From: Florian Fainelli Date: Thu, 4 Feb 2010 14:35:30 +0000 (+0000) Subject: add support for 2.6.32 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=16006896b4db541700822b05409178d02c799d3c;p=openwrt%2Fstaging%2Faparcar.git add support for 2.6.32 SVN-Revision: 19520 --- diff --git a/target/linux/rb532/config-default b/target/linux/rb532/config-default index 8114779047..5018a2faeb 100644 --- a/target/linux/rb532/config-default +++ b/target/linux/rb532/config-default @@ -1,33 +1,37 @@ CONFIG_32BIT=y # CONFIG_64BIT is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_AR7 is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_REQUIRE_GPIOLIB=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ATA=y +# CONFIG_ATA_PIIX is not set # CONFIG_BCM47XX is not set -# CONFIG_BINARY_PRINTF is not set +# CONFIG_BCM63XX is not set CONFIG_BITREVERSE=y CONFIG_BLK_DEV_SD=y CONFIG_BOOT_RAW=y # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K_LIB=y CONFIG_CEVT_R4K=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 # CONFIG_CPU_BIG_ENDIAN is not set # CONFIG_CPU_CAVIUM_OCTEON is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_PREFETCH=y CONFIG_CPU_HAS_SYNC=y CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_LOONGSON2E is not set +CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set -CONFIG_CPU_MIPS32=y # CONFIG_CPU_MIPS64_R1 is not set # CONFIG_CPU_MIPS64_R2 is not set CONFIG_CPU_MIPSR1=y @@ -49,8 +53,8 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_VR41XX is not set -CONFIG_CSRC_R4K_LIB=y CONFIG_CSRC_R4K=y +CONFIG_CSRC_R4K_LIB=y # CONFIG_DEBUG_FS is not set CONFIG_DECOMPRESS_LZMA=y CONFIG_DEVPORT=y @@ -59,8 +63,9 @@ CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_DMA_NONCOHERENT=y # CONFIG_ENABLE_WARN_DEPRECATED is not set CONFIG_EXT2_FS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_FSNOTIFY is not set CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -73,15 +78,14 @@ CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_HAVE_IDE=y -CONFIG_HAVE_MLOCK=y CONFIG_HAVE_OPROFILE=y # CONFIG_HIGH_RES_TIMERS is not set CONFIG_HW_HAS_PCI=y CONFIG_HW_RANDOM=y -# CONFIG_HZ_100 is not set CONFIG_HZ=250 +# CONFIG_HZ_100 is not set CONFIG_HZ_250=y CONFIG_IMAGE_CMDLINE_HACK=y CONFIG_INITRAMFS_SOURCE="" @@ -90,14 +94,15 @@ CONFIG_KEXEC=y CONFIG_KORINA=y # CONFIG_LEDS_GPIO is not set CONFIG_LEDS_MIKROTIK_RB532=y -# CONFIG_LEMOTE_FULONG is not set # CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MACH_TX39XX is not set # CONFIG_MACH_TX49XX is not set # CONFIG_MACH_VR41XX is not set CONFIG_MIKROTIK_RB532=y +CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set CONFIG_MIPS_L1_CACHE_SHIFT=4 # CONFIG_MIPS_MACHINE is not set @@ -106,16 +111,15 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_SIM is not set -CONFIG_MIPS=y CONFIG_MTD_BLOCK2MTD=y CONFIG_MTD_CFI_ADV_OPTIONS=y # CONFIG_MTD_CFI_AMDSTD is not set CONFIG_MTD_CFI_GEOMETRY=y # CONFIG_MTD_CFI_INTELEXT is not set # CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_NAND=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND=y CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_ROOTFS_ROOT_DEV is not set # CONFIG_MTD_ROOTFS_SPLIT is not set @@ -135,10 +139,10 @@ CONFIG_PCSPKR_PLATFORM=y # CONFIG_PROBE_INITRD_HEADER is not set CONFIG_RC32434_WDT=y CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_SCSI=y # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_PROC_FS is not set -CONFIG_SCSI=y # CONFIG_SERIAL_8250_EXTENDED is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -152,17 +156,17 @@ CONFIG_SCSI=y # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_SWARM is not set -# CONFIG_SLOW_WORK is not set CONFIG_SWAP_IO_SPACE=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_ARBIT_HZ=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y # CONFIG_TC35815 is not set -CONFIG_TRACING_SUPPORT=y CONFIG_TRAD_SIGNALS=y -CONFIG_VIA_RHINE_MMIO=y +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y CONFIG_VIA_RHINE=y +CONFIG_VIA_RHINE_MMIO=y CONFIG_YAFFS_9BYTE_TAGS=y # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set CONFIG_YAFFS_AUTO_YAFFS2=y diff --git a/target/linux/rb532/patches-2.6.30/001-cmdline_hack.patch b/target/linux/rb532/patches-2.6.30/001-cmdline_hack.patch new file mode 100644 index 0000000000..246e502b77 --- /dev/null +++ b/target/linux/rb532/patches-2.6.30/001-cmdline_hack.patch @@ -0,0 +1,20 @@ +--- a/arch/mips/rb532/prom.c ++++ b/arch/mips/rb532/prom.c +@@ -67,6 +67,7 @@ static inline unsigned long tag2ul(char + return simple_strtoul(num, 0, 10); + } + ++extern char __image_cmdline[]; + void __init prom_setup_cmdline(void) + { + char cmd_line[CL_SIZE]; +@@ -109,6 +110,9 @@ void __init prom_setup_cmdline(void) + } + *(cp++) = ' '; + ++ strcpy(cp,(__image_cmdline)); ++ cp += strlen(__image_cmdline); ++ + i = strlen(arcs_cmdline); + if (i > 0) { + *(cp++) = ' '; diff --git a/target/linux/rb532/patches-2.6.30/002-rb532_nand_fixup.patch b/target/linux/rb532/patches-2.6.30/002-rb532_nand_fixup.patch new file mode 100644 index 0000000000..82c191295f --- /dev/null +++ b/target/linux/rb532/patches-2.6.30/002-rb532_nand_fixup.patch @@ -0,0 +1,48 @@ +--- a/arch/mips/rb532/devices.c ++++ b/arch/mips/rb532/devices.c +@@ -140,6 +140,19 @@ static struct platform_device cf_slot0 = + }; + + /* Resources and device for NAND */ ++ ++/* ++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader ++ * will not be able to find the kernel that we load. So set the oobinfo ++ * when creating the partitions ++ */ ++static struct nand_ecclayout rb532_nand_ecclayout = { ++ .eccbytes = 6, ++ .eccpos = { 8, 9, 10, 13, 14, 15 }, ++ .oobavail = 9, ++ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } ++}; ++ + static int rb532_dev_ready(struct mtd_info *mtd) + { + return gpio_get_value(GPIO_RDY); +@@ -281,6 +294,16 @@ static void __init parse_mac_addr(char * + /* NAND definitions */ + #define NAND_CHIP_DELAY 25 + ++static int rb532_nand_fixup(struct mtd_info *mtd) ++{ ++ struct nand_chip *chip = mtd->priv; ++ ++ if (mtd->writesize == 512) ++ chip->ecc.layout = &rb532_nand_ecclayout; ++ ++ return 0; ++} ++ + static void __init rb532_nand_setup(void) + { + switch (mips_machtype) { +@@ -300,6 +323,8 @@ static void __init rb532_nand_setup(void + rb532_nand_data.chip.partitions = rb532_partition_info; + rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY; + rb532_nand_data.chip.options = NAND_NO_AUTOINCR; ++ ++ rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup; + } + + diff --git a/target/linux/rb532/patches-2.6.30/100-check_media.patch b/target/linux/rb532/patches-2.6.30/100-check_media.patch new file mode 100644 index 0000000000..66e731dac1 --- /dev/null +++ b/target/linux/rb532/patches-2.6.30/100-check_media.patch @@ -0,0 +1,51 @@ +--- a/drivers/net/korina.c ++++ b/drivers/net/korina.c +@@ -133,6 +133,7 @@ struct korina_private { + int dma_halt_cnt; + int dma_run_cnt; + struct napi_struct napi; ++ struct timer_list media_check_timer; + struct mii_if_info mii_if; + struct net_device *dev; + int phy_addr; +@@ -664,6 +665,15 @@ static void korina_check_media(struct ne + &lp->eth_regs->ethmac2); + } + ++static void korina_poll_media(unsigned long data) ++{ ++ struct net_device *dev = (struct net_device *) data; ++ struct korina_private *lp = netdev_priv(dev); ++ ++ korina_check_media(dev, 0); ++ mod_timer(&lp->media_check_timer, jiffies + HZ); ++} ++ + static void korina_set_carrier(struct mii_if_info *mii) + { + if (mii->force_media) { +@@ -1034,6 +1044,7 @@ static int korina_open(struct net_device + dev->name, lp->und_irq); + goto err_free_ovr_irq; + } ++ mod_timer(&lp->media_check_timer, jiffies + 1); + out: + return ret; + +@@ -1053,6 +1064,8 @@ static int korina_close(struct net_devic + struct korina_private *lp = netdev_priv(dev); + u32 tmp; + ++ del_timer(&lp->media_check_timer); ++ + /* Disable interrupts */ + disable_irq(lp->rx_irq); + disable_irq(lp->tx_irq); +@@ -1176,6 +1189,7 @@ static int korina_probe(struct platform_ + ": cannot register net device %d\n", rc); + goto probe_err_register; + } ++ setup_timer(&lp->media_check_timer, korina_poll_media, (unsigned long) dev); + out: + return rc; + diff --git a/target/linux/rb532/patches-2.6.32/001-cmdline_hack.patch b/target/linux/rb532/patches-2.6.32/001-cmdline_hack.patch new file mode 100644 index 0000000000..246e502b77 --- /dev/null +++ b/target/linux/rb532/patches-2.6.32/001-cmdline_hack.patch @@ -0,0 +1,20 @@ +--- a/arch/mips/rb532/prom.c ++++ b/arch/mips/rb532/prom.c +@@ -67,6 +67,7 @@ static inline unsigned long tag2ul(char + return simple_strtoul(num, 0, 10); + } + ++extern char __image_cmdline[]; + void __init prom_setup_cmdline(void) + { + char cmd_line[CL_SIZE]; +@@ -109,6 +110,9 @@ void __init prom_setup_cmdline(void) + } + *(cp++) = ' '; + ++ strcpy(cp,(__image_cmdline)); ++ cp += strlen(__image_cmdline); ++ + i = strlen(arcs_cmdline); + if (i > 0) { + *(cp++) = ' '; diff --git a/target/linux/rb532/patches-2.6.32/002-rb532_nand_fixup.patch b/target/linux/rb532/patches-2.6.32/002-rb532_nand_fixup.patch new file mode 100644 index 0000000000..82c191295f --- /dev/null +++ b/target/linux/rb532/patches-2.6.32/002-rb532_nand_fixup.patch @@ -0,0 +1,48 @@ +--- a/arch/mips/rb532/devices.c ++++ b/arch/mips/rb532/devices.c +@@ -140,6 +140,19 @@ static struct platform_device cf_slot0 = + }; + + /* Resources and device for NAND */ ++ ++/* ++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader ++ * will not be able to find the kernel that we load. So set the oobinfo ++ * when creating the partitions ++ */ ++static struct nand_ecclayout rb532_nand_ecclayout = { ++ .eccbytes = 6, ++ .eccpos = { 8, 9, 10, 13, 14, 15 }, ++ .oobavail = 9, ++ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } ++}; ++ + static int rb532_dev_ready(struct mtd_info *mtd) + { + return gpio_get_value(GPIO_RDY); +@@ -281,6 +294,16 @@ static void __init parse_mac_addr(char * + /* NAND definitions */ + #define NAND_CHIP_DELAY 25 + ++static int rb532_nand_fixup(struct mtd_info *mtd) ++{ ++ struct nand_chip *chip = mtd->priv; ++ ++ if (mtd->writesize == 512) ++ chip->ecc.layout = &rb532_nand_ecclayout; ++ ++ return 0; ++} ++ + static void __init rb532_nand_setup(void) + { + switch (mips_machtype) { +@@ -300,6 +323,8 @@ static void __init rb532_nand_setup(void + rb532_nand_data.chip.partitions = rb532_partition_info; + rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY; + rb532_nand_data.chip.options = NAND_NO_AUTOINCR; ++ ++ rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup; + } + + diff --git a/target/linux/rb532/patches/001-cmdline_hack.patch b/target/linux/rb532/patches/001-cmdline_hack.patch deleted file mode 100644 index 246e502b77..0000000000 --- a/target/linux/rb532/patches/001-cmdline_hack.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/arch/mips/rb532/prom.c -+++ b/arch/mips/rb532/prom.c -@@ -67,6 +67,7 @@ static inline unsigned long tag2ul(char - return simple_strtoul(num, 0, 10); - } - -+extern char __image_cmdline[]; - void __init prom_setup_cmdline(void) - { - char cmd_line[CL_SIZE]; -@@ -109,6 +110,9 @@ void __init prom_setup_cmdline(void) - } - *(cp++) = ' '; - -+ strcpy(cp,(__image_cmdline)); -+ cp += strlen(__image_cmdline); -+ - i = strlen(arcs_cmdline); - if (i > 0) { - *(cp++) = ' '; diff --git a/target/linux/rb532/patches/002-rb532_nand_fixup.patch b/target/linux/rb532/patches/002-rb532_nand_fixup.patch deleted file mode 100644 index 82c191295f..0000000000 --- a/target/linux/rb532/patches/002-rb532_nand_fixup.patch +++ /dev/null @@ -1,48 +0,0 @@ ---- a/arch/mips/rb532/devices.c -+++ b/arch/mips/rb532/devices.c -@@ -140,6 +140,19 @@ static struct platform_device cf_slot0 = - }; - - /* Resources and device for NAND */ -+ -+/* -+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader -+ * will not be able to find the kernel that we load. So set the oobinfo -+ * when creating the partitions -+ */ -+static struct nand_ecclayout rb532_nand_ecclayout = { -+ .eccbytes = 6, -+ .eccpos = { 8, 9, 10, 13, 14, 15 }, -+ .oobavail = 9, -+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } -+}; -+ - static int rb532_dev_ready(struct mtd_info *mtd) - { - return gpio_get_value(GPIO_RDY); -@@ -281,6 +294,16 @@ static void __init parse_mac_addr(char * - /* NAND definitions */ - #define NAND_CHIP_DELAY 25 - -+static int rb532_nand_fixup(struct mtd_info *mtd) -+{ -+ struct nand_chip *chip = mtd->priv; -+ -+ if (mtd->writesize == 512) -+ chip->ecc.layout = &rb532_nand_ecclayout; -+ -+ return 0; -+} -+ - static void __init rb532_nand_setup(void) - { - switch (mips_machtype) { -@@ -300,6 +323,8 @@ static void __init rb532_nand_setup(void - rb532_nand_data.chip.partitions = rb532_partition_info; - rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY; - rb532_nand_data.chip.options = NAND_NO_AUTOINCR; -+ -+ rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup; - } - - diff --git a/target/linux/rb532/patches/100-check_media.patch b/target/linux/rb532/patches/100-check_media.patch deleted file mode 100644 index 66e731dac1..0000000000 --- a/target/linux/rb532/patches/100-check_media.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/drivers/net/korina.c -+++ b/drivers/net/korina.c -@@ -133,6 +133,7 @@ struct korina_private { - int dma_halt_cnt; - int dma_run_cnt; - struct napi_struct napi; -+ struct timer_list media_check_timer; - struct mii_if_info mii_if; - struct net_device *dev; - int phy_addr; -@@ -664,6 +665,15 @@ static void korina_check_media(struct ne - &lp->eth_regs->ethmac2); - } - -+static void korina_poll_media(unsigned long data) -+{ -+ struct net_device *dev = (struct net_device *) data; -+ struct korina_private *lp = netdev_priv(dev); -+ -+ korina_check_media(dev, 0); -+ mod_timer(&lp->media_check_timer, jiffies + HZ); -+} -+ - static void korina_set_carrier(struct mii_if_info *mii) - { - if (mii->force_media) { -@@ -1034,6 +1044,7 @@ static int korina_open(struct net_device - dev->name, lp->und_irq); - goto err_free_ovr_irq; - } -+ mod_timer(&lp->media_check_timer, jiffies + 1); - out: - return ret; - -@@ -1053,6 +1064,8 @@ static int korina_close(struct net_devic - struct korina_private *lp = netdev_priv(dev); - u32 tmp; - -+ del_timer(&lp->media_check_timer); -+ - /* Disable interrupts */ - disable_irq(lp->rx_irq); - disable_irq(lp->tx_irq); -@@ -1176,6 +1189,7 @@ static int korina_probe(struct platform_ - ": cannot register net device %d\n", rc); - goto probe_err_register; - } -+ setup_timer(&lp->media_check_timer, korina_poll_media, (unsigned long) dev); - out: - return rc; -