From: Paul Spooren Date: Wed, 3 Nov 2021 00:41:23 +0000 (-1000) Subject: pistachio: drop Kernel 5.4 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=184d072fc0d4fd2721e66abf00c985f4477c6a09;p=openwrt%2Fstaging%2Fnbd.git pistachio: drop Kernel 5.4 support With the switch to Kernel 5.10 the 5.4 files are no longer needed. Signed-off-by: Paul Spooren --- diff --git a/target/linux/pistachio/config-5.4 b/target/linux/pistachio/config-5.4 deleted file mode 100644 index a6625d8254..0000000000 --- a/target/linux/pistachio/config-5.4 +++ /dev/null @@ -1,372 +0,0 @@ -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y -CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y -CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y -CONFIG_ARCH_HAS_UNCACHED_SEGMENT=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_MEMREMAP_PROT=y -CONFIG_ARCH_USE_QUEUED_RWLOCKS=y -CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y -CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BOARD_SCACHE=y -CONFIG_BOOT_ELF32=y -CONFIG_CEVT_R4K=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MIPS_GIC=y -CONFIG_CLKSRC_PISTACHIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -# CONFIG_COMMON_CLK_BOSTON is not set -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONNECTOR=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_LOAD_STORE_LR=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_RIXI=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_MIPSR2_IRQ_EI=y -CONFIG_CPU_MIPSR2_IRQ_VI=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_PM=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CPU_SUPPORTS_MSA=y -CONFIG_CRC16=y -CONFIG_CRC_CCITT=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_LIB_SHA256=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_CSRC_R4K=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y -CONFIG_DMA_OF=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DTC=y -CONFIG_DWMAC_GENERIC=y -CONFIG_EARLY_PRINTK=y -CONFIG_EARLY_PRINTK_8250=y -CONFIG_EFI_EARLYCON=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -CONFIG_FIXED_PHY=y -CONFIG_FONT_8x16=y -CONFIG_FONT_AUTOSELECT=y -CONFIG_FONT_SUPPORT=y -CONFIG_FS_IOMAP=y -CONFIG_FS_MBCACHE=y -CONFIG_FS_POSIX_ACL=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_IPI=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_LIB_ASHLDI3=y -CONFIG_GENERIC_LIB_ASHRDI3=y -CONFIG_GENERIC_LIB_CMPDI2=y -CONFIG_GENERIC_LIB_LSHRDI3=y -CONFIG_GENERIC_LIB_UCMPDI2=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_ARCH_COMPILER_H=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ASM_MODVERSIONS=y -CONFIG_HAVE_CBPF_JIT=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FAST_GUP=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_VDSO=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KVM=y -CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HOTPLUG_CPU=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_IMG=y -CONFIG_IMGPDC_WDT=y -CONFIG_IMG_MDC_DMA=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_PWM=y -CONFIG_LIBFDT=y -CONFIG_LKDTM=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOG_BUF_SHIFT=18 -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MACH_PISTACHIO=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0 -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MICREL_PHY=y -CONFIG_MIGRATION=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CBPF_JIT=y -CONFIG_MIPS_CLOCK_VSYSCALL=y -CONFIG_MIPS_CM=y -# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set -CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y -# CONFIG_MIPS_CMDLINE_FROM_DTB is not set -CONFIG_MIPS_CPC=y -CONFIG_MIPS_CPS=y -# CONFIG_MIPS_CPS_CPUIDLE is not set -# CONFIG_MIPS_CPS_NS16550_BOOL is not set -CONFIG_MIPS_CPS_PM=y -CONFIG_MIPS_CPU_SCACHE=y -# CONFIG_MIPS_ELF_APPENDED_DTB is not set -CONFIG_MIPS_EXTERNAL_TIMER=y -CONFIG_MIPS_GIC=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_MT=y -CONFIG_MIPS_MT_FPAFF=y -CONFIG_MIPS_MT_SMP=y -CONFIG_MIPS_NO_APPENDED_DTB=y -CONFIG_MIPS_NR_CPU_NR_MAP=4 -CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y -# CONFIG_MIPS_RAW_APPENDED_DTB is not set -CONFIG_MIPS_SPRAM=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_DW=y -# CONFIG_MMC_DW_BLUEFIELD is not set -# CONFIG_MMC_DW_EXYNOS is not set -# CONFIG_MMC_DW_HI3798CV200 is not set -# CONFIG_MMC_DW_K3 is not set -CONFIG_MMC_DW_PLTFM=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_SPI_NAND=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384 -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_FASTMAP=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_NAMESPACES=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_NS=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NLS=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=4 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_PADATA=y -CONFIG_PAGE_POOL=y -CONFIG_PCI_DRIVERS_LEGACY=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -# CONFIG_PGTABLE_MAPPING is not set -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -CONFIG_PHY_PISTACHIO_USB=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_PISTACHIO=y -CONFIG_PISTACHIO_GPTIMER_CLKSRC=y -CONFIG_POWER_SUPPLY=y -CONFIG_PPS=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -CONFIG_PRINTK_TIME=y -CONFIG_PROC_EVENTS=y -CONFIG_PROFILING=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_PWM=y -CONFIG_PWM_IMG=y -CONFIG_PWM_SYSFS=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_RATIONAL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_GPIO=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RESET_PISTACHIO=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_SCHEDSTATS=y -CONFIG_SCHED_INFO=y -CONFIG_SCSI=y -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SERIAL_8250_DW=y -CONFIG_SERIAL_8250_DWLIB=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIAL_SC16IS7XX=y -CONFIG_SERIAL_SC16IS7XX_CORE=y -# CONFIG_SERIAL_SC16IS7XX_I2C is not set -CONFIG_SERIAL_SC16IS7XX_SPI=y -CONFIG_SGL_ALLOC=y -CONFIG_SG_POOL=y -CONFIG_SMP=y -CONFIG_SMP_UP=y -CONFIG_SPI=y -CONFIG_SPI_IMG_SPFI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SRAM=y -CONFIG_SRCU=y -CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y -# CONFIG_STMMAC_SELFTESTS is not set -CONFIG_SWPHY=y -CONFIG_SYNC_R4K=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_MIPS_CPS=y -CONFIG_SYS_SUPPORTS_MULTITHREADING=y -CONFIG_SYS_SUPPORTS_RELOCATABLE=y -CONFIG_SYS_SUPPORTS_SCHED_SMT=y -CONFIG_SYS_SUPPORTS_SMP=y -CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_TARGET_ISA_REV=2 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_COMMON=y -CONFIG_USB_DWC2=y -CONFIG_USB_DWC2_DUAL_ROLE=y -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_HCD_PLATFORM is not set -CONFIG_USB_GADGET=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SUPPORT=y -CONFIG_USER_NS=y -CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y -CONFIG_USE_OF=y -CONFIG_WATCHDOG_CORE=y -CONFIG_WEAK_ORDERING=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZSMALLOC=y -# CONFIG_ZSMALLOC_STAT is not set -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/pistachio/patches-5.4/101-dmaengine-img-mdc-Handle-early-status-read.patch b/target/linux/pistachio/patches-5.4/101-dmaengine-img-mdc-Handle-early-status-read.patch deleted file mode 100644 index 031a4e3e5e..0000000000 --- a/target/linux/pistachio/patches-5.4/101-dmaengine-img-mdc-Handle-early-status-read.patch +++ /dev/null @@ -1,68 +0,0 @@ -From a2dd154377c9aa6ddda00d39b8c7c334e4fa16ff Mon Sep 17 00:00:00 2001 -From: Damien Horsley -Date: Tue, 22 Mar 2016 12:46:09 +0000 -Subject: dmaengine: img-mdc: Handle early status read - -It is possible that mdc_tx_status may be called before the first -node has been read from memory. - -In this case, the residue value stored in the register is undefined. -Return the transfer size instead. - -Signed-off-by: Damien Horsley ---- - drivers/dma/img-mdc-dma.c | 40 ++++++++++++++++++++++++---------------- - 1 file changed, 24 insertions(+), 16 deletions(-) - ---- a/drivers/dma/img-mdc-dma.c -+++ b/drivers/dma/img-mdc-dma.c -@@ -618,25 +618,33 @@ static enum dma_status mdc_tx_status(str - (MDC_CMDS_PROCESSED_CMDS_DONE_MASK + 1); - - /* -- * If the command loaded event hasn't been processed yet, then -- * the difference above includes an extra command. -+ * If the first node has not yet been read from memory, -+ * the residue register value is undefined - */ -- if (!mdesc->cmd_loaded) -- cmds--; -- else -- cmds += mdesc->list_cmds_done; -- -- bytes = mdesc->list_xfer_size; -- ldesc = mdesc->list; -- for (i = 0; i < cmds; i++) { -- bytes -= ldesc->xfer_size + 1; -- ldesc = ldesc->next_desc; -- } -- if (ldesc) { -- if (residue != MDC_TRANSFER_SIZE_MASK) -- bytes -= ldesc->xfer_size - residue; -+ if (!mdesc->cmd_loaded && !cmds) { -+ bytes = mdesc->list_xfer_size; -+ } else { -+ /* -+ * If the command loaded event hasn't been processed yet, then -+ * the difference above includes an extra command. -+ */ -+ if (!mdesc->cmd_loaded) -+ cmds--; - else -+ cmds += mdesc->list_cmds_done; -+ -+ bytes = mdesc->list_xfer_size; -+ ldesc = mdesc->list; -+ for (i = 0; i < cmds; i++) { - bytes -= ldesc->xfer_size + 1; -+ ldesc = ldesc->next_desc; -+ } -+ if (ldesc) { -+ if (residue != MDC_TRANSFER_SIZE_MASK) -+ bytes -= ldesc->xfer_size - residue; -+ else -+ bytes -= ldesc->xfer_size + 1; -+ } - } - } - spin_unlock_irqrestore(&mchan->vc.lock, flags); diff --git a/target/linux/pistachio/patches-5.4/102-spi-img-spfi-Implement-dual-and-quad-mode.patch b/target/linux/pistachio/patches-5.4/102-spi-img-spfi-Implement-dual-and-quad-mode.patch deleted file mode 100644 index 9966ae71a9..0000000000 --- a/target/linux/pistachio/patches-5.4/102-spi-img-spfi-Implement-dual-and-quad-mode.patch +++ /dev/null @@ -1,198 +0,0 @@ -From cd2a6af51553d38072cd31699b58d16ca6176ef5 Mon Sep 17 00:00:00 2001 -From: Ionela Voinescu -Date: Thu, 2 Feb 2017 16:46:14 +0000 -Subject: spi: img-spfi: Implement dual and quad mode - -For dual and quad modes to work the SPFI controller needs -to have information about command/address/dummy bytes in the -transaction register. This information is not relevant for -single mode, and therefore it can have any value in the -allowed range. Therefore, for any read or write transfers of less -than 8 bytes (cmd = 1 byte, addr up to 7 bytes), SPFI will be -configured, but not enabled (unless it is the last transfer in -the queue). The transfer will be enabled by the subsequent tranfer. -A pending transfer is determined by the content of the transaction -register: if command part is set and tsize is not. - -This way we ensure that for dual and quad transactions -the command request size will apear in the command/address part -of the transaction register, while the data size will be in -tsize, all data being sent/received in the same transaction (as -set up in the transaction register). - -Signed-off-by: Ionela Voinescu -Signed-off-by: Ezequiel Garcia ---- - drivers/spi/spi-img-spfi.c | 96 ++++++++++++++++++++++++++++++++++++++++------ - 1 file changed, 85 insertions(+), 11 deletions(-) - ---- a/drivers/spi/spi-img-spfi.c -+++ b/drivers/spi/spi-img-spfi.c -@@ -37,7 +37,8 @@ - #define SPFI_CONTROL_SOFT_RESET BIT(11) - #define SPFI_CONTROL_SEND_DMA BIT(10) - #define SPFI_CONTROL_GET_DMA BIT(9) --#define SPFI_CONTROL_SE BIT(8) -+#define SPFI_CONTROL_SE BIT(8) -+#define SPFI_CONTROL_TX_RX BIT(1) - #define SPFI_CONTROL_TMODE_SHIFT 5 - #define SPFI_CONTROL_TMODE_MASK 0x7 - #define SPFI_CONTROL_TMODE_SINGLE 0 -@@ -48,6 +49,10 @@ - #define SPFI_TRANSACTION 0x18 - #define SPFI_TRANSACTION_TSIZE_SHIFT 16 - #define SPFI_TRANSACTION_TSIZE_MASK 0xffff -+#define SPFI_TRANSACTION_CMD_SHIFT 13 -+#define SPFI_TRANSACTION_CMD_MASK 0x7 -+#define SPFI_TRANSACTION_ADDR_SHIFT 10 -+#define SPFI_TRANSACTION_ADDR_MASK 0x7 - - #define SPFI_PORT_STATE 0x1c - #define SPFI_PORT_STATE_DEV_SEL_SHIFT 20 -@@ -84,6 +89,7 @@ - */ - #define SPFI_32BIT_FIFO_SIZE 64 - #define SPFI_8BIT_FIFO_SIZE 16 -+#define SPFI_DATA_REQUEST_MAX_SIZE 8 - - struct img_spfi { - struct device *dev; -@@ -100,6 +106,8 @@ struct img_spfi { - struct dma_chan *tx_ch; - bool tx_dma_busy; - bool rx_dma_busy; -+ -+ bool complete; - }; - - struct img_spfi_device_data { -@@ -120,9 +128,11 @@ static inline void spfi_start(struct img - { - u32 val; - -- val = spfi_readl(spfi, SPFI_CONTROL); -- val |= SPFI_CONTROL_SPFI_EN; -- spfi_writel(spfi, val, SPFI_CONTROL); -+ if (spfi->complete) { -+ val = spfi_readl(spfi, SPFI_CONTROL); -+ val |= SPFI_CONTROL_SPFI_EN; -+ spfi_writel(spfi, val, SPFI_CONTROL); -+ } - } - - static inline void spfi_reset(struct img_spfi *spfi) -@@ -135,12 +145,21 @@ static int spfi_wait_all_done(struct img - { - unsigned long timeout = jiffies + msecs_to_jiffies(50); - -+ if (!(spfi->complete)) -+ return 0; -+ - while (time_before(jiffies, timeout)) { - u32 status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS); - - if (status & SPFI_INTERRUPT_ALLDONETRIG) { - spfi_writel(spfi, SPFI_INTERRUPT_ALLDONETRIG, - SPFI_INTERRUPT_CLEAR); -+ /* -+ * Disable SPFI for it not to interfere with -+ * pending transactions -+ */ -+ spfi_writel(spfi, spfi_readl(spfi, SPFI_CONTROL) -+ & ~SPFI_CONTROL_SPFI_EN, SPFI_CONTROL); - return 0; - } - cpu_relax(); -@@ -494,9 +513,32 @@ static void img_spfi_config(struct spi_m - struct spi_transfer *xfer) - { - struct img_spfi *spfi = spi_master_get_devdata(spi->master); -- u32 val, div; -+ u32 val, div, transact; -+ bool is_pending; - - /* -+ * For read or write transfers of less than 8 bytes (cmd = 1 byte, -+ * addr up to 7 bytes), SPFI will be configured, but not enabled -+ * (unless it is the last transfer in the queue).The transfer will -+ * be enabled by the subsequent transfer. -+ * A pending transfer is determined by the content of the -+ * transaction register: if command part is set and tsize -+ * is not -+ */ -+ transact = spfi_readl(spfi, SPFI_TRANSACTION); -+ is_pending = ((transact >> SPFI_TRANSACTION_CMD_SHIFT) & -+ SPFI_TRANSACTION_CMD_MASK) && -+ (!((transact >> SPFI_TRANSACTION_TSIZE_SHIFT) & -+ SPFI_TRANSACTION_TSIZE_MASK)); -+ -+ /* If there are no pending transactions it's OK to soft reset */ -+ if (!is_pending) { -+ /* Start the transaction from a known (reset) state */ -+ spfi_reset(spfi); -+ } -+ -+ /* -+ * Before anything else, set up parameters. - * output = spfi_clk * (BITCLK / 512), where BITCLK must be a - * power of 2 up to 128 - */ -@@ -509,20 +551,52 @@ static void img_spfi_config(struct spi_m - val |= div << SPFI_DEVICE_PARAMETER_BITCLK_SHIFT; - spfi_writel(spfi, val, SPFI_DEVICE_PARAMETER(spi->chip_select)); - -- spfi_writel(spfi, xfer->len << SPFI_TRANSACTION_TSIZE_SHIFT, -- SPFI_TRANSACTION); -+ if (!list_is_last(&xfer->transfer_list, &master->cur_msg->transfers) && -+ /* -+ * For duplex mode (both the tx and rx buffers are !NULL) the -+ * CMD, ADDR, and DUMMY byte parts of the transaction register -+ * should always be 0 and therefore the pending transfer -+ * technique cannot be used. -+ */ -+ (xfer->tx_buf) && (!xfer->rx_buf) && -+ (xfer->len <= SPFI_DATA_REQUEST_MAX_SIZE) && !is_pending) { -+ transact = (1 & SPFI_TRANSACTION_CMD_MASK) << -+ SPFI_TRANSACTION_CMD_SHIFT; -+ transact |= ((xfer->len - 1) & SPFI_TRANSACTION_ADDR_MASK) << -+ SPFI_TRANSACTION_ADDR_SHIFT; -+ spfi->complete = false; -+ } else { -+ spfi->complete = true; -+ if (is_pending) { -+ /* Keep setup from pending transfer */ -+ transact |= ((xfer->len & SPFI_TRANSACTION_TSIZE_MASK) << -+ SPFI_TRANSACTION_TSIZE_SHIFT); -+ } else { -+ transact = ((xfer->len & SPFI_TRANSACTION_TSIZE_MASK) << -+ SPFI_TRANSACTION_TSIZE_SHIFT); -+ } -+ } -+ spfi_writel(spfi, transact, SPFI_TRANSACTION); - - val = spfi_readl(spfi, SPFI_CONTROL); - val &= ~(SPFI_CONTROL_SEND_DMA | SPFI_CONTROL_GET_DMA); -- if (xfer->tx_buf) -+ /* -+ * We set up send DMA for pending transfers also, as -+ * those are always send transfers -+ */ -+ if ((xfer->tx_buf) || is_pending) - val |= SPFI_CONTROL_SEND_DMA; -- if (xfer->rx_buf) -+ if (xfer->tx_buf) -+ val |= SPFI_CONTROL_TX_RX; -+ if (xfer->rx_buf) { - val |= SPFI_CONTROL_GET_DMA; -+ val &= ~SPFI_CONTROL_TX_RX; -+ } - val &= ~(SPFI_CONTROL_TMODE_MASK << SPFI_CONTROL_TMODE_SHIFT); -- if (xfer->tx_nbits == SPI_NBITS_DUAL && -+ if (xfer->tx_nbits == SPI_NBITS_DUAL || - xfer->rx_nbits == SPI_NBITS_DUAL) - val |= SPFI_CONTROL_TMODE_DUAL << SPFI_CONTROL_TMODE_SHIFT; -- else if (xfer->tx_nbits == SPI_NBITS_QUAD && -+ else if (xfer->tx_nbits == SPI_NBITS_QUAD || - xfer->rx_nbits == SPI_NBITS_QUAD) - val |= SPFI_CONTROL_TMODE_QUAD << SPFI_CONTROL_TMODE_SHIFT; - val |= SPFI_CONTROL_SE; diff --git a/target/linux/pistachio/patches-5.4/104-spi-img-spfi-use-device-0-configuration-for-all-devi.patch b/target/linux/pistachio/patches-5.4/104-spi-img-spfi-use-device-0-configuration-for-all-devi.patch deleted file mode 100644 index 9050dae187..0000000000 --- a/target/linux/pistachio/patches-5.4/104-spi-img-spfi-use-device-0-configuration-for-all-devi.patch +++ /dev/null @@ -1,64 +0,0 @@ -From 905ee06a9966113fe51d6bad1819759cb30fd0bd Mon Sep 17 00:00:00 2001 -From: Ionela Voinescu -Date: Tue, 9 Feb 2016 10:18:31 +0000 -Subject: spi: img-spfi: use device 0 configuration for all devices - -Given that we control the chip select line externally -we can use only one parameter register (device 0 parameter -register) and one set of configuration bits (port configuration -bits for device 0) for all devices (all chip select lines). - -Signed-off-by: Ionela Voinescu ---- - drivers/spi/spi-img-spfi.c | 23 ++++++++++++++++------- - 1 file changed, 16 insertions(+), 7 deletions(-) - ---- a/drivers/spi/spi-img-spfi.c -+++ b/drivers/spi/spi-img-spfi.c -@@ -434,18 +434,23 @@ static int img_spfi_prepare(struct spi_m - struct img_spfi *spfi = spi_master_get_devdata(master); - u32 val; - -+ /* -+ * The chip select line is controlled externally so -+ * we can use the CS0 configuration for all devices -+ */ - val = spfi_readl(spfi, SPFI_PORT_STATE); -+ -+ /* 0 for device selection */ - val &= ~(SPFI_PORT_STATE_DEV_SEL_MASK << - SPFI_PORT_STATE_DEV_SEL_SHIFT); -- val |= msg->spi->chip_select << SPFI_PORT_STATE_DEV_SEL_SHIFT; - if (msg->spi->mode & SPI_CPHA) -- val |= SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select); -+ val |= SPFI_PORT_STATE_CK_PHASE(0); - else -- val &= ~SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select); -+ val &= ~SPFI_PORT_STATE_CK_PHASE(0); - if (msg->spi->mode & SPI_CPOL) -- val |= SPFI_PORT_STATE_CK_POL(msg->spi->chip_select); -+ val |= SPFI_PORT_STATE_CK_POL(0); - else -- val &= ~SPFI_PORT_STATE_CK_POL(msg->spi->chip_select); -+ val &= ~SPFI_PORT_STATE_CK_POL(0); - spfi_writel(spfi, val, SPFI_PORT_STATE); - - return 0; -@@ -545,11 +550,15 @@ static void img_spfi_config(struct spi_m - div = DIV_ROUND_UP(clk_get_rate(spfi->spfi_clk), xfer->speed_hz); - div = clamp(512 / (1 << get_count_order(div)), 1, 128); - -- val = spfi_readl(spfi, SPFI_DEVICE_PARAMETER(spi->chip_select)); -+ /* -+ * The chip select line is controlled externally so -+ * we can use the CS0 parameters for all devices -+ */ -+ val = spfi_readl(spfi, SPFI_DEVICE_PARAMETER(0)); - val &= ~(SPFI_DEVICE_PARAMETER_BITCLK_MASK << - SPFI_DEVICE_PARAMETER_BITCLK_SHIFT); - val |= div << SPFI_DEVICE_PARAMETER_BITCLK_SHIFT; -- spfi_writel(spfi, val, SPFI_DEVICE_PARAMETER(spi->chip_select)); -+ spfi_writel(spfi, val, SPFI_DEVICE_PARAMETER(0)); - - if (!list_is_last(&xfer->transfer_list, &master->cur_msg->transfers) && - /* diff --git a/target/linux/pistachio/patches-5.4/105-spi-img-spfi-RX-maximum-burst-size-for-DMA-is-8.patch b/target/linux/pistachio/patches-5.4/105-spi-img-spfi-RX-maximum-burst-size-for-DMA-is-8.patch deleted file mode 100644 index 182897cd5a..0000000000 --- a/target/linux/pistachio/patches-5.4/105-spi-img-spfi-RX-maximum-burst-size-for-DMA-is-8.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 56466f505f58f44b69feb7eaed3b506842800456 Mon Sep 17 00:00:00 2001 -From: Ionela Voinescu -Date: Tue, 1 Mar 2016 17:49:45 +0000 -Subject: spi: img-spfi: RX maximum burst size for DMA is 8 - -The depth of the FIFOs is 16 bytes. The DMA request line is tied -to the half full/empty (depending on the use of the TX or RX FIFO) -threshold. For the TX FIFO, if you set a burst size of 8 (equal to -half the depth) the first burst goes into FIFO without any issues, -but due the latency involved (the time the data leaves the DMA -engine to the time it arrives at the FIFO), the DMA might trigger -another burst of 8. But given that there is no space for 2 additonal -bursts of 8, this would result in a failure. Therefore, we have to -keep the burst size for TX to 4 to accomodate for an extra burst. - -For the read (RX) scenario, the DMA request line goes high when -there is at least 8 entries in the FIFO (half full), and we can -program the burst size to be 8 because the risk of accidental burst -does not exist. The DMA engine will not trigger another read until -the read data for all the burst it has sent out has been received. - -While here, move the burst size setting outside of the if/else branches -as they have the same value for both 8 and 32 bit data widths. - -Signed-off-by: Ionela Voinescu ---- - drivers/spi/spi-img-spfi.c | 6 ++---- - 1 file changed, 2 insertions(+), 4 deletions(-) - ---- a/drivers/spi/spi-img-spfi.c -+++ b/drivers/spi/spi-img-spfi.c -@@ -343,12 +343,11 @@ static int img_spfi_start_dma(struct spi - if (xfer->len % 4 == 0) { - rxconf.src_addr = spfi->phys + SPFI_RX_32BIT_VALID_DATA; - rxconf.src_addr_width = 4; -- rxconf.src_maxburst = 4; - } else { - rxconf.src_addr = spfi->phys + SPFI_RX_8BIT_VALID_DATA; - rxconf.src_addr_width = 1; -- rxconf.src_maxburst = 4; - } -+ rxconf.src_maxburst = 8; - dmaengine_slave_config(spfi->rx_ch, &rxconf); - - rxdesc = dmaengine_prep_slave_sg(spfi->rx_ch, xfer->rx_sg.sgl, -@@ -367,12 +366,11 @@ static int img_spfi_start_dma(struct spi - if (xfer->len % 4 == 0) { - txconf.dst_addr = spfi->phys + SPFI_TX_32BIT_VALID_DATA; - txconf.dst_addr_width = 4; -- txconf.dst_maxburst = 4; - } else { - txconf.dst_addr = spfi->phys + SPFI_TX_8BIT_VALID_DATA; - txconf.dst_addr_width = 1; -- txconf.dst_maxburst = 4; - } -+ txconf.dst_maxburst = 4; - dmaengine_slave_config(spfi->tx_ch, &txconf); - - txdesc = dmaengine_prep_slave_sg(spfi->tx_ch, xfer->tx_sg.sgl, diff --git a/target/linux/pistachio/patches-5.4/106-spi-img-spfi-finish-every-transfer-cleanly.patch b/target/linux/pistachio/patches-5.4/106-spi-img-spfi-finish-every-transfer-cleanly.patch deleted file mode 100644 index cffb72ee33..0000000000 --- a/target/linux/pistachio/patches-5.4/106-spi-img-spfi-finish-every-transfer-cleanly.patch +++ /dev/null @@ -1,120 +0,0 @@ -From 5fcca3fd4b621d7b5bdeca18d36dfc6ca6cfe383 Mon Sep 17 00:00:00 2001 -From: Ionela Voinescu -Date: Wed, 10 Aug 2016 11:42:26 +0100 -Subject: spi: img-spfi: finish every transfer cleanly - -Before this change, the interrupt status bit that signaled -the end of a tranfers was cleared in the wait_all_done -function. That functionality triggered issues for DMA -duplex transactions where the wait function was called -twice, in both the TX and RX callbacks. - -In order to fix the issue, clear all interrupt data bits -at the end of a PIO transfer or at the end of both TX and RX -duplex transfers, if the transfer is not a pending tranfer -(command waiting for data). After that, the status register -is checked for new incoming data or new data requests to be -signaled. If SPFI finished cleanly, no new interrupt data -bits should be set. - -Signed-off-by: Ionela Voinescu ---- - drivers/spi/spi-img-spfi.c | 49 +++++++++++++++++++++++++++++++++------------- - 1 file changed, 35 insertions(+), 14 deletions(-) - ---- a/drivers/spi/spi-img-spfi.c -+++ b/drivers/spi/spi-img-spfi.c -@@ -80,6 +80,14 @@ - #define SPFI_INTERRUPT_SDE BIT(1) - #define SPFI_INTERRUPT_SDTRIG BIT(0) - -+#define SPFI_INTERRUPT_DATA_BITS (SPFI_INTERRUPT_SDHF |\ -+ SPFI_INTERRUPT_SDFUL |\ -+ SPFI_INTERRUPT_GDEX32BIT |\ -+ SPFI_INTERRUPT_GDHF |\ -+ SPFI_INTERRUPT_GDFUL |\ -+ SPFI_INTERRUPT_ALLDONETRIG |\ -+ SPFI_INTERRUPT_GDEX8BIT) -+ - /* - * There are four parallel FIFOs of 16 bytes each. The word buffer - * (*_32BIT_VALID_DATA) accesses all four FIFOs at once, resulting in an -@@ -141,6 +149,23 @@ static inline void spfi_reset(struct img - spfi_writel(spfi, 0, SPFI_CONTROL); - } - -+static inline void spfi_finish(struct img_spfi *spfi) -+{ -+ if (!(spfi->complete)) -+ return; -+ -+ /* Clear data bits as all transfers(TX and RX) have finished */ -+ spfi_writel(spfi, SPFI_INTERRUPT_DATA_BITS, SPFI_INTERRUPT_CLEAR); -+ if (spfi_readl(spfi, SPFI_INTERRUPT_STATUS) & SPFI_INTERRUPT_DATA_BITS) { -+ dev_err(spfi->dev, "SPFI did not finish transfer cleanly.\n"); -+ spfi_reset(spfi); -+ } -+ /* Disable SPFI for it not to interfere with pending transactions */ -+ spfi_writel(spfi, -+ spfi_readl(spfi, SPFI_CONTROL) & ~SPFI_CONTROL_SPFI_EN, -+ SPFI_CONTROL); -+} -+ - static int spfi_wait_all_done(struct img_spfi *spfi) - { - unsigned long timeout = jiffies + msecs_to_jiffies(50); -@@ -149,19 +174,9 @@ static int spfi_wait_all_done(struct img - return 0; - - while (time_before(jiffies, timeout)) { -- u32 status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS); -- -- if (status & SPFI_INTERRUPT_ALLDONETRIG) { -- spfi_writel(spfi, SPFI_INTERRUPT_ALLDONETRIG, -- SPFI_INTERRUPT_CLEAR); -- /* -- * Disable SPFI for it not to interfere with -- * pending transactions -- */ -- spfi_writel(spfi, spfi_readl(spfi, SPFI_CONTROL) -- & ~SPFI_CONTROL_SPFI_EN, SPFI_CONTROL); -+ if (spfi_readl(spfi, SPFI_INTERRUPT_STATUS) & -+ SPFI_INTERRUPT_ALLDONETRIG) - return 0; -- } - cpu_relax(); - } - -@@ -293,6 +308,8 @@ static int img_spfi_start_pio(struct spi - } - - ret = spfi_wait_all_done(spfi); -+ spfi_finish(spfi); -+ - if (ret < 0) - return ret; - -@@ -308,8 +325,10 @@ static void img_spfi_dma_rx_cb(void *dat - - spin_lock_irqsave(&spfi->lock, flags); - spfi->rx_dma_busy = false; -- if (!spfi->tx_dma_busy) -+ if (!spfi->tx_dma_busy) { -+ spfi_finish(spfi); - spi_finalize_current_transfer(spfi->master); -+ } - spin_unlock_irqrestore(&spfi->lock, flags); - } - -@@ -322,8 +341,10 @@ static void img_spfi_dma_tx_cb(void *dat - - spin_lock_irqsave(&spfi->lock, flags); - spfi->tx_dma_busy = false; -- if (!spfi->rx_dma_busy) -+ if (!spfi->rx_dma_busy) { -+ spfi_finish(spfi); - spi_finalize_current_transfer(spfi->master); -+ } - spin_unlock_irqrestore(&spfi->lock, flags); - } - diff --git a/target/linux/pistachio/patches-5.4/108-clk-pistachio-Fix-wrong-SDHost-card-speed.patch b/target/linux/pistachio/patches-5.4/108-clk-pistachio-Fix-wrong-SDHost-card-speed.patch deleted file mode 100644 index 6fddbe269a..0000000000 --- a/target/linux/pistachio/patches-5.4/108-clk-pistachio-Fix-wrong-SDHost-card-speed.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 3642843a06025ec333d7e92580cf52cb8db2a652 Mon Sep 17 00:00:00 2001 -From: Govindraj Raja -Date: Fri, 8 Jan 2016 16:36:07 +0000 -Subject: clk: pistachio: Fix wrong SDHost card speed - -The SDHost currently clocks the card 4x slower than it -should do, because there is fixed divide by 4 in the -sdhost wrapper that is not present in the clock tree. -To model this add a fixed divide by 4 clock node in -the SDHost clock path. - -This will ensure the right clock frequency is selected when -the mmc driver tries to configure frequency on card insert. - -Signed-off-by: Govindraj Raja ---- - drivers/clk/pistachio/clk-pistachio.c | 3 ++- - include/dt-bindings/clock/pistachio-clk.h | 1 + - 2 files changed, 3 insertions(+), 1 deletion(-) - ---- a/drivers/clk/pistachio/clk-pistachio.c -+++ b/drivers/clk/pistachio/clk-pistachio.c -@@ -41,7 +41,7 @@ static struct pistachio_gate pistachio_g - GATE(CLK_AUX_ADC_INTERNAL, "aux_adc_internal", "sys_internal_div", - 0x104, 22), - GATE(CLK_AUX_ADC, "aux_adc", "aux_adc_div", 0x104, 23), -- GATE(CLK_SD_HOST, "sd_host", "sd_host_div", 0x104, 24), -+ GATE(CLK_SD_HOST, "sd_host", "sd_host_div4", 0x104, 24), - GATE(CLK_BT, "bt", "bt_div", 0x104, 25), - GATE(CLK_BT_DIV4, "bt_div4", "bt_div4_div", 0x104, 26), - GATE(CLK_BT_DIV8, "bt_div8", "bt_div8_div", 0x104, 27), -@@ -51,6 +51,7 @@ static struct pistachio_gate pistachio_g - static struct pistachio_fixed_factor pistachio_ffs[] __initdata = { - FIXED_FACTOR(CLK_WIFI_DIV4, "wifi_div4", "wifi_pll", 4), - FIXED_FACTOR(CLK_WIFI_DIV8, "wifi_div8", "wifi_pll", 8), -+ FIXED_FACTOR(CLK_SDHOST_DIV4, "sd_host_div4", "sd_host_div", 4), - }; - - static struct pistachio_div pistachio_divs[] __initdata = { ---- a/include/dt-bindings/clock/pistachio-clk.h -+++ b/include/dt-bindings/clock/pistachio-clk.h -@@ -18,6 +18,7 @@ - /* Fixed-factor clocks */ - #define CLK_WIFI_DIV4 16 - #define CLK_WIFI_DIV8 17 -+#define CLK_SDHOST_DIV4 18 - - /* Gate clocks */ - #define CLK_MIPS 32 diff --git a/target/linux/pistachio/patches-5.4/109-MIPS-DTS-img-marduk-switch-mmc-to-1-bit-mode.patch b/target/linux/pistachio/patches-5.4/109-MIPS-DTS-img-marduk-switch-mmc-to-1-bit-mode.patch deleted file mode 100644 index cec424a0ce..0000000000 --- a/target/linux/pistachio/patches-5.4/109-MIPS-DTS-img-marduk-switch-mmc-to-1-bit-mode.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 981c1d416af45eff207227aec106381ac23aac99 Mon Sep 17 00:00:00 2001 -From: Ian Pozella -Date: Mon, 20 Feb 2017 10:00:52 +0000 -Subject: MIPS: DTS: img: marduk: switch mmc to 1 bit mode - -The mmc block in Pistachio allows 1 to 8 data bits to be used. -Marduk uses 4 bits allowing the upper 4 bits to be allocated -to the Mikrobus ports. However these bits are still connected -internally meaning the mmc block recieves signals on all data lines -and seems the internal HW CRC checks get corrupted by this erroneous -data. - -We cannot control what data is sent on these lines because they go -to external ports. 1 bit mode does not exhibit the issue hence the -safe default is to use this. If a user knows that in their use case -they will not use the upper bits then they can set to 4 bit mode in -order to improve performance. - -Also make sure that the upper 4 bits don't get allocated to the mmc -driver (the default is to assign all 8 pins) so they can be allocated -to other drivers. Allocating all 4 despite setting 1 bit mode as this -matches what is there in hardware. - -Signed-off-by: Ian Pozella ---- - arch/mips/boot/dts/img/pistachio_marduk.dts | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/arch/mips/boot/dts/img/pistachio_marduk.dts -+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts -@@ -117,7 +117,7 @@ - - &sdhost { - status = "okay"; -- bus-width = <4>; -+ bus-width = <1>; - disable-wp; - }; - -@@ -127,6 +127,7 @@ - - &pin_sdhost_data { - drive-strength = <2>; -+ pins = "mfio17", "mfio18", "mfio19", "mfio20"; - }; - - &pwm { diff --git a/target/linux/pistachio/patches-5.4/401-mtd-nor-support-mtd-name-from-device-tree.patch b/target/linux/pistachio/patches-5.4/401-mtd-nor-support-mtd-name-from-device-tree.patch deleted file mode 100644 index cdf0e49b21..0000000000 --- a/target/linux/pistachio/patches-5.4/401-mtd-nor-support-mtd-name-from-device-tree.patch +++ /dev/null @@ -1,54 +0,0 @@ -From f32bc2aa01edcba2f2ed5db151cf183eac9ef919 Mon Sep 17 00:00:00 2001 -From: Abhimanyu Vishwakarma -Date: Sat, 25 Feb 2017 16:42:50 +0000 -Subject: mtd: nor: support mtd name from device tree - -Signed-off-by: Abhimanyu Vishwakarma ---- - drivers/mtd/spi-nor/spi-nor.c | 8 +++++++- - 1 file changed, 7 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -4939,6 +4939,7 @@ int spi_nor_scan(struct spi_nor *nor, co - struct mtd_info *mtd = &nor->mtd; - struct device_node *np = spi_nor_get_flash_node(nor); - struct spi_nor_flash_parameter *params = &nor->params; -+ const char __maybe_unused *of_mtd_name = NULL; - int ret; - int i; - -@@ -5001,7 +5002,12 @@ int spi_nor_scan(struct spi_nor *nor, co - /* Init flash parameters based on flash_info struct and SFDP */ - spi_nor_init_params(nor); - -- if (!mtd->name) -+#ifdef CONFIG_MTD_OF_PARTS -+ of_property_read_string(np, "linux,mtd-name", &of_mtd_name); -+#endif -+ if (of_mtd_name) -+ mtd->name = of_mtd_name; -+ else if (!mtd->name) - mtd->name = dev_name(dev); - mtd->priv = nor; - mtd->type = MTD_NORFLASH; ---- a/drivers/mtd/mtdcore.c -+++ b/drivers/mtd/mtdcore.c -@@ -779,6 +779,17 @@ out_error: - */ - static void mtd_set_dev_defaults(struct mtd_info *mtd) - { -+#ifdef CONFIG_MTD_OF_PARTS -+ const char __maybe_unused *of_mtd_name = NULL; -+ struct device_node *np; -+ -+ np = mtd_get_of_node(mtd); -+ if (np && !mtd->name) { -+ of_property_read_string(np, "linux,mtd-name", &of_mtd_name); -+ if (of_mtd_name) -+ mtd->name = of_mtd_name; -+ } else -+#endif - if (mtd->dev.parent) { - if (!mtd->owner && mtd->dev.parent->driver) - mtd->owner = mtd->dev.parent->driver->owner; diff --git a/target/linux/pistachio/patches-5.4/901-MIPS-DTS-img-marduk-Add-SPI-NAND-flash.patch b/target/linux/pistachio/patches-5.4/901-MIPS-DTS-img-marduk-Add-SPI-NAND-flash.patch deleted file mode 100644 index cd97e38e00..0000000000 --- a/target/linux/pistachio/patches-5.4/901-MIPS-DTS-img-marduk-Add-SPI-NAND-flash.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 0023c706f7e0f0f02bd48a63a2f3c04c839532ae Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 15 Aug 2020 16:04:53 +0200 -Subject: [PATCH 901/904] MIPS: DTS: img: marduk: Add SPI NAND flash - -Add Gigadevice GD5F4GQ4UCYIGT SPI NAND flash to the device tree. - -The NAND flash chip is connected with quad SPI, but reading currently -fails in quad SPI mode. - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/boot/dts/img/pistachio_marduk.dts | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/arch/mips/boot/dts/img/pistachio_marduk.dts -+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts -@@ -88,6 +88,12 @@ - reg = <0>; - spi-max-frequency = <50000000>; - }; -+ -+ flash@1 { -+ compatible = "spi-nand"; -+ reg = <1>; -+ spi-max-frequency = <50000000>; -+ }; - }; - - &uart0 { diff --git a/target/linux/pistachio/patches-5.4/902-MIPS-DTS-img-marduk-Add-Cascoda-CA8210-6LoWPAN.patch b/target/linux/pistachio/patches-5.4/902-MIPS-DTS-img-marduk-Add-Cascoda-CA8210-6LoWPAN.patch deleted file mode 100644 index af1882e287..0000000000 --- a/target/linux/pistachio/patches-5.4/902-MIPS-DTS-img-marduk-Add-Cascoda-CA8210-6LoWPAN.patch +++ /dev/null @@ -1,43 +0,0 @@ -From b7700154d75e8d7c9a2022f09c2d5430137606fa Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 15 Aug 2020 16:05:25 +0200 -Subject: [PATCH 902/904] MIPS: DTS: img: marduk: Add Cascoda CA8210 6LoWPAN - -Add Cascoda CA8210 6LoWPAN controller to device tree. - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/boot/dts/img/pistachio_marduk.dts | 22 +++++++++++++++++++++ - 1 file changed, 22 insertions(+) - ---- a/arch/mips/boot/dts/img/pistachio_marduk.dts -+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts -@@ -75,6 +75,28 @@ - VDD-supply = <&internal_dac_supply>; - }; - -+&spfi0 { -+ status = "okay"; -+ pinctrl-0 = <&spim0_pins>, <&spim0_cs0_alt_pin>, <&spim0_cs2_alt_pin>, <&spim0_cs3_alt_pin>, <&spim0_cs4_alt_pin>; -+ pinctrl-names = "default"; -+ -+ cs-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>, <&gpio0 2 GPIO_ACTIVE_HIGH>, -+ <&gpio1 12 GPIO_ACTIVE_HIGH>, <&gpio1 13 GPIO_ACTIVE_HIGH>; -+ -+ ca8210: ca8210@0 { -+ status = "okay"; -+ compatible = "cascoda,ca8210"; -+ reg = <0>; -+ spi-max-frequency = <4000000>; -+ spi-cpol; -+ reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; -+ irq-gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; -+ extclock-enable; -+ extclock-freq = <16000000>; -+ extclock-gpio = <2>; -+ }; -+}; -+ - &spfi1 { - status = "okay"; - diff --git a/target/linux/pistachio/patches-5.4/903-MIPS-DTS-img-marduk-Add-NXP-SC16IS752IPW.patch b/target/linux/pistachio/patches-5.4/903-MIPS-DTS-img-marduk-Add-NXP-SC16IS752IPW.patch deleted file mode 100644 index 0814658998..0000000000 --- a/target/linux/pistachio/patches-5.4/903-MIPS-DTS-img-marduk-Add-NXP-SC16IS752IPW.patch +++ /dev/null @@ -1,81 +0,0 @@ -From ad4eba0c36ce8af6ab9ea1bc163e4c1ac7c271c3 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 15 Aug 2020 16:09:02 +0200 -Subject: [PATCH 903/904] MIPS: DTS: img: marduk: Add NXP SC16IS752IPW - -Add NXP SC16IS752IPW SPI-UART controller to device tree. - -This controller drives 2 UARTs and 7 LEDs on the board. - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/boot/dts/img/pistachio_marduk.dts | 51 +++++++++++++++++++++ - 1 file changed, 51 insertions(+) - ---- a/arch/mips/boot/dts/img/pistachio_marduk.dts -+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts -@@ -46,6 +46,46 @@ - regulator-max-microvolt = <1800000>; - }; - -+ /* EXT clock from ca8210 is fed to sc16is752 */ -+ ca8210_ext_clk: ca8210-ext-clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <16000000>; -+ clock-output-names = "ca8210_ext_clock"; -+ }; -+ -+ gpioleds { -+ compatible = "gpio-leds"; -+ user1 { -+ label = "marduk:red:user1"; -+ gpios = <&sc16is752 0 GPIO_ACTIVE_LOW>; -+ }; -+ user2 { -+ label = "marduk:red:user2"; -+ gpios = <&sc16is752 1 GPIO_ACTIVE_LOW>; -+ }; -+ user3 { -+ label = "marduk:red:user3"; -+ gpios = <&sc16is752 2 GPIO_ACTIVE_LOW>; -+ }; -+ user4 { -+ label = "marduk:red:user4"; -+ gpios = <&sc16is752 3 GPIO_ACTIVE_LOW>; -+ }; -+ user5 { -+ label = "marduk:red:user5"; -+ gpios = <&sc16is752 4 GPIO_ACTIVE_LOW>; -+ }; -+ user6 { -+ label = "marduk:red:user6"; -+ gpios = <&sc16is752 5 GPIO_ACTIVE_LOW>; -+ }; -+ user7 { -+ label = "marduk:red:user7"; -+ gpios = <&sc16is752 6 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ - leds { - compatible = "pwm-leds"; - heartbeat { -@@ -95,6 +135,17 @@ - extclock-freq = <16000000>; - extclock-gpio = <2>; - }; -+ -+ sc16is752: sc16is752@1 { -+ compatible = "nxp,sc16is752"; -+ reg = <1>; -+ clocks = <&ca8210_ext_clk>; -+ spi-max-frequency = <4000000>; -+ interrupt-parent = <&gpio0>; -+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; - }; - - &spfi1 { diff --git a/target/linux/pistachio/patches-5.4/904-MIPS-DTS-img-marduk-Add-partition-name.patch b/target/linux/pistachio/patches-5.4/904-MIPS-DTS-img-marduk-Add-partition-name.patch deleted file mode 100644 index ce41c67461..0000000000 --- a/target/linux/pistachio/patches-5.4/904-MIPS-DTS-img-marduk-Add-partition-name.patch +++ /dev/null @@ -1,27 +0,0 @@ -From ff0e950b605047bf50d470023e0fb2fc2003a0f0 Mon Sep 17 00:00:00 2001 -From: Ian Pozella -Date: Mon, 20 Feb 2017 10:38:07 +0000 -Subject: [PATCH 904/904] MIPS: DTS: img: marduk: Add partition name - -Signed-off-by: Ian Pozella ---- - arch/mips/boot/dts/img/pistachio_marduk.dts | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/mips/boot/dts/img/pistachio_marduk.dts -+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts -@@ -160,12 +160,14 @@ - compatible = "spansion,s25fl016k", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; -+ linux,mtd-name = "spi-nor"; - }; - - flash@1 { - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <50000000>; -+ linux,mtd-name = "spi-nand"; - }; - }; - diff --git a/target/linux/pistachio/patches-5.4/905-MIPS-DTS-img-marduk-Add-led-aliases.patch b/target/linux/pistachio/patches-5.4/905-MIPS-DTS-img-marduk-Add-led-aliases.patch deleted file mode 100644 index c6cf5acbb8..0000000000 --- a/target/linux/pistachio/patches-5.4/905-MIPS-DTS-img-marduk-Add-led-aliases.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/arch/mips/boot/dts/img/pistachio_marduk.dts -+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts -@@ -19,6 +19,11 @@ - ethernet0 = &enet; - spi0 = &spfi0; - spi1 = &spfi1; -+ -+ led-boot = &led_heartbeat; -+ led-failsafe = &led_heartbeat; -+ led-running = &led_heartbeat; -+ led-upgrade = &led_heartbeat; - }; - - chosen { -@@ -88,11 +93,10 @@ - - leds { - compatible = "pwm-leds"; -- heartbeat { -+ led_heartbeat: heartbeat { - label = "marduk:red:heartbeat"; - pwms = <&pwm 3 300000>; - max-brightness = <255>; -- linux,default-trigger = "heartbeat"; - }; - }; -