init(&q->cparams); -+ codel_stats_init(&q->cstats); -+ q->cparams.ecn = true; -+ -+ if (opt) { -+ int err = fq_codel_change(sch, opt); -+ if (err) -+ return err; -+ } -+ -+ if (!q->flows) { -+ q->flows = fq_codel_zalloc(q->flows_cnt * -+ sizeof(struct fq_codel_flow)); -+ if (!q->flows) -+ return -ENOMEM; -+ q->backlogs = fq_codel_zalloc(q->flows_cnt * sizeof(u32)); -+ if (!q->backlogs) { -+ fq_codel_free(q->flows); -+ return -ENOMEM; -+ } -+ for (i = 0; i < q->flows_cnt; i++) { -+ struct fq_codel_flow *flow = q->flows + i; -+ -+ INIT_LIST_HEAD(&flow->flowchain); -+ } -+ } -+ if (sch->limit >= 1) -+ sch->flags |= TCQ_F_CAN_BYPASS; -+ else -+ sch->flags &= ~TCQ_F_CAN_BYPASS; -+ return 0; -+} -+ -+static int fq_codel_dump(struct Qdisc *sch, struct sk_buff *skb) -+{ -+ struct fq_codel_sched_data *q = qdisc_priv(sch); -+ struct nlattr *opts; -+ -+ opts = nla_nest_start(skb, TCA_OPTIONS); -+ if (opts == NULL) -+ goto nla_put_failure; -+ -+ if (nla_put_u32(skb, TCA_FQ_CODEL_TARGET, -+ codel_time_to_us(q->cparams.target)) || -+ nla_put_u32(skb, TCA_FQ_CODEL_LIMIT, -+ sch->limit) || -+ nla_put_u32(skb, TCA_FQ_CODEL_INTERVAL, -+ codel_time_to_us(q->cparams.interval)) || -+ nla_put_u32(skb, TCA_FQ_CODEL_ECN, -+ q->cparams.ecn) || -+ nla_put_u32(skb, TCA_FQ_CODEL_QUANTUM, -+ q->quantum) || -+ nla_put_u32(skb, TCA_FQ_CODEL_FLOWS, -+ q->flows_cnt)) -+ goto nla_put_failure; -+ -+ nla_nest_end(skb, opts); -+ return skb->len; -+ -+nla_put_failure: -+ return -1; -+} -+ -+static int fq_codel_dump_stats(struct Qdisc *sch, struct gnet_dump *d) -+{ -+ struct fq_codel_sched_data *q = qdisc_priv(sch); -+ struct tc_fq_codel_xstats st = { -+ .type = TCA_FQ_CODEL_XSTATS_QDISC, -+ .qdisc_stats.maxpacket = q->cstats.maxpacket, -+ .qdisc_stats.drop_overlimit = q->drop_overlimit, -+ .qdisc_stats.ecn_mark = q->cstats.ecn_mark, -+ .qdisc_stats.new_flow_count = q->new_flow_count, -+ }; -+ struct list_head *pos; -+ -+ list_for_each(pos, &q->new_flows) -+ st.qdisc_stats.new_flows_len++; -+ -+ list_for_each(pos, &q->old_flows) -+ st.qdisc_stats.old_flows_len++; -+ -+ return gnet_stats_copy_app(d, &st, sizeof(st)); -+} -+ -+static struct Qdisc *fq_codel_leaf(struct Qdisc *sch, unsigned long arg) -+{ -+ return NULL; -+} -+ -+static unsigned long fq_codel_get(struct Qdisc *sch, u32 classid) -+{ -+ return 0; -+} -+ -+static unsigned long fq_codel_bind(struct Qdisc *sch, unsigned long parent, -+ u32 classid) -+{ -+ /* we cannot bypass queue discipline anymore */ -+ sch->flags &= ~TCQ_F_CAN_BYPASS; -+ return 0; -+} -+ -+static void fq_codel_put(struct Qdisc *q, unsigned long cl) -+{ -+} -+ -+static struct tcf_proto **fq_codel_find_tcf(struct Qdisc *sch, unsigned long cl) -+{ -+ struct fq_codel_sched_data *q = qdisc_priv(sch); -+ -+ if (cl) -+ return NULL; -+ return &q->filter_list; -+} -+ -+static int fq_codel_dump_class(struct Qdisc *sch, unsigned long cl, -+ struct sk_buff *skb, struct tcmsg *tcm) -+{ -+ tcm->tcm_handle |= TC_H_MIN(cl); -+ return 0; -+} -+ -+static int fq_codel_dump_class_stats(struct Qdisc *sch, unsigned long cl, -+ struct gnet_dump *d) -+{ -+ struct fq_codel_sched_data *q = qdisc_priv(sch); -+ u32 idx = cl - 1; -+ struct gnet_stats_queue qs = { 0 }; -+ struct tc_fq_codel_xstats xstats; -+ -+ if (idx < q->flows_cnt) { -+ const struct fq_codel_flow *flow = &q->flows[idx]; -+ const struct sk_buff *skb = flow->head; -+ -+ memset(&xstats, 0, sizeof(xstats)); -+ xstats.type = TCA_FQ_CODEL_XSTATS_CLASS; -+ xstats.class_stats.deficit = flow->deficit; -+ xstats.class_stats.ldelay = -+ codel_time_to_us(flow->cvars.ldelay); -+ xstats.class_stats.count = flow->cvars.count; -+ xstats.class_stats.lastcount = flow->cvars.lastcount; -+ xstats.class_stats.dropping = flow->cvars.dropping; -+ if (flow->cvars.dropping) { -+ codel_tdiff_t delta = flow->cvars.drop_next - -+ codel_get_time(); -+ -+ xstats.class_stats.drop_next = (delta >= 0) ? -+ codel_time_to_us(delta) : -+ -codel_time_to_us(-delta); -+ } -+ while (skb) { -+ qs.qlen++; -+ skb = skb->next; -+ } -+ qs.backlog = q->backlogs[idx]; -+ qs.drops = flow->dropped; -+ } -+ if (gnet_stats_copy_queue(d, &qs) < 0) -+ return -1; -+ if (idx < q->flows_cnt) -+ return gnet_stats_copy_app(d, &xstats, sizeof(xstats)); -+ return 0; -+} -+ -+static void fq_codel_walk(struct Qdisc *sch, struct qdisc_walker *arg) -+{ -+ struct fq_codel_sched_data *q = qdisc_priv(sch); -+ unsigned int i; -+ -+ if (arg->stop) -+ return; -+ -+ for (i = 0; i < q->flows_cnt; i++) { -+ if (list_empty(&q->flows[i].flowchain) || -+ arg->count < arg->skip) { -+ arg->count++; -+ continue; -+ } -+ if (arg->fn(sch, i + 1, arg) < 0) { -+ arg->stop = 1; -+ break; -+ } -+ arg->count++; -+ } -+} -+ -+static const struct Qdisc_class_ops fq_codel_class_ops = { -+ .leaf = fq_codel_leaf, -+ .get = fq_codel_get, -+ .put = fq_codel_put, -+ .tcf_chain = fq_codel_find_tcf, -+ .bind_tcf = fq_codel_bind, -+ .unbind_tcf = fq_codel_put, -+ .dump = fq_codel_dump_class, -+ .dump_stats = fq_codel_dump_class_stats, -+ .walk = fq_codel_walk, -+}; -+ -+static struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = { -+ .cl_ops = &fq_codel_class_ops, -+ .id = "fq_codel", -+ .priv_size = sizeof(struct fq_codel_sched_data), -+ .enqueue = fq_codel_enqueue, -+ .dequeue = fq_codel_dequeue, -+ .peek = qdisc_peek_dequeued, -+ .drop = fq_codel_drop, -+ .init = fq_codel_init, -+ .reset = fq_codel_reset, -+ .destroy = fq_codel_destroy, -+ .change = fq_codel_change, -+ .dump = fq_codel_dump, -+ .dump_stats = fq_codel_dump_stats, -+ .owner = THIS_MODULE, -+}; -+ -+static int __init fq_codel_module_init(void) -+{ -+ return register_qdisc(&fq_codel_qdisc_ops); -+} -+ -+static void __exit fq_codel_module_exit(void) -+{ -+ unregister_qdisc(&fq_codel_qdisc_ops); -+} -+ -+module_init(fq_codel_module_init) -+module_exit(fq_codel_module_exit) -+MODULE_AUTHOR("Eric Dumazet"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/generic/patches-3.3/043-net-codel-Add-missing-include-linux-prefetch.h.patch b/target/linux/generic/patches-3.3/043-net-codel-Add-missing-include-linux-prefetch.h.patch deleted file mode 100644 index 3510ee0419..0000000000 --- a/target/linux/generic/patches-3.3/043-net-codel-Add-missing-include-linux-prefetch.h.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 18c12e496ead3306de00a82d0bc73d71b34d7c24 Mon Sep 17 00:00:00 2001 -From: Geert Uytterhoeven -Date: Mon, 14 May 2012 09:47:05 +0000 -Subject: [PATCH] net/codel: Add missing #include -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -commit ce5b4b977127ee20c3f9c3fd3637cd3796f649f5 upstream. - -m68k allmodconfig: - -net/sched/sch_codel.c: In function ‘dequeue’: -net/sched/sch_codel.c:70: error: implicit declaration of function ‘prefetch’ -make[1]: *** [net/sched/sch_codel.o] Error 1 - -Signed-off-by: Geert Uytterhoeven -Acked-by: Eric Dumazet -Signed-off-by: David S. Miller ---- - net/sched/sch_codel.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/net/sched/sch_codel.c -+++ b/net/sched/sch_codel.c -@@ -46,6 +46,7 @@ - #include - #include - #include -+#include - #include - #include - diff --git a/target/linux/generic/patches-3.3/044-net-codel-fix-build-errors.patch b/target/linux/generic/patches-3.3/044-net-codel-fix-build-errors.patch deleted file mode 100644 index 219285d789..0000000000 --- a/target/linux/generic/patches-3.3/044-net-codel-fix-build-errors.patch +++ /dev/null @@ -1,51 +0,0 @@ -From b49ab5f6bb7e609190065cb9a605de809e50ab60 Mon Sep 17 00:00:00 2001 -From: Sasha Levin -Date: Mon, 14 May 2012 11:57:06 +0000 -Subject: [PATCH] net: codel: fix build errors - -commit 669d67bf777def468970f2dcba1537edf3b2d329 upstream. - -Fix the following build error: - -net/sched/sch_fq_codel.c: In function 'fq_codel_dump_stats': -net/sched/sch_fq_codel.c:464:3: error: unknown field 'qdisc_stats' specified in initializer -net/sched/sch_fq_codel.c:464:3: warning: missing braces around initializer -net/sched/sch_fq_codel.c:464:3: warning: (near initialization for 'st.') -net/sched/sch_fq_codel.c:465:3: error: unknown field 'qdisc_stats' specified in initializer -net/sched/sch_fq_codel.c:465:3: warning: excess elements in struct initializer -net/sched/sch_fq_codel.c:465:3: warning: (near initialization for 'st') -net/sched/sch_fq_codel.c:466:3: error: unknown field 'qdisc_stats' specified in initializer -net/sched/sch_fq_codel.c:466:3: warning: excess elements in struct initializer -net/sched/sch_fq_codel.c:466:3: warning: (near initialization for 'st') -net/sched/sch_fq_codel.c:467:3: error: unknown field 'qdisc_stats' specified in initializer -net/sched/sch_fq_codel.c:467:3: warning: excess elements in struct initializer -net/sched/sch_fq_codel.c:467:3: warning: (near initialization for 'st') -make[1]: *** [net/sched/sch_fq_codel.o] Error 1 - -Signed-off-by: Sasha Levin -Signed-off-by: David S. Miller ---- - net/sched/sch_fq_codel.c | 9 +++++---- - 1 file changed, 5 insertions(+), 4 deletions(-) - ---- a/net/sched/sch_fq_codel.c -+++ b/net/sched/sch_fq_codel.c -@@ -461,13 +461,14 @@ static int fq_codel_dump_stats(struct Qd - struct fq_codel_sched_data *q = qdisc_priv(sch); - struct tc_fq_codel_xstats st = { - .type = TCA_FQ_CODEL_XSTATS_QDISC, -- .qdisc_stats.maxpacket = q->cstats.maxpacket, -- .qdisc_stats.drop_overlimit = q->drop_overlimit, -- .qdisc_stats.ecn_mark = q->cstats.ecn_mark, -- .qdisc_stats.new_flow_count = q->new_flow_count, - }; - struct list_head *pos; - -+ st.qdisc_stats.maxpacket = q->cstats.maxpacket; -+ st.qdisc_stats.drop_overlimit = q->drop_overlimit; -+ st.qdisc_stats.ecn_mark = q->cstats.ecn_mark; -+ st.qdisc_stats.new_flow_count = q->new_flow_count; -+ - list_for_each(pos, &q->new_flows) - st.qdisc_stats.new_flows_len++; - diff --git a/target/linux/generic/patches-3.3/045-codel-use-u16-field-instead-of-31bits-for-rec_inv_sq.patch b/target/linux/generic/patches-3.3/045-codel-use-u16-field-instead-of-31bits-for-rec_inv_sq.patch deleted file mode 100644 index 933a3dcdaf..0000000000 --- a/target/linux/generic/patches-3.3/045-codel-use-u16-field-instead-of-31bits-for-rec_inv_sq.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 03333931c17d9c62ba4063d4e4fec1578c0729a7 Mon Sep 17 00:00:00 2001 -From: Eric Dumazet -Date: Sat, 12 May 2012 21:23:23 +0000 -Subject: [PATCH] codel: use u16 field instead of 31bits for rec_inv_sqrt - -commit 6ff272c9ad65eda219cd975b9da2dbc31cc812ee upstream. - -David pointed out gcc might generate poor code with 31bit fields. - -Using u16 is more than enough and permits a better code output. - -Also make the code intent more readable using constants, fixed point arithmetic -not being trivial for everybody. - -Suggested-by: David Miller -Signed-off-by: Eric Dumazet -Signed-off-by: David S. Miller ---- - include/net/codel.h | 25 +++++++++++++++---------- - 1 file changed, 15 insertions(+), 10 deletions(-) - ---- a/include/net/codel.h -+++ b/include/net/codel.h -@@ -133,13 +133,17 @@ struct codel_params { - struct codel_vars { - u32 count; - u32 lastcount; -- bool dropping:1; -- u32 rec_inv_sqrt:31; -+ bool dropping; -+ u16 rec_inv_sqrt; - codel_time_t first_above_time; - codel_time_t drop_next; - codel_time_t ldelay; - }; - -+#define REC_INV_SQRT_BITS (8 * sizeof(u16)) /* or sizeof_in_bits(rec_inv_sqrt) */ -+/* needed shift to get a Q0.32 number from rec_inv_sqrt */ -+#define REC_INV_SQRT_SHIFT (32 - REC_INV_SQRT_BITS) -+ - /** - * struct codel_stats - contains codel shared variables and stats - * @maxpacket: largest packet we've seen so far -@@ -173,17 +177,18 @@ static void codel_stats_init(struct code - * http://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Iterative_methods_for_reciprocal_square_roots - * new_invsqrt = (invsqrt / 2) * (3 - count * invsqrt^2) - * -- * Here, invsqrt is a fixed point number (< 1.0), 31bit mantissa) -+ * Here, invsqrt is a fixed point number (< 1.0), 32bit mantissa, aka Q0.32 - */ - static void codel_Newton_step(struct codel_vars *vars) - { -- u32 invsqrt = vars->rec_inv_sqrt; -- u32 invsqrt2 = ((u64)invsqrt * invsqrt) >> 31; -- u64 val = (3LL << 31) - ((u64)vars->count * invsqrt2); -+ u32 invsqrt = ((u32)vars->rec_inv_sqrt) << REC_INV_SQRT_SHIFT; -+ u32 invsqrt2 = ((u64)invsqrt * invsqrt) >> 32; -+ u64 val = (3LL << 32) - ((u64)vars->count * invsqrt2); - -- val = (val * invsqrt) >> 32; -+ val >>= 2; /* avoid overflow in following multiply */ -+ val = (val * invsqrt) >> (32 - 2 + 1); - -- vars->rec_inv_sqrt = val; -+ vars->rec_inv_sqrt = val >> REC_INV_SQRT_SHIFT; - } - - /* -@@ -195,7 +200,7 @@ static codel_time_t codel_control_law(co - codel_time_t interval, - u32 rec_inv_sqrt) - { -- return t + reciprocal_divide(interval, rec_inv_sqrt << 1); -+ return t + reciprocal_divide(interval, rec_inv_sqrt << REC_INV_SQRT_SHIFT); - } - - -@@ -326,7 +331,7 @@ static struct sk_buff *codel_dequeue(str - codel_Newton_step(vars); - } else { - vars->count = 1; -- vars->rec_inv_sqrt = 0x7fffffff; -+ vars->rec_inv_sqrt = ~0U >> REC_INV_SQRT_SHIFT; - } - vars->lastcount = vars->count; - vars->drop_next = codel_control_law(now, params->interval, diff --git a/target/linux/generic/patches-3.3/046-fq_codel-qdisc-backlog.patch b/target/linux/generic/patches-3.3/046-fq_codel-qdisc-backlog.patch deleted file mode 100644 index f9bcbbd08f..0000000000 --- a/target/linux/generic/patches-3.3/046-fq_codel-qdisc-backlog.patch +++ /dev/null @@ -1,132 +0,0 @@ -From 7bd90773f89001ea4960ed47676b550137f3facb Mon Sep 17 00:00:00 2001 -From: Eric Dumazet -Date: Wed, 16 May 2012 04:39:09 +0000 -Subject: [PATCH] fq_codel: should use qdisc backlog as threshold - -commit 865ec5523dadbedefbc5710a68969f686a28d928 upstream. - -codel_should_drop() logic allows a packet being not dropped if queue -size is under max packet size. - -In fq_codel, we have two possible backlogs : The qdisc global one, and -the flow local one. - -The meaningful one for codel_should_drop() should be the global backlog, -not the per flow one, so that thin flows can have a non zero drop/mark -probability. - -Signed-off-by: Eric Dumazet -Cc: Dave Taht -Cc: Kathleen Nichols -Cc: Van Jacobson -Signed-off-by: David S. Miller ---- - include/net/codel.h | 15 +++++++-------- - net/sched/sch_codel.c | 4 ++-- - net/sched/sch_fq_codel.c | 5 +++-- - 3 files changed, 12 insertions(+), 12 deletions(-) - ---- a/include/net/codel.h -+++ b/include/net/codel.h -@@ -205,7 +205,7 @@ static codel_time_t codel_control_law(co - - - static bool codel_should_drop(const struct sk_buff *skb, -- unsigned int *backlog, -+ struct Qdisc *sch, - struct codel_vars *vars, - struct codel_params *params, - struct codel_stats *stats, -@@ -219,13 +219,13 @@ static bool codel_should_drop(const stru - } - - vars->ldelay = now - codel_get_enqueue_time(skb); -- *backlog -= qdisc_pkt_len(skb); -+ sch->qstats.backlog -= qdisc_pkt_len(skb); - - if (unlikely(qdisc_pkt_len(skb) > stats->maxpacket)) - stats->maxpacket = qdisc_pkt_len(skb); - - if (codel_time_before(vars->ldelay, params->target) || -- *backlog <= stats->maxpacket) { -+ sch->qstats.backlog <= stats->maxpacket) { - /* went below - stay below for at least interval */ - vars->first_above_time = 0; - return false; -@@ -249,8 +249,7 @@ static struct sk_buff *codel_dequeue(str - struct codel_params *params, - struct codel_vars *vars, - struct codel_stats *stats, -- codel_skb_dequeue_t dequeue_func, -- u32 *backlog) -+ codel_skb_dequeue_t dequeue_func) - { - struct sk_buff *skb = dequeue_func(vars, sch); - codel_time_t now; -@@ -261,7 +260,7 @@ static struct sk_buff *codel_dequeue(str - return skb; - } - now = codel_get_time(); -- drop = codel_should_drop(skb, backlog, vars, params, stats, now); -+ drop = codel_should_drop(skb, sch, vars, params, stats, now); - if (vars->dropping) { - if (!drop) { - /* sojourn time below target - leave dropping state */ -@@ -292,7 +291,7 @@ static struct sk_buff *codel_dequeue(str - qdisc_drop(skb, sch); - stats->drop_count++; - skb = dequeue_func(vars, sch); -- if (!codel_should_drop(skb, backlog, -+ if (!codel_should_drop(skb, sch, - vars, params, stats, now)) { - /* leave dropping state */ - vars->dropping = false; -@@ -313,7 +312,7 @@ static struct sk_buff *codel_dequeue(str - stats->drop_count++; - - skb = dequeue_func(vars, sch); -- drop = codel_should_drop(skb, backlog, vars, params, -+ drop = codel_should_drop(skb, sch, vars, params, - stats, now); - } - vars->dropping = true; ---- a/net/sched/sch_codel.c -+++ b/net/sched/sch_codel.c -@@ -77,8 +77,8 @@ static struct sk_buff *codel_qdisc_deque - struct codel_sched_data *q = qdisc_priv(sch); - struct sk_buff *skb; - -- skb = codel_dequeue(sch, &q->params, &q->vars, &q->stats, -- dequeue, &sch->qstats.backlog); -+ skb = codel_dequeue(sch, &q->params, &q->vars, &q->stats, dequeue); -+ - /* We cant call qdisc_tree_decrease_qlen() if our qlen is 0, - * or HTB crashes. Defer it for next round. - */ ---- a/net/sched/sch_fq_codel.c -+++ b/net/sched/sch_fq_codel.c -@@ -217,13 +217,14 @@ static int fq_codel_enqueue(struct sk_bu - */ - static struct sk_buff *dequeue(struct codel_vars *vars, struct Qdisc *sch) - { -+ struct fq_codel_sched_data *q = qdisc_priv(sch); - struct fq_codel_flow *flow; - struct sk_buff *skb = NULL; - - flow = container_of(vars, struct fq_codel_flow, cvars); - if (flow->head) { - skb = dequeue_head(flow); -- sch->qstats.backlog -= qdisc_pkt_len(skb); -+ q->backlogs[flow - q->flows] -= qdisc_pkt_len(skb); - sch->q.qlen--; - } - return skb; -@@ -256,7 +257,7 @@ begin: - prev_ecn_mark = q->cstats.ecn_mark; - - skb = codel_dequeue(sch, &q->cparams, &flow->cvars, &q->cstats, -- dequeue, &q->backlogs[flow - q->flows]); -+ dequeue); - - flow->dropped += q->cstats.drop_count - prev_drop_count; - flow->dropped += q->cstats.ecn_mark - prev_ecn_mark; diff --git a/target/linux/generic/patches-3.3/047-spi_message_queue.patch b/target/linux/generic/patches-3.3/047-spi_message_queue.patch deleted file mode 100644 index 9aff0be2a3..0000000000 --- a/target/linux/generic/patches-3.3/047-spi_message_queue.patch +++ /dev/null @@ -1,603 +0,0 @@ -commit ffbbdd21329f3e15eeca6df2d4bc11c04d9d91c0 -Author: Linus Walleij -Date: Wed Feb 22 10:05:38 2012 +0100 - - spi: create a message queueing infrastructure - - This rips the message queue in the PL022 driver out and pushes - it into (optional) common infrastructure. Drivers that want to - use the message pumping thread will need to define the new - per-messags transfer methods and leave the deprecated transfer() - method as NULL. - - Most of the design is described in the documentation changes that - are included in this patch. - - Since there is a queue that need to be stopped when the system - is suspending/resuming, two new calls are implemented for the - device drivers to call in their suspend()/resume() functions: - spi_master_suspend() and spi_master_resume(). - - ChangeLog v1->v2: - - Remove Kconfig entry and do not make the queue support optional - at all, instead be more agressive and have it as part of the - compulsory infrastructure. - - If the .transfer() method is implemented, delete print a small - deprecation notice and do not start the transfer pump. - - Fix a bitrotted comment. - ChangeLog v2->v3: - - Fix up a problematic sequence courtesy of Chris Blair. - - Stop rather than destroy the queue on suspend() courtesy of - Chris Blair. - - Signed-off-by: Chris Blair - Signed-off-by: Linus Walleij - Tested-by: Mark Brown - Reviewed-by: Mark Brown - Signed-off-by: Grant Likely - -[Florian: dropped the changes on drivers/spi/spi-pl022.c, removed -the dev_info() about unqueued drivers still using the master function] - ---- a/Documentation/spi/spi-summary -+++ b/Documentation/spi/spi-summary -@@ -1,7 +1,7 @@ - Overview of Linux kernel SPI support - ==================================== - --21-May-2007 -+02-Feb-2012 - - What is SPI? - ------------ -@@ -483,9 +483,9 @@ also initialize its own internal state. - and those methods.) - - After you initialize the spi_master, then use spi_register_master() to --publish it to the rest of the system. At that time, device nodes for --the controller and any predeclared spi devices will be made available, --and the driver model core will take care of binding them to drivers. -+publish it to the rest of the system. At that time, device nodes for the -+controller and any predeclared spi devices will be made available, and -+the driver model core will take care of binding them to drivers. - - If you need to remove your SPI controller driver, spi_unregister_master() - will reverse the effect of spi_register_master(). -@@ -521,21 +521,53 @@ SPI MASTER METHODS - ** When you code setup(), ASSUME that the controller - ** is actively processing transfers for another device. - -- master->transfer(struct spi_device *spi, struct spi_message *message) -- This must not sleep. Its responsibility is arrange that the -- transfer happens and its complete() callback is issued. The two -- will normally happen later, after other transfers complete, and -- if the controller is idle it will need to be kickstarted. -- - master->cleanup(struct spi_device *spi) - Your controller driver may use spi_device.controller_state to hold - state it dynamically associates with that device. If you do that, - be sure to provide the cleanup() method to free that state. - -+ master->prepare_transfer_hardware(struct spi_master *master) -+ This will be called by the queue mechanism to signal to the driver -+ that a message is coming in soon, so the subsystem requests the -+ driver to prepare the transfer hardware by issuing this call. -+ This may sleep. -+ -+ master->unprepare_transfer_hardware(struct spi_master *master) -+ This will be called by the queue mechanism to signal to the driver -+ that there are no more messages pending in the queue and it may -+ relax the hardware (e.g. by power management calls). This may sleep. -+ -+ master->transfer_one_message(struct spi_master *master, -+ struct spi_message *mesg) -+ The subsystem calls the driver to transfer a single message while -+ queuing transfers that arrive in the meantime. When the driver is -+ finished with this message, it must call -+ spi_finalize_current_message() so the subsystem can issue the next -+ transfer. This may sleep. -+ -+ DEPRECATED METHODS -+ -+ master->transfer(struct spi_device *spi, struct spi_message *message) -+ This must not sleep. Its responsibility is arrange that the -+ transfer happens and its complete() callback is issued. The two -+ will normally happen later, after other transfers complete, and -+ if the controller is idle it will need to be kickstarted. This -+ method is not used on queued controllers and must be NULL if -+ transfer_one_message() and (un)prepare_transfer_hardware() are -+ implemented. -+ - - SPI MESSAGE QUEUE - --The bulk of the driver will be managing the I/O queue fed by transfer(). -+If you are happy with the standard queueing mechanism provided by the -+SPI subsystem, just implement the queued methods specified above. Using -+the message queue has the upside of centralizing a lot of code and -+providing pure process-context execution of methods. The message queue -+can also be elevated to realtime priority on high-priority SPI traffic. -+ -+Unless the queueing mechanism in the SPI subsystem is selected, the bulk -+of the driver will be managing the I/O queue fed by the now deprecated -+function transfer(). - - That queue could be purely conceptual. For example, a driver used only - for low-frequency sensor access might be fine using synchronous PIO. -@@ -561,4 +593,6 @@ Stephen Street - Mark Underwood - Andrew Victor - Vitaly Wool -- -+Grant Likely -+Mark Brown -+Linus Walleij ---- a/drivers/spi/spi.c -+++ b/drivers/spi/spi.c -@@ -30,6 +30,9 @@ - #include - #include - #include -+#include -+#include -+#include - - static void spidev_release(struct device *dev) - { -@@ -507,6 +510,293 @@ spi_register_board_info(struct spi_board - - /*-------------------------------------------------------------------------*/ - -+/** -+ * spi_pump_messages - kthread work function which processes spi message queue -+ * @work: pointer to kthread work struct contained in the master struct -+ * -+ * This function checks if there is any spi message in the queue that -+ * needs processing and if so call out to the driver to initialize hardware -+ * and transfer each message. -+ * -+ */ -+static void spi_pump_messages(struct kthread_work *work) -+{ -+ struct spi_master *master = -+ container_of(work, struct spi_master, pump_messages); -+ unsigned long flags; -+ bool was_busy = false; -+ int ret; -+ -+ /* Lock queue and check for queue work */ -+ spin_lock_irqsave(&master->queue_lock, flags); -+ if (list_empty(&master->queue) || !master->running) { -+ if (master->busy) { -+ ret = master->unprepare_transfer_hardware(master); -+ if (ret) { -+ dev_err(&master->dev, -+ "failed to unprepare transfer hardware\n"); -+ return; -+ } -+ } -+ master->busy = false; -+ spin_unlock_irqrestore(&master->queue_lock, flags); -+ return; -+ } -+ -+ /* Make sure we are not already running a message */ -+ if (master->cur_msg) { -+ spin_unlock_irqrestore(&master->queue_lock, flags); -+ return; -+ } -+ /* Extract head of queue */ -+ master->cur_msg = -+ list_entry(master->queue.next, struct spi_message, queue); -+ -+ list_del_init(&master->cur_msg->queue); -+ if (master->busy) -+ was_busy = true; -+ else -+ master->busy = true; -+ spin_unlock_irqrestore(&master->queue_lock, flags); -+ -+ if (!was_busy) { -+ ret = master->prepare_transfer_hardware(master); -+ if (ret) { -+ dev_err(&master->dev, -+ "failed to prepare transfer hardware\n"); -+ return; -+ } -+ } -+ -+ ret = master->transfer_one_message(master, master->cur_msg); -+ if (ret) { -+ dev_err(&master->dev, -+ "failed to transfer one message from queue\n"); -+ return; -+ } -+} -+ -+static int spi_init_queue(struct spi_master *master) -+{ -+ struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 }; -+ -+ INIT_LIST_HEAD(&master->queue); -+ spin_lock_init(&master->queue_lock); -+ -+ master->running = false; -+ master->busy = false; -+ -+ init_kthread_worker(&master->kworker); -+ master->kworker_task = kthread_run(kthread_worker_fn, -+ &master->kworker, -+ dev_name(&master->dev)); -+ if (IS_ERR(master->kworker_task)) { -+ dev_err(&master->dev, "failed to create message pump task\n"); -+ return -ENOMEM; -+ } -+ init_kthread_work(&master->pump_messages, spi_pump_messages); -+ -+ /* -+ * Master config will indicate if this controller should run the -+ * message pump with high (realtime) priority to reduce the transfer -+ * latency on the bus by minimising the delay between a transfer -+ * request and the scheduling of the message pump thread. Without this -+ * setting the message pump thread will remain at default priority. -+ */ -+ if (master->rt) { -+ dev_info(&master->dev, -+ "will run message pump with realtime priority\n"); -+ sched_setscheduler(master->kworker_task, SCHED_FIFO, ¶m); -+ } -+ -+ return 0; -+} -+ -+/** -+ * spi_get_next_queued_message() - called by driver to check for queued -+ * messages -+ * @master: the master to check for queued messages -+ * -+ * If there are more messages in the queue, the next message is returned from -+ * this call. -+ */ -+struct spi_message *spi_get_next_queued_message(struct spi_master *master) -+{ -+ struct spi_message *next; -+ unsigned long flags; -+ -+ /* get a pointer to the next message, if any */ -+ spin_lock_irqsave(&master->queue_lock, flags); -+ if (list_empty(&master->queue)) -+ next = NULL; -+ else -+ next = list_entry(master->queue.next, -+ struct spi_message, queue); -+ spin_unlock_irqrestore(&master->queue_lock, flags); -+ -+ return next; -+} -+EXPORT_SYMBOL_GPL(spi_get_next_queued_message); -+ -+/** -+ * spi_finalize_current_message() - the current message is complete -+ * @master: the master to return the message to -+ * -+ * Called by the driver to notify the core that the message in the front of the -+ * queue is complete and can be removed from the queue. -+ */ -+void spi_finalize_current_message(struct spi_master *master) -+{ -+ struct spi_message *mesg; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&master->queue_lock, flags); -+ mesg = master->cur_msg; -+ master->cur_msg = NULL; -+ -+ queue_kthread_work(&master->kworker, &master->pump_messages); -+ spin_unlock_irqrestore(&master->queue_lock, flags); -+ -+ mesg->state = NULL; -+ if (mesg->complete) -+ mesg->complete(mesg->context); -+} -+EXPORT_SYMBOL_GPL(spi_finalize_current_message); -+ -+static int spi_start_queue(struct spi_master *master) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&master->queue_lock, flags); -+ -+ if (master->running || master->busy) { -+ spin_unlock_irqrestore(&master->queue_lock, flags); -+ return -EBUSY; -+ } -+ -+ master->running = true; -+ master->cur_msg = NULL; -+ spin_unlock_irqrestore(&master->queue_lock, flags); -+ -+ queue_kthread_work(&master->kworker, &master->pump_messages); -+ -+ return 0; -+} -+ -+static int spi_stop_queue(struct spi_master *master) -+{ -+ unsigned long flags; -+ unsigned limit = 500; -+ int ret = 0; -+ -+ spin_lock_irqsave(&master->queue_lock, flags); -+ -+ /* -+ * This is a bit lame, but is optimized for the common execution path. -+ * A wait_queue on the master->busy could be used, but then the common -+ * execution path (pump_messages) would be required to call wake_up or -+ * friends on every SPI message. Do this instead. -+ */ -+ while ((!list_empty(&master->queue) || master->busy) && limit--) { -+ spin_unlock_irqrestore(&master->queue_lock, flags); -+ msleep(10); -+ spin_lock_irqsave(&master->queue_lock, flags); -+ } -+ -+ if (!list_empty(&master->queue) || master->busy) -+ ret = -EBUSY; -+ else -+ master->running = false; -+ -+ spin_unlock_irqrestore(&master->queue_lock, flags); -+ -+ if (ret) { -+ dev_warn(&master->dev, -+ "could not stop message queue\n"); -+ return ret; -+ } -+ return ret; -+} -+ -+static int spi_destroy_queue(struct spi_master *master) -+{ -+ int ret; -+ -+ ret = spi_stop_queue(master); -+ -+ /* -+ * flush_kthread_worker will block until all work is done. -+ * If the reason that stop_queue timed out is that the work will never -+ * finish, then it does no good to call flush/stop thread, so -+ * return anyway. -+ */ -+ if (ret) { -+ dev_err(&master->dev, "problem destroying queue\n"); -+ return ret; -+ } -+ -+ flush_kthread_worker(&master->kworker); -+ kthread_stop(master->kworker_task); -+ -+ return 0; -+} -+ -+/** -+ * spi_queued_transfer - transfer function for queued transfers -+ * @spi: spi device which is requesting transfer -+ * @msg: spi message which is to handled is queued to driver queue -+ */ -+static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg) -+{ -+ struct spi_master *master = spi->master; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&master->queue_lock, flags); -+ -+ if (!master->running) { -+ spin_unlock_irqrestore(&master->queue_lock, flags); -+ return -ESHUTDOWN; -+ } -+ msg->actual_length = 0; -+ msg->status = -EINPROGRESS; -+ -+ list_add_tail(&msg->queue, &master->queue); -+ if (master->running && !master->busy) -+ queue_kthread_work(&master->kworker, &master->pump_messages); -+ -+ spin_unlock_irqrestore(&master->queue_lock, flags); -+ return 0; -+} -+ -+static int spi_master_initialize_queue(struct spi_master *master) -+{ -+ int ret; -+ -+ master->queued = true; -+ master->transfer = spi_queued_transfer; -+ -+ /* Initialize and start queue */ -+ ret = spi_init_queue(master); -+ if (ret) { -+ dev_err(&master->dev, "problem initializing queue\n"); -+ goto err_init_queue; -+ } -+ ret = spi_start_queue(master); -+ if (ret) { -+ dev_err(&master->dev, "problem starting queue\n"); -+ goto err_start_queue; -+ } -+ -+ return 0; -+ -+err_start_queue: -+err_init_queue: -+ spi_destroy_queue(master); -+ return ret; -+} -+ -+/*-------------------------------------------------------------------------*/ -+ - static void spi_master_release(struct device *dev) - { - struct spi_master *master; -@@ -522,6 +812,7 @@ static struct class spi_master_class = { - }; - - -+ - /** - * spi_alloc_master - allocate SPI master controller - * @dev: the controller, possibly using the platform_bus -@@ -621,6 +912,15 @@ int spi_register_master(struct spi_maste - dev_dbg(dev, "registered master %s%s\n", dev_name(&master->dev), - dynamic ? " (dynamic)" : ""); - -+ /* If we're using a queued driver, start the queue */ -+ if (!master->transfer) { -+ status = spi_master_initialize_queue(master); -+ if (status) { -+ device_unregister(&master->dev); -+ goto done; -+ } -+ } -+ - mutex_lock(&board_lock); - list_add_tail(&master->list, &spi_master_list); - list_for_each_entry(bi, &board_list, list) -@@ -636,7 +936,6 @@ done: - } - EXPORT_SYMBOL_GPL(spi_register_master); - -- - static int __unregister(struct device *dev, void *null) - { - spi_unregister_device(to_spi_device(dev)); -@@ -657,6 +956,11 @@ void spi_unregister_master(struct spi_ma - { - int dummy; - -+ if (master->queued) { -+ if (spi_destroy_queue(master)) -+ dev_err(&master->dev, "queue remove failed\n"); -+ } -+ - mutex_lock(&board_lock); - list_del(&master->list); - mutex_unlock(&board_lock); -@@ -666,6 +970,37 @@ void spi_unregister_master(struct spi_ma - } - EXPORT_SYMBOL_GPL(spi_unregister_master); - -+int spi_master_suspend(struct spi_master *master) -+{ -+ int ret; -+ -+ /* Basically no-ops for non-queued masters */ -+ if (!master->queued) -+ return 0; -+ -+ ret = spi_stop_queue(master); -+ if (ret) -+ dev_err(&master->dev, "queue stop failed\n"); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(spi_master_suspend); -+ -+int spi_master_resume(struct spi_master *master) -+{ -+ int ret; -+ -+ if (!master->queued) -+ return 0; -+ -+ ret = spi_start_queue(master); -+ if (ret) -+ dev_err(&master->dev, "queue restart failed\n"); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(spi_master_resume); -+ - static int __spi_master_match(struct device *dev, void *data) - { - struct spi_master *m; ---- a/include/linux/spi/spi.h -+++ b/include/linux/spi/spi.h -@@ -22,6 +22,7 @@ - #include - #include - #include -+#include - - /* - * INTERFACES between SPI master-side drivers and SPI infrastructure. -@@ -235,6 +236,27 @@ static inline void spi_unregister_driver - * the device whose settings are being modified. - * @transfer: adds a message to the controller's transfer queue. - * @cleanup: frees controller-specific state -+ * @queued: whether this master is providing an internal message queue -+ * @kworker: thread struct for message pump -+ * @kworker_task: pointer to task for message pump kworker thread -+ * @pump_messages: work struct for scheduling work to the message pump -+ * @queue_lock: spinlock to syncronise access to message queue -+ * @queue: message queue -+ * @cur_msg: the currently in-flight message -+ * @busy: message pump is busy -+ * @running: message pump is running -+ * @rt: whether this queue is set to run as a realtime task -+ * @prepare_transfer_hardware: a message will soon arrive from the queue -+ * so the subsystem requests the driver to prepare the transfer hardware -+ * by issuing this call -+ * @transfer_one_message: the subsystem calls the driver to transfer a single -+ * message while queuing transfers that arrive in the meantime. When the -+ * driver is finished with this message, it must call -+ * spi_finalize_current_message() so the subsystem can issue the next -+ * transfer -+ * @prepare_transfer_hardware: there are currently no more messages on the -+ * queue so the subsystem notifies the driver that it may relax the -+ * hardware by issuing this call - * - * Each SPI master controller can communicate with one or more @spi_device - * children. These make a small bus, sharing MOSI, MISO and SCK signals -@@ -318,6 +340,28 @@ struct spi_master { - - /* called on release() to free memory provided by spi_master */ - void (*cleanup)(struct spi_device *spi); -+ -+ /* -+ * These hooks are for drivers that want to use the generic -+ * master transfer queueing mechanism. If these are used, the -+ * transfer() function above must NOT be specified by the driver. -+ * Over time we expect SPI drivers to be phased over to this API. -+ */ -+ bool queued; -+ struct kthread_worker kworker; -+ struct task_struct *kworker_task; -+ struct kthread_work pump_messages; -+ spinlock_t queue_lock; -+ struct list_head queue; -+ struct spi_message *cur_msg; -+ bool busy; -+ bool running; -+ bool rt; -+ -+ int (*prepare_transfer_hardware)(struct spi_master *master); -+ int (*transfer_one_message)(struct spi_master *master, -+ struct spi_message *mesg); -+ int (*unprepare_transfer_hardware)(struct spi_master *master); - }; - - static inline void *spi_master_get_devdata(struct spi_master *master) -@@ -343,6 +387,13 @@ static inline void spi_master_put(struct - put_device(&master->dev); - } - -+/* PM calls that need to be issued by the driver */ -+extern int spi_master_suspend(struct spi_master *master); -+extern int spi_master_resume(struct spi_master *master); -+ -+/* Calls the driver make to interact with the message queue */ -+extern struct spi_message *spi_get_next_queued_message(struct spi_master *master); -+extern void spi_finalize_current_message(struct spi_master *master); - - /* the spi driver core manages memory for the spi_master classdev */ - extern struct spi_master * diff --git a/target/linux/generic/patches-3.3/048-spi-Dont-call-prepare-unprepare-transfer-if-not-popu.patch b/target/linux/generic/patches-3.3/048-spi-Dont-call-prepare-unprepare-transfer-if-not-popu.patch deleted file mode 100644 index deef32e45b..0000000000 --- a/target/linux/generic/patches-3.3/048-spi-Dont-call-prepare-unprepare-transfer-if-not-popu.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 7dfd2bd70228d1f8d468d58cb3d12ecd618479ed Mon Sep 17 00:00:00 2001 -From: Shubhrajyoti D -Date: Thu, 10 May 2012 19:20:41 +0530 -Subject: [PATCH] spi: Dont call prepare/unprepare transfer if not populated - -Currently the prepare/unprepare transfer are called unconditionally. -The assumption is that every driver using the spi core queue infrastructure -has to populate the prepare and unprepare functions. This encourages -drivers to populate empty functions to prevent crashing. -This patch prevents the call to prepare/unprepare if not populated. - -Signed-off-by: Shubhrajyoti D -Acked-by: Linus Walleij -[grant.likely: fix whitespace defect] -Signed-off-by: Grant Likely ---- - drivers/spi/spi.c | 4 ++-- - 1 files changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/spi/spi.c -+++ b/drivers/spi/spi.c -@@ -530,7 +530,7 @@ static void spi_pump_messages(struct kth - /* Lock queue and check for queue work */ - spin_lock_irqsave(&master->queue_lock, flags); - if (list_empty(&master->queue) || !master->running) { -- if (master->busy) { -+ if (master->busy && master->unprepare_transfer_hardware) { - ret = master->unprepare_transfer_hardware(master); - if (ret) { - dev_err(&master->dev, -@@ -559,7 +559,7 @@ static void spi_pump_messages(struct kth - master->busy = true; - spin_unlock_irqrestore(&master->queue_lock, flags); - -- if (!was_busy) { -+ if (!was_busy && master->prepare_transfer_hardware) { - ret = master->prepare_transfer_hardware(master); - if (ret) { - dev_err(&master->dev, diff --git a/target/linux/generic/patches-3.3/049-codel-refine-one-condition-to-avoid-a-nul-rec_inv_sqrt.patch b/target/linux/generic/patches-3.3/049-codel-refine-one-condition-to-avoid-a-nul-rec_inv_sqrt.patch deleted file mode 100644 index bfb6ae205c..0000000000 --- a/target/linux/generic/patches-3.3/049-codel-refine-one-condition-to-avoid-a-nul-rec_inv_sqrt.patch +++ /dev/null @@ -1,52 +0,0 @@ -From b8fc328668a74e1314a19266755a54abd875e5a6 Mon Sep 17 00:00:00 2001 -From: Eric Dumazet -Date: Sun, 29 Jul 2012 20:52:21 +0000 -Subject: [PATCH] codel: refine one condition to avoid a nul rec_inv_sqrt - -commit 2359a47671fc4fb0fe5e9945f76c2cb10792c0f8 upstream. - -One condition before codel_Newton_step() was not good if -we never left the dropping state for a flow. As a result -rec_inv_sqrt was 0, instead of the ~0 initial value. - -codel control law was then set to a very aggressive mode, dropping -many packets before reaching 'target' and recovering from this problem. - -To keep codel_vars_init() as efficient as possible, refine -the condition to make sure rec_inv_sqrt initial value is correct - -Many thanks to Anton Mich for discovering the issue and suggesting -a fix. - -Reported-by: Anton Mich -Signed-off-by: Eric Dumazet -Signed-off-by: David S. Miller ---- - include/net/codel.h | 8 ++++++-- - 1 file changed, 6 insertions(+), 2 deletions(-) - ---- a/include/net/codel.h -+++ b/include/net/codel.h -@@ -305,6 +305,8 @@ static struct sk_buff *codel_dequeue(str - } - } - } else if (drop) { -+ u32 delta; -+ - if (params->ecn && INET_ECN_set_ce(skb)) { - stats->ecn_mark++; - } else { -@@ -320,9 +322,11 @@ static struct sk_buff *codel_dequeue(str - * assume that the drop rate that controlled the queue on the - * last cycle is a good starting point to control it now. - */ -- if (codel_time_before(now - vars->drop_next, -+ delta = vars->count - vars->lastcount; -+ if (delta > 1 && -+ codel_time_before(now - vars->drop_next, - 16 * params->interval)) { -- vars->count = (vars->count - vars->lastcount) | 1; -+ vars->count = delta; - /* we dont care if rec_inv_sqrt approximation - * is not very precise : - * Next Newton steps will correct it quadratically. diff --git a/target/linux/generic/patches-3.3/050-rng_git_backport.patch b/target/linux/generic/patches-3.3/050-rng_git_backport.patch deleted file mode 100644 index 825eb73a43..0000000000 --- a/target/linux/generic/patches-3.3/050-rng_git_backport.patch +++ /dev/null @@ -1,783 +0,0 @@ ---- a/drivers/char/random.c -+++ b/drivers/char/random.c -@@ -125,21 +125,26 @@ - * The current exported interfaces for gathering environmental noise - * from the devices are: - * -+ * void add_device_randomness(const void *buf, unsigned int size); - * void add_input_randomness(unsigned int type, unsigned int code, - * unsigned int value); -- * void add_interrupt_randomness(int irq); -+ * void add_interrupt_randomness(int irq, int irq_flags); - * void add_disk_randomness(struct gendisk *disk); - * - * add_input_randomness() uses the input layer interrupt timing, as well as - * the event type information from the hardware. - * -- * add_interrupt_randomness() uses the inter-interrupt timing as random -- * inputs to the entropy pool. Note that not all interrupts are good -- * sources of randomness! For example, the timer interrupts is not a -- * good choice, because the periodicity of the interrupts is too -- * regular, and hence predictable to an attacker. Network Interface -- * Controller interrupts are a better measure, since the timing of the -- * NIC interrupts are more unpredictable. -+ * add_interrupt_randomness() uses the interrupt timing as random -+ * inputs to the entropy pool. Using the cycle counters and the irq source -+ * as inputs, it feeds the randomness roughly once a second. -+ * -+ * add_device_randomness() is for adding data to the random pool that -+ * is likely to differ between two devices (or possibly even per boot). -+ * This would be things like MAC addresses or serial numbers, or the -+ * read-out of the RTC. This does *not* add any actual entropy to the -+ * pool, but it initializes the pool to different values for devices -+ * that might otherwise be identical and have very little entropy -+ * available to them (particularly common in the embedded world). - * - * add_disk_randomness() uses what amounts to the seek time of block - * layer request events, on a per-disk_devt basis, as input to the -@@ -248,6 +253,7 @@ - #include - #include - #include -+#include - - #ifdef CONFIG_GENERIC_HARDIRQS - # include -@@ -256,8 +262,12 @@ - #include - #include - #include -+#include - #include - -+#define CREATE_TRACE_POINTS -+#include -+ - /* - * Configuration information - */ -@@ -420,8 +430,10 @@ struct entropy_store { - /* read-write data: */ - spinlock_t lock; - unsigned add_ptr; -+ unsigned input_rotate; - int entropy_count; -- int input_rotate; -+ int entropy_total; -+ unsigned int initialized:1; - __u8 last_data[EXTRACT_SIZE]; - }; - -@@ -454,6 +466,10 @@ static struct entropy_store nonblocking_ - .pool = nonblocking_pool_data - }; - -+static __u32 const twist_table[8] = { -+ 0x00000000, 0x3b6e20c8, 0x76dc4190, 0x4db26158, -+ 0xedb88320, 0xd6d6a3e8, 0x9b64c2b0, 0xa00ae278 }; -+ - /* - * This function adds bytes into the entropy "pool". It does not - * update the entropy estimate. The caller should call -@@ -464,29 +480,24 @@ static struct entropy_store nonblocking_ - * it's cheap to do so and helps slightly in the expected case where - * the entropy is concentrated in the low-order bits. - */ --static void mix_pool_bytes_extract(struct entropy_store *r, const void *in, -- int nbytes, __u8 out[64]) -+static void _mix_pool_bytes(struct entropy_store *r, const void *in, -+ int nbytes, __u8 out[64]) - { -- static __u32 const twist_table[8] = { -- 0x00000000, 0x3b6e20c8, 0x76dc4190, 0x4db26158, -- 0xedb88320, 0xd6d6a3e8, 0x9b64c2b0, 0xa00ae278 }; - unsigned long i, j, tap1, tap2, tap3, tap4, tap5; - int input_rotate; - int wordmask = r->poolinfo->poolwords - 1; - const char *bytes = in; - __u32 w; -- unsigned long flags; - -- /* Taps are constant, so we can load them without holding r->lock. */ - tap1 = r->poolinfo->tap1; - tap2 = r->poolinfo->tap2; - tap3 = r->poolinfo->tap3; - tap4 = r->poolinfo->tap4; - tap5 = r->poolinfo->tap5; - -- spin_lock_irqsave(&r->lock, flags); -- input_rotate = r->input_rotate; -- i = r->add_ptr; -+ smp_rmb(); -+ input_rotate = ACCESS_ONCE(r->input_rotate); -+ i = ACCESS_ONCE(r->add_ptr); - - /* mix one byte at a time to simplify size handling and churn faster */ - while (nbytes--) { -@@ -513,19 +524,61 @@ static void mix_pool_bytes_extract(struc - input_rotate += i ? 7 : 14; - } - -- r->input_rotate = input_rotate; -- r->add_ptr = i; -+ ACCESS_ONCE(r->input_rotate) = input_rotate; -+ ACCESS_ONCE(r->add_ptr) = i; -+ smp_wmb(); - - if (out) - for (j = 0; j < 16; j++) - ((__u32 *)out)[j] = r->pool[(i - j) & wordmask]; -+} -+ -+static void __mix_pool_bytes(struct entropy_store *r, const void *in, -+ int nbytes, __u8 out[64]) -+{ -+ trace_mix_pool_bytes_nolock(r->name, nbytes, _RET_IP_); -+ _mix_pool_bytes(r, in, nbytes, out); -+} - -+static void mix_pool_bytes(struct entropy_store *r, const void *in, -+ int nbytes, __u8 out[64]) -+{ -+ unsigned long flags; -+ -+ trace_mix_pool_bytes(r->name, nbytes, _RET_IP_); -+ spin_lock_irqsave(&r->lock, flags); -+ _mix_pool_bytes(r, in, nbytes, out); - spin_unlock_irqrestore(&r->lock, flags); - } - --static void mix_pool_bytes(struct entropy_store *r, const void *in, int bytes) -+struct fast_pool { -+ __u32 pool[4]; -+ unsigned long last; -+ unsigned short count; -+ unsigned char rotate; -+ unsigned char last_timer_intr; -+}; -+ -+/* -+ * This is a fast mixing routine used by the interrupt randomness -+ * collector. It's hardcoded for an 128 bit pool and assumes that any -+ * locks that might be needed are taken by the caller. -+ */ -+static void fast_mix(struct fast_pool *f, const void *in, int nbytes) - { -- mix_pool_bytes_extract(r, in, bytes, NULL); -+ const char *bytes = in; -+ __u32 w; -+ unsigned i = f->count; -+ unsigned input_rotate = f->rotate; -+ -+ while (nbytes--) { -+ w = rol32(*bytes++, input_rotate & 31) ^ f->pool[i & 3] ^ -+ f->pool[(i + 1) & 3]; -+ f->pool[i & 3] = (w >> 3) ^ twist_table[w & 7]; -+ input_rotate += (i++ & 3) ? 7 : 14; -+ } -+ f->count = i; -+ f->rotate = input_rotate; - } - - /* -@@ -533,30 +586,38 @@ static void mix_pool_bytes(struct entrop - */ - static void credit_entropy_bits(struct entropy_store *r, int nbits) - { -- unsigned long flags; -- int entropy_count; -+ int entropy_count, orig; - - if (!nbits) - return; - -- spin_lock_irqsave(&r->lock, flags); -- - DEBUG_ENT("added %d entropy credits to %s\n", nbits, r->name); -- entropy_count = r->entropy_count; -+retry: -+ entropy_count = orig = ACCESS_ONCE(r->entropy_count); - entropy_count += nbits; -+ - if (entropy_count < 0) { - DEBUG_ENT("negative entropy/overflow\n"); - entropy_count = 0; - } else if (entropy_count > r->poolinfo->POOLBITS) - entropy_count = r->poolinfo->POOLBITS; -- r->entropy_count = entropy_count; -+ if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig) -+ goto retry; -+ -+ if (!r->initialized && nbits > 0) { -+ r->entropy_total += nbits; -+ if (r->entropy_total > 128) -+ r->initialized = 1; -+ } -+ -+ trace_credit_entropy_bits(r->name, nbits, entropy_count, -+ r->entropy_total, _RET_IP_); - - /* should we wake readers? */ - if (r == &input_pool && entropy_count >= random_read_wakeup_thresh) { - wake_up_interruptible(&random_read_wait); - kill_fasync(&fasync, SIGIO, POLL_IN); - } -- spin_unlock_irqrestore(&r->lock, flags); - } - - /********************************************************************* -@@ -609,6 +670,25 @@ static void set_timer_rand_state(unsigne - } - #endif - -+/* -+ * Add device- or boot-specific data to the input and nonblocking -+ * pools to help initialize them to unique values. -+ * -+ * None of this adds any entropy, it is meant to avoid the -+ * problem of the nonblocking pool having similar initial state -+ * across largely identical devices. -+ */ -+void add_device_randomness(const void *buf, unsigned int size) -+{ -+ unsigned long time = get_cycles() ^ jiffies; -+ -+ mix_pool_bytes(&input_pool, buf, size, NULL); -+ mix_pool_bytes(&input_pool, &time, sizeof(time), NULL); -+ mix_pool_bytes(&nonblocking_pool, buf, size, NULL); -+ mix_pool_bytes(&nonblocking_pool, &time, sizeof(time), NULL); -+} -+EXPORT_SYMBOL(add_device_randomness); -+ - static struct timer_rand_state input_timer_state; - - /* -@@ -637,13 +717,9 @@ static void add_timer_randomness(struct - goto out; - - sample.jiffies = jiffies; -- -- /* Use arch random value, fall back to cycles */ -- if (!arch_get_random_int(&sample.cycles)) -- sample.cycles = get_cycles(); -- -+ sample.cycles = get_cycles(); - sample.num = num; -- mix_pool_bytes(&input_pool, &sample, sizeof(sample)); -+ mix_pool_bytes(&input_pool, &sample, sizeof(sample), NULL); - - /* - * Calculate number of bits of randomness we probably added. -@@ -700,17 +776,48 @@ void add_input_randomness(unsigned int t - } - EXPORT_SYMBOL_GPL(add_input_randomness); - --void add_interrupt_randomness(int irq) -+static DEFINE_PER_CPU(struct fast_pool, irq_randomness); -+ -+void add_interrupt_randomness(int irq, int irq_flags) - { -- struct timer_rand_state *state; -+ struct entropy_store *r; -+ struct fast_pool *fast_pool = &__get_cpu_var(irq_randomness); -+ struct pt_regs *regs = get_irq_regs(); -+ unsigned long now = jiffies; -+ __u32 input[4], cycles = get_cycles(); -+ -+ input[0] = cycles ^ jiffies; -+ input[1] = irq; -+ if (regs) { -+ __u64 ip = instruction_pointer(regs); -+ input[2] = ip; -+ input[3] = ip >> 32; -+ } - -- state = get_timer_rand_state(irq); -+ fast_mix(fast_pool, input, sizeof(input)); - -- if (state == NULL) -+ if ((fast_pool->count & 1023) && -+ !time_after(now, fast_pool->last + HZ)) - return; - -- DEBUG_ENT("irq event %d\n", irq); -- add_timer_randomness(state, 0x100 + irq); -+ fast_pool->last = now; -+ -+ r = nonblocking_pool.initialized ? &input_pool : &nonblocking_pool; -+ __mix_pool_bytes(r, &fast_pool->pool, sizeof(fast_pool->pool), NULL); -+ /* -+ * If we don't have a valid cycle counter, and we see -+ * back-to-back timer interrupts, then skip giving credit for -+ * any entropy. -+ */ -+ if (cycles == 0) { -+ if (irq_flags & __IRQF_TIMER) { -+ if (fast_pool->last_timer_intr) -+ return; -+ fast_pool->last_timer_intr = 1; -+ } else -+ fast_pool->last_timer_intr = 0; -+ } -+ credit_entropy_bits(r, 1); - } - - #ifdef CONFIG_BLOCK -@@ -742,7 +849,11 @@ static ssize_t extract_entropy(struct en - */ - static void xfer_secondary_pool(struct entropy_store *r, size_t nbytes) - { -- __u32 tmp[OUTPUT_POOL_WORDS]; -+ union { -+ __u32 tmp[OUTPUT_POOL_WORDS]; -+ long hwrand[4]; -+ } u; -+ int i; - - if (r->pull && r->entropy_count < nbytes * 8 && - r->entropy_count < r->poolinfo->POOLBITS) { -@@ -753,17 +864,22 @@ static void xfer_secondary_pool(struct e - /* pull at least as many as BYTES as wakeup BITS */ - bytes = max_t(int, bytes, random_read_wakeup_thresh / 8); - /* but never more than the buffer size */ -- bytes = min_t(int, bytes, sizeof(tmp)); -+ bytes = min_t(int, bytes, sizeof(u.tmp)); - - DEBUG_ENT("going to reseed %s with %d bits " - "(%d of %d requested)\n", - r->name, bytes * 8, nbytes * 8, r->entropy_count); - -- bytes = extract_entropy(r->pull, tmp, bytes, -+ bytes = extract_entropy(r->pull, u.tmp, bytes, - random_read_wakeup_thresh / 8, rsvd); -- mix_pool_bytes(r, tmp, bytes); -+ mix_pool_bytes(r, u.tmp, bytes, NULL); - credit_entropy_bits(r, bytes*8); - } -+ for (i = 0; i < 4; i++) -+ if (arch_get_random_long(&u.hwrand[i])) -+ break; -+ if (i) -+ mix_pool_bytes(r, &u.hwrand, i * sizeof(u.hwrand[0]), 0); - } - - /* -@@ -822,9 +938,11 @@ static void extract_buf(struct entropy_s - int i; - __u32 hash[5], workspace[SHA_WORKSPACE_WORDS]; - __u8 extract[64]; -+ unsigned long flags; - - /* Generate a hash across the pool, 16 words (512 bits) at a time */ - sha_init(hash); -+ spin_lock_irqsave(&r->lock, flags); - for (i = 0; i < r->poolinfo->poolwords; i += 16) - sha_transform(hash, (__u8 *)(r->pool + i), workspace); - -@@ -837,7 +955,8 @@ static void extract_buf(struct entropy_s - * brute-forcing the feedback as hard as brute-forcing the - * hash. - */ -- mix_pool_bytes_extract(r, hash, sizeof(hash), extract); -+ __mix_pool_bytes(r, hash, sizeof(hash), extract); -+ spin_unlock_irqrestore(&r->lock, flags); - - /* - * To avoid duplicates, we atomically extract a portion of the -@@ -860,12 +979,12 @@ static void extract_buf(struct entropy_s - } - - static ssize_t extract_entropy(struct entropy_store *r, void *buf, -- size_t nbytes, int min, int reserved) -+ size_t nbytes, int min, int reserved) - { - ssize_t ret = 0, i; - __u8 tmp[EXTRACT_SIZE]; -- unsigned long flags; - -+ trace_extract_entropy(r->name, nbytes, r->entropy_count, _RET_IP_); - xfer_secondary_pool(r, nbytes); - nbytes = account(r, nbytes, min, reserved); - -@@ -873,6 +992,8 @@ static ssize_t extract_entropy(struct en - extract_buf(r, tmp); - - if (fips_enabled) { -+ unsigned long flags; -+ - spin_lock_irqsave(&r->lock, flags); - if (!memcmp(tmp, r->last_data, EXTRACT_SIZE)) - panic("Hardware RNG duplicated output!\n"); -@@ -898,6 +1019,7 @@ static ssize_t extract_entropy_user(stru - ssize_t ret = 0, i; - __u8 tmp[EXTRACT_SIZE]; - -+ trace_extract_entropy_user(r->name, nbytes, r->entropy_count, _RET_IP_); - xfer_secondary_pool(r, nbytes); - nbytes = account(r, nbytes, 0, 0); - -@@ -931,17 +1053,35 @@ static ssize_t extract_entropy_user(stru - - /* - * This function is the exported kernel interface. It returns some -- * number of good random numbers, suitable for seeding TCP sequence -- * numbers, etc. -+ * number of good random numbers, suitable for key generation, seeding -+ * TCP sequence numbers, etc. It does not use the hw random number -+ * generator, if available; use get_random_bytes_arch() for that. - */ - void get_random_bytes(void *buf, int nbytes) - { -+ extract_entropy(&nonblocking_pool, buf, nbytes, 0, 0); -+} -+EXPORT_SYMBOL(get_random_bytes); -+ -+/* -+ * This function will use the architecture-specific hardware random -+ * number generator if it is available. The arch-specific hw RNG will -+ * almost certainly be faster than what we can do in software, but it -+ * is impossible to verify that it is implemented securely (as -+ * opposed, to, say, the AES encryption of a sequence number using a -+ * key known by the NSA). So it's useful if we need the speed, but -+ * only if we're willing to trust the hardware manufacturer not to -+ * have put in a back door. -+ */ -+void get_random_bytes_arch(void *buf, int nbytes) -+{ - char *p = buf; - -+ trace_get_random_bytes(nbytes, _RET_IP_); - while (nbytes) { - unsigned long v; - int chunk = min(nbytes, (int)sizeof(unsigned long)); -- -+ - if (!arch_get_random_long(&v)) - break; - -@@ -950,9 +1090,11 @@ void get_random_bytes(void *buf, int nby - nbytes -= chunk; - } - -- extract_entropy(&nonblocking_pool, p, nbytes, 0, 0); -+ if (nbytes) -+ extract_entropy(&nonblocking_pool, p, nbytes, 0, 0); - } --EXPORT_SYMBOL(get_random_bytes); -+EXPORT_SYMBOL(get_random_bytes_arch); -+ - - /* - * init_std_data - initialize pool with system data -@@ -966,21 +1108,18 @@ EXPORT_SYMBOL(get_random_bytes); - static void init_std_data(struct entropy_store *r) - { - int i; -- ktime_t now; -- unsigned long flags; -+ ktime_t now = ktime_get_real(); -+ unsigned long rv; - -- spin_lock_irqsave(&r->lock, flags); - r->entropy_count = 0; -- spin_unlock_irqrestore(&r->lock, flags); -- -- now = ktime_get_real(); -- mix_pool_bytes(r, &now, sizeof(now)); -- for (i = r->poolinfo->POOLBYTES; i > 0; i -= sizeof flags) { -- if (!arch_get_random_long(&flags)) -+ r->entropy_total = 0; -+ mix_pool_bytes(r, &now, sizeof(now), NULL); -+ for (i = r->poolinfo->POOLBYTES; i > 0; i -= sizeof(rv)) { -+ if (!arch_get_random_long(&rv)) - break; -- mix_pool_bytes(r, &flags, sizeof(flags)); -+ mix_pool_bytes(r, &rv, sizeof(rv), NULL); - } -- mix_pool_bytes(r, utsname(), sizeof(*(utsname()))); -+ mix_pool_bytes(r, utsname(), sizeof(*(utsname())), NULL); - } - - static int rand_initialize(void) -@@ -1117,7 +1256,7 @@ write_pool(struct entropy_store *r, cons - count -= bytes; - p += bytes; - -- mix_pool_bytes(r, buf, bytes); -+ mix_pool_bytes(r, buf, bytes, NULL); - cond_resched(); - } - -@@ -1274,6 +1413,7 @@ static int proc_do_uuid(ctl_table *table - } - - static int sysctl_poolsize = INPUT_POOL_WORDS * 32; -+extern ctl_table random_table[]; - ctl_table random_table[] = { - { - .procname = "poolsize", -@@ -1339,7 +1479,7 @@ late_initcall(random_int_secret_init); - * value is not cryptographically secure but for several uses the cost of - * depleting entropy is too high - */ --DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash); -+static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash); - unsigned int get_random_int(void) - { - __u32 *hash; ---- a/drivers/mfd/ab3100-core.c -+++ b/drivers/mfd/ab3100-core.c -@@ -409,8 +409,6 @@ static irqreturn_t ab3100_irq_handler(in - u32 fatevent; - int err; - -- add_interrupt_randomness(irq); -- - err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1, - event_regs, 3); - if (err) ---- a/drivers/usb/core/hub.c -+++ b/drivers/usb/core/hub.c -@@ -24,6 +24,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -1896,6 +1897,14 @@ int usb_new_device(struct usb_device *ud - /* Tell the world! */ - announce_device(udev); - -+ if (udev->serial) -+ add_device_randomness(udev->serial, strlen(udev->serial)); -+ if (udev->product) -+ add_device_randomness(udev->product, strlen(udev->product)); -+ if (udev->manufacturer) -+ add_device_randomness(udev->manufacturer, -+ strlen(udev->manufacturer)); -+ - device_enable_async_suspend(&udev->dev); - /* Register the device. The device driver is responsible - * for configuring the device and invoking the add-device ---- a/include/linux/random.h -+++ b/include/linux/random.h -@@ -50,11 +50,13 @@ struct rnd_state { - - extern void rand_initialize_irq(int irq); - -+extern void add_device_randomness(const void *, unsigned int); - extern void add_input_randomness(unsigned int type, unsigned int code, - unsigned int value); --extern void add_interrupt_randomness(int irq); -+extern void add_interrupt_randomness(int irq, int irq_flags); - - extern void get_random_bytes(void *buf, int nbytes); -+extern void get_random_bytes_arch(void *buf, int nbytes); - void generate_random_uuid(unsigned char uuid_out[16]); - - #ifndef MODULE ---- /dev/null -+++ b/include/trace/events/random.h -@@ -0,0 +1,134 @@ -+#undef TRACE_SYSTEM -+#define TRACE_SYSTEM random -+ -+#if !defined(_TRACE_RANDOM_H) || defined(TRACE_HEADER_MULTI_READ) -+#define _TRACE_RANDOM_H -+ -+#include -+#include -+ -+DECLARE_EVENT_CLASS(random__mix_pool_bytes, -+ TP_PROTO(const char *pool_name, int bytes, unsigned long IP), -+ -+ TP_ARGS(pool_name, bytes, IP), -+ -+ TP_STRUCT__entry( -+ __field( const char *, pool_name ) -+ __field( int, bytes ) -+ __field(unsigned long, IP ) -+ ), -+ -+ TP_fast_assign( -+ __entry->pool_name = pool_name; -+ __entry->bytes = bytes; -+ __entry->IP = IP; -+ ), -+ -+ TP_printk("%s pool: bytes %d caller %pF", -+ __entry->pool_name, __entry->bytes, (void *)__entry->IP) -+); -+ -+DEFINE_EVENT(random__mix_pool_bytes, mix_pool_bytes, -+ TP_PROTO(const char *pool_name, int bytes, unsigned long IP), -+ -+ TP_ARGS(pool_name, bytes, IP) -+); -+ -+DEFINE_EVENT(random__mix_pool_bytes, mix_pool_bytes_nolock, -+ TP_PROTO(const char *pool_name, int bytes, unsigned long IP), -+ -+ TP_ARGS(pool_name, bytes, IP) -+); -+ -+TRACE_EVENT(credit_entropy_bits, -+ TP_PROTO(const char *pool_name, int bits, int entropy_count, -+ int entropy_total, unsigned long IP), -+ -+ TP_ARGS(pool_name, bits, entropy_count, entropy_total, IP), -+ -+ TP_STRUCT__entry( -+ __field( const char *, pool_name ) -+ __field( int, bits ) -+ __field( int, entropy_count ) -+ __field( int, entropy_total ) -+ __field(unsigned long, IP ) -+ ), -+ -+ TP_fast_assign( -+ __entry->pool_name = pool_name; -+ __entry->bits = bits; -+ __entry->entropy_count = entropy_count; -+ __entry->entropy_total = entropy_total; -+ __entry->IP = IP; -+ ), -+ -+ TP_printk("%s pool: bits %d entropy_count %d entropy_total %d " -+ "caller %pF", __entry->pool_name, __entry->bits, -+ __entry->entropy_count, __entry->entropy_total, -+ (void *)__entry->IP) -+); -+ -+TRACE_EVENT(get_random_bytes, -+ TP_PROTO(int nbytes, unsigned long IP), -+ -+ TP_ARGS(nbytes, IP), -+ -+ TP_STRUCT__entry( -+ __field( int, nbytes ) -+ __field(unsigned long, IP ) -+ ), -+ -+ TP_fast_assign( -+ __entry->nbytes = nbytes; -+ __entry->IP = IP; -+ ), -+ -+ TP_printk("nbytes %d caller %pF", __entry->nbytes, (void *)__entry->IP) -+); -+ -+DECLARE_EVENT_CLASS(random__extract_entropy, -+ TP_PROTO(const char *pool_name, int nbytes, int entropy_count, -+ unsigned long IP), -+ -+ TP_ARGS(pool_name, nbytes, entropy_count, IP), -+ -+ TP_STRUCT__entry( -+ __field( const char *, pool_name ) -+ __field( int, nbytes ) -+ __field( int, entropy_count ) -+ __field(unsigned long, IP ) -+ ), -+ -+ TP_fast_assign( -+ __entry->pool_name = pool_name; -+ __entry->nbytes = nbytes; -+ __entry->entropy_count = entropy_count; -+ __entry->IP = IP; -+ ), -+ -+ TP_printk("%s pool: nbytes %d entropy_count %d caller %pF", -+ __entry->pool_name, __entry->nbytes, __entry->entropy_count, -+ (void *)__entry->IP) -+); -+ -+ -+DEFINE_EVENT(random__extract_entropy, extract_entropy, -+ TP_PROTO(const char *pool_name, int nbytes, int entropy_count, -+ unsigned long IP), -+ -+ TP_ARGS(pool_name, nbytes, entropy_count, IP) -+); -+ -+DEFINE_EVENT(random__extract_entropy, extract_entropy_user, -+ TP_PROTO(const char *pool_name, int nbytes, int entropy_count, -+ unsigned long IP), -+ -+ TP_ARGS(pool_name, nbytes, entropy_count, IP) -+); -+ -+ -+ -+#endif /* _TRACE_RANDOM_H */ -+ -+/* This part must be outside protection */ -+#include ---- a/kernel/irq/handle.c -+++ b/kernel/irq/handle.c -@@ -117,7 +117,7 @@ irqreturn_t - handle_irq_event_percpu(struct irq_desc *desc, struct irqaction *action) - { - irqreturn_t retval = IRQ_NONE; -- unsigned int random = 0, irq = desc->irq_data.irq; -+ unsigned int flags = 0, irq = desc->irq_data.irq; - - do { - irqreturn_t res; -@@ -145,7 +145,7 @@ handle_irq_event_percpu(struct irq_desc - - /* Fall through to add to randomness */ - case IRQ_HANDLED: -- random |= action->flags; -+ flags |= action->flags; - break; - - default: -@@ -156,8 +156,7 @@ handle_irq_event_percpu(struct irq_desc - action = action->next; - } while (action); - -- if (random & IRQF_SAMPLE_RANDOM) -- add_interrupt_randomness(irq); -+ add_interrupt_randomness(irq, flags); - - if (!noirqdebug) - note_interrupt(irq, desc, retval); ---- a/net/core/dev.c -+++ b/net/core/dev.c -@@ -1176,6 +1176,7 @@ static int __dev_open(struct net_device - net_dmaengine_get(); - dev_set_rx_mode(dev); - dev_activate(dev); -+ add_device_randomness(dev->dev_addr, dev->addr_len); - } - - return ret; -@@ -4823,6 +4824,7 @@ int dev_set_mac_address(struct net_devic - err = ops->ndo_set_mac_address(dev, sa); - if (!err) - call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); -+ add_device_randomness(dev->dev_addr, dev->addr_len); - return err; - } - EXPORT_SYMBOL(dev_set_mac_address); -@@ -5602,6 +5604,7 @@ int register_netdevice(struct net_device - dev_init_scheduler(dev); - dev_hold(dev); - list_netdevice(dev); -+ add_device_randomness(dev->dev_addr, dev->addr_len); - - /* Notify protocols, that a new device appeared. */ - ret = call_netdevice_notifiers(NETDEV_REGISTER, dev); ---- a/net/core/rtnetlink.c -+++ b/net/core/rtnetlink.c -@@ -1371,6 +1371,7 @@ static int do_setlink(struct net_device - goto errout; - send_addr_notify = 1; - modified = 1; -+ add_device_randomness(dev->dev_addr, dev->addr_len); - } - - if (tb[IFLA_MTU]) { diff --git a/target/linux/generic/patches-3.3/051-rng_git_backport-remove_irqf_sample_random.patch b/target/linux/generic/patches-3.3/051-rng_git_backport-remove_irqf_sample_random.patch deleted file mode 100644 index 93706ed3f6..0000000000 --- a/target/linux/generic/patches-3.3/051-rng_git_backport-remove_irqf_sample_random.patch +++ /dev/null @@ -1,543 +0,0 @@ ---- a/arch/arm/mach-omap1/board-palmz71.c -+++ b/arch/arm/mach-omap1/board-palmz71.c -@@ -291,8 +291,7 @@ palmz71_gpio_setup(int early) - } - gpio_direction_input(PALMZ71_USBDETECT_GPIO); - if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO), -- palmz71_powercable, IRQF_SAMPLE_RANDOM, -- "palmz71-cable", 0)) -+ palmz71_powercable, 0, "palmz71-cable", 0)) - printk(KERN_ERR - "IRQ request for power cable failed!\n"); - palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), 0); ---- a/arch/arm/mach-pxa/lubbock.c -+++ b/arch/arm/mach-pxa/lubbock.c -@@ -455,7 +455,7 @@ static int lubbock_mci_init(struct devic - init_timer(&mmc_timer); - mmc_timer.data = (unsigned long) data; - return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int, -- IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data); -+ 0, "lubbock-sd-detect", data); - } - - static int lubbock_mci_get_ro(struct device *dev) ---- a/arch/arm/mach-pxa/magician.c -+++ b/arch/arm/mach-pxa/magician.c -@@ -617,9 +617,8 @@ static struct platform_device bq24022 = - static int magician_mci_init(struct device *dev, - irq_handler_t detect_irq, void *data) - { -- return request_irq(IRQ_MAGICIAN_SD, detect_irq, -- IRQF_DISABLED | IRQF_SAMPLE_RANDOM, -- "mmc card detect", data); -+ return request_irq(IRQ_MAGICIAN_SD, detect_irq, IRQF_DISABLED, -+ "mmc card detect", data); - } - - static void magician_mci_exit(struct device *dev, void *data) ---- a/arch/arm/mach-pxa/trizeps4.c -+++ b/arch/arm/mach-pxa/trizeps4.c -@@ -332,8 +332,8 @@ static int trizeps4_mci_init(struct devi - int err; - - err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, -- IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM, -- "MMC card detect", data); -+ IRQF_DISABLED | IRQF_TRIGGER_RISING, -+ "MMC card detect", data); - if (err) { - printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request" - "MMC card detect IRQ\n"); ---- a/arch/ia64/kernel/irq_ia64.c -+++ b/arch/ia64/kernel/irq_ia64.c -@@ -23,7 +23,6 @@ - #include - #include - #include --#include /* for rand_initialize_irq() */ - #include - #include - #include ---- a/arch/sparc/kernel/ldc.c -+++ b/arch/sparc/kernel/ldc.c -@@ -1250,14 +1250,12 @@ int ldc_bind(struct ldc_channel *lp, con - snprintf(lp->rx_irq_name, LDC_IRQ_NAME_MAX, "%s RX", name); - snprintf(lp->tx_irq_name, LDC_IRQ_NAME_MAX, "%s TX", name); - -- err = request_irq(lp->cfg.rx_irq, ldc_rx, -- IRQF_SAMPLE_RANDOM | IRQF_DISABLED, -+ err = request_irq(lp->cfg.rx_irq, ldc_rx, IRQF_DISABLED, - lp->rx_irq_name, lp); - if (err) - return err; - -- err = request_irq(lp->cfg.tx_irq, ldc_tx, -- IRQF_SAMPLE_RANDOM | IRQF_DISABLED, -+ err = request_irq(lp->cfg.tx_irq, ldc_tx, IRQF_DISABLED, - lp->tx_irq_name, lp); - if (err) { - free_irq(lp->cfg.rx_irq, lp); ---- a/arch/um/drivers/line.c -+++ b/arch/um/drivers/line.c -@@ -371,7 +371,7 @@ static irqreturn_t line_write_interrupt( - int line_setup_irq(int fd, int input, int output, struct line *line, void *data) - { - const struct line_driver *driver = line->driver; -- int err = 0, flags = IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM; -+ int err = 0, flags = IRQF_DISABLED | IRQF_SHARED; - - if (input) - err = um_request_irq(driver->read_irq, fd, IRQ_READ, -@@ -807,7 +807,7 @@ void register_winch_irq(int fd, int tty_ - .stack = stack }); - - if (um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt, -- IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM, -+ IRQF_DISABLED | IRQF_SHARED, - "winch", winch) < 0) { - printk(KERN_ERR "register_winch_irq - failed to register " - "IRQ\n"); ---- a/arch/um/drivers/mconsole_kern.c -+++ b/arch/um/drivers/mconsole_kern.c -@@ -773,7 +773,7 @@ static int __init mconsole_init(void) - register_reboot_notifier(&reboot_notifier); - - err = um_request_irq(MCONSOLE_IRQ, sock, IRQ_READ, mconsole_interrupt, -- IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM, -+ IRQF_DISABLED | IRQF_SHARED, - "mconsole", (void *)sock); - if (err) { - printk(KERN_ERR "Failed to get IRQ for management console\n"); ---- a/arch/um/drivers/port_kern.c -+++ b/arch/um/drivers/port_kern.c -@@ -100,7 +100,7 @@ static int port_accept(struct port_list - .port = port }); - - if (um_request_irq(TELNETD_IRQ, socket[0], IRQ_READ, pipe_interrupt, -- IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM, -+ IRQF_DISABLED | IRQF_SHARED, - "telnetd", conn)) { - printk(KERN_ERR "port_accept : failed to get IRQ for " - "telnetd\n"); -@@ -184,7 +184,7 @@ void *port_data(int port_num) - } - - if (um_request_irq(ACCEPT_IRQ, fd, IRQ_READ, port_interrupt, -- IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM, -+ IRQF_DISABLED | IRQF_SHARED, - "port", port)) { - printk(KERN_ERR "Failed to get IRQ for port %d\n", port_num); - goto out_close; ---- a/arch/um/drivers/random.c -+++ b/arch/um/drivers/random.c -@@ -131,8 +131,7 @@ static int __init rng_init (void) - random_fd = err; - - err = um_request_irq(RANDOM_IRQ, random_fd, IRQ_READ, random_interrupt, -- IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "random", -- NULL); -+ IRQF_DISABLED, "random", NULL); - if (err) - goto err_out_cleanup_hw; - ---- a/arch/um/drivers/xterm_kern.c -+++ b/arch/um/drivers/xterm_kern.c -@@ -50,8 +50,7 @@ int xterm_fd(int socket, int *pid_out) - init_completion(&data->ready); - - err = um_request_irq(XTERM_IRQ, socket, IRQ_READ, xterm_interrupt, -- IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM, -- "xterm", data); -+ IRQF_DISABLED | IRQF_SHARED, "xterm", data); - if (err) { - printk(KERN_ERR "xterm_fd : failed to get IRQ for xterm, " - "err = %d\n", err); ---- a/arch/um/kernel/sigio.c -+++ b/arch/um/kernel/sigio.c -@@ -25,8 +25,7 @@ int write_sigio_irq(int fd) - int err; - - err = um_request_irq(SIGIO_WRITE_IRQ, fd, IRQ_READ, sigio_interrupt, -- IRQF_DISABLED|IRQF_SAMPLE_RANDOM, "write sigio", -- NULL); -+ IRQF_DISABLED, "write sigio", NULL); - if (err) { - printk(KERN_ERR "write_sigio_irq : um_request_irq failed, " - "err = %d\n", err); ---- a/Documentation/feature-removal-schedule.txt -+++ b/Documentation/feature-removal-schedule.txt -@@ -71,20 +71,6 @@ Who: Luis R. Rodriguez & Matt Mackall -- ----------------------------- -- - What: The ieee80211_regdom module parameter - When: March 2010 / desktop catchup - ---- a/drivers/block/xen-blkfront.c -+++ b/drivers/block/xen-blkfront.c -@@ -852,9 +852,8 @@ static int setup_blkring(struct xenbus_d - if (err) - goto fail; - -- err = bind_evtchn_to_irqhandler(info->evtchn, -- blkif_interrupt, -- IRQF_SAMPLE_RANDOM, "blkif", info); -+ err = bind_evtchn_to_irqhandler(info->evtchn, blkif_interrupt, 0, -+ "blkif", info); - if (err <= 0) { - xenbus_dev_fatal(dev, err, - "bind_evtchn_to_irqhandler failed"); ---- a/drivers/char/random.c -+++ b/drivers/char/random.c -@@ -633,43 +633,6 @@ struct timer_rand_state { - unsigned dont_count_entropy:1; - }; - --#ifndef CONFIG_GENERIC_HARDIRQS -- --static struct timer_rand_state *irq_timer_state[NR_IRQS]; -- --static struct timer_rand_state *get_timer_rand_state(unsigned int irq) --{ -- return irq_timer_state[irq]; --} -- --static void set_timer_rand_state(unsigned int irq, -- struct timer_rand_state *state) --{ -- irq_timer_state[irq] = state; --} -- --#else -- --static struct timer_rand_state *get_timer_rand_state(unsigned int irq) --{ -- struct irq_desc *desc; -- -- desc = irq_to_desc(irq); -- -- return desc->timer_rand_state; --} -- --static void set_timer_rand_state(unsigned int irq, -- struct timer_rand_state *state) --{ -- struct irq_desc *desc; -- -- desc = irq_to_desc(irq); -- -- desc->timer_rand_state = state; --} --#endif -- - /* - * Add device- or boot-specific data to the input and nonblocking - * pools to help initialize them to unique values. -@@ -1131,24 +1094,6 @@ static int rand_initialize(void) - } - module_init(rand_initialize); - --void rand_initialize_irq(int irq) --{ -- struct timer_rand_state *state; -- -- state = get_timer_rand_state(irq); -- -- if (state) -- return; -- -- /* -- * If kzalloc returns null, we just won't use that entropy -- * source. -- */ -- state = kzalloc(sizeof(struct timer_rand_state), GFP_KERNEL); -- if (state) -- set_timer_rand_state(irq, state); --} -- - #ifdef CONFIG_BLOCK - void rand_initialize_disk(struct gendisk *disk) - { ---- a/drivers/crypto/n2_core.c -+++ b/drivers/crypto/n2_core.c -@@ -1607,8 +1607,7 @@ static int spu_map_ino(struct platform_d - - sprintf(p->irq_name, "%s-%d", irq_name, index); - -- return request_irq(p->irq, handler, IRQF_SAMPLE_RANDOM, -- p->irq_name, p); -+ return request_irq(p->irq, handler, 0, p->irq_name, p); - } - - static struct kmem_cache *queue_cache[2]; ---- a/drivers/hv/vmbus_drv.c -+++ b/drivers/hv/vmbus_drv.c -@@ -545,8 +545,7 @@ static int vmbus_bus_init(int irq) - if (ret) - goto err_cleanup; - -- ret = request_irq(irq, vmbus_isr, IRQF_SAMPLE_RANDOM, -- driver_name, hv_acpi_dev); -+ ret = request_irq(irq, vmbus_isr, 0, driver_name, hv_acpi_dev); - - if (ret != 0) { - pr_err("Unable to request IRQ %d\n", ---- a/drivers/i2c/busses/i2c-pmcmsp.c -+++ b/drivers/i2c/busses/i2c-pmcmsp.c -@@ -306,8 +306,7 @@ static int __devinit pmcmsptwi_probe(str - pmcmsptwi_data.irq = platform_get_irq(pldev, 0); - if (pmcmsptwi_data.irq) { - rc = request_irq(pmcmsptwi_data.irq, &pmcmsptwi_interrupt, -- IRQF_SHARED | IRQF_SAMPLE_RANDOM, -- pldev->name, &pmcmsptwi_data); -+ IRQF_SHARED, pldev->name, &pmcmsptwi_data); - if (rc == 0) { - /* - * Enable 'DONE' interrupt only. ---- a/drivers/input/serio/hp_sdc.c -+++ b/drivers/input/serio/hp_sdc.c -@@ -879,7 +879,7 @@ static int __init hp_sdc_init(void) - #endif - - errstr = "IRQ not available for"; -- if (request_irq(hp_sdc.irq, &hp_sdc_isr, IRQF_SHARED|IRQF_SAMPLE_RANDOM, -+ if (request_irq(hp_sdc.irq, &hp_sdc_isr, IRQF_SHARED, - "HP SDC", &hp_sdc)) - goto err1; - ---- a/drivers/mfd/ab3100-core.c -+++ b/drivers/mfd/ab3100-core.c -@@ -937,9 +937,6 @@ static int __devinit ab3100_probe(struct - - err = request_threaded_irq(client->irq, NULL, ab3100_irq_handler, - IRQF_ONESHOT, "ab3100-core", ab3100); -- /* This real unpredictable IRQ is of course sampled for entropy */ -- rand_initialize_irq(client->irq); -- - if (err) - goto exit_no_irq; - ---- a/drivers/mfd/tps65010.c -+++ b/drivers/mfd/tps65010.c -@@ -563,8 +563,7 @@ static int tps65010_probe(struct i2c_cli - */ - if (client->irq > 0) { - status = request_irq(client->irq, tps65010_irq, -- IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_FALLING, -- DRIVER_NAME, tps); -+ IRQF_TRIGGER_FALLING, DRIVER_NAME, tps); - if (status < 0) { - dev_dbg(&client->dev, "can't get IRQ %d, err %d\n", - client->irq, status); ---- a/drivers/net/ethernet/broadcom/tg3.c -+++ b/drivers/net/ethernet/broadcom/tg3.c -@@ -9415,7 +9415,7 @@ static int tg3_test_interrupt(struct tg3 - } - - err = request_irq(tnapi->irq_vec, tg3_test_isr, -- IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, tnapi); -+ IRQF_SHARED, dev->name, tnapi); - if (err) - return err; - ---- a/drivers/power/pda_power.c -+++ b/drivers/power/pda_power.c -@@ -24,11 +24,7 @@ - - static inline unsigned int get_irq_flags(struct resource *res) - { -- unsigned int flags = IRQF_SAMPLE_RANDOM | IRQF_SHARED; -- -- flags |= res->flags & IRQF_TRIGGER_MASK; -- -- return flags; -+ return IRQF_SHARED | (res->flags & IRQF_TRIGGER_MASK); - } - - static struct device *dev; ---- a/drivers/tty/serial/uartlite.c -+++ b/drivers/tty/serial/uartlite.c -@@ -216,8 +216,7 @@ static int ulite_startup(struct uart_por - { - int ret; - -- ret = request_irq(port->irq, ulite_isr, -- IRQF_SHARED | IRQF_SAMPLE_RANDOM, "uartlite", port); -+ ret = request_irq(port->irq, ulite_isr, IRQF_SHARED, "uartlite", port); - if (ret) - return ret; - ---- a/drivers/usb/gadget/goku_udc.c -+++ b/drivers/usb/gadget/goku_udc.c -@@ -1839,7 +1839,7 @@ static int goku_probe(struct pci_dev *pd - /* init to known state, then setup irqs */ - udc_reset(dev); - udc_reinit (dev); -- if (request_irq(pdev->irq, goku_irq, IRQF_SHARED/*|IRQF_SAMPLE_RANDOM*/, -+ if (request_irq(pdev->irq, goku_irq, IRQF_SHARED, - driver_name, dev) != 0) { - DBG(dev, "request interrupt %d failed\n", pdev->irq); - retval = -EBUSY; ---- a/drivers/usb/gadget/omap_udc.c -+++ b/drivers/usb/gadget/omap_udc.c -@@ -2943,7 +2943,7 @@ known: - - /* USB general purpose IRQ: ep0, state changes, dma, etc */ - status = request_irq(pdev->resource[1].start, omap_udc_irq, -- IRQF_SAMPLE_RANDOM, driver_name, udc); -+ 0, driver_name, udc); - if (status != 0) { - ERR("can't get irq %d, err %d\n", - (int) pdev->resource[1].start, status); -@@ -2952,7 +2952,7 @@ known: - - /* USB "non-iso" IRQ (PIO for all but ep0) */ - status = request_irq(pdev->resource[2].start, omap_udc_pio_irq, -- IRQF_SAMPLE_RANDOM, "omap_udc pio", udc); -+ 0, "omap_udc pio", udc); - if (status != 0) { - ERR("can't get irq %d, err %d\n", - (int) pdev->resource[2].start, status); ---- a/drivers/usb/gadget/pxa25x_udc.c -+++ b/drivers/usb/gadget/pxa25x_udc.c -@@ -2202,19 +2202,15 @@ static int __init pxa25x_udc_probe(struc - - #ifdef CONFIG_ARCH_LUBBOCK - if (machine_is_lubbock()) { -- retval = request_irq(LUBBOCK_USB_DISC_IRQ, -- lubbock_vbus_irq, -- IRQF_SAMPLE_RANDOM, -- driver_name, dev); -+ retval = request_irq(LUBBOCK_USB_DISC_IRQ, lubbock_vbus_irq, -+ 0, driver_name, dev); - if (retval != 0) { - pr_err("%s: can't get irq %i, err %d\n", - driver_name, LUBBOCK_USB_DISC_IRQ, retval); - goto err_irq_lub; - } -- retval = request_irq(LUBBOCK_USB_IRQ, -- lubbock_vbus_irq, -- IRQF_SAMPLE_RANDOM, -- driver_name, dev); -+ retval = request_irq(LUBBOCK_USB_IRQ, lubbock_vbus_irq, -+ 0, driver_name, dev); - if (retval != 0) { - pr_err("%s: can't get irq %i, err %d\n", - driver_name, LUBBOCK_USB_IRQ, retval); ---- a/drivers/usb/otg/gpio_vbus.c -+++ b/drivers/usb/otg/gpio_vbus.c -@@ -51,8 +51,7 @@ struct gpio_vbus_data { - * edges might be workable. - */ - #define VBUS_IRQ_FLAGS \ -- ( IRQF_SAMPLE_RANDOM | IRQF_SHARED \ -- | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING ) -+ ( IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING ) - - - /* interface to regulator framework */ -@@ -253,7 +252,7 @@ static int __init gpio_vbus_probe(struct - if (res) { - irq = res->start; - res->flags &= IRQF_TRIGGER_MASK; -- res->flags |= IRQF_SAMPLE_RANDOM | IRQF_SHARED; -+ res->flags |= IRQF_SHARED; - } else - irq = gpio_to_irq(gpio); - ---- a/drivers/usb/otg/isp1301_omap.c -+++ b/drivers/usb/otg/isp1301_omap.c -@@ -1567,7 +1567,6 @@ isp1301_probe(struct i2c_client *i2c, co - isp->irq_type = IRQF_TRIGGER_FALLING; - } - -- isp->irq_type |= IRQF_SAMPLE_RANDOM; - status = request_irq(i2c->irq, isp1301_irq, - isp->irq_type, DRIVER_NAME, isp); - if (status < 0) { ---- a/include/linux/interrupt.h -+++ b/include/linux/interrupt.h -@@ -44,7 +44,6 @@ - * - * IRQF_DISABLED - keep irqs disabled when calling the action handler. - * DEPRECATED. This flag is a NOOP and scheduled to be removed -- * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator - * IRQF_SHARED - allow sharing the irq among several devices - * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur - * IRQF_TIMER - Flag to mark this interrupt as timer interrupt -@@ -63,7 +62,6 @@ - * resume time. - */ - #define IRQF_DISABLED 0x00000020 --#define IRQF_SAMPLE_RANDOM 0x00000040 - #define IRQF_SHARED 0x00000080 - #define IRQF_PROBE_SHARED 0x00000100 - #define __IRQF_TIMER 0x00000200 ---- a/include/linux/irqdesc.h -+++ b/include/linux/irqdesc.h -@@ -39,7 +39,6 @@ struct module; - */ - struct irq_desc { - struct irq_data irq_data; -- struct timer_rand_state *timer_rand_state; - unsigned int __percpu *kstat_irqs; - irq_flow_handler_t handle_irq; - #ifdef CONFIG_IRQ_PREFLOW_FASTEOI ---- a/include/linux/random.h -+++ b/include/linux/random.h -@@ -48,8 +48,6 @@ struct rnd_state { - - #ifdef __KERNEL__ - --extern void rand_initialize_irq(int irq); -- - extern void add_device_randomness(const void *, unsigned int); - extern void add_input_randomness(unsigned int type, unsigned int code, - unsigned int value); ---- a/kernel/irq/manage.c -+++ b/kernel/irq/manage.c -@@ -891,22 +891,6 @@ __setup_irq(unsigned int irq, struct irq - return -ENOSYS; - if (!try_module_get(desc->owner)) - return -ENODEV; -- /* -- * Some drivers like serial.c use request_irq() heavily, -- * so we have to be careful not to interfere with a -- * running system. -- */ -- if (new->flags & IRQF_SAMPLE_RANDOM) { -- /* -- * This function might sleep, we want to call it first, -- * outside of the atomic block. -- * Yes, this might clear the entropy pool if the wrong -- * driver is attempted to be loaded, without actually -- * installing a new handler, but is this really a problem, -- * only the sysadmin is able to do this. -- */ -- rand_initialize_irq(irq); -- } - - /* - * Check whether the interrupt nests into another interrupt -@@ -1342,7 +1326,6 @@ EXPORT_SYMBOL(free_irq); - * Flags: - * - * IRQF_SHARED Interrupt is shared -- * IRQF_SAMPLE_RANDOM The interrupt can be used for entropy - * IRQF_TRIGGER_* Specify active edge(s) or level - * - */ diff --git a/target/linux/generic/patches-3.3/060-hso_devices.patch b/target/linux/generic/patches-3.3/060-hso_devices.patch deleted file mode 100644 index 9b15c75721..0000000000 --- a/target/linux/generic/patches-3.3/060-hso_devices.patch +++ /dev/null @@ -1,36 +0,0 @@ ---- a/drivers/net/usb/hso.c -+++ b/drivers/net/usb/hso.c -@@ -476,8 +476,10 @@ static const struct usb_device_id hso_id - {USB_DEVICE(0x0af0, 0x8400)}, - {USB_DEVICE(0x0af0, 0x8600)}, - {USB_DEVICE(0x0af0, 0x8800)}, -- {USB_DEVICE(0x0af0, 0x8900)}, -- {USB_DEVICE(0x0af0, 0x9000)}, -+ {USB_DEVICE(0x0af0, 0x8900)}, /* GTM 67xx */ -+ {USB_DEVICE(0x0af0, 0x9000)}, /* GTM 66xx */ -+ {USB_DEVICE(0x0af0, 0x9200)}, /* GTM 67xxWFS */ -+ {USB_DEVICE(0x0af0, 0x9300)}, /* GTM 66xxWFS */ - {USB_DEVICE(0x0af0, 0xd035)}, - {USB_DEVICE(0x0af0, 0xd055)}, - {USB_DEVICE(0x0af0, 0xd155)}, ---- a/drivers/usb/storage/unusual_devs.h -+++ b/drivers/usb/storage/unusual_devs.h -@@ -1231,6 +1231,18 @@ UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0 - USB_SC_DEVICE, USB_PR_DEVICE, NULL, - 0 ), - -+UNUSUAL_DEV( 0x0af0, 0x9200, 0x0000, 0x0000, -+ "Option", -+ "Globetrotter 67xxWFS SD-Card", -+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, -+ 0 ), -+ -+UNUSUAL_DEV( 0x0af0, 0x9300, 0x0000, 0x0000, -+ "Option", -+ "Globetrotter 66xxWFS SD-Card", -+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, -+ 0 ), -+ - UNUSUAL_DEV( 0x0af0, 0xc100, 0x0000, 0x0000, - "Option", - "GI 070x SD-Card", diff --git a/target/linux/generic/patches-3.3/060-tcp-ecn-dont-delay-ACKS-after-CE.patch b/target/linux/generic/patches-3.3/060-tcp-ecn-dont-delay-ACKS-after-CE.patch deleted file mode 100644 index 6f1cd1247b..0000000000 --- a/target/linux/generic/patches-3.3/060-tcp-ecn-dont-delay-ACKS-after-CE.patch +++ /dev/null @@ -1,61 +0,0 @@ -From patchwork Mon Aug 6 21:04:43 2012 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [net-next] tcp: ecn: dont delay ACKS after CE -Date: Mon, 06 Aug 2012 11:04:43 -0000 -From: Eric Dumazet -X-Patchwork-Id: 175453 -Message-Id: <1344287083.26674.83.camel@edumazet-glaptop> -To: David Miller -Cc: netdev , - Neal Cardwell - -From: Eric Dumazet - -While playing with CoDel and ECN marking, I discovered a -non optimal behavior of receiver of CE (Congestion Encountered) -segments. - -In pathological cases, sender has reduced its cwnd to low values, -and receiver delays its ACK (by 40 ms). - -While RFC 3168 6.1.3 (The TCP Receiver) doesn't explicitly recommend -to send immediate ACKS, we believe its better to not delay ACKS, because -a CE segment should give same signal than a dropped segment, and its -quite important to reduce RTT to give ECE/CWR signals as fast as -possible. - -Note we already call tcp_enter_quickack_mode() from TCP_ECN_check_ce() -if we receive a retransmit, for the same reason. - -Signed-off-by: Eric Dumazet -Cc: Neal Cardwell -Acked-by: Neal Cardwell - ---- -net/ipv4/tcp_input.c | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - - - --- -To unsubscribe from this list: send the line "unsubscribe netdev" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html - ---- a/net/ipv4/tcp_input.c -+++ b/net/ipv4/tcp_input.c -@@ -231,7 +231,11 @@ static inline void TCP_ECN_check_ce(stru - tcp_enter_quickack_mode((struct sock *)tp); - break; - case INET_ECN_CE: -- tp->ecn_flags |= TCP_ECN_DEMAND_CWR; -+ if (!(tp->ecn_flags & TCP_ECN_DEMAND_CWR)) { -+ /* Better not delay acks, sender can have a very low cwnd */ -+ tcp_enter_quickack_mode((struct sock *)tp); -+ tp->ecn_flags |= TCP_ECN_DEMAND_CWR; -+ } - /* fallinto */ - default: - tp->ecn_flags |= TCP_ECN_SEEN; diff --git a/target/linux/generic/patches-3.3/061-fq_codel-dont-reinit-flow-state.patch b/target/linux/generic/patches-3.3/061-fq_codel-dont-reinit-flow-state.patch deleted file mode 100644 index 6699e98f76..0000000000 --- a/target/linux/generic/patches-3.3/061-fq_codel-dont-reinit-flow-state.patch +++ /dev/null @@ -1,36 +0,0 @@ -From b379135c40163ae79ba7a54e6928b53983e74ee8 Mon Sep 17 00:00:00 2001 -From: Eric Dumazet -Date: Sat, 1 Sep 2012 03:19:57 +0000 -Subject: [PATCH 307/558] fq_codel: dont reinit flow state - -When fq_codel builds a new flow, it should not reset codel state. - -Codel algo needs to get previous values (lastcount, drop_next) to get -proper behavior. - -Signed-off-by: Dave Taht -Signed-off-by: Eric Dumazet -Acked-by: Dave Taht -Signed-off-by: David S. Miller ---- - net/sched/sch_fq_codel.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/net/sched/sch_fq_codel.c -+++ b/net/sched/sch_fq_codel.c -@@ -191,7 +191,6 @@ static int fq_codel_enqueue(struct sk_bu - - if (list_empty(&flow->flowchain)) { - list_add_tail(&flow->flowchain, &q->new_flows); -- codel_vars_init(&flow->cvars); - q->new_flow_count++; - flow->deficit = q->quantum; - flow->dropped = 0; -@@ -418,6 +417,7 @@ static int fq_codel_init(struct Qdisc *s - struct fq_codel_flow *flow = q->flows + i; - - INIT_LIST_HEAD(&flow->flowchain); -+ codel_vars_init(&flow->cvars); - } - } - if (sch->limit >= 1) diff --git a/target/linux/generic/patches-3.3/065-8139cp-fixes.patch b/target/linux/generic/patches-3.3/065-8139cp-fixes.patch deleted file mode 100644 index 77c903c06b..0000000000 --- a/target/linux/generic/patches-3.3/065-8139cp-fixes.patch +++ /dev/null @@ -1,187 +0,0 @@ -commit 01ffc0a7f1c1801a2354719dedbc32aff45b987d -Author: David Woodhouse -Date: Sat Nov 24 12:11:21 2012 +0000 - - 8139cp: re-enable interrupts after tx timeout - - Recovery doesn't work too well if we leave interrupts disabled... - - Signed-off-by: David Woodhouse - Acked-by: Francois Romieu - Signed-off-by: David S. Miller - -commit 871f0d4c153e1258d4becf306eca6761bf38b629 -Author: David Woodhouse -Date: Thu Nov 22 03:16:58 2012 +0000 - - 8139cp: enable bql - - This adds support for byte queue limits on RTL8139C+ - - Tested on real hardware. - - Signed-off-by: David Woodhouse - Acked-By: Dave Täht - Signed-off-by: David S. Miller - -commit a9dbe40fc10cea2efe6e1ff9e03c62dd7579c5ba -Author: David Woodhouse -Date: Wed Nov 21 10:27:19 2012 +0000 - - 8139cp: set ring address after enabling C+ mode - - This fixes (for me) a regression introduced by commit b01af457 ("8139cp: - set ring address before enabling receiver"). That commit configured the - descriptor ring addresses earlier in the initialisation sequence, in - order to avoid the possibility of triggering stray DMA before the - correct address had been set up. - - Unfortunately, it seems that the hardware will scribble garbage into the - TxRingAddr registers when we enable "plus mode" Tx in the CpCmd - register. Observed on a Traverse Geos router board. - - To deal with this, while not reintroducing the problem which led to the - original commit, we augment cp_start_hw() to write to the CpCmd register - *first*, then set the descriptor ring addresses, and then finally to - enable Rx and Tx in the original 8139 Cmd register. The datasheet - actually indicates that we should enable Tx/Rx in the Cmd register - *before* configuring the descriptor addresses, but that would appear to - re-introduce the problem that the offending commit b01af457 was trying - to solve. And this variant appears to work fine on real hardware. - - Signed-off-by: David Woodhouse - Cc: stable@kernel.org [3.5+] - Signed-off-by: David S. Miller - -commit 071e3ef4a94a021b16a2912f3885c86f4ff36b49 -Author: David S. Miller -Date: Sun Nov 25 15:52:09 2012 -0500 - - Revert "8139cp: revert "set ring address before enabling receiver"" - - This reverts commit b26623dab7eeb1e9f5898c7a49458789dd492f20. - - This reverts the revert, in net-next we'll try another scheme - to fix this bug using patches from David Woodhouse. - - Signed-off-by: David S. Miller - ---- a/drivers/net/ethernet/realtek/8139cp.c -+++ b/drivers/net/ethernet/realtek/8139cp.c -@@ -645,6 +645,7 @@ static void cp_tx (struct cp_private *cp - { - unsigned tx_head = cp->tx_head; - unsigned tx_tail = cp->tx_tail; -+ unsigned bytes_compl = 0, pkts_compl = 0; - - while (tx_tail != tx_head) { - struct cp_desc *txd = cp->tx_ring + tx_tail; -@@ -663,6 +664,9 @@ static void cp_tx (struct cp_private *cp - le32_to_cpu(txd->opts1) & 0xffff, - PCI_DMA_TODEVICE); - -+ bytes_compl += skb->len; -+ pkts_compl++; -+ - if (status & LastFrag) { - if (status & (TxError | TxFIFOUnder)) { - netif_dbg(cp, tx_err, cp->dev, -@@ -694,6 +698,7 @@ static void cp_tx (struct cp_private *cp - - cp->tx_tail = tx_tail; - -+ netdev_completed_queue(cp->dev, pkts_compl, bytes_compl); - if (TX_BUFFS_AVAIL(cp) > (MAX_SKB_FRAGS + 1)) - netif_wake_queue(cp->dev); - } -@@ -840,6 +845,8 @@ static netdev_tx_t cp_start_xmit (struct - wmb(); - } - cp->tx_head = entry; -+ -+ netdev_sent_queue(dev, skb->len); - netif_dbg(cp, tx_queued, cp->dev, "tx queued, slot %d, skblen %d\n", - entry, skb->len); - if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1)) -@@ -934,6 +941,8 @@ static void cp_stop_hw (struct cp_privat - - cp->rx_tail = 0; - cp->tx_head = cp->tx_tail = 0; -+ -+ netdev_reset_queue(cp->dev); - } - - static void cp_reset_hw (struct cp_private *cp) -@@ -954,8 +963,38 @@ static void cp_reset_hw (struct cp_priva - - static inline void cp_start_hw (struct cp_private *cp) - { -+ dma_addr_t ring_dma; -+ - cpw16(CpCmd, cp->cpcmd); -+ -+ /* -+ * These (at least TxRingAddr) need to be configured after the -+ * corresponding bits in CpCmd are enabled. Datasheet v1.6 §6.33 -+ * (C+ Command Register) recommends that these and more be configured -+ * *after* the [RT]xEnable bits in CpCmd are set. And on some hardware -+ * it's been observed that the TxRingAddr is actually reset to garbage -+ * when C+ mode Tx is enabled in CpCmd. -+ */ -+ cpw32_f(HiTxRingAddr, 0); -+ cpw32_f(HiTxRingAddr + 4, 0); -+ -+ ring_dma = cp->ring_dma; -+ cpw32_f(RxRingAddr, ring_dma & 0xffffffff); -+ cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16); -+ -+ ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE; -+ cpw32_f(TxRingAddr, ring_dma & 0xffffffff); -+ cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16); -+ -+ /* -+ * Strictly speaking, the datasheet says this should be enabled -+ * *before* setting the descriptor addresses. But what, then, would -+ * prevent it from doing DMA to random unconfigured addresses? -+ * This variant appears to work fine. -+ */ - cpw8(Cmd, RxOn | TxOn); -+ -+ netdev_reset_queue(cp->dev); - } - - static void cp_enable_irq(struct cp_private *cp) -@@ -966,7 +1005,6 @@ static void cp_enable_irq(struct cp_priv - static void cp_init_hw (struct cp_private *cp) - { - struct net_device *dev = cp->dev; -- dma_addr_t ring_dma; - - cp_reset_hw(cp); - -@@ -989,17 +1027,6 @@ static void cp_init_hw (struct cp_privat - - cpw8(Config5, cpr8(Config5) & PMEStatus); - -- cpw32_f(HiTxRingAddr, 0); -- cpw32_f(HiTxRingAddr + 4, 0); -- -- ring_dma = cp->ring_dma; -- cpw32_f(RxRingAddr, ring_dma & 0xffffffff); -- cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16); -- -- ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE; -- cpw32_f(TxRingAddr, ring_dma & 0xffffffff); -- cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16); -- - cpw16(MultiIntr, 0); - - cpw8_f(Cfg9346, Cfg9346_Lock); -@@ -1188,6 +1215,7 @@ static void cp_tx_timeout(struct net_dev - cp_clean_rings(cp); - rc = cp_init_rings(cp); - cp_start_hw(cp); -+ cp_enable_irq(cp); - - netif_wake_queue(dev); - diff --git a/target/linux/generic/patches-3.3/070-gpio-add-flags-to-export-GPIOs-when-requesting.patch b/target/linux/generic/patches-3.3/070-gpio-add-flags-to-export-GPIOs-when-requesting.patch deleted file mode 100644 index fb4387eb21..0000000000 --- a/target/linux/generic/patches-3.3/070-gpio-add-flags-to-export-GPIOs-when-requesting.patch +++ /dev/null @@ -1,68 +0,0 @@ -From fc3a1f04f5040255cbc086c419e4237f29f89f88 Mon Sep 17 00:00:00 2001 -From: Wolfram Sang -Date: Tue, 13 Dec 2011 18:34:01 +0100 -Subject: [PATCH] gpio: add flags to export GPIOs when requesting - -commit fc3a1f04f5040255cbc086c419e4237f29f89f88 upstream. - -Introduce new flags to automatically export GPIOs when using the convenience -functions gpio_request_one() or gpio_request_array(). This eases support for -custom boards where lots of GPIOs need to be exported for customer -applications. - -Signed-off-by: Wolfram Sang -Signed-off-by: Grant Likely ---- - Documentation/gpio.txt | 3 +++ - drivers/gpio/gpiolib.c | 12 +++++++++++- - include/linux/gpio.h | 5 +++++ - 3 files changed, 19 insertions(+), 1 deletion(-) - ---- a/Documentation/gpio.txt -+++ b/Documentation/gpio.txt -@@ -303,6 +303,9 @@ where 'flags' is currently defined to sp - * GPIOF_INIT_LOW - as output, set initial level to LOW - * GPIOF_INIT_HIGH - as output, set initial level to HIGH - -+ * GPIOF_EXPORT_DIR_FIXED - export gpio to sysfs, keep direction -+ * GPIOF_EXPORT_DIR_CHANGEABLE - also export, allow changing direction -+ - since GPIOF_INIT_* are only valid when configured as output, so group valid - combinations as: - ---- a/drivers/gpio/gpiolib.c -+++ b/drivers/gpio/gpiolib.c -@@ -1289,8 +1289,18 @@ int gpio_request_one(unsigned gpio, unsi - (flags & GPIOF_INIT_HIGH) ? 1 : 0); - - if (err) -- gpio_free(gpio); -+ goto free_gpio; - -+ if (flags & GPIOF_EXPORT) { -+ err = gpio_export(gpio, flags & GPIOF_EXPORT_CHANGEABLE); -+ if (err) -+ goto free_gpio; -+ } -+ -+ return 0; -+ -+ free_gpio: -+ gpio_free(gpio); - return err; - } - EXPORT_SYMBOL_GPL(gpio_request_one); ---- a/include/linux/gpio.h -+++ b/include/linux/gpio.h -@@ -14,6 +14,11 @@ - #define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW) - #define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH) - -+#define GPIOF_EXPORT (1 << 2) -+#define GPIOF_EXPORT_CHANGEABLE (1 << 3) -+#define GPIOF_EXPORT_DIR_FIXED (GPIOF_EXPORT) -+#define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE) -+ - /** - * struct gpio - a structure describing a GPIO with configuration - * @gpio: the GPIO number diff --git a/target/linux/generic/patches-3.3/080-prot-release-cb.patch b/target/linux/generic/patches-3.3/080-prot-release-cb.patch deleted file mode 100644 index 56cda6b7e1..0000000000 --- a/target/linux/generic/patches-3.3/080-prot-release-cb.patch +++ /dev/null @@ -1,27 +0,0 @@ -This was added in commit 46d3ceabd8d98ed0ad10f20c595ca784e34786c5 (tcp: -TCP Small Queues) but we need it for pppoatm too. - ---- a/include/net/sock.h -+++ b/include/net/sock.h -@@ -810,6 +810,8 @@ struct proto { - int (*backlog_rcv) (struct sock *sk, - struct sk_buff *skb); - -+ void (*release_cb)(struct sock *sk); -+ - /* Keeping track of sk's, looking them up, and port selection methods. */ - void (*hash)(struct sock *sk); - void (*unhash)(struct sock *sk); ---- a/net/core/sock.c -+++ b/net/core/sock.c -@@ -2138,6 +2138,10 @@ void release_sock(struct sock *sk) - spin_lock_bh(&sk->sk_lock.slock); - if (sk->sk_backlog.tail) - __release_sock(sk); -+ -+ if (sk->sk_prot->release_cb) -+ sk->sk_prot->release_cb(sk); -+ - sk->sk_lock.owned = 0; - if (waitqueue_active(&sk->sk_lock.wq)) - wake_up(&sk->sk_lock.wq); diff --git a/target/linux/generic/patches-3.3/081-USB-OHCI-Add-a-generic-platform-device-driver.patch b/target/linux/generic/patches-3.3/081-USB-OHCI-Add-a-generic-platform-device-driver.patch deleted file mode 100644 index 8ea102f1f9..0000000000 --- a/target/linux/generic/patches-3.3/081-USB-OHCI-Add-a-generic-platform-device-driver.patch +++ /dev/null @@ -1,271 +0,0 @@ ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -393,6 +393,16 @@ config USB_CNS3XXX_OHCI - Enable support for the CNS3XXX SOC's on-chip OHCI controller. - It is needed for low-speed USB 1.0 device support. - -+config USB_OHCI_HCD_PLATFORM -+ bool "Generic OHCI driver for a platform device" -+ depends on USB_OHCI_HCD && EXPERIMENTAL -+ default n -+ ---help--- -+ Adds an OHCI host driver for a generic platform device, which -+ provieds a memory space and an irq. -+ -+ If unsure, say N. -+ - config USB_OHCI_BIG_ENDIAN_DESC - bool - depends on USB_OHCI_HCD ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1121,6 +1121,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ohci_xls_driver - #endif - -+#ifdef CONFIG_USB_OHCI_HCD_PLATFORM -+#include "ohci-platform.c" -+#define PLATFORM_DRIVER ohci_platform_driver -+#endif -+ - #if !defined(PCI_DRIVER) && \ - !defined(PLATFORM_DRIVER) && \ - !defined(OMAP1_PLATFORM_DRIVER) && \ ---- /dev/null -+++ b/drivers/usb/host/ohci-platform.c -@@ -0,0 +1,194 @@ -+/* -+ * Generic platform ohci driver -+ * -+ * Copyright 2007 Michael Buesch -+ * Copyright 2011-2012 Hauke Mehrtens -+ * -+ * Derived from the OCHI-SSB driver -+ * Derived from the OHCI-PCI driver -+ * Copyright 1999 Roman Weissgaerber -+ * Copyright 2000-2002 David Brownell -+ * Copyright 1999 Linus Torvalds -+ * Copyright 1999 Gregory P. Smith -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+#include -+#include -+ -+static int ohci_platform_reset(struct usb_hcd *hcd) -+{ -+ struct platform_device *pdev = to_platform_device(hcd->self.controller); -+ struct usb_ohci_pdata *pdata = pdev->dev.platform_data; -+ struct ohci_hcd *ohci = hcd_to_ohci(hcd); -+ int err; -+ -+ if (pdata->big_endian_desc) -+ ohci->flags |= OHCI_QUIRK_BE_DESC; -+ if (pdata->big_endian_mmio) -+ ohci->flags |= OHCI_QUIRK_BE_MMIO; -+ if (pdata->no_big_frame_no) -+ ohci->flags |= OHCI_QUIRK_FRAME_NO; -+ -+ ohci_hcd_init(ohci); -+ err = ohci_init(ohci); -+ -+ return err; -+} -+ -+static int ohci_platform_start(struct usb_hcd *hcd) -+{ -+ struct ohci_hcd *ohci = hcd_to_ohci(hcd); -+ int err; -+ -+ err = ohci_run(ohci); -+ if (err < 0) { -+ ohci_err(ohci, "can't start\n"); -+ ohci_stop(hcd); -+ } -+ -+ return err; -+} -+ -+static const struct hc_driver ohci_platform_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "Generic Platform OHCI Controller", -+ .hcd_priv_size = sizeof(struct ohci_hcd), -+ -+ .irq = ohci_irq, -+ .flags = HCD_MEMORY | HCD_USB11, -+ -+ .reset = ohci_platform_reset, -+ .start = ohci_platform_start, -+ .stop = ohci_stop, -+ .shutdown = ohci_shutdown, -+ -+ .urb_enqueue = ohci_urb_enqueue, -+ .urb_dequeue = ohci_urb_dequeue, -+ .endpoint_disable = ohci_endpoint_disable, -+ -+ .get_frame_number = ohci_get_frame, -+ -+ .hub_status_data = ohci_hub_status_data, -+ .hub_control = ohci_hub_control, -+#ifdef CONFIG_PM -+ .bus_suspend = ohci_bus_suspend, -+ .bus_resume = ohci_bus_resume, -+#endif -+ -+ .start_port_reset = ohci_start_port_reset, -+}; -+ -+static int __devinit ohci_platform_probe(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd; -+ struct resource *res_mem; -+ int irq; -+ int err = -ENOMEM; -+ -+ BUG_ON(!dev->dev.platform_data); -+ -+ if (usb_disabled()) -+ return -ENODEV; -+ -+ irq = platform_get_irq(dev, 0); -+ if (irq < 0) { -+ pr_err("no irq provieded"); -+ return irq; -+ } -+ -+ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); -+ if (!res_mem) { -+ pr_err("no memory recourse provieded"); -+ return -ENXIO; -+ } -+ -+ hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, -+ dev_name(&dev->dev)); -+ if (!hcd) -+ return -ENOMEM; -+ -+ hcd->rsrc_start = res_mem->start; -+ hcd->rsrc_len = resource_size(res_mem); -+ -+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { -+ pr_err("controller already in use"); -+ err = -EBUSY; -+ goto err_put_hcd; -+ } -+ -+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) -+ goto err_release_region; -+ err = usb_add_hcd(hcd, irq, IRQF_SHARED); -+ if (err) -+ goto err_iounmap; -+ -+ platform_set_drvdata(dev, hcd); -+ -+ return err; -+ -+err_iounmap: -+ iounmap(hcd->regs); -+err_release_region: -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+err_put_hcd: -+ usb_put_hcd(hcd); -+ return err; -+} -+ -+static int __devexit ohci_platform_remove(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(dev); -+ -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ usb_put_hcd(hcd); -+ platform_set_drvdata(dev, NULL); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+ -+static int ohci_platform_suspend(struct device *dev) -+{ -+ return 0; -+} -+ -+static int ohci_platform_resume(struct device *dev) -+{ -+ struct usb_hcd *hcd = dev_get_drvdata(dev); -+ -+ ohci_finish_controller_resume(hcd); -+ return 0; -+} -+ -+#else /* !CONFIG_PM */ -+#define ohci_platform_suspend NULL -+#define ohci_platform_resume NULL -+#endif /* CONFIG_PM */ -+ -+static const struct platform_device_id ohci_platform_table[] = { -+ { "ohci-platform", 0 }, -+ { } -+}; -+MODULE_DEVICE_TABLE(platform, ohci_platform_table); -+ -+static const struct dev_pm_ops ohci_platform_pm_ops = { -+ .suspend = ohci_platform_suspend, -+ .resume = ohci_platform_resume, -+}; -+ -+static struct platform_driver ohci_platform_driver = { -+ .id_table = ohci_platform_table, -+ .probe = ohci_platform_probe, -+ .remove = __devexit_p(ohci_platform_remove), -+ .shutdown = usb_hcd_platform_shutdown, -+ .driver = { -+ .owner = THIS_MODULE, -+ .name = "ohci-platform", -+ .pm = &ohci_platform_pm_ops, -+ } -+}; ---- /dev/null -+++ b/include/linux/usb/ohci_pdriver.h -@@ -0,0 +1,38 @@ -+/* -+ * Copyright (C) 2012 Hauke Mehrtens -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software Foundation, -+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#ifndef __USB_CORE_OHCI_PDRIVER_H -+#define __USB_CORE_OHCI_PDRIVER_H -+ -+/** -+ * struct usb_ohci_pdata - platform_data for generic ohci driver -+ * -+ * @big_endian_desc: BE descriptors -+ * @big_endian_mmio: BE registers -+ * @no_big_frame_no: no big endian frame_no shift -+ * -+ * These are general configuration options for the OHCI controller. All of -+ * these options are activating more or less workarounds for some hardware. -+ */ -+struct usb_ohci_pdata { -+ unsigned big_endian_desc:1; -+ unsigned big_endian_mmio:1; -+ unsigned no_big_frame_no:1; -+}; -+ -+#endif /* __USB_CORE_OHCI_PDRIVER_H */ diff --git a/target/linux/generic/patches-3.3/082-USB-EHCI-Add-a-generic-platform-device-driver.patch b/target/linux/generic/patches-3.3/082-USB-EHCI-Add-a-generic-platform-device-driver.patch deleted file mode 100644 index 62eb87a8a1..0000000000 --- a/target/linux/generic/patches-3.3/082-USB-EHCI-Add-a-generic-platform-device-driver.patch +++ /dev/null @@ -1,283 +0,0 @@ ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -403,6 +403,16 @@ config USB_OHCI_HCD_PLATFORM - - If unsure, say N. - -+config USB_EHCI_HCD_PLATFORM -+ bool "Generic EHCI driver for a platform device" -+ depends on USB_EHCI_HCD && EXPERIMENTAL -+ default n -+ ---help--- -+ Adds an EHCI host driver for a generic platform device, which -+ provieds a memory space and an irq. -+ -+ If unsure, say N. -+ - config USB_OHCI_BIG_ENDIAN_DESC - bool - depends on USB_OHCI_HCD ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1381,6 +1381,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ehci_mv_driver - #endif - -+#ifdef CONFIG_USB_EHCI_HCD_PLATFORM -+#include "ehci-platform.c" -+#define PLATFORM_DRIVER ehci_platform_driver -+#endif -+ - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ - !defined(XILINX_OF_PLATFORM_DRIVER) ---- /dev/null -+++ b/drivers/usb/host/ehci-platform.c -@@ -0,0 +1,198 @@ -+/* -+ * Generic platform ehci driver -+ * -+ * Copyright 2007 Steven Brown -+ * Copyright 2010-2012 Hauke Mehrtens -+ * -+ * Derived from the ohci-ssb driver -+ * Copyright 2007 Michael Buesch -+ * -+ * Derived from the EHCI-PCI driver -+ * Copyright (c) 2000-2004 by David Brownell -+ * -+ * Derived from the ohci-pci driver -+ * Copyright 1999 Roman Weissgaerber -+ * Copyright 2000-2002 David Brownell -+ * Copyright 1999 Linus Torvalds -+ * Copyright 1999 Gregory P. Smith -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+#include -+#include -+ -+static int ehci_platform_reset(struct usb_hcd *hcd) -+{ -+ struct platform_device *pdev = to_platform_device(hcd->self.controller); -+ struct usb_ehci_pdata *pdata = pdev->dev.platform_data; -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); -+ int retval; -+ -+ hcd->has_tt = pdata->has_tt; -+ ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug; -+ ehci->big_endian_desc = pdata->big_endian_desc; -+ ehci->big_endian_mmio = pdata->big_endian_mmio; -+ -+ ehci->caps = hcd->regs + pdata->caps_offset; -+ retval = ehci_setup(hcd); -+ if (retval) -+ return retval; -+ -+ if (pdata->port_power_on) -+ ehci_port_power(ehci, 1); -+ if (pdata->port_power_off) -+ ehci_port_power(ehci, 0); -+ -+ return 0; -+} -+ -+static const struct hc_driver ehci_platform_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "Generic Platform EHCI Controller", -+ .hcd_priv_size = sizeof(struct ehci_hcd), -+ -+ .irq = ehci_irq, -+ .flags = HCD_MEMORY | HCD_USB2, -+ -+ .reset = ehci_platform_reset, -+ .start = ehci_run, -+ .stop = ehci_stop, -+ .shutdown = ehci_shutdown, -+ -+ .urb_enqueue = ehci_urb_enqueue, -+ .urb_dequeue = ehci_urb_dequeue, -+ .endpoint_disable = ehci_endpoint_disable, -+ .endpoint_reset = ehci_endpoint_reset, -+ -+ .get_frame_number = ehci_get_frame, -+ -+ .hub_status_data = ehci_hub_status_data, -+ .hub_control = ehci_hub_control, -+#if defined(CONFIG_PM) -+ .bus_suspend = ehci_bus_suspend, -+ .bus_resume = ehci_bus_resume, -+#endif -+ .relinquish_port = ehci_relinquish_port, -+ .port_handed_over = ehci_port_handed_over, -+ -+ .update_device = ehci_update_device, -+ -+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -+}; -+ -+static int __devinit ehci_platform_probe(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd; -+ struct resource *res_mem; -+ int irq; -+ int err = -ENOMEM; -+ -+ BUG_ON(!dev->dev.platform_data); -+ -+ if (usb_disabled()) -+ return -ENODEV; -+ -+ irq = platform_get_irq(dev, 0); -+ if (irq < 0) { -+ pr_err("no irq provieded"); -+ return irq; -+ } -+ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); -+ if (!res_mem) { -+ pr_err("no memory recourse provieded"); -+ return -ENXIO; -+ } -+ -+ hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, -+ dev_name(&dev->dev)); -+ if (!hcd) -+ return -ENOMEM; -+ -+ hcd->rsrc_start = res_mem->start; -+ hcd->rsrc_len = resource_size(res_mem); -+ -+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { -+ pr_err("controller already in use"); -+ err = -EBUSY; -+ goto err_put_hcd; -+ } -+ -+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) -+ goto err_release_region; -+ err = usb_add_hcd(hcd, irq, IRQF_SHARED); -+ if (err) -+ goto err_iounmap; -+ -+ platform_set_drvdata(dev, hcd); -+ -+ return err; -+ -+err_iounmap: -+ iounmap(hcd->regs); -+err_release_region: -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+err_put_hcd: -+ usb_put_hcd(hcd); -+ return err; -+} -+ -+static int __devexit ehci_platform_remove(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(dev); -+ -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ usb_put_hcd(hcd); -+ platform_set_drvdata(dev, NULL); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+ -+static int ehci_platform_suspend(struct device *dev) -+{ -+ struct usb_hcd *hcd = dev_get_drvdata(dev); -+ bool wakeup = device_may_wakeup(dev); -+ -+ ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), wakeup); -+ return 0; -+} -+ -+static int ehci_platform_resume(struct device *dev) -+{ -+ struct usb_hcd *hcd = dev_get_drvdata(dev); -+ -+ ehci_prepare_ports_for_controller_resume(hcd_to_ehci(hcd)); -+ return 0; -+} -+ -+#else /* !CONFIG_PM */ -+#define ehci_platform_suspend NULL -+#define ehci_platform_resume NULL -+#endif /* CONFIG_PM */ -+ -+static const struct platform_device_id ehci_platform_table[] = { -+ { "ehci-platform", 0 }, -+ { } -+}; -+MODULE_DEVICE_TABLE(platform, ehci_platform_table); -+ -+static const struct dev_pm_ops ehci_platform_pm_ops = { -+ .suspend = ehci_platform_suspend, -+ .resume = ehci_platform_resume, -+}; -+ -+static struct platform_driver ehci_platform_driver = { -+ .id_table = ehci_platform_table, -+ .probe = ehci_platform_probe, -+ .remove = __devexit_p(ehci_platform_remove), -+ .shutdown = usb_hcd_platform_shutdown, -+ .driver = { -+ .owner = THIS_MODULE, -+ .name = "ehci-platform", -+ .pm = &ehci_platform_pm_ops, -+ } -+}; ---- /dev/null -+++ b/include/linux/usb/ehci_pdriver.h -@@ -0,0 +1,46 @@ -+/* -+ * Copyright (C) 2012 Hauke Mehrtens -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software Foundation, -+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#ifndef __USB_CORE_EHCI_PDRIVER_H -+#define __USB_CORE_EHCI_PDRIVER_H -+ -+/** -+ * struct usb_ehci_pdata - platform_data for generic ehci driver -+ * -+ * @caps_offset: offset of the EHCI Capability Registers to the start of -+ * the io memory region provided to the driver. -+ * @has_tt: set to 1 if TT is integrated in root hub. -+ * @port_power_on: set to 1 if the controller needs a power up after -+ * initialization. -+ * @port_power_off: set to 1 if the controller needs to be powered down -+ * after initialization. -+ * -+ * These are general configuration options for the EHCI controller. All of -+ * these options are activating more or less workarounds for some hardware. -+ */ -+struct usb_ehci_pdata { -+ int caps_offset; -+ unsigned has_tt:1; -+ unsigned has_synopsys_hc_bug:1; -+ unsigned big_endian_desc:1; -+ unsigned big_endian_mmio:1; -+ unsigned port_power_on:1; -+ unsigned port_power_off:1; -+}; -+ -+#endif /* __USB_CORE_EHCI_PDRIVER_H */ diff --git a/target/linux/generic/patches-3.3/083-USB-EHCI-platform-remove-update.patch b/target/linux/generic/patches-3.3/083-USB-EHCI-platform-remove-update.patch deleted file mode 100644 index e9a5b70054..0000000000 --- a/target/linux/generic/patches-3.3/083-USB-EHCI-platform-remove-update.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/usb/host/ehci-platform.c -+++ b/drivers/usb/host/ehci-platform.c -@@ -75,8 +75,6 @@ static const struct hc_driver ehci_platf - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - -- .update_device = ehci_update_device, -- - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, - }; - diff --git a/target/linux/generic/patches-3.3/084-x86_fix_perf_uclibc_build.patch b/target/linux/generic/patches-3.3/084-x86_fix_perf_uclibc_build.patch deleted file mode 100644 index 95163a43ae..0000000000 --- a/target/linux/generic/patches-3.3/084-x86_fix_perf_uclibc_build.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 031d8ad2c3cee85c515e551fc8c0054bdedb7b8b Mon Sep 17 00:00:00 2001 -From: Florian Fainelli -Date: Thu, 13 Dec 2012 18:02:11 +0100 -Subject: [PATCH] x86: fix perf build with uclibc toolchains - -libio.h is not provided by uClibc, in order to be able to test the -definition of __UCLIBC__ we need to include stdlib.h, which also -includes stddef.h, providing the definition of 'NULL' - -Signed-off-by: Florian Fainelli ---- - tools/perf/arch/x86/util/dwarf-regs.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/tools/perf/arch/x86/util/dwarf-regs.c -+++ b/tools/perf/arch/x86/util/dwarf-regs.c -@@ -20,7 +20,10 @@ - * - */ - -+#include -+#ifndef __UCLIBC__ - #include -+#endif - #include - - /* diff --git a/target/linux/generic/patches-3.3/090-CVE-2013-1763.patch b/target/linux/generic/patches-3.3/090-CVE-2013-1763.patch deleted file mode 100644 index 6c0c2236dd..0000000000 --- a/target/linux/generic/patches-3.3/090-CVE-2013-1763.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 6e601a53566d84e1ffd25e7b6fe0b6894ffd79c0 Mon Sep 17 00:00:00 2001 -From: Mathias Krause -Date: Sat, 23 Feb 2013 01:13:47 +0000 -Subject: sock_diag: Fix out-of-bounds access to sock_diag_handlers[] - -Userland can send a netlink message requesting SOCK_DIAG_BY_FAMILY -with a family greater or equal then AF_MAX -- the array size of -sock_diag_handlers[]. The current code does not test for this -condition therefore is vulnerable to an out-of-bound access opening -doors for a privilege escalation. - -Signed-off-by: Mathias Krause -Acked-by: Eric Dumazet -Signed-off-by: David S. Miller ---- ---- a/net/core/sock_diag.c -+++ b/net/core/sock_diag.c -@@ -126,6 +126,9 @@ static int __sock_diag_rcv_msg(struct sk - if (nlmsg_len(nlh) < sizeof(*req)) - return -EINVAL; - -+ if (req->sdiag_family >= AF_MAX) -+ return -EINVAL; -+ - hndl = sock_diag_lock_handler(req->sdiag_family); - if (hndl == NULL) - err = -ENOENT; diff --git a/target/linux/generic/patches-3.3/100-overlayfs_v12.patch b/target/linux/generic/patches-3.3/100-overlayfs_v12.patch deleted file mode 100644 index 14e655897b..0000000000 --- a/target/linux/generic/patches-3.3/100-overlayfs_v12.patch +++ /dev/null @@ -1,3232 +0,0 @@ ---- a/Documentation/filesystems/Locking -+++ b/Documentation/filesystems/Locking -@@ -62,6 +62,7 @@ ata *); - int (*removexattr) (struct dentry *, const char *); - void (*truncate_range)(struct inode *, loff_t, loff_t); - int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len); -+ struct file *(*open)(struct dentry *,struct file *,const struct cred *); - - locking rules: - all may block -@@ -89,6 +90,7 @@ listxattr: no - removexattr: yes - truncate_range: yes - fiemap: no -+open: no - Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on - victim. - cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem. ---- /dev/null -+++ b/Documentation/filesystems/overlayfs.txt -@@ -0,0 +1,199 @@ -+Written by: Neil Brown -+ -+Overlay Filesystem -+================== -+ -+This document describes a prototype for a new approach to providing -+overlay-filesystem functionality in Linux (sometimes referred to as -+union-filesystems). An overlay-filesystem tries to present a -+filesystem which is the result over overlaying one filesystem on top -+of the other. -+ -+The result will inevitably fail to look exactly like a normal -+filesystem for various technical reasons. The expectation is that -+many use cases will be able to ignore these differences. -+ -+This approach is 'hybrid' because the objects that appear in the -+filesystem do not all appear to belong to that filesystem. In many -+cases an object accessed in the union will be indistinguishable -+from accessing the corresponding object from the original filesystem. -+This is most obvious from the 'st_dev' field returned by stat(2). -+ -+While directories will report an st_dev from the overlay-filesystem, -+all non-directory objects will report an st_dev from the lower or -+upper filesystem that is providing the object. Similarly st_ino will -+only be unique when combined with st_dev, and both of these can change -+over the lifetime of a non-directory object. Many applications and -+tools ignore these values and will not be affected. -+ -+Upper and Lower -+--------------- -+ -+An overlay filesystem combines two filesystems - an 'upper' filesystem -+and a 'lower' filesystem. When a name exists in both filesystems, the -+object in the 'upper' filesystem is visible while the object in the -+'lower' filesystem is either hidden or, in the case of directories, -+merged with the 'upper' object. -+ -+It would be more correct to refer to an upper and lower 'directory -+tree' rather than 'filesystem' as it is quite possible for both -+directory trees to be in the same filesystem and there is no -+requirement that the root of a filesystem be given for either upper or -+lower. -+ -+The lower filesystem can be any filesystem supported by Linux and does -+not need to be writable. The lower filesystem can even be another -+overlayfs. The upper filesystem will normally be writable and if it -+is it must support the creation of trusted.* extended attributes, and -+must provide valid d_type in readdir responses, at least for symbolic -+links - so NFS is not suitable. -+ -+A read-only overlay of two read-only filesystems may use any -+filesystem type. -+ -+Directories -+----------- -+ -+Overlaying mainly involved directories. If a given name appears in both -+upper and lower filesystems and refers to a non-directory in either, -+then the lower object is hidden - the name refers only to the upper -+object. -+ -+Where both upper and lower objects are directories, a merged directory -+is formed. -+ -+At mount time, the two directories given as mount options are combined -+into a merged directory: -+ -+ mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper /overlay -+ -+Then whenever a lookup is requested in such a merged directory, the -+lookup is performed in each actual directory and the combined result -+is cached in the dentry belonging to the overlay filesystem. If both -+actual lookups find directories, both are stored and a merged -+directory is created, otherwise only one is stored: the upper if it -+exists, else the lower. -+ -+Only the lists of names from directories are merged. Other content -+such as metadata and extended attributes are reported for the upper -+directory only. These attributes of the lower directory are hidden. -+ -+whiteouts and opaque directories -+-------------------------------- -+ -+In order to support rm and rmdir without changing the lower -+filesystem, an overlay filesystem needs to record in the upper filesystem -+that files have been removed. This is done using whiteouts and opaque -+directories (non-directories are always opaque). -+ -+The overlay filesystem uses extended attributes with a -+"trusted.overlay." prefix to record these details. -+ -+A whiteout is created as a symbolic link with target -+"(overlay-whiteout)" and with xattr "trusted.overlay.whiteout" set to "y". -+When a whiteout is found in the upper level of a merged directory, any -+matching name in the lower level is ignored, and the whiteout itself -+is also hidden. -+ -+A directory is made opaque by setting the xattr "trusted.overlay.opaque" -+to "y". Where the upper filesystem contains an opaque directory, any -+directory in the lower filesystem with the same name is ignored. -+ -+readdir -+------- -+ -+When a 'readdir' request is made on a merged directory, the upper and -+lower directories are each read and the name lists merged in the -+obvious way (upper is read first, then lower - entries that already -+exist are not re-added). This merged name list is cached in the -+'struct file' and so remains as long as the file is kept open. If the -+directory is opened and read by two processes at the same time, they -+will each have separate caches. A seekdir to the start of the -+directory (offset 0) followed by a readdir will cause the cache to be -+discarded and rebuilt. -+ -+This means that changes to the merged directory do not appear while a -+directory is being read. This is unlikely to be noticed by many -+programs. -+ -+seek offsets are assigned sequentially when the directories are read. -+Thus if -+ - read part of a directory -+ - remember an offset, and close the directory -+ - re-open the directory some time later -+ - seek to the remembered offset -+ -+there may be little correlation between the old and new locations in -+the list of filenames, particularly if anything has changed in the -+directory. -+ -+Readdir on directories that are not merged is simply handled by the -+underlying directory (upper or lower). -+ -+ -+Non-directories -+--------------- -+ -+Objects that are not directories (files, symlinks, device-special -+files etc.) are presented either from the upper or lower filesystem as -+appropriate. When a file in the lower filesystem is accessed in a way -+the requires write-access, such as opening for write access, changing -+some metadata etc., the file is first copied from the lower filesystem -+to the upper filesystem (copy_up). Note that creating a hard-link -+also requires copy_up, though of course creation of a symlink does -+not. -+ -+The copy_up may turn out to be unnecessary, for example if the file is -+opened for read-write but the data is not modified. -+ -+The copy_up process first makes sure that the containing directory -+exists in the upper filesystem - creating it and any parents as -+necessary. It then creates the object with the same metadata (owner, -+mode, mtime, symlink-target etc.) and then if the object is a file, the -+data is copied from the lower to the upper filesystem. Finally any -+extended attributes are copied up. -+ -+Once the copy_up is complete, the overlay filesystem simply -+provides direct access to the newly created file in the upper -+filesystem - future operations on the file are barely noticed by the -+overlay filesystem (though an operation on the name of the file such as -+rename or unlink will of course be noticed and handled). -+ -+ -+Non-standard behavior -+--------------------- -+ -+The copy_up operation essentially creates a new, identical file and -+moves it over to the old name. The new file may be on a different -+filesystem, so both st_dev and st_ino of the file may change. -+ -+Any open files referring to this inode will access the old data and -+metadata. Similarly any file locks obtained before copy_up will not -+apply to the copied up file. -+ -+On a file is opened with O_RDONLY fchmod(2), fchown(2), futimesat(2) -+and fsetxattr(2) will fail with EROFS. -+ -+If a file with multiple hard links is copied up, then this will -+"break" the link. Changes will not be propagated to other names -+referring to the same inode. -+ -+Symlinks in /proc/PID/ and /proc/PID/fd which point to a non-directory -+object in overlayfs will not contain vaid absolute paths, only -+relative paths leading up to the filesystem's root. This will be -+fixed in the future. -+ -+Some operations are not atomic, for example a crash during copy_up or -+rename will leave the filesystem in an inconsitent state. This will -+be addressed in the future. -+ -+Changes to underlying filesystems -+--------------------------------- -+ -+Offline changes, when the overlay is not mounted, are allowed to either -+the upper or the lower trees. -+ -+Changes to the underlying filesystems while part of a mounted overlay -+filesystem are not allowed. If the underlying filesystem is changed, -+the behavior of the overlay is undefined, though it will not result in -+a crash or deadlock. ---- a/Documentation/filesystems/vfs.txt -+++ b/Documentation/filesystems/vfs.txt -@@ -364,6 +364,8 @@ struct inode_operations { - ssize_t (*listxattr) (struct dentry *, char *, size_t); - int (*removexattr) (struct dentry *, const char *); - void (*truncate_range)(struct inode *, loff_t, loff_t); -+ struct file *(*open) (struct dentry *, struct file *, -+ const struct cred *); - }; - - Again, all methods are called without any locks being held, unless -@@ -475,6 +477,12 @@ otherwise noted. - truncate_range: a method provided by the underlying filesystem to truncate a - range of blocks , i.e. punch a hole somewhere in a file. - -+ open: this is an alternative to f_op->open(), the difference is that this -+ method may return any open file, not necessarily originating from the -+ same filesystem as the one i_op->open() was called on. It may be useful -+ for stacking filesystems which want to allow native I/O directly on -+ underlying files. -+ - - The Address Space Object - ======================== ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -4955,6 +4955,13 @@ F: drivers/scsi/osd/ - F: include/scsi/osd_* - F: fs/exofs/ - -+OVERLAYFS FILESYSTEM -+M: Miklos Szeredi -+L: linux-fsdevel@vger.kernel.org -+S: Supported -+F: fs/overlayfs/* -+F: Documentation/filesystems/overlayfs.txt -+ - P54 WIRELESS DRIVER - M: Christian Lamparter - L: linux-wireless@vger.kernel.org ---- a/fs/Kconfig -+++ b/fs/Kconfig -@@ -63,6 +63,7 @@ source "fs/quota/Kconfig" - - source "fs/autofs4/Kconfig" - source "fs/fuse/Kconfig" -+source "fs/overlayfs/Kconfig" - - config CUSE - tristate "Character device in Userspace support" ---- a/fs/Makefile -+++ b/fs/Makefile -@@ -105,6 +105,7 @@ obj-$(CONFIG_QNX4FS_FS) += qnx4/ - obj-$(CONFIG_AUTOFS4_FS) += autofs4/ - obj-$(CONFIG_ADFS_FS) += adfs/ - obj-$(CONFIG_FUSE_FS) += fuse/ -+obj-$(CONFIG_OVERLAYFS_FS) += overlayfs/ - obj-$(CONFIG_UDF_FS) += udf/ - obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/ - obj-$(CONFIG_OMFS_FS) += omfs/ ---- a/fs/ecryptfs/main.c -+++ b/fs/ecryptfs/main.c -@@ -544,6 +544,13 @@ static struct dentry *ecryptfs_mount(str - s->s_maxbytes = path.dentry->d_sb->s_maxbytes; - s->s_blocksize = path.dentry->d_sb->s_blocksize; - s->s_magic = ECRYPTFS_SUPER_MAGIC; -+ s->s_stack_depth = path.dentry->d_sb->s_stack_depth + 1; -+ -+ rc = -EINVAL; -+ if (s->s_stack_depth > FILESYSTEM_MAX_STACK_DEPTH) { -+ printk(KERN_ERR "eCryptfs: maximum fs stacking depth exceeded\n"); -+ goto out_free; -+ } - - inode = ecryptfs_get_inode(path.dentry->d_inode, s); - rc = PTR_ERR(inode); ---- a/fs/namespace.c -+++ b/fs/namespace.c -@@ -1325,6 +1325,24 @@ void drop_collected_mounts(struct vfsmou - release_mounts(&umount_list); - } - -+struct vfsmount *clone_private_mount(struct path *path) -+{ -+ struct mount *old_mnt = real_mount(path->mnt); -+ struct mount *new_mnt; -+ -+ if (IS_MNT_UNBINDABLE(old_mnt)) -+ return ERR_PTR(-EINVAL); -+ -+ down_read(&namespace_sem); -+ new_mnt = clone_mnt(old_mnt, path->dentry, CL_PRIVATE); -+ up_read(&namespace_sem); -+ if (!new_mnt) -+ return ERR_PTR(-ENOMEM); -+ -+ return &new_mnt->mnt; -+} -+EXPORT_SYMBOL_GPL(clone_private_mount); -+ - int iterate_mounts(int (*f)(struct vfsmount *, void *), void *arg, - struct vfsmount *root) - { ---- a/fs/open.c -+++ b/fs/open.c -@@ -644,24 +644,24 @@ static inline int __get_file_write_acces - return error; - } - --static struct file *__dentry_open(struct dentry *dentry, struct vfsmount *mnt, -- struct file *f, -- int (*open)(struct inode *, struct file *), -- const struct cred *cred) -+static struct file *__dentry_open(struct path *path, struct file *f, -+ int (*open)(struct inode *, struct file *), -+ const struct cred *cred) - { - static const struct file_operations empty_fops = {}; - struct inode *inode; - int error; - -+ path_get(path); - f->f_mode = OPEN_FMODE(f->f_flags) | FMODE_LSEEK | - FMODE_PREAD | FMODE_PWRITE; - - if (unlikely(f->f_flags & O_PATH)) - f->f_mode = FMODE_PATH; - -- inode = dentry->d_inode; -+ inode = path->dentry->d_inode; - if (f->f_mode & FMODE_WRITE) { -- error = __get_file_write_access(inode, mnt); -+ error = __get_file_write_access(inode, path->mnt); - if (error) - goto cleanup_file; - if (!special_file(inode->i_mode)) -@@ -669,8 +669,7 @@ static struct file *__dentry_open(struct - } - - f->f_mapping = inode->i_mapping; -- f->f_path.dentry = dentry; -- f->f_path.mnt = mnt; -+ f->f_path = *path; - f->f_pos = 0; - file_sb_list_add(f, inode->i_sb); - -@@ -727,7 +726,7 @@ cleanup_all: - * here, so just reset the state. - */ - file_reset_write(f); -- mnt_drop_write(mnt); -+ mnt_drop_write(path->mnt); - } - } - file_sb_list_del(f); -@@ -735,8 +734,7 @@ cleanup_all: - f->f_path.mnt = NULL; - cleanup_file: - put_filp(f); -- dput(dentry); -- mntput(mnt); -+ path_put(path); - return ERR_PTR(error); - } - -@@ -762,14 +760,14 @@ cleanup_file: - struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry, - int (*open)(struct inode *, struct file *)) - { -+ struct path path = { .dentry = dentry, .mnt = nd->path.mnt }; - const struct cred *cred = current_cred(); - - if (IS_ERR(nd->intent.open.file)) - goto out; - if (IS_ERR(dentry)) - goto out_err; -- nd->intent.open.file = __dentry_open(dget(dentry), mntget(nd->path.mnt), -- nd->intent.open.file, -+ nd->intent.open.file = __dentry_open(&path, nd->intent.open.file, - open, cred); - out: - return nd->intent.open.file; -@@ -797,11 +795,9 @@ struct file *nameidata_to_filp(struct na - nd->intent.open.file = NULL; - - /* Has the filesystem initialised the file for us? */ -- if (filp->f_path.dentry == NULL) { -- path_get(&nd->path); -- filp = __dentry_open(nd->path.dentry, nd->path.mnt, filp, -- NULL, cred); -- } -+ if (filp->f_path.dentry == NULL) -+ filp = vfs_open(&nd->path, filp, cred); -+ - return filp; - } - -@@ -812,27 +808,48 @@ struct file *nameidata_to_filp(struct na - struct file *dentry_open(struct dentry *dentry, struct vfsmount *mnt, int flags, - const struct cred *cred) - { -- int error; - struct file *f; -+ struct file *ret; -+ struct path path = { .dentry = dentry, .mnt = mnt }; - - validate_creds(cred); - - /* We must always pass in a valid mount pointer. */ - BUG_ON(!mnt); - -- error = -ENFILE; -+ ret = ERR_PTR(-ENFILE); - f = get_empty_filp(); -- if (f == NULL) { -- dput(dentry); -- mntput(mnt); -- return ERR_PTR(error); -+ if (f != NULL) { -+ f->f_flags = flags; -+ ret = vfs_open(&path, f, cred); - } -+ path_put(&path); - -- f->f_flags = flags; -- return __dentry_open(dentry, mnt, f, NULL, cred); -+ return ret; - } - EXPORT_SYMBOL(dentry_open); - -+/** -+ * vfs_open - open the file at the given path -+ * @path: path to open -+ * @filp: newly allocated file with f_flag initialized -+ * @cred: credentials to use -+ * -+ * Open the file. If successful, the returned file will have acquired -+ * an additional reference for path. -+ */ -+struct file *vfs_open(struct path *path, struct file *filp, -+ const struct cred *cred) -+{ -+ struct inode *inode = path->dentry->d_inode; -+ -+ if (inode->i_op->open) -+ return inode->i_op->open(path->dentry, filp, cred); -+ else -+ return __dentry_open(path, filp, NULL, cred); -+} -+EXPORT_SYMBOL(vfs_open); -+ - static void __put_unused_fd(struct files_struct *files, unsigned int fd) - { - struct fdtable *fdt = files_fdtable(files); ---- /dev/null -+++ b/fs/overlayfs/Kconfig -@@ -0,0 +1,4 @@ -+config OVERLAYFS_FS -+ tristate "Overlay filesystem support" -+ help -+ Add support for overlay filesystem. ---- /dev/null -+++ b/fs/overlayfs/Makefile -@@ -0,0 +1,7 @@ -+# -+# Makefile for the overlay filesystem. -+# -+ -+obj-$(CONFIG_OVERLAYFS_FS) += overlayfs.o -+ -+overlayfs-objs := super.o inode.o dir.o readdir.o copy_up.o ---- /dev/null -+++ b/fs/overlayfs/copy_up.c -@@ -0,0 +1,384 @@ -+/* -+ * -+ * Copyright (C) 2011 Novell Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "overlayfs.h" -+ -+#define OVL_COPY_UP_CHUNK_SIZE (1 << 20) -+ -+static int ovl_copy_up_xattr(struct dentry *old, struct dentry *new) -+{ -+ ssize_t list_size, size; -+ char *buf, *name, *value; -+ int error; -+ -+ if (!old->d_inode->i_op->getxattr || -+ !new->d_inode->i_op->getxattr) -+ return 0; -+ -+ list_size = vfs_listxattr(old, NULL, 0); -+ if (list_size <= 0) { -+ if (list_size == -EOPNOTSUPP) -+ return 0; -+ return list_size; -+ } -+ -+ buf = kzalloc(list_size, GFP_KERNEL); -+ if (!buf) -+ return -ENOMEM; -+ -+ error = -ENOMEM; -+ value = kmalloc(XATTR_SIZE_MAX, GFP_KERNEL); -+ if (!value) -+ goto out; -+ -+ list_size = vfs_listxattr(old, buf, list_size); -+ if (list_size <= 0) { -+ error = list_size; -+ goto out_free_value; -+ } -+ -+ for (name = buf; name < (buf + list_size); name += strlen(name) + 1) { -+ size = vfs_getxattr(old, name, value, XATTR_SIZE_MAX); -+ if (size <= 0) { -+ error = size; -+ goto out_free_value; -+ } -+ error = vfs_setxattr(new, name, value, size, 0); -+ if (error) -+ goto out_free_value; -+ } -+ -+out_free_value: -+ kfree(value); -+out: -+ kfree(buf); -+ return error; -+} -+ -+static int ovl_copy_up_data(struct path *old, struct path *new, loff_t len) -+{ -+ struct file *old_file; -+ struct file *new_file; -+ int error = 0; -+ -+ if (len == 0) -+ return 0; -+ -+ old_file = ovl_path_open(old, O_RDONLY); -+ if (IS_ERR(old_file)) -+ return PTR_ERR(old_file); -+ -+ new_file = ovl_path_open(new, O_WRONLY); -+ if (IS_ERR(new_file)) { -+ error = PTR_ERR(new_file); -+ goto out_fput; -+ } -+ -+ /* FIXME: copy up sparse files efficiently */ -+ while (len) { -+ loff_t offset = new_file->f_pos; -+ size_t this_len = OVL_COPY_UP_CHUNK_SIZE; -+ long bytes; -+ -+ if (len < this_len) -+ this_len = len; -+ -+ if (signal_pending_state(TASK_KILLABLE, current)) { -+ error = -EINTR; -+ break; -+ } -+ -+ bytes = do_splice_direct(old_file, &offset, new_file, this_len, -+ SPLICE_F_MOVE); -+ if (bytes <= 0) { -+ error = bytes; -+ break; -+ } -+ -+ len -= bytes; -+ } -+ -+ fput(new_file); -+out_fput: -+ fput(old_file); -+ return error; -+} -+ -+static char *ovl_read_symlink(struct dentry *realdentry) -+{ -+ int res; -+ char *buf; -+ struct inode *inode = realdentry->d_inode; -+ mm_segment_t old_fs; -+ -+ res = -EINVAL; -+ if (!inode->i_op->readlink) -+ goto err; -+ -+ res = -ENOMEM; -+ buf = (char *) __get_free_page(GFP_KERNEL); -+ if (!buf) -+ goto err; -+ -+ old_fs = get_fs(); -+ set_fs(get_ds()); -+ /* The cast to a user pointer is valid due to the set_fs() */ -+ res = inode->i_op->readlink(realdentry, -+ (char __user *)buf, PAGE_SIZE - 1); -+ set_fs(old_fs); -+ if (res < 0) { -+ free_page((unsigned long) buf); -+ goto err; -+ } -+ buf[res] = '\0'; -+ -+ return buf; -+ -+err: -+ return ERR_PTR(res); -+} -+ -+static int ovl_set_timestamps(struct dentry *upperdentry, struct kstat *stat) -+{ -+ struct iattr attr = { -+ .ia_valid = -+ ATTR_ATIME | ATTR_MTIME | ATTR_ATIME_SET | ATTR_MTIME_SET, -+ .ia_atime = stat->atime, -+ .ia_mtime = stat->mtime, -+ }; -+ -+ return notify_change(upperdentry, &attr); -+} -+ -+static int ovl_set_mode(struct dentry *upperdentry, umode_t mode) -+{ -+ struct iattr attr = { -+ .ia_valid = ATTR_MODE, -+ .ia_mode = mode, -+ }; -+ -+ return notify_change(upperdentry, &attr); -+} -+ -+static int ovl_copy_up_locked(struct dentry *upperdir, struct dentry *dentry, -+ struct path *lowerpath, struct kstat *stat, -+ const char *link) -+{ -+ int err; -+ struct path newpath; -+ umode_t mode = stat->mode; -+ -+ /* Can't properly set mode on creation because of the umask */ -+ stat->mode &= S_IFMT; -+ -+ ovl_path_upper(dentry, &newpath); -+ WARN_ON(newpath.dentry); -+ newpath.dentry = ovl_upper_create(upperdir, dentry, stat, link); -+ if (IS_ERR(newpath.dentry)) -+ return PTR_ERR(newpath.dentry); -+ -+ if (S_ISREG(stat->mode)) { -+ err = ovl_copy_up_data(lowerpath, &newpath, stat->size); -+ if (err) -+ goto err_remove; -+ } -+ -+ err = ovl_copy_up_xattr(lowerpath->dentry, newpath.dentry); -+ if (err) -+ goto err_remove; -+ -+ mutex_lock(&newpath.dentry->d_inode->i_mutex); -+ if (!S_ISLNK(stat->mode)) -+ err = ovl_set_mode(newpath.dentry, mode); -+ if (!err) -+ err = ovl_set_timestamps(newpath.dentry, stat); -+ mutex_unlock(&newpath.dentry->d_inode->i_mutex); -+ if (err) -+ goto err_remove; -+ -+ ovl_dentry_update(dentry, newpath.dentry); -+ -+ /* -+ * Easiest way to get rid of the lower dentry reference is to -+ * drop this dentry. This is neither needed nor possible for -+ * directories. -+ */ -+ if (!S_ISDIR(stat->mode)) -+ d_drop(dentry); -+ -+ return 0; -+ -+err_remove: -+ if (S_ISDIR(stat->mode)) -+ vfs_rmdir(upperdir->d_inode, newpath.dentry); -+ else -+ vfs_unlink(upperdir->d_inode, newpath.dentry); -+ -+ dput(newpath.dentry); -+ -+ return err; -+} -+ -+/* -+ * Copy up a single dentry -+ * -+ * Directory renames only allowed on "pure upper" (already created on -+ * upper filesystem, never copied up). Directories which are on lower or -+ * are merged may not be renamed. For these -EXDEV is returned and -+ * userspace has to deal with it. This means, when copying up a -+ * directory we can rely on it and ancestors being stable. -+ * -+ * Non-directory renames start with copy up of source if necessary. The -+ * actual rename will only proceed once the copy up was successful. Copy -+ * up uses upper parent i_mutex for exclusion. Since rename can change -+ * d_parent it is possible that the copy up will lock the old parent. At -+ * that point the file will have already been copied up anyway. -+ */ -+static int ovl_copy_up_one(struct dentry *parent, struct dentry *dentry, -+ struct path *lowerpath, struct kstat *stat) -+{ -+ int err; -+ struct kstat pstat; -+ struct path parentpath; -+ struct dentry *upperdir; -+ const struct cred *old_cred; -+ struct cred *override_cred; -+ char *link = NULL; -+ -+ ovl_path_upper(parent, &parentpath); -+ upperdir = parentpath.dentry; -+ -+ err = vfs_getattr(parentpath.mnt, parentpath.dentry, &pstat); -+ if (err) -+ return err; -+ -+ if (S_ISLNK(stat->mode)) { -+ link = ovl_read_symlink(lowerpath->dentry); -+ if (IS_ERR(link)) -+ return PTR_ERR(link); -+ } -+ -+ err = -ENOMEM; -+ override_cred = prepare_creds(); -+ if (!override_cred) -+ goto out_free_link; -+ -+ override_cred->fsuid = stat->uid; -+ override_cred->fsgid = stat->gid; -+ /* -+ * CAP_SYS_ADMIN for copying up extended attributes -+ * CAP_DAC_OVERRIDE for create -+ * CAP_FOWNER for chmod, timestamp update -+ * CAP_FSETID for chmod -+ * CAP_MKNOD for mknod -+ */ -+ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN); -+ cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE); -+ cap_raise(override_cred->cap_effective, CAP_FOWNER); -+ cap_raise(override_cred->cap_effective, CAP_FSETID); -+ cap_raise(override_cred->cap_effective, CAP_MKNOD); -+ old_cred = override_creds(override_cred); -+ -+ mutex_lock_nested(&upperdir->d_inode->i_mutex, I_MUTEX_PARENT); -+ if (ovl_path_type(dentry) != OVL_PATH_LOWER) { -+ err = 0; -+ } else { -+ err = ovl_copy_up_locked(upperdir, dentry, lowerpath, -+ stat, link); -+ if (!err) { -+ /* Restore timestamps on parent (best effort) */ -+ ovl_set_timestamps(upperdir, &pstat); -+ } -+ } -+ -+ mutex_unlock(&upperdir->d_inode->i_mutex); -+ -+ revert_creds(old_cred); -+ put_cred(override_cred); -+ -+out_free_link: -+ if (link) -+ free_page((unsigned long) link); -+ -+ return err; -+} -+ -+int ovl_copy_up(struct dentry *dentry) -+{ -+ int err; -+ -+ err = 0; -+ while (!err) { -+ struct dentry *next; -+ struct dentry *parent; -+ struct path lowerpath; -+ struct kstat stat; -+ enum ovl_path_type type = ovl_path_type(dentry); -+ -+ if (type != OVL_PATH_LOWER) -+ break; -+ -+ next = dget(dentry); -+ /* find the topmost dentry not yet copied up */ -+ for (;;) { -+ parent = dget_parent(next); -+ -+ type = ovl_path_type(parent); -+ if (type != OVL_PATH_LOWER) -+ break; -+ -+ dput(next); -+ next = parent; -+ } -+ -+ ovl_path_lower(next, &lowerpath); -+ err = vfs_getattr(lowerpath.mnt, lowerpath.dentry, &stat); -+ if (!err) -+ err = ovl_copy_up_one(parent, next, &lowerpath, &stat); -+ -+ dput(parent); -+ dput(next); -+ } -+ -+ return err; -+} -+ -+/* Optimize by not copying up the file first and truncating later */ -+int ovl_copy_up_truncate(struct dentry *dentry, loff_t size) -+{ -+ int err; -+ struct kstat stat; -+ struct path lowerpath; -+ struct dentry *parent = dget_parent(dentry); -+ -+ err = ovl_copy_up(parent); -+ if (err) -+ goto out_dput_parent; -+ -+ ovl_path_lower(dentry, &lowerpath); -+ err = vfs_getattr(lowerpath.mnt, lowerpath.dentry, &stat); -+ if (err) -+ goto out_dput_parent; -+ -+ if (size < stat.size) -+ stat.size = size; -+ -+ err = ovl_copy_up_one(parent, dentry, &lowerpath, &stat); -+ -+out_dput_parent: -+ dput(parent); -+ return err; -+} ---- /dev/null -+++ b/fs/overlayfs/dir.c -@@ -0,0 +1,596 @@ -+/* -+ * -+ * Copyright (C) 2011 Novell Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include "overlayfs.h" -+ -+static const char *ovl_whiteout_symlink = "(overlay-whiteout)"; -+ -+static int ovl_whiteout(struct dentry *upperdir, struct dentry *dentry) -+{ -+ int err; -+ struct dentry *newdentry; -+ const struct cred *old_cred; -+ struct cred *override_cred; -+ -+ /* FIXME: recheck lower dentry to see if whiteout is really needed */ -+ -+ err = -ENOMEM; -+ override_cred = prepare_creds(); -+ if (!override_cred) -+ goto out; -+ -+ /* -+ * CAP_SYS_ADMIN for setxattr -+ * CAP_DAC_OVERRIDE for symlink creation -+ * CAP_FOWNER for unlink in sticky directory -+ */ -+ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN); -+ cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE); -+ cap_raise(override_cred->cap_effective, CAP_FOWNER); -+ override_cred->fsuid = 0; -+ override_cred->fsgid = 0; -+ old_cred = override_creds(override_cred); -+ -+ newdentry = lookup_one_len(dentry->d_name.name, upperdir, -+ dentry->d_name.len); -+ err = PTR_ERR(newdentry); -+ if (IS_ERR(newdentry)) -+ goto out_put_cred; -+ -+ /* Just been removed within the same locked region */ -+ WARN_ON(newdentry->d_inode); -+ -+ err = vfs_symlink(upperdir->d_inode, newdentry, ovl_whiteout_symlink); -+ if (err) -+ goto out_dput; -+ -+ ovl_dentry_version_inc(dentry->d_parent); -+ -+ err = vfs_setxattr(newdentry, ovl_whiteout_xattr, "y", 1, 0); -+ if (err) -+ vfs_unlink(upperdir->d_inode, newdentry); -+ -+out_dput: -+ dput(newdentry); -+out_put_cred: -+ revert_creds(old_cred); -+ put_cred(override_cred); -+out: -+ if (err) { -+ /* -+ * There's no way to recover from failure to whiteout. -+ * What should we do? Log a big fat error and... ? -+ */ -+ printk(KERN_ERR "overlayfs: ERROR - failed to whiteout '%s'\n", -+ dentry->d_name.name); -+ } -+ -+ return err; -+} -+ -+static struct dentry *ovl_lookup_create(struct dentry *upperdir, -+ struct dentry *template) -+{ -+ int err; -+ struct dentry *newdentry; -+ struct qstr *name = &template->d_name; -+ -+ newdentry = lookup_one_len(name->name, upperdir, name->len); -+ if (IS_ERR(newdentry)) -+ return newdentry; -+ -+ if (newdentry->d_inode) { -+ const struct cred *old_cred; -+ struct cred *override_cred; -+ -+ /* No need to check whiteout if lower parent is non-existent */ -+ err = -EEXIST; -+ if (!ovl_dentry_lower(template->d_parent)) -+ goto out_dput; -+ -+ if (!S_ISLNK(newdentry->d_inode->i_mode)) -+ goto out_dput; -+ -+ err = -ENOMEM; -+ override_cred = prepare_creds(); -+ if (!override_cred) -+ goto out_dput; -+ -+ /* -+ * CAP_SYS_ADMIN for getxattr -+ * CAP_FOWNER for unlink in sticky directory -+ */ -+ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN); -+ cap_raise(override_cred->cap_effective, CAP_FOWNER); -+ old_cred = override_creds(override_cred); -+ -+ err = -EEXIST; -+ if (ovl_is_whiteout(newdentry)) -+ err = vfs_unlink(upperdir->d_inode, newdentry); -+ -+ revert_creds(old_cred); -+ put_cred(override_cred); -+ if (err) -+ goto out_dput; -+ -+ dput(newdentry); -+ newdentry = lookup_one_len(name->name, upperdir, name->len); -+ if (IS_ERR(newdentry)) { -+ ovl_whiteout(upperdir, template); -+ return newdentry; -+ } -+ -+ /* -+ * Whiteout just been successfully removed, parent -+ * i_mutex is still held, there's no way the lookup -+ * could return positive. -+ */ -+ WARN_ON(newdentry->d_inode); -+ } -+ -+ return newdentry; -+ -+out_dput: -+ dput(newdentry); -+ return ERR_PTR(err); -+} -+ -+struct dentry *ovl_upper_create(struct dentry *upperdir, struct dentry *dentry, -+ struct kstat *stat, const char *link) -+{ -+ int err; -+ struct dentry *newdentry; -+ struct inode *dir = upperdir->d_inode; -+ -+ newdentry = ovl_lookup_create(upperdir, dentry); -+ if (IS_ERR(newdentry)) -+ goto out; -+ -+ switch (stat->mode & S_IFMT) { -+ case S_IFREG: -+ err = vfs_create(dir, newdentry, stat->mode, NULL); -+ break; -+ -+ case S_IFDIR: -+ err = vfs_mkdir(dir, newdentry, stat->mode); -+ break; -+ -+ case S_IFCHR: -+ case S_IFBLK: -+ case S_IFIFO: -+ case S_IFSOCK: -+ err = vfs_mknod(dir, newdentry, stat->mode, stat->rdev); -+ break; -+ -+ case S_IFLNK: -+ err = vfs_symlink(dir, newdentry, link); -+ break; -+ -+ default: -+ err = -EPERM; -+ } -+ if (err) { -+ if (ovl_dentry_is_opaque(dentry)) -+ ovl_whiteout(upperdir, dentry); -+ dput(newdentry); -+ newdentry = ERR_PTR(err); -+ } else if (WARN_ON(!newdentry->d_inode)) { -+ /* -+ * Not quite sure if non-instantiated dentry is legal or not. -+ * VFS doesn't seem to care so check and warn here. -+ */ -+ dput(newdentry); -+ newdentry = ERR_PTR(-ENOENT); -+ } -+ -+out: -+ return newdentry; -+ -+} -+ -+static int ovl_set_opaque(struct dentry *upperdentry) -+{ -+ int err; -+ const struct cred *old_cred; -+ struct cred *override_cred; -+ -+ override_cred = prepare_creds(); -+ if (!override_cred) -+ return -ENOMEM; -+ -+ /* CAP_SYS_ADMIN for setxattr of "trusted" namespace */ -+ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN); -+ old_cred = override_creds(override_cred); -+ err = vfs_setxattr(upperdentry, ovl_opaque_xattr, "y", 1, 0); -+ revert_creds(old_cred); -+ put_cred(override_cred); -+ -+ return err; -+} -+ -+static int ovl_remove_opaque(struct dentry *upperdentry) -+{ -+ int err; -+ const struct cred *old_cred; -+ struct cred *override_cred; -+ -+ override_cred = prepare_creds(); -+ if (!override_cred) -+ return -ENOMEM; -+ -+ /* CAP_SYS_ADMIN for removexattr of "trusted" namespace */ -+ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN); -+ old_cred = override_creds(override_cred); -+ err = vfs_removexattr(upperdentry, ovl_opaque_xattr); -+ revert_creds(old_cred); -+ put_cred(override_cred); -+ -+ return err; -+} -+ -+static int ovl_dir_getattr(struct vfsmount *mnt, struct dentry *dentry, -+ struct kstat *stat) -+{ -+ int err; -+ enum ovl_path_type type; -+ struct path realpath; -+ -+ type = ovl_path_real(dentry, &realpath); -+ err = vfs_getattr(realpath.mnt, realpath.dentry, stat); -+ if (err) -+ return err; -+ -+ stat->dev = dentry->d_sb->s_dev; -+ stat->ino = dentry->d_inode->i_ino; -+ -+ /* -+ * It's probably not worth it to count subdirs to get the -+ * correct link count. nlink=1 seems to pacify 'find' and -+ * other utilities. -+ */ -+ if (type == OVL_PATH_MERGE) -+ stat->nlink = 1; -+ -+ return 0; -+} -+ -+static int ovl_create_object(struct dentry *dentry, int mode, dev_t rdev, -+ const char *link) -+{ -+ int err; -+ struct dentry *newdentry; -+ struct dentry *upperdir; -+ struct inode *inode; -+ struct kstat stat = { -+ .mode = mode, -+ .rdev = rdev, -+ }; -+ -+ err = -ENOMEM; -+ inode = ovl_new_inode(dentry->d_sb, mode, dentry->d_fsdata); -+ if (!inode) -+ goto out; -+ -+ err = ovl_copy_up(dentry->d_parent); -+ if (err) -+ goto out_iput; -+ -+ upperdir = ovl_dentry_upper(dentry->d_parent); -+ mutex_lock_nested(&upperdir->d_inode->i_mutex, I_MUTEX_PARENT); -+ -+ newdentry = ovl_upper_create(upperdir, dentry, &stat, link); -+ err = PTR_ERR(newdentry); -+ if (IS_ERR(newdentry)) -+ goto out_unlock; -+ -+ ovl_dentry_version_inc(dentry->d_parent); -+ if (ovl_dentry_is_opaque(dentry) && S_ISDIR(mode)) { -+ err = ovl_set_opaque(newdentry); -+ if (err) { -+ vfs_rmdir(upperdir->d_inode, newdentry); -+ ovl_whiteout(upperdir, dentry); -+ goto out_dput; -+ } -+ } -+ ovl_dentry_update(dentry, newdentry); -+ d_instantiate(dentry, inode); -+ inode = NULL; -+ newdentry = NULL; -+ err = 0; -+ -+out_dput: -+ dput(newdentry); -+out_unlock: -+ mutex_unlock(&upperdir->d_inode->i_mutex); -+out_iput: -+ iput(inode); -+out: -+ return err; -+} -+ -+static int ovl_create(struct inode *dir, struct dentry *dentry, umode_t mode, -+ struct nameidata *nd) -+{ -+ return ovl_create_object(dentry, (mode & 07777) | S_IFREG, 0, NULL); -+} -+ -+static int ovl_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode) -+{ -+ return ovl_create_object(dentry, (mode & 07777) | S_IFDIR, 0, NULL); -+} -+ -+static int ovl_mknod(struct inode *dir, struct dentry *dentry, umode_t mode, -+ dev_t rdev) -+{ -+ return ovl_create_object(dentry, mode, rdev, NULL); -+} -+ -+static int ovl_symlink(struct inode *dir, struct dentry *dentry, -+ const char *link) -+{ -+ return ovl_create_object(dentry, S_IFLNK, 0, link); -+} -+ -+static int ovl_do_remove(struct dentry *dentry, bool is_dir) -+{ -+ int err; -+ enum ovl_path_type type; -+ struct path realpath; -+ struct dentry *upperdir; -+ -+ err = ovl_copy_up(dentry->d_parent); -+ if (err) -+ return err; -+ -+ upperdir = ovl_dentry_upper(dentry->d_parent); -+ mutex_lock_nested(&upperdir->d_inode->i_mutex, I_MUTEX_PARENT); -+ type = ovl_path_real(dentry, &realpath); -+ if (type != OVL_PATH_LOWER) { -+ err = -ESTALE; -+ if (realpath.dentry->d_parent != upperdir) -+ goto out_d_drop; -+ -+ /* FIXME: create whiteout up front and rename to target */ -+ -+ if (is_dir) -+ err = vfs_rmdir(upperdir->d_inode, realpath.dentry); -+ else -+ err = vfs_unlink(upperdir->d_inode, realpath.dentry); -+ if (err) -+ goto out_d_drop; -+ -+ ovl_dentry_version_inc(dentry->d_parent); -+ } -+ -+ if (type != OVL_PATH_UPPER || ovl_dentry_is_opaque(dentry)) -+ err = ovl_whiteout(upperdir, dentry); -+ -+ /* -+ * Keeping this dentry hashed would mean having to release -+ * upperpath/lowerpath, which could only be done if we are the -+ * sole user of this dentry. Too tricky... Just unhash for -+ * now. -+ */ -+out_d_drop: -+ d_drop(dentry); -+ mutex_unlock(&upperdir->d_inode->i_mutex); -+ -+ return err; -+} -+ -+static int ovl_unlink(struct inode *dir, struct dentry *dentry) -+{ -+ return ovl_do_remove(dentry, false); -+} -+ -+ -+static int ovl_rmdir(struct inode *dir, struct dentry *dentry) -+{ -+ int err; -+ enum ovl_path_type type; -+ -+ type = ovl_path_type(dentry); -+ if (type != OVL_PATH_UPPER) { -+ err = ovl_check_empty_and_clear(dentry, type); -+ if (err) -+ return err; -+ } -+ -+ return ovl_do_remove(dentry, true); -+} -+ -+static int ovl_link(struct dentry *old, struct inode *newdir, -+ struct dentry *new) -+{ -+ int err; -+ struct dentry *olddentry; -+ struct dentry *newdentry; -+ struct dentry *upperdir; -+ -+ err = ovl_copy_up(old); -+ if (err) -+ goto out; -+ -+ err = ovl_copy_up(new->d_parent); -+ if (err) -+ goto out; -+ -+ upperdir = ovl_dentry_upper(new->d_parent); -+ mutex_lock_nested(&upperdir->d_inode->i_mutex, I_MUTEX_PARENT); -+ newdentry = ovl_lookup_create(upperdir, new); -+ err = PTR_ERR(newdentry); -+ if (IS_ERR(newdentry)) -+ goto out_unlock; -+ -+ olddentry = ovl_dentry_upper(old); -+ err = vfs_link(olddentry, upperdir->d_inode, newdentry); -+ if (!err) { -+ if (WARN_ON(!newdentry->d_inode)) { -+ dput(newdentry); -+ err = -ENOENT; -+ goto out_unlock; -+ } -+ -+ ovl_dentry_version_inc(new->d_parent); -+ ovl_dentry_update(new, newdentry); -+ -+ ihold(old->d_inode); -+ d_instantiate(new, old->d_inode); -+ } else { -+ if (ovl_dentry_is_opaque(new)) -+ ovl_whiteout(upperdir, new); -+ dput(newdentry); -+ } -+out_unlock: -+ mutex_unlock(&upperdir->d_inode->i_mutex); -+out: -+ return err; -+ -+} -+ -+static int ovl_rename(struct inode *olddir, struct dentry *old, -+ struct inode *newdir, struct dentry *new) -+{ -+ int err; -+ enum ovl_path_type old_type; -+ enum ovl_path_type new_type; -+ struct dentry *old_upperdir; -+ struct dentry *new_upperdir; -+ struct dentry *olddentry; -+ struct dentry *newdentry; -+ struct dentry *trap; -+ bool old_opaque; -+ bool new_opaque; -+ bool new_create = false; -+ bool is_dir = S_ISDIR(old->d_inode->i_mode); -+ -+ /* Don't copy up directory trees */ -+ old_type = ovl_path_type(old); -+ if (old_type != OVL_PATH_UPPER && is_dir) -+ return -EXDEV; -+ -+ if (new->d_inode) { -+ new_type = ovl_path_type(new); -+ -+ if (new_type == OVL_PATH_LOWER && old_type == OVL_PATH_LOWER) { -+ if (ovl_dentry_lower(old)->d_inode == -+ ovl_dentry_lower(new)->d_inode) -+ return 0; -+ } -+ if (new_type != OVL_PATH_LOWER && old_type != OVL_PATH_LOWER) { -+ if (ovl_dentry_upper(old)->d_inode == -+ ovl_dentry_upper(new)->d_inode) -+ return 0; -+ } -+ -+ if (new_type != OVL_PATH_UPPER && -+ S_ISDIR(new->d_inode->i_mode)) { -+ err = ovl_check_empty_and_clear(new, new_type); -+ if (err) -+ return err; -+ } -+ } else { -+ new_type = OVL_PATH_UPPER; -+ } -+ -+ err = ovl_copy_up(old); -+ if (err) -+ return err; -+ -+ err = ovl_copy_up(new->d_parent); -+ if (err) -+ return err; -+ -+ old_upperdir = ovl_dentry_upper(old->d_parent); -+ new_upperdir = ovl_dentry_upper(new->d_parent); -+ -+ trap = lock_rename(new_upperdir, old_upperdir); -+ -+ olddentry = ovl_dentry_upper(old); -+ newdentry = ovl_dentry_upper(new); -+ if (newdentry) { -+ dget(newdentry); -+ } else { -+ new_create = true; -+ newdentry = ovl_lookup_create(new_upperdir, new); -+ err = PTR_ERR(newdentry); -+ if (IS_ERR(newdentry)) -+ goto out_unlock; -+ } -+ -+ err = -ESTALE; -+ if (olddentry->d_parent != old_upperdir) -+ goto out_dput; -+ if (newdentry->d_parent != new_upperdir) -+ goto out_dput; -+ if (olddentry == trap) -+ goto out_dput; -+ if (newdentry == trap) -+ goto out_dput; -+ -+ old_opaque = ovl_dentry_is_opaque(old); -+ new_opaque = ovl_dentry_is_opaque(new) || new_type != OVL_PATH_UPPER; -+ -+ if (is_dir && !old_opaque && new_opaque) { -+ err = ovl_set_opaque(olddentry); -+ if (err) -+ goto out_dput; -+ } -+ -+ err = vfs_rename(old_upperdir->d_inode, olddentry, -+ new_upperdir->d_inode, newdentry); -+ -+ if (err) { -+ if (new_create && ovl_dentry_is_opaque(new)) -+ ovl_whiteout(new_upperdir, new); -+ if (is_dir && !old_opaque && new_opaque) -+ ovl_remove_opaque(olddentry); -+ goto out_dput; -+ } -+ -+ if (old_type != OVL_PATH_UPPER || old_opaque) -+ err = ovl_whiteout(old_upperdir, old); -+ if (is_dir && old_opaque && !new_opaque) -+ ovl_remove_opaque(olddentry); -+ -+ if (old_opaque != new_opaque) -+ ovl_dentry_set_opaque(old, new_opaque); -+ -+ ovl_dentry_version_inc(old->d_parent); -+ ovl_dentry_version_inc(new->d_parent); -+ -+out_dput: -+ dput(newdentry); -+out_unlock: -+ unlock_rename(new_upperdir, old_upperdir); -+ return err; -+} -+ -+const struct inode_operations ovl_dir_inode_operations = { -+ .lookup = ovl_lookup, -+ .mkdir = ovl_mkdir, -+ .symlink = ovl_symlink, -+ .unlink = ovl_unlink, -+ .rmdir = ovl_rmdir, -+ .rename = ovl_rename, -+ .link = ovl_link, -+ .setattr = ovl_setattr, -+ .create = ovl_create, -+ .mknod = ovl_mknod, -+ .permission = ovl_permission, -+ .getattr = ovl_dir_getattr, -+ .setxattr = ovl_setxattr, -+ .getxattr = ovl_getxattr, -+ .listxattr = ovl_listxattr, -+ .removexattr = ovl_removexattr, -+}; ---- /dev/null -+++ b/fs/overlayfs/inode.c -@@ -0,0 +1,384 @@ -+/* -+ * -+ * Copyright (C) 2011 Novell Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include "overlayfs.h" -+ -+int ovl_setattr(struct dentry *dentry, struct iattr *attr) -+{ -+ struct dentry *upperdentry; -+ int err; -+ -+ if ((attr->ia_valid & ATTR_SIZE) && !ovl_dentry_upper(dentry)) -+ err = ovl_copy_up_truncate(dentry, attr->ia_size); -+ else -+ err = ovl_copy_up(dentry); -+ if (err) -+ return err; -+ -+ upperdentry = ovl_dentry_upper(dentry); -+ -+ if (attr->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) -+ attr->ia_valid &= ~ATTR_MODE; -+ -+ mutex_lock(&upperdentry->d_inode->i_mutex); -+ err = notify_change(upperdentry, attr); -+ mutex_unlock(&upperdentry->d_inode->i_mutex); -+ -+ return err; -+} -+ -+static int ovl_getattr(struct vfsmount *mnt, struct dentry *dentry, -+ struct kstat *stat) -+{ -+ struct path realpath; -+ -+ ovl_path_real(dentry, &realpath); -+ return vfs_getattr(realpath.mnt, realpath.dentry, stat); -+} -+ -+int ovl_permission(struct inode *inode, int mask) -+{ -+ struct ovl_entry *oe; -+ struct dentry *alias = NULL; -+ struct inode *realinode; -+ struct dentry *realdentry; -+ bool is_upper; -+ int err; -+ -+ if (S_ISDIR(inode->i_mode)) { -+ oe = inode->i_private; -+ } else if (mask & MAY_NOT_BLOCK) { -+ return -ECHILD; -+ } else { -+ /* -+ * For non-directories find an alias and get the info -+ * from there. -+ */ -+ spin_lock(&inode->i_lock); -+ if (WARN_ON(list_empty(&inode->i_dentry))) { -+ spin_unlock(&inode->i_lock); -+ return -ENOENT; -+ } -+ alias = list_entry(inode->i_dentry.next, -+ struct dentry, d_alias); -+ dget(alias); -+ spin_unlock(&inode->i_lock); -+ oe = alias->d_fsdata; -+ } -+ -+ realdentry = ovl_entry_real(oe, &is_upper); -+ -+ /* Careful in RCU walk mode */ -+ realinode = ACCESS_ONCE(realdentry->d_inode); -+ if (!realinode) { -+ WARN_ON(!(mask & MAY_NOT_BLOCK)); -+ err = -ENOENT; -+ goto out_dput; -+ } -+ -+ if (mask & MAY_WRITE) { -+ umode_t mode = realinode->i_mode; -+ -+ /* -+ * Writes will always be redirected to upper layer, so -+ * ignore lower layer being read-only. -+ * -+ * If the overlay itself is read-only then proceed -+ * with the permission check, don't return EROFS. -+ * This will only happen if this is the lower layer of -+ * another overlayfs. -+ * -+ * If upper fs becomes read-only after the overlay was -+ * constructed return EROFS to prevent modification of -+ * upper layer. -+ */ -+ err = -EROFS; -+ if (is_upper && !IS_RDONLY(inode) && IS_RDONLY(realinode) && -+ (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode))) -+ goto out_dput; -+ -+ /* -+ * Nobody gets write access to an immutable file. -+ */ -+ err = -EACCES; -+ if (IS_IMMUTABLE(realinode)) -+ goto out_dput; -+ } -+ -+ if (realinode->i_op->permission) -+ err = realinode->i_op->permission(realinode, mask); -+ else -+ err = generic_permission(realinode, mask); -+out_dput: -+ dput(alias); -+ return err; -+} -+ -+ -+struct ovl_link_data { -+ struct dentry *realdentry; -+ void *cookie; -+}; -+ -+static void *ovl_follow_link(struct dentry *dentry, struct nameidata *nd) -+{ -+ void *ret; -+ struct dentry *realdentry; -+ struct inode *realinode; -+ -+ realdentry = ovl_dentry_real(dentry); -+ realinode = realdentry->d_inode; -+ -+ if (WARN_ON(!realinode->i_op->follow_link)) -+ return ERR_PTR(-EPERM); -+ -+ ret = realinode->i_op->follow_link(realdentry, nd); -+ if (IS_ERR(ret)) -+ return ret; -+ -+ if (realinode->i_op->put_link) { -+ struct ovl_link_data *data; -+ -+ data = kmalloc(sizeof(struct ovl_link_data), GFP_KERNEL); -+ if (!data) { -+ realinode->i_op->put_link(realdentry, nd, ret); -+ return ERR_PTR(-ENOMEM); -+ } -+ data->realdentry = realdentry; -+ data->cookie = ret; -+ -+ return data; -+ } else { -+ return NULL; -+ } -+} -+ -+static void ovl_put_link(struct dentry *dentry, struct nameidata *nd, void *c) -+{ -+ struct inode *realinode; -+ struct ovl_link_data *data = c; -+ -+ if (!data) -+ return; -+ -+ realinode = data->realdentry->d_inode; -+ realinode->i_op->put_link(data->realdentry, nd, data->cookie); -+ kfree(data); -+} -+ -+static int ovl_readlink(struct dentry *dentry, char __user *buf, int bufsiz) -+{ -+ struct path realpath; -+ struct inode *realinode; -+ -+ ovl_path_real(dentry, &realpath); -+ realinode = realpath.dentry->d_inode; -+ -+ if (!realinode->i_op->readlink) -+ return -EINVAL; -+ -+ touch_atime(realpath.mnt, realpath.dentry); -+ -+ return realinode->i_op->readlink(realpath.dentry, buf, bufsiz); -+} -+ -+ -+static bool ovl_is_private_xattr(const char *name) -+{ -+ return strncmp(name, "trusted.overlay.", 14) == 0; -+} -+ -+int ovl_setxattr(struct dentry *dentry, const char *name, -+ const void *value, size_t size, int flags) -+{ -+ int err; -+ struct dentry *upperdentry; -+ -+ if (ovl_is_private_xattr(name)) -+ return -EPERM; -+ -+ err = ovl_copy_up(dentry); -+ if (err) -+ return err; -+ -+ upperdentry = ovl_dentry_upper(dentry); -+ return vfs_setxattr(upperdentry, name, value, size, flags); -+} -+ -+ssize_t ovl_getxattr(struct dentry *dentry, const char *name, -+ void *value, size_t size) -+{ -+ if (ovl_path_type(dentry->d_parent) == OVL_PATH_MERGE && -+ ovl_is_private_xattr(name)) -+ return -ENODATA; -+ -+ return vfs_getxattr(ovl_dentry_real(dentry), name, value, size); -+} -+ -+ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size) -+{ -+ ssize_t res; -+ int off; -+ -+ res = vfs_listxattr(ovl_dentry_real(dentry), list, size); -+ if (res <= 0 || size == 0) -+ return res; -+ -+ if (ovl_path_type(dentry->d_parent) != OVL_PATH_MERGE) -+ return res; -+ -+ /* filter out private xattrs */ -+ for (off = 0; off < res;) { -+ char *s = list + off; -+ size_t slen = strlen(s) + 1; -+ -+ BUG_ON(off + slen > res); -+ -+ if (ovl_is_private_xattr(s)) { -+ res -= slen; -+ memmove(s, s + slen, res - off); -+ } else { -+ off += slen; -+ } -+ } -+ -+ return res; -+} -+ -+int ovl_removexattr(struct dentry *dentry, const char *name) -+{ -+ int err; -+ struct path realpath; -+ enum ovl_path_type type; -+ -+ if (ovl_path_type(dentry->d_parent) == OVL_PATH_MERGE && -+ ovl_is_private_xattr(name)) -+ return -ENODATA; -+ -+ type = ovl_path_real(dentry, &realpath); -+ if (type == OVL_PATH_LOWER) { -+ err = vfs_getxattr(realpath.dentry, name, NULL, 0); -+ if (err < 0) -+ return err; -+ -+ err = ovl_copy_up(dentry); -+ if (err) -+ return err; -+ -+ ovl_path_upper(dentry, &realpath); -+ } -+ -+ return vfs_removexattr(realpath.dentry, name); -+} -+ -+static bool ovl_open_need_copy_up(int flags, enum ovl_path_type type, -+ struct dentry *realdentry) -+{ -+ if (type != OVL_PATH_LOWER) -+ return false; -+ -+ if (special_file(realdentry->d_inode->i_mode)) -+ return false; -+ -+ if (!(OPEN_FMODE(flags) & FMODE_WRITE) && !(flags & O_TRUNC)) -+ return false; -+ -+ return true; -+} -+ -+static struct file *ovl_open(struct dentry *dentry, struct file *file, -+ const struct cred *cred) -+{ -+ int err; -+ struct path realpath; -+ enum ovl_path_type type; -+ -+ type = ovl_path_real(dentry, &realpath); -+ if (ovl_open_need_copy_up(file->f_flags, type, realpath.dentry)) { -+ if (file->f_flags & O_TRUNC) -+ err = ovl_copy_up_truncate(dentry, 0); -+ else -+ err = ovl_copy_up(dentry); -+ if (err) -+ return ERR_PTR(err); -+ -+ ovl_path_upper(dentry, &realpath); -+ } -+ -+ return vfs_open(&realpath, file, cred); -+} -+ -+static const struct inode_operations ovl_file_inode_operations = { -+ .setattr = ovl_setattr, -+ .permission = ovl_permission, -+ .getattr = ovl_getattr, -+ .setxattr = ovl_setxattr, -+ .getxattr = ovl_getxattr, -+ .listxattr = ovl_listxattr, -+ .removexattr = ovl_removexattr, -+ .open = ovl_open, -+}; -+ -+static const struct inode_operations ovl_symlink_inode_operations = { -+ .setattr = ovl_setattr, -+ .follow_link = ovl_follow_link, -+ .put_link = ovl_put_link, -+ .readlink = ovl_readlink, -+ .getattr = ovl_getattr, -+ .setxattr = ovl_setxattr, -+ .getxattr = ovl_getxattr, -+ .listxattr = ovl_listxattr, -+ .removexattr = ovl_removexattr, -+}; -+ -+struct inode *ovl_new_inode(struct super_block *sb, umode_t mode, -+ struct ovl_entry *oe) -+{ -+ struct inode *inode; -+ -+ inode = new_inode(sb); -+ if (!inode) -+ return NULL; -+ -+ mode &= S_IFMT; -+ -+ inode->i_ino = get_next_ino(); -+ inode->i_mode = mode; -+ inode->i_flags |= S_NOATIME | S_NOCMTIME; -+ -+ switch (mode) { -+ case S_IFDIR: -+ inode->i_private = oe; -+ inode->i_op = &ovl_dir_inode_operations; -+ inode->i_fop = &ovl_dir_operations; -+ break; -+ -+ case S_IFLNK: -+ inode->i_op = &ovl_symlink_inode_operations; -+ break; -+ -+ case S_IFREG: -+ case S_IFSOCK: -+ case S_IFBLK: -+ case S_IFCHR: -+ case S_IFIFO: -+ inode->i_op = &ovl_file_inode_operations; -+ break; -+ -+ default: -+ WARN(1, "illegal file type: %i\n", mode); -+ inode = NULL; -+ } -+ -+ return inode; -+ -+} ---- /dev/null -+++ b/fs/overlayfs/overlayfs.h -@@ -0,0 +1,64 @@ -+/* -+ * -+ * Copyright (C) 2011 Novell Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ */ -+ -+struct ovl_entry; -+ -+enum ovl_path_type { -+ OVL_PATH_UPPER, -+ OVL_PATH_MERGE, -+ OVL_PATH_LOWER, -+}; -+ -+extern const char *ovl_opaque_xattr; -+extern const char *ovl_whiteout_xattr; -+extern const struct dentry_operations ovl_dentry_operations; -+ -+enum ovl_path_type ovl_path_type(struct dentry *dentry); -+u64 ovl_dentry_version_get(struct dentry *dentry); -+void ovl_dentry_version_inc(struct dentry *dentry); -+void ovl_path_upper(struct dentry *dentry, struct path *path); -+void ovl_path_lower(struct dentry *dentry, struct path *path); -+enum ovl_path_type ovl_path_real(struct dentry *dentry, struct path *path); -+struct dentry *ovl_dentry_upper(struct dentry *dentry); -+struct dentry *ovl_dentry_lower(struct dentry *dentry); -+struct dentry *ovl_dentry_real(struct dentry *dentry); -+struct dentry *ovl_entry_real(struct ovl_entry *oe, bool *is_upper); -+bool ovl_dentry_is_opaque(struct dentry *dentry); -+void ovl_dentry_set_opaque(struct dentry *dentry, bool opaque); -+bool ovl_is_whiteout(struct dentry *dentry); -+void ovl_dentry_update(struct dentry *dentry, struct dentry *upperdentry); -+struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry, -+ struct nameidata *nd); -+struct file *ovl_path_open(struct path *path, int flags); -+ -+struct dentry *ovl_upper_create(struct dentry *upperdir, struct dentry *dentry, -+ struct kstat *stat, const char *link); -+ -+/* readdir.c */ -+extern const struct file_operations ovl_dir_operations; -+int ovl_check_empty_and_clear(struct dentry *dentry, enum ovl_path_type type); -+ -+/* inode.c */ -+int ovl_setattr(struct dentry *dentry, struct iattr *attr); -+int ovl_permission(struct inode *inode, int mask); -+int ovl_setxattr(struct dentry *dentry, const char *name, -+ const void *value, size_t size, int flags); -+ssize_t ovl_getxattr(struct dentry *dentry, const char *name, -+ void *value, size_t size); -+ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size); -+int ovl_removexattr(struct dentry *dentry, const char *name); -+ -+struct inode *ovl_new_inode(struct super_block *sb, umode_t mode, -+ struct ovl_entry *oe); -+/* dir.c */ -+extern const struct inode_operations ovl_dir_inode_operations; -+ -+/* copy_up.c */ -+int ovl_copy_up(struct dentry *dentry); -+int ovl_copy_up_truncate(struct dentry *dentry, loff_t size); ---- /dev/null -+++ b/fs/overlayfs/readdir.c -@@ -0,0 +1,565 @@ -+/* -+ * -+ * Copyright (C) 2011 Novell Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "overlayfs.h" -+ -+struct ovl_cache_entry { -+ const char *name; -+ unsigned int len; -+ unsigned int type; -+ u64 ino; -+ bool is_whiteout; -+ struct list_head l_node; -+ struct rb_node node; -+}; -+ -+struct ovl_readdir_data { -+ struct rb_root *root; -+ struct list_head *list; -+ struct list_head *middle; -+ struct dentry *dir; -+ int count; -+ int err; -+}; -+ -+struct ovl_dir_file { -+ bool is_real; -+ bool is_cached; -+ struct list_head cursor; -+ u64 cache_version; -+ struct list_head cache; -+ struct file *realfile; -+}; -+ -+static struct ovl_cache_entry *ovl_cache_entry_from_node(struct rb_node *n) -+{ -+ return container_of(n, struct ovl_cache_entry, node); -+} -+ -+static struct ovl_cache_entry *ovl_cache_entry_find(struct rb_root *root, -+ const char *name, int len) -+{ -+ struct rb_node *node = root->rb_node; -+ int cmp; -+ -+ while (node) { -+ struct ovl_cache_entry *p = ovl_cache_entry_from_node(node); -+ -+ cmp = strncmp(name, p->name, len); -+ if (cmp > 0) -+ node = p->node.rb_right; -+ else if (cmp < 0 || len < p->len) -+ node = p->node.rb_left; -+ else -+ return p; -+ } -+ -+ return NULL; -+} -+ -+static struct ovl_cache_entry *ovl_cache_entry_new(const char *name, int len, -+ u64 ino, unsigned int d_type) -+{ -+ struct ovl_cache_entry *p; -+ -+ p = kmalloc(sizeof(*p) + len + 1, GFP_KERNEL); -+ if (p) { -+ char *name_copy = (char *) (p + 1); -+ memcpy(name_copy, name, len); -+ name_copy[len] = '\0'; -+ p->name = name_copy; -+ p->len = len; -+ p->type = d_type; -+ p->ino = ino; -+ p->is_whiteout = false; -+ } -+ -+ return p; -+} -+ -+static int ovl_cache_entry_add_rb(struct ovl_readdir_data *rdd, -+ const char *name, int len, u64 ino, -+ unsigned int d_type) -+{ -+ struct rb_node **newp = &rdd->root->rb_node; -+ struct rb_node *parent = NULL; -+ struct ovl_cache_entry *p; -+ -+ while (*newp) { -+ int cmp; -+ struct ovl_cache_entry *tmp; -+ -+ parent = *newp; -+ tmp = ovl_cache_entry_from_node(*newp); -+ cmp = strncmp(name, tmp->name, len); -+ if (cmp > 0) -+ newp = &tmp->node.rb_right; -+ else if (cmp < 0 || len < tmp->len) -+ newp = &tmp->node.rb_left; -+ else -+ return 0; -+ } -+ -+ p = ovl_cache_entry_new(name, len, ino, d_type); -+ if (p == NULL) -+ return -ENOMEM; -+ -+ list_add_tail(&p->l_node, rdd->list); -+ rb_link_node(&p->node, parent, newp); -+ rb_insert_color(&p->node, rdd->root); -+ -+ return 0; -+} -+ -+static int ovl_fill_lower(void *buf, const char *name, int namelen, -+ loff_t offset, u64 ino, unsigned int d_type) -+{ -+ struct ovl_readdir_data *rdd = buf; -+ struct ovl_cache_entry *p; -+ -+ rdd->count++; -+ p = ovl_cache_entry_find(rdd->root, name, namelen); -+ if (p) { -+ list_move_tail(&p->l_node, rdd->middle); -+ } else { -+ p = ovl_cache_entry_new(name, namelen, ino, d_type); -+ if (p == NULL) -+ rdd->err = -ENOMEM; -+ else -+ list_add_tail(&p->l_node, rdd->middle); -+ } -+ -+ return rdd->err; -+} -+ -+static void ovl_cache_free(struct list_head *list) -+{ -+ struct ovl_cache_entry *p; -+ struct ovl_cache_entry *n; -+ -+ list_for_each_entry_safe(p, n, list, l_node) -+ kfree(p); -+ -+ INIT_LIST_HEAD(list); -+} -+ -+static int ovl_fill_upper(void *buf, const char *name, int namelen, -+ loff_t offset, u64 ino, unsigned int d_type) -+{ -+ struct ovl_readdir_data *rdd = buf; -+ -+ rdd->count++; -+ return ovl_cache_entry_add_rb(rdd, name, namelen, ino, d_type); -+} -+ -+static inline int ovl_dir_read(struct path *realpath, -+ struct ovl_readdir_data *rdd, filldir_t filler) -+{ -+ struct file *realfile; -+ int err; -+ -+ realfile = ovl_path_open(realpath, O_RDONLY | O_DIRECTORY); -+ if (IS_ERR(realfile)) -+ return PTR_ERR(realfile); -+ -+ do { -+ rdd->count = 0; -+ rdd->err = 0; -+ err = vfs_readdir(realfile, filler, rdd); -+ if (err >= 0) -+ err = rdd->err; -+ } while (!err && rdd->count); -+ fput(realfile); -+ -+ return 0; -+} -+ -+static void ovl_dir_reset(struct file *file) -+{ -+ struct ovl_dir_file *od = file->private_data; -+ enum ovl_path_type type = ovl_path_type(file->f_path.dentry); -+ -+ if (ovl_dentry_version_get(file->f_path.dentry) != od->cache_version) { -+ list_del_init(&od->cursor); -+ ovl_cache_free(&od->cache); -+ od->is_cached = false; -+ } -+ WARN_ON(!od->is_real && type != OVL_PATH_MERGE); -+ if (od->is_real && type == OVL_PATH_MERGE) { -+ fput(od->realfile); -+ od->realfile = NULL; -+ od->is_real = false; -+ } -+} -+ -+static int ovl_dir_mark_whiteouts(struct ovl_readdir_data *rdd) -+{ -+ struct ovl_cache_entry *p; -+ struct dentry *dentry; -+ const struct cred *old_cred; -+ struct cred *override_cred; -+ -+ override_cred = prepare_creds(); -+ if (!override_cred) { -+ ovl_cache_free(rdd->list); -+ return -ENOMEM; -+ } -+ -+ /* -+ * CAP_SYS_ADMIN for getxattr -+ * CAP_DAC_OVERRIDE for lookup -+ */ -+ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN); -+ cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE); -+ old_cred = override_creds(override_cred); -+ -+ mutex_lock(&rdd->dir->d_inode->i_mutex); -+ list_for_each_entry(p, rdd->list, l_node) { -+ if (p->type != DT_LNK) -+ continue; -+ -+ dentry = lookup_one_len(p->name, rdd->dir, p->len); -+ if (IS_ERR(dentry)) -+ continue; -+ -+ p->is_whiteout = ovl_is_whiteout(dentry); -+ dput(dentry); -+ } -+ mutex_unlock(&rdd->dir->d_inode->i_mutex); -+ -+ revert_creds(old_cred); -+ put_cred(override_cred); -+ -+ return 0; -+} -+ -+static inline int ovl_dir_read_merged(struct path *upperpath, -+ struct path *lowerpath, -+ struct ovl_readdir_data *rdd) -+{ -+ int err; -+ struct rb_root root = RB_ROOT; -+ struct list_head middle; -+ -+ rdd->root = &root; -+ if (upperpath->dentry) { -+ rdd->dir = upperpath->dentry; -+ err = ovl_dir_read(upperpath, rdd, ovl_fill_upper); -+ if (err) -+ goto out; -+ -+ err = ovl_dir_mark_whiteouts(rdd); -+ if (err) -+ goto out; -+ } -+ /* -+ * Insert lowerpath entries before upperpath ones, this allows -+ * offsets to be reasonably constant -+ */ -+ list_add(&middle, rdd->list); -+ rdd->middle = &middle; -+ err = ovl_dir_read(lowerpath, rdd, ovl_fill_lower); -+ list_del(&middle); -+out: -+ rdd->root = NULL; -+ -+ return err; -+} -+ -+static void ovl_seek_cursor(struct ovl_dir_file *od, loff_t pos) -+{ -+ struct list_head *l; -+ loff_t off; -+ -+ l = od->cache.next; -+ for (off = 0; off < pos; off++) { -+ if (l == &od->cache) -+ break; -+ l = l->next; -+ } -+ list_move_tail(&od->cursor, l); -+} -+ -+static int ovl_readdir(struct file *file, void *buf, filldir_t filler) -+{ -+ struct ovl_dir_file *od = file->private_data; -+ int res; -+ -+ if (!file->f_pos) -+ ovl_dir_reset(file); -+ -+ if (od->is_real) { -+ res = vfs_readdir(od->realfile, filler, buf); -+ file->f_pos = od->realfile->f_pos; -+ -+ return res; -+ } -+ -+ if (!od->is_cached) { -+ struct path lowerpath; -+ struct path upperpath; -+ struct ovl_readdir_data rdd = { .list = &od->cache }; -+ -+ ovl_path_lower(file->f_path.dentry, &lowerpath); -+ ovl_path_upper(file->f_path.dentry, &upperpath); -+ -+ res = ovl_dir_read_merged(&upperpath, &lowerpath, &rdd); -+ if (res) { -+ ovl_cache_free(rdd.list); -+ return res; -+ } -+ -+ od->cache_version = ovl_dentry_version_get(file->f_path.dentry); -+ od->is_cached = true; -+ -+ ovl_seek_cursor(od, file->f_pos); -+ } -+ -+ while (od->cursor.next != &od->cache) { -+ int over; -+ loff_t off; -+ struct ovl_cache_entry *p; -+ -+ p = list_entry(od->cursor.next, struct ovl_cache_entry, l_node); -+ off = file->f_pos; -+ if (!p->is_whiteout) { -+ over = filler(buf, p->name, p->len, off, p->ino, -+ p->type); -+ if (over) -+ break; -+ } -+ file->f_pos++; -+ list_move(&od->cursor, &p->l_node); -+ } -+ -+ return 0; -+} -+ -+static loff_t ovl_dir_llseek(struct file *file, loff_t offset, int origin) -+{ -+ loff_t res; -+ struct ovl_dir_file *od = file->private_data; -+ -+ mutex_lock(&file->f_dentry->d_inode->i_mutex); -+ if (!file->f_pos) -+ ovl_dir_reset(file); -+ -+ if (od->is_real) { -+ res = vfs_llseek(od->realfile, offset, origin); -+ file->f_pos = od->realfile->f_pos; -+ } else { -+ res = -EINVAL; -+ -+ switch (origin) { -+ case SEEK_CUR: -+ offset += file->f_pos; -+ break; -+ case SEEK_SET: -+ break; -+ default: -+ goto out_unlock; -+ } -+ if (offset < 0) -+ goto out_unlock; -+ -+ if (offset != file->f_pos) { -+ file->f_pos = offset; -+ if (od->is_cached) -+ ovl_seek_cursor(od, offset); -+ } -+ res = offset; -+ } -+out_unlock: -+ mutex_unlock(&file->f_dentry->d_inode->i_mutex); -+ -+ return res; -+} -+ -+static int ovl_dir_fsync(struct file *file, loff_t start, loff_t end, -+ int datasync) -+{ -+ struct ovl_dir_file *od = file->private_data; -+ -+ /* May need to reopen directory if it got copied up */ -+ if (!od->realfile) { -+ struct path upperpath; -+ -+ ovl_path_upper(file->f_path.dentry, &upperpath); -+ od->realfile = ovl_path_open(&upperpath, O_RDONLY); -+ if (IS_ERR(od->realfile)) -+ return PTR_ERR(od->realfile); -+ } -+ -+ return vfs_fsync_range(od->realfile, start, end, datasync); -+} -+ -+static int ovl_dir_release(struct inode *inode, struct file *file) -+{ -+ struct ovl_dir_file *od = file->private_data; -+ -+ list_del(&od->cursor); -+ ovl_cache_free(&od->cache); -+ if (od->realfile) -+ fput(od->realfile); -+ kfree(od); -+ -+ return 0; -+} -+ -+static int ovl_dir_open(struct inode *inode, struct file *file) -+{ -+ struct path realpath; -+ struct file *realfile; -+ struct ovl_dir_file *od; -+ enum ovl_path_type type; -+ -+ od = kzalloc(sizeof(struct ovl_dir_file), GFP_KERNEL); -+ if (!od) -+ return -ENOMEM; -+ -+ type = ovl_path_real(file->f_path.dentry, &realpath); -+ realfile = ovl_path_open(&realpath, file->f_flags); -+ if (IS_ERR(realfile)) { -+ kfree(od); -+ return PTR_ERR(realfile); -+ } -+ INIT_LIST_HEAD(&od->cache); -+ INIT_LIST_HEAD(&od->cursor); -+ od->is_cached = false; -+ od->realfile = realfile; -+ od->is_real = (type != OVL_PATH_MERGE); -+ file->private_data = od; -+ -+ return 0; -+} -+ -+const struct file_operations ovl_dir_operations = { -+ .read = generic_read_dir, -+ .open = ovl_dir_open, -+ .readdir = ovl_readdir, -+ .llseek = ovl_dir_llseek, -+ .fsync = ovl_dir_fsync, -+ .release = ovl_dir_release, -+}; -+ -+static int ovl_check_empty_dir(struct dentry *dentry, struct list_head *list) -+{ -+ int err; -+ struct path lowerpath; -+ struct path upperpath; -+ struct ovl_cache_entry *p; -+ struct ovl_readdir_data rdd = { .list = list }; -+ -+ ovl_path_upper(dentry, &upperpath); -+ ovl_path_lower(dentry, &lowerpath); -+ -+ err = ovl_dir_read_merged(&upperpath, &lowerpath, &rdd); -+ if (err) -+ return err; -+ -+ err = 0; -+ -+ list_for_each_entry(p, list, l_node) { -+ if (p->is_whiteout) -+ continue; -+ -+ if (p->name[0] == '.') { -+ if (p->len == 1) -+ continue; -+ if (p->len == 2 && p->name[1] == '.') -+ continue; -+ } -+ err = -ENOTEMPTY; -+ break; -+ } -+ -+ return err; -+} -+ -+static int ovl_remove_whiteouts(struct dentry *dir, struct list_head *list) -+{ -+ struct path upperpath; -+ struct dentry *upperdir; -+ struct ovl_cache_entry *p; -+ const struct cred *old_cred; -+ struct cred *override_cred; -+ int err; -+ -+ ovl_path_upper(dir, &upperpath); -+ upperdir = upperpath.dentry; -+ -+ override_cred = prepare_creds(); -+ if (!override_cred) -+ return -ENOMEM; -+ -+ /* -+ * CAP_DAC_OVERRIDE for lookup and unlink -+ * CAP_SYS_ADMIN for setxattr of "trusted" namespace -+ * CAP_FOWNER for unlink in sticky directory -+ */ -+ cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE); -+ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN); -+ cap_raise(override_cred->cap_effective, CAP_FOWNER); -+ old_cred = override_creds(override_cred); -+ -+ err = vfs_setxattr(upperdir, ovl_opaque_xattr, "y", 1, 0); -+ if (err) -+ goto out_revert_creds; -+ -+ mutex_lock_nested(&upperdir->d_inode->i_mutex, I_MUTEX_PARENT); -+ list_for_each_entry(p, list, l_node) { -+ struct dentry *dentry; -+ int ret; -+ -+ if (!p->is_whiteout) -+ continue; -+ -+ dentry = lookup_one_len(p->name, upperdir, p->len); -+ if (IS_ERR(dentry)) { -+ printk(KERN_WARNING -+ "overlayfs: failed to lookup whiteout %.*s: %li\n", -+ p->len, p->name, PTR_ERR(dentry)); -+ continue; -+ } -+ ret = vfs_unlink(upperdir->d_inode, dentry); -+ dput(dentry); -+ if (ret) -+ printk(KERN_WARNING -+ "overlayfs: failed to unlink whiteout %.*s: %i\n", -+ p->len, p->name, ret); -+ } -+ mutex_unlock(&upperdir->d_inode->i_mutex); -+ -+out_revert_creds: -+ revert_creds(old_cred); -+ put_cred(override_cred); -+ -+ return err; -+} -+ -+int ovl_check_empty_and_clear(struct dentry *dentry, enum ovl_path_type type) -+{ -+ int err; -+ LIST_HEAD(list); -+ -+ err = ovl_check_empty_dir(dentry, &list); -+ if (!err && type == OVL_PATH_MERGE) -+ err = ovl_remove_whiteouts(dentry, &list); -+ -+ ovl_cache_free(&list); -+ -+ return err; -+} ---- /dev/null -+++ b/fs/overlayfs/super.c -@@ -0,0 +1,664 @@ -+/* -+ * -+ * Copyright (C) 2011 Novell Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "overlayfs.h" -+ -+MODULE_AUTHOR("Miklos Szeredi "); -+MODULE_DESCRIPTION("Overlay filesystem"); -+MODULE_LICENSE("GPL"); -+ -+struct ovl_config { -+ char *lowerdir; -+ char *upperdir; -+}; -+ -+/* private information held for overlayfs's superblock */ -+struct ovl_fs { -+ struct vfsmount *upper_mnt; -+ struct vfsmount *lower_mnt; -+ /* pathnames of lower and upper dirs, for show_options */ -+ struct ovl_config config; -+}; -+ -+/* private information held for every overlayfs dentry */ -+struct ovl_entry { -+ /* -+ * Keep "double reference" on upper dentries, so that -+ * d_delete() doesn't think it's OK to reset d_inode to NULL. -+ */ -+ struct dentry *__upperdentry; -+ struct dentry *lowerdentry; -+ union { -+ struct { -+ u64 version; -+ bool opaque; -+ }; -+ struct rcu_head rcu; -+ }; -+}; -+ -+const char *ovl_whiteout_xattr = "trusted.overlay.whiteout"; -+const char *ovl_opaque_xattr = "trusted.overlay.opaque"; -+ -+ -+enum ovl_path_type ovl_path_type(struct dentry *dentry) -+{ -+ struct ovl_entry *oe = dentry->d_fsdata; -+ -+ if (oe->__upperdentry) { -+ if (oe->lowerdentry && S_ISDIR(dentry->d_inode->i_mode)) -+ return OVL_PATH_MERGE; -+ else -+ return OVL_PATH_UPPER; -+ } else { -+ return OVL_PATH_LOWER; -+ } -+} -+ -+static struct dentry *ovl_upperdentry_dereference(struct ovl_entry *oe) -+{ -+ struct dentry *upperdentry = ACCESS_ONCE(oe->__upperdentry); -+ smp_read_barrier_depends(); -+ return upperdentry; -+} -+ -+void ovl_path_upper(struct dentry *dentry, struct path *path) -+{ -+ struct ovl_fs *ofs = dentry->d_sb->s_fs_info; -+ struct ovl_entry *oe = dentry->d_fsdata; -+ -+ path->mnt = ofs->upper_mnt; -+ path->dentry = ovl_upperdentry_dereference(oe); -+} -+ -+void ovl_path_lower(struct dentry *dentry, struct path *path) -+{ -+ struct ovl_fs *ofs = dentry->d_sb->s_fs_info; -+ struct ovl_entry *oe = dentry->d_fsdata; -+ -+ path->mnt = ofs->lower_mnt; -+ path->dentry = oe->lowerdentry; -+} -+ -+enum ovl_path_type ovl_path_real(struct dentry *dentry, struct path *path) -+{ -+ -+ enum ovl_path_type type = ovl_path_type(dentry); -+ -+ if (type == OVL_PATH_LOWER) -+ ovl_path_lower(dentry, path); -+ else -+ ovl_path_upper(dentry, path); -+ -+ return type; -+} -+ -+struct dentry *ovl_dentry_upper(struct dentry *dentry) -+{ -+ struct ovl_entry *oe = dentry->d_fsdata; -+ -+ return ovl_upperdentry_dereference(oe); -+} -+ -+struct dentry *ovl_dentry_lower(struct dentry *dentry) -+{ -+ struct ovl_entry *oe = dentry->d_fsdata; -+ -+ return oe->lowerdentry; -+} -+ -+struct dentry *ovl_dentry_real(struct dentry *dentry) -+{ -+ struct ovl_entry *oe = dentry->d_fsdata; -+ struct dentry *realdentry; -+ -+ realdentry = ovl_upperdentry_dereference(oe); -+ if (!realdentry) -+ realdentry = oe->lowerdentry; -+ -+ return realdentry; -+} -+ -+struct dentry *ovl_entry_real(struct ovl_entry *oe, bool *is_upper) -+{ -+ struct dentry *realdentry; -+ -+ realdentry = ovl_upperdentry_dereference(oe); -+ if (realdentry) { -+ *is_upper = true; -+ } else { -+ realdentry = oe->lowerdentry; -+ *is_upper = false; -+ } -+ return realdentry; -+} -+ -+bool ovl_dentry_is_opaque(struct dentry *dentry) -+{ -+ struct ovl_entry *oe = dentry->d_fsdata; -+ return oe->opaque; -+} -+ -+void ovl_dentry_set_opaque(struct dentry *dentry, bool opaque) -+{ -+ struct ovl_entry *oe = dentry->d_fsdata; -+ oe->opaque = opaque; -+} -+ -+void ovl_dentry_update(struct dentry *dentry, struct dentry *upperdentry) -+{ -+ struct ovl_entry *oe = dentry->d_fsdata; -+ -+ WARN_ON(!mutex_is_locked(&upperdentry->d_parent->d_inode->i_mutex)); -+ WARN_ON(oe->__upperdentry); -+ BUG_ON(!upperdentry->d_inode); -+ smp_wmb(); -+ oe->__upperdentry = dget(upperdentry); -+} -+ -+void ovl_dentry_version_inc(struct dentry *dentry) -+{ -+ struct ovl_entry *oe = dentry->d_fsdata; -+ -+ WARN_ON(!mutex_is_locked(&dentry->d_inode->i_mutex)); -+ oe->version++; -+} -+ -+u64 ovl_dentry_version_get(struct dentry *dentry) -+{ -+ struct ovl_entry *oe = dentry->d_fsdata; -+ -+ WARN_ON(!mutex_is_locked(&dentry->d_inode->i_mutex)); -+ return oe->version; -+} -+ -+bool ovl_is_whiteout(struct dentry *dentry) -+{ -+ int res; -+ char val; -+ -+ if (!dentry) -+ return false; -+ if (!dentry->d_inode) -+ return false; -+ if (!S_ISLNK(dentry->d_inode->i_mode)) -+ return false; -+ -+ res = vfs_getxattr(dentry, ovl_whiteout_xattr, &val, 1); -+ if (res == 1 && val == 'y') -+ return true; -+ -+ return false; -+} -+ -+static bool ovl_is_opaquedir(struct dentry *dentry) -+{ -+ int res; -+ char val; -+ -+ if (!S_ISDIR(dentry->d_inode->i_mode)) -+ return false; -+ -+ res = vfs_getxattr(dentry, ovl_opaque_xattr, &val, 1); -+ if (res == 1 && val == 'y') -+ return true; -+ -+ return false; -+} -+ -+static void ovl_entry_free(struct rcu_head *head) -+{ -+ struct ovl_entry *oe = container_of(head, struct ovl_entry, rcu); -+ kfree(oe); -+} -+ -+static void ovl_dentry_release(struct dentry *dentry) -+{ -+ struct ovl_entry *oe = dentry->d_fsdata; -+ -+ if (oe) { -+ dput(oe->__upperdentry); -+ dput(oe->__upperdentry); -+ dput(oe->lowerdentry); -+ call_rcu(&oe->rcu, ovl_entry_free); -+ } -+} -+ -+const struct dentry_operations ovl_dentry_operations = { -+ .d_release = ovl_dentry_release, -+}; -+ -+static struct ovl_entry *ovl_alloc_entry(void) -+{ -+ return kzalloc(sizeof(struct ovl_entry), GFP_KERNEL); -+} -+ -+static inline struct dentry *ovl_lookup_real(struct dentry *dir, -+ struct qstr *name) -+{ -+ struct dentry *dentry; -+ -+ mutex_lock(&dir->d_inode->i_mutex); -+ dentry = lookup_one_len(name->name, dir, name->len); -+ mutex_unlock(&dir->d_inode->i_mutex); -+ -+ if (IS_ERR(dentry)) { -+ if (PTR_ERR(dentry) == -ENOENT) -+ dentry = NULL; -+ } else if (!dentry->d_inode) { -+ dput(dentry); -+ dentry = NULL; -+ } -+ return dentry; -+} -+ -+static int ovl_do_lookup(struct dentry *dentry) -+{ -+ struct ovl_entry *oe; -+ struct dentry *upperdir; -+ struct dentry *lowerdir; -+ struct dentry *upperdentry = NULL; -+ struct dentry *lowerdentry = NULL; -+ struct inode *inode = NULL; -+ int err; -+ -+ err = -ENOMEM; -+ oe = ovl_alloc_entry(); -+ if (!oe) -+ goto out; -+ -+ upperdir = ovl_dentry_upper(dentry->d_parent); -+ lowerdir = ovl_dentry_lower(dentry->d_parent); -+ -+ if (upperdir) { -+ upperdentry = ovl_lookup_real(upperdir, &dentry->d_name); -+ err = PTR_ERR(upperdentry); -+ if (IS_ERR(upperdentry)) -+ goto out_put_dir; -+ -+ if (lowerdir && upperdentry && -+ (S_ISLNK(upperdentry->d_inode->i_mode) || -+ S_ISDIR(upperdentry->d_inode->i_mode))) { -+ const struct cred *old_cred; -+ struct cred *override_cred; -+ -+ err = -ENOMEM; -+ override_cred = prepare_creds(); -+ if (!override_cred) -+ goto out_dput_upper; -+ -+ /* CAP_SYS_ADMIN needed for getxattr */ -+ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN); -+ old_cred = override_creds(override_cred); -+ -+ if (ovl_is_opaquedir(upperdentry)) { -+ oe->opaque = true; -+ } else if (ovl_is_whiteout(upperdentry)) { -+ dput(upperdentry); -+ upperdentry = NULL; -+ oe->opaque = true; -+ } -+ revert_creds(old_cred); -+ put_cred(override_cred); -+ } -+ } -+ if (lowerdir && !oe->opaque) { -+ lowerdentry = ovl_lookup_real(lowerdir, &dentry->d_name); -+ err = PTR_ERR(lowerdentry); -+ if (IS_ERR(lowerdentry)) -+ goto out_dput_upper; -+ } -+ -+ if (lowerdentry && upperdentry && -+ (!S_ISDIR(upperdentry->d_inode->i_mode) || -+ !S_ISDIR(lowerdentry->d_inode->i_mode))) { -+ dput(lowerdentry); -+ lowerdentry = NULL; -+ oe->opaque = true; -+ } -+ -+ if (lowerdentry || upperdentry) { -+ struct dentry *realdentry; -+ -+ realdentry = upperdentry ? upperdentry : lowerdentry; -+ err = -ENOMEM; -+ inode = ovl_new_inode(dentry->d_sb, realdentry->d_inode->i_mode, -+ oe); -+ if (!inode) -+ goto out_dput; -+ } -+ -+ if (upperdentry) -+ oe->__upperdentry = dget(upperdentry); -+ -+ if (lowerdentry) -+ oe->lowerdentry = lowerdentry; -+ -+ dentry->d_fsdata = oe; -+ dentry->d_op = &ovl_dentry_operations; -+ d_add(dentry, inode); -+ -+ return 0; -+ -+out_dput: -+ dput(lowerdentry); -+out_dput_upper: -+ dput(upperdentry); -+out_put_dir: -+ kfree(oe); -+out: -+ return err; -+} -+ -+struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry, -+ struct nameidata *nd) -+{ -+ int err = ovl_do_lookup(dentry); -+ -+ if (err) -+ return ERR_PTR(err); -+ -+ return NULL; -+} -+ -+struct file *ovl_path_open(struct path *path, int flags) -+{ -+ path_get(path); -+ return dentry_open(path->dentry, path->mnt, flags, current_cred()); -+} -+ -+static void ovl_put_super(struct super_block *sb) -+{ -+ struct ovl_fs *ufs = sb->s_fs_info; -+ -+ if (!(sb->s_flags & MS_RDONLY)) -+ mnt_drop_write(ufs->upper_mnt); -+ -+ mntput(ufs->upper_mnt); -+ mntput(ufs->lower_mnt); -+ -+ kfree(ufs->config.lowerdir); -+ kfree(ufs->config.upperdir); -+ kfree(ufs); -+} -+ -+static int ovl_remount_fs(struct super_block *sb, int *flagsp, char *data) -+{ -+ int flags = *flagsp; -+ struct ovl_fs *ufs = sb->s_fs_info; -+ -+ /* When remounting rw or ro, we need to adjust the write access to the -+ * upper fs. -+ */ -+ if (((flags ^ sb->s_flags) & MS_RDONLY) == 0) -+ /* No change to readonly status */ -+ return 0; -+ -+ if (flags & MS_RDONLY) { -+ mnt_drop_write(ufs->upper_mnt); -+ return 0; -+ } else -+ return mnt_want_write(ufs->upper_mnt); -+} -+ -+/** -+ * ovl_statfs -+ * @sb: The overlayfs super block -+ * @buf: The struct kstatfs to fill in with stats -+ * -+ * Get the filesystem statistics. As writes always target the upper layer -+ * filesystem pass the statfs to the same filesystem. -+ */ -+static int ovl_statfs(struct dentry *dentry, struct kstatfs *buf) -+{ -+ struct dentry *root_dentry = dentry->d_sb->s_root; -+ struct path path; -+ ovl_path_upper(root_dentry, &path); -+ -+ if (!path.dentry->d_sb->s_op->statfs) -+ return -ENOSYS; -+ return path.dentry->d_sb->s_op->statfs(path.dentry, buf); -+} -+ -+/** -+ * ovl_show_options -+ * -+ * Prints the mount options for a given superblock. -+ * Returns zero; does not fail. -+ */ -+static int ovl_show_options(struct seq_file *m, struct dentry *dentry) -+{ -+ struct super_block *sb = dentry->d_sb; -+ struct ovl_fs *ufs = sb->s_fs_info; -+ -+ seq_printf(m, ",lowerdir=%s", ufs->config.lowerdir); -+ seq_printf(m, ",upperdir=%s", ufs->config.upperdir); -+ return 0; -+} -+ -+static const struct super_operations ovl_super_operations = { -+ .put_super = ovl_put_super, -+ .remount_fs = ovl_remount_fs, -+ .statfs = ovl_statfs, -+ .show_options = ovl_show_options, -+}; -+ -+enum { -+ Opt_lowerdir, -+ Opt_upperdir, -+ Opt_err, -+}; -+ -+static const match_table_t ovl_tokens = { -+ {Opt_lowerdir, "lowerdir=%s"}, -+ {Opt_upperdir, "upperdir=%s"}, -+ {Opt_err, NULL} -+}; -+ -+static int ovl_parse_opt(char *opt, struct ovl_config *config) -+{ -+ char *p; -+ -+ config->upperdir = NULL; -+ config->lowerdir = NULL; -+ -+ while ((p = strsep(&opt, ",")) != NULL) { -+ int token; -+ substring_t args[MAX_OPT_ARGS]; -+ -+ if (!*p) -+ continue; -+ -+ token = match_token(p, ovl_tokens, args); -+ switch (token) { -+ case Opt_upperdir: -+ kfree(config->upperdir); -+ config->upperdir = match_strdup(&args[0]); -+ if (!config->upperdir) -+ return -ENOMEM; -+ break; -+ -+ case Opt_lowerdir: -+ kfree(config->lowerdir); -+ config->lowerdir = match_strdup(&args[0]); -+ if (!config->lowerdir) -+ return -ENOMEM; -+ break; -+ -+ default: -+ return -EINVAL; -+ } -+ } -+ return 0; -+} -+ -+static int ovl_fill_super(struct super_block *sb, void *data, int silent) -+{ -+ struct path lowerpath; -+ struct path upperpath; -+ struct inode *root_inode; -+ struct dentry *root_dentry; -+ struct ovl_entry *oe; -+ struct ovl_fs *ufs; -+ int err; -+ -+ err = -ENOMEM; -+ ufs = kmalloc(sizeof(struct ovl_fs), GFP_KERNEL); -+ if (!ufs) -+ goto out; -+ -+ err = ovl_parse_opt((char *) data, &ufs->config); -+ if (err) -+ goto out_free_ufs; -+ -+ err = -EINVAL; -+ if (!ufs->config.upperdir || !ufs->config.lowerdir) { -+ printk(KERN_ERR "overlayfs: missing upperdir or lowerdir\n"); -+ goto out_free_config; -+ } -+ -+ oe = ovl_alloc_entry(); -+ if (oe == NULL) -+ goto out_free_config; -+ -+ root_inode = ovl_new_inode(sb, S_IFDIR, oe); -+ if (!root_inode) -+ goto out_free_oe; -+ -+ err = kern_path(ufs->config.upperdir, LOOKUP_FOLLOW, &upperpath); -+ if (err) -+ goto out_put_root; -+ -+ err = kern_path(ufs->config.lowerdir, LOOKUP_FOLLOW, &lowerpath); -+ if (err) -+ goto out_put_upperpath; -+ -+ err = -ENOTDIR; -+ if (!S_ISDIR(upperpath.dentry->d_inode->i_mode) || -+ !S_ISDIR(lowerpath.dentry->d_inode->i_mode)) -+ goto out_put_lowerpath; -+ -+ sb->s_stack_depth = max(upperpath.mnt->mnt_sb->s_stack_depth, -+ lowerpath.mnt->mnt_sb->s_stack_depth) + 1; -+ -+ err = -EINVAL; -+ if (sb->s_stack_depth > FILESYSTEM_MAX_STACK_DEPTH) { -+ printk(KERN_ERR "overlayfs: maximum fs stacking depth exceeded\n"); -+ goto out_put_lowerpath; -+ } -+ -+ -+ ufs->upper_mnt = clone_private_mount(&upperpath); -+ err = PTR_ERR(ufs->upper_mnt); -+ if (IS_ERR(ufs->upper_mnt)) { -+ printk(KERN_ERR "overlayfs: failed to clone upperpath\n"); -+ goto out_put_lowerpath; -+ } -+ -+ ufs->lower_mnt = clone_private_mount(&lowerpath); -+ err = PTR_ERR(ufs->lower_mnt); -+ if (IS_ERR(ufs->lower_mnt)) { -+ printk(KERN_ERR "overlayfs: failed to clone lowerpath\n"); -+ goto out_put_upper_mnt; -+ } -+ -+ /* -+ * Make lower_mnt R/O. That way fchmod/fchown on lower file -+ * will fail instead of modifying lower fs. -+ */ -+ ufs->lower_mnt->mnt_flags |= MNT_READONLY; -+ -+ /* If the upper fs is r/o, we mark overlayfs r/o too */ -+ if (ufs->upper_mnt->mnt_sb->s_flags & MS_RDONLY) -+ sb->s_flags |= MS_RDONLY; -+ -+ if (!(sb->s_flags & MS_RDONLY)) { -+ err = mnt_want_write(ufs->upper_mnt); -+ if (err) -+ goto out_put_lower_mnt; -+ } -+ -+ err = -ENOMEM; -+ root_dentry = d_alloc_root(root_inode); -+ if (!root_dentry) -+ goto out_drop_write; -+ -+ mntput(upperpath.mnt); -+ mntput(lowerpath.mnt); -+ -+ oe->__upperdentry = dget(upperpath.dentry); -+ oe->lowerdentry = lowerpath.dentry; -+ -+ root_dentry->d_fsdata = oe; -+ root_dentry->d_op = &ovl_dentry_operations; -+ -+ sb->s_op = &ovl_super_operations; -+ sb->s_root = root_dentry; -+ sb->s_fs_info = ufs; -+ -+ return 0; -+ -+out_drop_write: -+ if (!(sb->s_flags & MS_RDONLY)) -+ mnt_drop_write(ufs->upper_mnt); -+out_put_lower_mnt: -+ mntput(ufs->lower_mnt); -+out_put_upper_mnt: -+ mntput(ufs->upper_mnt); -+out_put_lowerpath: -+ path_put(&lowerpath); -+out_put_upperpath: -+ path_put(&upperpath); -+out_put_root: -+ iput(root_inode); -+out_free_oe: -+ kfree(oe); -+out_free_config: -+ kfree(ufs->config.lowerdir); -+ kfree(ufs->config.upperdir); -+out_free_ufs: -+ kfree(ufs); -+out: -+ return err; -+} -+ -+static struct dentry *ovl_mount(struct file_system_type *fs_type, int flags, -+ const char *dev_name, void *raw_data) -+{ -+ return mount_nodev(fs_type, flags, raw_data, ovl_fill_super); -+} -+ -+static struct file_system_type ovl_fs_type = { -+ .owner = THIS_MODULE, -+ .name = "overlayfs", -+ .mount = ovl_mount, -+ .kill_sb = kill_anon_super, -+}; -+ -+static int __init ovl_init(void) -+{ -+ return register_filesystem(&ovl_fs_type); -+} -+ -+static void __exit ovl_exit(void) -+{ -+ unregister_filesystem(&ovl_fs_type); -+} -+ -+module_init(ovl_init); -+module_exit(ovl_exit); ---- a/fs/splice.c -+++ b/fs/splice.c -@@ -1302,6 +1302,7 @@ long do_splice_direct(struct file *in, l - - return ret; - } -+EXPORT_SYMBOL(do_splice_direct); - - static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe, - struct pipe_inode_info *opipe, ---- a/include/linux/fs.h -+++ b/include/linux/fs.h -@@ -484,6 +484,12 @@ struct iattr { - */ - #include - -+/* -+ * Maximum number of layers of fs stack. Needs to be limited to -+ * prevent kernel stack overflow -+ */ -+#define FILESYSTEM_MAX_STACK_DEPTH 2 -+ - /** - * enum positive_aop_returns - aop return codes with specific semantics - * -@@ -1501,6 +1507,11 @@ struct super_block { - - /* Being remounted read-only */ - int s_readonly_remount; -+ -+ /* -+ * Indicates how deep in a filesystem stack this SB is -+ */ -+ int s_stack_depth; - }; - - /* superblock cache pruning functions */ -@@ -1658,6 +1669,8 @@ struct inode_operations { - void (*truncate_range)(struct inode *, loff_t, loff_t); - int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, - u64 len); -+ struct file *(*open) (struct dentry *, struct file *, -+ const struct cred *); - } ____cacheline_aligned; - - struct seq_file; -@@ -2028,6 +2041,7 @@ extern long do_sys_open(int dfd, const c - extern struct file *filp_open(const char *, int, umode_t); - extern struct file *file_open_root(struct dentry *, struct vfsmount *, - const char *, int); -+extern struct file *vfs_open(struct path *, struct file *, const struct cred *); - extern struct file * dentry_open(struct dentry *, struct vfsmount *, int, - const struct cred *); - extern int filp_close(struct file *, fl_owner_t id); ---- a/include/linux/mount.h -+++ b/include/linux/mount.h -@@ -66,6 +66,9 @@ extern void mnt_pin(struct vfsmount *mnt - extern void mnt_unpin(struct vfsmount *mnt); - extern int __mnt_is_readonly(struct vfsmount *mnt); - -+struct path; -+extern struct vfsmount *clone_private_mount(struct path *path); -+ - struct file_system_type; - extern struct vfsmount *vfs_kern_mount(struct file_system_type *type, - int flags, const char *name, diff --git a/target/linux/generic/patches-3.3/102-ehci_hcd_ignore_oc.patch b/target/linux/generic/patches-3.3/102-ehci_hcd_ignore_oc.patch deleted file mode 100644 index 400d2ed8e7..0000000000 --- a/target/linux/generic/patches-3.3/102-ehci_hcd_ignore_oc.patch +++ /dev/null @@ -1,41 +0,0 @@ ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -795,7 +795,7 @@ static int ehci_run (struct usb_hcd *hcd - "USB %x.%x started, EHCI %x.%02x%s\n", - ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), - temp >> 8, temp & 0xff, -- ignore_oc ? ", overcurrent ignored" : ""); -+ (ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : ""); - - ehci_writel(ehci, INTR_MASK, - &ehci->regs->intr_enable); /* Turn On Interrupts */ ---- a/drivers/usb/host/ehci-hub.c -+++ b/drivers/usb/host/ehci-hub.c -@@ -578,7 +578,7 @@ ehci_hub_status_data (struct usb_hcd *hc - * always set, seem to clear PORT_OCC and PORT_CSC when writing to - * PORT_POWER; that's surprising, but maybe within-spec. - */ -- if (!ignore_oc) -+ if (!ignore_oc && !ehci->ignore_oc) - mask = PORT_CSC | PORT_PEC | PORT_OCC; - else - mask = PORT_CSC | PORT_PEC; -@@ -803,7 +803,7 @@ static int ehci_hub_control ( - if (temp & PORT_PEC) - status |= USB_PORT_STAT_C_ENABLE << 16; - -- if ((temp & PORT_OCC) && !ignore_oc){ -+ if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){ - status |= USB_PORT_STAT_C_OVERCURRENT << 16; - - /* ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -147,6 +147,7 @@ struct ehci_hcd { /* one per controlle - unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/ - unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ - unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ -+ unsigned ignore_oc:1; - - /* required for usb32 quirk */ - #define OHCI_CTRL_HCFS (3 << 6) diff --git a/target/linux/generic/patches-3.3/110-fix_mtd_include.patch b/target/linux/generic/patches-3.3/110-fix_mtd_include.patch deleted file mode 100644 index c63dbc0596..0000000000 --- a/target/linux/generic/patches-3.3/110-fix_mtd_include.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/include/linux/mtd/physmap.h -+++ b/include/linux/mtd/physmap.h -@@ -17,6 +17,7 @@ - - #include - #include -+#include - - struct map_info; - struct platform_device; diff --git a/target/linux/generic/patches-3.3/130-pppoatm-queue-depth.patch b/target/linux/generic/patches-3.3/130-pppoatm-queue-depth.patch deleted file mode 100644 index 247a312290..0000000000 --- a/target/linux/generic/patches-3.3/130-pppoatm-queue-depth.patch +++ /dev/null @@ -1,188 +0,0 @@ -From 9d02daf754238adac48fa075ee79e7edd3d79ed3 Mon Sep 17 00:00:00 2001 -From: David Woodhouse -Date: Sun, 8 Apr 2012 09:55:43 +0000 -Subject: [PATCH] pppoatm: Fix excessive queue bloat - -We discovered that PPPoATM has an excessively deep transmit queue. A -queue the size of the default socket send buffer (wmem_default) is -maintained between the PPP generic core and the ATM device. - -Fix it to queue a maximum of *two* packets. The one the ATM device is -currently working on, and one more for the ATM driver to process -immediately in its TX done interrupt handler. The PPP core is designed -to feed packets to the channel with minimal latency, so that really -ought to be enough to keep the ATM device busy. - -While we're at it, fix the fact that we were triggering the wakeup -tasklet on *every* pppoatm_pop() call. The comment saying "this is -inefficient, but doing it right is too hard" turns out to be overly -pessimistic... I think :) - -On machines like the Traverse Geos, with a slow Geode CPU and two -high-speed ADSL2+ interfaces, there were reports of extremely high CPU -usage which could partly be attributed to the extra wakeups. - -(The wakeup handling could actually be made a whole lot easier if we - stop checking sk->sk_sndbuf altogether. Given that we now only queue - *two* packets ever, one wonders what the point is. As it is, you could - already deadlock the thing by setting the sk_sndbuf to a value lower - than the MTU of the device, and it'd just block for ever.) - -Signed-off-by: David Woodhouse -Signed-off-by: David S. Miller ---- - net/atm/pppoatm.c | 95 +++++++++++++++++++++++++++++++++++++++++++++++----- - 1 files changed, 85 insertions(+), 10 deletions(-) - ---- a/net/atm/pppoatm.c -+++ b/net/atm/pppoatm.c -@@ -62,12 +62,25 @@ struct pppoatm_vcc { - void (*old_pop)(struct atm_vcc *, struct sk_buff *); - /* keep old push/pop for detaching */ - enum pppoatm_encaps encaps; -+ atomic_t inflight; -+ unsigned long blocked; - int flags; /* SC_COMP_PROT - compress protocol */ - struct ppp_channel chan; /* interface to generic ppp layer */ - struct tasklet_struct wakeup_tasklet; - }; - - /* -+ * We want to allow two packets in the queue. The one that's currently in -+ * flight, and *one* queued up ready for the ATM device to send immediately -+ * from its TX done IRQ. We want to be able to use atomic_inc_not_zero(), so -+ * inflight == -2 represents an empty queue, -1 one packet, and zero means -+ * there are two packets in the queue. -+ */ -+#define NONE_INFLIGHT -2 -+ -+#define BLOCKED 0 -+ -+/* - * Header used for LLC Encapsulated PPP (4 bytes) followed by the LCP protocol - * ID (0xC021) used in autodetection - */ -@@ -102,16 +115,30 @@ static void pppoatm_wakeup_sender(unsign - static void pppoatm_pop(struct atm_vcc *atmvcc, struct sk_buff *skb) - { - struct pppoatm_vcc *pvcc = atmvcc_to_pvcc(atmvcc); -+ - pvcc->old_pop(atmvcc, skb); -+ atomic_dec(&pvcc->inflight); -+ - /* -- * We don't really always want to do this since it's -- * really inefficient - it would be much better if we could -- * test if we had actually throttled the generic layer. -- * Unfortunately then there would be a nasty SMP race where -- * we could clear that flag just as we refuse another packet. -- * For now we do the safe thing. -+ * We always used to run the wakeup tasklet unconditionally here, for -+ * fear of race conditions where we clear the BLOCKED flag just as we -+ * refuse another packet in pppoatm_send(). This was quite inefficient. -+ * -+ * In fact it's OK. The PPP core will only ever call pppoatm_send() -+ * while holding the channel->downl lock. And ppp_output_wakeup() as -+ * called by the tasklet will *also* grab that lock. So even if another -+ * CPU is in pppoatm_send() right now, the tasklet isn't going to race -+ * with it. The wakeup *will* happen after the other CPU is safely out -+ * of pppoatm_send() again. -+ * -+ * So if the CPU in pppoatm_send() has already set the BLOCKED bit and -+ * it about to return, that's fine. We trigger a wakeup which will -+ * happen later. And if the CPU in pppoatm_send() *hasn't* set the -+ * BLOCKED bit yet, that's fine too because of the double check in -+ * pppoatm_may_send() which is commented there. - */ -- tasklet_schedule(&pvcc->wakeup_tasklet); -+ if (test_and_clear_bit(BLOCKED, &pvcc->blocked)) -+ tasklet_schedule(&pvcc->wakeup_tasklet); - } - - /* -@@ -184,6 +211,51 @@ error: - ppp_input_error(&pvcc->chan, 0); - } - -+static inline int pppoatm_may_send(struct pppoatm_vcc *pvcc, int size) -+{ -+ /* -+ * It's not clear that we need to bother with using atm_may_send() -+ * to check we don't exceed sk->sk_sndbuf. If userspace sets a -+ * value of sk_sndbuf which is lower than the MTU, we're going to -+ * block for ever. But the code always did that before we introduced -+ * the packet count limit, so... -+ */ -+ if (atm_may_send(pvcc->atmvcc, size) && -+ atomic_inc_not_zero_hint(&pvcc->inflight, NONE_INFLIGHT)) -+ return 1; -+ -+ /* -+ * We use test_and_set_bit() rather than set_bit() here because -+ * we need to ensure there's a memory barrier after it. The bit -+ * *must* be set before we do the atomic_inc() on pvcc->inflight. -+ * There's no smp_mb__after_set_bit(), so it's this or abuse -+ * smp_mb__after_clear_bit(). -+ */ -+ test_and_set_bit(BLOCKED, &pvcc->blocked); -+ -+ /* -+ * We may have raced with pppoatm_pop(). If it ran for the -+ * last packet in the queue, *just* before we set the BLOCKED -+ * bit, then it might never run again and the channel could -+ * remain permanently blocked. Cope with that race by checking -+ * *again*. If it did run in that window, we'll have space on -+ * the queue now and can return success. It's harmless to leave -+ * the BLOCKED flag set, since it's only used as a trigger to -+ * run the wakeup tasklet. Another wakeup will never hurt. -+ * If pppoatm_pop() is running but hasn't got as far as making -+ * space on the queue yet, then it hasn't checked the BLOCKED -+ * flag yet either, so we're safe in that case too. It'll issue -+ * an "immediate" wakeup... where "immediate" actually involves -+ * taking the PPP channel's ->downl lock, which is held by the -+ * code path that calls pppoatm_send(), and is thus going to -+ * wait for us to finish. -+ */ -+ if (atm_may_send(pvcc->atmvcc, size) && -+ atomic_inc_not_zero(&pvcc->inflight)) -+ return 1; -+ -+ return 0; -+} - /* - * Called by the ppp_generic.c to send a packet - returns true if packet - * was accepted. If we return false, then it's our job to call -@@ -207,7 +279,7 @@ static int pppoatm_send(struct ppp_chann - struct sk_buff *n; - n = skb_realloc_headroom(skb, LLC_LEN); - if (n != NULL && -- !atm_may_send(pvcc->atmvcc, n->truesize)) { -+ !pppoatm_may_send(pvcc, n->truesize)) { - kfree_skb(n); - goto nospace; - } -@@ -215,12 +287,12 @@ static int pppoatm_send(struct ppp_chann - skb = n; - if (skb == NULL) - return DROP_PACKET; -- } else if (!atm_may_send(pvcc->atmvcc, skb->truesize)) -+ } else if (!pppoatm_may_send(pvcc, skb->truesize)) - goto nospace; - memcpy(skb_push(skb, LLC_LEN), pppllc, LLC_LEN); - break; - case e_vc: -- if (!atm_may_send(pvcc->atmvcc, skb->truesize)) -+ if (!pppoatm_may_send(pvcc, skb->truesize)) - goto nospace; - break; - case e_autodetect: -@@ -285,6 +357,9 @@ static int pppoatm_assign_vcc(struct atm - if (pvcc == NULL) - return -ENOMEM; - pvcc->atmvcc = atmvcc; -+ -+ /* Maximum is zero, so that we can use atomic_inc_not_zero() */ -+ atomic_set(&pvcc->inflight, NONE_INFLIGHT); - pvcc->old_push = atmvcc->push; - pvcc->old_pop = atmvcc->pop; - pvcc->encaps = (enum pppoatm_encaps) be.encaps; diff --git a/target/linux/generic/patches-3.3/131-atm-fixes.patch b/target/linux/generic/patches-3.3/131-atm-fixes.patch deleted file mode 100644 index 4d3bd4f16b..0000000000 --- a/target/linux/generic/patches-3.3/131-atm-fixes.patch +++ /dev/null @@ -1,900 +0,0 @@ -commit d7d3d8f1ee4435e32bc6c93187798b7e2e3170a9 -Author: David Woodhouse -Date: Thu Nov 29 23:28:30 2012 +0000 - - solos-pci: remove list_vccs() debugging function - - No idea why we've gone so long dumping a list of VCCs with vci==0 on - every ->open() call... - - Signed-off-by: David Woodhouse - -commit c93967bfd3a3dffa759a3f28370167bf3cdbc3d0 -Author: David Woodhouse -Date: Thu Nov 29 23:27:20 2012 +0000 - - solos-pci: use GFP_KERNEL where possible, not GFP_ATOMIC - - Signed-off-by: David Woodhouse - -commit ad6999e17ae4f7b99f6d28f425ae970acb115347 -Author: David Woodhouse -Date: Thu Nov 29 23:15:30 2012 +0000 - - solos-pci: clean up pclose() function - - - Flush pending TX skbs from the queue rather than waiting for them all to - complete (suggested by Krzysztof Mazur ). - - Clear ATM_VF_ADDR only when the PKT_PCLOSE packet has been submitted. - - Don't clear ATM_VF_READY at all — vcc_destroy_socket() does that for us. - - Signed-off-by: David Woodhouse - -commit 2547e97f29d6d69d567947d5ef90b6b4fbcaf565 -Author: David Woodhouse -Date: Wed Nov 28 10:15:05 2012 +0000 - - pppoatm: optimise PPP channel wakeups after sock_owned_by_user() - - We don't need to schedule the wakeup tasklet on *every* unlock; only if we - actually blocked the channel in the first place. - - Signed-off-by: David Woodhouse - Acked-by: Krzysztof Mazur - -commit 990b0884a2e9668c08e9daa4d70a54d65329cb6f -Author: Krzysztof Mazur -Date: Wed Nov 28 09:08:04 2012 +0100 - - br2684: allow assign only on a connected socket - - The br2684 does not check if used vcc is in connected state, - causing potential Oops in pppoatm_send() when vcc->send() is called - on not fully connected socket. - - Now br2684 can be assigned only on connected sockets; otherwise - -EINVAL error is returned. - - Signed-off-by: Krzysztof Mazur - Signed-off-by: David Woodhouse - -commit f49b6da01f0abebb17f6241473d53018d923f6b0 -Author: Nathan Williams -Date: Tue Nov 27 17:34:09 2012 +1100 - - solos-pci: Fix leak of skb received for unknown vcc - - ... and ensure that the next skb is set up for RX in the DMA case. - - Signed-off-by: Nathan Williams - Signed-off-by: David Woodhouse - -commit a61d37ff4a555886c4ebe31d2c6d893afb6f4d3c -Author: David Woodhouse -Date: Wed Nov 28 00:46:45 2012 +0000 - - br2684: fix module_put() race - - The br2684 code used module_put() during unassignment from vcc with - hope that we have BKL. This assumption is no longer true. - - Now owner field in atmvcc is used to move this module_put() - to vcc_destroy_socket(). - - Signed-off-by: David Woodhouse - Acked-by: Krzysztof Mazur - -commit c52f40629884ddc62c7af445fd5d620fdb466fb2 -Author: David Woodhouse -Date: Wed Nov 28 00:05:52 2012 +0000 - - pppoatm: fix missing wakeup in pppoatm_send() - - Now that we can return zero from pppoatm_send() for reasons *other* than - the queue being full, that means we can't depend on a subsequent call to - pppoatm_pop() waking the queue, and we might leave it stalled - indefinitely. - - Use the ->release_cb() callback to wake the queue after the sock is - unlocked. - - Signed-off-by: David Woodhouse - Acked-by: Krzysztof Mazur - -commit 35826e7372fe39b7db7930eda0267c82d68d1a4c -Author: David Woodhouse -Date: Tue Nov 27 23:28:36 2012 +0000 - - br2684: don't send frames on not-ready vcc - - Avoid submitting packets to a vcc which is being closed. Things go badly - wrong when the ->pop method gets later called after everything's been - torn down. - - Use the ATM socket lock for synchronisation with vcc_destroy_socket(), - which clears the ATM_VF_READY bit under the same lock. Otherwise, we - could end up submitting a packet to the device driver even after its - ->ops->close method has been called. And it could call the vcc's ->pop - method after the protocol has been shut down. Which leads to a panic. - - Signed-off-by: David Woodhouse - Acked-by: Krzysztof Mazur - -commit 7f940dde65de4a707f3dd723bb6ce9de90ca1eab -Author: David Woodhouse -Date: Wed Nov 28 00:03:11 2012 +0000 - - atm: add release_cb() callback to vcc - - The immediate use case for this is that it will allow us to ensure that a - pppoatm queue is woken after it has to drop a packet due to the sock being - locked. - - Note that 'release_cb' is called when the socket is *unlocked*. This is - not to be confused with vcc_release() — which probably ought to be called - vcc_close(). - - Signed-off-by: David Woodhouse - Acked-by: Krzysztof Mazur - -commit def1b2f9083f84d0a77730e537c76429914d17c1 -Author: David Woodhouse -Date: Tue Nov 27 23:49:24 2012 +0000 - - solos-pci: wait for pending TX to complete when releasing vcc - - We should no longer be calling the old pop routine for the vcc, after - vcc_release() has completed. Make sure we wait for any pending TX skbs - to complete, by waiting for our own PKT_PCLOSE control skb to be sent. - - Signed-off-by: David Woodhouse - -commit 397ff16dce53888ec693b3718640be2560204751 -Author: Krzysztof Mazur -Date: Tue Nov 6 23:17:02 2012 +0100 - - pppoatm: do not inline pppoatm_may_send() - - The pppoatm_may_send() is quite heavy and it's called three times - in pppoatm_send() and inlining costs more than 200 bytes of code - (more than 10% of total pppoatm driver code size). - - add/remove: 1/0 grow/shrink: 0/1 up/down: 132/-367 (-235) - function old new delta - pppoatm_may_send - 132 +132 - pppoatm_send 900 533 -367 - - Signed-off-by: Krzysztof Mazur - Signed-off-by: David Woodhouse - -commit 071d93931a75dc1f82f0baa9959613af81c5a032 -Author: Krzysztof Mazur -Date: Sat Nov 10 23:33:19 2012 +0100 - - pppoatm: drop frames to not-ready vcc - - The vcc_destroy_socket() closes vcc before the protocol is detached - from vcc by calling vcc->push() with NULL skb. This leaves some time - window, where the protocol may call vcc->send() on closed vcc - and crash. - - Now pppoatm_send(), like vcc_sendmsg(), checks for vcc flags that - indicate that vcc is not ready. If the vcc is not ready we just - drop frame. Queueing frames is much more complicated because we - don't have callbacks that inform us about vcc flags changes. - - Signed-off-by: Krzysztof Mazur - Signed-off-by: David Woodhouse - -commit 3ac108006fd7f20cb8fc8ea2287f1497bcda00a1 -Author: Krzysztof Mazur -Date: Tue Nov 6 23:17:00 2012 +0100 - - pppoatm: take ATM socket lock in pppoatm_send() - - The pppoatm_send() does not take any lock that will prevent concurrent - vcc_sendmsg(). This causes two problems: - - - there is no locking between checking the send queue size - with atm_may_send() and incrementing sk_wmem_alloc, - and the real queue size can be a little higher than sk_sndbuf - - - the vcc->sendmsg() can be called concurrently. I'm not sure - if it's allowed. Some drivers (eni, nicstar, ...) seem - to assume it will never happen. - - Now pppoatm_send() takes ATM socket lock, the same that is used - in vcc_sendmsg() and other ATM socket functions. The pppoatm_send() - is called with BH disabled, so bh_lock_sock() is used instead - of lock_sock(). - - Signed-off-by: Krzysztof Mazur - Cc: Chas Williams - CONTRACTOR - Signed-off-by: David Woodhouse - -commit e41faed9cde1acce657f75a0b19a1787e9850d3f -Author: Krzysztof Mazur -Date: Tue Nov 6 23:16:59 2012 +0100 - - pppoatm: fix module_put() race - - The pppoatm used module_put() during unassignment from vcc with - hope that we have BKL. This assumption is no longer true. - - Now owner field in atmvcc is used to move this module_put() - to vcc_destroy_socket(). - - Signed-off-by: Krzysztof Mazur - Signed-off-by: David Woodhouse - -commit 3b1a914595f3f9beb9e38ff3ddc7bdafa092ba22 -Author: Krzysztof Mazur -Date: Tue Nov 6 23:16:58 2012 +0100 - - pppoatm: allow assign only on a connected socket - - The pppoatm does not check if used vcc is in connected state, - causing an Oops in pppoatm_send() when vcc->send() is called - on not fully connected socket. - - Now pppoatm can be assigned only on connected sockets; otherwise - -EINVAL error is returned. - - Signed-off-by: Krzysztof Mazur - Cc: Chas Williams - CONTRACTOR - Signed-off-by: David Woodhouse - -commit ec809bd817dfa1905283468e4c813684ed4efe78 -Author: Krzysztof Mazur -Date: Tue Nov 6 23:16:57 2012 +0100 - - atm: add owner of push() callback to atmvcc - - The atm is using atmvcc->push(vcc, NULL) callback to notify protocol - that vcc will be closed and protocol must detach from it. This callback - is usually used by protocol to decrement module usage count by module_put(), - but it leaves small window then module is still used after module_put(). - - Now the owner of push() callback is kept in atmvcc and - module_put(atmvcc->owner) is called after the protocol is detached from vcc. - - Signed-off-by: Krzysztof Mazur - Signed-off-by: David Woodhouse - Acked-by: Chas Williams - -commit ae088d663beebb3cad0e7abaac67ee61a7c578d5 -Author: David Woodhouse -Date: Sun Nov 25 12:06:52 2012 +0000 - - atm: br2684: Fix excessive queue bloat - - There's really no excuse for an additional wmem_default of buffering - between the netdev queue and the ATM device. Two packets (one in-flight, - and one ready to send) ought to be fine. It's not as if it should take - long to get another from the netdev queue when we need it. - - If necessary we can make the queue space configurable later, but I don't - think it's likely to be necessary. - - cf. commit 9d02daf754238adac48fa075ee79e7edd3d79ed3 (pppoatm: Fix - excessive queue bloat) which did something very similar for PPPoATM. - - Note that there is a tremendously unlikely race condition which may - result in qspace temporarily going negative. If a CPU running the - br2684_pop() function goes off into the weeds for a long period of time - after incrementing qspace to 1, but before calling netdev_wake_queue()... - and another CPU ends up calling br2684_start_xmit() and *stopping* the - queue again before the first CPU comes back, the netdev queue could - end up being woken when qspace has already reached zero. - - An alternative approach to coping with this race would be to check in - br2684_start_xmit() for qspace==0 and return NETDEV_TX_BUSY, but just - using '> 0' and '< 1' for comparison instead of '== 0' and '!= 0' is - simpler. It just warranted a mention of *why* we do it that way... - - Move the call to atmvcc->send() to happen *after* the accounting and - potentially stopping the netdev queue, in br2684_xmit_vcc(). This matters - if the ->send() call suffers an immediate failure, because it'll call - br2684_pop() with the offending skb before returning. We want that to - happen *after* we've done the initial accounting for the packet in - question. Also make it return an appropriate success/failure indication - while we're at it. - - Tested by running 'ping -l 1000 bottomless.aaisp.net.uk' from within my - network, with only a single PPPoE-over-BR2684 link running. And after - setting txqueuelen on the nas0 interface to something low (5, in fact). - Before the patch, we'd see about 15 packets being queued and a resulting - latency of ~56ms being reached. After the patch, we see only about 8, - which is fairly much what we expect. And a max latency of ~36ms. On this - OpenWRT box, wmem_default is 163840. - - Signed-off-by: David Woodhouse - Reviewed-by: Krzysztof Mazur - Signed-off-by: David S. Miller - ---- a/drivers/atm/solos-pci.c -+++ b/drivers/atm/solos-pci.c -@@ -92,6 +92,7 @@ struct pkt_hdr { - }; - - struct solos_skb_cb { -+ struct completion c; - struct atm_vcc *vcc; - uint32_t dma_addr; - }; -@@ -164,7 +165,6 @@ static void fpga_queue(struct solos_card - static uint32_t fpga_tx(struct solos_card *); - static irqreturn_t solos_irq(int irq, void *dev_id); - static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci); --static int list_vccs(int vci); - static int atm_init(struct solos_card *, struct device *); - static void atm_remove(struct solos_card *); - static int send_command(struct solos_card *card, int dev, const char *buf, size_t size); -@@ -710,7 +710,8 @@ void solos_bh(unsigned long card_arg) - dev_warn(&card->dev->dev, "Received packet for unknown VPI.VCI %d.%d on port %d\n", - le16_to_cpu(header->vpi), le16_to_cpu(header->vci), - port); -- continue; -+ dev_kfree_skb_any(skb); -+ break; - } - atm_charge(vcc, skb->truesize); - vcc->push(vcc, skb); -@@ -790,44 +791,6 @@ static struct atm_vcc *find_vcc(struct a - return vcc; - } - --static int list_vccs(int vci) --{ -- struct hlist_head *head; -- struct atm_vcc *vcc; -- struct hlist_node *node; -- struct sock *s; -- int num_found = 0; -- int i; -- -- read_lock(&vcc_sklist_lock); -- if (vci != 0){ -- head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)]; -- sk_for_each(s, node, head) { -- num_found ++; -- vcc = atm_sk(s); -- printk(KERN_DEBUG "Device: %d Vpi: %d Vci: %d\n", -- vcc->dev->number, -- vcc->vpi, -- vcc->vci); -- } -- } else { -- for(i = 0; i < VCC_HTABLE_SIZE; i++){ -- head = &vcc_hash[i]; -- sk_for_each(s, node, head) { -- num_found ++; -- vcc = atm_sk(s); -- printk(KERN_DEBUG "Device: %d Vpi: %d Vci: %d\n", -- vcc->dev->number, -- vcc->vpi, -- vcc->vci); -- } -- } -- } -- read_unlock(&vcc_sklist_lock); -- return num_found; --} -- -- - static int popen(struct atm_vcc *vcc) - { - struct solos_card *card = vcc->dev->dev_data; -@@ -840,7 +803,7 @@ static int popen(struct atm_vcc *vcc) - return -EINVAL; - } - -- skb = alloc_skb(sizeof(*header), GFP_ATOMIC); -+ skb = alloc_skb(sizeof(*header), GFP_KERNEL); - if (!skb) { - if (net_ratelimit()) - dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n"); -@@ -857,8 +820,6 @@ static int popen(struct atm_vcc *vcc) - - set_bit(ATM_VF_ADDR, &vcc->flags); - set_bit(ATM_VF_READY, &vcc->flags); -- list_vccs(0); -- - - return 0; - } -@@ -866,10 +827,21 @@ static int popen(struct atm_vcc *vcc) - static void pclose(struct atm_vcc *vcc) - { - struct solos_card *card = vcc->dev->dev_data; -- struct sk_buff *skb; -+ unsigned char port = SOLOS_CHAN(vcc->dev); -+ struct sk_buff *skb, *tmpskb; - struct pkt_hdr *header; - -- skb = alloc_skb(sizeof(*header), GFP_ATOMIC); -+ /* Remove any yet-to-be-transmitted packets from the pending queue */ -+ spin_lock(&card->tx_queue_lock); -+ skb_queue_walk_safe(&card->tx_queue[port], skb, tmpskb) { -+ if (SKB_CB(skb)->vcc == vcc) { -+ skb_unlink(skb, &card->tx_queue[port]); -+ solos_pop(vcc, skb); -+ } -+ } -+ spin_unlock(&card->tx_queue_lock); -+ -+ skb = alloc_skb(sizeof(*header), GFP_KERNEL); - if (!skb) { - dev_warn(&card->dev->dev, "Failed to allocate sk_buff in pclose()\n"); - return; -@@ -881,15 +853,21 @@ static void pclose(struct atm_vcc *vcc) - header->vci = cpu_to_le16(vcc->vci); - header->type = cpu_to_le16(PKT_PCLOSE); - -- fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL); -+ init_completion(&SKB_CB(skb)->c); - -- clear_bit(ATM_VF_ADDR, &vcc->flags); -- clear_bit(ATM_VF_READY, &vcc->flags); -+ fpga_queue(card, port, skb, NULL); -+ -+ if (!wait_for_completion_timeout(&SKB_CB(skb)->c, 5 * HZ)) -+ dev_warn(&card->dev->dev, "Timeout waiting for VCC close on port %d\n", -+ port); - - /* Hold up vcc_destroy_socket() (our caller) until solos_bh() in the - tasklet has finished processing any incoming packets (and, more to - the point, using the vcc pointer). */ - tasklet_unlock_wait(&card->tlet); -+ -+ clear_bit(ATM_VF_ADDR, &vcc->flags); -+ - return; - } - -@@ -1010,9 +988,12 @@ static uint32_t fpga_tx(struct solos_car - if (vcc) { - atomic_inc(&vcc->stats->tx); - solos_pop(vcc, oldskb); -- } else -+ } else { -+ struct pkt_hdr *header = (void *)oldskb->data; -+ if (le16_to_cpu(header->type) == PKT_PCLOSE) -+ complete(&SKB_CB(oldskb)->c); - dev_kfree_skb_irq(oldskb); -- -+ } - } - } - /* For non-DMA TX, write the 'TX start' bit for all four ports simultaneously */ -@@ -1246,7 +1227,7 @@ static int atm_init(struct solos_card *c - card->atmdev[i]->phy_data = (void *)(unsigned long)i; - atm_dev_signal_change(card->atmdev[i], ATM_PHY_SIG_FOUND); - -- skb = alloc_skb(sizeof(*header), GFP_ATOMIC); -+ skb = alloc_skb(sizeof(*header), GFP_KERNEL); - if (!skb) { - dev_warn(&card->dev->dev, "Failed to allocate sk_buff in atm_init()\n"); - continue; -@@ -1343,6 +1324,8 @@ static struct pci_driver fpga_driver = { - - static int __init solos_pci_init(void) - { -+ BUILD_BUG_ON(sizeof(struct solos_skb_cb) > sizeof(((struct sk_buff *)0)->cb)); -+ - printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION); - return pci_register_driver(&fpga_driver); - } ---- a/include/linux/atmdev.h -+++ b/include/linux/atmdev.h -@@ -307,6 +307,7 @@ struct atm_vcc { - struct atm_dev *dev; /* device back pointer */ - struct atm_qos qos; /* QOS */ - struct atm_sap sap; /* SAP */ -+ void (*release_cb)(struct atm_vcc *vcc); /* release_sock callback */ - void (*push)(struct atm_vcc *vcc,struct sk_buff *skb); - void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */ - int (*push_oam)(struct atm_vcc *vcc,void *cell); -@@ -314,6 +315,7 @@ struct atm_vcc { - void *dev_data; /* per-device data */ - void *proto_data; /* per-protocol data */ - struct k_atm_aal_stats *stats; /* pointer to AAL stats group */ -+ struct module *owner; /* owner of ->push function */ - /* SVC part --- may move later ------------------------------------- */ - short itf; /* interface number */ - struct sockaddr_atmsvc local; ---- a/net/atm/br2684.c -+++ b/net/atm/br2684.c -@@ -68,12 +68,15 @@ struct br2684_vcc { - /* keep old push, pop functions for chaining */ - void (*old_push)(struct atm_vcc *vcc, struct sk_buff *skb); - void (*old_pop)(struct atm_vcc *vcc, struct sk_buff *skb); -+ void (*old_release_cb)(struct atm_vcc *vcc); -+ struct module *old_owner; - enum br2684_encaps encaps; - struct list_head brvccs; - #ifdef CONFIG_ATM_BR2684_IPFILTER - struct br2684_filter filter; - #endif /* CONFIG_ATM_BR2684_IPFILTER */ - unsigned copies_needed, copies_failed; -+ atomic_t qspace; - }; - - struct br2684_dev { -@@ -181,18 +184,15 @@ static struct notifier_block atm_dev_not - static void br2684_pop(struct atm_vcc *vcc, struct sk_buff *skb) - { - struct br2684_vcc *brvcc = BR2684_VCC(vcc); -- struct net_device *net_dev = skb->dev; - -- pr_debug("(vcc %p ; net_dev %p )\n", vcc, net_dev); -+ pr_debug("(vcc %p ; net_dev %p )\n", vcc, brvcc->device); - brvcc->old_pop(vcc, skb); - -- if (!net_dev) -- return; -- -- if (atm_may_send(vcc, 0)) -- netif_wake_queue(net_dev); -- -+ /* If the queue space just went up from zero, wake */ -+ if (atomic_inc_return(&brvcc->qspace) == 1) -+ netif_wake_queue(brvcc->device); - } -+ - /* - * Send a packet out a particular vcc. Not to useful right now, but paves - * the way for multiple vcc's per itf. Returns true if we can send, -@@ -256,16 +256,30 @@ static int br2684_xmit_vcc(struct sk_buf - ATM_SKB(skb)->atm_options = atmvcc->atm_options; - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; -- atmvcc->send(atmvcc, skb); - -- if (!atm_may_send(atmvcc, 0)) { -+ if (atomic_dec_return(&brvcc->qspace) < 1) { -+ /* No more please! */ - netif_stop_queue(brvcc->device); -- /*check for race with br2684_pop*/ -- if (atm_may_send(atmvcc, 0)) -- netif_start_queue(brvcc->device); -+ /* We might have raced with br2684_pop() */ -+ if (unlikely(atomic_read(&brvcc->qspace) > 0)) -+ netif_wake_queue(brvcc->device); - } - -- return 1; -+ /* If this fails immediately, the skb will be freed and br2684_pop() -+ will wake the queue if appropriate. Just return an error so that -+ the stats are updated correctly */ -+ return !atmvcc->send(atmvcc, skb); -+} -+ -+static void br2684_release_cb(struct atm_vcc *atmvcc) -+{ -+ struct br2684_vcc *brvcc = BR2684_VCC(atmvcc); -+ -+ if (atomic_read(&brvcc->qspace) > 0) -+ netif_wake_queue(brvcc->device); -+ -+ if (brvcc->old_release_cb) -+ brvcc->old_release_cb(atmvcc); - } - - static inline struct br2684_vcc *pick_outgoing_vcc(const struct sk_buff *skb, -@@ -279,6 +293,8 @@ static netdev_tx_t br2684_start_xmit(str - { - struct br2684_dev *brdev = BRPRIV(dev); - struct br2684_vcc *brvcc; -+ struct atm_vcc *atmvcc; -+ netdev_tx_t ret = NETDEV_TX_OK; - - pr_debug("skb_dst(skb)=%p\n", skb_dst(skb)); - read_lock(&devs_lock); -@@ -289,9 +305,26 @@ static netdev_tx_t br2684_start_xmit(str - dev->stats.tx_carrier_errors++; - /* netif_stop_queue(dev); */ - dev_kfree_skb(skb); -- read_unlock(&devs_lock); -- return NETDEV_TX_OK; -+ goto out_devs; - } -+ atmvcc = brvcc->atmvcc; -+ -+ bh_lock_sock(sk_atm(atmvcc)); -+ -+ if (test_bit(ATM_VF_RELEASED, &atmvcc->flags) || -+ test_bit(ATM_VF_CLOSE, &atmvcc->flags) || -+ !test_bit(ATM_VF_READY, &atmvcc->flags)) { -+ dev->stats.tx_dropped++; -+ dev_kfree_skb(skb); -+ goto out; -+ } -+ -+ if (sock_owned_by_user(sk_atm(atmvcc))) { -+ netif_stop_queue(brvcc->device); -+ ret = NETDEV_TX_BUSY; -+ goto out; -+ } -+ - if (!br2684_xmit_vcc(skb, dev, brvcc)) { - /* - * We should probably use netif_*_queue() here, but that -@@ -303,8 +336,11 @@ static netdev_tx_t br2684_start_xmit(str - dev->stats.tx_errors++; - dev->stats.tx_fifo_errors++; - } -+ out: -+ bh_unlock_sock(sk_atm(atmvcc)); -+ out_devs: - read_unlock(&devs_lock); -- return NETDEV_TX_OK; -+ return ret; - } - - /* -@@ -377,9 +413,10 @@ static void br2684_close_vcc(struct br26 - list_del(&brvcc->brvccs); - write_unlock_irq(&devs_lock); - brvcc->atmvcc->user_back = NULL; /* what about vcc->recvq ??? */ -+ brvcc->atmvcc->release_cb = brvcc->old_release_cb; - brvcc->old_push(brvcc->atmvcc, NULL); /* pass on the bad news */ -+ module_put(brvcc->old_owner); - kfree(brvcc); -- module_put(THIS_MODULE); - } - - /* when AAL5 PDU comes in: */ -@@ -504,6 +541,13 @@ static int br2684_regvcc(struct atm_vcc - brvcc = kzalloc(sizeof(struct br2684_vcc), GFP_KERNEL); - if (!brvcc) - return -ENOMEM; -+ /* -+ * Allow two packets in the ATM queue. One actually being sent, and one -+ * for the ATM 'TX done' handler to send. It shouldn't take long to get -+ * the next one from the netdev queue, when we need it. More than that -+ * would be bufferbloat. -+ */ -+ atomic_set(&brvcc->qspace, 2); - write_lock_irq(&devs_lock); - net_dev = br2684_find_dev(&be.ifspec); - if (net_dev == NULL) { -@@ -546,9 +590,13 @@ static int br2684_regvcc(struct atm_vcc - brvcc->encaps = (enum br2684_encaps)be.encaps; - brvcc->old_push = atmvcc->push; - brvcc->old_pop = atmvcc->pop; -+ brvcc->old_release_cb = atmvcc->release_cb; -+ brvcc->old_owner = atmvcc->owner; - barrier(); - atmvcc->push = br2684_push; - atmvcc->pop = br2684_pop; -+ atmvcc->release_cb = br2684_release_cb; -+ atmvcc->owner = THIS_MODULE; - - /* initialize netdev carrier state */ - if (atmvcc->dev->signal == ATM_PHY_SIG_LOST) -@@ -687,10 +735,13 @@ static int br2684_ioctl(struct socket *s - return -ENOIOCTLCMD; - if (!capable(CAP_NET_ADMIN)) - return -EPERM; -- if (cmd == ATM_SETBACKEND) -+ if (cmd == ATM_SETBACKEND) { -+ if (sock->state != SS_CONNECTED) -+ return -EINVAL; - return br2684_regvcc(atmvcc, argp); -- else -+ } else { - return br2684_create(argp); -+ } - #ifdef CONFIG_ATM_BR2684_IPFILTER - case BR2684_SETFILT: - if (atmvcc->push != br2684_push) ---- a/net/atm/common.c -+++ b/net/atm/common.c -@@ -126,10 +126,19 @@ static void vcc_write_space(struct sock - rcu_read_unlock(); - } - -+static void vcc_release_cb(struct sock *sk) -+{ -+ struct atm_vcc *vcc = atm_sk(sk); -+ -+ if (vcc->release_cb) -+ vcc->release_cb(vcc); -+} -+ - static struct proto vcc_proto = { - .name = "VCC", - .owner = THIS_MODULE, - .obj_size = sizeof(struct atm_vcc), -+ .release_cb = vcc_release_cb, - }; - - int vcc_create(struct net *net, struct socket *sock, int protocol, int family) -@@ -156,7 +165,9 @@ int vcc_create(struct net *net, struct s - atomic_set(&sk->sk_rmem_alloc, 0); - vcc->push = NULL; - vcc->pop = NULL; -+ vcc->owner = NULL; - vcc->push_oam = NULL; -+ vcc->release_cb = NULL; - vcc->vpi = vcc->vci = 0; /* no VCI/VPI yet */ - vcc->atm_options = vcc->aal_options = 0; - sk->sk_destruct = vcc_sock_destruct; -@@ -175,6 +186,7 @@ static void vcc_destroy_socket(struct so - vcc->dev->ops->close(vcc); - if (vcc->push) - vcc->push(vcc, NULL); /* atmarpd has no push */ -+ module_put(vcc->owner); - - while ((skb = skb_dequeue(&sk->sk_receive_queue)) != NULL) { - atm_return(vcc, skb->truesize); ---- a/net/atm/pppoatm.c -+++ b/net/atm/pppoatm.c -@@ -60,6 +60,8 @@ struct pppoatm_vcc { - struct atm_vcc *atmvcc; /* VCC descriptor */ - void (*old_push)(struct atm_vcc *, struct sk_buff *); - void (*old_pop)(struct atm_vcc *, struct sk_buff *); -+ void (*old_release_cb)(struct atm_vcc *); -+ struct module *old_owner; - /* keep old push/pop for detaching */ - enum pppoatm_encaps encaps; - atomic_t inflight; -@@ -107,6 +109,24 @@ static void pppoatm_wakeup_sender(unsign - ppp_output_wakeup((struct ppp_channel *) arg); - } - -+static void pppoatm_release_cb(struct atm_vcc *atmvcc) -+{ -+ struct pppoatm_vcc *pvcc = atmvcc_to_pvcc(atmvcc); -+ -+ /* -+ * As in pppoatm_pop(), it's safe to clear the BLOCKED bit here because -+ * the wakeup *can't* race with pppoatm_send(). They both hold the PPP -+ * channel's ->downl lock. And the potential race with *setting* it, -+ * which leads to the double-check dance in pppoatm_may_send(), doesn't -+ * exist here. In the sock_owned_by_user() case in pppoatm_send(), we -+ * set the BLOCKED bit while the socket is still locked. We know that -+ * ->release_cb() can't be called until that's done. -+ */ -+ if (test_and_clear_bit(BLOCKED, &pvcc->blocked)) -+ tasklet_schedule(&pvcc->wakeup_tasklet); -+ if (pvcc->old_release_cb) -+ pvcc->old_release_cb(atmvcc); -+} - /* - * This gets called every time the ATM card has finished sending our - * skb. The ->old_pop will take care up normal atm flow control, -@@ -151,12 +171,11 @@ static void pppoatm_unassign_vcc(struct - pvcc = atmvcc_to_pvcc(atmvcc); - atmvcc->push = pvcc->old_push; - atmvcc->pop = pvcc->old_pop; -+ atmvcc->release_cb = pvcc->old_release_cb; - tasklet_kill(&pvcc->wakeup_tasklet); - ppp_unregister_channel(&pvcc->chan); - atmvcc->user_back = NULL; - kfree(pvcc); -- /* Gee, I hope we have the big kernel lock here... */ -- module_put(THIS_MODULE); - } - - /* Called when an AAL5 PDU comes in */ -@@ -165,9 +184,13 @@ static void pppoatm_push(struct atm_vcc - struct pppoatm_vcc *pvcc = atmvcc_to_pvcc(atmvcc); - pr_debug("\n"); - if (skb == NULL) { /* VCC was closed */ -+ struct module *module; -+ - pr_debug("removing ATMPPP VCC %p\n", pvcc); -+ module = pvcc->old_owner; - pppoatm_unassign_vcc(atmvcc); - atmvcc->push(atmvcc, NULL); /* Pass along bad news */ -+ module_put(module); - return; - } - atm_return(atmvcc, skb->truesize); -@@ -211,7 +234,7 @@ error: - ppp_input_error(&pvcc->chan, 0); - } - --static inline int pppoatm_may_send(struct pppoatm_vcc *pvcc, int size) -+static int pppoatm_may_send(struct pppoatm_vcc *pvcc, int size) - { - /* - * It's not clear that we need to bother with using atm_may_send() -@@ -269,10 +292,33 @@ static inline int pppoatm_may_send(struc - static int pppoatm_send(struct ppp_channel *chan, struct sk_buff *skb) - { - struct pppoatm_vcc *pvcc = chan_to_pvcc(chan); -+ struct atm_vcc *vcc; -+ int ret; -+ - ATM_SKB(skb)->vcc = pvcc->atmvcc; - pr_debug("(skb=0x%p, vcc=0x%p)\n", skb, pvcc->atmvcc); - if (skb->data[0] == '\0' && (pvcc->flags & SC_COMP_PROT)) - (void) skb_pull(skb, 1); -+ -+ vcc = ATM_SKB(skb)->vcc; -+ bh_lock_sock(sk_atm(vcc)); -+ if (sock_owned_by_user(sk_atm(vcc))) { -+ /* -+ * Needs to happen (and be flushed, hence test_and_) before we unlock -+ * the socket. It needs to be seen by the time our ->release_cb gets -+ * called. -+ */ -+ test_and_set_bit(BLOCKED, &pvcc->blocked); -+ goto nospace; -+ } -+ if (test_bit(ATM_VF_RELEASED, &vcc->flags) || -+ test_bit(ATM_VF_CLOSE, &vcc->flags) || -+ !test_bit(ATM_VF_READY, &vcc->flags)) { -+ bh_unlock_sock(sk_atm(vcc)); -+ kfree_skb(skb); -+ return DROP_PACKET; -+ } -+ - switch (pvcc->encaps) { /* LLC encapsulation needed */ - case e_llc: - if (skb_headroom(skb) < LLC_LEN) { -@@ -285,8 +331,10 @@ static int pppoatm_send(struct ppp_chann - } - kfree_skb(skb); - skb = n; -- if (skb == NULL) -+ if (skb == NULL) { -+ bh_unlock_sock(sk_atm(vcc)); - return DROP_PACKET; -+ } - } else if (!pppoatm_may_send(pvcc, skb->truesize)) - goto nospace; - memcpy(skb_push(skb, LLC_LEN), pppllc, LLC_LEN); -@@ -296,6 +344,7 @@ static int pppoatm_send(struct ppp_chann - goto nospace; - break; - case e_autodetect: -+ bh_unlock_sock(sk_atm(vcc)); - pr_debug("Trying to send without setting encaps!\n"); - kfree_skb(skb); - return 1; -@@ -305,9 +354,12 @@ static int pppoatm_send(struct ppp_chann - ATM_SKB(skb)->atm_options = ATM_SKB(skb)->vcc->atm_options; - pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", - skb, ATM_SKB(skb)->vcc, ATM_SKB(skb)->vcc->dev); -- return ATM_SKB(skb)->vcc->send(ATM_SKB(skb)->vcc, skb) -+ ret = ATM_SKB(skb)->vcc->send(ATM_SKB(skb)->vcc, skb) - ? DROP_PACKET : 1; -+ bh_unlock_sock(sk_atm(vcc)); -+ return ret; - nospace: -+ bh_unlock_sock(sk_atm(vcc)); - /* - * We don't have space to send this SKB now, but we might have - * already applied SC_COMP_PROT compression, so may need to undo -@@ -362,6 +414,8 @@ static int pppoatm_assign_vcc(struct atm - atomic_set(&pvcc->inflight, NONE_INFLIGHT); - pvcc->old_push = atmvcc->push; - pvcc->old_pop = atmvcc->pop; -+ pvcc->old_owner = atmvcc->owner; -+ pvcc->old_release_cb = atmvcc->release_cb; - pvcc->encaps = (enum pppoatm_encaps) be.encaps; - pvcc->chan.private = pvcc; - pvcc->chan.ops = &pppoatm_ops; -@@ -377,7 +431,9 @@ static int pppoatm_assign_vcc(struct atm - atmvcc->user_back = pvcc; - atmvcc->push = pppoatm_push; - atmvcc->pop = pppoatm_pop; -+ atmvcc->release_cb = pppoatm_release_cb; - __module_get(THIS_MODULE); -+ atmvcc->owner = THIS_MODULE; - - /* re-process everything received between connection setup and - backend setup */ -@@ -406,6 +462,8 @@ static int pppoatm_ioctl(struct socket * - return -ENOIOCTLCMD; - if (!capable(CAP_NET_ADMIN)) - return -EPERM; -+ if (sock->state != SS_CONNECTED) -+ return -EINVAL; - return pppoatm_assign_vcc(atmvcc, argp); - } - case PPPIOCGCHAN: diff --git a/target/linux/generic/patches-3.3/132-solos-dma.patch b/target/linux/generic/patches-3.3/132-solos-dma.patch deleted file mode 100644 index beba891250..0000000000 --- a/target/linux/generic/patches-3.3/132-solos-dma.patch +++ /dev/null @@ -1,442 +0,0 @@ -commit b4bd8ad9bb311e8536f726f7a633620ccd358cde -Author: David Woodhouse -Date: Thu May 24 04:58:27 2012 +0000 - - solos-pci: Fix DMA support - - DMA support has finally made its way to the top of the TODO list, having - realised that a Geode using MMIO can't keep up with two ADSL2+ lines - each running at 21Mb/s. - - This patch fixes a couple of bugs in the DMA support in the driver, so - once the corresponding FPGA update is complete and tested everything - should work properly. - - We weren't storing the currently-transmitting skb, so we were never - unmapping it and never freeing/popping it when the TX was done. - And the addition of pci_set_master() is fairly self-explanatory. - - Signed-off-by: David Woodhouse - Cc: stable@kernel.org - Signed-off-by: David S. Miller - -commit 152a2a8b5e1d4cbe91a7c66f1028db15164a3766 -Author: David Woodhouse -Date: Wed Dec 19 11:01:21 2012 +0000 - - solos-pci: ensure all TX packets are aligned to 4 bytes - - The FPGA can't handled unaligned DMA (yet). So copy into an aligned buffer, - if skb->data isn't suitably aligned. - - Signed-off-by: David Woodhouse - Signed-off-by: David S. Miller - -commit 13af816469db3449c072afbae6c4c1bd9ccecccb -Author: Nathan Williams -Date: Wed Dec 19 11:01:20 2012 +0000 - - solos-pci: add firmware upgrade support for new models - - Signed-off-by: Nathan Williams - Signed-off-by: David Woodhouse - Signed-off-by: David S. Miller - -commit 7fbdadb5e951e4f0c0fc991ff5f50295568786e6 -Author: Nathan Williams -Date: Wed Dec 19 11:01:19 2012 +0000 - - solos-pci: remove superfluous debug output - - Signed-off-by: Nathan Williams - Signed-off-by: David Woodhouse - Signed-off-by: David S. Miller - -commit f9baad02e7411d9f38d5ebe1a1cdcde4ceec100d -Author: Nathan Williams -Date: Wed Dec 19 11:01:18 2012 +0000 - - solos-pci: add GPIO support for newer versions on Geos board - - dwmw2: Tidy up a little, simpler matching on which GPIO is being accessed, - only register on newer boards, register under PCI device instead of - duplicating them under each ATM device. - - Signed-off-by: Nathan Williams - Signed-off-by: David Woodhouse - Signed-off-by: David S. Miller - -commit cae49ede00ec3d0cda290b03fee55b72b49efc11 -Author: David Woodhouse -Date: Tue Dec 11 14:57:14 2012 +0000 - - solos-pci: fix double-free of TX skb in DMA mode - - We weren't clearing card->tx_skb[port] when processing the TX done interrupt. - If there wasn't another skb ready to transmit immediately, this led to a - double-free because we'd free it *again* next time we did have a packet to - send. - - Signed-off-by: David Woodhouse - Cc: stable@kernel.org - Signed-off-by: David S. Miller - -== -There is a typo here so we do a double lock instead of an unlock. - -Signed-off-by: Dan Carpenter ---- -Only needed in linux-next. Introduced in f9baad02e7411d9 [14/17] -solos-pci: add GPIO support for newer versions on Geos board - - ---- a/drivers/atm/solos-pci.c -+++ b/drivers/atm/solos-pci.c -@@ -42,7 +42,8 @@ - #include - #include - --#define VERSION "0.07" -+#define VERSION "1.04" -+#define DRIVER_VERSION 0x01 - #define PTAG "solos-pci" - - #define CONFIG_RAM_SIZE 128 -@@ -56,16 +57,21 @@ - #define FLASH_BUSY 0x60 - #define FPGA_MODE 0x5C - #define FLASH_MODE 0x58 -+#define GPIO_STATUS 0x54 -+#define DRIVER_VER 0x50 - #define TX_DMA_ADDR(port) (0x40 + (4 * (port))) - #define RX_DMA_ADDR(port) (0x30 + (4 * (port))) - - #define DATA_RAM_SIZE 32768 - #define BUF_SIZE 2048 - #define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/ --#define FPGA_PAGE 528 /* FPGA flash page size*/ --#define SOLOS_PAGE 512 /* Solos flash page size*/ --#define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/ --#define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/ -+/* Old boards use ATMEL AD45DB161D flash */ -+#define ATMEL_FPGA_PAGE 528 /* FPGA flash page size*/ -+#define ATMEL_SOLOS_PAGE 512 /* Solos flash page size*/ -+#define ATMEL_FPGA_BLOCK (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/ -+#define ATMEL_SOLOS_BLOCK (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/ -+/* Current boards use M25P/M25PE SPI flash */ -+#define SPI_FLASH_BLOCK (256 * 64) - - #define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2) - #define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size)) -@@ -123,11 +129,14 @@ struct solos_card { - struct sk_buff_head cli_queue[4]; - struct sk_buff *tx_skb[4]; - struct sk_buff *rx_skb[4]; -+ unsigned char *dma_bounce; - wait_queue_head_t param_wq; - wait_queue_head_t fw_wq; - int using_dma; -+ int dma_alignment; - int fpga_version; - int buffer_size; -+ int atmel_flash; - }; - - -@@ -452,7 +461,6 @@ static ssize_t console_show(struct devic - - len = skb->len; - memcpy(buf, skb->data, len); -- dev_dbg(&card->dev->dev, "len: %d\n", len); - - kfree_skb(skb); - return len; -@@ -499,6 +507,78 @@ static ssize_t console_store(struct devi - return err?:count; - } - -+struct geos_gpio_attr { -+ struct device_attribute attr; -+ int offset; -+}; -+ -+#define SOLOS_GPIO_ATTR(_name, _mode, _show, _store, _offset) \ -+ struct geos_gpio_attr gpio_attr_##_name = { \ -+ .attr = __ATTR(_name, _mode, _show, _store), \ -+ .offset = _offset } -+ -+static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); -+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr); -+ struct solos_card *card = pci_get_drvdata(pdev); -+ uint32_t data32; -+ -+ if (count != 1 && (count != 2 || buf[1] != '\n')) -+ return -EINVAL; -+ -+ spin_lock_irq(&card->param_queue_lock); -+ data32 = ioread32(card->config_regs + GPIO_STATUS); -+ if (buf[0] == '1') { -+ data32 |= 1 << gattr->offset; -+ iowrite32(data32, card->config_regs + GPIO_STATUS); -+ } else if (buf[0] == '0') { -+ data32 &= ~(1 << gattr->offset); -+ iowrite32(data32, card->config_regs + GPIO_STATUS); -+ } else { -+ count = -EINVAL; -+ } -+ spin_unlock_irq(&card->param_queue_lock); -+ return count; -+} -+ -+static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); -+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr); -+ struct solos_card *card = pci_get_drvdata(pdev); -+ uint32_t data32; -+ -+ data32 = ioread32(card->config_regs + GPIO_STATUS); -+ data32 = (data32 >> gattr->offset) & 1; -+ -+ return sprintf(buf, "%d\n", data32); -+} -+ -+static ssize_t hardware_show(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); -+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr); -+ struct solos_card *card = pci_get_drvdata(pdev); -+ uint32_t data32; -+ -+ data32 = ioread32(card->config_regs + GPIO_STATUS); -+ switch (gattr->offset) { -+ case 0: -+ /* HardwareVersion */ -+ data32 = data32 & 0x1F; -+ break; -+ case 1: -+ /* HardwareVariant */ -+ data32 = (data32 >> 5) & 0x0F; -+ break; -+ } -+ return sprintf(buf, "%d\n", data32); -+} -+ - static DEVICE_ATTR(console, 0644, console_show, console_store); - - -@@ -507,6 +587,14 @@ static DEVICE_ATTR(console, 0644, consol - - #include "solos-attrlist.c" - -+static SOLOS_GPIO_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store, 9); -+static SOLOS_GPIO_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store, 10); -+static SOLOS_GPIO_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store, 11); -+static SOLOS_GPIO_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store, 12); -+static SOLOS_GPIO_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store, 13); -+static SOLOS_GPIO_ATTR(PushButton, 0444, geos_gpio_show, NULL, 14); -+static SOLOS_GPIO_ATTR(HardwareVersion, 0444, hardware_show, NULL, 0); -+static SOLOS_GPIO_ATTR(HardwareVariant, 0444, hardware_show, NULL, 1); - #undef SOLOS_ATTR_RO - #undef SOLOS_ATTR_RW - -@@ -523,6 +611,23 @@ static struct attribute_group solos_attr - .name = "parameters", - }; - -+static struct attribute *gpio_attrs[] = { -+ &gpio_attr_GPIO1.attr.attr, -+ &gpio_attr_GPIO2.attr.attr, -+ &gpio_attr_GPIO3.attr.attr, -+ &gpio_attr_GPIO4.attr.attr, -+ &gpio_attr_GPIO5.attr.attr, -+ &gpio_attr_PushButton.attr.attr, -+ &gpio_attr_HardwareVersion.attr.attr, -+ &gpio_attr_HardwareVariant.attr.attr, -+ NULL -+}; -+ -+static struct attribute_group gpio_attr_group = { -+ .attrs = gpio_attrs, -+ .name = "gpio", -+}; -+ - static int flash_upgrade(struct solos_card *card, int chip) - { - const struct firmware *fw; -@@ -534,16 +639,25 @@ static int flash_upgrade(struct solos_ca - switch (chip) { - case 0: - fw_name = "solos-FPGA.bin"; -- blocksize = FPGA_BLOCK; -+ if (card->atmel_flash) -+ blocksize = ATMEL_FPGA_BLOCK; -+ else -+ blocksize = SPI_FLASH_BLOCK; - break; - case 1: - fw_name = "solos-Firmware.bin"; -- blocksize = SOLOS_BLOCK; -+ if (card->atmel_flash) -+ blocksize = ATMEL_SOLOS_BLOCK; -+ else -+ blocksize = SPI_FLASH_BLOCK; - break; - case 2: - if (card->fpga_version > LEGACY_BUFFERS){ - fw_name = "solos-db-FPGA.bin"; -- blocksize = FPGA_BLOCK; -+ if (card->atmel_flash) -+ blocksize = ATMEL_FPGA_BLOCK; -+ else -+ blocksize = SPI_FLASH_BLOCK; - } else { - dev_info(&card->dev->dev, "FPGA version doesn't support" - " daughter board upgrades\n"); -@@ -553,7 +667,10 @@ static int flash_upgrade(struct solos_ca - case 3: - if (card->fpga_version > LEGACY_BUFFERS){ - fw_name = "solos-Firmware.bin"; -- blocksize = SOLOS_BLOCK; -+ if (card->atmel_flash) -+ blocksize = ATMEL_SOLOS_BLOCK; -+ else -+ blocksize = SPI_FLASH_BLOCK; - } else { - dev_info(&card->dev->dev, "FPGA version doesn't support" - " daughter board upgrades\n"); -@@ -569,6 +686,9 @@ static int flash_upgrade(struct solos_ca - - dev_info(&card->dev->dev, "Flash upgrade starting\n"); - -+ /* New FPGAs require driver version before permitting flash upgrades */ -+ iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER); -+ - numblocks = fw->size / blocksize; - dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size); - dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks); -@@ -598,9 +718,13 @@ static int flash_upgrade(struct solos_ca - /* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */ - iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE); - -- /* Copy block to buffer, swapping each 16 bits */ -+ /* Copy block to buffer, swapping each 16 bits for Atmel flash */ - for(i = 0; i < blocksize; i += 4) { -- uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i)); -+ uint32_t word; -+ if (card->atmel_flash) -+ word = swahb32p((uint32_t *)(fw->data + offset + i)); -+ else -+ word = *(uint32_t *)(fw->data + offset + i); - if(card->fpga_version > LEGACY_BUFFERS) - iowrite32(word, FLASH_BUF + i); - else -@@ -945,10 +1069,11 @@ static uint32_t fpga_tx(struct solos_car - for (port = 0; tx_pending; tx_pending >>= 1, port++) { - if (tx_pending & 1) { - struct sk_buff *oldskb = card->tx_skb[port]; -- if (oldskb) -+ if (oldskb) { - pci_unmap_single(card->dev, SKB_CB(oldskb)->dma_addr, - oldskb->len, PCI_DMA_TODEVICE); -- -+ card->tx_skb[port] = NULL; -+ } - spin_lock(&card->tx_queue_lock); - skb = skb_dequeue(&card->tx_queue[port]); - if (!skb) -@@ -960,8 +1085,14 @@ static uint32_t fpga_tx(struct solos_car - tx_started |= 1 << port; - oldskb = skb; /* We're done with this skb already */ - } else if (skb && card->using_dma) { -- SKB_CB(skb)->dma_addr = pci_map_single(card->dev, skb->data, -+ unsigned char *data = skb->data; -+ if ((unsigned long)data & card->dma_alignment) { -+ data = card->dma_bounce + (BUF_SIZE * port); -+ memcpy(data, skb->data, skb->len); -+ } -+ SKB_CB(skb)->dma_addr = pci_map_single(card->dev, data, - skb->len, PCI_DMA_TODEVICE); -+ card->tx_skb[port] = skb; - iowrite32(SKB_CB(skb)->dma_addr, - card->config_regs + TX_DMA_ADDR(port)); - } -@@ -1133,17 +1264,33 @@ static int fpga_probe(struct pci_dev *de - db_fpga_upgrade = db_firmware_upgrade = 0; - } - -- if (card->fpga_version >= DMA_SUPPORTED){ -+ /* Stopped using Atmel flash after 0.03-38 */ -+ if (fpga_ver < 39) -+ card->atmel_flash = 1; -+ else -+ card->atmel_flash = 0; -+ -+ data32 = ioread32(card->config_regs + PORTS); -+ card->nr_ports = (data32 & 0x000000FF); -+ -+ if (card->fpga_version >= DMA_SUPPORTED) { -+ pci_set_master(dev); - card->using_dma = 1; -+ if (1) { /* All known FPGA versions so far */ -+ card->dma_alignment = 3; -+ card->dma_bounce = kmalloc(card->nr_ports * BUF_SIZE, GFP_KERNEL); -+ if (!card->dma_bounce) { -+ dev_warn(&card->dev->dev, "Failed to allocate DMA bounce buffers\n"); -+ /* Fallback to MMIO doesn't work */ -+ goto out_unmap_both; -+ } -+ } - } else { - card->using_dma = 0; - /* Set RX empty flag for all ports */ - iowrite32(0xF0, card->config_regs + FLAGS_ADDR); - } - -- data32 = ioread32(card->config_regs + PORTS); -- card->nr_ports = (data32 & 0x000000FF); -- - pci_set_drvdata(dev, card); - - tasklet_init(&card->tlet, solos_bh, (unsigned long)card); -@@ -1178,6 +1325,10 @@ static int fpga_probe(struct pci_dev *de - if (err) - goto out_free_irq; - -+ if (card->fpga_version >= DMA_SUPPORTED && -+ sysfs_create_group(&card->dev->dev.kobj, &gpio_attr_group)) -+ dev_err(&card->dev->dev, "Could not register parameter group for GPIOs\n"); -+ - return 0; - - out_free_irq: -@@ -1186,6 +1337,7 @@ static int fpga_probe(struct pci_dev *de - tasklet_kill(&card->tlet); - - out_unmap_both: -+ kfree(card->dma_bounce); - pci_set_drvdata(dev, NULL); - pci_iounmap(dev, card->buffers); - out_unmap_config: -@@ -1288,11 +1440,16 @@ static void fpga_remove(struct pci_dev * - iowrite32(1, card->config_regs + FPGA_MODE); - (void)ioread32(card->config_regs + FPGA_MODE); - -+ if (card->fpga_version >= DMA_SUPPORTED) -+ sysfs_remove_group(&card->dev->dev.kobj, &gpio_attr_group); -+ - atm_remove(card); - - free_irq(dev->irq, card); - tasklet_kill(&card->tlet); - -+ kfree(card->dma_bounce); -+ - /* Release device from reset */ - iowrite32(0, card->config_regs + FPGA_MODE); - (void)ioread32(card->config_regs + FPGA_MODE); diff --git a/target/linux/generic/patches-3.3/140-ixp4xx_hss_module_h_include.patch b/target/linux/generic/patches-3.3/140-ixp4xx_hss_module_h_include.patch deleted file mode 100644 index 94acf37803..0000000000 --- a/target/linux/generic/patches-3.3/140-ixp4xx_hss_module_h_include.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 32e857cd1fbb006f56a99a2eab998173b1576533 Mon Sep 17 00:00:00 2001 -From: Florian Fainelli -Date: Mon, 10 Sep 2012 10:18:57 +0200 -Subject: [PATCH net] ixp4xx_hss: fix build failure after logging conversion - -Commit c75bb2c6f0cf455c23e60f14d780e841dd47f801 (ixp4xx_hss: Update to -current logging forms) converted the ixp4xx_hss module to use the current -logging macros, but forgot to include linux/module.h, leading to the -following build failures: - - CC [M] drivers/net/wan/ixp4xx_hss.o - drivers/net/wan/ixp4xx_hss.c:1412:20: error: expected ';', ',' or ')' - before string constant - drivers/net/wan/ixp4xx_hss.c:1413:25: error: expected ';', ',' or ')' - before string constant - drivers/net/wan/ixp4xx_hss.c:1414:21: error: expected ';', ',' or ')' - before string constant - drivers/net/wan/ixp4xx_hss.c:1415:19: error: expected ';', ',' or ')' - before string constant - make[8]: *** [drivers/net/wan/ixp4xx_hss.o] Error 1 - -CC: stable@vger.kernel.org -Signed-off-by: Florian Fainelli ---- -[stable: 3.1+] - - drivers/net/wan/ixp4xx_hss.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/net/wan/ixp4xx_hss.c -+++ b/drivers/net/wan/ixp4xx_hss.c -@@ -10,6 +10,7 @@ - - #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -+#include - #include - #include - #include diff --git a/target/linux/generic/patches-3.3/200-fix_localversion.patch b/target/linux/generic/patches-3.3/200-fix_localversion.patch deleted file mode 100644 index 0d1bae8d45..0000000000 --- a/target/linux/generic/patches-3.3/200-fix_localversion.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/scripts/setlocalversion -+++ b/scripts/setlocalversion -@@ -168,7 +168,7 @@ else - # annotated or signed tagged state (as git describe only - # looks at signed or annotated tags - git tag -a/-s) and - # LOCALVERSION= is not specified -- if test "${LOCALVERSION+set}" != "set"; then -+ if test "${CONFIG_LOCALVERSION+set}" != "set"; then - scm=$(scm_version --short) - res="$res${scm:++}" - fi diff --git a/target/linux/generic/patches-3.3/201-extra_optimization.patch b/target/linux/generic/patches-3.3/201-extra_optimization.patch deleted file mode 100644 index 213e6d12a1..0000000000 --- a/target/linux/generic/patches-3.3/201-extra_optimization.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/Makefile -+++ b/Makefile -@@ -559,9 +559,9 @@ endif # $(dot-config) - all: vmlinux - - ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE --KBUILD_CFLAGS += -Os -+KBUILD_CFLAGS += -Os $(EXTRA_OPTIMIZATION) - else --KBUILD_CFLAGS += -O2 -+KBUILD_CFLAGS += -O2 -fno-reorder-blocks -fno-tree-ch $(EXTRA_OPTIMIZATION) - endif - - include $(srctree)/arch/$(SRCARCH)/Makefile diff --git a/target/linux/generic/patches-3.3/202-reduce_module_size.patch b/target/linux/generic/patches-3.3/202-reduce_module_size.patch deleted file mode 100644 index bca1e356a0..0000000000 --- a/target/linux/generic/patches-3.3/202-reduce_module_size.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/Makefile -+++ b/Makefile -@@ -374,7 +374,7 @@ KBUILD_CFLAGS_KERNEL := - KBUILD_AFLAGS := -D__ASSEMBLY__ - KBUILD_AFLAGS_MODULE := -DMODULE - KBUILD_CFLAGS_MODULE := -DMODULE --KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds -+KBUILD_LDFLAGS_MODULE = -T $(srctree)/scripts/module-common.lds $(if $(CONFIG_PROFILING),,-s) - - # Read KERNELRELEASE from include/config/kernel.release (if it exists) - KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) diff --git a/target/linux/generic/patches-3.3/210-darwin_scripts_include.patch b/target/linux/generic/patches-3.3/210-darwin_scripts_include.patch deleted file mode 100644 index ccaf142731..0000000000 --- a/target/linux/generic/patches-3.3/210-darwin_scripts_include.patch +++ /dev/null @@ -1,3088 +0,0 @@ ---- a/scripts/kallsyms.c -+++ b/scripts/kallsyms.c -@@ -22,6 +22,35 @@ - #include - #include - #include -+#ifdef __APPLE__ -+/* Darwin has no memmem implementation, this one is ripped of the uClibc-0.9.28 source */ -+void *memmem (const void *haystack, size_t haystack_len, -+ const void *needle, size_t needle_len) -+{ -+ const char *begin; -+ const char *const last_possible -+ = (const char *) haystack + haystack_len - needle_len; -+ -+ if (needle_len == 0) -+ /* The first occurrence of the empty string is deemed to occur at -+ the beginning of the string. */ -+ return (void *) haystack; -+ -+ /* Sanity check, otherwise the loop might search through the whole -+ memory. */ -+ if (__builtin_expect (haystack_len < needle_len, 0)) -+ return NULL; -+ -+ for (begin = (const char *) haystack; begin <= last_possible; ++begin) -+ if (begin[0] == ((const char *) needle)[0] && -+ !memcmp ((const void *) &begin[1], -+ (const void *) ((const char *) needle + 1), -+ needle_len - 1)) -+ return (void *) begin; -+ -+ return NULL; -+} -+#endif - - #ifndef ARRAY_SIZE - #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof(arr[0])) ---- a/scripts/kconfig/Makefile -+++ b/scripts/kconfig/Makefile -@@ -123,6 +123,9 @@ check-lxdialog := $(srctree)/$(src)/lxd - # we really need to do so. (Do not call gcc as part of make mrproper) - HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \ - -DLOCALE -+ifeq ($(shell uname -s),Darwin) -+HOST_LOADLIBES += -lncurses -+endif - - # =========================================================================== - # Shared Makefile for the various kconfig executables: ---- a/scripts/mod/mk_elfconfig.c -+++ b/scripts/mod/mk_elfconfig.c -@@ -1,7 +1,11 @@ - #include - #include - #include -+#ifndef __APPLE__ - #include -+#else -+#include "elf.h" -+#endif - - int - main(int argc, char **argv) ---- a/scripts/mod/modpost.h -+++ b/scripts/mod/modpost.h -@@ -7,7 +7,11 @@ - #include - #include - #include -+#if !(defined(__APPLE__) || defined(__CYGWIN__)) - #include -+#else -+#include "elf.h" -+#endif - - #include "elfconfig.h" - ---- /dev/null -+++ b/scripts/mod/elf.h -@@ -0,0 +1,3007 @@ -+/* This file defines standard ELF types, structures, and macros. -+ Copyright (C) 1995-2012 Free Software Foundation, Inc. -+ This file is part of the GNU C Library. -+ -+ The GNU C Library is free software; you can redistribute it and/or -+ modify it under the terms of the GNU Lesser General Public -+ License as published by the Free Software Foundation; either -+ version 2.1 of the License, or (at your option) any later version. -+ -+ The GNU C Library is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ Lesser General Public License for more details. -+ -+ You should have received a copy of the GNU Lesser General Public -+ License along with the GNU C Library; if not, see -+ . */ -+ -+#ifndef _ELF_H -+#define _ELF_H 1 -+ -+/* Standard ELF types. */ -+ -+#include -+ -+/* Type for a 16-bit quantity. */ -+typedef uint16_t Elf32_Half; -+typedef uint16_t Elf64_Half; -+ -+/* Types for signed and unsigned 32-bit quantities. */ -+typedef uint32_t Elf32_Word; -+typedef int32_t Elf32_Sword; -+typedef uint32_t Elf64_Word; -+typedef int32_t Elf64_Sword; -+ -+/* Types for signed and unsigned 64-bit quantities. */ -+typedef uint64_t Elf32_Xword; -+typedef int64_t Elf32_Sxword; -+typedef uint64_t Elf64_Xword; -+typedef int64_t Elf64_Sxword; -+ -+/* Type of addresses. */ -+typedef uint32_t Elf32_Addr; -+typedef uint64_t Elf64_Addr; -+ -+/* Type of file offsets. */ -+typedef uint32_t Elf32_Off; -+typedef uint64_t Elf64_Off; -+ -+/* Type for section indices, which are 16-bit quantities. */ -+typedef uint16_t Elf32_Section; -+typedef uint16_t Elf64_Section; -+ -+/* Type for version symbol information. */ -+typedef Elf32_Half Elf32_Versym; -+typedef Elf64_Half Elf64_Versym; -+ -+ -+/* The ELF file header. This appears at the start of every ELF file. */ -+ -+#define EI_NIDENT (16) -+ -+typedef struct -+{ -+ unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */ -+ Elf32_Half e_type; /* Object file type */ -+ Elf32_Half e_machine; /* Architecture */ -+ Elf32_Word e_version; /* Object file version */ -+ Elf32_Addr e_entry; /* Entry point virtual address */ -+ Elf32_Off e_phoff; /* Program header table file offset */ -+ Elf32_Off e_shoff; /* Section header table file offset */ -+ Elf32_Word e_flags; /* Processor-specific flags */ -+ Elf32_Half e_ehsize; /* ELF header size in bytes */ -+ Elf32_Half e_phentsize; /* Program header table entry size */ -+ Elf32_Half e_phnum; /* Program header table entry count */ -+ Elf32_Half e_shentsize; /* Section header table entry size */ -+ Elf32_Half e_shnum; /* Section header table entry count */ -+ Elf32_Half e_shstrndx; /* Section header string table index */ -+} Elf32_Ehdr; -+ -+typedef struct -+{ -+ unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */ -+ Elf64_Half e_type; /* Object file type */ -+ Elf64_Half e_machine; /* Architecture */ -+ Elf64_Word e_version; /* Object file version */ -+ Elf64_Addr e_entry; /* Entry point virtual address */ -+ Elf64_Off e_phoff; /* Program header table file offset */ -+ Elf64_Off e_shoff; /* Section header table file offset */ -+ Elf64_Word e_flags; /* Processor-specific flags */ -+ Elf64_Half e_ehsize; /* ELF header size in bytes */ -+ Elf64_Half e_phentsize; /* Program header table entry size */ -+ Elf64_Half e_phnum; /* Program header table entry count */ -+ Elf64_Half e_shentsize; /* Section header table entry size */ -+ Elf64_Half e_shnum; /* Section header table entry count */ -+ Elf64_Half e_shstrndx; /* Section header string table index */ -+} Elf64_Ehdr; -+ -+/* Fields in the e_ident array. The EI_* macros are indices into the -+ array. The macros under each EI_* macro are the values the byte -+ may have. */ -+ -+#define EI_MAG0 0 /* File identification byte 0 index */ -+#define ELFMAG0 0x7f /* Magic number byte 0 */ -+ -+#define EI_MAG1 1 /* File identification byte 1 index */ -+#define ELFMAG1 'E' /* Magic number byte 1 */ -+ -+#define EI_MAG2 2 /* File identification byte 2 index */ -+#define ELFMAG2 'L' /* Magic number byte 2 */ -+ -+#define EI_MAG3 3 /* File identification byte 3 index */ -+#define ELFMAG3 'F' /* Magic number byte 3 */ -+ -+/* Conglomeration of the identification bytes, for easy testing as a word. */ -+#define ELFMAG "\177ELF" -+#define SELFMAG 4 -+ -+#define EI_CLASS 4 /* File class byte index */ -+#define ELFCLASSNONE 0 /* Invalid class */ -+#define ELFCLASS32 1 /* 32-bit objects */ -+#define ELFCLASS64 2 /* 64-bit objects */ -+#define ELFCLASSNUM 3 -+ -+#define EI_DATA 5 /* Data encoding byte index */ -+#define ELFDATANONE 0 /* Invalid data encoding */ -+#define ELFDATA2LSB 1 /* 2's complement, little endian */ -+#define ELFDATA2MSB 2 /* 2's complement, big endian */ -+#define ELFDATANUM 3 -+ -+#define EI_VERSION 6 /* File version byte index */ -+ /* Value must be EV_CURRENT */ -+ -+#define EI_OSABI 7 /* OS ABI identification */ -+#define ELFOSABI_NONE 0 /* UNIX System V ABI */ -+#define ELFOSABI_SYSV 0 /* Alias. */ -+#define ELFOSABI_HPUX 1 /* HP-UX */ -+#define ELFOSABI_NETBSD 2 /* NetBSD. */ -+#define ELFOSABI_GNU 3 /* Object uses GNU ELF extensions. */ -+#define ELFOSABI_LINUX ELFOSABI_GNU /* Compatibility alias. */ -+#define ELFOSABI_SOLARIS 6 /* Sun Solaris. */ -+#define ELFOSABI_AIX 7 /* IBM AIX. */ -+#define ELFOSABI_IRIX 8 /* SGI Irix. */ -+#define ELFOSABI_FREEBSD 9 /* FreeBSD. */ -+#define ELFOSABI_TRU64 10 /* Compaq TRU64 UNIX. */ -+#define ELFOSABI_MODESTO 11 /* Novell Modesto. */ -+#define ELFOSABI_OPENBSD 12 /* OpenBSD. */ -+#define ELFOSABI_ARM_AEABI 64 /* ARM EABI */ -+#define ELFOSABI_ARM 97 /* ARM */ -+#define ELFOSABI_STANDALONE 255 /* Standalone (embedded) application */ -+ -+#define EI_ABIVERSION 8 /* ABI version */ -+ -+#define EI_PAD 9 /* Byte index of padding bytes */ -+ -+/* Legal values for e_type (object file type). */ -+ -+#define ET_NONE 0 /* No file type */ -+#define ET_REL 1 /* Relocatable file */ -+#define ET_EXEC 2 /* Executable file */ -+#define ET_DYN 3 /* Shared object file */ -+#define ET_CORE 4 /* Core file */ -+#define ET_NUM 5 /* Number of defined types */ -+#define ET_LOOS 0xfe00 /* OS-specific range start */ -+#define ET_HIOS 0xfeff /* OS-specific range end */ -+#define ET_LOPROC 0xff00 /* Processor-specific range start */ -+#define ET_HIPROC 0xffff /* Processor-specific range end */ -+ -+/* Legal values for e_machine (architecture). */ -+ -+#define EM_NONE 0 /* No machine */ -+#define EM_M32 1 /* AT&T WE 32100 */ -+#define EM_SPARC 2 /* SUN SPARC */ -+#define EM_386 3 /* Intel 80386 */ -+#define EM_68K 4 /* Motorola m68k family */ -+#define EM_88K 5 /* Motorola m88k family */ -+#define EM_860 7 /* Intel 80860 */ -+#define EM_MIPS 8 /* MIPS R3000 big-endian */ -+#define EM_S370 9 /* IBM System/370 */ -+#define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian */ -+ -+#define EM_PARISC 15 /* HPPA */ -+#define EM_VPP500 17 /* Fujitsu VPP500 */ -+#define EM_SPARC32PLUS 18 /* Sun's "v8plus" */ -+#define EM_960 19 /* Intel 80960 */ -+#define EM_PPC 20 /* PowerPC */ -+#define EM_PPC64 21 /* PowerPC 64-bit */ -+#define EM_S390 22 /* IBM S390 */ -+ -+#define EM_V800 36 /* NEC V800 series */ -+#define EM_FR20 37 /* Fujitsu FR20 */ -+#define EM_RH32 38 /* TRW RH-32 */ -+#define EM_RCE 39 /* Motorola RCE */ -+#define EM_ARM 40 /* ARM */ -+#define EM_FAKE_ALPHA 41 /* Digital Alpha */ -+#define EM_SH 42 /* Hitachi SH */ -+#define EM_SPARCV9 43 /* SPARC v9 64-bit */ -+#define EM_TRICORE 44 /* Siemens Tricore */ -+#define EM_ARC 45 /* Argonaut RISC Core */ -+#define EM_H8_300 46 /* Hitachi H8/300 */ -+#define EM_H8_300H 47 /* Hitachi H8/300H */ -+#define EM_H8S 48 /* Hitachi H8S */ -+#define EM_H8_500 49 /* Hitachi H8/500 */ -+#define EM_IA_64 50 /* Intel Merced */ -+#define EM_MIPS_X 51 /* Stanford MIPS-X */ -+#define EM_COLDFIRE 52 /* Motorola Coldfire */ -+#define EM_68HC12 53 /* Motorola M68HC12 */ -+#define EM_MMA 54 /* Fujitsu MMA Multimedia Accelerator*/ -+#define EM_PCP 55 /* Siemens PCP */ -+#define EM_NCPU 56 /* Sony nCPU embeeded RISC */ -+#define EM_NDR1 57 /* Denso NDR1 microprocessor */ -+#define EM_STARCORE 58 /* Motorola Start*Core processor */ -+#define EM_ME16 59 /* Toyota ME16 processor */ -+#define EM_ST100 60 /* STMicroelectronic ST100 processor */ -+#define EM_TINYJ 61 /* Advanced Logic Corp. Tinyj emb.fam*/ -+#define EM_X86_64 62 /* AMD x86-64 architecture */ -+#define EM_PDSP 63 /* Sony DSP Processor */ -+ -+#define EM_FX66 66 /* Siemens FX66 microcontroller */ -+#define EM_ST9PLUS 67 /* STMicroelectronics ST9+ 8/16 mc */ -+#define EM_ST7 68 /* STmicroelectronics ST7 8 bit mc */ -+#define EM_68HC16 69 /* Motorola MC68HC16 microcontroller */ -+#define EM_68HC11 70 /* Motorola MC68HC11 microcontroller */ -+#define EM_68HC08 71 /* Motorola MC68HC08 microcontroller */ -+#define EM_68HC05 72 /* Motorola MC68HC05 microcontroller */ -+#define EM_SVX 73 /* Silicon Graphics SVx */ -+#define EM_ST19 74 /* STMicroelectronics ST19 8 bit mc */ -+#define EM_VAX 75 /* Digital VAX */ -+#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */ -+#define EM_JAVELIN 77 /* Infineon Technologies 32-bit embedded processor */ -+#define EM_FIREPATH 78 /* Element 14 64-bit DSP Processor */ -+#define EM_ZSP 79 /* LSI Logic 16-bit DSP Processor */ -+#define EM_MMIX 80 /* Donald Knuth's educational 64-bit processor */ -+#define EM_HUANY 81 /* Harvard University machine-independent object files */ -+#define EM_PRISM 82 /* SiTera Prism */ -+#define EM_AVR 83 /* Atmel AVR 8-bit microcontroller */ -+#define EM_FR30 84 /* Fujitsu FR30 */ -+#define EM_D10V 85 /* Mitsubishi D10V */ -+#define EM_D30V 86 /* Mitsubishi D30V */ -+#define EM_V850 87 /* NEC v850 */ -+#define EM_M32R 88 /* Mitsubishi M32R */ -+#define EM_MN10300 89 /* Matsushita MN10300 */ -+#define EM_MN10200 90 /* Matsushita MN10200 */ -+#define EM_PJ 91 /* picoJava */ -+#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */ -+#define EM_ARC_A5 93 /* ARC Cores Tangent-A5 */ -+#define EM_XTENSA 94 /* Tensilica Xtensa Architecture */ -+#define EM_TILEPRO 188 /* Tilera TILEPro */ -+#define EM_TILEGX 191 /* Tilera TILE-Gx */ -+#define EM_NUM 192 -+ -+/* If it is necessary to assign new unofficial EM_* values, please -+ pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the -+ chances of collision with official or non-GNU unofficial values. */ -+ -+#define EM_ALPHA 0x9026 -+ -+/* Legal values for e_version (version). */ -+ -+#define EV_NONE 0 /* Invalid ELF version */ -+#define EV_CURRENT 1 /* Current version */ -+#define EV_NUM 2 -+ -+/* Section header. */ -+ -+typedef struct -+{ -+ Elf32_Word sh_name; /* Section name (string tbl index) */ -+ Elf32_Word sh_type; /* Section type */ -+ Elf32_Word sh_flags; /* Section flags */ -+ Elf32_Addr sh_addr; /* Section virtual addr at execution */ -+ Elf32_Off sh_offset; /* Section file offset */ -+ Elf32_Word sh_size; /* Section size in bytes */ -+ Elf32_Word sh_link; /* Link to another section */ -+ Elf32_Word sh_info; /* Additional section information */ -+ Elf32_Word sh_addralign; /* Section alignment */ -+ Elf32_Word sh_entsize; /* Entry size if section holds table */ -+} Elf32_Shdr; -+ -+typedef struct -+{ -+ Elf64_Word sh_name; /* Section name (string tbl index) */ -+ Elf64_Word sh_type; /* Section type */ -+ Elf64_Xword sh_flags; /* Section flags */ -+ Elf64_Addr sh_addr; /* Section virtual addr at execution */ -+ Elf64_Off sh_offset; /* Section file offset */ -+ Elf64_Xword sh_size; /* Section size in bytes */ -+ Elf64_Word sh_link; /* Link to another section */ -+ Elf64_Word sh_info; /* Additional section information */ -+ Elf64_Xword sh_addralign; /* Section alignment */ -+ Elf64_Xword sh_entsize; /* Entry size if section holds table */ -+} Elf64_Shdr; -+ -+/* Special section indices. */ -+ -+#define SHN_UNDEF 0 /* Undefined section */ -+#define SHN_LORESERVE 0xff00 /* Start of reserved indices */ -+#define SHN_LOPROC 0xff00 /* Start of processor-specific */ -+#define SHN_BEFORE 0xff00 /* Order section before all others -+ (Solaris). */ -+#define SHN_AFTER 0xff01 /* Order section after all others -+ (Solaris). */ -+#define SHN_HIPROC 0xff1f /* End of processor-specific */ -+#define SHN_LOOS 0xff20 /* Start of OS-specific */ -+#define SHN_HIOS 0xff3f /* End of OS-specific */ -+#define SHN_ABS 0xfff1 /* Associated symbol is absolute */ -+#define SHN_COMMON 0xfff2 /* Associated symbol is common */ -+#define SHN_XINDEX 0xffff /* Index is in extra table. */ -+#define SHN_HIRESERVE 0xffff /* End of reserved indices */ -+ -+/* Legal values for sh_type (section type). */ -+ -+#define SHT_NULL 0 /* Section header table entry unused */ -+#define SHT_PROGBITS 1 /* Program data */ -+#define SHT_SYMTAB 2 /* Symbol table */ -+#define SHT_STRTAB 3 /* String table */ -+#define SHT_RELA 4 /* Relocation entries with addends */ -+#define SHT_HASH 5 /* Symbol hash table */ -+#define SHT_DYNAMIC 6 /* Dynamic linking information */ -+#define SHT_NOTE 7 /* Notes */ -+#define SHT_NOBITS 8 /* Program space with no data (bss) */ -+#define SHT_REL 9 /* Relocation entries, no addends */ -+#define SHT_SHLIB 10 /* Reserved */ -+#define SHT_DYNSYM 11 /* Dynamic linker symbol table */ -+#define SHT_INIT_ARRAY 14 /* Array of constructors */ -+#define SHT_FINI_ARRAY 15 /* Array of destructors */ -+#define SHT_PREINIT_ARRAY 16 /* Array of pre-constructors */ -+#define SHT_GROUP 17 /* Section group */ -+#define SHT_SYMTAB_SHNDX 18 /* Extended section indeces */ -+#define SHT_NUM 19 /* Number of defined types. */ -+#define SHT_LOOS 0x60000000 /* Start OS-specific. */ -+#define SHT_GNU_ATTRIBUTES 0x6ffffff5 /* Object attributes. */ -+#define SHT_GNU_HASH 0x6ffffff6 /* GNU-style hash table. */ -+#define SHT_GNU_LIBLIST 0x6ffffff7 /* Prelink library list */ -+#define SHT_CHECKSUM 0x6ffffff8 /* Checksum for DSO content. */ -+#define SHT_LOSUNW 0x6ffffffa /* Sun-specific low bound. */ -+#define SHT_SUNW_move 0x6ffffffa -+#define SHT_SUNW_COMDAT 0x6ffffffb -+#define SHT_SUNW_syminfo 0x6ffffffc -+#define SHT_GNU_verdef 0x6ffffffd /* Version definition section. */ -+#define SHT_GNU_verneed 0x6ffffffe /* Version needs section. */ -+#define SHT_GNU_versym 0x6fffffff /* Version symbol table. */ -+#define SHT_HISUNW 0x6fffffff /* Sun-specific high bound. */ -+#define SHT_HIOS 0x6fffffff /* End OS-specific type */ -+#define SHT_LOPROC 0x70000000 /* Start of processor-specific */ -+#define SHT_HIPROC 0x7fffffff /* End of processor-specific */ -+#define SHT_LOUSER 0x80000000 /* Start of application-specific */ -+#define SHT_HIUSER 0x8fffffff /* End of application-specific */ -+ -+/* Legal values for sh_flags (section flags). */ -+ -+#define SHF_WRITE (1 << 0) /* Writable */ -+#define SHF_ALLOC (1 << 1) /* Occupies memory during execution */ -+#define SHF_EXECINSTR (1 << 2) /* Executable */ -+#define SHF_MERGE (1 << 4) /* Might be merged */ -+#define SHF_STRINGS (1 << 5) /* Contains nul-terminated strings */ -+#define SHF_INFO_LINK (1 << 6) /* `sh_info' contains SHT index */ -+#define SHF_LINK_ORDER (1 << 7) /* Preserve order after combining */ -+#define SHF_OS_NONCONFORMING (1 << 8) /* Non-standard OS specific handling -+ required */ -+#define SHF_GROUP (1 << 9) /* Section is member of a group. */ -+#define SHF_TLS (1 << 10) /* Section hold thread-local data. */ -+#define SHF_MASKOS 0x0ff00000 /* OS-specific. */ -+#define SHF_MASKPROC 0xf0000000 /* Processor-specific */ -+#define SHF_ORDERED (1 << 30) /* Special ordering requirement -+ (Solaris). */ -+#define SHF_EXCLUDE (1 << 31) /* Section is excluded unless -+ referenced or allocated (Solaris).*/ -+ -+/* Section group handling. */ -+#define GRP_COMDAT 0x1 /* Mark group as COMDAT. */ -+ -+/* Symbol table entry. */ -+ -+typedef struct -+{ -+ Elf32_Word st_name; /* Symbol name (string tbl index) */ -+ Elf32_Addr st_value; /* Symbol value */ -+ Elf32_Word st_size; /* Symbol size */ -+ unsigned char st_info; /* Symbol type and binding */ -+ unsigned char st_other; /* Symbol visibility */ -+ Elf32_Section st_shndx; /* Section index */ -+} Elf32_Sym; -+ -+typedef struct -+{ -+ Elf64_Word st_name; /* Symbol name (string tbl index) */ -+ unsigned char st_info; /* Symbol type and binding */ -+ unsigned char st_other; /* Symbol visibility */ -+ Elf64_Section st_shndx; /* Section index */ -+ Elf64_Addr st_value; /* Symbol value */ -+ Elf64_Xword st_size; /* Symbol size */ -+} Elf64_Sym; -+ -+/* The syminfo section if available contains additional information about -+ every dynamic symbol. */ -+ -+typedef struct -+{ -+ Elf32_Half si_boundto; /* Direct bindings, symbol bound to */ -+ Elf32_Half si_flags; /* Per symbol flags */ -+} Elf32_Syminfo; -+ -+typedef struct -+{ -+ Elf64_Half si_boundto; /* Direct bindings, symbol bound to */ -+ Elf64_Half si_flags; /* Per symbol flags */ -+} Elf64_Syminfo; -+ -+/* Possible values for si_boundto. */ -+#define SYMINFO_BT_SELF 0xffff /* Symbol bound to self */ -+#define SYMINFO_BT_PARENT 0xfffe /* Symbol bound to parent */ -+#define SYMINFO_BT_LOWRESERVE 0xff00 /* Beginning of reserved entries */ -+ -+/* Possible bitmasks for si_flags. */ -+#define SYMINFO_FLG_DIRECT 0x0001 /* Direct bound symbol */ -+#define SYMINFO_FLG_PASSTHRU 0x0002 /* Pass-thru symbol for translator */ -+#define SYMINFO_FLG_COPY 0x0004 /* Symbol is a copy-reloc */ -+#define SYMINFO_FLG_LAZYLOAD 0x0008 /* Symbol bound to object to be lazy -+ loaded */ -+/* Syminfo version values. */ -+#define SYMINFO_NONE 0 -+#define SYMINFO_CURRENT 1 -+#define SYMINFO_NUM 2 -+ -+ -+/* How to extract and insert information held in the st_info field. */ -+ -+#define ELF32_ST_BIND(val) (((unsigned char) (val)) >> 4) -+#define ELF32_ST_TYPE(val) ((val) & 0xf) -+#define ELF32_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf)) -+ -+/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field. */ -+#define ELF64_ST_BIND(val) ELF32_ST_BIND (val) -+#define ELF64_ST_TYPE(val) ELF32_ST_TYPE (val) -+#define ELF64_ST_INFO(bind, type) ELF32_ST_INFO ((bind), (type)) -+ -+/* Legal values for ST_BIND subfield of st_info (symbol binding). */ -+ -+#define STB_LOCAL 0 /* Local symbol */ -+#define STB_GLOBAL 1 /* Global symbol */ -+#define STB_WEAK 2 /* Weak symbol */ -+#define STB_NUM 3 /* Number of defined types. */ -+#define STB_LOOS 10 /* Start of OS-specific */ -+#define STB_GNU_UNIQUE 10 /* Unique symbol. */ -+#define STB_HIOS 12 /* End of OS-specific */ -+#define STB_LOPROC 13 /* Start of processor-specific */ -+#define STB_HIPROC 15 /* End of processor-specific */ -+ -+/* Legal values for ST_TYPE subfield of st_info (symbol type). */ -+ -+#define STT_NOTYPE 0 /* Symbol type is unspecified */ -+#define STT_OBJECT 1 /* Symbol is a data object */ -+#define STT_FUNC 2 /* Symbol is a code object */ -+#define STT_SECTION 3 /* Symbol associated with a section */ -+#define STT_FILE 4 /* Symbol's name is file name */ -+#define STT_COMMON 5 /* Symbol is a common data object */ -+#define STT_TLS 6 /* Symbol is thread-local data object*/ -+#define STT_NUM 7 /* Number of defined types. */ -+#define STT_LOOS 10 /* Start of OS-specific */ -+#define STT_GNU_IFUNC 10 /* Symbol is indirect code object */ -+#define STT_HIOS 12 /* End of OS-specific */ -+#define STT_LOPROC 13 /* Start of processor-specific */ -+#define STT_HIPROC 15 /* End of processor-specific */ -+ -+ -+/* Symbol table indices are found in the hash buckets and chain table -+ of a symbol hash table section. This special index value indicates -+ the end of a chain, meaning no further symbols are found in that bucket. */ -+ -+#define STN_UNDEF 0 /* End of a chain. */ -+ -+ -+/* How to extract and insert information held in the st_other field. */ -+ -+#define ELF32_ST_VISIBILITY(o) ((o) & 0x03) -+ -+/* For ELF64 the definitions are the same. */ -+#define ELF64_ST_VISIBILITY(o) ELF32_ST_VISIBILITY (o) -+ -+/* Symbol visibility specification encoded in the st_other field. */ -+#define STV_DEFAULT 0 /* Default symbol visibility rules */ -+#define STV_INTERNAL 1 /* Processor specific hidden class */ -+#define STV_HIDDEN 2 /* Sym unavailable in other modules */ -+#define STV_PROTECTED 3 /* Not preemptible, not exported */ -+ -+ -+/* Relocation table entry without addend (in section of type SHT_REL). */ -+ -+typedef struct -+{ -+ Elf32_Addr r_offset; /* Address */ -+ Elf32_Word r_info; /* Relocation type and symbol index */ -+} Elf32_Rel; -+ -+/* I have seen two different definitions of the Elf64_Rel and -+ Elf64_Rela structures, so we'll leave them out until Novell (or -+ whoever) gets their act together. */ -+/* The following, at least, is used on Sparc v9, MIPS, and Alpha. */ -+ -+typedef struct -+{ -+ Elf64_Addr r_offset; /* Address */ -+ Elf64_Xword r_info; /* Relocation type and symbol index */ -+} Elf64_Rel; -+ -+/* Relocation table entry with addend (in section of type SHT_RELA). */ -+ -+typedef struct -+{ -+ Elf32_Addr r_offset; /* Address */ -+ Elf32_Word r_info; /* Relocation type and symbol index */ -+ Elf32_Sword r_addend; /* Addend */ -+} Elf32_Rela; -+ -+typedef struct -+{ -+ Elf64_Addr r_offset; /* Address */ -+ Elf64_Xword r_info; /* Relocation type and symbol index */ -+ Elf64_Sxword r_addend; /* Addend */ -+} Elf64_Rela; -+ -+/* How to extract and insert information held in the r_info field. */ -+ -+#define ELF32_R_SYM(val) ((val) >> 8) -+#define ELF32_R_TYPE(val) ((val) & 0xff) -+#define ELF32_R_INFO(sym, type) (((sym) << 8) + ((type) & 0xff)) -+ -+#define ELF64_R_SYM(i) ((i) >> 32) -+#define ELF64_R_TYPE(i) ((i) & 0xffffffff) -+#define ELF64_R_INFO(sym,type) ((((Elf64_Xword) (sym)) << 32) + (type)) -+ -+/* Program segment header. */ -+ -+typedef struct -+{ -+ Elf32_Word p_type; /* Segment type */ -+ Elf32_Off p_offset; /* Segment file offset */ -+ Elf32_Addr p_vaddr; /* Segment virtual address */ -+ Elf32_Addr p_paddr; /* Segment physical address */ -+ Elf32_Word p_filesz; /* Segment size in file */ -+ Elf32_Word p_memsz; /* Segment size in memory */ -+ Elf32_Word p_flags; /* Segment flags */ -+ Elf32_Word p_align; /* Segment alignment */ -+} Elf32_Phdr; -+ -+typedef struct -+{ -+ Elf64_Word p_type; /* Segment type */ -+ Elf64_Word p_flags; /* Segment flags */ -+ Elf64_Off p_offset; /* Segment file offset */ -+ Elf64_Addr p_vaddr; /* Segment virtual address */ -+ Elf64_Addr p_paddr; /* Segment physical address */ -+ Elf64_Xword p_filesz; /* Segment size in file */ -+ Elf64_Xword p_memsz; /* Segment size in memory */ -+ Elf64_Xword p_align; /* Segment alignment */ -+} Elf64_Phdr; -+ -+/* Special value for e_phnum. This indicates that the real number of -+ program headers is too large to fit into e_phnum. Instead the real -+ value is in the field sh_info of section 0. */ -+ -+#define PN_XNUM 0xffff -+ -+/* Legal values for p_type (segment type). */ -+ -+#define PT_NULL 0 /* Program header table entry unused */ -+#define PT_LOAD 1 /* Loadable program segment */ -+#define PT_DYNAMIC 2 /* Dynamic linking information */ -+#define PT_INTERP 3 /* Program interpreter */ -+#define PT_NOTE 4 /* Auxiliary information */ -+#define PT_SHLIB 5 /* Reserved */ -+#define PT_PHDR 6 /* Entry for header table itself */ -+#define PT_TLS 7 /* Thread-local storage segment */ -+#define PT_NUM 8 /* Number of defined types */ -+#define PT_LOOS 0x60000000 /* Start of OS-specific */ -+#define PT_GNU_EH_FRAME 0x6474e550 /* GCC .eh_frame_hdr segment */ -+#define PT_GNU_STACK 0x6474e551 /* Indicates stack executability */ -+#define PT_GNU_RELRO 0x6474e552 /* Read-only after relocation */ -+#define PT_LOSUNW 0x6ffffffa -+#define PT_SUNWBSS 0x6ffffffa /* Sun Specific segment */ -+#define PT_SUNWSTACK 0x6ffffffb /* Stack segment */ -+#define PT_HISUNW 0x6fffffff -+#define PT_HIOS 0x6fffffff /* End of OS-specific */ -+#define PT_LOPROC 0x70000000 /* Start of processor-specific */ -+#define PT_HIPROC 0x7fffffff /* End of processor-specific */ -+ -+/* Legal values for p_flags (segment flags). */ -+ -+#define PF_X (1 << 0) /* Segment is executable */ -+#define PF_W (1 << 1) /* Segment is writable */ -+#define PF_R (1 << 2) /* Segment is readable */ -+#define PF_MASKOS 0x0ff00000 /* OS-specific */ -+#define PF_MASKPROC 0xf0000000 /* Processor-specific */ -+ -+/* Legal values for note segment descriptor types for core files. */ -+ -+#define NT_PRSTATUS 1 /* Contains copy of prstatus struct */ -+#define NT_FPREGSET 2 /* Contains copy of fpregset struct */ -+#define NT_PRPSINFO 3 /* Contains copy of prpsinfo struct */ -+#define NT_PRXREG 4 /* Contains copy of prxregset struct */ -+#define NT_TASKSTRUCT 4 /* Contains copy of task structure */ -+#define NT_PLATFORM 5 /* String from sysinfo(SI_PLATFORM) */ -+#define NT_AUXV 6 /* Contains copy of auxv array */ -+#define NT_GWINDOWS 7 /* Contains copy of gwindows struct */ -+#define NT_ASRS 8 /* Contains copy of asrset struct */ -+#define NT_PSTATUS 10 /* Contains copy of pstatus struct */ -+#define NT_PSINFO 13 /* Contains copy of psinfo struct */ -+#define NT_PRCRED 14 /* Contains copy of prcred struct */ -+#define NT_UTSNAME 15 /* Contains copy of utsname struct */ -+#define NT_LWPSTATUS 16 /* Contains copy of lwpstatus struct */ -+#define NT_LWPSINFO 17 /* Contains copy of lwpinfo struct */ -+#define NT_PRFPXREG 20 /* Contains copy of fprxregset struct */ -+#define NT_PRXFPREG 0x46e62b7f /* Contains copy of user_fxsr_struct */ -+#define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */ -+#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */ -+#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */ -+#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */ -+#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */ -+#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */ -+ -+/* Legal values for the note segment descriptor types for object files. */ -+ -+#define NT_VERSION 1 /* Contains a version string. */ -+ -+ -+/* Dynamic section entry. */ -+ -+typedef struct -+{ -+ Elf32_Sword d_tag; /* Dynamic entry type */ -+ union -+ { -+ Elf32_Word d_val; /* Integer value */ -+ Elf32_Addr d_ptr; /* Address value */ -+ } d_un; -+} Elf32_Dyn; -+ -+typedef struct -+{ -+ Elf64_Sxword d_tag; /* Dynamic entry type */ -+ union -+ { -+ Elf64_Xword d_val; /* Integer value */ -+ Elf64_Addr d_ptr; /* Address value */ -+ } d_un; -+} Elf64_Dyn; -+ -+/* Legal values for d_tag (dynamic entry type). */ -+ -+#define DT_NULL 0 /* Marks end of dynamic section */ -+#define DT_NEEDED 1 /* Name of needed library */ -+#define DT_PLTRELSZ 2 /* Size in bytes of PLT relocs */ -+#define DT_PLTGOT 3 /* Processor defined value */ -+#define DT_HASH 4 /* Address of symbol hash table */ -+#define DT_STRTAB 5 /* Address of string table */ -+#define DT_SYMTAB 6 /* Address of symbol table */ -+#define DT_RELA 7 /* Address of Rela relocs */ -+#define DT_RELASZ 8 /* Total size of Rela relocs */ -+#define DT_RELAENT 9 /* Size of one Rela reloc */ -+#define DT_STRSZ 10 /* Size of string table */ -+#define DT_SYMENT 11 /* Size of one symbol table entry */ -+#define DT_INIT 12 /* Address of init function */ -+#define DT_FINI 13 /* Address of termination function */ -+#define DT_SONAME 14 /* Name of shared object */ -+#define DT_RPATH 15 /* Library search path (deprecated) */ -+#define DT_SYMBOLIC 16 /* Start symbol search here */ -+#define DT_REL 17 /* Address of Rel relocs */ -+#define DT_RELSZ 18 /* Total size of Rel relocs */ -+#define DT_RELENT 19 /* Size of one Rel reloc */ -+#define DT_PLTREL 20 /* Type of reloc in PLT */ -+#define DT_DEBUG 21 /* For debugging; unspecified */ -+#define DT_TEXTREL 22 /* Reloc might modify .text */ -+#define DT_JMPREL 23 /* Address of PLT relocs */ -+#define DT_BIND_NOW 24 /* Process relocations of object */ -+#define DT_INIT_ARRAY 25 /* Array with addresses of init fct */ -+#define DT_FINI_ARRAY 26 /* Array with addresses of fini fct */ -+#define DT_INIT_ARRAYSZ 27 /* Size in bytes of DT_INIT_ARRAY */ -+#define DT_FINI_ARRAYSZ 28 /* Size in bytes of DT_FINI_ARRAY */ -+#define DT_RUNPATH 29 /* Library search path */ -+#define DT_FLAGS 30 /* Flags for the object being loaded */ -+#define DT_ENCODING 32 /* Start of encoded range */ -+#define DT_PREINIT_ARRAY 32 /* Array with addresses of preinit fct*/ -+#define DT_PREINIT_ARRAYSZ 33 /* size in bytes of DT_PREINIT_ARRAY */ -+#define DT_NUM 34 /* Number used */ -+#define DT_LOOS 0x6000000d /* Start of OS-specific */ -+#define DT_HIOS 0x6ffff000 /* End of OS-specific */ -+#define DT_LOPROC 0x70000000 /* Start of processor-specific */ -+#define DT_HIPROC 0x7fffffff /* End of processor-specific */ -+#define DT_PROCNUM DT_MIPS_NUM /* Most used by any processor */ -+ -+/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the -+ Dyn.d_un.d_val field of the Elf*_Dyn structure. This follows Sun's -+ approach. */ -+#define DT_VALRNGLO 0x6ffffd00 -+#define DT_GNU_PRELINKED 0x6ffffdf5 /* Prelinking timestamp */ -+#define DT_GNU_CONFLICTSZ 0x6ffffdf6 /* Size of conflict section */ -+#define DT_GNU_LIBLISTSZ 0x6ffffdf7 /* Size of library list */ -+#define DT_CHECKSUM 0x6ffffdf8 -+#define DT_PLTPADSZ 0x6ffffdf9 -+#define DT_MOVEENT 0x6ffffdfa -+#define DT_MOVESZ 0x6ffffdfb -+#define DT_FEATURE_1 0x6ffffdfc /* Feature selection (DTF_*). */ -+#define DT_POSFLAG_1 0x6ffffdfd /* Flags for DT_* entries, effecting -+ the following DT_* entry. */ -+#define DT_SYMINSZ 0x6ffffdfe /* Size of syminfo table (in bytes) */ -+#define DT_SYMINENT 0x6ffffdff /* Entry size of syminfo */ -+#define DT_VALRNGHI 0x6ffffdff -+#define DT_VALTAGIDX(tag) (DT_VALRNGHI - (tag)) /* Reverse order! */ -+#define DT_VALNUM 12 -+ -+/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the -+ Dyn.d_un.d_ptr field of the Elf*_Dyn structure. -+ -+ If any adjustment is made to the ELF object after it has been -+ built these entries will need to be adjusted. */ -+#define DT_ADDRRNGLO 0x6ffffe00 -+#define DT_GNU_HASH 0x6ffffef5 /* GNU-style hash table. */ -+#define DT_TLSDESC_PLT 0x6ffffef6 -+#define DT_TLSDESC_GOT 0x6ffffef7 -+#define DT_GNU_CONFLICT 0x6ffffef8 /* Start of conflict section */ -+#define DT_GNU_LIBLIST 0x6ffffef9 /* Library list */ -+#define DT_CONFIG 0x6ffffefa /* Configuration information. */ -+#define DT_DEPAUDIT 0x6ffffefb /* Dependency auditing. */ -+#define DT_AUDIT 0x6ffffefc /* Object auditing. */ -+#define DT_PLTPAD 0x6ffffefd /* PLT padding. */ -+#define DT_MOVETAB 0x6ffffefe /* Move table. */ -+#define DT_SYMINFO 0x6ffffeff /* Syminfo table. */ -+#define DT_ADDRRNGHI 0x6ffffeff -+#define DT_ADDRTAGIDX(tag) (DT_ADDRRNGHI - (tag)) /* Reverse order! */ -+#define DT_ADDRNUM 11 -+ -+/* The versioning entry types. The next are defined as part of the -+ GNU extension. */ -+#define DT_VERSYM 0x6ffffff0 -+ -+#define DT_RELACOUNT 0x6ffffff9 -+#define DT_RELCOUNT 0x6ffffffa -+ -+/* These were chosen by Sun. */ -+#define DT_FLAGS_1 0x6ffffffb /* State flags, see DF_1_* below. */ -+#define DT_VERDEF 0x6ffffffc /* Address of version definition -+ table */ -+#define DT_VERDEFNUM 0x6ffffffd /* Number of version definitions */ -+#define DT_VERNEED 0x6ffffffe /* Address of table with needed -+ versions */ -+#define DT_VERNEEDNUM 0x6fffffff /* Number of needed versions */ -+#define DT_VERSIONTAGIDX(tag) (DT_VERNEEDNUM - (tag)) /* Reverse order! */ -+#define DT_VERSIONTAGNUM 16 -+ -+/* Sun added these machine-independent extensions in the "processor-specific" -+ range. Be compatible. */ -+#define DT_AUXILIARY 0x7ffffffd /* Shared object to load before self */ -+#define DT_FILTER 0x7fffffff /* Shared object to get values from */ -+#define DT_EXTRATAGIDX(tag) ((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1) -+#define DT_EXTRANUM 3 -+ -+/* Values of `d_un.d_val' in the DT_FLAGS entry. */ -+#define DF_ORIGIN 0x00000001 /* Object may use DF_ORIGIN */ -+#define DF_SYMBOLIC 0x00000002 /* Symbol resolutions starts here */ -+#define DF_TEXTREL 0x00000004 /* Object contains text relocations */ -+#define DF_BIND_NOW 0x00000008 /* No lazy binding for this object */ -+#define DF_STATIC_TLS 0x00000010 /* Module uses the static TLS model */ -+ -+/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1 -+ entry in the dynamic section. */ -+#define DF_1_NOW 0x00000001 /* Set RTLD_NOW for this object. */ -+#define DF_1_GLOBAL 0x00000002 /* Set RTLD_GLOBAL for this object. */ -+#define DF_1_GROUP 0x00000004 /* Set RTLD_GROUP for this object. */ -+#define DF_1_NODELETE 0x00000008 /* Set RTLD_NODELETE for this object.*/ -+#define DF_1_LOADFLTR 0x00000010 /* Trigger filtee loading at runtime.*/ -+#define DF_1_INITFIRST 0x00000020 /* Set RTLD_INITFIRST for this object*/ -+#define DF_1_NOOPEN 0x00000040 /* Set RTLD_NOOPEN for this object. */ -+#define DF_1_ORIGIN 0x00000080 /* $ORIGIN must be handled. */ -+#define DF_1_DIRECT 0x00000100 /* Direct binding enabled. */ -+#define DF_1_TRANS 0x00000200 -+#define DF_1_INTERPOSE 0x00000400 /* Object is used to interpose. */ -+#define DF_1_NODEFLIB 0x00000800 /* Ignore default lib search path. */ -+#define DF_1_NODUMP 0x00001000 /* Object can't be dldump'ed. */ -+#define DF_1_CONFALT 0x00002000 /* Configuration alternative created.*/ -+#define DF_1_ENDFILTEE 0x00004000 /* Filtee terminates filters search. */ -+#define DF_1_DISPRELDNE 0x00008000 /* Disp reloc applied at build time. */ -+#define DF_1_DISPRELPND 0x00010000 /* Disp reloc applied at run-time. */ -+ -+/* Flags for the feature selection in DT_FEATURE_1. */ -+#define DTF_1_PARINIT 0x00000001 -+#define DTF_1_CONFEXP 0x00000002 -+ -+/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry. */ -+#define DF_P1_LAZYLOAD 0x00000001 /* Lazyload following object. */ -+#define DF_P1_GROUPPERM 0x00000002 /* Symbols from next object are not -+ generally available. */ -+ -+/* Version definition sections. */ -+ -+typedef struct -+{ -+ Elf32_Half vd_version; /* Version revision */ -+ Elf32_Half vd_flags; /* Version information */ -+ Elf32_Half vd_ndx; /* Version Index */ -+ Elf32_Half vd_cnt; /* Number of associated aux entries */ -+ Elf32_Word vd_hash; /* Version name hash value */ -+ Elf32_Word vd_aux; /* Offset in bytes to verdaux array */ -+ Elf32_Word vd_next; /* Offset in bytes to next verdef -+ entry */ -+} Elf32_Verdef; -+ -+typedef struct -+{ -+ Elf64_Half vd_version; /* Version revision */ -+ Elf64_Half vd_flags; /* Version information */ -+ Elf64_Half vd_ndx; /* Version Index */ -+ Elf64_Half vd_cnt; /* Number of associated aux entries */ -+ Elf64_Word vd_hash; /* Version name hash value */ -+ Elf64_Word vd_aux; /* Offset in bytes to verdaux array */ -+ Elf64_Word vd_next; /* Offset in bytes to next verdef -+ entry */ -+} Elf64_Verdef; -+ -+ -+/* Legal values for vd_version (version revision). */ -+#define VER_DEF_NONE 0 /* No version */ -+#define VER_DEF_CURRENT 1 /* Current version */ -+#define VER_DEF_NUM 2 /* Given version number */ -+ -+/* Legal values for vd_flags (version information flags). */ -+#define VER_FLG_BASE 0x1 /* Version definition of file itself */ -+#define VER_FLG_WEAK 0x2 /* Weak version identifier */ -+ -+/* Versym symbol index values. */ -+#define VER_NDX_LOCAL 0 /* Symbol is local. */ -+#define VER_NDX_GLOBAL 1 /* Symbol is global. */ -+#define VER_NDX_LORESERVE 0xff00 /* Beginning of reserved entries. */ -+#define VER_NDX_ELIMINATE 0xff01 /* Symbol is to be eliminated. */ -+ -+/* Auxialiary version information. */ -+ -+typedef struct -+{ -+ Elf32_Word vda_name; /* Version or dependency names */ -+ Elf32_Word vda_next; /* Offset in bytes to next verdaux -+ entry */ -+} Elf32_Verdaux; -+ -+typedef struct -+{ -+ Elf64_Word vda_name; /* Version or dependency names */ -+ Elf64_Word vda_next; /* Offset in bytes to next verdaux -+ entry */ -+} Elf64_Verdaux; -+ -+ -+/* Version dependency section. */ -+ -+typedef struct -+{ -+ Elf32_Half vn_version; /* Version of structure */ -+ Elf32_Half vn_cnt; /* Number of associated aux entries */ -+ Elf32_Word vn_file; /* Offset of filename for this -+ dependency */ -+ Elf32_Word vn_aux; /* Offset in bytes to vernaux array */ -+ Elf32_Word vn_next; /* Offset in bytes to next verneed -+ entry */ -+} Elf32_Verneed; -+ -+typedef struct -+{ -+ Elf64_Half vn_version; /* Version of structure */ -+ Elf64_Half vn_cnt; /* Number of associated aux entries */ -+ Elf64_Word vn_file; /* Offset of filename for this -+ dependency */ -+ Elf64_Word vn_aux; /* Offset in bytes to vernaux array */ -+ Elf64_Word vn_next; /* Offset in bytes to next verneed -+ entry */ -+} Elf64_Verneed; -+ -+ -+/* Legal values for vn_version (version revision). */ -+#define VER_NEED_NONE 0 /* No version */ -+#define VER_NEED_CURRENT 1 /* Current version */ -+#define VER_NEED_NUM 2 /* Given version number */ -+ -+/* Auxiliary needed version information. */ -+ -+typedef struct -+{ -+ Elf32_Word vna_hash; /* Hash value of dependency name */ -+ Elf32_Half vna_flags; /* Dependency specific information */ -+ Elf32_Half vna_other; /* Unused */ -+ Elf32_Word vna_name; /* Dependency name string offset */ -+ Elf32_Word vna_next; /* Offset in bytes to next vernaux -+ entry */ -+} Elf32_Vernaux; -+ -+typedef struct -+{ -+ Elf64_Word vna_hash; /* Hash value of dependency name */ -+ Elf64_Half vna_flags; /* Dependency specific information */ -+ Elf64_Half vna_other; /* Unused */ -+ Elf64_Word vna_name; /* Dependency name string offset */ -+ Elf64_Word vna_next; /* Offset in bytes to next vernaux -+ entry */ -+} Elf64_Vernaux; -+ -+ -+/* Legal values for vna_flags. */ -+#define VER_FLG_WEAK 0x2 /* Weak version identifier */ -+ -+ -+/* Auxiliary vector. */ -+ -+/* This vector is normally only used by the program interpreter. The -+ usual definition in an ABI supplement uses the name auxv_t. The -+ vector is not usually defined in a standard file, but it -+ can't hurt. We rename it to avoid conflicts. The sizes of these -+ types are an arrangement between the exec server and the program -+ interpreter, so we don't fully specify them here. */ -+ -+typedef struct -+{ -+ uint32_t a_type; /* Entry type */ -+ union -+ { -+ uint32_t a_val; /* Integer value */ -+ /* We use to have pointer elements added here. We cannot do that, -+ though, since it does not work when using 32-bit definitions -+ on 64-bit platforms and vice versa. */ -+ } a_un; -+} Elf32_auxv_t; -+ -+typedef struct -+{ -+ uint64_t a_type; /* Entry type */ -+ union -+ { -+ uint64_t a_val; /* Integer value */ -+ /* We use to have pointer elements added here. We cannot do that, -+ though, since it does not work when using 32-bit definitions -+ on 64-bit platforms and vice versa. */ -+ } a_un; -+} Elf64_auxv_t; -+ -+/* Legal values for a_type (entry type). */ -+ -+#define AT_NULL 0 /* End of vector */ -+#define AT_IGNORE 1 /* Entry should be ignored */ -+#define AT_EXECFD 2 /* File descriptor of program */ -+#define AT_PHDR 3 /* Program headers for program */ -+#define AT_PHENT 4 /* Size of program header entry */ -+#define AT_PHNUM 5 /* Number of program headers */ -+#define AT_PAGESZ 6 /* System page size */ -+#define AT_BASE 7 /* Base address of interpreter */ -+#define AT_FLAGS 8 /* Flags */ -+#define AT_ENTRY 9 /* Entry point of program */ -+#define AT_NOTELF 10 /* Program is not ELF */ -+#define AT_UID 11 /* Real uid */ -+#define AT_EUID 12 /* Effective uid */ -+#define AT_GID 13 /* Real gid */ -+#define AT_EGID 14 /* Effective gid */ -+#define AT_CLKTCK 17 /* Frequency of times() */ -+ -+/* Some more special a_type values describing the hardware. */ -+#define AT_PLATFORM 15 /* String identifying platform. */ -+#define AT_HWCAP 16 /* Machine dependent hints about -+ processor capabilities. */ -+ -+/* This entry gives some information about the FPU initialization -+ performed by the kernel. */ -+#define AT_FPUCW 18 /* Used FPU control word. */ -+ -+/* Cache block sizes. */ -+#define AT_DCACHEBSIZE 19 /* Data cache block size. */ -+#define AT_ICACHEBSIZE 20 /* Instruction cache block size. */ -+#define AT_UCACHEBSIZE 21 /* Unified cache block size. */ -+ -+/* A special ignored value for PPC, used by the kernel to control the -+ interpretation of the AUXV. Must be > 16. */ -+#define AT_IGNOREPPC 22 /* Entry should be ignored. */ -+ -+#define AT_SECURE 23 /* Boolean, was exec setuid-like? */ -+ -+#define AT_BASE_PLATFORM 24 /* String identifying real platforms.*/ -+ -+#define AT_RANDOM 25 /* Address of 16 random bytes. */ -+ -+#define AT_EXECFN 31 /* Filename of executable. */ -+ -+/* Pointer to the global system page used for system calls and other -+ nice things. */ -+#define AT_SYSINFO 32 -+#define AT_SYSINFO_EHDR 33 -+ -+/* Shapes of the caches. Bits 0-3 contains associativity; bits 4-7 contains -+ log2 of line size; mask those to get cache size. */ -+#define AT_L1I_CACHESHAPE 34 -+#define AT_L1D_CACHESHAPE 35 -+#define AT_L2_CACHESHAPE 36 -+#define AT_L3_CACHESHAPE 37 -+ -+/* Note section contents. Each entry in the note section begins with -+ a header of a fixed form. */ -+ -+typedef struct -+{ -+ Elf32_Word n_namesz; /* Length of the note's name. */ -+ Elf32_Word n_descsz; /* Length of the note's descriptor. */ -+ Elf32_Word n_type; /* Type of the note. */ -+} Elf32_Nhdr; -+ -+typedef struct -+{ -+ Elf64_Word n_namesz; /* Length of the note's name. */ -+ Elf64_Word n_descsz; /* Length of the note's descriptor. */ -+ Elf64_Word n_type; /* Type of the note. */ -+} Elf64_Nhdr; -+ -+/* Known names of notes. */ -+ -+/* Solaris entries in the note section have this name. */ -+#define ELF_NOTE_SOLARIS "SUNW Solaris" -+ -+/* Note entries for GNU systems have this name. */ -+#define ELF_NOTE_GNU "GNU" -+ -+ -+/* Defined types of notes for Solaris. */ -+ -+/* Value of descriptor (one word) is desired pagesize for the binary. */ -+#define ELF_NOTE_PAGESIZE_HINT 1 -+ -+ -+/* Defined note types for GNU systems. */ -+ -+/* ABI information. The descriptor consists of words: -+ word 0: OS descriptor -+ word 1: major version of the ABI -+ word 2: minor version of the ABI -+ word 3: subminor version of the ABI -+*/ -+#define NT_GNU_ABI_TAG 1 -+#define ELF_NOTE_ABI NT_GNU_ABI_TAG /* Old name. */ -+ -+/* Known OSes. These values can appear in word 0 of an -+ NT_GNU_ABI_TAG note section entry. */ -+#define ELF_NOTE_OS_LINUX 0 -+#define ELF_NOTE_OS_GNU 1 -+#define ELF_NOTE_OS_SOLARIS2 2 -+#define ELF_NOTE_OS_FREEBSD 3 -+ -+/* Synthetic hwcap information. The descriptor begins with two words: -+ word 0: number of entries -+ word 1: bitmask of enabled entries -+ Then follow variable-length entries, one byte followed by a -+ '\0'-terminated hwcap name string. The byte gives the bit -+ number to test if enabled, (1U << bit) & bitmask. */ -+#define NT_GNU_HWCAP 2 -+ -+/* Build ID bits as generated by ld --build-id. -+ The descriptor consists of any nonzero number of bytes. */ -+#define NT_GNU_BUILD_ID 3 -+ -+/* Version note generated by GNU gold containing a version string. */ -+#define NT_GNU_GOLD_VERSION 4 -+ -+ -+/* Move records. */ -+typedef struct -+{ -+ Elf32_Xword m_value; /* Symbol value. */ -+ Elf32_Word m_info; /* Size and index. */ -+ Elf32_Word m_poffset; /* Symbol offset. */ -+ Elf32_Half m_repeat; /* Repeat count. */ -+ Elf32_Half m_stride; /* Stride info. */ -+} Elf32_Move; -+ -+typedef struct -+{ -+ Elf64_Xword m_value; /* Symbol value. */ -+ Elf64_Xword m_info; /* Size and index. */ -+ Elf64_Xword m_poffset; /* Symbol offset. */ -+ Elf64_Half m_repeat; /* Repeat count. */ -+ Elf64_Half m_stride; /* Stride info. */ -+} Elf64_Move; -+ -+/* Macro to construct move records. */ -+#define ELF32_M_SYM(info) ((info) >> 8) -+#define ELF32_M_SIZE(info) ((unsigned char) (info)) -+#define ELF32_M_INFO(sym, size) (((sym) << 8) + (unsigned char) (size)) -+ -+#define ELF64_M_SYM(info) ELF32_M_SYM (info) -+#define ELF64_M_SIZE(info) ELF32_M_SIZE (info) -+#define ELF64_M_INFO(sym, size) ELF32_M_INFO (sym, size) -+ -+ -+/* Motorola 68k specific definitions. */ -+ -+/* Values for Elf32_Ehdr.e_flags. */ -+#define EF_CPU32 0x00810000 -+ -+/* m68k relocs. */ -+ -+#define R_68K_NONE 0 /* No reloc */ -+#define R_68K_32 1 /* Direct 32 bit */ -+#define R_68K_16 2 /* Direct 16 bit */ -+#define R_68K_8 3 /* Direct 8 bit */ -+#define R_68K_PC32 4 /* PC relative 32 bit */ -+#define R_68K_PC16 5 /* PC relative 16 bit */ -+#define R_68K_PC8 6 /* PC relative 8 bit */ -+#define R_68K_GOT32 7 /* 32 bit PC relative GOT entry */ -+#define R_68K_GOT16 8 /* 16 bit PC relative GOT entry */ -+#define R_68K_GOT8 9 /* 8 bit PC relative GOT entry */ -+#define R_68K_GOT32O 10 /* 32 bit GOT offset */ -+#define R_68K_GOT16O 11 /* 16 bit GOT offset */ -+#define R_68K_GOT8O 12 /* 8 bit GOT offset */ -+#define R_68K_PLT32 13 /* 32 bit PC relative PLT address */ -+#define R_68K_PLT16 14 /* 16 bit PC relative PLT address */ -+#define R_68K_PLT8 15 /* 8 bit PC relative PLT address */ -+#define R_68K_PLT32O 16 /* 32 bit PLT offset */ -+#define R_68K_PLT16O 17 /* 16 bit PLT offset */ -+#define R_68K_PLT8O 18 /* 8 bit PLT offset */ -+#define R_68K_COPY 19 /* Copy symbol at runtime */ -+#define R_68K_GLOB_DAT 20 /* Create GOT entry */ -+#define R_68K_JMP_SLOT 21 /* Create PLT entry */ -+#define R_68K_RELATIVE 22 /* Adjust by program base */ -+#define R_68K_TLS_GD32 25 /* 32 bit GOT offset for GD */ -+#define R_68K_TLS_GD16 26 /* 16 bit GOT offset for GD */ -+#define R_68K_TLS_GD8 27 /* 8 bit GOT offset for GD */ -+#define R_68K_TLS_LDM32 28 /* 32 bit GOT offset for LDM */ -+#define R_68K_TLS_LDM16 29 /* 16 bit GOT offset for LDM */ -+#define R_68K_TLS_LDM8 30 /* 8 bit GOT offset for LDM */ -+#define R_68K_TLS_LDO32 31 /* 32 bit module-relative offset */ -+#define R_68K_TLS_LDO16 32 /* 16 bit module-relative offset */ -+#define R_68K_TLS_LDO8 33 /* 8 bit module-relative offset */ -+#define R_68K_TLS_IE32 34 /* 32 bit GOT offset for IE */ -+#define R_68K_TLS_IE16 35 /* 16 bit GOT offset for IE */ -+#define R_68K_TLS_IE8 36 /* 8 bit GOT offset for IE */ -+#define R_68K_TLS_LE32 37 /* 32 bit offset relative to -+ static TLS block */ -+#define R_68K_TLS_LE16 38 /* 16 bit offset relative to -+ static TLS block */ -+#define R_68K_TLS_LE8 39 /* 8 bit offset relative to -+ static TLS block */ -+#define R_68K_TLS_DTPMOD32 40 /* 32 bit module number */ -+#define R_68K_TLS_DTPREL32 41 /* 32 bit module-relative offset */ -+#define R_68K_TLS_TPREL32 42 /* 32 bit TP-relative offset */ -+/* Keep this the last entry. */ -+#define R_68K_NUM 43 -+ -+/* Intel 80386 specific definitions. */ -+ -+/* i386 relocs. */ -+ -+#define R_386_NONE 0 /* No reloc */ -+#define R_386_32 1 /* Direct 32 bit */ -+#define R_386_PC32 2 /* PC relative 32 bit */ -+#define R_386_GOT32 3 /* 32 bit GOT entry */ -+#define R_386_PLT32 4 /* 32 bit PLT address */ -+#define R_386_COPY 5 /* Copy symbol at runtime */ -+#define R_386_GLOB_DAT 6 /* Create GOT entry */ -+#define R_386_JMP_SLOT 7 /* Create PLT entry */ -+#define R_386_RELATIVE 8 /* Adjust by program base */ -+#define R_386_GOTOFF 9 /* 32 bit offset to GOT */ -+#define R_386_GOTPC 10 /* 32 bit PC relative offset to GOT */ -+#define R_386_32PLT 11 -+#define R_386_TLS_TPOFF 14 /* Offset in static TLS block */ -+#define R_386_TLS_IE 15 /* Address of GOT entry for static TLS -+ block offset */ -+#define R_386_TLS_GOTIE 16 /* GOT entry for static TLS block -+ offset */ -+#define R_386_TLS_LE 17 /* Offset relative to static TLS -+ block */ -+#define R_386_TLS_GD 18 /* Direct 32 bit for GNU version of -+ general dynamic thread local data */ -+#define R_386_TLS_LDM 19 /* Direct 32 bit for GNU version of -+ local dynamic thread local data -+ in LE code */ -+#define R_386_16 20 -+#define R_386_PC16 21 -+#define R_386_8 22 -+#define R_386_PC8 23 -+#define R_386_TLS_GD_32 24 /* Direct 32 bit for general dynamic -+ thread local data */ -+#define R_386_TLS_GD_PUSH 25 /* Tag for pushl in GD TLS code */ -+#define R_386_TLS_GD_CALL 26 /* Relocation for call to -+ __tls_get_addr() */ -+#define R_386_TLS_GD_POP 27 /* Tag for popl in GD TLS code */ -+#define R_386_TLS_LDM_32 28 /* Direct 32 bit for local dynamic -+ thread local data in LE code */ -+#define R_386_TLS_LDM_PUSH 29 /* Tag for pushl in LDM TLS code */ -+#define R_386_TLS_LDM_CALL 30 /* Relocation for call to -+ __tls_get_addr() in LDM code */ -+#define R_386_TLS_LDM_POP 31 /* Tag for popl in LDM TLS code */ -+#define R_386_TLS_LDO_32 32 /* Offset relative to TLS block */ -+#define R_386_TLS_IE_32 33 /* GOT entry for negated static TLS -+ block offset */ -+#define R_386_TLS_LE_32 34 /* Negated offset relative to static -+ TLS block */ -+#define R_386_TLS_DTPMOD32 35 /* ID of module containing symbol */ -+#define R_386_TLS_DTPOFF32 36 /* Offset in TLS block */ -+#define R_386_TLS_TPOFF32 37 /* Negated offset in static TLS block */ -+/* 38? */ -+#define R_386_TLS_GOTDESC 39 /* GOT offset for TLS descriptor. */ -+#define R_386_TLS_DESC_CALL 40 /* Marker of call through TLS -+ descriptor for -+ relaxation. */ -+#define R_386_TLS_DESC 41 /* TLS descriptor containing -+ pointer to code and to -+ argument, returning the TLS -+ offset for the symbol. */ -+#define R_386_IRELATIVE 42 /* Adjust indirectly by program base */ -+/* Keep this the last entry. */ -+#define R_386_NUM 43 -+ -+/* SUN SPARC specific definitions. */ -+ -+/* Legal values for ST_TYPE subfield of st_info (symbol type). */ -+ -+#define STT_SPARC_REGISTER 13 /* Global register reserved to app. */ -+ -+/* Values for Elf64_Ehdr.e_flags. */ -+ -+#define EF_SPARCV9_MM 3 -+#define EF_SPARCV9_TSO 0 -+#define EF_SPARCV9_PSO 1 -+#define EF_SPARCV9_RMO 2 -+#define EF_SPARC_LEDATA 0x800000 /* little endian data */ -+#define EF_SPARC_EXT_MASK 0xFFFF00 -+#define EF_SPARC_32PLUS 0x000100 /* generic V8+ features */ -+#define EF_SPARC_SUN_US1 0x000200 /* Sun UltraSPARC1 extensions */ -+#define EF_SPARC_HAL_R1 0x000400 /* HAL R1 extensions */ -+#define EF_SPARC_SUN_US3 0x000800 /* Sun UltraSPARCIII extensions */ -+ -+/* SPARC relocs. */ -+ -+#define R_SPARC_NONE 0 /* No reloc */ -+#define R_SPARC_8 1 /* Direct 8 bit */ -+#define R_SPARC_16 2 /* Direct 16 bit */ -+#define R_SPARC_32 3 /* Direct 32 bit */ -+#define R_SPARC_DISP8 4 /* PC relative 8 bit */ -+#define R_SPARC_DISP16 5 /* PC relative 16 bit */ -+#define R_SPARC_DISP32 6 /* PC relative 32 bit */ -+#define R_SPARC_WDISP30 7 /* PC relative 30 bit shifted */ -+#define R_SPARC_WDISP22 8 /* PC relative 22 bit shifted */ -+#define R_SPARC_HI22 9 /* High 22 bit */ -+#define R_SPARC_22 10 /* Direct 22 bit */ -+#define R_SPARC_13 11 /* Direct 13 bit */ -+#define R_SPARC_LO10 12 /* Truncated 10 bit */ -+#define R_SPARC_GOT10 13 /* Truncated 10 bit GOT entry */ -+#define R_SPARC_GOT13 14 /* 13 bit GOT entry */ -+#define R_SPARC_GOT22 15 /* 22 bit GOT entry shifted */ -+#define R_SPARC_PC10 16 /* PC relative 10 bit truncated */ -+#define R_SPARC_PC22 17 /* PC relative 22 bit shifted */ -+#define R_SPARC_WPLT30 18 /* 30 bit PC relative PLT address */ -+#define R_SPARC_COPY 19 /* Copy symbol at runtime */ -+#define R_SPARC_GLOB_DAT 20 /* Create GOT entry */ -+#define R_SPARC_JMP_SLOT 21 /* Create PLT entry */ -+#define R_SPARC_RELATIVE 22 /* Adjust by program base */ -+#define R_SPARC_UA32 23 /* Direct 32 bit unaligned */ -+ -+/* Additional Sparc64 relocs. */ -+ -+#define R_SPARC_PLT32 24 /* Direct 32 bit ref to PLT entry */ -+#define R_SPARC_HIPLT22 25 /* High 22 bit PLT entry */ -+#define R_SPARC_LOPLT10 26 /* Truncated 10 bit PLT entry */ -+#define R_SPARC_PCPLT32 27 /* PC rel 32 bit ref to PLT entry */ -+#define R_SPARC_PCPLT22 28 /* PC rel high 22 bit PLT entry */ -+#define R_SPARC_PCPLT10 29 /* PC rel trunc 10 bit PLT entry */ -+#define R_SPARC_10 30 /* Direct 10 bit */ -+#define R_SPARC_11 31 /* Direct 11 bit */ -+#define R_SPARC_64 32 /* Direct 64 bit */ -+#define R_SPARC_OLO10 33 /* 10bit with secondary 13bit addend */ -+#define R_SPARC_HH22 34 /* Top 22 bits of direct 64 bit */ -+#define R_SPARC_HM10 35 /* High middle 10 bits of ... */ -+#define R_SPARC_LM22 36 /* Low middle 22 bits of ... */ -+#define R_SPARC_PC_HH22 37 /* Top 22 bits of pc rel 64 bit */ -+#define R_SPARC_PC_HM10 38 /* High middle 10 bit of ... */ -+#define R_SPARC_PC_LM22 39 /* Low miggle 22 bits of ... */ -+#define R_SPARC_WDISP16 40 /* PC relative 16 bit shifted */ -+#define R_SPARC_WDISP19 41 /* PC relative 19 bit shifted */ -+#define R_SPARC_GLOB_JMP 42 /* was part of v9 ABI but was removed */ -+#define R_SPARC_7 43 /* Direct 7 bit */ -+#define R_SPARC_5 44 /* Direct 5 bit */ -+#define R_SPARC_6 45 /* Direct 6 bit */ -+#define R_SPARC_DISP64 46 /* PC relative 64 bit */ -+#define R_SPARC_PLT64 47 /* Direct 64 bit ref to PLT entry */ -+#define R_SPARC_HIX22 48 /* High 22 bit complemented */ -+#define R_SPARC_LOX10 49 /* Truncated 11 bit complemented */ -+#define R_SPARC_H44 50 /* Direct high 12 of 44 bit */ -+#define R_SPARC_M44 51 /* Direct mid 22 of 44 bit */ -+#define R_SPARC_L44 52 /* Direct low 10 of 44 bit */ -+#define R_SPARC_REGISTER 53 /* Global register usage */ -+#define R_SPARC_UA64 54 /* Direct 64 bit unaligned */ -+#define R_SPARC_UA16 55 /* Direct 16 bit unaligned */ -+#define R_SPARC_TLS_GD_HI22 56 -+#define R_SPARC_TLS_GD_LO10 57 -+#define R_SPARC_TLS_GD_ADD 58 -+#define R_SPARC_TLS_GD_CALL 59 -+#define R_SPARC_TLS_LDM_HI22 60 -+#define R_SPARC_TLS_LDM_LO10 61 -+#define R_SPARC_TLS_LDM_ADD 62 -+#define R_SPARC_TLS_LDM_CALL 63 -+#define R_SPARC_TLS_LDO_HIX22 64 -+#define R_SPARC_TLS_LDO_LOX10 65 -+#define R_SPARC_TLS_LDO_ADD 66 -+#define R_SPARC_TLS_IE_HI22 67 -+#define R_SPARC_TLS_IE_LO10 68 -+#define R_SPARC_TLS_IE_LD 69 -+#define R_SPARC_TLS_IE_LDX 70 -+#define R_SPARC_TLS_IE_ADD 71 -+#define R_SPARC_TLS_LE_HIX22 72 -+#define R_SPARC_TLS_LE_LOX10 73 -+#define R_SPARC_TLS_DTPMOD32 74 -+#define R_SPARC_TLS_DTPMOD64 75 -+#define R_SPARC_TLS_DTPOFF32 76 -+#define R_SPARC_TLS_DTPOFF64 77 -+#define R_SPARC_TLS_TPOFF32 78 -+#define R_SPARC_TLS_TPOFF64 79 -+#define R_SPARC_GOTDATA_HIX22 80 -+#define R_SPARC_GOTDATA_LOX10 81 -+#define R_SPARC_GOTDATA_OP_HIX22 82 -+#define R_SPARC_GOTDATA_OP_LOX10 83 -+#define R_SPARC_GOTDATA_OP 84 -+#define R_SPARC_H34 85 -+#define R_SPARC_SIZE32 86 -+#define R_SPARC_SIZE64 87 -+#define R_SPARC_WDISP10 88 -+#define R_SPARC_JMP_IREL 248 -+#define R_SPARC_IRELATIVE 249 -+#define R_SPARC_GNU_VTINHERIT 250 -+#define R_SPARC_GNU_VTENTRY 251 -+#define R_SPARC_REV32 252 -+/* Keep this the last entry. */ -+#define R_SPARC_NUM 253 -+ -+/* For Sparc64, legal values for d_tag of Elf64_Dyn. */ -+ -+#define DT_SPARC_REGISTER 0x70000001 -+#define DT_SPARC_NUM 2 -+ -+/* MIPS R3000 specific definitions. */ -+ -+/* Legal values for e_flags field of Elf32_Ehdr. */ -+ -+#define EF_MIPS_NOREORDER 1 /* A .noreorder directive was used */ -+#define EF_MIPS_PIC 2 /* Contains PIC code */ -+#define EF_MIPS_CPIC 4 /* Uses PIC calling sequence */ -+#define EF_MIPS_XGOT 8 -+#define EF_MIPS_64BIT_WHIRL 16 -+#define EF_MIPS_ABI2 32 -+#define EF_MIPS_ABI_ON32 64 -+#define EF_MIPS_ARCH 0xf0000000 /* MIPS architecture level */ -+ -+/* Legal values for MIPS architecture level. */ -+ -+#define EF_MIPS_ARCH_1 0x00000000 /* -mips1 code. */ -+#define EF_MIPS_ARCH_2 0x10000000 /* -mips2 code. */ -+#define EF_MIPS_ARCH_3 0x20000000 /* -mips3 code. */ -+#define EF_MIPS_ARCH_4 0x30000000 /* -mips4 code. */ -+#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */ -+#define EF_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */ -+#define EF_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */ -+ -+/* The following are non-official names and should not be used. */ -+ -+#define E_MIPS_ARCH_1 0x00000000 /* -mips1 code. */ -+#define E_MIPS_ARCH_2 0x10000000 /* -mips2 code. */ -+#define E_MIPS_ARCH_3 0x20000000 /* -mips3 code. */ -+#define E_MIPS_ARCH_4 0x30000000 /* -mips4 code. */ -+#define E_MIPS_ARCH_5 0x40000000 /* -mips5 code. */ -+#define E_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */ -+#define E_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */ -+ -+/* Special section indices. */ -+ -+#define SHN_MIPS_ACOMMON 0xff00 /* Allocated common symbols */ -+#define SHN_MIPS_TEXT 0xff01 /* Allocated test symbols. */ -+#define SHN_MIPS_DATA 0xff02 /* Allocated data symbols. */ -+#define SHN_MIPS_SCOMMON 0xff03 /* Small common symbols */ -+#define SHN_MIPS_SUNDEFINED 0xff04 /* Small undefined symbols */ -+ -+/* Legal values for sh_type field of Elf32_Shdr. */ -+ -+#define SHT_MIPS_LIBLIST 0x70000000 /* Shared objects used in link */ -+#define SHT_MIPS_MSYM 0x70000001 -+#define SHT_MIPS_CONFLICT 0x70000002 /* Conflicting symbols */ -+#define SHT_MIPS_GPTAB 0x70000003 /* Global data area sizes */ -+#define SHT_MIPS_UCODE 0x70000004 /* Reserved for SGI/MIPS compilers */ -+#define SHT_MIPS_DEBUG 0x70000005 /* MIPS ECOFF debugging information*/ -+#define SHT_MIPS_REGINFO 0x70000006 /* Register usage information */ -+#define SHT_MIPS_PACKAGE 0x70000007 -+#define SHT_MIPS_PACKSYM 0x70000008 -+#define SHT_MIPS_RELD 0x70000009 -+#define SHT_MIPS_IFACE 0x7000000b -+#define SHT_MIPS_CONTENT 0x7000000c -+#define SHT_MIPS_OPTIONS 0x7000000d /* Miscellaneous options. */ -+#define SHT_MIPS_SHDR 0x70000010 -+#define SHT_MIPS_FDESC 0x70000011 -+#define SHT_MIPS_EXTSYM 0x70000012 -+#define SHT_MIPS_DENSE 0x70000013 -+#define SHT_MIPS_PDESC 0x70000014 -+#define SHT_MIPS_LOCSYM 0x70000015 -+#define SHT_MIPS_AUXSYM 0x70000016 -+#define SHT_MIPS_OPTSYM 0x70000017 -+#define SHT_MIPS_LOCSTR 0x70000018 -+#define SHT_MIPS_LINE 0x70000019 -+#define SHT_MIPS_RFDESC 0x7000001a -+#define SHT_MIPS_DELTASYM 0x7000001b -+#define SHT_MIPS_DELTAINST 0x7000001c -+#define SHT_MIPS_DELTACLASS 0x7000001d -+#define SHT_MIPS_DWARF 0x7000001e /* DWARF debugging information. */ -+#define SHT_MIPS_DELTADECL 0x7000001f -+#define SHT_MIPS_SYMBOL_LIB 0x70000020 -+#define SHT_MIPS_EVENTS 0x70000021 /* Event section. */ -+#define SHT_MIPS_TRANSLATE 0x70000022 -+#define SHT_MIPS_PIXIE 0x70000023 -+#define SHT_MIPS_XLATE 0x70000024 -+#define SHT_MIPS_XLATE_DEBUG 0x70000025 -+#define SHT_MIPS_WHIRL 0x70000026 -+#define SHT_MIPS_EH_REGION 0x70000027 -+#define SHT_MIPS_XLATE_OLD 0x70000028 -+#define SHT_MIPS_PDR_EXCEPTION 0x70000029 -+ -+/* Legal values for sh_flags field of Elf32_Shdr. */ -+ -+#define SHF_MIPS_GPREL 0x10000000 /* Must be part of global data area */ -+#define SHF_MIPS_MERGE 0x20000000 -+#define SHF_MIPS_ADDR 0x40000000 -+#define SHF_MIPS_STRINGS 0x80000000 -+#define SHF_MIPS_NOSTRIP 0x08000000 -+#define SHF_MIPS_LOCAL 0x04000000 -+#define SHF_MIPS_NAMES 0x02000000 -+#define SHF_MIPS_NODUPE 0x01000000 -+ -+ -+/* Symbol tables. */ -+ -+/* MIPS specific values for `st_other'. */ -+#define STO_MIPS_DEFAULT 0x0 -+#define STO_MIPS_INTERNAL 0x1 -+#define STO_MIPS_HIDDEN 0x2 -+#define STO_MIPS_PROTECTED 0x3 -+#define STO_MIPS_PLT 0x8 -+#define STO_MIPS_SC_ALIGN_UNUSED 0xff -+ -+/* MIPS specific values for `st_info'. */ -+#define STB_MIPS_SPLIT_COMMON 13 -+ -+/* Entries found in sections of type SHT_MIPS_GPTAB. */ -+ -+typedef union -+{ -+ struct -+ { -+ Elf32_Word gt_current_g_value; /* -G value used for compilation */ -+ Elf32_Word gt_unused; /* Not used */ -+ } gt_header; /* First entry in section */ -+ struct -+ { -+ Elf32_Word gt_g_value; /* If this value were used for -G */ -+ Elf32_Word gt_bytes; /* This many bytes would be used */ -+ } gt_entry; /* Subsequent entries in section */ -+} Elf32_gptab; -+ -+/* Entry found in sections of type SHT_MIPS_REGINFO. */ -+ -+typedef struct -+{ -+ Elf32_Word ri_gprmask; /* General registers used */ -+ Elf32_Word ri_cprmask[4]; /* Coprocessor registers used */ -+ Elf32_Sword ri_gp_value; /* $gp register value */ -+} Elf32_RegInfo; -+ -+/* Entries found in sections of type SHT_MIPS_OPTIONS. */ -+ -+typedef struct -+{ -+ unsigned char kind; /* Determines interpretation of the -+ variable part of descriptor. */ -+ unsigned char size; /* Size of descriptor, including header. */ -+ Elf32_Section section; /* Section header index of section affected, -+ 0 for global options. */ -+ Elf32_Word info; /* Kind-specific information. */ -+} Elf_Options; -+ -+/* Values for `kind' field in Elf_Options. */ -+ -+#define ODK_NULL 0 /* Undefined. */ -+#define ODK_REGINFO 1 /* Register usage information. */ -+#define ODK_EXCEPTIONS 2 /* Exception processing options. */ -+#define ODK_PAD 3 /* Section padding options. */ -+#define ODK_HWPATCH 4 /* Hardware workarounds performed */ -+#define ODK_FILL 5 /* record the fill value used by the linker. */ -+#define ODK_TAGS 6 /* reserve space for desktop tools to write. */ -+#define ODK_HWAND 7 /* HW workarounds. 'AND' bits when merging. */ -+#define ODK_HWOR 8 /* HW workarounds. 'OR' bits when merging. */ -+ -+/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries. */ -+ -+#define OEX_FPU_MIN 0x1f /* FPE's which MUST be enabled. */ -+#define OEX_FPU_MAX 0x1f00 /* FPE's which MAY be enabled. */ -+#define OEX_PAGE0 0x10000 /* page zero must be mapped. */ -+#define OEX_SMM 0x20000 /* Force sequential memory mode? */ -+#define OEX_FPDBUG 0x40000 /* Force floating point debug mode? */ -+#define OEX_PRECISEFP OEX_FPDBUG -+#define OEX_DISMISS 0x80000 /* Dismiss invalid address faults? */ -+ -+#define OEX_FPU_INVAL 0x10 -+#define OEX_FPU_DIV0 0x08 -+#define OEX_FPU_OFLO 0x04 -+#define OEX_FPU_UFLO 0x02 -+#define OEX_FPU_INEX 0x01 -+ -+/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry. */ -+ -+#define OHW_R4KEOP 0x1 /* R4000 end-of-page patch. */ -+#define OHW_R8KPFETCH 0x2 /* may need R8000 prefetch patch. */ -+#define OHW_R5KEOP 0x4 /* R5000 end-of-page patch. */ -+#define OHW_R5KCVTL 0x8 /* R5000 cvt.[ds].l bug. clean=1. */ -+ -+#define OPAD_PREFIX 0x1 -+#define OPAD_POSTFIX 0x2 -+#define OPAD_SYMBOL 0x4 -+ -+/* Entry found in `.options' section. */ -+ -+typedef struct -+{ -+ Elf32_Word hwp_flags1; /* Extra flags. */ -+ Elf32_Word hwp_flags2; /* Extra flags. */ -+} Elf_Options_Hw; -+ -+/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries. */ -+ -+#define OHWA0_R4KEOP_CHECKED 0x00000001 -+#define OHWA1_R4KEOP_CLEAN 0x00000002 -+ -+/* MIPS relocs. */ -+ -+#define R_MIPS_NONE 0 /* No reloc */ -+#define R_MIPS_16 1 /* Direct 16 bit */ -+#define R_MIPS_32 2 /* Direct 32 bit */ -+#define R_MIPS_REL32 3 /* PC relative 32 bit */ -+#define R_MIPS_26 4 /* Direct 26 bit shifted */ -+#define R_MIPS_HI16 5 /* High 16 bit */ -+#define R_MIPS_LO16 6 /* Low 16 bit */ -+#define R_MIPS_GPREL16 7 /* GP relative 16 bit */ -+#define R_MIPS_LITERAL 8 /* 16 bit literal entry */ -+#define R_MIPS_GOT16 9 /* 16 bit GOT entry */ -+#define R_MIPS_PC16 10 /* PC relative 16 bit */ -+#define R_MIPS_CALL16 11 /* 16 bit GOT entry for function */ -+#define R_MIPS_GPREL32 12 /* GP relative 32 bit */ -+ -+#define R_MIPS_SHIFT5 16 -+#define R_MIPS_SHIFT6 17 -+#define R_MIPS_64 18 -+#define R_MIPS_GOT_DISP 19 -+#define R_MIPS_GOT_PAGE 20 -+#define R_MIPS_GOT_OFST 21 -+#define R_MIPS_GOT_HI16 22 -+#define R_MIPS_GOT_LO16 23 -+#define R_MIPS_SUB 24 -+#define R_MIPS_INSERT_A 25 -+#define R_MIPS_INSERT_B 26 -+#define R_MIPS_DELETE 27 -+#define R_MIPS_HIGHER 28 -+#define R_MIPS_HIGHEST 29 -+#define R_MIPS_CALL_HI16 30 -+#define R_MIPS_CALL_LO16 31 -+#define R_MIPS_SCN_DISP 32 -+#define R_MIPS_REL16 33 -+#define R_MIPS_ADD_IMMEDIATE 34 -+#define R_MIPS_PJUMP 35 -+#define R_MIPS_RELGOT 36 -+#define R_MIPS_JALR 37 -+#define R_MIPS_TLS_DTPMOD32 38 /* Module number 32 bit */ -+#define R_MIPS_TLS_DTPREL32 39 /* Module-relative offset 32 bit */ -+#define R_MIPS_TLS_DTPMOD64 40 /* Module number 64 bit */ -+#define R_MIPS_TLS_DTPREL64 41 /* Module-relative offset 64 bit */ -+#define R_MIPS_TLS_GD 42 /* 16 bit GOT offset for GD */ -+#define R_MIPS_TLS_LDM 43 /* 16 bit GOT offset for LDM */ -+#define R_MIPS_TLS_DTPREL_HI16 44 /* Module-relative offset, high 16 bits */ -+#define R_MIPS_TLS_DTPREL_LO16 45 /* Module-relative offset, low 16 bits */ -+#define R_MIPS_TLS_GOTTPREL 46 /* 16 bit GOT offset for IE */ -+#define R_MIPS_TLS_TPREL32 47 /* TP-relative offset, 32 bit */ -+#define R_MIPS_TLS_TPREL64 48 /* TP-relative offset, 64 bit */ -+#define R_MIPS_TLS_TPREL_HI16 49 /* TP-relative offset, high 16 bits */ -+#define R_MIPS_TLS_TPREL_LO16 50 /* TP-relative offset, low 16 bits */ -+#define R_MIPS_GLOB_DAT 51 -+#define R_MIPS_COPY 126 -+#define R_MIPS_JUMP_SLOT 127 -+/* Keep this the last entry. */ -+#define R_MIPS_NUM 128 -+ -+/* Legal values for p_type field of Elf32_Phdr. */ -+ -+#define PT_MIPS_REGINFO 0x70000000 /* Register usage information */ -+#define PT_MIPS_RTPROC 0x70000001 /* Runtime procedure table. */ -+#define PT_MIPS_OPTIONS 0x70000002 -+ -+/* Special program header types. */ -+ -+#define PF_MIPS_LOCAL 0x10000000 -+ -+/* Legal values for d_tag field of Elf32_Dyn. */ -+ -+#define DT_MIPS_RLD_VERSION 0x70000001 /* Runtime linker interface version */ -+#define DT_MIPS_TIME_STAMP 0x70000002 /* Timestamp */ -+#define DT_MIPS_ICHECKSUM 0x70000003 /* Checksum */ -+#define DT_MIPS_IVERSION 0x70000004 /* Version string (string tbl index) */ -+#define DT_MIPS_FLAGS 0x70000005 /* Flags */ -+#define DT_MIPS_BASE_ADDRESS 0x70000006 /* Base address */ -+#define DT_MIPS_MSYM 0x70000007 -+#define DT_MIPS_CONFLICT 0x70000008 /* Address of CONFLICT section */ -+#define DT_MIPS_LIBLIST 0x70000009 /* Address of LIBLIST section */ -+#define DT_MIPS_LOCAL_GOTNO 0x7000000a /* Number of local GOT entries */ -+#define DT_MIPS_CONFLICTNO 0x7000000b /* Number of CONFLICT entries */ -+#define DT_MIPS_LIBLISTNO 0x70000010 /* Number of LIBLIST entries */ -+#define DT_MIPS_SYMTABNO 0x70000011 /* Number of DYNSYM entries */ -+#define DT_MIPS_UNREFEXTNO 0x70000012 /* First external DYNSYM */ -+#define DT_MIPS_GOTSYM 0x70000013 /* First GOT entry in DYNSYM */ -+#define DT_MIPS_HIPAGENO 0x70000014 /* Number of GOT page table entries */ -+#define DT_MIPS_RLD_MAP 0x70000016 /* Address of run time loader map. */ -+#define DT_MIPS_DELTA_CLASS 0x70000017 /* Delta C++ class definition. */ -+#define DT_MIPS_DELTA_CLASS_NO 0x70000018 /* Number of entries in -+ DT_MIPS_DELTA_CLASS. */ -+#define DT_MIPS_DELTA_INSTANCE 0x70000019 /* Delta C++ class instances. */ -+#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in -+ DT_MIPS_DELTA_INSTANCE. */ -+#define DT_MIPS_DELTA_RELOC 0x7000001b /* Delta relocations. */ -+#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in -+ DT_MIPS_DELTA_RELOC. */ -+#define DT_MIPS_DELTA_SYM 0x7000001d /* Delta symbols that Delta -+ relocations refer to. */ -+#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in -+ DT_MIPS_DELTA_SYM. */ -+#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the -+ class declaration. */ -+#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in -+ DT_MIPS_DELTA_CLASSSYM. */ -+#define DT_MIPS_CXX_FLAGS 0x70000022 /* Flags indicating for C++ flavor. */ -+#define DT_MIPS_PIXIE_INIT 0x70000023 -+#define DT_MIPS_SYMBOL_LIB 0x70000024 -+#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025 -+#define DT_MIPS_LOCAL_GOTIDX 0x70000026 -+#define DT_MIPS_HIDDEN_GOTIDX 0x70000027 -+#define DT_MIPS_PROTECTED_GOTIDX 0x70000028 -+#define DT_MIPS_OPTIONS 0x70000029 /* Address of .options. */ -+#define DT_MIPS_INTERFACE 0x7000002a /* Address of .interface. */ -+#define DT_MIPS_DYNSTR_ALIGN 0x7000002b -+#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */ -+#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve -+ function stored in GOT. */ -+#define DT_MIPS_PERF_SUFFIX 0x7000002e /* Default suffix of dso to be added -+ by rld on dlopen() calls. */ -+#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */ -+#define DT_MIPS_GP_VALUE 0x70000030 /* GP value for aux GOTs. */ -+#define DT_MIPS_AUX_DYNAMIC 0x70000031 /* Address of aux .dynamic. */ -+/* The address of .got.plt in an executable using the new non-PIC ABI. */ -+#define DT_MIPS_PLTGOT 0x70000032 -+/* The base of the PLT in an executable using the new non-PIC ABI if that -+ PLT is writable. For a non-writable PLT, this is omitted or has a zero -+ value. */ -+#define DT_MIPS_RWPLT 0x70000034 -+#define DT_MIPS_NUM 0x35 -+ -+/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry. */ -+ -+#define RHF_NONE 0 /* No flags */ -+#define RHF_QUICKSTART (1 << 0) /* Use quickstart */ -+#define RHF_NOTPOT (1 << 1) /* Hash size not power of 2 */ -+#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2) /* Ignore LD_LIBRARY_PATH */ -+#define RHF_NO_MOVE (1 << 3) -+#define RHF_SGI_ONLY (1 << 4) -+#define RHF_GUARANTEE_INIT (1 << 5) -+#define RHF_DELTA_C_PLUS_PLUS (1 << 6) -+#define RHF_GUARANTEE_START_INIT (1 << 7) -+#define RHF_PIXIE (1 << 8) -+#define RHF_DEFAULT_DELAY_LOAD (1 << 9) -+#define RHF_REQUICKSTART (1 << 10) -+#define RHF_REQUICKSTARTED (1 << 11) -+#define RHF_CORD (1 << 12) -+#define RHF_NO_UNRES_UNDEF (1 << 13) -+#define RHF_RLD_ORDER_SAFE (1 << 14) -+ -+/* Entries found in sections of type SHT_MIPS_LIBLIST. */ -+ -+typedef struct -+{ -+ Elf32_Word l_name; /* Name (string table index) */ -+ Elf32_Word l_time_stamp; /* Timestamp */ -+ Elf32_Word l_checksum; /* Checksum */ -+ Elf32_Word l_version; /* Interface version */ -+ Elf32_Word l_flags; /* Flags */ -+} Elf32_Lib; -+ -+typedef struct -+{ -+ Elf64_Word l_name; /* Name (string table index) */ -+ Elf64_Word l_time_stamp; /* Timestamp */ -+ Elf64_Word l_checksum; /* Checksum */ -+ Elf64_Word l_version; /* Interface version */ -+ Elf64_Word l_flags; /* Flags */ -+} Elf64_Lib; -+ -+ -+/* Legal values for l_flags. */ -+ -+#define LL_NONE 0 -+#define LL_EXACT_MATCH (1 << 0) /* Require exact match */ -+#define LL_IGNORE_INT_VER (1 << 1) /* Ignore interface version */ -+#define LL_REQUIRE_MINOR (1 << 2) -+#define LL_EXPORTS (1 << 3) -+#define LL_DELAY_LOAD (1 << 4) -+#define LL_DELTA (1 << 5) -+ -+/* Entries found in sections of type SHT_MIPS_CONFLICT. */ -+ -+typedef Elf32_Addr Elf32_Conflict; -+ -+ -+/* HPPA specific definitions. */ -+ -+/* Legal values for e_flags field of Elf32_Ehdr. */ -+ -+#define EF_PARISC_TRAPNIL 0x00010000 /* Trap nil pointer dereference. */ -+#define EF_PARISC_EXT 0x00020000 /* Program uses arch. extensions. */ -+#define EF_PARISC_LSB 0x00040000 /* Program expects little endian. */ -+#define EF_PARISC_WIDE 0x00080000 /* Program expects wide mode. */ -+#define EF_PARISC_NO_KABP 0x00100000 /* No kernel assisted branch -+ prediction. */ -+#define EF_PARISC_LAZYSWAP 0x00400000 /* Allow lazy swapping. */ -+#define EF_PARISC_ARCH 0x0000ffff /* Architecture version. */ -+ -+/* Defined values for `e_flags & EF_PARISC_ARCH' are: */ -+ -+#define EFA_PARISC_1_0 0x020b /* PA-RISC 1.0 big-endian. */ -+#define EFA_PARISC_1_1 0x0210 /* PA-RISC 1.1 big-endian. */ -+#define EFA_PARISC_2_0 0x0214 /* PA-RISC 2.0 big-endian. */ -+ -+/* Additional section indeces. */ -+ -+#define SHN_PARISC_ANSI_COMMON 0xff00 /* Section for tenatively declared -+ symbols in ANSI C. */ -+#define SHN_PARISC_HUGE_COMMON 0xff01 /* Common blocks in huge model. */ -+ -+/* Legal values for sh_type field of Elf32_Shdr. */ -+ -+#define SHT_PARISC_EXT 0x70000000 /* Contains product specific ext. */ -+#define SHT_PARISC_UNWIND 0x70000001 /* Unwind information. */ -+#define SHT_PARISC_DOC 0x70000002 /* Debug info for optimized code. */ -+ -+/* Legal values for sh_flags field of Elf32_Shdr. */ -+ -+#define SHF_PARISC_SHORT 0x20000000 /* Section with short addressing. */ -+#define SHF_PARISC_HUGE 0x40000000 /* Section far from gp. */ -+#define SHF_PARISC_SBP 0x80000000 /* Static branch prediction code. */ -+ -+/* Legal values for ST_TYPE subfield of st_info (symbol type). */ -+ -+#define STT_PARISC_MILLICODE 13 /* Millicode function entry point. */ -+ -+#define STT_HP_OPAQUE (STT_LOOS + 0x1) -+#define STT_HP_STUB (STT_LOOS + 0x2) -+ -+/* HPPA relocs. */ -+ -+#define R_PARISC_NONE 0 /* No reloc. */ -+#define R_PARISC_DIR32 1 /* Direct 32-bit reference. */ -+#define R_PARISC_DIR21L 2 /* Left 21 bits of eff. address. */ -+#define R_PARISC_DIR17R 3 /* Right 17 bits of eff. address. */ -+#define R_PARISC_DIR17F 4 /* 17 bits of eff. address. */ -+#define R_PARISC_DIR14R 6 /* Right 14 bits of eff. address. */ -+#define R_PARISC_PCREL32 9 /* 32-bit rel. address. */ -+#define R_PARISC_PCREL21L 10 /* Left 21 bits of rel. address. */ -+#define R_PARISC_PCREL17R 11 /* Right 17 bits of rel. address. */ -+#define R_PARISC_PCREL17F 12 /* 17 bits of rel. address. */ -+#define R_PARISC_PCREL14R 14 /* Right 14 bits of rel. address. */ -+#define R_PARISC_DPREL21L 18 /* Left 21 bits of rel. address. */ -+#define R_PARISC_DPREL14R 22 /* Right 14 bits of rel. address. */ -+#define R_PARISC_GPREL21L 26 /* GP-relative, left 21 bits. */ -+#define R_PARISC_GPREL14R 30 /* GP-relative, right 14 bits. */ -+#define R_PARISC_LTOFF21L 34 /* LT-relative, left 21 bits. */ -+#define R_PARISC_LTOFF14R 38 /* LT-relative, right 14 bits. */ -+#define R_PARISC_SECREL32 41 /* 32 bits section rel. address. */ -+#define R_PARISC_SEGBASE 48 /* No relocation, set segment base. */ -+#define R_PARISC_SEGREL32 49 /* 32 bits segment rel. address. */ -+#define R_PARISC_PLTOFF21L 50 /* PLT rel. address, left 21 bits. */ -+#define R_PARISC_PLTOFF14R 54 /* PLT rel. address, right 14 bits. */ -+#define R_PARISC_LTOFF_FPTR32 57 /* 32 bits LT-rel. function pointer. */ -+#define R_PARISC_LTOFF_FPTR21L 58 /* LT-rel. fct ptr, left 21 bits. */ -+#define R_PARISC_LTOFF_FPTR14R 62 /* LT-rel. fct ptr, right 14 bits. */ -+#define R_PARISC_FPTR64 64 /* 64 bits function address. */ -+#define R_PARISC_PLABEL32 65 /* 32 bits function address. */ -+#define R_PARISC_PLABEL21L 66 /* Left 21 bits of fdesc address. */ -+#define R_PARISC_PLABEL14R 70 /* Right 14 bits of fdesc address. */ -+#define R_PARISC_PCREL64 72 /* 64 bits PC-rel. address. */ -+#define R_PARISC_PCREL22F 74 /* 22 bits PC-rel. address. */ -+#define R_PARISC_PCREL14WR 75 /* PC-rel. address, right 14 bits. */ -+#define R_PARISC_PCREL14DR 76 /* PC rel. address, right 14 bits. */ -+#define R_PARISC_PCREL16F 77 /* 16 bits PC-rel. address. */ -+#define R_PARISC_PCREL16WF 78 /* 16 bits PC-rel. address. */ -+#define R_PARISC_PCREL16DF 79 /* 16 bits PC-rel. address. */ -+#define R_PARISC_DIR64 80 /* 64 bits of eff. address. */ -+#define R_PARISC_DIR14WR 83 /* 14 bits of eff. address. */ -+#define R_PARISC_DIR14DR 84 /* 14 bits of eff. address. */ -+#define R_PARISC_DIR16F 85 /* 16 bits of eff. address. */ -+#define R_PARISC_DIR16WF 86 /* 16 bits of eff. address. */ -+#define R_PARISC_DIR16DF 87 /* 16 bits of eff. address. */ -+#define R_PARISC_GPREL64 88 /* 64 bits of GP-rel. address. */ -+#define R_PARISC_GPREL14WR 91 /* GP-rel. address, right 14 bits. */ -+#define R_PARISC_GPREL14DR 92 /* GP-rel. address, right 14 bits. */ -+#define R_PARISC_GPREL16F 93 /* 16 bits GP-rel. address. */ -+#define R_PARISC_GPREL16WF 94 /* 16 bits GP-rel. address. */ -+#define R_PARISC_GPREL16DF 95 /* 16 bits GP-rel. address. */ -+#define R_PARISC_LTOFF64 96 /* 64 bits LT-rel. address. */ -+#define R_PARISC_LTOFF14WR 99 /* LT-rel. address, right 14 bits. */ -+#define R_PARISC_LTOFF14DR 100 /* LT-rel. address, right 14 bits. */ -+#define R_PARISC_LTOFF16F 101 /* 16 bits LT-rel. address. */ -+#define R_PARISC_LTOFF16WF 102 /* 16 bits LT-rel. address. */ -+#define R_PARISC_LTOFF16DF 103 /* 16 bits LT-rel. address. */ -+#define R_PARISC_SECREL64 104 /* 64 bits section rel. address. */ -+#define R_PARISC_SEGREL64 112 /* 64 bits segment rel. address. */ -+#define R_PARISC_PLTOFF14WR 115 /* PLT-rel. address, right 14 bits. */ -+#define R_PARISC_PLTOFF14DR 116 /* PLT-rel. address, right 14 bits. */ -+#define R_PARISC_PLTOFF16F 117 /* 16 bits LT-rel. address. */ -+#define R_PARISC_PLTOFF16WF 118 /* 16 bits PLT-rel. address. */ -+#define R_PARISC_PLTOFF16DF 119 /* 16 bits PLT-rel. address. */ -+#define R_PARISC_LTOFF_FPTR64 120 /* 64 bits LT-rel. function ptr. */ -+#define R_PARISC_LTOFF_FPTR14WR 123 /* LT-rel. fct. ptr., right 14 bits. */ -+#define R_PARISC_LTOFF_FPTR14DR 124 /* LT-rel. fct. ptr., right 14 bits. */ -+#define R_PARISC_LTOFF_FPTR16F 125 /* 16 bits LT-rel. function ptr. */ -+#define R_PARISC_LTOFF_FPTR16WF 126 /* 16 bits LT-rel. function ptr. */ -+#define R_PARISC_LTOFF_FPTR16DF 127 /* 16 bits LT-rel. function ptr. */ -+#define R_PARISC_LORESERVE 128 -+#define R_PARISC_COPY 128 /* Copy relocation. */ -+#define R_PARISC_IPLT 129 /* Dynamic reloc, imported PLT */ -+#define R_PARISC_EPLT 130 /* Dynamic reloc, exported PLT */ -+#define R_PARISC_TPREL32 153 /* 32 bits TP-rel. address. */ -+#define R_PARISC_TPREL21L 154 /* TP-rel. address, left 21 bits. */ -+#define R_PARISC_TPREL14R 158 /* TP-rel. address, right 14 bits. */ -+#define R_PARISC_LTOFF_TP21L 162 /* LT-TP-rel. address, left 21 bits. */ -+#define R_PARISC_LTOFF_TP14R 166 /* LT-TP-rel. address, right 14 bits.*/ -+#define R_PARISC_LTOFF_TP14F 167 /* 14 bits LT-TP-rel. address. */ -+#define R_PARISC_TPREL64 216 /* 64 bits TP-rel. address. */ -+#define R_PARISC_TPREL14WR 219 /* TP-rel. address, right 14 bits. */ -+#define R_PARISC_TPREL14DR 220 /* TP-rel. address, right 14 bits. */ -+#define R_PARISC_TPREL16F 221 /* 16 bits TP-rel. address. */ -+#define R_PARISC_TPREL16WF 222 /* 16 bits TP-rel. address. */ -+#define R_PARISC_TPREL16DF 223 /* 16 bits TP-rel. address. */ -+#define R_PARISC_LTOFF_TP64 224 /* 64 bits LT-TP-rel. address. */ -+#define R_PARISC_LTOFF_TP14WR 227 /* LT-TP-rel. address, right 14 bits.*/ -+#define R_PARISC_LTOFF_TP14DR 228 /* LT-TP-rel. address, right 14 bits.*/ -+#define R_PARISC_LTOFF_TP16F 229 /* 16 bits LT-TP-rel. address. */ -+#define R_PARISC_LTOFF_TP16WF 230 /* 16 bits LT-TP-rel. address. */ -+#define R_PARISC_LTOFF_TP16DF 231 /* 16 bits LT-TP-rel. address. */ -+#define R_PARISC_GNU_VTENTRY 232 -+#define R_PARISC_GNU_VTINHERIT 233 -+#define R_PARISC_TLS_GD21L 234 /* GD 21-bit left. */ -+#define R_PARISC_TLS_GD14R 235 /* GD 14-bit right. */ -+#define R_PARISC_TLS_GDCALL 236 /* GD call to __t_g_a. */ -+#define R_PARISC_TLS_LDM21L 237 /* LD module 21-bit left. */ -+#define R_PARISC_TLS_LDM14R 238 /* LD module 14-bit right. */ -+#define R_PARISC_TLS_LDMCALL 239 /* LD module call to __t_g_a. */ -+#define R_PARISC_TLS_LDO21L 240 /* LD offset 21-bit left. */ -+#define R_PARISC_TLS_LDO14R 241 /* LD offset 14-bit right. */ -+#define R_PARISC_TLS_DTPMOD32 242 /* DTP module 32-bit. */ -+#define R_PARISC_TLS_DTPMOD64 243 /* DTP module 64-bit. */ -+#define R_PARISC_TLS_DTPOFF32 244 /* DTP offset 32-bit. */ -+#define R_PARISC_TLS_DTPOFF64 245 /* DTP offset 32-bit. */ -+#define R_PARISC_TLS_LE21L R_PARISC_TPREL21L -+#define R_PARISC_TLS_LE14R R_PARISC_TPREL14R -+#define R_PARISC_TLS_IE21L R_PARISC_LTOFF_TP21L -+#define R_PARISC_TLS_IE14R R_PARISC_LTOFF_TP14R -+#define R_PARISC_TLS_TPREL32 R_PARISC_TPREL32 -+#define R_PARISC_TLS_TPREL64 R_PARISC_TPREL64 -+#define R_PARISC_HIRESERVE 255 -+ -+/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr. */ -+ -+#define PT_HP_TLS (PT_LOOS + 0x0) -+#define PT_HP_CORE_NONE (PT_LOOS + 0x1) -+#define PT_HP_CORE_VERSION (PT_LOOS + 0x2) -+#define PT_HP_CORE_KERNEL (PT_LOOS + 0x3) -+#define PT_HP_CORE_COMM (PT_LOOS + 0x4) -+#define PT_HP_CORE_PROC (PT_LOOS + 0x5) -+#define PT_HP_CORE_LOADABLE (PT_LOOS + 0x6) -+#define PT_HP_CORE_STACK (PT_LOOS + 0x7) -+#define PT_HP_CORE_SHM (PT_LOOS + 0x8) -+#define PT_HP_CORE_MMF (PT_LOOS + 0x9) -+#define PT_HP_PARALLEL (PT_LOOS + 0x10) -+#define PT_HP_FASTBIND (PT_LOOS + 0x11) -+#define PT_HP_OPT_ANNOT (PT_LOOS + 0x12) -+#define PT_HP_HSL_ANNOT (PT_LOOS + 0x13) -+#define PT_HP_STACK (PT_LOOS + 0x14) -+ -+#define PT_PARISC_ARCHEXT 0x70000000 -+#define PT_PARISC_UNWIND 0x70000001 -+ -+/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr. */ -+ -+#define PF_PARISC_SBP 0x08000000 -+ -+#define PF_HP_PAGE_SIZE 0x00100000 -+#define PF_HP_FAR_SHARED 0x00200000 -+#define PF_HP_NEAR_SHARED 0x00400000 -+#define PF_HP_CODE 0x01000000 -+#define PF_HP_MODIFY 0x02000000 -+#define PF_HP_LAZYSWAP 0x04000000 -+#define PF_HP_SBP 0x08000000 -+ -+ -+/* Alpha specific definitions. */ -+ -+/* Legal values for e_flags field of Elf64_Ehdr. */ -+ -+#define EF_ALPHA_32BIT 1 /* All addresses must be < 2GB. */ -+#define EF_ALPHA_CANRELAX 2 /* Relocations for relaxing exist. */ -+ -+/* Legal values for sh_type field of Elf64_Shdr. */ -+ -+/* These two are primerily concerned with ECOFF debugging info. */ -+#define SHT_ALPHA_DEBUG 0x70000001 -+#define SHT_ALPHA_REGINFO 0x70000002 -+ -+/* Legal values for sh_flags field of Elf64_Shdr. */ -+ -+#define SHF_ALPHA_GPREL 0x10000000 -+ -+/* Legal values for st_other field of Elf64_Sym. */ -+#define STO_ALPHA_NOPV 0x80 /* No PV required. */ -+#define STO_ALPHA_STD_GPLOAD 0x88 /* PV only used for initial ldgp. */ -+ -+/* Alpha relocs. */ -+ -+#define R_ALPHA_NONE 0 /* No reloc */ -+#define R_ALPHA_REFLONG 1 /* Direct 32 bit */ -+#define R_ALPHA_REFQUAD 2 /* Direct 64 bit */ -+#define R_ALPHA_GPREL32 3 /* GP relative 32 bit */ -+#define R_ALPHA_LITERAL 4 /* GP relative 16 bit w/optimization */ -+#define R_ALPHA_LITUSE 5 /* Optimization hint for LITERAL */ -+#define R_ALPHA_GPDISP 6 /* Add displacement to GP */ -+#define R_ALPHA_BRADDR 7 /* PC+4 relative 23 bit shifted */ -+#define R_ALPHA_HINT 8 /* PC+4 relative 16 bit shifted */ -+#define R_ALPHA_SREL16 9 /* PC relative 16 bit */ -+#define R_ALPHA_SREL32 10 /* PC relative 32 bit */ -+#define R_ALPHA_SREL64 11 /* PC relative 64 bit */ -+#define R_ALPHA_GPRELHIGH 17 /* GP relative 32 bit, high 16 bits */ -+#define R_ALPHA_GPRELLOW 18 /* GP relative 32 bit, low 16 bits */ -+#define R_ALPHA_GPREL16 19 /* GP relative 16 bit */ -+#define R_ALPHA_COPY 24 /* Copy symbol at runtime */ -+#define R_ALPHA_GLOB_DAT 25 /* Create GOT entry */ -+#define R_ALPHA_JMP_SLOT 26 /* Create PLT entry */ -+#define R_ALPHA_RELATIVE 27 /* Adjust by program base */ -+#define R_ALPHA_TLS_GD_HI 28 -+#define R_ALPHA_TLSGD 29 -+#define R_ALPHA_TLS_LDM 30 -+#define R_ALPHA_DTPMOD64 31 -+#define R_ALPHA_GOTDTPREL 32 -+#define R_ALPHA_DTPREL64 33 -+#define R_ALPHA_DTPRELHI 34 -+#define R_ALPHA_DTPRELLO 35 -+#define R_ALPHA_DTPREL16 36 -+#define R_ALPHA_GOTTPREL 37 -+#define R_ALPHA_TPREL64 38 -+#define R_ALPHA_TPRELHI 39 -+#define R_ALPHA_TPRELLO 40 -+#define R_ALPHA_TPREL16 41 -+/* Keep this the last entry. */ -+#define R_ALPHA_NUM 46 -+ -+/* Magic values of the LITUSE relocation addend. */ -+#define LITUSE_ALPHA_ADDR 0 -+#define LITUSE_ALPHA_BASE 1 -+#define LITUSE_ALPHA_BYTOFF 2 -+#define LITUSE_ALPHA_JSR 3 -+#define LITUSE_ALPHA_TLS_GD 4 -+#define LITUSE_ALPHA_TLS_LDM 5 -+ -+/* Legal values for d_tag of Elf64_Dyn. */ -+#define DT_ALPHA_PLTRO (DT_LOPROC + 0) -+#define DT_ALPHA_NUM 1 -+ -+/* PowerPC specific declarations */ -+ -+/* Values for Elf32/64_Ehdr.e_flags. */ -+#define EF_PPC_EMB 0x80000000 /* PowerPC embedded flag */ -+ -+/* Cygnus local bits below */ -+#define EF_PPC_RELOCATABLE 0x00010000 /* PowerPC -mrelocatable flag*/ -+#define EF_PPC_RELOCATABLE_LIB 0x00008000 /* PowerPC -mrelocatable-lib -+ flag */ -+ -+/* PowerPC relocations defined by the ABIs */ -+#define R_PPC_NONE 0 -+#define R_PPC_ADDR32 1 /* 32bit absolute address */ -+#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */ -+#define R_PPC_ADDR16 3 /* 16bit absolute address */ -+#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */ -+#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */ -+#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */ -+#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */ -+#define R_PPC_ADDR14_BRTAKEN 8 -+#define R_PPC_ADDR14_BRNTAKEN 9 -+#define R_PPC_REL24 10 /* PC relative 26 bit */ -+#define R_PPC_REL14 11 /* PC relative 16 bit */ -+#define R_PPC_REL14_BRTAKEN 12 -+#define R_PPC_REL14_BRNTAKEN 13 -+#define R_PPC_GOT16 14 -+#define R_PPC_GOT16_LO 15 -+#define R_PPC_GOT16_HI 16 -+#define R_PPC_GOT16_HA 17 -+#define R_PPC_PLTREL24 18 -+#define R_PPC_COPY 19 -+#define R_PPC_GLOB_DAT 20 -+#define R_PPC_JMP_SLOT 21 -+#define R_PPC_RELATIVE 22 -+#define R_PPC_LOCAL24PC 23 -+#define R_PPC_UADDR32 24 -+#define R_PPC_UADDR16 25 -+#define R_PPC_REL32 26 -+#define R_PPC_PLT32 27 -+#define R_PPC_PLTREL32 28 -+#define R_PPC_PLT16_LO 29 -+#define R_PPC_PLT16_HI 30 -+#define R_PPC_PLT16_HA 31 -+#define R_PPC_SDAREL16 32 -+#define R_PPC_SECTOFF 33 -+#define R_PPC_SECTOFF_LO 34 -+#define R_PPC_SECTOFF_HI 35 -+#define R_PPC_SECTOFF_HA 36 -+ -+/* PowerPC relocations defined for the TLS access ABI. */ -+#define R_PPC_TLS 67 /* none (sym+add)@tls */ -+#define R_PPC_DTPMOD32 68 /* word32 (sym+add)@dtpmod */ -+#define R_PPC_TPREL16 69 /* half16* (sym+add)@tprel */ -+#define R_PPC_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */ -+#define R_PPC_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */ -+#define R_PPC_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */ -+#define R_PPC_TPREL32 73 /* word32 (sym+add)@tprel */ -+#define R_PPC_DTPREL16 74 /* half16* (sym+add)@dtprel */ -+#define R_PPC_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */ -+#define R_PPC_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */ -+#define R_PPC_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */ -+#define R_PPC_DTPREL32 78 /* word32 (sym+add)@dtprel */ -+#define R_PPC_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */ -+#define R_PPC_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */ -+#define R_PPC_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */ -+#define R_PPC_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */ -+#define R_PPC_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */ -+#define R_PPC_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */ -+#define R_PPC_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */ -+#define R_PPC_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */ -+#define R_PPC_GOT_TPREL16 87 /* half16* (sym+add)@got@tprel */ -+#define R_PPC_GOT_TPREL16_LO 88 /* half16 (sym+add)@got@tprel@l */ -+#define R_PPC_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */ -+#define R_PPC_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */ -+#define R_PPC_GOT_DTPREL16 91 /* half16* (sym+add)@got@dtprel */ -+#define R_PPC_GOT_DTPREL16_LO 92 /* half16* (sym+add)@got@dtprel@l */ -+#define R_PPC_GOT_DTPREL16_HI 93 /* half16* (sym+add)@got@dtprel@h */ -+#define R_PPC_GOT_DTPREL16_HA 94 /* half16* (sym+add)@got@dtprel@ha */ -+ -+/* The remaining relocs are from the Embedded ELF ABI, and are not -+ in the SVR4 ELF ABI. */ -+#define R_PPC_EMB_NADDR32 101 -+#define R_PPC_EMB_NADDR16 102 -+#define R_PPC_EMB_NADDR16_LO 103 -+#define R_PPC_EMB_NADDR16_HI 104 -+#define R_PPC_EMB_NADDR16_HA 105 -+#define R_PPC_EMB_SDAI16 106 -+#define R_PPC_EMB_SDA2I16 107 -+#define R_PPC_EMB_SDA2REL 108 -+#define R_PPC_EMB_SDA21 109 /* 16 bit offset in SDA */ -+#define R_PPC_EMB_MRKREF 110 -+#define R_PPC_EMB_RELSEC16 111 -+#define R_PPC_EMB_RELST_LO 112 -+#define R_PPC_EMB_RELST_HI 113 -+#define R_PPC_EMB_RELST_HA 114 -+#define R_PPC_EMB_BIT_FLD 115 -+#define R_PPC_EMB_RELSDA 116 /* 16 bit relative offset in SDA */ -+ -+/* Diab tool relocations. */ -+#define R_PPC_DIAB_SDA21_LO 180 /* like EMB_SDA21, but lower 16 bit */ -+#define R_PPC_DIAB_SDA21_HI 181 /* like EMB_SDA21, but high 16 bit */ -+#define R_PPC_DIAB_SDA21_HA 182 /* like EMB_SDA21, adjusted high 16 */ -+#define R_PPC_DIAB_RELSDA_LO 183 /* like EMB_RELSDA, but lower 16 bit */ -+#define R_PPC_DIAB_RELSDA_HI 184 /* like EMB_RELSDA, but high 16 bit */ -+#define R_PPC_DIAB_RELSDA_HA 185 /* like EMB_RELSDA, adjusted high 16 */ -+ -+/* GNU extension to support local ifunc. */ -+#define R_PPC_IRELATIVE 248 -+ -+/* GNU relocs used in PIC code sequences. */ -+#define R_PPC_REL16 249 /* half16 (sym+add-.) */ -+#define R_PPC_REL16_LO 250 /* half16 (sym+add-.)@l */ -+#define R_PPC_REL16_HI 251 /* half16 (sym+add-.)@h */ -+#define R_PPC_REL16_HA 252 /* half16 (sym+add-.)@ha */ -+ -+/* This is a phony reloc to handle any old fashioned TOC16 references -+ that may still be in object files. */ -+#define R_PPC_TOC16 255 -+ -+/* PowerPC specific values for the Dyn d_tag field. */ -+#define DT_PPC_GOT (DT_LOPROC + 0) -+#define DT_PPC_NUM 1 -+ -+/* PowerPC64 relocations defined by the ABIs */ -+#define R_PPC64_NONE R_PPC_NONE -+#define R_PPC64_ADDR32 R_PPC_ADDR32 /* 32bit absolute address */ -+#define R_PPC64_ADDR24 R_PPC_ADDR24 /* 26bit address, word aligned */ -+#define R_PPC64_ADDR16 R_PPC_ADDR16 /* 16bit absolute address */ -+#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of address */ -+#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of address. */ -+#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits. */ -+#define R_PPC64_ADDR14 R_PPC_ADDR14 /* 16bit address, word aligned */ -+#define R_PPC64_ADDR14_BRTAKEN R_PPC_ADDR14_BRTAKEN -+#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN -+#define R_PPC64_REL24 R_PPC_REL24 /* PC-rel. 26 bit, word aligned */ -+#define R_PPC64_REL14 R_PPC_REL14 /* PC relative 16 bit */ -+#define R_PPC64_REL14_BRTAKEN R_PPC_REL14_BRTAKEN -+#define R_PPC64_REL14_BRNTAKEN R_PPC_REL14_BRNTAKEN -+#define R_PPC64_GOT16 R_PPC_GOT16 -+#define R_PPC64_GOT16_LO R_PPC_GOT16_LO -+#define R_PPC64_GOT16_HI R_PPC_GOT16_HI -+#define R_PPC64_GOT16_HA R_PPC_GOT16_HA -+ -+#define R_PPC64_COPY R_PPC_COPY -+#define R_PPC64_GLOB_DAT R_PPC_GLOB_DAT -+#define R_PPC64_JMP_SLOT R_PPC_JMP_SLOT -+#define R_PPC64_RELATIVE R_PPC_RELATIVE -+ -+#define R_PPC64_UADDR32 R_PPC_UADDR32 -+#define R_PPC64_UADDR16 R_PPC_UADDR16 -+#define R_PPC64_REL32 R_PPC_REL32 -+#define R_PPC64_PLT32 R_PPC_PLT32 -+#define R_PPC64_PLTREL32 R_PPC_PLTREL32 -+#define R_PPC64_PLT16_LO R_PPC_PLT16_LO -+#define R_PPC64_PLT16_HI R_PPC_PLT16_HI -+#define R_PPC64_PLT16_HA R_PPC_PLT16_HA -+ -+#define R_PPC64_SECTOFF R_PPC_SECTOFF -+#define R_PPC64_SECTOFF_LO R_PPC_SECTOFF_LO -+#define R_PPC64_SECTOFF_HI R_PPC_SECTOFF_HI -+#define R_PPC64_SECTOFF_HA R_PPC_SECTOFF_HA -+#define R_PPC64_ADDR30 37 /* word30 (S + A - P) >> 2 */ -+#define R_PPC64_ADDR64 38 /* doubleword64 S + A */ -+#define R_PPC64_ADDR16_HIGHER 39 /* half16 #higher(S + A) */ -+#define R_PPC64_ADDR16_HIGHERA 40 /* half16 #highera(S + A) */ -+#define R_PPC64_ADDR16_HIGHEST 41 /* half16 #highest(S + A) */ -+#define R_PPC64_ADDR16_HIGHESTA 42 /* half16 #highesta(S + A) */ -+#define R_PPC64_UADDR64 43 /* doubleword64 S + A */ -+#define R_PPC64_REL64 44 /* doubleword64 S + A - P */ -+#define R_PPC64_PLT64 45 /* doubleword64 L + A */ -+#define R_PPC64_PLTREL64 46 /* doubleword64 L + A - P */ -+#define R_PPC64_TOC16 47 /* half16* S + A - .TOC */ -+#define R_PPC64_TOC16_LO 48 /* half16 #lo(S + A - .TOC.) */ -+#define R_PPC64_TOC16_HI 49 /* half16 #hi(S + A - .TOC.) */ -+#define R_PPC64_TOC16_HA 50 /* half16 #ha(S + A - .TOC.) */ -+#define R_PPC64_TOC 51 /* doubleword64 .TOC */ -+#define R_PPC64_PLTGOT16 52 /* half16* M + A */ -+#define R_PPC64_PLTGOT16_LO 53 /* half16 #lo(M + A) */ -+#define R_PPC64_PLTGOT16_HI 54 /* half16 #hi(M + A) */ -+#define R_PPC64_PLTGOT16_HA 55 /* half16 #ha(M + A) */ -+ -+#define R_PPC64_ADDR16_DS 56 /* half16ds* (S + A) >> 2 */ -+#define R_PPC64_ADDR16_LO_DS 57 /* half16ds #lo(S + A) >> 2 */ -+#define R_PPC64_GOT16_DS 58 /* half16ds* (G + A) >> 2 */ -+#define R_PPC64_GOT16_LO_DS 59 /* half16ds #lo(G + A) >> 2 */ -+#define R_PPC64_PLT16_LO_DS 60 /* half16ds #lo(L + A) >> 2 */ -+#define R_PPC64_SECTOFF_DS 61 /* half16ds* (R + A) >> 2 */ -+#define R_PPC64_SECTOFF_LO_DS 62 /* half16ds #lo(R + A) >> 2 */ -+#define R_PPC64_TOC16_DS 63 /* half16ds* (S + A - .TOC.) >> 2 */ -+#define R_PPC64_TOC16_LO_DS 64 /* half16ds #lo(S + A - .TOC.) >> 2 */ -+#define R_PPC64_PLTGOT16_DS 65 /* half16ds* (M + A) >> 2 */ -+#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds #lo(M + A) >> 2 */ -+ -+/* PowerPC64 relocations defined for the TLS access ABI. */ -+#define R_PPC64_TLS 67 /* none (sym+add)@tls */ -+#define R_PPC64_DTPMOD64 68 /* doubleword64 (sym+add)@dtpmod */ -+#define R_PPC64_TPREL16 69 /* half16* (sym+add)@tprel */ -+#define R_PPC64_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */ -+#define R_PPC64_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */ -+#define R_PPC64_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */ -+#define R_PPC64_TPREL64 73 /* doubleword64 (sym+add)@tprel */ -+#define R_PPC64_DTPREL16 74 /* half16* (sym+add)@dtprel */ -+#define R_PPC64_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */ -+#define R_PPC64_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */ -+#define R_PPC64_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */ -+#define R_PPC64_DTPREL64 78 /* doubleword64 (sym+add)@dtprel */ -+#define R_PPC64_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */ -+#define R_PPC64_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */ -+#define R_PPC64_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */ -+#define R_PPC64_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */ -+#define R_PPC64_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */ -+#define R_PPC64_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */ -+#define R_PPC64_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */ -+#define R_PPC64_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */ -+#define R_PPC64_GOT_TPREL16_DS 87 /* half16ds* (sym+add)@got@tprel */ -+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */ -+#define R_PPC64_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */ -+#define R_PPC64_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */ -+#define R_PPC64_GOT_DTPREL16_DS 91 /* half16ds* (sym+add)@got@dtprel */ -+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */ -+#define R_PPC64_GOT_DTPREL16_HI 93 /* half16 (sym+add)@got@dtprel@h */ -+#define R_PPC64_GOT_DTPREL16_HA 94 /* half16 (sym+add)@got@dtprel@ha */ -+#define R_PPC64_TPREL16_DS 95 /* half16ds* (sym+add)@tprel */ -+#define R_PPC64_TPREL16_LO_DS 96 /* half16ds (sym+add)@tprel@l */ -+#define R_PPC64_TPREL16_HIGHER 97 /* half16 (sym+add)@tprel@higher */ -+#define R_PPC64_TPREL16_HIGHERA 98 /* half16 (sym+add)@tprel@highera */ -+#define R_PPC64_TPREL16_HIGHEST 99 /* half16 (sym+add)@tprel@highest */ -+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16 (sym+add)@tprel@highesta */ -+#define R_PPC64_DTPREL16_DS 101 /* half16ds* (sym+add)@dtprel */ -+#define R_PPC64_DTPREL16_LO_DS 102 /* half16ds (sym+add)@dtprel@l */ -+#define R_PPC64_DTPREL16_HIGHER 103 /* half16 (sym+add)@dtprel@higher */ -+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16 (sym+add)@dtprel@highera */ -+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16 (sym+add)@dtprel@highest */ -+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16 (sym+add)@dtprel@highesta */ -+ -+/* GNU extension to support local ifunc. */ -+#define R_PPC64_JMP_IREL 247 -+#define R_PPC64_IRELATIVE 248 -+#define R_PPC64_REL16 249 /* half16 (sym+add-.) */ -+#define R_PPC64_REL16_LO 250 /* half16 (sym+add-.)@l */ -+#define R_PPC64_REL16_HI 251 /* half16 (sym+add-.)@h */ -+#define R_PPC64_REL16_HA 252 /* half16 (sym+add-.)@ha */ -+ -+/* PowerPC64 specific values for the Dyn d_tag field. */ -+#define DT_PPC64_GLINK (DT_LOPROC + 0) -+#define DT_PPC64_OPD (DT_LOPROC + 1) -+#define DT_PPC64_OPDSZ (DT_LOPROC + 2) -+#define DT_PPC64_NUM 3 -+ -+ -+/* ARM specific declarations */ -+ -+/* Processor specific flags for the ELF header e_flags field. */ -+#define EF_ARM_RELEXEC 0x01 -+#define EF_ARM_HASENTRY 0x02 -+#define EF_ARM_INTERWORK 0x04 -+#define EF_ARM_APCS_26 0x08 -+#define EF_ARM_APCS_FLOAT 0x10 -+#define EF_ARM_PIC 0x20 -+#define EF_ARM_ALIGN8 0x40 /* 8-bit structure alignment is in use */ -+#define EF_ARM_NEW_ABI 0x80 -+#define EF_ARM_OLD_ABI 0x100 -+#define EF_ARM_SOFT_FLOAT 0x200 -+#define EF_ARM_VFP_FLOAT 0x400 -+#define EF_ARM_MAVERICK_FLOAT 0x800 -+ -+ -+/* Other constants defined in the ARM ELF spec. version B-01. */ -+/* NB. These conflict with values defined above. */ -+#define EF_ARM_SYMSARESORTED 0x04 -+#define EF_ARM_DYNSYMSUSESEGIDX 0x08 -+#define EF_ARM_MAPSYMSFIRST 0x10 -+#define EF_ARM_EABIMASK 0XFF000000 -+ -+/* Constants defined in AAELF. */ -+#define EF_ARM_BE8 0x00800000 -+#define EF_ARM_LE8 0x00400000 -+ -+#define EF_ARM_EABI_VERSION(flags) ((flags) & EF_ARM_EABIMASK) -+#define EF_ARM_EABI_UNKNOWN 0x00000000 -+#define EF_ARM_EABI_VER1 0x01000000 -+#define EF_ARM_EABI_VER2 0x02000000 -+#define EF_ARM_EABI_VER3 0x03000000 -+#define EF_ARM_EABI_VER4 0x04000000 -+#define EF_ARM_EABI_VER5 0x05000000 -+ -+/* Additional symbol types for Thumb. */ -+#define STT_ARM_TFUNC STT_LOPROC /* A Thumb function. */ -+#define STT_ARM_16BIT STT_HIPROC /* A Thumb label. */ -+ -+/* ARM-specific values for sh_flags */ -+#define SHF_ARM_ENTRYSECT 0x10000000 /* Section contains an entry point */ -+#define SHF_ARM_COMDEF 0x80000000 /* Section may be multiply defined -+ in the input to a link step. */ -+ -+/* ARM-specific program header flags */ -+#define PF_ARM_SB 0x10000000 /* Segment contains the location -+ addressed by the static base. */ -+#define PF_ARM_PI 0x20000000 /* Position-independent segment. */ -+#define PF_ARM_ABS 0x40000000 /* Absolute segment. */ -+ -+/* Processor specific values for the Phdr p_type field. */ -+#define PT_ARM_EXIDX (PT_LOPROC + 1) /* ARM unwind segment. */ -+ -+/* Processor specific values for the Shdr sh_type field. */ -+#define SHT_ARM_EXIDX (SHT_LOPROC + 1) /* ARM unwind section. */ -+#define SHT_ARM_PREEMPTMAP (SHT_LOPROC + 2) /* Preemption details. */ -+#define SHT_ARM_ATTRIBUTES (SHT_LOPROC + 3) /* ARM attributes section. */ -+ -+ -+/* ARM relocs. */ -+ -+#define R_ARM_NONE 0 /* No reloc */ -+#define R_ARM_PC24 1 /* PC relative 26 bit branch */ -+#define R_ARM_ABS32 2 /* Direct 32 bit */ -+#define R_ARM_REL32 3 /* PC relative 32 bit */ -+#define R_ARM_PC13 4 -+#define R_ARM_ABS16 5 /* Direct 16 bit */ -+#define R_ARM_ABS12 6 /* Direct 12 bit */ -+#define R_ARM_THM_ABS5 7 -+#define R_ARM_ABS8 8 /* Direct 8 bit */ -+#define R_ARM_SBREL32 9 -+#define R_ARM_THM_PC22 10 -+#define R_ARM_THM_PC8 11 -+#define R_ARM_AMP_VCALL9 12 -+#define R_ARM_SWI24 13 /* Obsolete static relocation. */ -+#define R_ARM_TLS_DESC 13 /* Dynamic relocation. */ -+#define R_ARM_THM_SWI8 14 -+#define R_ARM_XPC25 15 -+#define R_ARM_THM_XPC22 16 -+#define R_ARM_TLS_DTPMOD32 17 /* ID of module containing symbol */ -+#define R_ARM_TLS_DTPOFF32 18 /* Offset in TLS block */ -+#define R_ARM_TLS_TPOFF32 19 /* Offset in static TLS block */ -+#define R_ARM_COPY 20 /* Copy symbol at runtime */ -+#define R_ARM_GLOB_DAT 21 /* Create GOT entry */ -+#define R_ARM_JUMP_SLOT 22 /* Create PLT entry */ -+#define R_ARM_RELATIVE 23 /* Adjust by program base */ -+#define R_ARM_GOTOFF 24 /* 32 bit offset to GOT */ -+#define R_ARM_GOTPC 25 /* 32 bit PC relative offset to GOT */ -+#define R_ARM_GOT32 26 /* 32 bit GOT entry */ -+#define R_ARM_PLT32 27 /* 32 bit PLT address */ -+#define R_ARM_ALU_PCREL_7_0 32 -+#define R_ARM_ALU_PCREL_15_8 33 -+#define R_ARM_ALU_PCREL_23_15 34 -+#define R_ARM_LDR_SBREL_11_0 35 -+#define R_ARM_ALU_SBREL_19_12 36 -+#define R_ARM_ALU_SBREL_27_20 37 -+#define R_ARM_TLS_GOTDESC 90 -+#define R_ARM_TLS_CALL 91 -+#define R_ARM_TLS_DESCSEQ 92 -+#define R_ARM_THM_TLS_CALL 93 -+#define R_ARM_GNU_VTENTRY 100 -+#define R_ARM_GNU_VTINHERIT 101 -+#define R_ARM_THM_PC11 102 /* thumb unconditional branch */ -+#define R_ARM_THM_PC9 103 /* thumb conditional branch */ -+#define R_ARM_TLS_GD32 104 /* PC-rel 32 bit for global dynamic -+ thread local data */ -+#define R_ARM_TLS_LDM32 105 /* PC-rel 32 bit for local dynamic -+ thread local data */ -+#define R_ARM_TLS_LDO32 106 /* 32 bit offset relative to TLS -+ block */ -+#define R_ARM_TLS_IE32 107 /* PC-rel 32 bit for GOT entry of -+ static TLS block offset */ -+#define R_ARM_TLS_LE32 108 /* 32 bit offset relative to static -+ TLS block */ -+#define R_ARM_THM_TLS_DESCSEQ 129 -+#define R_ARM_IRELATIVE 160 -+#define R_ARM_RXPC25 249 -+#define R_ARM_RSBREL32 250 -+#define R_ARM_THM_RPC22 251 -+#define R_ARM_RREL32 252 -+#define R_ARM_RABS22 253 -+#define R_ARM_RPC24 254 -+#define R_ARM_RBASE 255 -+/* Keep this the last entry. */ -+#define R_ARM_NUM 256 -+ -+/* IA-64 specific declarations. */ -+ -+/* Processor specific flags for the Ehdr e_flags field. */ -+#define EF_IA_64_MASKOS 0x0000000f /* os-specific flags */ -+#define EF_IA_64_ABI64 0x00000010 /* 64-bit ABI */ -+#define EF_IA_64_ARCH 0xff000000 /* arch. version mask */ -+ -+/* Processor specific values for the Phdr p_type field. */ -+#define PT_IA_64_ARCHEXT (PT_LOPROC + 0) /* arch extension bits */ -+#define PT_IA_64_UNWIND (PT_LOPROC + 1) /* ia64 unwind bits */ -+#define PT_IA_64_HP_OPT_ANOT (PT_LOOS + 0x12) -+#define PT_IA_64_HP_HSL_ANOT (PT_LOOS + 0x13) -+#define PT_IA_64_HP_STACK (PT_LOOS + 0x14) -+ -+/* Processor specific flags for the Phdr p_flags field. */ -+#define PF_IA_64_NORECOV 0x80000000 /* spec insns w/o recovery */ -+ -+/* Processor specific values for the Shdr sh_type field. */ -+#define SHT_IA_64_EXT (SHT_LOPROC + 0) /* extension bits */ -+#define SHT_IA_64_UNWIND (SHT_LOPROC + 1) /* unwind bits */ -+ -+/* Processor specific flags for the Shdr sh_flags field. */ -+#define SHF_IA_64_SHORT 0x10000000 /* section near gp */ -+#define SHF_IA_64_NORECOV 0x20000000 /* spec insns w/o recovery */ -+ -+/* Processor specific values for the Dyn d_tag field. */ -+#define DT_IA_64_PLT_RESERVE (DT_LOPROC + 0) -+#define DT_IA_64_NUM 1 -+ -+/* IA-64 relocations. */ -+#define R_IA64_NONE 0x00 /* none */ -+#define R_IA64_IMM14 0x21 /* symbol + addend, add imm14 */ -+#define R_IA64_IMM22 0x22 /* symbol + addend, add imm22 */ -+#define R_IA64_IMM64 0x23 /* symbol + addend, mov imm64 */ -+#define R_IA64_DIR32MSB 0x24 /* symbol + addend, data4 MSB */ -+#define R_IA64_DIR32LSB 0x25 /* symbol + addend, data4 LSB */ -+#define R_IA64_DIR64MSB 0x26 /* symbol + addend, data8 MSB */ -+#define R_IA64_DIR64LSB 0x27 /* symbol + addend, data8 LSB */ -+#define R_IA64_GPREL22 0x2a /* @gprel(sym + add), add imm22 */ -+#define R_IA64_GPREL64I 0x2b /* @gprel(sym + add), mov imm64 */ -+#define R_IA64_GPREL32MSB 0x2c /* @gprel(sym + add), data4 MSB */ -+#define R_IA64_GPREL32LSB 0x2d /* @gprel(sym + add), data4 LSB */ -+#define R_IA64_GPREL64MSB 0x2e /* @gprel(sym + add), data8 MSB */ -+#define R_IA64_GPREL64LSB 0x2f /* @gprel(sym + add), data8 LSB */ -+#define R_IA64_LTOFF22 0x32 /* @ltoff(sym + add), add imm22 */ -+#define R_IA64_LTOFF64I 0x33 /* @ltoff(sym + add), mov imm64 */ -+#define R_IA64_PLTOFF22 0x3a /* @pltoff(sym + add), add imm22 */ -+#define R_IA64_PLTOFF64I 0x3b /* @pltoff(sym + add), mov imm64 */ -+#define R_IA64_PLTOFF64MSB 0x3e /* @pltoff(sym + add), data8 MSB */ -+#define R_IA64_PLTOFF64LSB 0x3f /* @pltoff(sym + add), data8 LSB */ -+#define R_IA64_FPTR64I 0x43 /* @fptr(sym + add), mov imm64 */ -+#define R_IA64_FPTR32MSB 0x44 /* @fptr(sym + add), data4 MSB */ -+#define R_IA64_FPTR32LSB 0x45 /* @fptr(sym + add), data4 LSB */ -+#define R_IA64_FPTR64MSB 0x46 /* @fptr(sym + add), data8 MSB */ -+#define R_IA64_FPTR64LSB 0x47 /* @fptr(sym + add), data8 LSB */ -+#define R_IA64_PCREL60B 0x48 /* @pcrel(sym + add), brl */ -+#define R_IA64_PCREL21B 0x49 /* @pcrel(sym + add), ptb, call */ -+#define R_IA64_PCREL21M 0x4a /* @pcrel(sym + add), chk.s */ -+#define R_IA64_PCREL21F 0x4b /* @pcrel(sym + add), fchkf */ -+#define R_IA64_PCREL32MSB 0x4c /* @pcrel(sym + add), data4 MSB */ -+#define R_IA64_PCREL32LSB 0x4d /* @pcrel(sym + add), data4 LSB */ -+#define R_IA64_PCREL64MSB 0x4e /* @pcrel(sym + add), data8 MSB */ -+#define R_IA64_PCREL64LSB 0x4f /* @pcrel(sym + add), data8 LSB */ -+#define R_IA64_LTOFF_FPTR22 0x52 /* @ltoff(@fptr(s+a)), imm22 */ -+#define R_IA64_LTOFF_FPTR64I 0x53 /* @ltoff(@fptr(s+a)), imm64 */ -+#define R_IA64_LTOFF_FPTR32MSB 0x54 /* @ltoff(@fptr(s+a)), data4 MSB */ -+#define R_IA64_LTOFF_FPTR32LSB 0x55 /* @ltoff(@fptr(s+a)), data4 LSB */ -+#define R_IA64_LTOFF_FPTR64MSB 0x56 /* @ltoff(@fptr(s+a)), data8 MSB */ -+#define R_IA64_LTOFF_FPTR64LSB 0x57 /* @ltoff(@fptr(s+a)), data8 LSB */ -+#define R_IA64_SEGREL32MSB 0x5c /* @segrel(sym + add), data4 MSB */ -+#define R_IA64_SEGREL32LSB 0x5d /* @segrel(sym + add), data4 LSB */ -+#define R_IA64_SEGREL64MSB 0x5e /* @segrel(sym + add), data8 MSB */ -+#define R_IA64_SEGREL64LSB 0x5f /* @segrel(sym + add), data8 LSB */ -+#define R_IA64_SECREL32MSB 0x64 /* @secrel(sym + add), data4 MSB */ -+#define R_IA64_SECREL32LSB 0x65 /* @secrel(sym + add), data4 LSB */ -+#define R_IA64_SECREL64MSB 0x66 /* @secrel(sym + add), data8 MSB */ -+#define R_IA64_SECREL64LSB 0x67 /* @secrel(sym + add), data8 LSB */ -+#define R_IA64_REL32MSB 0x6c /* data 4 + REL */ -+#define R_IA64_REL32LSB 0x6d /* data 4 + REL */ -+#define R_IA64_REL64MSB 0x6e /* data 8 + REL */ -+#define R_IA64_REL64LSB 0x6f /* data 8 + REL */ -+#define R_IA64_LTV32MSB 0x74 /* symbol + addend, data4 MSB */ -+#define R_IA64_LTV32LSB 0x75 /* symbol + addend, data4 LSB */ -+#define R_IA64_LTV64MSB 0x76 /* symbol + addend, data8 MSB */ -+#define R_IA64_LTV64LSB 0x77 /* symbol + addend, data8 LSB */ -+#define R_IA64_PCREL21BI 0x79 /* @pcrel(sym + add), 21bit inst */ -+#define R_IA64_PCREL22 0x7a /* @pcrel(sym + add), 22bit inst */ -+#define R_IA64_PCREL64I 0x7b /* @pcrel(sym + add), 64bit inst */ -+#define R_IA64_IPLTMSB 0x80 /* dynamic reloc, imported PLT, MSB */ -+#define R_IA64_IPLTLSB 0x81 /* dynamic reloc, imported PLT, LSB */ -+#define R_IA64_COPY 0x84 /* copy relocation */ -+#define R_IA64_SUB 0x85 /* Addend and symbol difference */ -+#define R_IA64_LTOFF22X 0x86 /* LTOFF22, relaxable. */ -+#define R_IA64_LDXMOV 0x87 /* Use of LTOFF22X. */ -+#define R_IA64_TPREL14 0x91 /* @tprel(sym + add), imm14 */ -+#define R_IA64_TPREL22 0x92 /* @tprel(sym + add), imm22 */ -+#define R_IA64_TPREL64I 0x93 /* @tprel(sym + add), imm64 */ -+#define R_IA64_TPREL64MSB 0x96 /* @tprel(sym + add), data8 MSB */ -+#define R_IA64_TPREL64LSB 0x97 /* @tprel(sym + add), data8 LSB */ -+#define R_IA64_LTOFF_TPREL22 0x9a /* @ltoff(@tprel(s+a)), imm2 */ -+#define R_IA64_DTPMOD64MSB 0xa6 /* @dtpmod(sym + add), data8 MSB */ -+#define R_IA64_DTPMOD64LSB 0xa7 /* @dtpmod(sym + add), data8 LSB */ -+#define R_IA64_LTOFF_DTPMOD22 0xaa /* @ltoff(@dtpmod(sym + add)), imm22 */ -+#define R_IA64_DTPREL14 0xb1 /* @dtprel(sym + add), imm14 */ -+#define R_IA64_DTPREL22 0xb2 /* @dtprel(sym + add), imm22 */ -+#define R_IA64_DTPREL64I 0xb3 /* @dtprel(sym + add), imm64 */ -+#define R_IA64_DTPREL32MSB 0xb4 /* @dtprel(sym + add), data4 MSB */ -+#define R_IA64_DTPREL32LSB 0xb5 /* @dtprel(sym + add), data4 LSB */ -+#define R_IA64_DTPREL64MSB 0xb6 /* @dtprel(sym + add), data8 MSB */ -+#define R_IA64_DTPREL64LSB 0xb7 /* @dtprel(sym + add), data8 LSB */ -+#define R_IA64_LTOFF_DTPREL22 0xba /* @ltoff(@dtprel(s+a)), imm22 */ -+ -+/* SH specific declarations */ -+ -+/* Processor specific flags for the ELF header e_flags field. */ -+#define EF_SH_MACH_MASK 0x1f -+#define EF_SH_UNKNOWN 0x0 -+#define EF_SH1 0x1 -+#define EF_SH2 0x2 -+#define EF_SH3 0x3 -+#define EF_SH_DSP 0x4 -+#define EF_SH3_DSP 0x5 -+#define EF_SH4AL_DSP 0x6 -+#define EF_SH3E 0x8 -+#define EF_SH4 0x9 -+#define EF_SH2E 0xb -+#define EF_SH4A 0xc -+#define EF_SH2A 0xd -+#define EF_SH4_NOFPU 0x10 -+#define EF_SH4A_NOFPU 0x11 -+#define EF_SH4_NOMMU_NOFPU 0x12 -+#define EF_SH2A_NOFPU 0x13 -+#define EF_SH3_NOMMU 0x14 -+#define EF_SH2A_SH4_NOFPU 0x15 -+#define EF_SH2A_SH3_NOFPU 0x16 -+#define EF_SH2A_SH4 0x17 -+#define EF_SH2A_SH3E 0x18 -+ -+/* SH relocs. */ -+#define R_SH_NONE 0 -+#define R_SH_DIR32 1 -+#define R_SH_REL32 2 -+#define R_SH_DIR8WPN 3 -+#define R_SH_IND12W 4 -+#define R_SH_DIR8WPL 5 -+#define R_SH_DIR8WPZ 6 -+#define R_SH_DIR8BP 7 -+#define R_SH_DIR8W 8 -+#define R_SH_DIR8L 9 -+#define R_SH_SWITCH16 25 -+#define R_SH_SWITCH32 26 -+#define R_SH_USES 27 -+#define R_SH_COUNT 28 -+#define R_SH_ALIGN 29 -+#define R_SH_CODE 30 -+#define R_SH_DATA 31 -+#define R_SH_LABEL 32 -+#define R_SH_SWITCH8 33 -+#define R_SH_GNU_VTINHERIT 34 -+#define R_SH_GNU_VTENTRY 35 -+#define R_SH_TLS_GD_32 144 -+#define R_SH_TLS_LD_32 145 -+#define R_SH_TLS_LDO_32 146 -+#define R_SH_TLS_IE_32 147 -+#define R_SH_TLS_LE_32 148 -+#define R_SH_TLS_DTPMOD32 149 -+#define R_SH_TLS_DTPOFF32 150 -+#define R_SH_TLS_TPOFF32 151 -+#define R_SH_GOT32 160 -+#define R_SH_PLT32 161 -+#define R_SH_COPY 162 -+#define R_SH_GLOB_DAT 163 -+#define R_SH_JMP_SLOT 164 -+#define R_SH_RELATIVE 165 -+#define R_SH_GOTOFF 166 -+#define R_SH_GOTPC 167 -+/* Keep this the last entry. */ -+#define R_SH_NUM 256 -+ -+/* S/390 specific definitions. */ -+ -+/* Valid values for the e_flags field. */ -+ -+#define EF_S390_HIGH_GPRS 0x00000001 /* High GPRs kernel facility needed. */ -+ -+/* Additional s390 relocs */ -+ -+#define R_390_NONE 0 /* No reloc. */ -+#define R_390_8 1 /* Direct 8 bit. */ -+#define R_390_12 2 /* Direct 12 bit. */ -+#define R_390_16 3 /* Direct 16 bit. */ -+#define R_390_32 4 /* Direct 32 bit. */ -+#define R_390_PC32 5 /* PC relative 32 bit. */ -+#define R_390_GOT12 6 /* 12 bit GOT offset. */ -+#define R_390_GOT32 7 /* 32 bit GOT offset. */ -+#define R_390_PLT32 8 /* 32 bit PC relative PLT address. */ -+#define R_390_COPY 9 /* Copy symbol at runtime. */ -+#define R_390_GLOB_DAT 10 /* Create GOT entry. */ -+#define R_390_JMP_SLOT 11 /* Create PLT entry. */ -+#define R_390_RELATIVE 12 /* Adjust by program base. */ -+#define R_390_GOTOFF32 13 /* 32 bit offset to GOT. */ -+#define R_390_GOTPC 14 /* 32 bit PC relative offset to GOT. */ -+#define R_390_GOT16 15 /* 16 bit GOT offset. */ -+#define R_390_PC16 16 /* PC relative 16 bit. */ -+#define R_390_PC16DBL 17 /* PC relative 16 bit shifted by 1. */ -+#define R_390_PLT16DBL 18 /* 16 bit PC rel. PLT shifted by 1. */ -+#define R_390_PC32DBL 19 /* PC relative 32 bit shifted by 1. */ -+#define R_390_PLT32DBL 20 /* 32 bit PC rel. PLT shifted by 1. */ -+#define R_390_GOTPCDBL 21 /* 32 bit PC rel. GOT shifted by 1. */ -+#define R_390_64 22 /* Direct 64 bit. */ -+#define R_390_PC64 23 /* PC relative 64 bit. */ -+#define R_390_GOT64 24 /* 64 bit GOT offset. */ -+#define R_390_PLT64 25 /* 64 bit PC relative PLT address. */ -+#define R_390_GOTENT 26 /* 32 bit PC rel. to GOT entry >> 1. */ -+#define R_390_GOTOFF16 27 /* 16 bit offset to GOT. */ -+#define R_390_GOTOFF64 28 /* 64 bit offset to GOT. */ -+#define R_390_GOTPLT12 29 /* 12 bit offset to jump slot. */ -+#define R_390_GOTPLT16 30 /* 16 bit offset to jump slot. */ -+#define R_390_GOTPLT32 31 /* 32 bit offset to jump slot. */ -+#define R_390_GOTPLT64 32 /* 64 bit offset to jump slot. */ -+#define R_390_GOTPLTENT 33 /* 32 bit rel. offset to jump slot. */ -+#define R_390_PLTOFF16 34 /* 16 bit offset from GOT to PLT. */ -+#define R_390_PLTOFF32 35 /* 32 bit offset from GOT to PLT. */ -+#define R_390_PLTOFF64 36 /* 16 bit offset from GOT to PLT. */ -+#define R_390_TLS_LOAD 37 /* Tag for load insn in TLS code. */ -+#define R_390_TLS_GDCALL 38 /* Tag for function call in general -+ dynamic TLS code. */ -+#define R_390_TLS_LDCALL 39 /* Tag for function call in local -+ dynamic TLS code. */ -+#define R_390_TLS_GD32 40 /* Direct 32 bit for general dynamic -+ thread local data. */ -+#define R_390_TLS_GD64 41 /* Direct 64 bit for general dynamic -+ thread local data. */ -+#define R_390_TLS_GOTIE12 42 /* 12 bit GOT offset for static TLS -+ block offset. */ -+#define R_390_TLS_GOTIE32 43 /* 32 bit GOT offset for static TLS -+ block offset. */ -+#define R_390_TLS_GOTIE64 44 /* 64 bit GOT offset for static TLS -+ block offset. */ -+#define R_390_TLS_LDM32 45 /* Direct 32 bit for local dynamic -+ thread local data in LE code. */ -+#define R_390_TLS_LDM64 46 /* Direct 64 bit for local dynamic -+ thread local data in LE code. */ -+#define R_390_TLS_IE32 47 /* 32 bit address of GOT entry for -+ negated static TLS block offset. */ -+#define R_390_TLS_IE64 48 /* 64 bit address of GOT entry for -+ negated static TLS block offset. */ -+#define R_390_TLS_IEENT 49 /* 32 bit rel. offset to GOT entry for -+ negated static TLS block offset. */ -+#define R_390_TLS_LE32 50 /* 32 bit negated offset relative to -+ static TLS block. */ -+#define R_390_TLS_LE64 51 /* 64 bit negated offset relative to -+ static TLS block. */ -+#define R_390_TLS_LDO32 52 /* 32 bit offset relative to TLS -+ block. */ -+#define R_390_TLS_LDO64 53 /* 64 bit offset relative to TLS -+ block. */ -+#define R_390_TLS_DTPMOD 54 /* ID of module containing symbol. */ -+#define R_390_TLS_DTPOFF 55 /* Offset in TLS block. */ -+#define R_390_TLS_TPOFF 56 /* Negated offset in static TLS -+ block. */ -+#define R_390_20 57 /* Direct 20 bit. */ -+#define R_390_GOT20 58 /* 20 bit GOT offset. */ -+#define R_390_GOTPLT20 59 /* 20 bit offset to jump slot. */ -+#define R_390_TLS_GOTIE20 60 /* 20 bit GOT offset for static TLS -+ block offset. */ -+#define R_390_IRELATIVE 61 /* STT_GNU_IFUNC relocation. */ -+/* Keep this the last entry. */ -+#define R_390_NUM 62 -+ -+ -+/* CRIS relocations. */ -+#define R_CRIS_NONE 0 -+#define R_CRIS_8 1 -+#define R_CRIS_16 2 -+#define R_CRIS_32 3 -+#define R_CRIS_8_PCREL 4 -+#define R_CRIS_16_PCREL 5 -+#define R_CRIS_32_PCREL 6 -+#define R_CRIS_GNU_VTINHERIT 7 -+#define R_CRIS_GNU_VTENTRY 8 -+#define R_CRIS_COPY 9 -+#define R_CRIS_GLOB_DAT 10 -+#define R_CRIS_JUMP_SLOT 11 -+#define R_CRIS_RELATIVE 12 -+#define R_CRIS_16_GOT 13 -+#define R_CRIS_32_GOT 14 -+#define R_CRIS_16_GOTPLT 15 -+#define R_CRIS_32_GOTPLT 16 -+#define R_CRIS_32_GOTREL 17 -+#define R_CRIS_32_PLT_GOTREL 18 -+#define R_CRIS_32_PLT_PCREL 19 -+ -+#define R_CRIS_NUM 20 -+ -+ -+/* AMD x86-64 relocations. */ -+#define R_X86_64_NONE 0 /* No reloc */ -+#define R_X86_64_64 1 /* Direct 64 bit */ -+#define R_X86_64_PC32 2 /* PC relative 32 bit signed */ -+#define R_X86_64_GOT32 3 /* 32 bit GOT entry */ -+#define R_X86_64_PLT32 4 /* 32 bit PLT address */ -+#define R_X86_64_COPY 5 /* Copy symbol at runtime */ -+#define R_X86_64_GLOB_DAT 6 /* Create GOT entry */ -+#define R_X86_64_JUMP_SLOT 7 /* Create PLT entry */ -+#define R_X86_64_RELATIVE 8 /* Adjust by program base */ -+#define R_X86_64_GOTPCREL 9 /* 32 bit signed PC relative -+ offset to GOT */ -+#define R_X86_64_32 10 /* Direct 32 bit zero extended */ -+#define R_X86_64_32S 11 /* Direct 32 bit sign extended */ -+#define R_X86_64_16 12 /* Direct 16 bit zero extended */ -+#define R_X86_64_PC16 13 /* 16 bit sign extended pc relative */ -+#define R_X86_64_8 14 /* Direct 8 bit sign extended */ -+#define R_X86_64_PC8 15 /* 8 bit sign extended pc relative */ -+#define R_X86_64_DTPMOD64 16 /* ID of module containing symbol */ -+#define R_X86_64_DTPOFF64 17 /* Offset in module's TLS block */ -+#define R_X86_64_TPOFF64 18 /* Offset in initial TLS block */ -+#define R_X86_64_TLSGD 19 /* 32 bit signed PC relative offset -+ to two GOT entries for GD symbol */ -+#define R_X86_64_TLSLD 20 /* 32 bit signed PC relative offset -+ to two GOT entries for LD symbol */ -+#define R_X86_64_DTPOFF32 21 /* Offset in TLS block */ -+#define R_X86_64_GOTTPOFF 22 /* 32 bit signed PC relative offset -+ to GOT entry for IE symbol */ -+#define R_X86_64_TPOFF32 23 /* Offset in initial TLS block */ -+#define R_X86_64_PC64 24 /* PC relative 64 bit */ -+#define R_X86_64_GOTOFF64 25 /* 64 bit offset to GOT */ -+#define R_X86_64_GOTPC32 26 /* 32 bit signed pc relative -+ offset to GOT */ -+#define R_X86_64_GOT64 27 /* 64-bit GOT entry offset */ -+#define R_X86_64_GOTPCREL64 28 /* 64-bit PC relative offset -+ to GOT entry */ -+#define R_X86_64_GOTPC64 29 /* 64-bit PC relative offset to GOT */ -+#define R_X86_64_GOTPLT64 30 /* like GOT64, says PLT entry needed */ -+#define R_X86_64_PLTOFF64 31 /* 64-bit GOT relative offset -+ to PLT entry */ -+#define R_X86_64_SIZE32 32 /* Size of symbol plus 32-bit addend */ -+#define R_X86_64_SIZE64 33 /* Size of symbol plus 64-bit addend */ -+#define R_X86_64_GOTPC32_TLSDESC 34 /* GOT offset for TLS descriptor. */ -+#define R_X86_64_TLSDESC_CALL 35 /* Marker for call through TLS -+ descriptor. */ -+#define R_X86_64_TLSDESC 36 /* TLS descriptor. */ -+#define R_X86_64_IRELATIVE 37 /* Adjust indirectly by program base */ -+#define R_X86_64_RELATIVE64 38 /* 64-bit adjust by program base */ -+ -+#define R_X86_64_NUM 39 -+ -+ -+/* AM33 relocations. */ -+#define R_MN10300_NONE 0 /* No reloc. */ -+#define R_MN10300_32 1 /* Direct 32 bit. */ -+#define R_MN10300_16 2 /* Direct 16 bit. */ -+#define R_MN10300_8 3 /* Direct 8 bit. */ -+#define R_MN10300_PCREL32 4 /* PC-relative 32-bit. */ -+#define R_MN10300_PCREL16 5 /* PC-relative 16-bit signed. */ -+#define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */ -+#define R_MN10300_GNU_VTINHERIT 7 /* Ancient C++ vtable garbage... */ -+#define R_MN10300_GNU_VTENTRY 8 /* ... collection annotation. */ -+#define R_MN10300_24 9 /* Direct 24 bit. */ -+#define R_MN10300_GOTPC32 10 /* 32-bit PCrel offset to GOT. */ -+#define R_MN10300_GOTPC16 11 /* 16-bit PCrel offset to GOT. */ -+#define R_MN10300_GOTOFF32 12 /* 32-bit offset from GOT. */ -+#define R_MN10300_GOTOFF24 13 /* 24-bit offset from GOT. */ -+#define R_MN10300_GOTOFF16 14 /* 16-bit offset from GOT. */ -+#define R_MN10300_PLT32 15 /* 32-bit PCrel to PLT entry. */ -+#define R_MN10300_PLT16 16 /* 16-bit PCrel to PLT entry. */ -+#define R_MN10300_GOT32 17 /* 32-bit offset to GOT entry. */ -+#define R_MN10300_GOT24 18 /* 24-bit offset to GOT entry. */ -+#define R_MN10300_GOT16 19 /* 16-bit offset to GOT entry. */ -+#define R_MN10300_COPY 20 /* Copy symbol at runtime. */ -+#define R_MN10300_GLOB_DAT 21 /* Create GOT entry. */ -+#define R_MN10300_JMP_SLOT 22 /* Create PLT entry. */ -+#define R_MN10300_RELATIVE 23 /* Adjust by program base. */ -+ -+#define R_MN10300_NUM 24 -+ -+ -+/* M32R relocs. */ -+#define R_M32R_NONE 0 /* No reloc. */ -+#define R_M32R_16 1 /* Direct 16 bit. */ -+#define R_M32R_32 2 /* Direct 32 bit. */ -+#define R_M32R_24 3 /* Direct 24 bit. */ -+#define R_M32R_10_PCREL 4 /* PC relative 10 bit shifted. */ -+#define R_M32R_18_PCREL 5 /* PC relative 18 bit shifted. */ -+#define R_M32R_26_PCREL 6 /* PC relative 26 bit shifted. */ -+#define R_M32R_HI16_ULO 7 /* High 16 bit with unsigned low. */ -+#define R_M32R_HI16_SLO 8 /* High 16 bit with signed low. */ -+#define R_M32R_LO16 9 /* Low 16 bit. */ -+#define R_M32R_SDA16 10 /* 16 bit offset in SDA. */ -+#define R_M32R_GNU_VTINHERIT 11 -+#define R_M32R_GNU_VTENTRY 12 -+/* M32R relocs use SHT_RELA. */ -+#define R_M32R_16_RELA 33 /* Direct 16 bit. */ -+#define R_M32R_32_RELA 34 /* Direct 32 bit. */ -+#define R_M32R_24_RELA 35 /* Direct 24 bit. */ -+#define R_M32R_10_PCREL_RELA 36 /* PC relative 10 bit shifted. */ -+#define R_M32R_18_PCREL_RELA 37 /* PC relative 18 bit shifted. */ -+#define R_M32R_26_PCREL_RELA 38 /* PC relative 26 bit shifted. */ -+#define R_M32R_HI16_ULO_RELA 39 /* High 16 bit with unsigned low */ -+#define R_M32R_HI16_SLO_RELA 40 /* High 16 bit with signed low */ -+#define R_M32R_LO16_RELA 41 /* Low 16 bit */ -+#define R_M32R_SDA16_RELA 42 /* 16 bit offset in SDA */ -+#define R_M32R_RELA_GNU_VTINHERIT 43 -+#define R_M32R_RELA_GNU_VTENTRY 44 -+#define R_M32R_REL32 45 /* PC relative 32 bit. */ -+ -+#define R_M32R_GOT24 48 /* 24 bit GOT entry */ -+#define R_M32R_26_PLTREL 49 /* 26 bit PC relative to PLT shifted */ -+#define R_M32R_COPY 50 /* Copy symbol at runtime */ -+#define R_M32R_GLOB_DAT 51 /* Create GOT entry */ -+#define R_M32R_JMP_SLOT 52 /* Create PLT entry */ -+#define R_M32R_RELATIVE 53 /* Adjust by program base */ -+#define R_M32R_GOTOFF 54 /* 24 bit offset to GOT */ -+#define R_M32R_GOTPC24 55 /* 24 bit PC relative offset to GOT */ -+#define R_M32R_GOT16_HI_ULO 56 /* High 16 bit GOT entry with unsigned -+ low */ -+#define R_M32R_GOT16_HI_SLO 57 /* High 16 bit GOT entry with signed -+ low */ -+#define R_M32R_GOT16_LO 58 /* Low 16 bit GOT entry */ -+#define R_M32R_GOTPC_HI_ULO 59 /* High 16 bit PC relative offset to -+ GOT with unsigned low */ -+#define R_M32R_GOTPC_HI_SLO 60 /* High 16 bit PC relative offset to -+ GOT with signed low */ -+#define R_M32R_GOTPC_LO 61 /* Low 16 bit PC relative offset to -+ GOT */ -+#define R_M32R_GOTOFF_HI_ULO 62 /* High 16 bit offset to GOT -+ with unsigned low */ -+#define R_M32R_GOTOFF_HI_SLO 63 /* High 16 bit offset to GOT -+ with signed low */ -+#define R_M32R_GOTOFF_LO 64 /* Low 16 bit offset to GOT */ -+#define R_M32R_NUM 256 /* Keep this the last entry. */ -+ -+ -+/* TILEPro relocations. */ -+#define R_TILEPRO_NONE 0 /* No reloc */ -+#define R_TILEPRO_32 1 /* Direct 32 bit */ -+#define R_TILEPRO_16 2 /* Direct 16 bit */ -+#define R_TILEPRO_8 3 /* Direct 8 bit */ -+#define R_TILEPRO_32_PCREL 4 /* PC relative 32 bit */ -+#define R_TILEPRO_16_PCREL 5 /* PC relative 16 bit */ -+#define R_TILEPRO_8_PCREL 6 /* PC relative 8 bit */ -+#define R_TILEPRO_LO16 7 /* Low 16 bit */ -+#define R_TILEPRO_HI16 8 /* High 16 bit */ -+#define R_TILEPRO_HA16 9 /* High 16 bit, adjusted */ -+#define R_TILEPRO_COPY 10 /* Copy relocation */ -+#define R_TILEPRO_GLOB_DAT 11 /* Create GOT entry */ -+#define R_TILEPRO_JMP_SLOT 12 /* Create PLT entry */ -+#define R_TILEPRO_RELATIVE 13 /* Adjust by program base */ -+#define R_TILEPRO_BROFF_X1 14 /* X1 pipe branch offset */ -+#define R_TILEPRO_JOFFLONG_X1 15 /* X1 pipe jump offset */ -+#define R_TILEPRO_JOFFLONG_X1_PLT 16 /* X1 pipe jump offset to PLT */ -+#define R_TILEPRO_IMM8_X0 17 /* X0 pipe 8-bit */ -+#define R_TILEPRO_IMM8_Y0 18 /* Y0 pipe 8-bit */ -+#define R_TILEPRO_IMM8_X1 19 /* X1 pipe 8-bit */ -+#define R_TILEPRO_IMM8_Y1 20 /* Y1 pipe 8-bit */ -+#define R_TILEPRO_MT_IMM15_X1 21 /* X1 pipe mtspr */ -+#define R_TILEPRO_MF_IMM15_X1 22 /* X1 pipe mfspr */ -+#define R_TILEPRO_IMM16_X0 23 /* X0 pipe 16-bit */ -+#define R_TILEPRO_IMM16_X1 24 /* X1 pipe 16-bit */ -+#define R_TILEPRO_IMM16_X0_LO 25 /* X0 pipe low 16-bit */ -+#define R_TILEPRO_IMM16_X1_LO 26 /* X1 pipe low 16-bit */ -+#define R_TILEPRO_IMM16_X0_HI 27 /* X0 pipe high 16-bit */ -+#define R_TILEPRO_IMM16_X1_HI 28 /* X1 pipe high 16-bit */ -+#define R_TILEPRO_IMM16_X0_HA 29 /* X0 pipe high 16-bit, adjusted */ -+#define R_TILEPRO_IMM16_X1_HA 30 /* X1 pipe high 16-bit, adjusted */ -+#define R_TILEPRO_IMM16_X0_PCREL 31 /* X0 pipe PC relative 16 bit */ -+#define R_TILEPRO_IMM16_X1_PCREL 32 /* X1 pipe PC relative 16 bit */ -+#define R_TILEPRO_IMM16_X0_LO_PCREL 33 /* X0 pipe PC relative low 16 bit */ -+#define R_TILEPRO_IMM16_X1_LO_PCREL 34 /* X1 pipe PC relative low 16 bit */ -+#define R_TILEPRO_IMM16_X0_HI_PCREL 35 /* X0 pipe PC relative high 16 bit */ -+#define R_TILEPRO_IMM16_X1_HI_PCREL 36 /* X1 pipe PC relative high 16 bit */ -+#define R_TILEPRO_IMM16_X0_HA_PCREL 37 /* X0 pipe PC relative ha() 16 bit */ -+#define R_TILEPRO_IMM16_X1_HA_PCREL 38 /* X1 pipe PC relative ha() 16 bit */ -+#define R_TILEPRO_IMM16_X0_GOT 39 /* X0 pipe 16-bit GOT offset */ -+#define R_TILEPRO_IMM16_X1_GOT 40 /* X1 pipe 16-bit GOT offset */ -+#define R_TILEPRO_IMM16_X0_GOT_LO 41 /* X0 pipe low 16-bit GOT offset */ -+#define R_TILEPRO_IMM16_X1_GOT_LO 42 /* X1 pipe low 16-bit GOT offset */ -+#define R_TILEPRO_IMM16_X0_GOT_HI 43 /* X0 pipe high 16-bit GOT offset */ -+#define R_TILEPRO_IMM16_X1_GOT_HI 44 /* X1 pipe high 16-bit GOT offset */ -+#define R_TILEPRO_IMM16_X0_GOT_HA 45 /* X0 pipe ha() 16-bit GOT offset */ -+#define R_TILEPRO_IMM16_X1_GOT_HA 46 /* X1 pipe ha() 16-bit GOT offset */ -+#define R_TILEPRO_MMSTART_X0 47 /* X0 pipe mm "start" */ -+#define R_TILEPRO_MMEND_X0 48 /* X0 pipe mm "end" */ -+#define R_TILEPRO_MMSTART_X1 49 /* X1 pipe mm "start" */ -+#define R_TILEPRO_MMEND_X1 50 /* X1 pipe mm "end" */ -+#define R_TILEPRO_SHAMT_X0 51 /* X0 pipe shift amount */ -+#define R_TILEPRO_SHAMT_X1 52 /* X1 pipe shift amount */ -+#define R_TILEPRO_SHAMT_Y0 53 /* Y0 pipe shift amount */ -+#define R_TILEPRO_SHAMT_Y1 54 /* Y1 pipe shift amount */ -+#define R_TILEPRO_DEST_IMM8_X1 55 /* X1 pipe destination 8-bit */ -+/* Relocs 56-59 are currently not defined. */ -+#define R_TILEPRO_TLS_GD_CALL 60 /* "jal" for TLS GD */ -+#define R_TILEPRO_IMM8_X0_TLS_GD_ADD 61 /* X0 pipe "addi" for TLS GD */ -+#define R_TILEPRO_IMM8_X1_TLS_GD_ADD 62 /* X1 pipe "addi" for TLS GD */ -+#define R_TILEPRO_IMM8_Y0_TLS_GD_ADD 63 /* Y0 pipe "addi" for TLS GD */ -+#define R_TILEPRO_IMM8_Y1_TLS_GD_ADD 64 /* Y1 pipe "addi" for TLS GD */ -+#define R_TILEPRO_TLS_IE_LOAD 65 /* "lw_tls" for TLS IE */ -+#define R_TILEPRO_IMM16_X0_TLS_GD 66 /* X0 pipe 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X1_TLS_GD 67 /* X1 pipe 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X0_TLS_GD_LO 68 /* X0 pipe low 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X1_TLS_GD_LO 69 /* X1 pipe low 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X0_TLS_GD_HI 70 /* X0 pipe high 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X1_TLS_GD_HI 71 /* X1 pipe high 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X0_TLS_GD_HA 72 /* X0 pipe ha() 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X1_TLS_GD_HA 73 /* X1 pipe ha() 16-bit TLS GD offset */ -+#define R_TILEPRO_IMM16_X0_TLS_IE 74 /* X0 pipe 16-bit TLS IE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_IE 75 /* X1 pipe 16-bit TLS IE offset */ -+#define R_TILEPRO_IMM16_X0_TLS_IE_LO 76 /* X0 pipe low 16-bit TLS IE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_IE_LO 77 /* X1 pipe low 16-bit TLS IE offset */ -+#define R_TILEPRO_IMM16_X0_TLS_IE_HI 78 /* X0 pipe high 16-bit TLS IE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_IE_HI 79 /* X1 pipe high 16-bit TLS IE offset */ -+#define R_TILEPRO_IMM16_X0_TLS_IE_HA 80 /* X0 pipe ha() 16-bit TLS IE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_IE_HA 81 /* X1 pipe ha() 16-bit TLS IE offset */ -+#define R_TILEPRO_TLS_DTPMOD32 82 /* ID of module containing symbol */ -+#define R_TILEPRO_TLS_DTPOFF32 83 /* Offset in TLS block */ -+#define R_TILEPRO_TLS_TPOFF32 84 /* Offset in static TLS block */ -+#define R_TILEPRO_IMM16_X0_TLS_LE 85 /* X0 pipe 16-bit TLS LE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_LE 86 /* X1 pipe 16-bit TLS LE offset */ -+#define R_TILEPRO_IMM16_X0_TLS_LE_LO 87 /* X0 pipe low 16-bit TLS LE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_LE_LO 88 /* X1 pipe low 16-bit TLS LE offset */ -+#define R_TILEPRO_IMM16_X0_TLS_LE_HI 89 /* X0 pipe high 16-bit TLS LE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_LE_HI 90 /* X1 pipe high 16-bit TLS LE offset */ -+#define R_TILEPRO_IMM16_X0_TLS_LE_HA 91 /* X0 pipe ha() 16-bit TLS LE offset */ -+#define R_TILEPRO_IMM16_X1_TLS_LE_HA 92 /* X1 pipe ha() 16-bit TLS LE offset */ -+ -+#define R_TILEPRO_GNU_VTINHERIT 128 /* GNU C++ vtable hierarchy */ -+#define R_TILEPRO_GNU_VTENTRY 129 /* GNU C++ vtable member usage */ -+ -+#define R_TILEPRO_NUM 130 -+ -+ -+/* TILE-Gx relocations. */ -+#define R_TILEGX_NONE 0 /* No reloc */ -+#define R_TILEGX_64 1 /* Direct 64 bit */ -+#define R_TILEGX_32 2 /* Direct 32 bit */ -+#define R_TILEGX_16 3 /* Direct 16 bit */ -+#define R_TILEGX_8 4 /* Direct 8 bit */ -+#define R_TILEGX_64_PCREL 5 /* PC relative 64 bit */ -+#define R_TILEGX_32_PCREL 6 /* PC relative 32 bit */ -+#define R_TILEGX_16_PCREL 7 /* PC relative 16 bit */ -+#define R_TILEGX_8_PCREL 8 /* PC relative 8 bit */ -+#define R_TILEGX_HW0 9 /* hword 0 16-bit */ -+#define R_TILEGX_HW1 10 /* hword 1 16-bit */ -+#define R_TILEGX_HW2 11 /* hword 2 16-bit */ -+#define R_TILEGX_HW3 12 /* hword 3 16-bit */ -+#define R_TILEGX_HW0_LAST 13 /* last hword 0 16-bit */ -+#define R_TILEGX_HW1_LAST 14 /* last hword 1 16-bit */ -+#define R_TILEGX_HW2_LAST 15 /* last hword 2 16-bit */ -+#define R_TILEGX_COPY 16 /* Copy relocation */ -+#define R_TILEGX_GLOB_DAT 17 /* Create GOT entry */ -+#define R_TILEGX_JMP_SLOT 18 /* Create PLT entry */ -+#define R_TILEGX_RELATIVE 19 /* Adjust by program base */ -+#define R_TILEGX_BROFF_X1 20 /* X1 pipe branch offset */ -+#define R_TILEGX_JUMPOFF_X1 21 /* X1 pipe jump offset */ -+#define R_TILEGX_JUMPOFF_X1_PLT 22 /* X1 pipe jump offset to PLT */ -+#define R_TILEGX_IMM8_X0 23 /* X0 pipe 8-bit */ -+#define R_TILEGX_IMM8_Y0 24 /* Y0 pipe 8-bit */ -+#define R_TILEGX_IMM8_X1 25 /* X1 pipe 8-bit */ -+#define R_TILEGX_IMM8_Y1 26 /* Y1 pipe 8-bit */ -+#define R_TILEGX_DEST_IMM8_X1 27 /* X1 pipe destination 8-bit */ -+#define R_TILEGX_MT_IMM14_X1 28 /* X1 pipe mtspr */ -+#define R_TILEGX_MF_IMM14_X1 29 /* X1 pipe mfspr */ -+#define R_TILEGX_MMSTART_X0 30 /* X0 pipe mm "start" */ -+#define R_TILEGX_MMEND_X0 31 /* X0 pipe mm "end" */ -+#define R_TILEGX_SHAMT_X0 32 /* X0 pipe shift amount */ -+#define R_TILEGX_SHAMT_X1 33 /* X1 pipe shift amount */ -+#define R_TILEGX_SHAMT_Y0 34 /* Y0 pipe shift amount */ -+#define R_TILEGX_SHAMT_Y1 35 /* Y1 pipe shift amount */ -+#define R_TILEGX_IMM16_X0_HW0 36 /* X0 pipe hword 0 */ -+#define R_TILEGX_IMM16_X1_HW0 37 /* X1 pipe hword 0 */ -+#define R_TILEGX_IMM16_X0_HW1 38 /* X0 pipe hword 1 */ -+#define R_TILEGX_IMM16_X1_HW1 39 /* X1 pipe hword 1 */ -+#define R_TILEGX_IMM16_X0_HW2 40 /* X0 pipe hword 2 */ -+#define R_TILEGX_IMM16_X1_HW2 41 /* X1 pipe hword 2 */ -+#define R_TILEGX_IMM16_X0_HW3 42 /* X0 pipe hword 3 */ -+#define R_TILEGX_IMM16_X1_HW3 43 /* X1 pipe hword 3 */ -+#define R_TILEGX_IMM16_X0_HW0_LAST 44 /* X0 pipe last hword 0 */ -+#define R_TILEGX_IMM16_X1_HW0_LAST 45 /* X1 pipe last hword 0 */ -+#define R_TILEGX_IMM16_X0_HW1_LAST 46 /* X0 pipe last hword 1 */ -+#define R_TILEGX_IMM16_X1_HW1_LAST 47 /* X1 pipe last hword 1 */ -+#define R_TILEGX_IMM16_X0_HW2_LAST 48 /* X0 pipe last hword 2 */ -+#define R_TILEGX_IMM16_X1_HW2_LAST 49 /* X1 pipe last hword 2 */ -+#define R_TILEGX_IMM16_X0_HW0_PCREL 50 /* X0 pipe PC relative hword 0 */ -+#define R_TILEGX_IMM16_X1_HW0_PCREL 51 /* X1 pipe PC relative hword 0 */ -+#define R_TILEGX_IMM16_X0_HW1_PCREL 52 /* X0 pipe PC relative hword 1 */ -+#define R_TILEGX_IMM16_X1_HW1_PCREL 53 /* X1 pipe PC relative hword 1 */ -+#define R_TILEGX_IMM16_X0_HW2_PCREL 54 /* X0 pipe PC relative hword 2 */ -+#define R_TILEGX_IMM16_X1_HW2_PCREL 55 /* X1 pipe PC relative hword 2 */ -+#define R_TILEGX_IMM16_X0_HW3_PCREL 56 /* X0 pipe PC relative hword 3 */ -+#define R_TILEGX_IMM16_X1_HW3_PCREL 57 /* X1 pipe PC relative hword 3 */ -+#define R_TILEGX_IMM16_X0_HW0_LAST_PCREL 58 /* X0 pipe PC-rel last hword 0 */ -+#define R_TILEGX_IMM16_X1_HW0_LAST_PCREL 59 /* X1 pipe PC-rel last hword 0 */ -+#define R_TILEGX_IMM16_X0_HW1_LAST_PCREL 60 /* X0 pipe PC-rel last hword 1 */ -+#define R_TILEGX_IMM16_X1_HW1_LAST_PCREL 61 /* X1 pipe PC-rel last hword 1 */ -+#define R_TILEGX_IMM16_X0_HW2_LAST_PCREL 62 /* X0 pipe PC-rel last hword 2 */ -+#define R_TILEGX_IMM16_X1_HW2_LAST_PCREL 63 /* X1 pipe PC-rel last hword 2 */ -+#define R_TILEGX_IMM16_X0_HW0_GOT 64 /* X0 pipe hword 0 GOT offset */ -+#define R_TILEGX_IMM16_X1_HW0_GOT 65 /* X1 pipe hword 0 GOT offset */ -+/* Relocs 66-71 are currently not defined. */ -+#define R_TILEGX_IMM16_X0_HW0_LAST_GOT 72 /* X0 pipe last hword 0 GOT offset */ -+#define R_TILEGX_IMM16_X1_HW0_LAST_GOT 73 /* X1 pipe last hword 0 GOT offset */ -+#define R_TILEGX_IMM16_X0_HW1_LAST_GOT 74 /* X0 pipe last hword 1 GOT offset */ -+#define R_TILEGX_IMM16_X1_HW1_LAST_GOT 75 /* X1 pipe last hword 1 GOT offset */ -+/* Relocs 76-77 are currently not defined. */ -+#define R_TILEGX_IMM16_X0_HW0_TLS_GD 78 /* X0 pipe hword 0 TLS GD offset */ -+#define R_TILEGX_IMM16_X1_HW0_TLS_GD 79 /* X1 pipe hword 0 TLS GD offset */ -+#define R_TILEGX_IMM16_X0_HW0_TLS_LE 80 /* X0 pipe hword 0 TLS LE offset */ -+#define R_TILEGX_IMM16_X1_HW0_TLS_LE 81 /* X1 pipe hword 0 TLS LE offset */ -+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_LE 82 /* X0 pipe last hword 0 LE off */ -+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_LE 83 /* X1 pipe last hword 0 LE off */ -+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_LE 84 /* X0 pipe last hword 1 LE off */ -+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_LE 85 /* X1 pipe last hword 1 LE off */ -+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_GD 86 /* X0 pipe last hword 0 GD off */ -+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_GD 87 /* X1 pipe last hword 0 GD off */ -+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_GD 88 /* X0 pipe last hword 1 GD off */ -+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_GD 89 /* X1 pipe last hword 1 GD off */ -+/* Relocs 90-91 are currently not defined. */ -+#define R_TILEGX_IMM16_X0_HW0_TLS_IE 92 /* X0 pipe hword 0 TLS IE offset */ -+#define R_TILEGX_IMM16_X1_HW0_TLS_IE 93 /* X1 pipe hword 0 TLS IE offset */ -+/* Relocs 94-99 are currently not defined. */ -+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_IE 100 /* X0 pipe last hword 0 IE off */ -+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_IE 101 /* X1 pipe last hword 0 IE off */ -+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_IE 102 /* X0 pipe last hword 1 IE off */ -+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_IE 103 /* X1 pipe last hword 1 IE off */ -+/* Relocs 104-105 are currently not defined. */ -+#define R_TILEGX_TLS_DTPMOD64 106 /* 64-bit ID of symbol's module */ -+#define R_TILEGX_TLS_DTPOFF64 107 /* 64-bit offset in TLS block */ -+#define R_TILEGX_TLS_TPOFF64 108 /* 64-bit offset in static TLS block */ -+#define R_TILEGX_TLS_DTPMOD32 109 /* 32-bit ID of symbol's module */ -+#define R_TILEGX_TLS_DTPOFF32 110 /* 32-bit offset in TLS block */ -+#define R_TILEGX_TLS_TPOFF32 111 /* 32-bit offset in static TLS block */ -+#define R_TILEGX_TLS_GD_CALL 112 /* "jal" for TLS GD */ -+#define R_TILEGX_IMM8_X0_TLS_GD_ADD 113 /* X0 pipe "addi" for TLS GD */ -+#define R_TILEGX_IMM8_X1_TLS_GD_ADD 114 /* X1 pipe "addi" for TLS GD */ -+#define R_TILEGX_IMM8_Y0_TLS_GD_ADD 115 /* Y0 pipe "addi" for TLS GD */ -+#define R_TILEGX_IMM8_Y1_TLS_GD_ADD 116 /* Y1 pipe "addi" for TLS GD */ -+#define R_TILEGX_TLS_IE_LOAD 117 /* "ld_tls" for TLS IE */ -+#define R_TILEGX_IMM8_X0_TLS_ADD 118 /* X0 pipe "addi" for TLS GD/IE */ -+#define R_TILEGX_IMM8_X1_TLS_ADD 119 /* X1 pipe "addi" for TLS GD/IE */ -+#define R_TILEGX_IMM8_Y0_TLS_ADD 120 /* Y0 pipe "addi" for TLS GD/IE */ -+#define R_TILEGX_IMM8_Y1_TLS_ADD 121 /* Y1 pipe "addi" for TLS GD/IE */ -+ -+#define R_TILEGX_GNU_VTINHERIT 128 /* GNU C++ vtable hierarchy */ -+#define R_TILEGX_GNU_VTENTRY 129 /* GNU C++ vtable member usage */ -+ -+#define R_TILEGX_NUM 130 -+ -+#endif /* elf.h */ diff --git a/target/linux/generic/patches-3.3/211-stddef_include.patch b/target/linux/generic/patches-3.3/211-stddef_include.patch deleted file mode 100644 index 7fe248d8d3..0000000000 --- a/target/linux/generic/patches-3.3/211-stddef_include.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- a/include/linux/stddef.h -+++ b/include/linux/stddef.h -@@ -16,6 +16,7 @@ enum { - false = 0, - true = 1 - }; -+#endif /* __KERNEL__ */ - - #undef offsetof - #ifdef __compiler_offsetof -@@ -23,6 +24,5 @@ enum { - #else - #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) - #endif --#endif /* __KERNEL__ */ - - #endif diff --git a/target/linux/generic/patches-3.3/212-x86_reloc_portability.patch b/target/linux/generic/patches-3.3/212-x86_reloc_portability.patch deleted file mode 100644 index d0c8106a60..0000000000 --- a/target/linux/generic/patches-3.3/212-x86_reloc_portability.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/x86/tools/relocs.c -+++ b/arch/x86/tools/relocs.c -@@ -10,7 +10,18 @@ - #define USE_BSD - #include - #include --#include -+ -+static inline void __put_unaligned_le16(uint16_t val, uint8_t *p) -+{ -+ *p++ = val; -+ *p++ = val >> 8; -+} -+ -+static inline void put_unaligned_le32(uint32_t val, uint8_t *p) -+{ -+ __put_unaligned_le16(val >> 16, p + 2); -+ __put_unaligned_le16(val, p); -+} - - static void die(char *fmt, ...); - diff --git a/target/linux/generic/patches-3.3/220-module_exports.patch b/target/linux/generic/patches-3.3/220-module_exports.patch deleted file mode 100644 index 5b87c1a3e3..0000000000 --- a/target/linux/generic/patches-3.3/220-module_exports.patch +++ /dev/null @@ -1,91 +0,0 @@ ---- a/include/asm-generic/vmlinux.lds.h -+++ b/include/asm-generic/vmlinux.lds.h -@@ -52,6 +52,18 @@ - #define LOAD_OFFSET 0 - #endif - -+#ifndef SYMTAB_KEEP_STR -+#define SYMTAB_KEEP *(SORT(___ksymtab+*)) -+#define SYMTAB_KEEP_GPL *(SORT(___ksymtab_gpl+*)) -+#define SYMTAB_KEEP_STR *(__ksymtab_strings+*) -+#endif -+ -+#ifndef SYMTAB_DISCARD -+#define SYMTAB_DISCARD -+#define SYMTAB_DISCARD_GPL -+#define SYMTAB_DISCARD_STR -+#endif -+ - #ifndef SYMBOL_PREFIX - #define VMLINUX_SYMBOL(sym) sym - #else -@@ -275,14 +287,14 @@ - /* Kernel symbol table: Normal symbols */ \ - __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___ksymtab) = .; \ -- *(SORT(___ksymtab+*)) \ -+ SYMTAB_KEEP \ - VMLINUX_SYMBOL(__stop___ksymtab) = .; \ - } \ - \ - /* Kernel symbol table: GPL-only symbols */ \ - __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \ - VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \ -- *(SORT(___ksymtab_gpl+*)) \ -+ SYMTAB_KEEP_GPL \ - VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \ - } \ - \ -@@ -344,7 +356,7 @@ - \ - /* Kernel symbol table: strings */ \ - __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \ -- *(__ksymtab_strings) \ -+ SYMTAB_KEEP_STR \ - } \ - \ - /* __*init sections */ \ -@@ -676,6 +688,9 @@ - EXIT_TEXT \ - EXIT_DATA \ - EXIT_CALL \ -+ SYMTAB_DISCARD \ -+ SYMTAB_DISCARD_GPL \ -+ SYMTAB_DISCARD_STR \ - *(.discard) \ - *(.discard.*) \ - } ---- a/include/linux/export.h -+++ b/include/linux/export.h -@@ -45,12 +45,19 @@ extern struct module __this_module; - #define __CRC_SYMBOL(sym, sec) - #endif - -+#ifdef MODULE -+#define __EXPORT_SUFFIX(sym) -+#else -+#define __EXPORT_SUFFIX(sym) "+" #sym -+#endif -+ - /* For every exported symbol, place a struct in the __ksymtab section */ - #define __EXPORT_SYMBOL(sym, sec) \ - extern typeof(sym) sym; \ - __CRC_SYMBOL(sym, sec) \ - static const char __kstrtab_##sym[] \ -- __attribute__((section("__ksymtab_strings"), aligned(1))) \ -+ __attribute__((section("__ksymtab_strings" \ -+ __EXPORT_SUFFIX(sym)), aligned(1))) \ - = MODULE_SYMBOL_PREFIX #sym; \ - static const struct kernel_symbol __ksymtab_##sym \ - __used \ ---- a/scripts/Makefile.build -+++ b/scripts/Makefile.build -@@ -346,7 +346,7 @@ targets += $(extra-y) $(MAKECMDGOALS) $( - # Linker scripts preprocessor (.lds.S -> .lds) - # --------------------------------------------------------------------------- - quiet_cmd_cpp_lds_S = LDS $@ -- cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \ -+ cmd_cpp_lds_S = $(CPP) $(EXTRA_LDSFLAGS) $(cpp_flags) -P -C -U$(ARCH) \ - -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $< - - $(obj)/%.lds: $(src)/%.lds.S FORCE diff --git a/target/linux/generic/patches-3.3/230-openwrt_lzma_options.patch b/target/linux/generic/patches-3.3/230-openwrt_lzma_options.patch deleted file mode 100644 index f17f40ac93..0000000000 --- a/target/linux/generic/patches-3.3/230-openwrt_lzma_options.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/scripts/Makefile.lib -+++ b/scripts/Makefile.lib -@@ -296,7 +296,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^) - - quiet_cmd_lzma = LZMA $@ - cmd_lzma = (cat $(filter-out FORCE,$^) | \ -- lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ -+ lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ - (rm -f $@ ; false) - - quiet_cmd_lzo = LZO $@ ---- a/scripts/gen_initramfs_list.sh -+++ b/scripts/gen_initramfs_list.sh -@@ -226,7 +226,7 @@ cpio_list= - output="/dev/stdout" - output_file="" - is_cpio_compressed= --compr="gzip -n -9 -f" -+compr="gzip -n -9 -f -" - - arg="$1" - case "$arg" in -@@ -240,9 +240,9 @@ case "$arg" in - output_file="$1" - cpio_list="$(mktemp ${TMPDIR:-/tmp}/cpiolist.XXXXXX)" - output=${cpio_list} -- echo "$output_file" | grep -q "\.gz$" && compr="gzip -n -9 -f" -- echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f" -- echo "$output_file" | grep -q "\.lzma$" && compr="lzma -9 -f" -+ echo "$output_file" | grep -q "\.gz$" && compr="gzip -n -9 -f -" -+ echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f -" -+ echo "$output_file" | grep -q "\.lzma$" && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so" - echo "$output_file" | grep -q "\.xz$" && \ - compr="xz --check=crc32 --lzma2=dict=1MiB" - echo "$output_file" | grep -q "\.lzo$" && compr="lzop -9 -f" -@@ -303,7 +303,7 @@ if [ ! -z ${output_file} ]; then - if [ "${is_cpio_compressed}" = "compressed" ]; then - cat ${cpio_tfile} > ${output_file} - else -- (cat ${cpio_tfile} | ${compr} - > ${output_file}) \ -+ (cat ${cpio_tfile} | ${compr} > ${output_file}) \ - || (rm -f ${output_file} ; false) - fi - [ -z ${cpio_file} ] && rm ${cpio_tfile} ---- a/lib/decompress.c -+++ b/lib/decompress.c -@@ -40,6 +40,7 @@ static const struct compress_format { - { {037, 0236}, "gzip", gunzip }, - { {0x42, 0x5a}, "bzip2", bunzip2 }, - { {0x5d, 0x00}, "lzma", unlzma }, -+ { {0x6d, 0x00}, "lzma-openwrt", unlzma }, - { {0xfd, 0x37}, "xz", unxz }, - { {0x89, 0x4c}, "lzo", unlzo }, - { {0, 0}, NULL, NULL } diff --git a/target/linux/generic/patches-3.3/250-netfilter_depends.patch b/target/linux/generic/patches-3.3/250-netfilter_depends.patch deleted file mode 100644 index cbe3892316..0000000000 --- a/target/linux/generic/patches-3.3/250-netfilter_depends.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/net/netfilter/Kconfig -+++ b/net/netfilter/Kconfig -@@ -181,7 +181,6 @@ config NF_CONNTRACK_FTP - - config NF_CONNTRACK_H323 - tristate "H.323 protocol support" -- depends on (IPV6 || IPV6=n) - depends on NETFILTER_ADVANCED - help - H.323 is a VoIP signalling protocol from ITU-T. As one of the most -@@ -627,7 +626,6 @@ config NETFILTER_XT_TARGET_SECMARK - - config NETFILTER_XT_TARGET_TCPMSS - tristate '"TCPMSS" target support' -- depends on (IPV6 || IPV6=n) - default m if NETFILTER_ADVANCED=n - ---help--- - This option adds a `TCPMSS' target, which allows you to alter the diff --git a/target/linux/generic/patches-3.3/251-sound_kconfig.patch b/target/linux/generic/patches-3.3/251-sound_kconfig.patch deleted file mode 100644 index 916363c814..0000000000 --- a/target/linux/generic/patches-3.3/251-sound_kconfig.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/sound/core/Kconfig -+++ b/sound/core/Kconfig -@@ -7,13 +7,13 @@ config SND_PCM - select SND_TIMER - - config SND_HWDEP -- tristate -+ tristate "Sound hardware support" - - config SND_RAWMIDI - tristate - - config SND_COMPRESS_OFFLOAD -- tristate -+ tristate "Compression offloading support" - - # To be effective this also requires INPUT - users should say: - # select SND_JACK if INPUT=y || INPUT=SND diff --git a/target/linux/generic/patches-3.3/252-mv_cesa_depends.patch b/target/linux/generic/patches-3.3/252-mv_cesa_depends.patch deleted file mode 100644 index 53701458aa..0000000000 --- a/target/linux/generic/patches-3.3/252-mv_cesa_depends.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -172,6 +172,7 @@ config CRYPTO_DEV_MV_CESA - depends on PLAT_ORION - select CRYPTO_ALGAPI - select CRYPTO_AES -+ select CRYPTO_HASH2 - select CRYPTO_BLKCIPHER2 - select CRYPTO_HASH - help diff --git a/target/linux/generic/patches-3.3/253-ssb_b43_default_on.patch b/target/linux/generic/patches-3.3/253-ssb_b43_default_on.patch deleted file mode 100644 index 29d2a41a3b..0000000000 --- a/target/linux/generic/patches-3.3/253-ssb_b43_default_on.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/ssb/Kconfig -+++ b/drivers/ssb/Kconfig -@@ -29,6 +29,7 @@ config SSB_SPROM - config SSB_BLOCKIO - bool - depends on SSB -+ default y - - config SSB_PCIHOST_POSSIBLE - bool -@@ -49,7 +50,7 @@ config SSB_PCIHOST - config SSB_B43_PCI_BRIDGE - bool - depends on SSB_PCIHOST -- default n -+ default y - - config SSB_PCMCIAHOST_POSSIBLE - bool ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -17,6 +17,7 @@ config BCMA - config BCMA_BLOCKIO - bool - depends on BCMA -+ default y - - config BCMA_HOST_PCI_POSSIBLE - bool diff --git a/target/linux/generic/patches-3.3/254-textsearch_kconfig_hacks.patch b/target/linux/generic/patches-3.3/254-textsearch_kconfig_hacks.patch deleted file mode 100644 index 1659fda937..0000000000 --- a/target/linux/generic/patches-3.3/254-textsearch_kconfig_hacks.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/lib/Kconfig -+++ b/lib/Kconfig -@@ -207,16 +207,16 @@ config BCH_CONST_T - # Textsearch support is select'ed if needed - # - config TEXTSEARCH -- boolean -+ boolean "Textsearch support" - - config TEXTSEARCH_KMP -- tristate -+ tristate "Textsearch KMP" - - config TEXTSEARCH_BM -- tristate -+ tristate "Textsearch BM" - - config TEXTSEARCH_FSM -- tristate -+ tristate "Textsearch FSM" - - config BTREE - boolean diff --git a/target/linux/generic/patches-3.3/255-lib80211_kconfig_hacks.patch b/target/linux/generic/patches-3.3/255-lib80211_kconfig_hacks.patch deleted file mode 100644 index 8dde331a9d..0000000000 --- a/target/linux/generic/patches-3.3/255-lib80211_kconfig_hacks.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/net/wireless/Kconfig -+++ b/net/wireless/Kconfig -@@ -143,13 +143,13 @@ config LIB80211 - you want this built into your kernel. - - config LIB80211_CRYPT_WEP -- tristate -+ tristate "LIB80211_CRYPT_WEP" - - config LIB80211_CRYPT_CCMP -- tristate -+ tristate "LIB80211_CRYPT_CCMP" - - config LIB80211_CRYPT_TKIP -- tristate -+ tristate "LIB80211_CRYPT_TKIP" - - config LIB80211_DEBUG - bool "lib80211 debugging messages" diff --git a/target/linux/generic/patches-3.3/256-crypto_add_kconfig_prompts.patch b/target/linux/generic/patches-3.3/256-crypto_add_kconfig_prompts.patch deleted file mode 100644 index 8462c711f0..0000000000 --- a/target/linux/generic/patches-3.3/256-crypto_add_kconfig_prompts.patch +++ /dev/null @@ -1,47 +0,0 @@ ---- a/crypto/Kconfig -+++ b/crypto/Kconfig -@@ -31,7 +31,7 @@ config CRYPTO_FIPS - this is. - - config CRYPTO_ALGAPI -- tristate -+ tristate "ALGAPI" - select CRYPTO_ALGAPI2 - help - This option provides the API for cryptographic algorithms. -@@ -40,7 +40,7 @@ config CRYPTO_ALGAPI2 - tristate - - config CRYPTO_AEAD -- tristate -+ tristate "AEAD" - select CRYPTO_AEAD2 - select CRYPTO_ALGAPI - -@@ -49,7 +49,7 @@ config CRYPTO_AEAD2 - select CRYPTO_ALGAPI2 - - config CRYPTO_BLKCIPHER -- tristate -+ tristate "BLKCIPHER" - select CRYPTO_BLKCIPHER2 - select CRYPTO_ALGAPI - -@@ -60,7 +60,7 @@ config CRYPTO_BLKCIPHER2 - select CRYPTO_WORKQUEUE - - config CRYPTO_HASH -- tristate -+ tristate "HASH" - select CRYPTO_HASH2 - select CRYPTO_ALGAPI - -@@ -69,7 +69,7 @@ config CRYPTO_HASH2 - select CRYPTO_ALGAPI2 - - config CRYPTO_RNG -- tristate -+ tristate "RNG" - select CRYPTO_RNG2 - select CRYPTO_ALGAPI - diff --git a/target/linux/generic/patches-3.3/257-wireless_ext_kconfig_hack.patch b/target/linux/generic/patches-3.3/257-wireless_ext_kconfig_hack.patch deleted file mode 100644 index daac5898ae..0000000000 --- a/target/linux/generic/patches-3.3/257-wireless_ext_kconfig_hack.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/net/wireless/Kconfig -+++ b/net/wireless/Kconfig -@@ -1,5 +1,5 @@ - config WIRELESS_EXT -- bool -+ bool "Wireless extensions" - - config WEXT_CORE - def_bool y -@@ -11,10 +11,10 @@ config WEXT_PROC - depends on WEXT_CORE - - config WEXT_SPY -- bool -+ bool "WEXT_SPY" - - config WEXT_PRIV -- bool -+ bool "WEXT_PRIV" - - config CFG80211 - tristate "cfg80211 - wireless configuration API" diff --git a/target/linux/generic/patches-3.3/258-netfilter_netlink_kconfig_hack.patch b/target/linux/generic/patches-3.3/258-netfilter_netlink_kconfig_hack.patch deleted file mode 100644 index 9d827c253b..0000000000 --- a/target/linux/generic/patches-3.3/258-netfilter_netlink_kconfig_hack.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/net/netfilter/Kconfig -+++ b/net/netfilter/Kconfig -@@ -2,7 +2,7 @@ menu "Core Netfilter Configuration" - depends on NET && INET && NETFILTER - - config NETFILTER_NETLINK -- tristate -+ tristate "Netfilter NFNETLINK interface" - - config NETFILTER_NETLINK_ACCT - tristate "Netfilter NFACCT over NFNETLINK interface" diff --git a/target/linux/generic/patches-3.3/259-compressor_kconfig_hack.patch b/target/linux/generic/patches-3.3/259-compressor_kconfig_hack.patch deleted file mode 100644 index 2cf86d0880..0000000000 --- a/target/linux/generic/patches-3.3/259-compressor_kconfig_hack.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/lib/Kconfig -+++ b/lib/Kconfig -@@ -105,16 +105,16 @@ config AUDIT_GENERIC - # compression support is select'ed if needed - # - config ZLIB_INFLATE -- tristate -+ tristate "ZLIB inflate support" - - config ZLIB_DEFLATE -- tristate -+ tristate "ZLIB deflate support" - - config LZO_COMPRESS -- tristate -+ tristate "LZO compress support" - - config LZO_DECOMPRESS -- tristate -+ tristate "LZO decompress support" - - source "lib/xz/Kconfig" - diff --git a/target/linux/generic/patches-3.3/260-move_bcm963xx_tag.patch b/target/linux/generic/patches-3.3/260-move_bcm963xx_tag.patch deleted file mode 100644 index b281326d66..0000000000 --- a/target/linux/generic/patches-3.3/260-move_bcm963xx_tag.patch +++ /dev/null @@ -1,219 +0,0 @@ ---- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h -+++ /dev/null -@@ -1,96 +0,0 @@ --#ifndef __BCM963XX_TAG_H --#define __BCM963XX_TAG_H -- --#define TAGVER_LEN 4 /* Length of Tag Version */ --#define TAGLAYOUT_LEN 4 /* Length of FlashLayoutVer */ --#define SIG1_LEN 20 /* Company Signature 1 Length */ --#define SIG2_LEN 14 /* Company Signature 2 Length */ --#define BOARDID_LEN 16 /* Length of BoardId */ --#define ENDIANFLAG_LEN 2 /* Endian Flag Length */ --#define CHIPID_LEN 6 /* Chip Id Length */ --#define IMAGE_LEN 10 /* Length of Length Field */ --#define ADDRESS_LEN 12 /* Length of Address field */ --#define DUALFLAG_LEN 2 /* Dual Image flag Length */ --#define INACTIVEFLAG_LEN 2 /* Inactie Flag Length */ --#define RSASIG_LEN 20 /* Length of RSA Signature in tag */ --#define TAGINFO1_LEN 30 /* Length of vendor information field1 in tag */ --#define FLASHLAYOUTVER_LEN 4 /* Length of Flash Layout Version String tag */ --#define TAGINFO2_LEN 16 /* Length of vendor information field2 in tag */ --#define ALTTAGINFO_LEN 54 /* Alternate length for vendor information; Pirelli */ -- --#define NUM_PIRELLI 2 --#define IMAGETAG_CRC_START 0xFFFFFFFF -- --#define PIRELLI_BOARDS { \ -- "AGPF-S0", \ -- "DWV-S0", \ --} -- --/* -- * The broadcom firmware assumes the rootfs starts the image, -- * therefore uses the rootfs start (flash_image_address) -- * to determine where to flash the image. Since we have the kernel first -- * we have to give it the kernel address, but the crc uses the length -- * associated with this address (root_length), which is added to the kernel -- * length (kernel_length) to determine the length of image to flash and thus -- * needs to be rootfs + deadcode (jffs2 EOF marker) --*/ -- --struct bcm_tag { -- /* 0-3: Version of the image tag */ -- char tag_version[TAGVER_LEN]; -- /* 4-23: Company Line 1 */ -- char sig_1[SIG1_LEN]; -- /* 24-37: Company Line 2 */ -- char sig_2[SIG2_LEN]; -- /* 38-43: Chip this image is for */ -- char chip_id[CHIPID_LEN]; -- /* 44-59: Board name */ -- char board_id[BOARDID_LEN]; -- /* 60-61: Map endianness -- 1 BE 0 LE */ -- char big_endian[ENDIANFLAG_LEN]; -- /* 62-71: Total length of image */ -- char total_length[IMAGE_LEN]; -- /* 72-83: Address in memory of CFE */ -- char cfe__address[ADDRESS_LEN]; -- /* 84-93: Size of CFE */ -- char cfe_length[IMAGE_LEN]; -- /* 94-105: Address in memory of image start -- * (kernel for OpenWRT, rootfs for stock firmware) -- */ -- char flash_image_start[ADDRESS_LEN]; -- /* 106-115: Size of rootfs */ -- char root_length[IMAGE_LEN]; -- /* 116-127: Address in memory of kernel */ -- char kernel_address[ADDRESS_LEN]; -- /* 128-137: Size of kernel */ -- char kernel_length[IMAGE_LEN]; -- /* 138-139: Unused at the moment */ -- char dual_image[DUALFLAG_LEN]; -- /* 140-141: Unused at the moment */ -- char inactive_flag[INACTIVEFLAG_LEN]; -- /* 142-161: RSA Signature (not used; some vendors may use this) */ -- char rsa_signature[RSASIG_LEN]; -- /* 162-191: Compilation and related information (not used in OpenWrt) */ -- char information1[TAGINFO1_LEN]; -- /* 192-195: Version flash layout */ -- char flash_layout_ver[FLASHLAYOUTVER_LEN]; -- /* 196-199: kernel+rootfs CRC32 */ -- __u32 fskernel_crc; -- /* 200-215: Unused except on Alice Gate where is is information */ -- char information2[TAGINFO2_LEN]; -- /* 216-219: CRC32 of image less imagetag (kernel for Alice Gate) */ -- __u32 image_crc; -- /* 220-223: CRC32 of rootfs partition */ -- __u32 rootfs_crc; -- /* 224-227: CRC32 of kernel partition */ -- __u32 kernel_crc; -- /* 228-235: Unused at present */ -- char reserved1[8]; -- /* 236-239: CRC32 of header excluding last 20 bytes */ -- __u32 header_crc; -- /* 240-255: Unused at present */ -- char reserved2[16]; --}; -- --#endif /* __BCM63XX_TAG_H */ ---- a/drivers/mtd/bcm63xxpart.c -+++ b/drivers/mtd/bcm63xxpart.c -@@ -32,7 +32,7 @@ - #include - #include - --#include -+#include - #include - - #define BCM63XX_EXTENDED_SIZE 0xBFC00000 /* Extended flash address */ ---- a/include/linux/Kbuild -+++ b/include/linux/Kbuild -@@ -77,6 +77,7 @@ header-y += blk_types.h - header-y += blkpg.h - header-y += blktrace_api.h - header-y += bpqether.h -+header-y += bcm963xx_tag.h - header-y += bsg.h - header-y += can.h - header-y += capability.h ---- /dev/null -+++ b/include/linux/bcm963xx_tag.h -@@ -0,0 +1,96 @@ -+#ifndef __BCM963XX_TAG_H -+#define __BCM963XX_TAG_H -+ -+#define TAGVER_LEN 4 /* Length of Tag Version */ -+#define TAGLAYOUT_LEN 4 /* Length of FlashLayoutVer */ -+#define SIG1_LEN 20 /* Company Signature 1 Length */ -+#define SIG2_LEN 14 /* Company Signature 2 Length */ -+#define BOARDID_LEN 16 /* Length of BoardId */ -+#define ENDIANFLAG_LEN 2 /* Endian Flag Length */ -+#define CHIPID_LEN 6 /* Chip Id Length */ -+#define IMAGE_LEN 10 /* Length of Length Field */ -+#define ADDRESS_LEN 12 /* Length of Address field */ -+#define DUALFLAG_LEN 2 /* Dual Image flag Length */ -+#define INACTIVEFLAG_LEN 2 /* Inactie Flag Length */ -+#define RSASIG_LEN 20 /* Length of RSA Signature in tag */ -+#define TAGINFO1_LEN 30 /* Length of vendor information field1 in tag */ -+#define FLASHLAYOUTVER_LEN 4 /* Length of Flash Layout Version String tag */ -+#define TAGINFO2_LEN 16 /* Length of vendor information field2 in tag */ -+#define ALTTAGINFO_LEN 54 /* Alternate length for vendor information; Pirelli */ -+ -+#define NUM_PIRELLI 2 -+#define IMAGETAG_CRC_START 0xFFFFFFFF -+ -+#define PIRELLI_BOARDS { \ -+ "AGPF-S0", \ -+ "DWV-S0", \ -+} -+ -+/* -+ * The broadcom firmware assumes the rootfs starts the image, -+ * therefore uses the rootfs start (flash_image_address) -+ * to determine where to flash the image. Since we have the kernel first -+ * we have to give it the kernel address, but the crc uses the length -+ * associated with this address (root_length), which is added to the kernel -+ * length (kernel_length) to determine the length of image to flash and thus -+ * needs to be rootfs + deadcode (jffs2 EOF marker) -+*/ -+ -+struct bcm_tag { -+ /* 0-3: Version of the image tag */ -+ char tag_version[TAGVER_LEN]; -+ /* 4-23: Company Line 1 */ -+ char sig_1[SIG1_LEN]; -+ /* 24-37: Company Line 2 */ -+ char sig_2[SIG2_LEN]; -+ /* 38-43: Chip this image is for */ -+ char chip_id[CHIPID_LEN]; -+ /* 44-59: Board name */ -+ char board_id[BOARDID_LEN]; -+ /* 60-61: Map endianness -- 1 BE 0 LE */ -+ char big_endian[ENDIANFLAG_LEN]; -+ /* 62-71: Total length of image */ -+ char total_length[IMAGE_LEN]; -+ /* 72-83: Address in memory of CFE */ -+ char cfe__address[ADDRESS_LEN]; -+ /* 84-93: Size of CFE */ -+ char cfe_length[IMAGE_LEN]; -+ /* 94-105: Address in memory of image start -+ * (kernel for OpenWRT, rootfs for stock firmware) -+ */ -+ char flash_image_start[ADDRESS_LEN]; -+ /* 106-115: Size of rootfs */ -+ char root_length[IMAGE_LEN]; -+ /* 116-127: Address in memory of kernel */ -+ char kernel_address[ADDRESS_LEN]; -+ /* 128-137: Size of kernel */ -+ char kernel_length[IMAGE_LEN]; -+ /* 138-139: Unused at the moment */ -+ char dual_image[DUALFLAG_LEN]; -+ /* 140-141: Unused at the moment */ -+ char inactive_flag[INACTIVEFLAG_LEN]; -+ /* 142-161: RSA Signature (not used; some vendors may use this) */ -+ char rsa_signature[RSASIG_LEN]; -+ /* 162-191: Compilation and related information (not used in OpenWrt) */ -+ char information1[TAGINFO1_LEN]; -+ /* 192-195: Version flash layout */ -+ char flash_layout_ver[FLASHLAYOUTVER_LEN]; -+ /* 196-199: kernel+rootfs CRC32 */ -+ __u32 fskernel_crc; -+ /* 200-215: Unused except on Alice Gate where is is information */ -+ char information2[TAGINFO2_LEN]; -+ /* 216-219: CRC32 of image less imagetag (kernel for Alice Gate) */ -+ __u32 image_crc; -+ /* 220-223: CRC32 of rootfs partition */ -+ __u32 rootfs_crc; -+ /* 224-227: CRC32 of kernel partition */ -+ __u32 kernel_crc; -+ /* 228-235: Unused at present */ -+ char reserved1[8]; -+ /* 236-239: CRC32 of header excluding last 20 bytes */ -+ __u32 header_crc; -+ /* 240-255: Unused at present */ -+ char reserved2[16]; -+}; -+ -+#endif /* __BCM63XX_TAG_H */ diff --git a/target/linux/generic/patches-3.3/270-regmap_dynamic.patch b/target/linux/generic/patches-3.3/270-regmap_dynamic.patch deleted file mode 100644 index b1cfc8a628..0000000000 --- a/target/linux/generic/patches-3.3/270-regmap_dynamic.patch +++ /dev/null @@ -1,55 +0,0 @@ ---- a/drivers/base/regmap/Kconfig -+++ b/drivers/base/regmap/Kconfig -@@ -3,16 +3,18 @@ - # subsystems should select the appropriate symbols. - - config REGMAP -- default y if (REGMAP_I2C || REGMAP_SPI) - select LZO_COMPRESS - select LZO_DECOMPRESS -- bool -+ tristate "Regmap" - - config REGMAP_I2C -- tristate -+ select REGMAP -+ tristate "Regmap I2C" - - config REGMAP_SPI -- tristate -+ select REGMAP -+ depends on SPI_MASTER -+ tristate "Regmap SPI" - - config REGMAP_IRQ - bool ---- a/drivers/base/regmap/Makefile -+++ b/drivers/base/regmap/Makefile -@@ -1,6 +1,8 @@ --obj-$(CONFIG_REGMAP) += regmap.o regcache.o --obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-lzo.o --obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o -+regmap-core-objs = regmap.o regcache.o regcache-rbtree.o regcache-lzo.o -+ifdef CONFIG_DEBUG_FS -+regmap-core-objs += regmap-debugfs.o -+endif -+obj-$(CONFIG_REGMAP) += regmap-core.o - obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o - obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o - obj-$(CONFIG_REGMAP_IRQ) += regmap-irq.o ---- a/drivers/base/regmap/regmap.c -+++ b/drivers/base/regmap/regmap.c -@@ -13,6 +13,7 @@ - #include - #include - #include -+#include - #include - - #define CREATE_TRACE_POINTS -@@ -679,3 +680,5 @@ static int __init regmap_initcall(void) - return 0; - } - postcore_initcall(regmap_initcall); -+ -+MODULE_LICENSE("GPL"); diff --git a/target/linux/generic/patches-3.3/300-mips_expose_boot_raw.patch b/target/linux/generic/patches-3.3/300-mips_expose_boot_raw.patch deleted file mode 100644 index b114ef4045..0000000000 --- a/target/linux/generic/patches-3.3/300-mips_expose_boot_raw.patch +++ /dev/null @@ -1,39 +0,0 @@ -From: Mark Miller - -This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on -certain Broadcom chipsets running CFE in order to load the kernel. - -Signed-off-by: Mark Miller -Acked-by: Rob Landley ---- ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -877,9 +877,6 @@ config ARC - config ARCH_MAY_HAVE_PC_FDC - bool - --config BOOT_RAW -- bool -- - config CEVT_BCM1480 - bool - -@@ -2330,6 +2327,18 @@ config USE_OF - help - Include support for flattened device tree machine descriptions. - -+config BOOT_RAW -+ bool "Enable the kernel to be executed from the load address" -+ default n -+ help -+ Allow the kernel to be executed from the load address for -+ bootloaders which cannot read the ELF format. This places -+ a jump to start_kernel at the load address. -+ -+ If unsure, say N. -+ -+ -+ - endmenu - - config LOCKDEP_SUPPORT diff --git a/target/linux/generic/patches-3.3/301-mips_image_cmdline_hack.patch b/target/linux/generic/patches-3.3/301-mips_image_cmdline_hack.patch deleted file mode 100644 index 9193c68f0d..0000000000 --- a/target/linux/generic/patches-3.3/301-mips_image_cmdline_hack.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -976,6 +976,10 @@ config SYNC_R4K - config MIPS_MACHINE - def_bool n - -+config IMAGE_CMDLINE_HACK -+ bool "OpenWrt specific image command line hack" -+ default n -+ - config NO_IOPORT - def_bool n - ---- a/arch/mips/kernel/head.S -+++ b/arch/mips/kernel/head.S -@@ -141,6 +141,12 @@ FEXPORT(__kernel_entry) - j kernel_entry - #endif - -+#ifdef CONFIG_IMAGE_CMDLINE_HACK -+ .ascii "CMDLINE:" -+EXPORT(__image_cmdline) -+ .fill 0x400 -+#endif /* CONFIG_IMAGE_CMDLINE_HACK */ -+ - __REF - - NESTED(kernel_entry, 16, sp) # kernel entry point diff --git a/target/linux/generic/patches-3.3/302-mips_use_generic_thread_info_allocator.patch b/target/linux/generic/patches-3.3/302-mips_use_generic_thread_info_allocator.patch deleted file mode 100644 index 1bcc74b41a..0000000000 --- a/target/linux/generic/patches-3.3/302-mips_use_generic_thread_info_allocator.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/arch/mips/include/asm/thread_info.h -+++ b/arch/mips/include/asm/thread_info.h -@@ -85,6 +85,7 @@ register struct thread_info *__current_t - - #define STACK_WARN (THREAD_SIZE / 8) - -+#if 0 - #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR - - #ifdef CONFIG_DEBUG_STACK_USAGE -@@ -96,6 +97,7 @@ register struct thread_info *__current_t - #endif - - #define free_thread_info(info) kfree(info) -+#endif - - #endif /* !__ASSEMBLY__ */ - diff --git a/target/linux/generic/patches-3.3/303-mips_fix_kexec.patch b/target/linux/generic/patches-3.3/303-mips_fix_kexec.patch deleted file mode 100644 index e6928dde91..0000000000 --- a/target/linux/generic/patches-3.3/303-mips_fix_kexec.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/kernel/machine_kexec.c -+++ b/arch/mips/kernel/machine_kexec.c -@@ -52,7 +52,7 @@ machine_kexec(struct kimage *image) - reboot_code_buffer = - (unsigned long)page_address(image->control_code_page); - -- kexec_start_address = image->start; -+ kexec_start_address = (unsigned long) phys_to_virt(image->start); - kexec_indirection_page = - (unsigned long) phys_to_virt(image->head & PAGE_MASK); - diff --git a/target/linux/generic/patches-3.3/304-mips_disable_fpu.patch b/target/linux/generic/patches-3.3/304-mips_disable_fpu.patch deleted file mode 100644 index e747feac61..0000000000 --- a/target/linux/generic/patches-3.3/304-mips_disable_fpu.patch +++ /dev/null @@ -1,160 +0,0 @@ -MIPS: allow disabling the kernel FPU emulator - -This patch allows turning off the in-kernel Algorithmics -FPU emulator support, which allows one to save a couple of -precious blocks on an embedded system. - -Signed-off-by: Florian Fainelli --- ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -961,6 +961,17 @@ config I8259 - config MIPS_BONITO64 - bool - -+config MIPS_FPU_EMU -+ bool "Enable FPU emulation" -+ default y -+ help -+ This option allows building a kernel with or without the Algorithmics -+ FPU emulator enabled. Turning off this option results in a kernel which -+ does not catch floating operations exceptions. Make sure that your toolchain -+ is configured to enable software floating point emulation in that case. -+ -+ If unsure say Y here. -+ - config MIPS_MSC - bool - ---- a/arch/mips/math-emu/Makefile -+++ b/arch/mips/math-emu/Makefile -@@ -2,11 +2,13 @@ - # Makefile for the Linux/MIPS kernel FPU emulation. - # - --obj-y := cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \ -+obj-y := kernel_linkage.o dsemul.o cp1emu.o -+ -+obj-$(CONFIG_MIPS_FPU_EMU) += ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \ - ieee754xcpt.o dp_frexp.o dp_modf.o dp_div.o dp_mul.o dp_sub.o \ - dp_add.o dp_fsp.o dp_cmp.o dp_logb.o dp_scalb.o dp_simple.o \ - dp_tint.o dp_fint.o dp_tlong.o dp_flong.o sp_frexp.o sp_modf.o \ - sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \ - sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \ -- dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o -+ dp_sqrt.o sp_sqrt.o - ---- a/arch/mips/math-emu/cp1emu.c -+++ b/arch/mips/math-emu/cp1emu.c -@@ -58,7 +58,11 @@ - #define __mips 4 - - /* Function which emulates a floating point instruction. */ -+#ifdef CONFIG_DEBUG_FS -+DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats); -+#endif - -+#ifdef CONFIG_MIPS_FPU_EMU - static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *, - mips_instruction); - -@@ -69,10 +73,6 @@ static int fpux_emu(struct pt_regs *, - - /* Further private data for which no space exists in mips_fpu_struct */ - --#ifdef CONFIG_DEBUG_FS --DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats); --#endif -- - /* Control registers */ - - #define FPCREG_RID 0 /* $0 = revision id */ -@@ -1360,7 +1360,6 @@ int fpu_emulator_cop1Handler(struct pt_r - - return sig; - } -- - #ifdef CONFIG_DEBUG_FS - - static int fpuemu_stat_get(void *data, u64 *val) -@@ -1409,4 +1408,11 @@ static int __init debugfs_fpuemu(void) - return 0; - } - __initcall(debugfs_fpuemu); --#endif -+#endif /* CONFIG_DEBUGFS */ -+#else -+int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, -+ int has_fpu) -+{ -+ return 0; -+} -+#endif /* CONFIG_MIPS_FPU_EMU */ ---- a/arch/mips/math-emu/dsemul.c -+++ b/arch/mips/math-emu/dsemul.c -@@ -109,6 +109,7 @@ int mips_dsemul(struct pt_regs *regs, mi - return SIGILL; /* force out of emulation loop */ - } - -+#ifdef CONFIG_MIPS_FPU_EMU - int do_dsemulret(struct pt_regs *xcp) - { - struct emuframe __user *fr; -@@ -165,3 +166,9 @@ int do_dsemulret(struct pt_regs *xcp) - - return 1; - } -+#else -+int do_dsemulret(struct pt_regs *xcp) -+{ -+ return 0; -+} -+#endif /* CONFIG_MIPS_FPU_EMU */ ---- a/arch/mips/math-emu/kernel_linkage.c -+++ b/arch/mips/math-emu/kernel_linkage.c -@@ -29,6 +29,7 @@ - - #define SIGNALLING_NAN 0x7ff800007ff80000LL - -+#ifdef CONFIG_MIPS_FPU_EMU - void fpu_emulator_init_fpu(void) - { - static int first = 1; -@@ -112,4 +113,36 @@ int fpu_emulator_restore_context32(struc - - return err; - } --#endif -+#endif /* CONFIG_64BIT */ -+#else -+ -+void fpu_emulator_init_fpu(void) -+{ -+ printk(KERN_INFO "FPU emulator disabled, make sure your toolchain" -+ "was compiled with software floating point support (soft-float)\n"); -+ return; -+} -+ -+int fpu_emulator_save_context(struct sigcontext __user *sc) -+{ -+ return 0; -+} -+ -+int fpu_emulator_restore_context(struct sigcontext __user *sc) -+{ -+ return 0; -+} -+ -+int fpu_emulator_save_context32(struct sigcontext32 __user *sc) -+{ -+ return 0; -+} -+ -+int fpu_emulator_restore_context32(struct sigcontext32 __user *sc) -+{ -+ return 0; -+} -+ -+#ifdef CONFIG_64BIT -+#endif /* CONFIG_64BIT */ -+#endif /* CONFIG_MIPS_FPU_EMU */ diff --git a/target/linux/generic/patches-3.3/305-mips_module_reloc.patch b/target/linux/generic/patches-3.3/305-mips_module_reloc.patch deleted file mode 100644 index b4b142cb75..0000000000 --- a/target/linux/generic/patches-3.3/305-mips_module_reloc.patch +++ /dev/null @@ -1,371 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -90,8 +90,8 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin - cflags-y += -G 0 -mno-abicalls -fno-pic -pipe - cflags-y += -msoft-float - LDFLAGS_vmlinux += -G 0 -static -n -nostdlib --KBUILD_AFLAGS_MODULE += -mlong-calls --KBUILD_CFLAGS_MODULE += -mlong-calls -+KBUILD_AFLAGS_MODULE += -mno-long-calls -+KBUILD_CFLAGS_MODULE += -mno-long-calls - - cflags-y += -ffreestanding - ---- a/arch/mips/include/asm/module.h -+++ b/arch/mips/include/asm/module.h -@@ -9,6 +9,11 @@ struct mod_arch_specific { - struct list_head dbe_list; - const struct exception_table_entry *dbe_start; - const struct exception_table_entry *dbe_end; -+ -+ void *phys_plt_tbl; -+ void *virt_plt_tbl; -+ unsigned int phys_plt_offset; -+ unsigned int virt_plt_offset; - }; - - typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */ ---- a/arch/mips/kernel/module.c -+++ b/arch/mips/kernel/module.c -@@ -44,14 +44,219 @@ static struct mips_hi16 *mips_hi16_list; - static LIST_HEAD(dbe_list); - static DEFINE_SPINLOCK(dbe_lock); - --#ifdef MODULE_START -+/* -+ * Get the potential max trampolines size required of the init and -+ * non-init sections. Only used if we cannot find enough contiguous -+ * physically mapped memory to put the module into. -+ */ -+static unsigned int -+get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, -+ const char *secstrings, unsigned int symindex, bool is_init) -+{ -+ unsigned long ret = 0; -+ unsigned int i, j; -+ Elf_Sym *syms; -+ -+ /* Everything marked ALLOC (this includes the exported symbols) */ -+ for (i = 1; i < hdr->e_shnum; ++i) { -+ unsigned int info = sechdrs[i].sh_info; -+ -+ if (sechdrs[i].sh_type != SHT_REL -+ && sechdrs[i].sh_type != SHT_RELA) -+ continue; -+ -+ /* Not a valid relocation section? */ -+ if (info >= hdr->e_shnum) -+ continue; -+ -+ /* Don't bother with non-allocated sections */ -+ if (!(sechdrs[info].sh_flags & SHF_ALLOC)) -+ continue; -+ -+ /* If it's called *.init*, and we're not init, we're -+ not interested */ -+ if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0) -+ != is_init) -+ continue; -+ -+ syms = (Elf_Sym *) sechdrs[symindex].sh_addr; -+ if (sechdrs[i].sh_type == SHT_REL) { -+ Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr; -+ unsigned int size = sechdrs[i].sh_size / sizeof(*rel); -+ -+ for (j = 0; j < size; ++j) { -+ Elf_Sym *sym; -+ -+ if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26) -+ continue; -+ -+ sym = syms + ELF_MIPS_R_SYM(rel[j]); -+ if (!is_init && sym->st_shndx != SHN_UNDEF) -+ continue; -+ -+ ret += 4 * sizeof(int); -+ } -+ } else { -+ Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr; -+ unsigned int size = sechdrs[i].sh_size / sizeof(*rela); -+ -+ for (j = 0; j < size; ++j) { -+ Elf_Sym *sym; -+ -+ if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26) -+ continue; -+ -+ sym = syms + ELF_MIPS_R_SYM(rela[j]); -+ if (!is_init && sym->st_shndx != SHN_UNDEF) -+ continue; -+ -+ ret += 4 * sizeof(int); -+ } -+ } -+ } -+ -+ return ret; -+} -+ -+#ifndef MODULE_START -+static void *alloc_phys(unsigned long size) -+{ -+ unsigned order; -+ struct page *page; -+ struct page *p; -+ -+ size = PAGE_ALIGN(size); -+ order = get_order(size); -+ -+ page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN | -+ __GFP_THISNODE, order); -+ if (!page) -+ return NULL; -+ -+ split_page(page, order); -+ -+ for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p) -+ __free_page(p); -+ -+ return page_address(page); -+} -+#endif -+ -+static void free_phys(void *ptr, unsigned long size) -+{ -+ struct page *page; -+ struct page *end; -+ -+ page = virt_to_page(ptr); -+ end = page + (PAGE_ALIGN(size) >> PAGE_SHIFT); -+ -+ for (; page < end; ++page) -+ __free_page(page); -+} -+ -+ - void *module_alloc(unsigned long size) - { -+#ifdef MODULE_START - return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END, - GFP_KERNEL, PAGE_KERNEL, -1, - __builtin_return_address(0)); -+#else -+ void *ptr; -+ -+ if (size == 0) -+ return NULL; -+ -+ ptr = alloc_phys(size); -+ -+ /* If we failed to allocate physically contiguous memory, -+ * fall back to regular vmalloc. The module loader code will -+ * create jump tables to handle long jumps */ -+ if (!ptr) -+ return vmalloc(size); -+ -+ return ptr; -+#endif - } -+ -+static inline bool is_phys_addr(void *ptr) -+{ -+#ifdef CONFIG_64BIT -+ return (KSEGX((unsigned long)ptr) == CKSEG0); -+#else -+ return (KSEGX(ptr) == KSEG0); - #endif -+} -+ -+/* Free memory returned from module_alloc */ -+void module_free(struct module *mod, void *module_region) -+{ -+ if (is_phys_addr(module_region)) { -+ if (mod->module_init == module_region) -+ free_phys(module_region, mod->init_size); -+ else if (mod->module_core == module_region) -+ free_phys(module_region, mod->core_size); -+ else -+ BUG(); -+ } else { -+ vfree(module_region); -+ } -+} -+ -+static void *__module_alloc(int size, bool phys) -+{ -+ void *ptr; -+ -+ if (phys) -+ ptr = kmalloc(size, GFP_KERNEL); -+ else -+ ptr = vmalloc(size); -+ return ptr; -+} -+ -+static void __module_free(void *ptr) -+{ -+ if (is_phys_addr(ptr)) -+ kfree(ptr); -+ else -+ vfree(ptr); -+} -+ -+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, -+ char *secstrings, struct module *mod) -+{ -+ unsigned int symindex = 0; -+ unsigned int core_size, init_size; -+ int i; -+ -+ for (i = 1; i < hdr->e_shnum; i++) -+ if (sechdrs[i].sh_type == SHT_SYMTAB) -+ symindex = i; -+ -+ core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false); -+ init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true); -+ -+ mod->arch.phys_plt_offset = 0; -+ mod->arch.virt_plt_offset = 0; -+ mod->arch.phys_plt_tbl = NULL; -+ mod->arch.virt_plt_tbl = NULL; -+ -+ if ((core_size + init_size) == 0) -+ return 0; -+ -+ mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1); -+ if (!mod->arch.phys_plt_tbl) -+ return -ENOMEM; -+ -+ mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0); -+ if (!mod->arch.virt_plt_tbl) { -+ __module_free(mod->arch.phys_plt_tbl); -+ mod->arch.phys_plt_tbl = NULL; -+ return -ENOMEM; -+ } -+ -+ return 0; -+} - - static int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v) - { -@@ -72,28 +277,36 @@ static int apply_r_mips_32_rela(struct m - return 0; - } - --static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v) -+static Elf_Addr add_plt_entry_to(unsigned *plt_offset, -+ void *start, Elf_Addr v) - { -- if (v % 4) { -- pr_err("module %s: dangerous R_MIPS_26 REL relocation\n", -- me->name); -- return -ENOEXEC; -- } -+ unsigned *tramp = start + *plt_offset; -+ *plt_offset += 4 * sizeof(int); - -- if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { -- printk(KERN_ERR -- "module %s: relocation overflow\n", -- me->name); -- return -ENOEXEC; -- } -+ /* adjust carry for addiu */ -+ if (v & 0x00008000) -+ v += 0x10000; - -- *location = (*location & ~0x03ffffff) | -- ((*location + (v >> 2)) & 0x03ffffff); -+ tramp[0] = 0x3c190000 | (v >> 16); /* lui t9, hi16 */ -+ tramp[1] = 0x27390000 | (v & 0xffff); /* addiu t9, t9, lo16 */ -+ tramp[2] = 0x03200008; /* jr t9 */ -+ tramp[3] = 0x00000000; /* nop */ - -- return 0; -+ return (Elf_Addr) tramp; - } - --static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v) -+static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v) -+{ -+ if (is_phys_addr(location)) -+ return add_plt_entry_to(&me->arch.phys_plt_offset, -+ me->arch.phys_plt_tbl, v); -+ else -+ return add_plt_entry_to(&me->arch.virt_plt_offset, -+ me->arch.virt_plt_tbl, v); -+ -+} -+ -+static int set_r_mips_26(struct module *me, u32 *location, u32 ofs, Elf_Addr v) - { - if (v % 4) { - pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n", -@@ -102,17 +315,31 @@ static int apply_r_mips_26_rela(struct m - } - - if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { -- printk(KERN_ERR -+ v = add_plt_entry(me, location, v + (ofs << 2)); -+ if (!v) { -+ printk(KERN_ERR - "module %s: relocation overflow\n", - me->name); -- return -ENOEXEC; -+ return -ENOEXEC; -+ } -+ ofs = 0; - } - -- *location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff); -+ *location = (*location & ~0x03ffffff) | ((ofs + (v >> 2)) & 0x03ffffff); - - return 0; - } - -+static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v) -+{ -+ return set_r_mips_26(me, location, *location & 0x03ffffff, v); -+} -+ -+static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v) -+{ -+ return set_r_mips_26(me, location, 0, v); -+} -+ - static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v) - { - struct mips_hi16 *n; -@@ -380,11 +607,32 @@ int module_finalize(const Elf_Ehdr *hdr, - list_add(&me->arch.dbe_list, &dbe_list); - spin_unlock_irq(&dbe_lock); - } -+ -+ /* Get rid of the fixup trampoline if we're running the module -+ * from physically mapped address space */ -+ if (me->arch.phys_plt_offset == 0) { -+ __module_free(me->arch.phys_plt_tbl); -+ me->arch.phys_plt_tbl = NULL; -+ } -+ if (me->arch.virt_plt_offset == 0) { -+ __module_free(me->arch.virt_plt_tbl); -+ me->arch.virt_plt_tbl = NULL; -+ } -+ - return 0; - } - - void module_arch_cleanup(struct module *mod) - { -+ if (mod->arch.phys_plt_tbl) { -+ __module_free(mod->arch.phys_plt_tbl); -+ mod->arch.phys_plt_tbl = NULL; -+ } -+ if (mod->arch.virt_plt_tbl) { -+ __module_free(mod->arch.virt_plt_tbl); -+ mod->arch.virt_plt_tbl = NULL; -+ } -+ - spin_lock_irq(&dbe_lock); - list_del(&mod->arch.dbe_list); - spin_unlock_irq(&dbe_lock); diff --git a/target/linux/generic/patches-3.3/306-mips_mem_functions_performance.patch b/target/linux/generic/patches-3.3/306-mips_mem_functions_performance.patch deleted file mode 100644 index e4324717b4..0000000000 --- a/target/linux/generic/patches-3.3/306-mips_mem_functions_performance.patch +++ /dev/null @@ -1,83 +0,0 @@ ---- a/arch/mips/include/asm/string.h -+++ b/arch/mips/include/asm/string.h -@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__ - - #define __HAVE_ARCH_MEMSET - extern void *memset(void *__s, int __c, size_t __count); -+#define memset(__s, __c, len) \ -+({ \ -+ size_t __len = (len); \ -+ void *__ret; \ -+ if (__builtin_constant_p(len) && __len >= 64) \ -+ __ret = memset((__s), (__c), __len); \ -+ else \ -+ __ret = __builtin_memset((__s), (__c), __len); \ -+ __ret; \ -+}) - - #define __HAVE_ARCH_MEMCPY - extern void *memcpy(void *__to, __const__ void *__from, size_t __n); -+#define memcpy(dst, src, len) \ -+({ \ -+ size_t __len = (len); \ -+ void *__ret; \ -+ if (__builtin_constant_p(len) && __len >= 64) \ -+ __ret = memcpy((dst), (src), __len); \ -+ else \ -+ __ret = __builtin_memcpy((dst), (src), __len); \ -+ __ret; \ -+}) - - #define __HAVE_ARCH_MEMMOVE - extern void *memmove(void *__dest, __const__ void *__src, size_t __n); -+#define memmove(dst, src, len) \ -+({ \ -+ size_t __len = (len); \ -+ void *__ret; \ -+ if (__builtin_constant_p(len) && __len >= 64) \ -+ __ret = memmove((dst), (src), __len); \ -+ else \ -+ __ret = __builtin_memmove((dst), (src), __len); \ -+ __ret; \ -+}) -+ -+#define __HAVE_ARCH_MEMCMP -+#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len)) - - #endif /* _ASM_STRING_H */ ---- a/arch/mips/lib/Makefile -+++ b/arch/mips/lib/Makefile -@@ -3,7 +3,7 @@ - # - - lib-y += csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \ -- strlen_user.o strncpy_user.o strnlen_user.o uncached.o -+ strlen_user.o strncpy_user.o strnlen_user.o uncached.o memcmp.o - - obj-y += iomap.o - obj-$(CONFIG_PCI) += iomap-pci.o ---- /dev/null -+++ b/arch/mips/lib/memcmp.c -@@ -0,0 +1,22 @@ -+/* -+ * copied from linux/lib/string.c -+ * -+ * Copyright (C) 1991, 1992 Linus Torvalds -+ */ -+ -+#include -+#include -+ -+#undef memcmp -+int memcmp(const void *cs, const void *ct, size_t count) -+{ -+ const unsigned char *su1, *su2; -+ int res = 0; -+ -+ for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--) -+ if ((res = *su1 - *su2) != 0) -+ break; -+ return res; -+} -+EXPORT_SYMBOL(memcmp); -+ diff --git a/target/linux/generic/patches-3.3/307-mips_oprofile_fix.patch b/target/linux/generic/patches-3.3/307-mips_oprofile_fix.patch deleted file mode 100644 index f83c96bb81..0000000000 --- a/target/linux/generic/patches-3.3/307-mips_oprofile_fix.patch +++ /dev/null @@ -1,35 +0,0 @@ ---- a/arch/mips/oprofile/op_model_mipsxx.c -+++ b/arch/mips/oprofile/op_model_mipsxx.c -@@ -298,6 +298,11 @@ static void reset_counters(void *arg) - } - } - -+static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id) -+{ -+ return mipsxx_perfcount_handler(); -+} -+ - static int __init mipsxx_init(void) - { - int counters; -@@ -374,6 +379,10 @@ static int __init mipsxx_init(void) - save_perf_irq = perf_irq; - perf_irq = mipsxx_perfcount_handler; - -+ if (cp0_perfcount_irq >= 0) -+ return request_irq(cp0_perfcount_irq, mipsxx_perfcount_int, -+ IRQF_SHARED, "Perfcounter", save_perf_irq); -+ - return 0; - } - -@@ -381,6 +390,9 @@ static void mipsxx_exit(void) - { - int counters = op_model_mipsxx_ops.num_counters; - -+ if (cp0_perfcount_irq >= 0) -+ free_irq(cp0_perfcount_irq, save_perf_irq); -+ - counters = counters_per_cpu_to_total(counters); - on_each_cpu(reset_counters, (void *)(long)counters, 1); - diff --git a/target/linux/generic/patches-3.3/308-mips-show-correct-cpu-name-for-24KEc.patch b/target/linux/generic/patches-3.3/308-mips-show-correct-cpu-name-for-24KEc.patch deleted file mode 100644 index ac6304a2b5..0000000000 --- a/target/linux/generic/patches-3.3/308-mips-show-correct-cpu-name-for-24KEc.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- a/arch/mips/kernel/cpu-probe.c -+++ b/arch/mips/kernel/cpu-probe.c -@@ -816,10 +816,13 @@ static inline void cpu_probe_mips(struct - __cpu_name[cpu] = "MIPS 20Kc"; - break; - case PRID_IMP_24K: -- case PRID_IMP_24KE: - c->cputype = CPU_24K; - __cpu_name[cpu] = "MIPS 24Kc"; - break; -+ case PRID_IMP_24KE: -+ c->cputype = CPU_24K; -+ __cpu_name[cpu] = "MIPS 24KEc"; -+ break; - case PRID_IMP_25KF: - c->cputype = CPU_25KF; - __cpu_name[cpu] = "MIPS 25Kc"; diff --git a/target/linux/generic/patches-3.3/309-mips_fuse_workaround.patch b/target/linux/generic/patches-3.3/309-mips_fuse_workaround.patch deleted file mode 100644 index 78ab64f062..0000000000 --- a/target/linux/generic/patches-3.3/309-mips_fuse_workaround.patch +++ /dev/null @@ -1,32 +0,0 @@ ---- a/arch/mips/mm/cache.c -+++ b/arch/mips/mm/cache.c -@@ -39,6 +39,7 @@ void (*__flush_kernel_vmap_range)(unsign - void (*__invalidate_kernel_vmap_range)(unsigned long vaddr, int size); - - EXPORT_SYMBOL_GPL(__flush_kernel_vmap_range); -+EXPORT_SYMBOL(__flush_cache_all); - - /* MIPS specific cache operations */ - void (*flush_cache_sigtramp)(unsigned long addr); ---- a/fs/fuse/dev.c -+++ b/fs/fuse/dev.c -@@ -19,6 +19,9 @@ - #include - #include - #include -+#ifdef CONFIG_MIPS -+#include -+#endif - - MODULE_ALIAS_MISCDEV(FUSE_MINOR); - MODULE_ALIAS("devname:fuse"); -@@ -655,6 +658,9 @@ static int fuse_copy_fill(struct fuse_co - static int fuse_copy_do(struct fuse_copy_state *cs, void **val, unsigned *size) - { - unsigned ncpy = min(*size, cs->len); -+#ifdef CONFIG_MIPS -+ __flush_cache_all(); -+#endif - if (val) { - if (cs->write) - memcpy(cs->buf, *val, ncpy); diff --git a/target/linux/generic/patches-3.3/310-arm_module_unresolved_weak_sym.patch b/target/linux/generic/patches-3.3/310-arm_module_unresolved_weak_sym.patch deleted file mode 100644 index d1eba55038..0000000000 --- a/target/linux/generic/patches-3.3/310-arm_module_unresolved_weak_sym.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/arch/arm/kernel/module.c -+++ b/arch/arm/kernel/module.c -@@ -81,6 +81,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons - return -ENOEXEC; - } - -+ if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) && -+ ELF_ST_BIND(sym->st_info) == STB_WEAK) -+ continue; -+ - loc = dstsec->sh_addr + rel->r_offset; - - switch (ELF32_R_TYPE(rel->r_info)) { diff --git a/target/linux/generic/patches-3.3/320-ppc4xx_optimization.patch b/target/linux/generic/patches-3.3/320-ppc4xx_optimization.patch deleted file mode 100644 index 3f67f1b6cb..0000000000 --- a/target/linux/generic/patches-3.3/320-ppc4xx_optimization.patch +++ /dev/null @@ -1,31 +0,0 @@ -Upstream doesn't optimize the kernel and bootwrappers for ppc44x because -they still want to support gcc 3.3 -- well, we don't. - ---- a/arch/powerpc/Makefile -+++ b/arch/powerpc/Makefile -@@ -130,7 +130,8 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y) - KBUILD_CFLAGS += -mno-sched-epilog - endif - --cpu-as-$(CONFIG_4xx) += -Wa,-m405 -+cpu-as-$(CONFIG_40x) += -Wa,-m405 -+cpu-as-$(CONFIG_44x) += -Wa,-m440 - cpu-as-$(CONFIG_ALTIVEC) += -Wa,-maltivec - cpu-as-$(CONFIG_E500) += -Wa,-me500 - cpu-as-$(CONFIG_E200) += -Wa,-me200 ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -38,10 +38,10 @@ BOOTCFLAGS += -I$(obj) -I$(srctree)/$(ob - DTC_FLAGS ?= -p 1024 - - $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 --$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 -+$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 - $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 --$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 --$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 -+$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440 -+$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 - $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 - $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 - $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 diff --git a/target/linux/generic/patches-3.3/321-powerpc_crtsavres_prereq.patch b/target/linux/generic/patches-3.3/321-powerpc_crtsavres_prereq.patch deleted file mode 100644 index 941aa909de..0000000000 --- a/target/linux/generic/patches-3.3/321-powerpc_crtsavres_prereq.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/powerpc/Makefile -+++ b/arch/powerpc/Makefile -@@ -94,7 +94,6 @@ else - endif - endif - --KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o - - ifeq ($(CONFIG_TUNE_CELL),y) - KBUILD_CFLAGS += $(call cc-option,-mtune=cell) diff --git a/target/linux/generic/patches-3.3/322-ppc4xx-crypto-compile-fix.patch b/target/linux/generic/patches-3.3/322-ppc4xx-crypto-compile-fix.patch deleted file mode 100644 index 226e41154c..0000000000 --- a/target/linux/generic/patches-3.3/322-ppc4xx-crypto-compile-fix.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/crypto/amcc/crypto4xx_core.c -+++ b/drivers/crypto/amcc/crypto4xx_core.c -@@ -19,6 +19,7 @@ - */ - - #include -+#include - #include - #include - #include diff --git a/target/linux/generic/patches-3.3/330-mips-add-crash-and-kdump-support.patch b/target/linux/generic/patches-3.3/330-mips-add-crash-and-kdump-support.patch deleted file mode 100644 index 7a79c4144c..0000000000 --- a/target/linux/generic/patches-3.3/330-mips-add-crash-and-kdump-support.patch +++ /dev/null @@ -1,616 +0,0 @@ -From eee16330c9de9adf7880cce9f1d32e13f89706bb Mon Sep 17 00:00:00 2001 -From: Wu Zhangjin -Date: Tue, 11 Jan 2011 13:16:47 +0000 -Subject: MIPS: Add crash and kdump support - -From: http://patchwork.linux-mips.org/patch/1025/ - -Hello folks, - -Please find here MIPS crash and kdump patches. -This is patch set of 3 patches: -1. generic MIPS changes (kernel); -2. MIPS Cavium Octeon board kexec/kdump code (kernel); -3. Kexec user space MIPS changes. - -Patches were tested on the latest linux-mips@ git kernel and the latest -kexec-tools git on Cavium Octeon 50xx board. - -I also made the same code working on RMI XLR/XLS boards for both -mips32 and mips64 kernels. - -Best regards, -Maxim Uvarov. - ------- -[ Zhangjin: Several trivial building failure has been fixed. - -Note: the 2nd patch can not be cleanly applied, but may be a good -reference for the other board development: - - + MIPS Cavium Octeon board kexec,kdump support - http://patchwork.linux-mips.org/patch/1026/ - -And the 3rd patch has already been merged into the mainline kexec-tools: - - + some kexec MIPS improvements - http://patchwork.linux-mips.org/patch/1027/ - -kexec-tools is available here: - - + http://horms.net/projects/kexec/ - git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git -] -Signed-off-by: Wu Zhangjin ---- -(limited to 'arch/mips/kernel') - ---- a/arch/mips/kernel/Makefile -+++ b/arch/mips/kernel/Makefile -@@ -97,7 +97,8 @@ obj-$(CONFIG_I8253) += i8253.o - - obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o - --obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o -+obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o -+obj-$(CONFIG_CRASH_DUMP) += crash_dump.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o - obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o ---- /dev/null -+++ b/arch/mips/kernel/crash.c -@@ -0,0 +1,75 @@ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_CRASH_DUMP -+unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX; -+#endif -+ -+/* This keeps a track of which one is crashing cpu. */ -+int crashing_cpu = -1; -+static cpumask_t cpus_in_crash = CPU_MASK_NONE; -+ -+#ifdef CONFIG_SMP -+void crash_shutdown_secondary(void *ignore) -+{ -+ struct pt_regs *regs; -+ int cpu = smp_processor_id(); -+ -+ regs = task_pt_regs(current); -+ -+ if (!cpu_online(cpu)) -+ return; -+ -+ local_irq_disable(); -+ if (!cpu_isset(cpu, cpus_in_crash)) -+ crash_save_cpu(regs, cpu); -+ cpu_set(cpu, cpus_in_crash); -+ -+ while (!atomic_read(&kexec_ready_to_reboot)) -+ cpu_relax(); -+ relocated_kexec_smp_wait(NULL); -+ /* NOTREACHED */ -+} -+ -+static void crash_kexec_prepare_cpus(void) -+{ -+ unsigned int msecs; -+ -+ unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */ -+ -+ dump_send_ipi(crash_shutdown_secondary); -+ smp_wmb(); -+ -+ /* -+ * The crash CPU sends an IPI and wait for other CPUs to -+ * respond. Delay of at least 10 seconds. -+ */ -+ printk(KERN_EMERG "Sending IPI to other cpus...\n"); -+ msecs = 10000; -+ while ((cpus_weight(cpus_in_crash) < ncpus) && (--msecs > 0)) { -+ cpu_relax(); -+ mdelay(1); -+ } -+} -+ -+#else -+static void crash_kexec_prepare_cpus(void) {} -+#endif -+ -+void default_machine_crash_shutdown(struct pt_regs *regs) -+{ -+ local_irq_disable(); -+ crashing_cpu = smp_processor_id(); -+ crash_save_cpu(regs, crashing_cpu); -+ crash_kexec_prepare_cpus(); -+ cpu_set(crashing_cpu, cpus_in_crash); -+} ---- /dev/null -+++ b/arch/mips/kernel/crash_dump.c -@@ -0,0 +1,86 @@ -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_PROC_VMCORE -+static int __init parse_elfcorehdr(char *p) -+{ -+ if (p) -+ elfcorehdr_addr = memparse(p, &p); -+ return 1; -+} -+__setup("elfcorehdr=", parse_elfcorehdr); -+#endif -+ -+static int __init parse_savemaxmem(char *p) -+{ -+ if (p) -+ saved_max_pfn = (memparse(p, &p) >> PAGE_SHIFT) - 1; -+ -+ return 1; -+} -+__setup("savemaxmem=", parse_savemaxmem); -+ -+ -+static void *kdump_buf_page; -+ -+/** -+ * copy_oldmem_page - copy one page from "oldmem" -+ * @pfn: page frame number to be copied -+ * @buf: target memory address for the copy; this can be in kernel address -+ * space or user address space (see @userbuf) -+ * @csize: number of bytes to copy -+ * @offset: offset in bytes into the page (based on pfn) to begin the copy -+ * @userbuf: if set, @buf is in user address space, use copy_to_user(), -+ * otherwise @buf is in kernel address space, use memcpy(). -+ * -+ * Copy a page from "oldmem". For this page, there is no pte mapped -+ * in the current kernel. -+ * -+ * Calling copy_to_user() in atomic context is not desirable. Hence first -+ * copying the data to a pre-allocated kernel page and then copying to user -+ * space in non-atomic context. -+ */ -+ssize_t copy_oldmem_page(unsigned long pfn, char *buf, -+ size_t csize, unsigned long offset, int userbuf) -+{ -+ void *vaddr; -+ -+ if (!csize) -+ return 0; -+ -+ vaddr = kmap_atomic_pfn(pfn, KM_PTE0); -+ -+ if (!userbuf) { -+ memcpy(buf, (vaddr + offset), csize); -+ kunmap_atomic(vaddr, KM_PTE0); -+ } else { -+ if (!kdump_buf_page) { -+ printk(KERN_WARNING "Kdump: Kdump buffer page not" -+ " allocated\n"); -+ return -EFAULT; -+ } -+ copy_page(kdump_buf_page, vaddr); -+ kunmap_atomic(vaddr, KM_PTE0); -+ if (copy_to_user(buf, (kdump_buf_page + offset), csize)) -+ return -EFAULT; -+ } -+ -+ return csize; -+} -+ -+static int __init kdump_buf_page_init(void) -+{ -+ int ret = 0; -+ -+ kdump_buf_page = kmalloc(PAGE_SIZE, GFP_KERNEL); -+ if (!kdump_buf_page) { -+ printk(KERN_WARNING "Kdump: Failed to allocate kdump buffer" -+ " page\n"); -+ ret = -ENOMEM; -+ } -+ -+ return ret; -+} -+arch_initcall(kdump_buf_page_init); ---- a/arch/mips/kernel/machine_kexec.c -+++ b/arch/mips/kernel/machine_kexec.c -@@ -19,9 +19,19 @@ extern const size_t relocate_new_kernel_ - extern unsigned long kexec_start_address; - extern unsigned long kexec_indirection_page; - -+int (*_machine_kexec_prepare)(struct kimage *) = NULL; -+void (*_machine_kexec_shutdown)(void) = NULL; -+void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL; -+#ifdef CONFIG_SMP -+void (*relocated_kexec_smp_wait) (void *); -+atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0); -+#endif -+ - int - machine_kexec_prepare(struct kimage *kimage) - { -+ if (_machine_kexec_prepare) -+ return _machine_kexec_prepare(kimage); - return 0; - } - -@@ -33,11 +43,17 @@ machine_kexec_cleanup(struct kimage *kim - void - machine_shutdown(void) - { -+ if (_machine_kexec_shutdown) -+ _machine_kexec_shutdown(); - } - - void - machine_crash_shutdown(struct pt_regs *regs) - { -+ if (_machine_crash_shutdown) -+ _machine_crash_shutdown(regs); -+ else -+ default_machine_crash_shutdown(regs); - } - - typedef void (*noretfun_t)(void) __attribute__((noreturn)); -@@ -52,7 +68,9 @@ machine_kexec(struct kimage *image) - reboot_code_buffer = - (unsigned long)page_address(image->control_code_page); - -- kexec_start_address = (unsigned long) phys_to_virt(image->start); -+ kexec_start_address = -+ (unsigned long) phys_to_virt(image->start); -+ - kexec_indirection_page = - (unsigned long) phys_to_virt(image->head & PAGE_MASK); - -@@ -63,7 +81,7 @@ machine_kexec(struct kimage *image) - * The generic kexec code builds a page list with physical - * addresses. they are directly accessible through KSEG0 (or - * CKSEG0 or XPHYS if on 64bit system), hence the -- * pys_to_virt() call. -+ * phys_to_virt() call. - */ - for (ptr = &image->head; (entry = *ptr) && !(entry &IND_DONE); - ptr = (entry & IND_INDIRECTION) ? -@@ -81,5 +99,13 @@ machine_kexec(struct kimage *image) - printk("Will call new kernel at %08lx\n", image->start); - printk("Bye ...\n"); - __flush_cache_all(); -+#ifdef CONFIG_SMP -+ /* All secondary cpus now may jump to kexec_wait cycle */ -+ relocated_kexec_smp_wait = reboot_code_buffer + -+ (void *)(kexec_smp_wait - relocate_new_kernel); -+ smp_wmb(); -+ atomic_set(&kexec_ready_to_reboot, 1); -+#endif - ((noretfun_t) reboot_code_buffer)(); - } -+ ---- a/arch/mips/kernel/relocate_kernel.S -+++ b/arch/mips/kernel/relocate_kernel.S -@@ -15,6 +15,11 @@ - #include - - LEAF(relocate_new_kernel) -+ PTR_L a0, arg0 -+ PTR_L a1, arg1 -+ PTR_L a2, arg2 -+ PTR_L a3, arg3 -+ - PTR_L s0, kexec_indirection_page - PTR_L s1, kexec_start_address - -@@ -26,7 +31,6 @@ process_entry: - and s3, s2, 0x1 - beq s3, zero, 1f - and s4, s2, ~0x1 /* store destination addr in s4 */ -- move a0, s4 - b process_entry - - 1: -@@ -60,23 +64,100 @@ copy_word: - b process_entry - - done: -+#ifdef CONFIG_SMP -+ /* kexec_flag reset is signal to other CPUs what kernel -+ was moved to it's location. Note - we need relocated address -+ of kexec_flag. */ -+ -+ bal 1f -+ 1: move t1,ra; -+ PTR_LA t2,1b -+ PTR_LA t0,kexec_flag -+ PTR_SUB t0,t0,t2; -+ PTR_ADD t0,t1,t0; -+ LONG_S zero,(t0) -+#endif -+ -+ sync - /* jump to kexec_start_address */ - j s1 - END(relocate_new_kernel) - --kexec_start_address: -- EXPORT(kexec_start_address) -+#ifdef CONFIG_SMP -+/* -+ * Other CPUs should wait until code is relocated and -+ * then start at entry (?) point. -+ */ -+LEAF(kexec_smp_wait) -+ PTR_L a0, s_arg0 -+ PTR_L a1, s_arg1 -+ PTR_L a2, s_arg2 -+ PTR_L a3, s_arg3 -+ PTR_L s1, kexec_start_address -+ -+ /* Non-relocated address works for args and kexec_start_address ( old -+ * kernel is not overwritten). But we need relocated address of -+ * kexec_flag. -+ */ -+ -+ bal 1f -+1: move t1,ra; -+ PTR_LA t2,1b -+ PTR_LA t0,kexec_flag -+ PTR_SUB t0,t0,t2; -+ PTR_ADD t0,t1,t0; -+ -+1: LONG_L s0, (t0) -+ bne s0, zero,1b -+ -+ sync -+ j s1 -+ END(kexec_smp_wait) -+#endif -+ -+#ifdef __mips64 -+ /* all PTR's must be aligned to 8 byte in 64-bit mode */ -+ .align 3 -+#endif -+ -+/* All parameters to new kernel are passed in registers a0-a3. -+ * kexec_args[0..3] are uses to prepare register values. -+ */ -+ -+EXPORT(kexec_args) -+arg0: PTR 0x0 -+arg1: PTR 0x0 -+arg2: PTR 0x0 -+arg3: PTR 0x0 -+ .size kexec_args,PTRSIZE*4 -+ -+#ifdef CONFIG_SMP -+/* -+ * Secondary CPUs may have different kernel parameters in -+ * their registers a0-a3. secondary_kexec_args[0..3] are used -+ * to prepare register values. -+ */ -+EXPORT(secondary_kexec_args) -+s_arg0: PTR 0x0 -+s_arg1: PTR 0x0 -+s_arg2: PTR 0x0 -+s_arg3: PTR 0x0 -+ .size secondary_kexec_args,PTRSIZE*4 -+kexec_flag: -+ LONG 0x1 -+ -+#endif -+ -+EXPORT(kexec_start_address) - PTR 0x0 - .size kexec_start_address, PTRSIZE - --kexec_indirection_page: -- EXPORT(kexec_indirection_page) -+EXPORT(kexec_indirection_page) - PTR 0 - .size kexec_indirection_page, PTRSIZE - - relocate_new_kernel_end: - --relocate_new_kernel_size: -- EXPORT(relocate_new_kernel_size) -+EXPORT(relocate_new_kernel_size) - PTR relocate_new_kernel_end - relocate_new_kernel - .size relocate_new_kernel_size, PTRSIZE ---- a/arch/mips/kernel/setup.c -+++ b/arch/mips/kernel/setup.c -@@ -22,6 +22,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -523,12 +524,62 @@ static void __init arch_mem_init(char ** - } - - bootmem_init(); -+#ifdef CONFIG_KEXEC -+ if (crashk_res.start != crashk_res.end) -+ reserve_bootmem(crashk_res.start, -+ crashk_res.end - crashk_res.start + 1, -+ BOOTMEM_DEFAULT); -+#endif - device_tree_init(); - sparse_init(); - plat_swiotlb_setup(); - paging_init(); - } - -+#ifdef CONFIG_KEXEC -+static inline unsigned long long get_total_mem(void) -+{ -+ unsigned long long total; -+ total = max_pfn - min_low_pfn; -+ return total << PAGE_SHIFT; -+} -+ -+static void __init mips_parse_crashkernel(void) -+{ -+ unsigned long long total_mem; -+ unsigned long long crash_size, crash_base; -+ int ret; -+ -+ total_mem = get_total_mem(); -+ ret = parse_crashkernel(boot_command_line, total_mem, -+ &crash_size, &crash_base); -+ if (ret != 0 || crash_size <= 0) -+ return; -+ -+ crashk_res.start = crash_base; -+ crashk_res.end = crash_base + crash_size - 1; -+} -+static void __init request_crashkernel(struct resource *res) -+{ -+ int ret; -+ -+ ret = request_resource(res, &crashk_res); -+ if (!ret) -+ printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " -+ "for crashkernel\n", -+ (unsigned long)((crashk_res.end - -+ crashk_res.start + 1) >> 20), -+ (unsigned long)(crashk_res.start >> 20)); -+} -+#else -+static void __init mips_parse_crashkernel(void) -+{ -+} -+static void __init request_crashkernel(struct resource *res) -+{ -+} -+#endif -+ - static void __init resource_init(void) - { - int i; -@@ -544,6 +595,8 @@ static void __init resource_init(void) - /* - * Request address space for all standard RAM. - */ -+ mips_parse_crashkernel(); -+ - for (i = 0; i < boot_mem_map.nr_map; i++) { - struct resource *res; - unsigned long start, end; -@@ -580,6 +633,7 @@ static void __init resource_init(void) - */ - request_resource(res, &code_resource); - request_resource(res, &data_resource); -+ request_crashkernel(res); - } - } - ---- a/arch/mips/kernel/smp.c -+++ b/arch/mips/kernel/smp.c -@@ -433,3 +433,21 @@ void flush_tlb_one(unsigned long vaddr) - - EXPORT_SYMBOL(flush_tlb_page); - EXPORT_SYMBOL(flush_tlb_one); -+ -+#if defined(CONFIG_KEXEC) -+void (*dump_ipi_function_ptr)(void *) = NULL; -+void dump_send_ipi(void (*dump_ipi_callback)(void *)) -+{ -+ int i; -+ int cpu = smp_processor_id(); -+ -+ dump_ipi_function_ptr = dump_ipi_callback; -+ smp_mb(); -+ for_each_online_cpu(i) -+ if (i != cpu) -+ core_send_ipi(i, SMP_DUMP); -+ -+} -+EXPORT_SYMBOL(dump_send_ipi); -+#endif -+ ---- a/arch/mips/include/asm/kexec.h -+++ b/arch/mips/include/asm/kexec.h -@@ -9,22 +9,45 @@ - #ifndef _MIPS_KEXEC - # define _MIPS_KEXEC - -+#include -+ -+extern unsigned long long elfcorehdr_addr; -+ - /* Maximum physical address we can use pages from */ - #define KEXEC_SOURCE_MEMORY_LIMIT (0x20000000) - /* Maximum address we can reach in physical address mode */ - #define KEXEC_DESTINATION_MEMORY_LIMIT (0x20000000) - /* Maximum address we can use for the control code buffer */ - #define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000) -- --#define KEXEC_CONTROL_PAGE_SIZE 4096 -+/* Reserve 3*4096 bytes for board-specific info */ -+#define KEXEC_CONTROL_PAGE_SIZE (4096 + 3*4096) - - /* The native architecture */ - #define KEXEC_ARCH KEXEC_ARCH_MIPS -+#define MAX_NOTE_BYTES 1024 - - static inline void crash_setup_regs(struct pt_regs *newregs, -- struct pt_regs *oldregs) -+ struct pt_regs *oldregs) - { -- /* Dummy implementation for now */ -+ if (oldregs) -+ memcpy(newregs, oldregs, sizeof(*newregs)); -+ else -+ prepare_frametrace(newregs); - } - -+#ifdef CONFIG_KEXEC -+struct kimage; -+extern unsigned long kexec_args[4]; -+extern int (*_machine_kexec_prepare)(struct kimage *); -+extern void (*_machine_kexec_shutdown)(void); -+extern void (*_machine_crash_shutdown)(struct pt_regs *regs); -+extern void default_machine_crash_shutdown(struct pt_regs *regs); -+#ifdef CONFIG_SMP -+extern const unsigned char kexec_smp_wait[]; -+extern unsigned long secondary_kexec_args[4]; -+extern void (*relocated_kexec_smp_wait) (void *); -+extern atomic_t kexec_ready_to_reboot; -+#endif -+#endif -+ - #endif /* !_MIPS_KEXEC */ ---- a/arch/mips/include/asm/smp.h -+++ b/arch/mips/include/asm/smp.h -@@ -40,6 +40,8 @@ extern int __cpu_logical_map[NR_CPUS]; - #define SMP_CALL_FUNCTION 0x2 - /* Octeon - Tell another core to flush its icache */ - #define SMP_ICACHE_FLUSH 0x4 -+/* Used by kexec crashdump to save all cpu's state */ -+#define SMP_DUMP 0x8 - - extern volatile cpumask_t cpu_callin_map; - -@@ -91,4 +93,9 @@ static inline void arch_send_call_functi - mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION); - } - -+extern void core_send_ipi(int cpu, unsigned int action); -+#if defined(CONFIG_KEXEC) -+extern void (*dump_ipi_function_ptr)(void *); -+void dump_send_ipi(void (*dump_ipi_callback)(void *)); -+#endif - #endif /* __ASM_SMP_H */ diff --git a/target/linux/generic/patches-3.3/331-mips-kexec-enhanche-the-support.patch b/target/linux/generic/patches-3.3/331-mips-kexec-enhanche-the-support.patch deleted file mode 100644 index 21bbeed554..0000000000 --- a/target/linux/generic/patches-3.3/331-mips-kexec-enhanche-the-support.patch +++ /dev/null @@ -1,157 +0,0 @@ -From 03cd81fbca6b91317ec1a7b3b3c09fb8d08f83a6 Mon Sep 17 00:00:00 2001 -From: Wu Zhangjin -Date: Tue, 11 Jan 2011 18:42:08 +0000 -Subject: MIPS: Kexec: Enhance the support - -Changes: - o Print more information in machine_kexec() for debugging - E.g. with this information, the kexec_start_address has been found - it was wrong with 64bit kernel / o32 kexec-tools. Which must be - fixed later. - o Link relocate_kernel.S to a section for future extension - This allows more functions can be added for the kexec relocation - part even written in C. to add code into that section, you just need - to mark your function or data with __kexec or - __attribute__((__section__(".__kexec.relocate"))) - -TODO: - -1. Make 64bit kernel / o32|n32|64 kexec-tools works - -Fix the user-space kexec-tools, seems the tool only work for 32bit -machine. So, we need to add 64bit support for it. The address of the -entry point(kexec_start_address) is wrong and make the "kexec -e" fail. -the real entry point must be read from the new kernel image by the -user-space kexec-tools, otherwise, it will not work. The above 64bit -support tested is 64bit kernel with o32 user-space kexec-tools. The root -cause may be the different definition of virt_to_phys() and -phys_to_virt() in the kexec-tools and kernel space for 64bit system / -o32 kernel. - -Ref: http://www.linux-mips.org/archives/linux-mips/2009-08/msg00149.html - -2. Pass the arguments from kexec-tools to the new kernel image - -Please refer to: "MIPS: Loongson: Kexec: Pass parameters to new kernel" - -Signed-off-by: Wu Zhangjin ---- ---- a/arch/mips/include/asm/kexec.h -+++ b/arch/mips/include/asm/kexec.h -@@ -36,6 +36,16 @@ static inline void crash_setup_regs(stru - } - - #ifdef CONFIG_KEXEC -+ -+#define __kexec __attribute__((__section__(".__kexec.relocate"))) -+ -+/* The linker tells us where the relocate_new_kernel part is. */ -+extern const unsigned char __start___kexec_relocate; -+extern const unsigned char __end___kexec_relocate; -+ -+extern unsigned long kexec_start_address; -+extern unsigned long kexec_indirection_page; -+ - struct kimage; - extern unsigned long kexec_args[4]; - extern int (*_machine_kexec_prepare)(struct kimage *); ---- a/arch/mips/kernel/machine_kexec.c -+++ b/arch/mips/kernel/machine_kexec.c -@@ -14,10 +14,6 @@ - #include - - extern const unsigned char relocate_new_kernel[]; --extern const size_t relocate_new_kernel_size; -- --extern unsigned long kexec_start_address; --extern unsigned long kexec_indirection_page; - - int (*_machine_kexec_prepare)(struct kimage *) = NULL; - void (*_machine_kexec_shutdown)(void) = NULL; -@@ -61,21 +57,34 @@ typedef void (*noretfun_t)(void) __attri - void - machine_kexec(struct kimage *image) - { -+ unsigned long kexec_relocate_size; - unsigned long reboot_code_buffer; - unsigned long entry; - unsigned long *ptr; - -+ kexec_relocate_size = (unsigned long)(&__end___kexec_relocate) - -+ (unsigned long)(&__start___kexec_relocate); -+ pr_info("kexec_relocate_size = %lu\n", kexec_relocate_size); -+ - reboot_code_buffer = - (unsigned long)page_address(image->control_code_page); -+ pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer); - - kexec_start_address = - (unsigned long) phys_to_virt(image->start); -+ pr_info("kexec_start_address(entry point of new kernel) = %p\n", -+ (void *)kexec_start_address); - - kexec_indirection_page = - (unsigned long) phys_to_virt(image->head & PAGE_MASK); -+ pr_info("kexec_indirection_page = %p\n", -+ (void *)kexec_indirection_page); - -- memcpy((void*)reboot_code_buffer, relocate_new_kernel, -- relocate_new_kernel_size); -+ memcpy((void *)reboot_code_buffer, &__start___kexec_relocate, -+ kexec_relocate_size); -+ -+ pr_info("Copy kexec_relocate section from %p to reboot_code_buffer: %p\n", -+ &__start___kexec_relocate, (void *)reboot_code_buffer); - - /* - * The generic kexec code builds a page list with physical -@@ -96,8 +105,8 @@ machine_kexec(struct kimage *image) - */ - local_irq_disable(); - -- printk("Will call new kernel at %08lx\n", image->start); -- printk("Bye ...\n"); -+ pr_info("Will call new kernel at %p\n", (void *)kexec_start_address); -+ pr_info("Bye ...\n"); - __flush_cache_all(); - #ifdef CONFIG_SMP - /* All secondary cpus now may jump to kexec_wait cycle */ -@@ -108,4 +117,3 @@ machine_kexec(struct kimage *image) - #endif - ((noretfun_t) reboot_code_buffer)(); - } -- ---- a/arch/mips/kernel/relocate_kernel.S -+++ b/arch/mips/kernel/relocate_kernel.S -@@ -14,6 +14,8 @@ - #include - #include - -+ .section .kexec.relocate, "ax" -+ - LEAF(relocate_new_kernel) - PTR_L a0, arg0 - PTR_L a1, arg1 -@@ -155,9 +157,3 @@ EXPORT(kexec_start_address) - EXPORT(kexec_indirection_page) - PTR 0 - .size kexec_indirection_page, PTRSIZE -- --relocate_new_kernel_end: -- --EXPORT(relocate_new_kernel_size) -- PTR relocate_new_kernel_end - relocate_new_kernel -- .size relocate_new_kernel_size, PTRSIZE ---- a/arch/mips/kernel/vmlinux.lds.S -+++ b/arch/mips/kernel/vmlinux.lds.S -@@ -50,6 +50,10 @@ SECTIONS - *(.text.*) - *(.fixup) - *(.gnu.warning) -+ __start___kexec_relocate = .; -+ KEEP(*(.kexec.relocate)) -+ KEEP(*(.__kexec.relocate)) -+ __end___kexec_relocate = .; - } :text = 0 - _etext = .; /* End of text section */ - diff --git a/target/linux/generic/patches-3.3/332-mips-kexec-init-the-arguments-for-the-new-kernel-image.patch b/target/linux/generic/patches-3.3/332-mips-kexec-init-the-arguments-for-the-new-kernel-image.patch deleted file mode 100644 index 07d0af9e71..0000000000 --- a/target/linux/generic/patches-3.3/332-mips-kexec-init-the-arguments-for-the-new-kernel-image.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 49d07a29653b1f2c6ae273b3d8fe93d981f43004 Mon Sep 17 00:00:00 2001 -From: Wu Zhangjin -Date: Wed, 12 Jan 2011 20:59:32 +0000 -Subject: MIPS: Kexec: Init the arguments for the new kernel image - -Whenever the kexec-tools pass the command lines to the new kernel image, -init the arguments as the ones for the 1st kernel image. This fixed the -booting failure of Kexec on YeeLoong. - -Signed-off-by: Wu Zhangjin ---- ---- a/arch/mips/kernel/machine_kexec.c -+++ b/arch/mips/kernel/machine_kexec.c -@@ -10,6 +10,7 @@ - #include - #include - -+#include - #include - #include - -@@ -23,9 +24,30 @@ void (*relocated_kexec_smp_wait) (void * - atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0); - #endif - -+static void machine_kexec_init_args(void) -+{ -+ kexec_args[0] = fw_arg0; -+ kexec_args[1] = fw_arg1; -+ kexec_args[2] = fw_arg2; -+ kexec_args[3] = fw_arg3; -+ -+ pr_info("kexec_args[0] (argc): %lu\n", kexec_args[0]); -+ pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]); -+ pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]); -+ pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]); -+} -+ - int - machine_kexec_prepare(struct kimage *kimage) - { -+ /* -+ * Whenever arguments passed from kexec-tools, Init the arguments as -+ * the original ones to avoid booting failure. -+ * -+ * This can be overrided by _machine_kexec_prepare(). -+ */ -+ machine_kexec_init_args(); -+ - if (_machine_kexec_prepare) - return _machine_kexec_prepare(kimage); - return 0; diff --git a/target/linux/generic/patches-3.3/333-mips-kexec-get-kernel-parameters-from-kexec-tools.patch b/target/linux/generic/patches-3.3/333-mips-kexec-get-kernel-parameters-from-kexec-tools.patch deleted file mode 100644 index 44380dae6f..0000000000 --- a/target/linux/generic/patches-3.3/333-mips-kexec-get-kernel-parameters-from-kexec-tools.patch +++ /dev/null @@ -1,88 +0,0 @@ -From 240c76841b26f1b09aaced33414ee1d08b6454cf Mon Sep 17 00:00:00 2001 -From: Wu Zhangjin -Date: Sat, 15 Jan 2011 12:46:03 +0000 -Subject: MIPS: Get kernel parameters from kexec-tools - -Before, we simply use the command lines from the original bootloader, -but it is not convenient. Now, we accept the kernel parameters from the ---command-line or --append option of the kexec-tools. But If not ---command-line or --apend option indicated, will fall back to use the -ones from the original bootloader. - -Signed-off-by: Wu Zhangjin ---- ---- a/arch/mips/kernel/machine_kexec.c -+++ b/arch/mips/kernel/machine_kexec.c -@@ -13,6 +13,7 @@ - #include - #include - #include -+#include - - extern const unsigned char relocate_new_kernel[]; - -@@ -37,6 +38,56 @@ static void machine_kexec_init_args(void - pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]); - } - -+#define ARGV_MAX_ARGS (COMMAND_LINE_SIZE / 15) -+ -+int machine_kexec_pass_args(struct kimage *image) -+{ -+ int i, argc = 0; -+ char *bootloader = "kexec"; -+ int *kexec_argv = (int *)kexec_args[1]; -+ -+ for (i = 0; i < image->nr_segments; i++) { -+ if (!strncmp(bootloader, (char *)image->segment[i].buf, -+ strlen(bootloader))) { -+ /* -+ * convert command line string to array -+ * of parameters (as bootloader does). -+ */ -+ /* -+ * Note: we do treat the 1st string "kexec" as an -+ * argument ;-) so, argc here is 1. -+ */ -+ char *str = (char *)image->segment[i].buf; -+ char *ptr = strchr(str, ' '); -+ char *kbuf = (char *)kexec_argv[0]; -+ /* Whenever --command-line or --append used, "kexec" is copied */ -+ argc = 1; -+ /* Parse the offset */ -+ while (ptr && (ARGV_MAX_ARGS > argc)) { -+ *ptr = '\0'; -+ if (ptr[1] != ' ' && ptr[1] != '\0') { -+ int offt = (int)(ptr - str + 1); -+ kexec_argv[argc] = (int)kbuf + offt; -+ argc++; -+ } -+ ptr = strchr(ptr + 1, ' '); -+ } -+ if (argc > 1) { -+ /* Copy to kernel space */ -+ copy_from_user(kbuf, (char *)image->segment[i].buf, image->segment[i].bufsz); -+ fw_arg0 = kexec_args[0] = argc; -+ } -+ break; -+ } -+ } -+ -+ pr_info("argc = %lu\n", kexec_args[0]); -+ for (i = 0; i < kexec_args[0]; i++) -+ pr_info("argv[%d] = %p, %s\n", i, (char *)kexec_argv[i], (char *)kexec_argv[i]); -+ -+ return 0; -+} -+ - int - machine_kexec_prepare(struct kimage *kimage) - { -@@ -47,6 +98,7 @@ machine_kexec_prepare(struct kimage *kim - * This can be overrided by _machine_kexec_prepare(). - */ - machine_kexec_init_args(); -+ machine_kexec_pass_args(kimage); - - if (_machine_kexec_prepare) - return _machine_kexec_prepare(kimage); diff --git a/target/linux/generic/patches-3.3/334-mips-fix-compiling-failure-of-relocate_kernel.patch b/target/linux/generic/patches-3.3/334-mips-fix-compiling-failure-of-relocate_kernel.patch deleted file mode 100644 index 46a7395d5d..0000000000 --- a/target/linux/generic/patches-3.3/334-mips-fix-compiling-failure-of-relocate_kernel.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 4aded085fa0057a9a1e1dcec631f950307360c1f Mon Sep 17 00:00:00 2001 -From: Wu Zhangjin -Date: Tue, 11 Jan 2011 13:46:19 +0000 -Subject: MIPS: Fix compiling failure of relocate_kernel.S - -The following errors is fixed with the help of . for -this file need to put different symbols in the same section, the -original LEAF, NESTED and EXPORT (without explicit section indication) -must be used, does it. - -arch/mips/kernel/relocate_kernel.S: Assembler messages: -arch/mips/kernel/relocate_kernel.S:162: Error: operation combines symbols in different segments - -Signed-off-by: Wu Zhangjin ---- -(limited to 'arch/mips/kernel') - ---- a/arch/mips/kernel/relocate_kernel.S -+++ b/arch/mips/kernel/relocate_kernel.S -@@ -7,6 +7,7 @@ - */ - - #include -+#include - #include - #include - #include ---- /dev/null -+++ b/arch/mips/include/asm/asm_nosec.h -@@ -0,0 +1,53 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle -+ * Copyright (C) 1999 by Silicon Graphics, Inc. -+ * Copyright (C) 2001 MIPS Technologies, Inc. -+ * Copyright (C) 2002 Maciej W. Rozycki -+ * Copyright (C) 2010 Wu Zhangjin -+ * -+ * Derive from -+ * -+ * Override the macros without -ffunction-sections and -fdata-sections support. -+ * If several functions or data must be put in the same section, please include -+ * this header file after the to override the generic definition. -+ */ -+ -+#ifndef __ASM_ASM_NOSEC_H -+#define __ASM_ASM_NOSEC_H -+ -+#undef LEAF -+#undef NESTED -+#undef EXPORT -+ -+/* -+ * LEAF - declare leaf routine -+ */ -+#define LEAF(symbol) \ -+ .globl symbol; \ -+ .align 2; \ -+ .type symbol, @function; \ -+ .ent symbol, 0; \ -+symbol: .frame sp, 0, ra -+ -+/* -+ * NESTED - declare nested routine entry point -+ */ -+#define NESTED(symbol, framesize, rpc) \ -+ .globl symbol; \ -+ .align 2; \ -+ .type symbol, @function; \ -+ .ent symbol, 0; \ -+symbol: .frame sp, framesize, rpc -+ -+/* -+ * EXPORT - export definition of symbol -+ */ -+#define EXPORT(symbol) \ -+ .globl symbol; \ -+symbol: -+ -+#endif /* __ASM_ASM_NOSEC_H */ diff --git a/target/linux/generic/patches-3.3/335-mips-kexec-cleanup-kexec-tools-parameter-handling.patch b/target/linux/generic/patches-3.3/335-mips-kexec-cleanup-kexec-tools-parameter-handling.patch deleted file mode 100644 index e0a1103eb6..0000000000 --- a/target/linux/generic/patches-3.3/335-mips-kexec-cleanup-kexec-tools-parameter-handling.patch +++ /dev/null @@ -1,186 +0,0 @@ ---- a/arch/mips/kernel/machine_kexec.c -+++ b/arch/mips/kernel/machine_kexec.c -@@ -25,67 +25,104 @@ void (*relocated_kexec_smp_wait) (void * - atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0); - #endif - --static void machine_kexec_init_args(void) -+#define KEXEC_MIPS_ARGV_BUF_SIZE COMMAND_LINE_SIZE -+#define KEXEC_MIPS_ARGV_MAX_ARGS (COMMAND_LINE_SIZE / 15) -+ -+char kexec_argv_buf[KEXEC_MIPS_ARGV_BUF_SIZE] __kexec; -+char *kexec_argv[KEXEC_MIPS_ARGV_MAX_ARGS] __kexec; -+ -+static void -+machine_kexec_print_args(void) - { -- kexec_args[0] = fw_arg0; -- kexec_args[1] = fw_arg1; -- kexec_args[2] = fw_arg2; -- kexec_args[3] = fw_arg3; -+ int i; - - pr_info("kexec_args[0] (argc): %lu\n", kexec_args[0]); - pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]); - pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]); - pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]); --} - --#define ARGV_MAX_ARGS (COMMAND_LINE_SIZE / 15) -+ for (i = 0; i < kexec_args[0]; i++) -+ pr_info("kexec_argv[%d] = %p, %s\n", i, -+ (char *)kexec_argv[i], (char *)kexec_argv[i]); -+} - --int machine_kexec_pass_args(struct kimage *image) -+static void -+machine_kexec_init_argv(struct kimage *image) - { -- int i, argc = 0; -- char *bootloader = "kexec"; -- int *kexec_argv = (int *)kexec_args[1]; -+ void __user *buf = NULL; -+ size_t bufsz; -+ size_t size; -+ int i; - -+ bufsz = 0; - for (i = 0; i < image->nr_segments; i++) { -- if (!strncmp(bootloader, (char *)image->segment[i].buf, -- strlen(bootloader))) { -- /* -- * convert command line string to array -- * of parameters (as bootloader does). -- */ -- /* -- * Note: we do treat the 1st string "kexec" as an -- * argument ;-) so, argc here is 1. -- */ -- char *str = (char *)image->segment[i].buf; -- char *ptr = strchr(str, ' '); -- char *kbuf = (char *)kexec_argv[0]; -- /* Whenever --command-line or --append used, "kexec" is copied */ -- argc = 1; -- /* Parse the offset */ -- while (ptr && (ARGV_MAX_ARGS > argc)) { -- *ptr = '\0'; -- if (ptr[1] != ' ' && ptr[1] != '\0') { -- int offt = (int)(ptr - str + 1); -- kexec_argv[argc] = (int)kbuf + offt; -- argc++; -- } -- ptr = strchr(ptr + 1, ' '); -- } -- if (argc > 1) { -- /* Copy to kernel space */ -- copy_from_user(kbuf, (char *)image->segment[i].buf, image->segment[i].bufsz); -- fw_arg0 = kexec_args[0] = argc; -- } -- break; -+ struct kexec_segment *seg; -+ -+ seg = &image->segment[i]; -+ if (seg->bufsz < 6) -+ continue; -+ -+ if (strncmp((char *) seg->buf, "kexec", 5)) -+ continue; -+ -+ /* don't copy "kexec" */ -+ buf = seg->buf + 5; -+ bufsz = seg->bufsz - 5; -+ break; -+ } -+ -+ if (!buf) -+ return; -+ -+ size = KEXEC_MIPS_ARGV_BUF_SIZE - 1; -+ size = min(size, bufsz); -+ if (size < bufsz) -+ pr_warn("kexec command line truncated to %zd bytes\n", size); -+ -+ /* Copy to kernel space */ -+ copy_from_user(kexec_argv_buf, buf, size); -+} -+ -+static void -+machine_kexec_parse_argv(struct kimage *image) -+{ -+ char *reboot_code_buffer; -+ int reloc_delta; -+ char *ptr; -+ int argc; -+ int i; -+ -+ ptr = kexec_argv_buf; -+ argc = 0; -+ -+ /* -+ * convert command line string to array of parameters -+ * (as bootloader does). -+ */ -+ while (ptr && *ptr && (KEXEC_MIPS_ARGV_MAX_ARGS > argc)) { -+ if (*ptr == ' ') { -+ *ptr++ = '\0'; -+ continue; - } -+ -+ kexec_argv[argc++] = ptr; -+ ptr = strchr(ptr, ' '); - } - -- pr_info("argc = %lu\n", kexec_args[0]); -- for (i = 0; i < kexec_args[0]; i++) -- pr_info("argv[%d] = %p, %s\n", i, (char *)kexec_argv[i], (char *)kexec_argv[i]); -+ if (!argc) -+ return; - -- return 0; -+ kexec_args[0] = argc; -+ kexec_args[1] = (unsigned long)kexec_argv; -+ kexec_args[2] = 0; -+ kexec_args[3] = 0; -+ -+ reboot_code_buffer = page_address(image->control_code_page); -+ reloc_delta = reboot_code_buffer - (char *) &__start___kexec_relocate; -+ -+ kexec_args[1] += reloc_delta; -+ for (i = 0; i < argc; i++) -+ kexec_argv[i] += reloc_delta; - } - - int -@@ -97,8 +134,14 @@ machine_kexec_prepare(struct kimage *kim - * - * This can be overrided by _machine_kexec_prepare(). - */ -- machine_kexec_init_args(); -- machine_kexec_pass_args(kimage); -+ -+ kexec_args[0] = fw_arg0; -+ kexec_args[1] = fw_arg1; -+ kexec_args[2] = fw_arg2; -+ kexec_args[3] = fw_arg3; -+ -+ machine_kexec_init_argv(kimage); -+ machine_kexec_parse_argv(kimage); - - if (_machine_kexec_prepare) - return _machine_kexec_prepare(kimage); -@@ -154,11 +197,13 @@ machine_kexec(struct kimage *image) - pr_info("kexec_indirection_page = %p\n", - (void *)kexec_indirection_page); - -+ pr_info("Copy kexec_relocate section from %p to reboot_code_buffer: %p\n", -+ &__start___kexec_relocate, (void *)reboot_code_buffer); -+ - memcpy((void *)reboot_code_buffer, &__start___kexec_relocate, - kexec_relocate_size); - -- pr_info("Copy kexec_relocate section from %p to reboot_code_buffer: %p\n", -- &__start___kexec_relocate, (void *)reboot_code_buffer); -+ machine_kexec_print_args(); - - /* - * The generic kexec code builds a page list with physical diff --git a/target/linux/generic/patches-3.3/340-module_alloc_size_check.patch b/target/linux/generic/patches-3.3/340-module_alloc_size_check.patch deleted file mode 100644 index 549df5a667..0000000000 --- a/target/linux/generic/patches-3.3/340-module_alloc_size_check.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/kernel/module.c -+++ b/kernel/module.c -@@ -2322,12 +2322,15 @@ static void dynamic_debug_remove(struct - - void * __weak module_alloc(unsigned long size) - { -- return size == 0 ? NULL : vmalloc_exec(size); -+ return vmalloc_exec(size); - } - - static void *module_alloc_update_bounds(unsigned long size) - { -- void *ret = module_alloc(size); -+ void *ret = NULL; -+ -+ if (size) -+ ret = module_alloc(size); - - if (ret) { - mutex_lock(&module_mutex); diff --git a/target/linux/generic/patches-3.3/400-rootfs_split.patch b/target/linux/generic/patches-3.3/400-rootfs_split.patch deleted file mode 100644 index 349185a30d..0000000000 --- a/target/linux/generic/patches-3.3/400-rootfs_split.patch +++ /dev/null @@ -1,327 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -23,6 +23,14 @@ config MTD_TESTS - WARNING: some of the tests will ERASE entire MTD device which they - test. Do not use these tests unless you really know what you do. - -+config MTD_ROOTFS_ROOT_DEV -+ bool "Automatically set 'rootfs' partition to be root filesystem" -+ default y -+ -+config MTD_ROOTFS_SPLIT -+ bool "Automatically split 'rootfs' partition for squashfs" -+ default y -+ - config MTD_REDBOOT_PARTS - tristate "RedBoot partition table parsing" - ---help--- ---- a/drivers/mtd/mtdpart.c -+++ b/drivers/mtd/mtdpart.c -@@ -29,6 +29,8 @@ - #include - #include - #include -+#include -+#include - #include - - #include "mtdcore.h" -@@ -50,7 +52,7 @@ struct mtd_part { - * the pointer to that structure with this macro. - */ - #define PART(x) ((struct mtd_part *)(x)) -- -+#define IS_PART(mtd) (mtd->read == part_read) - - /* - * MTD methods which simply translate the effective address and pass through -@@ -643,6 +645,155 @@ int mtd_del_partition(struct mtd_info *m - } - EXPORT_SYMBOL_GPL(mtd_del_partition); - -+#ifdef CONFIG_MTD_ROOTFS_SPLIT -+#define ROOTFS_SPLIT_NAME "rootfs_data" -+#define ROOTFS_REMOVED_NAME "" -+ -+struct squashfs_super_block { -+ __le32 s_magic; -+ __le32 pad0[9]; -+ __le64 bytes_used; -+}; -+ -+ -+static int split_squashfs(struct mtd_info *master, int offset, int *split_offset) -+{ -+ struct squashfs_super_block sb; -+ int len, ret; -+ -+ ret = master->read(master, offset, sizeof(sb), &len, (void *) &sb); -+ if (ret || (len != sizeof(sb))) { -+ printk(KERN_ALERT "split_squashfs: error occured while reading " -+ "from \"%s\"\n", master->name); -+ return -EINVAL; -+ } -+ -+ if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) { -+ printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n", -+ master->name); -+ *split_offset = 0; -+ return 0; -+ } -+ -+ if (le64_to_cpu((sb.bytes_used)) <= 0) { -+ printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n", -+ master->name); -+ *split_offset = 0; -+ return 0; -+ } -+ -+ len = (u32) le64_to_cpu(sb.bytes_used); -+ len += (offset & 0x000fffff); -+ len += (master->erasesize - 1); -+ len &= ~(master->erasesize - 1); -+ len -= (offset & 0x000fffff); -+ *split_offset = offset + len; -+ -+ return 0; -+} -+ -+static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part) -+{ -+ struct mtd_partition *dpart; -+ struct mtd_part *slave = NULL; -+ struct mtd_part *spart; -+ int ret, split_offset = 0; -+ -+ spart = PART(rpart); -+ ret = split_squashfs(master, spart->offset, &split_offset); -+ if (ret) -+ return ret; -+ -+ if (split_offset <= 0) -+ return 0; -+ -+ dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL); -+ if (dpart == NULL) { -+ printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n", -+ ROOTFS_SPLIT_NAME); -+ return -ENOMEM; -+ } -+ -+ memcpy(dpart, part, sizeof(*part)); -+ dpart->name = (unsigned char *)&dpart[1]; -+ strcpy(dpart->name, ROOTFS_SPLIT_NAME); -+ -+ dpart->size = rpart->size - (split_offset - spart->offset); -+ dpart->offset = split_offset; -+ -+ if (dpart == NULL) -+ return 1; -+ -+ printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n", -+ ROOTFS_SPLIT_NAME, dpart->offset, dpart->size); -+ -+ slave = allocate_partition(master, dpart, 0, split_offset); -+ if (IS_ERR(slave)) -+ return PTR_ERR(slave); -+ mutex_lock(&mtd_partitions_mutex); -+ list_add(&slave->list, &mtd_partitions); -+ mutex_unlock(&mtd_partitions_mutex); -+ -+ add_mtd_device(&slave->mtd); -+ -+ rpart->split = &slave->mtd; -+ -+ return 0; -+} -+ -+static int refresh_rootfs_split(struct mtd_info *mtd) -+{ -+ struct mtd_partition tpart; -+ struct mtd_part *part; -+ char *name; -+ //int index = 0; -+ int offset, size; -+ int ret; -+ -+ part = PART(mtd); -+ -+ /* check for the new squashfs offset first */ -+ ret = split_squashfs(part->master, part->offset, &offset); -+ if (ret) -+ return ret; -+ -+ if ((offset > 0) && !mtd->split) { -+ printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name); -+ /* if we don't have a rootfs split partition, create a new one */ -+ tpart.name = (char *) mtd->name; -+ tpart.size = mtd->size; -+ tpart.offset = part->offset; -+ -+ return split_rootfs_data(part->master, &part->mtd, &tpart); -+ } else if ((offset > 0) && mtd->split) { -+ /* update the offsets of the existing partition */ -+ size = mtd->size + part->offset - offset; -+ -+ part = PART(mtd->split); -+ part->offset = offset; -+ part->mtd.size = size; -+ printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n", -+ __func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"), -+ (u32) part->offset, (u32) part->mtd.size); -+ name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL); -+ strcpy(name, ROOTFS_SPLIT_NAME); -+ part->mtd.name = name; -+ } else if ((offset <= 0) && mtd->split) { -+ printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name); -+ -+ /* mark existing partition as removed */ -+ part = PART(mtd->split); -+ name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL); -+ strcpy(name, ROOTFS_REMOVED_NAME); -+ part->mtd.name = name; -+ part->offset = 0; -+ part->mtd.size = 0; -+ } -+ -+ return 0; -+} -+#endif /* CONFIG_MTD_ROOTFS_SPLIT */ -+ - /* - * This function, given a master MTD object and a partition table, creates - * and registers slave MTD objects which are bound to the master according to -@@ -659,6 +810,9 @@ int add_mtd_partitions(struct mtd_info * - struct mtd_part *slave; - uint64_t cur_offset = 0; - int i; -+#ifdef CONFIG_MTD_ROOTFS_SPLIT -+ int ret; -+#endif - - printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name); - -@@ -673,12 +827,53 @@ int add_mtd_partitions(struct mtd_info * - - add_mtd_device(&slave->mtd); - -+ if (!strcmp(parts[i].name, "rootfs")) { -+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV -+ if (ROOT_DEV == 0) { -+ printk(KERN_NOTICE "mtd: partition \"rootfs\" " -+ "set to be root filesystem\n"); -+ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index); -+ } -+#endif -+#ifdef CONFIG_MTD_ROOTFS_SPLIT -+ ret = split_rootfs_data(master, &slave->mtd, &parts[i]); -+ /* if (ret == 0) -+ * j++; */ -+#endif -+ } -+ - cur_offset = slave->offset + slave->mtd.size; - } - - return 0; - } - -+int mtd_device_refresh(struct mtd_info *mtd) -+{ -+ int ret = 0; -+ -+ if (IS_PART(mtd)) { -+ struct mtd_part *part; -+ struct mtd_info *master; -+ -+ part = PART(mtd); -+ master = part->master; -+ if (master->refresh_device) -+ ret = master->refresh_device(master); -+ } -+ -+ if (!ret && mtd->refresh_device) -+ ret = mtd->refresh_device(mtd); -+ -+#ifdef CONFIG_MTD_ROOTFS_SPLIT -+ if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs")) -+ refresh_rootfs_split(mtd); -+#endif -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(mtd_device_refresh); -+ - static DEFINE_SPINLOCK(part_parser_lock); - static LIST_HEAD(part_parsers); - ---- a/drivers/mtd/mtdchar.c -+++ b/drivers/mtd/mtdchar.c -@@ -1005,6 +1005,12 @@ static int mtdchar_ioctl(struct file *fi - break; - } - -+ case MTDREFRESH: -+ { -+ ret = mtd_device_refresh(mtd); -+ break; -+ } -+ - default: - ret = -ENOTTY; - } ---- a/include/linux/mtd/mtd.h -+++ b/include/linux/mtd/mtd.h -@@ -114,6 +114,7 @@ struct nand_ecclayout { - - struct module; /* only needed for owner field in mtd_info */ - -+struct mtd_info; - struct mtd_info { - u_char type; - uint32_t flags; -@@ -214,6 +215,9 @@ struct mtd_info { - int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); - int (*suspend) (struct mtd_info *mtd); - void (*resume) (struct mtd_info *mtd); -+ int (*refresh_device)(struct mtd_info *mtd); -+ struct mtd_info *split; -+ - /* - * If the driver is something smart, like UBI, it may need to maintain - * its own reference counting. The below functions are only for driver. -@@ -502,6 +506,7 @@ extern int mtd_device_parse_register(str - int defnr_parts); - #define mtd_device_register(master, parts, nr_parts) \ - mtd_device_parse_register(master, NULL, NULL, parts, nr_parts) -+extern int mtd_device_refresh(struct mtd_info *master); - extern int mtd_device_unregister(struct mtd_info *master); - extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); - extern int __get_mtd_device(struct mtd_info *mtd); ---- a/include/linux/mtd/partitions.h -+++ b/include/linux/mtd/partitions.h -@@ -36,12 +36,14 @@ - * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK). - */ - -+struct mtd_partition; - struct mtd_partition { - char *name; /* identifier string */ - uint64_t size; /* partition size */ - uint64_t offset; /* offset within the master MTD space */ - uint32_t mask_flags; /* master MTD flags to mask out for this partition */ - struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only) */ -+ int (*refresh_partition)(struct mtd_info *); - }; - - #define MTDPART_OFS_RETAIN (-3) ---- a/include/mtd/mtd-abi.h -+++ b/include/mtd/mtd-abi.h -@@ -202,6 +202,7 @@ struct otp_info { - * without OOB, e.g., NOR flash. - */ - #define MEMWRITE _IOWR('M', 24, struct mtd_write_req) -+#define MTDREFRESH _IO('M', 50) - - /* - * Obsolete legacy interface. Keep it in order not to break userspace diff --git a/target/linux/generic/patches-3.3/401-partial_eraseblock_write.patch b/target/linux/generic/patches-3.3/401-partial_eraseblock_write.patch deleted file mode 100644 index f9c1c5ea6d..0000000000 --- a/target/linux/generic/patches-3.3/401-partial_eraseblock_write.patch +++ /dev/null @@ -1,146 +0,0 @@ ---- a/drivers/mtd/mtdpart.c -+++ b/drivers/mtd/mtdpart.c -@@ -35,6 +35,8 @@ - - #include "mtdcore.h" - -+#define MTD_ERASE_PARTIAL 0x8000 /* partition only covers parts of an erase block */ -+ - /* Our partition linked list */ - static LIST_HEAD(mtd_partitions); - static DEFINE_MUTEX(mtd_partitions_mutex); -@@ -252,13 +254,61 @@ static int part_erase(struct mtd_info *m - return -EROFS; - if (instr->addr >= mtd->size) - return -EINVAL; -+ -+ instr->partial_start = false; -+ if (mtd->flags & MTD_ERASE_PARTIAL) { -+ size_t readlen = 0; -+ u64 mtd_ofs; -+ -+ instr->erase_buf = kmalloc(part->master->erasesize, GFP_ATOMIC); -+ if (!instr->erase_buf) -+ return -ENOMEM; -+ -+ mtd_ofs = part->offset + instr->addr; -+ instr->erase_buf_ofs = do_div(mtd_ofs, part->master->erasesize); -+ -+ if (instr->erase_buf_ofs > 0) { -+ instr->addr -= instr->erase_buf_ofs; -+ ret = mtd_read(part->master, -+ instr->addr + part->offset, -+ part->master->erasesize, -+ &readlen, instr->erase_buf); -+ -+ instr->len += instr->erase_buf_ofs; -+ instr->partial_start = true; -+ } else { -+ mtd_ofs = part->offset + part->mtd.size; -+ instr->erase_buf_ofs = part->master->erasesize - -+ do_div(mtd_ofs, part->master->erasesize); -+ -+ if (instr->erase_buf_ofs > 0) { -+ instr->len += instr->erase_buf_ofs; -+ ret = mtd_read(part->master, -+ part->offset + instr->addr + -+ instr->len - part->master->erasesize, -+ part->master->erasesize, &readlen, -+ instr->erase_buf); -+ } else { -+ ret = 0; -+ } -+ } -+ if (ret < 0) { -+ kfree(instr->erase_buf); -+ return ret; -+ } -+ -+ } -+ - instr->addr += part->offset; - ret = mtd_erase(part->master, instr); - if (ret) { - if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN) - instr->fail_addr -= part->offset; - instr->addr -= part->offset; -+ if (mtd->flags & MTD_ERASE_PARTIAL) -+ kfree(instr->erase_buf); - } -+ - return ret; - } - -@@ -266,7 +316,25 @@ void mtd_erase_callback(struct erase_inf - { - if (instr->mtd->erase == part_erase) { - struct mtd_part *part = PART(instr->mtd); -+ size_t wrlen = 0; - -+ if (instr->mtd->flags & MTD_ERASE_PARTIAL) { -+ if (instr->partial_start) { -+ part->master->write(part->master, -+ instr->addr, instr->erase_buf_ofs, -+ &wrlen, instr->erase_buf); -+ instr->addr += instr->erase_buf_ofs; -+ } else { -+ instr->len -= instr->erase_buf_ofs; -+ part->master->write(part->master, -+ instr->addr + instr->len, -+ instr->erase_buf_ofs, &wrlen, -+ instr->erase_buf + -+ part->master->erasesize - -+ instr->erase_buf_ofs); -+ } -+ kfree(instr->erase_buf); -+ } - if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN) - instr->fail_addr -= part->offset; - instr->addr -= part->offset; -@@ -537,18 +605,24 @@ static struct mtd_part *allocate_partiti - if ((slave->mtd.flags & MTD_WRITEABLE) && - mtd_mod_by_eb(slave->offset, &slave->mtd)) { - /* Doesn't start on a boundary of major erase size */ -- /* FIXME: Let it be writable if it is on a boundary of -- * _minor_ erase size though */ -- slave->mtd.flags &= ~MTD_WRITEABLE; -- printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n", -- part->name); -+ slave->mtd.flags |= MTD_ERASE_PARTIAL; -+ if (((u32) slave->mtd.size) > master->erasesize) -+ slave->mtd.flags &= ~MTD_WRITEABLE; -+ else -+ slave->mtd.erasesize = slave->mtd.size; - } - if ((slave->mtd.flags & MTD_WRITEABLE) && -- mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) { -- slave->mtd.flags &= ~MTD_WRITEABLE; -- printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n", -- part->name); -+ mtd_mod_by_eb(slave->offset + slave->mtd.size, &slave->mtd)) { -+ slave->mtd.flags |= MTD_ERASE_PARTIAL; -+ -+ if ((u32) slave->mtd.size > master->erasesize) -+ slave->mtd.flags &= ~MTD_WRITEABLE; -+ else -+ slave->mtd.erasesize = slave->mtd.size; - } -+ if ((slave->mtd.flags & (MTD_ERASE_PARTIAL|MTD_WRITEABLE)) == MTD_ERASE_PARTIAL) -+ printk(KERN_WARNING"mtd: partition \"%s\" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only\n", -+ part->name); - - slave->mtd.ecclayout = master->ecclayout; - if (master->block_isbad) { ---- a/include/linux/mtd/mtd.h -+++ b/include/linux/mtd/mtd.h -@@ -58,6 +58,10 @@ struct erase_info { - u_long priv; - u_char state; - struct erase_info *next; -+ -+ u8 *erase_buf; -+ u32 erase_buf_ofs; -+ bool partial_start; - }; - - struct mtd_erase_region_info { diff --git a/target/linux/generic/patches-3.3/410-mtd_info_move_forward_decl.patch b/target/linux/generic/patches-3.3/410-mtd_info_move_forward_decl.patch deleted file mode 100644 index 251f522e44..0000000000 --- a/target/linux/generic/patches-3.3/410-mtd_info_move_forward_decl.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/include/linux/mtd/partitions.h -+++ b/include/linux/mtd/partitions.h -@@ -35,6 +35,7 @@ - * Note: writeable partitions require their size and offset be - * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK). - */ -+struct mtd_info; - - struct mtd_partition; - struct mtd_partition { -@@ -52,7 +53,6 @@ struct mtd_partition { - #define MTDPART_SIZ_FULL (0) - - --struct mtd_info; - struct device_node; - - /** diff --git a/target/linux/generic/patches-3.3/420-redboot_space.patch b/target/linux/generic/patches-3.3/420-redboot_space.patch deleted file mode 100644 index fb6700b07e..0000000000 --- a/target/linux/generic/patches-3.3/420-redboot_space.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -267,14 +267,21 @@ static int parse_redboot_partitions(stru - #endif - names += strlen(names)+1; - --#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED - if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) { -- i++; -- parts[i].offset = parts[i-1].size + parts[i-1].offset; -- parts[i].size = fl->next->img->flash_base - parts[i].offset; -- parts[i].name = nullname; -- } -+ if (!strcmp(parts[i].name, "rootfs")) { -+ parts[i].size = fl->next->img->flash_base; -+ parts[i].size &= ~(master->erasesize - 1); -+ parts[i].size -= parts[i].offset; -+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED -+ nrparts--; -+ } else { -+ i++; -+ parts[i].offset = parts[i-1].size + parts[i-1].offset; -+ parts[i].size = fl->next->img->flash_base - parts[i].offset; -+ parts[i].name = nullname; - #endif -+ } -+ } - tmp_fl = fl; - fl = fl->next; - kfree(tmp_fl); diff --git a/target/linux/generic/patches-3.3/430-mtd_myloader_partition_parser.patch b/target/linux/generic/patches-3.3/430-mtd_myloader_partition_parser.patch deleted file mode 100644 index d60126dcdf..0000000000 --- a/target/linux/generic/patches-3.3/430-mtd_myloader_partition_parser.patch +++ /dev/null @@ -1,35 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -156,6 +156,22 @@ config MTD_BCM63XX_PARTS - This provides partions parsing for BCM63xx devices with CFE - bootloaders. - -+config MTD_MYLOADER_PARTS -+ tristate "MyLoader partition parsing" -+ depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79 -+ ---help--- -+ MyLoader is a bootloader which allows the user to define partitions -+ in flash devices, by putting a table in the second erase block -+ on the device, similar to a partition table. This table gives the -+ offsets and lengths of the user defined partitions. -+ -+ If you need code which can detect and parse these tables, and -+ register MTD 'partitions' corresponding to each image detected, -+ enable this option. -+ -+ You will still need the parsing functions to be called by the driver -+ for your particular device. It won't happen automatically. -+ - comment "User Modules And Translation Layers" - - config MTD_CHAR ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o - obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o -+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o diff --git a/target/linux/generic/patches-3.3/440-block2mtd_init.patch b/target/linux/generic/patches-3.3/440-block2mtd_init.patch deleted file mode 100644 index 00208c8700..0000000000 --- a/target/linux/generic/patches-3.3/440-block2mtd_init.patch +++ /dev/null @@ -1,116 +0,0 @@ ---- a/drivers/mtd/devices/block2mtd.c -+++ b/drivers/mtd/devices/block2mtd.c -@@ -14,6 +14,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -231,11 +232,12 @@ static void block2mtd_free_device(struct - - - /* FIXME: ensure that mtd->size % erase_size == 0 */ --static struct block2mtd_dev *add_device(char *devname, int erase_size) -+static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname) - { - const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL; - struct block_device *bdev; - struct block2mtd_dev *dev; -+ struct mtd_partition *part; - char *name; - - if (!devname) -@@ -274,13 +276,16 @@ static struct block2mtd_dev *add_device( - - /* Setup the MTD structure */ - /* make the name contain the block device in */ -- name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname); -+ if (!mtdname) -+ mtdname = devname; -+ name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL); - if (!name) - goto devinit_err; - -+ strcpy(name, mtdname); - dev->mtd.name = name; - -- dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK; -+ dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1); - dev->mtd.erasesize = erase_size; - dev->mtd.writesize = 1; - dev->mtd.writebufsize = PAGE_SIZE; -@@ -294,14 +299,17 @@ static struct block2mtd_dev *add_device( - dev->mtd.priv = dev; - dev->mtd.owner = THIS_MODULE; - -- if (mtd_device_register(&dev->mtd, NULL, 0)) { -+ part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL); -+ part->name = name; -+ part->offset = 0; -+ part->size = dev->mtd.size; -+ if (mtd_device_register(&dev->mtd, part, 1)) { - /* Device didn't get added, so free the entry */ - goto devinit_err; - } - list_add(&dev->list, &blkmtd_device_list); - INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index, -- dev->mtd.name + strlen("block2mtd: "), -- dev->mtd.erasesize >> 10, dev->mtd.erasesize); -+ mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize); - return dev; - - devinit_err: -@@ -374,9 +382,9 @@ static char block2mtd_paramline[80 + 12] - - static int block2mtd_setup2(const char *val) - { -- char buf[80 + 12]; /* 80 for device, 12 for erase size */ -+ char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */ - char *str = buf; -- char *token[2]; -+ char *token[3]; - char *name; - size_t erase_size = PAGE_SIZE; - int i, ret; -@@ -387,7 +395,7 @@ static int block2mtd_setup2(const char * - strcpy(str, val); - kill_final_newline(str); - -- for (i = 0; i < 2; i++) -+ for (i = 0; i < 3; i++) - token[i] = strsep(&str, ","); - - if (str) -@@ -406,8 +414,10 @@ static int block2mtd_setup2(const char * - parse_err("illegal erase size"); - } - } -+ if (token[2] && (strlen(token[2]) + 1 > 80)) -+ parse_err("mtd device name too long"); - -- add_device(name, erase_size); -+ add_device(name, erase_size, token[2]); - - return 0; - } -@@ -441,7 +451,7 @@ static int block2mtd_setup(const char *v - - - module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200); --MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=[,]\""); -+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=[,[,]]\""); - - static int __init block2mtd_init(void) - { ---- a/block/partition-generic.c -+++ b/block/partition-generic.c -@@ -546,6 +546,7 @@ int invalidate_partitions(struct gendisk - - return 0; - } -+EXPORT_SYMBOL(rescan_partitions); - - unsigned char *read_dev_sector(struct block_device *bdev, sector_t n, Sector *p) - { diff --git a/target/linux/generic/patches-3.3/441-block2mtd_refresh.patch b/target/linux/generic/patches-3.3/441-block2mtd_refresh.patch deleted file mode 100644 index 979b43b6e8..0000000000 --- a/target/linux/generic/patches-3.3/441-block2mtd_refresh.patch +++ /dev/null @@ -1,291 +0,0 @@ ---- a/drivers/mtd/devices/block2mtd.c -+++ b/drivers/mtd/devices/block2mtd.c -@@ -29,6 +29,8 @@ struct block2mtd_dev { - struct block_device *blkdev; - struct mtd_info mtd; - struct mutex write_mutex; -+ rwlock_t bdev_mutex; -+ char devname[0]; - }; - - -@@ -81,6 +83,12 @@ static int block2mtd_erase(struct mtd_in - size_t len = instr->len; - int err; - -+ read_lock(&dev->bdev_mutex); -+ if (!dev->blkdev) { -+ err = -EINVAL; -+ goto done; -+ } -+ - instr->state = MTD_ERASING; - mutex_lock(&dev->write_mutex); - err = _block2mtd_erase(dev, from, len); -@@ -92,6 +100,10 @@ static int block2mtd_erase(struct mtd_in - instr->state = MTD_ERASE_DONE; - - mtd_erase_callback(instr); -+ -+done: -+ read_unlock(&dev->bdev_mutex); -+ - return err; - } - -@@ -103,10 +115,14 @@ static int block2mtd_read(struct mtd_inf - struct page *page; - int index = from >> PAGE_SHIFT; - int offset = from & (PAGE_SIZE-1); -- int cpylen; -+ int cpylen, err = 0; -+ -+ read_lock(&dev->bdev_mutex); -+ if (!dev->blkdev || (from > mtd->size)) { -+ err = -EINVAL; -+ goto done; -+ } - -- if (from > mtd->size) -- return -EINVAL; - if (from + len > mtd->size) - len = mtd->size - from; - -@@ -121,10 +137,14 @@ static int block2mtd_read(struct mtd_inf - len = len - cpylen; - - page = page_read(dev->blkdev->bd_inode->i_mapping, index); -- if (!page) -- return -ENOMEM; -- if (IS_ERR(page)) -- return PTR_ERR(page); -+ if (!page) { -+ err = -ENOMEM; -+ goto done; -+ } -+ if (IS_ERR(page)) { -+ err = PTR_ERR(page); -+ goto done; -+ } - - memcpy(buf, page_address(page) + offset, cpylen); - page_cache_release(page); -@@ -135,7 +155,10 @@ static int block2mtd_read(struct mtd_inf - offset = 0; - index++; - } -- return 0; -+ -+done: -+ read_unlock(&dev->bdev_mutex); -+ return err; - } - - -@@ -187,12 +210,22 @@ static int block2mtd_write(struct mtd_in - size_t *retlen, const u_char *buf) - { - struct block2mtd_dev *dev = mtd->priv; -- int err; -+ int err = 0; -+ -+ read_lock(&dev->bdev_mutex); -+ if (!dev->blkdev) { -+ err = -EINVAL; -+ goto done; -+ } - - if (!len) -- return 0; -- if (to >= mtd->size) -- return -ENOSPC; -+ goto done; -+ -+ if (to >= mtd->size) { -+ err = -ENOSPC; -+ goto done; -+ } -+ - if (to + len > mtd->size) - len = mtd->size - to; - -@@ -201,6 +234,9 @@ static int block2mtd_write(struct mtd_in - mutex_unlock(&dev->write_mutex); - if (err > 0) - err = 0; -+ -+done: -+ read_unlock(&dev->bdev_mutex); - return err; - } - -@@ -209,33 +245,110 @@ static int block2mtd_write(struct mtd_in - static void block2mtd_sync(struct mtd_info *mtd) - { - struct block2mtd_dev *dev = mtd->priv; -+ read_lock(&dev->bdev_mutex); -+ if (dev->blkdev) - sync_blockdev(dev->blkdev); -+ read_unlock(&dev->bdev_mutex); -+ - return; - } - - -+static int _open_bdev(struct block2mtd_dev *dev) -+{ -+ const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL; -+ struct block_device *bdev; -+ -+ /* Get a handle on the device */ -+ bdev = blkdev_get_by_path(dev->devname, mode, dev); -+#ifndef MODULE -+ if (IS_ERR(bdev)) { -+ dev_t devt; -+ -+ /* We might not have rootfs mounted at this point. Try -+ to resolve the device name by other means. */ -+ -+ devt = name_to_dev_t(dev->devname); -+ if (devt) -+ bdev = blkdev_get_by_dev(devt, mode, dev); -+ } -+#endif -+ -+ if (IS_ERR(bdev)) { -+ ERROR("error: cannot open device %s", dev->devname); -+ return 1; -+ } -+ dev->blkdev = bdev; -+ -+ if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) { -+ ERROR("attempting to use an MTD device as a block device"); -+ return 1; -+ } -+ -+ return 0; -+} -+ -+static void _close_bdev(struct block2mtd_dev *dev) -+{ -+ struct block_device *bdev; -+ -+ if (!dev->blkdev) -+ return; -+ -+ bdev = dev->blkdev; -+ invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping, 0, -1); -+ blkdev_put(dev->blkdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL); -+ dev->blkdev = NULL; -+} -+ - static void block2mtd_free_device(struct block2mtd_dev *dev) - { - if (!dev) - return; - - kfree(dev->mtd.name); -- -- if (dev->blkdev) { -- invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping, -- 0, -1); -- blkdev_put(dev->blkdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL); -- } -- -+ _close_bdev(dev); - kfree(dev); - } - - --/* FIXME: ensure that mtd->size % erase_size == 0 */ --static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname) -+static int block2mtd_refresh(struct mtd_info *mtd) - { -- const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL; -+ struct block2mtd_dev *dev = mtd->priv; - struct block_device *bdev; -+ dev_t devt; -+ int err = 0; -+ -+ /* no other mtd function can run at this point */ -+ write_lock(&dev->bdev_mutex); -+ -+ /* get the device number for the whole disk */ -+ devt = MKDEV(MAJOR(dev->blkdev->bd_dev), 0); -+ -+ /* close the old block device */ -+ _close_bdev(dev); -+ -+ /* open the whole disk, issue a partition rescan, then */ -+ bdev = blkdev_get_by_dev(devt, FMODE_WRITE | FMODE_READ, mtd); -+ if (!bdev || !bdev->bd_disk) -+ err = -EINVAL; -+#ifndef CONFIG_MTD_BLOCK2MTD_MODULE -+ else -+ err = rescan_partitions(bdev->bd_disk, bdev); -+#endif -+ if (bdev) -+ blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL); -+ -+ /* try to open the partition block device again */ -+ _open_bdev(dev); -+ write_unlock(&dev->bdev_mutex); -+ -+ return err; -+} -+ -+/* FIXME: ensure that mtd->size % erase_size == 0 */ -+static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname) -+{ - struct block2mtd_dev *dev; - struct mtd_partition *part; - char *name; -@@ -243,36 +356,17 @@ static struct block2mtd_dev *add_device( - if (!devname) - return NULL; - -- dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL); -+ dev = kzalloc(sizeof(struct block2mtd_dev) + strlen(devname) + 1, GFP_KERNEL); - if (!dev) - return NULL; - -- /* Get a handle on the device */ -- bdev = blkdev_get_by_path(devname, mode, dev); --#ifndef MODULE -- if (IS_ERR(bdev)) { -- -- /* We might not have rootfs mounted at this point. Try -- to resolve the device name by other means. */ -+ strcpy(dev->devname, devname); - -- dev_t devt = name_to_dev_t(devname); -- if (devt) -- bdev = blkdev_get_by_dev(devt, mode, dev); -- } --#endif -- -- if (IS_ERR(bdev)) { -- ERROR("error: cannot open device %s", devname); -+ if (_open_bdev(dev)) - goto devinit_err; -- } -- dev->blkdev = bdev; -- -- if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) { -- ERROR("attempting to use an MTD device as a block device"); -- goto devinit_err; -- } - - mutex_init(&dev->write_mutex); -+ rwlock_init(&dev->bdev_mutex); - - /* Setup the MTD structure */ - /* make the name contain the block device in */ -@@ -298,6 +392,7 @@ static struct block2mtd_dev *add_device( - dev->mtd.read = block2mtd_read; - dev->mtd.priv = dev; - dev->mtd.owner = THIS_MODULE; -+ dev->mtd.refresh_device = block2mtd_refresh; - - part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL); - part->name = name; diff --git a/target/linux/generic/patches-3.3/442-block2mtd_probe.patch b/target/linux/generic/patches-3.3/442-block2mtd_probe.patch deleted file mode 100644 index c427e9fd01..0000000000 --- a/target/linux/generic/patches-3.3/442-block2mtd_probe.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/mtd/devices/block2mtd.c -+++ b/drivers/mtd/devices/block2mtd.c -@@ -268,6 +268,7 @@ static int _open_bdev(struct block2mtd_d - /* We might not have rootfs mounted at this point. Try - to resolve the device name by other means. */ - -+ wait_for_device_probe(); - devt = name_to_dev_t(dev->devname); - if (devt) - bdev = blkdev_get_by_dev(devt, mode, dev); diff --git a/target/linux/generic/patches-3.3/443-block2mtd-avoid-recursive-call-of-mtd_writev.patch b/target/linux/generic/patches-3.3/443-block2mtd-avoid-recursive-call-of-mtd_writev.patch deleted file mode 100644 index 0ce9368f91..0000000000 --- a/target/linux/generic/patches-3.3/443-block2mtd-avoid-recursive-call-of-mtd_writev.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/mtd/devices/block2mtd.c -+++ b/drivers/mtd/devices/block2mtd.c -@@ -388,7 +388,6 @@ static struct block2mtd_dev *add_device( - dev->mtd.flags = MTD_CAP_RAM; - dev->mtd.erase = block2mtd_erase; - dev->mtd.write = block2mtd_write; -- dev->mtd.writev = mtd_writev; - dev->mtd.sync = block2mtd_sync; - dev->mtd.read = block2mtd_read; - dev->mtd.priv = dev; diff --git a/target/linux/generic/patches-3.3/450-mtd_plat_nand_chip_fixup.patch b/target/linux/generic/patches-3.3/450-mtd_plat_nand_chip_fixup.patch deleted file mode 100644 index fd2b9b57b9..0000000000 --- a/target/linux/generic/patches-3.3/450-mtd_plat_nand_chip_fixup.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- - drivers/mtd/nand/plat_nand.c | 13 ++++++++++++- - include/linux/mtd/nand.h | 1 + - 2 files changed, 13 insertions(+), 1 deletion(-) - ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -622,6 +622,7 @@ struct platform_nand_chip { - unsigned int options; - unsigned int bbt_options; - const char **part_probe_types; -+ int (*chip_fixup)(struct mtd_info *mtd); - }; - - /* Keep gcc happy */ ---- a/drivers/mtd/nand/plat_nand.c -+++ b/drivers/mtd/nand/plat_nand.c -@@ -93,7 +93,18 @@ static int __devinit plat_nand_probe(str - } - - /* Scan to find existence of the device */ -- if (nand_scan(&data->mtd, pdata->chip.nr_chips)) { -+ if (nand_scan_ident(&data->mtd, pdata->chip.nr_chips, NULL)) { -+ err = -ENXIO; -+ goto out; -+ } -+ -+ if (pdata->chip.chip_fixup) { -+ err = pdata->chip.chip_fixup(&data->mtd); -+ if (err) -+ goto out; -+ } -+ -+ if (nand_scan_tail(&data->mtd)) { - err = -ENXIO; - goto out; - } diff --git a/target/linux/generic/patches-3.3/451-mtd_fix_nand_correct_data_return_code.patch b/target/linux/generic/patches-3.3/451-mtd_fix_nand_correct_data_return_code.patch deleted file mode 100644 index 2f72d8594d..0000000000 --- a/target/linux/generic/patches-3.3/451-mtd_fix_nand_correct_data_return_code.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/mtd/nand/nand_ecc.c -+++ b/drivers/mtd/nand/nand_ecc.c -@@ -507,8 +507,7 @@ int __nand_correct_data(unsigned char *b - if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1) - return 1; /* error in ECC data; no action needed */ - -- printk(KERN_ERR "uncorrectable error : "); -- return -1; -+ return -EBADMSG; - } - EXPORT_SYMBOL(__nand_correct_data); - diff --git a/target/linux/generic/patches-3.3/460-cfi_cmdset_0002_no_erase_suspend.patch b/target/linux/generic/patches-3.3/460-cfi_cmdset_0002_no_erase_suspend.patch deleted file mode 100644 index 0c4b9bea0e..0000000000 --- a/target/linux/generic/patches-3.3/460-cfi_cmdset_0002_no_erase_suspend.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -682,7 +682,7 @@ static int get_chip(struct map_info *map - return 0; - - case FL_ERASING: -- if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) || -+ if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) || - !(mode == FL_READY || mode == FL_POINT || - (mode == FL_WRITING && (cfip->EraseSuspend & 0x2)))) - goto sleep; diff --git a/target/linux/generic/patches-3.3/470-mtd_m25p80_add_pm25lv_flash_support.patch b/target/linux/generic/patches-3.3/470-mtd_m25p80_add_pm25lv_flash_support.patch deleted file mode 100644 index ff27d04f8f..0000000000 --- a/target/linux/generic/patches-3.3/470-mtd_m25p80_add_pm25lv_flash_support.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -45,6 +45,7 @@ - #define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ - #define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ - #define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */ -+#define OPCODE_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips*/ - #define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ - #define OPCODE_RDID 0x9f /* Read JEDEC ID */ - -@@ -625,6 +626,7 @@ struct flash_info { - u16 flags; - #define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */ - #define M25P_NO_ERASE 0x02 /* No erase command needed */ -+#define SECT_4K_PMC 0x04 /* OPCODE_BE_4K_PMC works uniformly */ - }; - - #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ -@@ -686,6 +688,10 @@ static const struct spi_device_id m25p_i - { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) }, - { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, - -+ /* PMC -- pm25x "blocks" are 32K, sectors are 4K */ -+ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, -+ { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) }, -+ - /* Spansion -- single (large) sector size only, at least - * for the chips listed here (without boot sectors). - */ -@@ -921,6 +927,9 @@ static int __devinit m25p_probe(struct s - if (info->flags & SECT_4K) { - flash->erase_opcode = OPCODE_BE_4K; - flash->mtd.erasesize = 4096; -+ } else if (info->flags & SECT_4K_PMC) { -+ flash->erase_opcode = OPCODE_BE_4K_PMC; -+ flash->mtd.erasesize = 4096; - } else { - flash->erase_opcode = OPCODE_SE; - flash->mtd.erasesize = info->sector_size; diff --git a/target/linux/generic/patches-3.3/473-mtd_m25p80_add_w25q128.patch b/target/linux/generic/patches-3.3/473-mtd_m25p80_add_w25q128.patch deleted file mode 100644 index b00c9fae35..0000000000 --- a/target/linux/generic/patches-3.3/473-mtd_m25p80_add_w25q128.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -765,6 +765,7 @@ static const struct spi_device_id m25p_i - { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) }, - { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) }, - { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, -+ { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, - - /* Catalyst / On Semiconductor -- non-JEDEC */ - { "cat25c11", CAT25_INFO( 16, 8, 16, 1) }, diff --git a/target/linux/generic/patches-3.3/475-mtd_cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch b/target/linux/generic/patches-3.3/475-mtd_cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch deleted file mode 100644 index 3b43535da5..0000000000 --- a/target/linux/generic/patches-3.3/475-mtd_cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch +++ /dev/null @@ -1,18 +0,0 @@ -From: George Kashperko - -Issue map read after Write Buffer Load command to ensure chip is ready -to receive data. -Signed-off-by: George Kashperko ---- - drivers/mtd/chips/cfi_cmdset_0002.c | 1 + - 1 file changed, 1 insertion(+) ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1409,6 +1409,7 @@ static int __xipram do_write_buffer(stru - - /* Write Buffer Load */ - map_write(map, CMD(0x25), cmd_adr); -+ (void) map_read(map, cmd_adr); - - chip->state = FL_WRITING_TO_BUFFER; - diff --git a/target/linux/generic/patches-3.3/476-mtd-m25p80-allow-to-disable-small-sector-erase.patch b/target/linux/generic/patches-3.3/476-mtd-m25p80-allow-to-disable-small-sector-erase.patch deleted file mode 100644 index 231d4548c7..0000000000 --- a/target/linux/generic/patches-3.3/476-mtd-m25p80-allow-to-disable-small-sector-erase.patch +++ /dev/null @@ -1,41 +0,0 @@ ---- a/drivers/mtd/devices/Kconfig -+++ b/drivers/mtd/devices/Kconfig -@@ -102,6 +102,14 @@ config M25PXX_USE_FAST_READ - help - This option enables FAST_READ access supported by ST M25Pxx. - -+config M25PXX_PREFER_SMALL_SECTOR_ERASE -+ bool "Prefer small sector erase" -+ depends on MTD_M25P80 -+ default y -+ help -+ This option enables use of the small erase sectors if that is -+ supported by the flash chip. -+ - config MTD_SST25L - tristate "Support SST25L (non JEDEC) SPI Flash chips" - depends on SPI_MASTER ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -84,6 +84,12 @@ - - #define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16) - -+#ifdef CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE -+#define PREFER_SMALL_SECTOR_ERASE 1 -+#else -+#define PREFER_SMALL_SECTOR_ERASE 0 -+#endif -+ - /****************************************************************************/ - - struct m25p { -@@ -925,7 +931,7 @@ static int __devinit m25p_probe(struct s - flash->mtd.write = m25p80_write; - - /* prefer "small sector" erase if possible */ -- if (info->flags & SECT_4K) { -+ if (PREFER_SMALL_SECTOR_ERASE && (info->flags & SECT_4K)) { - flash->erase_opcode = OPCODE_BE_4K; - flash->mtd.erasesize = 4096; - } else if (info->flags & SECT_4K_PMC) { diff --git a/target/linux/generic/patches-3.3/477-mtd-m25p80-add-support-for-the-EON-EN25Q64-chip.patch b/target/linux/generic/patches-3.3/477-mtd-m25p80-add-support-for-the-EON-EN25Q64-chip.patch deleted file mode 100644 index 439cbde163..0000000000 --- a/target/linux/generic/patches-3.3/477-mtd-m25p80-add-support-for-the-EON-EN25Q64-chip.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -677,6 +677,7 @@ static const struct spi_device_id m25p_i - { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) }, - { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) }, - { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, -+ { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, - - /* Intel/Numonyx -- xxxs33b */ - { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, diff --git a/target/linux/generic/patches-3.3/478-mtd-partial_eraseblock_unlock.patch b/target/linux/generic/patches-3.3/478-mtd-partial_eraseblock_unlock.patch deleted file mode 100644 index d4d2940db1..0000000000 --- a/target/linux/generic/patches-3.3/478-mtd-partial_eraseblock_unlock.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/drivers/mtd/mtdpart.c -+++ b/drivers/mtd/mtdpart.c -@@ -357,7 +357,14 @@ static int part_unlock(struct mtd_info * - struct mtd_part *part = PART(mtd); - if ((len + ofs) > mtd->size) - return -EINVAL; -- return mtd_unlock(part->master, ofs + part->offset, len); -+ -+ ofs += part->offset; -+ if (mtd->flags & MTD_ERASE_PARTIAL) { -+ /* round up len to next erasesize and round down offset to prev block */ -+ len = (mtd_div_by_eb(len, part->master) + 1) * part->master->erasesize; -+ ofs &= ~(part->master->erasesize - 1); -+ } -+ return mtd_unlock(part->master, ofs, len); - } - - static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) diff --git a/target/linux/generic/patches-3.3/520-squashfs_update_xz_comp_opts.patch b/target/linux/generic/patches-3.3/520-squashfs_update_xz_comp_opts.patch deleted file mode 100644 index 523b89f9ac..0000000000 --- a/target/linux/generic/patches-3.3/520-squashfs_update_xz_comp_opts.patch +++ /dev/null @@ -1,25 +0,0 @@ -From f31b7c0efa255dd17a5f584022a319387f09b0d8 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 12 Apr 2011 19:55:41 +0200 -Subject: [PATCH] squashfs: update xz compressor options struct. - -Update the xz compressor options struct to match the squashfs userspace -one. ---- - fs/squashfs/xz_wrapper.c | 4 +++- - 1 files changed, 3 insertions(+), 1 deletions(-) - ---- a/fs/squashfs/xz_wrapper.c -+++ b/fs/squashfs/xz_wrapper.c -@@ -39,8 +39,10 @@ struct squashfs_xz { - }; - - struct comp_opts { -- __le32 dictionary_size; - __le32 flags; -+ __le16 bit_opts; -+ __le16 fb; -+ __le32 dictionary_size; - }; - - static void *squashfs_xz_init(struct squashfs_sb_info *msblk, void *buff, diff --git a/target/linux/generic/patches-3.3/530-jffs2_make_lzma_available.patch b/target/linux/generic/patches-3.3/530-jffs2_make_lzma_available.patch deleted file mode 100644 index fa79ba313d..0000000000 --- a/target/linux/generic/patches-3.3/530-jffs2_make_lzma_available.patch +++ /dev/null @@ -1,5142 +0,0 @@ ---- a/fs/jffs2/Kconfig -+++ b/fs/jffs2/Kconfig -@@ -139,6 +139,15 @@ config JFFS2_LZO - This feature was added in July, 2007. Say 'N' if you need - compatibility with older bootloaders or kernels. - -+config JFFS2_LZMA -+ bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS -+ select LZMA_COMPRESS -+ select LZMA_DECOMPRESS -+ depends on JFFS2_FS -+ default n -+ help -+ JFFS2 wrapper to the LZMA C SDK -+ - config JFFS2_RTIME - bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS - depends on JFFS2_FS ---- a/fs/jffs2/Makefile -+++ b/fs/jffs2/Makefile -@@ -18,4 +18,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN) += compr_rub - jffs2-$(CONFIG_JFFS2_RTIME) += compr_rtime.o - jffs2-$(CONFIG_JFFS2_ZLIB) += compr_zlib.o - jffs2-$(CONFIG_JFFS2_LZO) += compr_lzo.o -+jffs2-$(CONFIG_JFFS2_LZMA) += compr_lzma.o - jffs2-$(CONFIG_JFFS2_SUMMARY) += summary.o -+ -+CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma ---- a/fs/jffs2/compr.c -+++ b/fs/jffs2/compr.c -@@ -374,6 +374,9 @@ int __init jffs2_compressors_init(void) - #ifdef CONFIG_JFFS2_LZO - jffs2_lzo_init(); - #endif -+#ifdef CONFIG_JFFS2_LZMA -+ jffs2_lzma_init(); -+#endif - /* Setting default compression mode */ - #ifdef CONFIG_JFFS2_CMODE_NONE - jffs2_compression_mode = JFFS2_COMPR_MODE_NONE; -@@ -397,6 +400,9 @@ int __init jffs2_compressors_init(void) - int jffs2_compressors_exit(void) - { - /* Unregistering compressors */ -+#ifdef CONFIG_JFFS2_LZMA -+ jffs2_lzma_exit(); -+#endif - #ifdef CONFIG_JFFS2_LZO - jffs2_lzo_exit(); - #endif ---- a/fs/jffs2/compr.h -+++ b/fs/jffs2/compr.h -@@ -29,9 +29,9 @@ - #define JFFS2_DYNRUBIN_PRIORITY 20 - #define JFFS2_LZARI_PRIORITY 30 - #define JFFS2_RTIME_PRIORITY 50 --#define JFFS2_ZLIB_PRIORITY 60 --#define JFFS2_LZO_PRIORITY 80 -- -+#define JFFS2_LZMA_PRIORITY 70 -+#define JFFS2_ZLIB_PRIORITY 80 -+#define JFFS2_LZO_PRIORITY 90 - - #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */ - #define JFFS2_DYNRUBIN_DISABLED /* for decompression */ -@@ -101,5 +101,9 @@ void jffs2_zlib_exit(void); - int jffs2_lzo_init(void); - void jffs2_lzo_exit(void); - #endif -+#ifdef CONFIG_JFFS2_LZMA -+int jffs2_lzma_init(void); -+void jffs2_lzma_exit(void); -+#endif - - #endif /* __JFFS2_COMPR_H__ */ ---- /dev/null -+++ b/fs/jffs2/compr_lzma.c -@@ -0,0 +1,128 @@ -+/* -+ * JFFS2 -- Journalling Flash File System, Version 2. -+ * -+ * For licensing information, see the file 'LICENCE' in this directory. -+ * -+ * JFFS2 wrapper to the LZMA C SDK -+ * -+ */ -+ -+#include -+#include "compr.h" -+ -+#ifdef __KERNEL__ -+ static DEFINE_MUTEX(deflate_mutex); -+#endif -+ -+CLzmaEncHandle *p; -+Byte propsEncoded[LZMA_PROPS_SIZE]; -+SizeT propsSize = sizeof(propsEncoded); -+ -+STATIC void lzma_free_workspace(void) -+{ -+ LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc); -+} -+ -+STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props) -+{ -+ if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL) -+ { -+ PRINT_ERROR("Failed to allocate lzma deflate workspace\n"); -+ return -ENOMEM; -+ } -+ -+ if (LzmaEnc_SetProps(p, props) != SZ_OK) -+ { -+ lzma_free_workspace(); -+ return -1; -+ } -+ -+ if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK) -+ { -+ lzma_free_workspace(); -+ return -1; -+ } -+ -+ return 0; -+} -+ -+STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out, -+ uint32_t *sourcelen, uint32_t *dstlen) -+{ -+ SizeT compress_size = (SizeT)(*dstlen); -+ int ret; -+ -+ #ifdef __KERNEL__ -+ mutex_lock(&deflate_mutex); -+ #endif -+ -+ ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen, -+ 0, NULL, &lzma_alloc, &lzma_alloc); -+ -+ #ifdef __KERNEL__ -+ mutex_unlock(&deflate_mutex); -+ #endif -+ -+ if (ret != SZ_OK) -+ return -1; -+ -+ *dstlen = (uint32_t)compress_size; -+ -+ return 0; -+} -+ -+STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out, -+ uint32_t srclen, uint32_t destlen) -+{ -+ int ret; -+ SizeT dl = (SizeT)destlen; -+ SizeT sl = (SizeT)srclen; -+ ELzmaStatus status; -+ -+ ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded, -+ propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc); -+ -+ if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen) -+ return -1; -+ -+ return 0; -+} -+ -+static struct jffs2_compressor jffs2_lzma_comp = { -+ .priority = JFFS2_LZMA_PRIORITY, -+ .name = "lzma", -+ .compr = JFFS2_COMPR_LZMA, -+ .compress = &jffs2_lzma_compress, -+ .decompress = &jffs2_lzma_decompress, -+ .disabled = 0, -+}; -+ -+int INIT jffs2_lzma_init(void) -+{ -+ int ret; -+ CLzmaEncProps props; -+ LzmaEncProps_Init(&props); -+ -+ props.dictSize = LZMA_BEST_DICT(0x2000); -+ props.level = LZMA_BEST_LEVEL; -+ props.lc = LZMA_BEST_LC; -+ props.lp = LZMA_BEST_LP; -+ props.pb = LZMA_BEST_PB; -+ props.fb = LZMA_BEST_FB; -+ -+ ret = lzma_alloc_workspace(&props); -+ if (ret < 0) -+ return ret; -+ -+ ret = jffs2_register_compressor(&jffs2_lzma_comp); -+ if (ret) -+ lzma_free_workspace(); -+ -+ return ret; -+} -+ -+void jffs2_lzma_exit(void) -+{ -+ jffs2_unregister_compressor(&jffs2_lzma_comp); -+ lzma_free_workspace(); -+} ---- a/fs/jffs2/super.c -+++ b/fs/jffs2/super.c -@@ -371,14 +371,41 @@ static int __init init_jffs2_fs(void) - BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68); - BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32); - -- printk(KERN_INFO "JFFS2 version 2.2." -+ printk(KERN_INFO "JFFS2 version 2.2" - #ifdef CONFIG_JFFS2_FS_WRITEBUFFER - " (NAND)" - #endif - #ifdef CONFIG_JFFS2_SUMMARY -- " (SUMMARY) " -+ " (SUMMARY)" - #endif -- " © 2001-2006 Red Hat, Inc.\n"); -+#ifdef CONFIG_JFFS2_ZLIB -+ " (ZLIB)" -+#endif -+#ifdef CONFIG_JFFS2_LZO -+ " (LZO)" -+#endif -+#ifdef CONFIG_JFFS2_LZMA -+ " (LZMA)" -+#endif -+#ifdef CONFIG_JFFS2_RTIME -+ " (RTIME)" -+#endif -+#ifdef CONFIG_JFFS2_RUBIN -+ " (RUBIN)" -+#endif -+#ifdef CONFIG_JFFS2_CMODE_NONE -+ " (CMODE_NONE)" -+#endif -+#ifdef CONFIG_JFFS2_CMODE_PRIORITY -+ " (CMODE_PRIORITY)" -+#endif -+#ifdef CONFIG_JFFS2_CMODE_SIZE -+ " (CMODE_SIZE)" -+#endif -+#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO -+ " (CMODE_FAVOURLZO)" -+#endif -+ " (c) 2001-2006 Red Hat, Inc.\n"); - - jffs2_inode_cachep = kmem_cache_create("jffs2_i", - sizeof(struct jffs2_inode_info), ---- a/include/linux/jffs2.h -+++ b/include/linux/jffs2.h -@@ -46,6 +46,7 @@ - #define JFFS2_COMPR_DYNRUBIN 0x05 - #define JFFS2_COMPR_ZLIB 0x06 - #define JFFS2_COMPR_LZO 0x07 -+#define JFFS2_COMPR_LZMA 0x08 - /* Compatibility flags. */ - #define JFFS2_COMPAT_MASK 0xc000 /* What do to if an unknown nodetype is found */ - #define JFFS2_NODE_ACCURATE 0x2000 ---- /dev/null -+++ b/include/linux/lzma.h -@@ -0,0 +1,62 @@ -+#ifndef __LZMA_H__ -+#define __LZMA_H__ -+ -+#ifdef __KERNEL__ -+ #include -+ #include -+ #include -+ #include -+ #include -+ #define LZMA_MALLOC vmalloc -+ #define LZMA_FREE vfree -+ #define PRINT_ERROR(msg) printk(KERN_WARNING #msg) -+ #define INIT __init -+ #define STATIC static -+#else -+ #include -+ #include -+ #include -+ #include -+ #include -+ #include -+ #include -+ #include -+ #ifndef PAGE_SIZE -+ extern int page_size; -+ #define PAGE_SIZE page_size -+ #endif -+ #define LZMA_MALLOC malloc -+ #define LZMA_FREE free -+ #define PRINT_ERROR(msg) fprintf(stderr, msg) -+ #define INIT -+ #define STATIC -+#endif -+ -+#include "lzma/LzmaDec.h" -+#include "lzma/LzmaEnc.h" -+ -+#define LZMA_BEST_LEVEL (9) -+#define LZMA_BEST_LC (0) -+#define LZMA_BEST_LP (0) -+#define LZMA_BEST_PB (0) -+#define LZMA_BEST_FB (273) -+ -+#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2) -+ -+static void *p_lzma_malloc(void *p, size_t size) -+{ -+ if (size == 0) -+ return NULL; -+ -+ return LZMA_MALLOC(size); -+} -+ -+static void p_lzma_free(void *p, void *address) -+{ -+ if (address != NULL) -+ LZMA_FREE(address); -+} -+ -+static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free}; -+ -+#endif ---- /dev/null -+++ b/include/linux/lzma/LzFind.h -@@ -0,0 +1,115 @@ -+/* LzFind.h -- Match finder for LZ algorithms -+2009-04-22 : Igor Pavlov : Public domain */ -+ -+#ifndef __LZ_FIND_H -+#define __LZ_FIND_H -+ -+#include "Types.h" -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+typedef UInt32 CLzRef; -+ -+typedef struct _CMatchFinder -+{ -+ Byte *buffer; -+ UInt32 pos; -+ UInt32 posLimit; -+ UInt32 streamPos; -+ UInt32 lenLimit; -+ -+ UInt32 cyclicBufferPos; -+ UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */ -+ -+ UInt32 matchMaxLen; -+ CLzRef *hash; -+ CLzRef *son; -+ UInt32 hashMask; -+ UInt32 cutValue; -+ -+ Byte *bufferBase; -+ ISeqInStream *stream; -+ int streamEndWasReached; -+ -+ UInt32 blockSize; -+ UInt32 keepSizeBefore; -+ UInt32 keepSizeAfter; -+ -+ UInt32 numHashBytes; -+ int directInput; -+ size_t directInputRem; -+ int btMode; -+ int bigHash; -+ UInt32 historySize; -+ UInt32 fixedHashSize; -+ UInt32 hashSizeSum; -+ UInt32 numSons; -+ SRes result; -+ UInt32 crc[256]; -+} CMatchFinder; -+ -+#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer) -+#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)]) -+ -+#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos) -+ -+int MatchFinder_NeedMove(CMatchFinder *p); -+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p); -+void MatchFinder_MoveBlock(CMatchFinder *p); -+void MatchFinder_ReadIfRequired(CMatchFinder *p); -+ -+void MatchFinder_Construct(CMatchFinder *p); -+ -+/* Conditions: -+ historySize <= 3 GB -+ keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB -+*/ -+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize, -+ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter, -+ ISzAlloc *alloc); -+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc); -+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems); -+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue); -+ -+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son, -+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue, -+ UInt32 *distances, UInt32 maxLen); -+ -+/* -+Conditions: -+ Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func. -+ Mf_GetPointerToCurrentPos_Func's result must be used only before any other function -+*/ -+ -+typedef void (*Mf_Init_Func)(void *object); -+typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index); -+typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object); -+typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object); -+typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances); -+typedef void (*Mf_Skip_Func)(void *object, UInt32); -+ -+typedef struct _IMatchFinder -+{ -+ Mf_Init_Func Init; -+ Mf_GetIndexByte_Func GetIndexByte; -+ Mf_GetNumAvailableBytes_Func GetNumAvailableBytes; -+ Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos; -+ Mf_GetMatches_Func GetMatches; -+ Mf_Skip_Func Skip; -+} IMatchFinder; -+ -+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable); -+ -+void MatchFinder_Init(CMatchFinder *p); -+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances); -+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances); -+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num); -+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif ---- /dev/null -+++ b/include/linux/lzma/LzHash.h -@@ -0,0 +1,54 @@ -+/* LzHash.h -- HASH functions for LZ algorithms -+2009-02-07 : Igor Pavlov : Public domain */ -+ -+#ifndef __LZ_HASH_H -+#define __LZ_HASH_H -+ -+#define kHash2Size (1 << 10) -+#define kHash3Size (1 << 16) -+#define kHash4Size (1 << 20) -+ -+#define kFix3HashSize (kHash2Size) -+#define kFix4HashSize (kHash2Size + kHash3Size) -+#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size) -+ -+#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8); -+ -+#define HASH3_CALC { \ -+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ -+ hash2Value = temp & (kHash2Size - 1); \ -+ hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; } -+ -+#define HASH4_CALC { \ -+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ -+ hash2Value = temp & (kHash2Size - 1); \ -+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \ -+ hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; } -+ -+#define HASH5_CALC { \ -+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ -+ hash2Value = temp & (kHash2Size - 1); \ -+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \ -+ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \ -+ hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \ -+ hash4Value &= (kHash4Size - 1); } -+ -+/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */ -+#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF; -+ -+ -+#define MT_HASH2_CALC \ -+ hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1); -+ -+#define MT_HASH3_CALC { \ -+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ -+ hash2Value = temp & (kHash2Size - 1); \ -+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); } -+ -+#define MT_HASH4_CALC { \ -+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ -+ hash2Value = temp & (kHash2Size - 1); \ -+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \ -+ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); } -+ -+#endif ---- /dev/null -+++ b/include/linux/lzma/LzmaDec.h -@@ -0,0 +1,231 @@ -+/* LzmaDec.h -- LZMA Decoder -+2009-02-07 : Igor Pavlov : Public domain */ -+ -+#ifndef __LZMA_DEC_H -+#define __LZMA_DEC_H -+ -+#include "Types.h" -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/* #define _LZMA_PROB32 */ -+/* _LZMA_PROB32 can increase the speed on some CPUs, -+ but memory usage for CLzmaDec::probs will be doubled in that case */ -+ -+#ifdef _LZMA_PROB32 -+#define CLzmaProb UInt32 -+#else -+#define CLzmaProb UInt16 -+#endif -+ -+ -+/* ---------- LZMA Properties ---------- */ -+ -+#define LZMA_PROPS_SIZE 5 -+ -+typedef struct _CLzmaProps -+{ -+ unsigned lc, lp, pb; -+ UInt32 dicSize; -+} CLzmaProps; -+ -+/* LzmaProps_Decode - decodes properties -+Returns: -+ SZ_OK -+ SZ_ERROR_UNSUPPORTED - Unsupported properties -+*/ -+ -+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size); -+ -+ -+/* ---------- LZMA Decoder state ---------- */ -+ -+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case. -+ Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */ -+ -+#define LZMA_REQUIRED_INPUT_MAX 20 -+ -+typedef struct -+{ -+ CLzmaProps prop; -+ CLzmaProb *probs; -+ Byte *dic; -+ const Byte *buf; -+ UInt32 range, code; -+ SizeT dicPos; -+ SizeT dicBufSize; -+ UInt32 processedPos; -+ UInt32 checkDicSize; -+ unsigned state; -+ UInt32 reps[4]; -+ unsigned remainLen; -+ int needFlush; -+ int needInitState; -+ UInt32 numProbs; -+ unsigned tempBufSize; -+ Byte tempBuf[LZMA_REQUIRED_INPUT_MAX]; -+} CLzmaDec; -+ -+#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; } -+ -+void LzmaDec_Init(CLzmaDec *p); -+ -+/* There are two types of LZMA streams: -+ 0) Stream with end mark. That end mark adds about 6 bytes to compressed size. -+ 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */ -+ -+typedef enum -+{ -+ LZMA_FINISH_ANY, /* finish at any point */ -+ LZMA_FINISH_END /* block must be finished at the end */ -+} ELzmaFinishMode; -+ -+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!! -+ -+ You must use LZMA_FINISH_END, when you know that current output buffer -+ covers last bytes of block. In other cases you must use LZMA_FINISH_ANY. -+ -+ If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK, -+ and output value of destLen will be less than output buffer size limit. -+ You can check status result also. -+ -+ You can use multiple checks to test data integrity after full decompression: -+ 1) Check Result and "status" variable. -+ 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize. -+ 3) Check that output(srcLen) = compressedSize, if you know real compressedSize. -+ You must use correct finish mode in that case. */ -+ -+typedef enum -+{ -+ LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */ -+ LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */ -+ LZMA_STATUS_NOT_FINISHED, /* stream was not finished */ -+ LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */ -+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */ -+} ELzmaStatus; -+ -+/* ELzmaStatus is used only as output value for function call */ -+ -+ -+/* ---------- Interfaces ---------- */ -+ -+/* There are 3 levels of interfaces: -+ 1) Dictionary Interface -+ 2) Buffer Interface -+ 3) One Call Interface -+ You can select any of these interfaces, but don't mix functions from different -+ groups for same object. */ -+ -+ -+/* There are two variants to allocate state for Dictionary Interface: -+ 1) LzmaDec_Allocate / LzmaDec_Free -+ 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs -+ You can use variant 2, if you set dictionary buffer manually. -+ For Buffer Interface you must always use variant 1. -+ -+LzmaDec_Allocate* can return: -+ SZ_OK -+ SZ_ERROR_MEM - Memory allocation error -+ SZ_ERROR_UNSUPPORTED - Unsupported properties -+*/ -+ -+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc); -+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc); -+ -+SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc); -+void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc); -+ -+/* ---------- Dictionary Interface ---------- */ -+ -+/* You can use it, if you want to eliminate the overhead for data copying from -+ dictionary to some other external buffer. -+ You must work with CLzmaDec variables directly in this interface. -+ -+ STEPS: -+ LzmaDec_Constr() -+ LzmaDec_Allocate() -+ for (each new stream) -+ { -+ LzmaDec_Init() -+ while (it needs more decompression) -+ { -+ LzmaDec_DecodeToDic() -+ use data from CLzmaDec::dic and update CLzmaDec::dicPos -+ } -+ } -+ LzmaDec_Free() -+*/ -+ -+/* LzmaDec_DecodeToDic -+ -+ The decoding to internal dictionary buffer (CLzmaDec::dic). -+ You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!! -+ -+finishMode: -+ It has meaning only if the decoding reaches output limit (dicLimit). -+ LZMA_FINISH_ANY - Decode just dicLimit bytes. -+ LZMA_FINISH_END - Stream must be finished after dicLimit. -+ -+Returns: -+ SZ_OK -+ status: -+ LZMA_STATUS_FINISHED_WITH_MARK -+ LZMA_STATUS_NOT_FINISHED -+ LZMA_STATUS_NEEDS_MORE_INPUT -+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK -+ SZ_ERROR_DATA - Data error -+*/ -+ -+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, -+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); -+ -+ -+/* ---------- Buffer Interface ---------- */ -+ -+/* It's zlib-like interface. -+ See LzmaDec_DecodeToDic description for information about STEPS and return results, -+ but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need -+ to work with CLzmaDec variables manually. -+ -+finishMode: -+ It has meaning only if the decoding reaches output limit (*destLen). -+ LZMA_FINISH_ANY - Decode just destLen bytes. -+ LZMA_FINISH_END - Stream must be finished after (*destLen). -+*/ -+ -+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, -+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); -+ -+ -+/* ---------- One Call Interface ---------- */ -+ -+/* LzmaDecode -+ -+finishMode: -+ It has meaning only if the decoding reaches output limit (*destLen). -+ LZMA_FINISH_ANY - Decode just destLen bytes. -+ LZMA_FINISH_END - Stream must be finished after (*destLen). -+ -+Returns: -+ SZ_OK -+ status: -+ LZMA_STATUS_FINISHED_WITH_MARK -+ LZMA_STATUS_NOT_FINISHED -+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK -+ SZ_ERROR_DATA - Data error -+ SZ_ERROR_MEM - Memory allocation error -+ SZ_ERROR_UNSUPPORTED - Unsupported properties -+ SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src). -+*/ -+ -+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, -+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, -+ ELzmaStatus *status, ISzAlloc *alloc); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif ---- /dev/null -+++ b/include/linux/lzma/LzmaEnc.h -@@ -0,0 +1,80 @@ -+/* LzmaEnc.h -- LZMA Encoder -+2009-02-07 : Igor Pavlov : Public domain */ -+ -+#ifndef __LZMA_ENC_H -+#define __LZMA_ENC_H -+ -+#include "Types.h" -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#define LZMA_PROPS_SIZE 5 -+ -+typedef struct _CLzmaEncProps -+{ -+ int level; /* 0 <= level <= 9 */ -+ UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version -+ (1 << 12) <= dictSize <= (1 << 30) for 64-bit version -+ default = (1 << 24) */ -+ int lc; /* 0 <= lc <= 8, default = 3 */ -+ int lp; /* 0 <= lp <= 4, default = 0 */ -+ int pb; /* 0 <= pb <= 4, default = 2 */ -+ int algo; /* 0 - fast, 1 - normal, default = 1 */ -+ int fb; /* 5 <= fb <= 273, default = 32 */ -+ int btMode; /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */ -+ int numHashBytes; /* 2, 3 or 4, default = 4 */ -+ UInt32 mc; /* 1 <= mc <= (1 << 30), default = 32 */ -+ unsigned writeEndMark; /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */ -+ int numThreads; /* 1 or 2, default = 2 */ -+} CLzmaEncProps; -+ -+void LzmaEncProps_Init(CLzmaEncProps *p); -+void LzmaEncProps_Normalize(CLzmaEncProps *p); -+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2); -+ -+ -+/* ---------- CLzmaEncHandle Interface ---------- */ -+ -+/* LzmaEnc_* functions can return the following exit codes: -+Returns: -+ SZ_OK - OK -+ SZ_ERROR_MEM - Memory allocation error -+ SZ_ERROR_PARAM - Incorrect paramater in props -+ SZ_ERROR_WRITE - Write callback error. -+ SZ_ERROR_PROGRESS - some break from progress callback -+ SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version) -+*/ -+ -+typedef void * CLzmaEncHandle; -+ -+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc); -+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig); -+SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props); -+SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size); -+SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream, -+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); -+SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, -+ int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); -+ -+/* ---------- One Call Interface ---------- */ -+ -+/* LzmaEncode -+Return code: -+ SZ_OK - OK -+ SZ_ERROR_MEM - Memory allocation error -+ SZ_ERROR_PARAM - Incorrect paramater -+ SZ_ERROR_OUTPUT_EOF - output buffer overflow -+ SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version) -+*/ -+ -+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, -+ const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark, -+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif ---- /dev/null -+++ b/include/linux/lzma/Types.h -@@ -0,0 +1,226 @@ -+/* Types.h -- Basic types -+2009-11-23 : Igor Pavlov : Public domain */ -+ -+#ifndef __7Z_TYPES_H -+#define __7Z_TYPES_H -+ -+#include -+ -+#ifdef _WIN32 -+#include -+#endif -+ -+#ifndef EXTERN_C_BEGIN -+#ifdef __cplusplus -+#define EXTERN_C_BEGIN extern "C" { -+#define EXTERN_C_END } -+#else -+#define EXTERN_C_BEGIN -+#define EXTERN_C_END -+#endif -+#endif -+ -+EXTERN_C_BEGIN -+ -+#define SZ_OK 0 -+ -+#define SZ_ERROR_DATA 1 -+#define SZ_ERROR_MEM 2 -+#define SZ_ERROR_CRC 3 -+#define SZ_ERROR_UNSUPPORTED 4 -+#define SZ_ERROR_PARAM 5 -+#define SZ_ERROR_INPUT_EOF 6 -+#define SZ_ERROR_OUTPUT_EOF 7 -+#define SZ_ERROR_READ 8 -+#define SZ_ERROR_WRITE 9 -+#define SZ_ERROR_PROGRESS 10 -+#define SZ_ERROR_FAIL 11 -+#define SZ_ERROR_THREAD 12 -+ -+#define SZ_ERROR_ARCHIVE 16 -+#define SZ_ERROR_NO_ARCHIVE 17 -+ -+typedef int SRes; -+ -+#ifdef _WIN32 -+typedef DWORD WRes; -+#else -+typedef int WRes; -+#endif -+ -+#ifndef RINOK -+#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; } -+#endif -+ -+typedef unsigned char Byte; -+typedef short Int16; -+typedef unsigned short UInt16; -+ -+#ifdef _LZMA_UINT32_IS_ULONG -+typedef long Int32; -+typedef unsigned long UInt32; -+#else -+typedef int Int32; -+typedef unsigned int UInt32; -+#endif -+ -+#ifdef _SZ_NO_INT_64 -+ -+/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers. -+ NOTES: Some code will work incorrectly in that case! */ -+ -+typedef long Int64; -+typedef unsigned long UInt64; -+ -+#else -+ -+#if defined(_MSC_VER) || defined(__BORLANDC__) -+typedef __int64 Int64; -+typedef unsigned __int64 UInt64; -+#else -+typedef long long int Int64; -+typedef unsigned long long int UInt64; -+#endif -+ -+#endif -+ -+#ifdef _LZMA_NO_SYSTEM_SIZE_T -+typedef UInt32 SizeT; -+#else -+typedef size_t SizeT; -+#endif -+ -+typedef int Bool; -+#define True 1 -+#define False 0 -+ -+ -+#ifdef _WIN32 -+#define MY_STD_CALL __stdcall -+#else -+#define MY_STD_CALL -+#endif -+ -+#ifdef _MSC_VER -+ -+#if _MSC_VER >= 1300 -+#define MY_NO_INLINE __declspec(noinline) -+#else -+#define MY_NO_INLINE -+#endif -+ -+#define MY_CDECL __cdecl -+#define MY_FAST_CALL __fastcall -+ -+#else -+ -+#define MY_CDECL -+#define MY_FAST_CALL -+ -+#endif -+ -+ -+/* The following interfaces use first parameter as pointer to structure */ -+ -+typedef struct -+{ -+ SRes (*Read)(void *p, void *buf, size_t *size); -+ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream. -+ (output(*size) < input(*size)) is allowed */ -+} ISeqInStream; -+ -+/* it can return SZ_ERROR_INPUT_EOF */ -+SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size); -+SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType); -+SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf); -+ -+typedef struct -+{ -+ size_t (*Write)(void *p, const void *buf, size_t size); -+ /* Returns: result - the number of actually written bytes. -+ (result < size) means error */ -+} ISeqOutStream; -+ -+typedef enum -+{ -+ SZ_SEEK_SET = 0, -+ SZ_SEEK_CUR = 1, -+ SZ_SEEK_END = 2 -+} ESzSeek; -+ -+typedef struct -+{ -+ SRes (*Read)(void *p, void *buf, size_t *size); /* same as ISeqInStream::Read */ -+ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin); -+} ISeekInStream; -+ -+typedef struct -+{ -+ SRes (*Look)(void *p, void **buf, size_t *size); -+ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream. -+ (output(*size) > input(*size)) is not allowed -+ (output(*size) < input(*size)) is allowed */ -+ SRes (*Skip)(void *p, size_t offset); -+ /* offset must be <= output(*size) of Look */ -+ -+ SRes (*Read)(void *p, void *buf, size_t *size); -+ /* reads directly (without buffer). It's same as ISeqInStream::Read */ -+ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin); -+} ILookInStream; -+ -+SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size); -+SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset); -+ -+/* reads via ILookInStream::Read */ -+SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType); -+SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size); -+ -+#define LookToRead_BUF_SIZE (1 << 14) -+ -+typedef struct -+{ -+ ILookInStream s; -+ ISeekInStream *realStream; -+ size_t pos; -+ size_t size; -+ Byte buf[LookToRead_BUF_SIZE]; -+} CLookToRead; -+ -+void LookToRead_CreateVTable(CLookToRead *p, int lookahead); -+void LookToRead_Init(CLookToRead *p); -+ -+typedef struct -+{ -+ ISeqInStream s; -+ ILookInStream *realStream; -+} CSecToLook; -+ -+void SecToLook_CreateVTable(CSecToLook *p); -+ -+typedef struct -+{ -+ ISeqInStream s; -+ ILookInStream *realStream; -+} CSecToRead; -+ -+void SecToRead_CreateVTable(CSecToRead *p); -+ -+typedef struct -+{ -+ SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize); -+ /* Returns: result. (result != SZ_OK) means break. -+ Value (UInt64)(Int64)-1 for size means unknown value. */ -+} ICompressProgress; -+ -+typedef struct -+{ -+ void *(*Alloc)(void *p, size_t size); -+ void (*Free)(void *p, void *address); /* address can be 0 */ -+} ISzAlloc; -+ -+#define IAlloc_Alloc(p, size) (p)->Alloc((p), size) -+#define IAlloc_Free(p, a) (p)->Free((p), a) -+ -+EXTERN_C_END -+ -+#endif ---- a/lib/Kconfig -+++ b/lib/Kconfig -@@ -118,6 +118,12 @@ config LZO_DECOMPRESS - - source "lib/xz/Kconfig" - -+config LZMA_COMPRESS -+ tristate -+ -+config LZMA_DECOMPRESS -+ tristate -+ - # - # These all provide a common interface (hence the apparent duplication with - # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.) ---- a/lib/Makefile -+++ b/lib/Makefile -@@ -2,6 +2,16 @@ - # Makefile for some libs needed in the kernel. - # - -+ifdef CONFIG_JFFS2_ZLIB -+ CONFIG_ZLIB_INFLATE:=y -+ CONFIG_ZLIB_DEFLATE:=y -+endif -+ -+ifdef CONFIG_JFFS2_LZMA -+ CONFIG_LZMA_DECOMPRESS:=y -+ CONFIG_LZMA_COMPRESS:=y -+endif -+ - ifdef CONFIG_FUNCTION_TRACER - ORIG_CFLAGS := $(KBUILD_CFLAGS) - KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS)) -@@ -73,6 +83,8 @@ obj-$(CONFIG_LZO_COMPRESS) += lzo/ - obj-$(CONFIG_LZO_DECOMPRESS) += lzo/ - obj-$(CONFIG_XZ_DEC) += xz/ - obj-$(CONFIG_RAID6_PQ) += raid6/ -+obj-$(CONFIG_LZMA_COMPRESS) += lzma/ -+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/ - - lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o - lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o ---- /dev/null -+++ b/lib/lzma/LzFind.c -@@ -0,0 +1,761 @@ -+/* LzFind.c -- Match finder for LZ algorithms -+2009-04-22 : Igor Pavlov : Public domain */ -+ -+#include -+ -+#include "LzFind.h" -+#include "LzHash.h" -+ -+#define kEmptyHashValue 0 -+#define kMaxValForNormalize ((UInt32)0xFFFFFFFF) -+#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */ -+#define kNormalizeMask (~(kNormalizeStepMin - 1)) -+#define kMaxHistorySize ((UInt32)3 << 30) -+ -+#define kStartMaxLen 3 -+ -+static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc) -+{ -+ if (!p->directInput) -+ { -+ alloc->Free(alloc, p->bufferBase); -+ p->bufferBase = 0; -+ } -+} -+ -+/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */ -+ -+static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc) -+{ -+ UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv; -+ if (p->directInput) -+ { -+ p->blockSize = blockSize; -+ return 1; -+ } -+ if (p->bufferBase == 0 || p->blockSize != blockSize) -+ { -+ LzInWindow_Free(p, alloc); -+ p->blockSize = blockSize; -+ p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize); -+ } -+ return (p->bufferBase != 0); -+} -+ -+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; } -+Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; } -+ -+UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; } -+ -+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue) -+{ -+ p->posLimit -= subValue; -+ p->pos -= subValue; -+ p->streamPos -= subValue; -+} -+ -+static void MatchFinder_ReadBlock(CMatchFinder *p) -+{ -+ if (p->streamEndWasReached || p->result != SZ_OK) -+ return; -+ if (p->directInput) -+ { -+ UInt32 curSize = 0xFFFFFFFF - p->streamPos; -+ if (curSize > p->directInputRem) -+ curSize = (UInt32)p->directInputRem; -+ p->directInputRem -= curSize; -+ p->streamPos += curSize; -+ if (p->directInputRem == 0) -+ p->streamEndWasReached = 1; -+ return; -+ } -+ for (;;) -+ { -+ Byte *dest = p->buffer + (p->streamPos - p->pos); -+ size_t size = (p->bufferBase + p->blockSize - dest); -+ if (size == 0) -+ return; -+ p->result = p->stream->Read(p->stream, dest, &size); -+ if (p->result != SZ_OK) -+ return; -+ if (size == 0) -+ { -+ p->streamEndWasReached = 1; -+ return; -+ } -+ p->streamPos += (UInt32)size; -+ if (p->streamPos - p->pos > p->keepSizeAfter) -+ return; -+ } -+} -+ -+void MatchFinder_MoveBlock(CMatchFinder *p) -+{ -+ memmove(p->bufferBase, -+ p->buffer - p->keepSizeBefore, -+ (size_t)(p->streamPos - p->pos + p->keepSizeBefore)); -+ p->buffer = p->bufferBase + p->keepSizeBefore; -+} -+ -+int MatchFinder_NeedMove(CMatchFinder *p) -+{ -+ if (p->directInput) -+ return 0; -+ /* if (p->streamEndWasReached) return 0; */ -+ return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter); -+} -+ -+void MatchFinder_ReadIfRequired(CMatchFinder *p) -+{ -+ if (p->streamEndWasReached) -+ return; -+ if (p->keepSizeAfter >= p->streamPos - p->pos) -+ MatchFinder_ReadBlock(p); -+} -+ -+static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p) -+{ -+ if (MatchFinder_NeedMove(p)) -+ MatchFinder_MoveBlock(p); -+ MatchFinder_ReadBlock(p); -+} -+ -+static void MatchFinder_SetDefaultSettings(CMatchFinder *p) -+{ -+ p->cutValue = 32; -+ p->btMode = 1; -+ p->numHashBytes = 4; -+ p->bigHash = 0; -+} -+ -+#define kCrcPoly 0xEDB88320 -+ -+void MatchFinder_Construct(CMatchFinder *p) -+{ -+ UInt32 i; -+ p->bufferBase = 0; -+ p->directInput = 0; -+ p->hash = 0; -+ MatchFinder_SetDefaultSettings(p); -+ -+ for (i = 0; i < 256; i++) -+ { -+ UInt32 r = i; -+ int j; -+ for (j = 0; j < 8; j++) -+ r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1)); -+ p->crc[i] = r; -+ } -+} -+ -+static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc) -+{ -+ alloc->Free(alloc, p->hash); -+ p->hash = 0; -+} -+ -+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc) -+{ -+ MatchFinder_FreeThisClassMemory(p, alloc); -+ LzInWindow_Free(p, alloc); -+} -+ -+static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc) -+{ -+ size_t sizeInBytes = (size_t)num * sizeof(CLzRef); -+ if (sizeInBytes / sizeof(CLzRef) != num) -+ return 0; -+ return (CLzRef *)alloc->Alloc(alloc, sizeInBytes); -+} -+ -+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize, -+ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter, -+ ISzAlloc *alloc) -+{ -+ UInt32 sizeReserv; -+ if (historySize > kMaxHistorySize) -+ { -+ MatchFinder_Free(p, alloc); -+ return 0; -+ } -+ sizeReserv = historySize >> 1; -+ if (historySize > ((UInt32)2 << 30)) -+ sizeReserv = historySize >> 2; -+ sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19); -+ -+ p->keepSizeBefore = historySize + keepAddBufferBefore + 1; -+ p->keepSizeAfter = matchMaxLen + keepAddBufferAfter; -+ /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */ -+ if (LzInWindow_Create(p, sizeReserv, alloc)) -+ { -+ UInt32 newCyclicBufferSize = historySize + 1; -+ UInt32 hs; -+ p->matchMaxLen = matchMaxLen; -+ { -+ p->fixedHashSize = 0; -+ if (p->numHashBytes == 2) -+ hs = (1 << 16) - 1; -+ else -+ { -+ hs = historySize - 1; -+ hs |= (hs >> 1); -+ hs |= (hs >> 2); -+ hs |= (hs >> 4); -+ hs |= (hs >> 8); -+ hs >>= 1; -+ hs |= 0xFFFF; /* don't change it! It's required for Deflate */ -+ if (hs > (1 << 24)) -+ { -+ if (p->numHashBytes == 3) -+ hs = (1 << 24) - 1; -+ else -+ hs >>= 1; -+ } -+ } -+ p->hashMask = hs; -+ hs++; -+ if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size; -+ if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size; -+ if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size; -+ hs += p->fixedHashSize; -+ } -+ -+ { -+ UInt32 prevSize = p->hashSizeSum + p->numSons; -+ UInt32 newSize; -+ p->historySize = historySize; -+ p->hashSizeSum = hs; -+ p->cyclicBufferSize = newCyclicBufferSize; -+ p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize); -+ newSize = p->hashSizeSum + p->numSons; -+ if (p->hash != 0 && prevSize == newSize) -+ return 1; -+ MatchFinder_FreeThisClassMemory(p, alloc); -+ p->hash = AllocRefs(newSize, alloc); -+ if (p->hash != 0) -+ { -+ p->son = p->hash + p->hashSizeSum; -+ return 1; -+ } -+ } -+ } -+ MatchFinder_Free(p, alloc); -+ return 0; -+} -+ -+static void MatchFinder_SetLimits(CMatchFinder *p) -+{ -+ UInt32 limit = kMaxValForNormalize - p->pos; -+ UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos; -+ if (limit2 < limit) -+ limit = limit2; -+ limit2 = p->streamPos - p->pos; -+ if (limit2 <= p->keepSizeAfter) -+ { -+ if (limit2 > 0) -+ limit2 = 1; -+ } -+ else -+ limit2 -= p->keepSizeAfter; -+ if (limit2 < limit) -+ limit = limit2; -+ { -+ UInt32 lenLimit = p->streamPos - p->pos; -+ if (lenLimit > p->matchMaxLen) -+ lenLimit = p->matchMaxLen; -+ p->lenLimit = lenLimit; -+ } -+ p->posLimit = p->pos + limit; -+} -+ -+void MatchFinder_Init(CMatchFinder *p) -+{ -+ UInt32 i; -+ for (i = 0; i < p->hashSizeSum; i++) -+ p->hash[i] = kEmptyHashValue; -+ p->cyclicBufferPos = 0; -+ p->buffer = p->bufferBase; -+ p->pos = p->streamPos = p->cyclicBufferSize; -+ p->result = SZ_OK; -+ p->streamEndWasReached = 0; -+ MatchFinder_ReadBlock(p); -+ MatchFinder_SetLimits(p); -+} -+ -+static UInt32 MatchFinder_GetSubValue(CMatchFinder *p) -+{ -+ return (p->pos - p->historySize - 1) & kNormalizeMask; -+} -+ -+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems) -+{ -+ UInt32 i; -+ for (i = 0; i < numItems; i++) -+ { -+ UInt32 value = items[i]; -+ if (value <= subValue) -+ value = kEmptyHashValue; -+ else -+ value -= subValue; -+ items[i] = value; -+ } -+} -+ -+static void MatchFinder_Normalize(CMatchFinder *p) -+{ -+ UInt32 subValue = MatchFinder_GetSubValue(p); -+ MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons); -+ MatchFinder_ReduceOffsets(p, subValue); -+} -+ -+static void MatchFinder_CheckLimits(CMatchFinder *p) -+{ -+ if (p->pos == kMaxValForNormalize) -+ MatchFinder_Normalize(p); -+ if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos) -+ MatchFinder_CheckAndMoveAndRead(p); -+ if (p->cyclicBufferPos == p->cyclicBufferSize) -+ p->cyclicBufferPos = 0; -+ MatchFinder_SetLimits(p); -+} -+ -+static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, -+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue, -+ UInt32 *distances, UInt32 maxLen) -+{ -+ son[_cyclicBufferPos] = curMatch; -+ for (;;) -+ { -+ UInt32 delta = pos - curMatch; -+ if (cutValue-- == 0 || delta >= _cyclicBufferSize) -+ return distances; -+ { -+ const Byte *pb = cur - delta; -+ curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)]; -+ if (pb[maxLen] == cur[maxLen] && *pb == *cur) -+ { -+ UInt32 len = 0; -+ while (++len != lenLimit) -+ if (pb[len] != cur[len]) -+ break; -+ if (maxLen < len) -+ { -+ *distances++ = maxLen = len; -+ *distances++ = delta - 1; -+ if (len == lenLimit) -+ return distances; -+ } -+ } -+ } -+ } -+} -+ -+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, -+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue, -+ UInt32 *distances, UInt32 maxLen) -+{ -+ CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1; -+ CLzRef *ptr1 = son + (_cyclicBufferPos << 1); -+ UInt32 len0 = 0, len1 = 0; -+ for (;;) -+ { -+ UInt32 delta = pos - curMatch; -+ if (cutValue-- == 0 || delta >= _cyclicBufferSize) -+ { -+ *ptr0 = *ptr1 = kEmptyHashValue; -+ return distances; -+ } -+ { -+ CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1); -+ const Byte *pb = cur - delta; -+ UInt32 len = (len0 < len1 ? len0 : len1); -+ if (pb[len] == cur[len]) -+ { -+ if (++len != lenLimit && pb[len] == cur[len]) -+ while (++len != lenLimit) -+ if (pb[len] != cur[len]) -+ break; -+ if (maxLen < len) -+ { -+ *distances++ = maxLen = len; -+ *distances++ = delta - 1; -+ if (len == lenLimit) -+ { -+ *ptr1 = pair[0]; -+ *ptr0 = pair[1]; -+ return distances; -+ } -+ } -+ } -+ if (pb[len] < cur[len]) -+ { -+ *ptr1 = curMatch; -+ ptr1 = pair + 1; -+ curMatch = *ptr1; -+ len1 = len; -+ } -+ else -+ { -+ *ptr0 = curMatch; -+ ptr0 = pair; -+ curMatch = *ptr0; -+ len0 = len; -+ } -+ } -+ } -+} -+ -+static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, -+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue) -+{ -+ CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1; -+ CLzRef *ptr1 = son + (_cyclicBufferPos << 1); -+ UInt32 len0 = 0, len1 = 0; -+ for (;;) -+ { -+ UInt32 delta = pos - curMatch; -+ if (cutValue-- == 0 || delta >= _cyclicBufferSize) -+ { -+ *ptr0 = *ptr1 = kEmptyHashValue; -+ return; -+ } -+ { -+ CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1); -+ const Byte *pb = cur - delta; -+ UInt32 len = (len0 < len1 ? len0 : len1); -+ if (pb[len] == cur[len]) -+ { -+ while (++len != lenLimit) -+ if (pb[len] != cur[len]) -+ break; -+ { -+ if (len == lenLimit) -+ { -+ *ptr1 = pair[0]; -+ *ptr0 = pair[1]; -+ return; -+ } -+ } -+ } -+ if (pb[len] < cur[len]) -+ { -+ *ptr1 = curMatch; -+ ptr1 = pair + 1; -+ curMatch = *ptr1; -+ len1 = len; -+ } -+ else -+ { -+ *ptr0 = curMatch; -+ ptr0 = pair; -+ curMatch = *ptr0; -+ len0 = len; -+ } -+ } -+ } -+} -+ -+#define MOVE_POS \ -+ ++p->cyclicBufferPos; \ -+ p->buffer++; \ -+ if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p); -+ -+#define MOVE_POS_RET MOVE_POS return offset; -+ -+static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; } -+ -+#define GET_MATCHES_HEADER2(minLen, ret_op) \ -+ UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \ -+ lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \ -+ cur = p->buffer; -+ -+#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0) -+#define SKIP_HEADER(minLen) GET_MATCHES_HEADER2(minLen, continue) -+ -+#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue -+ -+#define GET_MATCHES_FOOTER(offset, maxLen) \ -+ offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \ -+ distances + offset, maxLen) - distances); MOVE_POS_RET; -+ -+#define SKIP_FOOTER \ -+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS; -+ -+static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) -+{ -+ UInt32 offset; -+ GET_MATCHES_HEADER(2) -+ HASH2_CALC; -+ curMatch = p->hash[hashValue]; -+ p->hash[hashValue] = p->pos; -+ offset = 0; -+ GET_MATCHES_FOOTER(offset, 1) -+} -+ -+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) -+{ -+ UInt32 offset; -+ GET_MATCHES_HEADER(3) -+ HASH_ZIP_CALC; -+ curMatch = p->hash[hashValue]; -+ p->hash[hashValue] = p->pos; -+ offset = 0; -+ GET_MATCHES_FOOTER(offset, 2) -+} -+ -+static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) -+{ -+ UInt32 hash2Value, delta2, maxLen, offset; -+ GET_MATCHES_HEADER(3) -+ -+ HASH3_CALC; -+ -+ delta2 = p->pos - p->hash[hash2Value]; -+ curMatch = p->hash[kFix3HashSize + hashValue]; -+ -+ p->hash[hash2Value] = -+ p->hash[kFix3HashSize + hashValue] = p->pos; -+ -+ -+ maxLen = 2; -+ offset = 0; -+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur) -+ { -+ for (; maxLen != lenLimit; maxLen++) -+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen]) -+ break; -+ distances[0] = maxLen; -+ distances[1] = delta2 - 1; -+ offset = 2; -+ if (maxLen == lenLimit) -+ { -+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); -+ MOVE_POS_RET; -+ } -+ } -+ GET_MATCHES_FOOTER(offset, maxLen) -+} -+ -+static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) -+{ -+ UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset; -+ GET_MATCHES_HEADER(4) -+ -+ HASH4_CALC; -+ -+ delta2 = p->pos - p->hash[ hash2Value]; -+ delta3 = p->pos - p->hash[kFix3HashSize + hash3Value]; -+ curMatch = p->hash[kFix4HashSize + hashValue]; -+ -+ p->hash[ hash2Value] = -+ p->hash[kFix3HashSize + hash3Value] = -+ p->hash[kFix4HashSize + hashValue] = p->pos; -+ -+ maxLen = 1; -+ offset = 0; -+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur) -+ { -+ distances[0] = maxLen = 2; -+ distances[1] = delta2 - 1; -+ offset = 2; -+ } -+ if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur) -+ { -+ maxLen = 3; -+ distances[offset + 1] = delta3 - 1; -+ offset += 2; -+ delta2 = delta3; -+ } -+ if (offset != 0) -+ { -+ for (; maxLen != lenLimit; maxLen++) -+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen]) -+ break; -+ distances[offset - 2] = maxLen; -+ if (maxLen == lenLimit) -+ { -+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); -+ MOVE_POS_RET; -+ } -+ } -+ if (maxLen < 3) -+ maxLen = 3; -+ GET_MATCHES_FOOTER(offset, maxLen) -+} -+ -+static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) -+{ -+ UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset; -+ GET_MATCHES_HEADER(4) -+ -+ HASH4_CALC; -+ -+ delta2 = p->pos - p->hash[ hash2Value]; -+ delta3 = p->pos - p->hash[kFix3HashSize + hash3Value]; -+ curMatch = p->hash[kFix4HashSize + hashValue]; -+ -+ p->hash[ hash2Value] = -+ p->hash[kFix3HashSize + hash3Value] = -+ p->hash[kFix4HashSize + hashValue] = p->pos; -+ -+ maxLen = 1; -+ offset = 0; -+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur) -+ { -+ distances[0] = maxLen = 2; -+ distances[1] = delta2 - 1; -+ offset = 2; -+ } -+ if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur) -+ { -+ maxLen = 3; -+ distances[offset + 1] = delta3 - 1; -+ offset += 2; -+ delta2 = delta3; -+ } -+ if (offset != 0) -+ { -+ for (; maxLen != lenLimit; maxLen++) -+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen]) -+ break; -+ distances[offset - 2] = maxLen; -+ if (maxLen == lenLimit) -+ { -+ p->son[p->cyclicBufferPos] = curMatch; -+ MOVE_POS_RET; -+ } -+ } -+ if (maxLen < 3) -+ maxLen = 3; -+ offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p), -+ distances + offset, maxLen) - (distances)); -+ MOVE_POS_RET -+} -+ -+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) -+{ -+ UInt32 offset; -+ GET_MATCHES_HEADER(3) -+ HASH_ZIP_CALC; -+ curMatch = p->hash[hashValue]; -+ p->hash[hashValue] = p->pos; -+ offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p), -+ distances, 2) - (distances)); -+ MOVE_POS_RET -+} -+ -+static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num) -+{ -+ do -+ { -+ SKIP_HEADER(2) -+ HASH2_CALC; -+ curMatch = p->hash[hashValue]; -+ p->hash[hashValue] = p->pos; -+ SKIP_FOOTER -+ } -+ while (--num != 0); -+} -+ -+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num) -+{ -+ do -+ { -+ SKIP_HEADER(3) -+ HASH_ZIP_CALC; -+ curMatch = p->hash[hashValue]; -+ p->hash[hashValue] = p->pos; -+ SKIP_FOOTER -+ } -+ while (--num != 0); -+} -+ -+static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num) -+{ -+ do -+ { -+ UInt32 hash2Value; -+ SKIP_HEADER(3) -+ HASH3_CALC; -+ curMatch = p->hash[kFix3HashSize + hashValue]; -+ p->hash[hash2Value] = -+ p->hash[kFix3HashSize + hashValue] = p->pos; -+ SKIP_FOOTER -+ } -+ while (--num != 0); -+} -+ -+static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num) -+{ -+ do -+ { -+ UInt32 hash2Value, hash3Value; -+ SKIP_HEADER(4) -+ HASH4_CALC; -+ curMatch = p->hash[kFix4HashSize + hashValue]; -+ p->hash[ hash2Value] = -+ p->hash[kFix3HashSize + hash3Value] = p->pos; -+ p->hash[kFix4HashSize + hashValue] = p->pos; -+ SKIP_FOOTER -+ } -+ while (--num != 0); -+} -+ -+static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num) -+{ -+ do -+ { -+ UInt32 hash2Value, hash3Value; -+ SKIP_HEADER(4) -+ HASH4_CALC; -+ curMatch = p->hash[kFix4HashSize + hashValue]; -+ p->hash[ hash2Value] = -+ p->hash[kFix3HashSize + hash3Value] = -+ p->hash[kFix4HashSize + hashValue] = p->pos; -+ p->son[p->cyclicBufferPos] = curMatch; -+ MOVE_POS -+ } -+ while (--num != 0); -+} -+ -+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num) -+{ -+ do -+ { -+ SKIP_HEADER(3) -+ HASH_ZIP_CALC; -+ curMatch = p->hash[hashValue]; -+ p->hash[hashValue] = p->pos; -+ p->son[p->cyclicBufferPos] = curMatch; -+ MOVE_POS -+ } -+ while (--num != 0); -+} -+ -+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable) -+{ -+ vTable->Init = (Mf_Init_Func)MatchFinder_Init; -+ vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte; -+ vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes; -+ vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos; -+ if (!p->btMode) -+ { -+ vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches; -+ vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip; -+ } -+ else if (p->numHashBytes == 2) -+ { -+ vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches; -+ vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip; -+ } -+ else if (p->numHashBytes == 3) -+ { -+ vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches; -+ vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip; -+ } -+ else -+ { -+ vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches; -+ vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip; -+ } -+} ---- /dev/null -+++ b/lib/lzma/LzmaDec.c -@@ -0,0 +1,999 @@ -+/* LzmaDec.c -- LZMA Decoder -+2009-09-20 : Igor Pavlov : Public domain */ -+ -+#include "LzmaDec.h" -+ -+#include -+ -+#define kNumTopBits 24 -+#define kTopValue ((UInt32)1 << kNumTopBits) -+ -+#define kNumBitModelTotalBits 11 -+#define kBitModelTotal (1 << kNumBitModelTotalBits) -+#define kNumMoveBits 5 -+ -+#define RC_INIT_SIZE 5 -+ -+#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); } -+ -+#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound) -+#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits)); -+#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits)); -+#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \ -+ { UPDATE_0(p); i = (i + i); A0; } else \ -+ { UPDATE_1(p); i = (i + i) + 1; A1; } -+#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;) -+ -+#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); } -+#define TREE_DECODE(probs, limit, i) \ -+ { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; } -+ -+/* #define _LZMA_SIZE_OPT */ -+ -+#ifdef _LZMA_SIZE_OPT -+#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i) -+#else -+#define TREE_6_DECODE(probs, i) \ -+ { i = 1; \ -+ TREE_GET_BIT(probs, i); \ -+ TREE_GET_BIT(probs, i); \ -+ TREE_GET_BIT(probs, i); \ -+ TREE_GET_BIT(probs, i); \ -+ TREE_GET_BIT(probs, i); \ -+ TREE_GET_BIT(probs, i); \ -+ i -= 0x40; } -+#endif -+ -+#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); } -+ -+#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound) -+#define UPDATE_0_CHECK range = bound; -+#define UPDATE_1_CHECK range -= bound; code -= bound; -+#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \ -+ { UPDATE_0_CHECK; i = (i + i); A0; } else \ -+ { UPDATE_1_CHECK; i = (i + i) + 1; A1; } -+#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;) -+#define TREE_DECODE_CHECK(probs, limit, i) \ -+ { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; } -+ -+ -+#define kNumPosBitsMax 4 -+#define kNumPosStatesMax (1 << kNumPosBitsMax) -+ -+#define kLenNumLowBits 3 -+#define kLenNumLowSymbols (1 << kLenNumLowBits) -+#define kLenNumMidBits 3 -+#define kLenNumMidSymbols (1 << kLenNumMidBits) -+#define kLenNumHighBits 8 -+#define kLenNumHighSymbols (1 << kLenNumHighBits) -+ -+#define LenChoice 0 -+#define LenChoice2 (LenChoice + 1) -+#define LenLow (LenChoice2 + 1) -+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) -+ -+ -+#define kNumStates 12 -+#define kNumLitStates 7 -+ -+#define kStartPosModelIndex 4 -+#define kEndPosModelIndex 14 -+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) -+ -+#define kNumPosSlotBits 6 -+#define kNumLenToPosStates 4 -+ -+#define kNumAlignBits 4 -+#define kAlignTableSize (1 << kNumAlignBits) -+ -+#define kMatchMinLen 2 -+#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols) -+ -+#define IsMatch 0 -+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -+#define IsRepG0 (IsRep + kNumStates) -+#define IsRepG1 (IsRepG0 + kNumStates) -+#define IsRepG2 (IsRepG1 + kNumStates) -+#define IsRep0Long (IsRepG2 + kNumStates) -+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -+#define LenCoder (Align + kAlignTableSize) -+#define RepLenCoder (LenCoder + kNumLenProbs) -+#define Literal (RepLenCoder + kNumLenProbs) -+ -+#define LZMA_BASE_SIZE 1846 -+#define LZMA_LIT_SIZE 768 -+ -+#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp))) -+ -+#if Literal != LZMA_BASE_SIZE -+StopCompilingDueBUG -+#endif -+ -+#define LZMA_DIC_MIN (1 << 12) -+ -+/* First LZMA-symbol is always decoded. -+And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization -+Out: -+ Result: -+ SZ_OK - OK -+ SZ_ERROR_DATA - Error -+ p->remainLen: -+ < kMatchSpecLenStart : normal remain -+ = kMatchSpecLenStart : finished -+ = kMatchSpecLenStart + 1 : Flush marker -+ = kMatchSpecLenStart + 2 : State Init Marker -+*/ -+ -+static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit) -+{ -+ CLzmaProb *probs = p->probs; -+ -+ unsigned state = p->state; -+ UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3]; -+ unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1; -+ unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1; -+ unsigned lc = p->prop.lc; -+ -+ Byte *dic = p->dic; -+ SizeT dicBufSize = p->dicBufSize; -+ SizeT dicPos = p->dicPos; -+ -+ UInt32 processedPos = p->processedPos; -+ UInt32 checkDicSize = p->checkDicSize; -+ unsigned len = 0; -+ -+ const Byte *buf = p->buf; -+ UInt32 range = p->range; -+ UInt32 code = p->code; -+ -+ do -+ { -+ CLzmaProb *prob; -+ UInt32 bound; -+ unsigned ttt; -+ unsigned posState = processedPos & pbMask; -+ -+ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState; -+ IF_BIT_0(prob) -+ { -+ unsigned symbol; -+ UPDATE_0(prob); -+ prob = probs + Literal; -+ if (checkDicSize != 0 || processedPos != 0) -+ prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) + -+ (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc)))); -+ -+ if (state < kNumLitStates) -+ { -+ state -= (state < 4) ? state : 3; -+ symbol = 1; -+ do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100); -+ } -+ else -+ { -+ unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)]; -+ unsigned offs = 0x100; -+ state -= (state < 10) ? 3 : 6; -+ symbol = 1; -+ do -+ { -+ unsigned bit; -+ CLzmaProb *probLit; -+ matchByte <<= 1; -+ bit = (matchByte & offs); -+ probLit = prob + offs + bit + symbol; -+ GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit) -+ } -+ while (symbol < 0x100); -+ } -+ dic[dicPos++] = (Byte)symbol; -+ processedPos++; -+ continue; -+ } -+ else -+ { -+ UPDATE_1(prob); -+ prob = probs + IsRep + state; -+ IF_BIT_0(prob) -+ { -+ UPDATE_0(prob); -+ state += kNumStates; -+ prob = probs + LenCoder; -+ } -+ else -+ { -+ UPDATE_1(prob); -+ if (checkDicSize == 0 && processedPos == 0) -+ return SZ_ERROR_DATA; -+ prob = probs + IsRepG0 + state; -+ IF_BIT_0(prob) -+ { -+ UPDATE_0(prob); -+ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState; -+ IF_BIT_0(prob) -+ { -+ UPDATE_0(prob); -+ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)]; -+ dicPos++; -+ processedPos++; -+ state = state < kNumLitStates ? 9 : 11; -+ continue; -+ } -+ UPDATE_1(prob); -+ } -+ else -+ { -+ UInt32 distance; -+ UPDATE_1(prob); -+ prob = probs + IsRepG1 + state; -+ IF_BIT_0(prob) -+ { -+ UPDATE_0(prob); -+ distance = rep1; -+ } -+ else -+ { -+ UPDATE_1(prob); -+ prob = probs + IsRepG2 + state; -+ IF_BIT_0(prob) -+ { -+ UPDATE_0(prob); -+ distance = rep2; -+ } -+ else -+ { -+ UPDATE_1(prob); -+ distance = rep3; -+ rep3 = rep2; -+ } -+ rep2 = rep1; -+ } -+ rep1 = rep0; -+ rep0 = distance; -+ } -+ state = state < kNumLitStates ? 8 : 11; -+ prob = probs + RepLenCoder; -+ } -+ { -+ unsigned limit, offset; -+ CLzmaProb *probLen = prob + LenChoice; -+ IF_BIT_0(probLen) -+ { -+ UPDATE_0(probLen); -+ probLen = prob + LenLow + (posState << kLenNumLowBits); -+ offset = 0; -+ limit = (1 << kLenNumLowBits); -+ } -+ else -+ { -+ UPDATE_1(probLen); -+ probLen = prob + LenChoice2; -+ IF_BIT_0(probLen) -+ { -+ UPDATE_0(probLen); -+ probLen = prob + LenMid + (posState << kLenNumMidBits); -+ offset = kLenNumLowSymbols; -+ limit = (1 << kLenNumMidBits); -+ } -+ else -+ { -+ UPDATE_1(probLen); -+ probLen = prob + LenHigh; -+ offset = kLenNumLowSymbols + kLenNumMidSymbols; -+ limit = (1 << kLenNumHighBits); -+ } -+ } -+ TREE_DECODE(probLen, limit, len); -+ len += offset; -+ } -+ -+ if (state >= kNumStates) -+ { -+ UInt32 distance; -+ prob = probs + PosSlot + -+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits); -+ TREE_6_DECODE(prob, distance); -+ if (distance >= kStartPosModelIndex) -+ { -+ unsigned posSlot = (unsigned)distance; -+ int numDirectBits = (int)(((distance >> 1) - 1)); -+ distance = (2 | (distance & 1)); -+ if (posSlot < kEndPosModelIndex) -+ { -+ distance <<= numDirectBits; -+ prob = probs + SpecPos + distance - posSlot - 1; -+ { -+ UInt32 mask = 1; -+ unsigned i = 1; -+ do -+ { -+ GET_BIT2(prob + i, i, ; , distance |= mask); -+ mask <<= 1; -+ } -+ while (--numDirectBits != 0); -+ } -+ } -+ else -+ { -+ numDirectBits -= kNumAlignBits; -+ do -+ { -+ NORMALIZE -+ range >>= 1; -+ -+ { -+ UInt32 t; -+ code -= range; -+ t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */ -+ distance = (distance << 1) + (t + 1); -+ code += range & t; -+ } -+ /* -+ distance <<= 1; -+ if (code >= range) -+ { -+ code -= range; -+ distance |= 1; -+ } -+ */ -+ } -+ while (--numDirectBits != 0); -+ prob = probs + Align; -+ distance <<= kNumAlignBits; -+ { -+ unsigned i = 1; -+ GET_BIT2(prob + i, i, ; , distance |= 1); -+ GET_BIT2(prob + i, i, ; , distance |= 2); -+ GET_BIT2(prob + i, i, ; , distance |= 4); -+ GET_BIT2(prob + i, i, ; , distance |= 8); -+ } -+ if (distance == (UInt32)0xFFFFFFFF) -+ { -+ len += kMatchSpecLenStart; -+ state -= kNumStates; -+ break; -+ } -+ } -+ } -+ rep3 = rep2; -+ rep2 = rep1; -+ rep1 = rep0; -+ rep0 = distance + 1; -+ if (checkDicSize == 0) -+ { -+ if (distance >= processedPos) -+ return SZ_ERROR_DATA; -+ } -+ else if (distance >= checkDicSize) -+ return SZ_ERROR_DATA; -+ state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3; -+ } -+ -+ len += kMatchMinLen; -+ -+ if (limit == dicPos) -+ return SZ_ERROR_DATA; -+ { -+ SizeT rem = limit - dicPos; -+ unsigned curLen = ((rem < len) ? (unsigned)rem : len); -+ SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0); -+ -+ processedPos += curLen; -+ -+ len -= curLen; -+ if (pos + curLen <= dicBufSize) -+ { -+ Byte *dest = dic + dicPos; -+ ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos; -+ const Byte *lim = dest + curLen; -+ dicPos += curLen; -+ do -+ *(dest) = (Byte)*(dest + src); -+ while (++dest != lim); -+ } -+ else -+ { -+ do -+ { -+ dic[dicPos++] = dic[pos]; -+ if (++pos == dicBufSize) -+ pos = 0; -+ } -+ while (--curLen != 0); -+ } -+ } -+ } -+ } -+ while (dicPos < limit && buf < bufLimit); -+ NORMALIZE; -+ p->buf = buf; -+ p->range = range; -+ p->code = code; -+ p->remainLen = len; -+ p->dicPos = dicPos; -+ p->processedPos = processedPos; -+ p->reps[0] = rep0; -+ p->reps[1] = rep1; -+ p->reps[2] = rep2; -+ p->reps[3] = rep3; -+ p->state = state; -+ -+ return SZ_OK; -+} -+ -+static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit) -+{ -+ if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart) -+ { -+ Byte *dic = p->dic; -+ SizeT dicPos = p->dicPos; -+ SizeT dicBufSize = p->dicBufSize; -+ unsigned len = p->remainLen; -+ UInt32 rep0 = p->reps[0]; -+ if (limit - dicPos < len) -+ len = (unsigned)(limit - dicPos); -+ -+ if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len) -+ p->checkDicSize = p->prop.dicSize; -+ -+ p->processedPos += len; -+ p->remainLen -= len; -+ while (len-- != 0) -+ { -+ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)]; -+ dicPos++; -+ } -+ p->dicPos = dicPos; -+ } -+} -+ -+static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit) -+{ -+ do -+ { -+ SizeT limit2 = limit; -+ if (p->checkDicSize == 0) -+ { -+ UInt32 rem = p->prop.dicSize - p->processedPos; -+ if (limit - p->dicPos > rem) -+ limit2 = p->dicPos + rem; -+ } -+ RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit)); -+ if (p->processedPos >= p->prop.dicSize) -+ p->checkDicSize = p->prop.dicSize; -+ LzmaDec_WriteRem(p, limit); -+ } -+ while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart); -+ -+ if (p->remainLen > kMatchSpecLenStart) -+ { -+ p->remainLen = kMatchSpecLenStart; -+ } -+ return 0; -+} -+ -+typedef enum -+{ -+ DUMMY_ERROR, /* unexpected end of input stream */ -+ DUMMY_LIT, -+ DUMMY_MATCH, -+ DUMMY_REP -+} ELzmaDummy; -+ -+static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize) -+{ -+ UInt32 range = p->range; -+ UInt32 code = p->code; -+ const Byte *bufLimit = buf + inSize; -+ CLzmaProb *probs = p->probs; -+ unsigned state = p->state; -+ ELzmaDummy res; -+ -+ { -+ CLzmaProb *prob; -+ UInt32 bound; -+ unsigned ttt; -+ unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1); -+ -+ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState; -+ IF_BIT_0_CHECK(prob) -+ { -+ UPDATE_0_CHECK -+ -+ /* if (bufLimit - buf >= 7) return DUMMY_LIT; */ -+ -+ prob = probs + Literal; -+ if (p->checkDicSize != 0 || p->processedPos != 0) -+ prob += (LZMA_LIT_SIZE * -+ ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) + -+ (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc)))); -+ -+ if (state < kNumLitStates) -+ { -+ unsigned symbol = 1; -+ do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100); -+ } -+ else -+ { -+ unsigned matchByte = p->dic[p->dicPos - p->reps[0] + -+ ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)]; -+ unsigned offs = 0x100; -+ unsigned symbol = 1; -+ do -+ { -+ unsigned bit; -+ CLzmaProb *probLit; -+ matchByte <<= 1; -+ bit = (matchByte & offs); -+ probLit = prob + offs + bit + symbol; -+ GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit) -+ } -+ while (symbol < 0x100); -+ } -+ res = DUMMY_LIT; -+ } -+ else -+ { -+ unsigned len; -+ UPDATE_1_CHECK; -+ -+ prob = probs + IsRep + state; -+ IF_BIT_0_CHECK(prob) -+ { -+ UPDATE_0_CHECK; -+ state = 0; -+ prob = probs + LenCoder; -+ res = DUMMY_MATCH; -+ } -+ else -+ { -+ UPDATE_1_CHECK; -+ res = DUMMY_REP; -+ prob = probs + IsRepG0 + state; -+ IF_BIT_0_CHECK(prob) -+ { -+ UPDATE_0_CHECK; -+ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState; -+ IF_BIT_0_CHECK(prob) -+ { -+ UPDATE_0_CHECK; -+ NORMALIZE_CHECK; -+ return DUMMY_REP; -+ } -+ else -+ { -+ UPDATE_1_CHECK; -+ } -+ } -+ else -+ { -+ UPDATE_1_CHECK; -+ prob = probs + IsRepG1 + state; -+ IF_BIT_0_CHECK(prob) -+ { -+ UPDATE_0_CHECK; -+ } -+ else -+ { -+ UPDATE_1_CHECK; -+ prob = probs + IsRepG2 + state; -+ IF_BIT_0_CHECK(prob) -+ { -+ UPDATE_0_CHECK; -+ } -+ else -+ { -+ UPDATE_1_CHECK; -+ } -+ } -+ } -+ state = kNumStates; -+ prob = probs + RepLenCoder; -+ } -+ { -+ unsigned limit, offset; -+ CLzmaProb *probLen = prob + LenChoice; -+ IF_BIT_0_CHECK(probLen) -+ { -+ UPDATE_0_CHECK; -+ probLen = prob + LenLow + (posState << kLenNumLowBits); -+ offset = 0; -+ limit = 1 << kLenNumLowBits; -+ } -+ else -+ { -+ UPDATE_1_CHECK; -+ probLen = prob + LenChoice2; -+ IF_BIT_0_CHECK(probLen) -+ { -+ UPDATE_0_CHECK; -+ probLen = prob + LenMid + (posState << kLenNumMidBits); -+ offset = kLenNumLowSymbols; -+ limit = 1 << kLenNumMidBits; -+ } -+ else -+ { -+ UPDATE_1_CHECK; -+ probLen = prob + LenHigh; -+ offset = kLenNumLowSymbols + kLenNumMidSymbols; -+ limit = 1 << kLenNumHighBits; -+ } -+ } -+ TREE_DECODE_CHECK(probLen, limit, len); -+ len += offset; -+ } -+ -+ if (state < 4) -+ { -+ unsigned posSlot; -+ prob = probs + PosSlot + -+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << -+ kNumPosSlotBits); -+ TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot); -+ if (posSlot >= kStartPosModelIndex) -+ { -+ int numDirectBits = ((posSlot >> 1) - 1); -+ -+ /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */ -+ -+ if (posSlot < kEndPosModelIndex) -+ { -+ prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1; -+ } -+ else -+ { -+ numDirectBits -= kNumAlignBits; -+ do -+ { -+ NORMALIZE_CHECK -+ range >>= 1; -+ code -= range & (((code - range) >> 31) - 1); -+ /* if (code >= range) code -= range; */ -+ } -+ while (--numDirectBits != 0); -+ prob = probs + Align; -+ numDirectBits = kNumAlignBits; -+ } -+ { -+ unsigned i = 1; -+ do -+ { -+ GET_BIT_CHECK(prob + i, i); -+ } -+ while (--numDirectBits != 0); -+ } -+ } -+ } -+ } -+ } -+ NORMALIZE_CHECK; -+ return res; -+} -+ -+ -+static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data) -+{ -+ p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]); -+ p->range = 0xFFFFFFFF; -+ p->needFlush = 0; -+} -+ -+void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState) -+{ -+ p->needFlush = 1; -+ p->remainLen = 0; -+ p->tempBufSize = 0; -+ -+ if (initDic) -+ { -+ p->processedPos = 0; -+ p->checkDicSize = 0; -+ p->needInitState = 1; -+ } -+ if (initState) -+ p->needInitState = 1; -+} -+ -+void LzmaDec_Init(CLzmaDec *p) -+{ -+ p->dicPos = 0; -+ LzmaDec_InitDicAndState(p, True, True); -+} -+ -+static void LzmaDec_InitStateReal(CLzmaDec *p) -+{ -+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp)); -+ UInt32 i; -+ CLzmaProb *probs = p->probs; -+ for (i = 0; i < numProbs; i++) -+ probs[i] = kBitModelTotal >> 1; -+ p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1; -+ p->state = 0; -+ p->needInitState = 0; -+} -+ -+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen, -+ ELzmaFinishMode finishMode, ELzmaStatus *status) -+{ -+ SizeT inSize = *srcLen; -+ (*srcLen) = 0; -+ LzmaDec_WriteRem(p, dicLimit); -+ -+ *status = LZMA_STATUS_NOT_SPECIFIED; -+ -+ while (p->remainLen != kMatchSpecLenStart) -+ { -+ int checkEndMarkNow; -+ -+ if (p->needFlush != 0) -+ { -+ for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--) -+ p->tempBuf[p->tempBufSize++] = *src++; -+ if (p->tempBufSize < RC_INIT_SIZE) -+ { -+ *status = LZMA_STATUS_NEEDS_MORE_INPUT; -+ return SZ_OK; -+ } -+ if (p->tempBuf[0] != 0) -+ return SZ_ERROR_DATA; -+ -+ LzmaDec_InitRc(p, p->tempBuf); -+ p->tempBufSize = 0; -+ } -+ -+ checkEndMarkNow = 0; -+ if (p->dicPos >= dicLimit) -+ { -+ if (p->remainLen == 0 && p->code == 0) -+ { -+ *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK; -+ return SZ_OK; -+ } -+ if (finishMode == LZMA_FINISH_ANY) -+ { -+ *status = LZMA_STATUS_NOT_FINISHED; -+ return SZ_OK; -+ } -+ if (p->remainLen != 0) -+ { -+ *status = LZMA_STATUS_NOT_FINISHED; -+ return SZ_ERROR_DATA; -+ } -+ checkEndMarkNow = 1; -+ } -+ -+ if (p->needInitState) -+ LzmaDec_InitStateReal(p); -+ -+ if (p->tempBufSize == 0) -+ { -+ SizeT processed; -+ const Byte *bufLimit; -+ if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow) -+ { -+ int dummyRes = LzmaDec_TryDummy(p, src, inSize); -+ if (dummyRes == DUMMY_ERROR) -+ { -+ memcpy(p->tempBuf, src, inSize); -+ p->tempBufSize = (unsigned)inSize; -+ (*srcLen) += inSize; -+ *status = LZMA_STATUS_NEEDS_MORE_INPUT; -+ return SZ_OK; -+ } -+ if (checkEndMarkNow && dummyRes != DUMMY_MATCH) -+ { -+ *status = LZMA_STATUS_NOT_FINISHED; -+ return SZ_ERROR_DATA; -+ } -+ bufLimit = src; -+ } -+ else -+ bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX; -+ p->buf = src; -+ if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0) -+ return SZ_ERROR_DATA; -+ processed = (SizeT)(p->buf - src); -+ (*srcLen) += processed; -+ src += processed; -+ inSize -= processed; -+ } -+ else -+ { -+ unsigned rem = p->tempBufSize, lookAhead = 0; -+ while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize) -+ p->tempBuf[rem++] = src[lookAhead++]; -+ p->tempBufSize = rem; -+ if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow) -+ { -+ int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem); -+ if (dummyRes == DUMMY_ERROR) -+ { -+ (*srcLen) += lookAhead; -+ *status = LZMA_STATUS_NEEDS_MORE_INPUT; -+ return SZ_OK; -+ } -+ if (checkEndMarkNow && dummyRes != DUMMY_MATCH) -+ { -+ *status = LZMA_STATUS_NOT_FINISHED; -+ return SZ_ERROR_DATA; -+ } -+ } -+ p->buf = p->tempBuf; -+ if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0) -+ return SZ_ERROR_DATA; -+ lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf)); -+ (*srcLen) += lookAhead; -+ src += lookAhead; -+ inSize -= lookAhead; -+ p->tempBufSize = 0; -+ } -+ } -+ if (p->code == 0) -+ *status = LZMA_STATUS_FINISHED_WITH_MARK; -+ return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA; -+} -+ -+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status) -+{ -+ SizeT outSize = *destLen; -+ SizeT inSize = *srcLen; -+ *srcLen = *destLen = 0; -+ for (;;) -+ { -+ SizeT inSizeCur = inSize, outSizeCur, dicPos; -+ ELzmaFinishMode curFinishMode; -+ SRes res; -+ if (p->dicPos == p->dicBufSize) -+ p->dicPos = 0; -+ dicPos = p->dicPos; -+ if (outSize > p->dicBufSize - dicPos) -+ { -+ outSizeCur = p->dicBufSize; -+ curFinishMode = LZMA_FINISH_ANY; -+ } -+ else -+ { -+ outSizeCur = dicPos + outSize; -+ curFinishMode = finishMode; -+ } -+ -+ res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status); -+ src += inSizeCur; -+ inSize -= inSizeCur; -+ *srcLen += inSizeCur; -+ outSizeCur = p->dicPos - dicPos; -+ memcpy(dest, p->dic + dicPos, outSizeCur); -+ dest += outSizeCur; -+ outSize -= outSizeCur; -+ *destLen += outSizeCur; -+ if (res != 0) -+ return res; -+ if (outSizeCur == 0 || outSize == 0) -+ return SZ_OK; -+ } -+} -+ -+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc) -+{ -+ alloc->Free(alloc, p->probs); -+ p->probs = 0; -+} -+ -+static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc) -+{ -+ alloc->Free(alloc, p->dic); -+ p->dic = 0; -+} -+ -+void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc) -+{ -+ LzmaDec_FreeProbs(p, alloc); -+ LzmaDec_FreeDict(p, alloc); -+} -+ -+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size) -+{ -+ UInt32 dicSize; -+ Byte d; -+ -+ if (size < LZMA_PROPS_SIZE) -+ return SZ_ERROR_UNSUPPORTED; -+ else -+ dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24); -+ -+ if (dicSize < LZMA_DIC_MIN) -+ dicSize = LZMA_DIC_MIN; -+ p->dicSize = dicSize; -+ -+ d = data[0]; -+ if (d >= (9 * 5 * 5)) -+ return SZ_ERROR_UNSUPPORTED; -+ -+ p->lc = d % 9; -+ d /= 9; -+ p->pb = d / 5; -+ p->lp = d % 5; -+ -+ return SZ_OK; -+} -+ -+static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc) -+{ -+ UInt32 numProbs = LzmaProps_GetNumProbs(propNew); -+ if (p->probs == 0 || numProbs != p->numProbs) -+ { -+ LzmaDec_FreeProbs(p, alloc); -+ p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb)); -+ p->numProbs = numProbs; -+ if (p->probs == 0) -+ return SZ_ERROR_MEM; -+ } -+ return SZ_OK; -+} -+ -+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) -+{ -+ CLzmaProps propNew; -+ RINOK(LzmaProps_Decode(&propNew, props, propsSize)); -+ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc)); -+ p->prop = propNew; -+ return SZ_OK; -+} -+ -+SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) -+{ -+ CLzmaProps propNew; -+ SizeT dicBufSize; -+ RINOK(LzmaProps_Decode(&propNew, props, propsSize)); -+ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc)); -+ dicBufSize = propNew.dicSize; -+ if (p->dic == 0 || dicBufSize != p->dicBufSize) -+ { -+ LzmaDec_FreeDict(p, alloc); -+ p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize); -+ if (p->dic == 0) -+ { -+ LzmaDec_FreeProbs(p, alloc); -+ return SZ_ERROR_MEM; -+ } -+ } -+ p->dicBufSize = dicBufSize; -+ p->prop = propNew; -+ return SZ_OK; -+} -+ -+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, -+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, -+ ELzmaStatus *status, ISzAlloc *alloc) -+{ -+ CLzmaDec p; -+ SRes res; -+ SizeT inSize = *srcLen; -+ SizeT outSize = *destLen; -+ *srcLen = *destLen = 0; -+ if (inSize < RC_INIT_SIZE) -+ return SZ_ERROR_INPUT_EOF; -+ -+ LzmaDec_Construct(&p); -+ res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc); -+ if (res != 0) -+ return res; -+ p.dic = dest; -+ p.dicBufSize = outSize; -+ -+ LzmaDec_Init(&p); -+ -+ *srcLen = inSize; -+ res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status); -+ -+ if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT) -+ res = SZ_ERROR_INPUT_EOF; -+ -+ (*destLen) = p.dicPos; -+ LzmaDec_FreeProbs(&p, alloc); -+ return res; -+} ---- /dev/null -+++ b/lib/lzma/LzmaEnc.c -@@ -0,0 +1,2271 @@ -+/* LzmaEnc.c -- LZMA Encoder -+2009-11-24 : Igor Pavlov : Public domain */ -+ -+#include -+ -+/* #define SHOW_STAT */ -+/* #define SHOW_STAT2 */ -+ -+#if defined(SHOW_STAT) || defined(SHOW_STAT2) -+#include -+#endif -+ -+#include "LzmaEnc.h" -+ -+/* disable MT */ -+#define _7ZIP_ST -+ -+#include "LzFind.h" -+#ifndef _7ZIP_ST -+#include "LzFindMt.h" -+#endif -+ -+#ifdef SHOW_STAT -+static int ttt = 0; -+#endif -+ -+#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1) -+ -+#define kBlockSize (9 << 10) -+#define kUnpackBlockSize (1 << 18) -+#define kMatchArraySize (1 << 21) -+#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX) -+ -+#define kNumMaxDirectBits (31) -+ -+#define kNumTopBits 24 -+#define kTopValue ((UInt32)1 << kNumTopBits) -+ -+#define kNumBitModelTotalBits 11 -+#define kBitModelTotal (1 << kNumBitModelTotalBits) -+#define kNumMoveBits 5 -+#define kProbInitValue (kBitModelTotal >> 1) -+ -+#define kNumMoveReducingBits 4 -+#define kNumBitPriceShiftBits 4 -+#define kBitPrice (1 << kNumBitPriceShiftBits) -+ -+void LzmaEncProps_Init(CLzmaEncProps *p) -+{ -+ p->level = 5; -+ p->dictSize = p->mc = 0; -+ p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1; -+ p->writeEndMark = 0; -+} -+ -+void LzmaEncProps_Normalize(CLzmaEncProps *p) -+{ -+ int level = p->level; -+ if (level < 0) level = 5; -+ p->level = level; -+ if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26))); -+ if (p->lc < 0) p->lc = 3; -+ if (p->lp < 0) p->lp = 0; -+ if (p->pb < 0) p->pb = 2; -+ if (p->algo < 0) p->algo = (level < 5 ? 0 : 1); -+ if (p->fb < 0) p->fb = (level < 7 ? 32 : 64); -+ if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1); -+ if (p->numHashBytes < 0) p->numHashBytes = 4; -+ if (p->mc == 0) p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1); -+ if (p->numThreads < 0) -+ p->numThreads = -+ #ifndef _7ZIP_ST -+ ((p->btMode && p->algo) ? 2 : 1); -+ #else -+ 1; -+ #endif -+} -+ -+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2) -+{ -+ CLzmaEncProps props = *props2; -+ LzmaEncProps_Normalize(&props); -+ return props.dictSize; -+} -+ -+/* #define LZMA_LOG_BSR */ -+/* Define it for Intel's CPU */ -+ -+ -+#ifdef LZMA_LOG_BSR -+ -+#define kDicLogSizeMaxCompress 30 -+ -+#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); } -+ -+UInt32 GetPosSlot1(UInt32 pos) -+{ -+ UInt32 res; -+ BSR2_RET(pos, res); -+ return res; -+} -+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); } -+#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); } -+ -+#else -+ -+#define kNumLogBits (9 + (int)sizeof(size_t) / 2) -+#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7) -+ -+void LzmaEnc_FastPosInit(Byte *g_FastPos) -+{ -+ int c = 2, slotFast; -+ g_FastPos[0] = 0; -+ g_FastPos[1] = 1; -+ -+ for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++) -+ { -+ UInt32 k = (1 << ((slotFast >> 1) - 1)); -+ UInt32 j; -+ for (j = 0; j < k; j++, c++) -+ g_FastPos[c] = (Byte)slotFast; -+ } -+} -+ -+#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \ -+ (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \ -+ res = p->g_FastPos[pos >> i] + (i * 2); } -+/* -+#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \ -+ p->g_FastPos[pos >> 6] + 12 : \ -+ p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; } -+*/ -+ -+#define GetPosSlot1(pos) p->g_FastPos[pos] -+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); } -+#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); } -+ -+#endif -+ -+ -+#define LZMA_NUM_REPS 4 -+ -+typedef unsigned CState; -+ -+typedef struct -+{ -+ UInt32 price; -+ -+ CState state; -+ int prev1IsChar; -+ int prev2; -+ -+ UInt32 posPrev2; -+ UInt32 backPrev2; -+ -+ UInt32 posPrev; -+ UInt32 backPrev; -+ UInt32 backs[LZMA_NUM_REPS]; -+} COptimal; -+ -+#define kNumOpts (1 << 12) -+ -+#define kNumLenToPosStates 4 -+#define kNumPosSlotBits 6 -+#define kDicLogSizeMin 0 -+#define kDicLogSizeMax 32 -+#define kDistTableSizeMax (kDicLogSizeMax * 2) -+ -+ -+#define kNumAlignBits 4 -+#define kAlignTableSize (1 << kNumAlignBits) -+#define kAlignMask (kAlignTableSize - 1) -+ -+#define kStartPosModelIndex 4 -+#define kEndPosModelIndex 14 -+#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex) -+ -+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) -+ -+#ifdef _LZMA_PROB32 -+#define CLzmaProb UInt32 -+#else -+#define CLzmaProb UInt16 -+#endif -+ -+#define LZMA_PB_MAX 4 -+#define LZMA_LC_MAX 8 -+#define LZMA_LP_MAX 4 -+ -+#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX) -+ -+ -+#define kLenNumLowBits 3 -+#define kLenNumLowSymbols (1 << kLenNumLowBits) -+#define kLenNumMidBits 3 -+#define kLenNumMidSymbols (1 << kLenNumMidBits) -+#define kLenNumHighBits 8 -+#define kLenNumHighSymbols (1 << kLenNumHighBits) -+ -+#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols) -+ -+#define LZMA_MATCH_LEN_MIN 2 -+#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1) -+ -+#define kNumStates 12 -+ -+typedef struct -+{ -+ CLzmaProb choice; -+ CLzmaProb choice2; -+ CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits]; -+ CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits]; -+ CLzmaProb high[kLenNumHighSymbols]; -+} CLenEnc; -+ -+typedef struct -+{ -+ CLenEnc p; -+ UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal]; -+ UInt32 tableSize; -+ UInt32 counters[LZMA_NUM_PB_STATES_MAX]; -+} CLenPriceEnc; -+ -+typedef struct -+{ -+ UInt32 range; -+ Byte cache; -+ UInt64 low; -+ UInt64 cacheSize; -+ Byte *buf; -+ Byte *bufLim; -+ Byte *bufBase; -+ ISeqOutStream *outStream; -+ UInt64 processed; -+ SRes res; -+} CRangeEnc; -+ -+typedef struct -+{ -+ CLzmaProb *litProbs; -+ -+ CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX]; -+ CLzmaProb isRep[kNumStates]; -+ CLzmaProb isRepG0[kNumStates]; -+ CLzmaProb isRepG1[kNumStates]; -+ CLzmaProb isRepG2[kNumStates]; -+ CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX]; -+ -+ CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits]; -+ CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex]; -+ CLzmaProb posAlignEncoder[1 << kNumAlignBits]; -+ -+ CLenPriceEnc lenEnc; -+ CLenPriceEnc repLenEnc; -+ -+ UInt32 reps[LZMA_NUM_REPS]; -+ UInt32 state; -+} CSaveState; -+ -+typedef struct -+{ -+ IMatchFinder matchFinder; -+ void *matchFinderObj; -+ -+ #ifndef _7ZIP_ST -+ Bool mtMode; -+ CMatchFinderMt matchFinderMt; -+ #endif -+ -+ CMatchFinder matchFinderBase; -+ -+ #ifndef _7ZIP_ST -+ Byte pad[128]; -+ #endif -+ -+ UInt32 optimumEndIndex; -+ UInt32 optimumCurrentIndex; -+ -+ UInt32 longestMatchLength; -+ UInt32 numPairs; -+ UInt32 numAvail; -+ COptimal opt[kNumOpts]; -+ -+ #ifndef LZMA_LOG_BSR -+ Byte g_FastPos[1 << kNumLogBits]; -+ #endif -+ -+ UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits]; -+ UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1]; -+ UInt32 numFastBytes; -+ UInt32 additionalOffset; -+ UInt32 reps[LZMA_NUM_REPS]; -+ UInt32 state; -+ -+ UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax]; -+ UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances]; -+ UInt32 alignPrices[kAlignTableSize]; -+ UInt32 alignPriceCount; -+ -+ UInt32 distTableSize; -+ -+ unsigned lc, lp, pb; -+ unsigned lpMask, pbMask; -+ -+ CLzmaProb *litProbs; -+ -+ CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX]; -+ CLzmaProb isRep[kNumStates]; -+ CLzmaProb isRepG0[kNumStates]; -+ CLzmaProb isRepG1[kNumStates]; -+ CLzmaProb isRepG2[kNumStates]; -+ CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX]; -+ -+ CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits]; -+ CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex]; -+ CLzmaProb posAlignEncoder[1 << kNumAlignBits]; -+ -+ CLenPriceEnc lenEnc; -+ CLenPriceEnc repLenEnc; -+ -+ unsigned lclp; -+ -+ Bool fastMode; -+ -+ CRangeEnc rc; -+ -+ Bool writeEndMark; -+ UInt64 nowPos64; -+ UInt32 matchPriceCount; -+ Bool finished; -+ Bool multiThread; -+ -+ SRes result; -+ UInt32 dictSize; -+ UInt32 matchFinderCycles; -+ -+ int needInit; -+ -+ CSaveState saveState; -+} CLzmaEnc; -+ -+void LzmaEnc_SaveState(CLzmaEncHandle pp) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ CSaveState *dest = &p->saveState; -+ int i; -+ dest->lenEnc = p->lenEnc; -+ dest->repLenEnc = p->repLenEnc; -+ dest->state = p->state; -+ -+ for (i = 0; i < kNumStates; i++) -+ { -+ memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i])); -+ memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i])); -+ } -+ for (i = 0; i < kNumLenToPosStates; i++) -+ memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i])); -+ memcpy(dest->isRep, p->isRep, sizeof(p->isRep)); -+ memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0)); -+ memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1)); -+ memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2)); -+ memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders)); -+ memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder)); -+ memcpy(dest->reps, p->reps, sizeof(p->reps)); -+ memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb)); -+} -+ -+void LzmaEnc_RestoreState(CLzmaEncHandle pp) -+{ -+ CLzmaEnc *dest = (CLzmaEnc *)pp; -+ const CSaveState *p = &dest->saveState; -+ int i; -+ dest->lenEnc = p->lenEnc; -+ dest->repLenEnc = p->repLenEnc; -+ dest->state = p->state; -+ -+ for (i = 0; i < kNumStates; i++) -+ { -+ memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i])); -+ memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i])); -+ } -+ for (i = 0; i < kNumLenToPosStates; i++) -+ memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i])); -+ memcpy(dest->isRep, p->isRep, sizeof(p->isRep)); -+ memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0)); -+ memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1)); -+ memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2)); -+ memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders)); -+ memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder)); -+ memcpy(dest->reps, p->reps, sizeof(p->reps)); -+ memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb)); -+} -+ -+SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ CLzmaEncProps props = *props2; -+ LzmaEncProps_Normalize(&props); -+ -+ if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX || -+ props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30)) -+ return SZ_ERROR_PARAM; -+ p->dictSize = props.dictSize; -+ p->matchFinderCycles = props.mc; -+ { -+ unsigned fb = props.fb; -+ if (fb < 5) -+ fb = 5; -+ if (fb > LZMA_MATCH_LEN_MAX) -+ fb = LZMA_MATCH_LEN_MAX; -+ p->numFastBytes = fb; -+ } -+ p->lc = props.lc; -+ p->lp = props.lp; -+ p->pb = props.pb; -+ p->fastMode = (props.algo == 0); -+ p->matchFinderBase.btMode = props.btMode; -+ { -+ UInt32 numHashBytes = 4; -+ if (props.btMode) -+ { -+ if (props.numHashBytes < 2) -+ numHashBytes = 2; -+ else if (props.numHashBytes < 4) -+ numHashBytes = props.numHashBytes; -+ } -+ p->matchFinderBase.numHashBytes = numHashBytes; -+ } -+ -+ p->matchFinderBase.cutValue = props.mc; -+ -+ p->writeEndMark = props.writeEndMark; -+ -+ #ifndef _7ZIP_ST -+ /* -+ if (newMultiThread != _multiThread) -+ { -+ ReleaseMatchFinder(); -+ _multiThread = newMultiThread; -+ } -+ */ -+ p->multiThread = (props.numThreads > 1); -+ #endif -+ -+ return SZ_OK; -+} -+ -+static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 4, 5}; -+static const int kMatchNextStates[kNumStates] = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10}; -+static const int kRepNextStates[kNumStates] = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11}; -+static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11}; -+ -+#define IsCharState(s) ((s) < 7) -+ -+#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1) -+ -+#define kInfinityPrice (1 << 30) -+ -+static void RangeEnc_Construct(CRangeEnc *p) -+{ -+ p->outStream = 0; -+ p->bufBase = 0; -+} -+ -+#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize) -+ -+#define RC_BUF_SIZE (1 << 16) -+static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc) -+{ -+ if (p->bufBase == 0) -+ { -+ p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE); -+ if (p->bufBase == 0) -+ return 0; -+ p->bufLim = p->bufBase + RC_BUF_SIZE; -+ } -+ return 1; -+} -+ -+static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc) -+{ -+ alloc->Free(alloc, p->bufBase); -+ p->bufBase = 0; -+} -+ -+static void RangeEnc_Init(CRangeEnc *p) -+{ -+ /* Stream.Init(); */ -+ p->low = 0; -+ p->range = 0xFFFFFFFF; -+ p->cacheSize = 1; -+ p->cache = 0; -+ -+ p->buf = p->bufBase; -+ -+ p->processed = 0; -+ p->res = SZ_OK; -+} -+ -+static void RangeEnc_FlushStream(CRangeEnc *p) -+{ -+ size_t num; -+ if (p->res != SZ_OK) -+ return; -+ num = p->buf - p->bufBase; -+ if (num != p->outStream->Write(p->outStream, p->bufBase, num)) -+ p->res = SZ_ERROR_WRITE; -+ p->processed += num; -+ p->buf = p->bufBase; -+} -+ -+static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p) -+{ -+ if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0) -+ { -+ Byte temp = p->cache; -+ do -+ { -+ Byte *buf = p->buf; -+ *buf++ = (Byte)(temp + (Byte)(p->low >> 32)); -+ p->buf = buf; -+ if (buf == p->bufLim) -+ RangeEnc_FlushStream(p); -+ temp = 0xFF; -+ } -+ while (--p->cacheSize != 0); -+ p->cache = (Byte)((UInt32)p->low >> 24); -+ } -+ p->cacheSize++; -+ p->low = (UInt32)p->low << 8; -+} -+ -+static void RangeEnc_FlushData(CRangeEnc *p) -+{ -+ int i; -+ for (i = 0; i < 5; i++) -+ RangeEnc_ShiftLow(p); -+} -+ -+static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits) -+{ -+ do -+ { -+ p->range >>= 1; -+ p->low += p->range & (0 - ((value >> --numBits) & 1)); -+ if (p->range < kTopValue) -+ { -+ p->range <<= 8; -+ RangeEnc_ShiftLow(p); -+ } -+ } -+ while (numBits != 0); -+} -+ -+static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol) -+{ -+ UInt32 ttt = *prob; -+ UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt; -+ if (symbol == 0) -+ { -+ p->range = newBound; -+ ttt += (kBitModelTotal - ttt) >> kNumMoveBits; -+ } -+ else -+ { -+ p->low += newBound; -+ p->range -= newBound; -+ ttt -= ttt >> kNumMoveBits; -+ } -+ *prob = (CLzmaProb)ttt; -+ if (p->range < kTopValue) -+ { -+ p->range <<= 8; -+ RangeEnc_ShiftLow(p); -+ } -+} -+ -+static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol) -+{ -+ symbol |= 0x100; -+ do -+ { -+ RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1); -+ symbol <<= 1; -+ } -+ while (symbol < 0x10000); -+} -+ -+static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte) -+{ -+ UInt32 offs = 0x100; -+ symbol |= 0x100; -+ do -+ { -+ matchByte <<= 1; -+ RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1); -+ symbol <<= 1; -+ offs &= ~(matchByte ^ symbol); -+ } -+ while (symbol < 0x10000); -+} -+ -+void LzmaEnc_InitPriceTables(UInt32 *ProbPrices) -+{ -+ UInt32 i; -+ for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits)) -+ { -+ const int kCyclesBits = kNumBitPriceShiftBits; -+ UInt32 w = i; -+ UInt32 bitCount = 0; -+ int j; -+ for (j = 0; j < kCyclesBits; j++) -+ { -+ w = w * w; -+ bitCount <<= 1; -+ while (w >= ((UInt32)1 << 16)) -+ { -+ w >>= 1; -+ bitCount++; -+ } -+ } -+ ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount); -+ } -+} -+ -+ -+#define GET_PRICE(prob, symbol) \ -+ p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits]; -+ -+#define GET_PRICEa(prob, symbol) \ -+ ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits]; -+ -+#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits] -+#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits] -+ -+#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits] -+#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits] -+ -+static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices) -+{ -+ UInt32 price = 0; -+ symbol |= 0x100; -+ do -+ { -+ price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1); -+ symbol <<= 1; -+ } -+ while (symbol < 0x10000); -+ return price; -+} -+ -+static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices) -+{ -+ UInt32 price = 0; -+ UInt32 offs = 0x100; -+ symbol |= 0x100; -+ do -+ { -+ matchByte <<= 1; -+ price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1); -+ symbol <<= 1; -+ offs &= ~(matchByte ^ symbol); -+ } -+ while (symbol < 0x10000); -+ return price; -+} -+ -+ -+static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol) -+{ -+ UInt32 m = 1; -+ int i; -+ for (i = numBitLevels; i != 0;) -+ { -+ UInt32 bit; -+ i--; -+ bit = (symbol >> i) & 1; -+ RangeEnc_EncodeBit(rc, probs + m, bit); -+ m = (m << 1) | bit; -+ } -+} -+ -+static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol) -+{ -+ UInt32 m = 1; -+ int i; -+ for (i = 0; i < numBitLevels; i++) -+ { -+ UInt32 bit = symbol & 1; -+ RangeEnc_EncodeBit(rc, probs + m, bit); -+ m = (m << 1) | bit; -+ symbol >>= 1; -+ } -+} -+ -+static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices) -+{ -+ UInt32 price = 0; -+ symbol |= (1 << numBitLevels); -+ while (symbol != 1) -+ { -+ price += GET_PRICEa(probs[symbol >> 1], symbol & 1); -+ symbol >>= 1; -+ } -+ return price; -+} -+ -+static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices) -+{ -+ UInt32 price = 0; -+ UInt32 m = 1; -+ int i; -+ for (i = numBitLevels; i != 0; i--) -+ { -+ UInt32 bit = symbol & 1; -+ symbol >>= 1; -+ price += GET_PRICEa(probs[m], bit); -+ m = (m << 1) | bit; -+ } -+ return price; -+} -+ -+ -+static void LenEnc_Init(CLenEnc *p) -+{ -+ unsigned i; -+ p->choice = p->choice2 = kProbInitValue; -+ for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++) -+ p->low[i] = kProbInitValue; -+ for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++) -+ p->mid[i] = kProbInitValue; -+ for (i = 0; i < kLenNumHighSymbols; i++) -+ p->high[i] = kProbInitValue; -+} -+ -+static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState) -+{ -+ if (symbol < kLenNumLowSymbols) -+ { -+ RangeEnc_EncodeBit(rc, &p->choice, 0); -+ RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol); -+ } -+ else -+ { -+ RangeEnc_EncodeBit(rc, &p->choice, 1); -+ if (symbol < kLenNumLowSymbols + kLenNumMidSymbols) -+ { -+ RangeEnc_EncodeBit(rc, &p->choice2, 0); -+ RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols); -+ } -+ else -+ { -+ RangeEnc_EncodeBit(rc, &p->choice2, 1); -+ RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols); -+ } -+ } -+} -+ -+static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices) -+{ -+ UInt32 a0 = GET_PRICE_0a(p->choice); -+ UInt32 a1 = GET_PRICE_1a(p->choice); -+ UInt32 b0 = a1 + GET_PRICE_0a(p->choice2); -+ UInt32 b1 = a1 + GET_PRICE_1a(p->choice2); -+ UInt32 i = 0; -+ for (i = 0; i < kLenNumLowSymbols; i++) -+ { -+ if (i >= numSymbols) -+ return; -+ prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices); -+ } -+ for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++) -+ { -+ if (i >= numSymbols) -+ return; -+ prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices); -+ } -+ for (; i < numSymbols; i++) -+ prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices); -+} -+ -+static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices) -+{ -+ LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices); -+ p->counters[posState] = p->tableSize; -+} -+ -+static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices) -+{ -+ UInt32 posState; -+ for (posState = 0; posState < numPosStates; posState++) -+ LenPriceEnc_UpdateTable(p, posState, ProbPrices); -+} -+ -+static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices) -+{ -+ LenEnc_Encode(&p->p, rc, symbol, posState); -+ if (updatePrice) -+ if (--p->counters[posState] == 0) -+ LenPriceEnc_UpdateTable(p, posState, ProbPrices); -+} -+ -+ -+ -+ -+static void MovePos(CLzmaEnc *p, UInt32 num) -+{ -+ #ifdef SHOW_STAT -+ ttt += num; -+ printf("\n MovePos %d", num); -+ #endif -+ if (num != 0) -+ { -+ p->additionalOffset += num; -+ p->matchFinder.Skip(p->matchFinderObj, num); -+ } -+} -+ -+static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes) -+{ -+ UInt32 lenRes = 0, numPairs; -+ p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj); -+ numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches); -+ #ifdef SHOW_STAT -+ printf("\n i = %d numPairs = %d ", ttt, numPairs / 2); -+ ttt++; -+ { -+ UInt32 i; -+ for (i = 0; i < numPairs; i += 2) -+ printf("%2d %6d | ", p->matches[i], p->matches[i + 1]); -+ } -+ #endif -+ if (numPairs > 0) -+ { -+ lenRes = p->matches[numPairs - 2]; -+ if (lenRes == p->numFastBytes) -+ { -+ const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; -+ UInt32 distance = p->matches[numPairs - 1] + 1; -+ UInt32 numAvail = p->numAvail; -+ if (numAvail > LZMA_MATCH_LEN_MAX) -+ numAvail = LZMA_MATCH_LEN_MAX; -+ { -+ const Byte *pby2 = pby - distance; -+ for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++); -+ } -+ } -+ } -+ p->additionalOffset++; -+ *numDistancePairsRes = numPairs; -+ return lenRes; -+} -+ -+ -+#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False; -+#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False; -+#define IsShortRep(p) ((p)->backPrev == 0) -+ -+static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState) -+{ -+ return -+ GET_PRICE_0(p->isRepG0[state]) + -+ GET_PRICE_0(p->isRep0Long[state][posState]); -+} -+ -+static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState) -+{ -+ UInt32 price; -+ if (repIndex == 0) -+ { -+ price = GET_PRICE_0(p->isRepG0[state]); -+ price += GET_PRICE_1(p->isRep0Long[state][posState]); -+ } -+ else -+ { -+ price = GET_PRICE_1(p->isRepG0[state]); -+ if (repIndex == 1) -+ price += GET_PRICE_0(p->isRepG1[state]); -+ else -+ { -+ price += GET_PRICE_1(p->isRepG1[state]); -+ price += GET_PRICE(p->isRepG2[state], repIndex - 2); -+ } -+ } -+ return price; -+} -+ -+static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState) -+{ -+ return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] + -+ GetPureRepPrice(p, repIndex, state, posState); -+} -+ -+static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur) -+{ -+ UInt32 posMem = p->opt[cur].posPrev; -+ UInt32 backMem = p->opt[cur].backPrev; -+ p->optimumEndIndex = cur; -+ do -+ { -+ if (p->opt[cur].prev1IsChar) -+ { -+ MakeAsChar(&p->opt[posMem]) -+ p->opt[posMem].posPrev = posMem - 1; -+ if (p->opt[cur].prev2) -+ { -+ p->opt[posMem - 1].prev1IsChar = False; -+ p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2; -+ p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2; -+ } -+ } -+ { -+ UInt32 posPrev = posMem; -+ UInt32 backCur = backMem; -+ -+ backMem = p->opt[posPrev].backPrev; -+ posMem = p->opt[posPrev].posPrev; -+ -+ p->opt[posPrev].backPrev = backCur; -+ p->opt[posPrev].posPrev = cur; -+ cur = posPrev; -+ } -+ } -+ while (cur != 0); -+ *backRes = p->opt[0].backPrev; -+ p->optimumCurrentIndex = p->opt[0].posPrev; -+ return p->optimumCurrentIndex; -+} -+ -+#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300) -+ -+static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes) -+{ -+ UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur; -+ UInt32 matchPrice, repMatchPrice, normalMatchPrice; -+ UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS]; -+ UInt32 *matches; -+ const Byte *data; -+ Byte curByte, matchByte; -+ if (p->optimumEndIndex != p->optimumCurrentIndex) -+ { -+ const COptimal *opt = &p->opt[p->optimumCurrentIndex]; -+ UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex; -+ *backRes = opt->backPrev; -+ p->optimumCurrentIndex = opt->posPrev; -+ return lenRes; -+ } -+ p->optimumCurrentIndex = p->optimumEndIndex = 0; -+ -+ if (p->additionalOffset == 0) -+ mainLen = ReadMatchDistances(p, &numPairs); -+ else -+ { -+ mainLen = p->longestMatchLength; -+ numPairs = p->numPairs; -+ } -+ -+ numAvail = p->numAvail; -+ if (numAvail < 2) -+ { -+ *backRes = (UInt32)(-1); -+ return 1; -+ } -+ if (numAvail > LZMA_MATCH_LEN_MAX) -+ numAvail = LZMA_MATCH_LEN_MAX; -+ -+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; -+ repMaxIndex = 0; -+ for (i = 0; i < LZMA_NUM_REPS; i++) -+ { -+ UInt32 lenTest; -+ const Byte *data2; -+ reps[i] = p->reps[i]; -+ data2 = data - (reps[i] + 1); -+ if (data[0] != data2[0] || data[1] != data2[1]) -+ { -+ repLens[i] = 0; -+ continue; -+ } -+ for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++); -+ repLens[i] = lenTest; -+ if (lenTest > repLens[repMaxIndex]) -+ repMaxIndex = i; -+ } -+ if (repLens[repMaxIndex] >= p->numFastBytes) -+ { -+ UInt32 lenRes; -+ *backRes = repMaxIndex; -+ lenRes = repLens[repMaxIndex]; -+ MovePos(p, lenRes - 1); -+ return lenRes; -+ } -+ -+ matches = p->matches; -+ if (mainLen >= p->numFastBytes) -+ { -+ *backRes = matches[numPairs - 1] + LZMA_NUM_REPS; -+ MovePos(p, mainLen - 1); -+ return mainLen; -+ } -+ curByte = *data; -+ matchByte = *(data - (reps[0] + 1)); -+ -+ if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2) -+ { -+ *backRes = (UInt32)-1; -+ return 1; -+ } -+ -+ p->opt[0].state = (CState)p->state; -+ -+ posState = (position & p->pbMask); -+ -+ { -+ const CLzmaProb *probs = LIT_PROBS(position, *(data - 1)); -+ p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) + -+ (!IsCharState(p->state) ? -+ LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) : -+ LitEnc_GetPrice(probs, curByte, p->ProbPrices)); -+ } -+ -+ MakeAsChar(&p->opt[1]); -+ -+ matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]); -+ repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]); -+ -+ if (matchByte == curByte) -+ { -+ UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState); -+ if (shortRepPrice < p->opt[1].price) -+ { -+ p->opt[1].price = shortRepPrice; -+ MakeAsShortRep(&p->opt[1]); -+ } -+ } -+ lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]); -+ -+ if (lenEnd < 2) -+ { -+ *backRes = p->opt[1].backPrev; -+ return 1; -+ } -+ -+ p->opt[1].posPrev = 0; -+ for (i = 0; i < LZMA_NUM_REPS; i++) -+ p->opt[0].backs[i] = reps[i]; -+ -+ len = lenEnd; -+ do -+ p->opt[len--].price = kInfinityPrice; -+ while (len >= 2); -+ -+ for (i = 0; i < LZMA_NUM_REPS; i++) -+ { -+ UInt32 repLen = repLens[i]; -+ UInt32 price; -+ if (repLen < 2) -+ continue; -+ price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState); -+ do -+ { -+ UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2]; -+ COptimal *opt = &p->opt[repLen]; -+ if (curAndLenPrice < opt->price) -+ { -+ opt->price = curAndLenPrice; -+ opt->posPrev = 0; -+ opt->backPrev = i; -+ opt->prev1IsChar = False; -+ } -+ } -+ while (--repLen >= 2); -+ } -+ -+ normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]); -+ -+ len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2); -+ if (len <= mainLen) -+ { -+ UInt32 offs = 0; -+ while (len > matches[offs]) -+ offs += 2; -+ for (; ; len++) -+ { -+ COptimal *opt; -+ UInt32 distance = matches[offs + 1]; -+ -+ UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN]; -+ UInt32 lenToPosState = GetLenToPosState(len); -+ if (distance < kNumFullDistances) -+ curAndLenPrice += p->distancesPrices[lenToPosState][distance]; -+ else -+ { -+ UInt32 slot; -+ GetPosSlot2(distance, slot); -+ curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot]; -+ } -+ opt = &p->opt[len]; -+ if (curAndLenPrice < opt->price) -+ { -+ opt->price = curAndLenPrice; -+ opt->posPrev = 0; -+ opt->backPrev = distance + LZMA_NUM_REPS; -+ opt->prev1IsChar = False; -+ } -+ if (len == matches[offs]) -+ { -+ offs += 2; -+ if (offs == numPairs) -+ break; -+ } -+ } -+ } -+ -+ cur = 0; -+ -+ #ifdef SHOW_STAT2 -+ if (position >= 0) -+ { -+ unsigned i; -+ printf("\n pos = %4X", position); -+ for (i = cur; i <= lenEnd; i++) -+ printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price); -+ } -+ #endif -+ -+ for (;;) -+ { -+ UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen; -+ UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice; -+ Bool nextIsChar; -+ Byte curByte, matchByte; -+ const Byte *data; -+ COptimal *curOpt; -+ COptimal *nextOpt; -+ -+ cur++; -+ if (cur == lenEnd) -+ return Backward(p, backRes, cur); -+ -+ newLen = ReadMatchDistances(p, &numPairs); -+ if (newLen >= p->numFastBytes) -+ { -+ p->numPairs = numPairs; -+ p->longestMatchLength = newLen; -+ return Backward(p, backRes, cur); -+ } -+ position++; -+ curOpt = &p->opt[cur]; -+ posPrev = curOpt->posPrev; -+ if (curOpt->prev1IsChar) -+ { -+ posPrev--; -+ if (curOpt->prev2) -+ { -+ state = p->opt[curOpt->posPrev2].state; -+ if (curOpt->backPrev2 < LZMA_NUM_REPS) -+ state = kRepNextStates[state]; -+ else -+ state = kMatchNextStates[state]; -+ } -+ else -+ state = p->opt[posPrev].state; -+ state = kLiteralNextStates[state]; -+ } -+ else -+ state = p->opt[posPrev].state; -+ if (posPrev == cur - 1) -+ { -+ if (IsShortRep(curOpt)) -+ state = kShortRepNextStates[state]; -+ else -+ state = kLiteralNextStates[state]; -+ } -+ else -+ { -+ UInt32 pos; -+ const COptimal *prevOpt; -+ if (curOpt->prev1IsChar && curOpt->prev2) -+ { -+ posPrev = curOpt->posPrev2; -+ pos = curOpt->backPrev2; -+ state = kRepNextStates[state]; -+ } -+ else -+ { -+ pos = curOpt->backPrev; -+ if (pos < LZMA_NUM_REPS) -+ state = kRepNextStates[state]; -+ else -+ state = kMatchNextStates[state]; -+ } -+ prevOpt = &p->opt[posPrev]; -+ if (pos < LZMA_NUM_REPS) -+ { -+ UInt32 i; -+ reps[0] = prevOpt->backs[pos]; -+ for (i = 1; i <= pos; i++) -+ reps[i] = prevOpt->backs[i - 1]; -+ for (; i < LZMA_NUM_REPS; i++) -+ reps[i] = prevOpt->backs[i]; -+ } -+ else -+ { -+ UInt32 i; -+ reps[0] = (pos - LZMA_NUM_REPS); -+ for (i = 1; i < LZMA_NUM_REPS; i++) -+ reps[i] = prevOpt->backs[i - 1]; -+ } -+ } -+ curOpt->state = (CState)state; -+ -+ curOpt->backs[0] = reps[0]; -+ curOpt->backs[1] = reps[1]; -+ curOpt->backs[2] = reps[2]; -+ curOpt->backs[3] = reps[3]; -+ -+ curPrice = curOpt->price; -+ nextIsChar = False; -+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; -+ curByte = *data; -+ matchByte = *(data - (reps[0] + 1)); -+ -+ posState = (position & p->pbMask); -+ -+ curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]); -+ { -+ const CLzmaProb *probs = LIT_PROBS(position, *(data - 1)); -+ curAnd1Price += -+ (!IsCharState(state) ? -+ LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) : -+ LitEnc_GetPrice(probs, curByte, p->ProbPrices)); -+ } -+ -+ nextOpt = &p->opt[cur + 1]; -+ -+ if (curAnd1Price < nextOpt->price) -+ { -+ nextOpt->price = curAnd1Price; -+ nextOpt->posPrev = cur; -+ MakeAsChar(nextOpt); -+ nextIsChar = True; -+ } -+ -+ matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]); -+ repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]); -+ -+ if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0)) -+ { -+ UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState); -+ if (shortRepPrice <= nextOpt->price) -+ { -+ nextOpt->price = shortRepPrice; -+ nextOpt->posPrev = cur; -+ MakeAsShortRep(nextOpt); -+ nextIsChar = True; -+ } -+ } -+ numAvailFull = p->numAvail; -+ { -+ UInt32 temp = kNumOpts - 1 - cur; -+ if (temp < numAvailFull) -+ numAvailFull = temp; -+ } -+ -+ if (numAvailFull < 2) -+ continue; -+ numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes); -+ -+ if (!nextIsChar && matchByte != curByte) /* speed optimization */ -+ { -+ /* try Literal + rep0 */ -+ UInt32 temp; -+ UInt32 lenTest2; -+ const Byte *data2 = data - (reps[0] + 1); -+ UInt32 limit = p->numFastBytes + 1; -+ if (limit > numAvailFull) -+ limit = numAvailFull; -+ -+ for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++); -+ lenTest2 = temp - 1; -+ if (lenTest2 >= 2) -+ { -+ UInt32 state2 = kLiteralNextStates[state]; -+ UInt32 posStateNext = (position + 1) & p->pbMask; -+ UInt32 nextRepMatchPrice = curAnd1Price + -+ GET_PRICE_1(p->isMatch[state2][posStateNext]) + -+ GET_PRICE_1(p->isRep[state2]); -+ /* for (; lenTest2 >= 2; lenTest2--) */ -+ { -+ UInt32 curAndLenPrice; -+ COptimal *opt; -+ UInt32 offset = cur + 1 + lenTest2; -+ while (lenEnd < offset) -+ p->opt[++lenEnd].price = kInfinityPrice; -+ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext); -+ opt = &p->opt[offset]; -+ if (curAndLenPrice < opt->price) -+ { -+ opt->price = curAndLenPrice; -+ opt->posPrev = cur + 1; -+ opt->backPrev = 0; -+ opt->prev1IsChar = True; -+ opt->prev2 = False; -+ } -+ } -+ } -+ } -+ -+ startLen = 2; /* speed optimization */ -+ { -+ UInt32 repIndex; -+ for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++) -+ { -+ UInt32 lenTest; -+ UInt32 lenTestTemp; -+ UInt32 price; -+ const Byte *data2 = data - (reps[repIndex] + 1); -+ if (data[0] != data2[0] || data[1] != data2[1]) -+ continue; -+ for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++); -+ while (lenEnd < cur + lenTest) -+ p->opt[++lenEnd].price = kInfinityPrice; -+ lenTestTemp = lenTest; -+ price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState); -+ do -+ { -+ UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2]; -+ COptimal *opt = &p->opt[cur + lenTest]; -+ if (curAndLenPrice < opt->price) -+ { -+ opt->price = curAndLenPrice; -+ opt->posPrev = cur; -+ opt->backPrev = repIndex; -+ opt->prev1IsChar = False; -+ } -+ } -+ while (--lenTest >= 2); -+ lenTest = lenTestTemp; -+ -+ if (repIndex == 0) -+ startLen = lenTest + 1; -+ -+ /* if (_maxMode) */ -+ { -+ UInt32 lenTest2 = lenTest + 1; -+ UInt32 limit = lenTest2 + p->numFastBytes; -+ UInt32 nextRepMatchPrice; -+ if (limit > numAvailFull) -+ limit = numAvailFull; -+ for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++); -+ lenTest2 -= lenTest + 1; -+ if (lenTest2 >= 2) -+ { -+ UInt32 state2 = kRepNextStates[state]; -+ UInt32 posStateNext = (position + lenTest) & p->pbMask; -+ UInt32 curAndLenCharPrice = -+ price + p->repLenEnc.prices[posState][lenTest - 2] + -+ GET_PRICE_0(p->isMatch[state2][posStateNext]) + -+ LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]), -+ data[lenTest], data2[lenTest], p->ProbPrices); -+ state2 = kLiteralNextStates[state2]; -+ posStateNext = (position + lenTest + 1) & p->pbMask; -+ nextRepMatchPrice = curAndLenCharPrice + -+ GET_PRICE_1(p->isMatch[state2][posStateNext]) + -+ GET_PRICE_1(p->isRep[state2]); -+ -+ /* for (; lenTest2 >= 2; lenTest2--) */ -+ { -+ UInt32 curAndLenPrice; -+ COptimal *opt; -+ UInt32 offset = cur + lenTest + 1 + lenTest2; -+ while (lenEnd < offset) -+ p->opt[++lenEnd].price = kInfinityPrice; -+ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext); -+ opt = &p->opt[offset]; -+ if (curAndLenPrice < opt->price) -+ { -+ opt->price = curAndLenPrice; -+ opt->posPrev = cur + lenTest + 1; -+ opt->backPrev = 0; -+ opt->prev1IsChar = True; -+ opt->prev2 = True; -+ opt->posPrev2 = cur; -+ opt->backPrev2 = repIndex; -+ } -+ } -+ } -+ } -+ } -+ } -+ /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */ -+ if (newLen > numAvail) -+ { -+ newLen = numAvail; -+ for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2); -+ matches[numPairs] = newLen; -+ numPairs += 2; -+ } -+ if (newLen >= startLen) -+ { -+ UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]); -+ UInt32 offs, curBack, posSlot; -+ UInt32 lenTest; -+ while (lenEnd < cur + newLen) -+ p->opt[++lenEnd].price = kInfinityPrice; -+ -+ offs = 0; -+ while (startLen > matches[offs]) -+ offs += 2; -+ curBack = matches[offs + 1]; -+ GetPosSlot2(curBack, posSlot); -+ for (lenTest = /*2*/ startLen; ; lenTest++) -+ { -+ UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN]; -+ UInt32 lenToPosState = GetLenToPosState(lenTest); -+ COptimal *opt; -+ if (curBack < kNumFullDistances) -+ curAndLenPrice += p->distancesPrices[lenToPosState][curBack]; -+ else -+ curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask]; -+ -+ opt = &p->opt[cur + lenTest]; -+ if (curAndLenPrice < opt->price) -+ { -+ opt->price = curAndLenPrice; -+ opt->posPrev = cur; -+ opt->backPrev = curBack + LZMA_NUM_REPS; -+ opt->prev1IsChar = False; -+ } -+ -+ if (/*_maxMode && */lenTest == matches[offs]) -+ { -+ /* Try Match + Literal + Rep0 */ -+ const Byte *data2 = data - (curBack + 1); -+ UInt32 lenTest2 = lenTest + 1; -+ UInt32 limit = lenTest2 + p->numFastBytes; -+ UInt32 nextRepMatchPrice; -+ if (limit > numAvailFull) -+ limit = numAvailFull; -+ for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++); -+ lenTest2 -= lenTest + 1; -+ if (lenTest2 >= 2) -+ { -+ UInt32 state2 = kMatchNextStates[state]; -+ UInt32 posStateNext = (position + lenTest) & p->pbMask; -+ UInt32 curAndLenCharPrice = curAndLenPrice + -+ GET_PRICE_0(p->isMatch[state2][posStateNext]) + -+ LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]), -+ data[lenTest], data2[lenTest], p->ProbPrices); -+ state2 = kLiteralNextStates[state2]; -+ posStateNext = (posStateNext + 1) & p->pbMask; -+ nextRepMatchPrice = curAndLenCharPrice + -+ GET_PRICE_1(p->isMatch[state2][posStateNext]) + -+ GET_PRICE_1(p->isRep[state2]); -+ -+ /* for (; lenTest2 >= 2; lenTest2--) */ -+ { -+ UInt32 offset = cur + lenTest + 1 + lenTest2; -+ UInt32 curAndLenPrice; -+ COptimal *opt; -+ while (lenEnd < offset) -+ p->opt[++lenEnd].price = kInfinityPrice; -+ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext); -+ opt = &p->opt[offset]; -+ if (curAndLenPrice < opt->price) -+ { -+ opt->price = curAndLenPrice; -+ opt->posPrev = cur + lenTest + 1; -+ opt->backPrev = 0; -+ opt->prev1IsChar = True; -+ opt->prev2 = True; -+ opt->posPrev2 = cur; -+ opt->backPrev2 = curBack + LZMA_NUM_REPS; -+ } -+ } -+ } -+ offs += 2; -+ if (offs == numPairs) -+ break; -+ curBack = matches[offs + 1]; -+ if (curBack >= kNumFullDistances) -+ GetPosSlot2(curBack, posSlot); -+ } -+ } -+ } -+ } -+} -+ -+#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist)) -+ -+static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes) -+{ -+ UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i; -+ const Byte *data; -+ const UInt32 *matches; -+ -+ if (p->additionalOffset == 0) -+ mainLen = ReadMatchDistances(p, &numPairs); -+ else -+ { -+ mainLen = p->longestMatchLength; -+ numPairs = p->numPairs; -+ } -+ -+ numAvail = p->numAvail; -+ *backRes = (UInt32)-1; -+ if (numAvail < 2) -+ return 1; -+ if (numAvail > LZMA_MATCH_LEN_MAX) -+ numAvail = LZMA_MATCH_LEN_MAX; -+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; -+ -+ repLen = repIndex = 0; -+ for (i = 0; i < LZMA_NUM_REPS; i++) -+ { -+ UInt32 len; -+ const Byte *data2 = data - (p->reps[i] + 1); -+ if (data[0] != data2[0] || data[1] != data2[1]) -+ continue; -+ for (len = 2; len < numAvail && data[len] == data2[len]; len++); -+ if (len >= p->numFastBytes) -+ { -+ *backRes = i; -+ MovePos(p, len - 1); -+ return len; -+ } -+ if (len > repLen) -+ { -+ repIndex = i; -+ repLen = len; -+ } -+ } -+ -+ matches = p->matches; -+ if (mainLen >= p->numFastBytes) -+ { -+ *backRes = matches[numPairs - 1] + LZMA_NUM_REPS; -+ MovePos(p, mainLen - 1); -+ return mainLen; -+ } -+ -+ mainDist = 0; /* for GCC */ -+ if (mainLen >= 2) -+ { -+ mainDist = matches[numPairs - 1]; -+ while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1) -+ { -+ if (!ChangePair(matches[numPairs - 3], mainDist)) -+ break; -+ numPairs -= 2; -+ mainLen = matches[numPairs - 2]; -+ mainDist = matches[numPairs - 1]; -+ } -+ if (mainLen == 2 && mainDist >= 0x80) -+ mainLen = 1; -+ } -+ -+ if (repLen >= 2 && ( -+ (repLen + 1 >= mainLen) || -+ (repLen + 2 >= mainLen && mainDist >= (1 << 9)) || -+ (repLen + 3 >= mainLen && mainDist >= (1 << 15)))) -+ { -+ *backRes = repIndex; -+ MovePos(p, repLen - 1); -+ return repLen; -+ } -+ -+ if (mainLen < 2 || numAvail <= 2) -+ return 1; -+ -+ p->longestMatchLength = ReadMatchDistances(p, &p->numPairs); -+ if (p->longestMatchLength >= 2) -+ { -+ UInt32 newDistance = matches[p->numPairs - 1]; -+ if ((p->longestMatchLength >= mainLen && newDistance < mainDist) || -+ (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) || -+ (p->longestMatchLength > mainLen + 1) || -+ (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist))) -+ return 1; -+ } -+ -+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; -+ for (i = 0; i < LZMA_NUM_REPS; i++) -+ { -+ UInt32 len, limit; -+ const Byte *data2 = data - (p->reps[i] + 1); -+ if (data[0] != data2[0] || data[1] != data2[1]) -+ continue; -+ limit = mainLen - 1; -+ for (len = 2; len < limit && data[len] == data2[len]; len++); -+ if (len >= limit) -+ return 1; -+ } -+ *backRes = mainDist + LZMA_NUM_REPS; -+ MovePos(p, mainLen - 2); -+ return mainLen; -+} -+ -+static void WriteEndMarker(CLzmaEnc *p, UInt32 posState) -+{ -+ UInt32 len; -+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1); -+ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0); -+ p->state = kMatchNextStates[p->state]; -+ len = LZMA_MATCH_LEN_MIN; -+ LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices); -+ RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1); -+ RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits); -+ RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask); -+} -+ -+static SRes CheckErrors(CLzmaEnc *p) -+{ -+ if (p->result != SZ_OK) -+ return p->result; -+ if (p->rc.res != SZ_OK) -+ p->result = SZ_ERROR_WRITE; -+ if (p->matchFinderBase.result != SZ_OK) -+ p->result = SZ_ERROR_READ; -+ if (p->result != SZ_OK) -+ p->finished = True; -+ return p->result; -+} -+ -+static SRes Flush(CLzmaEnc *p, UInt32 nowPos) -+{ -+ /* ReleaseMFStream(); */ -+ p->finished = True; -+ if (p->writeEndMark) -+ WriteEndMarker(p, nowPos & p->pbMask); -+ RangeEnc_FlushData(&p->rc); -+ RangeEnc_FlushStream(&p->rc); -+ return CheckErrors(p); -+} -+ -+static void FillAlignPrices(CLzmaEnc *p) -+{ -+ UInt32 i; -+ for (i = 0; i < kAlignTableSize; i++) -+ p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices); -+ p->alignPriceCount = 0; -+} -+ -+static void FillDistancesPrices(CLzmaEnc *p) -+{ -+ UInt32 tempPrices[kNumFullDistances]; -+ UInt32 i, lenToPosState; -+ for (i = kStartPosModelIndex; i < kNumFullDistances; i++) -+ { -+ UInt32 posSlot = GetPosSlot1(i); -+ UInt32 footerBits = ((posSlot >> 1) - 1); -+ UInt32 base = ((2 | (posSlot & 1)) << footerBits); -+ tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices); -+ } -+ -+ for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++) -+ { -+ UInt32 posSlot; -+ const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState]; -+ UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState]; -+ for (posSlot = 0; posSlot < p->distTableSize; posSlot++) -+ posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices); -+ for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++) -+ posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits); -+ -+ { -+ UInt32 *distancesPrices = p->distancesPrices[lenToPosState]; -+ UInt32 i; -+ for (i = 0; i < kStartPosModelIndex; i++) -+ distancesPrices[i] = posSlotPrices[i]; -+ for (; i < kNumFullDistances; i++) -+ distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i]; -+ } -+ } -+ p->matchPriceCount = 0; -+} -+ -+void LzmaEnc_Construct(CLzmaEnc *p) -+{ -+ RangeEnc_Construct(&p->rc); -+ MatchFinder_Construct(&p->matchFinderBase); -+ #ifndef _7ZIP_ST -+ MatchFinderMt_Construct(&p->matchFinderMt); -+ p->matchFinderMt.MatchFinder = &p->matchFinderBase; -+ #endif -+ -+ { -+ CLzmaEncProps props; -+ LzmaEncProps_Init(&props); -+ LzmaEnc_SetProps(p, &props); -+ } -+ -+ #ifndef LZMA_LOG_BSR -+ LzmaEnc_FastPosInit(p->g_FastPos); -+ #endif -+ -+ LzmaEnc_InitPriceTables(p->ProbPrices); -+ p->litProbs = 0; -+ p->saveState.litProbs = 0; -+} -+ -+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc) -+{ -+ void *p; -+ p = alloc->Alloc(alloc, sizeof(CLzmaEnc)); -+ if (p != 0) -+ LzmaEnc_Construct((CLzmaEnc *)p); -+ return p; -+} -+ -+void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc) -+{ -+ alloc->Free(alloc, p->litProbs); -+ alloc->Free(alloc, p->saveState.litProbs); -+ p->litProbs = 0; -+ p->saveState.litProbs = 0; -+} -+ -+void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ #ifndef _7ZIP_ST -+ MatchFinderMt_Destruct(&p->matchFinderMt, allocBig); -+ #endif -+ MatchFinder_Free(&p->matchFinderBase, allocBig); -+ LzmaEnc_FreeLits(p, alloc); -+ RangeEnc_Free(&p->rc, alloc); -+} -+ -+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig); -+ alloc->Free(alloc, p); -+} -+ -+static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize) -+{ -+ UInt32 nowPos32, startPos32; -+ if (p->needInit) -+ { -+ p->matchFinder.Init(p->matchFinderObj); -+ p->needInit = 0; -+ } -+ -+ if (p->finished) -+ return p->result; -+ RINOK(CheckErrors(p)); -+ -+ nowPos32 = (UInt32)p->nowPos64; -+ startPos32 = nowPos32; -+ -+ if (p->nowPos64 == 0) -+ { -+ UInt32 numPairs; -+ Byte curByte; -+ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0) -+ return Flush(p, nowPos32); -+ ReadMatchDistances(p, &numPairs); -+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0); -+ p->state = kLiteralNextStates[p->state]; -+ curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset); -+ LitEnc_Encode(&p->rc, p->litProbs, curByte); -+ p->additionalOffset--; -+ nowPos32++; -+ } -+ -+ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0) -+ for (;;) -+ { -+ UInt32 pos, len, posState; -+ -+ if (p->fastMode) -+ len = GetOptimumFast(p, &pos); -+ else -+ len = GetOptimum(p, nowPos32, &pos); -+ -+ #ifdef SHOW_STAT2 -+ printf("\n pos = %4X, len = %d pos = %d", nowPos32, len, pos); -+ #endif -+ -+ posState = nowPos32 & p->pbMask; -+ if (len == 1 && pos == (UInt32)-1) -+ { -+ Byte curByte; -+ CLzmaProb *probs; -+ const Byte *data; -+ -+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0); -+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset; -+ curByte = *data; -+ probs = LIT_PROBS(nowPos32, *(data - 1)); -+ if (IsCharState(p->state)) -+ LitEnc_Encode(&p->rc, probs, curByte); -+ else -+ LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1)); -+ p->state = kLiteralNextStates[p->state]; -+ } -+ else -+ { -+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1); -+ if (pos < LZMA_NUM_REPS) -+ { -+ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1); -+ if (pos == 0) -+ { -+ RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0); -+ RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1)); -+ } -+ else -+ { -+ UInt32 distance = p->reps[pos]; -+ RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1); -+ if (pos == 1) -+ RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0); -+ else -+ { -+ RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1); -+ RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2); -+ if (pos == 3) -+ p->reps[3] = p->reps[2]; -+ p->reps[2] = p->reps[1]; -+ } -+ p->reps[1] = p->reps[0]; -+ p->reps[0] = distance; -+ } -+ if (len == 1) -+ p->state = kShortRepNextStates[p->state]; -+ else -+ { -+ LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices); -+ p->state = kRepNextStates[p->state]; -+ } -+ } -+ else -+ { -+ UInt32 posSlot; -+ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0); -+ p->state = kMatchNextStates[p->state]; -+ LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices); -+ pos -= LZMA_NUM_REPS; -+ GetPosSlot(pos, posSlot); -+ RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot); -+ -+ if (posSlot >= kStartPosModelIndex) -+ { -+ UInt32 footerBits = ((posSlot >> 1) - 1); -+ UInt32 base = ((2 | (posSlot & 1)) << footerBits); -+ UInt32 posReduced = pos - base; -+ -+ if (posSlot < kEndPosModelIndex) -+ RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced); -+ else -+ { -+ RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits); -+ RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask); -+ p->alignPriceCount++; -+ } -+ } -+ p->reps[3] = p->reps[2]; -+ p->reps[2] = p->reps[1]; -+ p->reps[1] = p->reps[0]; -+ p->reps[0] = pos; -+ p->matchPriceCount++; -+ } -+ } -+ p->additionalOffset -= len; -+ nowPos32 += len; -+ if (p->additionalOffset == 0) -+ { -+ UInt32 processed; -+ if (!p->fastMode) -+ { -+ if (p->matchPriceCount >= (1 << 7)) -+ FillDistancesPrices(p); -+ if (p->alignPriceCount >= kAlignTableSize) -+ FillAlignPrices(p); -+ } -+ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0) -+ break; -+ processed = nowPos32 - startPos32; -+ if (useLimits) -+ { -+ if (processed + kNumOpts + 300 >= maxUnpackSize || -+ RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize) -+ break; -+ } -+ else if (processed >= (1 << 15)) -+ { -+ p->nowPos64 += nowPos32 - startPos32; -+ return CheckErrors(p); -+ } -+ } -+ } -+ p->nowPos64 += nowPos32 - startPos32; -+ return Flush(p, nowPos32); -+} -+ -+#define kBigHashDicLimit ((UInt32)1 << 24) -+ -+static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ UInt32 beforeSize = kNumOpts; -+ Bool btMode; -+ if (!RangeEnc_Alloc(&p->rc, alloc)) -+ return SZ_ERROR_MEM; -+ btMode = (p->matchFinderBase.btMode != 0); -+ #ifndef _7ZIP_ST -+ p->mtMode = (p->multiThread && !p->fastMode && btMode); -+ #endif -+ -+ { -+ unsigned lclp = p->lc + p->lp; -+ if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp) -+ { -+ LzmaEnc_FreeLits(p, alloc); -+ p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb)); -+ p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb)); -+ if (p->litProbs == 0 || p->saveState.litProbs == 0) -+ { -+ LzmaEnc_FreeLits(p, alloc); -+ return SZ_ERROR_MEM; -+ } -+ p->lclp = lclp; -+ } -+ } -+ -+ p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit); -+ -+ if (beforeSize + p->dictSize < keepWindowSize) -+ beforeSize = keepWindowSize - p->dictSize; -+ -+ #ifndef _7ZIP_ST -+ if (p->mtMode) -+ { -+ RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig)); -+ p->matchFinderObj = &p->matchFinderMt; -+ MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder); -+ } -+ else -+ #endif -+ { -+ if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig)) -+ return SZ_ERROR_MEM; -+ p->matchFinderObj = &p->matchFinderBase; -+ MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder); -+ } -+ return SZ_OK; -+} -+ -+void LzmaEnc_Init(CLzmaEnc *p) -+{ -+ UInt32 i; -+ p->state = 0; -+ for (i = 0 ; i < LZMA_NUM_REPS; i++) -+ p->reps[i] = 0; -+ -+ RangeEnc_Init(&p->rc); -+ -+ -+ for (i = 0; i < kNumStates; i++) -+ { -+ UInt32 j; -+ for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++) -+ { -+ p->isMatch[i][j] = kProbInitValue; -+ p->isRep0Long[i][j] = kProbInitValue; -+ } -+ p->isRep[i] = kProbInitValue; -+ p->isRepG0[i] = kProbInitValue; -+ p->isRepG1[i] = kProbInitValue; -+ p->isRepG2[i] = kProbInitValue; -+ } -+ -+ { -+ UInt32 num = 0x300 << (p->lp + p->lc); -+ for (i = 0; i < num; i++) -+ p->litProbs[i] = kProbInitValue; -+ } -+ -+ { -+ for (i = 0; i < kNumLenToPosStates; i++) -+ { -+ CLzmaProb *probs = p->posSlotEncoder[i]; -+ UInt32 j; -+ for (j = 0; j < (1 << kNumPosSlotBits); j++) -+ probs[j] = kProbInitValue; -+ } -+ } -+ { -+ for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++) -+ p->posEncoders[i] = kProbInitValue; -+ } -+ -+ LenEnc_Init(&p->lenEnc.p); -+ LenEnc_Init(&p->repLenEnc.p); -+ -+ for (i = 0; i < (1 << kNumAlignBits); i++) -+ p->posAlignEncoder[i] = kProbInitValue; -+ -+ p->optimumEndIndex = 0; -+ p->optimumCurrentIndex = 0; -+ p->additionalOffset = 0; -+ -+ p->pbMask = (1 << p->pb) - 1; -+ p->lpMask = (1 << p->lp) - 1; -+} -+ -+void LzmaEnc_InitPrices(CLzmaEnc *p) -+{ -+ if (!p->fastMode) -+ { -+ FillDistancesPrices(p); -+ FillAlignPrices(p); -+ } -+ -+ p->lenEnc.tableSize = -+ p->repLenEnc.tableSize = -+ p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN; -+ LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices); -+ LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices); -+} -+ -+static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ UInt32 i; -+ for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++) -+ if (p->dictSize <= ((UInt32)1 << i)) -+ break; -+ p->distTableSize = i * 2; -+ -+ p->finished = False; -+ p->result = SZ_OK; -+ RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig)); -+ LzmaEnc_Init(p); -+ LzmaEnc_InitPrices(p); -+ p->nowPos64 = 0; -+ return SZ_OK; -+} -+ -+static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, -+ ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ p->matchFinderBase.stream = inStream; -+ p->needInit = 1; -+ p->rc.outStream = outStream; -+ return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig); -+} -+ -+SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp, -+ ISeqInStream *inStream, UInt32 keepWindowSize, -+ ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ p->matchFinderBase.stream = inStream; -+ p->needInit = 1; -+ return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig); -+} -+ -+static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen) -+{ -+ p->matchFinderBase.directInput = 1; -+ p->matchFinderBase.bufferBase = (Byte *)src; -+ p->matchFinderBase.directInputRem = srcLen; -+} -+ -+SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen, -+ UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ LzmaEnc_SetInputBuf(p, src, srcLen); -+ p->needInit = 1; -+ -+ return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig); -+} -+ -+void LzmaEnc_Finish(CLzmaEncHandle pp) -+{ -+ #ifndef _7ZIP_ST -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ if (p->mtMode) -+ MatchFinderMt_ReleaseStream(&p->matchFinderMt); -+ #else -+ pp = pp; -+ #endif -+} -+ -+typedef struct -+{ -+ ISeqOutStream funcTable; -+ Byte *data; -+ SizeT rem; -+ Bool overflow; -+} CSeqOutStreamBuf; -+ -+static size_t MyWrite(void *pp, const void *data, size_t size) -+{ -+ CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp; -+ if (p->rem < size) -+ { -+ size = p->rem; -+ p->overflow = True; -+ } -+ memcpy(p->data, data, size); -+ p->rem -= size; -+ p->data += size; -+ return size; -+} -+ -+ -+UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp) -+{ -+ const CLzmaEnc *p = (CLzmaEnc *)pp; -+ return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj); -+} -+ -+const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp) -+{ -+ const CLzmaEnc *p = (CLzmaEnc *)pp; -+ return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset; -+} -+ -+SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit, -+ Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ UInt64 nowPos64; -+ SRes res; -+ CSeqOutStreamBuf outStream; -+ -+ outStream.funcTable.Write = MyWrite; -+ outStream.data = dest; -+ outStream.rem = *destLen; -+ outStream.overflow = False; -+ -+ p->writeEndMark = False; -+ p->finished = False; -+ p->result = SZ_OK; -+ -+ if (reInit) -+ LzmaEnc_Init(p); -+ LzmaEnc_InitPrices(p); -+ nowPos64 = p->nowPos64; -+ RangeEnc_Init(&p->rc); -+ p->rc.outStream = &outStream.funcTable; -+ -+ res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize); -+ -+ *unpackSize = (UInt32)(p->nowPos64 - nowPos64); -+ *destLen -= outStream.rem; -+ if (outStream.overflow) -+ return SZ_ERROR_OUTPUT_EOF; -+ -+ return res; -+} -+ -+static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress) -+{ -+ SRes res = SZ_OK; -+ -+ #ifndef _7ZIP_ST -+ Byte allocaDummy[0x300]; -+ int i = 0; -+ for (i = 0; i < 16; i++) -+ allocaDummy[i] = (Byte)i; -+ #endif -+ -+ for (;;) -+ { -+ res = LzmaEnc_CodeOneBlock(p, False, 0, 0); -+ if (res != SZ_OK || p->finished != 0) -+ break; -+ if (progress != 0) -+ { -+ res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc)); -+ if (res != SZ_OK) -+ { -+ res = SZ_ERROR_PROGRESS; -+ break; -+ } -+ } -+ } -+ LzmaEnc_Finish(p); -+ return res; -+} -+ -+SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress, -+ ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig)); -+ return LzmaEnc_Encode2((CLzmaEnc *)pp, progress); -+} -+ -+SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ int i; -+ UInt32 dictSize = p->dictSize; -+ if (*size < LZMA_PROPS_SIZE) -+ return SZ_ERROR_PARAM; -+ *size = LZMA_PROPS_SIZE; -+ props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc); -+ -+ for (i = 11; i <= 30; i++) -+ { -+ if (dictSize <= ((UInt32)2 << i)) -+ { -+ dictSize = (2 << i); -+ break; -+ } -+ if (dictSize <= ((UInt32)3 << i)) -+ { -+ dictSize = (3 << i); -+ break; -+ } -+ } -+ -+ for (i = 0; i < 4; i++) -+ props[1 + i] = (Byte)(dictSize >> (8 * i)); -+ return SZ_OK; -+} -+ -+SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, -+ int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ SRes res; -+ CLzmaEnc *p = (CLzmaEnc *)pp; -+ -+ CSeqOutStreamBuf outStream; -+ -+ LzmaEnc_SetInputBuf(p, src, srcLen); -+ -+ outStream.funcTable.Write = MyWrite; -+ outStream.data = dest; -+ outStream.rem = *destLen; -+ outStream.overflow = False; -+ -+ p->writeEndMark = writeEndMark; -+ -+ p->rc.outStream = &outStream.funcTable; -+ res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig); -+ if (res == SZ_OK) -+ res = LzmaEnc_Encode2(p, progress); -+ -+ *destLen -= outStream.rem; -+ if (outStream.overflow) -+ return SZ_ERROR_OUTPUT_EOF; -+ return res; -+} -+ -+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, -+ const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark, -+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig) -+{ -+ CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc); -+ SRes res; -+ if (p == 0) -+ return SZ_ERROR_MEM; -+ -+ res = LzmaEnc_SetProps(p, props); -+ if (res == SZ_OK) -+ { -+ res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize); -+ if (res == SZ_OK) -+ res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen, -+ writeEndMark, progress, alloc, allocBig); -+ } -+ -+ LzmaEnc_Destroy(p, alloc, allocBig); -+ return res; -+} ---- /dev/null -+++ b/lib/lzma/Makefile -@@ -0,0 +1,7 @@ -+lzma_compress-objs := LzFind.o LzmaEnc.o -+lzma_decompress-objs := LzmaDec.o -+ -+obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o -+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o -+ -+EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h diff --git a/target/linux/generic/patches-3.3/531-debloat_lzma.patch b/target/linux/generic/patches-3.3/531-debloat_lzma.patch deleted file mode 100644 index 1e41661ebb..0000000000 --- a/target/linux/generic/patches-3.3/531-debloat_lzma.patch +++ /dev/null @@ -1,485 +0,0 @@ ---- a/include/linux/lzma/LzmaDec.h -+++ b/include/linux/lzma/LzmaDec.h -@@ -31,14 +31,6 @@ typedef struct _CLzmaProps - UInt32 dicSize; - } CLzmaProps; - --/* LzmaProps_Decode - decodes properties --Returns: -- SZ_OK -- SZ_ERROR_UNSUPPORTED - Unsupported properties --*/ -- --SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size); -- - - /* ---------- LZMA Decoder state ---------- */ - -@@ -70,8 +62,6 @@ typedef struct - - #define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; } - --void LzmaDec_Init(CLzmaDec *p); -- - /* There are two types of LZMA streams: - 0) Stream with end mark. That end mark adds about 6 bytes to compressed size. - 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */ -@@ -108,97 +98,6 @@ typedef enum - - /* ELzmaStatus is used only as output value for function call */ - -- --/* ---------- Interfaces ---------- */ -- --/* There are 3 levels of interfaces: -- 1) Dictionary Interface -- 2) Buffer Interface -- 3) One Call Interface -- You can select any of these interfaces, but don't mix functions from different -- groups for same object. */ -- -- --/* There are two variants to allocate state for Dictionary Interface: -- 1) LzmaDec_Allocate / LzmaDec_Free -- 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs -- You can use variant 2, if you set dictionary buffer manually. -- For Buffer Interface you must always use variant 1. -- --LzmaDec_Allocate* can return: -- SZ_OK -- SZ_ERROR_MEM - Memory allocation error -- SZ_ERROR_UNSUPPORTED - Unsupported properties --*/ -- --SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc); --void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc); -- --SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc); --void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc); -- --/* ---------- Dictionary Interface ---------- */ -- --/* You can use it, if you want to eliminate the overhead for data copying from -- dictionary to some other external buffer. -- You must work with CLzmaDec variables directly in this interface. -- -- STEPS: -- LzmaDec_Constr() -- LzmaDec_Allocate() -- for (each new stream) -- { -- LzmaDec_Init() -- while (it needs more decompression) -- { -- LzmaDec_DecodeToDic() -- use data from CLzmaDec::dic and update CLzmaDec::dicPos -- } -- } -- LzmaDec_Free() --*/ -- --/* LzmaDec_DecodeToDic -- -- The decoding to internal dictionary buffer (CLzmaDec::dic). -- You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!! -- --finishMode: -- It has meaning only if the decoding reaches output limit (dicLimit). -- LZMA_FINISH_ANY - Decode just dicLimit bytes. -- LZMA_FINISH_END - Stream must be finished after dicLimit. -- --Returns: -- SZ_OK -- status: -- LZMA_STATUS_FINISHED_WITH_MARK -- LZMA_STATUS_NOT_FINISHED -- LZMA_STATUS_NEEDS_MORE_INPUT -- LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK -- SZ_ERROR_DATA - Data error --*/ -- --SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, -- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); -- -- --/* ---------- Buffer Interface ---------- */ -- --/* It's zlib-like interface. -- See LzmaDec_DecodeToDic description for information about STEPS and return results, -- but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need -- to work with CLzmaDec variables manually. -- --finishMode: -- It has meaning only if the decoding reaches output limit (*destLen). -- LZMA_FINISH_ANY - Decode just destLen bytes. -- LZMA_FINISH_END - Stream must be finished after (*destLen). --*/ -- --SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, -- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); -- -- - /* ---------- One Call Interface ---------- */ - - /* LzmaDecode ---- a/lib/lzma/LzmaDec.c -+++ b/lib/lzma/LzmaDec.c -@@ -682,7 +682,7 @@ static void LzmaDec_InitRc(CLzmaDec *p, - p->needFlush = 0; - } - --void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState) -+static void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState) - { - p->needFlush = 1; - p->remainLen = 0; -@@ -698,7 +698,7 @@ void LzmaDec_InitDicAndState(CLzmaDec *p - p->needInitState = 1; - } - --void LzmaDec_Init(CLzmaDec *p) -+static void LzmaDec_Init(CLzmaDec *p) - { - p->dicPos = 0; - LzmaDec_InitDicAndState(p, True, True); -@@ -716,7 +716,7 @@ static void LzmaDec_InitStateReal(CLzmaD - p->needInitState = 0; - } - --SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen, -+static SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen, - ELzmaFinishMode finishMode, ELzmaStatus *status) - { - SizeT inSize = *srcLen; -@@ -837,7 +837,7 @@ SRes LzmaDec_DecodeToDic(CLzmaDec *p, Si - return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA; - } - --SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status) -+static __maybe_unused SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status) - { - SizeT outSize = *destLen; - SizeT inSize = *srcLen; -@@ -877,7 +877,7 @@ SRes LzmaDec_DecodeToBuf(CLzmaDec *p, By - } - } - --void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc) -+static void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc) - { - alloc->Free(alloc, p->probs); - p->probs = 0; -@@ -889,13 +889,13 @@ static void LzmaDec_FreeDict(CLzmaDec *p - p->dic = 0; - } - --void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc) -+static void __maybe_unused LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc) - { - LzmaDec_FreeProbs(p, alloc); - LzmaDec_FreeDict(p, alloc); - } - --SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size) -+static SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size) - { - UInt32 dicSize; - Byte d; -@@ -935,7 +935,7 @@ static SRes LzmaDec_AllocateProbs2(CLzma - return SZ_OK; - } - --SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) -+static SRes __maybe_unused LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) - { - CLzmaProps propNew; - RINOK(LzmaProps_Decode(&propNew, props, propsSize)); -@@ -944,7 +944,7 @@ SRes LzmaDec_AllocateProbs(CLzmaDec *p, - return SZ_OK; - } - --SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) -+static SRes __maybe_unused LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) - { - CLzmaProps propNew; - SizeT dicBufSize; ---- a/include/linux/lzma/LzmaEnc.h -+++ b/include/linux/lzma/LzmaEnc.h -@@ -31,9 +31,6 @@ typedef struct _CLzmaEncProps - } CLzmaEncProps; - - void LzmaEncProps_Init(CLzmaEncProps *p); --void LzmaEncProps_Normalize(CLzmaEncProps *p); --UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2); -- - - /* ---------- CLzmaEncHandle Interface ---------- */ - -@@ -53,26 +50,9 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc * - void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig); - SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props); - SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size); --SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream, -- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); - SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, - int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); - --/* ---------- One Call Interface ---------- */ -- --/* LzmaEncode --Return code: -- SZ_OK - OK -- SZ_ERROR_MEM - Memory allocation error -- SZ_ERROR_PARAM - Incorrect paramater -- SZ_ERROR_OUTPUT_EOF - output buffer overflow -- SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version) --*/ -- --SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, -- const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark, -- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); -- - #ifdef __cplusplus - } - #endif ---- a/lib/lzma/LzmaEnc.c -+++ b/lib/lzma/LzmaEnc.c -@@ -53,7 +53,7 @@ void LzmaEncProps_Init(CLzmaEncProps *p) - p->writeEndMark = 0; - } - --void LzmaEncProps_Normalize(CLzmaEncProps *p) -+static void LzmaEncProps_Normalize(CLzmaEncProps *p) - { - int level = p->level; - if (level < 0) level = 5; -@@ -76,7 +76,7 @@ void LzmaEncProps_Normalize(CLzmaEncProp - #endif - } - --UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2) -+static UInt32 __maybe_unused LzmaEncProps_GetDictSize(const CLzmaEncProps *props2) - { - CLzmaEncProps props = *props2; - LzmaEncProps_Normalize(&props); -@@ -93,7 +93,7 @@ UInt32 LzmaEncProps_GetDictSize(const CL - - #define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); } - --UInt32 GetPosSlot1(UInt32 pos) -+static UInt32 GetPosSlot1(UInt32 pos) - { - UInt32 res; - BSR2_RET(pos, res); -@@ -107,7 +107,7 @@ UInt32 GetPosSlot1(UInt32 pos) - #define kNumLogBits (9 + (int)sizeof(size_t) / 2) - #define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7) - --void LzmaEnc_FastPosInit(Byte *g_FastPos) -+static void LzmaEnc_FastPosInit(Byte *g_FastPos) - { - int c = 2, slotFast; - g_FastPos[0] = 0; -@@ -339,7 +339,7 @@ typedef struct - CSaveState saveState; - } CLzmaEnc; - --void LzmaEnc_SaveState(CLzmaEncHandle pp) -+static void __maybe_unused LzmaEnc_SaveState(CLzmaEncHandle pp) - { - CLzmaEnc *p = (CLzmaEnc *)pp; - CSaveState *dest = &p->saveState; -@@ -365,7 +365,7 @@ void LzmaEnc_SaveState(CLzmaEncHandle pp - memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb)); - } - --void LzmaEnc_RestoreState(CLzmaEncHandle pp) -+static void __maybe_unused LzmaEnc_RestoreState(CLzmaEncHandle pp) - { - CLzmaEnc *dest = (CLzmaEnc *)pp; - const CSaveState *p = &dest->saveState; -@@ -600,7 +600,7 @@ static void LitEnc_EncodeMatched(CRangeE - while (symbol < 0x10000); - } - --void LzmaEnc_InitPriceTables(UInt32 *ProbPrices) -+static void LzmaEnc_InitPriceTables(UInt32 *ProbPrices) - { - UInt32 i; - for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits)) -@@ -1676,7 +1676,7 @@ static void FillDistancesPrices(CLzmaEnc - p->matchPriceCount = 0; - } - --void LzmaEnc_Construct(CLzmaEnc *p) -+static void LzmaEnc_Construct(CLzmaEnc *p) - { - RangeEnc_Construct(&p->rc); - MatchFinder_Construct(&p->matchFinderBase); -@@ -1709,7 +1709,7 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc * - return p; - } - --void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc) -+static void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc) - { - alloc->Free(alloc, p->litProbs); - alloc->Free(alloc, p->saveState.litProbs); -@@ -2074,7 +2074,7 @@ SRes LzmaEnc_MemPrepare(CLzmaEncHandle p - return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig); - } - --void LzmaEnc_Finish(CLzmaEncHandle pp) -+static void LzmaEnc_Finish(CLzmaEncHandle pp) - { - #ifndef _7ZIP_ST - CLzmaEnc *p = (CLzmaEnc *)pp; -@@ -2108,7 +2108,7 @@ static size_t MyWrite(void *pp, const vo - } - - --UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp) -+static UInt32 __maybe_unused LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp) - { - const CLzmaEnc *p = (CLzmaEnc *)pp; - return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj); -@@ -2120,7 +2120,7 @@ const Byte *LzmaEnc_GetCurBuf(CLzmaEncHa - return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset; - } - --SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit, -+static SRes __maybe_unused LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit, - Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize) - { - CLzmaEnc *p = (CLzmaEnc *)pp; -@@ -2248,7 +2248,7 @@ SRes LzmaEnc_MemEncode(CLzmaEncHandle pp - return res; - } - --SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, -+static __maybe_unused SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, - const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark, - ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig) - { ---- a/include/linux/lzma/LzFind.h -+++ b/include/linux/lzma/LzFind.h -@@ -55,11 +55,6 @@ typedef struct _CMatchFinder - - #define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos) - --int MatchFinder_NeedMove(CMatchFinder *p); --Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p); --void MatchFinder_MoveBlock(CMatchFinder *p); --void MatchFinder_ReadIfRequired(CMatchFinder *p); -- - void MatchFinder_Construct(CMatchFinder *p); - - /* Conditions: -@@ -70,12 +65,6 @@ int MatchFinder_Create(CMatchFinder *p, - UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter, - ISzAlloc *alloc); - void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc); --void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems); --void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue); -- --UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son, -- UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue, -- UInt32 *distances, UInt32 maxLen); - - /* - Conditions: -@@ -102,12 +91,6 @@ typedef struct _IMatchFinder - - void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable); - --void MatchFinder_Init(CMatchFinder *p); --UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances); --UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances); --void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num); --void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num); -- - #ifdef __cplusplus - } - #endif ---- a/lib/lzma/LzFind.c -+++ b/lib/lzma/LzFind.c -@@ -42,12 +42,12 @@ static int LzInWindow_Create(CMatchFinde - return (p->bufferBase != 0); - } - --Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; } --Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; } -+static Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; } -+static Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; } - --UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; } -+static UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; } - --void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue) -+static void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue) - { - p->posLimit -= subValue; - p->pos -= subValue; -@@ -268,7 +268,7 @@ static void MatchFinder_SetLimits(CMatch - p->posLimit = p->pos + limit; - } - --void MatchFinder_Init(CMatchFinder *p) -+static void MatchFinder_Init(CMatchFinder *p) - { - UInt32 i; - for (i = 0; i < p->hashSizeSum; i++) -@@ -287,7 +287,7 @@ static UInt32 MatchFinder_GetSubValue(CM - return (p->pos - p->historySize - 1) & kNormalizeMask; - } - --void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems) -+static void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems) - { - UInt32 i; - for (i = 0; i < numItems; i++) -@@ -350,7 +350,7 @@ static UInt32 * Hc_GetMatchesSpec(UInt32 - } - } - --UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, -+static UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, - UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue, - UInt32 *distances, UInt32 maxLen) - { -@@ -492,7 +492,7 @@ static UInt32 Bt2_MatchFinder_GetMatches - GET_MATCHES_FOOTER(offset, 1) - } - --UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) -+static __maybe_unused UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) - { - UInt32 offset; - GET_MATCHES_HEADER(3) -@@ -632,7 +632,7 @@ static UInt32 Hc4_MatchFinder_GetMatches - MOVE_POS_RET - } - --UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) -+static __maybe_unused UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) - { - UInt32 offset; - GET_MATCHES_HEADER(3) -@@ -657,7 +657,7 @@ static void Bt2_MatchFinder_Skip(CMatchF - while (--num != 0); - } - --void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num) -+static __maybe_unused void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num) - { - do - { -@@ -718,7 +718,7 @@ static void Hc4_MatchFinder_Skip(CMatchF - while (--num != 0); - } - --void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num) -+static __maybe_unused void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num) - { - do - { diff --git a/target/linux/generic/patches-3.3/532-jffs2_eofdetect.patch b/target/linux/generic/patches-3.3/532-jffs2_eofdetect.patch deleted file mode 100644 index 1fac6d1f19..0000000000 --- a/target/linux/generic/patches-3.3/532-jffs2_eofdetect.patch +++ /dev/null @@ -1,132 +0,0 @@ ---- a/fs/jffs2/build.c -+++ b/fs/jffs2/build.c -@@ -112,6 +112,17 @@ static int jffs2_build_filesystem(struct - dbg_fsbuild("scanned flash completely\n"); - jffs2_dbg_dump_block_lists_nolock(c); - -+ if (c->flags & (1 << 7)) { -+ printk("%s(): unlocking the mtd device... ", __func__); -+ if (c->mtd->unlock) -+ c->mtd->unlock(c->mtd, 0, c->mtd->size); -+ printk("done.\n"); -+ -+ printk("%s(): erasing all blocks after the end marker... ", __func__); -+ jffs2_erase_pending_blocks(c, -1); -+ printk("done.\n"); -+ } -+ - dbg_fsbuild("pass 1 starting\n"); - c->flags |= JFFS2_SB_FLAG_BUILDING; - /* Now scan the directory tree, increasing nlink according to every dirent found. */ ---- a/fs/jffs2/scan.c -+++ b/fs/jffs2/scan.c -@@ -72,7 +72,7 @@ static int file_dirty(struct jffs2_sb_in - return ret; - if ((ret = jffs2_scan_dirty_space(c, jeb, jeb->free_size))) - return ret; -- /* Turned wasted size into dirty, since we apparently -+ /* Turned wasted size into dirty, since we apparently - think it's recoverable now. */ - jeb->dirty_size += jeb->wasted_size; - c->dirty_size += jeb->wasted_size; -@@ -147,8 +147,11 @@ int jffs2_scan_medium(struct jffs2_sb_in - /* reset summary info for next eraseblock scan */ - jffs2_sum_reset_collected(s); - -- ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset), -- buf_size, s); -+ if (c->flags & (1 << 7)) -+ ret = BLK_STATE_ALLFF; -+ else -+ ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset), -+ buf_size, s); - - if (ret < 0) - goto out; -@@ -403,7 +406,7 @@ static int jffs2_scan_xref_node(struct j - if (!ref) - return -ENOMEM; - -- /* BEFORE jffs2_build_xattr_subsystem() called, -+ /* BEFORE jffs2_build_xattr_subsystem() called, - * and AFTER xattr_ref is marked as a dead xref, - * ref->xid is used to store 32bit xid, xd is not used - * ref->ino is used to store 32bit inode-number, ic is not used -@@ -476,7 +479,7 @@ static int jffs2_scan_eraseblock (struct - struct jffs2_sum_marker *sm; - void *sumptr = NULL; - uint32_t sumlen; -- -+ - if (!buf_size) { - /* XIP case. Just look, point at the summary if it's there */ - sm = (void *)buf + c->sector_size - sizeof(*sm); -@@ -492,9 +495,9 @@ static int jffs2_scan_eraseblock (struct - buf_len = sizeof(*sm); - - /* Read as much as we want into the _end_ of the preallocated buffer */ -- err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len, -+ err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len, - jeb->offset + c->sector_size - buf_len, -- buf_len); -+ buf_len); - if (err) - return err; - -@@ -513,9 +516,9 @@ static int jffs2_scan_eraseblock (struct - } - if (buf_len < sumlen) { - /* Need to read more so that the entire summary node is present */ -- err = jffs2_fill_scan_buf(c, sumptr, -+ err = jffs2_fill_scan_buf(c, sumptr, - jeb->offset + c->sector_size - sumlen, -- sumlen - buf_len); -+ sumlen - buf_len); - if (err) - return err; - } -@@ -528,7 +531,7 @@ static int jffs2_scan_eraseblock (struct - - if (buf_size && sumlen > buf_size) - kfree(sumptr); -- /* If it returns with a real error, bail. -+ /* If it returns with a real error, bail. - If it returns positive, that's a block classification - (i.e. BLK_STATE_xxx) so return that too. - If it returns zero, fall through to full scan. */ -@@ -549,6 +552,17 @@ static int jffs2_scan_eraseblock (struct - return err; - } - -+ if ((buf[0] == 0xde) && -+ (buf[1] == 0xad) && -+ (buf[2] == 0xc0) && -+ (buf[3] == 0xde)) { -+ /* end of filesystem. erase everything after this point */ -+ printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset); -+ c->flags |= (1 << 7); -+ -+ return BLK_STATE_ALLFF; -+ } -+ - /* We temporarily use 'ofs' as a pointer into the buffer/jeb */ - ofs = 0; - max_ofs = EMPTY_SCAN_SIZE(c->sector_size); -@@ -674,7 +688,7 @@ scan_more: - scan_end = buf_len; - goto more_empty; - } -- -+ - /* See how much more there is to read in this eraseblock... */ - buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs); - if (!buf_len) { -@@ -910,7 +924,7 @@ scan_more: - - D1(printk(KERN_DEBUG "Block at 0x%08x: free 0x%08x, dirty 0x%08x, unchecked 0x%08x, used 0x%08x, wasted 0x%08x\n", - jeb->offset,jeb->free_size, jeb->dirty_size, jeb->unchecked_size, jeb->used_size, jeb->wasted_size)); -- -+ - /* mark_node_obsolete can add to wasted !! */ - if (jeb->wasted_size) { - jeb->dirty_size += jeb->wasted_size; diff --git a/target/linux/generic/patches-3.3/540-crypto-xz-decompression-support.patch b/target/linux/generic/patches-3.3/540-crypto-xz-decompression-support.patch deleted file mode 100644 index 3b37007305..0000000000 --- a/target/linux/generic/patches-3.3/540-crypto-xz-decompression-support.patch +++ /dev/null @@ -1,146 +0,0 @@ ---- a/crypto/Kconfig -+++ b/crypto/Kconfig -@@ -924,6 +924,13 @@ config CRYPTO_LZO - help - This is the LZO algorithm. - -+config CRYPTO_XZ -+ tristate "XZ compression algorithm" -+ select CRYPTO_ALGAPI -+ select XZ_DEC -+ help -+ This is the XZ algorithm. Only decompression is supported for now. -+ - comment "Random Number Generation" - - config CRYPTO_ANSI_CPRNG ---- a/crypto/Makefile -+++ b/crypto/Makefile -@@ -82,6 +82,7 @@ obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += mich - obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o - obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o authencesn.o - obj-$(CONFIG_CRYPTO_LZO) += lzo.o -+obj-$(CONFIG_CRYPTO_XZ) += xz.o - obj-$(CONFIG_CRYPTO_RNG2) += rng.o - obj-$(CONFIG_CRYPTO_RNG2) += krng.o - obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_cprng.o ---- /dev/null -+++ b/crypto/xz.c -@@ -0,0 +1,117 @@ -+/* -+ * Cryptographic API. -+ * -+ * XZ decompression support. -+ * -+ * Copyright (c) 2012 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+struct xz_comp_ctx { -+ struct xz_dec *decomp_state; -+ struct xz_buf decomp_buf; -+}; -+ -+static int crypto_xz_decomp_init(struct xz_comp_ctx *ctx) -+{ -+ ctx->decomp_state = xz_dec_init(XZ_SINGLE, 0); -+ if (!ctx->decomp_state) -+ return -ENOMEM; -+ -+ return 0; -+} -+ -+static void crypto_xz_decomp_exit(struct xz_comp_ctx *ctx) -+{ -+ xz_dec_end(ctx->decomp_state); -+} -+ -+static int crypto_xz_init(struct crypto_tfm *tfm) -+{ -+ struct xz_comp_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ return crypto_xz_decomp_init(ctx); -+} -+ -+static void crypto_xz_exit(struct crypto_tfm *tfm) -+{ -+ struct xz_comp_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ crypto_xz_decomp_exit(ctx); -+} -+ -+static int crypto_xz_compress(struct crypto_tfm *tfm, const u8 *src, -+ unsigned int slen, u8 *dst, unsigned int *dlen) -+{ -+ return -EOPNOTSUPP; -+} -+ -+static int crypto_xz_decompress(struct crypto_tfm *tfm, const u8 *src, -+ unsigned int slen, u8 *dst, unsigned int *dlen) -+{ -+ struct xz_comp_ctx *dctx = crypto_tfm_ctx(tfm); -+ struct xz_buf *xz_buf = &dctx->decomp_buf; -+ int ret; -+ -+ memset(xz_buf, '\0', sizeof(struct xz_buf)); -+ -+ xz_buf->in = (u8 *) src; -+ xz_buf->in_pos = 0; -+ xz_buf->in_size = slen; -+ xz_buf->out = (u8 *) dst; -+ xz_buf->out_pos = 0; -+ xz_buf->out_size = *dlen; -+ -+ ret = xz_dec_run(dctx->decomp_state, xz_buf); -+ if (ret != XZ_STREAM_END) { -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ *dlen = xz_buf->out_pos; -+ ret = 0; -+ -+out: -+ return ret; -+} -+ -+static struct crypto_alg crypto_xz_alg = { -+ .cra_name = "xz", -+ .cra_flags = CRYPTO_ALG_TYPE_COMPRESS, -+ .cra_ctxsize = sizeof(struct xz_comp_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_list = LIST_HEAD_INIT(crypto_xz_alg.cra_list), -+ .cra_init = crypto_xz_init, -+ .cra_exit = crypto_xz_exit, -+ .cra_u = { .compress = { -+ .coa_compress = crypto_xz_compress, -+ .coa_decompress = crypto_xz_decompress } } -+}; -+ -+static int __init crypto_xz_mod_init(void) -+{ -+ return crypto_register_alg(&crypto_xz_alg); -+} -+ -+static void __exit crypto_xz_mod_exit(void) -+{ -+ crypto_unregister_alg(&crypto_xz_alg); -+} -+ -+module_init(crypto_xz_mod_init); -+module_exit(crypto_xz_mod_exit); -+ -+MODULE_LICENSE("GPL v2"); -+MODULE_DESCRIPTION("Crypto XZ decompression support"); -+MODULE_AUTHOR("Gabor Juhos "); diff --git a/target/linux/generic/patches-3.3/541-ubifs-xz-decompression-support.patch b/target/linux/generic/patches-3.3/541-ubifs-xz-decompression-support.patch deleted file mode 100644 index 3442d90db7..0000000000 --- a/target/linux/generic/patches-3.3/541-ubifs-xz-decompression-support.patch +++ /dev/null @@ -1,94 +0,0 @@ ---- a/fs/ubifs/Kconfig -+++ b/fs/ubifs/Kconfig -@@ -5,8 +5,10 @@ config UBIFS_FS - select CRYPTO if UBIFS_FS_ADVANCED_COMPR - select CRYPTO if UBIFS_FS_LZO - select CRYPTO if UBIFS_FS_ZLIB -+ select CRYPTO if UBIFS_FS_XZ - select CRYPTO_LZO if UBIFS_FS_LZO - select CRYPTO_DEFLATE if UBIFS_FS_ZLIB -+ select CRYPTO_XZ if UBIFS_FS_XZ - depends on MTD_UBI - help - UBIFS is a file system for flash devices which works on top of UBI. -@@ -42,6 +44,14 @@ config UBIFS_FS_ZLIB - help - Zlib compresses better than LZO but it is slower. Say 'Y' if unsure. - -+config UBIFS_FS_XZ -+ bool "XZ decompression support" if UBIFS_FS_ADVANCED_COMPR -+ depends on UBIFS_FS -+ default y -+ help -+ XZ compresses better the ZLIB but it is slower. -+ Say 'Y' if unsure. -+ - # Debugging-related stuff - config UBIFS_FS_DEBUG - bool "Enable debugging support" ---- a/fs/ubifs/compress.c -+++ b/fs/ubifs/compress.c -@@ -71,6 +71,24 @@ static struct ubifs_compressor zlib_comp - }; - #endif - -+#ifdef CONFIG_UBIFS_FS_XZ -+static DEFINE_MUTEX(xz_enc_mutex); -+static DEFINE_MUTEX(xz_dec_mutex); -+ -+static struct ubifs_compressor xz_compr = { -+ .compr_type = UBIFS_COMPR_XZ, -+ .comp_mutex = &xz_enc_mutex, -+ .decomp_mutex = &xz_dec_mutex, -+ .name = "xz", -+ .capi_name = "xz", -+}; -+#else -+static struct ubifs_compressor xz_compr = { -+ .compr_type = UBIFS_COMPR_XZ, -+ .name = "xz", -+}; -+#endif -+ - /* All UBIFS compressors */ - struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT]; - -@@ -233,9 +251,15 @@ int __init ubifs_compressors_init(void) - if (err) - goto out_lzo; - -+ err = compr_init(&xz_compr); -+ if (err) -+ goto out_zlib; -+ - ubifs_compressors[UBIFS_COMPR_NONE] = &none_compr; - return 0; - -+out_zlib: -+ compr_exit(&zlib_compr); - out_lzo: - compr_exit(&lzo_compr); - return err; -@@ -248,4 +272,5 @@ void ubifs_compressors_exit(void) - { - compr_exit(&lzo_compr); - compr_exit(&zlib_compr); -+ compr_exit(&xz_compr); - } ---- a/fs/ubifs/ubifs-media.h -+++ b/fs/ubifs/ubifs-media.h -@@ -332,12 +332,14 @@ enum { - * UBIFS_COMPR_NONE: no compression - * UBIFS_COMPR_LZO: LZO compression - * UBIFS_COMPR_ZLIB: ZLIB compression -+ * UBIFS_COMPR_XZ: XZ compression - * UBIFS_COMPR_TYPES_CNT: count of supported compression types - */ - enum { - UBIFS_COMPR_NONE, - UBIFS_COMPR_LZO, - UBIFS_COMPR_ZLIB, -+ UBIFS_COMPR_XZ, - UBIFS_COMPR_TYPES_CNT, - }; - diff --git a/target/linux/generic/patches-3.3/550-ubifs-symlink-xattr-support.patch b/target/linux/generic/patches-3.3/550-ubifs-symlink-xattr-support.patch deleted file mode 100644 index b0d818e8df..0000000000 --- a/target/linux/generic/patches-3.3/550-ubifs-symlink-xattr-support.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/fs/ubifs/file.c -+++ b/fs/ubifs/file.c -@@ -1575,6 +1575,12 @@ const struct inode_operations ubifs_syml - .follow_link = ubifs_follow_link, - .setattr = ubifs_setattr, - .getattr = ubifs_getattr, -+#ifdef CONFIG_UBIFS_FS_XATTR -+ .setxattr = ubifs_setxattr, -+ .getxattr = ubifs_getxattr, -+ .listxattr = ubifs_listxattr, -+ .removexattr = ubifs_removexattr, -+#endif - }; - - const struct file_operations ubifs_file_operations = { ---- a/fs/ubifs/journal.c -+++ b/fs/ubifs/journal.c -@@ -553,7 +553,8 @@ int ubifs_jnl_update(struct ubifs_info * - - dbg_jnl("ino %lu, dent '%.*s', data len %d in dir ino %lu", - inode->i_ino, nm->len, nm->name, ui->data_len, dir->i_ino); -- ubifs_assert(dir_ui->data_len == 0); -+ if (!xent) -+ ubifs_assert(dir_ui->data_len == 0); - ubifs_assert(mutex_is_locked(&dir_ui->ui_mutex)); - - dlen = UBIFS_DENT_NODE_SZ + nm->len + 1; -@@ -573,6 +574,13 @@ int ubifs_jnl_update(struct ubifs_info * - aligned_dlen = ALIGN(dlen, 8); - aligned_ilen = ALIGN(ilen, 8); - len = aligned_dlen + aligned_ilen + UBIFS_INO_NODE_SZ; -+ if (xent) { -+ /* -+ * Make sure to account for dir_ui->data_len in -+ * length calculation in case there is extended attribute. -+ */ -+ len += dir_ui->data_len; -+ } - dent = kmalloc(len, GFP_NOFS); - if (!dent) - return -ENOMEM; -@@ -649,7 +657,8 @@ int ubifs_jnl_update(struct ubifs_info * - - ino_key_init(c, &ino_key, dir->i_ino); - ino_offs += aligned_ilen; -- err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, UBIFS_INO_NODE_SZ); -+ err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, -+ UBIFS_INO_NODE_SZ + dir_ui->data_len); - if (err) - goto out_ro; - ---- a/fs/ubifs/xattr.c -+++ b/fs/ubifs/xattr.c -@@ -209,12 +209,12 @@ static int change_xattr(struct ubifs_inf - goto out_free; - } - inode->i_size = ui->ui_size = size; -- ui->data_len = size; - - mutex_lock(&host_ui->ui_mutex); - host->i_ctime = ubifs_current_time(host); - host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len); - host_ui->xattr_size += CALC_XATTR_BYTES(size); -+ ui->data_len = size; - - /* - * It is important to write the host inode after the xattr inode diff --git a/target/linux/generic/patches-3.3/600-netfilter_layer7_2.22.patch b/target/linux/generic/patches-3.3/600-netfilter_layer7_2.22.patch deleted file mode 100644 index f3055590ab..0000000000 --- a/target/linux/generic/patches-3.3/600-netfilter_layer7_2.22.patch +++ /dev/null @@ -1,2142 +0,0 @@ ---- a/net/netfilter/Kconfig -+++ b/net/netfilter/Kconfig -@@ -1053,6 +1053,27 @@ config NETFILTER_XT_MATCH_STATE - - To compile it as a module, choose M here. If unsure, say N. - -+config NETFILTER_XT_MATCH_LAYER7 -+ tristate '"layer7" match support' -+ depends on NETFILTER_XTABLES -+ depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK) -+ depends on NETFILTER_ADVANCED -+ help -+ Say Y if you want to be able to classify connections (and their -+ packets) based on regular expression matching of their application -+ layer data. This is one way to classify applications such as -+ peer-to-peer filesharing systems that do not always use the same -+ port. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ -+config NETFILTER_XT_MATCH_LAYER7_DEBUG -+ bool 'Layer 7 debugging output' -+ depends on NETFILTER_XT_MATCH_LAYER7 -+ help -+ Say Y to get lots of debugging output. -+ -+ - config NETFILTER_XT_MATCH_STATISTIC - tristate '"statistic" match support' - depends on NETFILTER_ADVANCED ---- a/net/netfilter/Makefile -+++ b/net/netfilter/Makefile -@@ -105,6 +105,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT) - obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o - obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o - obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o -+obj-$(CONFIG_NETFILTER_XT_MATCH_LAYER7) += xt_layer7.o - obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o - obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o - obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o ---- /dev/null -+++ b/net/netfilter/xt_layer7.c -@@ -0,0 +1,666 @@ -+/* -+ Kernel module to match application layer (OSI layer 7) data in connections. -+ -+ http://l7-filter.sf.net -+ -+ (C) 2003-2009 Matthew Strait and Ethan Sommer. -+ -+ This program is free software; you can redistribute it and/or -+ modify it under the terms of the GNU General Public License -+ as published by the Free Software Foundation; either version -+ 2 of the License, or (at your option) any later version. -+ http://www.gnu.org/licenses/gpl.txt -+ -+ Based on ipt_string.c (C) 2000 Emmanuel Roger , -+ xt_helper.c (C) 2002 Harald Welte and cls_layer7.c (C) 2003 Matthew Strait, -+ Ethan Sommer, Justin Levandoski. -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27) -+#include -+#include -+#endif -+#include -+#include -+#include -+#include -+ -+#include "regexp/regexp.c" -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Matthew Strait , Ethan Sommer "); -+MODULE_DESCRIPTION("iptables application layer match module"); -+MODULE_ALIAS("ipt_layer7"); -+MODULE_VERSION("2.21"); -+ -+static int maxdatalen = 2048; // this is the default -+module_param(maxdatalen, int, 0444); -+MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter"); -+#ifdef CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG -+ #define DPRINTK(format,args...) printk(format,##args) -+#else -+ #define DPRINTK(format,args...) -+#endif -+ -+/* Number of packets whose data we look at. -+This can be modified through /proc/net/layer7_numpackets */ -+static int num_packets = 10; -+ -+static struct pattern_cache { -+ char * regex_string; -+ regexp * pattern; -+ struct pattern_cache * next; -+} * first_pattern_cache = NULL; -+ -+DEFINE_SPINLOCK(l7_lock); -+ -+static int total_acct_packets(struct nf_conn *ct) -+{ -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 26) -+ BUG_ON(ct == NULL); -+ return (ct->counters[IP_CT_DIR_ORIGINAL].packets + ct->counters[IP_CT_DIR_REPLY].packets); -+#else -+ struct nf_conn_counter *acct; -+ -+ BUG_ON(ct == NULL); -+ acct = nf_conn_acct_find(ct); -+ if (!acct) -+ return 0; -+ return (atomic64_read(&acct[IP_CT_DIR_ORIGINAL].packets) + atomic64_read(&acct[IP_CT_DIR_REPLY].packets)); -+#endif -+} -+ -+#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG -+/* Converts an unfriendly string into a friendly one by -+replacing unprintables with periods and all whitespace with " ". */ -+static char * friendly_print(unsigned char * s) -+{ -+ char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC); -+ int i; -+ -+ if(!f) { -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in " -+ "friendly_print, bailing.\n"); -+ return NULL; -+ } -+ -+ for(i = 0; i < strlen(s); i++){ -+ if(isprint(s[i]) && s[i] < 128) f[i] = s[i]; -+ else if(isspace(s[i])) f[i] = ' '; -+ else f[i] = '.'; -+ } -+ f[i] = '\0'; -+ return f; -+} -+ -+static char dec2hex(int i) -+{ -+ switch (i) { -+ case 0 ... 9: -+ return (i + '0'); -+ break; -+ case 10 ... 15: -+ return (i - 10 + 'a'); -+ break; -+ default: -+ if (net_ratelimit()) -+ printk("layer7: Problem in dec2hex\n"); -+ return '\0'; -+ } -+} -+ -+static char * hex_print(unsigned char * s) -+{ -+ char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC); -+ int i; -+ -+ if(!g) { -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in hex_print, " -+ "bailing.\n"); -+ return NULL; -+ } -+ -+ for(i = 0; i < strlen(s); i++) { -+ g[i*3 ] = dec2hex(s[i]/16); -+ g[i*3 + 1] = dec2hex(s[i]%16); -+ g[i*3 + 2] = ' '; -+ } -+ g[i*3] = '\0'; -+ -+ return g; -+} -+#endif // DEBUG -+ -+/* Use instead of regcomp. As we expect to be seeing the same regexps over and -+over again, it make sense to cache the results. */ -+static regexp * compile_and_cache(const char * regex_string, -+ const char * protocol) -+{ -+ struct pattern_cache * node = first_pattern_cache; -+ struct pattern_cache * last_pattern_cache = first_pattern_cache; -+ struct pattern_cache * tmp; -+ unsigned int len; -+ -+ while (node != NULL) { -+ if (!strcmp(node->regex_string, regex_string)) -+ return node->pattern; -+ -+ last_pattern_cache = node;/* points at the last non-NULL node */ -+ node = node->next; -+ } -+ -+ /* If we reach the end of the list, then we have not yet cached -+ the pattern for this regex. Let's do that now. -+ Be paranoid about running out of memory to avoid list corruption. */ -+ tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC); -+ -+ if(!tmp) { -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in " -+ "compile_and_cache, bailing.\n"); -+ return NULL; -+ } -+ -+ tmp->regex_string = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC); -+ tmp->pattern = kmalloc(sizeof(struct regexp), GFP_ATOMIC); -+ tmp->next = NULL; -+ -+ if(!tmp->regex_string || !tmp->pattern) { -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in " -+ "compile_and_cache, bailing.\n"); -+ kfree(tmp->regex_string); -+ kfree(tmp->pattern); -+ kfree(tmp); -+ return NULL; -+ } -+ -+ /* Ok. The new node is all ready now. */ -+ node = tmp; -+ -+ if(first_pattern_cache == NULL) /* list is empty */ -+ first_pattern_cache = node; /* make node the beginning */ -+ else -+ last_pattern_cache->next = node; /* attach node to the end */ -+ -+ /* copy the string and compile the regex */ -+ len = strlen(regex_string); -+ DPRINTK("About to compile this: \"%s\"\n", regex_string); -+ node->pattern = regcomp((char *)regex_string, &len); -+ if ( !node->pattern ) { -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: Error compiling regexp " -+ "\"%s\" (%s)\n", -+ regex_string, protocol); -+ /* pattern is now cached as NULL, so we won't try again. */ -+ } -+ -+ strcpy(node->regex_string, regex_string); -+ return node->pattern; -+} -+ -+static int can_handle(const struct sk_buff *skb) -+{ -+ if(!ip_hdr(skb)) /* not IP */ -+ return 0; -+ if(ip_hdr(skb)->protocol != IPPROTO_TCP && -+ ip_hdr(skb)->protocol != IPPROTO_UDP && -+ ip_hdr(skb)->protocol != IPPROTO_ICMP) -+ return 0; -+ return 1; -+} -+ -+/* Returns offset the into the skb->data that the application data starts */ -+static int app_data_offset(const struct sk_buff *skb) -+{ -+ /* In case we are ported somewhere (ebtables?) where ip_hdr(skb) -+ isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */ -+ int ip_hl = 4*ip_hdr(skb)->ihl; -+ -+ if( ip_hdr(skb)->protocol == IPPROTO_TCP ) { -+ /* 12 == offset into TCP header for the header length field. -+ Can't get this with skb->h.th->doff because the tcphdr -+ struct doesn't get set when routing (this is confirmed to be -+ true in Netfilter as well as QoS.) */ -+ int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4); -+ -+ return ip_hl + tcp_hl; -+ } else if( ip_hdr(skb)->protocol == IPPROTO_UDP ) { -+ return ip_hl + 8; /* UDP header is always 8 bytes */ -+ } else if( ip_hdr(skb)->protocol == IPPROTO_ICMP ) { -+ return ip_hl + 8; /* ICMP header is 8 bytes */ -+ } else { -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: tried to handle unknown " -+ "protocol!\n"); -+ return ip_hl + 8; /* something reasonable */ -+ } -+} -+ -+/* handles whether there's a match when we aren't appending data anymore */ -+static int match_no_append(struct nf_conn * conntrack, -+ struct nf_conn * master_conntrack, -+ enum ip_conntrack_info ctinfo, -+ enum ip_conntrack_info master_ctinfo, -+ const struct xt_layer7_info * info) -+{ -+ /* If we're in here, throw the app data away */ -+ if(master_conntrack->layer7.app_data != NULL) { -+ -+ #ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG -+ if(!master_conntrack->layer7.app_proto) { -+ char * f = -+ friendly_print(master_conntrack->layer7.app_data); -+ char * g = -+ hex_print(master_conntrack->layer7.app_data); -+ DPRINTK("\nl7-filter gave up after %d bytes " -+ "(%d packets):\n%s\n", -+ strlen(f), total_acct_packets(master_conntrack), f); -+ kfree(f); -+ DPRINTK("In hex: %s\n", g); -+ kfree(g); -+ } -+ #endif -+ -+ kfree(master_conntrack->layer7.app_data); -+ master_conntrack->layer7.app_data = NULL; /* don't free again */ -+ } -+ -+ if(master_conntrack->layer7.app_proto){ -+ /* Here child connections set their .app_proto (for /proc) */ -+ if(!conntrack->layer7.app_proto) { -+ conntrack->layer7.app_proto = -+ kmalloc(strlen(master_conntrack->layer7.app_proto)+1, -+ GFP_ATOMIC); -+ if(!conntrack->layer7.app_proto){ -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory " -+ "in match_no_append, " -+ "bailing.\n"); -+ return 1; -+ } -+ strcpy(conntrack->layer7.app_proto, -+ master_conntrack->layer7.app_proto); -+ } -+ -+ return (!strcmp(master_conntrack->layer7.app_proto, -+ info->protocol)); -+ } -+ else { -+ /* If not classified, set to "unknown" to distinguish from -+ connections that are still being tested. */ -+ master_conntrack->layer7.app_proto = -+ kmalloc(strlen("unknown")+1, GFP_ATOMIC); -+ if(!master_conntrack->layer7.app_proto){ -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in " -+ "match_no_append, bailing.\n"); -+ return 1; -+ } -+ strcpy(master_conntrack->layer7.app_proto, "unknown"); -+ return 0; -+ } -+} -+ -+/* add the new app data to the conntrack. Return number of bytes added. */ -+static int add_data(struct nf_conn * master_conntrack, -+ char * app_data, int appdatalen) -+{ -+ int length = 0, i; -+ int oldlength = master_conntrack->layer7.app_data_len; -+ -+ /* This is a fix for a race condition by Deti Fliegl. However, I'm not -+ clear on whether the race condition exists or whether this really -+ fixes it. I might just be being dense... Anyway, if it's not really -+ a fix, all it does is waste a very small amount of time. */ -+ if(!master_conntrack->layer7.app_data) return 0; -+ -+ /* Strip nulls. Make everything lower case (our regex lib doesn't -+ do case insensitivity). Add it to the end of the current data. */ -+ for(i = 0; i < maxdatalen-oldlength-1 && -+ i < appdatalen; i++) { -+ if(app_data[i] != '\0') { -+ /* the kernel version of tolower mungs 'upper ascii' */ -+ master_conntrack->layer7.app_data[length+oldlength] = -+ isascii(app_data[i])? -+ tolower(app_data[i]) : app_data[i]; -+ length++; -+ } -+ } -+ -+ master_conntrack->layer7.app_data[length+oldlength] = '\0'; -+ master_conntrack->layer7.app_data_len = length + oldlength; -+ -+ return length; -+} -+ -+/* taken from drivers/video/modedb.c */ -+static int my_atoi(const char *s) -+{ -+ int val = 0; -+ -+ for (;; s++) { -+ switch (*s) { -+ case '0'...'9': -+ val = 10*val+(*s-'0'); -+ break; -+ default: -+ return val; -+ } -+ } -+} -+ -+/* write out num_packets to userland. */ -+static int layer7_read_proc(char* page, char ** start, off_t off, int count, -+ int* eof, void * data) -+{ -+ if(num_packets > 99 && net_ratelimit()) -+ printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n"); -+ -+ page[0] = num_packets/10 + '0'; -+ page[1] = num_packets%10 + '0'; -+ page[2] = '\n'; -+ page[3] = '\0'; -+ -+ *eof=1; -+ -+ return 3; -+} -+ -+/* Read in num_packets from userland */ -+static int layer7_write_proc(struct file* file, const char* buffer, -+ unsigned long count, void *data) -+{ -+ char * foo = kmalloc(count, GFP_ATOMIC); -+ -+ if(!foo){ -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory, bailing. " -+ "num_packets unchanged.\n"); -+ return count; -+ } -+ -+ if(copy_from_user(foo, buffer, count)) { -+ return -EFAULT; -+ } -+ -+ -+ num_packets = my_atoi(foo); -+ kfree (foo); -+ -+ /* This has an arbitrary limit to make the math easier. I'm lazy. -+ But anyway, 99 is a LOT! If you want more, you're doing it wrong! */ -+ if(num_packets > 99) { -+ printk(KERN_WARNING "layer7: num_packets can't be > 99.\n"); -+ num_packets = 99; -+ } else if(num_packets < 1) { -+ printk(KERN_WARNING "layer7: num_packets can't be < 1.\n"); -+ num_packets = 1; -+ } -+ -+ return count; -+} -+ -+static bool -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28) -+match(const struct sk_buff *skbin, const struct xt_match_param *par) -+#else -+match(const struct sk_buff *skbin, -+ const struct net_device *in, -+ const struct net_device *out, -+ const struct xt_match *match, -+ const void *matchinfo, -+ int offset, -+ unsigned int protoff, -+ bool *hotdrop) -+#endif -+{ -+ /* sidestep const without getting a compiler warning... */ -+ struct sk_buff * skb = (struct sk_buff *)skbin; -+ -+ const struct xt_layer7_info * info = -+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28) -+ par->matchinfo; -+ #else -+ matchinfo; -+ #endif -+ -+ enum ip_conntrack_info master_ctinfo, ctinfo; -+ struct nf_conn *master_conntrack, *conntrack; -+ unsigned char * app_data; -+ unsigned int pattern_result, appdatalen; -+ regexp * comppattern; -+ -+ /* Be paranoid/incompetent - lock the entire match function. */ -+ spin_lock_bh(&l7_lock); -+ -+ if(!can_handle(skb)){ -+ DPRINTK("layer7: This is some protocol I can't handle.\n"); -+ spin_unlock_bh(&l7_lock); -+ return info->invert; -+ } -+ -+ /* Treat parent & all its children together as one connection, except -+ for the purpose of setting conntrack->layer7.app_proto in the actual -+ connection. This makes /proc/net/ip_conntrack more satisfying. */ -+ if(!(conntrack = nf_ct_get(skb, &ctinfo)) || -+ !(master_conntrack=nf_ct_get(skb,&master_ctinfo))){ -+ DPRINTK("layer7: couldn't get conntrack.\n"); -+ spin_unlock_bh(&l7_lock); -+ return info->invert; -+ } -+ -+ /* Try to get a master conntrack (and its master etc) for FTP, etc. */ -+ while (master_ct(master_conntrack) != NULL) -+ master_conntrack = master_ct(master_conntrack); -+ -+ /* if we've classified it or seen too many packets */ -+ if(total_acct_packets(master_conntrack) > num_packets || -+ master_conntrack->layer7.app_proto) { -+ -+ pattern_result = match_no_append(conntrack, master_conntrack, -+ ctinfo, master_ctinfo, info); -+ -+ /* skb->cb[0] == seen. Don't do things twice if there are -+ multiple l7 rules. I'm not sure that using cb for this purpose -+ is correct, even though it says "put your private variables -+ there". But it doesn't look like it is being used for anything -+ else in the skbs that make it here. */ -+ skb->cb[0] = 1; /* marking it seen here's probably irrelevant */ -+ -+ spin_unlock_bh(&l7_lock); -+ return (pattern_result ^ info->invert); -+ } -+ -+ if(skb_is_nonlinear(skb)){ -+ if(skb_linearize(skb) != 0){ -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: failed to linearize " -+ "packet, bailing.\n"); -+ spin_unlock_bh(&l7_lock); -+ return info->invert; -+ } -+ } -+ -+ /* now that the skb is linearized, it's safe to set these. */ -+ app_data = skb->data + app_data_offset(skb); -+ appdatalen = skb_tail_pointer(skb) - app_data; -+ -+ /* the return value gets checked later, when we're ready to use it */ -+ comppattern = compile_and_cache(info->pattern, info->protocol); -+ -+ /* On the first packet of a connection, allocate space for app data */ -+ if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && -+ !master_conntrack->layer7.app_data){ -+ master_conntrack->layer7.app_data = -+ kmalloc(maxdatalen, GFP_ATOMIC); -+ if(!master_conntrack->layer7.app_data){ -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in " -+ "match, bailing.\n"); -+ spin_unlock_bh(&l7_lock); -+ return info->invert; -+ } -+ -+ master_conntrack->layer7.app_data[0] = '\0'; -+ } -+ -+ /* Can be here, but unallocated, if numpackets is increased near -+ the beginning of a connection */ -+ if(master_conntrack->layer7.app_data == NULL){ -+ spin_unlock_bh(&l7_lock); -+ return info->invert; /* unmatched */ -+ } -+ -+ if(!skb->cb[0]){ -+ int newbytes; -+ newbytes = add_data(master_conntrack, app_data, appdatalen); -+ -+ if(newbytes == 0) { /* didn't add any data */ -+ skb->cb[0] = 1; -+ /* Didn't match before, not going to match now */ -+ spin_unlock_bh(&l7_lock); -+ return info->invert; -+ } -+ } -+ -+ /* If looking for "unknown", then never match. "Unknown" means that -+ we've given up; we're still trying with these packets. */ -+ if(!strcmp(info->protocol, "unknown")) { -+ pattern_result = 0; -+ /* If looking for "unset", then always match. "Unset" means that we -+ haven't yet classified the connection. */ -+ } else if(!strcmp(info->protocol, "unset")) { -+ pattern_result = 2; -+ DPRINTK("layer7: matched unset: not yet classified " -+ "(%d/%d packets)\n", -+ total_acct_packets(master_conntrack), num_packets); -+ /* If the regexp failed to compile, don't bother running it */ -+ } else if(comppattern && -+ regexec(comppattern, master_conntrack->layer7.app_data)){ -+ DPRINTK("layer7: matched %s\n", info->protocol); -+ pattern_result = 1; -+ } else pattern_result = 0; -+ -+ if(pattern_result == 1) { -+ master_conntrack->layer7.app_proto = -+ kmalloc(strlen(info->protocol)+1, GFP_ATOMIC); -+ if(!master_conntrack->layer7.app_proto){ -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in " -+ "match, bailing.\n"); -+ spin_unlock_bh(&l7_lock); -+ return (pattern_result ^ info->invert); -+ } -+ strcpy(master_conntrack->layer7.app_proto, info->protocol); -+ } else if(pattern_result > 1) { /* cleanup from "unset" */ -+ pattern_result = 1; -+ } -+ -+ /* mark the packet seen */ -+ skb->cb[0] = 1; -+ -+ spin_unlock_bh(&l7_lock); -+ return (pattern_result ^ info->invert); -+} -+ -+// load nf_conntrack_ipv4 -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28) -+static bool check(const struct xt_mtchk_param *par) -+{ -+ if (nf_ct_l3proto_try_module_get(par->match->family) < 0) { -+ printk(KERN_WARNING "can't load conntrack support for " -+ "proto=%d\n", par->match->family); -+#else -+static bool check(const char *tablename, const void *inf, -+ const struct xt_match *match, void *matchinfo, -+ unsigned int hook_mask) -+{ -+ if (nf_ct_l3proto_try_module_get(match->family) < 0) { -+ printk(KERN_WARNING "can't load conntrack support for " -+ "proto=%d\n", match->family); -+#endif -+ return 0; -+ } -+ return 1; -+} -+ -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28) -+ static void destroy(const struct xt_mtdtor_param *par) -+ { -+ nf_ct_l3proto_module_put(par->match->family); -+ } -+#else -+ static void destroy(const struct xt_match *match, void *matchinfo) -+ { -+ nf_ct_l3proto_module_put(match->family); -+ } -+#endif -+ -+static struct xt_match xt_layer7_match[] __read_mostly = { -+{ -+ .name = "layer7", -+ .family = AF_INET, -+ .checkentry = check, -+ .match = match, -+ .destroy = destroy, -+ .matchsize = sizeof(struct xt_layer7_info), -+ .me = THIS_MODULE -+} -+}; -+ -+static void layer7_cleanup_proc(void) -+{ -+ remove_proc_entry("layer7_numpackets", init_net.proc_net); -+} -+ -+/* register the proc file */ -+static void layer7_init_proc(void) -+{ -+ struct proc_dir_entry* entry; -+ entry = create_proc_entry("layer7_numpackets", 0644, init_net.proc_net); -+ entry->read_proc = layer7_read_proc; -+ entry->write_proc = layer7_write_proc; -+} -+ -+static int __init xt_layer7_init(void) -+{ -+ need_conntrack(); -+ -+ layer7_init_proc(); -+ if(maxdatalen < 1) { -+ printk(KERN_WARNING "layer7: maxdatalen can't be < 1, " -+ "using 1\n"); -+ maxdatalen = 1; -+ } -+ /* This is not a hard limit. It's just here to prevent people from -+ bringing their slow machines to a grinding halt. */ -+ else if(maxdatalen > 65536) { -+ printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, " -+ "using 65536\n"); -+ maxdatalen = 65536; -+ } -+ return xt_register_matches(xt_layer7_match, -+ ARRAY_SIZE(xt_layer7_match)); -+} -+ -+static void __exit xt_layer7_fini(void) -+{ -+ layer7_cleanup_proc(); -+ xt_unregister_matches(xt_layer7_match, ARRAY_SIZE(xt_layer7_match)); -+} -+ -+module_init(xt_layer7_init); -+module_exit(xt_layer7_fini); ---- /dev/null -+++ b/net/netfilter/regexp/regexp.c -@@ -0,0 +1,1197 @@ -+/* -+ * regcomp and regexec -- regsub and regerror are elsewhere -+ * @(#)regexp.c 1.3 of 18 April 87 -+ * -+ * Copyright (c) 1986 by University of Toronto. -+ * Written by Henry Spencer. Not derived from licensed software. -+ * -+ * Permission is granted to anyone to use this software for any -+ * purpose on any computer system, and to redistribute it freely, -+ * subject to the following restrictions: -+ * -+ * 1. The author is not responsible for the consequences of use of -+ * this software, no matter how awful, even if they arise -+ * from defects in it. -+ * -+ * 2. The origin of this software must not be misrepresented, either -+ * by explicit claim or by omission. -+ * -+ * 3. Altered versions must be plainly marked as such, and must not -+ * be misrepresented as being the original software. -+ * -+ * Beware that some of this code is subtly aware of the way operator -+ * precedence is structured in regular expressions. Serious changes in -+ * regular-expression syntax might require a total rethink. -+ * -+ * This code was modified by Ethan Sommer to work within the kernel -+ * (it now uses kmalloc etc..) -+ * -+ * Modified slightly by Matthew Strait to use more modern C. -+ */ -+ -+#include "regexp.h" -+#include "regmagic.h" -+ -+/* added by ethan and matt. Lets it work in both kernel and user space. -+(So iptables can use it, for instance.) Yea, it goes both ways... */ -+#if __KERNEL__ -+ #define malloc(foo) kmalloc(foo,GFP_ATOMIC) -+#else -+ #define printk(format,args...) printf(format,##args) -+#endif -+ -+void regerror(char * s) -+{ -+ printk("<3>Regexp: %s\n", s); -+ /* NOTREACHED */ -+} -+ -+/* -+ * The "internal use only" fields in regexp.h are present to pass info from -+ * compile to execute that permits the execute phase to run lots faster on -+ * simple cases. They are: -+ * -+ * regstart char that must begin a match; '\0' if none obvious -+ * reganch is the match anchored (at beginning-of-line only)? -+ * regmust string (pointer into program) that match must include, or NULL -+ * regmlen length of regmust string -+ * -+ * Regstart and reganch permit very fast decisions on suitable starting points -+ * for a match, cutting down the work a lot. Regmust permits fast rejection -+ * of lines that cannot possibly match. The regmust tests are costly enough -+ * that regcomp() supplies a regmust only if the r.e. contains something -+ * potentially expensive (at present, the only such thing detected is * or + -+ * at the start of the r.e., which can involve a lot of backup). Regmlen is -+ * supplied because the test in regexec() needs it and regcomp() is computing -+ * it anyway. -+ */ -+ -+/* -+ * Structure for regexp "program". This is essentially a linear encoding -+ * of a nondeterministic finite-state machine (aka syntax charts or -+ * "railroad normal form" in parsing technology). Each node is an opcode -+ * plus a "next" pointer, possibly plus an operand. "Next" pointers of -+ * all nodes except BRANCH implement concatenation; a "next" pointer with -+ * a BRANCH on both ends of it is connecting two alternatives. (Here we -+ * have one of the subtle syntax dependencies: an individual BRANCH (as -+ * opposed to a collection of them) is never concatenated with anything -+ * because of operator precedence.) The operand of some types of node is -+ * a literal string; for others, it is a node leading into a sub-FSM. In -+ * particular, the operand of a BRANCH node is the first node of the branch. -+ * (NB this is *not* a tree structure: the tail of the branch connects -+ * to the thing following the set of BRANCHes.) The opcodes are: -+ */ -+ -+/* definition number opnd? meaning */ -+#define END 0 /* no End of program. */ -+#define BOL 1 /* no Match "" at beginning of line. */ -+#define EOL 2 /* no Match "" at end of line. */ -+#define ANY 3 /* no Match any one character. */ -+#define ANYOF 4 /* str Match any character in this string. */ -+#define ANYBUT 5 /* str Match any character not in this string. */ -+#define BRANCH 6 /* node Match this alternative, or the next... */ -+#define BACK 7 /* no Match "", "next" ptr points backward. */ -+#define EXACTLY 8 /* str Match this string. */ -+#define NOTHING 9 /* no Match empty string. */ -+#define STAR 10 /* node Match this (simple) thing 0 or more times. */ -+#define PLUS 11 /* node Match this (simple) thing 1 or more times. */ -+#define OPEN 20 /* no Mark this point in input as start of #n. */ -+ /* OPEN+1 is number 1, etc. */ -+#define CLOSE 30 /* no Analogous to OPEN. */ -+ -+/* -+ * Opcode notes: -+ * -+ * BRANCH The set of branches constituting a single choice are hooked -+ * together with their "next" pointers, since precedence prevents -+ * anything being concatenated to any individual branch. The -+ * "next" pointer of the last BRANCH in a choice points to the -+ * thing following the whole choice. This is also where the -+ * final "next" pointer of each individual branch points; each -+ * branch starts with the operand node of a BRANCH node. -+ * -+ * BACK Normal "next" pointers all implicitly point forward; BACK -+ * exists to make loop structures possible. -+ * -+ * STAR,PLUS '?', and complex '*' and '+', are implemented as circular -+ * BRANCH structures using BACK. Simple cases (one character -+ * per match) are implemented with STAR and PLUS for speed -+ * and to minimize recursive plunges. -+ * -+ * OPEN,CLOSE ...are numbered at compile time. -+ */ -+ -+/* -+ * A node is one char of opcode followed by two chars of "next" pointer. -+ * "Next" pointers are stored as two 8-bit pieces, high order first. The -+ * value is a positive offset from the opcode of the node containing it. -+ * An operand, if any, simply follows the node. (Note that much of the -+ * code generation knows about this implicit relationship.) -+ * -+ * Using two bytes for the "next" pointer is vast overkill for most things, -+ * but allows patterns to get big without disasters. -+ */ -+#define OP(p) (*(p)) -+#define NEXT(p) (((*((p)+1)&0377)<<8) + (*((p)+2)&0377)) -+#define OPERAND(p) ((p) + 3) -+ -+/* -+ * See regmagic.h for one further detail of program structure. -+ */ -+ -+ -+/* -+ * Utility definitions. -+ */ -+#ifndef CHARBITS -+#define UCHARAT(p) ((int)*(unsigned char *)(p)) -+#else -+#define UCHARAT(p) ((int)*(p)&CHARBITS) -+#endif -+ -+#define FAIL(m) { regerror(m); return(NULL); } -+#define ISMULT(c) ((c) == '*' || (c) == '+' || (c) == '?') -+#define META "^$.[()|?+*\\" -+ -+/* -+ * Flags to be passed up and down. -+ */ -+#define HASWIDTH 01 /* Known never to match null string. */ -+#define SIMPLE 02 /* Simple enough to be STAR/PLUS operand. */ -+#define SPSTART 04 /* Starts with * or +. */ -+#define WORST 0 /* Worst case. */ -+ -+/* -+ * Global work variables for regcomp(). -+ */ -+struct match_globals { -+char *reginput; /* String-input pointer. */ -+char *regbol; /* Beginning of input, for ^ check. */ -+char **regstartp; /* Pointer to startp array. */ -+char **regendp; /* Ditto for endp. */ -+char *regparse; /* Input-scan pointer. */ -+int regnpar; /* () count. */ -+char regdummy; -+char *regcode; /* Code-emit pointer; ®dummy = don't. */ -+long regsize; /* Code size. */ -+}; -+ -+/* -+ * Forward declarations for regcomp()'s friends. -+ */ -+#ifndef STATIC -+#define STATIC static -+#endif -+STATIC char *reg(struct match_globals *g, int paren,int *flagp); -+STATIC char *regbranch(struct match_globals *g, int *flagp); -+STATIC char *regpiece(struct match_globals *g, int *flagp); -+STATIC char *regatom(struct match_globals *g, int *flagp); -+STATIC char *regnode(struct match_globals *g, char op); -+STATIC char *regnext(struct match_globals *g, char *p); -+STATIC void regc(struct match_globals *g, char b); -+STATIC void reginsert(struct match_globals *g, char op, char *opnd); -+STATIC void regtail(struct match_globals *g, char *p, char *val); -+STATIC void regoptail(struct match_globals *g, char *p, char *val); -+ -+ -+__kernel_size_t my_strcspn(const char *s1,const char *s2) -+{ -+ char *scan1; -+ char *scan2; -+ int count; -+ -+ count = 0; -+ for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) { -+ for (scan2 = (char *)s2; *scan2 != '\0';) /* ++ moved down. */ -+ if (*scan1 == *scan2++) -+ return(count); -+ count++; -+ } -+ return(count); -+} -+ -+/* -+ - regcomp - compile a regular expression into internal code -+ * -+ * We can't allocate space until we know how big the compiled form will be, -+ * but we can't compile it (and thus know how big it is) until we've got a -+ * place to put the code. So we cheat: we compile it twice, once with code -+ * generation turned off and size counting turned on, and once "for real". -+ * This also means that we don't allocate space until we are sure that the -+ * thing really will compile successfully, and we never have to move the -+ * code and thus invalidate pointers into it. (Note that it has to be in -+ * one piece because free() must be able to free it all.) -+ * -+ * Beware that the optimization-preparation code in here knows about some -+ * of the structure of the compiled regexp. -+ */ -+regexp * -+regcomp(char *exp,int *patternsize) -+{ -+ register regexp *r; -+ register char *scan; -+ register char *longest; -+ register int len; -+ int flags; -+ struct match_globals g; -+ -+ /* commented out by ethan -+ extern char *malloc(); -+ */ -+ -+ if (exp == NULL) -+ FAIL("NULL argument"); -+ -+ /* First pass: determine size, legality. */ -+ g.regparse = exp; -+ g.regnpar = 1; -+ g.regsize = 0L; -+ g.regcode = &g.regdummy; -+ regc(&g, MAGIC); -+ if (reg(&g, 0, &flags) == NULL) -+ return(NULL); -+ -+ /* Small enough for pointer-storage convention? */ -+ if (g.regsize >= 32767L) /* Probably could be 65535L. */ -+ FAIL("regexp too big"); -+ -+ /* Allocate space. */ -+ *patternsize=sizeof(regexp) + (unsigned)g.regsize; -+ r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize); -+ if (r == NULL) -+ FAIL("out of space"); -+ -+ /* Second pass: emit code. */ -+ g.regparse = exp; -+ g.regnpar = 1; -+ g.regcode = r->program; -+ regc(&g, MAGIC); -+ if (reg(&g, 0, &flags) == NULL) -+ return(NULL); -+ -+ /* Dig out information for optimizations. */ -+ r->regstart = '\0'; /* Worst-case defaults. */ -+ r->reganch = 0; -+ r->regmust = NULL; -+ r->regmlen = 0; -+ scan = r->program+1; /* First BRANCH. */ -+ if (OP(regnext(&g, scan)) == END) { /* Only one top-level choice. */ -+ scan = OPERAND(scan); -+ -+ /* Starting-point info. */ -+ if (OP(scan) == EXACTLY) -+ r->regstart = *OPERAND(scan); -+ else if (OP(scan) == BOL) -+ r->reganch++; -+ -+ /* -+ * If there's something expensive in the r.e., find the -+ * longest literal string that must appear and make it the -+ * regmust. Resolve ties in favor of later strings, since -+ * the regstart check works with the beginning of the r.e. -+ * and avoiding duplication strengthens checking. Not a -+ * strong reason, but sufficient in the absence of others. -+ */ -+ if (flags&SPSTART) { -+ longest = NULL; -+ len = 0; -+ for (; scan != NULL; scan = regnext(&g, scan)) -+ if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) { -+ longest = OPERAND(scan); -+ len = strlen(OPERAND(scan)); -+ } -+ r->regmust = longest; -+ r->regmlen = len; -+ } -+ } -+ -+ return(r); -+} -+ -+/* -+ - reg - regular expression, i.e. main body or parenthesized thing -+ * -+ * Caller must absorb opening parenthesis. -+ * -+ * Combining parenthesis handling with the base level of regular expression -+ * is a trifle forced, but the need to tie the tails of the branches to what -+ * follows makes it hard to avoid. -+ */ -+static char * -+reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ ) -+{ -+ register char *ret; -+ register char *br; -+ register char *ender; -+ register int parno = 0; /* 0 makes gcc happy */ -+ int flags; -+ -+ *flagp = HASWIDTH; /* Tentatively. */ -+ -+ /* Make an OPEN node, if parenthesized. */ -+ if (paren) { -+ if (g->regnpar >= NSUBEXP) -+ FAIL("too many ()"); -+ parno = g->regnpar; -+ g->regnpar++; -+ ret = regnode(g, OPEN+parno); -+ } else -+ ret = NULL; -+ -+ /* Pick up the branches, linking them together. */ -+ br = regbranch(g, &flags); -+ if (br == NULL) -+ return(NULL); -+ if (ret != NULL) -+ regtail(g, ret, br); /* OPEN -> first. */ -+ else -+ ret = br; -+ if (!(flags&HASWIDTH)) -+ *flagp &= ~HASWIDTH; -+ *flagp |= flags&SPSTART; -+ while (*g->regparse == '|') { -+ g->regparse++; -+ br = regbranch(g, &flags); -+ if (br == NULL) -+ return(NULL); -+ regtail(g, ret, br); /* BRANCH -> BRANCH. */ -+ if (!(flags&HASWIDTH)) -+ *flagp &= ~HASWIDTH; -+ *flagp |= flags&SPSTART; -+ } -+ -+ /* Make a closing node, and hook it on the end. */ -+ ender = regnode(g, (paren) ? CLOSE+parno : END); -+ regtail(g, ret, ender); -+ -+ /* Hook the tails of the branches to the closing node. */ -+ for (br = ret; br != NULL; br = regnext(g, br)) -+ regoptail(g, br, ender); -+ -+ /* Check for proper termination. */ -+ if (paren && *g->regparse++ != ')') { -+ FAIL("unmatched ()"); -+ } else if (!paren && *g->regparse != '\0') { -+ if (*g->regparse == ')') { -+ FAIL("unmatched ()"); -+ } else -+ FAIL("junk on end"); /* "Can't happen". */ -+ /* NOTREACHED */ -+ } -+ -+ return(ret); -+} -+ -+/* -+ - regbranch - one alternative of an | operator -+ * -+ * Implements the concatenation operator. -+ */ -+static char * -+regbranch(struct match_globals *g, int *flagp) -+{ -+ register char *ret; -+ register char *chain; -+ register char *latest; -+ int flags; -+ -+ *flagp = WORST; /* Tentatively. */ -+ -+ ret = regnode(g, BRANCH); -+ chain = NULL; -+ while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') { -+ latest = regpiece(g, &flags); -+ if (latest == NULL) -+ return(NULL); -+ *flagp |= flags&HASWIDTH; -+ if (chain == NULL) /* First piece. */ -+ *flagp |= flags&SPSTART; -+ else -+ regtail(g, chain, latest); -+ chain = latest; -+ } -+ if (chain == NULL) /* Loop ran zero times. */ -+ (void) regnode(g, NOTHING); -+ -+ return(ret); -+} -+ -+/* -+ - regpiece - something followed by possible [*+?] -+ * -+ * Note that the branching code sequences used for ? and the general cases -+ * of * and + are somewhat optimized: they use the same NOTHING node as -+ * both the endmarker for their branch list and the body of the last branch. -+ * It might seem that this node could be dispensed with entirely, but the -+ * endmarker role is not redundant. -+ */ -+static char * -+regpiece(struct match_globals *g, int *flagp) -+{ -+ register char *ret; -+ register char op; -+ register char *next; -+ int flags; -+ -+ ret = regatom(g, &flags); -+ if (ret == NULL) -+ return(NULL); -+ -+ op = *g->regparse; -+ if (!ISMULT(op)) { -+ *flagp = flags; -+ return(ret); -+ } -+ -+ if (!(flags&HASWIDTH) && op != '?') -+ FAIL("*+ operand could be empty"); -+ *flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH); -+ -+ if (op == '*' && (flags&SIMPLE)) -+ reginsert(g, STAR, ret); -+ else if (op == '*') { -+ /* Emit x* as (x&|), where & means "self". */ -+ reginsert(g, BRANCH, ret); /* Either x */ -+ regoptail(g, ret, regnode(g, BACK)); /* and loop */ -+ regoptail(g, ret, ret); /* back */ -+ regtail(g, ret, regnode(g, BRANCH)); /* or */ -+ regtail(g, ret, regnode(g, NOTHING)); /* null. */ -+ } else if (op == '+' && (flags&SIMPLE)) -+ reginsert(g, PLUS, ret); -+ else if (op == '+') { -+ /* Emit x+ as x(&|), where & means "self". */ -+ next = regnode(g, BRANCH); /* Either */ -+ regtail(g, ret, next); -+ regtail(g, regnode(g, BACK), ret); /* loop back */ -+ regtail(g, next, regnode(g, BRANCH)); /* or */ -+ regtail(g, ret, regnode(g, NOTHING)); /* null. */ -+ } else if (op == '?') { -+ /* Emit x? as (x|) */ -+ reginsert(g, BRANCH, ret); /* Either x */ -+ regtail(g, ret, regnode(g, BRANCH)); /* or */ -+ next = regnode(g, NOTHING); /* null. */ -+ regtail(g, ret, next); -+ regoptail(g, ret, next); -+ } -+ g->regparse++; -+ if (ISMULT(*g->regparse)) -+ FAIL("nested *?+"); -+ -+ return(ret); -+} -+ -+/* -+ - regatom - the lowest level -+ * -+ * Optimization: gobbles an entire sequence of ordinary characters so that -+ * it can turn them into a single node, which is smaller to store and -+ * faster to run. Backslashed characters are exceptions, each becoming a -+ * separate node; the code is simpler that way and it's not worth fixing. -+ */ -+static char * -+regatom(struct match_globals *g, int *flagp) -+{ -+ register char *ret; -+ int flags; -+ -+ *flagp = WORST; /* Tentatively. */ -+ -+ switch (*g->regparse++) { -+ case '^': -+ ret = regnode(g, BOL); -+ break; -+ case '$': -+ ret = regnode(g, EOL); -+ break; -+ case '.': -+ ret = regnode(g, ANY); -+ *flagp |= HASWIDTH|SIMPLE; -+ break; -+ case '[': { -+ register int class; -+ register int classend; -+ -+ if (*g->regparse == '^') { /* Complement of range. */ -+ ret = regnode(g, ANYBUT); -+ g->regparse++; -+ } else -+ ret = regnode(g, ANYOF); -+ if (*g->regparse == ']' || *g->regparse == '-') -+ regc(g, *g->regparse++); -+ while (*g->regparse != '\0' && *g->regparse != ']') { -+ if (*g->regparse == '-') { -+ g->regparse++; -+ if (*g->regparse == ']' || *g->regparse == '\0') -+ regc(g, '-'); -+ else { -+ class = UCHARAT(g->regparse-2)+1; -+ classend = UCHARAT(g->regparse); -+ if (class > classend+1) -+ FAIL("invalid [] range"); -+ for (; class <= classend; class++) -+ regc(g, class); -+ g->regparse++; -+ } -+ } else -+ regc(g, *g->regparse++); -+ } -+ regc(g, '\0'); -+ if (*g->regparse != ']') -+ FAIL("unmatched []"); -+ g->regparse++; -+ *flagp |= HASWIDTH|SIMPLE; -+ } -+ break; -+ case '(': -+ ret = reg(g, 1, &flags); -+ if (ret == NULL) -+ return(NULL); -+ *flagp |= flags&(HASWIDTH|SPSTART); -+ break; -+ case '\0': -+ case '|': -+ case ')': -+ FAIL("internal urp"); /* Supposed to be caught earlier. */ -+ break; -+ case '?': -+ case '+': -+ case '*': -+ FAIL("?+* follows nothing"); -+ break; -+ case '\\': -+ if (*g->regparse == '\0') -+ FAIL("trailing \\"); -+ ret = regnode(g, EXACTLY); -+ regc(g, *g->regparse++); -+ regc(g, '\0'); -+ *flagp |= HASWIDTH|SIMPLE; -+ break; -+ default: { -+ register int len; -+ register char ender; -+ -+ g->regparse--; -+ len = my_strcspn((const char *)g->regparse, (const char *)META); -+ if (len <= 0) -+ FAIL("internal disaster"); -+ ender = *(g->regparse+len); -+ if (len > 1 && ISMULT(ender)) -+ len--; /* Back off clear of ?+* operand. */ -+ *flagp |= HASWIDTH; -+ if (len == 1) -+ *flagp |= SIMPLE; -+ ret = regnode(g, EXACTLY); -+ while (len > 0) { -+ regc(g, *g->regparse++); -+ len--; -+ } -+ regc(g, '\0'); -+ } -+ break; -+ } -+ -+ return(ret); -+} -+ -+/* -+ - regnode - emit a node -+ */ -+static char * /* Location. */ -+regnode(struct match_globals *g, char op) -+{ -+ register char *ret; -+ register char *ptr; -+ -+ ret = g->regcode; -+ if (ret == &g->regdummy) { -+ g->regsize += 3; -+ return(ret); -+ } -+ -+ ptr = ret; -+ *ptr++ = op; -+ *ptr++ = '\0'; /* Null "next" pointer. */ -+ *ptr++ = '\0'; -+ g->regcode = ptr; -+ -+ return(ret); -+} -+ -+/* -+ - regc - emit (if appropriate) a byte of code -+ */ -+static void -+regc(struct match_globals *g, char b) -+{ -+ if (g->regcode != &g->regdummy) -+ *g->regcode++ = b; -+ else -+ g->regsize++; -+} -+ -+/* -+ - reginsert - insert an operator in front of already-emitted operand -+ * -+ * Means relocating the operand. -+ */ -+static void -+reginsert(struct match_globals *g, char op, char* opnd) -+{ -+ register char *src; -+ register char *dst; -+ register char *place; -+ -+ if (g->regcode == &g->regdummy) { -+ g->regsize += 3; -+ return; -+ } -+ -+ src = g->regcode; -+ g->regcode += 3; -+ dst = g->regcode; -+ while (src > opnd) -+ *--dst = *--src; -+ -+ place = opnd; /* Op node, where operand used to be. */ -+ *place++ = op; -+ *place++ = '\0'; -+ *place++ = '\0'; -+} -+ -+/* -+ - regtail - set the next-pointer at the end of a node chain -+ */ -+static void -+regtail(struct match_globals *g, char *p, char *val) -+{ -+ register char *scan; -+ register char *temp; -+ register int offset; -+ -+ if (p == &g->regdummy) -+ return; -+ -+ /* Find last node. */ -+ scan = p; -+ for (;;) { -+ temp = regnext(g, scan); -+ if (temp == NULL) -+ break; -+ scan = temp; -+ } -+ -+ if (OP(scan) == BACK) -+ offset = scan - val; -+ else -+ offset = val - scan; -+ *(scan+1) = (offset>>8)&0377; -+ *(scan+2) = offset&0377; -+} -+ -+/* -+ - regoptail - regtail on operand of first argument; nop if operandless -+ */ -+static void -+regoptail(struct match_globals *g, char *p, char *val) -+{ -+ /* "Operandless" and "op != BRANCH" are synonymous in practice. */ -+ if (p == NULL || p == &g->regdummy || OP(p) != BRANCH) -+ return; -+ regtail(g, OPERAND(p), val); -+} -+ -+/* -+ * regexec and friends -+ */ -+ -+ -+/* -+ * Forwards. -+ */ -+STATIC int regtry(struct match_globals *g, regexp *prog, char *string); -+STATIC int regmatch(struct match_globals *g, char *prog); -+STATIC int regrepeat(struct match_globals *g, char *p); -+ -+#ifdef DEBUG -+int regnarrate = 0; -+void regdump(); -+STATIC char *regprop(char *op); -+#endif -+ -+/* -+ - regexec - match a regexp against a string -+ */ -+int -+regexec(regexp *prog, char *string) -+{ -+ register char *s; -+ struct match_globals g; -+ -+ /* Be paranoid... */ -+ if (prog == NULL || string == NULL) { -+ printk("<3>Regexp: NULL parameter\n"); -+ return(0); -+ } -+ -+ /* Check validity of program. */ -+ if (UCHARAT(prog->program) != MAGIC) { -+ printk("<3>Regexp: corrupted program\n"); -+ return(0); -+ } -+ -+ /* If there is a "must appear" string, look for it. */ -+ if (prog->regmust != NULL) { -+ s = string; -+ while ((s = strchr(s, prog->regmust[0])) != NULL) { -+ if (strncmp(s, prog->regmust, prog->regmlen) == 0) -+ break; /* Found it. */ -+ s++; -+ } -+ if (s == NULL) /* Not present. */ -+ return(0); -+ } -+ -+ /* Mark beginning of line for ^ . */ -+ g.regbol = string; -+ -+ /* Simplest case: anchored match need be tried only once. */ -+ if (prog->reganch) -+ return(regtry(&g, prog, string)); -+ -+ /* Messy cases: unanchored match. */ -+ s = string; -+ if (prog->regstart != '\0') -+ /* We know what char it must start with. */ -+ while ((s = strchr(s, prog->regstart)) != NULL) { -+ if (regtry(&g, prog, s)) -+ return(1); -+ s++; -+ } -+ else -+ /* We don't -- general case. */ -+ do { -+ if (regtry(&g, prog, s)) -+ return(1); -+ } while (*s++ != '\0'); -+ -+ /* Failure. */ -+ return(0); -+} -+ -+/* -+ - regtry - try match at specific point -+ */ -+static int /* 0 failure, 1 success */ -+regtry(struct match_globals *g, regexp *prog, char *string) -+{ -+ register int i; -+ register char **sp; -+ register char **ep; -+ -+ g->reginput = string; -+ g->regstartp = prog->startp; -+ g->regendp = prog->endp; -+ -+ sp = prog->startp; -+ ep = prog->endp; -+ for (i = NSUBEXP; i > 0; i--) { -+ *sp++ = NULL; -+ *ep++ = NULL; -+ } -+ if (regmatch(g, prog->program + 1)) { -+ prog->startp[0] = string; -+ prog->endp[0] = g->reginput; -+ return(1); -+ } else -+ return(0); -+} -+ -+/* -+ - regmatch - main matching routine -+ * -+ * Conceptually the strategy is simple: check to see whether the current -+ * node matches, call self recursively to see whether the rest matches, -+ * and then act accordingly. In practice we make some effort to avoid -+ * recursion, in particular by going through "ordinary" nodes (that don't -+ * need to know whether the rest of the match failed) by a loop instead of -+ * by recursion. -+ */ -+static int /* 0 failure, 1 success */ -+regmatch(struct match_globals *g, char *prog) -+{ -+ register char *scan = prog; /* Current node. */ -+ char *next; /* Next node. */ -+ -+#ifdef DEBUG -+ if (scan != NULL && regnarrate) -+ fprintf(stderr, "%s(\n", regprop(scan)); -+#endif -+ while (scan != NULL) { -+#ifdef DEBUG -+ if (regnarrate) -+ fprintf(stderr, "%s...\n", regprop(scan)); -+#endif -+ next = regnext(g, scan); -+ -+ switch (OP(scan)) { -+ case BOL: -+ if (g->reginput != g->regbol) -+ return(0); -+ break; -+ case EOL: -+ if (*g->reginput != '\0') -+ return(0); -+ break; -+ case ANY: -+ if (*g->reginput == '\0') -+ return(0); -+ g->reginput++; -+ break; -+ case EXACTLY: { -+ register int len; -+ register char *opnd; -+ -+ opnd = OPERAND(scan); -+ /* Inline the first character, for speed. */ -+ if (*opnd != *g->reginput) -+ return(0); -+ len = strlen(opnd); -+ if (len > 1 && strncmp(opnd, g->reginput, len) != 0) -+ return(0); -+ g->reginput += len; -+ } -+ break; -+ case ANYOF: -+ if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL) -+ return(0); -+ g->reginput++; -+ break; -+ case ANYBUT: -+ if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL) -+ return(0); -+ g->reginput++; -+ break; -+ case NOTHING: -+ case BACK: -+ break; -+ case OPEN+1: -+ case OPEN+2: -+ case OPEN+3: -+ case OPEN+4: -+ case OPEN+5: -+ case OPEN+6: -+ case OPEN+7: -+ case OPEN+8: -+ case OPEN+9: { -+ register int no; -+ register char *save; -+ -+ no = OP(scan) - OPEN; -+ save = g->reginput; -+ -+ if (regmatch(g, next)) { -+ /* -+ * Don't set startp if some later -+ * invocation of the same parentheses -+ * already has. -+ */ -+ if (g->regstartp[no] == NULL) -+ g->regstartp[no] = save; -+ return(1); -+ } else -+ return(0); -+ } -+ break; -+ case CLOSE+1: -+ case CLOSE+2: -+ case CLOSE+3: -+ case CLOSE+4: -+ case CLOSE+5: -+ case CLOSE+6: -+ case CLOSE+7: -+ case CLOSE+8: -+ case CLOSE+9: -+ { -+ register int no; -+ register char *save; -+ -+ no = OP(scan) - CLOSE; -+ save = g->reginput; -+ -+ if (regmatch(g, next)) { -+ /* -+ * Don't set endp if some later -+ * invocation of the same parentheses -+ * already has. -+ */ -+ if (g->regendp[no] == NULL) -+ g->regendp[no] = save; -+ return(1); -+ } else -+ return(0); -+ } -+ break; -+ case BRANCH: { -+ register char *save; -+ -+ if (OP(next) != BRANCH) /* No choice. */ -+ next = OPERAND(scan); /* Avoid recursion. */ -+ else { -+ do { -+ save = g->reginput; -+ if (regmatch(g, OPERAND(scan))) -+ return(1); -+ g->reginput = save; -+ scan = regnext(g, scan); -+ } while (scan != NULL && OP(scan) == BRANCH); -+ return(0); -+ /* NOTREACHED */ -+ } -+ } -+ break; -+ case STAR: -+ case PLUS: { -+ register char nextch; -+ register int no; -+ register char *save; -+ register int min; -+ -+ /* -+ * Lookahead to avoid useless match attempts -+ * when we know what character comes next. -+ */ -+ nextch = '\0'; -+ if (OP(next) == EXACTLY) -+ nextch = *OPERAND(next); -+ min = (OP(scan) == STAR) ? 0 : 1; -+ save = g->reginput; -+ no = regrepeat(g, OPERAND(scan)); -+ while (no >= min) { -+ /* If it could work, try it. */ -+ if (nextch == '\0' || *g->reginput == nextch) -+ if (regmatch(g, next)) -+ return(1); -+ /* Couldn't or didn't -- back up. */ -+ no--; -+ g->reginput = save + no; -+ } -+ return(0); -+ } -+ break; -+ case END: -+ return(1); /* Success! */ -+ break; -+ default: -+ printk("<3>Regexp: memory corruption\n"); -+ return(0); -+ break; -+ } -+ -+ scan = next; -+ } -+ -+ /* -+ * We get here only if there's trouble -- normally "case END" is -+ * the terminating point. -+ */ -+ printk("<3>Regexp: corrupted pointers\n"); -+ return(0); -+} -+ -+/* -+ - regrepeat - repeatedly match something simple, report how many -+ */ -+static int -+regrepeat(struct match_globals *g, char *p) -+{ -+ register int count = 0; -+ register char *scan; -+ register char *opnd; -+ -+ scan = g->reginput; -+ opnd = OPERAND(p); -+ switch (OP(p)) { -+ case ANY: -+ count = strlen(scan); -+ scan += count; -+ break; -+ case EXACTLY: -+ while (*opnd == *scan) { -+ count++; -+ scan++; -+ } -+ break; -+ case ANYOF: -+ while (*scan != '\0' && strchr(opnd, *scan) != NULL) { -+ count++; -+ scan++; -+ } -+ break; -+ case ANYBUT: -+ while (*scan != '\0' && strchr(opnd, *scan) == NULL) { -+ count++; -+ scan++; -+ } -+ break; -+ default: /* Oh dear. Called inappropriately. */ -+ printk("<3>Regexp: internal foulup\n"); -+ count = 0; /* Best compromise. */ -+ break; -+ } -+ g->reginput = scan; -+ -+ return(count); -+} -+ -+/* -+ - regnext - dig the "next" pointer out of a node -+ */ -+static char* -+regnext(struct match_globals *g, char *p) -+{ -+ register int offset; -+ -+ if (p == &g->regdummy) -+ return(NULL); -+ -+ offset = NEXT(p); -+ if (offset == 0) -+ return(NULL); -+ -+ if (OP(p) == BACK) -+ return(p-offset); -+ else -+ return(p+offset); -+} -+ -+#ifdef DEBUG -+ -+STATIC char *regprop(); -+ -+/* -+ - regdump - dump a regexp onto stdout in vaguely comprehensible form -+ */ -+void -+regdump(regexp *r) -+{ -+ register char *s; -+ register char op = EXACTLY; /* Arbitrary non-END op. */ -+ register char *next; -+ /* extern char *strchr(); */ -+ -+ -+ s = r->program + 1; -+ while (op != END) { /* While that wasn't END last time... */ -+ op = OP(s); -+ printf("%2d%s", s-r->program, regprop(s)); /* Where, what. */ -+ next = regnext(s); -+ if (next == NULL) /* Next ptr. */ -+ printf("(0)"); -+ else -+ printf("(%d)", (s-r->program)+(next-s)); -+ s += 3; -+ if (op == ANYOF || op == ANYBUT || op == EXACTLY) { -+ /* Literal string, where present. */ -+ while (*s != '\0') { -+ putchar(*s); -+ s++; -+ } -+ s++; -+ } -+ putchar('\n'); -+ } -+ -+ /* Header fields of interest. */ -+ if (r->regstart != '\0') -+ printf("start `%c' ", r->regstart); -+ if (r->reganch) -+ printf("anchored "); -+ if (r->regmust != NULL) -+ printf("must have \"%s\"", r->regmust); -+ printf("\n"); -+} -+ -+/* -+ - regprop - printable representation of opcode -+ */ -+static char * -+regprop(char *op) -+{ -+#define BUFLEN 50 -+ register char *p; -+ static char buf[BUFLEN]; -+ -+ strcpy(buf, ":"); -+ -+ switch (OP(op)) { -+ case BOL: -+ p = "BOL"; -+ break; -+ case EOL: -+ p = "EOL"; -+ break; -+ case ANY: -+ p = "ANY"; -+ break; -+ case ANYOF: -+ p = "ANYOF"; -+ break; -+ case ANYBUT: -+ p = "ANYBUT"; -+ break; -+ case BRANCH: -+ p = "BRANCH"; -+ break; -+ case EXACTLY: -+ p = "EXACTLY"; -+ break; -+ case NOTHING: -+ p = "NOTHING"; -+ break; -+ case BACK: -+ p = "BACK"; -+ break; -+ case END: -+ p = "END"; -+ break; -+ case OPEN+1: -+ case OPEN+2: -+ case OPEN+3: -+ case OPEN+4: -+ case OPEN+5: -+ case OPEN+6: -+ case OPEN+7: -+ case OPEN+8: -+ case OPEN+9: -+ snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN); -+ p = NULL; -+ break; -+ case CLOSE+1: -+ case CLOSE+2: -+ case CLOSE+3: -+ case CLOSE+4: -+ case CLOSE+5: -+ case CLOSE+6: -+ case CLOSE+7: -+ case CLOSE+8: -+ case CLOSE+9: -+ snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE); -+ p = NULL; -+ break; -+ case STAR: -+ p = "STAR"; -+ break; -+ case PLUS: -+ p = "PLUS"; -+ break; -+ default: -+ printk("<3>Regexp: corrupted opcode\n"); -+ break; -+ } -+ if (p != NULL) -+ strncat(buf, p, BUFLEN-strlen(buf)); -+ return(buf); -+} -+#endif -+ -+ ---- /dev/null -+++ b/net/netfilter/regexp/regexp.h -@@ -0,0 +1,41 @@ -+/* -+ * Definitions etc. for regexp(3) routines. -+ * -+ * Caveat: this is V8 regexp(3) [actually, a reimplementation thereof], -+ * not the System V one. -+ */ -+ -+#ifndef REGEXP_H -+#define REGEXP_H -+ -+ -+/* -+http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h , -+which contains a version of this library, says: -+ -+ * -+ * NSUBEXP must be at least 10, and no greater than 117 or the parser -+ * will not work properly. -+ * -+ -+However, it looks rather like this library is limited to 10. If you think -+otherwise, let us know. -+*/ -+ -+#define NSUBEXP 10 -+typedef struct regexp { -+ char *startp[NSUBEXP]; -+ char *endp[NSUBEXP]; -+ char regstart; /* Internal use only. */ -+ char reganch; /* Internal use only. */ -+ char *regmust; /* Internal use only. */ -+ int regmlen; /* Internal use only. */ -+ char program[1]; /* Unwarranted chumminess with compiler. */ -+} regexp; -+ -+regexp * regcomp(char *exp, int *patternsize); -+int regexec(regexp *prog, char *string); -+void regsub(regexp *prog, char *source, char *dest); -+void regerror(char *s); -+ -+#endif ---- /dev/null -+++ b/net/netfilter/regexp/regmagic.h -@@ -0,0 +1,5 @@ -+/* -+ * The first byte of the regexp internal "program" is actually this magic -+ * number; the start node begins in the second byte. -+ */ -+#define MAGIC 0234 ---- /dev/null -+++ b/net/netfilter/regexp/regsub.c -@@ -0,0 +1,95 @@ -+/* -+ * regsub -+ * @(#)regsub.c 1.3 of 2 April 86 -+ * -+ * Copyright (c) 1986 by University of Toronto. -+ * Written by Henry Spencer. Not derived from licensed software. -+ * -+ * Permission is granted to anyone to use this software for any -+ * purpose on any computer system, and to redistribute it freely, -+ * subject to the following restrictions: -+ * -+ * 1. The author is not responsible for the consequences of use of -+ * this software, no matter how awful, even if they arise -+ * from defects in it. -+ * -+ * 2. The origin of this software must not be misrepresented, either -+ * by explicit claim or by omission. -+ * -+ * 3. Altered versions must be plainly marked as such, and must not -+ * be misrepresented as being the original software. -+ * -+ * -+ * This code was modified by Ethan Sommer to work within the kernel -+ * (it now uses kmalloc etc..) -+ * -+ */ -+#include "regexp.h" -+#include "regmagic.h" -+#include -+ -+ -+#ifndef CHARBITS -+#define UCHARAT(p) ((int)*(unsigned char *)(p)) -+#else -+#define UCHARAT(p) ((int)*(p)&CHARBITS) -+#endif -+ -+#if 0 -+//void regerror(char * s) -+//{ -+// printk("regexp(3): %s", s); -+// /* NOTREACHED */ -+//} -+#endif -+ -+/* -+ - regsub - perform substitutions after a regexp match -+ */ -+void -+regsub(regexp * prog, char * source, char * dest) -+{ -+ register char *src; -+ register char *dst; -+ register char c; -+ register int no; -+ register int len; -+ -+ /* Not necessary and gcc doesn't like it -MLS */ -+ /*extern char *strncpy();*/ -+ -+ if (prog == NULL || source == NULL || dest == NULL) { -+ regerror("NULL parm to regsub"); -+ return; -+ } -+ if (UCHARAT(prog->program) != MAGIC) { -+ regerror("damaged regexp fed to regsub"); -+ return; -+ } -+ -+ src = source; -+ dst = dest; -+ while ((c = *src++) != '\0') { -+ if (c == '&') -+ no = 0; -+ else if (c == '\\' && '0' <= *src && *src <= '9') -+ no = *src++ - '0'; -+ else -+ no = -1; -+ -+ if (no < 0) { /* Ordinary character. */ -+ if (c == '\\' && (*src == '\\' || *src == '&')) -+ c = *src++; -+ *dst++ = c; -+ } else if (prog->startp[no] != NULL && prog->endp[no] != NULL) { -+ len = prog->endp[no] - prog->startp[no]; -+ (void) strncpy(dst, prog->startp[no], len); -+ dst += len; -+ if (len != 0 && *(dst-1) == '\0') { /* strncpy hit NUL. */ -+ regerror("damaged match string"); -+ return; -+ } -+ } -+ } -+ *dst++ = '\0'; -+} ---- a/net/netfilter/nf_conntrack_core.c -+++ b/net/netfilter/nf_conntrack_core.c -@@ -214,6 +214,14 @@ destroy_conntrack(struct nf_conntrack *n - * too. */ - nf_ct_remove_expectations(ct); - -+ #if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE) -+ if(ct->layer7.app_proto) -+ kfree(ct->layer7.app_proto); -+ if(ct->layer7.app_data) -+ kfree(ct->layer7.app_data); -+ #endif -+ -+ - /* We overload first tuple to link into unconfirmed list. */ - if (!nf_ct_is_confirmed(ct)) { - BUG_ON(hlist_nulls_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode)); ---- a/net/netfilter/nf_conntrack_standalone.c -+++ b/net/netfilter/nf_conntrack_standalone.c -@@ -239,6 +239,12 @@ static int ct_seq_show(struct seq_file * - if (ct_show_delta_time(s, ct)) - goto release; - -+#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE) -+ if(ct->layer7.app_proto && -+ seq_printf(s, "l7proto=%s ", ct->layer7.app_proto)) -+ return -ENOSPC; -+#endif -+ - if (seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use))) - goto release; - ---- a/include/net/netfilter/nf_conntrack.h -+++ b/include/net/netfilter/nf_conntrack.h -@@ -134,6 +134,22 @@ struct nf_conn { - struct net *ct_net; - #endif - -+#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || \ -+ defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE) -+ struct { -+ /* -+ * e.g. "http". NULL before decision. "unknown" after decision -+ * if no match. -+ */ -+ char *app_proto; -+ /* -+ * application layer data so far. NULL after match decision. -+ */ -+ char *app_data; -+ unsigned int app_data_len; -+ } layer7; -+#endif -+ - /* Storage reserved for other modules, must be the last member */ - union nf_conntrack_proto proto; - }; ---- /dev/null -+++ b/include/linux/netfilter/xt_layer7.h -@@ -0,0 +1,13 @@ -+#ifndef _XT_LAYER7_H -+#define _XT_LAYER7_H -+ -+#define MAX_PATTERN_LEN 8192 -+#define MAX_PROTOCOL_LEN 256 -+ -+struct xt_layer7_info { -+ char protocol[MAX_PROTOCOL_LEN]; -+ char pattern[MAX_PATTERN_LEN]; -+ u_int8_t invert; -+}; -+ -+#endif /* _XT_LAYER7_H */ ---- a/include/linux/netfilter/Kbuild -+++ b/include/linux/netfilter/Kbuild -@@ -49,6 +49,7 @@ header-y += xt_hashlimit.h - header-y += xt_helper.h - header-y += xt_iprange.h - header-y += xt_ipvs.h -+header-y += xt_layer7.h - header-y += xt_length.h - header-y += xt_limit.h - header-y += xt_mac.h diff --git a/target/linux/generic/patches-3.3/601-netfilter_layer7_pktmatch.patch b/target/linux/generic/patches-3.3/601-netfilter_layer7_pktmatch.patch deleted file mode 100644 index f65e301fd1..0000000000 --- a/target/linux/generic/patches-3.3/601-netfilter_layer7_pktmatch.patch +++ /dev/null @@ -1,108 +0,0 @@ ---- a/include/linux/netfilter/xt_layer7.h -+++ b/include/linux/netfilter/xt_layer7.h -@@ -8,6 +8,7 @@ struct xt_layer7_info { - char protocol[MAX_PROTOCOL_LEN]; - char pattern[MAX_PATTERN_LEN]; - u_int8_t invert; -+ u_int8_t pkt; - }; - - #endif /* _XT_LAYER7_H */ ---- a/net/netfilter/xt_layer7.c -+++ b/net/netfilter/xt_layer7.c -@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con - } - - /* add the new app data to the conntrack. Return number of bytes added. */ --static int add_data(struct nf_conn * master_conntrack, -- char * app_data, int appdatalen) -+static int add_datastr(char *target, int offset, char *app_data, int len) - { - int length = 0, i; -- int oldlength = master_conntrack->layer7.app_data_len; -- -- /* This is a fix for a race condition by Deti Fliegl. However, I'm not -- clear on whether the race condition exists or whether this really -- fixes it. I might just be being dense... Anyway, if it's not really -- a fix, all it does is waste a very small amount of time. */ -- if(!master_conntrack->layer7.app_data) return 0; -+ if (!target) return 0; - - /* Strip nulls. Make everything lower case (our regex lib doesn't - do case insensitivity). Add it to the end of the current data. */ -- for(i = 0; i < maxdatalen-oldlength-1 && -- i < appdatalen; i++) { -+ for(i = 0; i < maxdatalen-offset-1 && i < len; i++) { - if(app_data[i] != '\0') { - /* the kernel version of tolower mungs 'upper ascii' */ -- master_conntrack->layer7.app_data[length+oldlength] = -+ target[length+offset] = - isascii(app_data[i])? - tolower(app_data[i]) : app_data[i]; - length++; - } - } -+ target[length+offset] = '\0'; -+ -+ return length; -+} -+ -+/* add the new app data to the conntrack. Return number of bytes added. */ -+static int add_data(struct nf_conn * master_conntrack, -+ char * app_data, int appdatalen) -+{ -+ int length; - -- master_conntrack->layer7.app_data[length+oldlength] = '\0'; -- master_conntrack->layer7.app_data_len = length + oldlength; -+ length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen); -+ master_conntrack->layer7.app_data_len += length; - - return length; - } -@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin, - - enum ip_conntrack_info master_ctinfo, ctinfo; - struct nf_conn *master_conntrack, *conntrack; -- unsigned char * app_data; -+ unsigned char *app_data, *tmp_data; - unsigned int pattern_result, appdatalen; - regexp * comppattern; - -@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin, - master_conntrack = master_ct(master_conntrack); - - /* if we've classified it or seen too many packets */ -- if(total_acct_packets(master_conntrack) > num_packets || -- master_conntrack->layer7.app_proto) { -+ if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets || -+ master_conntrack->layer7.app_proto)) { - - pattern_result = match_no_append(conntrack, master_conntrack, - ctinfo, master_ctinfo, info); -@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin, - /* the return value gets checked later, when we're ready to use it */ - comppattern = compile_and_cache(info->pattern, info->protocol); - -+ if (info->pkt) { -+ tmp_data = kmalloc(maxdatalen, GFP_ATOMIC); -+ if(!tmp_data){ -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in match, bailing.\n"); -+ return info->invert; -+ } -+ -+ tmp_data[0] = '\0'; -+ add_datastr(tmp_data, 0, app_data, appdatalen); -+ pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0); -+ -+ kfree(tmp_data); -+ tmp_data = NULL; -+ spin_unlock_bh(&l7_lock); -+ -+ return (pattern_result ^ info->invert); -+ } -+ - /* On the first packet of a connection, allocate space for app data */ - if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && - !master_conntrack->layer7.app_data){ diff --git a/target/linux/generic/patches-3.3/602-netfilter_layer7_match.patch b/target/linux/generic/patches-3.3/602-netfilter_layer7_match.patch deleted file mode 100644 index b2e48c824f..0000000000 --- a/target/linux/generic/patches-3.3/602-netfilter_layer7_match.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/net/netfilter/xt_layer7.c -+++ b/net/netfilter/xt_layer7.c -@@ -415,7 +415,9 @@ static int layer7_write_proc(struct file - } - - static bool --#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28) -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35) -+match(const struct sk_buff *skbin, struct xt_action_param *par) -+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28) - match(const struct sk_buff *skbin, const struct xt_match_param *par) - #else - match(const struct sk_buff *skbin, -@@ -597,14 +599,19 @@ match(const struct sk_buff *skbin, - } - - // load nf_conntrack_ipv4 -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35) -+static int -+#else -+static bool -+#endif - #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28) --static bool check(const struct xt_mtchk_param *par) -+check(const struct xt_mtchk_param *par) - { - if (nf_ct_l3proto_try_module_get(par->match->family) < 0) { - printk(KERN_WARNING "can't load conntrack support for " - "proto=%d\n", par->match->family); - #else --static bool check(const char *tablename, const void *inf, -+check(const char *tablename, const void *inf, - const struct xt_match *match, void *matchinfo, - unsigned int hook_mask) - { -@@ -612,9 +619,15 @@ static bool check(const char *tablename, - printk(KERN_WARNING "can't load conntrack support for " - "proto=%d\n", match->family); - #endif -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35) -+ return -EINVAL; -+ } -+ return 0; -+#else - return 0; - } - return 1; -+#endif - } - - diff --git a/target/linux/generic/patches-3.3/603-netfilter_layer7_2.6.36_fix.patch b/target/linux/generic/patches-3.3/603-netfilter_layer7_2.6.36_fix.patch deleted file mode 100644 index 92a7200602..0000000000 --- a/target/linux/generic/patches-3.3/603-netfilter_layer7_2.6.36_fix.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/net/netfilter/Kconfig -+++ b/net/netfilter/Kconfig -@@ -857,6 +857,27 @@ config NETFILTER_XT_MATCH_IPVS - - If unsure, say N. - -+config NETFILTER_XT_MATCH_LAYER7 -+ tristate '"layer7" match support' -+ depends on EXPERIMENTAL -+ depends on NETFILTER_XTABLES -+ depends on NETFILTER_ADVANCED -+ depends on NF_CONNTRACK -+ help -+ Say Y if you want to be able to classify connections (and their -+ packets) based on regular expression matching of their application -+ layer data. This is one way to classify applications such as -+ peer-to-peer filesharing systems that do not always use the same -+ port. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ -+config NETFILTER_XT_MATCH_LAYER7_DEBUG -+ bool 'Layer 7 debugging output' -+ depends on NETFILTER_XT_MATCH_LAYER7 -+ help -+ Say Y to get lots of debugging output. -+ - config NETFILTER_XT_MATCH_LENGTH - tristate '"length" match support' - depends on NETFILTER_ADVANCED -@@ -1053,26 +1074,11 @@ config NETFILTER_XT_MATCH_STATE - - To compile it as a module, choose M here. If unsure, say N. - --config NETFILTER_XT_MATCH_LAYER7 -- tristate '"layer7" match support' -- depends on NETFILTER_XTABLES -- depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK) -- depends on NETFILTER_ADVANCED -- help -- Say Y if you want to be able to classify connections (and their -- packets) based on regular expression matching of their application -- layer data. This is one way to classify applications such as -- peer-to-peer filesharing systems that do not always use the same -- port. -- -- To compile it as a module, choose M here. If unsure, say N. -- - config NETFILTER_XT_MATCH_LAYER7_DEBUG -- bool 'Layer 7 debugging output' -- depends on NETFILTER_XT_MATCH_LAYER7 -- help -- Say Y to get lots of debugging output. -- -+ bool 'Layer 7 debugging output' -+ depends on NETFILTER_XT_MATCH_LAYER7 -+ help -+ Say Y to get lots of debugging output. - - config NETFILTER_XT_MATCH_STATISTIC - tristate '"statistic" match support' diff --git a/target/linux/generic/patches-3.3/604-netfilter_conntrack_flush.patch b/target/linux/generic/patches-3.3/604-netfilter_conntrack_flush.patch deleted file mode 100644 index a17ba1cf80..0000000000 --- a/target/linux/generic/patches-3.3/604-netfilter_conntrack_flush.patch +++ /dev/null @@ -1,86 +0,0 @@ ---- a/net/netfilter/nf_conntrack_standalone.c -+++ b/net/netfilter/nf_conntrack_standalone.c -@@ -16,6 +16,7 @@ - #include - #include - #include -+#include - #include - #ifdef CONFIG_SYSCTL - #include -@@ -267,10 +268,66 @@ static int ct_open(struct inode *inode, - sizeof(struct ct_iter_state)); - } - -+struct kill_request { -+ u16 family; -+ union nf_inet_addr addr; -+}; -+ -+static int kill_matching(struct nf_conn *i, void *data) -+{ -+ struct kill_request *kr = data; -+ struct nf_conntrack_tuple *t1 = &i->tuplehash[IP_CT_DIR_ORIGINAL].tuple; -+ struct nf_conntrack_tuple *t2 = &i->tuplehash[IP_CT_DIR_REPLY].tuple; -+ -+ if (!kr->family) -+ return 1; -+ -+ if (t1->src.l3num != kr->family) -+ return 0; -+ -+ return (nf_inet_addr_cmp(&kr->addr, &t1->src.u3) || -+ nf_inet_addr_cmp(&kr->addr, &t1->dst.u3) || -+ nf_inet_addr_cmp(&kr->addr, &t2->src.u3) || -+ nf_inet_addr_cmp(&kr->addr, &t2->dst.u3)); -+} -+ -+static ssize_t ct_file_write(struct file *file, const char __user *buf, -+ size_t count, loff_t *ppos) -+{ -+ struct seq_file *seq = file->private_data; -+ struct net *net = seq_file_net(seq); -+ struct kill_request kr = { }; -+ char req[INET6_ADDRSTRLEN] = { }; -+ -+ if (count == 0) -+ return 0; -+ -+ if (count >= INET6_ADDRSTRLEN) -+ count = INET6_ADDRSTRLEN - 1; -+ -+ if (copy_from_user(req, buf, count)) -+ return -EFAULT; -+ -+ if (strnchr(req, count, ':')) { -+ kr.family = AF_INET6; -+ if (!in6_pton(req, count, (void *)&kr.addr, '\n', NULL)) -+ return -EINVAL; -+ } else if (strnchr(req, count, '.')) { -+ kr.family = AF_INET; -+ if (!in4_pton(req, count, (void *)&kr.addr, '\n', NULL)) -+ return -EINVAL; -+ } -+ -+ nf_ct_iterate_cleanup(net, kill_matching, &kr); -+ -+ return count; -+} -+ - static const struct file_operations ct_file_ops = { - .owner = THIS_MODULE, - .open = ct_open, - .read = seq_read, -+ .write = ct_file_write, - .llseek = seq_lseek, - .release = seq_release_net, - }; -@@ -372,7 +429,7 @@ static int nf_conntrack_standalone_init_ - { - struct proc_dir_entry *pde; - -- pde = proc_net_fops_create(net, "nf_conntrack", 0440, &ct_file_ops); -+ pde = proc_net_fops_create(net, "nf_conntrack", 0660, &ct_file_ops); - if (!pde) - goto out_nf_conntrack; - diff --git a/target/linux/generic/patches-3.3/610-netfilter_match_bypass_default_checks.patch b/target/linux/generic/patches-3.3/610-netfilter_match_bypass_default_checks.patch deleted file mode 100644 index 51c9e0999b..0000000000 --- a/target/linux/generic/patches-3.3/610-netfilter_match_bypass_default_checks.patch +++ /dev/null @@ -1,93 +0,0 @@ ---- a/include/linux/netfilter_ipv4/ip_tables.h -+++ b/include/linux/netfilter_ipv4/ip_tables.h -@@ -93,6 +93,7 @@ struct ipt_ip { - #define IPT_F_FRAG 0x01 /* Set if rule is a fragment rule */ - #define IPT_F_GOTO 0x02 /* Set if jump is a goto */ - #define IPT_F_MASK 0x03 /* All possible flag bits mask. */ -+#define IPT_F_NO_DEF_MATCH 0x80 /* Internal: no default match rules present */ - - /* Values for "inv" field in struct ipt_ip. */ - #define IPT_INV_VIA_IN 0x01 /* Invert the sense of IN IFACE. */ ---- a/net/ipv4/netfilter/ip_tables.c -+++ b/net/ipv4/netfilter/ip_tables.c -@@ -81,6 +81,9 @@ ip_packet_match(const struct iphdr *ip, - - #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg))) - -+ if (ipinfo->flags & IPT_F_NO_DEF_MATCH) -+ return true; -+ - if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr, - IPT_INV_SRCIP) || - FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr, -@@ -134,6 +137,29 @@ ip_packet_match(const struct iphdr *ip, - return true; - } - -+static void -+ip_checkdefault(struct ipt_ip *ip) -+{ -+ static const char iface_mask[IFNAMSIZ] = {}; -+ -+ if (ip->invflags || ip->flags & IPT_F_FRAG) -+ return; -+ -+ if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0) -+ return; -+ -+ if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0) -+ return; -+ -+ if (ip->smsk.s_addr || ip->dmsk.s_addr) -+ return; -+ -+ if (ip->proto) -+ return; -+ -+ ip->flags |= IPT_F_NO_DEF_MATCH; -+} -+ - static bool - ip_checkentry(const struct ipt_ip *ip) - { -@@ -561,7 +587,7 @@ static void cleanup_match(struct xt_entr - } - - static int --check_entry(const struct ipt_entry *e, const char *name) -+check_entry(struct ipt_entry *e, const char *name) - { - const struct xt_entry_target *t; - -@@ -570,6 +596,8 @@ check_entry(const struct ipt_entry *e, c - return -EINVAL; - } - -+ ip_checkdefault(&e->ip); -+ - if (e->target_offset + sizeof(struct xt_entry_target) > - e->next_offset) - return -EINVAL; -@@ -931,6 +959,7 @@ copy_entries_to_user(unsigned int total_ - const struct xt_table_info *private = table->private; - int ret = 0; - const void *loc_cpu_entry; -+ u8 flags; - - counters = alloc_counters(table); - if (IS_ERR(counters)) -@@ -961,6 +990,14 @@ copy_entries_to_user(unsigned int total_ - ret = -EFAULT; - goto free_counters; - } -+ -+ flags = e->ip.flags & IPT_F_MASK; -+ if (copy_to_user(userptr + off -+ + offsetof(struct ipt_entry, ip.flags), -+ &flags, sizeof(flags)) != 0) { -+ ret = -EFAULT; -+ goto free_counters; -+ } - - for (i = sizeof(struct ipt_entry); - i < e->target_offset; diff --git a/target/linux/generic/patches-3.3/611-netfilter_match_bypass_default_table.patch b/target/linux/generic/patches-3.3/611-netfilter_match_bypass_default_table.patch deleted file mode 100644 index 3cf0e5a32d..0000000000 --- a/target/linux/generic/patches-3.3/611-netfilter_match_bypass_default_table.patch +++ /dev/null @@ -1,81 +0,0 @@ ---- a/net/ipv4/netfilter/ip_tables.c -+++ b/net/ipv4/netfilter/ip_tables.c -@@ -310,6 +310,33 @@ struct ipt_entry *ipt_next_entry(const s - return (void *)entry + entry->next_offset; - } - -+static bool -+ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict) -+{ -+ struct xt_entry_target *t; -+ struct xt_standard_target *st; -+ -+ if (e->target_offset != sizeof(struct ipt_entry)) -+ return false; -+ -+ if (!(e->ip.flags & IPT_F_NO_DEF_MATCH)) -+ return false; -+ -+ t = ipt_get_target(e); -+ if (t->u.kernel.target->target) -+ return false; -+ -+ st = (struct xt_standard_target *) t; -+ if (st->verdict == XT_RETURN) -+ return false; -+ -+ if (st->verdict >= 0) -+ return false; -+ -+ *verdict = (unsigned)(-st->verdict) - 1; -+ return true; -+} -+ - /* Returns one of the generic firewall policies, like NF_ACCEPT. */ - unsigned int - ipt_do_table(struct sk_buff *skb, -@@ -334,6 +361,25 @@ ipt_do_table(struct sk_buff *skb, - ip = ip_hdr(skb); - indev = in ? in->name : nulldevname; - outdev = out ? out->name : nulldevname; -+ -+ IP_NF_ASSERT(table->valid_hooks & (1 << hook)); -+ local_bh_disable(); -+ addend = xt_write_recseq_begin(); -+ private = table->private; -+ cpu = smp_processor_id(); -+ table_base = private->entries[cpu]; -+ jumpstack = (struct ipt_entry **)private->jumpstack[cpu]; -+ stackptr = per_cpu_ptr(private->stackptr, cpu); -+ origptr = *stackptr; -+ -+ e = get_entry(table_base, private->hook_entry[hook]); -+ if (ipt_handle_default_rule(e, &verdict)) { -+ ADD_COUNTER(e->counters, skb->len, 1); -+ xt_write_recseq_end(addend); -+ local_bh_enable(); -+ return verdict; -+ } -+ - /* We handle fragments by dealing with the first fragment as - * if it was a normal packet. All other fragments are treated - * normally, except that they will NEVER match rules that ask -@@ -348,18 +394,6 @@ ipt_do_table(struct sk_buff *skb, - acpar.family = NFPROTO_IPV4; - acpar.hooknum = hook; - -- IP_NF_ASSERT(table->valid_hooks & (1 << hook)); -- local_bh_disable(); -- addend = xt_write_recseq_begin(); -- private = table->private; -- cpu = smp_processor_id(); -- table_base = private->entries[cpu]; -- jumpstack = (struct ipt_entry **)private->jumpstack[cpu]; -- stackptr = per_cpu_ptr(private->stackptr, cpu); -- origptr = *stackptr; -- -- e = get_entry(table_base, private->hook_entry[hook]); -- - pr_debug("Entering %s(hook %u); sp at %u (UF %p)\n", - table->name, hook, origptr, - get_entry(table_base, private->underflow[hook])); diff --git a/target/linux/generic/patches-3.3/612-netfilter_match_reduce_memory_access.patch b/target/linux/generic/patches-3.3/612-netfilter_match_reduce_memory_access.patch deleted file mode 100644 index f506165e1d..0000000000 --- a/target/linux/generic/patches-3.3/612-netfilter_match_reduce_memory_access.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/net/ipv4/netfilter/ip_tables.c -+++ b/net/ipv4/netfilter/ip_tables.c -@@ -84,9 +84,11 @@ ip_packet_match(const struct iphdr *ip, - if (ipinfo->flags & IPT_F_NO_DEF_MATCH) - return true; - -- if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr, -+ if (FWINV(ipinfo->smsk.s_addr && -+ (ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr, - IPT_INV_SRCIP) || -- FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr, -+ FWINV(ipinfo->dmsk.s_addr && -+ (ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr, - IPT_INV_DSTIP)) { - dprintf("Source or dest mismatch.\n"); - diff --git a/target/linux/generic/patches-3.3/613-netfilter_optional_tcp_window_check.patch b/target/linux/generic/patches-3.3/613-netfilter_optional_tcp_window_check.patch deleted file mode 100644 index 1c259d4f0c..0000000000 --- a/target/linux/generic/patches-3.3/613-netfilter_optional_tcp_window_check.patch +++ /dev/null @@ -1,36 +0,0 @@ ---- a/net/netfilter/nf_conntrack_proto_tcp.c -+++ b/net/netfilter/nf_conntrack_proto_tcp.c -@@ -29,6 +29,9 @@ - #include - #include - -+/* Do not check the TCP window for incoming packets */ -+static int nf_ct_tcp_no_window_check __read_mostly = 1; -+ - /* "Be conservative in what you do, - be liberal in what you accept from others." - If it's non-zero, we mark only out of window RST segments as INVALID. */ -@@ -524,6 +527,9 @@ static bool tcp_in_window(const struct n - s16 receiver_offset; - bool res; - -+ if (nf_ct_tcp_no_window_check) -+ return true; -+ - /* - * Get the required data from the packet. - */ -@@ -1321,6 +1327,13 @@ static struct ctl_table tcp_sysctl_table - .proc_handler = proc_dointvec, - }, - { -+ .procname = "nf_conntrack_tcp_no_window_check", -+ .data = &nf_ct_tcp_no_window_check, -+ .maxlen = sizeof(unsigned int), -+ .mode = 0644, -+ .proc_handler = proc_dointvec, -+ }, -+ { - .procname = "nf_conntrack_tcp_be_liberal", - .data = &nf_ct_tcp_be_liberal, - .maxlen = sizeof(unsigned int), diff --git a/target/linux/generic/patches-3.3/615-netfilter_add_xt_id_match.patch b/target/linux/generic/patches-3.3/615-netfilter_add_xt_id_match.patch deleted file mode 100644 index 14fe61b12d..0000000000 --- a/target/linux/generic/patches-3.3/615-netfilter_add_xt_id_match.patch +++ /dev/null @@ -1,95 +0,0 @@ ---- a/net/netfilter/Kconfig -+++ b/net/netfilter/Kconfig -@@ -837,6 +837,13 @@ config NETFILTER_XT_MATCH_HL - in the IPv6 header, or the time-to-live field in the IPv4 - header of the packet. - -+config NETFILTER_XT_MATCH_ID -+ tristate '"id" match support' -+ depends on NETFILTER_ADVANCED -+ ---help--- -+ This option adds a `id' dummy-match, which allows you to put -+ numeric IDs into your iptables ruleset. -+ - config NETFILTER_XT_MATCH_IPRANGE - tristate '"iprange" address range match support' - depends on NETFILTER_ADVANCED ---- a/net/netfilter/Makefile -+++ b/net/netfilter/Makefile -@@ -86,6 +86,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_ESP) += - obj-$(CONFIG_NETFILTER_XT_MATCH_HASHLIMIT) += xt_hashlimit.o - obj-$(CONFIG_NETFILTER_XT_MATCH_HELPER) += xt_helper.o - obj-$(CONFIG_NETFILTER_XT_MATCH_HL) += xt_hl.o -+obj-$(CONFIG_NETFILTER_XT_MATCH_ID) += xt_id.o - obj-$(CONFIG_NETFILTER_XT_MATCH_IPRANGE) += xt_iprange.o - obj-$(CONFIG_NETFILTER_XT_MATCH_IPVS) += xt_ipvs.o - obj-$(CONFIG_NETFILTER_XT_MATCH_LENGTH) += xt_length.o ---- /dev/null -+++ b/net/netfilter/xt_id.c -@@ -0,0 +1,45 @@ -+/* -+ * Implements a dummy match to allow attaching IDs to rules -+ * -+ * 2014-08-01 Jo-Philipp Wich -+ */ -+ -+#include -+#include -+#include -+#include -+ -+MODULE_AUTHOR("Jo-Philipp Wich "); -+MODULE_DESCRIPTION("Xtables: No-op match which can be tagged with a 32bit ID"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("ipt_id"); -+MODULE_ALIAS("ip6t_id"); -+ -+static bool -+id_mt(const struct sk_buff *skb, struct xt_action_param *par) -+{ -+ /* We always match */ -+ return true; -+} -+ -+static struct xt_match id_mt_reg __read_mostly = { -+ .name = "id", -+ .revision = 0, -+ .family = NFPROTO_UNSPEC, -+ .match = id_mt, -+ .matchsize = sizeof(struct xt_id_info), -+ .me = THIS_MODULE, -+}; -+ -+static int __init id_mt_init(void) -+{ -+ return xt_register_match(&id_mt_reg); -+} -+ -+static void __exit id_mt_exit(void) -+{ -+ xt_unregister_match(&id_mt_reg); -+} -+ -+module_init(id_mt_init); -+module_exit(id_mt_exit); ---- a/include/linux/netfilter/Kbuild -+++ b/include/linux/netfilter/Kbuild -@@ -47,6 +47,7 @@ header-y += xt_ecn.h - header-y += xt_esp.h - header-y += xt_hashlimit.h - header-y += xt_helper.h -+header-y += xt_id.h - header-y += xt_iprange.h - header-y += xt_ipvs.h - header-y += xt_layer7.h ---- /dev/null -+++ b/include/linux/netfilter/xt_id.h -@@ -0,0 +1,8 @@ -+#ifndef _XT_ID_H -+#define _XT_ID_H -+ -+struct xt_id_info { -+ u32 id; -+}; -+ -+#endif /* XT_ID_H */ diff --git a/target/linux/generic/patches-3.3/620-sched_esfq.patch b/target/linux/generic/patches-3.3/620-sched_esfq.patch deleted file mode 100644 index 1fdf09d099..0000000000 --- a/target/linux/generic/patches-3.3/620-sched_esfq.patch +++ /dev/null @@ -1,791 +0,0 @@ ---- a/include/linux/pkt_sched.h -+++ b/include/linux/pkt_sched.h -@@ -193,6 +193,33 @@ struct tc_sfq_xstats { - __s32 allot; - }; - -+/* ESFQ section */ -+ -+enum -+{ -+ /* traditional */ -+ TCA_SFQ_HASH_CLASSIC, -+ TCA_SFQ_HASH_DST, -+ TCA_SFQ_HASH_SRC, -+ TCA_SFQ_HASH_FWMARK, -+ /* conntrack */ -+ TCA_SFQ_HASH_CTORIGDST, -+ TCA_SFQ_HASH_CTORIGSRC, -+ TCA_SFQ_HASH_CTREPLDST, -+ TCA_SFQ_HASH_CTREPLSRC, -+ TCA_SFQ_HASH_CTNATCHG, -+}; -+ -+struct tc_esfq_qopt -+{ -+ unsigned quantum; /* Bytes per round allocated to flow */ -+ int perturb_period; /* Period of hash perturbation */ -+ __u32 limit; /* Maximal packets in queue */ -+ unsigned divisor; /* Hash divisor */ -+ unsigned flows; /* Maximal number of flows */ -+ unsigned hash_kind; /* Hash function to use for flow identification */ -+}; -+ - /* RED section */ - - enum { ---- a/net/sched/Kconfig -+++ b/net/sched/Kconfig -@@ -148,6 +148,37 @@ config NET_SCH_SFQ - To compile this code as a module, choose M here: the - module will be called sch_sfq. - -+config NET_SCH_ESFQ -+ tristate "Enhanced Stochastic Fairness Queueing (ESFQ)" -+ ---help--- -+ Say Y here if you want to use the Enhanced Stochastic Fairness -+ Queueing (ESFQ) packet scheduling algorithm for some of your network -+ devices or as a leaf discipline for a classful qdisc such as HTB or -+ CBQ (see the top of for details and -+ references to the SFQ algorithm). -+ -+ This is an enchanced SFQ version which allows you to control some -+ hardcoded values in the SFQ scheduler. -+ -+ ESFQ also adds control of the hash function used to identify packet -+ flows. The original SFQ discipline hashes by connection; ESFQ add -+ several other hashing methods, such as by src IP or by dst IP, which -+ can be more fair to users in some networking situations. -+ -+ To compile this code as a module, choose M here: the -+ module will be called sch_esfq. -+ -+config NET_SCH_ESFQ_NFCT -+ bool "Connection Tracking Hash Types" -+ depends on NET_SCH_ESFQ && NF_CONNTRACK -+ ---help--- -+ Say Y here to enable support for hashing based on netfilter connection -+ tracking information. This is useful for a router that is also using -+ NAT to connect privately-addressed hosts to the Internet. If you want -+ to provide fair distribution of upstream bandwidth, ESFQ must use -+ connection tracking information, since all outgoing packets will share -+ the same source address. -+ - config NET_SCH_TEQL - tristate "True Link Equalizer (TEQL)" - ---help--- ---- a/net/sched/Makefile -+++ b/net/sched/Makefile -@@ -26,6 +26,7 @@ obj-$(CONFIG_NET_SCH_INGRESS) += sch_ing - obj-$(CONFIG_NET_SCH_DSMARK) += sch_dsmark.o - obj-$(CONFIG_NET_SCH_SFB) += sch_sfb.o - obj-$(CONFIG_NET_SCH_SFQ) += sch_sfq.o -+obj-$(CONFIG_NET_SCH_ESFQ) += sch_esfq.o - obj-$(CONFIG_NET_SCH_TBF) += sch_tbf.o - obj-$(CONFIG_NET_SCH_TEQL) += sch_teql.o - obj-$(CONFIG_NET_SCH_PRIO) += sch_prio.o ---- /dev/null -+++ b/net/sched/sch_esfq.c -@@ -0,0 +1,702 @@ -+/* -+ * net/sched/sch_esfq.c Extended Stochastic Fairness Queueing discipline. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ * -+ * Authors: Alexey Kuznetsov, -+ * -+ * Changes: Alexander Atanasov, -+ * Added dynamic depth,limit,divisor,hash_kind options. -+ * Added dst and src hashes. -+ * -+ * Alexander Clouter, -+ * Ported ESFQ to Linux 2.6. -+ * -+ * Corey Hickey, -+ * Maintenance of the Linux 2.6 port. -+ * Added fwmark hash (thanks to Robert Kurjata). -+ * Added usage of jhash. -+ * Added conntrack support. -+ * Added ctnatchg hash (thanks to Ben Pfountz). -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#ifdef CONFIG_NET_SCH_ESFQ_NFCT -+#include -+#endif -+ -+/* Stochastic Fairness Queuing algorithm. -+ For more comments look at sch_sfq.c. -+ The difference is that you can change limit, depth, -+ hash table size and choose alternate hash types. -+ -+ classic: same as in sch_sfq.c -+ dst: destination IP address -+ src: source IP address -+ fwmark: netfilter mark value -+ ctorigdst: original destination IP address -+ ctorigsrc: original source IP address -+ ctrepldst: reply destination IP address -+ ctreplsrc: reply source IP -+ -+*/ -+ -+#define ESFQ_HEAD 0 -+#define ESFQ_TAIL 1 -+ -+/* This type should contain at least SFQ_DEPTH*2 values */ -+typedef unsigned int esfq_index; -+ -+struct esfq_head -+{ -+ esfq_index next; -+ esfq_index prev; -+}; -+ -+struct esfq_sched_data -+{ -+/* Parameters */ -+ int perturb_period; -+ unsigned quantum; /* Allotment per round: MUST BE >= MTU */ -+ int limit; -+ unsigned depth; -+ unsigned hash_divisor; -+ unsigned hash_kind; -+/* Variables */ -+ struct timer_list perturb_timer; -+ int perturbation; -+ esfq_index tail; /* Index of current slot in round */ -+ esfq_index max_depth; /* Maximal depth */ -+ -+ esfq_index *ht; /* Hash table */ -+ esfq_index *next; /* Active slots link */ -+ short *allot; /* Current allotment per slot */ -+ unsigned short *hash; /* Hash value indexed by slots */ -+ struct sk_buff_head *qs; /* Slot queue */ -+ struct esfq_head *dep; /* Linked list of slots, indexed by depth */ -+}; -+ -+/* This contains the info we will hash. */ -+struct esfq_packet_info -+{ -+ u32 proto; /* protocol or port */ -+ u32 src; /* source from packet header */ -+ u32 dst; /* destination from packet header */ -+ u32 ctorigsrc; /* original source from conntrack */ -+ u32 ctorigdst; /* original destination from conntrack */ -+ u32 ctreplsrc; /* reply source from conntrack */ -+ u32 ctrepldst; /* reply destination from conntrack */ -+ u32 mark; /* netfilter mark (fwmark) */ -+}; -+ -+static __inline__ unsigned esfq_jhash_1word(struct esfq_sched_data *q,u32 a) -+{ -+ return jhash_1word(a, q->perturbation) & (q->hash_divisor-1); -+} -+ -+static __inline__ unsigned esfq_jhash_2words(struct esfq_sched_data *q, u32 a, u32 b) -+{ -+ return jhash_2words(a, b, q->perturbation) & (q->hash_divisor-1); -+} -+ -+static __inline__ unsigned esfq_jhash_3words(struct esfq_sched_data *q, u32 a, u32 b, u32 c) -+{ -+ return jhash_3words(a, b, c, q->perturbation) & (q->hash_divisor-1); -+} -+ -+static unsigned esfq_hash(struct esfq_sched_data *q, struct sk_buff *skb) -+{ -+ struct esfq_packet_info info; -+#ifdef CONFIG_NET_SCH_ESFQ_NFCT -+ enum ip_conntrack_info ctinfo; -+ struct nf_conn *ct = nf_ct_get(skb, &ctinfo); -+#endif -+ -+ switch (skb->protocol) { -+ case __constant_htons(ETH_P_IP): -+ { -+ struct iphdr *iph = ip_hdr(skb); -+ info.dst = iph->daddr; -+ info.src = iph->saddr; -+ if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) && -+ (iph->protocol == IPPROTO_TCP || -+ iph->protocol == IPPROTO_UDP || -+ iph->protocol == IPPROTO_SCTP || -+ iph->protocol == IPPROTO_DCCP || -+ iph->protocol == IPPROTO_ESP)) -+ info.proto = *(((u32*)iph) + iph->ihl); -+ else -+ info.proto = iph->protocol; -+ break; -+ } -+ case __constant_htons(ETH_P_IPV6): -+ { -+ struct ipv6hdr *iph = ipv6_hdr(skb); -+ /* Hash ipv6 addresses into a u32. This isn't ideal, -+ * but the code is simple. */ -+ info.dst = jhash2(iph->daddr.s6_addr32, 4, q->perturbation); -+ info.src = jhash2(iph->saddr.s6_addr32, 4, q->perturbation); -+ if (iph->nexthdr == IPPROTO_TCP || -+ iph->nexthdr == IPPROTO_UDP || -+ iph->nexthdr == IPPROTO_SCTP || -+ iph->nexthdr == IPPROTO_DCCP || -+ iph->nexthdr == IPPROTO_ESP) -+ info.proto = *(u32*)&iph[1]; -+ else -+ info.proto = iph->nexthdr; -+ break; -+ } -+ default: -+ info.dst = (u32)(unsigned long)skb_dst(skb); -+ info.src = (u32)(unsigned long)skb->sk; -+ info.proto = skb->protocol; -+ } -+ -+ info.mark = skb->mark; -+ -+#ifdef CONFIG_NET_SCH_ESFQ_NFCT -+ /* defaults if there is no conntrack info */ -+ info.ctorigsrc = info.src; -+ info.ctorigdst = info.dst; -+ info.ctreplsrc = info.dst; -+ info.ctrepldst = info.src; -+ /* collect conntrack info */ -+ if (ct && ct != &nf_conntrack_untracked) { -+ if (skb->protocol == __constant_htons(ETH_P_IP)) { -+ info.ctorigsrc = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip; -+ info.ctorigdst = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip; -+ info.ctreplsrc = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip; -+ info.ctrepldst = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip; -+ } -+ else if (skb->protocol == __constant_htons(ETH_P_IPV6)) { -+ /* Again, hash ipv6 addresses into a single u32. */ -+ info.ctorigsrc = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6, 4, q->perturbation); -+ info.ctorigdst = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip6, 4, q->perturbation); -+ info.ctreplsrc = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip6, 4, q->perturbation); -+ info.ctrepldst = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip6, 4, q->perturbation); -+ } -+ -+ } -+#endif -+ -+ switch(q->hash_kind) { -+ case TCA_SFQ_HASH_CLASSIC: -+ return esfq_jhash_3words(q, info.dst, info.src, info.proto); -+ case TCA_SFQ_HASH_DST: -+ return esfq_jhash_1word(q, info.dst); -+ case TCA_SFQ_HASH_SRC: -+ return esfq_jhash_1word(q, info.src); -+ case TCA_SFQ_HASH_FWMARK: -+ return esfq_jhash_1word(q, info.mark); -+#ifdef CONFIG_NET_SCH_ESFQ_NFCT -+ case TCA_SFQ_HASH_CTORIGDST: -+ return esfq_jhash_1word(q, info.ctorigdst); -+ case TCA_SFQ_HASH_CTORIGSRC: -+ return esfq_jhash_1word(q, info.ctorigsrc); -+ case TCA_SFQ_HASH_CTREPLDST: -+ return esfq_jhash_1word(q, info.ctrepldst); -+ case TCA_SFQ_HASH_CTREPLSRC: -+ return esfq_jhash_1word(q, info.ctreplsrc); -+ case TCA_SFQ_HASH_CTNATCHG: -+ { -+ if (info.ctorigdst == info.ctreplsrc) -+ return esfq_jhash_1word(q, info.ctorigsrc); -+ return esfq_jhash_1word(q, info.ctreplsrc); -+ } -+#endif -+ default: -+ if (net_ratelimit()) -+ printk(KERN_WARNING "ESFQ: Unknown hash method. Falling back to classic.\n"); -+ } -+ return esfq_jhash_3words(q, info.dst, info.src, info.proto); -+} -+ -+static inline void esfq_link(struct esfq_sched_data *q, esfq_index x) -+{ -+ esfq_index p, n; -+ int d = q->qs[x].qlen + q->depth; -+ -+ p = d; -+ n = q->dep[d].next; -+ q->dep[x].next = n; -+ q->dep[x].prev = p; -+ q->dep[p].next = q->dep[n].prev = x; -+} -+ -+static inline void esfq_dec(struct esfq_sched_data *q, esfq_index x) -+{ -+ esfq_index p, n; -+ -+ n = q->dep[x].next; -+ p = q->dep[x].prev; -+ q->dep[p].next = n; -+ q->dep[n].prev = p; -+ -+ if (n == p && q->max_depth == q->qs[x].qlen + 1) -+ q->max_depth--; -+ -+ esfq_link(q, x); -+} -+ -+static inline void esfq_inc(struct esfq_sched_data *q, esfq_index x) -+{ -+ esfq_index p, n; -+ int d; -+ -+ n = q->dep[x].next; -+ p = q->dep[x].prev; -+ q->dep[p].next = n; -+ q->dep[n].prev = p; -+ d = q->qs[x].qlen; -+ if (q->max_depth < d) -+ q->max_depth = d; -+ -+ esfq_link(q, x); -+} -+ -+static unsigned int esfq_drop(struct Qdisc *sch) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ esfq_index d = q->max_depth; -+ struct sk_buff *skb; -+ unsigned int len; -+ -+ /* Queue is full! Find the longest slot and -+ drop a packet from it */ -+ -+ if (d > 1) { -+ esfq_index x = q->dep[d+q->depth].next; -+ skb = q->qs[x].prev; -+ len = skb->len; -+ __skb_unlink(skb, &q->qs[x]); -+ kfree_skb(skb); -+ esfq_dec(q, x); -+ sch->q.qlen--; -+ sch->qstats.drops++; -+ sch->qstats.backlog -= len; -+ return len; -+ } -+ -+ if (d == 1) { -+ /* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */ -+ d = q->next[q->tail]; -+ q->next[q->tail] = q->next[d]; -+ q->allot[q->next[d]] += q->quantum; -+ skb = q->qs[d].prev; -+ len = skb->len; -+ __skb_unlink(skb, &q->qs[d]); -+ kfree_skb(skb); -+ esfq_dec(q, d); -+ sch->q.qlen--; -+ q->ht[q->hash[d]] = q->depth; -+ sch->qstats.drops++; -+ sch->qstats.backlog -= len; -+ return len; -+ } -+ -+ return 0; -+} -+ -+static void esfq_q_enqueue(struct sk_buff *skb, struct esfq_sched_data *q, unsigned int end) -+{ -+ unsigned hash = esfq_hash(q, skb); -+ unsigned depth = q->depth; -+ esfq_index x; -+ -+ x = q->ht[hash]; -+ if (x == depth) { -+ q->ht[hash] = x = q->dep[depth].next; -+ q->hash[x] = hash; -+ } -+ -+ if (end == ESFQ_TAIL) -+ __skb_queue_tail(&q->qs[x], skb); -+ else -+ __skb_queue_head(&q->qs[x], skb); -+ -+ esfq_inc(q, x); -+ if (q->qs[x].qlen == 1) { /* The flow is new */ -+ if (q->tail == depth) { /* It is the first flow */ -+ q->tail = x; -+ q->next[x] = x; -+ q->allot[x] = q->quantum; -+ } else { -+ q->next[x] = q->next[q->tail]; -+ q->next[q->tail] = x; -+ q->tail = x; -+ } -+ } -+} -+ -+static int esfq_enqueue(struct sk_buff *skb, struct Qdisc* sch) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ esfq_q_enqueue(skb, q, ESFQ_TAIL); -+ sch->qstats.backlog += skb->len; -+ if (++sch->q.qlen < q->limit-1) { -+ sch->bstats.bytes += skb->len; -+ sch->bstats.packets++; -+ return 0; -+ } -+ -+ sch->qstats.drops++; -+ esfq_drop(sch); -+ return NET_XMIT_CN; -+} -+ -+static struct sk_buff *esfq_peek(struct Qdisc* sch) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ esfq_index a; -+ -+ /* No active slots */ -+ if (q->tail == q->depth) -+ return NULL; -+ -+ a = q->next[q->tail]; -+ return skb_peek(&q->qs[a]); -+} -+ -+static struct sk_buff *esfq_q_dequeue(struct esfq_sched_data *q) -+{ -+ struct sk_buff *skb; -+ unsigned depth = q->depth; -+ esfq_index a, old_a; -+ -+ /* No active slots */ -+ if (q->tail == depth) -+ return NULL; -+ -+ a = old_a = q->next[q->tail]; -+ -+ /* Grab packet */ -+ skb = __skb_dequeue(&q->qs[a]); -+ esfq_dec(q, a); -+ -+ /* Is the slot empty? */ -+ if (q->qs[a].qlen == 0) { -+ q->ht[q->hash[a]] = depth; -+ a = q->next[a]; -+ if (a == old_a) { -+ q->tail = depth; -+ return skb; -+ } -+ q->next[q->tail] = a; -+ q->allot[a] += q->quantum; -+ } else if ((q->allot[a] -= skb->len) <= 0) { -+ q->tail = a; -+ a = q->next[a]; -+ q->allot[a] += q->quantum; -+ } -+ -+ return skb; -+} -+ -+static struct sk_buff *esfq_dequeue(struct Qdisc* sch) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ struct sk_buff *skb; -+ -+ skb = esfq_q_dequeue(q); -+ if (skb == NULL) -+ return NULL; -+ sch->q.qlen--; -+ sch->qstats.backlog -= skb->len; -+ return skb; -+} -+ -+static void esfq_q_destroy(struct esfq_sched_data *q) -+{ -+ del_timer(&q->perturb_timer); -+ if(q->ht) -+ kfree(q->ht); -+ if(q->dep) -+ kfree(q->dep); -+ if(q->next) -+ kfree(q->next); -+ if(q->allot) -+ kfree(q->allot); -+ if(q->hash) -+ kfree(q->hash); -+ if(q->qs) -+ kfree(q->qs); -+} -+ -+static void esfq_destroy(struct Qdisc *sch) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ esfq_q_destroy(q); -+} -+ -+ -+static void esfq_reset(struct Qdisc* sch) -+{ -+ struct sk_buff *skb; -+ -+ while ((skb = esfq_dequeue(sch)) != NULL) -+ kfree_skb(skb); -+} -+ -+static void esfq_perturbation(unsigned long arg) -+{ -+ struct Qdisc *sch = (struct Qdisc*)arg; -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ -+ q->perturbation = net_random()&0x1F; -+ -+ if (q->perturb_period) { -+ q->perturb_timer.expires = jiffies + q->perturb_period; -+ add_timer(&q->perturb_timer); -+ } -+} -+ -+static unsigned int esfq_check_hash(unsigned int kind) -+{ -+ switch (kind) { -+ case TCA_SFQ_HASH_CTORIGDST: -+ case TCA_SFQ_HASH_CTORIGSRC: -+ case TCA_SFQ_HASH_CTREPLDST: -+ case TCA_SFQ_HASH_CTREPLSRC: -+ case TCA_SFQ_HASH_CTNATCHG: -+#ifndef CONFIG_NET_SCH_ESFQ_NFCT -+ { -+ if (net_ratelimit()) -+ printk(KERN_WARNING "ESFQ: Conntrack hash types disabled in kernel config. Falling back to classic.\n"); -+ return TCA_SFQ_HASH_CLASSIC; -+ } -+#endif -+ case TCA_SFQ_HASH_CLASSIC: -+ case TCA_SFQ_HASH_DST: -+ case TCA_SFQ_HASH_SRC: -+ case TCA_SFQ_HASH_FWMARK: -+ return kind; -+ default: -+ { -+ if (net_ratelimit()) -+ printk(KERN_WARNING "ESFQ: Unknown hash type. Falling back to classic.\n"); -+ return TCA_SFQ_HASH_CLASSIC; -+ } -+ } -+} -+ -+static int esfq_q_init(struct esfq_sched_data *q, struct nlattr *opt) -+{ -+ struct tc_esfq_qopt *ctl = nla_data(opt); -+ esfq_index p = ~0U/2; -+ int i; -+ -+ if (opt && opt->nla_len < nla_attr_size(sizeof(*ctl))) -+ return -EINVAL; -+ -+ q->perturbation = 0; -+ q->hash_kind = TCA_SFQ_HASH_CLASSIC; -+ q->max_depth = 0; -+ if (opt == NULL) { -+ q->perturb_period = 0; -+ q->hash_divisor = 1024; -+ q->tail = q->limit = q->depth = 128; -+ -+ } else { -+ struct tc_esfq_qopt *ctl = nla_data(opt); -+ if (ctl->quantum) -+ q->quantum = ctl->quantum; -+ q->perturb_period = ctl->perturb_period*HZ; -+ q->hash_divisor = ctl->divisor ? : 1024; -+ q->tail = q->limit = q->depth = ctl->flows ? : 128; -+ -+ if ( q->depth > p - 1 ) -+ return -EINVAL; -+ -+ if (ctl->limit) -+ q->limit = min_t(u32, ctl->limit, q->depth); -+ -+ if (ctl->hash_kind) { -+ q->hash_kind = esfq_check_hash(ctl->hash_kind); -+ } -+ } -+ -+ q->ht = kmalloc(q->hash_divisor*sizeof(esfq_index), GFP_KERNEL); -+ if (!q->ht) -+ goto err_case; -+ q->dep = kmalloc((1+q->depth*2)*sizeof(struct esfq_head), GFP_KERNEL); -+ if (!q->dep) -+ goto err_case; -+ q->next = kmalloc(q->depth*sizeof(esfq_index), GFP_KERNEL); -+ if (!q->next) -+ goto err_case; -+ q->allot = kmalloc(q->depth*sizeof(short), GFP_KERNEL); -+ if (!q->allot) -+ goto err_case; -+ q->hash = kmalloc(q->depth*sizeof(unsigned short), GFP_KERNEL); -+ if (!q->hash) -+ goto err_case; -+ q->qs = kmalloc(q->depth*sizeof(struct sk_buff_head), GFP_KERNEL); -+ if (!q->qs) -+ goto err_case; -+ -+ for (i=0; i< q->hash_divisor; i++) -+ q->ht[i] = q->depth; -+ for (i=0; idepth; i++) { -+ skb_queue_head_init(&q->qs[i]); -+ q->dep[i+q->depth].next = i+q->depth; -+ q->dep[i+q->depth].prev = i+q->depth; -+ } -+ -+ for (i=0; idepth; i++) -+ esfq_link(q, i); -+ return 0; -+err_case: -+ esfq_q_destroy(q); -+ return -ENOBUFS; -+} -+ -+static int esfq_init(struct Qdisc *sch, struct nlattr *opt) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ int err; -+ -+ q->quantum = psched_mtu(qdisc_dev(sch)); /* default */ -+ if ((err = esfq_q_init(q, opt))) -+ return err; -+ -+ init_timer(&q->perturb_timer); -+ q->perturb_timer.data = (unsigned long)sch; -+ q->perturb_timer.function = esfq_perturbation; -+ if (q->perturb_period) { -+ q->perturb_timer.expires = jiffies + q->perturb_period; -+ add_timer(&q->perturb_timer); -+ } -+ -+ return 0; -+} -+ -+static int esfq_change(struct Qdisc *sch, struct nlattr *opt) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ struct esfq_sched_data new; -+ struct sk_buff *skb; -+ int err; -+ -+ /* set up new queue */ -+ memset(&new, 0, sizeof(struct esfq_sched_data)); -+ new.quantum = psched_mtu(qdisc_dev(sch)); /* default */ -+ if ((err = esfq_q_init(&new, opt))) -+ return err; -+ -+ /* copy all packets from the old queue to the new queue */ -+ sch_tree_lock(sch); -+ while ((skb = esfq_q_dequeue(q)) != NULL) -+ esfq_q_enqueue(skb, &new, ESFQ_TAIL); -+ -+ /* clean up the old queue */ -+ esfq_q_destroy(q); -+ -+ /* copy elements of the new queue into the old queue */ -+ q->perturb_period = new.perturb_period; -+ q->quantum = new.quantum; -+ q->limit = new.limit; -+ q->depth = new.depth; -+ q->hash_divisor = new.hash_divisor; -+ q->hash_kind = new.hash_kind; -+ q->tail = new.tail; -+ q->max_depth = new.max_depth; -+ q->ht = new.ht; -+ q->dep = new.dep; -+ q->next = new.next; -+ q->allot = new.allot; -+ q->hash = new.hash; -+ q->qs = new.qs; -+ -+ /* finish up */ -+ if (q->perturb_period) { -+ q->perturb_timer.expires = jiffies + q->perturb_period; -+ add_timer(&q->perturb_timer); -+ } else { -+ q->perturbation = 0; -+ } -+ sch_tree_unlock(sch); -+ return 0; -+} -+ -+static int esfq_dump(struct Qdisc *sch, struct sk_buff *skb) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ unsigned char *b = skb_tail_pointer(skb); -+ struct tc_esfq_qopt opt; -+ -+ opt.quantum = q->quantum; -+ opt.perturb_period = q->perturb_period/HZ; -+ -+ opt.limit = q->limit; -+ opt.divisor = q->hash_divisor; -+ opt.flows = q->depth; -+ opt.hash_kind = q->hash_kind; -+ -+ NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt); -+ -+ return skb->len; -+ -+nla_put_failure: -+ nlmsg_trim(skb, b); -+ return -1; -+} -+ -+static struct Qdisc_ops esfq_qdisc_ops = -+{ -+ .next = NULL, -+ .cl_ops = NULL, -+ .id = "esfq", -+ .priv_size = sizeof(struct esfq_sched_data), -+ .enqueue = esfq_enqueue, -+ .dequeue = esfq_dequeue, -+ .peek = esfq_peek, -+ .drop = esfq_drop, -+ .init = esfq_init, -+ .reset = esfq_reset, -+ .destroy = esfq_destroy, -+ .change = esfq_change, -+ .dump = esfq_dump, -+ .owner = THIS_MODULE, -+}; -+ -+static int __init esfq_module_init(void) -+{ -+ return register_qdisc(&esfq_qdisc_ops); -+} -+static void __exit esfq_module_exit(void) -+{ -+ unregister_qdisc(&esfq_qdisc_ops); -+} -+module_init(esfq_module_init) -+module_exit(esfq_module_exit) -+MODULE_LICENSE("GPL"); diff --git a/target/linux/generic/patches-3.3/621-sched_act_connmark.patch b/target/linux/generic/patches-3.3/621-sched_act_connmark.patch deleted file mode 100644 index b6adce1feb..0000000000 --- a/target/linux/generic/patches-3.3/621-sched_act_connmark.patch +++ /dev/null @@ -1,172 +0,0 @@ ---- /dev/null -+++ b/net/sched/act_connmark.c -@@ -0,0 +1,137 @@ -+/* -+ * Copyright (c) 2011 Felix Fietkau -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms and conditions of the GNU General Public License, -+ * version 2, as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple -+ * Place - Suite 330, Boston, MA 02111-1307 USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#define TCA_ACT_CONNMARK 20 -+ -+#define CONNMARK_TAB_MASK 3 -+static struct tcf_common *tcf_connmark_ht[CONNMARK_TAB_MASK + 1]; -+static u32 connmark_idx_gen; -+static DEFINE_RWLOCK(connmark_lock); -+ -+static struct tcf_hashinfo connmark_hash_info = { -+ .htab = tcf_connmark_ht, -+ .hmask = CONNMARK_TAB_MASK, -+ .lock = &connmark_lock, -+}; -+ -+static int tcf_connmark(struct sk_buff *skb, const struct tc_action *a, -+ struct tcf_result *res) -+{ -+ struct nf_conn *c; -+ enum ip_conntrack_info ctinfo; -+ int proto; -+ int r; -+ -+ if (skb->protocol == htons(ETH_P_IP)) { -+ if (skb->len < sizeof(struct iphdr)) -+ goto out; -+ proto = PF_INET; -+ } else if (skb->protocol == htons(ETH_P_IPV6)) { -+ if (skb->len < sizeof(struct ipv6hdr)) -+ goto out; -+ proto = PF_INET6; -+ } else -+ goto out; -+ -+ r = nf_conntrack_in(dev_net(skb->dev), proto, NF_INET_PRE_ROUTING, skb); -+ if (r != NF_ACCEPT) -+ goto out; -+ -+ c = nf_ct_get(skb, &ctinfo); -+ if (!c) -+ goto out; -+ -+ skb->mark = c->mark; -+ nf_conntrack_put(skb->nfct); -+ skb->nfct = NULL; -+ -+out: -+ return TC_ACT_PIPE; -+} -+ -+static int tcf_connmark_init(struct nlattr *nla, struct nlattr *est, -+ struct tc_action *a, int ovr, int bind) -+{ -+ struct tcf_common *pc; -+ -+ pc = tcf_hash_create(0, est, a, sizeof(*pc), bind, -+ &connmark_idx_gen, &connmark_hash_info); -+ if (IS_ERR(pc)) -+ return PTR_ERR(pc); -+ -+ tcf_hash_insert(pc, &connmark_hash_info); -+ -+ return ACT_P_CREATED; -+} -+ -+static inline int tcf_connmark_cleanup(struct tc_action *a, int bind) -+{ -+ if (a->priv) -+ return tcf_hash_release(a->priv, bind, &connmark_hash_info); -+ return 0; -+} -+ -+static inline int tcf_connmark_dump(struct sk_buff *skb, struct tc_action *a, -+ int bind, int ref) -+{ -+ return skb->len; -+} -+ -+static struct tc_action_ops act_connmark_ops = { -+ .kind = "connmark", -+ .hinfo = &connmark_hash_info, -+ .type = TCA_ACT_CONNMARK, -+ .capab = TCA_CAP_NONE, -+ .owner = THIS_MODULE, -+ .act = tcf_connmark, -+ .dump = tcf_connmark_dump, -+ .cleanup = tcf_connmark_cleanup, -+ .init = tcf_connmark_init, -+ .walk = tcf_generic_walker, -+}; -+ -+MODULE_AUTHOR("Felix Fietkau "); -+MODULE_DESCRIPTION("Connection tracking mark restoring"); -+MODULE_LICENSE("GPL"); -+ -+static int __init connmark_init_module(void) -+{ -+ return tcf_register_action(&act_connmark_ops); -+} -+ -+static void __exit connmark_cleanup_module(void) -+{ -+ tcf_unregister_action(&act_connmark_ops); -+} -+ -+module_init(connmark_init_module); -+module_exit(connmark_cleanup_module); ---- a/net/sched/Kconfig -+++ b/net/sched/Kconfig -@@ -624,6 +624,19 @@ config NET_ACT_CSUM - To compile this code as a module, choose M here: the - module will be called act_csum. - -+config NET_ACT_CONNMARK -+ tristate "Connection Tracking Marking" -+ depends on NET_CLS_ACT -+ depends on NF_CONNTRACK -+ depends on NF_CONNTRACK_MARK -+ ---help--- -+ Say Y here to restore the connmark from a scheduler action -+ -+ If unsure, say N. -+ -+ To compile this code as a module, choose M here: the -+ module will be called act_connmark. -+ - config NET_CLS_IND - bool "Incoming device classification" - depends on NET_CLS_U32 || NET_CLS_FW ---- a/net/sched/Makefile -+++ b/net/sched/Makefile -@@ -16,6 +16,7 @@ obj-$(CONFIG_NET_ACT_PEDIT) += act_pedit - obj-$(CONFIG_NET_ACT_SIMP) += act_simple.o - obj-$(CONFIG_NET_ACT_SKBEDIT) += act_skbedit.o - obj-$(CONFIG_NET_ACT_CSUM) += act_csum.o -+obj-$(CONFIG_NET_ACT_CONNMARK) += act_connmark.o - obj-$(CONFIG_NET_SCH_FIFO) += sch_fifo.o - obj-$(CONFIG_NET_SCH_CBQ) += sch_cbq.o - obj-$(CONFIG_NET_SCH_HTB) += sch_htb.o diff --git a/target/linux/generic/patches-3.3/630-packet_socket_type.patch b/target/linux/generic/patches-3.3/630-packet_socket_type.patch deleted file mode 100644 index bcb399141f..0000000000 --- a/target/linux/generic/patches-3.3/630-packet_socket_type.patch +++ /dev/null @@ -1,132 +0,0 @@ -This patch allows the user to specify desired packet types (outgoing, -broadcast, unicast, etc.) on packet sockets via setsockopt. -This can reduce the load in situations where only a limited number -of packet types are necessary - -Signed-off-by: Felix Fietkau - ---- a/include/linux/if_packet.h -+++ b/include/linux/if_packet.h -@@ -29,6 +29,8 @@ struct sockaddr_ll { - /* These ones are invisible by user level */ - #define PACKET_LOOPBACK 5 /* MC/BRD frame looped back */ - #define PACKET_FASTROUTE 6 /* Fastrouted frame */ -+#define PACKET_MASK_ANY 0xffffffff /* mask for packet type bits */ -+ - - /* Packet socket options */ - -@@ -50,6 +52,7 @@ struct sockaddr_ll { - #define PACKET_TX_TIMESTAMP 16 - #define PACKET_TIMESTAMP 17 - #define PACKET_FANOUT 18 -+#define PACKET_RECV_TYPE 19 - - #define PACKET_FANOUT_HASH 0 - #define PACKET_FANOUT_LB 1 ---- a/net/packet/af_packet.c -+++ b/net/packet/af_packet.c -@@ -296,6 +296,7 @@ struct packet_sock { - unsigned int tp_loss:1; - unsigned int tp_tstamp; - struct packet_type prot_hook ____cacheline_aligned_in_smp; -+ unsigned int pkt_type; - }; - - #define PACKET_FANOUT_MAX 256 -@@ -1383,6 +1384,7 @@ static int packet_rcv_spkt(struct sk_buf - { - struct sock *sk; - struct sockaddr_pkt *spkt; -+ struct packet_sock *po; - - /* - * When we registered the protocol we saved the socket in the data -@@ -1390,6 +1392,7 @@ static int packet_rcv_spkt(struct sk_buf - */ - - sk = pt->af_packet_priv; -+ po = pkt_sk(sk); - - /* - * Yank back the headers [hope the device set this -@@ -1402,7 +1405,7 @@ static int packet_rcv_spkt(struct sk_buf - * so that this procedure is noop. - */ - -- if (skb->pkt_type == PACKET_LOOPBACK) -+ if (!(po->pkt_type & (1 << skb->pkt_type))) - goto out; - - if (!net_eq(dev_net(dev), sock_net(sk))) -@@ -1596,12 +1599,12 @@ static int packet_rcv(struct sk_buff *sk - int skb_len = skb->len; - unsigned int snaplen, res; - -- if (skb->pkt_type == PACKET_LOOPBACK) -- goto drop; -- - sk = pt->af_packet_priv; - po = pkt_sk(sk); - -+ if (!(po->pkt_type & (1 << skb->pkt_type))) -+ goto drop; -+ - if (!net_eq(dev_net(dev), sock_net(sk))) - goto drop; - -@@ -1720,12 +1723,12 @@ static int tpacket_rcv(struct sk_buff *s - struct timespec ts; - struct skb_shared_hwtstamps *shhwtstamps = skb_hwtstamps(skb); - -- if (skb->pkt_type == PACKET_LOOPBACK) -- goto drop; -- - sk = pt->af_packet_priv; - po = pkt_sk(sk); - -+ if (!(po->pkt_type & (1 << skb->pkt_type))) -+ goto drop; -+ - if (!net_eq(dev_net(dev), sock_net(sk))) - goto drop; - -@@ -2595,6 +2598,7 @@ static int packet_create(struct net *net - spin_lock_init(&po->bind_lock); - mutex_init(&po->pg_vec_lock); - po->prot_hook.func = packet_rcv; -+ po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK); - - if (sock->type == SOCK_PACKET) - po->prot_hook.func = packet_rcv_spkt; -@@ -3192,6 +3196,16 @@ packet_setsockopt(struct socket *sock, i - - return fanout_add(sk, val & 0xffff, val >> 16); - } -+ case PACKET_RECV_TYPE: -+ { -+ unsigned int val; -+ if (optlen != sizeof(val)) -+ return -EINVAL; -+ if (copy_from_user(&val, optval, sizeof(val))) -+ return -EFAULT; -+ po->pkt_type = val & ~BIT(PACKET_LOOPBACK); -+ return 0; -+ } - default: - return -ENOPROTOOPT; - } -@@ -3262,6 +3276,13 @@ static int packet_getsockopt(struct sock - - data = &val; - break; -+ case PACKET_RECV_TYPE: -+ if (len > sizeof(unsigned int)) -+ len = sizeof(unsigned int); -+ val = po->pkt_type; -+ -+ data = &val; -+ break; - case PACKET_VERSION: - if (len > sizeof(int)) - len = sizeof(int); diff --git a/target/linux/generic/patches-3.3/640-bridge_no_eap_forward.patch b/target/linux/generic/patches-3.3/640-bridge_no_eap_forward.patch deleted file mode 100644 index bbdb3bf1dd..0000000000 --- a/target/linux/generic/patches-3.3/640-bridge_no_eap_forward.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/net/bridge/br_input.c -+++ b/net/bridge/br_input.c -@@ -78,7 +78,11 @@ int br_handle_frame_finish(struct sk_buf - - dst = NULL; - -- if (is_broadcast_ether_addr(dest)) -+ if (skb->protocol == htons(ETH_P_PAE)) { -+ skb2 = skb; -+ /* Do not forward 802.1x/EAP frames */ -+ skb = NULL; -+ } else if (is_broadcast_ether_addr(dest)) - skb2 = skb; - else if (is_multicast_ether_addr(dest)) { - mdst = br_mdb_get(br, skb); diff --git a/target/linux/generic/patches-3.3/641-bridge_always_accept_eap.patch b/target/linux/generic/patches-3.3/641-bridge_always_accept_eap.patch deleted file mode 100644 index e04199b301..0000000000 --- a/target/linux/generic/patches-3.3/641-bridge_always_accept_eap.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/net/bridge/br_input.c -+++ b/net/bridge/br_input.c -@@ -65,7 +65,7 @@ int br_handle_frame_finish(struct sk_buf - br_multicast_rcv(br, p, skb)) - goto drop; - -- if (p->state == BR_STATE_LEARNING) -+ if ((p->state == BR_STATE_LEARNING) && skb->protocol != htons(ETH_P_PAE)) - goto drop; - - BR_INPUT_SKB_CB(skb)->brdev = br->dev; diff --git a/target/linux/generic/patches-3.3/642-bridge_port_isolate.patch b/target/linux/generic/patches-3.3/642-bridge_port_isolate.patch deleted file mode 100644 index 68434bfc29..0000000000 --- a/target/linux/generic/patches-3.3/642-bridge_port_isolate.patch +++ /dev/null @@ -1,103 +0,0 @@ ---- a/net/bridge/br_private.h -+++ b/net/bridge/br_private.h -@@ -135,6 +135,7 @@ struct net_bridge_port - - unsigned long flags; - #define BR_HAIRPIN_MODE 0x00000001 -+#define BR_ISOLATE_MODE 0x00000002 - - #ifdef CONFIG_BRIDGE_IGMP_SNOOPING - u32 multicast_startup_queries_sent; ---- a/net/bridge/br_sysfs_if.c -+++ b/net/bridge/br_sysfs_if.c -@@ -149,6 +149,22 @@ static int store_hairpin_mode(struct net - static BRPORT_ATTR(hairpin_mode, S_IRUGO | S_IWUSR, - show_hairpin_mode, store_hairpin_mode); - -+static ssize_t show_isolate_mode(struct net_bridge_port *p, char *buf) -+{ -+ int isolate_mode = (p->flags & BR_ISOLATE_MODE) ? 1 : 0; -+ return sprintf(buf, "%d\n", isolate_mode); -+} -+static ssize_t store_isolate_mode(struct net_bridge_port *p, unsigned long v) -+{ -+ if (v) -+ p->flags |= BR_ISOLATE_MODE; -+ else -+ p->flags &= ~BR_ISOLATE_MODE; -+ return 0; -+} -+static BRPORT_ATTR(isolate_mode, S_IRUGO | S_IWUSR, -+ show_isolate_mode, store_isolate_mode); -+ - #ifdef CONFIG_BRIDGE_IGMP_SNOOPING - static ssize_t show_multicast_router(struct net_bridge_port *p, char *buf) - { -@@ -181,6 +197,7 @@ static struct brport_attribute *brport_a - &brport_attr_hold_timer, - &brport_attr_flush, - &brport_attr_hairpin_mode, -+ &brport_attr_isolate_mode, - #ifdef CONFIG_BRIDGE_IGMP_SNOOPING - &brport_attr_multicast_router, - #endif ---- a/net/bridge/br_input.c -+++ b/net/bridge/br_input.c -@@ -98,7 +98,8 @@ int br_handle_frame_finish(struct sk_buf - skb2 = skb; - - br->dev->stats.multicast++; -- } else if ((dst = __br_fdb_get(br, dest)) && dst->is_local) { -+ } else if ((p->flags & BR_ISOLATE_MODE) || -+ ((dst = __br_fdb_get(br, dest)) && dst->is_local)) { - skb2 = skb; - /* Do not forward the packet since it's local. */ - skb = NULL; ---- a/net/bridge/br_forward.c -+++ b/net/bridge/br_forward.c -@@ -109,7 +109,7 @@ void br_deliver(const struct net_bridge_ - /* called with rcu_read_lock */ - void br_forward(const struct net_bridge_port *to, struct sk_buff *skb, struct sk_buff *skb0) - { -- if (should_deliver(to, skb)) { -+ if (should_deliver(to, skb) && !(to->flags & BR_ISOLATE_MODE)) { - if (skb0) - deliver_clone(to, skb, __br_forward); - else -@@ -164,7 +164,8 @@ out: - static void br_flood(struct net_bridge *br, struct sk_buff *skb, - struct sk_buff *skb0, - void (*__packet_hook)(const struct net_bridge_port *p, -- struct sk_buff *skb)) -+ struct sk_buff *skb), -+ bool forward) - { - struct net_bridge_port *p; - struct net_bridge_port *prev; -@@ -172,6 +173,9 @@ static void br_flood(struct net_bridge * - prev = NULL; - - list_for_each_entry_rcu(p, &br->port_list, list) { -+ if (forward && (p->flags & BR_ISOLATE_MODE)) -+ continue; -+ - prev = maybe_deliver(prev, p, skb, __packet_hook); - if (IS_ERR(prev)) - goto out; -@@ -195,14 +199,14 @@ out: - /* called with rcu_read_lock */ - void br_flood_deliver(struct net_bridge *br, struct sk_buff *skb) - { -- br_flood(br, skb, NULL, __br_deliver); -+ br_flood(br, skb, NULL, __br_deliver, false); - } - - /* called under bridge lock */ - void br_flood_forward(struct net_bridge *br, struct sk_buff *skb, - struct sk_buff *skb2) - { -- br_flood(br, skb, skb2, __br_forward); -+ br_flood(br, skb, skb2, __br_forward, true); - } - - #ifdef CONFIG_BRIDGE_IGMP_SNOOPING diff --git a/target/linux/generic/patches-3.3/643-bridge_remove_ipv6_dependency.patch b/target/linux/generic/patches-3.3/643-bridge_remove_ipv6_dependency.patch deleted file mode 100644 index 301b6be441..0000000000 --- a/target/linux/generic/patches-3.3/643-bridge_remove_ipv6_dependency.patch +++ /dev/null @@ -1,107 +0,0 @@ ---- a/include/net/addrconf.h -+++ b/include/net/addrconf.h -@@ -91,6 +91,12 @@ extern void addrconf_join_solict(struc - extern void addrconf_leave_solict(struct inet6_dev *idev, - const struct in6_addr *addr); - -+extern int (*ipv6_dev_get_saddr_hook)(struct net *net, -+ struct net_device *dev, -+ const struct in6_addr *daddr, -+ unsigned int srcprefs, -+ struct in6_addr *saddr); -+ - static inline unsigned long addrconf_timeout_fixup(u32 timeout, - unsigned unit) - { ---- a/net/bridge/Kconfig -+++ b/net/bridge/Kconfig -@@ -6,7 +6,6 @@ config BRIDGE - tristate "802.1d Ethernet Bridging" - select LLC - select STP -- depends on IPV6 || IPV6=n - ---help--- - If you say Y here, then your Linux box will be able to act as an - Ethernet bridge, which means that the different Ethernet segments it ---- a/net/ipv6/Makefile -+++ b/net/ipv6/Makefile -@@ -40,3 +40,4 @@ obj-$(CONFIG_IPV6_TUNNEL) += ip6_tunnel. - obj-y += addrconf_core.o exthdrs_core.o - - obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o -+obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_stubs.o ---- a/net/ipv6/addrconf.c -+++ b/net/ipv6/addrconf.c -@@ -1103,7 +1103,7 @@ out: - return ret; - } - --int ipv6_dev_get_saddr(struct net *net, struct net_device *dst_dev, -+static int __ipv6_dev_get_saddr(struct net *net, struct net_device *dst_dev, - const struct in6_addr *daddr, unsigned int prefs, - struct in6_addr *saddr) - { -@@ -1228,7 +1228,6 @@ try_nextdev: - in6_ifa_put(hiscore->ifa); - return 0; - } --EXPORT_SYMBOL(ipv6_dev_get_saddr); - - int ipv6_get_lladdr(struct net_device *dev, struct in6_addr *addr, - unsigned char banned_flags) -@@ -4840,6 +4839,9 @@ int __init addrconf_init(void) - - ipv6_addr_label_rtnl_register(); - -+ BUG_ON(ipv6_dev_get_saddr_hook != NULL); -+ rcu_assign_pointer(ipv6_dev_get_saddr_hook, __ipv6_dev_get_saddr); -+ - return 0; - errout: - rtnl_af_unregister(&inet6_ops); -@@ -4858,6 +4860,9 @@ void addrconf_cleanup(void) - struct net_device *dev; - int i; - -+ rcu_assign_pointer(ipv6_dev_get_saddr_hook, NULL); -+ synchronize_rcu(); -+ - unregister_netdevice_notifier(&ipv6_dev_notf); - unregister_pernet_subsys(&addrconf_ops); - ipv6_addr_label_cleanup(); ---- /dev/null -+++ b/net/ipv6/inet6_stubs.c -@@ -0,0 +1,33 @@ -+/* -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+#include -+#include -+ -+int (*ipv6_dev_get_saddr_hook)(struct net *net, struct net_device *dev, -+ const struct in6_addr *daddr, unsigned int srcprefs, -+ struct in6_addr *saddr); -+ -+EXPORT_SYMBOL(ipv6_dev_get_saddr_hook); -+ -+int ipv6_dev_get_saddr(struct net *net, struct net_device *dst_dev, -+ const struct in6_addr *daddr, unsigned int prefs, -+ struct in6_addr *saddr) -+{ -+ int ret = -EADDRNOTAVAIL; -+ typeof(ipv6_dev_get_saddr_hook) dev_get_saddr; -+ -+ rcu_read_lock(); -+ dev_get_saddr = rcu_dereference(ipv6_dev_get_saddr_hook); -+ -+ if (dev_get_saddr) -+ ret = dev_get_saddr(net, dst_dev, daddr, prefs, saddr); -+ -+ rcu_read_unlock(); -+ return ret; -+} -+EXPORT_SYMBOL(ipv6_dev_get_saddr); -+ diff --git a/target/linux/generic/patches-3.3/644-bridge_optimize_netfilter_hooks.patch b/target/linux/generic/patches-3.3/644-bridge_optimize_netfilter_hooks.patch deleted file mode 100644 index dafe420817..0000000000 --- a/target/linux/generic/patches-3.3/644-bridge_optimize_netfilter_hooks.patch +++ /dev/null @@ -1,146 +0,0 @@ ---- a/net/bridge/br_forward.c -+++ b/net/bridge/br_forward.c -@@ -55,7 +55,7 @@ int br_dev_queue_push_xmit(struct sk_buf - - int br_forward_finish(struct sk_buff *skb) - { -- return NF_HOOK(NFPROTO_BRIDGE, NF_BR_POST_ROUTING, skb, NULL, skb->dev, -+ return BR_HOOK(NFPROTO_BRIDGE, NF_BR_POST_ROUTING, skb, NULL, skb->dev, - br_dev_queue_push_xmit); - - } -@@ -74,7 +74,7 @@ static void __br_deliver(const struct ne - return; - } - -- NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev, -+ BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev, - br_forward_finish); - } - -@@ -91,7 +91,7 @@ static void __br_forward(const struct ne - skb->dev = to->dev; - skb_forward_csum(skb); - -- NF_HOOK(NFPROTO_BRIDGE, NF_BR_FORWARD, skb, indev, skb->dev, -+ BR_HOOK(NFPROTO_BRIDGE, NF_BR_FORWARD, skb, indev, skb->dev, - br_forward_finish); - } - ---- a/net/bridge/br_input.c -+++ b/net/bridge/br_input.c -@@ -40,7 +40,7 @@ static int br_pass_frame_up(struct sk_bu - indev = skb->dev; - skb->dev = brdev; - -- return NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN, skb, indev, NULL, -+ return BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN, skb, indev, NULL, - netif_receive_skb); - } - -@@ -199,7 +199,7 @@ rx_handler_result_t br_handle_frame(stru - } - - /* Deliver packet to local host only */ -- if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev, -+ if (BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev, - NULL, br_handle_local_finish)) { - return RX_HANDLER_CONSUMED; /* consumed by filter */ - } else { -@@ -224,7 +224,7 @@ forward: - if (!compare_ether_addr(p->br->dev->dev_addr, dest)) - skb->pkt_type = PACKET_HOST; - -- NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL, -+ BR_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL, - br_handle_frame_finish); - break; - default: ---- a/net/bridge/br_multicast.c -+++ b/net/bridge/br_multicast.c -@@ -753,7 +753,7 @@ static void __br_multicast_send_query(st - if (port) { - __skb_push(skb, sizeof(struct ethhdr)); - skb->dev = port->dev; -- NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev, -+ BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev, - dev_queue_xmit); - } else - netif_rx(skb); ---- a/net/bridge/br_netfilter.c -+++ b/net/bridge/br_netfilter.c -@@ -71,6 +71,15 @@ static int brnf_filter_pppoe_tagged __re - #define IS_ARP(skb) \ - (!vlan_tx_tag_present(skb) && skb->protocol == htons(ETH_P_ARP)) - -+int brnf_call_ebtables __read_mostly = 0; -+EXPORT_SYMBOL_GPL(brnf_call_ebtables); -+ -+bool br_netfilter_run_hooks(void) -+{ -+ return brnf_call_iptables | brnf_call_ip6tables | brnf_call_arptables | -+ brnf_call_ebtables; -+} -+ - static inline __be16 vlan_proto(const struct sk_buff *skb) - { - if (vlan_tx_tag_present(skb)) ---- a/net/bridge/br_private.h -+++ b/net/bridge/br_private.h -@@ -486,15 +486,29 @@ static inline bool br_multicast_is_route - - /* br_netfilter.c */ - #ifdef CONFIG_BRIDGE_NETFILTER -+extern int brnf_call_ebtables; - extern int br_netfilter_init(void); - extern void br_netfilter_fini(void); - extern void br_netfilter_rtable_init(struct net_bridge *); -+extern bool br_netfilter_run_hooks(void); - #else - #define br_netfilter_init() (0) - #define br_netfilter_fini() do { } while(0) - #define br_netfilter_rtable_init(x) -+#define br_netfilter_run_hooks() false - #endif - -+static inline int -+BR_HOOK(uint8_t pf, unsigned int hook, struct sk_buff *skb, -+ struct net_device *in, struct net_device *out, -+ int (*okfn)(struct sk_buff *)) -+{ -+ if (!br_netfilter_run_hooks()) -+ return okfn(skb); -+ -+ return NF_HOOK(pf, hook, skb, in, out, okfn); -+} -+ - /* br_stp.c */ - extern void br_log_state(const struct net_bridge_port *p); - extern struct net_bridge_port *br_get_port(struct net_bridge *br, ---- a/net/bridge/br_stp_bpdu.c -+++ b/net/bridge/br_stp_bpdu.c -@@ -52,7 +52,7 @@ static void br_send_bpdu(struct net_brid - - skb_reset_mac_header(skb); - -- NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev, -+ BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev, - dev_queue_xmit); - } - ---- a/net/bridge/netfilter/ebtables.c -+++ b/net/bridge/netfilter/ebtables.c -@@ -2403,11 +2403,13 @@ static int __init ebtables_init(void) - } - - printk(KERN_INFO "Ebtables v2.0 registered\n"); -+ brnf_call_ebtables = 1; - return 0; - } - - static void __exit ebtables_fini(void) - { -+ brnf_call_ebtables = 0; - nf_unregister_sockopt(&ebt_sockopts); - xt_unregister_target(&ebt_standard_target); - printk(KERN_INFO "Ebtables v2.0 unregistered\n"); diff --git a/target/linux/generic/patches-3.3/650-pppoe_header_pad.patch b/target/linux/generic/patches-3.3/650-pppoe_header_pad.patch deleted file mode 100644 index 5862dc113e..0000000000 --- a/target/linux/generic/patches-3.3/650-pppoe_header_pad.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/net/ppp/pppoe.c -+++ b/drivers/net/ppp/pppoe.c -@@ -856,7 +856,7 @@ static int pppoe_sendmsg(struct kiocb *i - goto end; - - -- skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32, -+ skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32 + NET_SKB_PAD, - 0, GFP_KERNEL); - if (!skb) { - error = -ENOMEM; -@@ -864,7 +864,7 @@ static int pppoe_sendmsg(struct kiocb *i - } - - /* Reserve space for headers. */ -- skb_reserve(skb, dev->hard_header_len); -+ skb_reserve(skb, dev->hard_header_len + NET_SKB_PAD); - skb_reset_network_header(skb); - - skb->dev = dev; diff --git a/target/linux/generic/patches-3.3/651-wireless_mesh_header.patch b/target/linux/generic/patches-3.3/651-wireless_mesh_header.patch deleted file mode 100644 index 5c83d19485..0000000000 --- a/target/linux/generic/patches-3.3/651-wireless_mesh_header.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/include/linux/netdevice.h -+++ b/include/linux/netdevice.h -@@ -145,7 +145,7 @@ static inline bool dev_xmit_complete(int - */ - - #if defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25) --# if defined(CONFIG_MAC80211_MESH) -+# if 1 || defined(CONFIG_MAC80211_MESH) - # define LL_MAX_HEADER 128 - # else - # define LL_MAX_HEADER 96 diff --git a/target/linux/generic/patches-3.3/652-atm_header_changes.patch b/target/linux/generic/patches-3.3/652-atm_header_changes.patch deleted file mode 100644 index 238d6f81c4..0000000000 --- a/target/linux/generic/patches-3.3/652-atm_header_changes.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/include/linux/atm.h -+++ b/include/linux/atm.h -@@ -139,6 +139,9 @@ struct atm_trafprm { - int min_pcr; /* minimum PCR in cells per second */ - int max_cdv; /* maximum CDV in microseconds */ - int max_sdu; /* maximum SDU in bytes */ -+ int scr; /* sustained rate in cells per second */ -+ int mbs; /* maximum burst size (MBS) in cells */ -+ int cdv; /* Cell delay varition */ - /* extra params for ABR */ - unsigned int icr; /* Initial Cell Rate (24-bit) */ - unsigned int tbe; /* Transient Buffer Exposure (24-bit) */ diff --git a/target/linux/generic/patches-3.3/653-disable_netlink_trim.patch b/target/linux/generic/patches-3.3/653-disable_netlink_trim.patch deleted file mode 100644 index ffa6502cd6..0000000000 --- a/target/linux/generic/patches-3.3/653-disable_netlink_trim.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/net/netlink/af_netlink.c -+++ b/net/netlink/af_netlink.c -@@ -854,25 +854,7 @@ void netlink_detachskb(struct sock *sk, - - static struct sk_buff *netlink_trim(struct sk_buff *skb, gfp_t allocation) - { -- int delta; -- - skb_orphan(skb); -- -- delta = skb->end - skb->tail; -- if (delta * 2 < skb->truesize) -- return skb; -- -- if (skb_shared(skb)) { -- struct sk_buff *nskb = skb_clone(skb, allocation); -- if (!nskb) -- return skb; -- kfree_skb(skb); -- skb = nskb; -- } -- -- if (!pskb_expand_head(skb, 0, -delta, allocation)) -- skb->truesize -= delta; -- - return skb; - } - diff --git a/target/linux/generic/patches-3.3/654-avoid_skb_cow_realloc.patch b/target/linux/generic/patches-3.3/654-avoid_skb_cow_realloc.patch deleted file mode 100644 index 5b2537127f..0000000000 --- a/target/linux/generic/patches-3.3/654-avoid_skb_cow_realloc.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/include/linux/skbuff.h -+++ b/include/linux/skbuff.h -@@ -1850,12 +1850,15 @@ static inline int skb_clone_writable(con - static inline int __skb_cow(struct sk_buff *skb, unsigned int headroom, - int cloned) - { -+ unsigned int alloc_headroom = headroom; - int delta = 0; - - if (headroom < NET_SKB_PAD) -- headroom = NET_SKB_PAD; -- if (headroom > skb_headroom(skb)) -- delta = headroom - skb_headroom(skb); -+ alloc_headroom = NET_SKB_PAD; -+ if (headroom > skb_headroom(skb) || -+ (cloned && alloc_headroom > skb_headroom(skb))) { -+ delta = alloc_headroom - skb_headroom(skb); -+ } - - if (delta || cloned) - return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD), 0, diff --git a/target/linux/generic/patches-3.3/655-increase_skb_pad.patch b/target/linux/generic/patches-3.3/655-increase_skb_pad.patch deleted file mode 100644 index c4c8c3416e..0000000000 --- a/target/linux/generic/patches-3.3/655-increase_skb_pad.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/include/linux/skbuff.h -+++ b/include/linux/skbuff.h -@@ -1558,7 +1558,7 @@ static inline int pskb_network_may_pull( - * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8) - */ - #ifndef NET_SKB_PAD --#define NET_SKB_PAD max(32, L1_CACHE_BYTES) -+#define NET_SKB_PAD max(64, L1_CACHE_BYTES) - #endif - - extern int ___pskb_trim(struct sk_buff *skb, unsigned int len); diff --git a/target/linux/generic/patches-3.3/700-swconfig.patch b/target/linux/generic/patches-3.3/700-swconfig.patch deleted file mode 100644 index a2009439c7..0000000000 --- a/target/linux/generic/patches-3.3/700-swconfig.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -13,6 +13,16 @@ menuconfig PHYLIB - - if PHYLIB - -+config SWCONFIG -+ tristate "Switch configuration API" -+ ---help--- -+ Switch configuration API using netlink. This allows -+ you to configure the VLAN features of certain switches. -+ -+config SWCONFIG_LEDS -+ bool "Switch LED trigger support" -+ depends on (SWCONFIG && LEDS_TRIGGERS) -+ - comment "MII PHY device drivers" - - config MARVELL_PHY ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -3,6 +3,7 @@ - libphy-objs := phy.o phy_device.o mdio_bus.o - - obj-$(CONFIG_PHYLIB) += libphy.o -+obj-$(CONFIG_SWCONFIG) += swconfig.o - obj-$(CONFIG_MARVELL_PHY) += marvell.o - obj-$(CONFIG_DAVICOM_PHY) += davicom.o - obj-$(CONFIG_CICADA_PHY) += cicada.o ---- a/include/linux/Kbuild -+++ b/include/linux/Kbuild -@@ -354,6 +354,7 @@ header-y += stddef.h - header-y += string.h - header-y += suspend_ioctls.h - header-y += swab.h -+header-y += switch.h - header-y += synclink.h - header-y += sysctl.h - header-y += taskstats.h diff --git a/target/linux/generic/patches-3.3/701-phy_extension.patch b/target/linux/generic/patches-3.3/701-phy_extension.patch deleted file mode 100644 index 201c857d2f..0000000000 --- a/target/linux/generic/patches-3.3/701-phy_extension.patch +++ /dev/null @@ -1,72 +0,0 @@ ---- a/drivers/net/phy/phy.c -+++ b/drivers/net/phy/phy.c -@@ -299,6 +299,50 @@ int phy_ethtool_gset(struct phy_device * - } - EXPORT_SYMBOL(phy_ethtool_gset); - -+int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr) -+{ -+ u32 cmd; -+ int tmp; -+ struct ethtool_cmd ecmd = { ETHTOOL_GSET }; -+ struct ethtool_value edata = { ETHTOOL_GLINK }; -+ -+ if (get_user(cmd, (u32 *) useraddr)) -+ return -EFAULT; -+ -+ switch (cmd) { -+ case ETHTOOL_GSET: -+ phy_ethtool_gset(phydev, &ecmd); -+ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd))) -+ return -EFAULT; -+ return 0; -+ -+ case ETHTOOL_SSET: -+ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd))) -+ return -EFAULT; -+ return phy_ethtool_sset(phydev, &ecmd); -+ -+ case ETHTOOL_NWAY_RST: -+ /* if autoneg is off, it's an error */ -+ tmp = phy_read(phydev, MII_BMCR); -+ if (tmp & BMCR_ANENABLE) { -+ tmp |= (BMCR_ANRESTART); -+ phy_write(phydev, MII_BMCR, tmp); -+ return 0; -+ } -+ return -EINVAL; -+ -+ case ETHTOOL_GLINK: -+ edata.data = (phy_read(phydev, -+ MII_BMSR) & BMSR_LSTATUS) ? 1 : 0; -+ if (copy_to_user(useraddr, &edata, sizeof(edata))) -+ return -EFAULT; -+ return 0; -+ } -+ -+ return -EOPNOTSUPP; -+} -+EXPORT_SYMBOL(phy_ethtool_ioctl); -+ - /** - * phy_mii_ioctl - generic PHY MII ioctl interface - * @phydev: the phy_device struct -@@ -474,7 +518,7 @@ static void phy_force_reduction(struct p - int idx; - - idx = phy_find_setting(phydev->speed, phydev->duplex); -- -+ - idx++; - - idx = phy_find_valid(idx, phydev->supported); ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -515,6 +515,7 @@ void phy_start_machine(struct phy_device - void phy_stop_machine(struct phy_device *phydev); - int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); - int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd); -+int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr); - int phy_mii_ioctl(struct phy_device *phydev, - struct ifreq *ifr, int cmd); - int phy_start_interrupts(struct phy_device *phydev); diff --git a/target/linux/generic/patches-3.3/702-phy_add_aneg_done_function.patch b/target/linux/generic/patches-3.3/702-phy_add_aneg_done_function.patch deleted file mode 100644 index 0649afb10a..0000000000 --- a/target/linux/generic/patches-3.3/702-phy_add_aneg_done_function.patch +++ /dev/null @@ -1,45 +0,0 @@ ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -393,9 +393,18 @@ struct phy_driver { - */ - int (*config_aneg)(struct phy_device *phydev); - -+ /* Determine if autonegotiation is done */ -+ int (*aneg_done)(struct phy_device *phydev); -+ - /* Determines the negotiated speed and duplex */ - int (*read_status)(struct phy_device *phydev); - -+ /* -+ * Update the value in phydev->link to reflect the -+ * current link value -+ */ -+ int (*update_link)(struct phy_device *phydev); -+ - /* Clears any pending interrupts */ - int (*ack_interrupt)(struct phy_device *phydev); - ---- a/drivers/net/phy/phy_device.c -+++ b/drivers/net/phy/phy_device.c -@@ -705,6 +705,9 @@ int genphy_update_link(struct phy_device - { - int status; - -+ if (phydev->drv->update_link) -+ return phydev->drv->update_link(phydev); -+ - /* Do a fake read */ - status = phy_read(phydev, MII_BMSR); - ---- a/drivers/net/phy/phy.c -+++ b/drivers/net/phy/phy.c -@@ -106,6 +106,9 @@ static inline int phy_aneg_done(struct p - { - int retval; - -+ if (phydev->drv->aneg_done) -+ return phydev->drv->aneg_done(phydev); -+ - retval = phy_read(phydev, MII_BMSR); - - return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE); diff --git a/target/linux/generic/patches-3.3/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/patches-3.3/703-phy-add-detach-callback-to-struct-phy_driver.patch deleted file mode 100644 index 8af9a19163..0000000000 --- a/target/linux/generic/patches-3.3/703-phy-add-detach-callback-to-struct-phy_driver.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/net/phy/phy_device.c -+++ b/drivers/net/phy/phy_device.c -@@ -522,6 +522,9 @@ EXPORT_SYMBOL(phy_attach); - */ - void phy_detach(struct phy_device *phydev) - { -+ if (phydev->drv && phydev->drv->detach) -+ phydev->drv->detach(phydev); -+ - phydev->attached_dev->phydev = NULL; - phydev->attached_dev = NULL; - ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -417,6 +417,12 @@ struct phy_driver { - */ - int (*did_interrupt)(struct phy_device *phydev); - -+ /* -+ * Called before an ethernet device is detached -+ * from the PHY. -+ */ -+ void (*detach)(struct phy_device *phydev); -+ - /* Clears up any memory if needed */ - void (*remove)(struct phy_device *phydev); - diff --git a/target/linux/generic/patches-3.3/710-phy-add-mdio_register_board_info.patch b/target/linux/generic/patches-3.3/710-phy-add-mdio_register_board_info.patch deleted file mode 100644 index 5e4039462b..0000000000 --- a/target/linux/generic/patches-3.3/710-phy-add-mdio_register_board_info.patch +++ /dev/null @@ -1,191 +0,0 @@ ---- a/drivers/net/phy/mdio_bus.c -+++ b/drivers/net/phy/mdio_bus.c -@@ -36,6 +36,8 @@ - #include - #include - -+#include "mdio-boardinfo.h" -+ - /** - * mdiobus_alloc_size - allocate a mii_bus structure - * @size: extra amount of memory to allocate for private storage. -@@ -192,15 +194,33 @@ void mdiobus_free(struct mii_bus *bus) - } - EXPORT_SYMBOL(mdiobus_free); - -+static void mdiobus_setup_phydev_from_boardinfo(struct mii_bus *bus, -+ struct phy_device *phydev, -+ struct mdio_board_info *bi) -+{ -+ if (strcmp(bus->id, bi->bus_id) || -+ bi->phy_addr != phydev->addr) -+ return; -+ -+ phydev->dev.platform_data = (void *) bi->platform_data; -+} -+ - struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr) - { - struct phy_device *phydev; -+ struct mdio_board_entry *be; - int err; - - phydev = get_phy_device(bus, addr); - if (IS_ERR(phydev) || phydev == NULL) - return phydev; - -+ mutex_lock(&__mdio_board_lock); -+ list_for_each_entry(be, &__mdio_board_list, list) -+ mdiobus_setup_phydev_from_boardinfo(bus, phydev, -+ &be->board_info); -+ mutex_unlock(&__mdio_board_lock); -+ - err = phy_device_register(phydev); - if (err) { - phy_device_free(phydev); ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -549,4 +549,22 @@ int __init mdio_bus_init(void); - void mdio_bus_exit(void); - - extern struct bus_type mdio_bus_type; -+ -+struct mdio_board_info { -+ const char *bus_id; -+ int phy_addr; -+ -+ const void *platform_data; -+}; -+ -+#ifdef CONFIG_MDIO_BOARDINFO -+int mdiobus_register_board_info(const struct mdio_board_info *info, unsigned n); -+#else -+static inline int -+mdiobus_register_board_info(const struct mdio_board_info *info, unsigned n) -+{ -+ return 0; -+} -+#endif -+ - #endif /* __PHY_H */ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -13,6 +13,10 @@ menuconfig PHYLIB - - if PHYLIB - -+config MDIO_BOARDINFO -+ bool -+ default y -+ - config SWCONFIG - tristate "Switch configuration API" - ---help--- ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -2,6 +2,8 @@ - - libphy-objs := phy.o phy_device.o mdio_bus.o - -+obj-$(CONFIG_MDIO_BOARDINFO) += mdio-boardinfo.o -+ - obj-$(CONFIG_PHYLIB) += libphy.o - obj-$(CONFIG_SWCONFIG) += swconfig.o - obj-$(CONFIG_MARVELL_PHY) += marvell.o ---- /dev/null -+++ b/drivers/net/phy/mdio-boardinfo.c -@@ -0,0 +1,58 @@ -+/* -+ * mdio-boardinfo.c - collect pre-declarations of PHY devices -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "mdio-boardinfo.h" -+ -+/* -+ * These symbols are exported ONLY FOR the mdio_bus component. -+ * No other users will be supported. -+ */ -+ -+LIST_HEAD(__mdio_board_list); -+EXPORT_SYMBOL_GPL(__mdio_board_list); -+ -+DEFINE_MUTEX(__mdio_board_lock); -+EXPORT_SYMBOL_GPL(__mdio_board_lock); -+ -+/** -+ * mdio_register_board_info - register PHY devices for a given board -+ * @info: array of chip descriptors -+ * @n: how many descriptors are provided -+ * Context: can sleep -+ * -+ * The board info passed can safely be __initdata ... but be careful of -+ * any embedded pointers (platform_data, etc), they're copied as-is. -+ */ -+int __init -+mdiobus_register_board_info(struct mdio_board_info const *info, unsigned n) -+{ -+ struct mdio_board_entry *be; -+ int i; -+ -+ be = kzalloc(n * sizeof(*be), GFP_KERNEL); -+ if (!be) -+ return -ENOMEM; -+ -+ for (i = 0; i < n; i++, be++, info++) { -+ memcpy(&be->board_info, info, sizeof(*info)); -+ mutex_lock(&__mdio_board_lock); -+ list_add_tail(&be->list, &__mdio_board_list); -+ mutex_unlock(&__mdio_board_lock); -+ } -+ -+ return 0; -+} ---- /dev/null -+++ b/drivers/net/phy/mdio-boardinfo.h -@@ -0,0 +1,22 @@ -+/* -+ * mdio-boardinfo.h - boardinfo interface internal to the mdio_bus component -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ */ -+ -+#include -+ -+struct mdio_board_entry { -+ struct list_head list; -+ struct mdio_board_info board_info; -+}; -+ -+/* __mdio_board_lock protects __mdio_board_list -+ * only mdio_bus components are allowed to use these symbols. -+ */ -+extern struct mutex __mdio_board_lock; -+extern struct list_head __mdio_board_list; ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -15,7 +15,7 @@ obj-$(CONFIG_MII) += mii.o - obj-$(CONFIG_MDIO) += mdio.o - obj-$(CONFIG_NET) += Space.o loopback.o - obj-$(CONFIG_NETCONSOLE) += netconsole.o --obj-$(CONFIG_PHYLIB) += phy/ -+obj-y += phy/ - obj-$(CONFIG_RIONET) += rionet.o - obj-$(CONFIG_NET_TEAM) += team/ - obj-$(CONFIG_TUN) += tun.o diff --git a/target/linux/generic/patches-3.3/720-phy_adm6996.patch b/target/linux/generic/patches-3.3/720-phy_adm6996.patch deleted file mode 100644 index c99824a6b0..0000000000 --- a/target/linux/generic/patches-3.3/720-phy_adm6996.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -106,6 +106,13 @@ config MICREL_PHY - ---help--- - Supports the KSZ9021, VSC8201, KS8001 PHYs. - -+config ADM6996_PHY -+ tristate "Driver for ADM6996 switches" -+ select SWCONFIG -+ ---help--- -+ Currently supports the ADM6996FC and ADM6996M switches. -+ Support for FC is very limited. -+ - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -16,6 +16,7 @@ obj-$(CONFIG_VITESSE_PHY) += vitesse.o - obj-$(CONFIG_BROADCOM_PHY) += broadcom.o - obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o - obj-$(CONFIG_ICPLUS_PHY) += icplus.o -+obj-$(CONFIG_ADM6996_PHY) += adm6996.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed.o diff --git a/target/linux/generic/patches-3.3/721-phy_packets.patch b/target/linux/generic/patches-3.3/721-phy_packets.patch deleted file mode 100644 index cdb01be100..0000000000 --- a/target/linux/generic/patches-3.3/721-phy_packets.patch +++ /dev/null @@ -1,175 +0,0 @@ ---- a/include/linux/netdevice.h -+++ b/include/linux/netdevice.h -@@ -1078,6 +1078,11 @@ struct net_device { - const struct net_device_ops *netdev_ops; - const struct ethtool_ops *ethtool_ops; - -+#ifdef CONFIG_ETHERNET_PACKET_MANGLE -+ void (*eth_mangle_rx)(struct net_device *dev, struct sk_buff *skb); -+ struct sk_buff *(*eth_mangle_tx)(struct net_device *dev, struct sk_buff *skb); -+#endif -+ - /* Hardware header description */ - const struct header_ops *header_ops; - -@@ -1134,6 +1139,9 @@ struct net_device { - void *ax25_ptr; /* AX.25 specific data */ - struct wireless_dev *ieee80211_ptr; /* IEEE 802.11 specific data, - assign before registering */ -+#ifdef CONFIG_ETHERNET_PACKET_MANGLE -+ void *phy_ptr; /* PHY device specific data */ -+#endif - - /* - * Cache lines mostly used on receive path (including eth_type_trans()) ---- a/include/linux/if.h -+++ b/include/linux/if.h -@@ -80,6 +80,7 @@ - * skbs on transmit */ - #define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */ - #define IFF_TEAM_PORT 0x40000 /* device used as team port */ -+#define IFF_NO_IP_ALIGN 0x80000 /* do not ip-align allocated rx pkts */ - - #define IF_GET_IFACE 0x0001 /* for querying only */ - #define IF_GET_PROTO 0x0002 ---- a/include/linux/skbuff.h -+++ b/include/linux/skbuff.h -@@ -1661,6 +1661,10 @@ extern struct sk_buff *dev_alloc_skb(uns - extern struct sk_buff *__netdev_alloc_skb(struct net_device *dev, - unsigned int length, gfp_t gfp_mask); - -+extern struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev, -+ unsigned int length, gfp_t gfp); -+ -+ - /** - * netdev_alloc_skb - allocate an skbuff for rx on a specific device - * @dev: network device to receive on -@@ -1680,16 +1684,6 @@ static inline struct sk_buff *netdev_all - return __netdev_alloc_skb(dev, length, GFP_ATOMIC); - } - --static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev, -- unsigned int length, gfp_t gfp) --{ -- struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp); -- -- if (NET_IP_ALIGN && skb) -- skb_reserve(skb, NET_IP_ALIGN); -- return skb; --} -- - static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev, - unsigned int length) - { ---- a/net/Kconfig -+++ b/net/Kconfig -@@ -23,6 +23,12 @@ menuconfig NET - - if NET - -+config ETHERNET_PACKET_MANGLE -+ bool -+ help -+ This option can be selected by phy drivers that need to mangle -+ packets going in or out of an ethernet device. -+ - config WANT_COMPAT_NETLINK_MESSAGES - bool - help ---- a/net/core/dev.c -+++ b/net/core/dev.c -@@ -2267,9 +2267,19 @@ int dev_hard_start_xmit(struct sk_buff * - } - } - -- skb_len = skb->len; -- rc = ops->ndo_start_xmit(skb, dev); -- trace_net_dev_xmit(skb, rc, dev, skb_len); -+#ifdef CONFIG_ETHERNET_PACKET_MANGLE -+ if (!dev->eth_mangle_tx || -+ (skb = dev->eth_mangle_tx(dev, skb)) != NULL) -+#else -+ if (1) -+#endif -+ { -+ skb_len = skb->len; -+ rc = ops->ndo_start_xmit(skb, dev); -+ trace_net_dev_xmit(skb, rc, dev, skb_len); -+ } else { -+ rc = NETDEV_TX_OK; -+ } - if (rc == NETDEV_TX_OK) - txq_trans_update(txq); - return rc; -@@ -2289,9 +2299,19 @@ gso: - if (dev->priv_flags & IFF_XMIT_DST_RELEASE) - skb_dst_drop(nskb); - -- skb_len = nskb->len; -- rc = ops->ndo_start_xmit(nskb, dev); -- trace_net_dev_xmit(nskb, rc, dev, skb_len); -+#ifdef CONFIG_ETHERNET_PACKET_MANGLE -+ if (!dev->eth_mangle_tx || -+ (nskb = dev->eth_mangle_tx(dev, nskb)) != NULL) -+#else -+ if (1) -+#endif -+ { -+ skb_len = nskb->len; -+ rc = ops->ndo_start_xmit(nskb, dev); -+ trace_net_dev_xmit(nskb, rc, dev, skb_len); -+ } else { -+ rc = NETDEV_TX_OK; -+ } - if (unlikely(rc != NETDEV_TX_OK)) { - if (rc & ~NETDEV_TX_MASK) - goto out_kfree_gso_skb; ---- a/net/core/skbuff.c -+++ b/net/core/skbuff.c -@@ -58,6 +58,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -320,6 +321,22 @@ struct sk_buff *__netdev_alloc_skb(struc - } - EXPORT_SYMBOL(__netdev_alloc_skb); - -+struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev, -+ unsigned int length, gfp_t gfp) -+{ -+ struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp); -+ -+#ifdef CONFIG_ETHERNET_PACKET_MANGLE -+ if (dev && (dev->priv_flags & IFF_NO_IP_ALIGN)) -+ return skb; -+#endif -+ -+ if (NET_IP_ALIGN && skb) -+ skb_reserve(skb, NET_IP_ALIGN); -+ return skb; -+} -+EXPORT_SYMBOL(__netdev_alloc_skb_ip_align); -+ - void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off, - int size) - { ---- a/net/ethernet/eth.c -+++ b/net/ethernet/eth.c -@@ -160,6 +160,12 @@ __be16 eth_type_trans(struct sk_buff *sk - struct ethhdr *eth; - - skb->dev = dev; -+ -+#ifdef CONFIG_ETHERNET_PACKET_MANGLE -+ if (dev->eth_mangle_rx) -+ dev->eth_mangle_rx(dev, skb); -+#endif -+ - skb_reset_mac_header(skb); - skb_pull_inline(skb, ETH_HLEN); - eth = eth_hdr(skb); diff --git a/target/linux/generic/patches-3.3/722-phy_mvswitch.patch b/target/linux/generic/patches-3.3/722-phy_mvswitch.patch deleted file mode 100644 index 8a456117fa..0000000000 --- a/target/linux/generic/patches-3.3/722-phy_mvswitch.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -113,6 +113,10 @@ config ADM6996_PHY - Currently supports the ADM6996FC and ADM6996M switches. - Support for FC is very limited. - -+config MVSWITCH_PHY -+ tristate "Driver for Marvell 88E6060 switches" -+ select ETHERNET_PACKET_MANGLE -+ - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -17,6 +17,7 @@ obj-$(CONFIG_BROADCOM_PHY) += broadcom.o - obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o - obj-$(CONFIG_ICPLUS_PHY) += icplus.o - obj-$(CONFIG_ADM6996_PHY) += adm6996.o -+obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed.o diff --git a/target/linux/generic/patches-3.3/723-phy_ip175c.patch b/target/linux/generic/patches-3.3/723-phy_ip175c.patch deleted file mode 100644 index 8eff10cf45..0000000000 --- a/target/linux/generic/patches-3.3/723-phy_ip175c.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -117,6 +117,10 @@ config MVSWITCH_PHY - tristate "Driver for Marvell 88E6060 switches" - select ETHERNET_PACKET_MANGLE - -+config IP17XX_PHY -+ tristate "Driver for IC+ IP17xx switches" -+ select SWCONFIG -+ - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -18,6 +18,7 @@ obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o - obj-$(CONFIG_ICPLUS_PHY) += icplus.o - obj-$(CONFIG_ADM6996_PHY) += adm6996.o - obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o -+obj-$(CONFIG_IP17XX_PHY) += ip17xx.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed.o diff --git a/target/linux/generic/patches-3.3/724-phy_ar8216.patch b/target/linux/generic/patches-3.3/724-phy_ar8216.patch deleted file mode 100644 index 6ed7392a85..0000000000 --- a/target/linux/generic/patches-3.3/724-phy_ar8216.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -121,6 +121,11 @@ config IP17XX_PHY - tristate "Driver for IC+ IP17xx switches" - select SWCONFIG - -+config AR8216_PHY -+ tristate "Driver for Atheros AR8216 switches" -+ select ETHERNET_PACKET_MANGLE -+ select SWCONFIG -+ - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -20,6 +20,7 @@ obj-$(CONFIG_ADM6996_PHY) += adm6996.o - obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o - obj-$(CONFIG_IP17XX_PHY) += ip17xx.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o -+obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic/patches-3.3/725-phy_rtl8306.patch b/target/linux/generic/patches-3.3/725-phy_rtl8306.patch deleted file mode 100644 index 8bde5f2eb1..0000000000 --- a/target/linux/generic/patches-3.3/725-phy_rtl8306.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -126,6 +126,10 @@ config AR8216_PHY - select ETHERNET_PACKET_MANGLE - select SWCONFIG - -+config RTL8306_PHY -+ tristate "Driver for Realtek RTL8306S switches" -+ select SWCONFIG -+ - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -21,6 +21,7 @@ obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o - obj-$(CONFIG_IP17XX_PHY) += ip17xx.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o - obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o -+obj-$(CONFIG_RTL8306_PHY) += rtl8306.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic/patches-3.3/726-phy_rtl8366.patch b/target/linux/generic/patches-3.3/726-phy_rtl8366.patch deleted file mode 100644 index fd952d1fab..0000000000 --- a/target/linux/generic/patches-3.3/726-phy_rtl8366.patch +++ /dev/null @@ -1,45 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -168,6 +168,30 @@ config MDIO_OCTEON - - If in doubt, say Y. - -+config RTL8366_SMI -+ tristate "Driver for the RTL8366 SMI interface" -+ depends on GENERIC_GPIO -+ ---help--- -+ This module implements the SMI interface protocol which is used -+ by some RTL8366 ethernet switch devices via the generic GPIO API. -+ -+if RTL8366_SMI -+ -+config RTL8366_SMI_DEBUG_FS -+ bool "RTL8366 SMI interface debugfs support" -+ depends on DEBUG_FS -+ default n -+ -+config RTL8366S_PHY -+ tristate "Driver for the Realtek RTL8366S switch" -+ select SWCONFIG -+ -+config RTL8366RB_PHY -+ tristate "Driver for the Realtek RTL8366RB switch" -+ select SWCONFIG -+ -+endif # RTL8366_SMI -+ - endif # PHYLIB - - config MICREL_KS8995MA ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -22,6 +22,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o - obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o - obj-$(CONFIG_RTL8306_PHY) += rtl8306.o -+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o -+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o -+obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic/patches-3.3/727-phy-rtl8367.patch b/target/linux/generic/patches-3.3/727-phy-rtl8367.patch deleted file mode 100644 index a24f497c9b..0000000000 --- a/target/linux/generic/patches-3.3/727-phy-rtl8367.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -190,6 +190,10 @@ config RTL8366RB_PHY - tristate "Driver for the Realtek RTL8366RB switch" - select SWCONFIG - -+config RTL8367_PHY -+ tristate "Driver for the Realtek RTL8367R/M switches" -+ select SWCONFIG -+ - endif # RTL8366_SMI - - endif # PHYLIB ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -25,6 +25,7 @@ obj-$(CONFIG_RTL8306_PHY) += rtl8306.o - obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o - obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o - obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o -+obj-$(CONFIG_RTL8367_PHY) += rtl8367.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_FIXED_PHY) += fixed.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic/patches-3.3/728-phy-micrel.patch b/target/linux/generic/patches-3.3/728-phy-micrel.patch deleted file mode 100644 index c41d0309c5..0000000000 --- a/target/linux/generic/patches-3.3/728-phy-micrel.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -130,6 +130,11 @@ config RTL8306_PHY - tristate "Driver for Realtek RTL8306S switches" - select SWCONFIG - -+config MICREL_PHY -+ tristate "Drivers for Micrel/Kendin PHYs" -+ ---help--- -+ Currently has a driver for the KSZ8041 -+ - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -27,6 +27,7 @@ obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o - obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o - obj-$(CONFIG_RTL8367_PHY) += rtl8367.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o -+obj-$(CONFIG_MICREL_PHY) += micrel.o - obj-$(CONFIG_FIXED_PHY) += fixed.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o - obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o diff --git a/target/linux/generic/patches-3.3/729-phy-rtl8367b.patch b/target/linux/generic/patches-3.3/729-phy-rtl8367b.patch deleted file mode 100644 index 82a7386f96..0000000000 --- a/target/linux/generic/patches-3.3/729-phy-rtl8367b.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -199,6 +199,10 @@ config RTL8367_PHY - tristate "Driver for the Realtek RTL8367R/M switches" - select SWCONFIG - -+config RTL8367B_PHY -+ tristate "Driver fot the Realtek RTL8367R-VB switch" -+ select SWCONFIG -+ - endif # RTL8366_SMI - - endif # PHYLIB ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -26,6 +26,7 @@ obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi - obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o - obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o - obj-$(CONFIG_RTL8367_PHY) += rtl8367.o -+obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_MICREL_PHY) += micrel.o - obj-$(CONFIG_FIXED_PHY) += fixed.o diff --git a/target/linux/generic/patches-3.3/729-phy-tantos.patch b/target/linux/generic/patches-3.3/729-phy-tantos.patch deleted file mode 100644 index 99a4e71e5d..0000000000 --- a/target/linux/generic/patches-3.3/729-phy-tantos.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -210,3 +210,8 @@ endif # PHYLIB - config MICREL_KS8995MA - tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" - depends on SPI -+ -+config PSB6970_PHY -+ tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch" -+ select SWCONFIG -+ select ETHERNET_PACKET_MANGLE ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -29,6 +29,7 @@ obj-$(CONFIG_RTL8367_PHY) += rtl8367.o - obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_MICREL_PHY) += micrel.o -+obj-$(CONFIG_PSB6970_PHY) += psb6970.o - obj-$(CONFIG_FIXED_PHY) += fixed.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o - obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o diff --git a/target/linux/generic/patches-3.3/750-hostap_txpower.patch b/target/linux/generic/patches-3.3/750-hostap_txpower.patch deleted file mode 100644 index 8e2ec9afce..0000000000 --- a/target/linux/generic/patches-3.3/750-hostap_txpower.patch +++ /dev/null @@ -1,154 +0,0 @@ ---- a/drivers/net/wireless/hostap/hostap_ap.c -+++ b/drivers/net/wireless/hostap/hostap_ap.c -@@ -2340,13 +2340,13 @@ int prism2_ap_get_sta_qual(local_info_t - addr[count].sa_family = ARPHRD_ETHER; - memcpy(addr[count].sa_data, sta->addr, ETH_ALEN); - if (sta->last_rx_silence == 0) -- qual[count].qual = sta->last_rx_signal < 27 ? -- 0 : (sta->last_rx_signal - 27) * 92 / 127; -+ qual[count].qual = (sta->last_rx_signal - 156) == 0 ? -+ 0 : (sta->last_rx_signal - 156) * 92 / 64; - else -- qual[count].qual = sta->last_rx_signal - -- sta->last_rx_silence - 35; -- qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal); -- qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence); -+ qual[count].qual = (sta->last_rx_signal - -+ sta->last_rx_silence) * 92 / 64; -+ qual[count].level = sta->last_rx_signal; -+ qual[count].noise = sta->last_rx_silence; - qual[count].updated = sta->last_rx_updated; - - sta->last_rx_updated = IW_QUAL_DBM; -@@ -2412,13 +2412,13 @@ int prism2_ap_translate_scan(struct net_ - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = IWEVQUAL; - if (sta->last_rx_silence == 0) -- iwe.u.qual.qual = sta->last_rx_signal < 27 ? -- 0 : (sta->last_rx_signal - 27) * 92 / 127; -+ iwe.u.qual.qual = (sta->last_rx_signal -156) == 0 ? -+ 0 : (sta->last_rx_signal - 156) * 92 / 64; - else -- iwe.u.qual.qual = sta->last_rx_signal - -- sta->last_rx_silence - 35; -- iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal); -- iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence); -+ iwe.u.qual.qual = (sta->last_rx_signal - -+ sta->last_rx_silence) * 92 / 64; -+ iwe.u.qual.level = sta->last_rx_signal; -+ iwe.u.qual.noise = sta->last_rx_silence; - iwe.u.qual.updated = sta->last_rx_updated; - iwe.len = IW_EV_QUAL_LEN; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, ---- a/drivers/net/wireless/hostap/hostap_config.h -+++ b/drivers/net/wireless/hostap/hostap_config.h -@@ -45,4 +45,9 @@ - */ - /* #define PRISM2_NO_STATION_MODES */ - -+/* Enable TX power Setting functions -+ * (min att = -128 , max att = 127) -+ */ -+#define RAW_TXPOWER_SETTING -+ - #endif /* HOSTAP_CONFIG_H */ ---- a/drivers/net/wireless/hostap/hostap.h -+++ b/drivers/net/wireless/hostap/hostap.h -@@ -90,6 +90,7 @@ extern const struct iw_handler_def hosta - extern const struct ethtool_ops prism2_ethtool_ops; - - int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); -+int hostap_restore_power(struct net_device *dev); - - - #endif /* HOSTAP_H */ ---- a/drivers/net/wireless/hostap/hostap_hw.c -+++ b/drivers/net/wireless/hostap/hostap_hw.c -@@ -932,6 +932,7 @@ static int hfa384x_set_rid(struct net_de - prism2_hw_reset(dev); - } - -+ hostap_restore_power(dev); - return res; - } - ---- a/drivers/net/wireless/hostap/hostap_info.c -+++ b/drivers/net/wireless/hostap/hostap_info.c -@@ -434,6 +434,11 @@ static void handle_info_queue_linkstatus - } - - /* Get BSSID if we have a valid AP address */ -+ -+ if ( val == HFA384X_LINKSTATUS_CONNECTED || -+ val == HFA384X_LINKSTATUS_DISCONNECTED ) -+ hostap_restore_power(local->dev); -+ - if (connected) { - netif_carrier_on(local->dev); - netif_carrier_on(local->ddev); ---- a/drivers/net/wireless/hostap/hostap_ioctl.c -+++ b/drivers/net/wireless/hostap/hostap_ioctl.c -@@ -1478,23 +1478,20 @@ static int prism2_txpower_hfa386x_to_dBm - val = 255; - - tmp = val; -- tmp >>= 2; - -- return -12 - tmp; -+ return tmp; - } - - static u16 prism2_txpower_dBm_to_hfa386x(int val) - { - signed char tmp; - -- if (val > 20) -- return 128; -- else if (val < -43) -+ if (val > 127) - return 127; -+ else if (val < -128) -+ return 128; - - tmp = val; -- tmp = -12 - tmp; -- tmp <<= 2; - - return (unsigned char) tmp; - } -@@ -4057,3 +4054,35 @@ int hostap_ioctl(struct net_device *dev, - - return ret; - } -+ -+/* BUG FIX: Restore power setting value when lost due to F/W bug */ -+ -+int hostap_restore_power(struct net_device *dev) -+{ -+ struct hostap_interface *iface = netdev_priv(dev); -+ local_info_t *local = iface->local; -+ -+ u16 val; -+ int ret = 0; -+ -+ if (local->txpower_type == PRISM2_TXPOWER_OFF) { -+ val = 0xff; /* use all standby and sleep modes */ -+ ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, -+ HFA386X_CR_A_D_TEST_MODES2, -+ &val, NULL); -+ } -+ -+#ifdef RAW_TXPOWER_SETTING -+ if (local->txpower_type == PRISM2_TXPOWER_FIXED) { -+ val = HFA384X_TEST_CFG_BIT_ALC; -+ local->func->cmd(dev, HFA384X_CMDCODE_TEST | -+ (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL); -+ val = prism2_txpower_dBm_to_hfa386x(local->txpower); -+ ret = (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, -+ HFA386X_CR_MANUAL_TX_POWER, &val, NULL)); -+ } -+#endif /* RAW_TXPOWER_SETTING */ -+ return (ret ? -EOPNOTSUPP : 0); -+} -+ -+EXPORT_SYMBOL(hostap_restore_power); diff --git a/target/linux/generic/patches-3.3/800-usb-ohci-multiple-platform-driver-fix.patch b/target/linux/generic/patches-3.3/800-usb-ohci-multiple-platform-driver-fix.patch deleted file mode 100644 index a2a213b381..0000000000 --- a/target/linux/generic/patches-3.3/800-usb-ohci-multiple-platform-driver-fix.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1123,7 +1123,7 @@ MODULE_LICENSE ("GPL"); - - #ifdef CONFIG_USB_OHCI_HCD_PLATFORM - #include "ohci-platform.c" --#define PLATFORM_DRIVER ohci_platform_driver -+#define OHCI_PLATFORM_DRIVER ohci_platform_driver - #endif - - #if !defined(PCI_DRIVER) && \ -@@ -1135,7 +1135,8 @@ MODULE_LICENSE ("GPL"); - !defined(PS3_SYSTEM_BUS_DRIVER) && \ - !defined(SM501_OHCI_DRIVER) && \ - !defined(TMIO_OHCI_DRIVER) && \ -- !defined(SSB_OHCI_DRIVER) -+ !defined(SSB_OHCI_DRIVER) && \ -+ !defined(OHCI_PLATFORM_DRIVER) - #error "missing bus glue for ohci-hcd" - #endif - -@@ -1219,9 +1220,19 @@ static int __init ohci_hcd_mod_init(void - goto error_tmio; - #endif - -+#ifdef OHCI_PLATFORM_DRIVER -+ retval = platform_driver_register(&OHCI_PLATFORM_DRIVER); -+ if (retval < 0) -+ goto error_ohci; -+#endif -+ - return retval; - - /* Error path */ -+#ifdef OHCI_PLATFORM_DRIVER -+ platform_driver_unregister(&OHCI_PLATFORM_DRIVER); -+ error_ohci: -+#endif - #ifdef TMIO_OHCI_DRIVER - platform_driver_unregister(&TMIO_OHCI_DRIVER); - error_tmio: -@@ -1275,6 +1286,9 @@ module_init(ohci_hcd_mod_init); - - static void __exit ohci_hcd_mod_exit(void) - { -+#ifdef OHCI_PLATFORM_DRIVER -+ platform_driver_unregister(&OHCI_PLATFORM_DRIVER); -+#endif - #ifdef TMIO_OHCI_DRIVER - platform_driver_unregister(&TMIO_OHCI_DRIVER); - #endif diff --git a/target/linux/generic/patches-3.3/801-usb-ehci-multiple-platform-driver-fix.patch b/target/linux/generic/patches-3.3/801-usb-ehci-multiple-platform-driver-fix.patch deleted file mode 100644 index 9bf509768c..0000000000 --- a/target/linux/generic/patches-3.3/801-usb-ehci-multiple-platform-driver-fix.patch +++ /dev/null @@ -1,47 +0,0 @@ ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1383,12 +1383,12 @@ MODULE_LICENSE ("GPL"); - - #ifdef CONFIG_USB_EHCI_HCD_PLATFORM - #include "ehci-platform.c" --#define PLATFORM_DRIVER ehci_platform_driver -+#define EHCI_PLATFORM_DRIVER ehci_platform_driver - #endif - - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ -- !defined(XILINX_OF_PLATFORM_DRIVER) -+ !defined(XILINX_OF_PLATFORM_DRIVER) && !defined(EHCI_PLATFORM_DRIVER) - #error "missing bus glue for ehci-hcd" - #endif - -@@ -1448,8 +1448,19 @@ static int __init ehci_hcd_init(void) - if (retval < 0) - goto clean4; - #endif -+ -+#ifdef EHCI_PLATFORM_DRIVER -+ retval = platform_driver_register(&EHCI_PLATFORM_DRIVER); -+ if (retval < 0) -+ goto clean5; -+#endif -+ - return retval; - -+#ifdef EHCI_PLATFORM_DRIVER -+ platform_driver_unregister(&EHCI_PLATFORM_DRIVER); -+clean5: -+#endif - #ifdef XILINX_OF_PLATFORM_DRIVER - /* platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); */ - clean4: -@@ -1482,6 +1493,9 @@ module_init(ehci_hcd_init); - - static void __exit ehci_hcd_cleanup(void) - { -+#ifdef EHCI_PLATFORM_DRIVER -+ platform_driver_unregister(&EHCI_PLATFORM_DRIVER); -+#endif - #ifdef XILINX_OF_PLATFORM_DRIVER - platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); - #endif diff --git a/target/linux/generic/patches-3.3/810-pci_disable_common_quirks.patch b/target/linux/generic/patches-3.3/810-pci_disable_common_quirks.patch deleted file mode 100644 index 4802157189..0000000000 --- a/target/linux/generic/patches-3.3/810-pci_disable_common_quirks.patch +++ /dev/null @@ -1,43 +0,0 @@ ---- a/drivers/pci/Kconfig -+++ b/drivers/pci/Kconfig -@@ -51,6 +51,12 @@ config XEN_PCIDEV_FRONTEND - The PCI device frontend driver allows the kernel to import arbitrary - PCI devices from a PCI backend to support PCI driver domains. - -+config PCI_DISABLE_COMMON_QUIRKS -+ bool "PCI disable common quirks" -+ depends on PCI -+ help -+ If you don't know what to do here, say N. -+ - config HT_IRQ - bool "Interrupts on hypertransport devices" - default y ---- a/drivers/pci/quirks.c -+++ b/drivers/pci/quirks.c -@@ -105,6 +105,7 @@ static void __devinit quirk_mmio_always_ - } - DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, quirk_mmio_always_on); - -+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS - /* The Mellanox Tavor device gives false positive parity errors - * Mark this device with a broken_parity_status, to allow - * PCI scanning code to "skip" this now blacklisted device. -@@ -1990,7 +1991,9 @@ static void __devinit fixup_rev1_53c810( - } - } - DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); -+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */ - -+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS - /* Enable 1k I/O space granularity on the Intel P64H2 */ - static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev) - { -@@ -2666,6 +2669,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT - quirk_msi_intx_disable_bug); - - #endif /* CONFIG_PCI_MSI */ -+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */ - - /* Allow manual resource allocation for PCI hotplug bridges - * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For diff --git a/target/linux/generic/patches-3.3/811-pci_disable_usb_common_quirks.patch b/target/linux/generic/patches-3.3/811-pci_disable_usb_common_quirks.patch deleted file mode 100644 index 7bf8eaf1e1..0000000000 --- a/target/linux/generic/patches-3.3/811-pci_disable_usb_common_quirks.patch +++ /dev/null @@ -1,38 +0,0 @@ - ---- a/drivers/usb/host/pci-quirks.c -+++ b/drivers/usb/host/pci-quirks.c -@@ -432,6 +432,8 @@ reset_needed: - } - EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc); - -+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS -+ - static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask) - { - u16 cmd; -@@ -928,3 +930,5 @@ static void __devinit quirk_usb_early_ha - pci_disable_device(pdev); - } - DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); -+ -+#endif ---- a/drivers/usb/host/pci-quirks.h -+++ b/drivers/usb/host/pci-quirks.h -@@ -8,9 +8,17 @@ int usb_amd_find_chipset_info(void); - void usb_amd_dev_put(void); - void usb_amd_quirk_pll_disable(void); - void usb_amd_quirk_pll_enable(void); -+#if !defined(CONFIG_PCI_DISABLE_COMMON_QUIRKS) - bool usb_is_intel_switchable_xhci(struct pci_dev *pdev); - void usb_enable_xhci_ports(struct pci_dev *xhci_pdev); - #else -+static inline bool usb_is_intel_switchable_xhci(struct pci_dev *pdev) -+{ -+ return false; -+} -+static inline void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) {} -+#endif -+#else - static inline void usb_amd_quirk_pll_disable(void) {} - static inline void usb_amd_quirk_pll_enable(void) {} - static inline void usb_amd_dev_put(void) {} diff --git a/target/linux/generic/patches-3.3/820-usb_add_usb_find_device_by_name.patch b/target/linux/generic/patches-3.3/820-usb_add_usb_find_device_by_name.patch deleted file mode 100644 index ee50ff90ef..0000000000 --- a/target/linux/generic/patches-3.3/820-usb_add_usb_find_device_by_name.patch +++ /dev/null @@ -1,84 +0,0 @@ ---- a/drivers/usb/core/usb.c -+++ b/drivers/usb/core/usb.c -@@ -652,6 +652,71 @@ int __usb_get_extra_descriptor(char *buf - } - EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor); - -+static struct usb_device *match_device_name(struct usb_device *dev, -+ const char *name) -+{ -+ struct usb_device *ret_dev = NULL; -+ int child; -+ -+ dev_dbg(&dev->dev, "check for name %s ...\n", name); -+ -+ /* see if this device matches */ -+ if (strcmp(dev_name(&dev->dev), name) == 0 ) { -+ dev_dbg(&dev->dev, "matched this device!\n"); -+ ret_dev = usb_get_dev(dev); -+ goto exit; -+ } -+ -+ /* look through all of the children of this device */ -+ for (child = 0; child < dev->maxchild; ++child) { -+ if (dev->children[child]) { -+ usb_lock_device(dev->children[child]); -+ ret_dev = match_device_name(dev->children[child], name); -+ usb_unlock_device(dev->children[child]); -+ if (ret_dev) -+ goto exit; -+ } -+ } -+exit: -+ return ret_dev; -+} -+ -+/** -+ * usb_find_device_by_name - find a specific usb device in the system -+ * @name: the name of the device to find -+ * -+ * Returns a pointer to a struct usb_device if such a specified usb -+ * device is present in the system currently. The usage count of the -+ * device will be incremented if a device is found. Make sure to call -+ * usb_put_dev() when the caller is finished with the device. -+ * -+ * If a device with the specified bus id is not found, NULL is returned. -+ */ -+struct usb_device *usb_find_device_by_name(const char *name) -+{ -+ struct list_head *buslist; -+ struct usb_bus *bus; -+ struct usb_device *dev = NULL; -+ -+ mutex_lock(&usb_bus_list_lock); -+ for (buslist = usb_bus_list.next; -+ buslist != &usb_bus_list; -+ buslist = buslist->next) { -+ bus = container_of(buslist, struct usb_bus, bus_list); -+ if (!bus->root_hub) -+ continue; -+ usb_lock_device(bus->root_hub); -+ dev = match_device_name(bus->root_hub, name); -+ usb_unlock_device(bus->root_hub); -+ if (dev) -+ goto exit; -+ } -+exit: -+ mutex_unlock(&usb_bus_list_lock); -+ return dev; -+} -+EXPORT_SYMBOL_GPL(usb_find_device_by_name); -+ - /** - * usb_alloc_coherent - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP - * @dev: device the buffer will be used with ---- a/include/linux/usb.h -+++ b/include/linux/usb.h -@@ -531,6 +531,7 @@ extern int usb_lock_device_for_reset(str - extern int usb_reset_device(struct usb_device *dev); - extern void usb_queue_reset_device(struct usb_interface *dev); - -+extern struct usb_device *usb_find_device_by_name(const char *name); - - /* USB autosuspend and autoresume */ - #ifdef CONFIG_USB_SUSPEND diff --git a/target/linux/generic/patches-3.3/830-ledtrig_morse.patch b/target/linux/generic/patches-3.3/830-ledtrig_morse.patch deleted file mode 100644 index 3283807f2b..0000000000 --- a/target/linux/generic/patches-3.3/830-ledtrig_morse.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -480,4 +480,8 @@ config LEDS_TRIGGER_DEFAULT_ON - comment "iptables trigger is under Netfilter config (LED target)" - depends on LEDS_TRIGGERS - -+config LEDS_TRIGGER_MORSE -+ tristate "LED Morse Trigger" -+ depends on LEDS_TRIGGERS -+ - endif # NEW_LEDS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -57,3 +57,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += - obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o - obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o - obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o -+obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o ---- a/drivers/leds/ledtrig-morse.c -+++ b/drivers/leds/ledtrig-morse.c -@@ -26,7 +26,6 @@ - #include - #include - #include --#include - #include - #include - #include diff --git a/target/linux/generic/patches-3.3/831-ledtrig_netdev.patch b/target/linux/generic/patches-3.3/831-ledtrig_netdev.patch deleted file mode 100644 index c100277c22..0000000000 --- a/target/linux/generic/patches-3.3/831-ledtrig_netdev.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -484,4 +484,11 @@ config LEDS_TRIGGER_MORSE - tristate "LED Morse Trigger" - depends on LEDS_TRIGGERS - -+config LEDS_TRIGGER_NETDEV -+ tristate "LED Netdev Trigger" -+ depends on NET && LEDS_TRIGGERS -+ help -+ This allows LEDs to be controlled by network device activity. -+ If unsure, say Y. -+ - endif # NEW_LEDS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -58,3 +58,4 @@ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += - obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o - obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o - obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o -+obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o ---- a/drivers/leds/ledtrig-netdev.c -+++ b/drivers/leds/ledtrig-netdev.c -@@ -22,7 +22,6 @@ - #include - #include - #include --#include - #include - #include - #include -@@ -294,8 +293,9 @@ done: - static void netdev_trig_timer(unsigned long arg) - { - struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg; -- const struct net_device_stats *dev_stats; -+ struct rtnl_link_stats64 *dev_stats; - unsigned new_activity; -+ struct rtnl_link_stats64 temp; - - write_lock(&trigger_data->lock); - -@@ -305,7 +305,7 @@ static void netdev_trig_timer(unsigned l - goto no_restart; - } - -- dev_stats = dev_get_stats(trigger_data->net_dev); -+ dev_stats = dev_get_stats(trigger_data->net_dev, &temp); - new_activity = - ((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) + - ((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0); diff --git a/target/linux/generic/patches-3.3/832-ledtrig_usbdev.patch b/target/linux/generic/patches-3.3/832-ledtrig_usbdev.patch deleted file mode 100644 index 8933497e84..0000000000 --- a/target/linux/generic/patches-3.3/832-ledtrig_usbdev.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -491,4 +491,11 @@ config LEDS_TRIGGER_NETDEV - This allows LEDs to be controlled by network device activity. - If unsure, say Y. - -+config LEDS_TRIGGER_USBDEV -+ tristate "LED USB device Trigger" -+ depends on USB && LEDS_TRIGGERS -+ help -+ This allows LEDs to be controlled by the presence/activity of -+ an USB device. If unsure, say N. -+ - endif # NEW_LEDS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -59,3 +59,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt - obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o - obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o - obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o -+obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o ---- a/drivers/leds/ledtrig-usbdev.c -+++ b/drivers/leds/ledtrig-usbdev.c -@@ -24,7 +24,6 @@ - #include - #include - #include --#include - #include - #include - #include diff --git a/target/linux/generic/patches-3.3/840-rtc7301.patch b/target/linux/generic/patches-3.3/840-rtc7301.patch deleted file mode 100644 index 35dd3b8bd7..0000000000 --- a/target/linux/generic/patches-3.3/840-rtc7301.patch +++ /dev/null @@ -1,250 +0,0 @@ ---- a/drivers/rtc/Kconfig -+++ b/drivers/rtc/Kconfig -@@ -719,6 +719,15 @@ config RTC_DRV_NUC900 - If you say yes here you get support for the RTC subsystem of the - NUC910/NUC920 used in embedded systems. - -+config RTC_DRV_RTC7301 -+ tristate "Epson RTC-7301 SF/DG" -+ help -+ If you say Y here you will get support for the -+ Epson RTC-7301 SF/DG RTC chips. -+ -+ This driver can also be built as a module. If so, the module -+ will be called rtc-7301. -+ - comment "on-CPU RTC drivers" - - config RTC_DRV_DAVINCI ---- a/drivers/rtc/Makefile -+++ b/drivers/rtc/Makefile -@@ -86,6 +86,7 @@ obj-$(CONFIG_RTC_DRV_RP5C01) += rtc-rp5c - obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o - obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o - obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o -+obj-$(CONFIG_RTC_DRV_RTC7301) += rtc-rtc7301.o - obj-$(CONFIG_RTC_DRV_RV3029C2) += rtc-rv3029c2.o - obj-$(CONFIG_RTC_DRV_RX8025) += rtc-rx8025.o - obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o ---- /dev/null -+++ b/drivers/rtc/rtc-rtc7301.c -@@ -0,0 +1,219 @@ -+/* -+ * Driver for Epson RTC-7301SF/DG -+ * -+ * Copyright (C) 2009 Jose Vasconcellos -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define RTC_NAME "rtc7301" -+#define RTC_VERSION "0.1" -+ -+/* Epson RTC-7301 register addresses */ -+#define RTC7301_SEC 0x00 -+#define RTC7301_SEC10 0x01 -+#define RTC7301_MIN 0x02 -+#define RTC7301_MIN10 0x03 -+#define RTC7301_HOUR 0x04 -+#define RTC7301_HOUR10 0x05 -+#define RTC7301_WEEKDAY 0x06 -+#define RTC7301_DAY 0x07 -+#define RTC7301_DAY10 0x08 -+#define RTC7301_MON 0x09 -+#define RTC7301_MON10 0x0A -+#define RTC7301_YEAR 0x0B -+#define RTC7301_YEAR10 0x0C -+#define RTC7301_YEAR100 0x0D -+#define RTC7301_YEAR1000 0x0E -+#define RTC7301_CTRLREG 0x0F -+ -+static uint8_t __iomem *rtc7301_base; -+ -+#define read_reg(offset) (readb(rtc7301_base + offset) & 0xf) -+#define write_reg(offset, data) writeb(data, rtc7301_base + (offset)) -+ -+#define rtc7301_isbusy() (read_reg(RTC7301_CTRLREG) & 1) -+ -+static void rtc7301_init_settings(void) -+{ -+ int i; -+ -+ write_reg(RTC7301_CTRLREG, 2); -+ write_reg(RTC7301_YEAR1000, 2); -+ udelay(122); -+ -+ /* bank 1 */ -+ write_reg(RTC7301_CTRLREG, 6); -+ for (i=0; i<15; i++) -+ write_reg(i, 0); -+ -+ /* bank 2 */ -+ write_reg(RTC7301_CTRLREG, 14); -+ for (i=0; i<15; i++) -+ write_reg(i, 0); -+ write_reg(RTC7301_CTRLREG, 0); -+} -+ -+static int rtc7301_get_datetime(struct device *dev, struct rtc_time *dt) -+{ -+ int cnt; -+ uint8_t buf[16]; -+ -+ cnt = 0; -+ while (rtc7301_isbusy()) { -+ udelay(244); -+ if (cnt++ > 100) { -+ dev_err(dev, "%s: timeout error %x\n", __func__, rtc7301_base[RTC7301_CTRLREG]); -+ return -EIO; -+ } -+ } -+ -+ for (cnt=0; cnt<16; cnt++) -+ buf[cnt] = read_reg(cnt); -+ -+ if (buf[RTC7301_SEC10] & 8) { -+ dev_err(dev, "%s: RTC not set\n", __func__); -+ return -EINVAL; -+ } -+ -+ memset(dt, 0, sizeof(*dt)); -+ -+ dt->tm_sec = buf[RTC7301_SEC] + buf[RTC7301_SEC10]*10; -+ dt->tm_min = buf[RTC7301_MIN] + buf[RTC7301_MIN10]*10; -+ dt->tm_hour = buf[RTC7301_HOUR] + buf[RTC7301_HOUR10]*10; -+ -+ dt->tm_mday = buf[RTC7301_DAY] + buf[RTC7301_DAY10]*10; -+ dt->tm_mon = buf[RTC7301_MON] + buf[RTC7301_MON10]*10 - 1; -+ dt->tm_year = buf[RTC7301_YEAR] + buf[RTC7301_YEAR10]*10 + -+ buf[RTC7301_YEAR100]*100 + -+ ((buf[RTC7301_YEAR1000] & 3)*1000) - 1900; -+ -+ /* the rtc device may contain illegal values on power up -+ * according to the data sheet. make sure they are valid. -+ */ -+ -+ return rtc_valid_tm(dt); -+} -+ -+static int rtc7301_set_datetime(struct device *dev, struct rtc_time *dt) -+{ -+ int data; -+ -+ data = dt->tm_year + 1900; -+ if (data >= 2100 || data < 1900) -+ return -EINVAL; -+ -+ write_reg(RTC7301_CTRLREG, 2); -+ udelay(122); -+ -+ data = bin2bcd(dt->tm_sec); -+ write_reg(RTC7301_SEC, data); -+ write_reg(RTC7301_SEC10, (data >> 4)); -+ -+ data = bin2bcd(dt->tm_min); -+ write_reg(RTC7301_MIN, data ); -+ write_reg(RTC7301_MIN10, (data >> 4)); -+ -+ data = bin2bcd(dt->tm_hour); -+ write_reg(RTC7301_HOUR, data); -+ write_reg(RTC7301_HOUR10, (data >> 4)); -+ -+ data = bin2bcd(dt->tm_mday); -+ write_reg(RTC7301_DAY, data); -+ write_reg(RTC7301_DAY10, (data>> 4)); -+ -+ data = bin2bcd(dt->tm_mon + 1); -+ write_reg(RTC7301_MON, data); -+ write_reg(RTC7301_MON10, (data >> 4)); -+ -+ data = bin2bcd(dt->tm_year % 100); -+ write_reg(RTC7301_YEAR, data); -+ write_reg(RTC7301_YEAR10, (data >> 4)); -+ data = bin2bcd((1900 + dt->tm_year) / 100); -+ write_reg(RTC7301_YEAR100, data); -+ -+ data = bin2bcd(dt->tm_wday); -+ write_reg(RTC7301_WEEKDAY, data); -+ -+ write_reg(RTC7301_CTRLREG, 0); -+ -+ return 0; -+} -+ -+static const struct rtc_class_ops rtc7301_rtc_ops = { -+ .read_time = rtc7301_get_datetime, -+ .set_time = rtc7301_set_datetime, -+}; -+ -+static int __devinit rtc7301_probe(struct platform_device *pdev) -+{ -+ struct rtc_device *rtc; -+ struct resource *res; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) -+ return -ENOENT; -+ -+ rtc7301_base = ioremap_nocache(res->start, 0x1000 /*res->end - res->start + 1*/); -+ if (!rtc7301_base) -+ return -EINVAL; -+ -+ rtc = rtc_device_register(RTC_NAME, &pdev->dev, -+ &rtc7301_rtc_ops, THIS_MODULE); -+ if (IS_ERR(rtc)) { -+ iounmap(rtc7301_base); -+ return PTR_ERR(rtc); -+ } -+ -+ platform_set_drvdata(pdev, rtc); -+ -+ rtc7301_init_settings(); -+ return 0; -+} -+ -+static int __devexit rtc7301_remove(struct platform_device *pdev) -+{ -+ struct rtc_device *rtc = platform_get_drvdata(pdev); -+ -+ if (rtc) -+ rtc_device_unregister(rtc); -+ if (rtc7301_base) -+ iounmap(rtc7301_base); -+ return 0; -+} -+ -+static struct platform_driver rtc7301_driver = { -+ .driver = { -+ .name = RTC_NAME, -+ .owner = THIS_MODULE, -+ }, -+ .probe = rtc7301_probe, -+ .remove = __devexit_p(rtc7301_remove), -+}; -+ -+static __init int rtc7301_init(void) -+{ -+ return platform_driver_register(&rtc7301_driver); -+} -+module_init(rtc7301_init); -+ -+static __exit void rtc7301_exit(void) -+{ -+ platform_driver_unregister(&rtc7301_driver); -+} -+module_exit(rtc7301_exit); -+ -+MODULE_DESCRIPTION("Epson 7301 RTC driver"); -+MODULE_AUTHOR("Jose Vasconcellos "); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:" RTC_NAME); -+MODULE_VERSION(RTC_VERSION); diff --git a/target/linux/generic/patches-3.3/841-rtc_pt7c4338.patch b/target/linux/generic/patches-3.3/841-rtc_pt7c4338.patch deleted file mode 100644 index 2c9e6035aa..0000000000 --- a/target/linux/generic/patches-3.3/841-rtc_pt7c4338.patch +++ /dev/null @@ -1,247 +0,0 @@ ---- a/drivers/rtc/Kconfig -+++ b/drivers/rtc/Kconfig -@@ -379,6 +379,15 @@ config RTC_DRV_RV3029C2 - This driver can also be built as a module. If so, the module - will be called rtc-rv3029c2. - -+config RTC_DRV_PT7C4338 -+ tristate "Pericom Technology Inc. PT7C4338 RTC" -+ help -+ If you say yes here you get support for the Pericom Technology -+ Inc. PT7C4338 RTC chip. -+ -+ This driver can also be built as a module. If so, the module -+ will be called rtc-pt7c4338. -+ - endif # I2C - - comment "SPI RTC drivers" ---- a/drivers/rtc/Makefile -+++ b/drivers/rtc/Makefile -@@ -79,6 +79,7 @@ obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030 - obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o - obj-$(CONFIG_RTC_DRV_PM8XXX) += rtc-pm8xxx.o - obj-$(CONFIG_RTC_DRV_PS3) += rtc-ps3.o -+obj-$(CONFIG_RTC_DRV_PT7C4338) += rtc-pt7c4338.o - obj-$(CONFIG_RTC_DRV_PUV3) += rtc-puv3.o - obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o - obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o ---- /dev/null -+++ b/drivers/rtc/rtc-pt7c4338.c -@@ -0,0 +1,216 @@ -+/* -+ * Copyright 2010 Freescale Semiconductor, Inc. -+ * -+ * Author: Priyanka Jain -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+/* -+ * This file provides Date & Time support (no alarms) for PT7C4338 chip. -+ * -+ * This file is based on drivers/rtc/rtc-ds1307.c -+ * -+ * PT7C4338 chip is manufactured by Pericom Technology Inc. -+ * It is a serial real-time clock which provides -+ * 1)Low-power clock/calendar. -+ * 2)Programmable square-wave output. -+ * It has 56 bytes of nonvolatile RAM. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* RTC register addresses */ -+#define PT7C4338_REG_SECONDS 0x00 -+#define PT7C4338_REG_MINUTES 0x01 -+#define PT7C4338_REG_HOURS 0x02 -+#define PT7C4338_REG_AMPM 0x02 -+#define PT7C4338_REG_DAY 0x03 -+#define PT7C4338_REG_DATE 0x04 -+#define PT7C4338_REG_MONTH 0x05 -+#define PT7C4338_REG_YEAR 0x06 -+#define PT7C4338_REG_CTRL_STAT 0x07 -+ -+/* RTC second register address bit */ -+#define PT7C4338_SEC_BIT_CH 0x80 /*Clock Halt (in Register 0)*/ -+ -+/* RTC control and status register bits */ -+#define PT7C4338_CTRL_STAT_BIT_RS0 0x1 /*Rate select 0*/ -+#define PT7C4338_CTRL_STAT_BIT_RS1 0x2 /*Rate select 1*/ -+#define PT7C4338_CTRL_STAT_BIT_SQWE 0x10 /*Square Wave Enable*/ -+#define PT7C4338_CTRL_STAT_BIT_OSF 0x20 /*Oscillator Stop Flag*/ -+#define PT7C4338_CTRL_STAT_BIT_OUT 0x80 /*Output Level Control*/ -+ -+static const struct i2c_device_id pt7c4338_id[] = { -+ { "pt7c4338", 0 }, -+ { } -+}; -+MODULE_DEVICE_TABLE(i2c, pt7c4338_id); -+ -+struct pt7c4338{ -+ struct i2c_client *client; -+ struct rtc_device *rtc; -+}; -+ -+static int pt7c4338_read_time(struct device *dev, struct rtc_time *time) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ int ret; -+ u8 buf[7]; -+ u8 year, month, day, hour, minute, second; -+ u8 week, twelve_hr, am_pm; -+ -+ ret = i2c_smbus_read_i2c_block_data(client, -+ PT7C4338_REG_SECONDS, 7, buf); -+ if (ret < 0) -+ return ret; -+ if (ret < 7) -+ return -EIO; -+ -+ second = buf[0]; -+ minute = buf[1]; -+ hour = buf[2]; -+ week = buf[3]; -+ day = buf[4]; -+ month = buf[5]; -+ year = buf[6]; -+ -+ /* Extract additional information for AM/PM */ -+ twelve_hr = hour & 0x40; -+ am_pm = hour & 0x20; -+ -+ /* Write to rtc_time structure */ -+ time->tm_sec = bcd2bin(second & 0x7f); -+ time->tm_min = bcd2bin(minute & 0x7f); -+ if (twelve_hr) { -+ /* Convert to 24 hr */ -+ if (am_pm) -+ time->tm_hour = bcd2bin(hour & 0x10) + 12; -+ else -+ time->tm_hour = bcd2bin(hour & 0xBF); -+ } else { -+ time->tm_hour = bcd2bin(hour); -+ } -+ -+ time->tm_wday = bcd2bin(week & 0x07) - 1; -+ time->tm_mday = bcd2bin(day & 0x3f); -+ time->tm_mon = bcd2bin(month & 0x1F) - 1; -+ /* assume 20YY not 19YY */ -+ time->tm_year = bcd2bin(year) + 100; -+ -+ return 0; -+} -+ -+static int pt7c4338_set_time(struct device *dev, struct rtc_time *time) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ u8 buf[7]; -+ -+ /* Extract time from rtc_time and load into pt7c4338*/ -+ buf[0] = bin2bcd(time->tm_sec); -+ buf[1] = bin2bcd(time->tm_min); -+ buf[2] = bin2bcd(time->tm_hour); -+ buf[3] = bin2bcd(time->tm_wday + 1); /* Day of the week */ -+ buf[4] = bin2bcd(time->tm_mday); /* Date */ -+ buf[5] = bin2bcd(time->tm_mon + 1); -+ -+ /* assume 20YY not 19YY */ -+ if (time->tm_year >= 100) -+ buf[6] = bin2bcd(time->tm_year - 100); -+ else -+ buf[6] = bin2bcd(time->tm_year); -+ -+ return i2c_smbus_write_i2c_block_data(client, -+ PT7C4338_REG_SECONDS, 7, buf); -+} -+ -+static const struct rtc_class_ops pt7c4338_rtc_ops = { -+ .read_time = pt7c4338_read_time, -+ .set_time = pt7c4338_set_time, -+}; -+ -+static int pt7c4338_probe(struct i2c_client *client, -+ const struct i2c_device_id *id) -+{ -+ struct pt7c4338 *pt7c4338; -+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); -+ int ret; -+ -+ pt7c4338 = kzalloc(sizeof(struct pt7c4338), GFP_KERNEL); -+ if (!pt7c4338) -+ return -ENOMEM; -+ -+ pt7c4338->client = client; -+ i2c_set_clientdata(client, pt7c4338); -+ pt7c4338->rtc = rtc_device_register(client->name, &client->dev, -+ &pt7c4338_rtc_ops, THIS_MODULE); -+ if (IS_ERR(pt7c4338->rtc)) { -+ ret = PTR_ERR(pt7c4338->rtc); -+ dev_err(&client->dev, "unable to register the class device\n"); -+ goto out_free; -+ } -+ -+ return 0; -+out_free: -+ i2c_set_clientdata(client, NULL); -+ kfree(pt7c4338); -+ return ret; -+} -+ -+static int __devexit pt7c4338_remove(struct i2c_client *client) -+{ -+ struct pt7c4338 *pt7c4338 = i2c_get_clientdata(client); -+ -+ rtc_device_unregister(pt7c4338->rtc); -+ i2c_set_clientdata(client, NULL); -+ kfree(pt7c4338); -+ return 0; -+} -+ -+static struct i2c_driver pt7c4338_driver = { -+ .driver = { -+ .name = "rtc-pt7c4338", -+ .owner = THIS_MODULE, -+ }, -+ .probe = pt7c4338_probe, -+ .remove = __devexit_p(pt7c4338_remove), -+ .id_table = pt7c4338_id, -+}; -+ -+static int __init pt7c4338_init(void) -+{ -+ return i2c_add_driver(&pt7c4338_driver); -+} -+ -+static void __exit pt7c4338_exit(void) -+{ -+ i2c_del_driver(&pt7c4338_driver); -+} -+ -+module_init(pt7c4338_init); -+module_exit(pt7c4338_exit); -+ -+MODULE_AUTHOR("Priyanka Jain "); -+MODULE_DESCRIPTION("pericom Technology Inc. PT7C4338 RTC Driver"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/generic/patches-3.3/861-04_spi_gpio_implement_spi_delay.patch b/target/linux/generic/patches-3.3/861-04_spi_gpio_implement_spi_delay.patch deleted file mode 100644 index 7828869c51..0000000000 --- a/target/linux/generic/patches-3.3/861-04_spi_gpio_implement_spi_delay.patch +++ /dev/null @@ -1,58 +0,0 @@ -Implement the SPI-GPIO delay function for busses that need speed limitation. - ---mb - - - ---- a/drivers/spi/spi-gpio.c -+++ b/drivers/spi/spi-gpio.c -@@ -22,6 +22,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -70,6 +71,7 @@ struct spi_gpio { - * #define SPI_MOSI_GPIO 120 - * #define SPI_SCK_GPIO 121 - * #define SPI_N_CHIPSEL 4 -+ * #undef NEED_SPIDELAY - * #include "spi-gpio.c" - */ - -@@ -77,6 +79,7 @@ struct spi_gpio { - #define DRIVER_NAME "spi_gpio" - - #define GENERIC_BITBANG /* vs tight inlines */ -+#define NEED_SPIDELAY 1 - - /* all functions referencing these symbols must define pdata */ - #define SPI_MISO_GPIO ((pdata)->miso) -@@ -121,12 +124,20 @@ static inline int getmiso(const struct s - #undef pdata - - /* -- * NOTE: this clocks "as fast as we can". It "should" be a function of the -- * requested device clock. Software overhead means we usually have trouble -- * reaching even one Mbit/sec (except when we can inline bitops), so for now -- * we'll just assume we never need additional per-bit slowdowns. -+ * NOTE: to clock "as fast as we can", set spi_device.max_speed_hz -+ * and spi_transfer.speed_hz to 0. -+ * Otherwise this is a function of the requested device clock. -+ * Software overhead means we usually have trouble -+ * reaching even one Mbit/sec (except when we can inline bitops). So on small -+ * embedded devices with fast SPI slaves you usually don't need a delay. - */ --#define spidelay(nsecs) do {} while (0) -+static inline void spidelay(unsigned nsecs) -+{ -+#ifdef NEED_SPIDELAY -+ if (unlikely(nsecs)) -+ ndelay(nsecs); -+#endif /* NEED_SPIDELAY */ -+} - - #include "spi-bitbang-txrx.h" - diff --git a/target/linux/generic/patches-3.3/862-gpio_spi_driver.patch b/target/linux/generic/patches-3.3/862-gpio_spi_driver.patch deleted file mode 100644 index 6cbea32a31..0000000000 --- a/target/linux/generic/patches-3.3/862-gpio_spi_driver.patch +++ /dev/null @@ -1,373 +0,0 @@ -THIS CODE IS DEPRECATED. - -Please use the new mainline SPI-GPIO driver, as of 2.6.29. - ---mb - - - ---- - drivers/spi/Kconfig | 9 + - drivers/spi/Makefile | 1 - drivers/spi/spi_gpio_old.c | 251 +++++++++++++++++++++++++++++++++++++++ - include/linux/spi/spi_gpio_old.h | 73 +++++++++++ - 4 files changed, 334 insertions(+) - ---- /dev/null -+++ b/include/linux/spi/spi_gpio_old.h -@@ -0,0 +1,73 @@ -+/* -+ * spi_gpio interface to platform code -+ * -+ * Copyright (c) 2008 Piotr Skamruk -+ * Copyright (c) 2008 Michael Buesch -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef _LINUX_SPI_SPI_GPIO -+#define _LINUX_SPI_SPI_GPIO -+ -+#include -+#include -+ -+ -+/** -+ * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device. -+ * -+ * This structure holds information about a GPIO-based SPI device. -+ * -+ * @pin_clk: The GPIO pin number of the CLOCK pin. -+ * -+ * @pin_miso: The GPIO pin number of the MISO pin. -+ * -+ * @pin_mosi: The GPIO pin number of the MOSI pin. -+ * -+ * @pin_cs: The GPIO pin number of the CHIPSELECT pin. -+ * -+ * @cs_activelow: If true, the chip is selected when the CS line is low. -+ * -+ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging. -+ * Note that doing no delay is not standards compliant, -+ * but it might be needed to speed up transfers on some -+ * slow embedded machines. -+ * -+ * @boardinfo_setup: This callback is called after the -+ * SPI master device was registered, but before the -+ * device is registered. -+ * @boardinfo_setup_data: Data argument passed to boardinfo_setup(). -+ */ -+struct spi_gpio_platform_data { -+ unsigned int pin_clk; -+ unsigned int pin_miso; -+ unsigned int pin_mosi; -+ unsigned int pin_cs; -+ bool cs_activelow; -+ bool no_spi_delay; -+ int (*boardinfo_setup)(struct spi_board_info *bi, -+ struct spi_master *master, -+ void *data); -+ void *boardinfo_setup_data; -+}; -+ -+/** -+ * SPI_GPIO_PLATDEV_NAME - The platform device name string. -+ * -+ * The name string that has to be used for platform_device_alloc -+ * when allocating a spi-gpio device. -+ */ -+#define SPI_GPIO_PLATDEV_NAME "spi-gpio" -+ -+/** -+ * spi_gpio_next_id - Get another platform device ID number. -+ * -+ * This returns the next platform device ID number that has to be used -+ * for platform_device_alloc. The ID is opaque and should not be used for -+ * anything else. -+ */ -+int spi_gpio_next_id(void); -+ -+#endif /* _LINUX_SPI_SPI_GPIO */ ---- /dev/null -+++ b/drivers/spi/spi_gpio_old.c -@@ -0,0 +1,251 @@ -+/* -+ * Bitbanging SPI bus driver using GPIO API -+ * -+ * Copyright (c) 2008 Piotr Skamruk -+ * Copyright (c) 2008 Michael Buesch -+ * -+ * based on spi_s3c2410_gpio.c -+ * Copyright (c) 2006 Ben Dooks -+ * Copyright (c) 2006 Simtec Electronics -+ * and on i2c-gpio.c -+ * Copyright (C) 2007 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+ -+struct spi_gpio { -+ struct spi_bitbang bitbang; -+ struct spi_gpio_platform_data *info; -+ struct platform_device *pdev; -+ struct spi_board_info bi; -+}; -+ -+ -+static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev) -+{ -+ return dev->controller_data; -+} -+ -+static inline void setsck(struct spi_device *dev, int val) -+{ -+ struct spi_gpio *sp = spidev_to_sg(dev); -+ gpio_set_value(sp->info->pin_clk, val ? 1 : 0); -+} -+ -+static inline void setmosi(struct spi_device *dev, int val) -+{ -+ struct spi_gpio *sp = spidev_to_sg(dev); -+ gpio_set_value(sp->info->pin_mosi, val ? 1 : 0); -+} -+ -+static inline u32 getmiso(struct spi_device *dev) -+{ -+ struct spi_gpio *sp = spidev_to_sg(dev); -+ return gpio_get_value(sp->info->pin_miso) ? 1 : 0; -+} -+ -+static inline void do_spidelay(struct spi_device *dev, unsigned nsecs) -+{ -+ struct spi_gpio *sp = spidev_to_sg(dev); -+ -+ if (!sp->info->no_spi_delay) -+ ndelay(nsecs); -+} -+ -+#define spidelay(nsecs) do { \ -+ /* Steal the spi_device pointer from our caller. \ -+ * The bitbang-API should probably get fixed here... */ \ -+ do_spidelay(spi, nsecs); \ -+ } while (0) -+ -+#define EXPAND_BITBANG_TXRX -+#include "spi-bitbang-txrx.h" -+ -+static u32 spi_gpio_txrx_mode0(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); -+} -+ -+static u32 spi_gpio_txrx_mode1(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); -+} -+ -+static u32 spi_gpio_txrx_mode2(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); -+} -+ -+static u32 spi_gpio_txrx_mode3(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); -+} -+ -+static void spi_gpio_chipselect(struct spi_device *dev, int on) -+{ -+ struct spi_gpio *sp = spidev_to_sg(dev); -+ -+ if (sp->info->cs_activelow) -+ on = !on; -+ gpio_set_value(sp->info->pin_cs, on ? 1 : 0); -+} -+ -+static int spi_gpio_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct spi_gpio_platform_data *pdata; -+ struct spi_gpio *sp; -+ struct spi_device *spidev; -+ int err; -+ -+ pdata = pdev->dev.platform_data; -+ if (!pdata) -+ return -ENXIO; -+ -+ err = -ENOMEM; -+ master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio)); -+ if (!master) -+ goto err_alloc_master; -+ -+ sp = spi_master_get_devdata(master); -+ platform_set_drvdata(pdev, sp); -+ sp->info = pdata; -+ -+ err = gpio_request(pdata->pin_clk, "spi_clock"); -+ if (err) -+ goto err_request_clk; -+ err = gpio_request(pdata->pin_mosi, "spi_mosi"); -+ if (err) -+ goto err_request_mosi; -+ err = gpio_request(pdata->pin_miso, "spi_miso"); -+ if (err) -+ goto err_request_miso; -+ err = gpio_request(pdata->pin_cs, "spi_cs"); -+ if (err) -+ goto err_request_cs; -+ -+ sp->bitbang.master = spi_master_get(master); -+ sp->bitbang.master->bus_num = -1; -+ sp->bitbang.master->num_chipselect = 1; -+ sp->bitbang.chipselect = spi_gpio_chipselect; -+ sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0; -+ sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1; -+ sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2; -+ sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3; -+ -+ gpio_direction_output(pdata->pin_clk, 0); -+ gpio_direction_output(pdata->pin_mosi, 0); -+ gpio_direction_output(pdata->pin_cs, -+ pdata->cs_activelow ? 1 : 0); -+ gpio_direction_input(pdata->pin_miso); -+ -+ err = spi_bitbang_start(&sp->bitbang); -+ if (err) -+ goto err_no_bitbang; -+ err = pdata->boardinfo_setup(&sp->bi, master, -+ pdata->boardinfo_setup_data); -+ if (err) -+ goto err_bi_setup; -+ sp->bi.controller_data = sp; -+ spidev = spi_new_device(master, &sp->bi); -+ if (!spidev) -+ goto err_new_dev; -+ -+ return 0; -+ -+err_new_dev: -+err_bi_setup: -+ spi_bitbang_stop(&sp->bitbang); -+err_no_bitbang: -+ spi_master_put(sp->bitbang.master); -+ gpio_free(pdata->pin_cs); -+err_request_cs: -+ gpio_free(pdata->pin_miso); -+err_request_miso: -+ gpio_free(pdata->pin_mosi); -+err_request_mosi: -+ gpio_free(pdata->pin_clk); -+err_request_clk: -+ kfree(master); -+ -+err_alloc_master: -+ return err; -+} -+ -+static int __devexit spi_gpio_remove(struct platform_device *pdev) -+{ -+ struct spi_gpio *sp; -+ struct spi_gpio_platform_data *pdata; -+ -+ pdata = pdev->dev.platform_data; -+ sp = platform_get_drvdata(pdev); -+ -+ gpio_free(pdata->pin_clk); -+ gpio_free(pdata->pin_mosi); -+ gpio_free(pdata->pin_miso); -+ gpio_free(pdata->pin_cs); -+ spi_bitbang_stop(&sp->bitbang); -+ spi_master_put(sp->bitbang.master); -+ -+ return 0; -+} -+ -+static struct platform_driver spi_gpio_driver = { -+ .driver = { -+ .name = SPI_GPIO_PLATDEV_NAME, -+ .owner = THIS_MODULE, -+ }, -+ .probe = spi_gpio_probe, -+ .remove = __devexit_p(spi_gpio_remove), -+}; -+ -+int spi_gpio_next_id(void) -+{ -+ static atomic_t counter = ATOMIC_INIT(-1); -+ -+ return atomic_inc_return(&counter); -+} -+EXPORT_SYMBOL(spi_gpio_next_id); -+ -+static int __init spi_gpio_init(void) -+{ -+ int err; -+ -+ err = platform_driver_register(&spi_gpio_driver); -+ if (err) -+ printk(KERN_ERR "spi-gpio: register failed: %d\n", err); -+ -+ return err; -+} -+module_init(spi_gpio_init); -+ -+static void __exit spi_gpio_exit(void) -+{ -+ platform_driver_unregister(&spi_gpio_driver); -+} -+module_exit(spi_gpio_exit); -+ -+MODULE_AUTHOR("Piot Skamruk "); -+MODULE_AUTHOR("Michael Buesch"); -+MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver"); -+MODULE_LICENSE("GPL v2"); ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -154,6 +154,15 @@ config SPI_GPIO - GPIO operations, you should be able to leverage that for better - speed with a custom version of this driver; see the source code. - -+config SPI_GPIO_OLD -+ tristate "Old GPIO API based bitbanging SPI controller (DEPRECATED)" -+ depends on SPI_MASTER && GENERIC_GPIO -+ select SPI_BITBANG -+ help -+ This code is deprecated. Please use the new mainline SPI-GPIO driver. -+ -+ If unsure, say N. -+ - config SPI_IMX - tristate "Freescale i.MX SPI controllers" - depends on ARCH_MXC ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-li - obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o - obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o - obj-$(CONFIG_SPI_GPIO) += spi-gpio.o -+obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o - obj-$(CONFIG_SPI_IMX) += spi-imx.o - obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o - obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o diff --git a/target/linux/generic/patches-3.3/863-gpiommc.patch b/target/linux/generic/patches-3.3/863-gpiommc.patch deleted file mode 100644 index 5e5325f197..0000000000 --- a/target/linux/generic/patches-3.3/863-gpiommc.patch +++ /dev/null @@ -1,844 +0,0 @@ ---- /dev/null -+++ b/drivers/mmc/host/gpiommc.c -@@ -0,0 +1,609 @@ -+/* -+ * Driver an MMC/SD card on a bitbanging GPIO SPI bus. -+ * This module hooks up the mmc_spi and spi_gpio modules and also -+ * provides a configfs interface. -+ * -+ * Copyright 2008 Michael Buesch -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+ -+#define PFX "gpio-mmc: " -+ -+ -+struct gpiommc_device { -+ struct platform_device *pdev; -+ struct platform_device *spi_pdev; -+ struct spi_board_info boardinfo; -+}; -+ -+ -+MODULE_DESCRIPTION("GPIO based MMC driver"); -+MODULE_AUTHOR("Michael Buesch"); -+MODULE_LICENSE("GPL"); -+ -+ -+static int gpiommc_boardinfo_setup(struct spi_board_info *bi, -+ struct spi_master *master, -+ void *data) -+{ -+ struct gpiommc_device *d = data; -+ struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data; -+ -+ /* Bind the SPI master to the MMC-SPI host driver. */ -+ strlcpy(bi->modalias, "mmc_spi", sizeof(bi->modalias)); -+ -+ bi->max_speed_hz = pdata->max_bus_speed; -+ bi->bus_num = master->bus_num; -+ bi->mode = pdata->mode; -+ -+ return 0; -+} -+ -+static int gpiommc_probe(struct platform_device *pdev) -+{ -+ struct gpiommc_platform_data *mmc_pdata = pdev->dev.platform_data; -+ struct spi_gpio_platform_data spi_pdata; -+ struct gpiommc_device *d; -+ int err; -+ -+ err = -ENXIO; -+ if (!mmc_pdata) -+ goto error; -+ -+#ifdef CONFIG_MMC_SPI_MODULE -+ err = request_module("mmc_spi"); -+ if (err) { -+ printk(KERN_WARNING PFX -+ "Failed to request mmc_spi module.\n"); -+ } -+#endif /* CONFIG_MMC_SPI_MODULE */ -+ -+ /* Allocate the GPIO-MMC device */ -+ err = -ENOMEM; -+ d = kzalloc(sizeof(*d), GFP_KERNEL); -+ if (!d) -+ goto error; -+ d->pdev = pdev; -+ -+ /* Create the SPI-GPIO device */ -+ d->spi_pdev = platform_device_alloc(SPI_GPIO_PLATDEV_NAME, -+ spi_gpio_next_id()); -+ if (!d->spi_pdev) -+ goto err_free_d; -+ -+ memset(&spi_pdata, 0, sizeof(spi_pdata)); -+ spi_pdata.pin_clk = mmc_pdata->pins.gpio_clk; -+ spi_pdata.pin_miso = mmc_pdata->pins.gpio_do; -+ spi_pdata.pin_mosi = mmc_pdata->pins.gpio_di; -+ spi_pdata.pin_cs = mmc_pdata->pins.gpio_cs; -+ spi_pdata.cs_activelow = mmc_pdata->pins.cs_activelow; -+ spi_pdata.no_spi_delay = mmc_pdata->no_spi_delay; -+ spi_pdata.boardinfo_setup = gpiommc_boardinfo_setup; -+ spi_pdata.boardinfo_setup_data = d; -+ -+ err = platform_device_add_data(d->spi_pdev, &spi_pdata, -+ sizeof(spi_pdata)); -+ if (err) -+ goto err_free_pdev; -+ err = platform_device_add(d->spi_pdev); -+ if (err) -+ goto err_free_pdata; -+ platform_set_drvdata(pdev, d); -+ -+ printk(KERN_INFO PFX "MMC-Card \"%s\" " -+ "attached to GPIO pins di=%u, do=%u, clk=%u, cs=%u\n", -+ mmc_pdata->name, mmc_pdata->pins.gpio_di, -+ mmc_pdata->pins.gpio_do, -+ mmc_pdata->pins.gpio_clk, -+ mmc_pdata->pins.gpio_cs); -+ -+ return 0; -+ -+err_free_pdata: -+ kfree(d->spi_pdev->dev.platform_data); -+ d->spi_pdev->dev.platform_data = NULL; -+err_free_pdev: -+ platform_device_put(d->spi_pdev); -+err_free_d: -+ kfree(d); -+error: -+ return err; -+} -+ -+static int gpiommc_remove(struct platform_device *pdev) -+{ -+ struct gpiommc_device *d = platform_get_drvdata(pdev); -+ struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data; -+ -+ platform_device_unregister(d->spi_pdev); -+ printk(KERN_INFO PFX "GPIO based MMC-Card \"%s\" removed\n", -+ pdata->name); -+ platform_device_put(d->spi_pdev); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_GPIOMMC_CONFIGFS -+ -+/* A device that was created through configfs */ -+struct gpiommc_configfs_device { -+ struct config_item item; -+ /* The platform device, after registration. */ -+ struct platform_device *pdev; -+ /* The configuration */ -+ struct gpiommc_platform_data pdata; -+}; -+ -+#define GPIO_INVALID -1 -+ -+static inline bool gpiommc_is_registered(struct gpiommc_configfs_device *dev) -+{ -+ return (dev->pdev != NULL); -+} -+ -+static inline struct gpiommc_configfs_device *ci_to_gpiommc(struct config_item *item) -+{ -+ return item ? container_of(item, struct gpiommc_configfs_device, item) : NULL; -+} -+ -+static struct configfs_attribute gpiommc_attr_DI = { -+ .ca_owner = THIS_MODULE, -+ .ca_name = "gpio_data_in", -+ .ca_mode = S_IRUGO | S_IWUSR, -+}; -+ -+static struct configfs_attribute gpiommc_attr_DO = { -+ .ca_owner = THIS_MODULE, -+ .ca_name = "gpio_data_out", -+ .ca_mode = S_IRUGO | S_IWUSR, -+}; -+ -+static struct configfs_attribute gpiommc_attr_CLK = { -+ .ca_owner = THIS_MODULE, -+ .ca_name = "gpio_clock", -+ .ca_mode = S_IRUGO | S_IWUSR, -+}; -+ -+static struct configfs_attribute gpiommc_attr_CS = { -+ .ca_owner = THIS_MODULE, -+ .ca_name = "gpio_chipselect", -+ .ca_mode = S_IRUGO | S_IWUSR, -+}; -+ -+static struct configfs_attribute gpiommc_attr_CS_activelow = { -+ .ca_owner = THIS_MODULE, -+ .ca_name = "gpio_chipselect_activelow", -+ .ca_mode = S_IRUGO | S_IWUSR, -+}; -+ -+static struct configfs_attribute gpiommc_attr_spimode = { -+ .ca_owner = THIS_MODULE, -+ .ca_name = "spi_mode", -+ .ca_mode = S_IRUGO | S_IWUSR, -+}; -+ -+static struct configfs_attribute gpiommc_attr_spidelay = { -+ .ca_owner = THIS_MODULE, -+ .ca_name = "spi_delay", -+ .ca_mode = S_IRUGO | S_IWUSR, -+}; -+ -+static struct configfs_attribute gpiommc_attr_max_bus_speed = { -+ .ca_owner = THIS_MODULE, -+ .ca_name = "max_bus_speed", -+ .ca_mode = S_IRUGO | S_IWUSR, -+}; -+ -+static struct configfs_attribute gpiommc_attr_register = { -+ .ca_owner = THIS_MODULE, -+ .ca_name = "register", -+ .ca_mode = S_IRUGO | S_IWUSR, -+}; -+ -+static struct configfs_attribute *gpiommc_config_attrs[] = { -+ &gpiommc_attr_DI, -+ &gpiommc_attr_DO, -+ &gpiommc_attr_CLK, -+ &gpiommc_attr_CS, -+ &gpiommc_attr_CS_activelow, -+ &gpiommc_attr_spimode, -+ &gpiommc_attr_spidelay, -+ &gpiommc_attr_max_bus_speed, -+ &gpiommc_attr_register, -+ NULL, -+}; -+ -+static ssize_t gpiommc_config_attr_show(struct config_item *item, -+ struct configfs_attribute *attr, -+ char *page) -+{ -+ struct gpiommc_configfs_device *dev = ci_to_gpiommc(item); -+ ssize_t count = 0; -+ unsigned int gpio; -+ int err = 0; -+ -+ if (attr == &gpiommc_attr_DI) { -+ gpio = dev->pdata.pins.gpio_di; -+ if (gpio == GPIO_INVALID) -+ count = snprintf(page, PAGE_SIZE, "not configured\n"); -+ else -+ count = snprintf(page, PAGE_SIZE, "%u\n", gpio); -+ goto out; -+ } -+ if (attr == &gpiommc_attr_DO) { -+ gpio = dev->pdata.pins.gpio_do; -+ if (gpio == GPIO_INVALID) -+ count = snprintf(page, PAGE_SIZE, "not configured\n"); -+ else -+ count = snprintf(page, PAGE_SIZE, "%u\n", gpio); -+ goto out; -+ } -+ if (attr == &gpiommc_attr_CLK) { -+ gpio = dev->pdata.pins.gpio_clk; -+ if (gpio == GPIO_INVALID) -+ count = snprintf(page, PAGE_SIZE, "not configured\n"); -+ else -+ count = snprintf(page, PAGE_SIZE, "%u\n", gpio); -+ goto out; -+ } -+ if (attr == &gpiommc_attr_CS) { -+ gpio = dev->pdata.pins.gpio_cs; -+ if (gpio == GPIO_INVALID) -+ count = snprintf(page, PAGE_SIZE, "not configured\n"); -+ else -+ count = snprintf(page, PAGE_SIZE, "%u\n", gpio); -+ goto out; -+ } -+ if (attr == &gpiommc_attr_CS_activelow) { -+ count = snprintf(page, PAGE_SIZE, "%u\n", -+ dev->pdata.pins.cs_activelow); -+ goto out; -+ } -+ if (attr == &gpiommc_attr_spimode) { -+ count = snprintf(page, PAGE_SIZE, "%u\n", -+ dev->pdata.mode); -+ goto out; -+ } -+ if (attr == &gpiommc_attr_spidelay) { -+ count = snprintf(page, PAGE_SIZE, "%u\n", -+ !dev->pdata.no_spi_delay); -+ goto out; -+ } -+ if (attr == &gpiommc_attr_max_bus_speed) { -+ count = snprintf(page, PAGE_SIZE, "%u\n", -+ dev->pdata.max_bus_speed); -+ goto out; -+ } -+ if (attr == &gpiommc_attr_register) { -+ count = snprintf(page, PAGE_SIZE, "%u\n", -+ gpiommc_is_registered(dev)); -+ goto out; -+ } -+ WARN_ON(1); -+ err = -ENOSYS; -+out: -+ return err ? err : count; -+} -+ -+static int gpiommc_do_register(struct gpiommc_configfs_device *dev, -+ const char *name) -+{ -+ int err; -+ -+ if (gpiommc_is_registered(dev)) -+ return 0; -+ -+ if (!gpio_is_valid(dev->pdata.pins.gpio_di) || -+ !gpio_is_valid(dev->pdata.pins.gpio_do) || -+ !gpio_is_valid(dev->pdata.pins.gpio_clk) || -+ !gpio_is_valid(dev->pdata.pins.gpio_cs)) { -+ printk(KERN_ERR PFX -+ "configfs: Invalid GPIO pin number(s)\n"); -+ return -EINVAL; -+ } -+ -+ strlcpy(dev->pdata.name, name, -+ sizeof(dev->pdata.name)); -+ -+ dev->pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, -+ gpiommc_next_id()); -+ if (!dev->pdev) -+ return -ENOMEM; -+ err = platform_device_add_data(dev->pdev, &dev->pdata, -+ sizeof(dev->pdata)); -+ if (err) { -+ platform_device_put(dev->pdev); -+ return err; -+ } -+ err = platform_device_add(dev->pdev); -+ if (err) { -+ platform_device_put(dev->pdev); -+ return err; -+ } -+ -+ return 0; -+} -+ -+static void gpiommc_do_unregister(struct gpiommc_configfs_device *dev) -+{ -+ if (!gpiommc_is_registered(dev)) -+ return; -+ -+ platform_device_unregister(dev->pdev); -+ dev->pdev = NULL; -+} -+ -+static ssize_t gpiommc_config_attr_store(struct config_item *item, -+ struct configfs_attribute *attr, -+ const char *page, size_t count) -+{ -+ struct gpiommc_configfs_device *dev = ci_to_gpiommc(item); -+ int err = -EINVAL; -+ unsigned long data; -+ -+ if (attr == &gpiommc_attr_register) { -+ err = kstrtoul(page, 10, &data); -+ if (err) -+ goto out; -+ err = -EINVAL; -+ if (data == 1) -+ err = gpiommc_do_register(dev, item->ci_name); -+ if (data == 0) { -+ gpiommc_do_unregister(dev); -+ err = 0; -+ } -+ goto out; -+ } -+ -+ if (gpiommc_is_registered(dev)) { -+ /* The rest of the config parameters can only be set -+ * as long as the device is not registered, yet. */ -+ err = -EBUSY; -+ goto out; -+ } -+ -+ if (attr == &gpiommc_attr_DI) { -+ err = kstrtoul(page, 10, &data); -+ if (err) -+ goto out; -+ err = -EINVAL; -+ if (!gpio_is_valid(data)) -+ goto out; -+ dev->pdata.pins.gpio_di = data; -+ err = 0; -+ goto out; -+ } -+ if (attr == &gpiommc_attr_DO) { -+ err = kstrtoul(page, 10, &data); -+ if (err) -+ goto out; -+ err = -EINVAL; -+ if (!gpio_is_valid(data)) -+ goto out; -+ dev->pdata.pins.gpio_do = data; -+ err = 0; -+ goto out; -+ } -+ if (attr == &gpiommc_attr_CLK) { -+ err = kstrtoul(page, 10, &data); -+ if (err) -+ goto out; -+ err = -EINVAL; -+ if (!gpio_is_valid(data)) -+ goto out; -+ dev->pdata.pins.gpio_clk = data; -+ err = 0; -+ goto out; -+ } -+ if (attr == &gpiommc_attr_CS) { -+ err = kstrtoul(page, 10, &data); -+ if (err) -+ goto out; -+ err = -EINVAL; -+ if (!gpio_is_valid(data)) -+ goto out; -+ dev->pdata.pins.gpio_cs = data; -+ err = 0; -+ goto out; -+ } -+ if (attr == &gpiommc_attr_CS_activelow) { -+ err = kstrtoul(page, 10, &data); -+ if (err) -+ goto out; -+ err = -EINVAL; -+ if (data != 0 && data != 1) -+ goto out; -+ dev->pdata.pins.cs_activelow = data; -+ err = 0; -+ goto out; -+ } -+ if (attr == &gpiommc_attr_spimode) { -+ err = kstrtoul(page, 10, &data); -+ if (err) -+ goto out; -+ err = -EINVAL; -+ switch (data) { -+ case 0: -+ dev->pdata.mode = SPI_MODE_0; -+ break; -+ case 1: -+ dev->pdata.mode = SPI_MODE_1; -+ break; -+ case 2: -+ dev->pdata.mode = SPI_MODE_2; -+ break; -+ case 3: -+ dev->pdata.mode = SPI_MODE_3; -+ break; -+ default: -+ goto out; -+ } -+ err = 0; -+ goto out; -+ } -+ if (attr == &gpiommc_attr_spidelay) { -+ err = kstrtoul(page, 10, &data); -+ if (err) -+ goto out; -+ err = -EINVAL; -+ if (data != 0 && data != 1) -+ goto out; -+ dev->pdata.no_spi_delay = !data; -+ err = 0; -+ goto out; -+ } -+ if (attr == &gpiommc_attr_max_bus_speed) { -+ err = kstrtoul(page, 10, &data); -+ if (err) -+ goto out; -+ err = -EINVAL; -+ if (data > UINT_MAX) -+ goto out; -+ dev->pdata.max_bus_speed = data; -+ err = 0; -+ goto out; -+ } -+ WARN_ON(1); -+ err = -ENOSYS; -+out: -+ return err ? err : count; -+} -+ -+static void gpiommc_config_item_release(struct config_item *item) -+{ -+ struct gpiommc_configfs_device *dev = ci_to_gpiommc(item); -+ -+ kfree(dev); -+} -+ -+static struct configfs_item_operations gpiommc_config_item_ops = { -+ .release = gpiommc_config_item_release, -+ .show_attribute = gpiommc_config_attr_show, -+ .store_attribute = gpiommc_config_attr_store, -+}; -+ -+static struct config_item_type gpiommc_dev_ci_type = { -+ .ct_item_ops = &gpiommc_config_item_ops, -+ .ct_attrs = gpiommc_config_attrs, -+ .ct_owner = THIS_MODULE, -+}; -+ -+static struct config_item *gpiommc_make_item(struct config_group *group, -+ const char *name) -+{ -+ struct gpiommc_configfs_device *dev; -+ -+ if (strlen(name) > GPIOMMC_MAX_NAMELEN) { -+ printk(KERN_ERR PFX "configfs: device name too long\n"); -+ return NULL; -+ } -+ -+ dev = kzalloc(sizeof(*dev), GFP_KERNEL); -+ if (!dev) -+ return NULL; -+ -+ config_item_init_type_name(&dev->item, name, -+ &gpiommc_dev_ci_type); -+ -+ /* Assign default configuration */ -+ dev->pdata.pins.gpio_di = GPIO_INVALID; -+ dev->pdata.pins.gpio_do = GPIO_INVALID; -+ dev->pdata.pins.gpio_clk = GPIO_INVALID; -+ dev->pdata.pins.gpio_cs = GPIO_INVALID; -+ dev->pdata.pins.cs_activelow = 1; -+ dev->pdata.mode = SPI_MODE_0; -+ dev->pdata.no_spi_delay = 0; -+ dev->pdata.max_bus_speed = 5000000; /* 5 MHz */ -+ -+ return &(dev->item); -+} -+ -+static void gpiommc_drop_item(struct config_group *group, -+ struct config_item *item) -+{ -+ struct gpiommc_configfs_device *dev = ci_to_gpiommc(item); -+ -+ gpiommc_do_unregister(dev); -+ kfree(dev); -+} -+ -+static struct configfs_group_operations gpiommc_ct_group_ops = { -+ .make_item = gpiommc_make_item, -+ .drop_item = gpiommc_drop_item, -+}; -+ -+static struct config_item_type gpiommc_ci_type = { -+ .ct_group_ops = &gpiommc_ct_group_ops, -+ .ct_owner = THIS_MODULE, -+}; -+ -+static struct configfs_subsystem gpiommc_subsys = { -+ .su_group = { -+ .cg_item = { -+ .ci_namebuf = GPIOMMC_PLATDEV_NAME, -+ .ci_type = &gpiommc_ci_type, -+ }, -+ }, -+ .su_mutex = __MUTEX_INITIALIZER(gpiommc_subsys.su_mutex), -+}; -+ -+#endif /* CONFIG_GPIOMMC_CONFIGFS */ -+ -+static struct platform_driver gpiommc_plat_driver = { -+ .probe = gpiommc_probe, -+ .remove = gpiommc_remove, -+ .driver = { -+ .name = GPIOMMC_PLATDEV_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+int gpiommc_next_id(void) -+{ -+ static atomic_t counter = ATOMIC_INIT(-1); -+ -+ return atomic_inc_return(&counter); -+} -+EXPORT_SYMBOL(gpiommc_next_id); -+ -+static int __init gpiommc_modinit(void) -+{ -+ int err; -+ -+ err = platform_driver_register(&gpiommc_plat_driver); -+ if (err) -+ return err; -+ -+#ifdef CONFIG_GPIOMMC_CONFIGFS -+ config_group_init(&gpiommc_subsys.su_group); -+ err = configfs_register_subsystem(&gpiommc_subsys); -+ if (err) { -+ platform_driver_unregister(&gpiommc_plat_driver); -+ return err; -+ } -+#endif /* CONFIG_GPIOMMC_CONFIGFS */ -+ -+ return 0; -+} -+module_init(gpiommc_modinit); -+ -+static void __exit gpiommc_modexit(void) -+{ -+#ifdef CONFIG_GPIOMMC_CONFIGFS -+ configfs_unregister_subsystem(&gpiommc_subsys); -+#endif -+ platform_driver_unregister(&gpiommc_plat_driver); -+} -+module_exit(gpiommc_modexit); ---- a/drivers/mmc/host/Kconfig -+++ b/drivers/mmc/host/Kconfig -@@ -474,6 +474,31 @@ config MMC_SDHI - This provides support for the SDHI SD/SDIO controller found in - SuperH and ARM SH-Mobile SoCs - -+config GPIOMMC -+ tristate "MMC/SD over GPIO-based SPI" -+ depends on MMC && MMC_SPI && SPI_GPIO_OLD -+ help -+ This driver hooks up the mmc_spi and spi_gpio modules so that -+ MMC/SD cards can be used on a GPIO based bus by bitbanging -+ the SPI protocol in software. -+ -+ This driver provides a configfs interface to dynamically create -+ and destroy GPIO-based MMC/SD card devices. It also provides -+ a platform device interface API. -+ See Documentation/gpiommc.txt for details. -+ -+ The module will be called gpiommc. -+ -+ If unsure, say N. -+ -+config GPIOMMC_CONFIGFS -+ bool -+ depends on GPIOMMC && CONFIGFS_FS -+ default y -+ help -+ This option automatically enables configfs support for gpiommc -+ if configfs is available. -+ - config MMC_CB710 - tristate "ENE CB710 MMC/SD Interface support" - depends on PCI ---- a/drivers/mmc/host/Makefile -+++ b/drivers/mmc/host/Makefile -@@ -37,6 +37,7 @@ tmio_mmc_core-$(subst m,y,$(CONFIG_MMC_S - obj-$(CONFIG_MMC_SDHI) += sh_mobile_sdhi.o - obj-$(CONFIG_MMC_CB710) += cb710-mmc.o - obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o -+obj-$(CONFIG_GPIOMMC) += gpiommc.o - obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o - obj-$(CONFIG_MMC_DW) += dw_mmc.o - obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o ---- /dev/null -+++ b/include/linux/mmc/gpiommc.h -@@ -0,0 +1,71 @@ -+/* -+ * Device driver for MMC/SD cards driven over a GPIO bus. -+ * -+ * Copyright (c) 2008 Michael Buesch -+ * -+ * Licensed under the GNU/GPL version 2. -+ */ -+#ifndef LINUX_GPIOMMC_H_ -+#define LINUX_GPIOMMC_H_ -+ -+#include -+ -+ -+#define GPIOMMC_MAX_NAMELEN 15 -+#define GPIOMMC_MAX_NAMELEN_STR __stringify(GPIOMMC_MAX_NAMELEN) -+ -+/** -+ * struct gpiommc_pins - Hardware pin assignments -+ * -+ * @gpio_di: The GPIO number of the DATA IN pin -+ * @gpio_do: The GPIO number of the DATA OUT pin -+ * @gpio_clk: The GPIO number of the CLOCK pin -+ * @gpio_cs: The GPIO number of the CHIPSELECT pin -+ * @cs_activelow: If true, the chip is considered selected if @gpio_cs is low. -+ */ -+struct gpiommc_pins { -+ unsigned int gpio_di; -+ unsigned int gpio_do; -+ unsigned int gpio_clk; -+ unsigned int gpio_cs; -+ bool cs_activelow; -+}; -+ -+/** -+ * struct gpiommc_platform_data - Platform data for a MMC-over-SPI-GPIO device. -+ * -+ * @name: The unique name string of the device. -+ * @pins: The hardware pin assignments. -+ * @mode: The hardware mode. This is either SPI_MODE_0, -+ * SPI_MODE_1, SPI_MODE_2 or SPI_MODE_3. See the SPI documentation. -+ * @no_spi_delay: Do not use delays in the lowlevel SPI bitbanging code. -+ * This is not standards compliant, but may be required for some -+ * embedded machines to gain reasonable speed. -+ * @max_bus_speed: The maximum speed of the SPI bus, in Hertz. -+ */ -+struct gpiommc_platform_data { -+ char name[GPIOMMC_MAX_NAMELEN + 1]; -+ struct gpiommc_pins pins; -+ u8 mode; -+ bool no_spi_delay; -+ unsigned int max_bus_speed; -+}; -+ -+/** -+ * GPIOMMC_PLATDEV_NAME - The platform device name string. -+ * -+ * The name string that has to be used for platform_device_alloc -+ * when allocating a gpiommc device. -+ */ -+#define GPIOMMC_PLATDEV_NAME "gpiommc" -+ -+/** -+ * gpiommc_next_id - Get another platform device ID number. -+ * -+ * This returns the next platform device ID number that has to be used -+ * for platform_device_alloc. The ID is opaque and should not be used for -+ * anything else. -+ */ -+int gpiommc_next_id(void); -+ -+#endif /* LINUX_GPIOMMC_H_ */ ---- /dev/null -+++ b/Documentation/gpiommc.txt -@@ -0,0 +1,97 @@ -+GPIOMMC - Driver for an MMC/SD card on a bitbanging GPIO SPI bus -+================================================================ -+ -+The gpiommc module hooks up the mmc_spi and spi_gpio modules for running an -+MMC or SD card on GPIO pins. -+ -+Two interfaces for registering a new MMC/SD card device are provided: -+A static platform-device based mechanism and a dynamic configfs based interface. -+ -+ -+Registering devices via platform-device -+======================================= -+ -+The platform-device interface is used for registering MMC/SD devices that are -+part of the hardware platform. This is most useful only for embedded machines -+with MMC/SD devices statically connected to the platform GPIO bus. -+ -+The data structures are declared in . -+ -+To register a new device, define an instance of struct gpiommc_platform_data. -+This structure holds any information about how the device is hooked up to the -+GPIO pins and what hardware modes the device supports. See the docbook-style -+documentation in the header file for more information on the struct fields. -+ -+Then allocate a new instance of a platform device by doing: -+ -+ pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, gpiommc_next_id()); -+ -+This will allocate the platform device data structures and hook it up to the -+gpiommc driver. -+Then add the gpiommc_platform_data to the platform device. -+ -+ err = platform_device_add_data(pdev, pdata, sizeof(struct gpiommc_platform_data)); -+ -+You may free the local instance of struct gpiommc_platform_data now. (So the -+struct may be allocated on the stack, too). -+Now simply register the platform device. -+ -+ err = platform_device_add(pdev); -+ -+Done. The gpiommc probe routine will be invoked now and you should see a kernel -+log message for the added device. -+ -+ -+Registering devices via configfs -+================================ -+ -+MMC/SD cards connected via GPIO often are a pretty dynamic thing, as for example -+selfmade hacks for soldering an MMC/SD card to standard GPIO pins on embedded -+hardware are a common situation. -+So we provide a dynamic interface to conveniently handle adding and removing -+devices from userspace, without the need to recompile the kernel. -+ -+The "gpiommc" subdirectory at the configfs mountpoint is used for handling -+the dynamic configuration. -+ -+To create a new device, it must first be allocated with mkdir. -+The following command will allocate a device named "my_mmc": -+ mkdir /config/gpiommc/my_mmc -+ -+There are several configuration files available in the new -+/config/gpiommc/my_mmc/ directory: -+ -+gpio_data_in = The SPI data-IN GPIO pin number. -+gpio_data_out = The SPI data-OUT GPIO pin number. -+gpio_clock = The SPI Clock GPIO pin number. -+gpio_chipselect = The SPI Chipselect GPIO pin number. -+gpio_chipselect_activelow = Boolean. If 0, Chipselect is active-HIGH. -+ If 1, Chipselect is active-LOW. -+spi_mode = The SPI data mode. Can be 0-3. -+spi_delay = Enable all delays in the lowlevel bitbanging. -+max_bus_speed = The maximum SPI bus speed. In Hertz. -+ -+register = Not a configuration parameter. -+ Used to register the configured card -+ with the kernel. -+ -+The device must first get configured and then registered by writing "1" to -+the "register" file. -+The configuration parameters "gpio_data_in", "gpio_data_out", "gpio_clock" -+and "gpio_chipselect" are essential and _must_ be configured before writing -+"1" to the "register" file. The registration will fail, otherwise. -+ -+The default values for the other parameters are: -+gpio_chipselect_activelow = 1 (CS active-LOW) -+spi_mode = 0 (SPI_MODE_0) -+spi_delay = 1 (enabled) -+max_bus_speed = 5000000 (5 Mhz) -+ -+Configuration values can not be changed after registration. To unregister -+the device, write a "0" to the "register" file. The configuration can be -+changed again after unregistering. -+ -+To completely remove the device, simply rmdir the directory -+(/config/gpiommc/my_mmc in this example). -+There's no need to first unregister the device before removing it. That will -+be done automatically. ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -3045,6 +3045,11 @@ L: linuxppc-dev@lists.ozlabs.org - S: Odd Fixes - F: drivers/tty/hvc/ - -+GPIOMMC DRIVER -+P: Michael Buesch -+M: mb@bu3sch.de -+S: Maintained -+ - HARDWARE MONITORING - M: Jean Delvare - M: Guenter Roeck diff --git a/target/linux/generic/patches-3.3/864-gpiommc_configfs_locking.patch b/target/linux/generic/patches-3.3/864-gpiommc_configfs_locking.patch deleted file mode 100644 index 92815d91f4..0000000000 --- a/target/linux/generic/patches-3.3/864-gpiommc_configfs_locking.patch +++ /dev/null @@ -1,58 +0,0 @@ -The gpiommc configfs context structure needs locking, as configfs -does not lock access between files. - ---- a/drivers/mmc/host/gpiommc.c -+++ b/drivers/mmc/host/gpiommc.c -@@ -144,6 +144,8 @@ struct gpiommc_configfs_device { - struct platform_device *pdev; - /* The configuration */ - struct gpiommc_platform_data pdata; -+ /* Mutex to protect this structure */ -+ struct mutex mutex; - }; - - #define GPIO_INVALID -1 -@@ -234,6 +236,8 @@ static ssize_t gpiommc_config_attr_show( - unsigned int gpio; - int err = 0; - -+ mutex_lock(&dev->mutex); -+ - if (attr == &gpiommc_attr_DI) { - gpio = dev->pdata.pins.gpio_di; - if (gpio == GPIO_INVALID) -@@ -294,6 +298,8 @@ static ssize_t gpiommc_config_attr_show( - WARN_ON(1); - err = -ENOSYS; - out: -+ mutex_unlock(&dev->mutex); -+ - return err ? err : count; - } - -@@ -353,6 +359,8 @@ static ssize_t gpiommc_config_attr_store - int err = -EINVAL; - unsigned long data; - -+ mutex_lock(&dev->mutex); -+ - if (attr == &gpiommc_attr_register) { - err = kstrtoul(page, 10, &data); - if (err) -@@ -478,6 +486,8 @@ static ssize_t gpiommc_config_attr_store - WARN_ON(1); - err = -ENOSYS; - out: -+ mutex_unlock(&dev->mutex); -+ - return err ? err : count; - } - -@@ -514,6 +524,7 @@ static struct config_item *gpiommc_make_ - if (!dev) - return NULL; - -+ mutex_init(&dev->mutex); - config_item_init_type_name(&dev->item, name, - &gpiommc_dev_ci_type); - diff --git a/target/linux/generic/patches-3.3/870-hifn795x_byteswap.patch b/target/linux/generic/patches-3.3/870-hifn795x_byteswap.patch deleted file mode 100644 index 3a37c951ec..0000000000 --- a/target/linux/generic/patches-3.3/870-hifn795x_byteswap.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- a/drivers/crypto/hifn_795x.c -+++ b/drivers/crypto/hifn_795x.c -@@ -682,12 +682,12 @@ static inline u32 hifn_read_1(struct hif - - static inline void hifn_write_0(struct hifn_device *dev, u32 reg, u32 val) - { -- writel((__force u32)cpu_to_le32(val), dev->bar[0] + reg); -+ writel(val, dev->bar[0] + reg); - } - - static inline void hifn_write_1(struct hifn_device *dev, u32 reg, u32 val) - { -- writel((__force u32)cpu_to_le32(val), dev->bar[1] + reg); -+ writel(val, dev->bar[1] + reg); - } - - static void hifn_wait_puc(struct hifn_device *dev) diff --git a/target/linux/generic/patches-3.3/880-gateworks_system_controller.patch b/target/linux/generic/patches-3.3/880-gateworks_system_controller.patch deleted file mode 100644 index d9a64810d9..0000000000 --- a/target/linux/generic/patches-3.3/880-gateworks_system_controller.patch +++ /dev/null @@ -1,339 +0,0 @@ ---- a/drivers/hwmon/Kconfig -+++ b/drivers/hwmon/Kconfig -@@ -423,6 +423,15 @@ config SENSORS_GL520SM - This driver can also be built as a module. If so, the module - will be called gl520sm. - -+config SENSORS_GSC -+ tristate "Gateworks System Controller" -+ depends on I2C -+ help -+ If you say yes here you get support for the Gateworks System Controller. -+ -+ This driver can also be built as a module. If so, the module -+ will be called gsc. -+ - config SENSORS_GPIO_FAN - tristate "GPIO fan" - depends on GENERIC_GPIO ---- a/drivers/hwmon/Makefile -+++ b/drivers/hwmon/Makefile -@@ -125,6 +125,7 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l7 - obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o - obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o - obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o -+obj-$(CONFIG_SENSORS_GSC) += gsc.o - - obj-$(CONFIG_PMBUS) += pmbus/ - ---- /dev/null -+++ b/drivers/hwmon/gsc.c -@@ -0,0 +1,308 @@ -+/* -+ * A hwmon driver for the Gateworks System Controller -+ * Copyright (C) 2009 Gateworks Corporation -+ * -+ * Author: Chris Lang -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License, -+ * as published by the Free Software Foundation - version 2. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define DRV_VERSION "0.2" -+ -+enum chips { gsp }; -+ -+/* AD7418 registers */ -+#define GSP_REG_TEMP_IN 0x00 -+#define GSP_REG_VIN 0x02 -+#define GSP_REG_3P3 0x05 -+#define GSP_REG_BAT 0x08 -+#define GSP_REG_5P0 0x0b -+#define GSP_REG_CORE 0x0e -+#define GSP_REG_CPU1 0x11 -+#define GSP_REG_CPU2 0x14 -+#define GSP_REG_DRAM 0x17 -+#define GSP_REG_EXT_BAT 0x1a -+#define GSP_REG_IO1 0x1d -+#define GSP_REG_IO2 0x20 -+#define GSP_REG_PCIE 0x23 -+#define GSP_REG_CURRENT 0x26 -+#define GSP_FAN_0 0x2C -+#define GSP_FAN_1 0x2E -+#define GSP_FAN_2 0x30 -+#define GSP_FAN_3 0x32 -+#define GSP_FAN_4 0x34 -+#define GSP_FAN_5 0x36 -+ -+struct gsp_sensor_info { -+ const char* name; -+ int reg; -+}; -+ -+static const struct gsp_sensor_info gsp_sensors[] = { -+ {"temp", GSP_REG_TEMP_IN}, -+ {"vin", GSP_REG_VIN}, -+ {"3p3", GSP_REG_3P3}, -+ {"bat", GSP_REG_BAT}, -+ {"5p0", GSP_REG_5P0}, -+ {"core", GSP_REG_CORE}, -+ {"cpu1", GSP_REG_CPU1}, -+ {"cpu2", GSP_REG_CPU2}, -+ {"dram", GSP_REG_DRAM}, -+ {"ext_bat", GSP_REG_EXT_BAT}, -+ {"io1", GSP_REG_IO1}, -+ {"io2", GSP_REG_IO2}, -+ {"pci2", GSP_REG_PCIE}, -+ {"current", GSP_REG_CURRENT}, -+ {"fan_point0", GSP_FAN_0}, -+ {"fan_point1", GSP_FAN_1}, -+ {"fan_point2", GSP_FAN_2}, -+ {"fan_point3", GSP_FAN_3}, -+ {"fan_point4", GSP_FAN_4}, -+ {"fan_point5", GSP_FAN_5}, -+}; -+ -+struct gsp_data { -+ struct device *hwmon_dev; -+ struct attribute_group attrs; -+ enum chips type; -+}; -+ -+static int gsp_probe(struct i2c_client *client, -+ const struct i2c_device_id *id); -+static int gsp_remove(struct i2c_client *client); -+ -+static const struct i2c_device_id gsp_id[] = { -+ { "gsp", 0 }, -+ { } -+}; -+MODULE_DEVICE_TABLE(i2c, gsp_id); -+ -+static struct i2c_driver gsp_driver = { -+ .driver = { -+ .name = "gsp", -+ }, -+ .probe = gsp_probe, -+ .remove = gsp_remove, -+ .id_table = gsp_id, -+}; -+ -+/* All registers are word-sized, except for the configuration registers. -+ * AD7418 uses a high-byte first convention. Do NOT use those functions to -+ * access the configuration registers CONF and CONF2, as they are byte-sized. -+ */ -+static inline int gsp_read(struct i2c_client *client, u8 reg) -+{ -+ unsigned int adc = 0; -+ if (reg == GSP_REG_TEMP_IN || reg > GSP_REG_CURRENT) -+ { -+ adc |= i2c_smbus_read_byte_data(client, reg); -+ adc |= i2c_smbus_read_byte_data(client, reg + 1) << 8; -+ return adc; -+ } -+ else -+ { -+ adc |= i2c_smbus_read_byte_data(client, reg); -+ adc |= i2c_smbus_read_byte_data(client, reg + 1) << 8; -+ adc |= i2c_smbus_read_byte_data(client, reg + 2) << 16; -+ return adc; -+ } -+} -+ -+static inline int gsp_write(struct i2c_client *client, u8 reg, u16 value) -+{ -+ i2c_smbus_write_byte_data(client, reg, value & 0xff); -+ i2c_smbus_write_byte_data(client, reg + 1, ((value >> 8) & 0xff)); -+ return 1; -+} -+ -+static ssize_t show_adc(struct device *dev, struct device_attribute *devattr, -+ char *buf) -+{ -+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); -+ struct i2c_client *client = to_i2c_client(dev); -+ return sprintf(buf, "%d\n", gsp_read(client, gsp_sensors[attr->index].reg)); -+} -+ -+static ssize_t show_label(struct device *dev, -+ struct device_attribute *devattr, char *buf) -+{ -+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); -+ -+ return sprintf(buf, "%s\n", gsp_sensors[attr->index].name); -+} -+ -+static ssize_t store_fan(struct device *dev, -+ struct device_attribute *devattr, const char *buf, size_t count) -+{ -+ u16 val; -+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); -+ struct i2c_client *client = to_i2c_client(dev); -+ val = simple_strtoul(buf, NULL, 10); -+ gsp_write(client, gsp_sensors[attr->index].reg, val); -+ return count; -+} -+ -+static SENSOR_DEVICE_ATTR(temp0_input, S_IRUGO, show_adc, NULL, 0); -+static SENSOR_DEVICE_ATTR(temp0_label, S_IRUGO, show_label, NULL, 0); -+ -+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_adc, NULL, 1); -+static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_label, NULL, 1); -+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_adc, NULL, 2); -+static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_label, NULL, 2); -+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_adc, NULL, 3); -+static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_label, NULL, 3); -+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_adc, NULL, 4); -+static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 4); -+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_adc, NULL, 5); -+static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_label, NULL, 5); -+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_adc, NULL, 6); -+static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_label, NULL, 6); -+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_adc, NULL, 7); -+static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_label, NULL, 7); -+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_adc, NULL, 8); -+static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 8); -+static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_adc, NULL, 9); -+static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 9); -+static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_adc, NULL, 10); -+static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 10); -+static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_adc, NULL, 11); -+static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_label, NULL, 11); -+static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_adc, NULL, 12); -+static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_label, NULL, 12); -+static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_adc, NULL, 13); -+static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_label, NULL, 13); -+ -+static SENSOR_DEVICE_ATTR(fan0_point0, S_IRUGO | S_IWUSR, show_adc, store_fan, 14); -+static SENSOR_DEVICE_ATTR(fan0_point1, S_IRUGO | S_IWUSR, show_adc, store_fan, 15); -+static SENSOR_DEVICE_ATTR(fan0_point2, S_IRUGO | S_IWUSR, show_adc, store_fan, 16); -+static SENSOR_DEVICE_ATTR(fan0_point3, S_IRUGO | S_IWUSR, show_adc, store_fan, 17); -+static SENSOR_DEVICE_ATTR(fan0_point4, S_IRUGO | S_IWUSR, show_adc, store_fan, 18); -+static SENSOR_DEVICE_ATTR(fan0_point5, S_IRUGO | S_IWUSR, show_adc, store_fan, 19); -+ -+static struct attribute *gsp_attributes[] = { -+ &sensor_dev_attr_temp0_input.dev_attr.attr, -+ &sensor_dev_attr_in0_input.dev_attr.attr, -+ &sensor_dev_attr_in1_input.dev_attr.attr, -+ &sensor_dev_attr_in2_input.dev_attr.attr, -+ &sensor_dev_attr_in3_input.dev_attr.attr, -+ &sensor_dev_attr_in4_input.dev_attr.attr, -+ &sensor_dev_attr_in5_input.dev_attr.attr, -+ &sensor_dev_attr_in6_input.dev_attr.attr, -+ &sensor_dev_attr_in7_input.dev_attr.attr, -+ &sensor_dev_attr_in8_input.dev_attr.attr, -+ &sensor_dev_attr_in9_input.dev_attr.attr, -+ &sensor_dev_attr_in10_input.dev_attr.attr, -+ &sensor_dev_attr_in11_input.dev_attr.attr, -+ &sensor_dev_attr_in12_input.dev_attr.attr, -+ -+ &sensor_dev_attr_temp0_label.dev_attr.attr, -+ &sensor_dev_attr_in0_label.dev_attr.attr, -+ &sensor_dev_attr_in1_label.dev_attr.attr, -+ &sensor_dev_attr_in2_label.dev_attr.attr, -+ &sensor_dev_attr_in3_label.dev_attr.attr, -+ &sensor_dev_attr_in4_label.dev_attr.attr, -+ &sensor_dev_attr_in5_label.dev_attr.attr, -+ &sensor_dev_attr_in6_label.dev_attr.attr, -+ &sensor_dev_attr_in7_label.dev_attr.attr, -+ &sensor_dev_attr_in8_label.dev_attr.attr, -+ &sensor_dev_attr_in9_label.dev_attr.attr, -+ &sensor_dev_attr_in10_label.dev_attr.attr, -+ &sensor_dev_attr_in11_label.dev_attr.attr, -+ &sensor_dev_attr_in12_label.dev_attr.attr, -+ -+ &sensor_dev_attr_fan0_point0.dev_attr.attr, -+ &sensor_dev_attr_fan0_point1.dev_attr.attr, -+ &sensor_dev_attr_fan0_point2.dev_attr.attr, -+ &sensor_dev_attr_fan0_point3.dev_attr.attr, -+ &sensor_dev_attr_fan0_point4.dev_attr.attr, -+ &sensor_dev_attr_fan0_point5.dev_attr.attr, -+ NULL -+}; -+ -+ -+static int gsp_probe(struct i2c_client *client, -+ const struct i2c_device_id *id) -+{ -+ struct i2c_adapter *adapter = client->adapter; -+ struct gsp_data *data; -+ int err; -+ -+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | -+ I2C_FUNC_SMBUS_WORD_DATA)) { -+ err = -EOPNOTSUPP; -+ goto exit; -+ } -+ -+ if (!(data = kzalloc(sizeof(struct gsp_data), GFP_KERNEL))) { -+ err = -ENOMEM; -+ goto exit; -+ } -+ -+ i2c_set_clientdata(client, data); -+ -+ data->type = id->driver_data; -+ -+ switch (data->type) { -+ case 0: -+ data->attrs.attrs = gsp_attributes; -+ break; -+ } -+ -+ dev_info(&client->dev, "%s chip found\n", client->name); -+ -+ /* Register sysfs hooks */ -+ if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs))) -+ goto exit_free; -+ -+ data->hwmon_dev = hwmon_device_register(&client->dev); -+ if (IS_ERR(data->hwmon_dev)) { -+ err = PTR_ERR(data->hwmon_dev); -+ goto exit_remove; -+ } -+ -+ return 0; -+ -+exit_remove: -+ sysfs_remove_group(&client->dev.kobj, &data->attrs); -+exit_free: -+ kfree(data); -+exit: -+ return err; -+} -+ -+static int gsp_remove(struct i2c_client *client) -+{ -+ struct gsp_data *data = i2c_get_clientdata(client); -+ hwmon_device_unregister(data->hwmon_dev); -+ sysfs_remove_group(&client->dev.kobj, &data->attrs); -+ kfree(data); -+ return 0; -+} -+ -+static int __init gsp_init(void) -+{ -+ return i2c_add_driver(&gsp_driver); -+} -+ -+static void __exit gsp_exit(void) -+{ -+ i2c_del_driver(&gsp_driver); -+} -+ -+module_init(gsp_init); -+module_exit(gsp_exit); -+ -+MODULE_AUTHOR("Chris Lang "); -+MODULE_DESCRIPTION("GSC HWMON driver"); -+MODULE_LICENSE("GPL"); -+MODULE_VERSION(DRV_VERSION); -+ diff --git a/target/linux/generic/patches-3.3/900-slab_maxsize.patch b/target/linux/generic/patches-3.3/900-slab_maxsize.patch deleted file mode 100644 index 1c9569450a..0000000000 --- a/target/linux/generic/patches-3.3/900-slab_maxsize.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/include/linux/slab.h -+++ b/include/linux/slab.h -@@ -127,8 +127,8 @@ unsigned int kmem_cache_size(struct kmem - * to do various tricks to work around compiler limitations in order to - * ensure proper constant folding. - */ --#define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \ -- (MAX_ORDER + PAGE_SHIFT - 1) : 25) -+#define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT - 1) <= 17 ? \ -+ (MAX_ORDER + PAGE_SHIFT - 1) : 17) - - #define KMALLOC_MAX_SIZE (1UL << KMALLOC_SHIFT_HIGH) - #define KMALLOC_MAX_ORDER (KMALLOC_SHIFT_HIGH - PAGE_SHIFT) diff --git a/target/linux/generic/patches-3.3/910-kobject_uevent.patch b/target/linux/generic/patches-3.3/910-kobject_uevent.patch deleted file mode 100644 index aa9a40f099..0000000000 --- a/target/linux/generic/patches-3.3/910-kobject_uevent.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/lib/kobject_uevent.c -+++ b/lib/kobject_uevent.c -@@ -50,6 +50,18 @@ static const char *kobject_actions[] = { - [KOBJ_OFFLINE] = "offline", - }; - -+u64 uevent_next_seqnum(void) -+{ -+ u64 seq; -+ -+ mutex_lock(&uevent_sock_mutex); -+ seq = ++uevent_seqnum; -+ mutex_unlock(&uevent_sock_mutex); -+ -+ return seq; -+} -+EXPORT_SYMBOL_GPL(uevent_next_seqnum); -+ - /** - * kobject_action_type - translate action string to numeric type - * diff --git a/target/linux/generic/patches-3.3/911-kobject_add_broadcast_uevent.patch b/target/linux/generic/patches-3.3/911-kobject_add_broadcast_uevent.patch deleted file mode 100644 index 104df13bf2..0000000000 --- a/target/linux/generic/patches-3.3/911-kobject_add_broadcast_uevent.patch +++ /dev/null @@ -1,85 +0,0 @@ ---- a/include/linux/kobject.h -+++ b/include/linux/kobject.h -@@ -31,6 +31,8 @@ - #define UEVENT_NUM_ENVP 32 /* number of env pointers */ - #define UEVENT_BUFFER_SIZE 2048 /* buffer for the variables */ - -+struct sk_buff; -+ - /* path to the userspace helper executed on an event */ - extern char uevent_helper[]; - -@@ -213,6 +215,10 @@ int add_uevent_var(struct kobj_uevent_en - - int kobject_action_type(const char *buf, size_t count, - enum kobject_action *type); -+ -+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group, -+ gfp_t allocation); -+ - #else - static inline int kobject_uevent(struct kobject *kobj, - enum kobject_action action) -@@ -229,6 +235,16 @@ int add_uevent_var(struct kobj_uevent_en - static inline int kobject_action_type(const char *buf, size_t count, - enum kobject_action *type) - { return -EINVAL; } -+ -+void kfree_skb(struct sk_buff *); -+ -+static inline int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group, -+ gfp_t allocation) -+{ -+ kfree_skb(skb); -+ return 0; -+} -+ - #endif - - #endif /* _KOBJECT_H_ */ ---- a/lib/kobject_uevent.c -+++ b/lib/kobject_uevent.c -@@ -381,6 +381,43 @@ int add_uevent_var(struct kobj_uevent_en - EXPORT_SYMBOL_GPL(add_uevent_var); - - #if defined(CONFIG_NET) -+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group, -+ gfp_t allocation) -+{ -+ struct uevent_sock *ue_sk; -+ int err = 0; -+ -+ /* send netlink message */ -+ mutex_lock(&uevent_sock_mutex); -+ list_for_each_entry(ue_sk, &uevent_sock_list, list) { -+ struct sock *uevent_sock = ue_sk->sk; -+ struct sk_buff *skb2; -+ -+ skb2 = skb_clone(skb, allocation); -+ if (!skb2) -+ break; -+ -+ err = netlink_broadcast(uevent_sock, skb2, pid, group, -+ allocation); -+ if (err) -+ break; -+ } -+ mutex_unlock(&uevent_sock_mutex); -+ -+ kfree_skb(skb); -+ return err; -+} -+#else -+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group, -+ gfp_t allocation) -+{ -+ kfree_skb(skb); -+ return 0; -+} -+#endif -+EXPORT_SYMBOL_GPL(broadcast_uevent); -+ -+#if defined(CONFIG_NET) - static int uevent_net_init(struct net *net) - { - struct uevent_sock *ue_sk; diff --git a/target/linux/generic/patches-3.3/921-use_preinit_as_init.patch b/target/linux/generic/patches-3.3/921-use_preinit_as_init.patch deleted file mode 100644 index a71251dcd7..0000000000 --- a/target/linux/generic/patches-3.3/921-use_preinit_as_init.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/init/main.c -+++ b/init/main.c -@@ -774,10 +774,7 @@ static noinline int init_post(void) - printk(KERN_WARNING "Failed to execute %s. Attempting " - "defaults...\n", execute_command); - } -- run_init_process("/sbin/init"); -- run_init_process("/etc/init"); -- run_init_process("/bin/init"); -- run_init_process("/bin/sh"); -+ run_init_process("/etc/preinit"); - - panic("No init found. Try passing init= option to kernel. " - "See Linux Documentation/init.txt for guidance."); diff --git a/target/linux/generic/patches-3.3/922-always-create-console-node-in-initramfs.patch b/target/linux/generic/patches-3.3/922-always-create-console-node-in-initramfs.patch deleted file mode 100644 index 988de35ce0..0000000000 --- a/target/linux/generic/patches-3.3/922-always-create-console-node-in-initramfs.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/scripts/gen_initramfs_list.sh -+++ b/scripts/gen_initramfs_list.sh -@@ -59,6 +59,18 @@ default_initramfs() { - EOF - } - -+list_openwrt_initramfs() { -+ : -+} -+ -+openwrt_initramfs() { -+ # make sure that /dev/console exists -+ cat <<-EOF >> ${output} -+ dir /dev 0755 0 0 -+ nod /dev/console 0600 0 0 c 5 1 -+ EOF -+} -+ - filetype() { - local argv1="$1" - -@@ -177,6 +189,8 @@ dir_filelist() { - if [ "$(echo "${dirlist}" | wc -l)" -gt 1 ]; then - ${dep_list}print_mtime "$1" - -+ ${dep_list}openwrt_initramfs -+ - echo "${dirlist}" | \ - while read x; do - ${dep_list}parse ${x} diff --git a/target/linux/generic/patches-3.3/930-crashlog.patch b/target/linux/generic/patches-3.3/930-crashlog.patch deleted file mode 100644 index 9a10723d76..0000000000 --- a/target/linux/generic/patches-3.3/930-crashlog.patch +++ /dev/null @@ -1,285 +0,0 @@ ---- /dev/null -+++ b/include/linux/crashlog.h -@@ -0,0 +1,17 @@ -+#ifndef __CRASHLOG_H -+#define __CRASHLOG_H -+ -+#ifdef CONFIG_CRASHLOG -+void crashlog_init_bootmem(struct bootmem_data *bdata); -+void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size); -+#else -+static inline void crashlog_init_bootmem(struct bootmem_data *bdata) -+{ -+} -+ -+static inline void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size) -+{ -+} -+#endif -+ -+#endif ---- a/init/Kconfig -+++ b/init/Kconfig -@@ -926,6 +926,10 @@ config RELAY - - If unsure, say N. - -+config CRASHLOG -+ bool "Crash logging" -+ depends on (!NO_BOOTMEM || HAVE_MEMBLOCK) && !(ARM || SPARC || PPC) -+ - config BLK_DEV_INITRD - bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support" - depends on BROKEN || !FRV ---- a/kernel/Makefile -+++ b/kernel/Makefile -@@ -107,6 +107,7 @@ obj-$(CONFIG_USER_RETURN_NOTIFIER) += us - obj-$(CONFIG_PADATA) += padata.o - obj-$(CONFIG_CRASH_DUMP) += crash_dump.o - obj-$(CONFIG_JUMP_LABEL) += jump_label.o -+obj-$(CONFIG_CRASHLOG) += crashlog.o - - $(obj)/configs.o: $(obj)/config_data.h - ---- /dev/null -+++ b/kernel/crashlog.c -@@ -0,0 +1,190 @@ -+/* -+ * Crash information logger -+ * Copyright (C) 2010 Felix Fietkau -+ * -+ * Based on ramoops.c -+ * Copyright (C) 2010 Marco Stornelli -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA -+ * 02110-1301 USA -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define CRASHLOG_PAGES 4 -+#define CRASHLOG_SIZE (CRASHLOG_PAGES * PAGE_SIZE) -+#define CRASHLOG_MAGIC 0xa1eedead -+ -+/* -+ * Start the log at 1M before the end of RAM, as some boot loaders like -+ * to use the end of the RAM for stack usage and other things -+ * If this fails, fall back to using the last part. -+ */ -+#define CRASHLOG_OFFSET (1024 * 1024) -+ -+struct crashlog_data { -+ u32 magic; -+ u32 len; -+ u8 data[]; -+}; -+ -+static struct debugfs_blob_wrapper crashlog_blob; -+static unsigned long crashlog_addr = 0; -+static struct crashlog_data *crashlog_buf; -+static struct kmsg_dumper dump; -+static bool first = true; -+ -+extern struct list_head *crashlog_modules; -+ -+#ifndef CONFIG_NO_BOOTMEM -+void __init crashlog_init_bootmem(bootmem_data_t *bdata) -+{ -+ unsigned long addr; -+ -+ if (crashlog_addr) -+ return; -+ -+ addr = PFN_PHYS(bdata->node_low_pfn) - CRASHLOG_OFFSET; -+ if (reserve_bootmem(addr, CRASHLOG_SIZE, BOOTMEM_EXCLUSIVE) < 0) { -+ printk("Crashlog failed to allocate RAM at address 0x%lx\n", addr); -+ bdata->node_low_pfn -= CRASHLOG_PAGES; -+ addr = PFN_PHYS(bdata->node_low_pfn); -+ } -+ crashlog_addr = addr; -+} -+#endif -+ -+#ifdef CONFIG_HAVE_MEMBLOCK -+void __meminit crashlog_init_memblock(phys_addr_t addr, phys_addr_t size) -+{ -+ if (crashlog_addr) -+ return; -+ -+ addr += size - CRASHLOG_OFFSET; -+ if (memblock_reserve(addr, CRASHLOG_SIZE)) { -+ printk("Crashlog failed to allocate RAM at address 0x%lx\n", (unsigned long) addr); -+ return; -+ } -+ -+ crashlog_addr = addr; -+} -+#endif -+ -+static void __init crashlog_copy(void) -+{ -+ if (crashlog_buf->magic != CRASHLOG_MAGIC) -+ return; -+ -+ if (!crashlog_buf->len || crashlog_buf->len > -+ CRASHLOG_SIZE - sizeof(*crashlog_buf)) -+ return; -+ -+ crashlog_blob.size = crashlog_buf->len; -+ crashlog_blob.data = kmemdup(crashlog_buf->data, -+ crashlog_buf->len, GFP_KERNEL); -+ -+ debugfs_create_blob("crashlog", 0700, NULL, &crashlog_blob); -+} -+ -+static int get_maxlen(void) -+{ -+ return CRASHLOG_SIZE - sizeof(*crashlog_buf) - crashlog_buf->len; -+} -+ -+static void crashlog_printf(const char *fmt, ...) -+{ -+ va_list args; -+ int len = get_maxlen(); -+ -+ if (!len) -+ return; -+ -+ va_start(args, fmt); -+ crashlog_buf->len += vscnprintf( -+ &crashlog_buf->data[crashlog_buf->len], -+ len, fmt, args); -+ va_end(args); -+} -+ -+static void crashlog_do_dump(struct kmsg_dumper *dumper, -+ enum kmsg_dump_reason reason, const char *s1, unsigned long l1, -+ const char *s2, unsigned long l2) -+{ -+ unsigned long s1_start, s2_start; -+ unsigned long l1_cpy, l2_cpy; -+ struct timeval tv; -+ struct module *m; -+ char *buf; -+ int len; -+ -+ if (!first) -+ crashlog_printf("\n===================================\n"); -+ -+ do_gettimeofday(&tv); -+ crashlog_printf("Time: %lu.%lu\n", -+ (long)tv.tv_sec, (long)tv.tv_usec); -+ -+ if (first) { -+ crashlog_printf("Modules:"); -+ list_for_each_entry(m, crashlog_modules, list) { -+ crashlog_printf("\t%s@%p+%x", m->name, -+ m->module_core, m->core_size, -+ m->module_init, m->init_size); -+ } -+ crashlog_printf("\n"); -+ first = false; -+ } -+ -+ buf = (char *)&crashlog_buf->data[crashlog_buf->len]; -+ len = get_maxlen(); -+ -+ l2_cpy = min(l2, (unsigned long)len); -+ l1_cpy = min(l1, (unsigned long)len - l2_cpy); -+ -+ s2_start = l2 - l2_cpy; -+ s1_start = l1 - l1_cpy; -+ -+ memcpy(buf, s1 + s1_start, l1_cpy); -+ memcpy(buf + l1_cpy, s2 + s2_start, l2_cpy); -+ crashlog_buf->len += l1_cpy + l2_cpy; -+} -+ -+ -+int __init crashlog_init_fs(void) -+{ -+ if (!crashlog_addr) -+ return -ENOMEM; -+ -+ crashlog_buf = ioremap(crashlog_addr, CRASHLOG_SIZE); -+ -+ crashlog_copy(); -+ -+ crashlog_buf->magic = CRASHLOG_MAGIC; -+ crashlog_buf->len = 0; -+ -+ dump.dump = crashlog_do_dump; -+ kmsg_dump_register(&dump); -+ -+ return 0; -+} -+module_init(crashlog_init_fs); ---- a/mm/bootmem.c -+++ b/mm/bootmem.c -@@ -15,6 +15,7 @@ - #include - #include - #include -+#include - #include - - #include -@@ -177,6 +178,7 @@ static unsigned long __init free_all_boo - if (!bdata->node_bootmem_map) - return 0; - -+ crashlog_init_bootmem(bdata); - start = bdata->node_min_pfn; - end = bdata->node_low_pfn; - ---- a/kernel/module.c -+++ b/kernel/module.c -@@ -101,6 +101,9 @@ static LIST_HEAD(modules); - #ifdef CONFIG_KGDB_KDB - struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */ - #endif /* CONFIG_KGDB_KDB */ -+#ifdef CONFIG_CRASHLOG -+struct list_head *crashlog_modules = &modules; -+#endif - - - /* Block module loading/unloading? */ ---- a/mm/memblock.c -+++ b/mm/memblock.c -@@ -19,6 +19,7 @@ - #include - #include - #include -+#include - - static struct memblock_region memblock_memory_init_regions[INIT_MEMBLOCK_REGIONS] __initdata_memblock; - static struct memblock_region memblock_reserved_init_regions[INIT_MEMBLOCK_REGIONS] __initdata_memblock; -@@ -305,6 +306,8 @@ static void __init_memblock memblock_ins - memblock_set_region_node(rgn, nid); - type->cnt++; - type->total_size += size; -+ if (type == &memblock.memory && idx == 0) -+ crashlog_init_memblock(base, size); - } - - /** diff --git a/target/linux/generic/patches-3.3/940-ocf_kbuild_integration.patch b/target/linux/generic/patches-3.3/940-ocf_kbuild_integration.patch deleted file mode 100644 index b5cce90a1b..0000000000 --- a/target/linux/generic/patches-3.3/940-ocf_kbuild_integration.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/crypto/Kconfig -+++ b/crypto/Kconfig -@@ -968,3 +968,6 @@ config CRYPTO_USER_API_SKCIPHER - source "drivers/crypto/Kconfig" - - endif # if CRYPTO -+ -+source "crypto/ocf/Kconfig" -+ ---- a/crypto/Makefile -+++ b/crypto/Makefile -@@ -92,6 +92,8 @@ obj-$(CONFIG_CRYPTO_USER_API) += af_alg. - obj-$(CONFIG_CRYPTO_USER_API_HASH) += algif_hash.o - obj-$(CONFIG_CRYPTO_USER_API_SKCIPHER) += algif_skcipher.o - -+obj-$(CONFIG_OCF_OCF) += ocf/ -+ - # - # generic algorithms and the async_tx api - # diff --git a/target/linux/generic/patches-3.3/941-ocf_20120127.patch b/target/linux/generic/patches-3.3/941-ocf_20120127.patch deleted file mode 100644 index 794627a854..0000000000 --- a/target/linux/generic/patches-3.3/941-ocf_20120127.patch +++ /dev/null @@ -1,164 +0,0 @@ ---- a/drivers/char/random.c -+++ b/drivers/char/random.c -@@ -131,6 +131,9 @@ - * void add_interrupt_randomness(int irq, int irq_flags); - * void add_disk_randomness(struct gendisk *disk); - * -+ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count) -+ * int random_input_wait(void); -+ * - * add_input_randomness() uses the input layer interrupt timing, as well as - * the event type information from the hardware. - * -@@ -152,6 +155,13 @@ - * seek times do not make for good sources of entropy, as their seek - * times are usually fairly consistent. - * -+ * random_input_words() just provides a raw block of entropy to the input -+ * pool, such as from a hardware entropy generator. -+ * -+ * random_input_wait() suspends the caller until such time as the -+ * entropy pool falls below the write threshold, and returns a count of how -+ * much entropy (in bits) is needed to sustain the pool. -+ * - * All of these routines try to estimate how many bits of randomness a - * particular randomness source. They do this by keeping track of the - * first and second order deltas of the event timings. -@@ -796,6 +806,63 @@ void add_disk_randomness(struct gendisk - } - #endif - -+/* -+ * random_input_words - add bulk entropy to pool -+ * -+ * @buf: buffer to add -+ * @wordcount: number of __u32 words to add -+ * @ent_count: total amount of entropy (in bits) to credit -+ * -+ * this provides bulk input of entropy to the input pool -+ * -+ */ -+void random_input_words(__u32 *buf, size_t wordcount, int ent_count) -+{ -+ mix_pool_bytes(&input_pool, buf, wordcount*4, NULL); -+ -+ credit_entropy_bits(&input_pool, ent_count); -+ -+ DEBUG_ENT("crediting %d bits => %d\n", -+ ent_count, input_pool.entropy_count); -+ /* -+ * Wake up waiting processes if we have enough -+ * entropy. -+ */ -+ if (input_pool.entropy_count >= random_read_wakeup_thresh) -+ wake_up_interruptible(&random_read_wait); -+} -+EXPORT_SYMBOL(random_input_words); -+ -+/* -+ * random_input_wait - wait until random needs entropy -+ * -+ * this function sleeps until the /dev/random subsystem actually -+ * needs more entropy, and then return the amount of entropy -+ * that it would be nice to have added to the system. -+ */ -+int random_input_wait(void) -+{ -+ int count; -+ -+ wait_event_interruptible(random_write_wait, -+ input_pool.entropy_count < random_write_wakeup_thresh); -+ -+ count = random_write_wakeup_thresh - input_pool.entropy_count; -+ -+ /* likely we got woken up due to a signal */ -+ if (count <= 0) count = random_read_wakeup_thresh; -+ -+ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n", -+ count, -+ input_pool.entropy_count, random_write_wakeup_thresh); -+ -+ return count; -+} -+EXPORT_SYMBOL(random_input_wait); -+ -+ -+#define EXTRACT_SIZE 10 -+ - /********************************************************************* - * - * Entropy extraction routines ---- a/fs/fcntl.c -+++ b/fs/fcntl.c -@@ -142,6 +142,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde - } - return ret; - } -+EXPORT_SYMBOL(sys_dup); - - #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME) - ---- a/include/linux/miscdevice.h -+++ b/include/linux/miscdevice.h -@@ -19,6 +19,7 @@ - #define APOLLO_MOUSE_MINOR 7 - #define PC110PAD_MINOR 9 - /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */ -+#define CRYPTODEV_MINOR 70 /* /dev/crypto */ - #define WATCHDOG_MINOR 130 /* Watchdog timer */ - #define TEMP_MINOR 131 /* Temperature Sensor */ - #define RTC_MINOR 135 ---- a/include/linux/random.h -+++ b/include/linux/random.h -@@ -34,6 +34,30 @@ - /* Clear the entropy pool and associated counters. (Superuser only.) */ - #define RNDCLEARPOOL _IO( 'R', 0x06 ) - -+#ifdef CONFIG_FIPS_RNG -+ -+/* Size of seed value - equal to AES blocksize */ -+#define AES_BLOCK_SIZE_BYTES 16 -+#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES -+/* Size of AES key */ -+#define KEY_SIZE_BYTES 16 -+ -+/* ioctl() structure used by FIPS 140-2 Tests */ -+struct rand_fips_test { -+ unsigned char key[KEY_SIZE_BYTES]; /* Input */ -+ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */ -+ unsigned char seed[SEED_SIZE_BYTES]; /* Input */ -+ unsigned char result[SEED_SIZE_BYTES]; /* Output */ -+}; -+ -+/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */ -+#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test) -+ -+/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */ -+#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test) -+ -+#endif /* #ifdef CONFIG_FIPS_RNG */ -+ - struct rand_pool_info { - int entropy_count; - int buf_size; -@@ -53,6 +77,10 @@ extern void add_input_randomness(unsigne - unsigned int value); - extern void add_interrupt_randomness(int irq, int irq_flags); - -+extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count); -+extern int random_input_wait(void); -+#define HAS_RANDOM_INPUT_WAIT 1 -+ - extern void get_random_bytes(void *buf, int nbytes); - extern void get_random_bytes_arch(void *buf, int nbytes); - void generate_random_uuid(unsigned char uuid_out[16]); ---- a/kernel/pid.c -+++ b/kernel/pid.c -@@ -430,6 +430,7 @@ struct task_struct *find_task_by_vpid(pi - { - return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns); - } -+EXPORT_SYMBOL(find_task_by_vpid); - - struct pid *get_task_pid(struct task_struct *task, enum pid_type type) - { diff --git a/target/linux/generic/patches-3.3/960-decompress_unlzo_fix.patch b/target/linux/generic/patches-3.3/960-decompress_unlzo_fix.patch deleted file mode 100644 index ee7c118ef0..0000000000 --- a/target/linux/generic/patches-3.3/960-decompress_unlzo_fix.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- /dev/null -+++ b/include/linux/decompress/unlzo_mm.h -@@ -0,0 +1,10 @@ -+#ifndef UNLZO_MM_H -+#define UNLZO_MM_H -+ -+#ifdef STATIC -+#define INIT -+#else -+#define INIT __init -+#endif -+ -+#endif ---- a/lib/decompress_unlzo.c -+++ b/lib/decompress_unlzo.c -@@ -38,6 +38,7 @@ - - #include - #include -+#include - #include - - #include diff --git a/target/linux/generic/patches-3.3/970-remove-unsane-filenames-from-deps_initramfs-list.patch b/target/linux/generic/patches-3.3/970-remove-unsane-filenames-from-deps_initramfs-list.patch deleted file mode 100644 index 65c6ef7d0c..0000000000 --- a/target/linux/generic/patches-3.3/970-remove-unsane-filenames-from-deps_initramfs-list.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/usr/Makefile -+++ b/usr/Makefile -@@ -50,20 +50,22 @@ ifneq ($(wildcard $(obj)/.initramfs_data - include $(obj)/.initramfs_data.cpio.d - endif - -+deps_initramfs_sane := $(foreach v,$(deps_initramfs),$(if $(findstring :,$(v)),,$(v))) -+ - quiet_cmd_initfs = GEN $@ - cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input) - - targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 initramfs_data.cpio.lzma initramfs_data.cpio.xz initramfs_data.cpio.lzo initramfs_data.cpio - # do not try to update files included in initramfs --$(deps_initramfs): ; -+$(deps_initramfs_sane): ; - --$(deps_initramfs): klibcdirs -+$(deps_initramfs_sane): klibcdirs - # We rebuild initramfs_data.cpio if: - # 1) Any included file is newer then initramfs_data.cpio - # 2) There are changes in which files are included (added or deleted) - # 3) If gen_init_cpio are newer than initramfs_data.cpio - # 4) arguments to gen_initramfs.sh changes --$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs -+$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs_sane) klibcdirs - $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.d - $(call if_changed,initfs) - diff --git a/target/linux/generic/patches-3.3/980-arm_openwrt_machtypes.patch b/target/linux/generic/patches-3.3/980-arm_openwrt_machtypes.patch deleted file mode 100644 index 8204318986..0000000000 --- a/target/linux/generic/patches-3.3/980-arm_openwrt_machtypes.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/arch/arm/tools/mach-types -+++ b/arch/arm/tools/mach-types -@@ -1169,3 +1169,31 @@ elite_ulk MACH_ELITE_ULK ELITE_ULK 38 - pov2 MACH_POV2 POV2 3889 - ipod_touch_2g MACH_IPOD_TOUCH_2G IPOD_TOUCH_2G 3890 - da850_pqab MACH_DA850_PQAB DA850_PQAB 3891 -+# -+# Additional mach-types supported by OpenWrt -+# -+wg302v1 MACH_WG302V1 WG302V1 889 -+pronghorn MACH_PRONGHORN PRONGHORN 928 -+pronghorn_metro MACH_PRONGHORNMETRO PRONGHORNMETRO 1040 -+sidewinder MACH_SIDEWINDER SIDEWINDER 1041 -+wrt300nv2 MACH_WRT300NV2 WRT300NV2 1077 -+compex42x MACH_COMPEXWP18 COMPEXWP18 1273 -+goldfish MACH_GOLDFISH GOLDFISH 1441 -+cambria MACH_CAMBRIA CAMBRIA 1468 -+dt2 MACH_DT2 DT2 1514 -+ap1000 MACH_AP1000 AP1000 1543 -+tw2662 MACH_TW2662 TW2662 1658 -+tw5334 MACH_TW5334 TW5334 1664 -+usr8200 MACH_USR8200 USR8200 1762 -+mi424wr MACH_MI424WR MI424WR 1778 -+gw2388 MACH_GW2388 GW2388 2635 -+iconnect MACH_ICONNECT ICONNECT 2870 -+nsb3ast MACH_NSB3AST NSB3AST 2917 -+goflexnet MACH_GOFLEXNET GOFLEXNET 3089 -+nas6210 MACH_NAS6210 NAS6210 3104 -+ns_k330 MACH_NS_K330 NS_K330 3108 -+bcm2708 MACH_BCM2708 BCM2708 3138 -+wn802t MACH_WN802T WN802T 3306 -+nsa310 MACH_NSA310 NSA310 4022 -+wnr3500 MACH_WNR3500 WNR3500 4407 -+ap42x MACH_AP42X AP42X 4418 diff --git a/target/linux/generic/patches-3.3/992-mpcore_wdt_fix_watchdog_counter_loading.patch b/target/linux/generic/patches-3.3/992-mpcore_wdt_fix_watchdog_counter_loading.patch deleted file mode 100644 index fb16e2aa62..0000000000 --- a/target/linux/generic/patches-3.3/992-mpcore_wdt_fix_watchdog_counter_loading.patch +++ /dev/null @@ -1,64 +0,0 @@ -Although the commit "98af057092f8f0dabe63c5df08adc2bbfbddb1d2 - ARM: 6126/1: ARM mpcore_wdt: fix build failure and other fixes" -resolved long standing mpcore_wdt driver build problems, it -introduced an error in the relationship between the MPcore watchdog -timer clock rate and mpcore_margin, "MPcore timer margin in seconds", -such that watchdog timeouts are now arbitrary rather than the number -of seconds specified by mpcore_margin. - -This change restores mpcore_wdt_keepalive() to its equivalent -implementation prior to commit 98af057 such that watchdog timeouts now -occur as specified by mpcore_margin. - -The variable 'mpcore_timer_rate' which caused that build failure was -replaced by 'twd_timer_rate'. Adding exported function to obtain -'twd_timer_rate' value in mpcore_wdt driver. - -MPCORE_WATCHDOG needed to build 'mpcore_wdt' already depends on -HAVE_ARM_TWD needed to build 'smp_twd', so from the point of view of -'mpcore_wdt' driver the exported function will always exist. - -Signed-off-by: Valentine Barshak -Signed-off-by: Vitaly Kuzmichev ---- - - arch/arm/include/asm/smp_twd.h | 1 + - arch/arm/kernel/smp_twd.c | 7 +++++++ - drivers/watchdog/mpcore_wdt.c | 4 +--- - 3 files changed, 9 insertions(+), 3 deletions(-) - ---- a/arch/arm/include/asm/smp_twd.h -+++ b/arch/arm/include/asm/smp_twd.h -@@ -24,5 +24,6 @@ extern void __iomem *twd_base; - - void twd_timer_setup(struct clock_event_device *); - void twd_timer_stop(struct clock_event_device *); -+unsigned long twd_timer_get_rate(void); - - #endif ---- a/arch/arm/kernel/smp_twd.c -+++ b/arch/arm/kernel/smp_twd.c -@@ -268,3 +268,10 @@ void __cpuinit twd_timer_setup(struct cl - 0xf, 0xffffffff); - enable_percpu_irq(clk->irq, 0); - } -+ -+/* Needed by mpcore_wdt */ -+unsigned long twd_timer_get_rate(void) -+{ -+ return twd_timer_rate; -+} -+EXPORT_SYMBOL_GPL(twd_timer_get_rate); ---- a/drivers/watchdog/mpcore_wdt.c -+++ b/drivers/watchdog/mpcore_wdt.c -@@ -99,9 +99,7 @@ static void mpcore_wdt_keepalive(struct - - spin_lock(&wdt_lock); - /* Assume prescale is set to 256 */ -- count = __raw_readl(wdt->base + TWD_WDOG_COUNTER); -- count = (0xFFFFFFFFU - count) * (HZ / 5); -- count = (count / 256) * mpcore_margin; -+ count = (twd_timer_get_rate() / 256) * mpcore_margin; - - /* Reload the counter */ - writel(count + wdt->perturb, wdt->base + TWD_WDOG_LOAD); diff --git a/target/linux/generic/patches-3.3/993-mpcore_wdt_fix_wdioc_setoptions_handling.patch b/target/linux/generic/patches-3.3/993-mpcore_wdt_fix_wdioc_setoptions_handling.patch deleted file mode 100644 index fa261ce648..0000000000 --- a/target/linux/generic/patches-3.3/993-mpcore_wdt_fix_wdioc_setoptions_handling.patch +++ /dev/null @@ -1,29 +0,0 @@ -According to the include/linux/watchdog.h WDIOC_SETOPTIONS is -classified as 'read from device' ioctl call: - #define WDIOC_SETOPTIONS _IOR(WATCHDOG_IOCTL_BASE, 4, int) - -However, the driver 'mpcore_wdt' performs 'copy_from_user' only if -_IOC_WRITE is set, thus the local variable 'uarg' which is used in -WDIOC_SETOPTIONS handling remains uninitialized. - -The proper way to fix this is to bind WDIOC_SETOPTIONS to _IOW, -but this will break compatibility. -So adding additional condition for performing 'copy_from_user'. - -Signed-off-by: Vitaly Kuzmichev ---- - drivers/watchdog/mpcore_wdt.c | 3 ++- - 1 files changed, 2 insertions(+), 1 deletions(-) - ---- a/drivers/watchdog/mpcore_wdt.c -+++ b/drivers/watchdog/mpcore_wdt.c -@@ -233,7 +233,8 @@ static long mpcore_wdt_ioctl(struct file - if (_IOC_DIR(cmd) && _IOC_SIZE(cmd) > sizeof(uarg)) - return -ENOTTY; - -- if (_IOC_DIR(cmd) & _IOC_WRITE) { -+ if ((_IOC_DIR(cmd) & _IOC_WRITE) -+ || cmd == WDIOC_SETOPTIONS) { - ret = copy_from_user(&uarg, (void __user *)arg, _IOC_SIZE(cmd)); - if (ret) - return -EFAULT; diff --git a/target/linux/generic/patches-3.3/994-mpcore_wdt_fix_timer_mode_setup.patch b/target/linux/generic/patches-3.3/994-mpcore_wdt_fix_timer_mode_setup.patch deleted file mode 100644 index 009092376f..0000000000 --- a/target/linux/generic/patches-3.3/994-mpcore_wdt_fix_timer_mode_setup.patch +++ /dev/null @@ -1,57 +0,0 @@ -Allow watchdog to set its iterrupt as pending when it is configured -for timer mode (in other words, allow emitting interrupt). -Also add macros for all Watchdog Control Register flags. - -Signed-off-by: Vitaly Kuzmichev ---- - arch/arm/include/asm/smp_twd.h | 6 ++++++ - drivers/watchdog/mpcore_wdt.c | 15 +++++++++++---- - 2 files changed, 17 insertions(+), 4 deletions(-) - ---- a/arch/arm/include/asm/smp_twd.h -+++ b/arch/arm/include/asm/smp_twd.h -@@ -18,6 +18,12 @@ - #define TWD_TIMER_CONTROL_PERIODIC (1 << 1) - #define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) - -+#define TWD_WDOG_CONTROL_ENABLE (1 << 0) -+#define TWD_WDOG_CONTROL_PERIODIC (1 << 1) -+#define TWD_WDOG_CONTROL_IT_ENABLE (1 << 2) -+#define TWD_WDOG_CONTROL_TIMER_MODE (0 << 3) -+#define TWD_WDOG_CONTROL_WATCHDOG_MODE (1 << 3) -+ - struct clock_event_device; - - extern void __iomem *twd_base; ---- a/drivers/watchdog/mpcore_wdt.c -+++ b/drivers/watchdog/mpcore_wdt.c -@@ -118,18 +118,25 @@ static void mpcore_wdt_stop(struct mpcor - - static void mpcore_wdt_start(struct mpcore_wdt *wdt) - { -+ u32 mode; -+ - dev_printk(KERN_INFO, wdt->dev, "enabling watchdog.\n"); - - /* This loads the count register but does NOT start the count yet */ - mpcore_wdt_keepalive(wdt); - -+ /* Setup watchdog - prescale=256, enable=1 */ -+ mode = (255 << 8) | TWD_WDOG_CONTROL_ENABLE; -+ - if (mpcore_noboot) { -- /* Enable watchdog - prescale=256, watchdog mode=0, enable=1 */ -- writel(0x0000FF01, wdt->base + TWD_WDOG_CONTROL); -+ /* timer mode, send interrupt */ -+ mode |= TWD_WDOG_CONTROL_TIMER_MODE | -+ TWD_WDOG_CONTROL_IT_ENABLE; - } else { -- /* Enable watchdog - prescale=256, watchdog mode=1, enable=1 */ -- writel(0x0000FF09, wdt->base + TWD_WDOG_CONTROL); -+ /* watchdog mode */ -+ mode |= TWD_WDOG_CONTROL_WATCHDOG_MODE; - } -+ writel(mode, wdt->base + TWD_WDOG_CONTROL); - } - - static int mpcore_wdt_set_heartbeat(int t) diff --git a/target/linux/generic/patches-3.3/a01-swconfig_leds-define-leds_set_brightness.patch b/target/linux/generic/patches-3.3/a01-swconfig_leds-define-leds_set_brightness.patch deleted file mode 100644 index e9362e420b..0000000000 --- a/target/linux/generic/patches-3.3/a01-swconfig_leds-define-leds_set_brightness.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/net/phy/swconfig_leds.c -+++ b/drivers/net/phy/swconfig_leds.c -@@ -20,6 +20,8 @@ - #define SWCONFIG_LED_TIMER_INTERVAL (HZ / 10) - #define SWCONFIG_LED_NUM_PORTS 32 - -+#define led_set_brightness(_led, _switch) led_brightness_set((_led), (_switch)) -+ - struct switch_led_trigger { - struct led_trigger trig; - struct switch_dev *swdev; diff --git a/target/linux/generic/patches-3.3/a02-swconfig-revert-portid-snd_portid-usage.patch b/target/linux/generic/patches-3.3/a02-swconfig-revert-portid-snd_portid-usage.patch deleted file mode 100644 index 03f4685ce5..0000000000 --- a/target/linux/generic/patches-3.3/a02-swconfig-revert-portid-snd_portid-usage.patch +++ /dev/null @@ -1,30 +0,0 @@ -reverted: ---- a/drivers/net/phy/swconfig.c -+++ b/drivers/net/phy/swconfig.c -@@ -378,7 +378,7 @@ swconfig_dump_attr(struct swconfig_callb - int id = cb->args[0]; - void *hdr; - -- hdr = genlmsg_put(msg, info->snd_portid, info->snd_seq, &switch_fam, -+ hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq, &switch_fam, - NLM_F_MULTI, SWITCH_CMD_NEW_ATTR); - if (IS_ERR(hdr)) - return -1; -@@ -801,7 +801,7 @@ swconfig_get_attr(struct sk_buff *skb, s - if (!msg) - goto error; - -- hdr = genlmsg_put(msg, info->snd_portid, info->snd_seq, &switch_fam, -+ hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq, &switch_fam, - 0, cmd); - if (IS_ERR(hdr)) - goto nla_put_failure; -@@ -906,7 +906,7 @@ static int swconfig_dump_switches(struct - list_for_each_entry(dev, &swdevs, dev_list) { - if (++idx <= start) - continue; -- if (swconfig_send_switch(skb, NETLINK_CB(cb->skb).portid, -+ if (swconfig_send_switch(skb, NETLINK_CB(cb->skb).pid, - cb->nlh->nlmsg_seq, NLM_F_MULTI, - dev) < 0) - break; diff --git a/target/linux/generic/patches-3.3/a03-swconfig-revert-UAPI-disintegration.patch b/target/linux/generic/patches-3.3/a03-swconfig-revert-UAPI-disintegration.patch deleted file mode 100644 index a214c15002..0000000000 --- a/target/linux/generic/patches-3.3/a03-swconfig-revert-UAPI-disintegration.patch +++ /dev/null @@ -1,109 +0,0 @@ ---- a/include/linux/switch.h -+++ b/include/linux/switch.h -@@ -13,11 +13,95 @@ - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ --#ifndef _LINUX_SWITCH_H --#define _LINUX_SWITCH_H - -+#ifndef __LINUX_SWITCH_H -+#define __LINUX_SWITCH_H -+ -+#include -+#include -+#include -+#include -+#ifndef __KERNEL__ -+#include -+#include -+#include -+#else - #include --#include -+#endif -+ -+/* main attributes */ -+enum { -+ SWITCH_ATTR_UNSPEC, -+ /* global */ -+ SWITCH_ATTR_TYPE, -+ /* device */ -+ SWITCH_ATTR_ID, -+ SWITCH_ATTR_DEV_NAME, -+ SWITCH_ATTR_ALIAS, -+ SWITCH_ATTR_NAME, -+ SWITCH_ATTR_VLANS, -+ SWITCH_ATTR_PORTS, -+ SWITCH_ATTR_PORTMAP, -+ SWITCH_ATTR_CPU_PORT, -+ /* attributes */ -+ SWITCH_ATTR_OP_ID, -+ SWITCH_ATTR_OP_TYPE, -+ SWITCH_ATTR_OP_NAME, -+ SWITCH_ATTR_OP_PORT, -+ SWITCH_ATTR_OP_VLAN, -+ SWITCH_ATTR_OP_VALUE_INT, -+ SWITCH_ATTR_OP_VALUE_STR, -+ SWITCH_ATTR_OP_VALUE_PORTS, -+ SWITCH_ATTR_OP_DESCRIPTION, -+ /* port lists */ -+ SWITCH_ATTR_PORT, -+ SWITCH_ATTR_MAX -+}; -+ -+enum { -+ /* port map */ -+ SWITCH_PORTMAP_PORTS, -+ SWITCH_PORTMAP_SEGMENT, -+ SWITCH_PORTMAP_VIRT, -+ SWITCH_PORTMAP_MAX -+}; -+ -+/* commands */ -+enum { -+ SWITCH_CMD_UNSPEC, -+ SWITCH_CMD_GET_SWITCH, -+ SWITCH_CMD_NEW_ATTR, -+ SWITCH_CMD_LIST_GLOBAL, -+ SWITCH_CMD_GET_GLOBAL, -+ SWITCH_CMD_SET_GLOBAL, -+ SWITCH_CMD_LIST_PORT, -+ SWITCH_CMD_GET_PORT, -+ SWITCH_CMD_SET_PORT, -+ SWITCH_CMD_LIST_VLAN, -+ SWITCH_CMD_GET_VLAN, -+ SWITCH_CMD_SET_VLAN -+}; -+ -+/* data types */ -+enum switch_val_type { -+ SWITCH_TYPE_UNSPEC, -+ SWITCH_TYPE_INT, -+ SWITCH_TYPE_STRING, -+ SWITCH_TYPE_PORTS, -+ SWITCH_TYPE_NOVAL, -+}; -+ -+/* port nested attributes */ -+enum { -+ SWITCH_PORT_UNSPEC, -+ SWITCH_PORT_ID, -+ SWITCH_PORT_FLAG_TAGGED, -+ SWITCH_PORT_ATTR_MAX -+}; -+ -+#define SWITCH_ATTR_DEFAULTS_OFFSET 0x1000 -+ -+#ifdef __KERNEL__ - - struct switch_dev; - struct switch_op; -@@ -164,4 +248,6 @@ struct switch_attr { - int max; - }; - --#endif /* _LINUX_SWITCH_H */ -+#endif -+ -+#endif