From: David Bauer <mail@david-bauer.net>
Date: Fri, 30 Aug 2019 20:41:18 +0000 (+0200)
Subject: ramips: fix network setup for various NETGEAR boards
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=15d84131fe3e98de546f95e0f96f00d3c11fba38;p=openwrt%2Fstaging%2Fynezz.git

ramips: fix network setup for various NETGEAR boards

There are currently the following issues present for the Netgear R6220,
R6350 and WNDR3700 v5:

 - LAN and WAN MAC-addresses are inverted
 - WAN MAC-address is off. It are +2 compared to the LAN MAC-address
   (R6350 only)
 - Switchport order is inverted in LuCi

This commit fixes both these issues by assigning correct MAC-addresses
to LAN and WAN interfaces and defining the switchports with the correct
labels.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 13937a16d40693df67d3d39faa3a80644bdb7abf)
---

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 0f2afe0425..a5cfd8343a 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -114,8 +114,6 @@ ramips_setup_interfaces()
 	pbr-m1|\
 	psg1208|\
 	psg1218a|\
-	r6220|\
-	netgear,r6350|\
 	rt-n12p|\
 	sap-g3200u3|\
 	sk-wb8|\
@@ -130,7 +128,6 @@ ramips_setup_interfaces()
 	whr-g300n|\
 	mqmaker,witi-256m|\
 	mqmaker,witi-512m|\
-	wndr3700v5|\
 	youku-yk1|\
 	youku,yk-l2|\
 	zbt-ape522ii|\
@@ -355,7 +352,10 @@ ramips_setup_interfaces()
 			"0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
 		ucidef_set_interface_wan "usb0"
 		;;
-	netgear,r6120)
+	netgear,r6120|\
+	r6220|\
+	netgear,r6350|\
+	wndr3700v5)
 		ucidef_add_switch "switch0" \
 			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
 		;;
@@ -559,7 +559,8 @@ ramips_setup_macs()
 	e1700)
 		wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
 		;;
-	edimax,br-6478ac-v2)
+	edimax,br-6478ac-v2|\
+	netgear,r6350)
 		lan_mac=$(cat /sys/class/net/eth0/address)
 		wan_mac=$(macaddr_add "$lan_mac" 2)
 		;;
@@ -628,12 +629,6 @@ ramips_setup_macs()
 		lan_mac=$(mtd_get_mac_binary factory 40)
 		wan_mac=$(mtd_get_mac_binary factory 46)
 		;;
-	r6220|\
-	netgear,r6350|\
-	wndr3700v5)
-		wan_mac=$(mtd_get_mac_binary factory 4)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		;;
 	rt-n56u)
 		lan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_setbit_la "$lan_mac")