From: John Crispin Date: Mon, 2 Nov 2015 10:18:19 +0000 (+0000) Subject: ramips: add support for ZBT WG2626 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=165244a222bf466bd952bac38de1cbdd53a80113;p=openwrt%2Fstaging%2Fadrian.git ramips: add support for ZBT WG2626 Signed-off-by: Daniel Golle SVN-Revision: 47351 --- diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 21e3641778..382174298a 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -83,7 +83,8 @@ ramips_setup_interfaces() wsr-1166|\ wsr-600|\ wt1520|\ - y1) + y1|\ + zbt-wg2626) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 537675960f..e0dd92ab97 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -62,7 +62,8 @@ get_status_led() { rut5xx|\ v11st-fe|\ vocore|\ - wmr-300) + wmr-300|\ + zbt-wg2626) status_led="$board:green:status" ;; atp-52b|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 2ed09c9b33..62a79c505c 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -454,6 +454,9 @@ ramips_board_detect() { *"ZBT-WA05") name="zbt-wa05" ;; + *"ZBT-WG2626") + name="zbt-wg2626" + ;; *"ZBT-WR8305RT") name="zbt-wr8305rt" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 33ec8cc854..3d4b73afb6 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -132,6 +132,7 @@ platform_check_image() { y1|\ y1s|\ zbt-wa05|\ + zbt-wg2626|\ zbt-wr8305rt|\ zte-q7) [ "$magic" != "27051956" ] && { diff --git a/target/linux/ramips/dts/ZBT-WG2626.dts b/target/linux/ramips/dts/ZBT-WG2626.dts new file mode 100644 index 0000000000..6170454bc6 --- /dev/null +++ b/target/linux/ramips/dts/ZBT-WG2626.dts @@ -0,0 +1,127 @@ +/dts-v1/; + +/include/ "mt7621.dtsi" + +/ { + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; + model = "ZBT-WG2626"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + sdhci@10130000 { + status = "okay"; + }; + + palmbus@1E000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q128"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + + }; + }; + + i2c@900 { + compatible = "ralink,i2c-mt7621"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + status = "okay"; + }; + }; + + pcie@1e140000 { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + mediatek,5ghz = <0>; + }; + }; + }; + + ethernet@1e100000 { + mtd-mac-address = <&factory 0xe000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 18 1>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + status { + label = "zbt-wg2626:green:status"; + gpios = <&gpio0 24 1>; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio"; + ralink,function = "gpio"; + }; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index f1a0ec406e..5e19c3f97d 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -952,7 +952,7 @@ endif # ifeq ($(SUBTARGET),mt7621) - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626 endif define Device/mt7621 @@ -1002,6 +1002,11 @@ define Device/sap-g3200u3 DTS := SAP-G3200U3 endef +define Device/zbt-wg2626 + DTS := ZBT-WG2626 + IMAGE_SIZE := $(ralink_default_fw_size_16M) +endef + # # MT7628 Profiles # diff --git a/target/linux/ramips/mt7621/profiles/zbt.mk b/target/linux/ramips/mt7621/profiles/zbt.mk new file mode 100644 index 0000000000..0134bb54f8 --- /dev/null +++ b/target/linux/ramips/mt7621/profiles/zbt.mk @@ -0,0 +1,20 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/ZBT-WG2626 + NAME:=ZBT-WG2626 Device + FEATURES+=rtc + PACKAGES:=\ + kmod-usb-core kmod-usb3 kmod-sdhci-mt7620 \ + kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci \ + kmod-usb3-mt7621 +endef + +define Profile/ZBT-WG2626/Description + Package set for ZBT-WG2626 device +endef +$(eval $(call Profile,ZBT-WG2626))