From: Zoltan Herpai Date: Fri, 9 Jan 2015 19:19:35 +0000 (+0000) Subject: uboot-sunxi: various updates - use mainline uboot-sunxi version (2015.01-rc3) - add... X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=157e1da749c95589631dbedd6ce4ef79e0dad1cb;p=openwrt%2Fstaging%2Fyousong.git uboot-sunxi: various updates - use mainline uboot-sunxi version (2015.01-rc3) - add support for Bananapro Signed-off-by: Zoltan HERPAI SVN-Revision: 43899 --- diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile index e650051b7b..eb66cab471 100644 --- a/package/boot/uboot-sunxi/Makefile +++ b/package/boot/uboot-sunxi/Makefile @@ -8,12 +8,12 @@ include $(TOPDIR)/rules.mk PKG_NAME:=u-boot -PKG_VERSION:=2014.04 +PKG_VERSION:=2015.01-rc3 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_URL:= \ http://mirror2.openwrt.org/sources \ ftp://ftp.denx.de/pub/u-boot -PKG_SOURCE_VERSION:=6d2116d1385a66e9a59742caa9d62a54 +PKG_SOURCE_VERSION:=e680848838ca20a60d43b66a218d865b PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) PKG_LICENSE:=GPL-2.0 GPL-2.0+ @@ -35,7 +35,7 @@ define uboot/A13-OLinuXino TITLE:=U-Boot for the A13 OlinuXino endef -define uboot/A20-OLinuXino_Lime +define uboot/A20-OLinuXino-Lime TITLE:=U-Boot for the A20 OLinuXino LIME endef @@ -47,6 +47,10 @@ define uboot/Bananapi TITLE:=U-Boot for Bananapi endef +define uboot/Bananapro + TITLE:=U-Boot for Bananapro +endef + define uboot/Cubieboard TITLE:=U-Boot for Cubieboard endef @@ -63,12 +67,16 @@ define uboot/Hackberry TITLE:=U-Boot for the Hackbeery endef +define uboot/Mele_M9 + TITLE:=U-Boot for the Mele M9 (A31) +endef + define uboot/OLIMEX-A13-SOM TITLE:=U-Boot for the Olimex A13 SOM endef -define uboot/pcDuino - TITLE:=U-Boot for pcDuino +define uboot/Linksprite_pcDuino + TITLE:=U-Boot for Linksprite pcDuino endef define uboot/Linksprite_pcDuino3 @@ -78,15 +86,17 @@ endef UBOOTS:= \ A10-OLinuXino-Lime \ A13-OLinuXino \ - A20-OLinuXino_Lime \ + A20-OLinuXino-Lime \ A20-OLinuXino_MICRO \ Bananapi \ + Bananapro \ Cubieboard \ Cubieboard2 \ Cubietruck \ Hackberry \ + Mele_M9 \ OLIMEX-A13-SOM \ - pcDuino \ + Linksprite_pcDuino \ Linksprite_pcDuino3 \ define Package/uboot/template @@ -115,7 +125,7 @@ endif define Build/Configure $(MAKE) -C $(PKG_BUILD_DIR) \ - USE_PRIVATE_LIBGCC=yes $(UBOOT_CONFIG)_config + USE_PRIVATE_LIBGCC=yes $(UBOOT_CONFIG)_defconfig endef define Build/Compile @@ -133,6 +143,7 @@ define Package/uboot/install/default $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-u-boot-with-spl.bin $(CP) uEnv.txt \ $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-uEnv.txt + mkimage -C none -A arm -T script -d $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-uEnv.txt $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-boot.scr endef define Package/uboot/install/template diff --git a/package/boot/uboot-sunxi/patches/001-u-boot-trunk-3e1ded1fff32d8af8cc5eec22c56797621ea6649.patch b/package/boot/uboot-sunxi/patches/001-u-boot-trunk-3e1ded1fff32d8af8cc5eec22c56797621ea6649.patch new file mode 100644 index 0000000000..fc99523e8e --- /dev/null +++ b/package/boot/uboot-sunxi/patches/001-u-boot-trunk-3e1ded1fff32d8af8cc5eec22c56797621ea6649.patch @@ -0,0 +1,25006 @@ +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c u-boot/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c 2015-01-01 17:34:32.005507318 +0100 +@@ -209,6 +209,10 @@ + .gate = SW_ONLY_GATE(0x0360, 20, 4), + }; + ++static struct bus_clk_data usb_otg_ahb_data = { ++ .gate = HW_SW_GATE_AUTO(0x0348, 16, 0, 1), ++}; ++ + static struct bus_clk_data sdio1_ahb_data = { + .gate = HW_SW_GATE_AUTO(0x0358, 16, 0, 1), + }; +@@ -331,6 +335,17 @@ + */ + + /* KPM bus clocks */ ++static struct bus_clock usb_otg_ahb_clk = { ++ .clk = { ++ .name = "usb_otg_ahb_clk", ++ .parent = &kpm_ccu_clk.clk, ++ .ops = &bus_clk_ops, ++ .ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR, ++ }, ++ .freq_tbl = master_ahb_freq_tbl, ++ .data = &usb_otg_ahb_data, ++}; ++ + static struct bus_clock sdio1_ahb_clk = { + .clk = { + .name = "sdio1_ahb_clk", +@@ -541,6 +556,7 @@ + CLK_LK(bsc2), + CLK_LK(bsc3), + /* Bus clocks */ ++ CLK_LK(usb_otg_ahb), + CLK_LK(sdio1_ahb), + CLK_LK(sdio2_ahb), + CLK_LK(sdio3_ahb), +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c u-boot/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c 2015-01-01 17:34:32.005507318 +0100 +@@ -0,0 +1,27 @@ ++/* ++ * Copyright 2014 Broadcom Corporation. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include "clk-core.h" ++ ++/* Enable appropriate clocks for the USB OTG port */ ++int clk_usb_otg_enable(void *base) ++{ ++ char *ahbstr; ++ ++ switch ((u32) base) { ++ case HSOTG_BASE_ADDR: ++ ahbstr = "usb_otg_ahb_clk"; ++ break; ++ default: ++ printf("%s: base 0x%p not found\n", __func__, base); ++ return -EINVAL; ++ } ++ ++ return clk_get_and_enable(ahbstr); ++} +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/Makefile u-boot/arch/arm/cpu/armv7/bcm281xx/Makefile +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/bcm281xx/Makefile 2015-01-01 17:34:32.005507318 +0100 +@@ -10,3 +10,4 @@ + obj-y += clk-sdio.o + obj-y += clk-bsc.o + obj-$(CONFIG_BCM_SF2_ETH) += clk-eth.o ++obj-y += clk-usb-otg.o +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/kona-common/clk-stubs.c u-boot/arch/arm/cpu/armv7/kona-common/clk-stubs.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/kona-common/clk-stubs.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/kona-common/clk-stubs.c 2015-01-01 17:34:32.009507252 +0100 +@@ -19,3 +19,8 @@ + { + return 0; + } ++ ++int __weak clk_usb_otg_enable(void *base) ++{ ++ return 0; ++} +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/cpu.c u-boot/arch/arm/cpu/armv7/ls102xa/cpu.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/cpu.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/ls102xa/cpu.c 2015-01-01 17:34:32.009507252 +0100 +@@ -12,6 +12,8 @@ + #include + #include + ++#include "fsl_epu.h" ++ + DECLARE_GLOBAL_DATA_PTR; + + #if defined(CONFIG_DISPLAY_CPUINFO) +@@ -101,3 +103,35 @@ + + return 0; + } ++ ++int arch_cpu_init(void) ++{ ++ void *epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET); ++ ++ /* ++ * After wakeup from deep sleep, Clear EPU registers ++ * as early as possible to prevent from possible issue. ++ * It's also safe to clear at normal boot. ++ */ ++ fsl_epu_clean(epu_base); ++ ++ return 0; ++} ++ ++#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT) ++/* Set the address at which the secondary core starts from.*/ ++void smp_set_core_boot_addr(unsigned long addr, int corenr) ++{ ++ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); ++ ++ out_be32(&gur->scratchrw[0], addr); ++} ++ ++/* Release the secondary core from holdoff state and kick it */ ++void smp_kick_all_cpus(void) ++{ ++ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); ++ ++ out_be32(&gur->brrl, 0x2); ++} ++#endif +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fdt.c u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fdt.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c 2015-01-01 17:34:32.009507252 +0100 +@@ -91,7 +91,7 @@ + } + + do_fixup_by_prop_u32(blob, "device_type", "soc", +- 4, "bus-frequency", busclk / 2, 1); ++ 4, "bus-frequency", busclk, 1); + + ft_fixup_enet_phy_connect_type(blob); + +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fsl_epu.c u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fsl_epu.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.c 2015-01-01 17:34:32.009507252 +0100 +@@ -0,0 +1,57 @@ ++/* ++ * Copyright 2014 Freescale Semiconductor, Inc. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++ ++#include "fsl_epu.h" ++ ++/** ++ * fsl_epu_clean - Clear EPU registers ++ */ ++void fsl_epu_clean(void *epu_base) ++{ ++ u32 offset; ++ ++ /* follow the exact sequence to clear the registers */ ++ /* Clear EPACRn */ ++ for (offset = EPACR0; offset <= EPACR15; offset += EPACR_STRIDE) ++ out_be32(epu_base + offset, 0); ++ ++ /* Clear EPEVTCRn */ ++ for (offset = EPEVTCR0; offset <= EPEVTCR9; offset += EPEVTCR_STRIDE) ++ out_be32(epu_base + offset, 0); ++ ++ /* Clear EPGCR */ ++ out_be32(epu_base + EPGCR, 0); ++ ++ /* Clear EPSMCRn */ ++ for (offset = EPSMCR0; offset <= EPSMCR15; offset += EPSMCR_STRIDE) ++ out_be32(epu_base + offset, 0); ++ ++ /* Clear EPCCRn */ ++ for (offset = EPCCR0; offset <= EPCCR31; offset += EPCCR_STRIDE) ++ out_be32(epu_base + offset, 0); ++ ++ /* Clear EPCMPRn */ ++ for (offset = EPCMPR0; offset <= EPCMPR31; offset += EPCMPR_STRIDE) ++ out_be32(epu_base + offset, 0); ++ ++ /* Clear EPCTRn */ ++ for (offset = EPCTR0; offset <= EPCTR31; offset += EPCTR_STRIDE) ++ out_be32(epu_base + offset, 0); ++ ++ /* Clear EPIMCRn */ ++ for (offset = EPIMCR0; offset <= EPIMCR31; offset += EPIMCR_STRIDE) ++ out_be32(epu_base + offset, 0); ++ ++ /* Clear EPXTRIGCRn */ ++ out_be32(epu_base + EPXTRIGCR, 0); ++ ++ /* Clear EPECRn */ ++ for (offset = EPECR0; offset <= EPECR15; offset += EPECR_STRIDE) ++ out_be32(epu_base + offset, 0); ++} +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fsl_epu.h u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.h +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fsl_epu.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.h 2015-01-01 17:34:32.009507252 +0100 +@@ -0,0 +1,68 @@ ++/* ++ * Copyright 2014 Freescale Semiconductor, Inc. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __FSL_EPU_H ++#define __FSL_EPU_H ++ ++#include ++ ++#define FSL_STRIDE_4B 4 ++#define FSL_STRIDE_8B 8 ++ ++/* Block offsets */ ++#define EPU_BLOCK_OFFSET 0x00000000 ++ ++/* EPGCR (Event Processor Global Control Register) */ ++#define EPGCR 0x000 ++ ++/* EPEVTCR0-9 (Event Processor EVT Pin Control Registers) */ ++#define EPEVTCR0 0x050 ++#define EPEVTCR9 0x074 ++#define EPEVTCR_STRIDE FSL_STRIDE_4B ++ ++/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */ ++#define EPXTRIGCR 0x090 ++ ++/* EPIMCR0-31 (Event Processor Input Mux Control Registers) */ ++#define EPIMCR0 0x100 ++#define EPIMCR31 0x17C ++#define EPIMCR_STRIDE FSL_STRIDE_4B ++ ++/* EPSMCR0-15 (Event Processor SCU Mux Control Registers) */ ++#define EPSMCR0 0x200 ++#define EPSMCR15 0x278 ++#define EPSMCR_STRIDE FSL_STRIDE_8B ++ ++/* EPECR0-15 (Event Processor Event Control Registers) */ ++#define EPECR0 0x300 ++#define EPECR15 0x33C ++#define EPECR_STRIDE FSL_STRIDE_4B ++ ++/* EPACR0-15 (Event Processor Action Control Registers) */ ++#define EPACR0 0x400 ++#define EPACR15 0x43C ++#define EPACR_STRIDE FSL_STRIDE_4B ++ ++/* EPCCRi0-15 (Event Processor Counter Control Registers) */ ++#define EPCCR0 0x800 ++#define EPCCR15 0x83C ++#define EPCCR31 0x87C ++#define EPCCR_STRIDE FSL_STRIDE_4B ++ ++/* EPCMPR0-15 (Event Processor Counter Compare Registers) */ ++#define EPCMPR0 0x900 ++#define EPCMPR15 0x93C ++#define EPCMPR31 0x97C ++#define EPCMPR_STRIDE FSL_STRIDE_4B ++ ++/* EPCTR0-31 (Event Processor Counter Register) */ ++#define EPCTR0 0xA00 ++#define EPCTR31 0xA7C ++#define EPCTR_STRIDE FSL_STRIDE_4B ++ ++void fsl_epu_clean(void *epu_base); ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/Makefile u-boot/arch/arm/cpu/armv7/ls102xa/Makefile +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/ls102xa/Makefile 2015-01-01 17:34:32.009507252 +0100 +@@ -7,6 +7,8 @@ + obj-y += cpu.o + obj-y += clock.o + obj-y += timer.o ++obj-y += fsl_epu.o + + obj-$(CONFIG_OF_LIBFDT) += fdt.o + obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o ++obj-$(CONFIG_SPL) += spl.o +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/spl.c u-boot/arch/arm/cpu/armv7/ls102xa/spl.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/spl.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/ls102xa/spl.c 2015-01-01 17:34:32.009507252 +0100 +@@ -0,0 +1,33 @@ ++/* ++ * Copyright 2014 Freescale Semiconductor, Inc. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++ ++u32 spl_boot_device(void) ++{ ++#ifdef CONFIG_SPL_MMC_SUPPORT ++ return BOOT_DEVICE_MMC1; ++#endif ++ return BOOT_DEVICE_NAND; ++} ++ ++u32 spl_boot_mode(void) ++{ ++ switch (spl_boot_device()) { ++ case BOOT_DEVICE_MMC1: ++#ifdef CONFIG_SPL_FAT_SUPPORT ++ return MMCSD_MODE_FAT; ++#else ++ return MMCSD_MODE_RAW; ++#endif ++ case BOOT_DEVICE_NAND: ++ return 0; ++ default: ++ puts("spl: error: unsupported device\n"); ++ hang(); ++ } ++} +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/Makefile u-boot/arch/arm/cpu/armv7/Makefile +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/Makefile 2015-01-01 17:34:32.001507383 +0100 +@@ -56,6 +56,7 @@ + obj-$(CONFIG_RMOBILE) += rmobile/ + obj-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx/ + obj-$(CONFIG_SOCFPGA) += socfpga/ ++obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/ + obj-$(CONFIG_ARCH_SUNXI) += sunxi/ + obj-$(CONFIG_TEGRA20) += tegra20/ + obj-$(CONFIG_U8500) += u8500/ +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/mx6/clock.c u-boot/arch/arm/cpu/armv7/mx6/clock.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/mx6/clock.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/mx6/clock.c 2015-01-01 17:34:32.009507252 +0100 +@@ -443,7 +443,7 @@ + struct anatop_regs __iomem *anatop = + (struct anatop_regs __iomem *)ANATOP_BASE_ADDR; + +- if (freq < ENET_25MHz || freq > ENET_125MHz) ++ if (freq < ENET_25MHZ || freq > ENET_125MHZ) + return -EINVAL; + + reg = readl(&anatop->pll_enet); +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/nonsec_virt.S u-boot/arch/arm/cpu/armv7/nonsec_virt.S +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/nonsec_virt.S 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/nonsec_virt.S 2015-01-01 17:34:32.013507186 +0100 +@@ -169,11 +169,11 @@ + * we do this here instead. + * But first check if we have the generic timer. + */ +-#ifdef CONFIG_SYS_CLK_FREQ ++#ifdef CONFIG_TIMER_CLK_FREQ + mrc p15, 0, r0, c0, c1, 1 @ read ID_PFR1 + and r0, r0, #CPUID_ARM_GENTIMER_MASK @ mask arch timer bits + cmp r0, #(1 << CPUID_ARM_GENTIMER_SHIFT) +- ldreq r1, =CONFIG_SYS_CLK_FREQ ++ ldreq r1, =CONFIG_TIMER_CLK_FREQ + mcreq p15, 0, r1, c14, c0, 0 @ write CNTFRQ + #endif + +@@ -191,6 +191,9 @@ + wfi + ldr r1, =CONFIG_SMP_PEN_ADDR @ load start address + ldr r1, [r1] ++#ifdef CONFIG_PEN_ADDR_BIG_ENDIAN ++ rev r1, r1 ++#endif + cmp r0, r1 @ make sure we dont execute this code + beq smp_waitloop @ again (due to a spurious wakeup) + mov r0, r1 +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/socfpga/freeze_controller.c u-boot/arch/arm/cpu/armv7/socfpga/freeze_controller.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/socfpga/freeze_controller.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/socfpga/freeze_controller.c 2015-01-01 17:34:32.021507054 +0100 +@@ -38,8 +38,7 @@ + /* Freeze channel 0 to 2 */ + for (channel_id = 0; channel_id <= 2; channel_id++) { + ioctrl_reg_offset = (u32)( +- &freeze_controller_base->vioctrl + +- (channel_id << SYSMGR_FRZCTRL_VIOCTRL_SHIFT)); ++ &freeze_controller_base->vioctrl + channel_id); + + /* + * Assert active low enrnsl, plniotri +@@ -120,8 +119,7 @@ + /* Thaw channel 0 to 2 */ + for (channel_id = 0; channel_id <= 2; channel_id++) { + ioctrl_reg_offset +- = (u32)(&freeze_controller_base->vioctrl +- + (channel_id << SYSMGR_FRZCTRL_VIOCTRL_SHIFT)); ++ = (u32)(&freeze_controller_base->vioctrl + channel_id); + + /* + * Assert active low bhniotri signal and +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/socfpga/reset_manager.c u-boot/arch/arm/cpu/armv7/socfpga/reset_manager.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/socfpga/reset_manager.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/socfpga/reset_manager.c 2015-01-01 17:34:32.021507054 +0100 +@@ -110,6 +110,6 @@ + { + const void *reset = &reset_manager_base->per_mod_reset; + +- clrbits_le32(reset, 1 << RSTMGR_PERMODRST_SPIM0_LSB); +- clrbits_le32(reset, 1 << RSTMGR_PERMODRST_SPIM1_LSB); ++ clrbits_le32(reset, (1 << RSTMGR_PERMODRST_SPIM0_LSB) | ++ (1 << RSTMGR_PERMODRST_SPIM1_LSB)); + } +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/clock.c u-boot/arch/arm/cpu/armv7/stv0991/clock.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/clock.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/stv0991/clock.c 2015-01-01 17:34:32.025506990 +0100 +@@ -0,0 +1,41 @@ ++/* ++ * (C) Copyright 2014 ++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++ ++static struct stv0991_cgu_regs *const stv0991_cgu_regs = \ ++ (struct stv0991_cgu_regs *) (CGU_BASE_ADDR); ++ ++void enable_pll1(void) ++{ ++ /* pll1 already configured for 1000Mhz, just need to enable it */ ++ writel(readl(&stv0991_cgu_regs->pll1_ctrl) & ~(0x01), ++ &stv0991_cgu_regs->pll1_ctrl); ++} ++ ++void clock_setup(int peripheral) ++{ ++ switch (peripheral) { ++ case UART_CLOCK_CFG: ++ writel(UART_CLK_CFG, &stv0991_cgu_regs->uart_freq); ++ break; ++ case ETH_CLOCK_CFG: ++ enable_pll1(); ++ writel(ETH_CLK_CFG, &stv0991_cgu_regs->eth_freq); ++ ++ /* Clock selection for ethernet tx_clk & rx_clk*/ ++ writel((readl(&stv0991_cgu_regs->eth_ctrl) & ETH_CLK_MASK) ++ | ETH_CLK_CTRL, &stv0991_cgu_regs->eth_ctrl); ++ ++ break; ++ default: ++ break; ++ } ++} +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/lowlevel.S u-boot/arch/arm/cpu/armv7/stv0991/lowlevel.S +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/lowlevel.S 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/stv0991/lowlevel.S 2015-01-01 17:34:32.025506990 +0100 +@@ -0,0 +1,12 @@ ++/* ++ * (C) Copyright 2014 stmicroelectronics ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++ ++ENTRY(lowlevel_init) ++ mov pc, lr ++ENDPROC(lowlevel_init) +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/Makefile u-boot/arch/arm/cpu/armv7/stv0991/Makefile +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/stv0991/Makefile 2015-01-01 17:34:32.025506990 +0100 +@@ -0,0 +1,9 @@ ++# ++# (C) Copyright 2014 ++# Vikas Manocha, ST Microelectronics, vikas.manocha@stcom ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++obj-y := timer.o clock.o pinmux.o reset.o ++obj-y += lowlevel.o +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/pinmux.c u-boot/arch/arm/cpu/armv7/stv0991/pinmux.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/pinmux.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/stv0991/pinmux.c 2015-01-01 17:34:32.025506990 +0100 +@@ -0,0 +1,62 @@ ++/* ++ * (C) Copyright 2014 ++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++ ++static struct stv0991_creg *const stv0991_creg = \ ++ (struct stv0991_creg *)CREG_BASE_ADDR; ++ ++int stv0991_pinmux_config(int peripheral) ++{ ++ switch (peripheral) { ++ case UART_GPIOC_30_31: ++ /* SSDA/SSCL pad muxing to UART Rx/Dx */ ++ writel((readl(&stv0991_creg->mux12) & GPIOC_31_MUX_MASK) | ++ CFG_GPIOC_31_UART_RX, ++ &stv0991_creg->mux12); ++ writel((readl(&stv0991_creg->mux12) & GPIOC_30_MUX_MASK) | ++ CFG_GPIOC_30_UART_TX, ++ &stv0991_creg->mux12); ++ /* SSDA/SSCL pad config to push pull*/ ++ writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_31_MODE_MASK) | ++ CFG_GPIOC_31_MODE_PP, ++ &stv0991_creg->cfg_pad6); ++ writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_30_MODE_MASK) | ++ CFG_GPIOC_30_MODE_HIGH, ++ &stv0991_creg->cfg_pad6); ++ break; ++ case UART_GPIOB_16_17: ++ /* ethernet rx_6/7 to UART Rx/Dx */ ++ writel((readl(&stv0991_creg->mux7) & GPIOB_17_MUX_MASK) | ++ CFG_GPIOB_17_UART_RX, ++ &stv0991_creg->mux7); ++ writel((readl(&stv0991_creg->mux7) & GPIOB_16_MUX_MASK) | ++ CFG_GPIOB_16_UART_TX, ++ &stv0991_creg->mux7); ++ break; ++ case ETH_GPIOB_10_31_C_0_4: ++ writel(readl(&stv0991_creg->mux6) & 0x000000FF, ++ &stv0991_creg->mux6); ++ writel(0x00000000, &stv0991_creg->mux7); ++ writel(0x00000000, &stv0991_creg->mux8); ++ writel(readl(&stv0991_creg->mux9) & 0xFFF00000, ++ &stv0991_creg->mux9); ++ /* Ethernet Voltage configuration to 1.8V*/ ++ writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) | ++ ETH_VDD_CFG, &stv0991_creg->vdd_pad1); ++ writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) | ++ ETH_M_VDD_CFG, &stv0991_creg->vdd_pad1); ++ ++ break; ++ default: ++ break; ++ } ++ return 0; ++} +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/reset.c u-boot/arch/arm/cpu/armv7/stv0991/reset.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/reset.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/stv0991/reset.c 2015-01-01 17:34:32.025506990 +0100 +@@ -0,0 +1,26 @@ ++/* ++ * (C) Copyright 2014 ++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++void reset_cpu(ulong ignored) ++{ ++ puts("System is going to reboot ...\n"); ++ /* ++ * This 1 second delay will allow the above message ++ * to be printed before reset ++ */ ++ udelay((1000 * 1000)); ++ ++ /* Setting bit 1 of the WDRU unit will reset the SoC */ ++ writel(WDRU_RST_SYS, &stv0991_wd_ru_ptr->wdru_ctrl1); ++ ++ /* system will restart */ ++ while (1) ++ ; ++} +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/timer.c u-boot/arch/arm/cpu/armv7/stv0991/timer.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/timer.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/stv0991/timer.c 2015-01-01 17:34:32.025506990 +0100 +@@ -0,0 +1,114 @@ ++/* ++ * (C) Copyright 2014 ++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++static struct stv0991_cgu_regs *const stv0991_cgu_regs = \ ++ (struct stv0991_cgu_regs *) (CGU_BASE_ADDR); ++ ++#define READ_TIMER() (readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING) ++#define GPT_RESOLUTION (CONFIG_STV0991_HZ_CLOCK / CONFIG_STV0991_HZ) ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#define timestamp gd->arch.tbl ++#define lastdec gd->arch.lastinc ++ ++int timer_init(void) ++{ ++ /* Timer1 clock configuration */ ++ writel(TIMER1_CLK_CFG, &stv0991_cgu_regs->tim_freq); ++ writel(readl(&stv0991_cgu_regs->cgu_enable_2) | ++ TIMER1_CLK_EN, &stv0991_cgu_regs->cgu_enable_2); ++ ++ /* Stop the timer */ ++ writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1); ++ writel(GPT_PRESCALER_128, &gpt1_regs_ptr->psc); ++ /* Configure timer for auto-reload */ ++ writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD, ++ &gpt1_regs_ptr->cr1); ++ ++ /* load value for free running */ ++ writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr); ++ ++ /* start timer */ ++ writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN, ++ &gpt1_regs_ptr->cr1); ++ ++ /* Reset the timer */ ++ lastdec = READ_TIMER(); ++ timestamp = 0; ++ ++ return 0; ++} ++ ++/* ++ * timer without interrupts ++ */ ++ulong get_timer(ulong base) ++{ ++ return (get_timer_masked() / GPT_RESOLUTION) - base; ++} ++ ++void __udelay(unsigned long usec) ++{ ++ ulong tmo; ++ ulong start = get_timer_masked(); ++ ulong tenudelcnt = CONFIG_STV0991_HZ_CLOCK / (1000 * 100); ++ ulong rndoff; ++ ++ rndoff = (usec % 10) ? 1 : 0; ++ ++ /* tenudelcnt timer tick gives 10 microsecconds delay */ ++ tmo = ((usec / 10) + rndoff) * tenudelcnt; ++ ++ while ((ulong) (get_timer_masked() - start) < tmo) ++ ; ++} ++ ++ulong get_timer_masked(void) ++{ ++ ulong now = READ_TIMER(); ++ ++ if (now >= lastdec) { ++ /* normal mode */ ++ timestamp += now - lastdec; ++ } else { ++ /* we have an overflow ... */ ++ timestamp += now + GPT_FREE_RUNNING - lastdec; ++ } ++ lastdec = now; ++ ++ return timestamp; ++} ++ ++void udelay_masked(unsigned long usec) ++{ ++ return udelay(usec); ++} ++ ++/* ++ * This function is derived from PowerPC code (read timebase as long long). ++ * On ARM it just returns the timer value. ++ */ ++unsigned long long get_ticks(void) ++{ ++ return get_timer(0); ++} ++ ++/* ++ * This function is derived from PowerPC code (timebase clock frequency). ++ * On ARM it returns the number of timer ticks per second. ++ */ ++ulong get_tbclk(void) ++{ ++ return CONFIG_STV0991_HZ; ++} +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/tegra124/Kconfig u-boot/arch/arm/cpu/armv7/tegra124/Kconfig +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/tegra124/Kconfig 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/tegra124/Kconfig 2015-01-01 17:34:32.025506990 +0100 +@@ -6,6 +6,15 @@ + config TARGET_JETSON_TK1 + bool "NVIDIA Tegra124 Jetson TK1 board" + ++config TARGET_NYAN_BIG ++ bool "Google/NVIDIA Nyan-big Chrombook" ++ help ++ Nyan Big is a Tegra124 clamshell board that is very similar ++ to venice2, but it has a different panel, the sdcard CD and WP ++ sense are flipped, and it has a different revision of the AS3722 ++ PMIC. The retail name is the Acer Chromebook 13 CB5-311-T7NN ++ (13.3-inch HD, NVIDIA Tegra K1, 2GB). ++ + config TARGET_VENICE2 + bool "NVIDIA Tegra124 Venice2" + +@@ -15,6 +24,7 @@ + default "tegra124" + + source "board/nvidia/jetson-tk1/Kconfig" ++source "board/nvidia/nyan-big/Kconfig" + source "board/nvidia/venice2/Kconfig" + + endif +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/uniphier/init_page_table.c u-boot/arch/arm/cpu/armv7/uniphier/init_page_table.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/uniphier/init_page_table.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/uniphier/init_page_table.c 2015-01-01 17:34:32.029506924 +0100 +@@ -17,11 +17,7 @@ + #define REG DEVICE /* IO Register: Device */ + #define DDR DEVICE /* DDR SDRAM: Device */ + +-#ifdef CONFIG_SPL_BUILD + #define IS_SPL_TEXT_AREA(x) ((x) == ((CONFIG_SPL_TEXT_BASE) >> 20)) +-#else +-#define IS_SPL_TEXT_AREA(x) ((x) == ((CONFIG_SYS_TEXT_BASE) >> 20)) +-#endif + + #define IS_INIT_STACK_AREA(x) ((x) == ((CONFIG_SYS_INIT_SP_ADDR) >> 20)) + +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/vf610/generic.c u-boot/arch/arm/cpu/armv7/vf610/generic.c +--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/vf610/generic.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/armv7/vf610/generic.c 2015-01-01 17:34:32.029506924 +0100 +@@ -265,20 +265,21 @@ + + cause = readl(&src_regs->srsr); + writel(cause, &src_regs->srsr); +- cause &= 0xff; + +- switch (cause) { +- case 0x08: +- return "WDOG"; +- case 0x20: ++ if (cause & SRC_SRSR_POR_RST) ++ return "POWER ON RESET"; ++ else if (cause & SRC_SRSR_WDOG_A5) ++ return "WDOG A5"; ++ else if (cause & SRC_SRSR_WDOG_M4) ++ return "WDOG M4"; ++ else if (cause & SRC_SRSR_JTAG_RST) + return "JTAG HIGH-Z"; +- case 0x80: ++ else if (cause & SRC_SRSR_SW_RST) ++ return "SW RESET"; ++ else if (cause & SRC_SRSR_RESETB) + return "EXTERNAL RESET"; +- case 0xfd: +- return "POR"; +- default: ++ else + return "unknown reset"; +- } + } + + int print_cpuinfo(void) +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/tegra20-common/pmu.c u-boot/arch/arm/cpu/tegra20-common/pmu.c +--- u-boot-2015.01-rc3/arch/arm/cpu/tegra20-common/pmu.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/tegra20-common/pmu.c 2015-01-01 17:34:32.037506793 +0100 +@@ -6,6 +6,7 @@ + */ + + #include ++#include + #include + #include + #include +@@ -23,9 +24,13 @@ + #define VDD_TRANSITION_STEP 0x06 /* 150mv */ + #define VDD_TRANSITION_RATE 0x06 /* 3.52mv/us */ + ++#define PMI_I2C_ADDRESS 0x34 /* chip requires this address */ ++ + int pmu_set_nominal(void) + { +- int core, cpu, bus; ++ struct udevice *bus, *dev; ++ int core, cpu; ++ int ret; + + /* by default, the table has been filled with T25 settings */ + switch (tegra_get_chip_sku()) { +@@ -42,12 +47,18 @@ + return -1; + } + +- bus = tegra_i2c_get_dvc_bus_num(); +- if (bus == -1) { ++ ret = tegra_i2c_get_dvc_bus(&bus); ++ if (ret) { + debug("%s: Cannot find DVC I2C bus\n", __func__); +- return -1; ++ return ret; + } +- tps6586x_init(bus); ++ ret = i2c_get_chip(bus, PMI_I2C_ADDRESS, &dev); ++ if (ret) { ++ debug("%s: Cannot find DVC I2C chip\n", __func__); ++ return ret; ++ } ++ ++ tps6586x_init(dev); + tps6586x_set_pwm_mode(TPS6586X_PWM_SM1); + return tps6586x_adjust_sm0_sm1(core, cpu, VDD_TRANSITION_STEP, + VDD_TRANSITION_RATE, VDD_RELATION); +diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/u-boot-spl.lds u-boot/arch/arm/cpu/u-boot-spl.lds +--- u-boot-2015.01-rc3/arch/arm/cpu/u-boot-spl.lds 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/cpu/u-boot-spl.lds 2015-01-01 17:34:32.037506793 +0100 +@@ -32,6 +32,9 @@ + } + + . = ALIGN(4); ++ .u_boot_list : { ++ KEEP(*(SORT(.u_boot_list*_i2c_*))); ++ } + + . = .; + #ifdef CONFIG_SPL_DM +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/cros-ec-keyboard.dtsi u-boot/arch/arm/dts/cros-ec-keyboard.dtsi +--- u-boot-2015.01-rc3/arch/arm/dts/cros-ec-keyboard.dtsi 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/dts/cros-ec-keyboard.dtsi 2015-01-01 17:34:32.037506793 +0100 +@@ -0,0 +1,105 @@ ++/* ++ * Keyboard dts fragment for devices that use cros-ec-keyboard ++ * ++ * Copyright (c) 2014 Google, Inc ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++*/ ++ ++#include ++ ++&cros_ec { ++ keyboard-controller { ++ compatible = "google,cros-ec-keyb"; ++ keypad,num-rows = <8>; ++ keypad,num-columns = <13>; ++ google,needs-ghost-filter; ++ ++ linux,keymap = < ++ MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA) ++ MATRIX_KEY(0x00, 0x02, KEY_F1) ++ MATRIX_KEY(0x00, 0x03, KEY_B) ++ MATRIX_KEY(0x00, 0x04, KEY_F10) ++ MATRIX_KEY(0x00, 0x06, KEY_N) ++ MATRIX_KEY(0x00, 0x08, KEY_EQUAL) ++ MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT) ++ ++ MATRIX_KEY(0x01, 0x01, KEY_ESC) ++ MATRIX_KEY(0x01, 0x02, KEY_F4) ++ MATRIX_KEY(0x01, 0x03, KEY_G) ++ MATRIX_KEY(0x01, 0x04, KEY_F7) ++ MATRIX_KEY(0x01, 0x06, KEY_H) ++ MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) ++ MATRIX_KEY(0x01, 0x09, KEY_F9) ++ MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) ++ ++ MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) ++ MATRIX_KEY(0x02, 0x01, KEY_TAB) ++ MATRIX_KEY(0x02, 0x02, KEY_F3) ++ MATRIX_KEY(0x02, 0x03, KEY_T) ++ MATRIX_KEY(0x02, 0x04, KEY_F6) ++ MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE) ++ MATRIX_KEY(0x02, 0x06, KEY_Y) ++ MATRIX_KEY(0x02, 0x07, KEY_102ND) ++ MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) ++ MATRIX_KEY(0x02, 0x09, KEY_F8) ++ ++ MATRIX_KEY(0x03, 0x01, KEY_GRAVE) ++ MATRIX_KEY(0x03, 0x02, KEY_F2) ++ MATRIX_KEY(0x03, 0x03, KEY_5) ++ MATRIX_KEY(0x03, 0x04, KEY_F5) ++ MATRIX_KEY(0x03, 0x06, KEY_6) ++ MATRIX_KEY(0x03, 0x08, KEY_MINUS) ++ MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) ++ ++ MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) ++ MATRIX_KEY(0x04, 0x01, KEY_A) ++ MATRIX_KEY(0x04, 0x02, KEY_D) ++ MATRIX_KEY(0x04, 0x03, KEY_F) ++ MATRIX_KEY(0x04, 0x04, KEY_S) ++ MATRIX_KEY(0x04, 0x05, KEY_K) ++ MATRIX_KEY(0x04, 0x06, KEY_J) ++ MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON) ++ MATRIX_KEY(0x04, 0x09, KEY_L) ++ MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH) ++ MATRIX_KEY(0x04, 0x0b, KEY_ENTER) ++ ++ MATRIX_KEY(0x05, 0x01, KEY_Z) ++ MATRIX_KEY(0x05, 0x02, KEY_C) ++ MATRIX_KEY(0x05, 0x03, KEY_V) ++ MATRIX_KEY(0x05, 0x04, KEY_X) ++ MATRIX_KEY(0x05, 0x05, KEY_COMMA) ++ MATRIX_KEY(0x05, 0x06, KEY_M) ++ MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT) ++ MATRIX_KEY(0x05, 0x08, KEY_SLASH) ++ MATRIX_KEY(0x05, 0x09, KEY_DOT) ++ MATRIX_KEY(0x05, 0x0b, KEY_SPACE) ++ ++ MATRIX_KEY(0x06, 0x01, KEY_1) ++ MATRIX_KEY(0x06, 0x02, KEY_3) ++ MATRIX_KEY(0x06, 0x03, KEY_4) ++ MATRIX_KEY(0x06, 0x04, KEY_2) ++ MATRIX_KEY(0x06, 0x05, KEY_8) ++ MATRIX_KEY(0x06, 0x06, KEY_7) ++ MATRIX_KEY(0x06, 0x08, KEY_0) ++ MATRIX_KEY(0x06, 0x09, KEY_9) ++ MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT) ++ MATRIX_KEY(0x06, 0x0b, KEY_DOWN) ++ MATRIX_KEY(0x06, 0x0c, KEY_RIGHT) ++ ++ MATRIX_KEY(0x07, 0x01, KEY_Q) ++ MATRIX_KEY(0x07, 0x02, KEY_E) ++ MATRIX_KEY(0x07, 0x03, KEY_R) ++ MATRIX_KEY(0x07, 0x04, KEY_W) ++ MATRIX_KEY(0x07, 0x05, KEY_I) ++ MATRIX_KEY(0x07, 0x06, KEY_U) ++ MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT) ++ MATRIX_KEY(0x07, 0x08, KEY_P) ++ MATRIX_KEY(0x07, 0x09, KEY_O) ++ MATRIX_KEY(0x07, 0x0b, KEY_UP) ++ MATRIX_KEY(0x07, 0x0c, KEY_LEFT) ++ >; ++ }; ++}; +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/arch/arm/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/include/dt-bindings/reset/altr,rst-mgr.h u-boot/arch/arm/dts/include/dt-bindings/reset/altr,rst-mgr.h +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/Makefile u-boot/arch/arm/dts/Makefile +--- u-boot-2015.01-rc3/arch/arm/dts/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/dts/Makefile 2015-01-01 17:34:32.037506793 +0100 +@@ -31,6 +31,7 @@ + tegra30-tec-ng.dtb \ + tegra114-dalmore.dtb \ + tegra124-jetson-tk1.dtb \ ++ tegra124-nyan-big.dtb \ + tegra124-venice2.dtb + dtb-$(CONFIG_ARCH_UNIPHIER) += \ + uniphier-ph1-sld3-ref.dtb \ +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/socfpga_cyclone5.dtsi u-boot/arch/arm/dts/socfpga_cyclone5.dtsi +--- u-boot-2015.01-rc3/arch/arm/dts/socfpga_cyclone5.dtsi 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/dts/socfpga_cyclone5.dtsi 2015-01-01 17:34:32.041506727 +0100 +@@ -1,18 +1,7 @@ + /* + * Copyright (C) 2012 Altera Corporation + * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License as published by +- * the Free Software Foundation; either version 2 of the License, or +- * (at your option) any later version. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program. If not, see . ++ * SPDX-License-Identifier: GPL-2.0+ + */ + + /dts-v1/; +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/socfpga_cyclone5_socrates.dts u-boot/arch/arm/dts/socfpga_cyclone5_socrates.dts +--- u-boot-2015.01-rc3/arch/arm/dts/socfpga_cyclone5_socrates.dts 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/dts/socfpga_cyclone5_socrates.dts 2015-01-01 17:34:32.041506727 +0100 +@@ -1,18 +1,7 @@ + /* + * Copyright (C) 2014 Steffen Trumtrar + * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License as published by +- * the Free Software Foundation; either version 2 of the License, or +- * (at your option) any later version. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program. If not, see . ++ * SPDX-License-Identifier: GPL-2.0+ + */ + + #include "socfpga_cyclone5.dtsi" +@@ -25,6 +14,12 @@ + bootargs = "console=ttyS0,115200"; + }; + ++ aliases { ++ spi0 = "/spi@ff705000"; /* QSPI */ ++ spi1 = "/spi@fff00000"; ++ spi2 = "/spi@fff01000"; ++ }; ++ + memory { + name = "memory"; + device_type = "memory"; +@@ -48,3 +43,23 @@ + &mmc { + status = "okay"; + }; ++ ++&qspi { ++ status = "okay"; ++ ++ flash0: n25q00@0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "n25q00"; ++ reg = <0>; /* chip select */ ++ spi-max-frequency = <50000000>; ++ m25p,fast-read; ++ page-size = <256>; ++ block-size = <16>; /* 2^16, 64KB */ ++ read-delay = <4>; /* delay value in read data capture register */ ++ tshsl-ns = <50>; ++ tsd2d-ns = <50>; ++ tchsh-ns = <4>; ++ tslch-ns = <4>; ++ }; ++}; +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/socfpga.dtsi u-boot/arch/arm/dts/socfpga.dtsi +--- u-boot-2015.01-rc3/arch/arm/dts/socfpga.dtsi 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/dts/socfpga.dtsi 2015-01-01 17:34:32.041506727 +0100 +@@ -1,18 +1,7 @@ + /* + * Copyright (C) 2012 Altera + * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License as published by +- * the Free Software Foundation; either version 2 of the License, or +- * (at your option) any later version. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program. If not, see . ++ * SPDX-License-Identifier: GPL-2.0+ + */ + + #include "skeleton.dtsi" +@@ -639,6 +628,49 @@ + clock-names = "biu", "ciu"; + }; + ++ qspi: spi@ff705000 { ++ compatible = "cadence,qspi"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0xff705000 0x1000>, ++ <0xffa00000 0x1000>; ++ interrupts = <0 151 4>; ++ clocks = <&qspi_clk>; ++ ext-decoder = <0>; /* external decoder */ ++ num-chipselect = <4>; ++ fifo-depth = <128>; ++ bus-num = <2>; ++ status = "disabled"; ++ }; ++ ++ spi0: spi@fff00000 { ++ compatible = "snps,dw-spi-mmio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0xfff00000 0x1000>; ++ interrupts = <0 154 4>; ++ num-chipselect = <4>; ++ bus-num = <0>; ++ tx-dma-channel = <&pdma 16>; ++ rx-dma-channel = <&pdma 17>; ++ clocks = <&per_base_clk>; ++ status = "disabled"; ++ }; ++ ++ spi1: spi@fff01000 { ++ compatible = "snps,dw-spi-mmio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0xfff01000 0x1000>; ++ interrupts = <0 156 4>; ++ num-chipselect = <4>; ++ bus-num = <1>; ++ tx-dma-channel = <&pdma 20>; ++ rx-dma-channel = <&pdma 21>; ++ clocks = <&per_base_clk>; ++ status = "disabled"; ++ }; ++ + /* Local timer */ + timer@fffec600 { + compatible = "arm,cortex-a9-twd-timer"; +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/tegra124.dtsi u-boot/arch/arm/dts/tegra124.dtsi +--- u-boot-2015.01-rc3/arch/arm/dts/tegra124.dtsi 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/dts/tegra124.dtsi 2015-01-01 17:34:32.041506727 +0100 +@@ -1,5 +1,6 @@ + #include + #include ++#include + #include + + #include "skeleton.dtsi" +@@ -192,6 +193,16 @@ + status = "disabled"; + }; + ++ pwm: pwm@7000a000 { ++ compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; ++ reg = <0x7000a000 0x100>; ++ #pwm-cells = <2>; ++ clocks = <&tegra_car TEGRA124_CLK_PWM>; ++ resets = <&tegra_car 17>; ++ reset-names = "pwm"; ++ status = "disabled"; ++ }; ++ + spi@7000d400 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000d400 0x200>; +@@ -290,6 +301,109 @@ + status = "disabled"; + }; + ++ ahub@70300000 { ++ compatible = "nvidia,tegra124-ahub"; ++ reg = <0x70300000 0x200>, ++ <0x70300800 0x800>, ++ <0x70300200 0x600>; ++ interrupts = ; ++ clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>, ++ <&tegra_car TEGRA124_CLK_APBIF>; ++ clock-names = "d_audio", "apbif"; ++ resets = <&tegra_car 106>, /* d_audio */ ++ <&tegra_car 107>, /* apbif */ ++ <&tegra_car 30>, /* i2s0 */ ++ <&tegra_car 11>, /* i2s1 */ ++ <&tegra_car 18>, /* i2s2 */ ++ <&tegra_car 101>, /* i2s3 */ ++ <&tegra_car 102>, /* i2s4 */ ++ <&tegra_car 108>, /* dam0 */ ++ <&tegra_car 109>, /* dam1 */ ++ <&tegra_car 110>, /* dam2 */ ++ <&tegra_car 10>, /* spdif */ ++ <&tegra_car 153>, /* amx */ ++ <&tegra_car 185>, /* amx1 */ ++ <&tegra_car 154>, /* adx */ ++ <&tegra_car 180>, /* adx1 */ ++ <&tegra_car 186>, /* afc0 */ ++ <&tegra_car 187>, /* afc1 */ ++ <&tegra_car 188>, /* afc2 */ ++ <&tegra_car 189>, /* afc3 */ ++ <&tegra_car 190>, /* afc4 */ ++ <&tegra_car 191>; /* afc5 */ ++ reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", ++ "i2s3", "i2s4", "dam0", "dam1", "dam2", ++ "spdif", "amx", "amx1", "adx", "adx1", ++ "afc0", "afc1", "afc2", "afc3", "afc4", "afc5"; ++ dmas = <&apbdma 1>, <&apbdma 1>, ++ <&apbdma 2>, <&apbdma 2>, ++ <&apbdma 3>, <&apbdma 3>, ++ <&apbdma 4>, <&apbdma 4>, ++ <&apbdma 6>, <&apbdma 6>, ++ <&apbdma 7>, <&apbdma 7>, ++ <&apbdma 12>, <&apbdma 12>, ++ <&apbdma 13>, <&apbdma 13>, ++ <&apbdma 14>, <&apbdma 14>, ++ <&apbdma 29>, <&apbdma 29>; ++ dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", ++ "rx3", "tx3", "rx4", "tx4", "rx5", "tx5", ++ "rx6", "tx6", "rx7", "tx7", "rx8", "tx8", ++ "rx9", "tx9"; ++ ranges; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ tegra_i2s0: i2s@70301000 { ++ compatible = "nvidia,tegra124-i2s"; ++ reg = <0x70301000 0x100>; ++ nvidia,ahub-cif-ids = <4 4>; ++ clocks = <&tegra_car TEGRA124_CLK_I2S0>; ++ resets = <&tegra_car 30>; ++ reset-names = "i2s"; ++ status = "disabled"; ++ }; ++ ++ tegra_i2s1: i2s@70301100 { ++ compatible = "nvidia,tegra124-i2s"; ++ reg = <0x70301100 0x100>; ++ nvidia,ahub-cif-ids = <5 5>; ++ clocks = <&tegra_car TEGRA124_CLK_I2S1>; ++ resets = <&tegra_car 11>; ++ reset-names = "i2s"; ++ status = "disabled"; ++ }; ++ ++ tegra_i2s2: i2s@70301200 { ++ compatible = "nvidia,tegra124-i2s"; ++ reg = <0x70301200 0x100>; ++ nvidia,ahub-cif-ids = <6 6>; ++ clocks = <&tegra_car TEGRA124_CLK_I2S2>; ++ resets = <&tegra_car 18>; ++ reset-names = "i2s"; ++ status = "disabled"; ++ }; ++ ++ tegra_i2s3: i2s@70301300 { ++ compatible = "nvidia,tegra124-i2s"; ++ reg = <0x70301300 0x100>; ++ nvidia,ahub-cif-ids = <7 7>; ++ clocks = <&tegra_car TEGRA124_CLK_I2S3>; ++ resets = <&tegra_car 101>; ++ reset-names = "i2s"; ++ status = "disabled"; ++ }; ++ ++ tegra_i2s4: i2s@70301400 { ++ compatible = "nvidia,tegra124-i2s"; ++ reg = <0x70301400 0x100>; ++ nvidia,ahub-cif-ids = <8 8>; ++ clocks = <&tegra_car TEGRA124_CLK_I2S4>; ++ resets = <&tegra_car 102>; ++ reset-names = "i2s"; ++ status = "disabled"; ++ }; ++ }; ++ + usb@7d000000 { + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; + reg = <0x7d000000 0x4000>; +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/tegra124-jetson-tk1.dts u-boot/arch/arm/dts/tegra124-jetson-tk1.dts +--- u-boot-2015.01-rc3/arch/arm/dts/tegra124-jetson-tk1.dts 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/dts/tegra124-jetson-tk1.dts 2015-01-01 17:34:32.041506727 +0100 +@@ -16,7 +16,6 @@ + i2c2 = "/i2c@7000c400"; + i2c3 = "/i2c@7000c500"; + i2c4 = "/i2c@7000c700"; +- i2c5 = "/i2c@7000d100"; + sdhci0 = "/sdhci@700b0600"; + sdhci1 = "/sdhci@700b0400"; + spi0 = "/spi@7000d400"; +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/tegra124-nyan-big.dts u-boot/arch/arm/dts/tegra124-nyan-big.dts +--- u-boot-2015.01-rc3/arch/arm/dts/tegra124-nyan-big.dts 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/dts/tegra124-nyan-big.dts 2015-01-01 17:34:32.041506727 +0100 +@@ -0,0 +1,365 @@ ++/dts-v1/; ++ ++#include ++#include "tegra124.dtsi" ++ ++/ { ++ model = "Acer Chromebook 13 CB5-311"; ++ compatible = "google,nyan-big", "nvidia,tegra124"; ++ ++ aliases { ++ console = &uarta; ++ i2c0 = "/i2c@7000d000"; ++ i2c1 = "/i2c@7000c000"; ++ i2c2 = "/i2c@7000c400"; ++ i2c3 = "/i2c@7000c500"; ++ i2c4 = "/i2c@7000c700"; ++ i2c5 = "/i2c@7000d100"; ++ rtc0 = "/i2c@0,7000d000/pmic@40"; ++ rtc1 = "/rtc@0,7000e000"; ++ sdhci0 = "/sdhci@700b0600"; ++ sdhci1 = "/sdhci@700b0400"; ++ spi0 = "/spi@7000d400"; ++ spi1 = "/spi@7000da00"; ++ usb0 = "/usb@7d000000"; ++ usb1 = "/usb@7d008000"; ++ }; ++ ++ memory { ++ reg = <0x80000000 0x80000000>; ++ }; ++ ++ serial@70006000 { ++ /* Debug connector on the bottom of the board near SD card. */ ++ status = "okay"; ++ }; ++ ++ pwm@7000a000 { ++ status = "okay"; ++ }; ++ ++ i2c@7000c000 { ++ status = "okay"; ++ clock-frequency = <100000>; ++ ++ acodec: audio-codec@10 { ++ compatible = "maxim,max98090"; ++ reg = <0x10>; ++ interrupt-parent = <&gpio>; ++ interrupts = ; ++ }; ++ ++ temperature-sensor@4c { ++ compatible = "ti,tmp451"; ++ reg = <0x4c>; ++ interrupt-parent = <&gpio>; ++ interrupts = ; ++ ++ #thermal-sensor-cells = <1>; ++ }; ++ }; ++ ++ i2c@7000c400 { ++ status = "okay"; ++ clock-frequency = <100000>; ++ }; ++ ++ i2c@7000c500 { ++ status = "okay"; ++ clock-frequency = <400000>; ++ ++ tpm@20 { ++ compatible = "infineon,slb9645tt"; ++ reg = <0x20>; ++ }; ++ }; ++ ++ hdmi_ddc: i2c@7000c700 { ++ status = "okay"; ++ clock-frequency = <100000>; ++ }; ++ ++ i2c@7000d000 { ++ status = "okay"; ++ clock-frequency = <400000>; ++ ++ pmic: pmic@40 { ++ compatible = "ams,as3722"; ++ reg = <0x40>; ++ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; ++ ++ ams,system-power-controller; ++ ++ #interrupt-cells = <2>; ++ interrupt-controller; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&as3722_default>; ++ ++ as3722_default: pinmux { ++ gpio0 { ++ pins = "gpio0"; ++ function = "gpio"; ++ bias-pull-down; ++ }; ++ ++ gpio1 { ++ pins = "gpio1"; ++ function = "gpio"; ++ bias-pull-up; ++ }; ++ ++ gpio2_4_7 { ++ pins = "gpio2", "gpio4", "gpio7"; ++ function = "gpio"; ++ bias-pull-up; ++ }; ++ ++ gpio3_6 { ++ pins = "gpio3", "gpio6"; ++ bias-high-impedance; ++ }; ++ ++ gpio5 { ++ pins = "gpio5"; ++ function = "clk32k-out"; ++ bias-pull-down; ++ }; ++ }; ++ }; ++ }; ++ ++ spi@7000d400 { ++ status = "okay"; ++ ++ cros_ec: cros-ec@0 { ++ compatible = "google,cros-ec-spi"; ++ spi-max-frequency = <3000000>; ++ interrupt-parent = <&gpio>; ++ interrupts = ; ++ reg = <0>; ++ ++ google,cros-ec-spi-msg-delay = <2000>; ++ ++ i2c-tunnel { ++ compatible = "google,cros-ec-i2c-tunnel"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ google,remote-bus = <0>; ++ ++ charger: bq24735@9 { ++ compatible = "ti,bq24735"; ++ reg = <0x9>; ++ interrupt-parent = <&gpio>; ++ interrupts = ; ++ ti,ac-detect-gpios = <&gpio ++ TEGRA_GPIO(J, 0) ++ GPIO_ACTIVE_HIGH>; ++ }; ++ ++ battery: sbs-battery@b { ++ compatible = "sbs,sbs-battery"; ++ reg = <0xb>; ++ sbs,i2c-retry-count = <2>; ++ sbs,poll-retry-count = <10>; ++ power-supplies = <&charger>; ++ }; ++ }; ++ }; ++ }; ++ ++ spi@7000da00 { ++ status = "okay"; ++ spi-max-frequency = <25000000>; ++ ++ flash@0 { ++ compatible = "winbond,w25q32dw"; ++ reg = <0>; ++ }; ++ }; ++ ++ pmc@7000e400 { ++ nvidia,invert-interrupt; ++ nvidia,suspend-mode = <0>; ++ nvidia,cpu-pwr-good-time = <500>; ++ nvidia,cpu-pwr-off-time = <300>; ++ nvidia,core-pwr-good-time = <641 3845>; ++ nvidia,core-pwr-off-time = <61036>; ++ nvidia,core-power-req-active-high; ++ nvidia,sys-clock-req-active-high; ++ }; ++ ++ hda@70030000 { ++ status = "okay"; ++ }; ++ ++ sdhci@700b0000 { /* WiFi/BT on this bus */ ++ status = "okay"; ++ power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>; ++ bus-width = <4>; ++ no-1-8-v; ++ non-removable; ++ }; ++ ++ sdhci@700b0400 { /* SD Card on this bus */ ++ status = "okay"; ++ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; ++ power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; ++ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; ++ bus-width = <4>; ++ no-1-8-v; ++ }; ++ ++ sdhci@700b0600 { /* eMMC on this bus */ ++ status = "okay"; ++ bus-width = <8>; ++ no-1-8-v; ++ non-removable; ++ }; ++ ++ ahub@70300000 { ++ i2s@70301100 { ++ status = "okay"; ++ }; ++ }; ++ ++ usb@7d000000 { /* Rear external USB port. */ ++ status = "okay"; ++ }; ++ ++ usb-phy@7d000000 { ++ status = "okay"; ++ }; ++ ++ usb@7d004000 { /* Internal webcam. */ ++ status = "okay"; ++ }; ++ ++ usb-phy@7d004000 { ++ status = "okay"; ++ }; ++ ++ usb@7d008000 { /* Left external USB port. */ ++ status = "okay"; ++ }; ++ ++ usb-phy@7d008000 { ++ status = "okay"; ++ }; ++ ++ backlight: backlight { ++ compatible = "pwm-backlight"; ++ ++ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; ++ pwms = <&pwm 1 1000000>; ++ ++ default-brightness-level = <224>; ++ brightness-levels = ++ < 0 1 2 3 4 5 6 7 ++ 8 9 10 11 12 13 14 15 ++ 16 17 18 19 20 21 22 23 ++ 24 25 26 27 28 29 30 31 ++ 32 33 34 35 36 37 38 39 ++ 40 41 42 43 44 45 46 47 ++ 48 49 50 51 52 53 54 55 ++ 56 57 58 59 60 61 62 63 ++ 64 65 66 67 68 69 70 71 ++ 72 73 74 75 76 77 78 79 ++ 80 81 82 83 84 85 86 87 ++ 88 89 90 91 92 93 94 95 ++ 96 97 98 99 100 101 102 103 ++ 104 105 106 107 108 109 110 111 ++ 112 113 114 115 116 117 118 119 ++ 120 121 122 123 124 125 126 127 ++ 128 129 130 131 132 133 134 135 ++ 136 137 138 139 140 141 142 143 ++ 144 145 146 147 148 149 150 151 ++ 152 153 154 155 156 157 158 159 ++ 160 161 162 163 164 165 166 167 ++ 168 169 170 171 172 173 174 175 ++ 176 177 178 179 180 181 182 183 ++ 184 185 186 187 188 189 190 191 ++ 192 193 194 195 196 197 198 199 ++ 200 201 202 203 204 205 206 207 ++ 208 209 210 211 212 213 214 215 ++ 216 217 218 219 220 221 222 223 ++ 224 225 226 227 228 229 230 231 ++ 232 233 234 235 236 237 238 239 ++ 240 241 242 243 244 245 246 247 ++ 248 249 250 251 252 253 254 255 ++ 256>; ++ }; ++ ++ clocks { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ clk32k_in: clock@0 { ++ compatible = "fixed-clock"; ++ reg = <0>; ++ #clock-cells = <0>; ++ clock-frequency = <32768>; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ ++ lid { ++ label = "Lid"; ++ gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; ++ linux,input-type = <5>; ++ linux,code = ; ++ debounce-interval = <1>; ++ gpio-key,wakeup; ++ }; ++ ++ power { ++ label = "Power"; ++ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; ++ linux,code = ; ++ debounce-interval = <30>; ++ gpio-key,wakeup; ++ }; ++ }; ++ ++ panel: panel { ++ compatible = "auo,b133xtn01"; ++ ++ backlight = <&backlight>; ++ }; ++ ++ sound { ++ compatible = "nvidia,tegra-audio-max98090-nyan-big", ++ "nvidia,tegra-audio-max98090"; ++ nvidia,model = "Acer Chromebook 13"; ++ ++ nvidia,audio-routing = ++ "Headphones", "HPR", ++ "Headphones", "HPL", ++ "Speakers", "SPKR", ++ "Speakers", "SPKL", ++ "Mic Jack", "MICBIAS", ++ "DMICL", "Int Mic", ++ "DMICR", "Int Mic", ++ "IN34", "Mic Jack"; ++ ++ nvidia,i2s-controller = <&tegra_i2s1>; ++ nvidia,audio-codec = <&acodec>; ++ ++ clocks = <&tegra_car TEGRA124_CLK_PLL_A>, ++ <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, ++ <&tegra_car TEGRA124_CLK_EXTERN1>; ++ clock-names = "pll_a", "pll_a_out0", "mclk"; ++ ++ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; ++ }; ++}; ++ ++#include "cros-ec-keyboard.dtsi" +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/tegra30-tec-ng.dts u-boot/arch/arm/dts/tegra30-tec-ng.dts +--- u-boot-2015.01-rc3/arch/arm/dts/tegra30-tec-ng.dts 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/dts/tegra30-tec-ng.dts 2015-01-01 17:34:32.045506662 +0100 +@@ -6,6 +6,10 @@ + model = "Avionic Design Tamonten™ NG Evaluation Carrier"; + compatible = "ad,tec-ng", "nvidia,tegra30"; + ++ aliases { ++ i2c0 = "/i2c@7000c400"; ++ }; ++ + /* GEN2 */ + i2c@7000c400 { + status = "okay"; +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-ld4-ref.dts u-boot/arch/arm/dts/uniphier-ph1-ld4-ref.dts +--- u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-ld4-ref.dts 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/dts/uniphier-ph1-ld4-ref.dts 2015-01-01 17:34:32.045506662 +0100 +@@ -25,10 +25,10 @@ + }; + + aliases { +- uart0 = &uart0; +- uart1 = &uart1; +- uart2 = &uart2; +- uart3 = &uart3; ++ serial0 = &uart0; ++ serial1 = &uart1; ++ serial2 = &uart2; ++ serial3 = &uart3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-pro4-ref.dts u-boot/arch/arm/dts/uniphier-ph1-pro4-ref.dts +--- u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-pro4-ref.dts 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/dts/uniphier-ph1-pro4-ref.dts 2015-01-01 17:34:32.045506662 +0100 +@@ -25,10 +25,10 @@ + }; + + aliases { +- uart0 = &uart0; +- uart1 = &uart1; +- uart2 = &uart2; +- uart3 = &uart3; ++ serial0 = &uart0; ++ serial1 = &uart1; ++ serial2 = &uart2; ++ serial3 = &uart3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-sld3-ref.dts u-boot/arch/arm/dts/uniphier-ph1-sld3-ref.dts +--- u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-sld3-ref.dts 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/dts/uniphier-ph1-sld3-ref.dts 2015-01-01 17:34:32.045506662 +0100 +@@ -25,9 +25,9 @@ + }; + + aliases { +- uart0 = &uart0; +- uart1 = &uart1; +- uart2 = &uart2; ++ serial0 = &uart0; ++ serial1 = &uart1; ++ serial2 = &uart2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; +diff -ruN u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-sld8-ref.dts u-boot/arch/arm/dts/uniphier-ph1-sld8-ref.dts +--- u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-sld8-ref.dts 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/dts/uniphier-ph1-sld8-ref.dts 2015-01-01 17:34:32.045506662 +0100 +@@ -25,10 +25,10 @@ + }; + + aliases { +- uart0 = &uart0; +- uart1 = &uart1; +- uart2 = &uart2; +- uart3 = &uart3; ++ serial0 = &uart0; ++ serial1 = &uart1; ++ serial2 = &uart2; ++ serial3 = &uart3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; +diff -ruN u-boot-2015.01-rc3/arch/arm/imx-common/cpu.c u-boot/arch/arm/imx-common/cpu.c +--- u-boot-2015.01-rc3/arch/arm/imx-common/cpu.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/imx-common/cpu.c 2015-01-01 17:34:32.045506662 +0100 +@@ -206,6 +206,9 @@ + { + #if defined(CONFIG_CMD_SATA) + sata_stop(); ++#if defined(CONFIG_MX6) ++ disable_sata_clock(); ++#endif + #endif + #if defined(CONFIG_VIDEO_IPUV3) + /* disable video before launching O/S */ +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-bcm281xx/sysmap.h u-boot/arch/arm/include/asm/arch-bcm281xx/sysmap.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-bcm281xx/sysmap.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-bcm281xx/sysmap.h 2015-01-01 17:34:32.053506531 +0100 +@@ -13,6 +13,8 @@ + #define ESUB_CLK_BASE_ADDR 0x38000000 + #define ESW_CONTRL_BASE_ADDR 0x38200000 + #define GPIO2_BASE_ADDR 0x35003000 ++#define HSOTG_BASE_ADDR 0x3f120000 ++#define HSOTG_CTRL_BASE_ADDR 0x3f130000 + #define KONA_MST_CLK_BASE_ADDR 0x3f001000 + #define KONA_SLV_CLK_BASE_ADDR 0x3e011000 + #define PMU_BSC_BASE_ADDR 0x3500d000 +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-bcm2835/mbox.h u-boot/arch/arm/include/asm/arch-bcm2835/mbox.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-bcm2835/mbox.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-bcm2835/mbox.h 2015-01-01 17:34:32.053506531 +0100 +@@ -140,6 +140,7 @@ + #define BCM2835_BOARD_REV_B_REV2_f 0xf + #define BCM2835_BOARD_REV_B_PLUS 0x10 + #define BCM2835_BOARD_REV_CM 0x11 ++#define BCM2835_BOARD_REV_A_PLUS 0x12 + + struct bcm2835_mbox_tag_get_board_rev { + struct bcm2835_mbox_tag_hdr tag_hdr; +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/config.h u-boot/arch/arm/include/asm/arch-ls102xa/config.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/config.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-ls102xa/config.h 2015-01-01 17:34:32.065506333 +0100 +@@ -11,11 +11,17 @@ + + #define OCRAM_BASE_ADDR 0x10000000 + #define OCRAM_SIZE 0x00020000 ++#define OCRAM_BASE_S_ADDR 0x10010000 ++#define OCRAM_S_SIZE 0x00010000 + + #define CONFIG_SYS_IMMR 0x01000000 ++#define CONFIG_SYS_DCSRBAR 0x20000000 ++ ++#define CONFIG_SYS_DCSR_DCFG_ADDR (CONFIG_SYS_DCSRBAR + 0x00220000) + + #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) + #define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000) ++#define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000) + #define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000) + #define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000) + #define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000) +@@ -52,6 +58,9 @@ + + #define LPUART_BASE (CONFIG_SYS_IMMR + 0x01950000) + ++#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000) ++#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000) ++ + #ifdef CONFIG_DDR_SPD + #define CONFIG_SYS_FSL_DDR_BE + #define CONFIG_VERY_BIG_RAM +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h u-boot/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h 2015-01-01 17:34:32.065506333 +0100 +@@ -17,6 +17,9 @@ + #define SOC_VER_LS1021 0x11 + #define SOC_VER_LS1022 0x12 + ++#define CCSR_BRR_OFFSET 0xe4 ++#define CCSR_SCRATCHRW1_OFFSET 0x200 ++ + #define RCWSR0_SYS_PLL_RAT_SHIFT 25 + #define RCWSR0_SYS_PLL_RAT_MASK 0x1f + #define RCWSR0_MEM_PLL_RAT_SHIFT 16 +@@ -29,6 +32,11 @@ + #define ARCH_TIMER_CTRL_ENABLE (1 << 0) + #define SYS_COUNTER_CTRL_ENABLE (1 << 24) + ++#define DCFG_CCSR_PORSR1_RCW_MASK 0xff800000 ++#define DCFG_CCSR_PORSR1_RCW_SRC_I2C 0x24800000 ++ ++#define DCFG_DCSR_PORCR1 0 ++ + struct sys_info { + unsigned long freq_processor[CONFIG_MAX_CPUS]; + unsigned long freq_systembus; +@@ -98,6 +106,7 @@ + #define SCFG_ETSECDMAMCR_LE_BD_FR 0xf8001a0f + #define SCFG_ETSECCMCR_GE2_CLK125 0x04000000 + #define SCFG_PIXCLKCR_PXCKEN 0x80000000 ++#define SCFG_QSPI_CLKSEL 0xc0100000 + + /* Supplemental Configuration Unit */ + struct ccsr_scfg { +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h 2015-01-01 17:34:32.065506333 +0100 +@@ -0,0 +1,17 @@ ++/* ++ * Copyright 2014 Freescale Semiconductor, Inc. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __FSL_LS102XA_STREAM_ID_H_ ++#define __FSL_LS102XA_STREAM_ID_H_ ++ ++struct smmu_stream_id { ++ uint16_t offset; ++ uint16_t stream_id; ++ char dev_name[32]; ++}; ++ ++void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num); ++#endif +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/ns_access.h u-boot/arch/arm/include/asm/arch-ls102xa/ns_access.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/ns_access.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-ls102xa/ns_access.h 2015-01-01 17:34:32.065506333 +0100 +@@ -0,0 +1,118 @@ ++/* ++ * Copyright 2014 Freescale Semiconductor, Inc. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __FSL_NS_ACCESS_H_ ++#define __FSL_NS_ACCESS_H_ ++ ++enum csu_cslx_access { ++ CSU_NS_SUP_R = 0x08, ++ CSU_NS_SUP_W = 0x80, ++ CSU_NS_SUP_RW = 0x88, ++ CSU_NS_USER_R = 0x04, ++ CSU_NS_USER_W = 0x40, ++ CSU_NS_USER_RW = 0x44, ++ CSU_S_SUP_R = 0x02, ++ CSU_S_SUP_W = 0x20, ++ CSU_S_SUP_RW = 0x22, ++ CSU_S_USER_R = 0x01, ++ CSU_S_USER_W = 0x10, ++ CSU_S_USER_RW = 0x11, ++ CSU_ALL_RW = 0xff, ++}; ++ ++enum csu_cslx_ind { ++ CSU_CSLX_PCIE2_IO = 0, ++ CSU_CSLX_PCIE1_IO, ++ CSU_CSLX_MG2TPR_IP, ++ CSU_CSLX_IFC_MEM, ++ CSU_CSLX_OCRAM, ++ CSU_CSLX_GIC, ++ CSU_CSLX_PCIE1, ++ CSU_CSLX_OCRAM2, ++ CSU_CSLX_QSPI_MEM, ++ CSU_CSLX_PCIE2, ++ CSU_CSLX_SATA, ++ CSU_CSLX_USB3, ++ CSU_CSLX_SERDES = 32, ++ CSU_CSLX_QDMA, ++ CSU_CSLX_LPUART2, ++ CSU_CSLX_LPUART1, ++ CSU_CSLX_LPUART4, ++ CSU_CSLX_LPUART3, ++ CSU_CSLX_LPUART6, ++ CSU_CSLX_LPUART5, ++ CSU_CSLX_DSPI2 = 40, ++ CSU_CSLX_DSPI1, ++ CSU_CSLX_QSPI, ++ CSU_CSLX_ESDHC, ++ CSU_CSLX_2D_ACE, ++ CSU_CSLX_IFC, ++ CSU_CSLX_I2C1, ++ CSU_CSLX_USB2, ++ CSU_CSLX_I2C3, ++ CSU_CSLX_I2C2, ++ CSU_CSLX_DUART2 = 50, ++ CSU_CSLX_DUART1, ++ CSU_CSLX_WDT2, ++ CSU_CSLX_WDT1, ++ CSU_CSLX_EDMA, ++ CSU_CSLX_SYS_CNT, ++ CSU_CSLX_DMA_MUX2, ++ CSU_CSLX_DMA_MUX1, ++ CSU_CSLX_DDR, ++ CSU_CSLX_QUICC, ++ CSU_CSLX_DCFG_CCU_RCPM = 60, ++ CSU_CSLX_SECURE_BOOTROM, ++ CSU_CSLX_SFP, ++ CSU_CSLX_TMU, ++ CSU_CSLX_SECURE_MONITOR, ++ CSU_CSLX_RESERVED0, ++ CSU_CSLX_ETSEC1, ++ CSU_CSLX_SEC5_5, ++ CSU_CSLX_ETSEC3, ++ CSU_CSLX_ETSEC2, ++ CSU_CSLX_GPIO2 = 70, ++ CSU_CSLX_GPIO1, ++ CSU_CSLX_GPIO4, ++ CSU_CSLX_GPIO3, ++ CSU_CSLX_PLATFORM_CONT, ++ CSU_CSLX_CSU, ++ CSU_CSLX_ASRC, ++ CSU_CSLX_SPDIF, ++ CSU_CSLX_FLEXCAN2, ++ CSU_CSLX_FLEXCAN1, ++ CSU_CSLX_FLEXCAN4 = 80, ++ CSU_CSLX_FLEXCAN3, ++ CSU_CSLX_SAI2, ++ CSU_CSLX_SAI1, ++ CSU_CSLX_SAI4, ++ CSU_CSLX_SAI3, ++ CSU_CSLX_FTM2, ++ CSU_CSLX_FTM1, ++ CSU_CSLX_FTM4, ++ CSU_CSLX_FTM3, ++ CSU_CSLX_FTM6 = 90, ++ CSU_CSLX_FTM5, ++ CSU_CSLX_FTM8, ++ CSU_CSLX_FTM7, ++ CSU_CSLX_COP_DCSR, ++ CSU_CSLX_EPU, ++ CSU_CSLX_GDI, ++ CSU_CSLX_DDI, ++ CSU_CSLX_RESERVED1, ++ CSU_CSLX_USB3_PHY = 117, ++ CSU_CSLX_RESERVED2, ++ CSU_CSLX_MAX, ++}; ++ ++struct csu_ns_dev { ++ unsigned long ind; ++ uint32_t val; ++}; ++ ++void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num); ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/spl.h u-boot/arch/arm/include/asm/arch-ls102xa/spl.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/spl.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-ls102xa/spl.h 2015-01-01 17:34:32.065506333 +0100 +@@ -0,0 +1,20 @@ ++/* ++ * Copyright 2014 Freescale Semiconductor, Inc. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __ASM_ARCH_SPL_H__ ++#define __ASM_ARCH_SPL_H__ ++ ++#define BOOT_DEVICE_NONE 0 ++#define BOOT_DEVICE_XIP 1 ++#define BOOT_DEVICE_XIPWAIT 2 ++#define BOOT_DEVICE_NAND 3 ++#define BOOT_DEVICE_ONENAND 4 ++#define BOOT_DEVICE_MMC1 5 ++#define BOOT_DEVICE_MMC2 6 ++#define BOOT_DEVICE_MMC2_2 7 ++#define BOOT_DEVICE_SPI 10 ++ ++#endif /* __ASM_ARCH_SPL_H__ */ +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-mx6/clock.h u-boot/arch/arm/include/asm/arch-mx6/clock.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-mx6/clock.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-mx6/clock.h 2015-01-01 17:34:32.073506203 +0100 +@@ -43,10 +43,10 @@ + }; + + enum enet_freq { +- ENET_25MHz, +- ENET_50MHz, +- ENET_100MHz, +- ENET_125MHz, ++ ENET_25MHZ, ++ ENET_50MHZ, ++ ENET_100MHZ, ++ ENET_125MHZ, + }; + + u32 imx_get_uartclk(void); +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-mx6/mx6sl_pins.h u-boot/arch/arm/include/asm/arch-mx6/mx6sl_pins.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-mx6/mx6sl_pins.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-mx6/mx6sl_pins.h 2015-01-01 17:34:32.073506203 +0100 +@@ -53,5 +53,10 @@ + MX6_PAD_FEC_REF_CLK__FEC_REF_OUT = IOMUX_PAD(0x424, 0x134, 0x10, 0x000, 0, 0), + MX6_PAD_FEC_RX_ER__GPIO_4_19 = IOMUX_PAD(0x0428, 0x0138, 5, 0x0000, 0, 0), + MX6_PAD_FEC_TX_CLK__GPIO_4_21 = IOMUX_PAD(0x0434, 0x0144, 5, 0x0000, 0, 0), ++ ++ MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID = IOMUX_PAD(0x03D0, 0x00E0, 4, 0x05DC, 0, 0), ++ ++ MX6_PAD_KEY_COL4__USB_USBOTG1_PWR = IOMUX_PAD(0x0484, 0x017C, 6, 0x0000, 0, 0), ++ MX6_PAD_KEY_COL5__USB_USBOTG2_PWR = IOMUX_PAD(0x0488, 0x0180, 6, 0x0000, 0, 0), + }; + #endif /* __ASM_ARCH_MX6_MX6SL_PINS_H__ */ +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/mmc.h u-boot/arch/arm/include/asm/arch-rmobile/mmc.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/mmc.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-rmobile/mmc.h 2015-01-01 17:34:32.085506005 +0100 +@@ -0,0 +1,14 @@ ++/* ++ * Renesas SuperH MMCIF driver. ++ * ++ * Copyright (C) 2014 Nobuhiro Iwamatsu ++ * Copyright (C) 2014 Renesas Electronics Corporation ++ * ++ * SPDX-License-Identifier: GPL-2.0 ++ */ ++#ifndef _RMOBILE_MMC_H_ ++#define _RMOBILE_MMC_H_ ++ ++int mmcif_mmc_init(void); ++ ++#endif /* _RMOBILE_MMC_H_ */ +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7790.h u-boot/arch/arm/include/asm/arch-rmobile/r8a7790.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7790.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-rmobile/r8a7790.h 2015-01-01 17:34:32.085506005 +0100 +@@ -15,6 +15,19 @@ + #define CONFIG_SYS_I2C_SH_BASE2 0xE6520000 + #define CONFIG_SYS_I2C_SH_BASE3 0xE60B0000 + ++/* Module stop control/status register bits */ ++#define MSTP0_BITS 0x00640801 ++#define MSTP1_BITS 0xDB6E9BDF ++#define MSTP2_BITS 0x300DA1FC ++#define MSTP3_BITS 0xF08CF831 ++#define MSTP4_BITS 0x80000184 ++#define MSTP5_BITS 0x44C00046 ++#define MSTP7_BITS 0x07F30718 ++#define MSTP8_BITS 0x01F0FF84 ++#define MSTP9_BITS 0xF5979FCF ++#define MSTP10_BITS 0xFFFEFFE0 ++#define MSTP11_BITS 0x00000000 ++ + #define R8A7790_CUT_ES2X 2 + #define IS_R8A7790_ES2() \ + (rmobile_get_cpu_rev_integer() == R8A7790_CUT_ES2X) +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7791.h u-boot/arch/arm/include/asm/arch-rmobile/r8a7791.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7791.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-rmobile/r8a7791.h 2015-01-01 17:34:32.089505941 +0100 +@@ -51,6 +51,19 @@ + #define DBSC3_1_QOS_W15_BASE 0xE67A2F00 + #define DBSC3_1_DBADJ2 0xE67A00C8 + ++/* Module stop control/status register bits */ ++#define MSTP0_BITS 0x00640801 ++#define MSTP1_BITS 0x9B6C9B5A ++#define MSTP2_BITS 0x100D21FC ++#define MSTP3_BITS 0xF08CD810 ++#define MSTP4_BITS 0x800001C4 ++#define MSTP5_BITS 0x44C00046 ++#define MSTP7_BITS 0x05BFE618 ++#define MSTP8_BITS 0x40C0FE85 ++#define MSTP9_BITS 0xFF979FFF ++#define MSTP10_BITS 0xFFFEFFE0 ++#define MSTP11_BITS 0x000001C0 ++ + #define R8A7791_CUT_ES2X 2 + #define IS_R8A7791_ES2() \ + (rmobile_get_cpu_rev_integer() == R8A7791_CUT_ES2X) +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7793.h u-boot/arch/arm/include/asm/arch-rmobile/r8a7793.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7793.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-rmobile/r8a7793.h 2015-01-01 17:34:32.089505941 +0100 +@@ -56,6 +56,20 @@ + /* + * R8A7793 I/O Product Information + */ ++ ++/* Module stop control/status register bits */ ++#define MSTP0_BITS 0x00640801 ++#define MSTP1_BITS 0x9B6C9B5A ++#define MSTP2_BITS 0x100D21FC ++#define MSTP3_BITS 0xF08CD810 ++#define MSTP4_BITS 0x800001C4 ++#define MSTP5_BITS 0x44C00046 ++#define MSTP7_BITS 0x05BFE618 ++#define MSTP8_BITS 0x40C0FE85 ++#define MSTP9_BITS 0xFF979FFF ++#define MSTP10_BITS 0xFFFEFFE0 ++#define MSTP11_BITS 0x000001C0 ++ + #define R8A7793_CUT_ES2X 2 + #define IS_R8A7793_ES2() \ + (rmobile_get_cpu_rev_integer() == R8A7793_CUT_ES2X) +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7794.h u-boot/arch/arm/include/asm/arch-rmobile/r8a7794.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7794.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-rmobile/r8a7794.h 2015-01-01 17:34:32.089505941 +0100 +@@ -14,4 +14,17 @@ + /* SH-I2C */ + #define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000 + ++/* Module stop control/status register bits */ ++#define MSTP0_BITS 0x00440801 ++#define MSTP1_BITS 0x936899DA ++#define MSTP2_BITS 0x100D21FC ++#define MSTP3_BITS 0xE084D810 ++#define MSTP4_BITS 0x800001C4 ++#define MSTP5_BITS 0x40C00044 ++#define MSTP7_BITS 0x013FE618 ++#define MSTP8_BITS 0x40803C05 ++#define MSTP9_BITS 0xFB879FEE ++#define MSTP10_BITS 0xFFFEFFE0 ++#define MSTP11_BITS 0x000001C0 ++ + #endif /* __ASM_ARCH_R8A7794_H */ +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/rcar-base.h u-boot/arch/arm/include/asm/arch-rmobile/rcar-base.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/rcar-base.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-rmobile/rcar-base.h 2015-01-01 17:34:32.089505941 +0100 +@@ -29,6 +29,45 @@ + #define SCIF4_BASE 0xE6EE0000 + #define SCIF5_BASE 0xE6EE8000 + ++/* Module stop status register */ ++#define MSTPSR0 0xE6150030 ++#define MSTPSR1 0xE6150038 ++#define MSTPSR2 0xE6150040 ++#define MSTPSR3 0xE6150048 ++#define MSTPSR4 0xE615004C ++#define MSTPSR5 0xE615003C ++#define MSTPSR7 0xE61501C4 ++#define MSTPSR8 0xE61509A0 ++#define MSTPSR9 0xE61509A4 ++#define MSTPSR10 0xE61509A8 ++#define MSTPSR11 0xE61509AC ++ ++/* Realtime module stop control register */ ++#define RMSTPCR0 0xE6150110 ++#define RMSTPCR1 0xE6150114 ++#define RMSTPCR2 0xE6150118 ++#define RMSTPCR3 0xE615011C ++#define RMSTPCR4 0xE6150120 ++#define RMSTPCR5 0xE6150124 ++#define RMSTPCR7 0xE615012C ++#define RMSTPCR8 0xE6150980 ++#define RMSTPCR9 0xE6150984 ++#define RMSTPCR10 0xE6150988 ++#define RMSTPCR11 0xE615098C ++ ++/* System module stop control register */ ++#define SMSTPCR0 0xE6150130 ++#define SMSTPCR1 0xE6150134 ++#define SMSTPCR2 0xE6150138 ++#define SMSTPCR3 0xE615013C ++#define SMSTPCR4 0xE6150140 ++#define SMSTPCR5 0xE6150144 ++#define SMSTPCR7 0xE615014C ++#define SMSTPCR8 0xE6150990 ++#define SMSTPCR9 0xE6150994 ++#define SMSTPCR10 0xE6150998 ++#define SMSTPCR11 0xE615099C ++ + /* + * SH-I2C + * Ch2 and ch3 are different address. These are defined +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/rcar-mstp.h u-boot/arch/arm/include/asm/arch-rmobile/rcar-mstp.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/rcar-mstp.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-rmobile/rcar-mstp.h 2015-01-01 17:34:32.089505941 +0100 +@@ -0,0 +1,109 @@ ++/* ++ * arch/arm/include/asm/arch-rmobile/rcar-mstp.h ++ * ++ * Copyright (C) 2013, 2014 Nobuhiro Iwamatsu ++ * Copyright (C) 2013, 2014 Renesas Electronics Corporation ++ * ++ * SPDX-License-Identifier: GPL-2.0 ++ */ ++ ++#ifndef __ASM_ARCH_RCAR_MSTP_H ++#define __ASM_ARCH_RCAR_MSTP_H ++ ++#define mstp_setbits(type, addr, saddr, set) \ ++ out_##type((saddr), in_##type(addr) | (set)) ++#define mstp_clrbits(type, addr, saddr, clear) \ ++ out_##type((saddr), in_##type(addr) & ~(clear)) ++#define mstp_setclrbits(type, addr, set, clear) \ ++ out_##type((addr), (in_##type(addr) | (set)) & ~(clear)) ++#define mstp_setbits_le32(addr, saddr, set) \ ++ mstp_setbits(le32, addr, saddr, set) ++#define mstp_clrbits_le32(addr, saddr, clear) \ ++ mstp_clrbits(le32, addr, saddr, clear) ++#define mstp_setclrbits_le32(addr, set, clear) \ ++ mstp_setclrbits(le32, addr, set, clear) ++ ++#ifndef CONFIG_SMSTP0_ENA ++#define CONFIG_SMSTP0_ENA 0x00 ++#endif ++#ifndef CONFIG_SMSTP1_ENA ++#define CONFIG_SMSTP1_ENA 0x00 ++#endif ++#ifndef CONFIG_SMSTP2_ENA ++#define CONFIG_SMSTP2_ENA 0x00 ++#endif ++#ifndef CONFIG_SMSTP3_ENA ++#define CONFIG_SMSTP3_ENA 0x00 ++#endif ++#ifndef CONFIG_SMSTP4_ENA ++#define CONFIG_SMSTP4_ENA 0x00 ++#endif ++#ifndef CONFIG_SMSTP5_ENA ++#define CONFIG_SMSTP5_ENA 0x00 ++#endif ++#ifndef CONFIG_SMSTP6_ENA ++#define CONFIG_SMSTP6_ENA 0x00 ++#endif ++#ifndef CONFIG_SMSTP7_ENA ++#define CONFIG_SMSTP7_ENA 0x00 ++#endif ++#ifndef CONFIG_SMSTP8_ENA ++#define CONFIG_SMSTP8_ENA 0x00 ++#endif ++#ifndef CONFIG_SMSTP9_ENA ++#define CONFIG_SMSTP9_ENA 0x00 ++#endif ++#ifndef CONFIG_SMSTP10_ENA ++#define CONFIG_SMSTP10_ENA 0x00 ++#endif ++#ifndef CONFIG_SMSTP11_ENA ++#define CONFIG_SMSTP11_ENA 0x00 ++#endif ++ ++#ifndef CONFIG_RMSTP0_ENA ++#define CONFIG_RMSTP0_ENA 0x00 ++#endif ++#ifndef CONFIG_RMSTP1_ENA ++#define CONFIG_RMSTP1_ENA 0x00 ++#endif ++#ifndef CONFIG_RMSTP2_ENA ++#define CONFIG_RMSTP2_ENA 0x00 ++#endif ++#ifndef CONFIG_RMSTP3_ENA ++#define CONFIG_RMSTP3_ENA 0x00 ++#endif ++#ifndef CONFIG_RMSTP4_ENA ++#define CONFIG_RMSTP4_ENA 0x00 ++#endif ++#ifndef CONFIG_RMSTP5_ENA ++#define CONFIG_RMSTP5_ENA 0x00 ++#endif ++#ifndef CONFIG_RMSTP6_ENA ++#define CONFIG_RMSTP6_ENA 0x00 ++#endif ++#ifndef CONFIG_RMSTP7_ENA ++#define CONFIG_RMSTP7_ENA 0x00 ++#endif ++#ifndef CONFIG_RMSTP8_ENA ++#define CONFIG_RMSTP8_ENA 0x00 ++#endif ++#ifndef CONFIG_RMSTP9_ENA ++#define CONFIG_RMSTP9_ENA 0x00 ++#endif ++#ifndef CONFIG_RMSTP10_ENA ++#define CONFIG_RMSTP10_ENA 0x00 ++#endif ++#ifndef CONFIG_RMSTP11_ENA ++#define CONFIG_RMSTP11_ENA 0x00 ++#endif ++ ++struct mstp_ctl { ++ u32 s_addr; ++ u32 s_dis; ++ u32 s_ena; ++ u32 r_addr; ++ u32 r_dis; ++ u32 r_ena; ++}; ++ ++#endif /* __ASM_ARCH_RCAR_MSTP_H */ +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/clock_manager.h u-boot/arch/arm/include/asm/arch-socfpga/clock_manager.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/clock_manager.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-socfpga/clock_manager.h 2015-01-01 17:34:32.089505941 +0100 +@@ -14,6 +14,7 @@ + unsigned int cm_get_l4_sp_clk_hz(void); + unsigned int cm_get_mmc_controller_clk_hz(void); + unsigned int cm_get_qspi_controller_clk_hz(void); ++unsigned int cm_get_spi_controller_clk_hz(void); + #endif + + typedef struct { +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/freeze_controller.h u-boot/arch/arm/include/asm/arch-socfpga/freeze_controller.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/freeze_controller.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-socfpga/freeze_controller.h 2015-01-01 17:34:32.089505941 +0100 +@@ -42,7 +42,6 @@ + #define SYSMGR_FRZCTRL_HWCTRL_VIO1REQ_MASK 0x00000001 + #define SYSMGR_FRZCTRL_HWCTRL_VIO1STATE_ENUM_FROZEN 0x2 + #define SYSMGR_FRZCTRL_HWCTRL_VIO1STATE_ENUM_THAWED 0x1 +-#define SYSMGR_FRZCTRL_VIOCTRL_SHIFT 0x2 + + void sys_mgr_frzctrl_freeze_req(void); + void sys_mgr_frzctrl_thaw_req(void); +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/scan_manager.h u-boot/arch/arm/include/asm/arch-socfpga/scan_manager.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/scan_manager.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-socfpga/scan_manager.h 2015-01-01 17:34:32.089505941 +0100 +@@ -13,6 +13,7 @@ + u32 padding[2]; + u32 fifo_single_byte; + u32 fifo_double_byte; ++ u32 fifo_triple_byte; + u32 fifo_quad_byte; + }; + +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/gpio.h u-boot/arch/arm/include/asm/arch-stv0991/gpio.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/gpio.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-stv0991/gpio.h 2015-01-01 17:34:32.093505875 +0100 +@@ -0,0 +1,22 @@ ++/* ++ * (C) Copyright 2014 ++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __ASM_ARCH_STV0991_GPIO_H ++#define __ASM_ARCH_STV0991_GPIO_H ++ ++enum gpio_direction { ++ GPIO_DIRECTION_IN, ++ GPIO_DIRECTION_OUT, ++}; ++ ++struct gpio_regs { ++ u32 data; /* offset 0x0 */ ++ u32 reserved[0xff]; /* 0x4--0x3fc */ ++ u32 dir; /* offset 0x400 */ ++}; ++ ++#endif /* __ASM_ARCH_STV0991_GPIO_H */ +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/hardware.h u-boot/arch/arm/include/asm/arch-stv0991/hardware.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/hardware.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-stv0991/hardware.h 2015-01-01 17:34:32.093505875 +0100 +@@ -0,0 +1,73 @@ ++/* ++ * (C) Copyright 2014 ++ * Vikas Manocha, STMicroelectronics, ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef _ASM_ARCH_HARDWARE_H ++#define _ASM_ARCH_HARDWARE_H ++ ++/* STV0991 */ ++#define SRAM0_BASE_ADDR 0x00000000UL ++#define SRAM1_BASE_ADDR 0x00068000UL ++#define SRAM2_BASE_ADDR 0x000D0000UL ++#define SRAM3_BASE_ADDR 0x00138000UL ++#define CFS_SRAM0_BASE_ADDR 0x00198000UL ++#define CFS_SRAM1_BASE_ADDR 0x001B8000UL ++#define FAST_SRAM_BASE_ADDR 0x001D8000UL ++#define FLASH_BASE_ADDR 0x40000000UL ++#define PL310_BASE_ADDR 0x70000000UL ++#define HSAXIM_BASE_ADDR 0x70100000UL ++#define IMGSS_BASE_ADDR 0x70200000UL ++#define ADC_BASE_ADDR 0x80000000UL ++#define GPIOA_BASE_ADDR 0x80001000UL ++#define GPIOB_BASE_ADDR 0x80002000UL ++#define GPIOC_BASE_ADDR 0x80003000UL ++#define HDM_BASE_ADDR 0x80004000UL ++#define THSENS_BASE_ADDR 0x80200000UL ++#define GPTIMER2_BASE_ADDR 0x80201000UL ++#define GPTIMER1_BASE_ADDR 0x80202000UL ++#define QSPI_BASE_ADDR 0x80203000UL ++#define CGU_BASE_ADDR 0x80204000UL ++#define CREG_BASE_ADDR 0x80205000UL ++#define PEC_BASE_ADDR 0x80206000UL ++#define WDRU_BASE_ADDR 0x80207000UL ++#define BSEC_BASE_ADDR 0x80208000UL ++#define DAP_ROM_BASE_ADDR 0x80210000UL ++#define SOC_CTI_BASE_ADDR 0x80211000UL ++#define TPIU_BASE_ADDR 0x80212000UL ++#define TMC_ETF_BASE_ADDR 0x80213000UL ++#define R4_ETM_BASE_ADDR 0x80214000UL ++#define R4_CTI_BASE_ADDR 0x80215000UL ++#define R4_DBG_BASE_ADDR 0x80216000UL ++#define GMAC_BASE_ADDR 0x80300000UL ++#define RNSS_BASE_ADDR 0x80302000UL ++#define CRYP_BASE_ADDR 0x80303000UL ++#define HASH_BASE_ADDR 0x80304000UL ++#define GPDMA_BASE_ADDR 0x80305000UL ++#define ISA_BASE_ADDR 0x8032A000UL ++#define HCI_BASE_ADDR 0x80400000UL ++#define I2C1_BASE_ADDR 0x80401000UL ++#define I2C2_BASE_ADDR 0x80402000UL ++#define SAI_BASE_ADDR 0x80403000UL ++#define USI_BASE_ADDR 0x80404000UL ++#define SPI1_BASE_ADDR 0x80405000UL ++#define UART_BASE_ADDR 0x80406000UL ++#define SPI2_BASE_ADDR 0x80500000UL ++#define CAN_BASE_ADDR 0x80501000UL ++#define USART1_BASE_ADDR 0x80502000UL ++#define USART2_BASE_ADDR 0x80503000UL ++#define USART3_BASE_ADDR 0x80504000UL ++#define USART4_BASE_ADDR 0x80505000UL ++#define USART5_BASE_ADDR 0x80506000UL ++#define USART6_BASE_ADDR 0x80507000UL ++#define SDI2_BASE_ADDR 0x80600000UL ++#define SDI1_BASE_ADDR 0x80601000UL ++#define VICA_BASE_ADDR 0x81000000UL ++#define VICB_BASE_ADDR 0x81001000UL ++#define STM_CHANNELS_BASE_ADDR 0x81100000UL ++#define STM_BASE_ADDR 0x81110000UL ++#define SROM_BASE_ADDR 0xFFFF0000UL ++ ++#endif /* _ASM_ARCH_HARDWARE_H */ +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h 2015-01-01 17:34:32.093505875 +0100 +@@ -0,0 +1,116 @@ ++/* ++ * (C) Copyright 2014 ++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef _STV0991_CGU_H ++#define _STV0991_CGU_H ++ ++struct stv0991_cgu_regs { ++ u32 cpu_freq; /* offset 0x0 */ ++ u32 icn2_freq; /* offset 0x4 */ ++ u32 dma_freq; /* offset 0x8 */ ++ u32 isp_freq; /* offset 0xc */ ++ u32 h264_freq; /* offset 0x10 */ ++ u32 osif_freq; /* offset 0x14 */ ++ u32 ren_freq; /* offset 0x18 */ ++ u32 tim_freq; /* offset 0x1c */ ++ u32 sai_freq; /* offset 0x20 */ ++ u32 eth_freq; /* offset 0x24 */ ++ u32 i2c_freq; /* offset 0x28 */ ++ u32 spi_freq; /* offset 0x2c */ ++ u32 uart_freq; /* offset 0x30 */ ++ u32 qspi_freq; /* offset 0x34 */ ++ u32 sdio_freq; /* offset 0x38 */ ++ u32 usi_freq; /* offset 0x3c */ ++ u32 can_line_freq; /* offset 0x40 */ ++ u32 debug_freq; /* offset 0x44 */ ++ u32 trace_freq; /* offset 0x48 */ ++ u32 stm_freq; /* offset 0x4c */ ++ u32 eth_ctrl; /* offset 0x50 */ ++ u32 reserved[3]; /* offset 0x54 */ ++ u32 osc_ctrl; /* offset 0x60 */ ++ u32 pll1_ctrl; /* offset 0x64 */ ++ u32 pll1_freq; /* offset 0x68 */ ++ u32 pll1_fract; /* offset 0x6c */ ++ u32 pll1_spread; /* offset 0x70 */ ++ u32 pll1_status; /* offset 0x74 */ ++ u32 pll2_ctrl; /* offset 0x78 */ ++ u32 pll2_freq; /* offset 0x7c */ ++ u32 pll2_fract; /* offset 0x80 */ ++ u32 pll2_spread; /* offset 0x84 */ ++ u32 pll2_status; /* offset 0x88 */ ++ u32 cgu_enable_1; /* offset 0x8c */ ++ u32 cgu_enable_2; /* offset 0x90 */ ++ u32 cgu_isp_pulse; /* offset 0x94 */ ++ u32 cgu_h264_pulse; /* offset 0x98 */ ++ u32 cgu_osif_pulse; /* offset 0x9c */ ++ u32 cgu_ren_pulse; /* offset 0xa0 */ ++ ++}; ++ ++/* CGU Timer */ ++#define CLK_TMR_OSC 0 ++#define CLK_TMR_MCLK 1 ++#define CLK_TMR_PLL1 2 ++#define CLK_TMR_PLL2 3 ++#define MDIV_SHIFT_TMR 3 ++#define DIV_SHIFT_TMR 6 ++ ++#define TIMER1_CLK_CFG (0 << DIV_SHIFT_TMR \ ++ | 0 << MDIV_SHIFT_TMR | CLK_TMR_MCLK) ++ ++/* Clock Enable/Disable */ ++ ++#define TIMER1_CLK_EN (1 << 15) ++ ++/* CGU Uart config */ ++#define CLK_UART_MCLK 0 ++#define CLK_UART_PLL1 1 ++#define CLK_UART_PLL2 2 ++ ++#define MDIV_SHIFT_UART 3 ++#define DIV_SHIFT_UART 6 ++ ++#define UART_CLK_CFG (4 << DIV_SHIFT_UART \ ++ | 1 << MDIV_SHIFT_UART | CLK_UART_MCLK) ++ ++/* CGU Ethernet clock config */ ++#define CLK_ETH_MCLK 0 ++#define CLK_ETH_PLL1 1 ++#define CLK_ETH_PLL2 2 ++ ++#define MDIV_SHIFT_ETH 3 ++#define DIV_SHIFT_ETH 6 ++#define DIV_ETH_125 9 ++#define DIV_ETH_50 12 ++#define DIV_ETH_P2P 15 ++ ++#define ETH_CLK_CFG (4 << DIV_ETH_P2P | 4 << DIV_ETH_50 \ ++ | 1 << DIV_ETH_125 \ ++ | 0 << DIV_SHIFT_ETH \ ++ | 3 << MDIV_SHIFT_ETH | CLK_ETH_PLL1) ++ /* CGU Ethernet control */ ++ ++#define ETH_CLK_TX_EXT_PHY 0 ++#define ETH_CLK_TX_125M 1 ++#define ETH_CLK_TX_25M 2 ++#define ETH_CLK_TX_2M5 3 ++#define ETH_CLK_TX_DIS 7 ++ ++#define ETH_CLK_RX_EXT_PHY 0 ++#define ETH_CLK_RX_25M 1 ++#define ETH_CLK_RX_2M5 2 ++#define ETH_CLK_RX_DIS 3 ++#define RX_CLK_SHIFT 3 ++#define ETH_CLK_MASK ~(0x1F) ++ ++#define ETH_PHY_MODE_GMII 0 ++#define ETH_PHY_MODE_RMII 1 ++#define ETH_PHY_CLK_DIS 1 ++ ++#define ETH_CLK_CTRL (ETH_CLK_RX_EXT_PHY << RX_CLK_SHIFT \ ++ | ETH_CLK_TX_EXT_PHY) ++#endif +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_creg.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_creg.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_creg.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_creg.h 2015-01-01 17:34:32.093505875 +0100 +@@ -0,0 +1,95 @@ ++/* ++ * (C) Copyright 2014 ++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef _STV0991_CREG_H ++#define _STV0991_CREG_H ++ ++struct stv0991_creg { ++ u32 version; /* offset 0x0 */ ++ u32 hdpctl; /* offset 0x4 */ ++ u32 hdpval; /* offset 0x8 */ ++ u32 hdpgposet; /* offset 0xc */ ++ u32 hdpgpoclr; /* offset 0x10 */ ++ u32 hdpgpoval; /* offset 0x14 */ ++ u32 stm_mux; /* offset 0x18 */ ++ u32 sysctrl_1; /* offset 0x1c */ ++ u32 sysctrl_2; /* offset 0x20 */ ++ u32 sysctrl_3; /* offset 0x24 */ ++ u32 sysctrl_4; /* offset 0x28 */ ++ u32 reserved_1[0x35]; /* offset 0x2C-0xFC */ ++ u32 mux1; /* offset 0x100 */ ++ u32 mux2; /* offset 0x104 */ ++ u32 mux3; /* offset 0x108 */ ++ u32 mux4; /* offset 0x10c */ ++ u32 mux5; /* offset 0x110 */ ++ u32 mux6; /* offset 0x114 */ ++ u32 mux7; /* offset 0x118 */ ++ u32 mux8; /* offset 0x11c */ ++ u32 mux9; /* offset 0x120 */ ++ u32 mux10; /* offset 0x124 */ ++ u32 mux11; /* offset 0x128 */ ++ u32 mux12; /* offset 0x12c */ ++ u32 mux13; /* offset 0x130 */ ++ u32 reserved_2[0x33]; /* offset 0x134-0x1FC */ ++ u32 cfg_pad1; /* offset 0x200 */ ++ u32 cfg_pad2; /* offset 0x204 */ ++ u32 cfg_pad3; /* offset 0x208 */ ++ u32 cfg_pad4; /* offset 0x20c */ ++ u32 cfg_pad5; /* offset 0x210 */ ++ u32 cfg_pad6; /* offset 0x214 */ ++ u32 cfg_pad7; /* offset 0x218 */ ++ u32 reserved_3[0x39]; /* offset 0x21C-0x2FC */ ++ u32 vdd_pad1; /* offset 0x300 */ ++ u32 vdd_pad2; /* offset 0x304 */ ++ u32 reserved_4[0x3e]; /* offset 0x308-0x3FC */ ++ u32 vdd_comp1; /* offset 0x400 */ ++}; ++ ++/* CREG MUX 12 register */ ++#define GPIOC_30_MUX_SHIFT 24 ++#define GPIOC_30_MUX_MASK ~(1 << GPIOC_30_MUX_SHIFT) ++#define CFG_GPIOC_30_UART_TX (1 << GPIOC_30_MUX_SHIFT) ++ ++#define GPIOC_31_MUX_SHIFT 28 ++#define GPIOC_31_MUX_MASK ~(1 << GPIOC_31_MUX_SHIFT) ++#define CFG_GPIOC_31_UART_RX (1 << GPIOC_31_MUX_SHIFT) ++ ++/* CREG MUX 7 register */ ++#define GPIOB_16_MUX_SHIFT 0 ++#define GPIOB_16_MUX_MASK ~(1 << GPIOB_16_MUX_SHIFT) ++#define CFG_GPIOB_16_UART_TX (1 << GPIOB_16_MUX_SHIFT) ++ ++#define GPIOB_17_MUX_SHIFT 4 ++#define GPIOB_17_MUX_MASK ~(1 << GPIOB_17_MUX_SHIFT) ++#define CFG_GPIOB_17_UART_RX (1 << GPIOB_17_MUX_SHIFT) ++ ++/* CREG CFG_PAD6 register */ ++ ++#define GPIOC_31_MODE_SHIFT 30 ++#define GPIOC_31_MODE_MASK ~(1 << GPIOC_31_MODE_SHIFT) ++#define CFG_GPIOC_31_MODE_OD (0 << GPIOC_31_MODE_SHIFT) ++#define CFG_GPIOC_31_MODE_PP (1 << GPIOC_31_MODE_SHIFT) ++ ++#define GPIOC_30_MODE_SHIFT 28 ++#define GPIOC_30_MODE_MASK ~(1 << GPIOC_30_MODE_SHIFT) ++#define CFG_GPIOC_30_MODE_LOW (0 << GPIOC_30_MODE_SHIFT) ++#define CFG_GPIOC_30_MODE_HIGH (1 << GPIOC_30_MODE_SHIFT) ++ ++/* CREG Ethernet pad config */ ++ ++#define VDD_ETH_PS_1V8 0 ++#define VDD_ETH_PS_2V5 2 ++#define VDD_ETH_PS_3V3 3 ++#define VDD_ETH_PS_MASK 0x3 ++ ++#define VDD_ETH_PS_SHIFT 12 ++#define ETH_VDD_CFG (VDD_ETH_PS_1V8 << VDD_ETH_PS_SHIFT) ++ ++#define VDD_ETH_M_PS_SHIFT 28 ++#define ETH_M_VDD_CFG (VDD_ETH_PS_1V8 << VDD_ETH_M_PS_SHIFT) ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_defs.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_defs.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_defs.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_defs.h 2015-01-01 17:34:32.093505875 +0100 +@@ -0,0 +1,16 @@ ++/* ++ * (C) Copyright 2014 ++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __STV0991_DEFS_H__ ++#define __STV0991_DEFS_H__ ++#include ++ ++extern int stv0991_pinmux_config(enum periph_id); ++extern int clock_setup(enum periph_clock); ++ ++#endif ++ +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h 2015-01-01 17:34:32.093505875 +0100 +@@ -0,0 +1,43 @@ ++/* ++ * (C) Copyright 2014 ++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef _STV0991_GPT_H ++#define _STV0991_GPT_H ++ ++#include ++ ++struct gpt_regs { ++ u32 cr1; ++ u32 cr2; ++ u32 reserved_1; ++ u32 dier; /* dma_int_en */ ++ u32 sr; /* status reg */ ++ u32 egr; /* event gen */ ++ u32 reserved_2[3]; /* offset 0x18--0x20*/ ++ u32 cnt; ++ u32 psc; ++ u32 arr; ++}; ++ ++struct gpt_regs *const gpt1_regs_ptr = ++ (struct gpt_regs *) GPTIMER1_BASE_ADDR; ++ ++/* Timer control1 register */ ++#define GPT_CR1_CEN 0x0001 ++#define GPT_MODE_AUTO_RELOAD (1 << 7) ++ ++/* Timer prescalar reg */ ++#define GPT_PRESCALER_128 0x128 ++ ++/* Auto reload register for free running config */ ++#define GPT_FREE_RUNNING 0xFFFF ++ ++/* Timer, HZ specific defines */ ++#define CONFIG_STV0991_HZ 1000 ++#define CONFIG_STV0991_HZ_CLOCK (27*1000*1000)/GPT_PRESCALER_128 ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_periph.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_periph.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_periph.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_periph.h 2015-01-01 17:34:32.093505875 +0100 +@@ -0,0 +1,44 @@ ++/* ++ * (C) Copyright 2014 ++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __ASM_ARM_ARCH_PERIPH_H ++#define __ASM_ARM_ARCH_PERIPH_H ++ ++/* ++ * Peripherals required for pinmux configuration. List will ++ * grow with support for more devices getting added. ++ * Numbering based on interrupt table. ++ * ++ */ ++enum periph_id { ++ UART_GPIOC_30_31 = 0, ++ UART_GPIOB_16_17, ++ ETH_GPIOB_10_31_C_0_4, ++ PERIPH_ID_I2C0, ++ PERIPH_ID_I2C1, ++ PERIPH_ID_I2C2, ++ PERIPH_ID_I2C3, ++ PERIPH_ID_I2C4, ++ PERIPH_ID_I2C5, ++ PERIPH_ID_I2C6, ++ PERIPH_ID_I2C7, ++ PERIPH_ID_SPI0, ++ PERIPH_ID_SPI1, ++ PERIPH_ID_SPI2, ++ PERIPH_ID_SDMMC0, ++ PERIPH_ID_SDMMC1, ++ PERIPH_ID_SDMMC2, ++ PERIPH_ID_SDMMC3, ++ PERIPH_ID_I2S1, ++}; ++ ++enum periph_clock { ++ UART_CLOCK_CFG = 0, ++ ETH_CLOCK_CFG, ++}; ++ ++#endif /* __ASM_ARM_ARCH_PERIPH_H */ +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h 2015-01-01 17:34:32.093505875 +0100 +@@ -0,0 +1,28 @@ ++/* ++ * (C) Copyright 2014 ++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef _STV0991_WD_RST_H ++#define _STV0991_WD_RST_H ++#include ++ ++struct stv0991_wd_ru { ++ u32 wdru_config; ++ u32 wdru_ctrl1; ++ u32 wdru_ctrl2; ++ u32 wdru_tim; ++ u32 wdru_count; ++ u32 wdru_stat; ++ u32 wdru_wrlock; ++}; ++ ++struct stv0991_wd_ru *const stv0991_wd_ru_ptr = \ ++ (struct stv0991_wd_ru *)WDRU_BASE_ADDR; ++ ++/* Watchdog control register */ ++#define WDRU_RST_SYS 0x1 ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-tegra/tegra_i2c.h u-boot/arch/arm/include/asm/arch-tegra/tegra_i2c.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-tegra/tegra_i2c.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-tegra/tegra_i2c.h 2015-01-01 17:34:32.097505809 +0100 +@@ -167,6 +167,6 @@ + * + * @return number of bus, or -1 if there is no DVC active + */ +-int tegra_i2c_get_dvc_bus_num(void); ++int tegra_i2c_get_dvc_bus(struct udevice **busp); + + #endif /* _TEGRA_I2C_H_ */ +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-vf610/imx-regs.h u-boot/arch/arm/include/asm/arch-vf610/imx-regs.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-vf610/imx-regs.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/arch-vf610/imx-regs.h 2015-01-01 17:34:32.109505612 +0100 +@@ -256,6 +256,14 @@ + #define DDRMC_CR161_TODTH_RD(v) (((v) & 0xf) << 8) + #define DDRMC_CR161_TODTH_WR(v) ((v) & 0xf) + ++/* System Reset Controller (SRC) */ ++#define SRC_SRSR_SW_RST (0x1 << 18) ++#define SRC_SRSR_RESETB (0x1 << 7) ++#define SRC_SRSR_JTAG_RST (0x1 << 5) ++#define SRC_SRSR_WDOG_M4 (0x1 << 4) ++#define SRC_SRSR_WDOG_A5 (0x1 << 3) ++#define SRC_SRSR_POR_RST (0x1 << 0) ++ + #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) + #include + +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/kona-common/clk.h u-boot/arch/arm/include/asm/kona-common/clk.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/kona-common/clk.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/kona-common/clk.h 2015-01-01 17:34:32.113505547 +0100 +@@ -25,5 +25,6 @@ + struct clk *clk_get_parent(struct clk *clk); + int clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep); + int clk_bsc_enable(void *base); ++int clk_usb_otg_enable(void *base); + + #endif +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/pcie_layerscape.h u-boot/arch/arm/include/asm/pcie_layerscape.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/pcie_layerscape.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/arm/include/asm/pcie_layerscape.h 2015-01-01 17:34:32.125505350 +0100 +@@ -0,0 +1,13 @@ ++/* ++ * Copyright 2014 Freescale Semiconductor, Inc. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __PCIE_LAYERSCAPE_H_ ++#define __PCIE_LAYERSCAPE_H_ ++ ++void pci_init_board(void); ++void ft_pcie_setup(void *blob, bd_t *bd); ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/semihosting.h u-boot/arch/arm/include/asm/semihosting.h +--- u-boot-2015.01-rc3/arch/arm/include/asm/semihosting.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/include/asm/semihosting.h 2015-01-01 17:34:32.125505350 +0100 +@@ -12,10 +12,6 @@ + * code for more information. + */ + int smh_load(const char *fname, void *memp, int avail, int verbose); +-int smh_read(int fd, void *memp, int len); +-int smh_open(const char *fname, char *modestr); +-int smh_close(int fd); +-int smh_len_fd(int fd); +-int smh_len(const char *fname); ++long smh_len(const char *fname); + + #endif /* __SEMIHOSTING_H__ */ +diff -ruN u-boot-2015.01-rc3/arch/arm/Kconfig u-boot/arch/arm/Kconfig +--- u-boot-2015.01-rc3/arch/arm/Kconfig 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/Kconfig 2015-01-01 17:34:31.989507580 +0100 +@@ -341,6 +341,10 @@ + bool "Support spear600" + select CPU_ARM926EJS + ++config TARGET_STV0991 ++ bool "Support stv0991" ++ select CPU_V7 ++ + config TARGET_X600 + bool "Support x600" + select CPU_ARM926EJS +@@ -650,6 +654,7 @@ + + config TARGET_TBS2910 + bool "Support tbs2910" ++ select CPU_V7 + + config TARGET_TQMA6 + bool "TQ Systems TQMa6 board" +@@ -728,12 +733,14 @@ + select ARM64 + + config TARGET_LS1021AQDS +- bool "Support ls1021aqds_nor" ++ bool "Support ls1021aqds" + select CPU_V7 ++ select SUPPORT_SPL + + config TARGET_LS1021ATWR +- bool "Support ls1021atwr_nor" ++ bool "Support ls1021atwr" + select CPU_V7 ++ select SUPPORT_SPL + + config TARGET_BALLOON3 + bool "Support balloon3" +@@ -793,6 +800,7 @@ + bool "Panasonic UniPhier platform" + select CPU_V7 + select SUPPORT_SPL ++ select SPL + select OF_CONTROL if !SPL_BUILD + + endchoice +@@ -953,6 +961,7 @@ + source "board/spear/x600/Kconfig" + source "board/st-ericsson/snowball/Kconfig" + source "board/st-ericsson/u8500/Kconfig" ++source "board/st/stv0991/Kconfig" + source "board/sunxi/Kconfig" + source "board/syteco/jadecpu/Kconfig" + source "board/syteco/zmx25/Kconfig" +diff -ruN u-boot-2015.01-rc3/arch/arm/lib/semihosting.c u-boot/arch/arm/lib/semihosting.c +--- u-boot-2015.01-rc3/arch/arm/lib/semihosting.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/arm/lib/semihosting.c 2015-01-01 17:34:32.133505219 +0100 +@@ -26,9 +26,9 @@ + /* + * Call the handler + */ +-static int smh_trap(unsigned int sysnum, void *addr) ++static long smh_trap(unsigned int sysnum, void *addr) + { +- register int result asm("r0"); ++ register long result asm("r0"); + #if defined(CONFIG_ARM64) + asm volatile ("hlt #0xf000" : "=r" (result) : "0"(sysnum), "r"(addr)); + #else +@@ -39,167 +39,164 @@ + } + + /* +- * Open, load a file into memory, and close it. Check that the available space +- * is sufficient to store the entire file. Return the bytes actually read from +- * the file as seen by the read function. The verbose flag enables some extra +- * printing of successful read status. ++ * Open a file on the host. Mode is "r" or "rb" currently. Returns a file ++ * descriptor or -1 on error. + */ +-int smh_load(const char *fname, void *memp, int avail, int verbose) ++static long smh_open(const char *fname, char *modestr) + { +- int ret, fd, len; +- +- ret = -1; +- +- debug("%s: fname \'%s\', avail %u, memp %p\n", __func__, fname, +- avail, memp); +- +- /* Open the file */ +- fd = smh_open(fname, "rb"); +- if (fd == -1) +- return ret; ++ long fd; ++ unsigned long mode; ++ struct smh_open_s { ++ const char *fname; ++ unsigned long mode; ++ size_t len; ++ } open; + +- /* Get the file length */ +- ret = smh_len_fd(fd); +- if (ret == -1) { +- smh_close(fd); +- return ret; +- } ++ debug("%s: file \'%s\', mode \'%s\'\n", __func__, fname, modestr); + +- /* Check that the file will fit in the supplied buffer */ +- if (ret > avail) { +- printf("%s: ERROR ret %d, avail %u\n", __func__, ret, +- avail); +- smh_close(fd); +- return ret; ++ /* Check the file mode */ ++ if (!(strcmp(modestr, "r"))) { ++ mode = MODE_READ; ++ } else if (!(strcmp(modestr, "rb"))) { ++ mode = MODE_READBIN; ++ } else { ++ printf("%s: ERROR mode \'%s\' not supported\n", __func__, ++ modestr); ++ return -1; + } + +- len = ret; +- +- /* Read the file into the buffer */ +- ret = smh_read(fd, memp, len); +- if (ret == 0) { +- /* Print successful load information if requested */ +- if (verbose) { +- printf("\n%s\n", fname); +- printf(" 0x%8p dest\n", memp); +- printf(" 0x%08x size\n", len); +- printf(" 0x%08x avail\n", avail); +- } +- } ++ open.fname = fname; ++ open.len = strlen(fname); ++ open.mode = mode; + +- /* Close the file */ +- smh_close(fd); ++ /* Open the file on the host */ ++ fd = smh_trap(SYSOPEN, &open); ++ if (fd == -1) ++ printf("%s: ERROR fd %ld for file \'%s\'\n", __func__, fd, ++ fname); + +- return ret; ++ return fd; + } + + /* + * Read 'len' bytes of file into 'memp'. Returns 0 on success, else failure + */ +-int smh_read(int fd, void *memp, int len) ++static long smh_read(long fd, void *memp, size_t len) + { +- int ret; ++ long ret; + struct smh_read_s { +- int fd; ++ long fd; + void *memp; +- int len; ++ size_t len; + } read; + +- debug("%s: fd %d, memp %p, len %d\n", __func__, fd, memp, len); ++ debug("%s: fd %ld, memp %p, len %lu\n", __func__, fd, memp, len); + + read.fd = fd; + read.memp = memp; + read.len = len; + + ret = smh_trap(SYSREAD, &read); +- if (ret == 0) { +- return 0; +- } else { ++ if (ret < 0) { + /* + * The ARM handler allows for returning partial lengths, + * but in practice this never happens so rather than create + * hard to maintain partial read loops and such, just fail + * with an error message. + */ +- printf("%s: ERROR ret %d, fd %d, len %u memp %p\n", ++ printf("%s: ERROR ret %ld, fd %ld, len %lu memp %p\n", + __func__, ret, fd, len, memp); ++ return -1; + } +- return ret; ++ ++ return 0; + } + + /* +- * Open a file on the host. Mode is "r" or "rb" currently. Returns a file +- * descriptor or -1 on error. ++ * Close the file using the file descriptor + */ +-int smh_open(const char *fname, char *modestr) ++static long smh_close(long fd) + { +- int ret, fd, mode; +- struct smh_open_s { +- const char *fname; +- unsigned int mode; +- unsigned int len; +- } open; ++ long ret; + +- debug("%s: file \'%s\', mode \'%s\'\n", __func__, fname, modestr); +- +- ret = -1; ++ debug("%s: fd %ld\n", __func__, fd); + +- /* Check the file mode */ +- if (!(strcmp(modestr, "r"))) { +- mode = MODE_READ; +- } else if (!(strcmp(modestr, "rb"))) { +- mode = MODE_READBIN; +- } else { +- printf("%s: ERROR mode \'%s\' not supported\n", __func__, +- modestr); +- return ret; +- } +- +- open.fname = fname; +- open.len = strlen(fname); +- open.mode = mode; +- +- /* Open the file on the host */ +- fd = smh_trap(SYSOPEN, &open); +- if (fd == -1) +- printf("%s: ERROR fd %d for file \'%s\'\n", __func__, fd, +- fname); ++ ret = smh_trap(SYSCLOSE, &fd); ++ if (ret == -1) ++ printf("%s: ERROR fd %ld\n", __func__, fd); + +- return fd; ++ return ret; + } + + /* +- * Close the file using the file descriptor ++ * Get the file length from the file descriptor + */ +-int smh_close(int fd) ++static long smh_len_fd(long fd) + { +- int ret; +- long fdlong; ++ long ret; + +- debug("%s: fd %d\n", __func__, fd); ++ debug("%s: fd %ld\n", __func__, fd); + +- fdlong = (long)fd; +- ret = smh_trap(SYSCLOSE, &fdlong); ++ ret = smh_trap(SYSFLEN, &fd); + if (ret == -1) +- printf("%s: ERROR fd %d\n", __func__, fd); ++ printf("%s: ERROR ret %ld, fd %ld\n", __func__, ret, fd); + + return ret; + } + + /* +- * Get the file length from the file descriptor ++ * Open, load a file into memory, and close it. Check that the available space ++ * is sufficient to store the entire file. Return the bytes actually read from ++ * the file as seen by the read function. The verbose flag enables some extra ++ * printing of successful read status. + */ +-int smh_len_fd(int fd) ++int smh_load(const char *fname, void *memp, int avail, int verbose) + { +- int ret; +- long fdlong; ++ long ret; ++ long fd; ++ size_t len; + +- debug("%s: fd %d\n", __func__, fd); ++ ret = -1; + +- fdlong = (long)fd; +- ret = smh_trap(SYSFLEN, &fdlong); +- if (ret == -1) +- printf("%s: ERROR ret %d\n", __func__, ret); ++ debug("%s: fname \'%s\', avail %u, memp %p\n", __func__, fname, ++ avail, memp); ++ ++ /* Open the file */ ++ fd = smh_open(fname, "rb"); ++ if (fd == -1) ++ return -1; ++ ++ /* Get the file length */ ++ ret = smh_len_fd(fd); ++ if (ret == -1) { ++ smh_close(fd); ++ return -1; ++ } ++ ++ /* Check that the file will fit in the supplied buffer */ ++ if (ret > avail) { ++ printf("%s: ERROR ret %ld, avail %u\n", __func__, ret, ++ avail); ++ smh_close(fd); ++ return -1; ++ } ++ ++ len = ret; ++ ++ /* Read the file into the buffer */ ++ ret = smh_read(fd, memp, len); ++ if (ret == 0) { ++ /* Print successful load information if requested */ ++ if (verbose) { ++ printf("\n%s\n", fname); ++ printf(" 0x%8p dest\n", memp); ++ printf(" 0x%08lx size\n", len); ++ printf(" 0x%08x avail\n", avail); ++ } ++ } ++ ++ /* Close the file */ ++ smh_close(fd); + + return ret; + } +@@ -207,26 +204,32 @@ + /* + * Get the file length from the filename + */ +-int smh_len(const char *fname) ++long smh_len(const char *fname) + { +- int ret, fd, len; ++ long ret; ++ long fd; ++ long len; + + debug("%s: file \'%s\'\n", __func__, fname); + + /* Open the file */ + fd = smh_open(fname, "rb"); +- if (fd == -1) ++ if (fd < 0) + return fd; + + /* Get the file length */ + len = smh_len_fd(fd); ++ if (len < 0) { ++ smh_close(fd); ++ return len; ++ } + + /* Close the file */ + ret = smh_close(fd); +- if (ret == -1) ++ if (ret < 0) + return ret; + +- debug("%s: returning len %d\n", __func__, len); ++ debug("%s: returning len %ld\n", __func__, len); + + /* Return the file length (or -1 error indication) */ + return len; +diff -ruN u-boot-2015.01-rc3/arch/microblaze/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/arch/microblaze/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h +diff -ruN u-boot-2015.01-rc3/arch/microblaze/dts/include/dt-bindings/reset/altr,rst-mgr.h u-boot/arch/microblaze/dts/include/dt-bindings/reset/altr,rst-mgr.h +diff -ruN u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/p5040_ids.c u-boot/arch/powerpc/cpu/mpc85xx/p5040_ids.c +--- u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/p5040_ids.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/powerpc/cpu/mpc85xx/p5040_ids.c 2015-01-01 17:34:32.221503777 +0100 +@@ -49,23 +49,23 @@ + + #ifdef CONFIG_SYS_DPAA_FMAN + struct liodn_id_table fman1_liodn_tbl[] = { +- SET_FMAN_RX_1G_LIODN(1, 0, 6), +- SET_FMAN_RX_1G_LIODN(1, 1, 7), +- SET_FMAN_RX_1G_LIODN(1, 2, 8), +- SET_FMAN_RX_1G_LIODN(1, 3, 9), +- SET_FMAN_RX_1G_LIODN(1, 4, 10), +- SET_FMAN_RX_10G_LIODN(1, 0, 11), ++ SET_FMAN_RX_1G_LIODN(1, 0, 11), ++ SET_FMAN_RX_1G_LIODN(1, 1, 12), ++ SET_FMAN_RX_1G_LIODN(1, 2, 13), ++ SET_FMAN_RX_1G_LIODN(1, 3, 14), ++ SET_FMAN_RX_1G_LIODN(1, 4, 15), ++ SET_FMAN_RX_10G_LIODN(1, 0, 16), + }; + int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); + + #if (CONFIG_SYS_NUM_FMAN == 2) + struct liodn_id_table fman2_liodn_tbl[] = { +- SET_FMAN_RX_1G_LIODN(2, 0, 12), +- SET_FMAN_RX_1G_LIODN(2, 1, 13), +- SET_FMAN_RX_1G_LIODN(2, 2, 14), +- SET_FMAN_RX_1G_LIODN(2, 3, 15), +- SET_FMAN_RX_1G_LIODN(2, 4, 16), +- SET_FMAN_RX_10G_LIODN(2, 0, 17), ++ SET_FMAN_RX_1G_LIODN(2, 0, 17), ++ SET_FMAN_RX_1G_LIODN(2, 1, 18), ++ SET_FMAN_RX_1G_LIODN(2, 2, 19), ++ SET_FMAN_RX_1G_LIODN(2, 3, 20), ++ SET_FMAN_RX_1G_LIODN(2, 4, 21), ++ SET_FMAN_RX_10G_LIODN(2, 0, 22), + }; + int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl); + #endif +diff -ruN u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/portals.c u-boot/arch/powerpc/cpu/mpc85xx/portals.c +--- u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/portals.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/powerpc/cpu/mpc85xx/portals.c 2015-01-01 17:34:32.221503777 +0100 +@@ -14,9 +14,46 @@ + #include + #include + ++#define MAX_BPORTALS (CONFIG_SYS_BMAN_CINH_SIZE / CONFIG_SYS_BMAN_SP_CINH_SIZE) ++#define MAX_QPORTALS (CONFIG_SYS_QMAN_CINH_SIZE / CONFIG_SYS_QMAN_SP_CINH_SIZE) ++static void inhibit_portals(void __iomem *addr, int max_portals, ++ int arch_max_portals, int portal_cinh_size) ++{ ++ uint32_t val; ++ int i; ++ ++ /* arch_max_portals is the maximum based on memory size. This includes ++ * the reserved memory in the SoC. max_portals the number of physical ++ * portals in the SoC */ ++ if (max_portals > arch_max_portals) { ++ printf("ERROR: portal config error\n"); ++ max_portals = arch_max_portals; ++ } ++ ++ for (i = 0; i < max_portals; i++) { ++ out_be32(addr, -1); ++ val = in_be32(addr); ++ if (!val) { ++ printf("ERROR: Stopped after %d portals\n", i); ++ goto done; ++ } ++ addr += portal_cinh_size; ++ } ++#ifdef DEBUG ++ printf("Cleared %d portals\n", i); ++#endif ++done: ++ ++ return; ++} ++ + void setup_portals(void) + { + ccsr_qman_t *qman = (void *)CONFIG_SYS_FSL_QMAN_ADDR; ++ void __iomem *bpaddr = (void *)CONFIG_SYS_BMAN_CINH_BASE + ++ CONFIG_SYS_BMAN_SWP_ISDR_REG; ++ void __iomem *qpaddr = (void *)CONFIG_SYS_QMAN_CINH_BASE + ++ CONFIG_SYS_QMAN_SWP_ISDR_REG; + #ifdef CONFIG_FSL_CORENET + int i; + +@@ -38,6 +75,12 @@ + out_be32(&qman->qcsp_bare, (u32)(CONFIG_SYS_QMAN_MEM_PHYS >> 32)); + #endif + out_be32(&qman->qcsp_bar, (u32)CONFIG_SYS_QMAN_MEM_PHYS); ++ ++ /* Change default state of BMan ISDR portals to all 1s */ ++ inhibit_portals(bpaddr, CONFIG_SYS_BMAN_NUM_PORTALS, MAX_BPORTALS, ++ CONFIG_SYS_BMAN_SP_CINH_SIZE); ++ inhibit_portals(qpaddr, CONFIG_SYS_QMAN_NUM_PORTALS, MAX_QPORTALS, ++ CONFIG_SYS_QMAN_SP_CINH_SIZE); + } + + /* Update portal containter to match LAW setup of portal in phy map */ +diff -ruN u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/tlb.c u-boot/arch/powerpc/cpu/mpc85xx/tlb.c +--- u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/tlb.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/powerpc/cpu/mpc85xx/tlb.c 2015-01-01 17:34:32.221503777 +0100 +@@ -299,12 +299,16 @@ + { + unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE; + u64 memsize = (u64)memsize_in_meg << 20; ++ u64 size; + +- memsize = min(memsize, (u64)CONFIG_MAX_MEM_MAPPED); +- memsize = tlb_map_range(ram_tlb_address, p_addr, memsize, TLB_MAP_RAM); ++ size = min(memsize, (u64)CONFIG_MAX_MEM_MAPPED); ++ size = tlb_map_range(ram_tlb_address, p_addr, size, TLB_MAP_RAM); + +- if (memsize) +- print_size(memsize, " left unmapped\n"); ++ if (size || memsize > CONFIG_MAX_MEM_MAPPED) { ++ print_size(memsize > CONFIG_MAX_MEM_MAPPED ? ++ memsize - CONFIG_MAX_MEM_MAPPED + size : size, ++ " left unmapped\n"); ++ } + + return memsize_in_meg; + } +diff -ruN u-boot-2015.01-rc3/arch/powerpc/cpu/mpc8xxx/fdt.c u-boot/arch/powerpc/cpu/mpc8xxx/fdt.c +--- u-boot-2015.01-rc3/arch/powerpc/cpu/mpc8xxx/fdt.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/powerpc/cpu/mpc8xxx/fdt.c 2015-01-01 17:34:32.225503711 +0100 +@@ -73,110 +73,6 @@ + } + #endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */ + +-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) +-static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode, +- const char *phy_type, int start_offset) +-{ +- const char *compat_dr = "fsl-usb2-dr"; +- const char *compat_mph = "fsl-usb2-mph"; +- const char *prop_mode = "dr_mode"; +- const char *prop_type = "phy_type"; +- const char *node_type = NULL; +- int node_offset; +- int err; +- +- node_offset = fdt_node_offset_by_compatible(blob, +- start_offset, compat_mph); +- if (node_offset < 0) { +- node_offset = fdt_node_offset_by_compatible(blob, +- start_offset, compat_dr); +- if (node_offset < 0) { +- printf("WARNING: could not find compatible" +- " node %s or %s: %s.\n", compat_mph, +- compat_dr, fdt_strerror(node_offset)); +- return -1; +- } else +- node_type = compat_dr; +- } else +- node_type = compat_mph; +- +- if (mode) { +- err = fdt_setprop(blob, node_offset, prop_mode, mode, +- strlen(mode) + 1); +- if (err < 0) +- printf("WARNING: could not set %s for %s: %s.\n", +- prop_mode, node_type, fdt_strerror(err)); +- } +- +- if (phy_type) { +- err = fdt_setprop(blob, node_offset, prop_type, phy_type, +- strlen(phy_type) + 1); +- if (err < 0) +- printf("WARNING: could not set %s for %s: %s.\n", +- prop_type, node_type, fdt_strerror(err)); +- } +- +- return node_offset; +-} +- +-void fdt_fixup_dr_usb(void *blob, bd_t *bd) +-{ +- const char *modes[] = { "host", "peripheral", "otg" }; +- const char *phys[] = { "ulpi", "utmi" }; +- int usb_mode_off = -1; +- int usb_phy_off = -1; +- char str[5]; +- int i, j; +- +- for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) { +- const char *dr_mode_type = NULL; +- const char *dr_phy_type = NULL; +- int mode_idx = -1, phy_idx = -1; +- snprintf(str, 5, "%s%d", "usb", i); +- if (hwconfig(str)) { +- for (j = 0; j < ARRAY_SIZE(modes); j++) { +- if (hwconfig_subarg_cmp(str, "dr_mode", +- modes[j])) { +- mode_idx = j; +- break; +- } +- } +- +- for (j = 0; j < ARRAY_SIZE(phys); j++) { +- if (hwconfig_subarg_cmp(str, "phy_type", +- phys[j])) { +- phy_idx = j; +- break; +- } +- } +- +- if (mode_idx < 0 && phy_idx < 0) { +- printf("WARNING: invalid phy or mode\n"); +- return; +- } +- +- if (mode_idx > -1) +- dr_mode_type = modes[mode_idx]; +- +- if (phy_idx > -1) +- dr_phy_type = phys[phy_idx]; +- } +- +- usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, +- dr_mode_type, NULL, usb_mode_off); +- +- if (usb_mode_off < 0) +- return; +- +- usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, +- NULL, dr_phy_type, usb_phy_off); +- +- if (usb_phy_off < 0) +- return; +- } +-} +-#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */ +- + /* + * update crypto node properties to a specified revision of the SEC + * called with sec_rev == 0 if not on an E processor +diff -ruN u-boot-2015.01-rc3/arch/sandbox/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/arch/sandbox/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h +diff -ruN u-boot-2015.01-rc3/arch/sandbox/dts/include/dt-bindings/reset/altr,rst-mgr.h u-boot/arch/sandbox/dts/include/dt-bindings/reset/altr,rst-mgr.h +diff -ruN u-boot-2015.01-rc3/arch/sandbox/dts/sandbox.dts u-boot/arch/sandbox/dts/sandbox.dts +--- u-boot-2015.01-rc3/arch/sandbox/dts/sandbox.dts 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/sandbox/dts/sandbox.dts 2015-01-01 17:34:32.241503449 +0100 +@@ -134,6 +134,23 @@ + num-gpios = <20>; + }; + ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ compatible = "sandbox,i2c"; ++ clock-frequency = <400000>; ++ eeprom@2c { ++ reg = <0x2c>; ++ compatible = "i2c-eeprom"; ++ emul { ++ compatible = "sandbox,i2c-eeprom"; ++ sandbox,filename = "i2c.bin"; ++ sandbox,size = <128>; ++ }; ++ }; ++ }; ++ + spi@0 { + #address-cells = <1>; + #size-cells = <0>; +diff -ruN u-boot-2015.01-rc3/arch/sandbox/include/asm/test.h u-boot/arch/sandbox/include/asm/test.h +--- u-boot-2015.01-rc3/arch/sandbox/include/asm/test.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/sandbox/include/asm/test.h 2015-01-01 17:34:32.241503449 +0100 +@@ -0,0 +1,26 @@ ++/* ++ * Test-related constants for sandbox ++ * ++ * Copyright (c) 2014 Google, Inc ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __ASM_TEST_H ++#define __ASM_TEST_H ++ ++/* The sandbox driver always permits an I2C device with this address */ ++#define SANDBOX_I2C_TEST_ADDR 0x59 ++ ++enum sandbox_i2c_eeprom_test_mode { ++ SIE_TEST_MODE_NONE, ++ /* Permits read/write of only one byte per I2C transaction */ ++ SIE_TEST_MODE_SINGLE_BYTE, ++}; ++ ++void sandbox_i2c_eeprom_set_test_mode(struct udevice *dev, ++ enum sandbox_i2c_eeprom_test_mode mode); ++ ++void sandbox_i2c_eeprom_set_offset_len(struct udevice *dev, int offset_len); ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/cpu.c u-boot/arch/x86/cpu/ivybridge/cpu.c +--- u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/cpu.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/cpu/ivybridge/cpu.c 2015-01-01 17:34:32.249503317 +0100 +@@ -263,6 +263,7 @@ + static int report_bist_failure(void) + { + if (gd->arch.bist != 0) { ++ post_code(POST_BIST_FAILURE); + printf("BIST failed: %08x\n", gd->arch.bist); + return -EFAULT; + } +diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/microcode_intel.c u-boot/arch/x86/cpu/ivybridge/microcode_intel.c +--- u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/microcode_intel.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/cpu/ivybridge/microcode_intel.c 2015-01-01 17:34:32.249503317 +0100 +@@ -40,6 +40,8 @@ + update->data = fdt_getprop(blob, node, "data", &update->size); + if (!update->data) + return -EINVAL; ++ update->data += 48; ++ update->size -= 48; + + update->header_version = fdtdec_get_int(blob, node, + "intel,header-version", 0); +@@ -48,17 +50,17 @@ + update->date_code = fdtdec_get_int(blob, node, + "intel,date-code", 0); + update->processor_signature = fdtdec_get_int(blob, node, +- "intel.processor-signature", 0); ++ "intel,processor-signature", 0); + update->checksum = fdtdec_get_int(blob, node, "intel,checksum", 0); + update->loader_revision = fdtdec_get_int(blob, node, +- "loader-revision", 0); ++ "intel,loader-revision", 0); + update->processor_flags = fdtdec_get_int(blob, node, +- "processor-flags", 0); ++ "intel,processor-flags", 0); + + return 0; + } + +-static uint32_t microcode_read_rev(void) ++static inline uint32_t microcode_read_rev(void) + { + /* + * Some Intel CPUs can be very finicky about the CPUID sequence used. +@@ -114,6 +116,7 @@ + { + struct microcode_update cpu, update; + const void *blob = gd->fdt_blob; ++ int skipped; + int count; + int node; + int ret; +@@ -121,12 +124,13 @@ + microcode_read_cpu(&cpu); + node = 0; + count = 0; ++ skipped = 0; + do { + node = fdtdec_next_compatible(blob, node, + COMPAT_INTEL_MICROCODE); + if (node < 0) { + debug("%s: Found %d updates\n", __func__, count); +- return count ? 0 : -ENOENT; ++ return count ? 0 : skipped ? -EEXIST : -ENOENT; + } + + ret = microcode_decode_node(blob, node, &update); +@@ -135,12 +139,15 @@ + ret); + return ret; + } +- if (update.processor_signature == cpu.processor_signature && +- (update.processor_flags & cpu.processor_flags)) { +- debug("%s: Update already exists\n", __func__); +- return -EEXIST; ++ if (!(update.processor_signature == cpu.processor_signature && ++ (update.processor_flags & cpu.processor_flags))) { ++ debug("%s: Skipping non-matching update, sig=%x, pf=%x\n", ++ __func__, update.processor_signature, ++ update.processor_flags); ++ skipped++; ++ continue; + } +- ++ ret = microcode_read_rev(); + wrmsr(0x79, (ulong)update.data, 0); + debug("microcode: updated to revision 0x%x date=%04x-%02x-%02x\n", + microcode_read_rev(), update.date_code & 0xffff, +diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/sdram.c u-boot/arch/x86/cpu/ivybridge/sdram.c +--- u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/sdram.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/cpu/ivybridge/sdram.c 2015-01-01 17:34:32.253503252 +0100 +@@ -177,7 +177,7 @@ + + debug("PEI data at %p, size %x:\n", pei_data, sizeof(*pei_data)); + +- data = (char *)CONFIG_X86_MRC_START; ++ data = (char *)CONFIG_X86_MRC_ADDR; + if (data) { + int rv; + int (*func)(struct pei_data *); +diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/Makefile u-boot/arch/x86/cpu/Makefile +--- u-boot-2015.01-rc3/arch/x86/cpu/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/cpu/Makefile 2015-01-01 17:34:32.249503317 +0100 +@@ -15,6 +15,7 @@ + obj-$(CONFIG_SYS_COREBOOT) += coreboot/ + obj-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += ivybridge/ + obj-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += ivybridge/ ++obj-$(CONFIG_INTEL_QUEENSBAY) += queensbay/ + obj-y += lapic.o + obj-$(CONFIG_PCI) += pci.o + obj-y += turbo.o +diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/fsp_configs.c u-boot/arch/x86/cpu/queensbay/fsp_configs.c +--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/fsp_configs.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/cpu/queensbay/fsp_configs.c 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,20 @@ ++/* ++ * Copyright (C) 2013, Intel Corporation ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: Intel ++ */ ++ ++#include ++#include ++ ++void update_fsp_upd(struct upd_region *fsp_upd) ++{ ++ /* Override any UPD setting if required */ ++ ++ /* Uncomment the line below to enable DEBUG message */ ++ /* fsp_upd->serial_dbgport_type = 1; */ ++ ++ /* Examples on how to initialize the pointers in UPD region */ ++ /* fsp_upd->pcd_example = (EXAMPLE_DATA *)&example; */ ++} +diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/fsp_support.c u-boot/arch/x86/cpu/queensbay/fsp_support.c +--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/fsp_support.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/cpu/queensbay/fsp_support.c 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,401 @@ ++/* ++ * Copyright (C) 2013, Intel Corporation ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: Intel ++ */ ++ ++#include ++#include ++#include ++ ++/** ++ * Compares two GUIDs ++ * ++ * If the GUIDs are identical then true is returned. ++ * If there are any bit differences in the two GUIDs, then false is returned. ++ * ++ * @guid1: A pointer to a 128 bit GUID. ++ * @guid2: A pointer to a 128 bit GUID. ++ * ++ * @retval true: guid1 and guid2 are identical. ++ * @retval false: guid1 and guid2 are not identical. ++ */ ++static bool compare_guid(const struct efi_guid *guid1, ++ const struct efi_guid *guid2) ++{ ++ if (memcmp(guid1, guid2, sizeof(struct efi_guid)) == 0) ++ return true; ++ else ++ return false; ++} ++ ++u32 __attribute__((optimize("O0"))) find_fsp_header(void) ++{ ++ /* ++ * This function may be called before the a stack is established, ++ * so special care must be taken. First, it cannot declare any local ++ * variable using stack. Only register variable can be used here. ++ * Secondly, some compiler version will add prolog or epilog code ++ * for the C function. If so the function call may not work before ++ * stack is ready. ++ * ++ * GCC 4.8.1 has been verified to be working for the following codes. ++ */ ++ volatile register u8 *fsp asm("eax"); ++ ++ /* Initalize the FSP base */ ++ fsp = (u8 *)CONFIG_FSP_ADDR; ++ ++ /* Check the FV signature, _FVH */ ++ if (((struct fv_header *)fsp)->sign == EFI_FVH_SIGNATURE) { ++ /* Go to the end of the FV header and align the address */ ++ fsp += ((struct fv_header *)fsp)->ext_hdr_off; ++ fsp += ((struct fv_ext_header *)fsp)->ext_hdr_size; ++ fsp = (u8 *)(((u32)fsp + 7) & 0xFFFFFFF8); ++ } else { ++ fsp = 0; ++ } ++ ++ /* Check the FFS GUID */ ++ if (fsp && ++ ((struct ffs_file_header *)fsp)->name.data1 == FSP_GUID_DATA1 && ++ ((struct ffs_file_header *)fsp)->name.data2 == FSP_GUID_DATA2 && ++ ((struct ffs_file_header *)fsp)->name.data3 == FSP_GUID_DATA3 && ++ ((struct ffs_file_header *)fsp)->name.data4[0] == FSP_GUID_DATA4_0 && ++ ((struct ffs_file_header *)fsp)->name.data4[1] == FSP_GUID_DATA4_1 && ++ ((struct ffs_file_header *)fsp)->name.data4[2] == FSP_GUID_DATA4_2 && ++ ((struct ffs_file_header *)fsp)->name.data4[3] == FSP_GUID_DATA4_3 && ++ ((struct ffs_file_header *)fsp)->name.data4[4] == FSP_GUID_DATA4_4 && ++ ((struct ffs_file_header *)fsp)->name.data4[5] == FSP_GUID_DATA4_5 && ++ ((struct ffs_file_header *)fsp)->name.data4[6] == FSP_GUID_DATA4_6 && ++ ((struct ffs_file_header *)fsp)->name.data4[7] == FSP_GUID_DATA4_7) { ++ /* Add the FFS header size to find the raw section header */ ++ fsp += sizeof(struct ffs_file_header); ++ } else { ++ fsp = 0; ++ } ++ ++ if (fsp && ++ ((struct raw_section *)fsp)->type == EFI_SECTION_RAW) { ++ /* Add the raw section header size to find the FSP header */ ++ fsp += sizeof(struct raw_section); ++ } else { ++ fsp = 0; ++ } ++ ++ return (u32)fsp; ++} ++ ++void fsp_continue(struct shared_data *shared_data, u32 status, void *hob_list) ++{ ++ u32 stack_len; ++ u32 stack_base; ++ u32 stack_top; ++ ++ post_code(POST_MRC); ++ ++ assert(status == 0); ++ ++ /* Get the migrated stack in normal memory */ ++ stack_base = (u32)fsp_get_bootloader_tmp_mem(hob_list, &stack_len); ++ assert(stack_base != 0); ++ stack_top = stack_base + stack_len - sizeof(u32); ++ ++ /* ++ * Old stack base is stored at the very end of the stack top, ++ * use it to calculate the migrated shared data base ++ */ ++ shared_data = (struct shared_data *)(stack_base + ++ ((u32)shared_data - *(u32 *)stack_top)); ++ ++ /* The boot loader main function entry */ ++ fsp_init_done(hob_list); ++} ++ ++void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf) ++{ ++ struct shared_data shared_data; ++ fsp_init_f init; ++ struct fsp_init_params params; ++ struct fspinit_rtbuf rt_buf; ++ struct vpd_region *fsp_vpd; ++ struct fsp_header *fsp_hdr; ++ struct fsp_init_params *params_ptr; ++ struct upd_region *fsp_upd; ++ ++ fsp_hdr = (struct fsp_header *)find_fsp_header(); ++ if (fsp_hdr == NULL) { ++ /* No valid FSP info header was found */ ++ panic("Invalid FSP header"); ++ } ++ ++ fsp_upd = (struct upd_region *)&shared_data.fsp_upd; ++ memset(&rt_buf, 0, sizeof(struct fspinit_rtbuf)); ++ ++ /* Reserve a gap in stack top */ ++ rt_buf.common.stack_top = (u32 *)stack_top - 32; ++ rt_buf.common.boot_mode = boot_mode; ++ rt_buf.common.upd_data = (struct upd_region *)fsp_upd; ++ ++ /* Get VPD region start */ ++ fsp_vpd = (struct vpd_region *)(fsp_hdr->img_base + ++ fsp_hdr->cfg_region_off); ++ ++ /* Verifify the VPD data region is valid */ ++ assert((fsp_vpd->img_rev == VPD_IMAGE_REV) && ++ (fsp_vpd->sign == VPD_IMAGE_ID)); ++ ++ /* Copy default data from Flash */ ++ memcpy(fsp_upd, (void *)(fsp_hdr->img_base + fsp_vpd->upd_offset), ++ sizeof(struct upd_region)); ++ ++ /* Verifify the UPD data region is valid */ ++ assert(fsp_upd->terminator == UPD_TERMINATOR); ++ ++ /* Override any UPD setting if required */ ++ update_fsp_upd(fsp_upd); ++ ++ memset(¶ms, 0, sizeof(struct fsp_init_params)); ++ params.nvs_buf = nvs_buf; ++ params.rt_buf = (struct fspinit_rtbuf *)&rt_buf; ++ params.continuation = (fsp_continuation_f)asm_continuation; ++ ++ init = (fsp_init_f)(fsp_hdr->img_base + fsp_hdr->fsp_init); ++ params_ptr = ¶ms; ++ ++ shared_data.fsp_hdr = fsp_hdr; ++ shared_data.stack_top = (u32 *)stack_top; ++ ++ post_code(POST_PRE_MRC); ++ ++ /* ++ * Use ASM code to ensure the register value in EAX & ECX ++ * will be passed into BlContinuationFunc ++ */ ++ asm volatile ( ++ "pushl %0;" ++ "call *%%eax;" ++ ".global asm_continuation;" ++ "asm_continuation:;" ++ "movl %%ebx, %%eax;" /* shared_data */ ++ "movl 4(%%esp), %%edx;" /* status */ ++ "movl 8(%%esp), %%ecx;" /* hob_list */ ++ "jmp fsp_continue;" ++ : : "m"(params_ptr), "a"(init), "b"(&shared_data) ++ ); ++ ++ /* ++ * Should never get here. ++ * Control will continue from fsp_continue. ++ * This line below is to prevent the compiler from optimizing ++ * structure intialization. ++ * ++ * DO NOT REMOVE! ++ */ ++ init(¶ms); ++} ++ ++u32 fsp_notify(struct fsp_header *fsp_hdr, u32 phase) ++{ ++ fsp_notify_f notify; ++ struct fsp_notify_params params; ++ struct fsp_notify_params *params_ptr; ++ u32 status; ++ ++ if (!fsp_hdr) ++ fsp_hdr = (struct fsp_header *)find_fsp_header(); ++ ++ if (fsp_hdr == NULL) { ++ /* No valid FSP info header */ ++ panic("Invalid FSP header"); ++ } ++ ++ notify = (fsp_notify_f)(fsp_hdr->img_base + fsp_hdr->fsp_notify); ++ params.phase = phase; ++ params_ptr = ¶ms; ++ ++ /* ++ * Use ASM code to ensure correct parameter is on the stack for ++ * FspNotify as U-Boot is using different ABI from FSP ++ */ ++ asm volatile ( ++ "pushl %1;" /* push notify phase */ ++ "call *%%eax;" /* call FspNotify */ ++ "addl $4, %%esp;" /* clean up the stack */ ++ : "=a"(status) : "m"(params_ptr), "a"(notify), "m"(*params_ptr) ++ ); ++ ++ return status; ++} ++ ++u32 fsp_get_usable_lowmem_top(const void *hob_list) ++{ ++ union hob_pointers hob; ++ phys_addr_t phys_start; ++ u32 top; ++ ++ /* Get the HOB list for processing */ ++ hob.raw = (void *)hob_list; ++ ++ /* * Collect memory ranges */ ++ top = FSP_LOWMEM_BASE; ++ while (!end_of_hob(hob)) { ++ if (get_hob_type(hob) == HOB_TYPE_RES_DESC) { ++ if (hob.res_desc->type == RES_SYS_MEM) { ++ phys_start = hob.res_desc->phys_start; ++ /* Need memory above 1MB to be collected here */ ++ if (phys_start >= FSP_LOWMEM_BASE && ++ phys_start < (phys_addr_t)FSP_HIGHMEM_BASE) ++ top += (u32)(hob.res_desc->len); ++ } ++ } ++ hob.raw = get_next_hob(hob); ++ } ++ ++ return top; ++} ++ ++u64 fsp_get_usable_highmem_top(const void *hob_list) ++{ ++ union hob_pointers hob; ++ phys_addr_t phys_start; ++ u64 top; ++ ++ /* Get the HOB list for processing */ ++ hob.raw = (void *)hob_list; ++ ++ /* Collect memory ranges */ ++ top = FSP_HIGHMEM_BASE; ++ while (!end_of_hob(hob)) { ++ if (get_hob_type(hob) == HOB_TYPE_RES_DESC) { ++ if (hob.res_desc->type == RES_SYS_MEM) { ++ phys_start = hob.res_desc->phys_start; ++ /* Need memory above 1MB to be collected here */ ++ if (phys_start >= (phys_addr_t)FSP_HIGHMEM_BASE) ++ top += (u32)(hob.res_desc->len); ++ } ++ } ++ hob.raw = get_next_hob(hob); ++ } ++ ++ return top; ++} ++ ++u64 fsp_get_reserved_mem_from_guid(const void *hob_list, u64 *len, ++ struct efi_guid *guid) ++{ ++ union hob_pointers hob; ++ ++ /* Get the HOB list for processing */ ++ hob.raw = (void *)hob_list; ++ ++ /* Collect memory ranges */ ++ while (!end_of_hob(hob)) { ++ if (get_hob_type(hob) == HOB_TYPE_RES_DESC) { ++ if (hob.res_desc->type == RES_MEM_RESERVED) { ++ if (compare_guid(&hob.res_desc->owner, guid)) { ++ if (len) ++ *len = (u32)(hob.res_desc->len); ++ ++ return (u64)(hob.res_desc->phys_start); ++ } ++ } ++ } ++ hob.raw = get_next_hob(hob); ++ } ++ ++ return 0; ++} ++ ++u32 fsp_get_fsp_reserved_mem(const void *hob_list, u32 *len) ++{ ++ const struct efi_guid guid = FSP_HOB_RESOURCE_OWNER_FSP_GUID; ++ u64 length; ++ u32 base; ++ ++ base = (u32)fsp_get_reserved_mem_from_guid(hob_list, ++ &length, (struct efi_guid *)&guid); ++ if ((len != 0) && (base != 0)) ++ *len = (u32)length; ++ ++ return base; ++} ++ ++u32 fsp_get_tseg_reserved_mem(const void *hob_list, u32 *len) ++{ ++ const struct efi_guid guid = FSP_HOB_RESOURCE_OWNER_TSEG_GUID; ++ u64 length; ++ u32 base; ++ ++ base = (u32)fsp_get_reserved_mem_from_guid(hob_list, ++ &length, (struct efi_guid *)&guid); ++ if ((len != 0) && (base != 0)) ++ *len = (u32)length; ++ ++ return base; ++} ++ ++void *fsp_get_next_hob(u16 type, const void *hob_list) ++{ ++ union hob_pointers hob; ++ ++ assert(hob_list != NULL); ++ ++ hob.raw = (u8 *)hob_list; ++ ++ /* Parse the HOB list until end of list or matching type is found */ ++ while (!end_of_hob(hob)) { ++ if (get_hob_type(hob) == type) ++ return hob.raw; ++ ++ hob.raw = get_next_hob(hob); ++ } ++ ++ return NULL; ++} ++ ++void *fsp_get_next_guid_hob(const struct efi_guid *guid, const void *hob_list) ++{ ++ union hob_pointers hob; ++ ++ hob.raw = (u8 *)hob_list; ++ while ((hob.raw = fsp_get_next_hob(HOB_TYPE_GUID_EXT, ++ hob.raw)) != NULL) { ++ if (compare_guid(guid, &hob.guid->name)) ++ break; ++ hob.raw = get_next_hob(hob); ++ } ++ ++ return hob.raw; ++} ++ ++void *fsp_get_guid_hob_data(const void *hob_list, u32 *len, ++ struct efi_guid *guid) ++{ ++ u8 *guid_hob; ++ ++ guid_hob = fsp_get_next_guid_hob(guid, hob_list); ++ if (guid_hob == NULL) { ++ return NULL; ++ } else { ++ if (len) ++ *len = get_guid_hob_data_size(guid_hob); ++ ++ return get_guid_hob_data(guid_hob); ++ } ++} ++ ++void *fsp_get_nvs_data(const void *hob_list, u32 *len) ++{ ++ const struct efi_guid guid = FSP_NON_VOLATILE_STORAGE_HOB_GUID; ++ ++ return fsp_get_guid_hob_data(hob_list, len, (struct efi_guid *)&guid); ++} ++ ++void *fsp_get_bootloader_tmp_mem(const void *hob_list, u32 *len) ++{ ++ const struct efi_guid guid = FSP_BOOTLOADER_TEMP_MEM_HOB_GUID; ++ ++ return fsp_get_guid_hob_data(hob_list, len, (struct efi_guid *)&guid); ++} +diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/Kconfig u-boot/arch/x86/cpu/queensbay/Kconfig +--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/cpu/queensbay/Kconfig 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,79 @@ ++# ++# Copyright (C) 2014, Bin Meng ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++config INTEL_QUEENSBAY ++ bool ++ select HAVE_FSP ++ select HAVE_CMC ++ ++if INTEL_QUEENSBAY ++ ++config HAVE_FSP ++ bool "Add an Firmware Support Package binary" ++ help ++ Select this option to add an Firmware Support Package binary to ++ the resulting U-Boot image. It is a binary blob which U-Boot uses ++ to set up SDRAM and other chipset specific initialization. ++ ++ Note: Without this binary U-Boot will not be able to set up its ++ SDRAM so will not boot. ++ ++config FSP_FILE ++ string "Firmware Support Package binary filename" ++ depends on HAVE_FSP ++ default "fsp.bin" ++ help ++ The filename of the file to use as Firmware Support Package binary ++ in the board directory. ++ ++config FSP_ADDR ++ hex "Firmware Support Package binary location" ++ depends on HAVE_FSP ++ default 0xfffc0000 ++ help ++ FSP is not Position Independent Code (PIC) and the whole FSP has to ++ be rebased if it is placed at a location which is different from the ++ perferred base address specified during the FSP build. Use Intel's ++ Binary Configuration Tool (BCT) to do the rebase. ++ ++ The default base address of 0xfffc0000 indicates that the binary must ++ be located at offset 0xc0000 from the beginning of a 1MB flash device. ++ ++config FSP_TEMP_RAM_ADDR ++ hex ++ default 0x2000000 ++ help ++ Stack top address which is used in FspInit after DRAM is ready and ++ CAR is disabled. ++ ++config HAVE_CMC ++ bool "Add a Chipset Micro Code state machine binary" ++ help ++ Select this option to add a Chipset Micro Code state machine binary ++ to the resulting U-Boot image. It is a 64K data block of machine ++ specific code which must be put in the flash for the processor to ++ access when powered up before system BIOS is executed. ++ ++config CMC_FILE ++ string "Chipset Micro Code state machine filename" ++ depends on HAVE_CMC ++ default "cmc.bin" ++ help ++ The filename of the file to use as Chipset Micro Code state machine ++ binary in the board directory. ++ ++config CMC_ADDR ++ hex "Chipset Micro Code state machine binary location" ++ depends on HAVE_CMC ++ default 0xfffb0000 ++ help ++ The location of the CMC binary is determined by a strap. It must be ++ put in flash at a location matching the strap-determined base address. ++ ++ The default base address of 0xfffb0000 indicates that the binary must ++ be located at offset 0xb0000 from the beginning of a 1MB flash device. ++ ++endif +diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/Makefile u-boot/arch/x86/cpu/queensbay/Makefile +--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/cpu/queensbay/Makefile 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,9 @@ ++# ++# Copyright (C) 2014, Bin Meng ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++obj-y += tnc_car.o tnc_dram.o tnc.o topcliff.o ++obj-y += fsp_configs.o fsp_support.o ++obj-$(CONFIG_PCI) += tnc_pci.o +diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc.c u-boot/arch/x86/cpu/queensbay/tnc.c +--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/cpu/queensbay/tnc.c 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,72 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static void unprotect_spi_flash(void) ++{ ++ u32 bc; ++ ++ bc = pci_read_config32(PCH_LPC_DEV, 0xd8); ++ bc |= 0x1; /* unprotect the flash */ ++ pci_write_config32(PCH_LPC_DEV, 0xd8, bc); ++} ++ ++int arch_cpu_init(void) ++{ ++ struct pci_controller *hose; ++ int ret; ++ ++ post_code(POST_CPU_INIT); ++#ifdef CONFIG_SYS_X86_TSC_TIMER ++ timer_set_base(rdtsc()); ++#endif ++ ++ ret = x86_cpu_init_f(); ++ if (ret) ++ return ret; ++ ++ ret = pci_early_init_hose(&hose); ++ if (ret) ++ return ret; ++ ++ unprotect_spi_flash(); ++ ++ return 0; ++} ++ ++int print_cpuinfo(void) ++{ ++ post_code(POST_CPU_INFO); ++ return default_print_cpuinfo(); ++} ++ ++void reset_cpu(ulong addr) ++{ ++ /* cold reset */ ++ outb(0x06, PORT_RESET); ++} ++ ++void board_final_cleanup(void) ++{ ++ u32 status; ++ ++ /* call into FspNotify */ ++ debug("Calling into FSP (notify phase INIT_PHASE_BOOT): "); ++ status = fsp_notify(NULL, INIT_PHASE_BOOT); ++ if (status != FSP_SUCCESS) ++ debug("fail, error code %x\n", status); ++ else ++ debug("OK\n"); ++ ++ return; ++} +diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_car.S u-boot/arch/x86/cpu/queensbay/tnc_car.S +--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_car.S 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/cpu/queensbay/tnc_car.S 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,124 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++ ++.globl car_init ++car_init: ++ /* ++ * Note: ebp holds the BIST value (built-in self test) so far, but ebp ++ * will be destroyed through the FSP call, thus we have to test the ++ * BIST value here before we call into FSP. ++ */ ++ test %ebp, %ebp ++ jz car_init_start ++ post_code(POST_BIST_FAILURE) ++ jmp die ++ ++car_init_start: ++ post_code(POST_CAR_START) ++ lea find_fsp_header_romstack, %esp ++ jmp find_fsp_header ++ ++find_fsp_header_ret: ++ /* EAX points to FSP_INFO_HEADER */ ++ mov %eax, %ebp ++ ++ /* sanity test */ ++ cmp $CONFIG_FSP_ADDR, %eax ++ jb die ++ ++ /* calculate TempRamInitEntry address */ ++ mov 0x30(%ebp), %eax ++ add 0x1c(%ebp), %eax ++ ++ /* call FSP TempRamInitEntry to setup temporary stack */ ++ lea temp_ram_init_romstack, %esp ++ jmp *%eax ++ ++temp_ram_init_ret: ++ addl $4, %esp ++ cmp $0, %eax ++ jnz car_init_fail ++ ++ post_code(POST_CAR_CPU_CACHE) ++ ++ /* ++ * The FSP TempRamInit initializes the ecx and edx registers to ++ * point to a temporary but writable memory range (Cache-As-RAM). ++ * ecx: the start of this temporary memory range, ++ * edx: the end of this range. ++ */ ++ ++ /* stack grows down from top of CAR */ ++ movl %edx, %esp ++ ++ /* ++ * TODO: ++ * ++ * According to FSP architecture spec, the fsp_init() will not return ++ * to its caller, instead it requires the bootloader to provide a ++ * so-called continuation function to pass into the FSP as a parameter ++ * of fsp_init, and fsp_init() will call that continuation function ++ * directly. ++ * ++ * The call to fsp_init() may need to be moved out of the car_init() ++ * to cpu_init_f() with the help of some inline assembly codes. ++ * Note there is another issue that fsp_init() will setup another stack ++ * using the fsp_init parameter stack_top after DRAM is initialized, ++ * which means any data on the previous stack (on the CAR) gets lost ++ * (ie: U-Boot global_data). FSP is supposed to support such scenario, ++ * however it does not work. This should be revisited in the future. ++ */ ++ movl $CONFIG_FSP_TEMP_RAM_ADDR, %eax ++ xorl %edx, %edx ++ xorl %ecx, %ecx ++ call fsp_init ++ ++.global fsp_init_done ++fsp_init_done: ++ /* ++ * We come here from FspInit with eax pointing to the HOB list. ++ * Save eax to esi temporarily. ++ */ ++ movl %eax, %esi ++ /* ++ * Re-initialize the ebp (BIST) to zero, as we already reach here ++ * which means we passed BIST testing before. ++ */ ++ xorl %ebp, %ebp ++ jmp car_init_ret ++ ++car_init_fail: ++ post_code(POST_CAR_FAILURE) ++ ++die: ++ hlt ++ jmp die ++ hlt ++ ++ /* ++ * The function call before CAR initialization is tricky. It cannot ++ * be called using the 'call' instruction but only the 'jmp' with ++ * the help of a handcrafted stack in the ROM. The stack needs to ++ * contain the function return address as well as the parameters. ++ */ ++ .balign 4 ++find_fsp_header_romstack: ++ .long find_fsp_header_ret ++ ++ .balign 4 ++temp_ram_init_romstack: ++ .long temp_ram_init_ret ++ .long temp_ram_init_params ++temp_ram_init_params: ++_dt_ucode_base_size: ++ /* These next two fields are filled in by ifdtool */ ++ .long 0 /* microcode base */ ++ .long 0 /* microcode size */ ++ .long CONFIG_SYS_MONITOR_BASE /* code region base */ ++ .long CONFIG_SYS_MONITOR_LEN /* code region size */ +diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_dram.c u-boot/arch/x86/cpu/queensbay/tnc_dram.c +--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_dram.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/cpu/queensbay/tnc_dram.c 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,78 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++int dram_init(void) ++{ ++ phys_size_t ram_size = 0; ++ union hob_pointers hob; ++ ++ hob.raw = gd->arch.hob_list; ++ while (!end_of_hob(hob)) { ++ if (get_hob_type(hob) == HOB_TYPE_RES_DESC) { ++ if (hob.res_desc->type == RES_SYS_MEM || ++ hob.res_desc->type == RES_MEM_RESERVED) { ++ ram_size += hob.res_desc->len; ++ } ++ } ++ hob.raw = get_next_hob(hob); ++ } ++ ++ gd->ram_size = ram_size; ++ post_code(POST_DRAM); ++ ++ return 0; ++} ++ ++void dram_init_banksize(void) ++{ ++ gd->bd->bi_dram[0].start = 0; ++ gd->bd->bi_dram[0].size = gd->ram_size; ++} ++ ++/* ++ * This function looks for the highest region of memory lower than 4GB which ++ * has enough space for U-Boot where U-Boot is aligned on a page boundary. ++ * It overrides the default implementation found elsewhere which simply ++ * picks the end of ram, wherever that may be. The location of the stack, ++ * the relocation address, and how far U-Boot is moved by relocation are ++ * set in the global data structure. ++ */ ++ulong board_get_usable_ram_top(ulong total_size) ++{ ++ return fsp_get_usable_lowmem_top(gd->arch.hob_list); ++} ++ ++unsigned install_e820_map(unsigned max_entries, struct e820entry *entries) ++{ ++ unsigned num_entries = 0; ++ ++ union hob_pointers hob; ++ ++ hob.raw = gd->arch.hob_list; ++ ++ while (!end_of_hob(hob)) { ++ if (get_hob_type(hob) == HOB_TYPE_RES_DESC) { ++ entries[num_entries].addr = hob.res_desc->phys_start; ++ entries[num_entries].size = hob.res_desc->len; ++ ++ if (hob.res_desc->type == RES_SYS_MEM) ++ entries[num_entries].type = E820_RAM; ++ else if (hob.res_desc->type == RES_MEM_RESERVED) ++ entries[num_entries].type = E820_RESERVED; ++ } ++ hob.raw = get_next_hob(hob); ++ num_entries++; ++ } ++ ++ return num_entries; ++} +diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_pci.c u-boot/arch/x86/cpu/queensbay/tnc_pci.c +--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/cpu/queensbay/tnc_pci.c 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,61 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++void board_pci_setup_hose(struct pci_controller *hose) ++{ ++ hose->first_busno = 0; ++ hose->last_busno = 0; ++ ++ /* PCI memory space */ ++ pci_set_region(hose->regions + 0, ++ CONFIG_PCI_MEM_BUS, ++ CONFIG_PCI_MEM_PHYS, ++ CONFIG_PCI_MEM_SIZE, ++ PCI_REGION_MEM); ++ ++ /* PCI IO space */ ++ pci_set_region(hose->regions + 1, ++ CONFIG_PCI_IO_BUS, ++ CONFIG_PCI_IO_PHYS, ++ CONFIG_PCI_IO_SIZE, ++ PCI_REGION_IO); ++ ++ pci_set_region(hose->regions + 2, ++ CONFIG_PCI_PREF_BUS, ++ CONFIG_PCI_PREF_PHYS, ++ CONFIG_PCI_PREF_SIZE, ++ PCI_REGION_PREFETCH); ++ ++ pci_set_region(hose->regions + 3, ++ 0, ++ 0, ++ gd->ram_size, ++ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); ++ ++ hose->region_count = 4; ++} ++ ++int board_pci_post_scan(struct pci_controller *hose) ++{ ++ u32 status; ++ ++ /* call into FspNotify */ ++ debug("Calling into FSP (notify phase INIT_PHASE_PCI): "); ++ status = fsp_notify(NULL, INIT_PHASE_PCI); ++ if (status != FSP_SUCCESS) ++ debug("fail, error code %x\n", status); ++ else ++ debug("OK\n"); ++ ++ return 0; ++} +diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/topcliff.c u-boot/arch/x86/cpu/queensbay/topcliff.c +--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/topcliff.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/cpu/queensbay/topcliff.c 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,47 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static struct pci_device_id mmc_supported[] = { ++ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SDIO_0 }, ++ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SDIO_1 }, ++ { } ++}; ++ ++int cpu_mmc_init(bd_t *bis) ++{ ++ struct sdhci_host *mmc_host; ++ pci_dev_t devbusfn; ++ u32 iobase; ++ int ret; ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(mmc_supported); i++) { ++ devbusfn = pci_find_devices(mmc_supported, i); ++ if (devbusfn == -1) ++ return -ENODEV; ++ ++ mmc_host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host)); ++ if (!mmc_host) ++ return -ENOMEM; ++ ++ mmc_host->name = "Topcliff SDHCI"; ++ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &iobase); ++ mmc_host->ioaddr = (void *)iobase; ++ mmc_host->quirks = 0; ++ ret = add_sdhci(mmc_host, 0, 0); ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} +diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/start.S u-boot/arch/x86/cpu/start.S +--- u-boot-2015.01-rc3/arch/x86/cpu/start.S 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/cpu/start.S 2015-01-01 17:34:32.253503252 +0100 +@@ -1,5 +1,5 @@ + /* +- * U-boot - x86 Startup Code ++ * U-Boot - x86 Startup Code + * + * (C) Copyright 2008-2011 + * Graeme Russ, +@@ -17,6 +17,7 @@ + #include + #include + #include ++#include + + .section .text + .code32 +@@ -74,6 +75,7 @@ + jmp car_init + .globl car_init_ret + car_init_ret: ++#ifndef CONFIG_HAVE_FSP + /* + * We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM, + * or fully initialised SDRAM - we really don't care which) +@@ -94,6 +96,12 @@ + #ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE + subl $CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %esp + #endif ++#else ++ /* ++ * When we get here after car_init, esp points to a temporary stack ++ * and esi holds the HOB list address returned by the FSP. ++ */ ++#endif + + /* Reserve space on stack for global data */ + subl $GENERATED_GBL_DATA_SIZE, %esp +@@ -108,6 +116,13 @@ + movl %esp, %edi + rep stosb + ++#ifdef CONFIG_HAVE_FSP ++ /* Store HOB list */ ++ movl %esp, %edx ++ addl $GD_HOB_LIST, %edx ++ movl %esi, (%edx) ++#endif ++ + /* Setup first parameter to setup_gdt, pointer to global_data */ + movl %esp, %eax + +diff -ruN u-boot-2015.01-rc3/arch/x86/dts/chromebook_link.dts u-boot/arch/x86/dts/chromebook_link.dts +--- u-boot-2015.01-rc3/arch/x86/dts/chromebook_link.dts 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/dts/chromebook_link.dts 2015-01-01 17:34:32.253503252 +0100 +@@ -214,10 +214,10 @@ + + microcode { + update@0 { +-#include "m12206a7_00000028.dtsi" ++#include "microcode/m12206a7_00000029.dtsi" + }; + update@1 { +-#include "m12306a9_00000017.dtsi" ++#include "microcode/m12306a9_0000001b.dtsi" + }; + }; + +diff -ruN u-boot-2015.01-rc3/arch/x86/dts/coreboot.dtsi u-boot/arch/x86/dts/coreboot.dtsi +--- u-boot-2015.01-rc3/arch/x86/dts/coreboot.dtsi 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/dts/coreboot.dtsi 2015-01-01 17:34:32.253503252 +0100 +@@ -6,7 +6,7 @@ + }; + + serial { +- compatible = "coreboot-uart"; ++ compatible = "x86-uart"; + reg = <0x3f8 0x10>; + reg-shift = <0>; + io-mapped = <1>; +diff -ruN u-boot-2015.01-rc3/arch/x86/dts/crownbay.dts u-boot/arch/x86/dts/crownbay.dts +--- u-boot-2015.01-rc3/arch/x86/dts/crownbay.dts 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/dts/crownbay.dts 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,60 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++/dts-v1/; ++ ++/include/ "coreboot.dtsi" ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "Intel Crown Bay"; ++ compatible = "intel,crownbay", "intel,queensbay"; ++ ++ config { ++ silent_console = <0>; ++ }; ++ ++ gpioa { ++ compatible = "intel,ich6-gpio"; ++ u-boot,dm-pre-reloc; ++ reg = <0 0x20>; ++ bank-name = "A"; ++ }; ++ ++ gpiob { ++ compatible = "intel,ich6-gpio"; ++ u-boot,dm-pre-reloc; ++ reg = <0x20 0x20>; ++ bank-name = "B"; ++ }; ++ ++ serial { ++ reg = <0x3f8 8>; ++ clock-frequency = <115200>; ++ }; ++ ++ chosen { }; ++ memory { device_type = "memory"; reg = <0 0>; }; ++ ++ spi { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "intel,ich7"; ++ spi-flash@0 { ++ reg = <0>; ++ compatible = "sst,25vf016b", "spi-flash"; ++ memory-map = <0xffe00000 0x00200000>; ++ }; ++ }; ++ ++ microcode { ++ update@0 { ++#include "microcode/m0220661105_cv.dtsi" ++ }; ++ }; ++ ++}; +diff -ruN u-boot-2015.01-rc3/arch/x86/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/arch/x86/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h +diff -ruN u-boot-2015.01-rc3/arch/x86/dts/include/dt-bindings/reset/altr,rst-mgr.h u-boot/arch/x86/dts/include/dt-bindings/reset/altr,rst-mgr.h +diff -ruN u-boot-2015.01-rc3/arch/x86/dts/link.dts u-boot/arch/x86/dts/link.dts +--- u-boot-2015.01-rc3/arch/x86/dts/link.dts 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/dts/link.dts 2015-01-01 17:34:32.253503252 +0100 +@@ -214,10 +214,10 @@ + + microcode { + update@0 { +-#include "m12206a7_00000028.dtsi" ++#include "microcode/m12206a7_00000029.dtsi" + }; + update@1 { +-#include "m12306a9_00000017.dtsi" ++#include "microcode/m12306a9_0000001b.dtsi" + }; + }; + +diff -ruN u-boot-2015.01-rc3/arch/x86/dts/m12206a7_00000028.dtsi u-boot/arch/x86/dts/m12206a7_00000028.dtsi +--- u-boot-2015.01-rc3/arch/x86/dts/m12206a7_00000028.dtsi 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/dts/m12206a7_00000028.dtsi 1970-01-01 01:00:00.000000000 +0100 +@@ -1,622 +0,0 @@ +-/* +- * Copyright (c) <1995-2013>, Intel Corporation. +- * All rights reserved. +- * +- * Redistribution. Redistribution and use in binary form, without modification, are +- * permitted provided that the following conditions are met: +- * .Redistributions must reproduce the above copyright notice and the following +- * disclaimer in the documentation and/or other materials provided with the +- * distribution. +- * Neither the name of Intel Corporation nor the names of its suppliers may be used +- * to endorse or promote products derived from this software without specific prior +- * written permission. +- * .No reverse engineering, decompilation, or disassembly of this software is +- * permitted. +- * ."Binary form" includes any format commonly used for electronic conveyance +- * which is a reversible, bit-exact translation of binary representation to ASCII or +- * ISO text, for example, "uuencode." +- * +- * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT +- * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED +- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER +- * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +- * +- *--- +- * This is a device tree fragment. Use #include to add these properties to a +- * node. +- */ +- +-compatible = "intel,microcode"; +-intel,header-version = <1>; +-intel,update-revision = <0x28>; +-intel,date-code = <0x04242012>; +-intel,processor-signature = <0x000206a7>; +-intel,checksum = <0xf3e9935d>; +-intel,loader-revision = <1>; +-intel,processor-flags = <0x12>; +- +-/* The 48-byte public header is omitted. */ +-data = < +- 0x00000000 0x000000a1 0x00020001 0x00000028 +- 0x00000000 0x00000000 0x20120423 0x000008f1 +- 0x00000001 0x000206a7 0x00000000 0x00000000 +- 0x00000000 0x00000000 0x00000000 0x00000000 +- 0x00000000 0x000008f1 0x00000000 0x00000000 +- 0x00000000 0x00000000 0x00000000 0x00000000 +- 0x52b813ac 0xdb8994c7 0x70e9f6bb 0x9d6db2ff +- 0xf4d70f5d 0x5b1eccf6 0xac59106f 0x0ae2e2c1 +- 0x1a7bbeb1 0x355a1d62 0x2e7eb594 0x09f8dea9 +- 0x432a49e4 0xbf520253 0xdafa4010 0x893a858a +- 0x766e0efb 0xd91e196d 0x838bd2ef 0xe5146494 +- 0xd515f413 0x29704828 0xe85598b6 0xdcbe6c51 +- 0x88eabbfa 0xa1e8909f 0xd8931721 0x35386554 +- 0x089a78a7 0xd9914775 0xd4644748 0x1556a4dc +- 0xf44448f6 0xd054d7db 0xf30f2b7d 0x5ae223d0 +- 0xcbbb48b0 0x5c8b0383 0x177de157 0x9c1e5f73 +- 0x2ec28289 0xd72a7b6c 0x823b6eb2 0x35e02171 +- 0xba8deae4 0x06f4d468 0x13dbafaa 0x72b419f1 +- 0x033385b5 0x05806920 0x4c6034cf 0x9bd117dc +- 0x976e2d04 0x250330f0 0x7250b5e1 0x184980c2 +- 0x12a9d7d6 0x1bc808f9 0xae79994f 0xc6f87901 +- 0xc0e3132f 0x671491c5 0x236cad39 0x37889d9c +- 0x67f7c3f3 0x964a6be5 0xbcced7da 0x57eeaa6e +- 0x7bca1522 0x654fee4c 0x2a1ca5d9 0xa1803cf3 +- 0x00000011 0x8c316d2c 0x17603b7e 0x32e42981 +- 0xc26c1400 0xf0fbccb6 0xeab6b43a 0x11d456a5 +- 0x5b912d46 0x15195fe0 0x542f6db3 0x0b7f212e +- 0x47718dd9 0x7c41b108 0x06c21111 0x4445d5ea +- 0xb4fb8128 0xe07404a6 0x8d503da4 0x78fc7e44 +- 0xb9919656 0x9968c797 0x87f26ab0 0x23bb1af7 +- 0x1ec5d761 0x26f30d2c 0x7cdb747c 0xe4d42033 +- 0x8a5d4801 0x768aff57 0xbcfd5d11 0x7c853c2d +- 0x231e6207 0x8b1988a6 0xd68fdb75 0x58dcb417 +- 0x44422ef9 0x2a186ebb 0x7d27e85f 0x36ac31f7 +- 0x1e487e77 0x2b0b8c37 0xd8ba682f 0x2cba791b +- 0xe6d3dece 0x1b2c2a99 0x4e5decab 0xfbd313a3 +- 0xdbc78294 0x5a80cce7 0x2d8e0f0b 0xcf564f71 +- 0x073d1f37 0x25162870 0x96cdb85b 0x9c553048 +- 0x24eba740 0xfc0f352e 0x0c83be68 0x89b5076c +- 0xc39c4355 0x6a4cf25c 0x2bbd2682 0xc524fdb9 +- 0x7ea19bae 0x191ad6f1 0xd3fbf3bf 0x21bf77fa +- 0x8f77fec4 0x0f90f635 0xe55e165c 0x868d58c0 +- 0x966bc0ad 0x6c276364 0x9d8f7eff 0x4b7925d4 +- 0x8b2f9326 0x4ab7b47e 0x33a9087c 0xf31ab949 +- 0x69831dfb 0x4711a215 0x8128c1fa 0x8481c213 +- 0x7401b01b 0xfdcfdc50 0xd6b55266 0xae9b23ac +- 0xfa2ad275 0xa225bb45 0x4dd720c4 0x760a20e6 +- 0x5f1223c9 0x2f334372 0x6e1dcdab 0xe8ee8638 +- 0x1c19ba8a 0xef9341c4 0x360aaa9d 0x90452ea9 +- 0x65852446 0xe9398fa3 0xbba6a631 0x1a3e90b9 +- 0xe2a73a56 0x6e8c0747 0x35c7c53d 0xcc1ac842 +- 0x183356af 0xb6e98608 0x987b43c2 0xa8a3cfd2 +- 0xc2c5fce0 0xcc3af64a 0xd6d3a291 0xe59ad1f5 +- 0x124ca513 0x9522b50a 0x25150477 0xa2eb5797 +- 0x7fc63626 0x648c48e3 0x9f5797ff 0x2307b84d +- 0x980625a4 0xabc05983 0x24980807 0x773c4f99 +- 0x3407b872 0x07c3657a 0xa2cd9e48 0x49c1e6a8 +- 0xa881b84c 0xf804d72c 0xb5319d2a 0x3e39780f +- 0x97518822 0x0acd54c2 0x0721a9ff 0x10e1d2fd +- 0xa7b6db77 0x845b1a56 0xef00160e 0x6b41bfd5 +- 0xc994df0d 0xcf44a5ca 0x794b36a4 0xf9fdb127 +- 0x922a1366 0x822aa8a9 0x4b137bd5 0x5722a49f +- 0x8933719a 0x17edc1a9 0x079d9538 0x21fae7d5 +- 0xe534fd73 0x9d3038d5 0x48c3a056 0x5b22d58a +- 0x6f142866 0xf1d767cd 0xb51ad5a6 0x34a0ef85 +- 0x0111703e 0xca4b3a30 0xa0f3c34d 0x9d48775a +- 0x3f2059f9 0xf2fe2c36 0x588861a9 0xed5bd9fe +- 0x8231f7cb 0x8c115969 0x3f82ba00 0x21b3730c +- 0xba757997 0x3ec0bb2c 0x16f11def 0x5d4356c6 +- 0xdc2e0bc2 0x58c1eb6e 0x313ede0c 0xb68fcc52 +- 0x84d3e1b5 0xcc6d9201 0x95046196 0x276b527b +- 0x80a4a729 0xe782916d 0x5cf09e0b 0x98aaf9fa +- 0x1de6dd43 0xab4f1962 0x49ece734 0x81455488 +- 0xc2597b61 0x5b22af85 0x646f7b94 0x09213a1f +- 0x08edf7e4 0x963d343c 0x059ba888 0xb4e804ed +- 0xe7cc826c 0xf87bafc7 0xeecaec10 0x8e60919c +- 0xbf14c996 0xd3dcaee3 0xb8fa0b7e 0x81563c6e +- 0x7f59a258 0x2f344446 0x374d8aa6 0x9b6de5c9 +- 0xbf992857 0xbc5b94fc 0x28adb080 0x17e41044 +- 0xb87b469e 0xda504d12 0xf21bef8b 0xce75c1e3 +- 0xdbd92c83 0x58bba0af 0x77b42977 0x506cfd75 +- 0x1139e875 0x6ce5fe43 0xc6a5d7b3 0x87f9e628 +- 0x7b5c500b 0x130066b3 0x789b611f 0xec8c1ba9 +- 0xb7e6872d 0xaf828cd6 0xc28d3316 0x2a91f6d0 +- 0xc725f063 0x065ac531 0x4f9ef4b8 0x2b9d927e +- 0xaf54f3f9 0x7c924f72 0xda1d77ad 0xff00db67 +- 0xaf4f03c0 0xb4f4ee64 0x169e64e5 0x04653ac0 +- 0xed51cb70 0xfeaff0e5 0x51dbf346 0x072a2407 +- 0x23fb74f4 0x9a906eef 0x5d6fc3f0 0xbc3c374c +- 0x1cf9f063 0x919015d9 0x5b3e9d07 0xd6209d8b +- 0xa3710b3d 0x90ad23b8 0x420ceedc 0x58e8371f +- 0x5d419d1f 0xb8acd13f 0x7d100d6d 0x210c10d1 +- 0xcd0a697e 0x5023db4b 0x33e6d8e7 0x44bbe6b4 +- 0x827e859f 0x6ca4cc81 0x661bb2c3 0x71209ee8 +- 0xb8c3ffaf 0xd1075f51 0xba1eae10 0x728b0a6a +- 0xe4af7a2f 0xca9bcf2e 0xb249a631 0xdce6be47 +- 0x5c910321 0x425c3c27 0x33083e43 0xdea067ae +- 0xea594a23 0x41b75c2c 0x3a401a95 0xd33cd88a +- 0xc295cad0 0x67f48045 0x1dc9ad4c 0x4bc48864 +- 0x53991b6e 0x7aadde5f 0x2b0bf775 0x06ba5380 +- 0x9eb874be 0x2c4b967a 0x1bcc342f 0xe875001b +- 0x15b5642d 0x5be99c9d 0xcb210ace 0x1b4924ad +- 0x3793ed81 0x8b983114 0x3ec33981 0x75ec71e7 +- 0x8b5b7df3 0x834756f4 0x100fad01 0x70037fdf +- 0x0cef9a36 0x3d9e3a2d 0x38b48efd 0xfc4034b6 +- 0xa32e29dd 0x388944bc 0xc1c15614 0x3877e9c7 +- 0xa5e733fa 0xa621bd53 0x4b651df6 0xce082970 +- 0x85f30d6f 0x729a5c87 0x31dd7ba9 0xdb495828 +- 0x7b12c698 0x953495c9 0x6b5f99e7 0x2cc42fa8 +- 0x697ac512 0x1be679de 0xc116d305 0x94a36606 +- 0x9e5e141e 0x874affed 0x58d40b0b 0x5e3cf5e5 +- 0x5d05e9a9 0x06840efc 0xd2f98b21 0xa1e83ab2 +- 0x4f726202 0xa6394535 0x62a02403 0x9f2167ec +- 0x4f9fc77b 0x98073be4 0x2bc781fa 0xfc8e4c89 +- 0xc7179b97 0x692cf793 0x708ff7bb 0x12ecba93 +- 0xacd06e21 0x202bef76 0x03852241 0xe84e02a1 +- 0xf1f9ac8d 0xcee61aef 0x61a4f235 0xd22991eb +- 0x67a81345 0x375a15c6 0xe8fae8a3 0xb4ff2b37 +- 0x339ee4ea 0x14ffadc3 0xf49340dd 0xf285e568 +- 0x00fc6970 0x369c52d1 0x4f55368f 0x3f4d75f1 +- 0x6a73b603 0x963c1f59 0x171e2bdc 0x72bac76b +- 0x9e2e5c32 0x307f7c3f 0xd3b48637 0x3a917acf +- 0xea52a65f 0xecd209fb 0xf0ad84bf 0xd4bdea70 +- 0xa2647b38 0xce040b49 0xc6d5f13d 0x5d942c52 +- 0xf8edc042 0x798fdefd 0x4b074246 0x1cb1873a +- 0x6793c186 0x23b9c774 0x77bb0202 0xc519b3aa +- 0xa30c09a2 0xe1f6669a 0xb7eddb8d 0x7aaa91d6 +- 0x076a3789 0x0ac47791 0x1e503404 0x44fe8c54 +- 0xf3cbbf49 0xd3234eef 0x0d898b3f 0xe854984b +- 0xe3986de9 0x923a5c76 0x2ee9abca 0x1a9fedbe +- 0xdf76dcd1 0xea07936b 0xcdaaf247 0xe62d98fa +- 0xa99c7f7b 0x34fc84d4 0x03a35111 0xad5675c8 +- 0xcc64075b 0x408203f9 0x846e1f08 0xe934019e +- 0x423d1223 0x2f04f9e3 0xee1dbf40 0x65edc60f +- 0x097aa22f 0x7058a2b7 0x41c8a0a5 0xa68aa391 +- 0x0f345c40 0x667517e6 0x860838ba 0x6dae933b +- 0x764d5919 0x6673fa0f 0xf0a5e97d 0x4262ebbe +- 0x64b413f2 0xd2c4145a 0x0b2c11f3 0xfdfe9f93 +- 0x96c77107 0x1399fdda 0xf599f215 0xb504da5d +- 0xf8a95268 0x9ed1ef87 0x9ae33cfb 0x3b21f1ef +- 0xc6d447c2 0xe0694d4e 0x967febab 0xc13f631d +- 0x8393bfba 0x37438788 0x1724194d 0x8e77a045 +- 0x20e2483c 0xb961c2fc 0x485cf593 0xb3462621 +- 0xcb2959b8 0x10307e19 0xf71fbbfd 0xdda641e1 +- 0x0daf5f66 0x56d85178 0x145f6749 0xebc46ed1 +- 0x5593c249 0x94561f51 0x534cc654 0xca7c8814 +- 0xb59a578c 0x40b2b614 0xeaf3437a 0x198d5b4e +- 0xf245fa53 0xfb75e0b0 0xa363c46d 0xc43b5468 +- 0xdf036413 0xc59f5a36 0xd8ff4381 0xa3af3e36 +- 0x7af63462 0x414526d7 0x7bdc41c5 0xa416f1e7 +- 0x6987d9ad 0x472c5499 0x4f10ee37 0x47bb7ff7 +- 0xc7f2e621 0x820008f7 0x33a475db 0x91ff5d72 +- 0x0517401c 0x73d067c8 0xe417b69d 0xb86d9903 +- 0x1ac9a032 0x74bbf582 0x8b65596e 0x883be34c +- 0x95dcc26f 0xe232c646 0xfae9c19f 0x35cb5273 +- 0x6a94d095 0xfff6ca91 0xb9c40eb5 0xd351dcac +- 0xc90d464f 0x9b609642 0x15663b56 0x15f7f88d +- 0x22499f60 0x417fd6c5 0x2dc36fe2 0x712bf66a +- 0x22f1fba8 0x531b8092 0x40d269b6 0x1d227898 +- 0xeb6ff35b 0x2490ac31 0xc958ed65 0x3ce6ffb7 +- 0x9338a806 0x3beadfe2 0x1c361ac9 0x53d0e3b0 +- 0x91d46102 0x4d57045f 0xb5c8afb3 0xfd2c9e7d +- 0x3d578410 0x2adb9406 0x10df7459 0x90abccfb +- 0xe3f217ed 0xef5f4e09 0x74925ce4 0x169b5879 +- 0xfeff4ad5 0xb300dd1d 0xc96022ba 0x72da501b +- 0x1e694296 0x9efa33cb 0x0dc3ee6c 0x0ac4e7ea +- 0x73041130 0xf0e6a295 0xc46bdb6a 0x6a927044 +- 0xd217ceca 0x0b744007 0xd5a2bafb 0x4220cd92 +- 0x70d3352a 0x5ee4f661 0xfa07e5c0 0x155542d9 +- 0x4a39fba0 0xcec0552d 0x30c1d8ef 0xbef9d21e +- 0x183879aa 0x5b3f30a8 0x54a06db4 0xef876e4e +- 0x5e823680 0x53e2a353 0xc9aa4112 0x13a56ee5 +- 0x848859fd 0x0ba2b801 0xec15260f 0x7bb22672 +- 0x1a097332 0xb141339f 0x752a67d9 0xdae373f3 +- 0x3c8cfd49 0x2dfaf2a9 0x95820c6c 0x956b39a2 +- 0x1ca0d24e 0x1312b978 0x7280e1bd 0xa7a7c2ff +- 0x0b48e987 0xb6083e55 0x4b4b82f4 0x9c6104ad +- 0xcb93beca 0xe1c34035 0x34de740d 0xbb151baa +- 0x71f5942f 0x1eaac228 0x0c68331b 0x3d2a1dd0 +- 0xe7a3d41a 0x7253acae 0xfd4de230 0x79988d80 +- 0x4468f19b 0xac4440fd 0x6e8a6ef3 0x5736adf8 +- 0xded67716 0x1f1d5a4b 0x96c5f451 0x85bae181 +- 0x1293ab28 0xc2ba53c2 0x729ff4cf 0x60218df8 +- 0xc2870138 0x6127d844 0x89604e9e 0xd2b9ad4e +- 0x4f6ded9f 0xdd263849 0x1633bd92 0x64b03a24 +- 0x96dabd4d 0x6e85d235 0x1ab69ad0 0x9aa80454 +- 0x6b9041e0 0x106c7e9a 0x8f54812f 0xa274efe4 +- 0xe45d6695 0xf3aa7bd3 0x6a5a2a63 0xe36f3525 +- 0x6238fa4b 0x7d6cb06f 0x16d3b4a2 0xf3b04822 +- 0x638f1a60 0x0e1875fa 0x1c0292b9 0x6b519ea4 +- 0x9faba37b 0x209341ec 0x83c9061f 0x3387dfe8 +- 0xc7f12ceb 0x2bef45d7 0x8f8acb47 0x35d9741b +- 0x7009f514 0xfd003802 0x6f9489c5 0xe2ea2504 +- 0x910e996a 0xcc81d016 0x3280730d 0xdedfef59 +- 0x5a7357cc 0x8fe8dd39 0x15543fe5 0x976c4207 +- 0xe41cf62b 0x0ba6b4b5 0x5c3b7ced 0xa6c5b72b +- 0x72ad3b4d 0xff143181 0x2b78a157 0x7fe231a5 +- 0x6ff0538a 0xe58ed1ac 0x81a311a5 0xefaa54b8 +- 0xf04a797e 0xce6e69c7 0xdc810726 0x7bab7be3 +- 0xdd5923e8 0x5a2413ed 0x31cef794 0x73dfd806 +- 0x1b9223c1 0x0c370882 0x04fa3b68 0x87c50bc1 +- 0x1d78c90f 0xf4e2cee6 0xebea941b 0x73e5838f +- 0xca8d39a6 0xe004296b 0x28cf8a0e 0x7c73e7ef +- 0x26a296c2 0x789d4c72 0xd1490265 0xd9a9e843 +- 0xf03504c3 0xfae6dffb 0x7a48f00d 0x51e369c8 +- 0xcb3eeee6 0x0625e936 0xe93d0d7d 0xfb15ba6b +- 0xec5c76da 0x8fdf44f1 0xa036653a 0x5730c4a3 +- 0xe5bfe6dd 0x0b8c091f 0x3b51558c 0x403748f4 +- 0xf4007f86 0x952b5db6 0x5524d8ba 0x8046409a +- 0xe3fc61a9 0x66f4ea56 0x5645150b 0xdb2bec15 +- 0x50672218 0x7f40e87d 0x2b8359f8 0x438787dc +- 0x7f221597 0xf8b1590c 0x4f468251 0xff586d05 +- 0xb9195380 0x0ee09e0b 0x2fa7dbd9 0xd197b327 +- 0xa0dbad58 0xb485681f 0x5ef0937c 0x1e07ebb6 +- 0xcb49fe3f 0xc2427cd9 0x6c2c5298 0x4a2e171a +- 0xa7f333a8 0xb3609ad6 0x94e374d6 0x0e1eb64d +- 0x22c3367d 0xcdf89975 0x647aceef 0x16727c9c +- 0xf476ae53 0x35a1212e 0x0db768b8 0xfff8b53d +- 0xbd4fe45e 0xab28a5a3 0x59cec0af 0x28bcd1ef +- 0x6f43ad69 0x2658a059 0x27aee0ec 0x4e8bbd15 +- 0xa9fdcf04 0xc9aa329f 0x687f010f 0x5c968a07 +- 0xb894e607 0x0e1cba22 0x2f00f203 0xe8e133ac +- 0x494a4746 0xe8bdff9a 0xf69791a2 0x64179ce2 +- 0xbfd10dc6 0xc026f6d8 0x4871923a 0x8946b277 +- 0x609f49a4 0x6466df1b 0xd8c3c131 0x46ef0291 +- 0x0fdce8b6 0x2b9aedb7 0x225c4520 0x72b332cf +- 0x4e220d47 0xf2f69c36 0x2c23fad9 0x57a2a918 +- 0xe017409c 0x490819af 0xf2121afd 0x951ff7ff +- 0x40363fcf 0x5078b94e 0x9e4be775 0xee97ef16 +- 0xdb3a2390 0x17d42af9 0x96f56a51 0x1b4c2934 +- 0xc866315c 0x2b746f99 0x9a3b73f6 0xa1e081fc +- 0xa9d07ebd 0xa6359fae 0xdf50d099 0x55304e01 +- 0xfe5aaa81 0x1e74267d 0x38b1d2d7 0x8633e9af +- 0x99b013df 0x3aa05831 0x86279736 0xd2b464e0 +- 0xdf036a9f 0xe8162915 0x876c0d4f 0x4beb7d0e +- 0xfec9b170 0x46bc9df4 0x46cb88fa 0x0cb5904d +- 0x2e2961cf 0x7ea5dc1a 0x60670df2 0xf935ca32 +- 0x67e6777b 0x8bacc97a 0x5cd07248 0x32e483e6 +- 0xfdf09b0d 0xca57150b 0x3f432d09 0xdea2d7db +- 0x9f6a2954 0x6f07dff3 0x4133f394 0x60272f97 +- 0x1b98c9ec 0x2ab648d9 0xb5df14a8 0x0d2c38f2 +- 0x5dfde2c4 0x7cb43ca3 0x8d0c6c01 0xe80ea41e +- 0x5f58b71e 0x4ca9fef2 0xabd201a4 0x50905c08 +- 0xca8ba387 0x5592922b 0xfa4e05f5 0xceb64b14 +- 0x0845c5bd 0x518d369b 0x727e570c 0x1daaab31 +- 0x801e8b9c 0xec6568f3 0xd4c3760f 0x40a78d22 +- 0x38af58b5 0xc406a76e 0x8c3a7779 0x18272c42 +- 0x45cf7b70 0xa6f3c0f3 0x88021e41 0xda662504 +- 0xe97aa709 0xe93bafe0 0x8862ed5f 0x35bc8268 +- 0xf5a41551 0x3dd3bb21 0x1af0cf11 0x08fe1ad7 +- 0x53ecae41 0x01a4a8ae 0xfed636b7 0xf09323e6 +- 0x73b9b253 0x7ebd7ce2 0x7074b4de 0x21c719b2 +- 0x50982743 0xd23cfd27 0x136a1f4a 0x23260f6e +- 0xfad89dcd 0x57586681 0xadc4fba5 0xad0f71b8 +- 0x91a3f188 0x20d62385 0xfecda9cb 0x33d67776 +- 0x2abb0e6c 0x0ad16087 0x486332da 0x2928d342 +- 0xf6d1b174 0x5e133a4e 0x72fc0ad4 0x940578b8 +- 0x320a42b1 0x9cbda7d4 0xf2a36135 0x00ab8de3 +- 0x5bad9000 0x5778e633 0x3952763d 0xe0e58583 +- 0xdfb0bf19 0xb11914b6 0xa67da7a1 0x8d9a9f81 +- 0x638cbcf7 0x83bf931d 0x8703b0dd 0xcab30fa4 +- 0xd6db2ee6 0x5cc2e5ac 0x717e636b 0xfdcbc760 +- 0x563b3b25 0x0e4df458 0x9efb8fa7 0x95aaa7a1 +- 0xf05b6680 0x5e237e59 0xc884018a 0x177b5a30 +- 0x3ea2c9bc 0xd0325ee6 0xb1dae51b 0x812ee29d +- 0x6d58db21 0xb787fa68 0xfd092294 0x09683dd3 +- 0xfe0d6405 0xfdd99aad 0x78744a59 0x936738e6 +- 0x6ad6cba7 0x370f7f8f 0xd208c214 0x12239384 +- 0xbe71f0e7 0xfc0ef264 0xc04e4a49 0x354f9cf3 +- 0xf5d7572c 0x07839ad0 0x834a003d 0x23ba26e2 +- 0xf4049ecf 0x5ff402b2 0xff9d6769 0x074ebe6d +- 0xdc829da1 0xc3d7697d 0x973efe4f 0xfc2a9165 +- 0x126dc518 0x0b824ca4 0xc438fb70 0xb7b0ee00 +- 0xbe56afd9 0xa3d8defd 0x971455ae 0xc11ffde7 +- 0x346e619a 0xb41111a9 0x6004b62e 0x896c668d +- 0x738e458c 0x351f9fdd 0xe771b2ba 0xad6d7464 +- 0x719b57c2 0x6f6a4611 0x8a676f2d 0xb8db1c43 +- 0x3f102641 0x51bffdbc 0xb7862565 0x5d8dd231 +- 0x7a79bd39 0xfa472894 0x0fd1d2ff 0x64cf589a +- 0x38234d7a 0x5c9acefd 0x8eb0b9f8 0x761e1c95 +- 0xf2fe78fa 0xe06220d7 0xaf82a919 0xf4e196e1 +- 0xa17c8935 0x06d08d16 0x6bad807b 0xf410805d +- 0x4ff2bce6 0x3297c81f 0x06e35353 0xbe1f5e1c +- 0x65d1cb92 0x0dc69b2f 0xac55d597 0x636ff24c +- 0xe2e4f2ba 0x63d64922 0x4b2e9f71 0xad2279ec +- 0x5f0b5c0e 0xac688638 0x35613358 0xf5531360 +- 0x54a304e8 0x27ebfe65 0x977b5a3c 0x3dc5e10c +- 0x73b32ee9 0x3a2c9454 0x30a149c6 0x31e5b55c +- 0x2c10854f 0x745cd38a 0x2853a27b 0x6629e355 +- 0x0bb67e39 0x5469184d 0x694a9bb6 0x0a0ca25f +- 0xa878c5de 0xee15fd46 0x23d92ff8 0x02328404 +- 0x1c9402b5 0xa46b6ce0 0xefc3e947 0x0e9312ad +- 0x5830ae9e 0xe30e32f2 0x9db8ee81 0xe8aeebbc +- 0x30675c83 0x447278c2 0xab2bad3b 0x08ba3d0c +- 0x1124e681 0x3691242d 0x903c8d2b 0x3281c312 +- 0x22af690f 0xd69a150c 0x57622c5b 0x29313c73 +- 0x6ab2d7c6 0x39b06dad 0x6e1f9f81 0x03324986 +- 0x53a49093 0x7654eba3 0x2527245a 0x9af596fb +- 0x818ffb3a 0xa3817173 0x6a2c4b80 0xfcc42ad5 +- 0xfb1bbb69 0x3a3720a2 0x90a89bcf 0xed80308d +- 0x7753cb1c 0x1c2654a5 0xb01ee4af 0x81091e85 +- 0x9067b3f1 0x2e2b9b5e 0x9fb0c7d1 0x78fd9f69 +- 0x5771c46d 0xacdf498d 0xfd8b8e77 0x4c15fa61 +- 0x607120ce 0x18a298d8 0x73716420 0x65e5e06a +- 0x18c53e04 0x35b84427 0xcd82b522 0x9a7d26bb +- 0xd56b4b74 0x49b47fe8 0x63178dc6 0x0bac0f46 +- 0xc8b0755a 0x9bbaaf1f 0x18131d2b 0xcc019330 +- 0x0ceb89bb 0x8808c2d6 0xfb5bd86c 0x6c945b71 +- 0xdc911924 0x4ebb8d35 0x44e46d08 0xabfee615 +- 0xf456931f 0x7a244955 0x0bffce7d 0x5533ca5f +- 0xb1b2c636 0x4f29075e 0x64012561 0x7aa5e7c7 +- 0x9c8a0666 0x9698782d 0x3481ad8f 0x21a55b19 +- 0x735aa45d 0x4245b9c4 0x0d4c3fdc 0xd1b10966 +- 0x7035fcde 0xc2257947 0x4a37271a 0x9da464a9 +- 0x228adbf8 0xbf309e03 0x096f560a 0xa2b8ca78 +- 0x427702cd 0x35a99cf5 0x99811758 0x6953db58 +- 0xec07533e 0xe95838b9 0x61c71654 0xc9cce595 +- 0x275af106 0xc8697af3 0xb3f27e58 0x411d8d30 +- 0xd0d90ecd 0x1503b9dc 0x76bf070e 0x49f89ef0 +- 0x7333b083 0x53f9c44b 0x8330c3a2 0x6a1119c3 +- 0xca555f2b 0x3d51fc6f 0xac7b3320 0xf8e42cdf +- 0x053753fe 0xc122336f 0x94d289c6 0x088b5a64 +- 0xc3aac7f0 0x96a76344 0x2ff05828 0x9b4f2af3 +- 0x46de6a46 0x4ed29d98 0xe2ab7634 0x27481ddc +- 0x300ca71f 0xce7ac539 0x88240e09 0xb1a14e78 +- 0x2addd4c5 0xb3a7f320 0xe91f549b 0x6881c45b +- 0x0e381c47 0x1018feb4 0x64679650 0xe62281cc +- 0x670ee6d4 0x0d226160 0x947b7f08 0xbc595a74 +- 0x2380c0b3 0xc0235785 0x63b41221 0x80b9cc31 +- 0x3231b4ae 0x33ed5718 0xf2c5c90f 0xdd3b03ea +- 0x67dfca08 0x453e9d29 0xa2bdecbf 0x5e9a3181 +- 0xad17aea2 0xff0a8f13 0xdf946849 0xcfbbecb7 +- 0xb0a602d7 0xb1a820c6 0xfe7abbc8 0x7f70790d +- 0xeb5f8863 0x266d3cc1 0xbd552a44 0xe19b1b3d +- 0x856aefbd 0x51c11f1e 0xde661b7f 0x61c075d2 +- 0xd0f6a834 0xff1d0d37 0x6793d1c2 0x70c133a5 +- 0x20c4d2cf 0x8c80d4d3 0x61ebe382 0x788b74df +- 0x11c56903 0x535889ba 0x0a9c7380 0xf9de2837 +- 0x09437fe7 0x1627c6b2 0xb943bdb8 0x69bc29b2 +- 0xee9795a4 0x83c992e0 0x95437918 0x8ce166a2 +- 0x56b56b66 0xb0680941 0x623d38a9 0x2add07ad +- 0xe583ba09 0x96f6532a 0x3eff4696 0x2a8a6b0b +- 0x905b913b 0xafc01673 0xe871e006 0x2c2339ad +- 0x248438e5 0x96d83e53 0xb3a75d6b 0x2258cf63 +- 0x69ff39bf 0x95727173 0xc3ac09d5 0xea8d2c06 +- 0x0e7c0a4b 0x144fcade 0x28a9a5a3 0x97c11ae8 +- 0x89865e3d 0x1640cd32 0xe3e551f8 0x1f7ba770 +- 0x6d23fb31 0x11eceae3 0xc8ccb8ee 0x46dd0bb0 +- 0xd01a46ff 0x0504adf5 0xec6e170e 0x2e3d7ac5 +- 0x70f893ac 0xaf9963db 0x061e283c 0xf0ad248f +- 0x2fe97e19 0x881fd340 0xc686c9d5 0x88ea8ba5 +- 0x92f05cd7 0xd6716148 0x6fc47fc3 0x2c51d9b9 +- 0xd50a7faf 0x4eccacd1 0x7c92f802 0xa63ffc83 +- 0x7cb0ab1d 0x4492e81b 0x7d906554 0x43306ba1 +- 0x73a5d57a 0xe57a05d6 0x6850b964 0xefed595c +- 0x7754978f 0x629e8236 0x62ec4dde 0x247439ee +- 0x8b9982fa 0x4eece5c2 0x48599175 0x0fdc752c +- 0xecd87b12 0x94936c75 0x17a45ea1 0x80a899ac +- 0x22a39ee7 0x745730b6 0x03ea4daf 0x4a7570d7 +- 0x307621fa 0x7322e0a7 0x3a8e0316 0x454e46f7 +- 0x08773750 0x156dcaad 0x5562bc06 0xa23a1ee3 +- 0x20435211 0x1d679ea0 0xb220e205 0x682cc1a6 +- 0xd64a71c7 0x3ca7f8e3 0x2e92f253 0xa7cfdd0b +- 0xd62b4053 0xf5c5f641 0xbf72dde1 0xdcb716c1 +- 0xe2f7b05d 0xa03145ea 0xc09828d2 0x7dae7916 +- 0x6fb97c79 0xb3a85204 0x998a9c7b 0x5f42ba8c +- 0xd9c628b3 0x6b17bacb 0xa889b716 0x450ff97d +- 0xe9166f3c 0x2d20777b 0x82a003ae 0x2c7ae0aa +- 0x6011a9fe 0xfeed34be 0x1328f67e 0xf61003a3 +- 0xfaecdf20 0xee18c81e 0x731a0302 0x11a39e60 +- 0x355d78dc 0x99088f2c 0xcf253759 0x97347603 +- 0x736f71f1 0x37e4b395 0x9cc74540 0xf7e39994 +- 0xf01c5f64 0xbec519f1 0xa79c1067 0x76000d5e +- 0x1ac85b6e 0x51e5b7a3 0x62a97ddf 0x6f20096a +- 0x2af51e77 0xea5554f6 0xb4e581da 0xc1ac4ba8 +- 0xc8f22bf7 0x9e254d3b 0xd7dd62f6 0x6461ae3e +- 0x423e1f10 0xf143e7b9 0x18c73b04 0xa43de614 +- 0x2da8d02f 0x9befa706 0xc01dcd49 0xa278f1e0 +- 0xd85f3177 0x6b6679fd 0x1ccef04e 0x53af9252 +- 0x34d751db 0xc8d32c86 0x3d725097 0xa64ed581 +- 0xd090c42f 0x9e92bf3f 0x6f82b089 0xd42728eb +- 0x3dd651e0 0x1985bc52 0x4b0f4159 0x0f99bd7f +- 0xe2597023 0xca0cae4c 0xce48a894 0x7249dd88 +- 0x8e146632 0xb4be1d6c 0x790ae7e5 0x6747b657 +- 0x52143947 0xa2e42ed3 0xea359617 0x6ca01a11 +- 0x35c5e2dc 0xc97b78fc 0x5db6db2a 0x80fe3414 +- 0x27da19d4 0xd7431d04 0xa91e9110 0x7d8ecb23 +- 0x2508700a 0xc8c71ed9 0xd28835af 0x018c2887 +- 0x3d0a6fab 0x3e8523d6 0xd0688dee 0xe5c3865c +- 0x838d72e4 0x6bb73a1d 0x497a59ca 0xf77c56de +- 0x38ecb72e 0xa55e3565 0x04b12c92 0x1aec9997 +- 0x037c340a 0xef0d04c3 0x78f74bd6 0xdec9b9e8 +- 0xd95b61ea 0x5528e8f5 0x4ecd325c 0x88ffdc0b +- 0xb337ac61 0x899d90e7 0xb5eeb978 0x8295d9ae +- 0x1ed8978b 0xa8849eda 0x8633b4a3 0xb8c858b5 +- 0xbe3c4375 0x28b9e84e 0xb2a26def 0x22f8f66b +- 0x3a4aed99 0x0c4914ea 0xad103249 0xba5a5eff +- 0x8a052461 0x26938899 0x915c6ed7 0xe6268ad9 +- 0x246e8c74 0x75f3c196 0xc3e725d6 0x92e02549 +- 0x1f78a5cb 0xeada57e5 0x40f14906 0x0215e49c +- 0x57c06bae 0xc1896b87 0x0cd40a63 0x60741d80 +- 0x11a69899 0x80fed942 0x0497e115 0x56697b55 +- 0xba89c3d4 0x27d6b7c5 0xddff87b0 0xd3b1ff2f +- 0x3160e528 0x9cca1286 0x13b4fdf1 0x38cdd907 +- 0xb50c4597 0x4c151714 0x1cab86c7 0x23126a3e +- 0xe26e9749 0x289a0d0e 0xc4004640 0x9d33928d +- 0x33b691a2 0x15ed6e6b 0x6e773980 0xadd59678 +- 0x188ba49f 0x08da4c6d 0x6d150d0b 0x0c6c7b98 +- 0xc8e1df7e 0xb8b1e692 0x5e89fd35 0xcb253d24 +- 0xfc6ee27c 0x8013de3d 0x1d38012b 0xe50a8f7b +- 0x7d410ff1 0xceee4e9f 0x0e8094b6 0xaa1a5f57 +- 0xb395a551 0xbd62b2ae 0x5d7b34c8 0xbd2d6195 +- 0x33af4109 0x0769ff18 0x9c6cc123 0x78ee6eb6 +- 0x412644e7 0x70e0c6f4 0xf45d8fc6 0x0435f5af +- 0xd43622b7 0x27409d5b 0x6dd04e8f 0x9f02ecf5 +- 0xca415f7d 0xc9f439c2 0x7198e539 0x20476b75 +- 0x3cdd8dd8 0xce17fbb0 0xa5bc115e 0xb0ee52c1 +- 0x0b074cfa 0xd26d4f99 0x3b43320b 0x230b680b +- 0x9908f2d2 0xcbcb1952 0xf45a2f53 0x7b4564c6 +- 0xcf2fd983 0x414fe4b2 0x55ea7f11 0x63e8117d +- 0xe8954052 0x7c2ea344 0x97a02aaf 0x6ca874c3 +- 0x1ae5b4ee 0x41754eae 0x6954abe0 0x115ddcda +- 0x9a27968b 0x32a53e65 0xffe47b2f 0x4fe7e5a7 +- 0x6016dedc 0xb3c0893e 0x9626776d 0x5ec773f9 +- 0x1104e01c 0x1473cfb3 0x43b2cedf 0x8ca9d119 +- 0x7f1bc844 0xd8bb7387 0xba90d2ef 0x2bb0dcf4 +- 0x2340f124 0xa5bd514c 0x50afab05 0x718f5ad5 +- 0x7c03fad9 0x71d00d2d 0x1c31fdc2 0x4a938809 +- 0x40945ded 0x437f2a0d 0x83c10d64 0xd224c6ab +- 0x0cd44481 0xb0040966 0x27fd6e7f 0x6ff45d4c +- 0xab057ad1 0x8fa4e5d4 0xac50270c 0x6e4926ca +- 0xc5721498 0x2529b458 0x40ee2ad5 0xde5e21f2 +- 0xea8964ca 0x56766e60 0xdc3b8702 0xa93528d4 +- 0x28d7713d 0x42edf022 0x59774dd8 0x200ff942 +- 0xe7a4d769 0xd8c4ef5e 0xe177f715 0xe9d53cd6 +- 0xc11270bb 0xb25977e5 0xb80867b4 0xfb48468b +- 0xdbf166a8 0x49700d85 0x0f85f98a 0xa7ca7a75 +- 0x109817ce 0xca243f19 0x8bed7688 0x9a1c8231 +- 0x94f0ce97 0xc36309ca 0x90ecac24 0x67e7e0de +- 0x86b18d62 0x18c7b7a5 0x622f5d3a 0x47e1e067 +- 0xdc96b94d 0xe4a03beb 0x59d17692 0x040abc0d +- 0x44a5ae50 0x3d3dab7d 0xc18dfd30 0x2802b9d9 +- 0x6818379f 0x56db41d7 0x97cbf039 0xe41d6a32 +- 0x64b5fb01 0x6506e0b4 0xd60a3234 0xdf3573d2 +- 0xac148579 0xe7f46ac0 0x05e1c763 0x904a5aa9 +- 0xc7ca1ee0 0xe0c3b047 0x5e36e1bc 0x447a9141 +- 0xe24654df 0x9853a49b 0x6a29cedb 0x022f00dc +- 0x6df2a7a7 0x3636da02 0x72bb9c81 0x4f0e0918 +- 0xd649f4a5 0xbb0c81f9 0xc0ba93fd 0xc1b390f1 +- 0xda84e720 0x1aea0064 0xf3ee67e1 0xb874ef4a +- 0x82467ce6 0x59abf506 0xafbf145a 0x9a4cf8a1 +- 0x17247c89 0xd8669398 0x1796eaf7 0xbc2d24a9 +- 0xcb486570 0x17a9db23 0x3e6504f0 0x08684517 +- 0x2723ab28 0x7081b814 0x8a265a04 0x697e6d8b +- 0x69b146dc 0x6434c182 0x27ec8101 0x864405c5 +- 0xfff86c9e 0x3052d8a6 0x23d283db 0x492970e8 +- 0xbc6c64c3 0x46d8f98b 0xe16e7ff3 0x731e4f82 +- 0xbd26b1af 0x6b30e6c1 0xff192fce 0x097e0bba +- 0x49df63a5 0x2fdc3f01 0x50aae053 0x60177b8f +- 0x1949eb85 0xa46084ce 0x9658f694 0xcb951fbc +- 0xc53806d9 0x63a17d30 0x3b3f86c2 0x8a37aa6c +- 0xedf8fe5c 0x87aee1d3 0x8c680126 0xfd8b27a6 +- 0x231fa106 0x69358c25 0x4502c348 0xc107861c +- 0x46280e70 0xcf6067ac 0xf6a04ff3 0x3e488677 +- 0x6f3fb4c1 0xeec1f758 0x560e1c48 0xb604c06b +- 0x69e34b1e 0x8ef41dec 0x854cea22 0x726581d7 +- 0x55ea91f3 0x38ae4053 0x5ff7389d 0x6952cbf6 +- 0x09aa0fc1 0xcccb1d50 0x5c1a633a 0xde1eba46 +- 0x797212d8 0xa943fb3d 0x6063a1a8 0xbe68ef36 +- 0x6ba0d5ba 0x0dbe2061 0x47711712 0x62679807 +- 0x6f34009e 0xe6fe8f18 0x66a6a64b 0x3f80f472 +- 0xe953d5e0 0xbcd8196a 0x086faad0 0x49da7f16 +- 0x7f2199a5 0x55af4af2 0x085b4d38 0x22e634bd +- 0x6cff0416 0x343466f4 0xd121a7a6 0x6caa3942 +- 0xe4f365a2 0xd832eb0c 0x616728e5 0xcca4c71a +- 0x4010cdc2 0xd0f1d1cb 0x5e695f89 0x27719206 +- 0x0ec92854 0x76144a1b 0x49808021 0x12457a1b +- 0xdde7aa5c 0x8f1a077f 0x110a4a5a 0xb3a5ad31 +- 0xaacebf8f 0x66ff7f33 0xa2340971 0xfb4c7e82 +- 0x8dd536d7 0xafd2021a 0x72aa9c6e 0x22df6952 +- 0x83c4b4fb 0xba515555 0x93eee8f0 0x22d0ed5a +- 0xbec05586 0x83828f28 0xe0d7f930 0xac0f0199 +- 0xef6d76f9 0xf56ebdf8 0xf67323c9 0x8b805745 +- 0xce5902c0 0xfa2ce3da 0x10f836dd 0xe1ac6d97 +- 0xa0e415ea 0xbb7c32ad 0xc421f3b0 0x8166e898 +- 0x74e7a73c 0xf454b82a 0x631369b1 0xe30ed23f +- 0xdaa1c75b 0xe7c9c6a7 0x5f33c375 0x99c05187 +- 0xf2d6e6ae 0xcd2045b8 0x92ff3009 0x15082015 +- 0xd1a1580e 0xdce25f9b 0x21984a75 0xa9be5388 +- 0x099a5372 0x3ab9bcfa 0xdb9069aa 0x49a99be6 +- 0x42a9ee0b 0xfe32d832 0x24e11ad3 0xd16f596b +- 0xb95982cc 0x754ab1c8 0x42ffa128 0x539e823d +- 0x28e0f976 0x262ddfc0 0x2a16e7ad 0x49b5acd9 +- 0x931f3def 0xdc419b84 0x8412cc3c 0x81056cd9 +- 0x91933e1f 0x57710b15 0xa55d2696 0x87d88724 +- 0xd4fedfdc 0xcc3825c6 0x397f382f 0x80f9b6ba +- 0xcdd6d59f 0x24b984d8 0x8f1c5bcf 0x25bcef1d +- 0x00dc603a 0x76fd94c2 0xa267a7dc 0xa6e90a6a +- 0x5c5916d6 0x065a52cf 0xa28d3263 0x9b17b72d +- 0xb8436b48 0x1b1c2391 0x1fda3395 0xa6cecbcb +- 0xbc4ec502 0x1766b590 0x5945fbd6 0x6a124405 +- 0xf92d06f2 0xe24694b7 0xf6befd08 0x8266cf5c +- 0x03ed670a 0x5f98be62 0xf27b7e2e 0x598cf22c +- 0x2e855591 0x879815fb 0x153799c6 0x3820faf6 +- 0x3d3a2cc6 0xdbb6dece 0x1a3c46b2 0x5031bdda +- 0x47894c03 0xe43661fe 0x7a6ee548 0xa5ca9779 +- 0x6aa9e105 0xbc8505a3 0xa03b860a 0x448faeb9 +- 0x367de4a9 0xc9779c7d 0x6535ad8c 0x4b7fcacc +- 0xb2db5c10 0x0ab41ec6 0xe528ab90 0x5e6f03da +- 0x98bc76d3 0xf38df42e 0xea59b039 0x1c2eaa28 +- 0xca30dac5 0xdb0eb8c6 0x60063860 0x18823f8d +- 0x164e2f28 0x7cbbe080 0x70a12315 0xb08f44d9 +- 0x5fbb9453 0x4bc62738 0x9fa15ffc 0xe4033ca1 +- 0xc9dfbc13 0x58245d7d 0x588113aa 0x8f5a6ac8 +- 0x92588a60 0x26330c74 0xb2aaf0e3 0x24ada1ea +- 0xa9e973ae 0x624b73e7 0x4ef961db 0x95ede155 +- 0xf2bb86ff 0x96bc79d9 0x95cd646b 0x1c3af453 +- 0xf60fa711 0x10905115 0x0e24b740 0x169bb227 +- 0x34cee6f0 0x990980db 0x18d8ace5 0xd4c87504 +- 0x29515d32 0x2e5d9c04 0x87dffa60 0x12e815d1 +- 0x021db8e9 0x2c5a42fd 0x6e3a1a13 0x88889ab5 +- 0x3bc915a6 0x608919c5 0xd310a970 0xea8f3218 +- 0x949f55bc 0x9ed7aadd 0x6d990157 0x181f1c2f +- 0xa940df64 0xf3be8c39 0x7ca2e699 0x7b4f07f9 +- 0x89e83fee 0xe66b9493 0x54fc3d17 0xa63d2d46 +- 0xd5e835d5 0x910e0144 0xecf67025 0x1fa6a93a +- 0xe692dbca 0x466af681 0xc2bc808c 0xbb4ebd60 +- 0x74d5c729 0xa283ad25 0x1e66fa23 0x6d372988 +- 0x753c9fcb 0x1742efdb 0x5b68cf15 0x372a0e33 +- 0xaa3a7ebd 0xa0e944d5 0x95d5cbb4 0x4fb6020b +- 0xced927b0 0xb2afea78 0xd0646b72 0x1622fad4 +- 0x4672c6b6 0x736ae4f8 0x8d46a4db 0x0e6a432e +- 0xe0a30a98 0x4c2bcf4f 0xd87acedd 0x19682d7a +- 0xf97c025c 0x55d8feb3 0xbcd4d2ff 0x236c6f9f +- 0x8ba0246d 0x42812f73 0x327636f5 0xc92cd30a +- 0x08a69d9d 0xc735a946 0x82eca01f 0xda0753a0 +- 0x7077b1d1 0x17b05834 0xfa24bc02 0xf49f4473 +- 0x8f9ac6b4 0xa880c630 0xf7457b4d 0xd5f829e4 +- 0x25c49a99 0x1176a997 0xbb2d2009 0x61d35764 +- 0xa322c752 0x6ef3ae02 0x5faae6f8 0x9a52acf1 +- 0x19176f43 0x43843b07 0x14efc471 0xee474403 +- 0x319c4857 0xa19adcf0 0xc0a466e1 0x02db14ad +- 0xb7f211f3 0x72aa6ca6 0x0eb9bffe 0x48a6d284 +- 0x9a93a2ee 0xac09fc5f 0x92a62c4f 0xd34f0271 +- 0xffb348c7 0xf229b6e2 0xc68ec1ca 0x19577dbc +- 0x069a10bf 0xf64ac347 0xf7c3c848 0x81975294 +- 0x6376e550 0x93b53440 0x8bb17daa 0xc4c64c07 +- 0xcaeff293 0xd51497b0 0x33da3565 0xa73d5def +- 0x4bf4dcde 0xfb470fcd 0xca7db864 0x7ef17022 +- 0x47567363 0xd8fb8d74 0xa68c3c72 0x8202e4f3 +- 0x75bf1798 0x16a70fd2 0xcc3b697f 0xab9a1075 +- 0x13f56ef3 0x269d0302 0xcb655a43 0xc9a4de88 +- 0xfb8363de 0xff40f36d 0xd2555489 0x647a7995 +- 0xfd8eda6e 0xa3958c9a 0x20e029b4 0xbed3e225 +- 0xa7df5f17 0x63bc3c1a 0x337ecc9d 0x6c329508 +- 0x786aa47e 0x1db5b093 0xc0acd73b 0xf9587237 +- 0x243e5d40 0xd3623c3a 0x338c4740 0xb672140e +- 0x43640a9b 0xb7ef3f6a 0x44151074 0x749bcc46 +- 0xfa1f103b 0x0fefb19e 0x58855538 0x138ad276 +- 0x2641fd80 0x297d99d0 0xfaa63ba2 0x00b6f11a +- 0x3793fb6b 0x124763a1 0x8b9419ac 0x56abf9eb +- 0xdbf83419 0x43570571 0x37299cd8 0x8b201e62 +- 0xa4058fa5 0xb320e91b 0xbe7d40b7 0x4eca3b2d +- 0x8519c155 0xf4b17021 0x9e4c572a 0xdc1f9e16 +- 0x39a589a3 0xa6cfc7a8 0x5b986910 0x64e150e7 +- 0x60b6f2c1 0x02bacd3f 0x2f3b5a5c 0xc6f453a8 +- 0x15a87a7e 0x76104a14 0xafa2ef63 0x2cd48dbe +- 0x3c7abddc 0xd786ea5a 0x4f65867a 0x355cda38 +- 0x2ae03d9e 0x4f11f6be 0xfc0a0034 0xde4ea602 +- 0x21ff83ea 0x0f12d913 0xedf4da28 0xc96d8fd1 +- 0xd7e82c3c 0xfec63bdc 0x37a456d7 0x3007e18c +- 0x091a47b6 0x82f1c641 0x82219cce 0x3e7e6993 +- 0x7b3a2115 0x0b8e1a02 0x40f88213 0xfa2f9c21 +- >; +diff -ruN u-boot-2015.01-rc3/arch/x86/dts/m12306a9_00000017.dtsi u-boot/arch/x86/dts/m12306a9_00000017.dtsi +--- u-boot-2015.01-rc3/arch/x86/dts/m12306a9_00000017.dtsi 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/dts/m12306a9_00000017.dtsi 1970-01-01 01:00:00.000000000 +0100 +@@ -1,750 +0,0 @@ +-/* +- * Copyright (c) <1995-2013>, Intel Corporation. +- * All rights reserved. +- * +- * Redistribution. Redistribution and use in binary form, without modification, are +- * permitted provided that the following conditions are met: +- * .Redistributions must reproduce the above copyright notice and the following +- * disclaimer in the documentation and/or other materials provided with the +- * distribution. +- * Neither the name of Intel Corporation nor the names of its suppliers may be used +- * to endorse or promote products derived from this software without specific prior +- * written permission. +- * .No reverse engineering, decompilation, or disassembly of this software is +- * permitted. +- * ."Binary form" includes any format commonly used for electronic conveyance +- * which is a reversible, bit-exact translation of binary representation to ASCII or +- * ISO text, for example, "uuencode." +- * +- * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT +- * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED +- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER +- * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +- * +- *--- +- * This is a device tree fragment. Use #include to add these properties to a +- * node. +- */ +- +-compatible = "intel,microcode"; +-intel,header-version = <1>; +-intel,update-revision = <0x17>; +-intel,date-code = <0x01092013>; +-intel,processor-signature = <0x000306a9>; +-intel,checksum = <0x3546450b>; +-intel,loader-revision = <1>; +-intel,processor-flags = <0x12>; +- +-/* The 48-byte public header is omitted. */ +-data = < +- 0x00000000 0x000000a1 0x00020001 0x00000017 +- 0x00000000 0x00000000 0x20130107 0x00000a61 +- 0x00000001 0x000306a9 0x00000000 0x00000000 +- 0x00000000 0x00000000 0x00000000 0x00000000 +- 0x00000000 0x00000000 0x00000000 0x00000000 +- 0x00000000 0x00000000 0x00000000 0x00000000 +- 0x86c5b0d4 0xf6978804 0x7f4f5870 0x6319dc3c +- 0xbb3b7d61 0x33cf9075 0xe8424658 0xf611a357 +- 0x5a3401db 0x42caecce 0xb4d8e75e 0xe6dbaf24 +- 0x7861b35f 0x6bd717bc 0x23b9b731 0x82ec1ac8 +- 0x20337b64 0x5396dbf1 0x59973bff 0x724bc7e9 +- 0x5237193b 0x0b8647c1 0x6a0d0e16 0xbf9ddb5b +- 0xace2cc1c 0xad707638 0x056f102f 0xa37e60f8 +- 0x76255642 0xfb86e030 0xb8069a40 0x367795f1 +- 0x653fb05e 0xab7f14ad 0xb6e8a8e1 0xd2598d20 +- 0x2eba3f68 0x78b372f1 0xba8d13f8 0x1f1de861 +- 0x97f951d5 0x8097c728 0x27dbf904 0xb97906a8 +- 0xffe7a4ac 0x4b947668 0xc1dbd726 0x2adcf777 +- 0x63b1bcf0 0x818e2a1b 0x49aa907b 0x2faf5e8d +- 0xae842352 0x82707fae 0x0aa12b41 0xa0bae11c +- 0xb4298c47 0xd2b4099c 0x4ff625f2 0xcd2630d4 +- 0x79850981 0x05dbf57d 0xb05b81a5 0x56e73ec7 +- 0x95cb3897 0xe262bda5 0xb2c6e288 0xcb7f8e77 +- 0x72b8bdd3 0x3f400494 0x63ade65b 0xbc4adc71 +- 0x00000011 0x06c0f8ff 0x0eb63d77 0xc54cdabf +- 0x76bc8860 0xdd142643 0xe7bfc220 0x17aa0a91 +- 0x4fd676ba 0x4b6b1a15 0x2a1a1c16 0x4fed6de0 +- 0x8c3d6bcf 0xbb319bf6 0xa82532f1 0x7c8ce014 +- 0xb830a38b 0xec25bc6b 0x61c8a8a9 0x49a21dba +- 0xfcf8bad0 0x7372f29c 0x1f7fbcdd 0xc2ff42f4 +- 0x780878f0 0xc967068e 0xe19cc3c9 0x155e6646 +- 0x75235c43 0x9aaf3741 0x9dfd116d 0x0f031b6a +- 0x4963e039 0x6918daa8 0x7f0ca4ab 0xd77dad79 +- 0x2f8847e8 0xf79c82a4 0x6a6aaad4 0x24f07dbc +- 0x895d3f6a 0xc96b2eb0 0xff50228f 0x573d364a +- 0x5fca9d56 0x3c11c35b 0x3e90fb12 0xc4604067 +- 0x5c980234 0x7c42e0c7 0x60cca3de 0x637a4644 +- 0xedc43956 0xb0efb4e1 0xe94716fa 0xa6478f51 +- 0x33965654 0xdf6b40a3 0x48ac1b18 0xd6723c94 +- 0xf040d6d1 0xaf850470 0xe2bcde48 0xb90a4998 +- 0x8f620105 0x3d592878 0x2f697bad 0x9f7721d9 +- 0xec34444a 0xb0594770 0xd7180f9f 0xa510a168 +- 0x460563b0 0x5d4f34f4 0x21dfc16b 0x051de344 +- 0xa57bc344 0xff2c7863 0xf0bc063d 0xf5a89004 +- 0x79a81dab 0x9e8cb974 0x2309b0a4 0xa47a46de +- 0xcf9c0c44 0xf761c817 0x67ab642c 0x0db4422f +- 0xca3616fc 0x79e66c8a 0xd56a3332 0x5e0f338b +- 0x5814cb3a 0xed1b9a4d 0x47d59f72 0x25b03786 +- 0x3edd1d42 0x8cd947cd 0x706e6ebd 0x82c2bada +- 0x1bf6a96b 0x77dd859a 0xda35335f 0x22fab458 +- 0xd0661fd8 0x02bb4a42 0xe2a2bcdb 0x0616580e +- 0xd35be23f 0xc206d16c 0x401218be 0x51107c3d +- 0xba84b8be 0xace4d8f2 0x505b9b28 0xc517034b +- 0xac5ba582 0x7419fe54 0x43493cb1 0x2fe0a66e +- 0x206039b5 0x07569011 0x230ce53d 0x168d427f +- 0xbfe0bd10 0x82bf11be 0x5b55475b 0x5490a0e9 +- 0x1c3c1e3c 0xacad77de 0x1666512f 0xfc3250d8 +- 0x930a6312 0xdd85c066 0x1b95c18f 0xc8bbd3b0 +- 0x1bb2a34e 0x642c7653 0x0f536213 0x1f7ab4eb +- 0xaa5ef677 0xe6ac9581 0xd7a2fe73 0xd417dc79 +- 0x455a6877 0xae825a40 0xe0c98bec 0xac39ba49 +- 0x299d9bd9 0x957d0bb0 0x1645111b 0xe9da4beb +- 0x1b005ce7 0xddb742ce 0x6c5f3ffc 0x24f74d2c +- 0xf4ace044 0xb21bc7ba 0x338002dc 0x240effa1 +- 0xd208ae00 0xfe8c2b5c 0x9a457293 0xd9365ac4 +- 0x98f24244 0xf6d1aaea 0x7b874350 0x1ba4086b +- 0x1d3bf168 0x2bb6f4fa 0xb27f8477 0x8da836f6 +- 0xa8762693 0xc377fa64 0x74cfd979 0x90435c25 +- 0x29d80e17 0xc3503c9c 0xaacd2178 0x232c748d +- 0x6fecd3ba 0x00fb4aa0 0xbac3ee19 0x6e5c63e3 +- 0x17823c14 0x0e9d33bc 0x0fa9de06 0x998b14b2 +- 0xfdd8c80d 0x01b0591b 0xf70bc4ce 0xb278c496 +- 0xa7e30708 0x69cf8420 0x14f8b744 0x8bb8a0ff +- 0x168f6db0 0x95da6db2 0xf96d121d 0x67fd06f7 +- 0xcd81d278 0x8693d095 0x15e1a24c 0xe5f554f2 +- 0x499874e8 0x30fc0785 0x0f4fa1b9 0x65c93dad +- 0xd939bf24 0xdad29721 0xf253b752 0xf6ff59da +- 0xc5dfaffc 0xf0071f34 0xdb0db8b0 0x24475e2d +- 0x2a4d5b8a 0xf7624bea 0x3fdcbc90 0xb5a66e35 +- 0xd0f08636 0x24643caa 0xc5d08e83 0xb134c55c +- 0x8e3653c7 0x34496b0c 0x6b2aeebc 0x2fbab601 +- 0x105613a2 0x7babd55d 0xa01af846 0x248be690 +- 0xed27917c 0x26ee6e13 0xa1dac5fe 0x852ed91a +- 0xfc83fcca 0xdf479c33 0xfd6efe96 0xdc62521b +- 0xa37d2a8c 0x1d2bad9e 0x4287614f 0xc4f7b62c +- 0x2aab0562 0xec6d4226 0x52853fb4 0x264e3507 +- 0x1c3af366 0x33269776 0x81b8529d 0x115530dc +- 0xe035f98f 0x433d1b6c 0x1ea6daea 0xecfd2ad2 +- 0xa57a0c22 0x1dbe3e12 0x6fafe41b 0x8e579e35 +- 0x6c493fbb 0x034dd4f9 0xd17cd6f2 0x05c5cfa8 +- 0xd9bffa39 0x0fc16e9c 0x831b88c8 0x7e7dce3e +- 0x3320bc7f 0xd5abafaa 0x217ab526 0xade2597d +- 0xf01b00f2 0xc9e34b72 0x00a4cb0b 0xdc198512 +- 0xdc7cc8a1 0x89db07b5 0x6c2153ea 0xb8bdb8aa +- 0xdf8a1ae8 0xa517f6b1 0xd32569d9 0x37e79008 +- 0x3c7527c3 0x7d5b2d3b 0xb31cb907 0x35db7f6c +- 0x0ab0cd65 0x75feaded 0x7c8260a9 0x5bc04f56 +- 0x2fac9f60 0xd7b3a2c0 0x2b393634 0xc2df7f43 +- 0x1ff2fa9f 0xc81af169 0x188b1f4e 0x08bf6f86 +- 0x5ab2f188 0x0a71eb64 0x03b57501 0xa684fc23 +- 0xa729ffef 0xe3b4a709 0xf9eb97d2 0x01506c95 +- 0x0d9285f5 0x8e1ee93c 0x7d15a0d8 0xd9390673 +- 0xf116ebd8 0x7e68798b 0x3dc8412e 0x5a9a04b4 +- 0xe3805f51 0x00493bb1 0x4ec65ca2 0x2aedd69a +- 0x7f2a5b18 0x9994ac32 0x476f3703 0x7d3da882 +- 0x5635f55f 0x7a0887e0 0x0af46feb 0xfc2f3591 +- 0x02e29400 0x70fd3234 0xc549379e 0xaf34fa5a +- 0x5bf7c649 0xeb183cff 0xa236d508 0x4525ab64 +- 0xc4301026 0xf281df99 0x0b298e46 0x9b7c1a99 +- 0xc4b24e77 0xea536992 0x5a39e37c 0x570fb6df +- 0xae5d5c49 0x01142cc2 0xda05d3f1 0x337bf65c +- 0x3c986598 0xbecefd30 0xb5e34c2a 0xe7c3847f +- 0x18cb24b4 0x71278c26 0x4b8d6caa 0xaf7c300e +- 0xfb6ce9b8 0x94c4b785 0x67275f17 0x59498cf5 +- 0xca8eeec6 0x3374e7a6 0x649affac 0x9049ba78 +- 0xff9d3908 0xaceec446 0x225ece3a 0xac1d4fec +- 0xdc050fed 0x04e3ed8a 0xb303d8e9 0xe9d26aff +- 0x0a98691d 0xf243492d 0xe3b42f00 0x6c21a97b +- 0xa385ae98 0x14ba3f4d 0xc0215cc1 0xe1ba6c0d +- 0x412bbbe4 0x39f95d1c 0x593bd878 0x45d3066a +- 0x9fcee8a1 0x3f29b2fa 0xc9ae58ee 0xed6def92 +- 0x6c8f2182 0xdba64e20 0x276c2c21 0x81ea9dfe +- 0x20ae00b2 0x8c2d2724 0x66c09f5c 0x24908e2e +- 0xfecf8194 0x6be61e94 0xcdf5d7db 0x98b829a3 +- 0x4241ab07 0x1207ef2f 0x96e7b073 0x766293ea +- 0x58eb0882 0xf12a6426 0x741b074b 0xbd4302cb +- 0x909b6c4f 0x1c4949cc 0xd4d6a3e9 0x442b74b3 +- 0xbc8cb3f9 0x0efad89a 0xa2ceff3d 0xecdf86bb +- 0x46a4a72e 0xe9d8abe4 0x94c91479 0xe99a80b9 +- 0x1072b708 0xb8318ad3 0x0685426f 0x3e89a0d8 +- 0x0b7c438e 0xb4b577d0 0x046599e2 0xd0ef85f2 +- 0x3566d2d2 0x43ade22b 0x8753a78a 0x8f6d8e02 +- 0xbdf33e56 0x8b2b6696 0x22a5e911 0xd0e0f4eb +- 0x42729c29 0x425921fb 0x82f7634e 0x2c145fd5 +- 0xff59deeb 0x018a5372 0x33c4e11a 0xc001c097 +- 0xf250cfcf 0x2f682912 0x21f40dc0 0x883196aa +- 0xcd5c58d0 0x7c329754 0x481c450e 0x9411c6c0 +- 0x69a9df82 0xacb01a1a 0xc0b569a7 0x0b7fd1a9 +- 0x4c339ad3 0xb0d9e211 0x07098664 0x14a5cff9 +- 0x53beae37 0x4e173257 0x4e1d2e6c 0xce981dd1 +- 0x45d6204f 0x3c193268 0x4f51ac3c 0x5ecffa12 +- 0x48068ee9 0xde12270f 0x0a0aa980 0xd6fe8ca2 +- 0x97d51da8 0xccf2db36 0xb3ad0598 0xbc56eb56 +- 0x0adf5e5e 0x9e320aa1 0x8ebb75ef 0x3973a323 +- 0x7e3d87e0 0x2c0d1858 0x83b7fa0c 0x36effdb5 +- 0xcd9eba1a 0xab5b5790 0xa48fbf00 0x536e2ae9 +- 0x2f2a3f61 0x05706a73 0xd2dfed08 0x7e4626b1 +- 0x172c6ced 0xbf2e44ba 0x15aefc2e 0x9cf56c37 +- 0x663c6695 0x04cece5f 0x4ce00027 0x465b1cd4 +- 0x333dc2c7 0xce41f1f1 0x6dd8503b 0x52b79af7 +- 0x564c81de 0x0e5e2daf 0x869753f5 0x16667889 +- 0xe1acaf08 0x38ffbb0b 0x83400589 0x5144052f +- 0xa3819950 0xd21501c5 0x1bdadeda 0x0a874e2b +- 0x05480284 0xe8f76f11 0x582cad8a 0x0553f942 +- 0xb6451cb9 0x76bdc86f 0x96ffe0c7 0xc630eba2 +- 0xa82ec683 0x5902ef45 0xc362248c 0x18c412a9 +- 0x1d09c103 0x2355ed98 0x5ec5c718 0x5037e359 +- 0x1508f804 0x09cfea9d 0xa16cbdfa 0x5f962b17 +- 0x85a35a27 0xa048dd30 0x6fe7ba90 0x0dc20150 +- 0xcb56daa0 0x4188fb20 0xb4182598 0xa1bc5dd7 +- 0x8c11e0bf 0x2104df35 0x025e74b8 0x79d177df +- 0xad74bb77 0x4b2419aa 0xe374add2 0x411593d5 +- 0x796778da 0x9e43a420 0x4a2e0860 0xefb48578 +- 0x47cafbdb 0xea15924d 0x70ac1467 0xf52fd888 +- 0xd2df4bd6 0xc1fc63bb 0x119ab88e 0x0e147ead +- 0xa85bd8b5 0xc2e61ddb 0xd566417d 0x6bb9f9ec +- 0x69bbcf1e 0x24d46989 0x3caf067f 0x58151211 +- 0xc2a6b6e5 0xb233416f 0x3da28155 0xf9cd9385 +- 0x7a530045 0x1eab05ce 0xb86ed141 0xa8f13a5b +- 0xf9819f81 0x66d5d5c5 0x148c1a02 0x496d3c56 +- 0x370dcd45 0x5f13f0b6 0xdd4eaeed 0x8dbad50d +- 0x0747ce54 0x69d2adcc 0xfb69c18f 0xd44ea186 +- 0x74ab7537 0x0c642449 0x88b096cf 0x3a8ad683 +- 0x408cd7aa 0x6daa6708 0xb267b312 0xa4225c7a +- 0x7a56dce7 0x6a8d497d 0x8837bcbb 0x6125397c +- 0xeb51d233 0x362bdde9 0x689657f7 0x32d09e1f +- 0x753a3d39 0xf77db5b2 0x8057908a 0xef12815d +- 0x594fffe6 0xcf3402c5 0x1a0d4923 0xca547b2f +- 0xaf9d604d 0x5d2e30f3 0xffe18005 0xe29bb0d9 +- 0x36fc10f9 0x3720aac6 0x37bc1ad3 0x47d000ae +- 0xa4b0da0a 0xa178228b 0xdd9374e6 0xa1f3df5f +- 0x9ae2e451 0x21c4aceb 0x8f9fb226 0x5190b712 +- 0x70253633 0x9c9cb5f1 0xc9178689 0x551c1a2d +- 0x6db67cc0 0xcf1b1ade 0x48449272 0xd18634f1 +- 0x9d9c3de7 0x19025530 0x121d78d4 0xae4a39e1 +- 0x62850819 0xf3d4af6a 0xe5ad5b80 0xfa053c7d +- 0x7ed68b9a 0xdbde2894 0x4b5c04de 0x65178203 +- 0x9181cdd8 0xb17e27b9 0x0e29b338 0x50156ab4 +- 0xf7726438 0x178108d6 0x1d8dc6b7 0xc3e7512f +- 0x0eb8339c 0xe2684a6f 0x7668ed31 0xd0ed6eda +- 0x4342a534 0x03840286 0xad1e6969 0xa9a6c98d +- 0x1bf77774 0xd32fc9d8 0x405620d2 0x8ab19efc +- 0xce4d7506 0x6f4eaae4 0x3e830dbd 0x76818782 +- 0xfde4ee8d 0x1953cd0f 0xd47be276 0xf2480bc0 +- 0xd1010013 0x2dd56a58 0x083084f4 0xc91b0ad6 +- 0xc2524e12 0xa60710f2 0x3d955047 0xce380846 +- 0x0f6dec2b 0x604d1492 0x5ca43ee1 0x6b51a626 +- 0x350d5483 0x8d99ae30 0xcba06491 0xcc0185eb +- 0x7b64caa6 0x2f1754db 0xca0691f1 0x6219efb6 +- 0x43291db0 0x259d3f12 0xeaf6ef9f 0x5f0e065b +- 0xad576541 0x8615a414 0x81124bdf 0x62b855a9 +- 0xabdc529f 0x01bfdf75 0x10e4c656 0xf8e86f78 +- 0x1fbe10d1 0xa6873c2c 0xdf83dcd8 0x20d35872 +- 0xf46f2861 0x22f3d642 0xfdcda29a 0x16adbdb4 +- 0x01e5844c 0x011e5454 0xf5432b04 0xd5f6a80d +- 0xb081fab6 0x64fc2fbd 0x4ca76e0f 0x3a8d8b29 +- 0x3f03ec12 0x58e2bf6c 0x24f2b8b1 0x108e414f +- 0xe76a02ab 0xcb525af9 0x623ba7a3 0x31412c27 +- 0x69c2f5db 0xd5546d8b 0x8200d2c9 0xf1e34a71 +- 0x393e24dd 0x2b867933 0x0596e778 0xc5112b49 +- 0xf433cdea 0xbc505e7b 0xf64bb064 0x1e892633 +- 0xbf17307b 0x9118de2c 0x6b1d61a8 0x1945519c +- 0x32638ca4 0x5e436733 0x3dc20ff6 0x9babf127 +- 0x485c1555 0x0d0c4e2d 0xc4d5d718 0x8cfffc16 +- 0xf64050db 0xaa4ef416 0x8d398a00 0xe4a16eca +- 0x5d9d9314 0xefa2bf1c 0x05917dd4 0xca5f1660 +- 0x59642534 0x02639b9f 0x12b895df 0xb2deaf0e +- 0x20d8f0b9 0x04d8342c 0xa1ba5f57 0xa26cdb06 +- 0xca732ca8 0xdce0c561 0xf5e4b205 0xc05f5cfb +- 0xba4a41a6 0xaf219d7b 0xce08df01 0xa02bbdb9 +- 0xc1adbc20 0xcb9ae4fd 0xd828cfb5 0x690b17db +- 0xd29ae8bc 0x8fc71289 0xd6fc9cf6 0x61c7a6fc +- 0x8e8012d5 0xd3320498 0x36e80084 0x0036d3ab +- 0x53141aae 0x987d0cba 0x57581df5 0xace4704c +- 0x3ce49642 0x991556c1 0x6cb0b984 0xac15e528 +- 0xe7d208ca 0x2486d1c5 0x93b6623e 0x340b7622 +- 0xe7e1cf7b 0x3cdeed88 0xa23c849a 0xcc6e8b3b +- 0x292add5a 0x17763ee1 0x9f87203e 0x72cf4551 +- 0x2053e66f 0x06c3a411 0xb61c2e0c 0xa4a7f3ae +- 0x0ff87dbb 0x03999ed8 0x48aacedc 0x2e126ef3 +- 0x799441bb 0xaee15b4d 0xea08bf54 0x47248787 +- 0xb60afc11 0x8c3d6a20 0x7c04f801 0xb902760e +- 0x319040eb 0x370bbd5d 0x9a1dd5e6 0x63f7da1d +- 0xb3784eac 0x3b304dea 0x987ada9f 0x2b6b1cda +- 0xf9241003 0x0d3d16f2 0x1185dcbf 0x519b7a5f +- 0xeb612361 0x28b57da5 0xdeb8419a 0x0ba13122 +- 0x062e28fa 0x5ffb9b36 0xb1258247 0x8337401f +- 0xed1f6423 0x730cafe6 0xf728c690 0xe40557eb +- 0xc4951a15 0x04a988a9 0xbf5fe18c 0x2766e40a +- 0xe4d74d13 0x8638d052 0x8eefeaf2 0x9ad07978 +- 0x32042a87 0x4385f38d 0xc9b48f02 0x02ab0ae7 +- 0x9eaeb632 0xf386c14d 0x8b1c2ab2 0xad432a24 +- 0xfc5bd462 0x2d7ac5fe 0x45dff5c6 0xa235e1a6 +- 0x825b770c 0x5568471b 0xa7ac3a3a 0xfcc6e40c +- 0x0c1be59c 0x77685a3c 0x5b1bafbd 0x40b8a139 +- 0x3dd1bf01 0xb6651001 0xf2915a6a 0x16fe1cf2 +- 0xe78467d1 0x4bec9fb1 0x88615320 0xa3920831 +- 0xed4afac7 0x206cffba 0x96c42567 0xcc2b5215 +- 0x7ca0193f 0x0e1a60e5 0xf3892c10 0x2ceee7b2 +- 0x110d3311 0x9a322e7e 0x3cb7e5fc 0x3fb971c1 +- 0x59971332 0x08386001 0xe4a2444d 0x17d9c47f +- 0x9f53c4a5 0xdb54e5c2 0xfaac9f08 0x975c07c6 +- 0x8a6e6bcd 0x4392053a 0x6473bef8 0x4b3b91a3 +- 0xfb7e8ebc 0x46c6ffed 0x04939839 0x71b93766 +- 0x47e4f74a 0x786545c8 0x77f55b59 0xdf8e992d +- 0x60a0d2a5 0x6cc8a5cb 0x113ee95c 0xa378558d +- 0x5d3b8bd9 0x3c95b2a8 0x6efa3682 0x9535dd34 +- 0x3e29974d 0xa477d069 0x2dbf58d2 0x165edae3 +- 0xea25d53d 0x44e3ef71 0xba6341cf 0xc61b964c +- 0x4612838b 0x62151b9e 0xc1de2511 0xa364130c +- 0xa9710643 0x1a436c70 0x97030b09 0x5cef28e0 +- 0xd5197e49 0x02b9ffa8 0x1b52dc7b 0x04f9428b +- 0x01ebed2a 0x1eaecbee 0xc53c4d54 0x3e34c125 +- 0x05b4f37a 0x6e3d042b 0xf1c1f40d 0x39cfe9e1 +- 0xd2938e89 0xa14b9846 0xb1333676 0x31068254 +- 0x4b627e4b 0xb5185882 0x101b52bc 0x73e05abf +- 0x68a4e24c 0x67e301f4 0x6bf8b538 0xc502e1e1 +- 0xc3889b5b 0xdfbc6d96 0x4239d0e1 0xbf3667ab +- 0xb0c4cb00 0x3efdcffd 0x7cd9661d 0x4f5eca03 +- 0x0ef218dd 0x464f0826 0x048fc539 0x6a1c63fe +- 0x76cc341a 0x1ae2945c 0x7a339006 0x858fdc20 +- 0x2a4a7270 0xd4cbe12c 0x7b27e5d8 0x998cf520 +- 0x4795ccf7 0x52e15388 0x86aa7b96 0xff1845fa +- 0xd49d1061 0x035b6a80 0x1df18220 0x28fc4fd1 +- 0xa8e8f333 0x3a9240a6 0x41a4caca 0xee736b6f +- 0xdfa7ce4b 0xd4bf5c0c 0x4e62f6d3 0xe98ae9b4 +- 0x7f544550 0x2b0706df 0x8fb2e752 0x546af9d1 +- 0x8517758f 0x53f522fc 0x03bd1819 0x6fd264e2 +- 0x16839ef8 0x44a1200d 0xcd5a586b 0x1ead251c +- 0xf58dd3be 0x80217ce7 0x0367ff42 0x2d8f2ce8 +- 0xe8a0a689 0xba33e366 0x5dc7980d 0x005c0eaf +- 0xc0c44118 0x5553076a 0xdaf39389 0x703e09eb +- 0xc54c8112 0x4a26135c 0x36a46f2b 0xdc93ee12 +- 0x7060db72 0x7778befc 0xe028fc55 0x52e86278 +- 0xd0b00188 0x6ed5565a 0xb5e2785c 0x3608bffa +- 0x55c3f5a3 0xe1e41afa 0x08a227fe 0x94c793ce +- 0x650934f7 0xddc36524 0x6dac40de 0x9eec3ceb +- 0x8fe3d1cc 0x3cebab86 0x61e4d63a 0x5382ea11 +- 0xa90c9495 0x0277ccb3 0x412cecc1 0x5853c945 +- 0x97df9a48 0x364d9b10 0x7e8c9bf1 0x6b4974ef +- 0xd3dbaeeb 0x6626dd26 0x2b746d2c 0xfb762155 +- 0xf942f687 0x1317d1b5 0x0c989def 0x5f4c0ed6 +- 0x31aebbd3 0x51cd8d5b 0x3d729511 0xc07c8f23 +- 0xa7f3e6f7 0x7683dba9 0x5f051d5c 0x750437f5 +- 0x1b9ffe98 0xa4de609b 0x4c498e9a 0x18dfc535 +- 0x376c6c34 0x19a57039 0xa70e93eb 0x7e966bc7 +- 0xb6e9d77a 0x3ab98e5f 0x1607125e 0xe8845aa3 +- 0xa20a2d80 0xb17ac63b 0xa07a9790 0x71e5a14f +- 0xb6b5fc78 0x4c610f86 0xb57b21b6 0x1bcfb3ac +- 0xbf812998 0xd429986b 0x02b837e9 0x0823aca8 +- 0xd8a85194 0x708bad39 0xff94ef19 0xc3599461 +- 0xaee622f6 0xa8b5a808 0xf801b298 0x0aeb35b7 +- 0x4db4bf27 0xfa31c205 0xa047dc66 0x7e0ae406 +- 0x2ceea6cb 0xef0ef96f 0x4cc4fdba 0x6161256f +- 0x94505fd1 0xbced5596 0xbf9e36a5 0x271e68bd +- 0x7a3308b6 0xef1af50d 0xb55ede06 0x6783e602 +- 0x1152acf0 0xdc644ccd 0x1b692da3 0x59f6886b +- 0xd7236158 0xe39d75a6 0xe7026697 0x25496283 +- 0xb6b0a61c 0x09d0931c 0xe8d459a1 0x1a124097 +- 0x88e50621 0xf2ed18ff 0x37681783 0x4afa1ffc +- 0x8a96ec4a 0x4474a860 0x274591b1 0x59df3968 +- 0x34f56fb9 0xce821f96 0x7ec825b2 0x6ed4a9bf +- 0x687253cf 0xa511c1d3 0xaf2bd6f0 0xd1ce1a5c +- 0x241dd505 0x39037238 0x0c761934 0x53181db5 +- 0x11ad47ec 0x915a527b 0x748bc970 0xeb8f2669 +- 0xb8bfd5af 0xd8d19145 0x0361ff58 0x6dc6e2f2 +- 0x1fd06556 0x120db4c5 0xbd704c8b 0x70a1a57c +- 0x27543851 0x095403a6 0x28171887 0x640e7c92 +- 0xb48fd7d1 0x62ad2774 0x224767cd 0x347b8843 +- 0x821ca7f3 0xf94749c6 0x2bc7f40f 0x700cc1d8 +- 0x50d50832 0xc2f9465c 0xa6e1cbaa 0xe0f5e934 +- 0x7f33617f 0x8876cb07 0x408c24fe 0xc0cfcdf7 +- 0x39152b72 0xa0ba80ab 0x301a73eb 0x6e704f6c +- 0x3b73c24b 0xd433f861 0x43192007 0xa56d2ca4 +- 0x2d28bd5d 0x14f4c9cd 0xb7fe189c 0x031e1818 +- 0xf8f4133e 0xdc8e7727 0x4f8f5a06 0xe7b114cd +- 0x5cb9ff12 0xdb4c5a53 0xed956df5 0xf3634f5f +- 0x6cce1cc2 0x5393f9ac 0x1184c2f7 0x0b6fd240 +- 0x64771374 0xaafed1a1 0xbdc55bcf 0x976414ef +- 0x6a333e56 0x0c5cefb2 0xff2574e0 0x11b059ef +- 0xff8b7f2a 0x9651e97b 0x594fe89b 0x7be60f6a +- 0x7b7695ac 0x612036f7 0x5be0d4fa 0x25855737 +- 0x12e32ee2 0x8e86130f 0x46d75d41 0x3769d438 +- 0xd14752d4 0x1612ad6d 0x8f86f2a0 0x63e01251 +- 0x9a44ac4a 0x49fdb148 0xe1757062 0x42798804 +- 0xf21f46c1 0xed0a3794 0x5528add4 0xeddc0c90 +- 0x7f188ce8 0x59568b7a 0x8e25d50f 0x9277c492 +- 0x955c6e6a 0x79f94a59 0x3a65fb08 0xceb23267 +- 0x7d8dce01 0xd15c492d 0xa35f005c 0x0e7cba9a +- 0x950485d9 0x2d92e448 0x4aced016 0x0d10136d +- 0x3d2ec365 0xd982e881 0xe81940d2 0xb1a84849 +- 0xdb30d967 0x9f51d3d4 0x4fbe18a9 0xef21cd28 +- 0x5d3cba6c 0xaa89b02b 0xbe1e9526 0xa20a918e +- 0x0c26bd72 0x8372eff8 0xcf7ab414 0x1d3ab83f +- 0xfd2c8f79 0x4929f77e 0x2416e8df 0x65dcaaca +- 0x58fbf7b3 0x1c4a3089 0x9bfb6e26 0xc7338ac9 +- 0x88e5ad26 0xc62bb3d4 0xad6d36f5 0x6445167d +- 0xe9de8daf 0xc391c6bc 0xa78b4558 0x0216bcdd +- 0xbd4365b9 0xb0a874b2 0xe95e9453 0x77296b9a +- 0x49803c1e 0xc01fd0ed 0x165a9d5d 0xf7da6442 +- 0x4c00818d 0xaad5bfca 0xdb252937 0x0e4e0f74 +- 0x0c2738e8 0xd075b8ba 0xe3b2df11 0x8aee60a4 +- 0x36052cd8 0xb4aa190b 0x413e7155 0x3e7e646d +- 0x807e6eea 0x97993e6f 0xa5129ff5 0x98e01bca +- 0xa8bd70c9 0x8800721e 0xb3407ffa 0x266b2f99 +- 0xd9da73ee 0xa06f634a 0xcaae53b1 0xd98e53c6 +- 0x49368291 0xc89485fe 0x938a8a29 0xb57f77cc +- 0x58c867de 0xcdac8a84 0xf4d57b6f 0xc6daf080 +- 0xe3d9c67f 0x0264b194 0xc3b2ca50 0x6d214667 +- 0x88503872 0x549ed8cf 0xe827689f 0xcbe94e2e +- 0x4a02516d 0x24ddcfa1 0x3cbc736e 0x34c88707 +- 0x9f4c9376 0x4ced4d41 0xfdbabfb5 0xafd291d9 +- 0x2fa602a3 0x53e19d9c 0x44422427 0xf85e2c53 +- 0x40e91ef7 0x02646045 0x3d1fa703 0x1613b99f +- 0xa108de10 0xf9cb3d04 0x7b9f9523 0x007d74b1 +- 0x961771dc 0x2e49fe1b 0x5fefe27d 0x54737b43 +- 0xa11d7c40 0x7f0cc2d9 0x67c6533e 0xd1ab10fa +- 0xb1950645 0x536087d2 0xd6937b40 0xc35960c1 +- 0x2df0c356 0xecb5ab53 0x61e08998 0x1671bdd0 +- 0xd72935b5 0xdf1a9d7c 0x70b1aa4e 0xa9272818 +- 0x1f7b8d55 0xc7292a0f 0xda7af847 0x190076ad +- 0x58370ba6 0x3020fb4e 0xff8a4b30 0x13818958 +- 0x6ba1ca38 0x6a90d39b 0x5e180929 0x206e8a22 +- 0x0568f241 0x5f83ad21 0xef05e5c6 0x21d0521c +- 0xe7886eff 0x68eebbce 0x550c1659 0xa0843444 +- 0x19468c2b 0x539cb9b8 0xa4b18b62 0xdab0680e +- 0x1b254dbc 0x47068aaf 0xa8193743 0x44b60b88 +- 0x90c07337 0x2e55666a 0x632f4b23 0x68af10db +- 0x8e29f54b 0x5f436bcd 0x8bf81d55 0xb640ccc5 +- 0x2e4ab6a9 0x198697a5 0x8a1c8481 0x572fb679 +- 0x7597c416 0x608fd45e 0x57c8c7f4 0xe151d349 +- 0xed9e17bb 0xa66f2816 0x8175fe68 0xd57d91ad +- 0x79df0711 0x7a349868 0x13403cd4 0x7d974c60 +- 0x8860ce70 0x2e6d62ea 0x8916e2f2 0x0e336838 +- 0xf54d382d 0xc4e172c8 0x94bfcfbf 0x5fa53172 +- 0x2933cecd 0x4d5b8439 0x0ca0e6e4 0x8ef87b00 +- 0x2fdd121c 0x24beae76 0xa85b47f4 0x4e38af2e +- 0x12b8734a 0xf698abf4 0xde2c2d93 0xeb100795 +- 0x8ab19df8 0x93a6f4d1 0x43c4b2cb 0xbaff7c4a +- 0xf52b1471 0x72804f4f 0x0c0ca257 0x1dc24c77 +- 0xbad7203b 0x3a998fa0 0x9cb20388 0x7ef1fb3b +- 0xbae66020 0x9a22144f 0x39ac47db 0x3f145996 +- 0x05a32b6c 0xd201a2ec 0xd868727f 0x08b2df4f +- 0x4583bbfa 0x9a422baa 0xa6a2e8f5 0x236310ec +- 0x5aafc3cf 0x344156a6 0x6f964ceb 0xed0495ae +- 0xb5638c98 0x2c8e84ba 0x63d8c7a5 0xec956b66 +- 0x69c54f32 0x767874ec 0xe8fb6ce1 0x68b1c780 +- 0xe4b861e4 0x2787cc38 0x4b2202e7 0x23b476be +- 0xecdf296f 0x094aa000 0xe95ef073 0x4182ebb5 +- 0x30daa31a 0xef68cb68 0x2fbcf6bc 0x21c52620 +- 0x19abf83e 0x4de7528c 0x05fe4c05 0x32c2a1e9 +- 0x8c23abdb 0xabba9a90 0xa6a215c1 0x891f915c +- 0x667cd65a 0xaa5a9b2c 0x689fd1e9 0x42b52c95 +- 0xd9872e76 0x05dd5278 0xc19798f7 0x8d031d86 +- 0x25690670 0x165f4b19 0x76b51d6f 0x61cd8232 +- 0x7b530271 0xa8e9326c 0xd952e94d 0x56a7021b +- 0x128be860 0x4da40144 0xeb4ac3d5 0x82b7ff5a +- 0xea2abda7 0x690a9ebc 0x33562378 0x6bc91b2f +- 0x46134185 0x8fb77fb2 0x029518a2 0xe1fa1f4c +- 0xf78783b9 0x5d8ebe63 0x103e8050 0x924085bf +- 0x80593f2e 0x5be4bcb6 0xcb935edd 0x882d0a5f +- 0x7deb8205 0xcdc0fe2e 0x9c333db4 0x1d0c888d +- 0xf8dc3575 0x2f901125 0x6bf48cdb 0x98ab6fb4 +- 0x491d7df2 0xa064922e 0xbbb86c70 0x88aad77d +- 0xfcff0669 0xb0c47c1c 0x0fcc6fe1 0x50df8a83 +- 0x014460e4 0xb014e6ab 0xbeff4bc5 0x8d939fae +- 0xd750ae17 0x42dd29c9 0xdb1cbf70 0x82265be9 +- 0xd11afd6a 0x21834e1c 0xd11e3c3a 0xbe568139 +- 0x6cf92d50 0x9304ebf1 0xf177046b 0xa5b127a5 +- 0xfb57e4a7 0xf94291df 0x0f089d58 0x07395b5f +- 0xde4ba5b9 0xf7371fc5 0xae44f190 0xd529271d +- 0xbcaea246 0xfa777c0b 0xad3bab9f 0x0d6251ec +- 0x6f4fa894 0xc39273e2 0x7710fcc3 0x81f08a5d +- 0x395b54ee 0x87295638 0x57398bb0 0xfd46c7c9 +- 0x3f1dafc6 0x548479b7 0x37c42fba 0xa2130147 +- 0x99dc0bb0 0x3596c5cf 0xbcca6bec 0x418735ed +- 0xfcd4273d 0xee141135 0x8457cf47 0x95fe7220 +- 0x041aaf8a 0x6e947153 0xc963afa7 0x09390a74 +- 0xc40dffd3 0x4208039c 0x319b1f84 0x42b6b3b7 +- 0xade789da 0x83338c91 0xf2d74712 0xe80011dd +- 0xdd61645e 0x286fc63a 0x26e2fb23 0xfef2b4ea +- 0x3290efb8 0x595a0c17 0x6cd9bea9 0x7be1338e +- 0xe0ff2c09 0x1b93aea5 0xbbd97e91 0x5e1ae1e7 +- 0x7c6c078b 0x0b9b3a03 0x43d38011 0x824cd94b +- 0x9725170d 0x87ce6f33 0x60525d85 0xc0a5e853 +- 0x242e613b 0xebf72857 0xcb500fc6 0x0de5c3f0 +- 0x382b625d 0x08840e50 0xcef30663 0x1bc848b6 +- 0xefa78141 0x81b860d6 0x4eb125fe 0x7e125296 +- 0x276a5558 0x45caa775 0x7c6ec23c 0x5dcddd08 +- 0xc41aa32d 0x6a2851b1 0xb69ae1c1 0x8f603c43 +- 0x763497f2 0x73344cbd 0xcffd175c 0xfccf5a91 +- 0xb2318bf7 0x66ac628f 0xa98fa975 0xb68e5426 +- 0x27555715 0x5157a93f 0x666fd404 0xb37fcc40 +- 0x563b0512 0xb70f8446 0xe10d257f 0x73793ef2 +- 0x31a84915 0xe0de9489 0x08dfa368 0x9169d4fd +- 0xc14f5c9a 0x92e6db4f 0xa30b6cec 0xca04670e +- 0x8a664367 0xe8984e70 0x1c96a39c 0x655f9abd +- 0x6999a190 0x76267621 0x0f49f963 0x8ddad3a1 +- 0x51fdab6a 0xaf0d6863 0x23b71bdb 0x32818c8a +- 0x6398044d 0x26c60bec 0xb0b631fa 0x938f69c7 +- 0x52f11913 0x1e6fbe7a 0x92dcd409 0x419bfeae +- 0xb147bb96 0xbac5bf9d 0x08de155a 0xde8ca968 +- 0x20aef902 0x62df25a8 0x64a4042f 0xef19da4e +- 0xc75fd112 0xc9863e47 0xaccfdbcb 0xd29b6090 +- 0x6dc67b4a 0xa84b3cd6 0x45a0e708 0xd28673bd +- 0x00bebebe 0xd5e518d7 0xc63d647c 0xa28f5f6d +- 0x3372edc8 0xa1c44ed1 0x88e61d44 0x5e095835 +- 0x2d8713ce 0x6791a885 0xae89c04a 0xf1dc5105 +- 0x6423f3b7 0xf4e2f384 0x2d2761a7 0x38ea905d +- 0xa263d776 0xd1936fa6 0x2fc54081 0x429a25c2 +- 0x13f6c5df 0xffffa6c1 0xfaf82002 0xe4bbb103 +- 0x2fc0c622 0x669ee281 0xec785fda 0x91156b25 +- 0xa9f4444e 0x354fdfc2 0x7c5f5069 0x72ae591b +- 0x73bfd64e 0x6b96d744 0xf261daaa 0x2de15dae +- 0xedaba9c2 0xf287b3fd 0x8b2097b6 0x589934c0 +- 0x7edc2a73 0x469b16eb 0x247b9a22 0x8b7e6c7b +- 0x3e71ffe2 0x5275f242 0x032a211f 0x977bff60 +- 0x4306ad03 0x6a212383 0xceb36448 0xa2a79209 +- 0xe3842f42 0xcee0cbe7 0x37cdb626 0x29a0a515 +- 0x2857ead6 0x981d5d9b 0xf0ff9b06 0x95de8cad +- 0x4dcb565b 0x065d585d 0xe7eb754b 0x278fa774 +- 0xe4d8fb7a 0xe152f018 0xfb7bb25e 0x50323b64 +- 0xba618e43 0xf8cb1c61 0x1b6dce25 0xb4fc7867 +- 0x2a7fb213 0xea9e646e 0x3f9b735b 0x5640315d +- 0x0793ba5b 0x71ff31fb 0x4b41f1d6 0xb1538146 +- 0x336f4272 0xf176d509 0xb7fc03c5 0xd6a1c927 +- 0x56a68c10 0x8b4740cd 0x14c54f8a 0xf07ad8a9 +- 0xa8403db8 0x37c23f2b 0xdca69aba 0x4b39ef9d +- 0x2af13bdb 0x6baace1f 0x8c7ca0d2 0xba86bd02 +- 0x2a74681c 0x5542ae58 0xc36709e2 0x82b34568 +- 0x26ea06be 0xd4bf458c 0xde209de7 0xa311b4e5 +- 0xdc00e139 0x7d305958 0xc5d76ed7 0x0943a285 +- 0x48ce4e29 0xe371bd9a 0xfe6a6501 0x4167d215 +- 0x402e47ba 0x588458be 0xbf4bcf37 0xf7fa27a8 +- 0xb725f91a 0xc17f5c07 0xce771dbe 0x66f9d592 +- 0xe8521ed4 0x42f75171 0x343b3e74 0x2d5448b5 +- 0x2d1fca8c 0xd7a32431 0xc29a88d2 0xffb07fd7 +- 0xcca0333f 0x43204f2f 0x866c1867 0xcb215814 +- 0xfcb67d4f 0x423680be 0xdf22f6d6 0x03373eda +- 0x3bd202e3 0xd8972fe3 0xb7733d70 0x7a472c76 +- 0x6cc8a627 0x3b27e643 0xa3475f3f 0x87ffb286 +- 0xf823d69f 0x6d57c38e 0xa0fd464e 0x53e2e341 +- 0xaaab23ef 0x439429ef 0x55ba2a2b 0x4da5ea4c +- 0xc1fe05fc 0x874b7a34 0x9a875956 0x713ccc90 +- 0x49afcff2 0x5905dc0b 0x1f5dddb7 0x8ef5c1d9 +- 0xf60eca50 0x25172569 0x3525639a 0x25804bbe +- 0x5729cd49 0x17f84e66 0xc540d86d 0x51524bc9 +- 0x9a6e9901 0xf5bcc70e 0xf7a73ffd 0x54509c8f +- 0xec58b8a4 0x9993703b 0x6ef45fc4 0x5ce3a507 +- 0x1d73c611 0x8780e8ff 0xc7d2e02b 0x0bc825f2 +- 0x02f75fca 0xe80c0758 0x24646fe9 0xd378ff5a +- 0x592c5619 0x6c80372e 0x1f7351d1 0x4db5182d +- 0x3985fdfb 0x16ca9158 0x58ee1ae4 0xaf2b9fa0 +- 0xe97f60ce 0xbb911e68 0x01748fa0 0xaef578d3 +- 0xc3736418 0x8ab0deb5 0x0de16af1 0xb8369f7b +- 0x68e43c12 0x914ca0f6 0xe950ef28 0x834eff90 +- 0x51adb952 0xc42ee4ce 0xf70ab4a5 0xbf9fc916 +- 0xed9444b1 0x845a6a1e 0xf92e7b64 0xb9ca8a1b +- 0xa9cdfcd0 0xb5956bc8 0xb8520e59 0xdde7aa57 +- 0xb41d390f 0x364aef3c 0xf39d4482 0x8b4e651e +- 0x0b82f5fb 0x7960e81c 0x12ed7b84 0xe9f123ca +- 0x88a64db2 0xa0c714cb 0x57b01471 0x80ff31a6 +- 0x7571d8cd 0x857035d9 0x0508587c 0x594a4a42 +- 0x011503e5 0x27c75e55 0x03264f62 0x9316ed1d +- 0x36e5cd1e 0xfa9b23b4 0x5bc8c606 0x0902bd38 +- 0xd6745c69 0x6fa73118 0xa50f7b94 0xc529e962 +- 0x28738486 0x7b85a599 0x2c495a35 0x85f2cbef +- 0xa09dfe51 0x1c763ab2 0x4effdb5c 0x506586f0 +- 0xec182a58 0x45293146 0xaf8d78b8 0xa89bd228 +- 0xec24826a 0x752cc421 0xbf36aa46 0x6760e225 +- 0xe15d0987 0x6fa9bdf3 0x6837c755 0x9426d654 +- 0x14b48f5b 0x5d70567d 0x63a14f92 0x809d5361 +- 0x3b6e2729 0x84ce5415 0x7eaca6e0 0x9b467302 +- 0x8f39d484 0x8e78398c 0x33108b33 0xdc07005c +- 0xbdc2500f 0x35f1f452 0x9d254e3d 0xfa61eb21 +- 0x2ab6c7aa 0x83561fdc 0x8735d598 0x416e8591 +- 0xfe10e93a 0x18da409d 0xab6d0bfd 0x675baaf1 +- 0x287fdd24 0x6b50b63c 0x8c08abca 0x871a59c9 +- 0x41bb2ae4 0xfba9abdf 0xb46491c7 0x4e433d5a +- 0x01e4fbda 0x0bc40399 0x3bdb61c2 0x3cf051ba +- 0x910daa46 0x8d4065d6 0x270667eb 0xf6d42459 +- 0x01993a1b 0x00a95dda 0x6ed5a693 0xed4fbf7b +- 0x24dbb70f 0x67fd62ee 0xcef5f0a4 0x9e65b798 +- 0x9a9913fd 0x3d0e7190 0x4265b4e4 0x80bfc46f +- 0x6b354d2c 0x2b90a987 0xc989cb75 0x773e6b64 +- 0x55325e9f 0x18816a56 0x07413406 0x5177ae31 +- 0x24a19ef7 0xdac405a4 0xdca2d3b4 0xab7c7b70 +- 0x42b5de0e 0xfcf918a5 0xa54d934b 0xcaa9eab6 +- 0x50e63e2a 0x4b168926 0xb2442913 0x594c0f94 +- 0xf387f31f 0x4d716749 0xc8433297 0x34c1a5de +- 0xe929008e 0x5644251b 0x736476d0 0x0d00aee7 +- 0xf20b2f64 0x5e158173 0x9af3e568 0x5f19fa7e +- 0xb23b2861 0x8659ee6e 0x94058a64 0x66ec4fb1 +- 0x37cd6a4a 0xbd2944fe 0x0ea44ec6 0xe7d64c24 +- 0x75a170e3 0xb4a9479c 0x2215716a 0x64a8a574 +- 0x257e86ab 0x86bae993 0x3030352b 0x15cb88bc +- 0x576363a0 0x61138c36 0x7cc4fe7f 0x648977a8 +- 0x0ef71fec 0x1c60df47 0xc75f70ea 0x88509798 +- 0x172b407a 0xf888e400 0xef33cd15 0x5976757d +- 0xf8cfef13 0xbf024380 0xbb9c1b02 0xe4c38ec9 +- 0xf30fce01 0x8efa5213 0xf4b48aad 0xc94c3a37 +- 0xeb1bcece 0x09a18b56 0x4e83c0d3 0x6fcf9f77 +- 0xf52f4d76 0xf3368a12 0x33b2797f 0x627b6e41 +- 0xefd05154 0xa83ae2a0 0xea211129 0xd25723d5 +- 0x7bbb0e3b 0x7131f088 0x5dd5193f 0xef5aa905 +- 0x39f77be7 0xa21b48c1 0x1ded01c1 0x5cf98c5f +- 0x6e23d207 0xd7e7dadf 0x5932ed1a 0x2a729061 +- 0x29a89f4a 0xac0e8447 0x01ff4205 0x8b1456c6 +- 0x3fba0156 0x658c03f7 0x5c69f968 0xf6570582 +- 0x21bb0145 0x8683bf5b 0xa4b6eba5 0x4ccfe5cb +- 0xd202898c 0xbd2411cc 0xc2fc702a 0x5c39b695 +- 0x87584ccf 0xeae3c735 0xc472b6f9 0x4249f637 +- 0x3fa89c0e 0xce5a8bd7 0xbb28138b 0xc080ecb1 +- 0x9cbf1916 0xd70424e9 0x75cc4ed1 0xa575f3e9 +- 0x1c571f68 0xe2906205 0xc26520cf 0xf9c1fc8e +- 0x61c982de 0x1af6cfcc 0xaf397c9a 0x46830771 +- 0x623d98bb 0xda7b52fa 0x5a3c57d3 0xfa35d2f0 +- 0x4783df19 0x6ad07325 0x487406f4 0x3fae5152 +- 0x189137cb 0xd98a644e 0x17ffe880 0xeb6aa9f7 +- 0x67184e3e 0xe475734b 0x0f1113c2 0x39a4df47 +- 0xbf8f6ec9 0xe13a4d8b 0x63ec02f5 0xdfe7d75d +- 0x1379034c 0x5db7314a 0xa9d9ad3e 0xfaaed8f2 +- 0xf0fb6074 0x12f27b84 0xc97a92bb 0xae5e3bb7 +- 0x5f7fc2bf 0x00cbc1f7 0x9360a4d9 0x3632ba04 +- 0xad044c83 0xeda13ec1 0x34a214c0 0xcf9c972a +- 0x96352243 0xf1a35357 0x2d77bc30 0x8485bbad +- 0x67fbaa99 0x8035b1a5 0x8ca763c0 0x109d7887 +- 0xa1c35cd8 0xdc79e308 0x4495404d 0x64419226 +- 0xacdcea08 0x9545c0ef 0x5493e09e 0x7fe16336 +- 0x41381aa2 0x5c344f46 0xb40cab9f 0xc43951c4 +- 0xd86e52a5 0xb141d934 0xd78efcff 0xf37ec320 +- 0xc184a45b 0xf4a57954 0xc8aed0bd 0xe602c15a +- 0x71a6b48b 0xce837428 0x02733706 0xc4a4a044 +- 0xa75efb97 0xcb63d62e 0xd0580b5a 0xce499087 +- 0xc12bf4ca 0x9c995345 0x1d8adfbc 0xe62fd60e +- 0xccbf5412 0x6161f8d0 0x64268e34 0x565d066b +- 0x1896b63f 0x838f8f2a 0x1e314a00 0xac470276 +- 0x1879cfdf 0x4702d7f9 0x83b4d777 0x81fcb068 +- 0x1b6da94d 0xd075ed01 0x3c7734e8 0x56389a0b +- 0x0743b9cd 0xb6b0bf0d 0x63107ab9 0x193172bc +- 0xc7b84c8e 0x982ce2aa 0xb8e387a6 0xc264a4b0 +- 0x2ac6c802 0xb89ea335 0x052332a4 0x49932ecc +- 0xb940f808 0xa7a09330 0x19f3f49d 0x7aef6b5a +- 0x201d8ed0 0xf29aac4b 0x8ae2ac0f 0x998c1ca7 +- 0x665c3927 0xab4ef641 0xf136710d 0x9644ee9b +- 0x34efae96 0x4c596035 0x8cfe8b3b 0x5d9f742e +- 0xab2c63ca 0x017d864d 0xd0604d6e 0xab24eee0 +- 0x75916a9a 0xad0d1167 0xbeb47775 0x6ac822d1 +- 0x776907aa 0x9e9377f2 0x438c5d81 0xd70e9964 +- 0x1c09c914 0xab90e5cf 0x31cee523 0x26ba6ea7 +- 0xef00781d 0x622b886d 0x36a54031 0x88b1221c +- 0x666333f5 0x60e1c93e 0x5e4d0e0a 0x3ee6ff69 +- 0xceb4c76b 0xa5deb4f8 0x0668ced8 0x30225378 +- 0x6697cf37 0xc5d9661d 0x089eab85 0x7684a876 +- 0x018a81af 0x221a7fb2 0x31d80de0 0x9f18ae90 +- 0xa29c9af0 0xc3e2b00f 0xda0edbab 0x7ee9cd2a +- 0x3ab0f88e 0x02c58228 0x606fa7aa 0x7776cb0a +- 0x4e8ad99c 0x3b527469 0x58123d62 0x4ce428d2 +- 0xee91a210 0x466ba2cc 0x043c57b9 0xaf7bdd43 +- 0x98e76fee 0x8f3eac1b 0x00dffd6c 0x6fcb1c6a +- 0x5cb90573 0x485d4505 0x0df5418a 0x26eafe35 +- 0x0faddf3e 0x4e972930 0xe113c823 0xe45944d1 +- 0xa646077f 0xc1708ae5 0x6ba07c20 0xc7e4e234 +- 0xc6754ed5 0xbd6e85aa 0x8cc1756e 0x02afda29 +- 0x72809597 0x75b6f5a1 0x61141874 0x1774047f +- 0x7a10afed 0xfac2c4ad 0x42cf5c99 0x24f0350e +- 0x042f2864 0xfab55b67 0xc8ead5bc 0x914e9512 +- 0x77c8ef6b 0x8369aeb1 0x71bc947f 0x0c6b49d8 +- 0x8ddd0513 0x028ad10d 0x99a1b28f 0xe6cfbdc8 +- 0x7978b4a6 0x3ebbade8 0x9985f5cf 0x431f42f1 +- 0x004372b2 0x18b67f68 0x20111c21 0xbb6f77ff +- 0x1783b030 0xa045d7d1 0x0e9c7e09 0x3ccbd95f +- 0x0b84a2ed 0xf0ee3325 0x63f2e126 0x5ec4c67b +- 0x2ca782cc 0xcaf20d04 0x8b59d515 0x3212aa33 +- 0x335ca0c3 0x6f9e0cdd 0x4d4bf189 0x44d2fa0c +- 0x5abe9396 0x492794ee 0x10dcfcb1 0x9acda9bd +- 0xe8aa2803 0x3f1b9605 0x3e2ecb5a 0x971bfa8a +- 0xcbf141d2 0x0afafe10 0x2fc906a6 0xefad20c0 +- 0x9e922581 0xe69142cc 0xc9c0ba82 0xc069e640 +- 0xb99c08b6 0x4b62ca1f 0xf3c5767a 0x6ab088c7 +- 0x8f0f0c0b 0x6726f64a 0x9711a3cd 0x46462571 +- 0x3a58350e 0xa2561911 0xe24dfdfe 0x97443fdc +- 0xf80540be 0x069978bf 0xb38a359b 0x8e574f62 +- 0x69aea75c 0xdc753fcb 0x2a74002c 0xced027b4 +- 0xda993254 0x03409b83 0xf827331d 0x75fb3271 +- 0x01ad839d 0x68520842 0xca65c45c 0x1a3db5a0 +- 0x91d37dd3 0x6168c0fb 0x935f5a08 0x002007c3 +- 0x42eb4760 0xdab3a804 0x72a6297e 0x905c32d9 +- 0x81abcfa9 0x1b21d04a 0x5a1289ae 0x424e7183 +- 0xc207906c 0x31fe9134 0x5eb2e5af 0xc9253fc7 +- 0xc32be24f 0xe5474cbd 0xeff6e1b0 0x710e5e69 +- 0xe6c4c538 0x96b5f1de 0x2abc9c35 0xddbd1a92 +- 0x8aca40d7 0xe359c238 0x954718f4 0x18b157e5 +- 0xeeed790e 0x6948a963 0x24e70bfb 0x4d681547 +- 0xf68369a7 0x5b54409a 0x1f0b787a 0xc2610047 +- 0x0f8bd269 0xd7c8c154 0x9dee62d9 0xd4738ed8 +- 0x1a66c6b1 0x5bad5a5b 0xb110311a 0xfaec6802 +- 0x6b750f2d 0xcbf8d0e0 0x11edaf4b 0xf64a07bb +- 0x422e7c15 0xb1732663 0x1ff404f0 0x2d5052b0 +- 0x6e45356c 0x7e2201e8 0x7c5ebcd1 0x1cb4425a +- 0xb1539a64 0xa2e4459f 0xcf1ade8a 0xfc476473 +- 0xf4147deb 0x2afbdd77 0xff01fabc 0x6597408a +- 0x0951220b 0x6750f3ec 0x0a242763 0xf3d71c05 +- 0x84cb1c26 0xdb7a81bd 0x7aea1a5d 0x7e719a48 +- 0xc5c12fe1 0x0ce2e988 0x29ecc6f0 0x5ede901a +- 0xda8399b1 0x31c05d6b 0xe1956aff 0x59ed7c3d +- 0x60832637 0x9bcb7cac 0x63c530d1 0x14c677de +- 0x9225ed18 0x065327c9 0xd1ff6a0e 0x5516517e +- 0x53c6f5c2 0xed5983cf 0xaa1d18b9 0xbe300d7f +- 0xadc525a7 0x07ea81b6 0xfc517a09 0x4ead3f86 +- 0x45435f41 0x2efa58df 0x02348ebc 0x30ed6783 +- 0x190b4fb9 0x85c55d6e 0xc9ed8896 0x416ee113 +- 0x9b3536d9 0x30577cc0 0xbc4b88c8 0xcda59612 +- 0xdfe2bd89 0xd60cde71 0x98843881 0xcc1f32f2 +- 0x18b3f643 0x671a14ca 0xd6482a47 0xac6a7d38 +- 0x1897da16 0x91b6fcb3 0xf199bb35 0xd38c00ba +- 0xa8c946b6 0x52a1ad37 0xd38ed2d4 0xa1d6f81d +- 0x5af6865b 0xebdb858f 0xb844b110 0x53201ea2 +- 0x08870945 0x10c869de 0x19849613 0xdb35d3ed +- 0xd68ebd6e 0x1056fd48 0xf1a0e305 0xe3982ebd +- 0x6f7cc391 0x5956374a 0xf414a5a2 0x325119ab +- 0x99ee1f96 0x6f044bd9 0x8374805b 0xb55c366c +- 0xa2c77051 0x68f199e5 0xd36a9714 0x878f847b +- 0xec0394ae 0x86d0584b 0xf4df66b9 0x451cd039 +- 0xf4de06ae 0x35dd0554 0x818a342f 0xeefdbfc9 +- 0x5b4e9edd 0x22d9313a 0x3b710d60 0x6deaeb4c +- 0xa9e26512 0x98d31867 0x3c2c2d61 0x7eb5ce41 +- 0x40890db6 0x7a3aa660 0x3ef4f306 0x7322881f +- 0x49dac4d5 0x96efe685 0x27bb7f49 0xbb955283 +- 0x79c5f2b7 0xff599c28 0x28ee7f5e 0x9f324b73 +- 0x45edb7cf 0x39a8b79c 0xd0919c6e 0xe149b29d +- 0x62f5f82e 0xebcfa23e 0xd4d68937 0x54270090 +- 0x958af0d4 0xa1e4e799 0xaf68ac19 0x82a84f4e +- 0x50f67b84 0xd5e59629 0xf5fdf24c 0xab1d63c5 +- 0x30835807 0x431fce5f 0xe5f96f4d 0x3f6b4802 +- 0x14010be8 0xdca45ae5 0xc82709af 0xff76ce2c +- 0x8b222c22 0x73a2d948 0xa8d59cea 0x8c31849e +- 0x469c2e5f 0x3777ee84 0x5fdfa5da 0x02ef9bb2 +- 0x792d3194 0xbed63f21 0x0b6dc5f1 0xc9d7fe08 +- 0x6df7883d 0x366566cf 0xef772769 0x37826465 +- 0x1cdc3086 0xa69ff7b6 0x235012ea 0x292f7e75 +- 0x30bdd0fd 0xffdc9df1 0x95c6d570 0xec206204 +- 0xc6cd42cb 0xc0d6dfd9 0xb7a16b71 0x17fa527e +- 0x295f2c79 0x990f9820 0x8b8f447d 0x193f9ad1 +- 0xebddb2af 0x5dd532eb 0xf1bbd8e8 0x3444a3f4 +- 0x18ccce93 0x05edeb4f 0xc4a6b935 0xba37aab0 +- 0x96076ba4 0x250dc2f7 0xc4093548 0x030e777d +- 0x7ea40933 0x8da7b1dd 0x59c0b79f 0x807d437c +- 0xf5233ddf 0x54c1983f 0xfc18771b 0xe74b85f0 +- 0xdbd725b5 0x70cdd153 0x4ffe300c 0xfda4bdae +- 0xf4ac75d2 0x91c4e15a 0x34d92b97 0x16356a79 +- >; +diff -ruN u-boot-2015.01-rc3/arch/x86/dts/Makefile u-boot/arch/x86/dts/Makefile +--- u-boot-2015.01-rc3/arch/x86/dts/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/dts/Makefile 2015-01-01 17:34:32.253503252 +0100 +@@ -1,6 +1,7 @@ + dtb-y += link.dtb \ + chromebook_link.dtb \ +- alex.dtb ++ alex.dtb \ ++ crownbay.dtb + + targets += $(dtb-y) + +diff -ruN u-boot-2015.01-rc3/arch/x86/dts/microcode/m0220661105_cv.dtsi u-boot/arch/x86/dts/microcode/m0220661105_cv.dtsi +--- u-boot-2015.01-rc3/arch/x86/dts/microcode/m0220661105_cv.dtsi 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/dts/microcode/m0220661105_cv.dtsi 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,368 @@ ++/* ++ * Copyright (c) <1995-2014>, Intel Corporation. ++ * All rights reserved. ++ * Redistribution. Redistribution and use in binary form, without modification, are ++ * permitted provided that the following conditions are met: ++ * .Redistributions must reproduce the above copyright notice and the following ++ * disclaimer in the documentation and/or other materials provided with the ++ * distribution. ++ * .Neither the name of Intel Corporation nor the names of its suppliers may be used ++ * to endorse or promote products derived from this software without specific prior ++ * written permission. ++ * .No reverse engineering, decompilation, or disassembly of this software is ++ * permitted. ++ * ."Binary form" includes any format commonly used for electronic conveyance ++ * which is a reversible, bit-exact translation of binary representation to ASCII or ++ * ISO text, for example, "uuencode." ++ * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT ++ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER ++ * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, ++ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ++ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * --- ++ * This is a device tree fragment. Use #include to add these properties to a ++ * node. ++ * ++ * Date: Sat Sep 13 22:51:38 CST 2014 ++ */ ++ ++compatible = "intel,microcode"; ++intel,header-version = <1>; ++intel,update-revision = <0x105>; ++intel,date-code = <0x7182011>; ++intel,processor-signature = <0x20661>; ++intel,checksum = <0x52558795>; ++intel,loader-revision = <1>; ++intel,processor-flags = <0x2>; ++ ++/* The first 48-bytes are the public header which repeats the above data */ ++data = < ++ 0x01000000 0x05010000 0x11201807 0x61060200 ++ 0x95875552 0x01000000 0x02000000 0xd0130000 ++ 0x00140000 0x00000000 0x00000000 0x00000000 ++ 0x00000000 0xa1000000 0x01000200 0x05010000 ++ 0x19000000 0x00010500 0x15071120 0x01040000 ++ 0x01000000 0x61060200 0x00000000 0x00000000 ++ 0x00000000 0x00000000 0x00000000 0x00000000 ++ 0x00000000 0x00000000 0x00000000 0x00000000 ++ 0x00000000 0x00000000 0x00000000 0x00000000 ++ 0x9557a557 0x7d7a0fe3 0x8e2fbe53 0x0db9e346 ++ 0xd35c00d6 0x21bb34b7 0x662b6406 0xa0425035 ++ 0x3d028208 0xcb843695 0xee06be0a 0x9817efa7 ++ 0xb86c0d16 0x45f70c93 0x79fdc3af 0xd5f30da7 ++ 0x460f62b0 0x238a0470 0xf0ec95bf 0x97b9c176 ++ 0x6d612851 0x69b9b4b6 0x1df769cc 0xe11674df ++ 0x1b579adf 0xc8bcc050 0xcdb3e285 0x327592c1 ++ 0xbeb6047a 0x977f6be5 0xc4854052 0x27f38b66 ++ 0x4ca5eab3 0xf806decc 0x2be4b409 0x460a3b03 ++ 0xde2f6e0f 0x53ce08b3 0x3ef0ef93 0x4e013088 ++ 0x226f8a5c 0x57f7d291 0x8d640bf7 0x8a998907 ++ 0x40464dd8 0x804ef3e5 0x647e35f3 0xeabee2d1 ++ 0x3a5ce9c7 0x4d7ee530 0x564321ec 0x9e85107e ++ 0xd595581d 0xcbf6efde 0xed3010ed 0x3d607e82 ++ 0xe32d4b6b 0xd06fec83 0xf39240a6 0xe487988d ++ 0xddbefcbe 0xefaf1121 0x96bf9acb 0xacce795c ++ 0x7fa5f89b 0xbe440e5d 0xb6d3a3dc 0xcad17290 ++ 0x503ae748 0x04c80b8d 0xd394ea6a 0x3e4072c3 ++ 0x11000000 0x0b0ae65d 0xc6c53cbd 0xd52a6c2d ++ 0x84cc192f 0x89498e7d 0x89270686 0xe68105e0 ++ 0x4073a570 0xd3338d8e 0x51193152 0x7266182f ++ 0x980553fa 0x51b89c90 0xd13b6151 0xe6e40a91 ++ 0x0ab997d8 0x2d0a443b 0x9d3d566d 0x820402d1 ++ 0xdbe79fcc 0x7c5e0b45 0xaf94216d 0xbf717950 ++ 0x520b3dd4 0x566a3396 0x0b6f794f 0xc5dfeda5 ++ 0x71ba0f02 0x4839a5ed 0x39a4e4a6 0xe567c652 ++ 0x0e044997 0x84a0effd 0x09c67178 0x89a815c8 ++ 0xac821555 0xd6719303 0x582b964e 0xfe3a53f6 ++ 0x241b9b8b 0xc6e65457 0x623a4e0a 0x590d7d03 ++ 0xe50e7ce1 0x4bca4700 0xf24f5eff 0x1f1b20d9 ++ 0x77e3227e 0x699b5e5d 0x9aa5f621 0xff08bba0 ++ 0xf17ce716 0x0f5336f5 0xbce055a7 0x8cea9dac ++ 0x8e09d26c 0x66c3ddf0 0xbec71660 0x75248cd2 ++ 0x29afcf8d 0xa5ade5ce 0xf68bace5 0x63b513cd ++ 0x4736a842 0x4dbf80df 0x4e85fbdf 0x4dce3d56 ++ 0xf2150fdc 0xc4232709 0xffdc3e3a 0x92b72a3d ++ 0x9ffce715 0x682959d1 0x091ba33c 0x0f1dc729 ++ 0x2f29a924 0x1df72429 0x19b0365d 0x2d5a3cd8 ++ 0x20617351 0x109074f9 0xf232874a 0x40d79569 ++ 0x97dbe4c6 0xa3b66845 0xa04d2faa 0x6dce9a96 ++ 0xd4963c67 0xd4516f76 0x64a0b04d 0x0b87ddfe ++ 0xd8a5305d 0x717ecf67 0x77189035 0x40542ed4 ++ 0x5a180ff1 0xb2042e2c 0x6639819b 0x0f0756c3 ++ 0xf939bd70 0x25efe0d6 0x3eb65ae9 0x39a057d2 ++ 0xb2595655 0xf808b4fd 0xe22d0593 0x76256500 ++ 0x0eeee6ee 0x6895d1cf 0x9fc117a7 0xd19e5f15 ++ 0xf677f085 0x1ecdb30d 0x704d0975 0x9099f42e ++ 0x421be0b2 0xd02548bd 0x3a16e675 0x7d8b051d ++ 0x9d24480f 0xbc006432 0x184da9ec 0xbad7abef ++ 0x299f58aa 0xc1a249fa 0x8d9d31f3 0xe73cda17 ++ 0xf41ac993 0x7b88d3bb 0xf349c676 0xb8341361 ++ 0x1b69bc01 0x98e0bfd2 0xf31db8d9 0xeb49b275 ++ 0xabc40133 0xfb7d0701 0xcd5ff353 0x4eaceb8d ++ 0x67aac555 0x6d81693b 0xe81c555d 0x5d7f3688 ++ 0xd4347083 0xcd861b1d 0xd332f2cb 0x43130028 ++ 0x7f1a1c51 0xe2ce3af2 0xdff5076e 0x6ef21237 ++ 0xf65fc8c4 0xbd28ff14 0xd70f49a3 0x4f559249 ++ 0xd6fe7530 0x1fe89b4a 0xc1cc8975 0x2fd705c5 ++ 0xf2993d77 0x60f2e3da 0xe3ca3c44 0xbd0f70b1 ++ 0x0d333d10 0xa29a6aa1 0x43b5a6d4 0x30d15a08 ++ 0x6df9564a 0xea09045d 0x54ca3f5a 0xfbcfa037 ++ 0x6dd64d1b 0xa4a8995c 0x1f4298f0 0x3f4d9a86 ++ 0x924ee146 0xc2e3f464 0xc247747f 0x8bf5c7d7 ++ 0xf8f0b05d 0xf65a115f 0x4b1ae4e5 0xe131e187 ++ 0xfaf713c1 0x5ff88660 0xcd4916b0 0x448028e0 ++ 0x140711ca 0xffe77575 0x8b7740bd 0x82b6ed95 ++ 0xd94d9647 0x2623c011 0xd54fba11 0x30a7050b ++ 0x28fe4069 0x70b8bf7d 0xf786eb6d 0xe39db734 ++ 0xa3290669 0x8747e1d6 0x35804a42 0x1c26ed60 ++ 0x30a8880f 0x8170a277 0xa1d97657 0x6ebcb3ed ++ 0x3bb6ce89 0xff808c1b 0xc919fd1e 0x911d8b14 ++ 0xcbf41a24 0x82abc738 0xfb5e988e 0x328aa123 ++ 0xf19146e3 0x587baa80 0xd105e811 0x83b09389 ++ 0xa29fc554 0xe3831a28 0x183f8de7 0x4ef5656e ++ 0xcc940baf 0x938bf4b4 0x90627bae 0x14fc3cdb ++ 0x75e45681 0xf912c1b3 0x7a5b8a0f 0x3b970524 ++ 0x6a74d34a 0xb3da9fe6 0x847a3bd8 0xfc4f7dd6 ++ 0x88fd7f3b 0xbcd74a15 0x3afed836 0x17e31cd0 ++ 0x5d866dcb 0x0ab69608 0xe334f0fb 0x7181d4a3 ++ 0x8dc87560 0xd9c94d6f 0x491c2c91 0xca295ed6 ++ 0xfb8dcd79 0xeb4d3f89 0xec581071 0x0457ebc6 ++ 0x6b63590b 0x9dde4b79 0x3dc0a0aa 0x41ec8a1e ++ 0xfb2ab80e 0x07adc629 0xb8534a4f 0xd0d23901 ++ 0xcfd024da 0x47c4163a 0xc89d26bb 0xe5cac48c ++ 0x17c7fbba 0xd992f42e 0x466f5e35 0xce48304e ++ 0x394683c8 0xef6e6b7a 0xb9d1242d 0xb961debd ++ 0x432a3dff 0xa4931ea7 0xd9f03907 0xc29e9ce6 ++ 0x4fccf4c9 0xbf234555 0x0b6a6771 0xb29f29ef ++ 0x7edc4bfd 0x781dcf74 0x4ae31020 0x1ab72d9b ++ 0x0ac457e2 0xf9291e09 0xd4084918 0xa540d999 ++ 0x223408d3 0x0bd039aa 0xaf0dd904 0x9cfd6a01 ++ 0x826c6bca 0x8e41a96d 0xa56fc4ee 0x6a7509fb ++ 0x5cd2e6fc 0xb89aa158 0xb1e5d3f5 0x92ccd05e ++ 0x995d5acb 0x5ed1dc08 0x75038dac 0x4377c835 ++ 0x265d66d8 0x3692096f 0xcd69ee59 0x310df351 ++ 0x087e3133 0xe89e2d58 0x137fd054 0x00f3562b ++ 0x2ae304e5 0x9db0316d 0x6868cec6 0xb249ccec ++ 0x9f602c90 0xd3715e7c 0x3fcc8a62 0xa1c1e065 ++ 0x5b4281d4 0x124dfd7e 0xe9d21462 0x77cbc940 ++ 0xf915f2a5 0x66df82fc 0xa8c67c56 0xac4d461b ++ 0x836deb52 0x95fbb48d 0x3454b6bd 0xd87d7a64 ++ 0xe64d32b8 0xc44c2aa0 0x3e213c1f 0x4d31b94d ++ 0x4640be5e 0xe127234b 0x9ca54856 0xac7d093f ++ 0x03d0508b 0x30f5121d 0x6e347d91 0x47772312 ++ 0x318ea26e 0xad3f6902 0xb5598746 0x8be3b65b ++ 0xc8bbd31d 0x24691564 0xee77d2e8 0x3581944e ++ 0xeff8eed5 0xa29ea86c 0xc2597492 0x23c1c118 ++ 0x7810c079 0xb966ee47 0x823e9954 0x9e558c0a ++ 0x74759c12 0x193c6b4e 0x7544597d 0x65c9bf8a ++ 0x68f5e263 0x718c679b 0xc8dc50ba 0x5f5ab841 ++ 0xc3eaf579 0xc2072358 0x62481939 0xffe7e686 ++ 0x201f3215 0x1d88dc8e 0x28fb4002 0x40c56ec5 ++ 0xb7bcce00 0xd52f5042 0x84498e04 0xcc97fb7d ++ 0x64035e93 0xcd3478a4 0x15d63309 0xa9e47b85 ++ 0xe835e45f 0x9de598b7 0x94f569f7 0x56689b0c ++ 0x381f9173 0x708b3e52 0xc81f0649 0x12113041 ++ 0x4694aae2 0x69040fc0 0xe4ba7bf4 0xfadc5729 ++ 0xc168381f 0x1985f118 0xab0ca720 0xf0150799 ++ 0x42690e4a 0x71af3be9 0x9325f3b8 0x36575996 ++ 0x4dc1dca7 0x7e534c37 0x01830a21 0x221eef4f ++ 0x18698322 0x57a80837 0x483ae2d8 0xef905b54 ++ 0xe01827de 0xae9a8ff1 0x0058be7b 0x052632ad ++ 0x9df5c90b 0xb763fc7a 0x5535c95c 0x8eb5916a ++ 0x75fde5cc 0x57d8eeab 0x0dcc35c6 0xbf11c88f ++ 0x69142118 0x4f35c928 0x7966066c 0xb2d13b4b ++ 0xdad06d34 0xb5d8f5c7 0xe0bb11e6 0x8a36325d ++ 0xc1122d64 0xcf07a1a5 0xfe7ce9b1 0x176b624b ++ 0x4de883fd 0x00a9024b 0x3d3f7271 0x5072895d ++ 0x2634e158 0x2f3c9a35 0x95e374d1 0x65e66528 ++ 0x47766433 0x4cb805ff 0xbc8f0319 0x6d5055a5 ++ 0x4932e8c2 0xa93fbb4d 0x87f08bd9 0xf5e5706e ++ 0x409af40e 0x017edf5c 0xc5394c71 0x6fb97b6d ++ 0x7b5ddb6b 0x0256adfe 0x76d337e2 0xa3327113 ++ 0xfbb4cb29 0xea68ca27 0xa76a865e 0x8cdb2dd3 ++ 0x902642bd 0x16772269 0xb2341eaf 0x858fa943 ++ 0xb087fac9 0xd17de85b 0x3d9c248a 0x0bdcf2d0 ++ 0x874fc03c 0xf19f2591 0x190c06a9 0xc6b5c3ea ++ 0x472b6245 0xdb9f8201 0x46d27a0d 0x52218ffe ++ 0xece78c44 0x3ef6e38a 0xfcf19b65 0x536c840c ++ 0x86d363e8 0xaa852826 0xde17e3ec 0xa9c3b45b ++ 0xd322302a 0x48f03728 0x2f60d01a 0x3b356752 ++ 0x8a869fd4 0x055d04f4 0x765074fb 0xb0b5c2d1 ++ 0x865ad360 0x0cb6c6e8 0x5de9cf99 0x863938d3 ++ 0xd4d9aeea 0x0babfa86 0x172cfb57 0x972d8f4f ++ 0xe9aeeb95 0x6acbe297 0xf2459e42 0x415fdd12 ++ 0x84b2e67b 0x47d2d466 0x44bc85a4 0x1a55b957 ++ 0xe4d01142 0xbf4ea387 0x5651e1a2 0x19124703 ++ 0x8aaed1b2 0x841f3ecd 0xc6d6cc4f 0x1f2d8565 ++ 0xba08e74a 0x68e5ecf4 0x07af5ef4 0xdd5a43a9 ++ 0x6086c705 0x37ced045 0x0fb05ca6 0x35f39f3b ++ 0xda1ecbef 0x1daf6d76 0x5481d7ed 0xc51e8385 ++ 0xa705e11e 0x127d2a7f 0x654d4710 0x1a34370e ++ 0xf8496ea4 0x4392b6ec 0x2f209933 0x9c5ab017 ++ 0xa4f7b837 0x33e0a7d0 0x98fb0635 0xdefc042a ++ 0xc7a1f6b5 0x47107766 0xd06acfba 0xb8ac2a93 ++ 0xe21cca44 0xf0150492 0xd4de2e01 0xe0d6e9a5 ++ 0xa758b5df 0x2e1c31c0 0xc4794495 0x3d9cc157 ++ 0xf94aa4f7 0xc2325855 0xcf9ddd12 0xaa70e611 ++ 0x2b2404b8 0x75d87f38 0xa2a6f772 0x61abfa04 ++ 0x23b61fb0 0x87f4067f 0x355abf99 0x2c4e6c48 ++ 0x2dc8a3b2 0x119b08b5 0x3f1f6d09 0x374372f0 ++ 0x24d79d32 0xef2b58be 0x461ab91c 0x1d31267e ++ 0x8b1b2c7e 0x27a4f103 0x1686c7c3 0x55af0d87 ++ 0x61c2503b 0x9ffcca7f 0xc3cbdd07 0xd49a4f3c ++ 0x9ddc2ac9 0x335e1b2a 0xd8dcfc08 0x6e83f11c ++ 0x53de9e30 0x7b774670 0x15a97571 0x1ecacf66 ++ 0x26581520 0xeee3496b 0x1fdf8174 0x4ddd3c61 ++ 0xaa504fc2 0x0b09792e 0x9b81d1c7 0x10765c95 ++ 0xd3e7b9d1 0xefdb38f9 0x4c44d38e 0xaaf8fd08 ++ 0xceb22e7c 0x5ac74242 0x6baee02d 0x5c7eaa5b ++ 0x27265dca 0x614c3b5e 0x2994874d 0x486d48a3 ++ 0x5945c4f9 0xe465f343 0x934e55de 0x633199a2 ++ 0x147222cc 0x9bbb0c16 0x6a7e7ef1 0xb7bce9b5 ++ 0x13413d18 0x628231af 0x0fd2d58c 0x4cbafba0 ++ 0xa930fae6 0x91733823 0xe06f99c3 0xda3b57b7 ++ 0x04b8a9dd 0x53451e33 0x11fde5fd 0x0e35bcb8 ++ 0x3a5799d4 0x3893f9c0 0x6b9d0e1d 0xf8d948ce ++ 0xa33a6628 0x7d09792d 0xd74b3719 0x0afb4de0 ++ 0xfaa5a685 0xecf7f8ac 0xcf34b855 0x89453b4d ++ 0x12f028c3 0x45edc3fd 0x792c43fc 0x2b054962 ++ 0xb8799a92 0x0ab38d61 0xa6c6a76d 0x7670cdbd ++ 0xf878b511 0x9a3474ba 0x478673f0 0x7398bba8 ++ 0x4fa10ff5 0xf0a1931c 0xd5938e03 0xe9a23c28 ++ 0x7bea2a5b 0xf7a8db22 0xb94ae0e3 0x2abe6385 ++ 0x0ef2cc36 0x6b997544 0x1e8cc4f1 0x69a5b182 ++ 0x54f9b7c7 0x8fe56cba 0xc7c12fcc 0x8d689865 ++ 0x2d6ef011 0xc6a1b740 0x66af0a76 0x76018cdd ++ 0x30661377 0xcf1fcf93 0x08046423 0xdf9371c8 ++ 0x1795ec3e 0xf5ea09c6 0xe462de69 0xd7da78a1 ++ 0xd8bda1eb 0x1179f53a 0x2b394767 0x3ba153a7 ++ 0xf9c85bd7 0x5700c827 0x8478ac99 0x080a2f52 ++ 0xdd1c18f1 0x579cea67 0x345c56ce 0x4563f16a ++ 0xfa1a5b74 0x0b6e233e 0xadc7bd9a 0xbee6d2f0 ++ 0xa249f3ef 0xcdea9b77 0xeaaed82e 0xcc4448a7 ++ 0x34f7cafb 0x7621bb44 0x4965b0eb 0xe6d6b8bf ++ 0x3c683b25 0x33bcb5fe 0x3f376249 0x5b40dc67 ++ 0x658bf6aa 0x7f0c5d0d 0x61514591 0xeb3bb83f ++ 0xc2e208dd 0xe82f08f2 0x6ef75ae5 0x9c11bc0d ++ 0x289c0553 0x1578ce5d 0xb7f05c0e 0x818c5ebd ++ 0xe566ec9b 0xc6995b3f 0x0c02aac3 0x2b4264b3 ++ 0xf9cad304 0x5b0479fb 0xf8ce8d6f 0xb7d80d8b ++ 0x41a0d223 0x71ec8a7a 0xc9d74d41 0x245c5988 ++ 0xf607fc59 0xf1c7b6ab 0x142ef712 0xbf607800 ++ 0x281e5911 0xad9a3e63 0x87b59384 0x7ebdc04c ++ 0x6f47867b 0xb6a304ac 0x289f65e7 0x335fc866 ++ 0x77eb11b3 0xb70c25b2 0x70b43d52 0x684d46c0 ++ 0x0940459b 0xde739ede 0x0b438a29 0xb713e77e ++ 0x71f539b7 0x8b2f0f7b 0x8d8ab95d 0x42cde8c9 ++ 0x08c259d1 0x021eda69 0x2af81ddc 0xc7d13028 ++ 0x05abfa20 0x6a61008b 0xfc62557f 0xd6d731b2 ++ 0xb080aca3 0x6acae4a3 0xab33d2bc 0x7983c177 ++ 0xdf0c357d 0xb8dcb956 0x9c214460 0xfeb75d75 ++ 0x9b3d468b 0xd2c3106c 0xb1bd118e 0xf26df6a8 ++ 0x11b9c4d2 0x031357f9 0xf7af8a12 0x70fef26c ++ 0xe5d8b8d5 0xf6746fd8 0xd6cc3266 0x4158e59f ++ 0xa38fbfcb 0x01c61ff6 0x44c7c4e6 0xf26db3aa ++ 0x46bb6d84 0x0a794535 0x1d5eab72 0x42345de7 ++ 0x0c7e6d47 0x8bacc223 0xb7334b8d 0x3d9d951b ++ 0x18f4afc4 0x9c0cb708 0x53b71b82 0x603e8350 ++ 0x6f2df978 0x0c6f3f0f 0x661ebca9 0x30788bd0 ++ 0x982959c0 0x50aa1351 0x672297c1 0xa490a756 ++ 0x21c9e911 0x977e172e 0x0446db50 0x49b711c1 ++ 0xbc6d54c7 0x0fe0adb4 0xc4ec0fe4 0xae6d09b6 ++ 0x316cfa53 0xba68cc8b 0x104bdbe9 0xc31639a3 ++ 0x812a97fb 0xa1c6884b 0xc884d473 0xe3057c15 ++ 0x5ee879a3 0x5abe8262 0xb906bbde 0xfd98fcbd ++ 0x6ae15c96 0x44a17e0e 0x28acfa15 0xb345122c ++ 0x6ddc4244 0x005eb369 0x22d038bc 0x0d226e4f ++ 0x64c7ed6c 0x7964b8d9 0xbc5d668d 0x99155e56 ++ 0x9979151c 0x65312a00 0x0271d338 0x64867293 ++ 0xed0d26fb 0xe69c5f02 0x93fd6871 0xf5702656 ++ 0x4fad1c2b 0x20f8c272 0x438b964a 0x87ff3fa2 ++ 0x6706537a 0x437b5709 0x6fb797dd 0x85679fab ++ 0x00da6b51 0xeecc5540 0x2998791c 0xc36d40ef ++ 0xb545e334 0x9ace5e06 0x8a9e6c54 0xc341d0cd ++ 0x1478a2d4 0xb81413bd 0x80601f72 0xa1b250b9 ++ 0x1cb7f5ce 0xefad630c 0x32325fcc 0x29e3474d ++ 0x6a7ae043 0x879ee630 0xdc1e8a55 0x7ae794a8 ++ 0x4ee38039 0x2ff4947a 0x53bb84b1 0x8f0b077d ++ 0xaa4c543b 0x9aa88443 0xeb31a017 0xf3485983 ++ 0xe53b855c 0x6e17aec6 0x726458a6 0x5acf4345 ++ 0xa1b95c5a 0x30668c67 0x47fb5dc7 0x8aafbff4 ++ 0x4b94ef01 0x07bd6231 0x544afcf3 0xfdffca2f ++ 0xce847471 0xe90abc6e 0xf05e3cc1 0xf602a9c8 ++ 0x8f104b51 0x1ae3da07 0xd07dfc04 0x561d9373 ++ 0x6f6cc833 0xac982489 0x3c0f8afd 0xfab974d0 ++ 0x397e135e 0x8edb3eb4 0x452b9509 0x3972829d ++ 0x639e3981 0x1c758ec1 0x11428fa5 0xe8308fa7 ++ 0x571d71b9 0x94e40c2b 0x1aaaa397 0xce9283ae ++ 0x599bbb93 0x51c04bf7 0x556bc74f 0xf6e6e799 ++ 0xc34191e0 0x5f06bce6 0x9f63ecd1 0x54437905 ++ 0xf8f9bd50 0xde82cbf6 0xe11a9949 0x9d312bfa ++ 0xe712e3db 0xb57eabc9 0x57682068 0xc91c2e3c ++ 0x681e4fbd 0x0ecd3452 0xcc893248 0xf13f0600 ++ 0x9a8a9194 0xb4c1cd29 0xd504d8f2 0xee6c5b8a ++ 0x211c9958 0x7a4f9c30 0x32775708 0xda97bf03 ++ 0xf7035e57 0xbe77d547 0x37accd1e 0x6c537775 ++ 0x8d63b752 0x7fec4a3c 0x94211d9e 0x60bfeb2a ++ 0xebd47130 0x747d52fc 0x8434f487 0xac9091cc ++ 0x8f8b228f 0xb77f96a1 0xc21fede9 0xa9e2678a ++ 0xbc815194 0x54d677ac 0x66c11faf 0xfb666595 ++ 0x01e5e973 0x5c990d0c 0xf2cea425 0x5b516ff8 ++ 0x8c932784 0xd18feb32 0xb5acd3d3 0x1703b89a ++ 0x34fb512c 0x0ac83386 0xd58c5728 0x5c018ed6 ++ 0xbe0908a0 0xd490b0e9 0x0ec94527 0x2f281499 ++ 0x471df723 0x03eddc08 0x9b99d975 0x11535b70 ++ 0x5802288c 0xb3512d42 0x415a9c0d 0x52dbd146 ++ 0x8b0c59bf 0xd8160cc7 0xe37dee6e 0xfd5211cc ++ 0x5635ff4d 0x8d783398 0xc11f5d62 0x54ca73b4 ++ 0xc3ebdf96 0x835e7883 0x9cd03137 0xe4b4f709 ++ 0xdbde6d86 0x2b562b2d 0xfecc0df5 0x172a5ec2 ++ 0x568b52b9 0xf542957c 0xd738b325 0x49c49aaf ++ 0x6eb4c9ad 0x363f4978 0xac4b0cb3 0x4ec8dca8 ++ 0x7a2ec2ba 0x10ff39bc 0x8b8748d5 0x6a86e67b ++ 0x0d81e2b6 0xf4bde138 0x02249333 0xab0c7acf ++ 0x4ce5e894 0x1656dad7 0x46c59329 0xa849fea0 ++ 0x3d0400be 0x6898c4f7 0xd866ff9a 0x84a5b170 ++ 0xc997009e 0x80524f6e 0xc80fb5dd 0x5bde0181 ++ 0x0bb0c8a8 0xe5a6b9e4 0xd4753f0a 0xda9bf0c6 ++ 0xd6dd041b 0x4c7338f0 0xa223bd71 0x23b58f4a ++ 0xf6e127dc 0x1777033d 0x5b057a0f 0xe08af0bf ++ 0x17c07032 0xbbc3f27f 0xac6dc98b 0x921e2f12 ++ 0xcf32236d 0x6cb700a8 0xa3b4e5cc 0xe9b65d73 ++ 0xca7d6f44 0x7b5917f6 0x7b80dd21 0x5ee87e45 ++ 0x86799f71 0x0667e036 0x8f97dcca 0xc4bfd5d9 ++ 0x90737eed 0x41b5a457 0xc6c96301 0xf8933e95 ++ 0xe51c2456 0x00c661f4 0x8a0e1aaa 0x92aa4181 ++ 0x1e3f8638 0xd481a14a 0xaf637189 0x91622fb3 ++ 0x4450865d 0x4202b431 0x5248342b 0x01ff713b ++ 0xe33b5ec5 0x912d6856 0x10deb2ac 0x9072c180 ++ 0x24d792af 0xa39c5dfd 0xb4c94140 0xfeb32004 ++ 0xa174dae8 0x49da7dfc 0xa4db1090 0x7d2a998b ++ 0xb7eba69b 0x9b824871 0x3557bd1d 0xd3a73d9b ++ 0xf225310b 0xad1ffcf6 0x2d5f075b 0x592de6f4 ++ 0x69e438f4 0x4ed8cac4 0xa79c947f 0xb95f9590 ++ 0xb8ede5c9 0x0b1c9229 0x85a4b30e 0x65149920 ++ 0x433461a8 0x186fda4f 0xbaee7097 0xd3cac1bd ++ 0x8bc32ca2 0x914f1512 0x9b619478 0x582a53c9 ++ 0x4e624a00 0x77e445ec 0x6f823159 0xa9c4766b ++ 0x0dd6ad28 0xfabdadc5 0x704bfd95 0x08645056 ++ 0xe1939821 0x76650b62 0x8876941a 0xf812239f ++ 0x2869ce13 0xa4d292c7 0xecba40fd 0x83d2fd8f ++ 0xdd45ccc0 0x7c12b7cb 0xdc0a20bb 0x0d9be34d ++ 0x4dd16a9d 0x25835446 0xb94d8c21 0x97ca8010 ++ 0xddd09324 0x95ffe31f 0xa86136c9 0x828ac571 ++ 0x9aa7fc00 0x382cc48c 0x015f7186 0xc3fd040d ++ 0x505408e0 0x21cdc34c 0xbd266059 0x6e2f673e ++ 0xe4523c1b 0x3ba56bb3 0x1c343938 0xabc0df54 ++ 0x8ba4f1e8 0xfbd4c592 0xb678c884 0xff3be2f1 ++ 0xca013570 0xfb0598df 0x3cb9cc1d 0xe3ba8ca3 ++ 0xc3d7ecee 0x0ae84a0b 0x0d70f0c3 0x963110ff ++ >; +diff -ruN u-boot-2015.01-rc3/arch/x86/dts/microcode/m12206a7_00000029.dtsi u-boot/arch/x86/dts/microcode/m12206a7_00000029.dtsi +--- u-boot-2015.01-rc3/arch/x86/dts/microcode/m12206a7_00000029.dtsi 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/dts/microcode/m12206a7_00000029.dtsi 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,686 @@ ++/* ++ * Copyright (c) <1995-2014>, Intel Corporation. ++ * All rights reserved. ++ * Redistribution. Redistribution and use in binary form, without modification, are ++ * permitted provided that the following conditions are met: ++ * .Redistributions must reproduce the above copyright notice and the following ++ * disclaimer in the documentation and/or other materials provided with the ++ * distribution. ++ * .Neither the name of Intel Corporation nor the names of its suppliers may be used ++ * to endorse or promote products derived from this software without specific prior ++ * written permission. ++ * .No reverse engineering, decompilation, or disassembly of this software is ++ * permitted. ++ * ."Binary form" includes any format commonly used for electronic conveyance ++ * which is a reversible, bit-exact translation of binary representation to ASCII or ++ * ISO text, for example, "uuencode." ++ * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT ++ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER ++ * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, ++ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ++ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * --- ++ * This is a device tree fragment. Use #include to add these properties to a ++ * node. ++ */ ++ ++compatible = "intel,microcode"; ++intel,header-version = <1>; ++intel,update-revision = <0x29>; ++intel,date-code = <0x6122013>; ++intel,processor-signature = <0x206a7>; ++intel,checksum = <0xc9c91df0>; ++intel,loader-revision = <1>; ++intel,processor-flags = <0x12>; ++ ++/* The first 48-bytes are the public header which repeats the above data */ ++data = < ++ 0x01000000 0x29000000 0x13201206 0xa7060200 ++ 0xf01dc9c9 0x01000000 0x12000000 0xd0270000 ++ 0x00280000 0x00000000 0x00000000 0x00000000 ++ 0x00000000 0xa1000000 0x01000200 0x29000000 ++ 0x00000000 0x00000000 0x11061320 0xd1090000 ++ 0x01000000 0xa7060200 0x00000000 0x00000000 ++ 0x00000000 0x00000000 0x00000000 0x00000000 ++ 0x00000000 0xd1090000 0x00000000 0x00000000 ++ 0x00000000 0x00000000 0x00000000 0x00000000 ++ 0xfd2a2f68 0x82ac7ebb 0xa4916328 0x7480b81b ++ 0xd329a777 0x25750339 0x9a8f7a9b 0xf1da9cb8 ++ 0xb1be7b1a 0x621d5a35 0x94b57e2e 0xa9def809 ++ 0xe4492a43 0x530252bf 0x1040fada 0x8a853a89 ++ 0xfb0e6e76 0x6d191ed9 0xefd28b83 0x946414e5 ++ 0x13f415d5 0x28487029 0xb69855e8 0x516cbedc ++ 0xfabbea88 0x9f90e8a1 0x211793d8 0x54653835 ++ 0xa7789a08 0x754791d9 0x484764d4 0xdca45615 ++ 0xf64844f4 0xdbd754d0 0x7d2b0ff3 0xd023e25a ++ 0xb048bbcb 0x83038b5c 0x57e17d17 0x735f1e9c ++ 0x8982c22e 0x6c7b2ad7 0xb26e3b82 0x7121e035 ++ 0xe4ea8dba 0x68d4f406 0xaaafdb13 0xf119b472 ++ 0xb5853303 0x20698005 0xcf34604c 0xdc17d19b ++ 0x042d6e97 0xf0300325 0xe1b55072 0xc2804918 ++ 0xd6d7a912 0xf908c81b 0x4f9979ae 0x0179f8c6 ++ 0x2f13e3c0 0xc5911467 0x39ad6c23 0x9c9d8837 ++ 0xf3c3f767 0xe56b4a96 0xdad7cebc 0x6eaaee57 ++ 0x2215ca7b 0x4cee4f65 0xd9a51c2a 0xf33c80a1 ++ 0x11000000 0x0b468bda 0x0b57c7cb 0x885fad4b ++ 0x8a37307a 0x68cc7d5b 0xb6395b55 0x583626b8 ++ 0x21efe98d 0xa516cc42 0xf5b978b1 0x585d8a11 ++ 0xdd5f2ee4 0x17b1c7eb 0xb6f005ea 0x9ecc6ac6 ++ 0x82c0f1b2 0x25a114fb 0xa6086296 0x93da75f4 ++ 0x0695ff88 0xd413dd65 0xccf7609e 0xb7718aa8 ++ 0x334406dd 0x28de253f 0xfb43ca83 0xa4674656 ++ 0x7392e05f 0x9b062c62 0x17571892 0xb5811cbf ++ 0x9d64666b 0xa01c1500 0x5893e418 0x07ba6ed1 ++ 0x0eebedd8 0x299a52bf 0xdfdb6191 0x4e846b26 ++ 0x298b7431 0x576f4479 0xf5317e04 0xc9492745 ++ 0x167c42e3 0x0c0cd705 0x82756ce5 0xe81ba860 ++ 0x536c357c 0xc27433fa 0x41c8078f 0x1ff779d0 ++ 0x73ddd76d 0xe606c66c 0xe0ad45bf 0xfebdc310 ++ 0xcb2aa836 0x39903a79 0xe53d5dc1 0x0cb6a1ff ++ 0xe6091d08 0xcb2961d8 0xd38987ff 0x2bd624fd ++ 0xfb4e484a 0x8c60efbb 0x0ed088b5 0x5a142b04 ++ 0xa737bab1 0x44da29a2 0xc046ecb1 0xe7ccefdc ++ 0x81895d2d 0x41266fa8 0x52a5e25e 0xcfeac133 ++ 0x252b0737 0xec54b6c8 0xe1c9ebf6 0x25180c1a ++ 0xea65b9e2 0x5e9ada96 0x08559e07 0x414fcece ++ 0xdb4927f7 0xa229106d 0x6a7db273 0x8ac6a901 ++ 0x00a87e4d 0x14fd1e2a 0x63a5fa87 0x5ca223c5 ++ 0xc0c980c1 0x42c447ef 0x5b274187 0x75bd6279 ++ 0xdb44dae2 0x60856af1 0x777caf5f 0x298e810a ++ 0x93f4f418 0x9e1ddf3f 0x6f589046 0x18ea149c ++ 0x4a5ce4b0 0x529db285 0x3c2dde59 0x1d680e51 ++ 0x3a62d819 0xdf4c01d2 0x432a8f06 0x70a37043 ++ 0x4a0d4baf 0x0d3395be 0xfce0391f 0x5228aac2 ++ 0x9dd9b00e 0x6149f393 0x6fee1d85 0x1d3628cb ++ 0x107076de 0xd99fe940 0xa227eec2 0xc97d8119 ++ 0xcf2fa8b2 0x821dac93 0x518875f2 0xd18d1d47 ++ 0x3e27fdcb 0x47823f98 0x20d42c1e 0x9a58812b ++ 0xe0987435 0x1426f12f 0x61d6f627 0x5c58d415 ++ 0xe5ca80de 0x9e11e526 0xbccc0f94 0xb49cec4d ++ 0x357f947c 0xbef0e2f2 0x5b9b2596 0xddc87ff7 ++ 0x5f2705f8 0xa25f2be7 0xbb45a165 0xe49ef6d5 ++ 0xe76e250a 0x75584c7d 0x7900da7b 0xee0e3360 ++ 0x6988740c 0x4aa56944 0x2d485383 0xef45f5d5 ++ 0x0df4b0f7 0x48199182 0x5b33c21c 0x8f2483c1 ++ 0x8aae6c50 0xaf406ccb 0xb7522bda 0xeafb64de ++ 0x9a9b1fd7 0x3ab46c34 0x0ec5f025 0xe5bc9668 ++ 0xdb108e78 0xd6152ac8 0xc382ec93 0x5abc2565 ++ 0x4f256030 0x856f6eb5 0xb589dc96 0x3de80942 ++ 0x49d20a05 0x8e3ac21b 0x0262ecc7 0x5f1bce89 ++ 0xec50198c 0x0115b078 0xf67d94e3 0x1cc3682b ++ 0xfb2d4ab0 0x4d6ce252 0x1d7aace9 0xf7e99257 ++ 0xc1235e85 0x8129ee72 0xb6cfbb13 0x6b851ab5 ++ 0x430633d1 0xe9ed33e9 0xfe85a42a 0xb4583c0a ++ 0x35a65f5e 0x5fb0bc81 0xe16db440 0x7d022cf2 ++ 0x8f832920 0x20ed9ad4 0x6a4ace8b 0xf4c85869 ++ 0xf17dd57b 0x277ae0d5 0xb5f59c50 0x35d099a5 ++ 0x9ce955ae 0xcb200000 0xcedc4073 0x2a2ba8b2 ++ 0xa1b53439 0x46ced775 0x59069604 0x6488f5d8 ++ 0x2bc0af55 0x643178a2 0x36f62be3 0x2606f0a1 ++ 0x3057cf8a 0xc28f4a3d 0x708e8020 0xb3fccf9a ++ 0x29b79fa7 0x35622d93 0x85eb0e68 0x80fa3b59 ++ 0x143f340f 0x20e17166 0x169fe55d 0x698f3655 ++ 0x0bc8b45b 0xde3aaf6c 0xbd597266 0x75505401 ++ 0x44d0095d 0x4c00f346 0xfb9ef2c6 0xee70ef96 ++ 0xae807621 0xfbbe7490 0x9c0a283e 0x01a8058d ++ 0x1be53568 0x0b8dc8a8 0x45afb745 0x3ee1ff58 ++ 0xe772e14e 0x3ca4e729 0x6973e751 0x764f244e ++ 0xca8d1621 0x6c4fb15c 0xae972e6d 0x3d26c6d3 ++ 0x5ca8f450 0x6328d65c 0x2e7cd88c 0x87dddcc1 ++ 0xcbbdefc6 0x1ab8c0cc 0xd21e503a 0x20c11d27 ++ 0x2f0adc1d 0xc24240d2 0xc73aa069 0x99afc53e ++ 0xcab27e40 0xbe107ccb 0x8ad5f0ae 0x9024c188 ++ 0xe02bb39d 0xdb784309 0xf91acb54 0x4d15b75d ++ 0xd339c237 0x3b556619 0xf69f91f6 0xca6fcfd4 ++ 0xb5ddf471 0x0698490e 0xb0855c30 0xe2b34b13 ++ 0x3c979248 0xc0484a59 0xb4cf9f4f 0x7975f2ac ++ 0x602259d3 0x89364c24 0x37f29913 0x0b4c88a0 ++ 0x23f0b663 0x309c13d2 0x80a3d12c 0x4c866e87 ++ 0xea7e29c0 0xbc33db6e 0x3c3af584 0x63da0de7 ++ 0x9bc6bf5f 0x3b948269 0x4d41b09b 0x5724dd20 ++ 0x4e16618b 0x5917781f 0x4bdec762 0x562cc3fd ++ 0x50e59d92 0xb3edea05 0xa6ceaa68 0x60af473d ++ 0x78a99aca 0xd60ba313 0xe502992c 0x0c25c2ba ++ 0x476eebd4 0xe7e23958 0xc4ac2757 0x0d6695ec ++ 0x7664b4f0 0xb87ed0a5 0xdcf23b2a 0x76d38802 ++ 0x21699284 0x87b80e7c 0xf0e34f45 0x4bb84bc8 ++ 0x0316744a 0x26de0ed4 0xb25ff5e3 0x31445bb1 ++ 0xaccc5b87 0x271b976a 0xcdf5663b 0xe142d271 ++ 0x1af28339 0x7d304ca4 0x11ee6243 0xdf70fbc3 ++ 0xb8d88f25 0x4c2d9626 0x8eb72c77 0xceee1817 ++ 0x4e1b35f7 0x6c261f67 0xa32a2801 0x67ace2af ++ 0x7c87f8c1 0xca6f2505 0x982269dc 0x137080a9 ++ 0xe40fa78a 0x3897a66a 0xdc5d0ff7 0x58016e44 ++ 0x21bcc988 0xf2a4df15 0x9fb021d4 0xca59e882 ++ 0x3673d08e 0x7cf5d500 0xd41ab9df 0xc17b4a58 ++ 0x2cb85aa3 0x01103427 0x5a8fac5b 0x7ac856b2 ++ 0xb1532563 0x1b94b518 0xadea3bfa 0x597109a9 ++ 0xf28df608 0xc2bf64bf 0xf517bb53 0x61b7d5ad ++ 0xa4a38e9d 0xa9fdc597 0xf990f2f1 0x00466640 ++ 0xcecd06a7 0x5eef09d3 0xb67a08ae 0xd780d8a0 ++ 0x07641a71 0x9dc9f7b9 0x5f0b5a44 0x94dfe40f ++ 0x6db0cf7c 0x3fe72d11 0xb2443ea3 0xe051f336 ++ 0x4ec8a6a4 0x11201430 0xb44e2b28 0x5bd018b0 ++ 0x444ba2bf 0xa63031eb 0x147f9826 0x3fc56ac1 ++ 0xd3a75ad3 0xc3f71815 0x340bd72b 0x3e5a488d ++ 0x0cd8fb05 0x17791534 0x68e7321c 0x1489c701 ++ 0xa39f2d71 0x7cbbd9f9 0x42cba365 0x024f7d9a ++ 0x29ef2da1 0x1eb9c4e6 0xc8b24985 0x9c33412c ++ 0x5fd3003d 0x7f0793b9 0x497b6ef4 0x3af648f2 ++ 0x22f4a1db 0xac8500c7 0x3b1a859a 0x57921c78 ++ 0xb0efd82e 0x8e60452d 0xd86ed85f 0xc1ae73d1 ++ 0x633d83dd 0x7dbee7f6 0x46ef5590 0x027f2d50 ++ 0x3c81bcf1 0x37a3940d 0xc92d0a8f 0x270cd02d ++ 0xaeed9d1c 0xb6d76bcd 0xda27f251 0x1625a683 ++ 0xf2d1302d 0x3f95bc0e 0xdb4b36e0 0x96fe1e6e ++ 0x1dcbca54 0x57d44867 0x14aada62 0xf20f5444 ++ 0x9ccf560e 0xb8d178af 0x9affe58e 0x8e3bd741 ++ 0x7dff29e9 0x3c1998e5 0x9909e1df 0x1bbbd50f ++ 0xfda14fdb 0xb66fb65e 0xe646d5f3 0x71f41791 ++ 0xbca50c12 0x57c6d2a2 0x8f5c750f 0x48f87301 ++ 0x9103acac 0xef185c41 0x6dbe9524 0x3c040c16 ++ 0x211dc2ac 0xa61925bb 0x20bfb41a 0x98253e77 ++ 0x4d5ea3b8 0xc2b11b6d 0x7f072104 0x58340448 ++ 0x596e3090 0x72484d15 0xf5e5d16b 0xc1b9faca ++ 0x5c786fdb 0xdcd97509 0x73d21aa9 0x2a90c7ae ++ 0x396ed0b1 0xa23e63da 0xea20cb1b 0xb2bb359b ++ 0xb5df6ff5 0xdbc470b4 0xa6fd8d97 0x9458f6d0 ++ 0x97434866 0x2c9521c4 0xc51f6ad2 0xa33fb3b5 ++ 0xb26915d7 0x3ef363da 0x9ff9f5c7 0xfa236e60 ++ 0xa12b879d 0x2f98bd3b 0x95282ca8 0x64f90513 ++ 0xc03d2962 0xb13b82f8 0xfdc2eb41 0xc39dcf3b ++ 0x95a409af 0xbaba6e7e 0x0d028543 0xc5b9426b ++ 0x35f5727b 0x8f3b9f8c 0x6e7b85d8 0x2cfa9b2e ++ 0x2a7117cb 0xa41f3fe5 0xbe17ff18 0x0f4a8be4 ++ 0x20b9003a 0xebce04ff 0xd6f276d6 0x9fc66d07 ++ 0x83f40250 0x560eaffe 0x92be2ddd 0xdb0ff83e ++ 0x424f0605 0xb3cf76a4 0x167725c5 0xe3b513e2 ++ 0xc31a1a72 0x9f7161a4 0x25707dd1 0xdb5f2a91 ++ 0x85db06af 0x78443bf6 0xebbd8e7d 0x7909e5fe ++ 0x618237a6 0xe6dea70c 0xcd3299c2 0x7736d40a ++ 0x044cda94 0x6cec190e 0xb9652583 0x51946c01 ++ 0xcba67203 0x0dae0f1d 0x6d0dff0d 0x85756bf7 ++ 0x1db9e08a 0x88977944 0xa6252c60 0x06ff1a07 ++ 0x1b8d319f 0x884f10eb 0xbdeb7feb 0xe1681bb9 ++ 0xb5f0cefc 0x5359534d 0x6de87cf9 0x94a78727 ++ 0x15c17557 0x398876df 0x2f85f258 0xa0284d4b ++ 0x4879ca57 0xb5ab7844 0xb402fde8 0xd520cb53 ++ 0x8a601365 0x8853b510 0x1e0538f6 0x0135f899 ++ 0xa78c7bba 0xa33c8ccc 0x6cf0da00 0xa5f96757 ++ 0x94714373 0x79413ed2 0x27c7b9cd 0xda172153 ++ 0xeeeee91b 0x959d8437 0x660efcda 0x2a6ab94a ++ 0x8913d65f 0x24246350 0xf6c85ab5 0xf6b696f7 ++ 0xd75840c8 0x046b7435 0xb55474fc 0xd8d8bab0 ++ 0x265e79e0 0x0dd030b3 0x826a182c 0x38f1121b ++ 0xeb33b5cb 0xe3ca835b 0xe8850761 0x25955d7a ++ 0xbb6b7fb4 0xbc02ca0f 0x1b03bd1f 0xdd1a59d6 ++ 0x5d48f10b 0x35e35688 0x1411d34a 0x6131c664 ++ 0xc1b8b277 0x1bc8afd3 0x886f0c09 0xc1b6b517 ++ 0x74ec9ecb 0xee2d43a5 0xbc0f122a 0xd1911c88 ++ 0xc7e39b2e 0xa60c39b0 0x942fce7e 0xc8c2a2b6 ++ 0x51978cc2 0xad8d9ed2 0xcc2b0c3d 0xf6aff0f7 ++ 0xbfb3920a 0xd25aa79c 0x67d87d44 0xf612df60 ++ 0xf06dbe9f 0xd4ab61da 0xd96c6b1b 0xb39ab4b7 ++ 0x3368a90d 0x39c8bd81 0xf4ba5ead 0x6fe656ad ++ 0x93b946dc 0x2181219e 0x7b98805d 0x675af3fd ++ 0x59760289 0x934b4803 0x4189f27d 0x9503a5fd ++ 0x42aaa076 0x6b4bd024 0x86c826e9 0xe0370ff4 ++ 0x1bfdf980 0xc487f797 0xd4754c3b 0x1098b2e8 ++ 0x05753a1c 0x3833ede3 0x5f1065ec 0x40cb562e ++ 0x8d4fc418 0x392290d2 0x622d2e29 0x55df1f46 ++ 0x4ae0893e 0x24ddf8a9 0x302a64dc 0xc93f7504 ++ 0xde8e1674 0x033acbcd 0xc9732a64 0x6f7a7da3 ++ 0x72b7c43a 0xb5110e6a 0x00865c19 0xaf5e00f7 ++ 0x0a80b55d 0x6e638c0c 0x3771d602 0xb4a95ae7 ++ 0x01ba3cff 0x42e350eb 0xedb1d897 0x82f0cfff ++ 0x98e79055 0x6b0cc62e 0x8ce1735b 0x62645395 ++ 0xd99fc208 0x86ee3066 0xc8f13758 0x2378d582 ++ 0xad41c218 0xc3954b87 0x47acab9a 0x69126227 ++ 0xbf778357 0xc5a7b76c 0xb96894c4 0x89e2dd88 ++ 0x27cc53b7 0x2187116c 0xd397c13b 0x578a6686 ++ 0xe3e58b11 0xdc3e4d40 0x69f064f5 0xdfb64348 ++ 0x42291e77 0xacc21c46 0x5444d976 0x616bcdc1 ++ 0x01ffb3bd 0x5cb926e5 0xbd763a24 0xbf224c70 ++ 0xdeca1d57 0xded1cc56 0x9b6cbcd2 0xee6efaf4 ++ 0x44d634ff 0xf33334c6 0xd275d66b 0x6a1a4c9d ++ 0xbd675ae0 0x6289d1c1 0x053aeaf0 0x8a170aa1 ++ 0xe12cfbb9 0x0ae15a94 0x1dab08f3 0x9a2657ab ++ 0x8348417f 0x9572e6dc 0x9c69e518 0x5397dfa1 ++ 0xe46120cd 0xad4457fa 0x0106a79d 0x40b191be ++ 0xbb64bccb 0x9dda8fb0 0xc74fe994 0x64ac0ef1 ++ 0x3a57986c 0x86e8dc78 0xbb055d88 0x7a1243da ++ 0x585cafe1 0x8968ad92 0x5b73bf26 0xccf77edc ++ 0x10ac1643 0x5738ba43 0x3d39ecee 0x57fd555b ++ 0x36ee9d5b 0xec9115fb 0x4250e03f 0x9e4fd6a6 ++ 0xc547b01e 0x9c84f42a 0x37756616 0x217cb517 ++ 0x33da3c5e 0xa0a7ae6f 0x8ddb7b99 0xbd84ac35 ++ 0x644ec4e0 0xaa62a7ac 0x71795f77 0xd5f67163 ++ 0x77dcc227 0x59f09342 0xf6666ce4 0x1e164a0c ++ 0x011e205b 0xc4a80a0c 0x7fd31f1d 0x05ccae4c ++ 0x39b6abfb 0xf4b7ac82 0x39d38e89 0x14c1e7f3 ++ 0xdb3bb53b 0x02577ec5 0x7bc12087 0x65ccc2bd ++ 0x72492c6e 0xa6ae0062 0x965946ea 0x58e5f31a ++ 0xfdfd7770 0x052afb9c 0x889b8358 0x2dd65c3e ++ 0x55418587 0x445af0e9 0x43fe6671 0xae45e776 ++ 0x2c25d02c 0x44805865 0xaa3a70c5 0x7dd55d11 ++ 0x3499f5d7 0xc12e4a51 0x9ef98a38 0x5462e98c ++ 0x0f73c72f 0xd0481aa2 0x56bccd0e 0x64143a1a ++ 0xa7913ef6 0x0ca932ae 0x3739ec96 0xac5d38d5 ++ 0xe9c8c754 0xd56e855b 0x950cadcc 0x91cb2e5e ++ 0x6e170c11 0x1eb66637 0xf641b0ae 0x8ba43c21 ++ 0x3f43b8af 0x8f1596e7 0xb614d1ae 0xac99c14c ++ 0xe7beddce 0x5757f98b 0xfec1cf89 0x19608162 ++ 0x96479a49 0x1f089d9e 0xc2e4ac47 0x1cdea563 ++ 0x027f57a7 0xc0ba57c6 0x6eb2faa1 0x8e85c333 ++ 0xc391dfd2 0xe2c0bcbf 0xc1f87d66 0xb597d958 ++ 0x3655d5a3 0x2d9adaaf 0x8efd0aa0 0x05d65caf ++ 0xa28991d9 0x28b6d7cf 0xdcb48013 0x65e75783 ++ 0x8b8b77ed 0xa4b36df8 0xa8ccfb9d 0xd0a1734c ++ 0x2dc97601 0x35d81082 0x2e6d26f8 0xf3baf2c5 ++ 0x416084dc 0xd8b84ad5 0xa06b9edb 0x45c2b0b6 ++ 0x553c973a 0xbbcda1bf 0xca154d25 0x7a781012 ++ 0x4864ea32 0x0784f663 0x27656507 0xb359d4dd ++ 0x43d4c165 0x69b844c7 0x31b1b9e2 0x0f3420f8 ++ 0x3cd2e455 0x201920cb 0x93018659 0x5c4a08f0 ++ 0x3a0d094b 0x5448c1ed 0xc888d1a2 0x4826cb64 ++ 0x625da2c7 0x12110d40 0x5cd8e76b 0x26e09eb5 ++ 0x8c6aab45 0x6dd192c6 0x937f1252 0xc927efc5 ++ 0x4c5bf11c 0xdd62c6fa 0xeef59620 0xbffc2d5b ++ 0xb90299f0 0xb24df71b 0x76656678 0x550b3228 ++ 0x01536098 0x4fbfe03c 0xa82d0c31 0x2eec9bb6 ++ 0x752e6720 0x26322556 0x5d94bd64 0xa2e1122a ++ 0x25899986 0xb63d5cc2 0x9222b055 0xbf4f0bcf ++ 0x3d182483 0xc7bb9999 0x97ffc8c1 0xa6500a8b ++ 0xb8b97382 0x3f6f39b0 0xcaca9f6c 0x7b67941d ++ 0x7875ea1e 0x3ff25c0d 0x4cff1a40 0xb5a351ef ++ 0x556a59e5 0x011e995f 0x25a7a5e9 0xedc8707a ++ 0x42b4ddfa 0xa51a3ddd 0x9c9f1d73 0xc8f24ef3 ++ 0xfcd73118 0x1a61c16f 0x1e2fa7c7 0x1f49826a ++ 0xd8418fe9 0x726358a8 0x6a0857fa 0x6804ccc1 ++ 0x78a55fa0 0xc3e41419 0x60416b10 0x2afe46d8 ++ 0x0c0ba2f7 0xd3dfa8ca 0xfa474ea2 0x8e763446 ++ 0x1f664c64 0x6a8d06cf 0x1b891114 0xa27c1a28 ++ 0x98ddd324 0x26cc9fb8 0x544078da 0x03acbeee ++ 0xc3f3b761 0x56797b83 0xf04ac5a1 0x8603b17f ++ 0xb8989b96 0x28c7be17 0xb750b4a6 0x84b2f7f8 ++ 0x32138f9b 0x7661c86b 0xb7517518 0xf2a961c6 ++ 0x240a0100 0x100c5b96 0xa1931730 0x18513938 ++ 0xdf2baa73 0xd6b55cce 0xf89cab59 0x238c90c3 ++ 0x4799f50d 0x29cd7942 0x62677a47 0x7261f326 ++ 0x4ff7da96 0x294ba5e9 0xb6474251 0x96de1b44 ++ 0x9d84552f 0x1103468f 0xcfd063af 0x5d8a0b6c ++ 0x172670ac 0xc1a9b97f 0x0a278773 0x08b48bb5 ++ 0x392b3563 0x8f65e926 0x4be71f10 0x7615e05e ++ 0x98b0c931 0x50bf9779 0x5baa97aa 0xb6e26fe4 ++ 0x2c40971a 0xe5d739f0 0xa7e30500 0xc724895c ++ 0xc7a3f44a 0x5b381b1b 0xa7a478c7 0x219f567c ++ 0x42d7a960 0xaae6780f 0xa96c56d1 0xe3787bf4 ++ 0x743f3a5e 0x6b99c9e1 0x36cf72b0 0x784ab5c2 ++ 0x5113773d 0x625393af 0x62c4da61 0x05422921 ++ 0x339711f3 0x3ee04f5e 0xf3a778b9 0x55e1bcf7 ++ 0xe49e5a9f 0x5f0935f6 0xa13e17f5 0x3028d23b ++ 0xac9a6fd9 0x14006013 0xbf1b3fb2 0xce785f7b ++ 0x83942244 0xd299d59b 0xf8c0593b 0x71c74beb ++ 0x7561a1f5 0xb133ace7 0x15d5d4c1 0x21c3bb29 ++ 0x6ab1c2c7 0xee20d3dd 0xcfd62c54 0xedf9a43e ++ 0x0e23222c 0x5eef5bc2 0xe7426bd0 0x42db58e9 ++ 0x62ffe203 0xd63163c5 0x8dbbcb48 0x9e16d9c7 ++ 0xb6d51e39 0xbee5a6c4 0x5d0bd775 0xeded86db ++ 0x9eb1454f 0x6217eb64 0xa4b76ae7 0xe3481698 ++ 0x6d576cec 0xe751f610 0x1473bd83 0x4aaead8c ++ 0xff4a602b 0x01ed092b 0x310f16cb 0x2e199177 ++ 0x693a8ad1 0xf5e520d1 0x1713d604 0xfff1225c ++ 0x644c81b8 0x1adf5032 0x79058d81 0x7aafda08 ++ 0x80b6c9df 0x6f927c46 0x307bcaa6 0x0a1aac12 ++ 0x7d20bdae 0xd0e9c9a7 0x4530bebc 0xf1dbac36 ++ 0xdee3e8a9 0xa96d2aca 0x291c6944 0x436cfac8 ++ 0x9dd501c3 0x696e0c6b 0xa85d7036 0xca1c1321 ++ 0xcb802235 0xae614fec 0x4f0cf745 0x08604468 ++ 0x93bd00f3 0xf39eb605 0x89a8f420 0x18a7f61a ++ 0xa0aebc3b 0x723e6ba9 0xed00f2a0 0x231b43d5 ++ 0x37c81702 0x891ffeb9 0x122de4f5 0x90f16757 ++ 0x1eb06046 0x21d5cdd1 0x75fd0e6f 0x7d595ae9 ++ 0xeb8ed50e 0x7bfd8696 0x3b91f3e4 0xd629e74a ++ 0x1650dfcd 0xda48163d 0x2f8f5aba 0xbc40ee60 ++ 0x5291b6b0 0xb059d788 0x1ed5f092 0x65b7a885 ++ 0x44503d18 0x3a2893c8 0xaf3dab25 0x8ee0a8e5 ++ 0xf82f0696 0xf4fe9322 0x863feff8 0x2cfee629 ++ 0xacd8bcbc 0xb3791232 0xdd694c06 0x2a606479 ++ 0xaed9bc38 0x49a126fd 0x2a9c7581 0xaf43095c ++ 0xb97acc90 0xca7a25b6 0x06adceb3 0xc8bf7269 ++ 0x6eeb0c59 0xa953657b 0x8e175c3a 0x9facc87c ++ 0x4c143d0b 0xb4467fe4 0x372b6cbf 0x2099b361 ++ 0xb8ac2cfe 0xb9a798d0 0x15b8b336 0xdab5d568 ++ 0xb53a4dda 0x00ce1ef7 0xefef7644 0x41823aa2 ++ 0xcb8d307d 0x3baf1baa 0x7124a219 0x8d2820df ++ 0xf3b8cfed 0x95e55a1b 0x8199fa40 0x631042fc ++ 0xf7886353 0x3592b875 0x3b516841 0xac7aa00a ++ 0x3dbfec52 0x9b91e8d6 0x0a8ffce6 0xd11429db ++ 0x92392bec 0xe194095b 0x253d7425 0x6b55919c ++ 0x4c11de8c 0x10b46ae6 0x5902c153 0x9509ace0 ++ 0xbb65fc04 0x648a35e0 0xab728bec 0x738effb4 ++ 0x416f95fd 0xee30a0da 0xcbaf3cb4 0x312fdeda ++ 0xcdb5aaf3 0xcc631b82 0xe3bf4d97 0x37e2a1b5 ++ 0x2920c6b2 0x0d995ad3 0x11af607c 0xcacf31d6 ++ 0x781496f2 0x9e478c0e 0xc4c14545 0x89ba2ab0 ++ 0xdb1a8262 0xbb924c65 0xad836a24 0x4374fbd6 ++ 0xd45a10df 0xd4158c0f 0xd4e88c1a 0xee8b8e23 ++ 0x3472ee5c 0xc0a0de0c 0xb1ba04dd 0x7be6532b ++ 0x0101669b 0x2a56f032 0x12879eef 0xa600458f ++ 0x20a96992 0xa2e7910d 0x13235ef1 0xb1185320 ++ 0x418ffba7 0xc0ba01af 0x27571c7a 0xde5b661f ++ 0xdd359089 0x6ae76b8d 0x095784d0 0x400a29fd ++ 0x5b3276cc 0x774c4e38 0x6a85e14f 0x37d8d1bd ++ 0x2007cea4 0x3e6942be 0x1a49828d 0xea4d84ff ++ 0x681b5a30 0xd8ff8440 0xac19844b 0x7553a6d0 ++ 0x389fb0a2 0x1b0526fc 0xa193b9e0 0xb9987cb7 ++ 0x6f14d980 0x0507f958 0xf6a1354f 0xcb9e49d8 ++ 0x5a4e1d3f 0x10d8c348 0xb77cf166 0x5097503d ++ 0xf0e17ed5 0x72a2e029 0xddc756b8 0x0a0e30e8 ++ 0xf12c6bc7 0x809db2c5 0x243fee9c 0xd2b57957 ++ 0xc1b19244 0x8d59262c 0xff94c28e 0x2050edc2 ++ 0xa4806d15 0x02026bf6 0x2d95c9d1 0xeb336e65 ++ 0x84bcf6ac 0xe53b97b7 0x954eedc9 0xf22209fe ++ 0xf4771bc0 0x1e405f04 0x1d0ec592 0xcd479333 ++ 0xdfeb3738 0x0ae23cb7 0x03d509c5 0x837a5e1a ++ 0x634a4467 0x7ee22185 0x102f5326 0x5d002daf ++ 0xea4e31ce 0x1d2be82e 0x5ebe1ad6 0x354259bd ++ 0xdaed312d 0x1e598ea0 0xd6a2b9af 0x76eb9bbb ++ 0x338645d3 0x4d3236f8 0x777011eb 0x0221d076 ++ 0x22dee347 0x1e35037e 0x2f34d4c5 0xdda03e2e ++ 0xa541311d 0x3acf0087 0xb435b17c 0x08b8210e ++ 0x7c77f156 0xe20025f2 0xea0e32a9 0xbf766fd1 ++ 0x8b6c4f43 0xf6ca80f1 0x07d1d342 0x272b865d ++ 0x8261aed7 0xf3bbe9cf 0x5835370f 0xfaaf4623 ++ 0x8cb5a665 0xe6c92e5f 0x22ce69f6 0x61e16f89 ++ 0xf15ec311 0xbacaf7b4 0x1317e388 0xa1869c49 ++ 0x328da67f 0xd818a8fb 0x6f4c7613 0xcc13480c ++ 0x06789788 0xa7b4e1a8 0x0d8fed7b 0x48308fe3 ++ 0xbe5ff9e2 0x7e7a74ee 0x4ffbb70c 0x551895c8 ++ 0x734ffc0e 0x82b8b8d6 0xdf710f9c 0xc3df529d ++ 0xf175e377 0xcec6194f 0xc3443fb1 0x52655208 ++ 0x94be229e 0x3279939e 0x771647a1 0x34c9a15a ++ 0xaae80baa 0x0b32ec13 0x6d59b440 0x50ddd10b ++ 0x98c166cd 0xfd465f40 0x74eabbc2 0x6dcb95c0 ++ 0xddef6f85 0x54348377 0x905f31bd 0xbde86f48 ++ 0x1322356f 0x90f3d5f2 0x5d2d4de3 0x2d5253a5 ++ 0x729b8879 0x41839289 0x845f8061 0xf5ffcf8b ++ 0xf25ec4d7 0x30570dda 0xcc69f64b 0xeb024bde ++ 0xc847bf80 0xeb8c5624 0x4e4d28eb 0x43f6cc1e ++ 0x8c201bfb 0x1475f9cc 0xde13b005 0x11fd9342 ++ 0x07617ac9 0x2fec6867 0x5b30a62e 0x5a8c91f7 ++ 0x47208b6f 0x680a22af 0x60fd0ebd 0x229ebe44 ++ 0x568c37d6 0xa3eb78b7 0x6f06f502 0x1b183db2 ++ 0xd48e4d35 0x4fb23b3d 0x57d7dc0b 0x3d34b427 ++ 0x0415552f 0x1bbe91d1 0x74e7ecf8 0xb1fdc30e ++ 0x466a69f5 0xfddf86b3 0xfb61fd48 0xae250961 ++ 0x6a99bcec 0x2142c5c8 0x1c08d4ea 0xe8f849c2 ++ 0xa3cb1614 0x43ac8702 0x22b50659 0x92dc3644 ++ 0x7a40a305 0x4a1e0780 0xfb638be0 0xb0912795 ++ 0x522a688e 0x1133c55d 0x0544a27b 0x3c56a574 ++ 0x748502e1 0xaee58228 0x30ae0736 0x41a029ad ++ 0xa1e3d0e1 0xa9b66582 0x6ec07231 0xda4dba0d ++ 0x41db8fa0 0x731529eb 0x87f679d3 0x593d1579 ++ 0x10935a3c 0x793d7b44 0xac680a86 0x1d01ec27 ++ 0x6d669681 0xef056753 0x96aab271 0xae070e5f ++ 0x3321dc26 0xa5ea33a2 0xf8f14406 0xdc755c9d ++ 0x7f8e3210 0xc2fd90cd 0x34c102d7 0xe1c744a7 ++ 0xa79f623f 0x07507959 0x34d28c67 0x26cbff85 ++ 0xfa24075b 0x618dcdfc 0x64d52c6e 0xce650b7d ++ 0xcc414394 0xadc52ceb 0x43667ed0 0xa04f518d ++ 0xe52196a2 0xbcb7e578 0x2ed0486e 0x4d669b00 ++ 0xf765e153 0xd2f097df 0x4ef97542 0xfa31d688 ++ 0x1698d42e 0x3d828d65 0x222355aa 0xf2c37eb2 ++ 0x3da4052b 0x198577ae 0x819590ff 0x5ab919a5 ++ 0x673d5552 0xd2fa9d52 0xb711b72c 0xabd9c188 ++ 0xb73a4ce5 0x2d20447b 0x3d19d4c4 0x4bbe86d0 ++ 0xd205021c 0xe9875ec2 0x8dcb01f3 0x6e109fec ++ 0x60a3a693 0x2fb6b975 0x0ed26de1 0x7487f920 ++ 0x83092880 0x4d5fcb5d 0x72b047d0 0xa256dcdd ++ 0xfef28251 0x41e36ee6 0xd91e2c20 0x7698357b ++ 0xb3684b1a 0x272311be 0x32860f75 0x44a6cc61 ++ 0x63e3f66f 0x5a1497b7 0xeddf5a57 0xcdd4577c ++ 0x3cc63cd3 0xf7e72773 0x3fc9bb40 0x97ce4118 ++ 0x1438da68 0x7a32210b 0x2aa07598 0x04e858ca ++ 0x850e0082 0x0b0f78d1 0xb178c391 0x9a2e231e ++ 0xa8f3b67b 0x2a08ea99 0x340d101b 0x42973ffa ++ 0x755ae5cf 0x201213c4 0x445e44f7 0x15a872c8 ++ 0x857b94f3 0x24c023ab 0xb203df2a 0xc4711de8 ++ 0xd1faaeea 0x1eb857b6 0x8c1b712b 0x11ad0f2a ++ 0xc64cf474 0xff6c128c 0xff13eac3 0xc4952e8f ++ 0xacdac9d1 0xb8c2f092 0x38d50a33 0xaeec4534 ++ 0xa661a7ee 0x4d19a2bd 0x0f2d95e4 0x9a221827 ++ 0xc9fe071f 0xe53486d7 0x1dc5426c 0x848eea4c ++ 0x607f616b 0x41a301f6 0xeadc389c 0x1f109048 ++ 0x249f14da 0x2a20d362 0x7c93cd00 0x7ca633e8 ++ 0xe50fb5a4 0xace8f92f 0x49638c89 0x478b4371 ++ 0x60d70e8b 0x0bfb8bfb 0x6cac803d 0x702996e4 ++ 0x15a35d2c 0xd68a2d93 0xe025d5ee 0xd8ca8c86 ++ 0x295393d3 0xce1be3f8 0x0ee6bd15 0xd6735f38 ++ 0x311495e6 0x7eb8bc83 0xea53551f 0x4fa9a90d ++ 0xe16a9ea0 0x651eb233 0x95f0afec 0xc687ed29 ++ 0x0cd3abc8 0x132bb8b4 0xd70dadd3 0x538e630a ++ 0x98481e4c 0x0d7e6f1b 0x3986b2de 0xbe0924dd ++ 0x1d14608e 0x189f553e 0x7a6b7786 0x48bae520 ++ 0xed56a3cf 0x795b4c6f 0x8670597a 0x40eb02ab ++ 0xf9b0b287 0xec9f86c3 0xe9a8c3a1 0xe6860542 ++ 0x387ad930 0x8676e402 0x633f0709 0xd661d134 ++ 0x011c1396 0xabf1f3f5 0x3fd76128 0x7be75289 ++ 0xa6046e69 0xf3713680 0xa2ed30c5 0x893df28d ++ 0x197b8543 0x9860bef6 0xf6930c5c 0x6c0c379b ++ 0x0b0026e1 0x3ca86896 0xa7ea0bdc 0xca94413f ++ 0x6cbe8d16 0xd3e4edf9 0xb06efcef 0x3a8934c6 ++ 0x00195592 0xa978bf0c 0x7435b0d1 0x3b17d97c ++ 0x0438684e 0x576ced8e 0x648683fc 0x362a8a87 ++ 0x493fd86f 0x6bbe0476 0x16f74de4 0xbfeaaba8 ++ 0xe6b90728 0xdc252878 0xe0b72eac 0x0872f52c ++ 0x2bab1521 0xa6c0d894 0x9f2b3726 0xd392e334 ++ 0x785f82ce 0x15bba4af 0xb55cd743 0x6e8e9cf8 ++ 0x047fd2e7 0x1fdfe424 0x8d4820e5 0xce7dd8c3 ++ 0x88c82282 0x31ef9a76 0x1881fc38 0x3932a9da ++ 0x65bbfefb 0xe00f33b6 0xdd0754aa 0x1f596051 ++ 0x704dfd7b 0x2604be1b 0x08b6c4f5 0x3f244085 ++ 0xd89c65e3 0xcc4cdb71 0x143a2681 0x1bd3d004 ++ 0x009460ff 0x86e314a5 0xb1aff86f 0xaa2599df ++ 0xbf68de69 0x355c8267 0x9588dbed 0xe47edd9b ++ 0x266b2ddd 0x129b0b01 0x6e6622a6 0xb3ea4a00 ++ 0x802abd6b 0x7a268c1d 0x9f5a7b41 0x6f4aba0e ++ 0xe279b988 0x660ef08f 0xf4207beb 0xfa0168f6 ++ 0x93266ea0 0xedfef092 0x302b5e5f 0x7278d2be ++ 0x58a494ab 0x8f53a302 0xf5e766de 0x1ef717bf ++ 0x45e2d6fd 0xf593b066 0xaea0f1e1 0x1bd1e027 ++ 0xf853ba21 0x1127c5c4 0x8aa43b18 0xf1fba0b8 ++ 0xe1cfb0b8 0xa9f9fef6 0x1320f1ab 0x5f7dfc74 ++ 0x30f11ab4 0xaf47a3cc 0x9c190830 0xac085edb ++ 0x8b4db7c8 0x771ec065 0x6d5f3c3f 0xb8815437 ++ 0x20d3c99c 0x00823c74 0x24d63cae 0x7587e453 ++ 0x1a3fd67b 0xa5b361cd 0x789d168b 0x98a93943 ++ 0xd7505c0a 0xa923b38d 0x46097a4f 0x814e41dc ++ 0x0f50f2de 0xbb548368 0xc48273d4 0xf27b6798 ++ 0x9a6b5231 0x68491e7b 0x3f482179 0x89ea3b35 ++ 0xa7525ffd 0xf8f1f616 0x07859572 0x738cb4b3 ++ 0x8937c6dd 0xf5988c71 0x4874905e 0x677a8c17 ++ 0xd58df987 0xc4210078 0xe6b1c480 0x7a91e14d ++ 0xa1228a7a 0x09057467 0x6cd59ec7 0x6ba93248 ++ 0xb8e263cb 0xd3305730 0xaec36ee6 0xc773d0b5 ++ 0x2895f8ec 0x6c9f5fb5 0xd32a21a5 0xcea9d058 ++ 0xfa97282f 0x5559ceb4 0x5a0bf57c 0xf3cd99b5 ++ 0x2771f6c4 0xfcc9a35d 0x5143417e 0x7c6f9db7 ++ 0xb47cb7df 0xe7dde37b 0x70a07531 0xe25e06a2 ++ 0x3bbb7d30 0xaf41b085 0xe664f973 0xee2c7ab7 ++ 0xef8eb1b5 0xfba67f7d 0xd71568dc 0xbbff3339 ++ 0xdf49725d 0xbc0e7edc 0x5361e6d3 0xb0978c73 ++ 0x1320540a 0xa9843a06 0x34099c74 0x4bdddd23 ++ 0x18680496 0x44f9cc19 0x6de71a34 0xe4eae858 ++ 0x3349a819 0x28400571 0x10a55fe9 0x05672399 ++ 0xb376eadd 0xed4b1a35 0xe79d0a4f 0xca8d0601 ++ 0x78a7b066 0x8ea59a40 0x7be112a2 0xe99ea438 ++ 0x44bd9efa 0x6e5227a1 0x70325aef 0x777282e9 ++ 0xb579c189 0x4ee92bc9 0x0d0236dd 0xb57cf232 ++ 0xb815e184 0xd05823e4 0x0c9490b8 0x70a5fa56 ++ 0xdf0f178a 0x99d27374 0x1aba9e05 0x18378c3d ++ 0x86991118 0x3a199a70 0x90b2a2cf 0x67a6923b ++ 0x0975e5f2 0xf50fb0a3 0xbffbd67a 0xce6371e7 ++ 0x203564ef 0xb1d7a395 0x201cb1c4 0x30085e3c ++ 0xfb2c66b4 0xf80ae969 0x1d407625 0x0bca1a0f ++ 0xb62c078f 0x83efbf38 0xbd7b0a69 0x7d9bb66a ++ 0x46b5c885 0xb256d753 0x0b5d008e 0x1756d5bf ++ 0xa9ffdaf6 0x01231fcb 0x8c69e461 0xbb2ad661 ++ 0x29dee8f7 0xf1f23d56 0xd5e90ffa 0x48d9d93e ++ 0x77b26e95 0x49c47953 0x7565da8e 0x41a6124a ++ 0xfce69643 0x55f99554 0xa5501d6e 0x5738b726 ++ 0x4c989c96 0x93cbe27e 0x20ff3d38 0xf4787a09 ++ 0xfa3520e4 0x26b2dc11 0xb701c94b 0xcd8857ee ++ 0xb4b07229 0x0bbcf1a7 0x3d31cd32 0x08ced413 ++ 0x3da04c1d 0x7bdf1787 0x344f510d 0x53a02e8e ++ 0x7e295418 0xa5ed24b3 0x3a5a2c98 0x34947e44 ++ 0xb398bfcb 0x7c0ea498 0x18db3289 0xec646beb ++ 0x2e8ed766 0x5aff9ee3 0x497dc7fa 0xa70c3be4 ++ 0xfc9306c4 0x729f532c 0xd87d61d0 0x635fadbd ++ 0x1efb1234 0x66fdb543 0xf5b86d07 0x3a4836fd ++ 0x9caf7dd3 0x8a9d9e5b 0x179529ac 0xa9a3fee8 ++ 0x4cfa4495 0x791b8b7a 0xc503fc2b 0x1e07d0e5 ++ 0x0561cfae 0xb5e7c403 0x0809744a 0xea84c654 ++ 0x23614fd6 0x23ae773f 0x545be2c5 0x3585b8b4 ++ 0xcad8b6ed 0x088a56c0 0x81054caf 0xecb13d9f ++ 0x44bd49f7 0x90a3da4a 0xf4b04300 0x32a2b69f ++ 0x44bed501 0x85cb54ef 0x85dde589 0xe410132b ++ 0x1c2e41c7 0x3d28cc9b 0x4df948de 0xaa058c37 ++ 0xb82cf615 0xfa0574f8 0xd0391f5d 0xfb2b98b3 ++ 0x3ce5585d 0x80ca4d6a 0x4b138f75 0x721ccc65 ++ 0x496a3e37 0x4a8dd025 0x2d77b3db 0x65800ff3 ++ 0x1d2df03e 0xb4b12a59 0x4c6a5b9b 0x17413fda ++ 0x4e938a09 0x7e3aa03a 0xf86cc8f3 0x972cd7b7 ++ 0x871849b1 0x0c0879d2 0xc7c652a9 0xe9531ae1 ++ 0x541142d9 0x4f731afa 0x9c43e538 0x866b695d ++ 0x4a4c4076 0x1e8aa293 0x51bc1eaa 0x5f57d28a ++ 0x142eb7f5 0x14096954 0xae0e9eb3 0xef732983 ++ 0x70187474 0x3569b88a 0xfd3a3c61 0x54f0e2d0 ++ 0x7afff032 0xa89cd23d 0x658114ec 0x434ccbc9 ++ 0xc25f33c7 0x1b6e9a7a 0xd97bd017 0x3b7489d7 ++ 0x67129c97 0x333ee180 0x04bf73ae 0x4731105f ++ 0x09d589f9 0x7d5a67a3 0x3e8fcb8c 0x2090c536 ++ 0x14a623c0 0x21a247fb 0xe117bbe6 0xe98bbd1c ++ 0x09e23674 0x02f09f22 0xba7f9f45 0xd18573b6 ++ 0xa6eb18fb 0xe01a7904 0xa8869f58 0x82ec81ee ++ 0xf4549f1a 0xfa0f6085 0x1cf809e9 0xe603d078 ++ 0x13525306 0xd5611c7a 0x2c92b32b 0x5fdc0c0a ++ 0x0b3aaced 0xa40059b7 0x27c42499 0xcc619db5 ++ 0x9f9b7841 0xfdca5eb2 0x2d3e833a 0x2830a6a0 ++ 0x4c81f3b0 0x3ec8a8bd 0x50b95605 0x33a9d515 ++ 0x7fe14795 0x4ff1d83d 0xef92fbfe 0x87f4faed ++ 0x35d5fc69 0xd8764a49 0xec81abfe 0x634a2ed8 ++ 0x9635825a 0x0943624c 0x5eea8464 0x578e2344 ++ 0x551bd5af 0xca02915b 0xea419d8c 0x9d0fa00e ++ 0xf3633f48 0xc6ad62ae 0x1eeef6ab 0x21ab106a ++ 0xe325954d 0x60457916 0x6ac9168c 0xea8a9d6f ++ 0x14772361 0x7630452f 0x8795e1de 0x21144d8d ++ 0xe7996dd2 0x45aff64a 0xfa62c37f 0x3f5a04cf ++ 0x250f988b 0x7985d243 0x1f717008 0x7908d22f ++ 0x4fc0d5d5 0x856d9819 0xccfab84e 0x3fec2a74 ++ 0xe75c1af6 0xe2682ac3 0x2f08e560 0x7133d2a0 ++ 0x63e5fcca 0x3a17438f 0x9cb826c8 0x06a2f3cd ++ 0x4bac2001 0x50596ba4 0xe74758d4 0x64d17e0a ++ 0x08fc5b67 0xb0d62f6e 0x95eb8e15 0xd51bfa64 ++ 0x421c68b9 0xdd1526a8 0xfb7ea10e 0xab21193a ++ 0x4b1186dc 0x77bbfd82 0x1ab08e9f 0x871659a5 ++ 0x1658fd5f 0xa04f322d 0xf50ed273 0xb8d411a7 ++ 0x8056489c 0xfbd858ae 0xd70f7d88 0x3c5cbc78 ++ 0xf53ec2be 0x1d2228e2 0x8b53aace 0x212454d9 ++ 0x76ea1d2e 0x9ca66373 0x9f6679c2 0x51c48b56 ++ 0x47348811 0x8abc0a27 0x60050980 0x5d290483 ++ 0x7ea8504f 0xde186466 0x91219d4c 0xa73144ed ++ 0xb5f36fa4 0xa37912b8 0x02625bd3 0x3bc2d9ed ++ 0x2e623844 0xa9a751af 0xf0ba18af 0x4433e06e ++ 0xca7cda24 0x686c9163 0x86a437c1 0xf8c17120 ++ 0xed50542e 0x62b61fa1 0x600e47b6 0xdff86df8 ++ 0x77502dd5 0xea5d75ac 0x095a06e4 0xa18efafd ++ 0xfbd01eaa 0x27a1cb0a 0x3dfcab8e 0x07be7250 ++ 0x086cb680 0x2c1ddcf4 0x6fa79784 0xcd874edb ++ 0xa383d520 0xa5c0d1cd 0x2e09cd9a 0x34d645c4 ++ 0xf6b9b98d 0xe8e80ab0 0x39b78c60 0x6098b6f2 ++ 0xc3c13e53 0x88c9fd83 0x60c9e766 0xf49c4c2d ++ 0x79e3d3d3 0xbfade7d5 0x6ba57dc1 0x3069e3ad ++ 0x59632e2b 0xb86e871e 0x2dd63287 0x9704b283 ++ 0x343a6cb3 0x37d7950d 0x283f262d 0xd49d5f75 ++ 0xdacc49b7 0x5952e045 0xc0fefa19 0x69effce3 ++ 0x5b2a3c0b 0x3757339f 0x18584f8a 0x77a80760 ++ 0x5fcdadc0 0xc9b4df80 0xfa521be0 0xbcfc8ecb ++ 0xfd3f8eb8 0xbee4739a 0x139caf94 0xbdea1cd7 ++ 0xab158240 0x233fd8dc 0x8ec63274 0x34eee6d8 ++ 0x4603b2f8 0xae544fc5 0xcd444551 0x2b2b349a ++ 0x0a562524 0xb2e02518 0x577b1125 0x8b3c1ff9 ++ 0xfd27d88c 0x2ad77d04 0x1f82a54e 0x20254fdc ++ 0xee8e63cf 0x8df3fa2f 0x9ffc7c43 0x421ae12f ++ 0x9b166441 0xb74a5a4f 0xdad0511e 0x0a8ee5e9 ++ 0x8fe86041 0x37ef90ea 0x3fcf8380 0x87288691 ++ 0x384b8b8a 0x98d8a45f 0x995443d7 0x6c617236 ++ 0x9a40f76f 0x9f30733f 0xfdbf3927 0x7b4c0281 ++ 0x9e87e64f 0x9802938c 0x65f9de31 0x829c3eda ++ 0x0a1d2f4a 0x22e0e854 0x30045b70 0xbf84a44f ++ 0xc2c30b57 0x47c5ff90 0xaea87e93 0x99c69ae5 ++ 0x1080e89f 0xc2896e80 0x09ba0cb2 0xd16ee263 ++ 0xe05337b0 0xef1d8359 0xc1d4b102 0x08620117 ++ 0x2e4ab2bf 0x05dc3af8 0xc7ab866b 0xeee05983 ++ 0xd0a00c19 0x96996791 0x75ac6042 0x29001ada ++ 0x13440a23 0x2b1eca42 0x4cddfd68 0x81a98384 ++ 0x6bcda226 0xa8594443 0x92f26e53 0x434de4ec ++ 0x07596ee2 0x4c8ea6ed 0x5596054d 0xaffe0ef4 ++ 0x6dc1ab64 0x20bc006b 0xad4e3933 0xe6df0d3f ++ 0xfb3ca9ee 0xc2895a4e 0x8fed0d43 0xa5ed7985 ++ 0xc364f083 0xc397a806 0x7b651ff9 0x1d7e22e5 ++ 0xfd02f57d 0x5f16a429 0x8612177a 0xd36b8983 ++ 0xd87b0303 0xeaa632b0 0x57dff2b2 0x19772dd0 ++ 0x51317bfc 0x28404b1f 0x9e35d818 0x9c771bb7 ++ 0x6d42a5c1 0xa6030578 0x9c844d5f 0x95d5eb7f ++ 0xdf15f5ec 0xf0f8c86e 0xf8ebfd20 0xae32d9b5 ++ 0x4ce2b066 0x776f0149 0xda8a429f 0x0e895a79 ++ 0xbe62c881 0xf9c051d8 0xcaa48f97 0x9e8dcb1b ++ 0x69cafc21 0x411f1bff 0x4f4d71dd 0x102cf709 ++ 0x974ebe53 0x7373aea6 0xef2a7ec1 0xedabaccc ++ 0xdac969c4 0xe010b562 0xb6880570 0xa7a7f5d4 ++ 0x3c6464f2 0x96dea774 0x1614a588 0x06074080 ++ 0xb37304f0 0x99da7dda 0xd3e36214 0xb27b7cae ++ 0xb4cef0b3 0xa435dc77 0x9d1c1a15 0x616993f4 ++ 0xb8a5ec8f 0xdce1ff5a 0xaaea14c4 0xa5d2172f ++ 0x90c8c636 0x49c0b81e 0xff9db895 0x4252b336 ++ 0xd420b5ce 0x87b35be4 0xae32bda2 0x441092d9 ++ 0x321e8583 0x7d863719 0x3c888147 0x3f2bb9f6 ++ 0xd1daf5f1 0x682f2ffe 0xae62e280 0xcf8f928a ++ 0x4a7237f5 0x6f3a55af 0xb91dba98 0x9b83b723 ++ 0x0e857ed8 0xd5ac567d 0xaf8bf791 0x23f8269a ++ 0xe369638f 0x6a88edb1 0x5ff0be07 0x5c02b513 ++ 0x7d22f89e 0x2f865c08 0x9cc0d56e 0x31c87205 ++ 0x420508f2 0x95a21602 0x04d838e3 0x353353e8 ++ 0x7ca1feb6 0x61c6f7dc 0xf78a68eb 0x918f2ac1 ++ 0x413037a4 0x09692d1c 0xc8eceb54 0xb1bf975a ++ 0x2ab63552 0x467bceeb 0x408bf024 0xeaed2b31 ++ 0x3255158b 0x8d9c6617 0xe450350f 0x615cf5f3 ++ 0x1a7fd744 0x27a0da59 0x43298211 0x77392298 ++ 0x9511e81a 0x08a2c2dc 0x3d6f1113 0x967e6586 ++ 0xd1726b35 0xb9292da6 0xaa6f8ad4 0x0f13b47f ++ 0x34b96cea 0xebd9487d 0xfe533d60 0x41bcdc60 ++ 0x364c8c79 0x32be8bb8 0x1395ead9 0x9e85e474 ++ 0x146b6fbc 0xc93267cf 0xcdda98d4 0xccfb2835 ++ 0xe779dbd5 0xf9288237 0x2073e129 0x16fe4ab8 ++ 0x34ca576d 0xac313eb7 0x5deb3b4d 0x1727510b ++ 0xc168a414 0x332cd921 0xe38e8123 0x9a2c1aef ++ 0x80f5d1d9 0x7c88c923 0x8af17577 0x59ae1408 ++ 0xffa5e565 0xb418ab13 0xdd6376aa 0x45cd70d9 ++ 0x3c3a06a2 0xbc555669 0x34d1fc08 0xc2aa934a ++ 0x385416e2 0x91ceeadb 0xe06c9cef 0x0394dbd4 ++ 0x43e7c657 0x296d7621 0x55dafcba 0x808b836b ++ 0x61c41f0c 0xd9689bc5 0x3a531ffd 0x8417ed30 ++ 0x3f3f8616 0x641eb4a9 0x24964006 0xe8d2612a ++ 0x3b916d7c 0x5603319f 0x29007523 0xc9c7dc1c ++ 0xd1f7212e 0x22ac1932 0x05c39a5a 0xd55081ce ++ 0x589ae996 0xa998fcbe 0xd8df5512 0xef7d7a01 ++ >; +diff -ruN u-boot-2015.01-rc3/arch/x86/dts/microcode/m12306a9_0000001b.dtsi u-boot/arch/x86/dts/microcode/m12306a9_0000001b.dtsi +--- u-boot-2015.01-rc3/arch/x86/dts/microcode/m12306a9_0000001b.dtsi 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/dts/microcode/m12306a9_0000001b.dtsi 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,814 @@ ++/* ++ * Copyright (c) <1995-2014>, Intel Corporation. ++ * All rights reserved. ++ * Redistribution. Redistribution and use in binary form, without modification, are ++ * permitted provided that the following conditions are met: ++ * .Redistributions must reproduce the above copyright notice and the following ++ * disclaimer in the documentation and/or other materials provided with the ++ * distribution. ++ * .Neither the name of Intel Corporation nor the names of its suppliers may be used ++ * to endorse or promote products derived from this software without specific prior ++ * written permission. ++ * .No reverse engineering, decompilation, or disassembly of this software is ++ * permitted. ++ * ."Binary form" includes any format commonly used for electronic conveyance ++ * which is a reversible, bit-exact translation of binary representation to ASCII or ++ * ISO text, for example, "uuencode." ++ * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT ++ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER ++ * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, ++ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ++ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * --- ++ * This is a device tree fragment. Use #include to add these properties to a ++ * node. ++ */ ++ ++compatible = "intel,microcode"; ++intel,header-version = <1>; ++intel,update-revision = <0x1b>; ++intel,date-code = <0x5292014>; ++intel,processor-signature = <0x306a9>; ++intel,checksum = <0x579ae07a>; ++intel,loader-revision = <1>; ++intel,processor-flags = <0x12>; ++ ++/* The first 48-bytes are the public header which repeats the above data */ ++data = < ++ 0x01000000 0x1b000000 0x14202905 0xa9060300 ++ 0x7ae09a57 0x01000000 0x12000000 0xd02f0000 ++ 0x00300000 0x00000000 0x00000000 0x00000000 ++ 0x00000000 0xa1000000 0x01000200 0x1b000000 ++ 0x00000000 0x00000000 0x16051420 0x610b0000 ++ 0x01000000 0xa9060300 0x00000000 0x00000000 ++ 0x00000000 0x00000000 0x00000000 0x00000000 ++ 0x00000000 0x00000000 0x00000000 0x00000000 ++ 0x00000000 0x00000000 0x00000000 0x00000000 ++ 0xc2b13ad8 0x6ce74fea 0xd364ad12 0xf6404a69 ++ 0xc89041e4 0x217fa2f6 0x6ff6e43f 0x79cde4eb ++ 0xdb01345a 0xceecca42 0x5ee7d8b4 0x24afdbe6 ++ 0x5fb36178 0xbc17d76b 0x31b7b923 0xc81aec82 ++ 0x647b3320 0xf1db9653 0xff3b9759 0xe9c74b72 ++ 0x3b193752 0xc147860b 0x160e0d6a 0x5bdb9dbf ++ 0x1ccce2ac 0x387670ad 0x2f106f05 0xf8607ea3 ++ 0x42562576 0x30e086fb 0x409a06b8 0xf1957736 ++ 0x5eb03f65 0xad147fab 0xe1a8e8b6 0x208d59d2 ++ 0x683fba2e 0xf172b378 0xf8138dba 0x61e81d1f ++ 0xd551f997 0x28c79780 0x04f9db27 0xa80679b9 ++ 0xaca4e7ff 0x6876944b 0x26d7dbc1 0x77f7dc2a ++ 0xf0bcb163 0x1b2a8e81 0x7b90aa49 0x8d5eaf2f ++ 0x522384ae 0xae7f7082 0x412ba10a 0x1ce1baa0 ++ 0x478c29b4 0x9c09b4d2 0xf225f64f 0xd43026cd ++ 0x81098579 0x7df5db05 0xa5815bb0 0xc73ee756 ++ 0x9738cb95 0xa5bd62e2 0x88e2c6b2 0x778e7fcb ++ 0xd3bdb872 0x9404403f 0x5be6ad63 0x71dc4abc ++ 0x11000000 0xd350099c 0x242d0996 0x1a4ddff8 ++ 0xd7f1f03b 0x77590eb8 0x45c3ad79 0x3b714d23 ++ 0xa85ba322 0x31851c5a 0x540fe0ce 0x38692bd6 ++ 0xe3d9927b 0xb33428b5 0xcf0ac8d2 0xd3646604 ++ 0xca88adc7 0x8afc41c8 0x721432b3 0x8fd19454 ++ 0x26344e0d 0x3acf6c28 0xbda18c21 0x526d52ac ++ 0xf8d37e15 0x09305e37 0xf6907871 0xdb56cc21 ++ 0x6802cccc 0x6693c8a3 0x0f4dbe32 0x0d924103 ++ 0xee9242a7 0x5f867a13 0x2f65a246 0x6b35ad05 ++ 0x39fb7da1 0xd69cb7d8 0x45869424 0x4768b466 ++ 0xe3ace365 0xa85eea7c 0xa59939d9 0x2ae32fb9 ++ 0xa20b1559 0x8865f3d3 0xbe02e023 0x4199575b ++ 0x0c43089a 0x0d57b287 0xd37544ad 0xcd4573b4 ++ 0xa96b7485 0x05b67259 0x117414ca 0x2ba24577 ++ 0x439db14d 0xf82c5833 0x54ec9806 0xf8282306 ++ 0x1de7d3cf 0xf7a76dc2 0xcd897f60 0x0bb1decd ++ 0xae58efb0 0x743c07af 0x48adffb5 0x262260e7 ++ 0xaa9fa071 0x9a9ef7c0 0x98e861eb 0x14a48871 ++ 0x0b4c3292 0xad851820 0xe0f7f45c 0xd71366c5 ++ 0xc63a2f01 0xd02f23c6 0x49645eb3 0x2365fe48 ++ 0x44817f1f 0x576ee68e 0x396b6134 0xd9fc4857 ++ 0x9a771368 0xda5f2693 0x6ad30ec2 0xc8d08171 ++ 0xe40bcd42 0xf82291a8 0x3094a8b1 0xd3edffa3 ++ 0x5d5fb5e6 0x93802a7e 0xdf0ff376 0x09ebeae6 ++ 0x35091690 0xe938ec68 0xd203065b 0xcf2e8172 ++ 0x85282b27 0xe59fb64d 0x4b2ad981 0xeb5dde75 ++ 0xc07eac26 0xa78c969e 0x74165d84 0x61c4cfc8 ++ 0x740452f3 0xe5f6435e 0xb712e157 0xac49215d ++ 0x5be5e61b 0x09f46a94 0xde5cd48d 0xe3ed6b11 ++ 0x2e8173de 0xabb6759b 0x46ffc47e 0x0cd84607 ++ 0x6046c26d 0x19356116 0xe1da098e 0x8e1bbe9f ++ 0x5c8d6c20 0xa17cfe55 0x101a1f91 0xd64aef70 ++ 0xef2e7b34 0xbb428dc4 0xf2252a3d 0x8ab3f6c0 ++ 0x161db4ef 0xfdbf4f9c 0xb5bf9f19 0x414ea8b5 ++ 0xc3db5422 0xfc3934f2 0x635a8253 0x86260b8c ++ 0xa4c0e59a 0xa45d24cd 0x4a25da59 0x7a568be1 ++ 0x4ae3587e 0xbc77a3e8 0x70723657 0x9abcabaf ++ 0xe0a95d4e 0x25519f22 0x3ee1d340 0x2ddc2ca8 ++ 0x04ae20c3 0xc143f7c1 0x4a79e4d6 0x19377b64 ++ 0x2ab0d3f5 0xd3f19f6d 0xc8dc880e 0xf577dab6 ++ 0x69b6ac46 0x37d4af3b 0x0999bc85 0x3d9fbbf5 ++ 0xb9387ac9 0xc148824f 0x4d11f5f7 0x1ff4594b ++ 0x59beb5b7 0x29474f52 0x68e6b2b9 0x4b60966e ++ 0x5e40a736 0xdeff5ef2 0xe623bbc1 0x50407021 ++ 0x34ec34ec 0x131b3d57 0x628bda97 0x58152b10 ++ 0xdd830410 0xf953e469 0xea4c8d25 0xd79d7ba0 ++ 0x7a4da4f4 0x887d6841 0x7ff1e41f 0xdeffc5dd ++ 0x8354cb26 0xb133716f 0xae73deaa 0x292e200b ++ 0x9a9400f9 0x7a5d21c3 0x590d4799 0x1333b4a3 ++ 0x782bbe3f 0x314fcb2c 0x475a1cca 0x4cd07c7f ++ 0x7a69a5fe 0xaef5a52a 0x0e9957f3 0xf7d86f6b ++ 0xd0983d0b 0xdffd48b9 0xbeea1e9c 0x19de4c7a ++ 0x46487695 0x5719e4e5 0x6dab39ac 0x856bf2bb ++ 0xc0644339 0xe60e92ee 0xc328b5e5 0x2d0c31e9 ++ 0xeb73f1f4 0x7b577248 0x361159ba 0xd0f7002b ++ 0x5fa816ae 0x11ace78c 0xab62e0da 0xc924891a ++ 0x1d5800e7 0x4f90e04a 0x21374c9b 0xa3350e64 ++ 0xcb9c1901 0xcc350b3d 0x5c3e5932 0x3cc6261d ++ 0xc3b54acc 0x849cf200 0x1425fad1 0xb3a479d9 ++ 0xfd4dfda8 0x62973133 0xdd528736 0xd7e62e0e ++ 0x6921e1d6 0x7e41d7f0 0x74397b86 0xf739079a ++ 0x4ff82d1b 0x38b6fcdc 0xb20e36bb 0x0cef9b7d ++ 0xa737fdf3 0x1d18ef1a 0xc2c5dda1 0xdb16c5e7 ++ 0xbfa99b2a 0xf83f2c10 0x883c8183 0xad10014d ++ 0xcf9f6321 0x5e0c079c 0x3ddd3d29 0x306325e0 ++ 0xebdaff05 0xa88741be 0x181fbf20 0xa58a3a1c ++ 0x1f7c7165 0x7f5f5141 0x12576e50 0x9db22976 ++ 0xd1fbe204 0x6ca2025a 0x10c15009 0x920649fa ++ 0xf42d3035 0x79efbc73 0xad2bde6c 0xb4e317ab ++ 0x1f7358be 0x447d850f 0x9bb2d1ee 0x3545cea3 ++ 0x78eff6bc 0xaa86e51f 0x6383ada5 0x0c969d05 ++ 0xadd720e6 0x92f77e04 0xda58e24d 0x401bd323 ++ 0xdac090fd 0x9dc372b2 0x86726956 0xc508fde7 ++ 0x20ec1cf1 0x29fdb66a 0xa3f7e3b2 0x5ffa58ac ++ 0x653c0106 0xf0d01026 0x55feffa1 0x661399b6 ++ 0x5b23998d 0x91add159 0xbf917f02 0x87ef6fee ++ 0x64c4d653 0xbfadf48f 0x23f3ebcd 0x67869030 ++ 0x3b90b7ae 0x19efc2a4 0x26596a35 0xaaa5fcf9 ++ 0x5a14fd14 0xebeb9c9f 0x72224625 0x3a2c0009 ++ 0xbe5a09af 0x5aad7b74 0x7d92261a 0x8bd722bb ++ 0xfff48488 0x0379b991 0x750cdaf8 0x83d3ec67 ++ 0x2f582115 0xfdeca132 0x889817f9 0x2bcccbb5 ++ 0x58107ba4 0xb57e016c 0xbbc45c80 0x5f14439f ++ 0x6e71c73c 0x5e18e93f 0x43c07fca 0x6d49bc66 ++ 0x6641a788 0x234f48cc 0x9e18222c 0x86efa566 ++ 0x450ad39c 0xbc3ef112 0x98e7d17c 0x5334659e ++ 0x9919cb9c 0x9fb4f0c5 0x2ea90893 0xc70453a6 ++ 0xe83cc486 0x454da884 0x4cba0511 0xfb83f2aa ++ 0x0cf7ec27 0x20ef41bb 0x08355d0e 0x732798dc ++ 0x1689d337 0x61bf955b 0xa10d3f79 0x05fe9c6a ++ 0x1cbbc776 0x42e00326 0xf92509f4 0x71488be8 ++ 0x3d92da26 0x839acf18 0x6dae5781 0xeecfcc85 ++ 0xc63c0f72 0xcd79f887 0x677dd4c5 0x167c779a ++ 0x3359b45d 0x48f974f6 0xbd7debdb 0xd57d5935 ++ 0x41beb132 0x1574e273 0x417a8fb4 0x46ca9d85 ++ 0x859f3434 0x7cd1675e 0x1fb4e8b2 0xc55de45b ++ 0x4be8afa5 0x193c1260 0xd4225590 0x255fb988 ++ 0xde63caee 0x96108c66 0xacc2b48a 0xad2992d2 ++ 0xdd4cf4ad 0x0f6f5246 0xaf20d77d 0xf1c81d1f ++ 0x0db57bac 0xbb39c168 0xb78944a1 0x4ea55714 ++ 0x0bb537be 0x5824ab81 0xdb9345fe 0xab0606d4 ++ 0x12a8b9c2 0x90001c30 0x12c7197e 0x603cae66 ++ 0xe2cb6b47 0xab0f94ba 0x28091fbd 0xb79d112d ++ 0xc53a69b4 0x7de8c3bd 0x4aee880f 0x5a5dd399 ++ 0x850105e4 0x366d8714 0x4da7971b 0xc3a0013f ++ 0xfbc2461e 0x65954a32 0x4c8f348e 0x3ddf0054 ++ 0xc615725a 0x3021e167 0x4a88ec0c 0xd69c44b1 ++ 0xb21cd2b1 0x08e16586 0x90f02d12 0x554afff3 ++ 0x65067d72 0x8c310d6a 0xd62ab40d 0x443bda33 ++ 0xb6eac5c1 0xd0cd461e 0xaf200f23 0x41fd1b8e ++ 0x84e74a66 0x15b0bc4a 0x13fb1a4e 0xb36bf139 ++ 0xeeaa0c1c 0xa91d6fab 0x64c99859 0xc049d5ae ++ 0x38921c4f 0x92b2f269 0x5c867fd7 0x41bd4d62 ++ 0x70009a4c 0x85a37897 0xe228af8e 0x9ef4f31e ++ 0x891bbb42 0x3c09f291 0x32c29325 0x88f9ee6c ++ 0x81a0bc38 0xfef31889 0x8d2e3f79 0xc5e405f7 ++ 0xb78e4127 0x3d61f392 0x3427d259 0x9f0bb662 ++ 0xfe6ffb44 0x57e1e8c2 0xd4abd164 0xd0449914 ++ 0x5bd5fe60 0x873601a5 0x0b07ae28 0xf4aac893 ++ 0xb9c8f9f5 0xe3a514ed 0x9da193c2 0x55ebeca0 ++ 0xa9d8f9bd 0x0a37dcc7 0x3f1d9f15 0x0bc645d8 ++ 0xb808085a 0xc79b0f4e 0x0286eafc 0xefc87a56 ++ 0xf1225ab8 0x58ac6a9c 0x9227ea3c 0x82deed0f ++ 0xff0f8edb 0x3c29a1b6 0x6d777dae 0xbeeee7d2 ++ 0x0bdca157 0xf8d9d18d 0x52fda265 0x630da310 ++ 0x4f660e86 0x1c985fc0 0x68f1c993 0xf4ae63bf ++ 0x3ec5373e 0xf6a10f89 0x2b19bd61 0x8aab04b4 ++ 0x75653336 0x4be6689f 0xc2631812 0xc6d386f4 ++ 0x93a6268a 0x4e5851ad 0xc2b47fdd 0x5acbd226 ++ 0xd2aaf25f 0xbe83081c 0xe57eb32e 0x00debc3c ++ 0xcd8d7dbe 0x7cf67994 0xba17c779 0x34c19529 ++ 0x5cf29a31 0xe10b7d8e 0x7b116896 0xf702de15 ++ 0x6ee2e8cd 0x2f3a12d0 0x0e2a4666 0xbc1333e7 ++ 0x2b653c7f 0x36e282a5 0x0ca0544a 0x2255b148 ++ 0x5e413d5b 0x0fc88547 0x81e3073f 0xbcef6576 ++ 0x12b29e93 0x233bef85 0xd41790ed 0x4f4dbf15 ++ 0x20dea3d6 0x25f86504 0xb13177fb 0xee626fbb ++ 0x2f7529e3 0x6157578f 0xeee068f6 0xc97c5909 ++ 0x053c28cb 0x6f540d47 0x692bb599 0x7004243d ++ 0x1c5620cd 0x0ca53749 0x9d7d6a4b 0xb8e504f7 ++ 0xdd138f32 0x4d2fd525 0x676904b1 0x67b90411 ++ 0x6777ede4 0xc1fbe02f 0xd7eb61fe 0x1c62f909 ++ 0x91cfdb29 0x293a8d72 0x4475e4dc 0xba9d955f ++ 0x5413cb0b 0x952694f7 0x3b8eede3 0x33f1f6cc ++ 0x61c2604a 0x244f8403 0x862316a5 0x2e0387fc ++ 0xb3b3c699 0x418f5b0b 0x89a49abb 0x6c325320 ++ 0xa952f0c0 0x72454ccd 0xaa272d96 0xf05e80d4 ++ 0x1dceb03a 0xdb00d312 0x96cbcca4 0xc87c31f7 ++ 0x96b17422 0xdba12c7d 0xedaac717 0x99b1da89 ++ 0x48f3e07e 0xbace3088 0x71937740 0xd754a585 ++ 0x31784510 0x36d08e4c 0x4e8e2396 0x081fe566 ++ 0x0cd2092c 0xec932481 0xfae11d02 0xcb3b8609 ++ 0xe20559f2 0xa2330b46 0x2beec857 0x86911540 ++ 0x5e8e1895 0x4f42f3cf 0x8e32bede 0x78285f4c ++ 0xaf267610 0x9dc86091 0x6adf9b99 0xfc91da24 ++ 0xc987356d 0x78f260f0 0x9cc6f796 0x1d6aa013 ++ 0x5f1922de 0x54d065e8 0x8a7c3cea 0x13768df3 ++ 0x4e8858b2 0x712b5b8d 0x0b64c3be 0x3845ef6a ++ 0xff77b842 0x83a497a5 0x77f15aaf 0xccfc6df7 ++ 0x20084d31 0xaacdde0d 0x4059b446 0xb940b3a7 ++ 0x3fa88d6f 0x3162ec66 0x43cc767b 0x2a2a6916 ++ 0xd0dea02d 0x5b9f11a1 0xec36c7a9 0x6d7eb6ce ++ 0x4506fc1a 0x1c3e362e 0x9e2b0f99 0x547e6ba7 ++ 0x6b8169ea 0xbd89401a 0x2cf5ea6a 0x100e6249 ++ 0x47ef40de 0x063a0b33 0xb1f49499 0x3026e75d ++ 0x3b6d951b 0x6212fd9a 0x5073aa23 0x9bd609b2 ++ 0x760cf7bf 0xe6766d03 0xff811dac 0xa461d069 ++ 0xf40e74b3 0xec113577 0xa2cf15e0 0x6f43a20a ++ 0x43f52321 0x96896eb8 0x480c1129 0x35190a4d ++ 0x29a80a08 0x8ce4dd2c 0xf4b40d21 0x2324ef9a ++ 0xf3f2b54d 0x7a0cc79e 0x3e9d973e 0x2d28dd0a ++ 0x1a5e9aae 0x5abb6fab 0x215bade0 0x39e678c3 ++ 0xd6543c64 0x1652e0d4 0xca2f5303 0x0a6879bf ++ 0x24841561 0x05c559e7 0xa1ac6c48 0x3fc52191 ++ 0x29527695 0xb977ce60 0x04589311 0xaff7180b ++ 0xdeb08866 0xd62d8f6a 0xa6f62306 0xfdef1235 ++ 0x1946ad8d 0x1d49fa21 0xac486c1e 0x3ca80491 ++ 0xba8c2a76 0x06ce9ac6 0xcbfbc465 0x675c4ada ++ 0x1eb6b108 0x27d03a7a 0x606144e6 0x2eedb163 ++ 0x64d8d1b7 0xe7695fde 0x75d593a5 0xe7f00f68 ++ 0xc3c45a5a 0x522c4164 0x37833c3d 0xddfda19e ++ 0xd7b9f984 0x77e6ea85 0xd148df03 0x89989155 ++ 0x80fd8f07 0x3adafce3 0xf4e07aa6 0x6ea417b4 ++ 0xd1732fad 0xd13cba8a 0x01729b17 0xb9e666be ++ 0x48addea4 0xffb3a560 0x4a96d730 0x0349777c ++ 0xbf355e6a 0xb5055554 0x22442c5e 0xd8bda1b4 ++ 0xb0a088ab 0xef18b9a6 0x11ecc51d 0xd59247f1 ++ 0xf86fe339 0x17752dba 0x0bfacac1 0xdef25155 ++ 0x035b4275 0x02a3f293 0x8466a5bc 0xf376864f ++ 0x04265d7d 0xc6fc5aa3 0x36adf7ec 0x4e16af5b ++ 0xe3b28d5a 0xa49c6535 0x2b05f03b 0x46d5d914 ++ 0xfcae58a0 0xda644349 0x656d72c0 0x75d47095 ++ 0x302a9fad 0x4e245aaf 0xe2a3e852 0xa9b73076 ++ 0x8d9a2469 0xe7c05607 0x1c17b4b3 0xc2e63302 ++ 0x49fa365d 0xabf1f5dd 0xc850b090 0xdced47ac ++ 0xd60b15d7 0xb25efb14 0x33f9a3af 0xd011cc8f ++ 0xf0414eaf 0xff212e84 0x9e2fbd61 0xf6636285 ++ 0xd892696a 0x6d9ffc34 0x253ad380 0xffb7ed45 ++ 0xaae31520 0xadba81d1 0x7f1e41bf 0xcd7e1eb7 ++ 0x9dabd0e9 0x5de91eeb 0xe9fa68ed 0x3fae0c6a ++ 0x6da21b40 0xac743c3a 0x19228523 0xf5098069 ++ 0xf647fe8d 0x95666621 0xa2a3613d 0xe6278031 ++ 0x6901cfe4 0x3bf132be 0xc3314ee8 0x5b8261b8 ++ 0x9b724149 0xd0838d83 0xb0d05c76 0x57295707 ++ 0xcb11fd8f 0xfdce9b20 0x346449b6 0xe8b44745 ++ 0xc0784ff6 0xe6083a3f 0xb0b87142 0xd2df2210 ++ 0x7b9dc719 0x961585df 0x359390ec 0x0d40e1f0 ++ 0x56436a52 0x8ccb0d80 0x78066e70 0xcfd04ac4 ++ 0xd850a6a2 0x00612831 0x19e74acb 0x5a80989e ++ 0x0d7b151c 0xca9bee4e 0x2fea9d99 0xfdd7ec3c ++ 0x3a73b4e7 0xa70068d1 0x38aff576 0x4c861c14 ++ 0x2e23b093 0x0e429806 0x8cce23dd 0xb0ce104f ++ 0x1684bf8d 0xb2756213 0xa64c594a 0xdd8ee144 ++ 0xda5316cc 0x76dc877f 0xa1c5fe35 0xb5e04383 ++ 0xc9e10000 0x8ac58408 0xf6d7e781 0xbda6cdc5 ++ 0x81517c56 0xdee2ba90 0x3cbfc247 0x4c84887c ++ 0xa722c632 0x4767a4b3 0xe83b79a3 0x7f100150 ++ 0x1074198a 0x220260db 0x1c940f4a 0x92c42619 ++ 0x56dc9f64 0x1c0f7eef 0x3694f4e8 0x5b4b63d0 ++ 0xe784afaf 0xcdcdb039 0xf7040a88 0x47f2d84b ++ 0x143a94b5 0xf68f4fab 0xf6640462 0x3cd6b1c1 ++ 0x7fbe0e60 0x700ee673 0x030e877f 0x60779cb8 ++ 0xddb6933d 0xe46f377f 0x9f9c43c9 0xce0f0d58 ++ 0xe6bf42a4 0xae09f51b 0x295e8cf0 0x140df2b9 ++ 0xfb04c209 0xb6d46f7b 0xa86e0c91 0x64fc624d ++ 0xa7a8760d 0xdac844b4 0xbe1491b0 0xad480684 ++ 0xea874ca4 0x3535e483 0xd49365c9 0x83f2c050 ++ 0x05ec206f 0x7fe3b010 0xb72aadbf 0x40b3a286 ++ 0xafe395a8 0x3506d4af 0x9c4e33e7 0x0259eba9 ++ 0x0daecf5c 0x264c008c 0x898bdada 0x0f3ac833 ++ 0x7ef5f3f8 0x41934050 0xc3bda261 0xab624dd0 ++ 0x5d93609b 0x495a5f1f 0x34119efb 0x3bfd15fd ++ 0x49255da9 0x3ab2d260 0x15ce2006 0xd466d454 ++ 0x3d052ca5 0x567977cc 0x7f8b8657 0xd9b34f42 ++ 0x36c65ff5 0x5f96bffb 0x2d32daf1 0xb301cf05 ++ 0x933435e1 0x316fb1ae 0x48be2982 0x657c3286 ++ 0x1916c189 0xa3a030b5 0xe4c7bce9 0x6a762931 ++ 0x1e90df3b 0xe9084ef0 0x1236cfe1 0x7239326c ++ 0x29bd4dfe 0xaa01cc46 0x93e514ef 0x4e376f6d ++ 0x14087975 0x9cdad6f9 0x86b31bd6 0x2c206281 ++ 0xe178b367 0x4943f013 0x9f97c9dd 0xe848fb0d ++ 0x7d19e49e 0xde4d9b1c 0xee7f552b 0xadea7634 ++ 0x605ab7c5 0xef66b062 0xaf369aec 0x39a96463 ++ 0xb39ed4e0 0xf4c38bbd 0x48565c84 0xcb4ccad7 ++ 0x37b656c4 0xa5291b2c 0xba05d037 0x0027ff97 ++ 0xec2034c9 0xa19abaff 0x99dd50bb 0x44bd5f0b ++ 0x8cc4193d 0xe1dca3f4 0xae2896c9 0x992105a5 ++ 0x46b04aed 0x3ca454cd 0x9a0e86a3 0xfdb3702e ++ 0xf2ddfd7c 0x6b7ca41e 0xe49f2227 0x4839351f ++ 0x201f1173 0xc9af9d40 0x7942ef65 0xf35e5867 ++ 0xe5358390 0x0beff1a6 0xd057a81e 0x89830387 ++ 0xe496a246 0x45007e0b 0x62c34ed5 0xc2170342 ++ 0xa095780e 0x00682a8d 0xfab7e24d 0x207cb6f9 ++ 0x7d5c8058 0xb0164454 0xee8b6d44 0x0aa01190 ++ 0x70637e84 0x1268c1cb 0xf7a1eb80 0xbe90b153 ++ 0xcdc765f5 0x5841d605 0x00141f5d 0x475f8d3a ++ 0xff60a6f1 0x5f7a2e3a 0x30d3f150 0xd9a22f7e ++ 0xdded3241 0xfb05ea5e 0x4093fd88 0xb11f5a9e ++ 0xf1b36594 0xc7579059 0x7f66c5e6 0x8fdb1095 ++ 0x46ff7f62 0x70925647 0x207287e3 0x6bddfe5d ++ 0x240fb596 0xc91784fd 0x28acd7f8 0x7cfbc9da ++ 0x2d6b3cc8 0xf8e9aaf5 0x489616b8 0x9ed70056 ++ 0x586bca94 0x6a95971e 0xa2238b5e 0xc9a06325 ++ 0xb90882a9 0xb5b3ffab 0xae4b2beb 0x5aa0ee34 ++ 0x52e23123 0x9a019e1c 0x84b0f00c 0xba2cf495 ++ 0xca4108dc 0x9272b0e7 0x760b209d 0x3e294274 ++ 0xb8f0316a 0xb666af5b 0xcf436e91 0x365dd253 ++ 0xbf11262e 0xdfa3f8ee 0xd6e0ab96 0xd8a639f8 ++ 0xcba8b31f 0x58940e1a 0xa4bf5e3a 0x7f8cec5e ++ 0xb5ec87d4 0xb7924503 0xe2bff3a9 0xc7ec4445 ++ 0x1e94324c 0xccf28ba8 0x2294b594 0xad297087 ++ 0x18624369 0xa017851f 0xc635302f 0x802becac ++ 0xe631eaeb 0x386589dc 0x780823c4 0x7b989c1d ++ 0x94554d93 0xfc22d343 0xb8edbd0e 0x8bc08005 ++ 0x998a234e 0x507d3976 0xf1f9833c 0x522a2971 ++ 0x2765433f 0xe1ef356f 0xd45d5fd5 0x8d3294d3 ++ 0xabcffdba 0x9b7a6338 0x2f261e1f 0x891fdbd0 ++ 0x67008f6c 0x23d96866 0x057410ec 0x2f360684 ++ 0x8380c618 0xc968f3ae 0x91ac868d 0xdb5cc503 ++ 0xf092b320 0x73ef35c1 0x0fada995 0x56316744 ++ 0xde2290fc 0x7070dee5 0xcf1cd6ab 0xf1a47253 ++ 0x2c53b495 0x8952b433 0xa5b47637 0x9dfe09ae ++ 0x2fb36206 0xcb1dec3f 0xec188994 0x10407824 ++ 0x91f27ffe 0xd461edb0 0xc3779ae4 0xe3f9bede ++ 0x183a107a 0x0122654f 0xe319bba5 0xe75c33cc ++ 0xc657ea24 0xe5490f98 0x653d01c7 0xce09c546 ++ 0x631ea29b 0x81278443 0x0cd4dd3c 0x6b7da4ff ++ 0xacf1363c 0x563ed879 0xe8420e5b 0x43adcc25 ++ 0xc6ff7dd8 0x21e26910 0xa4b4f3be 0xaea31be5 ++ 0xc241c837 0x07178d5d 0x2b69f8b3 0x3bc0b4e6 ++ 0x429c50c1 0xe493ba56 0x5933b099 0x237b2036 ++ 0x0e807425 0xe450e510 0xd72a6007 0xc1459771 ++ 0xe9b22ad9 0xb25e452b 0xeda83668 0xb00e8d93 ++ 0x12b8f351 0x703ed783 0x901c6109 0x72b3e601 ++ 0x099cfb54 0x7fc68f6b 0xda7f436b 0x1dd70c40 ++ 0x5a57914c 0xddc3fe51 0xf1b692dc 0xe8b066bd ++ 0xaa7b0d19 0x4a593520 0xd3bb712f 0x1e1b4c0e ++ 0xe651f456 0x4fd0e108 0xdef8932f 0x3de33c3a ++ 0x4c189801 0x62c607ea 0x708e8086 0xf1b9d204 ++ 0x19656d6f 0x216430e3 0xc8bab24c 0x4ea84e4f ++ 0x659f0cea 0x4e7bad1d 0x7f4d77d5 0xf6d114a2 ++ 0x6d8038b8 0x8d56f1fb 0x2f015191 0x0b3770bf ++ 0xd81e40db 0xfe66c348 0xffd1d3bf 0x07021042 ++ 0x8ce5e26a 0xcdaa21ca 0x1bd4b85d 0xfabd423f ++ 0xba6814e4 0xaa5fe624 0xb2591597 0x81e601e5 ++ 0xf3601f5f 0xf4dbb30a 0x0950789f 0xbe9b1f70 ++ 0x35faf9cf 0x9f27e299 0xf9c1075e 0x09b04ac9 ++ 0x2bb3cb1e 0x8c197668 0x8dffa14f 0xda4a57de ++ 0x5e0f0a9a 0xd1521120 0x31c26430 0x46a75d9c ++ 0x6c7e1a50 0xda1db6de 0xaef50782 0xd32d301c ++ 0xa4688102 0x77c6bc1a 0x3c7e2525 0xcbd4284f ++ 0x5f493a22 0xb35abf25 0xc996f4ff 0x009f0c05 ++ 0x6143581f 0x7a864557 0xd0e1d52f 0x0725f9fa ++ 0xdcc0b294 0xc3609ee2 0x75373ce8 0x1ffd4ead ++ 0x331b82b2 0xfa833542 0x43c00611 0x7ab1215a ++ 0x099bb7f3 0x1c95dc3b 0xbbfb8231 0xf62659ba ++ 0xf9cc6fbc 0x030b6f56 0x793603cb 0xe7c48d71 ++ 0x9754aa20 0x41710095 0x35b92718 0xf464fca0 ++ 0x4ad77ab4 0xd5582574 0xe0552ad4 0x7393e896 ++ 0x34920ff9 0xd0a44180 0x2e523669 0x81d5573c ++ 0x1959ad82 0xfb153a03 0x1cfa615f 0x8b302a87 ++ 0x4e4eea7e 0x21ca24c2 0x5a971dcd 0x788e063e ++ 0x2c9beb8d 0xb3b98af9 0x24079012 0xbdec8a61 ++ 0xc41752df 0x8d2c0a3d 0xe960ac61 0x658cae63 ++ 0x891956fa 0xd0d1a216 0xbc37b8fb 0x5e2c3009 ++ 0xd600a7ad 0x47c7c30c 0x8fbd13f4 0xbae4d97c ++ 0xdd15d643 0x71440bb6 0x3fccfa22 0x1ef82308 ++ 0x2c48907e 0xf6ad303e 0xc1ed250f 0x6f9204f8 ++ 0x19062b0a 0xfe8ab325 0x379e8b1b 0x8116d220 ++ 0xc6d4d8cc 0x624098ee 0x3e6aad4d 0xbce3ace2 ++ 0xba349982 0x7439dd11 0x6ac6d240 0x9f2cf9c6 ++ 0x3dff687d 0xe5b6f2c9 0xbe1645a3 0x39a39bfb ++ 0x7956d69e 0x50d22da6 0xb7e32b7a 0xf4144b4e ++ 0xb94151a5 0xee36b1b1 0xc8cd8d65 0x5e571859 ++ 0x0db49c4b 0xd9d71cd9 0x4bc017ca 0xc81d5130 ++ 0x0c9660c7 0xe4b12b28 0x5549e753 0x97a9fa4a ++ 0x0dac4813 0x7854b977 0x7c8cc619 0xe4166449 ++ 0x020ae016 0x02448146 0xa3924345 0x1542cba9 ++ 0x461583ad 0x7bf66ddd 0xaff59684 0x398b370c ++ 0x5ffbd30c 0x87900806 0x0891afff 0x7aa84ad3 ++ 0x62e35158 0x995e545a 0x6ff3779d 0xa05bdc9b ++ 0x777a7e83 0x53643dc4 0xd77d4704 0x422ec993 ++ 0xabd03cd1 0xcb6ad4b7 0xa94c512d 0x6562975c ++ 0x63b27747 0xecc0955d 0xd965b2b6 0xc67b64c5 ++ 0xfd69b042 0xfe7314c4 0x9f807bbe 0xafaba4d7 ++ 0xbd63eb72 0x811a8901 0x7ea1be4d 0x7316f0fa ++ 0xa6cf004c 0xc17d9363 0xe3fe88d2 0xe60faddc ++ 0x5d3a1b02 0x8a9f1ed3 0xebfb9234 0xbc453cf2 ++ 0x190085ca 0x369a1df9 0x55721790 0xb071a9f3 ++ 0x0697bfc2 0x65753b76 0x177d720f 0x1563979f ++ 0x970c4dd8 0x511aec5d 0x19878647 0xc17280ee ++ 0xe61c4188 0x7a4c0756 0xdb49157b 0x0d461f37 ++ 0xcf0bc73b 0x1c6e7ac1 0x683a9e1e 0x0dd9ae7c ++ 0x72be0902 0x85a22cd8 0x8b98d2dc 0x2f3a9ff1 ++ 0x4540314d 0x3a4e344f 0x3ada6bee 0x3408b829 ++ 0x711ba0cb 0x0c92ae4a 0x621bc5f1 0x908043da ++ 0x8f8ac31f 0xed15f127 0x731dc6d9 0xdc6eb058 ++ 0x6815eb3e 0xaca3d9e0 0xef7b5c61 0xfea2a032 ++ 0xd3c76315 0x0f88f4c8 0x291b8710 0xa5ef8346 ++ 0xcab00448 0x78ef9fb3 0xebf0388d 0x33f2a5da ++ 0xc41190f2 0x0cb6bcf7 0x0afe5680 0xef88d3ea ++ 0xc0e10f4d 0x7e028bfb 0x933657d9 0x6f61fcd0 ++ 0x7e03e392 0x23258472 0xfb16ab16 0xfaf74a5b ++ 0x7ab0a634 0x8346df0a 0xc3c93451 0xdff93a32 ++ 0x3920a816 0xc3331312 0xa6a2270c 0x10025010 ++ 0xa8f4d842 0x36b96367 0x77a30dad 0xe1bd6d0c ++ 0xf3ddb722 0x9412e861 0x4e7cd927 0xef243451 ++ 0x41d7258f 0x6eb34be2 0x026ef296 0x46112337 ++ 0x656c8c07 0x18deff2a 0x5be15cbb 0xbaed3a53 ++ 0xc795a134 0xdcb1350b 0x758b6482 0xc6cd0e88 ++ 0x9be9d4f6 0x1ec7c2da 0xc5c1fe49 0x3e86e8f1 ++ 0x09126f9e 0x96772352 0xa4d5c70b 0xc6f1f2d6 ++ 0x3c22e595 0xd5ccf006 0x48f6167e 0x415dfe21 ++ 0xf49891e0 0xab4c4a7c 0xcd9b336f 0x5777d2af ++ 0x6a8ad930 0x3f47c079 0x72286c81 0x44b565fc ++ 0x5ff87a6d 0x6aad7ebe 0x66535422 0x4dfcef23 ++ 0xc0ffcc8b 0x6e2cfe00 0xf1e7e1f4 0x06e46379 ++ 0xce1bf7c8 0x70fec576 0xe9d0014a 0x844f7b07 ++ 0xb7a27720 0x4a62dde1 0x39207994 0xe12e7ef1 ++ 0x75f2152c 0xec05cfff 0xac67a90a 0xbb9f0c88 ++ 0x8fe2e008 0x58e15130 0xd54c4808 0x71fc616c ++ 0x02564be1 0xf3d121e1 0x904f4a7e 0x7eaa8b70 ++ 0x893d8579 0xeb94b6a0 0x4c84f056 0xebf49f0a ++ 0x2b2fb4cc 0xb6014008 0x1fe0a076 0x9e7af7eb ++ 0xc168be50 0x61653283 0x2016760c 0x57c36535 ++ 0x720405de 0xb4924329 0xb1189d2c 0x9dd8f5c0 ++ 0x2a5f1ab8 0x49580b2e 0xacbbd3d3 0x3261e254 ++ 0x7a827ba0 0xfc91f0bc 0x2b02ba34 0x96edf03b ++ 0xfd7fd36a 0x24edb430 0xafc7e2cb 0x0a8cd505 ++ 0x22ed5205 0xb42ca58f 0x24fc4009 0xf064cb61 ++ 0xa564a202 0xe42a9b54 0xd2a28338 0xca1f1a5a ++ 0xbe51905d 0x9a960bd5 0x4238b656 0xfb08649e ++ 0x76c93495 0xaccc0877 0xc465148e 0xa2bc11d6 ++ 0x84a54419 0x2a2ddd16 0xd9e1d2e4 0x622bbcfb ++ 0xcf0608d2 0x93a26458 0x2b666698 0x0645f585 ++ 0xed3df83d 0xf6e81a41 0xce11e962 0x93c27f84 ++ 0x30f41197 0x659aba68 0x57c01eea 0x2a4cc4de ++ 0xecf2f07d 0x3340329a 0x1084f771 0x9d4c351c ++ 0x32d28528 0xa3b947ae 0x78fce7f7 0x14d0290c ++ 0x7b7ac82e 0x7de381ad 0xa907d620 0xc31ae25b ++ 0x513a2723 0xd8cc3457 0x8fe676a6 0x04039d12 ++ 0xdce5a5ff 0xcc0af574 0x1406d489 0x3393d517 ++ 0x004cfc81 0xeffe2eba 0xf2ee0c96 0xacac4889 ++ 0x6484e7d3 0xdecdce02 0x029dacc5 0x95c52292 ++ 0x0dfaa257 0x7150527a 0x0b59ab84 0x3a915b26 ++ 0x2624fe20 0x46309564 0x704261ba 0xdf434f92 ++ 0x2eb248c1 0x26d555d7 0xc75d81f5 0xbd0185b8 ++ 0xf53b1298 0x059b9353 0x7821a25e 0x4d7fe1cc ++ 0x811b5179 0xe42e22a9 0x4fb78808 0xd6841c31 ++ 0xd9edb88a 0x9b433474 0x1c54ca12 0x4887f63d ++ 0xf1b21006 0x8f7761fe 0x62a15331 0x6b35788c ++ 0x4a5a9edf 0xfdee39c8 0xed95d818 0xe087b392 ++ 0xcdc89907 0x5ee58605 0xd4d7290b 0x46f8d2ce ++ 0x6c9c3f65 0xd129f26e 0xd8cd5b87 0x2bc19529 ++ 0x7ab5b036 0xc44a6fbf 0x76fb68b1 0x6bffe654 ++ 0x482067f6 0xf8ed9d43 0xdad6bd63 0xa9ac77a2 ++ 0x76e6c089 0xe24ba46c 0x420ccbe3 0xfb09b718 ++ 0x83ec3694 0xf76e47d9 0x5f3a8859 0xe85f7fcd ++ 0x61f1d09a 0x35065817 0x88bf5c6b 0xfbb9f76d ++ 0x8b68fca3 0xed95dcb5 0xc2ff7cf1 0x855a2958 ++ 0xf7d28d92 0xb61802f7 0xf9814028 0xac8703c5 ++ 0x4ce8c7cd 0x1876cfe3 0x851c045a 0x56b3d146 ++ 0xe7abf1e7 0xdc46d720 0xd1e35c3a 0x2243ff60 ++ 0xc257c828 0x16513009 0xcb797d5d 0xe0f2cb11 ++ 0xf7e40b66 0x721e0495 0xce72e9b7 0x32eeedcf ++ 0xf5dc5e01 0x355de93e 0xc20ad627 0x95aa436a ++ 0xe69cab2b 0x511fef1c 0x18522a80 0x203e240f ++ 0x882fb1f6 0xfed4db9a 0xa4bf7193 0x420df144 ++ 0x84791341 0xdb4767a1 0x8c0b40fb 0xcfa5c5d2 ++ 0x2783cad4 0xcf8dd48c 0x051037a0 0xc2994140 ++ 0xaf2a0a2e 0x29619774 0xffd83edd 0x1e346b24 ++ 0xb058a539 0x8118011a 0xb1722fcf 0x4f89c7b1 ++ 0x0e6f2f4b 0xdb155d1d 0x21d21cf9 0x25ba315b ++ 0x7a17b541 0x3f23c32b 0x301e0881 0x9b0ad7f7 ++ 0x8adfccee 0x6c2f2975 0xbc9c318d 0x8d220d3b ++ 0x33d2d0c1 0x5bc2dbf5 0xe0290856 0xedd38c75 ++ 0x56642fea 0xf7f5609b 0x5bdb0058 0x511dfc07 ++ 0xc6b0b515 0xeac6f4af 0x7da3a898 0x50452011 ++ 0x4668042b 0x4055890e 0x7bd41459 0x9b98f96a ++ 0xc516cb64 0x15313f77 0x04f6816a 0xd622931a ++ 0xbe2be61e 0xd549a421 0x380373c2 0xabb7123d ++ 0xc54b9d3b 0x5a130630 0xafff90c4 0x50f5b4ce ++ 0x75b0ecf0 0x16078950 0x44d547f1 0x8353af66 ++ 0x587bb496 0xf8f3c68a 0xd3b06119 0xef05594d ++ 0xd403c928 0xf12b06bf 0x2b78eb2d 0x7de9106d ++ 0x4966726e 0xa8b5ef1a 0x1c42a3f6 0xd55aa69b ++ 0xe409c51f 0x93533259 0xc6d9dbf5 0xb4d63a17 ++ 0xaaf73aaa 0xe485f5d5 0x753f0d34 0x1a3e6dde ++ 0x41183e36 0x2ec20e27 0x6b66bead 0xfc5f1d42 ++ 0xfecdf91f 0xb7066b78 0x8ed6da1c 0xbbeb87d7 ++ 0x8a72de9b 0x1e0e2f97 0xc377f532 0xedbdeb81 ++ 0x0f5b9e33 0x6ae7ebf2 0xca7440df 0xe9c3eefd ++ 0x4bd50433 0xc25a6b95 0x9d2bd1e2 0x70709639 ++ 0x9050c202 0x7cbd2f1d 0x41443fa5 0x63dd89b1 ++ 0xb2607a0e 0x88c1417d 0x1631dbb0 0x13508ae3 ++ 0x4e78d90c 0x19811ae0 0x4bc827fb 0x459a55aa ++ 0x52c0fd8d 0x8359500c 0x6a886312 0xbe704e33 ++ 0x441b7c24 0x5121c79c 0x86066830 0x1a0d013f ++ 0xe78bfa0b 0x3f9e3ffc 0x7b3abb16 0xfc24b9ee ++ 0x4f543a26 0x0619ad49 0x6a20077e 0xc8191371 ++ 0xd1d2876f 0x8b83645d 0x48330de1 0xe132ea1a ++ 0xdc077f5a 0xfd14dd79 0xf606c198 0xec47c478 ++ 0x17c3f14f 0x334fd708 0xe39cf072 0x39f543c2 ++ 0xebab93a2 0xf7febed4 0x79971f6b 0x888858d4 ++ 0xdfd11199 0xafe72dfa 0x13f30ff8 0x6141ada3 ++ 0x5fe75eb0 0x75dcecd6 0x70fb1b33 0x073f9823 ++ 0x7afb726d 0x04b10ea5 0x6c881a5b 0x945a5c69 ++ 0x2ecb950a 0xb384f045 0xe5eb9ac8 0xa46dfd3b ++ 0xb8185584 0xc095b417 0x86173c80 0x6a509180 ++ 0x4eddcc32 0xf408ac80 0x0833ae99 0x58ca79b2 ++ 0x2eac5d79 0x85c2deb7 0x400e6a01 0xdc6caa56 ++ 0x706176e7 0xa5dadc8f 0x0d4969de 0x259553d9 ++ 0x52425195 0x7d074da3 0x784ef596 0x8580e28c ++ 0xbaa52874 0x71abf00e 0x8434cb32 0xc3a8ffe2 ++ 0x6ec52581 0xa4cd744f 0xd5820757 0x7e257e4d ++ 0xb7428f60 0xb55fd824 0xd454c529 0x8de72e07 ++ 0xf84abcb4 0x30b7c926 0x5140a1d2 0x4e9550c6 ++ 0x18826ed6 0xf561a8eb 0x28c7cde6 0xe91022ea ++ 0x73cdc0ef 0x32bea752 0xc7a0138d 0xa0af6cd3 ++ 0x52c4736d 0x0b459241 0x2156a8d8 0x0d32a2ad ++ 0x49bb6600 0x8752c2bd 0x45d0a0ec 0xc89f9bc3 ++ 0x76d775a6 0x963f0a6b 0xb5d100fc 0x2731528b ++ 0x2719d1a1 0x2b201af5 0xc337ea7b 0x70ce1c8f ++ 0x8cb21437 0x9869038c 0x53e9458e 0x624904e5 ++ 0xcb7cdad7 0x13b9bba7 0xc66ec1ae 0x86bbb14d ++ 0x018c25ad 0x88573452 0x4165b4bd 0xa719f640 ++ 0xd4b8227a 0xdace857f 0x701c449e 0xa835c09e ++ 0xef8e4608 0x72ec0d91 0xe88703ac 0xb6470c3d ++ 0x0cae0aff 0xae650f6c 0x384c382e 0x5d4b6275 ++ 0x6691c449 0xfba67785 0xe3a5b7b7 0xfb72c85e ++ 0x09056be6 0x15e28bd0 0xb6be7e9e 0xd97fac13 ++ 0x1e6023bc 0x0f28cfbd 0x840eeee5 0xd208ac51 ++ 0x12b36d98 0xd28885de 0x108c3e86 0xff2ae965 ++ 0x09b446c4 0xe453ba28 0x42c997ac 0x880e22f3 ++ 0x0eeee913 0x5a0c9803 0xf080f33c 0x47e99f76 ++ 0xa62e02f6 0x38283513 0x5ecad92f 0xaef2a1eb ++ 0xa5cdc2c5 0xd5e6ae58 0x03dbffd9 0xc24ddb4f ++ 0xaaeecc9d 0xdbeb2dfc 0xfda7e5a0 0x8e537029 ++ 0x8ae38058 0xfce24682 0xcdd46b74 0x0cc2b384 ++ 0x89cd2e8b 0xe955abd6 0x82c64f39 0x716c7713 ++ 0x70dbaa6c 0x271b7a9c 0x332e6234 0x8d081fed ++ 0xb47ac8d3 0x818af259 0x6d97d09f 0x7aaca213 ++ 0x2124cd22 0x70fc4cbc 0x02988745 0x29e28390 ++ 0x2b11e888 0xe62b3826 0x8c6260e9 0x2b2d9036 ++ 0xc3cd85c3 0x3a08e1a7 0xf406364f 0x6ff5f0d9 ++ 0xc0c2a847 0x076cac4b 0x85eea1ab 0xbe6d6dbc ++ 0xdffbd36d 0xf1bb8934 0xae696cac 0xfe51475b ++ 0x6bce710a 0x83d6ff0d 0x44cb120f 0xd0c01d5a ++ 0x997f8469 0xdaad8626 0xdff160f7 0xf2954b72 ++ 0xd4efa312 0x07035ee6 0x03e8dbb0 0x5a33d382 ++ 0xc6527dc6 0x0b7391a3 0xfe568e01 0x24c28c70 ++ 0x76e65ea0 0xeafaf171 0x1ab4ebfa 0x4ff66462 ++ 0xc9949824 0x776d25fe 0x3689d8f9 0x1ec65a2c ++ 0x746581f5 0x227209d2 0xbff7bc69 0x91b4c927 ++ 0x171c5962 0xb4dd5f85 0x72e4917a 0xd01ff1af ++ 0x9c6ba703 0xdb9d9be6 0xae1cf2c5 0x48b85c21 ++ 0x9628b693 0xa8d2e2f7 0x856584db 0x1b33821e ++ 0xff5de311 0x4126d04c 0xf00ac027 0x54bdaa98 ++ 0xa3dd5b0a 0xce2b2558 0xea5f50d8 0xb2e88f18 ++ 0x19590981 0x6dae2c0a 0xbfd758bc 0x2897e93c ++ 0x3ba5d054 0x2d809b4c 0x3de6aa52 0xea171509 ++ 0x7d8b7b44 0x19a1ad1c 0xe99b2657 0x98ac56e9 ++ 0xc2150187 0x63a12506 0x4ffc1739 0x50e2ca6c ++ 0x4f2ff10c 0xb7323ff6 0x81d9f57a 0x5146beee ++ 0xa1f45456 0xf6ce5d75 0xdff7be9a 0x75ab2dc9 ++ 0x5ff2901a 0xec756ab3 0x8a5e0299 0xc4e248ce ++ 0x248502e8 0xd8c62cf1 0xc7001b23 0xf7c636d2 ++ 0xefbb67e1 0xec507025 0x1820ac19 0x39e1624c ++ 0x4ee603b2 0xb70e1c67 0xaf9376fc 0x371af05b ++ 0xa19209fe 0x8ecdf499 0x9a607cb2 0xcbe61a2c ++ 0x9f4e950c 0xb9a1546f 0xe718f140 0xc75d5d02 ++ 0xabe66af2 0xecc54d7b 0xb4373489 0x22254496 ++ 0x4b4b7f7c 0x40dde60e 0xfe621a3e 0xa6605c67 ++ 0x5cf6a3a2 0x75df88a3 0xbf0749b0 0x705a0a04 ++ 0xf3cae078 0x392bdebd 0x98878e65 0x0f5a2be5 ++ 0xec172835 0xf610cc90 0xac6ff369 0x0a71c173 ++ 0x8eae2d62 0x2ccbb630 0xd3b702ea 0x1626bfff ++ 0xdb4a6975 0xd2a936f7 0x0bb63194 0x5d9120dd ++ 0x5860e04e 0x3baeca91 0x95a621db 0xa6d23aaf ++ 0xfebcfa2d 0xa5ed89cf 0x2192280a 0x72322cb8 ++ 0xd79e14d2 0x0528ce06 0x1c6a8f9c 0x6703407c ++ 0x93819694 0x6c554390 0x7875452a 0xf45d2757 ++ 0xe0458d1d 0x335f6179 0x48989cc9 0xdc16cec8 ++ 0x9e2c0ee5 0x78daabe2 0x2069e8eb 0x0e87f238 ++ 0x0a928dda 0xc66e14b3 0x2a6c4031 0x73821630 ++ 0x8b8c4a40 0x243702b7 0xded80901 0x5de34802 ++ 0xea029b73 0x59a47771 0xe747d796 0xe80aea8d ++ 0x0bd01815 0x76fe1f68 0xa345fc34 0x73737383 ++ 0x76753b6c 0x57dcba56 0xb11d6b21 0x81dc371e ++ 0x311f4ea0 0x3b4b2522 0xe8a66ef4 0x1932df0c ++ 0x9f3790d6 0x0d0478a3 0x7dd0a24b 0xeb581381 ++ 0x6fe8ff06 0xe34c2d69 0x26842e15 0xe9a39562 ++ 0x78f2d7d1 0x79ab33f5 0x197df69c 0x38a9a004 ++ 0x9391dba9 0xfbb4b7c5 0xa97bb70f 0x0720b57b ++ 0xd9b26325 0x3ed1a3fc 0x11f5aba0 0x6e6a53ef ++ 0xe2ce236e 0x30994468 0x9d4369cd 0xcb6b5b5c ++ 0x61a0945c 0x090e7dea 0x5d9b676a 0xd474cb52 ++ 0x8ebf1af3 0x35f2a70b 0x417d48a0 0x45062dcc ++ 0x841d8d90 0x30f8e590 0x1c935ad3 0x29313e0c ++ 0x46ecf673 0x4998b596 0x95f23529 0xf31bd581 ++ 0x1b32045a 0x90432d28 0xa2a6c268 0xbf40fcae ++ 0x4104b314 0x02677221 0xa99231ac 0xe28abada ++ 0xd7d72a73 0xf1b2ce4c 0xf753f8be 0x9d7fc1c7 ++ 0x9a0e7a7a 0xf04ccf32 0x58433f5f 0xab9a6d51 ++ 0x71262b1c 0x48f84d91 0x897670bb 0x47dd10cb ++ 0xac7ef74d 0x78dc3e54 0x30b17eaa 0xc8f46618 ++ 0xc636fe3b 0x86ac06e3 0xfb8edd16 0xed357170 ++ 0xbfd34bf8 0xaeb9571a 0x4eec6a50 0xe881a1b7 ++ 0x8a1cbbde 0xc6c077b6 0xaeda1441 0xf990296a ++ 0xc91e87d6 0xad0ca921 0x855537b6 0xfc0da57d ++ 0xf8427d87 0x9ece7413 0xc5d4b4c9 0x2fca7822 ++ 0xa1888443 0xd3bf617e 0xab21ce7d 0xe63b5f53 ++ 0x828501c5 0x81a39da9 0xb8cfb4c6 0x6b23b8dc ++ 0x853fe425 0xba262321 0x34f11b05 0x8044aea4 ++ 0x67a3f99d 0x51e8afb7 0x04efcf27 0x7773f9ff ++ 0x8abceec1 0xd75d87a2 0x7e30d774 0xdd7a42f2 ++ 0x2ca6ad73 0x27d4e62f 0xbc228d26 0x035a7713 ++ 0x5dbcc13a 0x792a97da 0x56cf9fc2 0x5906fa3e ++ 0x97a3147c 0x85e59863 0x19ad1f49 0x1af659a8 ++ 0xddc6a273 0xd254a195 0x44d83a00 0x3b7c5fa7 ++ 0xcaf756aa 0x68ad08b9 0xfc57da12 0x3b278f24 ++ 0xbd165574 0x3cf597ca 0xdeb872ba 0x543eb2f5 ++ 0xfabc0d4f 0x0799c544 0x3d71181d 0x22c8a598 ++ 0xb82840fc 0x1a198d19 0xf529a0ea 0x2f65bc24 ++ 0xe979f99d 0xff8617b4 0x376e5abb 0xb095a03e ++ 0xa36b1107 0x2dacf004 0xe4c565e1 0xc96463cd ++ 0x3b495e2d 0x4a2c2cd7 0xa0053fc2 0x6c82a085 ++ 0x6b801c45 0xc1481d77 0x6d95dc15 0x44dc8bf6 ++ 0x3eed7d25 0x901a6b49 0x2797e953 0x502ad2c3 ++ 0x8491c3f2 0x3ce059eb 0x992c1a76 0x6c56d2a2 ++ 0xcf1878a7 0x10574487 0x5a2f85e6 0xf94e418e ++ 0x4c149aed 0x9381b5a3 0x79c90da4 0x635e696e ++ 0x243073ba 0x67504105 0xe82ac957 0xaccda7b3 ++ 0x29bdd624 0xd0c1533c 0xbc080065 0x8d617329 ++ 0x27e6f74a 0x31e87692 0x50a3857d 0xc5b1ec3f ++ 0x4f03be5f 0xa35fde17 0x537a59bb 0x793d1eb5 ++ 0xc11a0588 0x067e5593 0x102532c3 0x4024b312 ++ 0x32504cf4 0x4ddc0e9a 0xad5b1d24 0x41081874 ++ 0xf94fced4 0x16f39da6 0x9bdfbe58 0xc5615db4 ++ 0x1fdd769d 0x4278b52e 0x4525b8b6 0x7feed258 ++ 0xe0b4348b 0xb4925ccc 0x5547cc88 0x3f7f5443 ++ 0x5b8cc6d3 0xbe6a15cf 0x7308c088 0xde4219df ++ 0x4685593c 0xc4ae83a3 0xaea72ff0 0x403b0c08 ++ 0xe533a9aa 0xed46be76 0x4390bcd0 0x683a9f3f ++ 0x338b5cd3 0x7cd59689 0x2eb11aec 0x74e91cfd ++ 0x7ae588aa 0x0eadf94e 0x30a6b42f 0x1965f165 ++ 0xd96de54b 0x06c85abf 0x1bbc0ab8 0x79f3ddd0 ++ 0x871fd58d 0x498dd69d 0x9197dd0e 0x6cbb3a4f ++ 0x8a1f2a01 0x0d9cf747 0x80e66655 0x770d2b25 ++ 0x567bd3eb 0x59583c5a 0x58afeddd 0x9296d0e3 ++ 0xcf5af62c 0xf48b4c78 0x746f657e 0xe543b903 ++ 0x24603809 0xd1bceeea 0x16d04950 0x2a7c754b ++ 0x4ea8bb99 0x9daecb97 0x3045b9a9 0x4a3e84d9 ++ 0x5487e79f 0xd6145e57 0xc3b17f6f 0x14448bb6 ++ 0x8e8529f5 0xf895acb9 0x6605c0f0 0x52d00ca9 ++ 0xabf6e3e9 0x8f36e307 0xa7a15442 0x55144801 ++ 0x69b028b2 0x8ab3b912 0xb493f80e 0x2dc9fdfa ++ 0x1b091fbf 0x1bce6b31 0x79eb414e 0xe5f86ea0 ++ 0x39ef7dbd 0x2f86faf0 0xec366923 0xe770c7be ++ 0x74e4aa61 0xef3b9da0 0xd77bd8be 0xfd13d3cb ++ 0x4e8023c6 0x3d993904 0xfcb2f700 0xa14b753b ++ 0xde16c1c3 0x983c5a86 0x52ba5e61 0x1d67b044 ++ 0x0f9a302d 0x2f13b653 0x769cbb97 0xea3e1cbd ++ 0x5791778c 0x540fcff1 0x5e6c53f2 0xc9cbac0f ++ 0x40ceadf0 0x648713d3 0xb5347ada 0xfe280079 ++ 0xb8389f3f 0x5a6be26a 0x8e683d28 0x6a3e8e3a ++ 0x97ecac7a 0x70b648f1 0xe4eca20e 0x088cd0b4 ++ 0xbad30405 0x0f77e382 0x673cdf65 0x438af1f0 ++ 0x0b4f4eea 0xf0cc34e9 0x374a3c04 0x4370d27d ++ 0xc3e1e84d 0x141205c2 0xfa831e8d 0x32f2f10a ++ 0x77899366 0xc9d07590 0x9b6f2286 0xcac96a03 ++ 0xf822808b 0x265606cd 0xbeef275d 0x73415b15 ++ 0x4c87250e 0xf95a8c8a 0xdc8d6166 0x68522e63 ++ 0xb9becc14 0x7b5f20be 0x3d158dab 0xa73b1716 ++ 0x3b2cac15 0xf0498939 0xb60653bf 0x33fafc0e ++ 0x3b416955 0x3addca50 0x16ab21cf 0xd18cbdb6 ++ 0x3b29b87b 0xa6fb7e4b 0x6634147f 0x44283b1e ++ 0x430ae726 0xa907ab82 0x2baa6706 0x621d2390 ++ 0x15944559 0x2516c807 0x7d1eeb61 0xe2714121 ++ 0x288d3998 0x47713cbb 0xa1ce3c1e 0x0c29b6dd ++ 0x9923131c 0x2dd19cfa 0x83d0ece5 0x78474c7b ++ 0x92dee4f0 0xba5cb0f7 0x780c1d41 0x50da5a89 ++ 0xe303cebb 0xe8d5a2bd 0x7d6269a9 0xb75484f1 ++ 0x33ee8186 0x085b7657 0x7b1c7863 0xdb1a43ce ++ 0x3d0c4bf0 0x302c1292 0x81e42216 0xee1f2c9d ++ 0x822451ab 0xcefd8067 0x8330dc41 0x14492542 ++ 0xf038f54d 0x90a1abf9 0xc3067a77 0x40d9a42c ++ 0x127285c1 0x80ad15ff 0xaf4854e2 0xa47874f4 ++ 0x2ed59760 0x67252c6a 0xe2830f38 0x8150c00c ++ 0x16f61cca 0x1331f815 0x2d832d17 0x163c6010 ++ 0x69464e2f 0x99940411 0xbce5e85f 0x43d39ef2 ++ 0x9b7224dc 0x28652b6d 0x331a7632 0x127f669e ++ 0x44a034ad 0xe95d2cec 0x3d83fefb 0xfa6d40a2 ++ 0x9b535bf4 0xc83411ce 0xd661655b 0x64bcd8d2 ++ 0xd99e1570 0x7dc4d877 0x9756b210 0x7623dc0d ++ 0x484dd33f 0xe7bca204 0xa06efbc5 0xa358c03f ++ 0x362cb282 0xe40e6d04 0x17ab9f5e 0x79a71a09 ++ 0x804bf1a9 0x6bca7d73 0x5504a4ff 0xd3946f75 ++ 0x18b0b9d4 0xd85993cc 0x94d000a5 0x8dda1609 ++ 0x30afb8f6 0xb3c99c3c 0x7686d59d 0x68b719db ++ 0xdc7b3edb 0xedb76012 0xbfa0ba3b 0x280b829d ++ 0x72fcf1aa 0xe3d8f83c 0x088a57cf 0x95156217 ++ 0x3306eb47 0x1d09cf54 0x1391876f 0x5b15ecde ++ 0xb46104e1 0x8d8f2593 0x90ee50cc 0x78dad4b2 ++ 0xfd96daee 0xdbf15e95 0xfc859faa 0xdb4422a5 ++ 0xa00eeab6 0x525232c6 0x9b665668 0x8a70518b ++ 0xbb27f7ac 0xb066b096 0x25754db6 0xe8c7d748 ++ 0xd4e8d361 0x380dd246 0x9bdf15e6 0x6823c660 ++ 0x5d408fe7 0xe59a5a89 0x1eb7523b 0x4997158e ++ 0xfa6214d2 0x03b35025 0x9aeff33c 0x20a38aad ++ 0x522f79cd 0x4141f19c 0xc58cd2bd 0xc816da37 ++ 0x62c6f8d9 0xc15ea9f4 0x138d1f45 0xd36cef03 ++ 0x88183bd6 0xe0de9036 0xefcbe8fc 0x5ebdce26 ++ 0x9e83b01b 0xd35f6747 0x552951f1 0x4e20dd66 ++ 0x419702b1 0x45446e7c 0x7ce5616b 0x6152e3a8 ++ 0xffd572e1 0x4fab25b0 0x07563b80 0x98720ee7 ++ 0x176d29bf 0x21cbd730 0xbde74431 0x09a8cce2 ++ 0xc15e548e 0xe6a92b4b 0x14f17e74 0x75f7817b ++ 0x592143e8 0x113dbd25 0x5f7d7160 0xbdd8b1e0 ++ 0x6ce045e5 0x53b27b2d 0x371c8aa8 0xa4da8be0 ++ 0xf1f6df4e 0x9519bac4 0x6d6169cf 0x7846253f ++ 0xccb95d95 0x6ad11a98 0x4a3bd21d 0x5389f44c ++ 0x7c07ef3a 0xb983ca57 0xcf7f290d 0x4ec516f1 ++ 0xa7711e70 0x818d45a9 0x49db6441 0xd032fc2a ++ 0x657df4d3 0xe37e6809 0x459a22da 0x41df8aa5 ++ 0x462108a6 0x65177d27 0x1ddffa9f 0x7fa6631b ++ 0xdd7a414c 0x6351f0d1 0x1b38a419 0x6b529c8e ++ 0x167745e4 0xcac35897 0x3d7bf419 0xd59ed67a ++ 0x6486b2c9 0x9ae4fc90 0x8f608920 0xd35335c0 ++ 0x8f113cba 0x0fcc11a1 0xdc180fbf 0x57a99319 ++ 0x2c54185f 0x764c18d0 0x4f84b111 0x30a11040 ++ 0xd15620af 0x496af145 0x263b2de2 0x3ff103dd ++ 0x38484dac 0xf143a3bc 0xb62c0de6 0xb122c545 ++ 0x72f10466 0x63728442 0xee0117c9 0x2309f14b ++ 0x4ccdd5de 0x37ae022d 0x2ee7f050 0xf2aa9af6 ++ 0xcd314a20 0x86954941 0x97215303 0xcd7e1687 ++ 0x1dab6672 0x1c920209 0x41102dae 0x8b21c8ab ++ 0x6f70b04b 0x2988b209 0x86e6f033 0x5eb91718 ++ 0x925b3c40 0xdcad0288 0x0ee98331 0xc3096ceb ++ 0x9fa04740 0x3ce3fb23 0x90d75cbd 0xeab21768 ++ 0xaca5db0a 0x1c440578 0x762cb728 0x315a699f ++ 0xcd2b6490 0x11e3e267 0xa10d1bbc 0x23ac26d3 ++ 0xc0c7c268 0x37ecf7ac 0x28de6fe5 0x6fb8e3e8 ++ 0x583d1131 0x8370812a 0x3afd5d58 0x4569a06e ++ 0xf27ad86f 0x0db6a631 0x9add5128 0x1748c9fd ++ 0xc46e3c57 0x4c0df93e 0xc595c544 0x397f7e7e ++ 0x241f4086 0x7d7ed51b 0x56027473 0x656a6110 ++ 0x970a8011 0xf9c7beb5 0xc6cb9957 0xb7426461 ++ 0x62d3d89d 0xf99d48ca 0x3e4d4a88 0x9f751b71 ++ 0xfa020205 0xa3124337 0x59935869 0x98c58314 ++ 0xff7c4385 0x69191265 0xaf85ebb9 0xe434cda2 ++ 0xb1ad3e0e 0x221d32e1 0x022d73a0 0xd676ce06 ++ 0xab7f0c21 0x915c2444 0xf5bdaba2 0x74e4e789 ++ 0x11ff0d95 0x58c53feb 0xa54eb847 0x9af982ae ++ 0x8d721596 0x73510fe4 0x95e3bd19 0xd82f8359 ++ 0xc09cdd5b 0xc07f57a4 0xbece605b 0xa8a43c5b ++ 0x0acbeb6d 0x3c5cd8ce 0xb631050d 0xd558c921 ++ 0xcb5054c2 0xefb06252 0x40d2e2cc 0x14ffe6ff ++ 0x761001a9 0xad64e7a5 0xb55618b4 0x2a40a1fc ++ 0x2cbe6d40 0x2bc18fc1 0x196e7092 0x3c137791 ++ 0xa799eb23 0x1156feb9 0xd55d7ed1 0x0149c315 ++ 0xae77081f 0xfe724690 0x55ed2fd7 0x04b18cd7 ++ 0x691583f4 0xb1be4fde 0x19ae1cf7 0x3250140b ++ 0x35daeeb2 0xc9459a84 0xea2c19e1 0x57f8c9cb ++ 0xe05e07a4 0xcc77a363 0x43afd702 0x48305862 ++ 0x6c4b459f 0x66ed6178 0x26be9f81 0xeac41ee5 ++ 0xbe5e2e6b 0x177f9068 0xede56c48 0x438b3811 ++ 0xd5bd7ee4 0xc027d1a8 0xc1c0f725 0x48d4d4eb ++ 0x6ffa28d5 0xbd6ac9eb 0xd497781d 0x24d3a154 ++ 0x409bb5c0 0x8079bf76 0x90a522dc 0x19bf7033 ++ 0x1a529b6e 0xe5207e4d 0x3d49b7bc 0x3eca6d54 ++ 0xa37681a6 0xaa9a62e4 0xe54aa1e1 0xb91e7157 ++ 0x8cce8f65 0xbcbbd62c 0x7fa477b5 0x44f46b50 ++ 0x54263fcf 0x529cbb5d 0x8923e390 0x0778d6d7 ++ 0x0cc0503f 0x02c374ce 0xb89c3e5c 0x25b1b353 ++ 0xb227cb2d 0x44108698 0x5e5968c2 0x82c48632 ++ 0x0b8f4209 0x1a241879 0x9edca6f1 0xa1fa51ab ++ 0x206db0c6 0xbfbbbe98 0xa71c91f6 0xa1b28056 ++ 0xb8bfaaa9 0xa5914f75 0x77d26574 0xacfd459d ++ 0x77f7cab2 0x249ebf26 0xef902bdd 0x77f6e48d ++ 0x82497035 0x93333a9d 0x34ea9953 0x8f08d41c ++ >; +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-coreboot/gpio.h u-boot/arch/x86/include/asm/arch-coreboot/gpio.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-coreboot/gpio.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-coreboot/gpio.h 2015-01-01 17:34:32.253503252 +0100 +@@ -7,4 +7,7 @@ + #ifndef _X86_ARCH_GPIO_H_ + #define _X86_ARCH_GPIO_H_ + ++/* Where in config space is the register that points to the GPIO registers? */ ++#define PCI_CFG_GPIOBASE 0x48 ++ + #endif /* _X86_ARCH_GPIO_H_ */ +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-ivybridge/gpio.h u-boot/arch/x86/include/asm/arch-ivybridge/gpio.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-ivybridge/gpio.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-ivybridge/gpio.h 2015-01-01 17:34:32.253503252 +0100 +@@ -7,4 +7,7 @@ + #ifndef _X86_ARCH_GPIO_H_ + #define _X86_ARCH_GPIO_H_ + ++/* Where in config space is the register that points to the GPIO registers? */ ++#define PCI_CFG_GPIOBASE 0x48 ++ + #endif /* _X86_ARCH_GPIO_H_ */ +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-ivybridge/pei_data.h u-boot/arch/x86/include/asm/arch-ivybridge/pei_data.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-ivybridge/pei_data.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-ivybridge/pei_data.h 2015-01-01 17:34:32.253503252 +0100 +@@ -7,6 +7,8 @@ + #ifndef ASM_ARCH_PEI_DATA_H + #define ASM_ARCH_PEI_DATA_H + ++#include ++ + struct pch_usb3_controller_settings { + /* 0: Disable, 1: Enable, 2: Auto, 3: Smart Auto */ + uint16_t mode; +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,55 @@ ++/* ++ * Copyright (C) 2013, Intel Corporation ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: Intel ++ */ ++ ++#ifndef __FSP_API_H__ ++#define __FSP_API_H__ ++ ++/* ++ * FspInit continuation function prototype. ++ * Control will be returned to this callback function after FspInit API call. ++ */ ++typedef void (*fsp_continuation_f)(u32 status, void *hob_list); ++ ++struct fsp_init_params { ++ /* Non-volatile storage buffer pointer */ ++ void *nvs_buf; ++ /* Runtime buffer pointer */ ++ void *rt_buf; ++ /* Continuation function address */ ++ fsp_continuation_f continuation; ++}; ++ ++struct common_buf { ++ /* ++ * Stack top pointer used by the bootloader. The new stack frame will be ++ * set up at this location after FspInit API call. ++ */ ++ u32 *stack_top; ++ u32 boot_mode; /* Current system boot mode */ ++ void *upd_data; /* User platform configuraiton data region */ ++ u32 reserved[7]; /* Reserved */ ++}; ++ ++enum fsp_phase { ++ /* Notification code for post PCI enuermation */ ++ INIT_PHASE_PCI = 0x20, ++ /* Notification code before transfering control to the payload */ ++ INIT_PHASE_BOOT = 0x40 ++}; ++ ++struct fsp_notify_params { ++ /* Notification phase used for NotifyPhase API */ ++ enum fsp_phase phase; ++}; ++ ++/* FspInit API function prototype */ ++typedef u32 (*fsp_init_f)(struct fsp_init_params *params); ++ ++/* FspNotify API function prototype */ ++typedef u32 (*fsp_notify_f)(struct fsp_notify_params *params); ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,24 @@ ++/* ++ * Copyright (C) 2013, Intel Corporation ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: Intel ++ */ ++ ++#ifndef __FSP_BOOT_MODE_H__ ++#define __FSP_BOOT_MODE_H__ ++ ++/* 0x21 - 0xf..f are reserved */ ++#define BOOT_FULL_CONFIG 0x00 ++#define BOOT_MINIMAL_CONFIG 0x01 ++#define BOOT_NO_CONFIG_CHANGES 0x02 ++#define BOOT_FULL_CONFIG_PLUS_DIAG 0x03 ++#define BOOT_DEFAULT_SETTINGS 0x04 ++#define BOOT_ON_S4_RESUME 0x05 ++#define BOOT_ON_S5_RESUME 0x06 ++#define BOOT_ON_S2_RESUME 0x10 ++#define BOOT_ON_S3_RESUME 0x11 ++#define BOOT_ON_FLASH_UPDATE 0x12 ++#define BOOT_IN_RECOVERY_MODE 0x20 ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,154 @@ ++/* ++ * Copyright (C) 2013, Intel Corporation ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: Intel ++ */ ++ ++#ifndef __FSP_FFS_H__ ++#define __FSP_FFS_H__ ++ ++/* Used to verify the integrity of the file */ ++union __packed ffs_integrity { ++ struct { ++ /* ++ * The IntegrityCheck.checksum.header field is an 8-bit ++ * checksum of the file header. The State and ++ * IntegrityCheck.checksum.file fields are assumed to be zero ++ * and the checksum is calculated such that the entire header ++ * sums to zero. ++ */ ++ u8 header; ++ /* ++ * If the FFS_ATTRIB_CHECKSUM (see definition below) bit of ++ * the Attributes field is set to one, the ++ * IntegrityCheck.checksum.file field is an 8-bit checksum of ++ * the file data. If the FFS_ATTRIB_CHECKSUM bit of the ++ * Attributes field is cleared to zero, the ++ * IntegrityCheck.checksum.file field must be initialized with ++ * a value of 0xAA. The IntegrityCheck.checksum.file field is ++ * valid any time the EFI_FILE_DATA_VALID bit is set in the ++ * State field. ++ */ ++ u8 file; ++ } checksum; ++ ++ /* This is the full 16 bits of the IntegrityCheck field */ ++ u16 checksum16; ++}; ++ ++/* ++ * Each file begins with the header that describe the ++ * contents and state of the files. ++ */ ++struct __packed ffs_file_header { ++ /* ++ * This GUID is the file name. ++ * It is used to uniquely identify the file. ++ */ ++ struct efi_guid name; ++ /* Used to verify the integrity of the file */ ++ union ffs_integrity integrity; ++ /* Identifies the type of file */ ++ u8 type; ++ /* Declares various file attribute bits */ ++ u8 attr; ++ /* The length of the file in bytes, including the FFS header */ ++ u8 size[3]; ++ /* ++ * Used to track the state of the file throughout the life of ++ * the file from creation to deletion. ++ */ ++ u8 state; ++}; ++ ++struct __packed ffs_file_header2 { ++ /* ++ * This GUID is the file name. It is used to uniquely identify the file. ++ * There may be only one instance of a file with the file name GUID of ++ * Name in any given firmware volume, except if the file type is ++ * EFI_FV_FILE_TYPE_FFS_PAD. ++ */ ++ struct efi_guid name; ++ /* Used to verify the integrity of the file */ ++ union ffs_integrity integrity; ++ /* Identifies the type of file */ ++ u8 type; ++ /* Declares various file attribute bits */ ++ u8 attr; ++ /* ++ * The length of the file in bytes, including the FFS header. ++ * The length of the file data is either ++ * (size - sizeof(struct ffs_file_header)). This calculation means a ++ * zero-length file has a size of 24 bytes, which is ++ * sizeof(struct ffs_file_header). Size is not required to be a ++ * multiple of 8 bytes. Given a file F, the next file header is located ++ * at the next 8-byte aligned firmware volume offset following the last ++ * byte of the file F. ++ */ ++ u8 size[3]; ++ /* ++ * Used to track the state of the file throughout the life of ++ * the file from creation to deletion. ++ */ ++ u8 state; ++ /* ++ * If FFS_ATTRIB_LARGE_FILE is set in attr, then ext_size exists ++ * and size must be set to zero. ++ * If FFS_ATTRIB_LARGE_FILE is not set then ++ * struct ffs_file_header is used. ++ */ ++ u32 ext_size; ++}; ++ ++/* ++ * Pseudo type. It is used as a wild card when retrieving sections. ++ * The section type EFI_SECTION_ALL matches all section types. ++ */ ++#define EFI_SECTION_ALL 0x00 ++ ++/* Encapsulation section Type values */ ++#define EFI_SECTION_COMPRESSION 0x01 ++#define EFI_SECTION_GUID_DEFINED 0x02 ++#define EFI_SECTION_DISPOSABLE 0x03 ++ ++/* Leaf section Type values */ ++#define EFI_SECTION_PE32 0x10 ++#define EFI_SECTION_PIC 0x11 ++#define EFI_SECTION_TE 0x12 ++#define EFI_SECTION_DXE_DEPEX 0x13 ++#define EFI_SECTION_VERSION 0x14 ++#define EFI_SECTION_USER_INTERFACE 0x15 ++#define EFI_SECTION_COMPATIBILITY16 0x16 ++#define EFI_SECTION_FIRMWARE_VOLUME_IMAGE 0x17 ++#define EFI_SECTION_FREEFORM_SUBTYPE_GUID 0x18 ++#define EFI_SECTION_RAW 0x19 ++#define EFI_SECTION_PEI_DEPEX 0x1B ++#define EFI_SECTION_SMM_DEPEX 0x1C ++ ++/* Common section header */ ++struct __packed raw_section { ++ /* ++ * A 24-bit unsigned integer that contains the total size of ++ * the section in bytes, including the EFI_COMMON_SECTION_HEADER. ++ */ ++ u8 size[3]; ++ u8 type; ++}; ++ ++struct __packed raw_section2 { ++ /* ++ * A 24-bit unsigned integer that contains the total size of ++ * the section in bytes, including the EFI_COMMON_SECTION_HEADER. ++ */ ++ u8 size[3]; ++ u8 type; ++ /* ++ * If size is 0xFFFFFF, then ext_size contains the size of ++ * the section. If size is not equal to 0xFFFFFF, then this ++ * field does not exist. ++ */ ++ u32 ext_size; ++}; ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,137 @@ ++/* ++ * Copyright (C) 2013, Intel Corporation ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: Intel ++ */ ++ ++#ifndef __FSP_FV___ ++#define __FSP_FV___ ++ ++/* Value of EFI_FV_FILE_ATTRIBUTES */ ++#define EFI_FV_FILE_ATTR_ALIGNMENT 0x0000001F ++#define EFI_FV_FILE_ATTR_FIXED 0x00000100 ++#define EFI_FV_FILE_ATTR_MEMORY_MAPPED 0x00000200 ++ ++/* Attributes bit definitions */ ++#define EFI_FVB2_READ_DISABLED_CAP 0x00000001 ++#define EFI_FVB2_READ_ENABLED_CAP 0x00000002 ++#define EFI_FVB2_READ_STATUS 0x00000004 ++#define EFI_FVB2_WRITE_DISABLED_CAP 0x00000008 ++#define EFI_FVB2_WRITE_ENABLED_CAP 0x00000010 ++#define EFI_FVB2_WRITE_STATUS 0x00000020 ++#define EFI_FVB2_LOCK_CAP 0x00000040 ++#define EFI_FVB2_LOCK_STATUS 0x00000080 ++#define EFI_FVB2_STICKY_WRITE 0x00000200 ++#define EFI_FVB2_MEMORY_MAPPED 0x00000400 ++#define EFI_FVB2_ERASE_POLARITY 0x00000800 ++#define EFI_FVB2_READ_LOCK_CAP 0x00001000 ++#define EFI_FVB2_READ_LOCK_STATUS 0x00002000 ++#define EFI_FVB2_WRITE_LOCK_CAP 0x00004000 ++#define EFI_FVB2_WRITE_LOCK_STATUS 0x00008000 ++#define EFI_FVB2_ALIGNMENT 0x001F0000 ++#define EFI_FVB2_ALIGNMENT_1 0x00000000 ++#define EFI_FVB2_ALIGNMENT_2 0x00010000 ++#define EFI_FVB2_ALIGNMENT_4 0x00020000 ++#define EFI_FVB2_ALIGNMENT_8 0x00030000 ++#define EFI_FVB2_ALIGNMENT_16 0x00040000 ++#define EFI_FVB2_ALIGNMENT_32 0x00050000 ++#define EFI_FVB2_ALIGNMENT_64 0x00060000 ++#define EFI_FVB2_ALIGNMENT_128 0x00070000 ++#define EFI_FVB2_ALIGNMENT_256 0x00080000 ++#define EFI_FVB2_ALIGNMENT_512 0x00090000 ++#define EFI_FVB2_ALIGNMENT_1K 0x000A0000 ++#define EFI_FVB2_ALIGNMENT_2K 0x000B0000 ++#define EFI_FVB2_ALIGNMENT_4K 0x000C0000 ++#define EFI_FVB2_ALIGNMENT_8K 0x000D0000 ++#define EFI_FVB2_ALIGNMENT_16K 0x000E0000 ++#define EFI_FVB2_ALIGNMENT_32K 0x000F0000 ++#define EFI_FVB2_ALIGNMENT_64K 0x00100000 ++#define EFI_FVB2_ALIGNMENT_128K 0x00110000 ++#define EFI_FVB2_ALIGNMENT_256K 0x00120000 ++#define EFI_FVB2_ALIGNMENT_512K 0x00130000 ++#define EFI_FVB2_ALIGNMENT_1M 0x00140000 ++#define EFI_FVB2_ALIGNMENT_2M 0x00150000 ++#define EFI_FVB2_ALIGNMENT_4M 0x00160000 ++#define EFI_FVB2_ALIGNMENT_8M 0x00170000 ++#define EFI_FVB2_ALIGNMENT_16M 0x00180000 ++#define EFI_FVB2_ALIGNMENT_32M 0x00190000 ++#define EFI_FVB2_ALIGNMENT_64M 0x001A0000 ++#define EFI_FVB2_ALIGNMENT_128M 0x001B0000 ++#define EFI_FVB2_ALIGNMENT_256M 0x001C0000 ++#define EFI_FVB2_ALIGNMENT_512M 0x001D0000 ++#define EFI_FVB2_ALIGNMENT_1G 0x001E0000 ++#define EFI_FVB2_ALIGNMENT_2G 0x001F0000 ++ ++struct fv_blkmap_entry { ++ /* The number of sequential blocks which are of the same size */ ++ u32 num_blocks; ++ /* The size of the blocks */ ++ u32 length; ++}; ++ ++/* Describes the features and layout of the firmware volume */ ++struct fv_header { ++ /* ++ * The first 16 bytes are reserved to allow for the reset vector of ++ * processors whose reset vector is at address 0. ++ */ ++ u8 zero_vec[16]; ++ /* ++ * Declares the file system with which the firmware volume ++ * is formatted. ++ */ ++ struct efi_guid fs_guid; ++ /* ++ * Length in bytes of the complete firmware volume, including ++ * the header. ++ */ ++ u64 fv_len; ++ /* Set to EFI_FVH_SIGNATURE */ ++ u32 sign; ++ /* ++ * Declares capabilities and power-on defaults for the firmware ++ * volume. ++ */ ++ u32 attr; ++ /* Length in bytes of the complete firmware volume header */ ++ u16 hdr_len; ++ /* ++ * A 16-bit checksum of the firmware volume header. ++ * A valid header sums to zero. ++ */ ++ u16 checksum; ++ /* ++ * Offset, relative to the start of the header, of the extended ++ * header (EFI_FIRMWARE_VOLUME_EXT_HEADER) or zero if there is ++ * no extended header. ++ */ ++ u16 ext_hdr_off; ++ /* This field must always be set to zero */ ++ u8 reserved[1]; ++ /* ++ * Set to 2. Future versions of this specification may define new ++ * header fields and will increment the Revision field accordingly. ++ */ ++ u8 rev; ++ /* ++ * An array of run-length encoded FvBlockMapEntry structures. ++ * The array is terminated with an entry of {0,0}. ++ */ ++ struct fv_blkmap_entry block_map[1]; ++}; ++ ++#define EFI_FVH_SIGNATURE SIGNATURE_32('_', 'F', 'V', 'H') ++ ++/* Firmware Volume Header Revision definition */ ++#define EFI_FVH_REVISION 0x02 ++ ++/* Extension header pointed by ExtHeaderOffset of volume header */ ++struct fv_ext_header { ++ /* firmware volume name */ ++ struct efi_guid fv_name; ++ /* Size of the rest of the extension header including this structure */ ++ u32 ext_hdr_size; ++}; ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,340 @@ ++/* ++ * Copyright (C) 2013, Intel Corporation ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: Intel ++ */ ++ ++#ifndef __FSP_HOB_H__ ++#define __FSP_HOB_H__ ++ ++/* Type of HOB Header */ ++#define HOB_TYPE_MEM_ALLOC 0x0002 ++#define HOB_TYPE_RES_DESC 0x0003 ++#define HOB_TYPE_GUID_EXT 0x0004 ++#define HOB_TYPE_UNUSED 0xFFFE ++#define HOB_TYPE_EOH 0xFFFF ++ ++/* ++ * Describes the format and size of the data inside the HOB. ++ * All HOBs must contain this generic HOB header. ++ */ ++struct hob_header { ++ u16 type; /* HOB type */ ++ u16 len; /* HOB length */ ++ u32 reserved; /* always zero */ ++}; ++ ++/* Enumeration of memory types introduced in UEFI */ ++enum efi_mem_type { ++ EFI_RESERVED_MEMORY_TYPE, ++ /* ++ * The code portions of a loaded application. ++ * (Note that UEFI OS loaders are UEFI applications.) ++ */ ++ EFI_LOADER_CODE, ++ /* ++ * The data portions of a loaded application and ++ * the default data allocation type used by an application ++ * to allocate pool memory. ++ */ ++ EFI_LOADER_DATA, ++ /* The code portions of a loaded Boot Services Driver */ ++ EFI_BOOT_SERVICES_CODE, ++ /* ++ * The data portions of a loaded Boot Serves Driver and ++ * the default data allocation type used by a Boot Services ++ * Driver to allocate pool memory. ++ */ ++ EFI_BOOT_SERVICES_DATA, ++ /* The code portions of a loaded Runtime Services Driver */ ++ EFI_RUNTIME_SERVICES_CODE, ++ /* ++ * The data portions of a loaded Runtime Services Driver and ++ * the default data allocation type used by a Runtime Services ++ * Driver to allocate pool memory. ++ */ ++ EFI_RUNTIME_SERVICES_DATA, ++ /* Free (unallocated) memory */ ++ EFI_CONVENTIONAL_MEMORY, ++ /* Memory in which errors have been detected */ ++ EFI_UNUSABLE_MEMORY, ++ /* Memory that holds the ACPI tables */ ++ EFI_ACPI_RECLAIM_MEMORY, ++ /* Address space reserved for use by the firmware */ ++ EFI_ACPI_MEMORY_NVS, ++ /* ++ * Used by system firmware to request that a memory-mapped IO region ++ * be mapped by the OS to a virtual address so it can be accessed by ++ * EFI runtime services. ++ */ ++ EFI_MMAP_IO, ++ /* ++ * System memory-mapped IO region that is used to translate ++ * memory cycles to IO cycles by the processor. ++ */ ++ EFI_MMAP_IO_PORT, ++ /* ++ * Address space reserved by the firmware for code that is ++ * part of the processor. ++ */ ++ EFI_PAL_CODE, ++ EFI_MAX_MEMORY_TYPE ++}; ++ ++/* ++ * Describes all memory ranges used during the HOB producer phase that ++ * exist outside the HOB list. This HOB type describes how memory is used, ++ * not the physical attributes of memory. ++ */ ++struct hob_mem_alloc { ++ struct hob_header hdr; ++ /* ++ * A GUID that defines the memory allocation region's type and purpose, ++ * as well as other fields within the memory allocation HOB. This GUID ++ * is used to define the additional data within the HOB that may be ++ * present for the memory allocation HOB. Type efi_guid is defined in ++ * InstallProtocolInterface() in the UEFI 2.0 specification. ++ */ ++ struct efi_guid name; ++ /* ++ * The base address of memory allocated by this HOB. ++ * Type phys_addr_t is defined in AllocatePages() in the UEFI 2.0 ++ * specification. ++ */ ++ phys_addr_t mem_base; ++ /* The length in bytes of memory allocated by this HOB */ ++ phys_size_t mem_len; ++ /* ++ * Defines the type of memory allocated by this HOB. ++ * The memory type definition follows the EFI_MEMORY_TYPE definition. ++ * Type EFI_MEMORY_TYPE is defined in AllocatePages() in the UEFI 2.0 ++ * specification. ++ */ ++ enum efi_mem_type mem_type; ++ /* padding */ ++ u8 reserved[4]; ++}; ++ ++/* Value of ResourceType in HOB_RES_DESC */ ++#define RES_SYS_MEM 0x00000000 ++#define RES_MMAP_IO 0x00000001 ++#define RES_IO 0x00000002 ++#define RES_FW_DEVICE 0x00000003 ++#define RES_MMAP_IO_PORT 0x00000004 ++#define RES_MEM_RESERVED 0x00000005 ++#define RES_IO_RESERVED 0x00000006 ++#define RES_MAX_MEM_TYPE 0x00000007 ++ ++/* ++ * These types can be ORed together as needed. ++ * ++ * The first three enumerations describe settings ++ * The rest of the settings describe capabilities ++ */ ++#define RES_ATTR_PRESENT 0x00000001 ++#define RES_ATTR_INITIALIZED 0x00000002 ++#define RES_ATTR_TESTED 0x00000004 ++#define RES_ATTR_SINGLE_BIT_ECC 0x00000008 ++#define RES_ATTR_MULTIPLE_BIT_ECC 0x00000010 ++#define RES_ATTR_ECC_RESERVED_1 0x00000020 ++#define RES_ATTR_ECC_RESERVED_2 0x00000040 ++#define RES_ATTR_READ_PROTECTED 0x00000080 ++#define RES_ATTR_WRITE_PROTECTED 0x00000100 ++#define RES_ATTR_EXECUTION_PROTECTED 0x00000200 ++#define RES_ATTR_UNCACHEABLE 0x00000400 ++#define RES_ATTR_WRITE_COMBINEABLE 0x00000800 ++#define RES_ATTR_WRITE_THROUGH_CACHEABLE 0x00001000 ++#define RES_ATTR_WRITE_BACK_CACHEABLE 0x00002000 ++#define RES_ATTR_16_BIT_IO 0x00004000 ++#define RES_ATTR_32_BIT_IO 0x00008000 ++#define RES_ATTR_64_BIT_IO 0x00010000 ++#define RES_ATTR_UNCACHED_EXPORTED 0x00020000 ++ ++/* ++ * Describes the resource properties of all fixed, nonrelocatable resource ++ * ranges found on the processor host bus during the HOB producer phase. ++ */ ++struct hob_res_desc { ++ struct hob_header hdr; ++ /* ++ * A GUID representing the owner of the resource. This GUID is ++ * used by HOB consumer phase components to correlate device ++ * ownership of a resource. ++ */ ++ struct efi_guid owner; ++ u32 type; ++ u32 attr; ++ /* The physical start address of the resource region */ ++ phys_addr_t phys_start; ++ /* The number of bytes of the resource region */ ++ phys_size_t len; ++}; ++ ++/* ++ * Allows writers of executable content in the HOB producer phase to ++ * maintain and manage HOBs with specific GUID. ++ */ ++struct hob_guid { ++ struct hob_header hdr; ++ /* A GUID that defines the contents of this HOB */ ++ struct efi_guid name; ++ /* GUID specific data goes here */ ++}; ++ ++/* Union of all the possible HOB Types */ ++union hob_pointers { ++ struct hob_header *hdr; ++ struct hob_mem_alloc *mem_alloc; ++ struct hob_res_desc *res_desc; ++ struct hob_guid *guid; ++ u8 *raw; ++}; ++ ++/** ++ * get_hob_type() - return the type of a HOB ++ * ++ * This macro returns the type field from the HOB header for the ++ * HOB specified by hob. ++ * ++ * @hob: A pointer to a HOB. ++ * ++ * @return: HOB type. ++ */ ++static inline u16 get_hob_type(union hob_pointers hob) ++{ ++ return hob.hdr->type; ++} ++ ++/** ++ * get_hob_length() - return the length, in bytes, of a HOB ++ * ++ * This macro returns the len field from the HOB header for the ++ * HOB specified by hob. ++ * ++ * @hob: A pointer to a HOB. ++ * ++ * @return: HOB length. ++ */ ++static inline u16 get_hob_length(union hob_pointers hob) ++{ ++ return hob.hdr->len; ++} ++ ++/** ++ * get_next_hob() - return a pointer to the next HOB in the HOB list ++ * ++ * This macro returns a pointer to HOB that follows the HOB specified by hob ++ * in the HOB List. ++ * ++ * @hob: A pointer to a HOB. ++ * ++ * @return: A pointer to the next HOB in the HOB list. ++ */ ++static inline void *get_next_hob(union hob_pointers hob) ++{ ++ return (void *)(*(u8 **)&(hob) + get_hob_length(hob)); ++} ++ ++/** ++ * end_of_hob() - determine if a HOB is the last HOB in the HOB list ++ * ++ * This macro determine if the HOB specified by hob is the last HOB in the ++ * HOB list. If hob is last HOB in the HOB list, then true is returned. ++ * Otherwise, false is returned. ++ * ++ * @hob: A pointer to a HOB. ++ * ++ * @retval true: The HOB specified by hob is the last HOB in the HOB list. ++ * @retval false: The HOB specified by hob is not the last HOB in the HOB list. ++ */ ++static inline bool end_of_hob(union hob_pointers hob) ++{ ++ return get_hob_type(hob) == HOB_TYPE_EOH; ++} ++ ++/** ++ * get_guid_hob_data() - return a pointer to data buffer from a HOB of ++ * type HOB_TYPE_GUID_EXT ++ * ++ * This macro returns a pointer to the data buffer in a HOB specified by hob. ++ * hob is assumed to be a HOB of type HOB_TYPE_GUID_EXT. ++ * ++ * @hob: A pointer to a HOB. ++ * ++ * @return: A pointer to the data buffer in a HOB. ++ */ ++static inline void *get_guid_hob_data(u8 *hob) ++{ ++ return (void *)(hob + sizeof(struct hob_guid)); ++} ++ ++/** ++ * get_guid_hob_data_size() - return the size of the data buffer from a HOB ++ * of type HOB_TYPE_GUID_EXT ++ * ++ * This macro returns the size, in bytes, of the data buffer in a HOB ++ * specified by hob. hob is assumed to be a HOB of type HOB_TYPE_GUID_EXT. ++ * ++ * @hob: A pointer to a HOB. ++ * ++ * @return: The size of the data buffer. ++ */ ++static inline u16 get_guid_hob_data_size(u8 *hob) ++{ ++ union hob_pointers hob_p = *(union hob_pointers *)hob; ++ return get_hob_length(hob_p) - sizeof(struct hob_guid); ++} ++ ++/* FSP specific GUID HOB definitions */ ++#define FSP_GUID_DATA1 0x912740be ++#define FSP_GUID_DATA2 0x2284 ++#define FSP_GUID_DATA3 0x4734 ++#define FSP_GUID_DATA4_0 0xb9 ++#define FSP_GUID_DATA4_1 0x71 ++#define FSP_GUID_DATA4_2 0x84 ++#define FSP_GUID_DATA4_3 0xb0 ++#define FSP_GUID_DATA4_4 0x27 ++#define FSP_GUID_DATA4_5 0x35 ++#define FSP_GUID_DATA4_6 0x3f ++#define FSP_GUID_DATA4_7 0x0c ++ ++#define FSP_HEADER_GUID \ ++ { \ ++ FSP_GUID_DATA1, FSP_GUID_DATA2, FSP_GUID_DATA3, \ ++ { FSP_GUID_DATA4_0, FSP_GUID_DATA4_1, FSP_GUID_DATA4_2, \ ++ FSP_GUID_DATA4_3, FSP_GUID_DATA4_4, FSP_GUID_DATA4_5, \ ++ FSP_GUID_DATA4_6, FSP_GUID_DATA4_7 } \ ++ } ++ ++#define FSP_NON_VOLATILE_STORAGE_HOB_GUID \ ++ { \ ++ 0x721acf02, 0x4d77, 0x4c2a, \ ++ { 0xb3, 0xdc, 0x27, 0xb, 0x7b, 0xa9, 0xe4, 0xb0 } \ ++ } ++ ++#define FSP_BOOTLOADER_TEMP_MEM_HOB_GUID \ ++ { \ ++ 0xbbcff46c, 0xc8d3, 0x4113, \ ++ { 0x89, 0x85, 0xb9, 0xd4, 0xf3, 0xb3, 0xf6, 0x4e } \ ++ } ++ ++#define FSP_HOB_RESOURCE_OWNER_FSP_GUID \ ++ { \ ++ 0x69a79759, 0x1373, 0x4367, \ ++ { 0xa6, 0xc4, 0xc7, 0xf5, 0x9e, 0xfd, 0x98, 0x6e } \ ++ } ++ ++#define FSP_HOB_RESOURCE_OWNER_TSEG_GUID \ ++ { \ ++ 0xd038747c, 0xd00c, 0x4980, \ ++ { 0xb3, 0x19, 0x49, 0x01, 0x99, 0xa4, 0x7d, 0x55 } \ ++ } ++ ++#define FSP_HOB_RESOURCE_OWNER_GRAPHICS_GUID \ ++ { \ ++ 0x9c7c3aa7, 0x5332, 0x4917, \ ++ { 0x82, 0xb9, 0x56, 0xa5, 0xf3, 0xe6, 0x2a, 0x07 } \ ++ } ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,32 @@ ++/* ++ * Copyright (C) 2013, Intel Corporation ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: Intel ++ */ ++ ++#ifndef _FSP_HEADER_H_ ++#define _FSP_HEADER_H_ ++ ++#define FSP_HEADER_OFF 0x94 /* Fixed FSP header offset in the FSP image */ ++ ++struct __packed fsp_header { ++ u32 sign; /* 'FSPH' */ ++ u32 hdr_len; /* header length */ ++ u8 reserved1[3]; ++ u8 hdr_rev; /* header rev */ ++ u32 img_rev; /* image rev */ ++ char img_id[8]; /* signature string */ ++ u32 img_size; /* image size */ ++ u32 img_base; /* image base */ ++ u32 img_attr; /* image attribute */ ++ u32 cfg_region_off; /* configuration region offset */ ++ u32 cfg_region_size; /* configuration region size */ ++ u32 api_num; /* number of API entries */ ++ u32 fsp_tempram_init; /* tempram_init offset */ ++ u32 fsp_init; /* fsp_init offset */ ++ u32 fsp_notify; /* fsp_notify offset */ ++ u32 reserved2; ++}; ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,15 @@ ++/* ++ * Copyright (C) 2013, Intel Corporation ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: Intel ++ */ ++ ++#ifndef __FSP_PLATFORM_H__ ++#define __FSP_PLATFORM_H__ ++ ++struct fspinit_rtbuf { ++ struct common_buf common; /* FSP common runtime data structure */ ++}; ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,207 @@ ++/* ++ * Copyright (C) 2013, Intel Corporation ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: Intel ++ */ ++ ++#ifndef __FSP_SUPPORT_H__ ++#define __FSP_SUPPORT_H__ ++ ++#include "fsp_types.h" ++#include "fsp_fv.h" ++#include "fsp_ffs.h" ++#include "fsp_api.h" ++#include "fsp_hob.h" ++#include "fsp_platform.h" ++#include "fsp_infoheader.h" ++#include "fsp_bootmode.h" ++#include "fsp_vpd.h" ++ ++struct shared_data { ++ struct fsp_header *fsp_hdr; ++ u32 *stack_top; ++ struct upd_region fsp_upd; ++}; ++ ++#define FSP_LOWMEM_BASE 0x100000UL ++#define FSP_HIGHMEM_BASE 0x100000000ULL ++ ++/** ++ * FSP Continuation assembly helper routine ++ * ++ * This routine jumps to the C version of FSP continuation function ++ */ ++void asm_continuation(void); ++ ++/** ++ * FSP initialization complete ++ * ++ * This is the function that indicates FSP initialization is complete and jumps ++ * back to the bootloader with HOB list pointer as the parameter. ++ * ++ * @hob_list: HOB list pointer ++ */ ++void fsp_init_done(void *hob_list); ++ ++/** ++ * FSP Continuation function ++ * ++ * @shared_data: Shared data base before stack migration ++ * @status: Always 0 ++ * @hob_list: HOB list pointer ++ * ++ * @retval: Never returns ++ */ ++void fsp_continue(struct shared_data *shared_data, u32 status, ++ void *hob_list); ++ ++/** ++ * Find FSP header offset in FSP image ++ * ++ * @retval: the offset of FSP header. If signature is invalid, returns 0. ++ */ ++u32 find_fsp_header(void); ++ ++/** ++ * FSP initialization wrapper function. ++ * ++ * @stack_top: bootloader stack top address ++ * @boot_mode: boot mode defined in fsp_bootmode.h ++ * @nvs_buf: Non-volatile memory buffer pointer ++ */ ++void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf); ++ ++/** ++ * FSP notification wrapper function ++ * ++ * @fsp_hdr: Pointer to FSP information header ++ * @phase: FSP initialization phase defined in enum fsp_phase ++ * ++ * @retval: compatible status code with EFI_STATUS defined in PI spec ++ */ ++u32 fsp_notify(struct fsp_header *fsp_hdr, u32 phase); ++ ++/** ++ * This function retrieves the top of usable low memory. ++ * ++ * @hob_list: A HOB list pointer. ++ * ++ * @retval: Usable low memory top. ++ */ ++u32 fsp_get_usable_lowmem_top(const void *hob_list); ++ ++/** ++ * This function retrieves the top of usable high memory. ++ * ++ * @hob_list: A HOB list pointer. ++ * ++ * @retval: Usable high memory top. ++ */ ++u64 fsp_get_usable_highmem_top(const void *hob_list); ++ ++/** ++ * This function retrieves a special reserved memory region. ++ * ++ * @hob_list: A HOB list pointer. ++ * @len: A pointer to the GUID HOB data buffer length. ++ * If the GUID HOB is located, the length will be updated. ++ * @guid: A pointer to the owner guild. ++ * ++ * @retval: Reserved region start address. ++ * 0 if this region does not exist. ++ */ ++u64 fsp_get_reserved_mem_from_guid(const void *hob_list, ++ u64 *len, struct efi_guid *guid); ++ ++/** ++ * This function retrieves the FSP reserved normal memory. ++ * ++ * @hob_list: A HOB list pointer. ++ * @len: A pointer to the FSP reserved memory length buffer. ++ * If the GUID HOB is located, the length will be updated. ++ * @retval: FSP reserved memory base ++ * 0 if this region does not exist. ++ */ ++u32 fsp_get_fsp_reserved_mem(const void *hob_list, u32 *len); ++ ++/** ++ * This function retrieves the TSEG reserved normal memory. ++ * ++ * @hob_list: A HOB list pointer. ++ * @len: A pointer to the TSEG reserved memory length buffer. ++ * If the GUID HOB is located, the length will be updated. ++ * ++ * @retval NULL: Failed to find the TSEG reserved memory. ++ * @retval others: TSEG reserved memory base. ++ */ ++u32 fsp_get_tseg_reserved_mem(const void *hob_list, u32 *len); ++ ++/** ++ * Returns the next instance of a HOB type from the starting HOB. ++ * ++ * @type: HOB type to search ++ * @hob_list: A pointer to the HOB list ++ * ++ * @retval: A HOB object with matching type; Otherwise NULL. ++ */ ++void *fsp_get_next_hob(u16 type, const void *hob_list); ++ ++/** ++ * Returns the next instance of the matched GUID HOB from the starting HOB. ++ * ++ * @guid: GUID to search ++ * @hob_list: A pointer to the HOB list ++ * ++ * @retval: A HOB object with matching GUID; Otherwise NULL. ++ */ ++void *fsp_get_next_guid_hob(const struct efi_guid *guid, const void *hob_list); ++ ++/** ++ * This function retrieves a GUID HOB data buffer and size. ++ * ++ * @hob_list: A HOB list pointer. ++ * @len: A pointer to the GUID HOB data buffer length. ++ * If the GUID HOB is located, the length will be updated. ++ * @guid A pointer to HOB GUID. ++ * ++ * @retval NULL: Failed to find the GUID HOB. ++ * @retval others: GUID HOB data buffer pointer. ++ */ ++void *fsp_get_guid_hob_data(const void *hob_list, u32 *len, ++ struct efi_guid *guid); ++ ++/** ++ * This function retrieves FSP Non-volatile Storage HOB buffer and size. ++ * ++ * @hob_list: A HOB list pointer. ++ * @len: A pointer to the NVS data buffer length. ++ * If the HOB is located, the length will be updated. ++ * ++ * @retval NULL: Failed to find the NVS HOB. ++ * @retval others: FSP NVS data buffer pointer. ++ */ ++void *fsp_get_nvs_data(const void *hob_list, u32 *len); ++ ++/** ++ * This function retrieves Bootloader temporary stack buffer and size. ++ * ++ * @hob_list: A HOB list pointer. ++ * @len: A pointer to the bootloader temporary stack length. ++ * If the HOB is located, the length will be updated. ++ * ++ * @retval NULL: Failed to find the bootloader temporary stack HOB. ++ * @retval others: Bootloader temporary stackbuffer pointer. ++ */ ++void *fsp_get_bootloader_tmp_mem(const void *hob_list, u32 *len); ++ ++/** ++ * This function overrides the default configurations in the UPD data region. ++ * ++ * @fsp_upd: A pointer to the upd_region data strcture ++ * ++ * @return: None ++ */ ++void update_fsp_upd(struct upd_region *fsp_upd); ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,82 @@ ++/* ++ * Copyright (C) 2013, Intel Corporation ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: Intel ++ */ ++ ++#ifndef __FSP_TYPES_H__ ++#define __FSP_TYPES_H__ ++ ++/* 128 bit buffer containing a unique identifier value */ ++struct efi_guid { ++ u32 data1; ++ u16 data2; ++ u16 data3; ++ u8 data4[8]; ++}; ++ ++/** ++ * Returns a 16-bit signature built from 2 ASCII characters. ++ * ++ * This macro returns a 16-bit value built from the two ASCII characters ++ * specified by A and B. ++ * ++ * @A: The first ASCII character. ++ * @B: The second ASCII character. ++ * ++ * @return: A 16-bit value built from the two ASCII characters specified by ++ * A and B. ++ */ ++#define SIGNATURE_16(A, B) ((A) | (B << 8)) ++ ++/** ++ * Returns a 32-bit signature built from 4 ASCII characters. ++ * ++ * This macro returns a 32-bit value built from the four ASCII characters ++ * specified by A, B, C, and D. ++ * ++ * @A: The first ASCII character. ++ * @B: The second ASCII character. ++ * @C: The third ASCII character. ++ * @D: The fourth ASCII character. ++ * ++ * @return: A 32-bit value built from the two ASCII characters specified by ++ * A, B, C and D. ++ */ ++#define SIGNATURE_32(A, B, C, D) \ ++ (SIGNATURE_16(A, B) | (SIGNATURE_16(C, D) << 16)) ++ ++/** ++ * Returns a 64-bit signature built from 8 ASCII characters. ++ * ++ * This macro returns a 64-bit value built from the eight ASCII characters ++ * specified by A, B, C, D, E, F, G,and H. ++ * ++ * @A: The first ASCII character. ++ * @B: The second ASCII character. ++ * @C: The third ASCII character. ++ * @D: The fourth ASCII character. ++ * @E: The fifth ASCII character. ++ * @F: The sixth ASCII character. ++ * @G: The seventh ASCII character. ++ * @H: The eighth ASCII character. ++ * ++ * @return: A 64-bit value built from the two ASCII characters specified by ++ * A, B, C, D, E, F, G and H. ++ */ ++#define SIGNATURE_64(A, B, C, D, E, F, G, H) \ ++ (SIGNATURE_32(A, B, C, D) | ((u64)(SIGNATURE_32(E, F, G, H)) << 32)) ++ ++/* ++ * Define FSP API return status code. ++ * Compatiable with EFI_STATUS defined in PI Spec. ++ */ ++#define FSP_SUCCESS 0 ++#define FSP_INVALID_PARAM 0x80000002 ++#define FSP_UNSUPPORTED 0x80000003 ++#define FSP_DEVICE_ERROR 0x80000007 ++#define FSP_NOT_FOUND 0x8000000E ++#define FSP_ALREADY_STARTED 0x80000014 ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,56 @@ ++/* ++ * Copyright (C) 2013, Intel Corporation ++ * Copyright (C) 2014, Bin Meng ++ * ++ * This file is automatically generated. Please do NOT modify !!! ++ * ++ * SPDX-License-Identifier: Intel ++ */ ++ ++#ifndef __VPDHEADER_H__ ++#define __VPDHEADER_H__ ++ ++#define UPD_TERMINATOR 0x55AA ++ ++struct __packed upd_region { ++ u64 sign; /* Offset 0x0000 */ ++ u64 reserved; /* Offset 0x0008 */ ++ u8 dummy[240]; /* Offset 0x0010 */ ++ u8 hda_verb_header[12]; /* Offset 0x0100 */ ++ u32 hda_verb_length; /* Offset 0x010C */ ++ u8 hda_verb_data0[16]; /* Offset 0x0110 */ ++ u8 hda_verb_data1[16]; /* Offset 0x0120 */ ++ u8 hda_verb_data2[16]; /* Offset 0x0130 */ ++ u8 hda_verb_data3[16]; /* Offset 0x0140 */ ++ u8 hda_verb_data4[16]; /* Offset 0x0150 */ ++ u8 hda_verb_data5[16]; /* Offset 0x0160 */ ++ u8 hda_verb_data6[16]; /* Offset 0x0170 */ ++ u8 hda_verb_data7[16]; /* Offset 0x0180 */ ++ u8 hda_verb_data8[16]; /* Offset 0x0190 */ ++ u8 hda_verb_data9[16]; /* Offset 0x01A0 */ ++ u8 hda_verb_data10[16]; /* Offset 0x01B0 */ ++ u8 hda_verb_data11[16]; /* Offset 0x01C0 */ ++ u8 hda_verb_data12[16]; /* Offset 0x01D0 */ ++ u8 hda_verb_data13[16]; /* Offset 0x01E0 */ ++ u8 hda_verb_pad[47]; /* Offset 0x01F0 */ ++ u16 terminator; /* Offset 0x021F */ ++}; ++ ++#define VPD_IMAGE_ID 0x445056574F4E4E4D /* 'MNNOWVPD' */ ++#define VPD_IMAGE_REV 0x00000301 ++ ++struct __packed vpd_region { ++ u64 sign; /* Offset 0x0000 */ ++ u32 img_rev; /* Offset 0x0008 */ ++ u32 upd_offset; /* Offset 0x000C */ ++ u8 unused[16]; /* Offset 0x0010 */ ++ u32 fsp_res_memlen; /* Offset 0x0020 */ ++ u8 disable_pcie1; /* Offset 0x0024 */ ++ u8 disable_pcie2; /* Offset 0x0025 */ ++ u8 disable_pcie3; /* Offset 0x0026 */ ++ u8 enable_azalia; /* Offset 0x0027 */ ++ u8 legacy_seg_decode; /* Offset 0x0028 */ ++ u8 pcie_port_ioh; /* Offset 0x0029 */ ++}; ++ ++#endif +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/gpio.h u-boot/arch/x86/include/asm/arch-queensbay/gpio.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/gpio.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-queensbay/gpio.h 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,13 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef _X86_ARCH_GPIO_H_ ++#define _X86_ARCH_GPIO_H_ ++ ++/* Where in config space is the register that points to the GPIO registers? */ ++#define PCI_CFG_GPIOBASE 0x44 ++ ++#endif /* _X86_ARCH_GPIO_H_ */ +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/tnc.h u-boot/arch/x86/include/asm/arch-queensbay/tnc.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/tnc.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/include/asm/arch-queensbay/tnc.h 2015-01-01 17:34:32.253503252 +0100 +@@ -0,0 +1,15 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef _X86_ARCH_TNC_H_ ++#define _X86_ARCH_TNC_H_ ++ ++#include ++ ++/* PCI Configuration Space (D31:F0): LPC */ ++#define PCH_LPC_DEV PCI_BDF(0, 0x1f, 0) ++ ++#endif /* _X86_ARCH_TNC_H_ */ +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/config.h u-boot/arch/x86/include/asm/config.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/config.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/include/asm/config.h 2015-01-01 17:34:32.257503186 +0100 +@@ -10,6 +10,5 @@ + #define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_LMB + #define CONFIG_SYS_BOOT_RAMDISK_HIGH +-#define asmlinkage __attribute__((regparm(0))) + + #endif +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/global_data.h u-boot/arch/x86/include/asm/global_data.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/global_data.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/include/asm/global_data.h 2015-01-01 17:34:32.257503186 +0100 +@@ -47,6 +47,9 @@ + enum pei_boot_mode_t pei_boot_mode; + const struct pch_gpio_map *gpio_map; /* board GPIO map */ + struct memory_info meminfo; /* Memory information */ ++#ifdef CONFIG_HAVE_FSP ++ void *hob_list; /* FSP HOB list */ ++#endif + }; + + #endif +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/gpio.h u-boot/arch/x86/include/asm/gpio.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/gpio.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/include/asm/gpio.h 2015-01-01 17:34:32.257503186 +0100 +@@ -11,7 +11,7 @@ + #include + + struct ich6_bank_platdata { +- uint32_t base_addr; ++ uint16_t base_addr; + const char *bank_name; + }; + +@@ -147,6 +147,7 @@ + } set3; + }; + ++void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio); + void ich_gpio_set_gpio_map(const struct pch_gpio_map *map); + + #endif /* _X86_GPIO_H_ */ +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/ibmpc.h u-boot/arch/x86/include/asm/ibmpc.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/ibmpc.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/include/asm/ibmpc.h 2015-01-01 17:34:32.257503186 +0100 +@@ -18,4 +18,7 @@ + #define SYSCTLA 0x92 + #define SLAVE_PIC 0xa0 + ++#define UART0_BASE 0x3f8 ++#define UART1_BASE 0x2f8 ++ + #endif +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/linkage.h u-boot/arch/x86/include/asm/linkage.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/linkage.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/include/asm/linkage.h 2015-01-01 17:34:32.257503186 +0100 +@@ -0,0 +1,6 @@ ++#ifndef _ASM_X86_LINKAGE_H ++#define _ASM_X86_LINKAGE_H ++ ++#define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0))) ++ ++#endif /* _ASM_X86_LINKAGE_H */ +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/pnp_def.h u-boot/arch/x86/include/asm/pnp_def.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/pnp_def.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/include/asm/pnp_def.h 2015-01-01 17:34:32.257503186 +0100 +@@ -0,0 +1,90 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * Adapted from coreboot src/include/device/pnp_def.h ++ * and arch/x86/include/arch/io.h ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef _ASM_PNP_DEF_H_ ++#define _ASM_PNP_DEF_H_ ++ ++#include ++ ++#define PNP_IDX_EN 0x30 ++#define PNP_IDX_IO0 0x60 ++#define PNP_IDX_IO1 0x62 ++#define PNP_IDX_IO2 0x64 ++#define PNP_IDX_IO3 0x66 ++#define PNP_IDX_IRQ0 0x70 ++#define PNP_IDX_IRQ1 0x72 ++#define PNP_IDX_DRQ0 0x74 ++#define PNP_IDX_DRQ1 0x75 ++#define PNP_IDX_MSC0 0xf0 ++#define PNP_IDX_MSC1 0xf1 ++ ++/* Generic functions for pnp devices */ ++ ++/* ++ * pnp device is a 16-bit integer composed of its i/o port address at high byte ++ * and logic function number at low byte. ++ */ ++#define PNP_DEV(PORT, FUNC) (((PORT) << 8) | (FUNC)) ++ ++static inline void pnp_write_config(uint16_t dev, uint8_t reg, uint8_t value) ++{ ++ uint8_t port = dev >> 8; ++ ++ outb(reg, port); ++ outb(value, port + 1); ++} ++ ++static inline uint8_t pnp_read_config(uint16_t dev, uint8_t reg) ++{ ++ uint8_t port = dev >> 8; ++ ++ outb(reg, port); ++ return inb(port + 1); ++} ++ ++static inline void pnp_set_logical_device(uint16_t dev) ++{ ++ uint8_t device = dev & 0xff; ++ ++ pnp_write_config(dev, 0x07, device); ++} ++ ++static inline void pnp_set_enable(uint16_t dev, int enable) ++{ ++ pnp_write_config(dev, PNP_IDX_EN, enable ? 1 : 0); ++} ++ ++static inline int pnp_read_enable(uint16_t dev) ++{ ++ return !!pnp_read_config(dev, PNP_IDX_EN); ++} ++ ++static inline void pnp_set_iobase(uint16_t dev, uint8_t index, uint16_t iobase) ++{ ++ pnp_write_config(dev, index + 0, (iobase >> 8) & 0xff); ++ pnp_write_config(dev, index + 1, iobase & 0xff); ++} ++ ++static inline uint16_t pnp_read_iobase(uint16_t dev, uint8_t index) ++{ ++ return ((uint16_t)(pnp_read_config(dev, index)) << 8) | ++ pnp_read_config(dev, index + 1); ++} ++ ++static inline void pnp_set_irq(uint16_t dev, uint8_t index, unsigned irq) ++{ ++ pnp_write_config(dev, index, irq); ++} ++ ++static inline void pnp_set_drq(uint16_t dev, uint8_t index, unsigned drq) ++{ ++ pnp_write_config(dev, index, drq & 0xff); ++} ++ ++#endif /* _ASM_PNP_DEF_H_ */ +diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/post.h u-boot/arch/x86/include/asm/post.h +--- u-boot-2015.01-rc3/arch/x86/include/asm/post.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/include/asm/post.h 2015-01-01 17:34:32.257503186 +0100 +@@ -33,6 +33,8 @@ + #define POST_LAPIC 0x30 + + #define POST_RAM_FAILURE 0xea ++#define POST_BIST_FAILURE 0xeb ++#define POST_CAR_FAILURE 0xec + + /* Output a post code using al - value must be 0 to 0xff */ + #ifdef __ASSEMBLY__ +diff -ruN u-boot-2015.01-rc3/arch/x86/Kconfig u-boot/arch/x86/Kconfig +--- u-boot-2015.01-rc3/arch/x86/Kconfig 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/Kconfig 2015-01-01 17:34:32.249503317 +0100 +@@ -32,6 +32,15 @@ + and it provides a 2560x1700 high resolution touch-enabled LCD + display. + ++config TARGET_CROWNBAY ++ bool "Support Intel Crown Bay CRB" ++ help ++ This is the Intel Crown Bay Customer Reference Board. It contains ++ the Intel Atom Processor E6xx populated on the COM Express module ++ with 1GB DDR2 soldered down memory and a carrier board with the ++ Intel Platform Controller Hub EG20T, other system components and ++ peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS. ++ + endchoice + + config RAMBASE +@@ -61,9 +70,85 @@ + config SMM_TSEG_SIZE + hex + ++config BOARD_ROMSIZE_KB_512 ++ bool ++config BOARD_ROMSIZE_KB_1024 ++ bool ++config BOARD_ROMSIZE_KB_2048 ++ bool ++config BOARD_ROMSIZE_KB_4096 ++ bool ++config BOARD_ROMSIZE_KB_8192 ++ bool ++config BOARD_ROMSIZE_KB_16384 ++ bool ++ ++choice ++ prompt "ROM chip size" ++ default UBOOT_ROMSIZE_KB_512 if BOARD_ROMSIZE_KB_512 ++ default UBOOT_ROMSIZE_KB_1024 if BOARD_ROMSIZE_KB_1024 ++ default UBOOT_ROMSIZE_KB_2048 if BOARD_ROMSIZE_KB_2048 ++ default UBOOT_ROMSIZE_KB_4096 if BOARD_ROMSIZE_KB_4096 ++ default UBOOT_ROMSIZE_KB_8192 if BOARD_ROMSIZE_KB_8192 ++ default UBOOT_ROMSIZE_KB_16384 if BOARD_ROMSIZE_KB_16384 ++ help ++ Select the size of the ROM chip you intend to flash U-Boot on. ++ ++ The build system will take care of creating a u-boot.rom file ++ of the matching size. ++ ++config UBOOT_ROMSIZE_KB_512 ++ bool "512 KB" ++ help ++ Choose this option if you have a 512 KB ROM chip. ++ ++config UBOOT_ROMSIZE_KB_1024 ++ bool "1024 KB (1 MB)" ++ help ++ Choose this option if you have a 1024 KB (1 MB) ROM chip. ++ ++config UBOOT_ROMSIZE_KB_2048 ++ bool "2048 KB (2 MB)" ++ help ++ Choose this option if you have a 2048 KB (2 MB) ROM chip. ++ ++config UBOOT_ROMSIZE_KB_4096 ++ bool "4096 KB (4 MB)" ++ help ++ Choose this option if you have a 4096 KB (4 MB) ROM chip. ++ ++config UBOOT_ROMSIZE_KB_8192 ++ bool "8192 KB (8 MB)" ++ help ++ Choose this option if you have a 8192 KB (8 MB) ROM chip. ++ ++config UBOOT_ROMSIZE_KB_16384 ++ bool "16384 KB (16 MB)" ++ help ++ Choose this option if you have a 16384 KB (16 MB) ROM chip. ++ ++endchoice ++ ++# Map the config names to an integer (KB). ++config UBOOT_ROMSIZE_KB ++ int ++ default 512 if UBOOT_ROMSIZE_KB_512 ++ default 1024 if UBOOT_ROMSIZE_KB_1024 ++ default 2048 if UBOOT_ROMSIZE_KB_2048 ++ default 4096 if UBOOT_ROMSIZE_KB_4096 ++ default 8192 if UBOOT_ROMSIZE_KB_8192 ++ default 16384 if UBOOT_ROMSIZE_KB_16384 ++ ++# Map the config names to a hex value (bytes). + config ROM_SIZE + hex +- default 0x800000 ++ default 0x80000 if UBOOT_ROMSIZE_KB_512 ++ default 0x100000 if UBOOT_ROMSIZE_KB_1024 ++ default 0x200000 if UBOOT_ROMSIZE_KB_2048 ++ default 0x400000 if UBOOT_ROMSIZE_KB_4096 ++ default 0x800000 if UBOOT_ROMSIZE_KB_8192 ++ default 0xc00000 if UBOOT_ROMSIZE_KB_12288 ++ default 0x1000000 if UBOOT_ROMSIZE_KB_16384 + + config HAVE_INTEL_ME + bool "Platform requires Intel Management Engine" +@@ -234,8 +319,12 @@ + + source "arch/x86/cpu/ivybridge/Kconfig" + ++source "arch/x86/cpu/queensbay/Kconfig" ++ + source "board/coreboot/coreboot/Kconfig" + + source "board/google/chromebook_link/Kconfig" + ++source "board/intel/crownbay/Kconfig" ++ + endmenu +diff -ruN u-boot-2015.01-rc3/arch/x86/lib/asm-offsets.c u-boot/arch/x86/lib/asm-offsets.c +--- u-boot-2015.01-rc3/arch/x86/lib/asm-offsets.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/lib/asm-offsets.c 2015-01-01 17:34:32.257503186 +0100 +@@ -17,6 +17,9 @@ + + int main(void) + { +- DEFINE(GENERATED_GD_RELOC_OFF, offsetof(gd_t, reloc_off)); ++ DEFINE(GD_BIST, offsetof(gd_t, arch.bist)); ++#ifdef CONFIG_HAVE_FSP ++ DEFINE(GD_HOB_LIST, offsetof(gd_t, arch.hob_list)); ++#endif + return 0; + } +diff -ruN u-boot-2015.01-rc3/arch/x86/lib/bios.c u-boot/arch/x86/lib/bios.c +--- u-boot-2015.01-rc3/arch/x86/lib/bios.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/lib/bios.c 2015-01-01 17:34:32.257503186 +0100 +@@ -9,6 +9,7 @@ + #include + #include + #include ++#include + #include + #include + #include +diff -ruN u-boot-2015.01-rc3/arch/x86/lib/bios.h u-boot/arch/x86/lib/bios.h +--- u-boot-2015.01-rc3/arch/x86/lib/bios.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/lib/bios.h 2015-01-01 17:34:32.257503186 +0100 +@@ -10,6 +10,8 @@ + #ifndef _X86_LIB_BIOS_H + #define _X86_LIB_BIOS_H + ++#include ++ + #define REALMODE_BASE 0x600 + + #ifdef __ASSEMBLY__ +diff -ruN u-boot-2015.01-rc3/arch/x86/lib/cmd_hob.c u-boot/arch/x86/lib/cmd_hob.c +--- u-boot-2015.01-rc3/arch/x86/lib/cmd_hob.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/arch/x86/lib/cmd_hob.c 2015-01-01 17:34:32.257503186 +0100 +@@ -0,0 +1,65 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++static char *hob_type[] = { ++ "reserved", ++ "Hand-off", ++ "Memory Allocation", ++ "Resource Descriptor", ++ "GUID Extension", ++ "Firmware Volume", ++ "CPU", ++ "Memory Pool", ++ "reserved", ++ "Firmware Volume 2", ++ "Load PEIM Unused", ++ "UEFI Capsule", ++}; ++ ++int do_hob(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ++{ ++ union hob_pointers hob; ++ u16 type; ++ char *desc; ++ int i = 0; ++ ++ hob.raw = (u8 *)gd->arch.hob_list; ++ ++ printf("HOB list address: 0x%08x\n\n", (unsigned int)hob.raw); ++ ++ printf("No. | Address | Type | Length in Bytes\n"); ++ printf("----|----------|---------------------|----------------\n"); ++ while (!end_of_hob(hob)) { ++ printf("%-3d | %08x | ", i, (unsigned int)hob.raw); ++ type = get_hob_type(hob); ++ if (type == HOB_TYPE_UNUSED) ++ desc = "*Unused*"; ++ else if (type == HOB_TYPE_EOH) ++ desc = "*END OF HOB*"; ++ else if (type >= 0 && type <= ARRAY_SIZE(hob_type)) ++ desc = hob_type[type]; ++ else ++ desc = "*Invalid Type*"; ++ printf("%-19s | %-15d\n", desc, get_hob_length(hob)); ++ hob.raw = get_next_hob(hob); ++ i++; ++ } ++ ++ return 0; ++} ++ ++U_BOOT_CMD( ++ hob, 1, 1, do_hob, ++ "print Firmware Support Package (FSP) Hand-Off Block information", ++ "" ++); +diff -ruN u-boot-2015.01-rc3/arch/x86/lib/Makefile u-boot/arch/x86/lib/Makefile +--- u-boot-2015.01-rc3/arch/x86/lib/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/arch/x86/lib/Makefile 2015-01-01 17:34:32.257503186 +0100 +@@ -10,6 +10,7 @@ + obj-y += bios_interrupts.o + obj-$(CONFIG_CMD_BOOTM) += bootm.o + obj-y += cmd_boot.o ++obj-$(CONFIG_HAVE_FSP) += cmd_hob.o + obj-y += gcc.o + obj-y += init_helpers.o + obj-y += interrupts.o +diff -ruN u-boot-2015.01-rc3/board/altera/socfpga/MAINTAINERS u-boot/board/altera/socfpga/MAINTAINERS +--- u-boot-2015.01-rc3/board/altera/socfpga/MAINTAINERS 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/altera/socfpga/MAINTAINERS 2015-01-01 17:34:32.269502990 +0100 +@@ -5,3 +5,8 @@ + F: board/altera/socfpga/ + F: include/configs/socfpga_cyclone5.h + F: configs/socfpga_cyclone5_defconfig ++ ++SOCRATES BOARD ++M: Stefan Roese ++S: Maintained ++F: configs/socfpga_socrates_defconfig +diff -ruN u-boot-2015.01-rc3/board/altera/socfpga/socfpga_cyclone5.c u-boot/board/altera/socfpga/socfpga_cyclone5.c +--- u-boot-2015.01-rc3/board/altera/socfpga/socfpga_cyclone5.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/altera/socfpga/socfpga_cyclone5.c 2015-01-01 17:34:32.273502924 +0100 +@@ -12,7 +12,9 @@ + #include + #include + ++#include + #include ++#include + + DECLARE_GLOBAL_DATA_PTR; + +@@ -44,6 +46,42 @@ + return 0; + } + ++/* ++ * PHY configuration ++ */ ++#ifdef CONFIG_PHY_MICREL_KSZ9021 ++int board_phy_config(struct phy_device *phydev) ++{ ++ int ret; ++ /* ++ * These skew settings for the KSZ9021 ethernet phy is required for ethernet ++ * to work reliably on most flavors of cyclone5 boards. ++ */ ++ ret = ksz9021_phy_extended_write(phydev, ++ MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, ++ 0x0); ++ if (ret) ++ return ret; ++ ++ ret = ksz9021_phy_extended_write(phydev, ++ MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, ++ 0x0); ++ if (ret) ++ return ret; ++ ++ ret = ksz9021_phy_extended_write(phydev, ++ MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, ++ 0xf0f0); ++ if (ret) ++ return ret; ++ ++ if (phydev->drv->config) ++ return phydev->drv->config(phydev); ++ ++ return 0; ++} ++#endif ++ + #ifdef CONFIG_USB_GADGET + struct s3c_plat_otg_data socfpga_otg_data = { + .regs_otg = CONFIG_USB_DWC2_REG_ADDR, +diff -ruN u-boot-2015.01-rc3/board/aristainetos/aristainetos.c u-boot/board/aristainetos/aristainetos.c +--- u-boot-2015.01-rc3/board/aristainetos/aristainetos.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/aristainetos/aristainetos.c 2015-01-01 17:34:32.281502792 +0100 +@@ -301,7 +301,7 @@ + /* clear gpr1[14], gpr1[18:17] to select anatop clock */ + clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0); + +- ret = enable_fec_anatop_clock(ENET_50MHz); ++ ret = enable_fec_anatop_clock(ENET_50MHZ); + if (ret) + return ret; + +diff -ruN u-boot-2015.01-rc3/board/armltd/vexpress64/MAINTAINERS u-boot/board/armltd/vexpress64/MAINTAINERS +--- u-boot-2015.01-rc3/board/armltd/vexpress64/MAINTAINERS 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/armltd/vexpress64/MAINTAINERS 2015-01-01 17:34:32.281502792 +0100 +@@ -6,6 +6,6 @@ + F: configs/vexpress_aemv8a_defconfig + + VEXPRESS_AEMV8A_SEMI BOARD +-M: Steve Rae ++M: Linus Walleij + S: Maintained + F: configs/vexpress_aemv8a_semi_defconfig +diff -ruN u-boot-2015.01-rc3/board/avionic-design/common/tamonten-ng.c u-boot/board/avionic-design/common/tamonten-ng.c +--- u-boot-2015.01-rc3/board/avionic-design/common/tamonten-ng.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/avionic-design/common/tamonten-ng.c 2015-01-01 17:34:32.285502727 +0100 +@@ -6,6 +6,7 @@ + */ + + #include ++#include + #include + #include + #include +@@ -51,8 +52,15 @@ + + void pmu_write(uchar reg, uchar data) + { +- i2c_set_bus_num(4); /* PMU is on bus 4 */ +- i2c_write(PMU_I2C_ADDRESS, reg, 1, &data, 1); ++ struct udevice *dev; ++ int ret; ++ ++ ret = i2c_get_chip_for_busnum(4, PMU_I2C_ADDRESS, &dev); ++ if (ret) { ++ debug("%s: Cannot find PMIC I2C chip\n", __func__); ++ return; ++ } ++ i2c_write(dev, reg, &data, 1); + } + + /* +diff -ruN u-boot-2015.01-rc3/board/coreboot/coreboot/coreboot.c u-boot/board/coreboot/coreboot/coreboot.c +--- u-boot-2015.01-rc3/board/coreboot/coreboot/coreboot.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/coreboot/coreboot/coreboot.c 2015-01-01 17:34:32.305502399 +0100 +@@ -6,6 +6,7 @@ + + #include + #include ++#include + + int arch_early_init_r(void) + { +@@ -14,3 +15,8 @@ + + return 0; + } ++ ++void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio) ++{ ++ return; ++} +diff -ruN u-boot-2015.01-rc3/board/freescale/common/arm_sleep.c u-boot/board/freescale/common/arm_sleep.c +--- u-boot-2015.01-rc3/board/freescale/common/arm_sleep.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/freescale/common/arm_sleep.c 2015-01-01 17:34:32.357501547 +0100 +@@ -0,0 +1,95 @@ ++/* ++ * Copyright 2014 Freescale Semiconductor, Inc. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#if !defined(CONFIG_ARMV7_NONSEC) || !defined(CONFIG_ARMV7_VIRT) ++#error " Deep sleep needs non-secure mode support. " ++#else ++#include ++#endif ++#include ++#include ++ ++#if defined(CONFIG_LS102XA) ++#include ++#endif ++ ++#include "sleep.h" ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++void __weak board_mem_sleep_setup(void) ++{ ++} ++ ++void __weak board_sleep_prepare(void) ++{ ++} ++ ++bool is_warm_boot(void) ++{ ++ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; ++ ++ if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR) ++ return 1; ++ ++ return 0; ++} ++ ++void fsl_dp_disable_console(void) ++{ ++ gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE; ++} ++ ++/* ++ * When wakeup from deep sleep, the first 128 bytes space ++ * will be used to do DDR training which corrupts the data ++ * in there. This function will restore them. ++ */ ++static void dp_ddr_restore(void) ++{ ++ u64 *src, *dst; ++ int i; ++ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR; ++ ++ /* get the address of ddr date from SPARECR3 */ ++ src = (u64 *)in_le32(&scfg->sparecr[2]); ++ dst = (u64 *)CONFIG_SYS_SDRAM_BASE; ++ ++ for (i = 0; i < DDR_BUFF_LEN / 8; i++) ++ *dst++ = *src++; ++ ++ flush_dcache_all(); ++} ++ ++static void dp_resume_prepare(void) ++{ ++ dp_ddr_restore(); ++ board_sleep_prepare(); ++ armv7_init_nonsec(); ++ cleanup_before_linux(); ++} ++ ++int fsl_dp_resume(void) ++{ ++ u32 start_addr; ++ void (*kernel_resume)(void); ++ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR; ++ ++ if (!is_warm_boot()) ++ return 0; ++ ++ dp_resume_prepare(); ++ ++ /* Get the entry address and jump to kernel */ ++ start_addr = in_le32(&scfg->sparecr[1]); ++ debug("Entry address is 0x%08x\n", start_addr); ++ kernel_resume = (void (*)(void))start_addr; ++ secure_ram_addr(_do_nonsec_entry)(kernel_resume, 0, 0, 0); ++ ++ return 0; ++} +diff -ruN u-boot-2015.01-rc3/board/freescale/common/ls102xa_stream_id.c u-boot/board/freescale/common/ls102xa_stream_id.c +--- u-boot-2015.01-rc3/board/freescale/common/ls102xa_stream_id.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/freescale/common/ls102xa_stream_id.c 2015-01-01 17:34:32.357501547 +0100 +@@ -0,0 +1,18 @@ ++/* ++ * Copyright 2014 Freescale Semiconductor ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++ ++void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num) ++{ ++ uint32_t *scfg = (uint32_t *)CONFIG_SYS_FSL_SCFG_ADDR; ++ int i; ++ ++ for (i = 0; i < num; i++) ++ out_be32(scfg + id[i].offset, id[i].stream_id); ++} +diff -ruN u-boot-2015.01-rc3/board/freescale/common/Makefile u-boot/board/freescale/common/Makefile +--- u-boot-2015.01-rc3/board/freescale/common/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/freescale/common/Makefile 2015-01-01 17:34:32.357501547 +0100 +@@ -37,6 +37,12 @@ + + obj-$(CONFIG_FSL_DIU_CH7301) += diu_ch7301.o + ++ifdef CONFIG_ARM ++obj-$(CONFIG_DEEP_SLEEP) += arm_sleep.o ++else ++obj-$(CONFIG_DEEP_SLEEP) += mpc85xx_sleep.o ++endif ++ + obj-$(CONFIG_FSL_DCU_SII9022A) += dcu_sii9022a.o + + obj-$(CONFIG_MPC8541CDS) += cds_pci_ft.o +@@ -56,10 +62,14 @@ + obj-$(CONFIG_ZM7300) += zm7300.o + obj-$(CONFIG_POWER_PFUZE100) += pfuze.o + ++obj-$(CONFIG_LS102XA_STREAM_ID) += ls102xa_stream_id.o ++ + # deal with common files for P-series corenet based devices + obj-$(CONFIG_P2041RDB) += p_corenet/ + obj-$(CONFIG_P3041DS) += p_corenet/ + obj-$(CONFIG_P4080DS) += p_corenet/ + obj-$(CONFIG_P5020DS) += p_corenet/ + obj-$(CONFIG_P5040DS) += p_corenet/ ++ ++obj-$(CONFIG_LS102XA_NS_ACCESS) += ns_access.o + endif +diff -ruN u-boot-2015.01-rc3/board/freescale/common/mpc85xx_sleep.c u-boot/board/freescale/common/mpc85xx_sleep.c +--- u-boot-2015.01-rc3/board/freescale/common/mpc85xx_sleep.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/freescale/common/mpc85xx_sleep.c 2015-01-01 17:34:32.357501547 +0100 +@@ -0,0 +1,88 @@ ++/* ++ * Copyright 2014 Freescale Semiconductor, Inc. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include "sleep.h" ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++void __weak board_mem_sleep_setup(void) ++{ ++} ++ ++void __weak board_sleep_prepare(void) ++{ ++} ++ ++bool is_warm_boot(void) ++{ ++ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; ++ ++ if (in_be32(&gur->scrtsr[0]) & DCFG_CCSR_CRSTSR_WDRFR) ++ return 1; ++ ++ return 0; ++} ++ ++void fsl_dp_disable_console(void) ++{ ++ gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE; ++} ++ ++/* ++ * When wakeup from deep sleep, the first 128 bytes space ++ * will be used to do DDR training which corrupts the data ++ * in there. This function will restore them. ++ */ ++static void dp_ddr_restore(void) ++{ ++ volatile u64 *src, *dst; ++ int i; ++ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG; ++ ++ /* get the address of ddr date from SPARECR3 */ ++ src = (u64 *)in_be32(&scfg->sparecr[2]); ++ dst = (u64 *)CONFIG_SYS_SDRAM_BASE; ++ ++ for (i = 0; i < DDR_BUFF_LEN / 8; i++) ++ *dst++ = *src++; ++ ++ flush_dcache(); ++} ++ ++static void dp_resume_prepare(void) ++{ ++ dp_ddr_restore(); ++ ++ board_sleep_prepare(); ++ ++ l2cache_init(); ++#if defined(CONFIG_RAMBOOT_PBL) ++ disable_cpc_sram(); ++#endif ++ enable_cpc(); ++} ++ ++int fsl_dp_resume(void) ++{ ++ u32 start_addr; ++ void (*kernel_resume)(void); ++ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG; ++ ++ if (!is_warm_boot()) ++ return 0; ++ ++ dp_resume_prepare(); ++ ++ /* Get the entry address and jump to kernel */ ++ start_addr = in_be32(&scfg->sparecr[1]); ++ debug("Entry address is 0x%08x\n", start_addr); ++ kernel_resume = (void (*)(void))start_addr; ++ kernel_resume(); ++ ++ return 0; ++} +diff -ruN u-boot-2015.01-rc3/board/freescale/common/ns_access.c u-boot/board/freescale/common/ns_access.c +--- u-boot-2015.01-rc3/board/freescale/common/ns_access.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/freescale/common/ns_access.c 2015-01-01 17:34:32.357501547 +0100 +@@ -0,0 +1,30 @@ ++/* ++ * Copyright 2014 Freescale Semiconductor ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++ ++void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num) ++{ ++ u32 *base = (u32 *)CONFIG_SYS_FSL_CSU_ADDR; ++ u32 *reg; ++ uint32_t val; ++ int i; ++ ++ for (i = 0; i < num; i++) { ++ reg = base + ns_dev[i].ind / 2; ++ val = in_be32(reg); ++ if (ns_dev[i].ind % 2 == 0) { ++ val &= 0x0000ffff; ++ val |= ns_dev[i].val << 16; ++ } else { ++ val &= 0xffff0000; ++ val |= ns_dev[i].val; ++ } ++ out_be32(reg, val); ++ } ++} +diff -ruN u-boot-2015.01-rc3/board/freescale/common/qixis.h u-boot/board/freescale/common/qixis.h +--- u-boot-2015.01-rc3/board/freescale/common/qixis.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/freescale/common/qixis.h 2015-01-01 17:34:32.357501547 +0100 +@@ -100,8 +100,15 @@ + void qixis_write_i2c(unsigned int reg, u8 value); + #endif + ++#if defined(CONFIG_QIXIS_I2C_ACCESS) && defined(CONFIG_SYS_I2C_FPGA_ADDR) ++#define QIXIS_READ(reg) qixis_read_i2c(offsetof(struct qixis, reg)) ++#define QIXIS_WRITE(reg, value) \ ++ qixis_write_i2c(offsetof(struct qixis, reg), value) ++#else + #define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg)) + #define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value) ++#endif ++ + #ifdef CONFIG_SYS_I2C_FPGA_ADDR + #define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg)) + #define QIXIS_WRITE_I2C(reg, value) \ +diff -ruN u-boot-2015.01-rc3/board/freescale/common/sleep.h u-boot/board/freescale/common/sleep.h +--- u-boot-2015.01-rc3/board/freescale/common/sleep.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/freescale/common/sleep.h 2015-01-01 17:34:32.357501547 +0100 +@@ -0,0 +1,21 @@ ++/* ++ * Copyright 2014 Freescale Semiconductor, Inc. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __SLEEP_H ++#define __SLEEP_H ++ ++#define DCFG_CCSR_CRSTSR_WDRFR (1 << 3) ++#define DDR_BUFF_LEN 128 ++ ++/* determine if it is a wakeup from deep sleep */ ++bool is_warm_boot(void); ++ ++/* disable console output */ ++void fsl_dp_disable_console(void); ++ ++/* clean up everything and jump to kernel */ ++int fsl_dp_resume(void); ++#endif +diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ddr.c u-boot/board/freescale/ls1021aqds/ddr.c +--- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ddr.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/freescale/ls1021aqds/ddr.c 2015-01-01 17:34:32.361501481 +0100 +@@ -153,9 +153,12 @@ + { + phys_size_t dram_size; + ++#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL) + puts("Initializing DDR....using SPD\n"); + dram_size = fsl_ddr_sdram(); +- ++#else ++ dram_size = fsl_ddr_sdram_size(); ++#endif + return dram_size; + } + +diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls1021aqds.c u-boot/board/freescale/ls1021aqds/ls1021aqds.c +--- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls1021aqds.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/freescale/ls1021aqds/ls1021aqds.c 2015-01-01 17:34:32.361501481 +0100 +@@ -8,12 +8,17 @@ + #include + #include + #include ++#include + #include + #include ++#include ++#include ++#include + #include + #include + #include + #include ++#include + + #include "../common/qixis.h" + #include "ls1021aqds_qixis.h" +@@ -21,9 +26,22 @@ + #include "../../../drivers/qe/qe.h" + #endif + ++#define PIN_MUX_SEL_CAN 0x03 ++#define PIN_MUX_SEL_IIC2 0xa0 ++#define PIN_MUX_SEL_RGMII 0x00 ++#define PIN_MUX_SEL_SAI 0x0c ++#define PIN_MUX_SEL_SDHC 0x00 ++ ++#define SET_SDHC_MUX_SEL(reg, value) ((reg & 0x0f) | value) ++#define SET_EC_MUX_SEL(reg, value) ((reg & 0xf0) | value) + DECLARE_GLOBAL_DATA_PTR; + + enum { ++ MUX_TYPE_CAN, ++ MUX_TYPE_IIC2, ++ MUX_TYPE_RGMII, ++ MUX_TYPE_SAI, ++ MUX_TYPE_SDHC, + MUX_TYPE_SD_PCI4, + MUX_TYPE_SD_PC_SA_SG_SG, + MUX_TYPE_SD_PC_SA_PC_SG, +@@ -32,11 +50,20 @@ + + int checkboard(void) + { ++#ifndef CONFIG_QSPI_BOOT + char buf[64]; ++#endif ++#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT) + u8 sw; ++#endif + + puts("Board: LS1021AQDS\n"); + ++#ifdef CONFIG_SD_BOOT ++ puts("SD\n"); ++#elif CONFIG_QSPI_BOOT ++ puts("QSPI\n"); ++#else + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; + +@@ -50,13 +77,16 @@ + printf("IFCCard\n"); + else + printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); ++#endif + ++#ifndef CONFIG_QSPI_BOOT + printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n", + QIXIS_READ(id), QIXIS_READ(arch)); + + printf("FPGA: v%d (%s), build %d\n", + (int)QIXIS_READ(scver), qixis_read_tag(buf), + (int)qixis_read_minor()); ++#endif + + return 0; + } +@@ -101,8 +131,27 @@ + return 66666666; + } + ++int select_i2c_ch_pca9547(u8 ch) ++{ ++ int ret; ++ ++ ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); ++ if (ret) { ++ puts("PCA: failed to select proper channel\n"); ++ return ret; ++ } ++ ++ return 0; ++} ++ + int dram_init(void) + { ++ /* ++ * When resuming from deep sleep, the I2C channel may not be ++ * in the default channel. So, switch to the default channel ++ * before accessing DDR SPD. ++ */ ++ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + gd->ram_size = initdram(0); + + return 0; +@@ -121,19 +170,6 @@ + } + #endif + +-int select_i2c_ch_pca9547(u8 ch) +-{ +- int ret; +- +- ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); +- if (ret) { +- puts("PCA: failed to select proper channel\n"); +- return ret; +- } +- +- return 0; +-} +- + int board_early_init_f(void) + { + struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; +@@ -148,6 +184,10 @@ + init_early_memctl_regs(); + #endif + ++#ifdef CONFIG_FSL_QSPI ++ out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); ++#endif ++ + /* Workaround for the issue that DDR could not respond to + * barrier transaction which is generated by executing DSB/ISB + * instruction. Set CCI-400 control override register to +@@ -158,13 +198,75 @@ + return 0; + } + ++#ifdef CONFIG_SPL_BUILD ++void board_init_f(ulong dummy) ++{ ++ struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; ++ ++#ifdef CONFIG_NAND_BOOT ++ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; ++ u32 porsr1, pinctl; ++ ++ /* ++ * There is LS1 SoC issue where NOR, FPGA are inaccessible during ++ * NAND boot because IFC signals > IFC_AD7 are not enabled. ++ * This workaround changes RCW source to make all signals enabled. ++ */ ++ porsr1 = in_be32(&gur->porsr1); ++ pinctl = ((porsr1 & ~(DCFG_CCSR_PORSR1_RCW_MASK)) | ++ DCFG_CCSR_PORSR1_RCW_SRC_I2C); ++ out_be32((unsigned int *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1), ++ pinctl); ++#endif ++ ++ /* Set global data pointer */ ++ gd = &gdata; ++ ++ /* Clear the BSS */ ++ memset(__bss_start, 0, __bss_end - __bss_start); ++ ++#ifdef CONFIG_FSL_IFC ++ init_early_memctl_regs(); ++#endif ++ ++ get_clocks(); ++ ++ preloader_console_init(); ++ ++#ifdef CONFIG_SPL_I2C_SUPPORT ++ i2c_init_all(); ++#endif ++ out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER); ++ ++ dram_init(); ++ ++ board_init_r(NULL, 0); ++} ++#endif ++ + int config_board_mux(int ctrl_type) + { +- u8 reg12; ++ u8 reg12, reg14; + + reg12 = QIXIS_READ(brdcfg[12]); ++ reg14 = QIXIS_READ(brdcfg[14]); + + switch (ctrl_type) { ++ case MUX_TYPE_CAN: ++ reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_CAN); ++ break; ++ case MUX_TYPE_IIC2: ++ reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_IIC2); ++ break; ++ case MUX_TYPE_RGMII: ++ reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_RGMII); ++ break; ++ case MUX_TYPE_SAI: ++ reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_SAI); ++ break; ++ case MUX_TYPE_SDHC: ++ reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_SDHC); ++ break; + case MUX_TYPE_SD_PCI4: + reg12 = 0x38; + break; +@@ -183,6 +285,7 @@ + } + + QIXIS_WRITE(brdcfg[12], reg12); ++ QIXIS_WRITE(brdcfg[14], reg14); + + return 0; + } +@@ -216,15 +319,154 @@ + return 0; + } + +-#if defined(CONFIG_MISC_INIT_R) + int misc_init_r(void) + { ++ int conflict_flag; ++ ++ /* some signals can not enable simultaneous*/ ++ conflict_flag = 0; ++ if (hwconfig("sdhc")) ++ conflict_flag++; ++ if (hwconfig("iic2")) ++ conflict_flag++; ++ if (conflict_flag > 1) { ++ printf("WARNING: pin conflict !\n"); ++ return 0; ++ } ++ ++ conflict_flag = 0; ++ if (hwconfig("rgmii")) ++ conflict_flag++; ++ if (hwconfig("can")) ++ conflict_flag++; ++ if (hwconfig("sai")) ++ conflict_flag++; ++ if (conflict_flag > 1) { ++ printf("WARNING: pin conflict !\n"); ++ return 0; ++ } ++ ++ if (hwconfig("can")) ++ config_board_mux(MUX_TYPE_CAN); ++ else if (hwconfig("rgmii")) ++ config_board_mux(MUX_TYPE_RGMII); ++ else if (hwconfig("sai")) ++ config_board_mux(MUX_TYPE_SAI); ++ ++ if (hwconfig("iic2")) ++ config_board_mux(MUX_TYPE_IIC2); ++ else if (hwconfig("sdhc")) ++ config_board_mux(MUX_TYPE_SDHC); ++ + #ifdef CONFIG_FSL_CAAM + return sec_init(); + #endif ++ return 0; + } ++ ++#ifdef CONFIG_LS102XA_NS_ACCESS ++static struct csu_ns_dev ns_dev[] = { ++ { CSU_CSLX_PCIE2_IO, CSU_ALL_RW }, ++ { CSU_CSLX_PCIE1_IO, CSU_ALL_RW }, ++ { CSU_CSLX_MG2TPR_IP, CSU_ALL_RW }, ++ { CSU_CSLX_IFC_MEM, CSU_ALL_RW }, ++ { CSU_CSLX_OCRAM, CSU_ALL_RW }, ++ { CSU_CSLX_GIC, CSU_ALL_RW }, ++ { CSU_CSLX_PCIE1, CSU_ALL_RW }, ++ { CSU_CSLX_OCRAM2, CSU_ALL_RW }, ++ { CSU_CSLX_QSPI_MEM, CSU_ALL_RW }, ++ { CSU_CSLX_PCIE2, CSU_ALL_RW }, ++ { CSU_CSLX_SATA, CSU_ALL_RW }, ++ { CSU_CSLX_USB3, CSU_ALL_RW }, ++ { CSU_CSLX_SERDES, CSU_ALL_RW }, ++ { CSU_CSLX_QDMA, CSU_ALL_RW }, ++ { CSU_CSLX_LPUART2, CSU_ALL_RW }, ++ { CSU_CSLX_LPUART1, CSU_ALL_RW }, ++ { CSU_CSLX_LPUART4, CSU_ALL_RW }, ++ { CSU_CSLX_LPUART3, CSU_ALL_RW }, ++ { CSU_CSLX_LPUART6, CSU_ALL_RW }, ++ { CSU_CSLX_LPUART5, CSU_ALL_RW }, ++ { CSU_CSLX_DSPI2, CSU_ALL_RW }, ++ { CSU_CSLX_DSPI1, CSU_ALL_RW }, ++ { CSU_CSLX_QSPI, CSU_ALL_RW }, ++ { CSU_CSLX_ESDHC, CSU_ALL_RW }, ++ { CSU_CSLX_2D_ACE, CSU_ALL_RW }, ++ { CSU_CSLX_IFC, CSU_ALL_RW }, ++ { CSU_CSLX_I2C1, CSU_ALL_RW }, ++ { CSU_CSLX_USB2, CSU_ALL_RW }, ++ { CSU_CSLX_I2C3, CSU_ALL_RW }, ++ { CSU_CSLX_I2C2, CSU_ALL_RW }, ++ { CSU_CSLX_DUART2, CSU_ALL_RW }, ++ { CSU_CSLX_DUART1, CSU_ALL_RW }, ++ { CSU_CSLX_WDT2, CSU_ALL_RW }, ++ { CSU_CSLX_WDT1, CSU_ALL_RW }, ++ { CSU_CSLX_EDMA, CSU_ALL_RW }, ++ { CSU_CSLX_SYS_CNT, CSU_ALL_RW }, ++ { CSU_CSLX_DMA_MUX2, CSU_ALL_RW }, ++ { CSU_CSLX_DMA_MUX1, CSU_ALL_RW }, ++ { CSU_CSLX_DDR, CSU_ALL_RW }, ++ { CSU_CSLX_QUICC, CSU_ALL_RW }, ++ { CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW }, ++ { CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW }, ++ { CSU_CSLX_SFP, CSU_ALL_RW }, ++ { CSU_CSLX_TMU, CSU_ALL_RW }, ++ { CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW }, ++ { CSU_CSLX_RESERVED0, CSU_ALL_RW }, ++ { CSU_CSLX_ETSEC1, CSU_ALL_RW }, ++ { CSU_CSLX_SEC5_5, CSU_ALL_RW }, ++ { CSU_CSLX_ETSEC3, CSU_ALL_RW }, ++ { CSU_CSLX_ETSEC2, CSU_ALL_RW }, ++ { CSU_CSLX_GPIO2, CSU_ALL_RW }, ++ { CSU_CSLX_GPIO1, CSU_ALL_RW }, ++ { CSU_CSLX_GPIO4, CSU_ALL_RW }, ++ { CSU_CSLX_GPIO3, CSU_ALL_RW }, ++ { CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW }, ++ { CSU_CSLX_CSU, CSU_ALL_RW }, ++ { CSU_CSLX_ASRC, CSU_ALL_RW }, ++ { CSU_CSLX_SPDIF, CSU_ALL_RW }, ++ { CSU_CSLX_FLEXCAN2, CSU_ALL_RW }, ++ { CSU_CSLX_FLEXCAN1, CSU_ALL_RW }, ++ { CSU_CSLX_FLEXCAN4, CSU_ALL_RW }, ++ { CSU_CSLX_FLEXCAN3, CSU_ALL_RW }, ++ { CSU_CSLX_SAI2, CSU_ALL_RW }, ++ { CSU_CSLX_SAI1, CSU_ALL_RW }, ++ { CSU_CSLX_SAI4, CSU_ALL_RW }, ++ { CSU_CSLX_SAI3, CSU_ALL_RW }, ++ { CSU_CSLX_FTM2, CSU_ALL_RW }, ++ { CSU_CSLX_FTM1, CSU_ALL_RW }, ++ { CSU_CSLX_FTM4, CSU_ALL_RW }, ++ { CSU_CSLX_FTM3, CSU_ALL_RW }, ++ { CSU_CSLX_FTM6, CSU_ALL_RW }, ++ { CSU_CSLX_FTM5, CSU_ALL_RW }, ++ { CSU_CSLX_FTM8, CSU_ALL_RW }, ++ { CSU_CSLX_FTM7, CSU_ALL_RW }, ++ { CSU_CSLX_COP_DCSR, CSU_ALL_RW }, ++ { CSU_CSLX_EPU, CSU_ALL_RW }, ++ { CSU_CSLX_GDI, CSU_ALL_RW }, ++ { CSU_CSLX_DDI, CSU_ALL_RW }, ++ { CSU_CSLX_RESERVED1, CSU_ALL_RW }, ++ { CSU_CSLX_USB3_PHY, CSU_ALL_RW }, ++ { CSU_CSLX_RESERVED2, CSU_ALL_RW }, ++}; + #endif + ++struct smmu_stream_id dev_stream_id[] = { ++ { 0x100, 0x01, "ETSEC MAC1" }, ++ { 0x104, 0x02, "ETSEC MAC2" }, ++ { 0x108, 0x03, "ETSEC MAC3" }, ++ { 0x10c, 0x04, "PEX1" }, ++ { 0x110, 0x05, "PEX2" }, ++ { 0x114, 0x06, "qDMA" }, ++ { 0x118, 0x07, "SATA" }, ++ { 0x11c, 0x08, "USB3" }, ++ { 0x120, 0x09, "QE" }, ++ { 0x124, 0x0a, "eSDHC" }, ++ { 0x128, 0x0b, "eMA" }, ++ { 0x14c, 0x0c, "2D-ACE" }, ++ { 0x150, 0x0d, "USB2" }, ++ { 0x18c, 0x0e, "DEBUG" }, ++}; ++ + int board_init(void) + { + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; +@@ -247,6 +489,13 @@ + config_serdes_mux(); + #endif + ++ ls102xa_config_smmu_stream_id(dev_stream_id, ++ ARRAY_SIZE(dev_stream_id)); ++ ++#ifdef CONFIG_LS102XA_NS_ACCESS ++ enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev)); ++#endif ++ + #ifdef CONFIG_U_QE + u_qe_init(); + #endif +@@ -258,6 +507,10 @@ + { + ft_cpu_setup(blob, bd); + ++#ifdef CONFIG_PCIE_LAYERSCAPE ++ ft_pcie_setup(blob, bd); ++#endif ++ + return 0; + } + +diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_pbi.cfg u-boot/board/freescale/ls1021aqds/ls102xa_pbi.cfg +--- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_pbi.cfg 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/freescale/ls1021aqds/ls102xa_pbi.cfg 2015-01-01 17:34:32.361501481 +0100 +@@ -0,0 +1,12 @@ ++#PBI commands ++ ++09570200 ffffffff ++09570158 00000300 ++8940007c 21f47300 ++ ++#Configure Scratch register ++09ee0200 10000000 ++#Configure alternate space ++09570158 00001000 ++#Flush PBL data ++096100c0 000FFFFF +diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg u-boot/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg +--- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg 2015-01-01 17:34:32.361501481 +0100 +@@ -0,0 +1,7 @@ ++#PBL preamble and RCW header ++aa55aa55 01ee0100 ++# serdes protocol ++0608000a 00000000 00000000 00000000 ++60000000 00407900 e0106a00 21046000 ++00000000 00000000 00000000 00038000 ++00000000 001b7200 00000000 00000000 +diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg u-boot/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg +--- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg 2015-01-01 17:34:32.361501481 +0100 +@@ -0,0 +1,14 @@ ++#PBL preamble and RCW header ++aa55aa55 01ee0100 ++ ++#enable IFC, disable QSPI and DSPI ++0608000a 00000000 00000000 00000000 ++60000000 00407900 60040a00 21046000 ++00000000 00000000 00000000 00038000 ++00000000 001b7200 00000000 00000000 ++ ++#disable IFC, enable QSPI and DSPI ++#0608000a 00000000 00000000 00000000 ++#60000000 00407900 60040a00 21046000 ++#00000000 00000000 00000000 00038000 ++#20024800 001b7200 00000000 00000000 +diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/MAINTAINERS u-boot/board/freescale/ls1021aqds/MAINTAINERS +--- u-boot-2015.01-rc3/board/freescale/ls1021aqds/MAINTAINERS 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/freescale/ls1021aqds/MAINTAINERS 2015-01-01 17:34:32.361501481 +0100 +@@ -6,3 +6,6 @@ + F: configs/ls1021aqds_nor_defconfig + F: configs/ls1021aqds_ddr4_nor_defconfig + F: configs/ls1021aqds_nor_SECURE_BOOT_defconfig ++F: configs/ls1021aqds_sdcard_defconfig ++F: configs/ls1021aqds_qspi_defconfig ++F: configs/ls1021aqds_nand_defconfig +diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls1021atwr.c u-boot/board/freescale/ls1021atwr/ls1021atwr.c +--- u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls1021atwr.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/freescale/ls1021atwr/ls1021atwr.c 2015-01-01 17:34:32.361501481 +0100 +@@ -8,8 +8,11 @@ + #include + #include + #include ++#include + #include + #include ++#include ++#include + #include + #include + #include +@@ -17,6 +20,7 @@ + #include + #include + #include ++#include + #ifdef CONFIG_U_QE + #include "../../../drivers/qe/qe.h" + #endif +@@ -70,6 +74,7 @@ + u8 rev2; /* Reserved */ + }; + ++#ifndef CONFIG_QSPI_BOOT + static void convert_serdes_mux(int type, int need_reset); + + void cpld_show(void) +@@ -105,11 +110,14 @@ + in_8(&cpld_data->serdes_mux)); + #endif + } ++#endif + + int checkboard(void) + { + puts("Board: LS1021ATWR\n"); ++#ifndef CONFIG_QSPI_BOOT + cpld_show(); ++#endif + + return 0; + } +@@ -218,6 +226,7 @@ + } + #endif + ++#ifndef CONFIG_QSPI_BOOT + int config_serdes_mux(void) + { + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); +@@ -249,6 +258,7 @@ + + return 0; + } ++#endif + + int board_early_init_f(void) + { +@@ -267,9 +277,135 @@ + out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN); + #endif + ++#ifdef CONFIG_FSL_QSPI ++ out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); ++#endif ++ + return 0; + } + ++#ifdef CONFIG_SPL_BUILD ++void board_init_f(ulong dummy) ++{ ++ /* Set global data pointer */ ++ gd = &gdata; ++ ++ /* Clear the BSS */ ++ memset(__bss_start, 0, __bss_end - __bss_start); ++ ++ get_clocks(); ++ ++ preloader_console_init(); ++ ++ dram_init(); ++ ++ board_init_r(NULL, 0); ++} ++#endif ++ ++#ifdef CONFIG_LS102XA_NS_ACCESS ++static struct csu_ns_dev ns_dev[] = { ++ { CSU_CSLX_PCIE2_IO, CSU_ALL_RW }, ++ { CSU_CSLX_PCIE1_IO, CSU_ALL_RW }, ++ { CSU_CSLX_MG2TPR_IP, CSU_ALL_RW }, ++ { CSU_CSLX_IFC_MEM, CSU_ALL_RW }, ++ { CSU_CSLX_OCRAM, CSU_ALL_RW }, ++ { CSU_CSLX_GIC, CSU_ALL_RW }, ++ { CSU_CSLX_PCIE1, CSU_ALL_RW }, ++ { CSU_CSLX_OCRAM2, CSU_ALL_RW }, ++ { CSU_CSLX_QSPI_MEM, CSU_ALL_RW }, ++ { CSU_CSLX_PCIE2, CSU_ALL_RW }, ++ { CSU_CSLX_SATA, CSU_ALL_RW }, ++ { CSU_CSLX_USB3, CSU_ALL_RW }, ++ { CSU_CSLX_SERDES, CSU_ALL_RW }, ++ { CSU_CSLX_QDMA, CSU_ALL_RW }, ++ { CSU_CSLX_LPUART2, CSU_ALL_RW }, ++ { CSU_CSLX_LPUART1, CSU_ALL_RW }, ++ { CSU_CSLX_LPUART4, CSU_ALL_RW }, ++ { CSU_CSLX_LPUART3, CSU_ALL_RW }, ++ { CSU_CSLX_LPUART6, CSU_ALL_RW }, ++ { CSU_CSLX_LPUART5, CSU_ALL_RW }, ++ { CSU_CSLX_DSPI2, CSU_ALL_RW }, ++ { CSU_CSLX_DSPI1, CSU_ALL_RW }, ++ { CSU_CSLX_QSPI, CSU_ALL_RW }, ++ { CSU_CSLX_ESDHC, CSU_ALL_RW }, ++ { CSU_CSLX_2D_ACE, CSU_ALL_RW }, ++ { CSU_CSLX_IFC, CSU_ALL_RW }, ++ { CSU_CSLX_I2C1, CSU_ALL_RW }, ++ { CSU_CSLX_USB2, CSU_ALL_RW }, ++ { CSU_CSLX_I2C3, CSU_ALL_RW }, ++ { CSU_CSLX_I2C2, CSU_ALL_RW }, ++ { CSU_CSLX_DUART2, CSU_ALL_RW }, ++ { CSU_CSLX_DUART1, CSU_ALL_RW }, ++ { CSU_CSLX_WDT2, CSU_ALL_RW }, ++ { CSU_CSLX_WDT1, CSU_ALL_RW }, ++ { CSU_CSLX_EDMA, CSU_ALL_RW }, ++ { CSU_CSLX_SYS_CNT, CSU_ALL_RW }, ++ { CSU_CSLX_DMA_MUX2, CSU_ALL_RW }, ++ { CSU_CSLX_DMA_MUX1, CSU_ALL_RW }, ++ { CSU_CSLX_DDR, CSU_ALL_RW }, ++ { CSU_CSLX_QUICC, CSU_ALL_RW }, ++ { CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW }, ++ { CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW }, ++ { CSU_CSLX_SFP, CSU_ALL_RW }, ++ { CSU_CSLX_TMU, CSU_ALL_RW }, ++ { CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW }, ++ { CSU_CSLX_RESERVED0, CSU_ALL_RW }, ++ { CSU_CSLX_ETSEC1, CSU_ALL_RW }, ++ { CSU_CSLX_SEC5_5, CSU_ALL_RW }, ++ { CSU_CSLX_ETSEC3, CSU_ALL_RW }, ++ { CSU_CSLX_ETSEC2, CSU_ALL_RW }, ++ { CSU_CSLX_GPIO2, CSU_ALL_RW }, ++ { CSU_CSLX_GPIO1, CSU_ALL_RW }, ++ { CSU_CSLX_GPIO4, CSU_ALL_RW }, ++ { CSU_CSLX_GPIO3, CSU_ALL_RW }, ++ { CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW }, ++ { CSU_CSLX_CSU, CSU_ALL_RW }, ++ { CSU_CSLX_ASRC, CSU_ALL_RW }, ++ { CSU_CSLX_SPDIF, CSU_ALL_RW }, ++ { CSU_CSLX_FLEXCAN2, CSU_ALL_RW }, ++ { CSU_CSLX_FLEXCAN1, CSU_ALL_RW }, ++ { CSU_CSLX_FLEXCAN4, CSU_ALL_RW }, ++ { CSU_CSLX_FLEXCAN3, CSU_ALL_RW }, ++ { CSU_CSLX_SAI2, CSU_ALL_RW }, ++ { CSU_CSLX_SAI1, CSU_ALL_RW }, ++ { CSU_CSLX_SAI4, CSU_ALL_RW }, ++ { CSU_CSLX_SAI3, CSU_ALL_RW }, ++ { CSU_CSLX_FTM2, CSU_ALL_RW }, ++ { CSU_CSLX_FTM1, CSU_ALL_RW }, ++ { CSU_CSLX_FTM4, CSU_ALL_RW }, ++ { CSU_CSLX_FTM3, CSU_ALL_RW }, ++ { CSU_CSLX_FTM6, CSU_ALL_RW }, ++ { CSU_CSLX_FTM5, CSU_ALL_RW }, ++ { CSU_CSLX_FTM8, CSU_ALL_RW }, ++ { CSU_CSLX_FTM7, CSU_ALL_RW }, ++ { CSU_CSLX_COP_DCSR, CSU_ALL_RW }, ++ { CSU_CSLX_EPU, CSU_ALL_RW }, ++ { CSU_CSLX_GDI, CSU_ALL_RW }, ++ { CSU_CSLX_DDI, CSU_ALL_RW }, ++ { CSU_CSLX_RESERVED1, CSU_ALL_RW }, ++ { CSU_CSLX_USB3_PHY, CSU_ALL_RW }, ++ { CSU_CSLX_RESERVED2, CSU_ALL_RW }, ++}; ++#endif ++ ++struct smmu_stream_id dev_stream_id[] = { ++ { 0x100, 0x01, "ETSEC MAC1" }, ++ { 0x104, 0x02, "ETSEC MAC2" }, ++ { 0x108, 0x03, "ETSEC MAC3" }, ++ { 0x10c, 0x04, "PEX1" }, ++ { 0x110, 0x05, "PEX2" }, ++ { 0x114, 0x06, "qDMA" }, ++ { 0x118, 0x07, "SATA" }, ++ { 0x11c, 0x08, "USB3" }, ++ { 0x120, 0x09, "QE" }, ++ { 0x124, 0x0a, "eSDHC" }, ++ { 0x128, 0x0b, "eMA" }, ++ { 0x14c, 0x0c, "2D-ACE" }, ++ { 0x150, 0x0d, "USB2" }, ++ { 0x18c, 0x0e, "DEBUG" }, ++}; ++ + int board_init(void) + { + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; +@@ -284,8 +420,17 @@ + + #ifndef CONFIG_SYS_FSL_NO_SERDES + fsl_serdes_init(); ++#ifndef CONFIG_QSPI_BOOT + config_serdes_mux(); + #endif ++#endif ++ ++ ls102xa_config_smmu_stream_id(dev_stream_id, ++ ARRAY_SIZE(dev_stream_id)); ++ ++#ifdef CONFIG_LS102XA_NS_ACCESS ++ enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev)); ++#endif + + #ifdef CONFIG_U_QE + u_qe_init(); +@@ -307,6 +452,10 @@ + { + ft_cpu_setup(blob, bd); + ++#ifdef CONFIG_PCIE_LAYERSCAPE ++ ft_pcie_setup(blob, bd); ++#endif ++ + return 0; + } + +@@ -329,6 +478,7 @@ + return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00); + } + ++#ifndef CONFIG_QSPI_BOOT + static void convert_flash_bank(char bank) + { + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); +@@ -511,3 +661,4 @@ + " -change lane C & lane D to PCIeX2\n" + "\nWARNING: If you aren't familiar with the setting of serdes, don't try to change anything!\n" + ); ++#endif +diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls102xa_pbi.cfg u-boot/board/freescale/ls1021atwr/ls102xa_pbi.cfg +--- u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls102xa_pbi.cfg 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/freescale/ls1021atwr/ls102xa_pbi.cfg 2015-01-01 17:34:32.361501481 +0100 +@@ -0,0 +1,12 @@ ++#PBI commands ++ ++09570200 ffffffff ++09570158 00000300 ++8940007c 21f47300 ++ ++#Configure Scratch register ++09ee0200 10000000 ++#Configure alternate space ++09570158 00001000 ++#Flush PBL data ++096100c0 000FFFFF +diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg u-boot/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg +--- u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg 2015-01-01 17:34:32.361501481 +0100 +@@ -0,0 +1,14 @@ ++#PBL preamble and RCW header ++aa55aa55 01ee0100 ++ ++#enable IFC, disable QSPI and DSPI ++0608000a 00000000 00000000 00000000 ++20000000 00407900 60040a00 21046000 ++00000000 00000000 00000000 00038000 ++00080000 881b7340 00000000 00000000 ++ ++#disable IFC, enable QSPI and DSPI ++#0608000a 00000000 00000000 00000000 ++#20000000 00407900 60040a00 21046000 ++#00000000 00000000 00000000 00038000 ++#20084800 881b7340 00000000 00000000 +diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021atwr/MAINTAINERS u-boot/board/freescale/ls1021atwr/MAINTAINERS +--- u-boot-2015.01-rc3/board/freescale/ls1021atwr/MAINTAINERS 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/freescale/ls1021atwr/MAINTAINERS 2015-01-01 17:34:32.361501481 +0100 +@@ -5,3 +5,5 @@ + F: include/configs/ls1021atwr.h + F: configs/ls1021atwr_nor_defconfig + F: configs/ls1021atwr_nor_SECURE_BOOT_defconfig ++F: configs/ls1021atwr_sdcard_defconfig ++F: configs/ls1021atwr_qspi_defconfig +diff -ruN u-boot-2015.01-rc3/board/freescale/mx6slevk/mx6slevk.c u-boot/board/freescale/mx6slevk/mx6slevk.c +--- u-boot-2015.01-rc3/board/freescale/mx6slevk/mx6slevk.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/freescale/mx6slevk/mx6slevk.c 2015-01-01 17:34:32.381501153 +0100 +@@ -20,6 +20,8 @@ + #include + #include + #include ++#include ++#include + + DECLARE_GLOBAL_DATA_PTR; + +@@ -234,10 +236,52 @@ + /* clear gpr1[14], gpr1[18:17] to select anatop clock */ + clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0); + +- return enable_fec_anatop_clock(ENET_50MHz); ++ return enable_fec_anatop_clock(ENET_50MHZ); + } + #endif + ++#ifdef CONFIG_USB_EHCI_MX6 ++#define USB_OTHERREGS_OFFSET 0x800 ++#define UCTRL_PWR_POL (1 << 9) ++ ++static iomux_v3_cfg_t const usb_otg_pads[] = { ++ /* OTG1 */ ++ MX6_PAD_KEY_COL4__USB_USBOTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), ++ MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL), ++ /* OTG2 */ ++ MX6_PAD_KEY_COL5__USB_USBOTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL) ++}; ++ ++static void setup_usb(void) ++{ ++ imx_iomux_v3_setup_multiple_pads(usb_otg_pads, ++ ARRAY_SIZE(usb_otg_pads)); ++} ++ ++int board_usb_phy_mode(int port) ++{ ++ if (port == 1) ++ return USB_INIT_HOST; ++ else ++ return usb_phy_mode(port); ++} ++ ++int board_ehci_hcd_init(int port) ++{ ++ u32 *usbnc_usb_ctrl; ++ ++ if (port > 1) ++ return -EINVAL; ++ ++ usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET + ++ port * 4); ++ ++ /* Set Power polarity */ ++ setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL); ++ ++ return 0; ++} ++#endif + + int board_early_init_f(void) + { +@@ -256,6 +300,11 @@ + #ifdef CONFIG_FEC_MXC + setup_fec(); + #endif ++ ++#ifdef CONFIG_USB_EHCI_MX6 ++ setup_usb(); ++#endif ++ + return 0; + } + +diff -ruN u-boot-2015.01-rc3/board/freescale/mx6sxsabresd/mx6sxsabresd.c u-boot/board/freescale/mx6sxsabresd/mx6sxsabresd.c +--- u-boot-2015.01-rc3/board/freescale/mx6sxsabresd/mx6sxsabresd.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/freescale/mx6sxsabresd/mx6sxsabresd.c 2015-01-01 17:34:32.381501153 +0100 +@@ -26,6 +26,8 @@ + #include + #include + #include "../common/pfuze.h" ++#include ++#include + + DECLARE_GLOBAL_DATA_PTR; + +@@ -168,7 +170,7 @@ + reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE; + writel(reg, &anatop->pll_enet); + +- return enable_fec_anatop_clock(ENET_125MHz); ++ return enable_fec_anatop_clock(ENET_125MHZ); + } + + int board_eth_init(bd_t *bis) +@@ -212,6 +214,49 @@ + return 0; + } + ++#ifdef CONFIG_USB_EHCI_MX6 ++#define USB_OTHERREGS_OFFSET 0x800 ++#define UCTRL_PWR_POL (1 << 9) ++ ++static iomux_v3_cfg_t const usb_otg_pads[] = { ++ /* OGT1 */ ++ MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), ++ MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL), ++ /* OTG2 */ ++ MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL) ++}; ++ ++static void setup_usb(void) ++{ ++ imx_iomux_v3_setup_multiple_pads(usb_otg_pads, ++ ARRAY_SIZE(usb_otg_pads)); ++} ++ ++int board_usb_phy_mode(int port) ++{ ++ if (port == 1) ++ return USB_INIT_HOST; ++ else ++ return usb_phy_mode(port); ++} ++ ++int board_ehci_hcd_init(int port) ++{ ++ u32 *usbnc_usb_ctrl; ++ ++ if (port > 1) ++ return -EINVAL; ++ ++ usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET + ++ port * 4); ++ ++ /* Set Power polarity */ ++ setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL); ++ ++ return 0; ++} ++#endif ++ + int board_phy_config(struct phy_device *phydev) + { + /* +@@ -242,6 +287,10 @@ + /* Active high for ncp692 */ + gpio_direction_output(IMX_GPIO_NR(4, 16) , 1); + ++#ifdef CONFIG_USB_EHCI_MX6 ++ setup_usb(); ++#endif ++ + return 0; + } + +@@ -322,7 +371,6 @@ + return 0; + } + +- + int board_init(void) + { + /* Address of boot parameters */ +diff -ruN u-boot-2015.01-rc3/board/freescale/t104xrdb/ddr.c u-boot/board/freescale/t104xrdb/ddr.c +--- u-boot-2015.01-rc3/board/freescale/t104xrdb/ddr.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/freescale/t104xrdb/ddr.c 2015-01-01 17:34:32.389501022 +0100 +@@ -11,6 +11,7 @@ + #include + #include + #include ++#include + #include "ddr.h" + + DECLARE_GLOBAL_DATA_PTR; +@@ -109,6 +110,19 @@ + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); + } + ++#if defined(CONFIG_DEEP_SLEEP) ++void board_mem_sleep_setup(void) ++{ ++ void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE; ++ ++ /* does not provide HW signals for power management */ ++ clrbits_8(cpld_base + 0x17, 0x40); ++ /* Disable MCKE isolation */ ++ gpio_set_value(2, 0); ++ udelay(1); ++} ++#endif ++ + phys_size_t initdram(int board_type) + { + phys_size_t dram_size; +@@ -124,5 +138,10 @@ + #else + dram_size = fsl_ddr_sdram_size(); + #endif ++ ++#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) ++ fsl_dp_resume(); ++#endif ++ + return dram_size; + } +diff -ruN u-boot-2015.01-rc3/board/freescale/t104xrdb/spl.c u-boot/board/freescale/t104xrdb/spl.c +--- u-boot-2015.01-rc3/board/freescale/t104xrdb/spl.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/freescale/t104xrdb/spl.c 2015-01-01 17:34:32.389501022 +0100 +@@ -11,7 +11,7 @@ + #include + #include + #include +-#include ++#include "../common/sleep.h" + + DECLARE_GLOBAL_DATA_PTR; + +@@ -64,8 +64,8 @@ + + #ifdef CONFIG_DEEP_SLEEP + /* disable the console if boot from deep sleep */ +- if (in_be32(&gur->scrtsr[0]) & (1 << 3)) +- gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE; ++ if (is_warm_boot()) ++ fsl_dp_disable_console(); + #endif + /* compiler optimization barrier needed for GCC >= 3.4 */ + __asm__ __volatile__("" : : : "memory"); +@@ -132,16 +132,3 @@ + nand_boot(); + #endif + } +- +-#ifdef CONFIG_DEEP_SLEEP +-void board_mem_sleep_setup(void) +-{ +- void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE; +- +- /* does not provide HW signals for power management */ +- clrbits_8(cpld_base + 0x17, 0x40); +- /* Disable MCKE isolation */ +- gpio_set_value(2, 0); +- udelay(1); +-} +-#endif +diff -ruN u-boot-2015.01-rc3/board/freescale/t104xrdb/t104xrdb.c u-boot/board/freescale/t104xrdb/t104xrdb.c +--- u-boot-2015.01-rc3/board/freescale/t104xrdb/t104xrdb.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/freescale/t104xrdb/t104xrdb.c 2015-01-01 17:34:32.389501022 +0100 +@@ -17,8 +17,7 @@ + #include + #include + #include +-#include +- ++#include "../common/sleep.h" + #include "t104xrdb.h" + #include "cpld.h" + +@@ -44,6 +43,16 @@ + return 0; + } + ++int board_early_init_f(void) ++{ ++#if defined(CONFIG_DEEP_SLEEP) ++ if (is_warm_boot()) ++ fsl_dp_disable_console(); ++#endif ++ ++ return 0; ++} ++ + int board_early_init_r(void) + { + #ifdef CONFIG_SYS_FLASH_BASE +@@ -113,14 +122,3 @@ + + return 0; + } +- +-#ifdef CONFIG_DEEP_SLEEP +-void board_mem_sleep_setup(void) +-{ +- /* does not provide HW signals for power management */ +- CPLD_WRITE(misc_ctl_status, (CPLD_READ(misc_ctl_status) & ~0x40)); +- /* Disable MCKE isolation */ +- gpio_set_value(2, 0); +- udelay(1); +-} +-#endif +diff -ruN u-boot-2015.01-rc3/board/google/chromebook_link/Kconfig u-boot/board/google/chromebook_link/Kconfig +--- u-boot-2015.01-rc3/board/google/chromebook_link/Kconfig 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/google/chromebook_link/Kconfig 2015-01-01 17:34:32.401500826 +0100 +@@ -19,6 +19,7 @@ + select SOUTHBRIDGE_INTEL_C216 + select HAVE_ACPI_RESUME + select MARK_GRAPHICS_MEM_WRCOMB ++ select BOARD_ROMSIZE_KB_8192 + + config MMCONF_BASE_ADDRESS + hex +diff -ruN u-boot-2015.01-rc3/board/google/chromebook_link/link.c u-boot/board/google/chromebook_link/link.c +--- u-boot-2015.01-rc3/board/google/chromebook_link/link.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/google/chromebook_link/link.c 2015-01-01 17:34:32.401500826 +0100 +@@ -7,6 +7,9 @@ + #include + #include + #include ++#include ++#include ++#include + + int arch_early_init_r(void) + { +@@ -121,3 +124,40 @@ + + return 0; + } ++ ++void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio) ++{ ++ /* GPIO Set 1 */ ++ if (gpio->set1.level) ++ outl(*((u32 *)gpio->set1.level), gpiobase + GP_LVL); ++ if (gpio->set1.mode) ++ outl(*((u32 *)gpio->set1.mode), gpiobase + GPIO_USE_SEL); ++ if (gpio->set1.direction) ++ outl(*((u32 *)gpio->set1.direction), gpiobase + GP_IO_SEL); ++ if (gpio->set1.reset) ++ outl(*((u32 *)gpio->set1.reset), gpiobase + GP_RST_SEL1); ++ if (gpio->set1.invert) ++ outl(*((u32 *)gpio->set1.invert), gpiobase + GPI_INV); ++ if (gpio->set1.blink) ++ outl(*((u32 *)gpio->set1.blink), gpiobase + GPO_BLINK); ++ ++ /* GPIO Set 2 */ ++ if (gpio->set2.level) ++ outl(*((u32 *)gpio->set2.level), gpiobase + GP_LVL2); ++ if (gpio->set2.mode) ++ outl(*((u32 *)gpio->set2.mode), gpiobase + GPIO_USE_SEL2); ++ if (gpio->set2.direction) ++ outl(*((u32 *)gpio->set2.direction), gpiobase + GP_IO_SEL2); ++ if (gpio->set2.reset) ++ outl(*((u32 *)gpio->set2.reset), gpiobase + GP_RST_SEL2); ++ ++ /* GPIO Set 3 */ ++ if (gpio->set3.level) ++ outl(*((u32 *)gpio->set3.level), gpiobase + GP_LVL3); ++ if (gpio->set3.mode) ++ outl(*((u32 *)gpio->set3.mode), gpiobase + GPIO_USE_SEL3); ++ if (gpio->set3.direction) ++ outl(*((u32 *)gpio->set3.direction), gpiobase + GP_IO_SEL3); ++ if (gpio->set3.reset) ++ outl(*((u32 *)gpio->set3.reset), gpiobase + GP_RST_SEL3); ++} +diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/crownbay.c u-boot/board/intel/crownbay/crownbay.c +--- u-boot-2015.01-rc3/board/intel/crownbay/crownbay.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/intel/crownbay/crownbay.c 2015-01-01 17:34:32.405500760 +0100 +@@ -0,0 +1,32 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#define SERIAL_DEV PNP_DEV(0x2e, 4) ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++int board_early_init_f(void) ++{ ++ lpc47m_enable_serial(SERIAL_DEV, UART0_BASE); ++ ++ return 0; ++} ++ ++void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio) ++{ ++ return; ++} ++ ++int board_eth_init(bd_t *bis) ++{ ++ return pci_eth_init(bis); ++} +diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/Kconfig u-boot/board/intel/crownbay/Kconfig +--- u-boot-2015.01-rc3/board/intel/crownbay/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/intel/crownbay/Kconfig 2015-01-01 17:34:32.405500760 +0100 +@@ -0,0 +1,20 @@ ++if TARGET_CROWNBAY ++ ++config SYS_BOARD ++ default "crownbay" ++ ++config SYS_VENDOR ++ default "intel" ++ ++config SYS_SOC ++ default "queensbay" ++ ++config SYS_CONFIG_NAME ++ default "crownbay" ++ ++config BOARD_SPECIFIC_OPTIONS # dummy ++ def_bool y ++ select INTEL_QUEENSBAY ++ select BOARD_ROMSIZE_KB_1024 ++ ++endif +diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/MAINTAINERS u-boot/board/intel/crownbay/MAINTAINERS +--- u-boot-2015.01-rc3/board/intel/crownbay/MAINTAINERS 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/intel/crownbay/MAINTAINERS 2015-01-01 17:34:32.405500760 +0100 +@@ -0,0 +1,6 @@ ++INTEL CROWNBAY BOARD ++M: Bin Meng ++S: Maintained ++F: board/intel/crownbay/ ++F: include/configs/crownbay.h ++F: configs/crownbay_defconfig +diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/Makefile u-boot/board/intel/crownbay/Makefile +--- u-boot-2015.01-rc3/board/intel/crownbay/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/intel/crownbay/Makefile 2015-01-01 17:34:32.405500760 +0100 +@@ -0,0 +1,7 @@ ++# ++# Copyright (C) 2014, Bin Meng ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++obj-y += crownbay.o start.o +diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/start.S u-boot/board/intel/crownbay/start.S +--- u-boot-2015.01-rc3/board/intel/crownbay/start.S 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/intel/crownbay/start.S 2015-01-01 17:34:32.405500760 +0100 +@@ -0,0 +1,9 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++.globl early_board_init ++early_board_init: ++ jmp early_board_init_ret +diff -ruN u-boot-2015.01-rc3/board/nvidia/cardhu/cardhu.c u-boot/board/nvidia/cardhu/cardhu.c +--- u-boot-2015.01-rc3/board/nvidia/cardhu/cardhu.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/nvidia/cardhu/cardhu.c 2015-01-01 17:34:32.449500039 +0100 +@@ -6,6 +6,7 @@ + */ + + #include ++#include + #include + #include + #include "pinmux-config-cardhu.h" +@@ -37,17 +38,23 @@ + */ + void board_sdmmc_voltage_init(void) + { ++ struct udevice *dev; + uchar reg, data_buffer[1]; ++ int ret; + int i; + +- i2c_set_bus_num(0); /* PMU is on bus 0 */ ++ ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev); ++ if (ret) { ++ debug("%s: Cannot find PMIC I2C chip\n", __func__); ++ return; ++ } + + /* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 */ + data_buffer[0] = 0x65; + reg = 0x32; + + for (i = 0; i < MAX_I2C_RETRY; ++i) { +- if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1)) ++ if (i2c_write(dev, reg, data_buffer, 1)) + udelay(100); + } + +@@ -56,7 +63,7 @@ + reg = 0x67; + + for (i = 0; i < MAX_I2C_RETRY; ++i) { +- if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1)) ++ if (i2c_write(dev, reg, data_buffer, 1)) + udelay(100); + } + } +diff -ruN u-boot-2015.01-rc3/board/nvidia/common/board.c u-boot/board/nvidia/common/board.c +--- u-boot-2015.01-rc3/board/nvidia/common/board.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/nvidia/common/board.c 2015-01-01 17:34:32.453499973 +0100 +@@ -113,10 +113,6 @@ + power_det_init(); + + #ifdef CONFIG_SYS_I2C_TEGRA +-#ifndef CONFIG_SYS_I2C_INIT_BOARD +-#error "You must define CONFIG_SYS_I2C_INIT_BOARD to use i2c on Nvidia boards" +-#endif +- i2c_init_board(); + # ifdef CONFIG_TEGRA_PMU + if (pmu_set_nominal()) + debug("Failed to select nominal voltages\n"); +diff -ruN u-boot-2015.01-rc3/board/nvidia/dalmore/dalmore.c u-boot/board/nvidia/dalmore/dalmore.c +--- u-boot-2015.01-rc3/board/nvidia/dalmore/dalmore.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/nvidia/dalmore/dalmore.c 2015-01-01 17:34:32.453499973 +0100 +@@ -15,6 +15,7 @@ + */ + + #include ++#include + #include + #include + #include "pinmux-config-dalmore.h" +@@ -50,18 +51,21 @@ + */ + void board_sdmmc_voltage_init(void) + { ++ struct udevice *dev; + uchar reg, data_buffer[1]; + int ret; + +- ret = i2c_set_bus_num(0);/* PMU is on bus 0 */ +- if (ret) +- printf("%s: i2c_set_bus_num returned %d\n", __func__, ret); ++ ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev); ++ if (ret) { ++ debug("%s: Cannot find PMIC I2C chip\n", __func__); ++ return; ++ } + + /* TPS65913: LDO9_VOLTAGE = 3.3V */ + data_buffer[0] = 0x31; + reg = 0x61; + +- ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1); ++ ret = i2c_write(dev, reg, data_buffer, 1); + if (ret) + printf("%s: PMU i2c_write %02X<-%02X returned %d\n", + __func__, reg, data_buffer[0], ret); +@@ -70,7 +74,7 @@ + data_buffer[0] = 0x01; + reg = 0x60; + +- ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1); ++ ret = i2c_write(dev, reg, data_buffer, 1); + if (ret) + printf("%s: PMU i2c_write %02X<-%02X returned %d\n", + __func__, reg, data_buffer[0], ret); +@@ -79,7 +83,12 @@ + data_buffer[0] = 0x03; + reg = 0x14; + +- ret = i2c_write(BAT_I2C_ADDRESS, reg, 1, data_buffer, 1); ++ ret = i2c_get_chip_for_busnum(0, BAT_I2C_ADDRESS, &dev); ++ if (ret) { ++ debug("%s: Cannot find charger I2C chip\n", __func__); ++ return; ++ } ++ ret = i2c_write(dev, reg, data_buffer, 1); + if (ret) + printf("%s: BAT i2c_write %02X<-%02X returned %d\n", + __func__, reg, data_buffer[0], ret); +diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/Kconfig u-boot/board/nvidia/nyan-big/Kconfig +--- u-boot-2015.01-rc3/board/nvidia/nyan-big/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/nvidia/nyan-big/Kconfig 2015-01-01 17:34:32.453499973 +0100 +@@ -0,0 +1,24 @@ ++if TARGET_NYAN_BIG ++ ++config SYS_CPU ++ string ++ default "arm720t" if SPL_BUILD ++ default "armv7" if !SPL_BUILD ++ ++config SYS_BOARD ++ string ++ default "nyan-big" ++ ++config SYS_VENDOR ++ string ++ default "nvidia" ++ ++config SYS_SOC ++ string ++ default "tegra124" ++ ++config SYS_CONFIG_NAME ++ string ++ default "nyan-big" ++ ++endif +diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/MAINTAINERS u-boot/board/nvidia/nyan-big/MAINTAINERS +--- u-boot-2015.01-rc3/board/nvidia/nyan-big/MAINTAINERS 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/nvidia/nyan-big/MAINTAINERS 2015-01-01 17:34:32.453499973 +0100 +@@ -0,0 +1,6 @@ ++NORRIN BOARD ++M: Allen Martin ++S: Maintained ++F: board/nvidia/nyan-big/ ++F: include/configs/nyan-big.h ++F: configs/nyan-big_defconfig +diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/Makefile u-boot/board/nvidia/nyan-big/Makefile +--- u-boot-2015.01-rc3/board/nvidia/nyan-big/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/nvidia/nyan-big/Makefile 2015-01-01 17:34:32.453499973 +0100 +@@ -0,0 +1,9 @@ ++# ++# (C) Copyright 2014 ++# NVIDIA Corporation ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++obj-y += ../venice2/as3722_init.o ++obj-y += nyan-big.o +diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/nyan-big.c u-boot/board/nvidia/nyan-big/nyan-big.c +--- u-boot-2015.01-rc3/board/nvidia/nyan-big/nyan-big.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/nvidia/nyan-big/nyan-big.c 2015-01-01 17:34:32.453499973 +0100 +@@ -0,0 +1,27 @@ ++/* ++ * (C) Copyright 2014 ++ * NVIDIA Corporation ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include "pinmux-config-nyan-big.h" ++ ++/* ++ * Routine: pinmux_init ++ * Description: Do individual peripheral pinmux configs ++ */ ++void pinmux_init(void) ++{ ++ gpio_config_table(nyan_big_gpio_inits, ++ ARRAY_SIZE(nyan_big_gpio_inits)); ++ ++ pinmux_config_pingrp_table(nyan_big_pingrps, ++ ARRAY_SIZE(nyan_big_pingrps)); ++ ++ pinmux_config_drvgrp_table(nyan_big_drvgrps, ++ ARRAY_SIZE(nyan_big_drvgrps)); ++} +diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/pinmux-config-nyan-big.h u-boot/board/nvidia/nyan-big/pinmux-config-nyan-big.h +--- u-boot-2015.01-rc3/board/nvidia/nyan-big/pinmux-config-nyan-big.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/nvidia/nyan-big/pinmux-config-nyan-big.h 2015-01-01 17:34:32.453499973 +0100 +@@ -0,0 +1,287 @@ ++/* ++ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef _PINMUX_CONFIG_NYAN_BIG_H_ ++#define _PINMUX_CONFIG_NYAN_BIG_H_ ++ ++#define GPIO_INIT(_gpio, _init) \ ++ { \ ++ .gpio = GPIO_P##_gpio, \ ++ .init = TEGRA_GPIO_INIT_##_init, \ ++ } ++ ++static const struct tegra_gpio_config nyan_big_gpio_inits[] = { ++ /* gpio, init_val */ ++ GPIO_INIT(A0, IN), ++ GPIO_INIT(C7, IN), ++ GPIO_INIT(G0, IN), ++ GPIO_INIT(G1, IN), ++ GPIO_INIT(G2, IN), ++ GPIO_INIT(G3, IN), ++ GPIO_INIT(H2, IN), ++ GPIO_INIT(H4, IN), ++ GPIO_INIT(H6, IN), ++ GPIO_INIT(H7, OUT1), ++ GPIO_INIT(I0, IN), ++ GPIO_INIT(I1, IN), ++ GPIO_INIT(I5, OUT1), ++ GPIO_INIT(I6, IN), ++ GPIO_INIT(I7, IN), ++ GPIO_INIT(J0, IN), ++ GPIO_INIT(J7, IN), ++ GPIO_INIT(K1, OUT0), ++ GPIO_INIT(K2, IN), ++ GPIO_INIT(K4, OUT0), ++ GPIO_INIT(K6, OUT0), ++ GPIO_INIT(K7, IN), ++ GPIO_INIT(N7, IN), ++ GPIO_INIT(P2, OUT0), ++ GPIO_INIT(Q0, IN), ++ GPIO_INIT(Q2, IN), ++ GPIO_INIT(Q3, IN), ++ GPIO_INIT(Q6, IN), ++ GPIO_INIT(Q7, IN), ++ GPIO_INIT(R0, OUT0), ++ GPIO_INIT(R1, IN), ++ GPIO_INIT(R4, IN), ++ GPIO_INIT(R7, IN), ++ GPIO_INIT(S3, OUT0), ++ GPIO_INIT(S4, OUT0), ++ GPIO_INIT(S7, IN), ++ GPIO_INIT(T1, IN), ++ GPIO_INIT(U4, IN), ++ GPIO_INIT(U5, IN), ++ GPIO_INIT(U6, IN), ++ GPIO_INIT(V0, IN), ++ GPIO_INIT(W3, IN), ++ GPIO_INIT(X1, IN), ++ GPIO_INIT(X4, IN), ++ GPIO_INIT(X7, OUT0), ++}; ++ ++#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _rcv_sel) \ ++ { \ ++ .pingrp = PMUX_PINGRP_##_pingrp, \ ++ .func = PMUX_FUNC_##_mux, \ ++ .pull = PMUX_PULL_##_pull, \ ++ .tristate = PMUX_TRI_##_tri, \ ++ .io = PMUX_PIN_##_io, \ ++ .od = PMUX_PIN_OD_##_od, \ ++ .rcv_sel = PMUX_PIN_RCV_SEL_##_rcv_sel, \ ++ .lock = PMUX_PIN_LOCK_DEFAULT, \ ++ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ ++ } ++ ++static const struct pmux_pingrp_config nyan_big_pingrps[] = { ++ /* pingrp, mux, pull, tri, e_input, od, rcv_sel */ ++ PINCFG(CLK_32K_OUT_PA0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(UART3_CTS_N_PA1, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP2_FS_PA2, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP2_SCLK_PA3, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP2_DIN_PA4, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP2_DOUT_PA5, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC3_CLK_PA6, SDMMC3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC3_CMD_PA7, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PB0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PB1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC3_DAT3_PB4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC3_DAT2_PB5, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC3_DAT1_PB6, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC3_DAT0_PB7, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(UART3_RTS_N_PC0, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(UART2_TXD_PC2, IRDA, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(UART2_RXD_PC3, IRDA, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(GEN1_I2C_SCL_PC4, I2C1, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), ++ PINCFG(GEN1_I2C_SDA_PC5, I2C1, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), ++ PINCFG(PC7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PG0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PG1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PG2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PG3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PG4, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PG5, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PG6, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PG7, SPI4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PH0, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PH1, PWM1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PH2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PH3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PH4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PH5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PH6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PH7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PI0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PI1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PI2, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PI3, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PI4, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PI5, DEFAULT, UP, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PI6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PI7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PJ0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PJ2, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(UART2_CTS_N_PJ5, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(UART2_RTS_N_PJ6, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PJ7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PK0, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PK1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PK2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PK3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PK4, DEFAULT, UP, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(SPDIF_OUT_PK5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(SPDIF_IN_PK6, DEFAULT, DOWN, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PK7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP1_FS_PN0, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP1_DIN_PN1, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP1_DOUT_PN2, I2S0, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP1_SCLK_PN3, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(USB_VBUS_EN0_PN4, USB, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), ++ PINCFG(USB_VBUS_EN1_PN5, USB, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), ++ PINCFG(HDMI_INT_PN7, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, NORMAL), ++ PINCFG(ULPI_DATA7_PO0, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(ULPI_DATA0_PO1, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(ULPI_DATA1_PO2, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(ULPI_DATA2_PO3, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(ULPI_DATA3_PO4, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(ULPI_DATA4_PO5, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(ULPI_DATA5_PO6, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(ULPI_DATA6_PO7, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP3_FS_PP0, I2S2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP3_DIN_PP1, I2S2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP3_DOUT_PP2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP3_SCLK_PP3, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP4_FS_PP4, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP4_DIN_PP5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP4_DOUT_PP6, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP4_SCLK_PP7, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_COL0_PQ0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_COL1_PQ1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_COL2_PQ2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_COL3_PQ3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_COL4_PQ4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_COL5_PQ5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_COL6_PQ6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_COL7_PQ7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW0_PR0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW1_PR1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW2_PR2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW3_PR3, KBC, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW4_PR4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW5_PR5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW6_PR6, KBC, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW7_PR7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW8_PS0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW9_PS1, UARTA, DOWN, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW10_PS2, UARTA, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW11_PS3, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW12_PS4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW13_PS5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW14_PS6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW15_PS7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW16_PT0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(KB_ROW17_PT1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(GEN2_I2C_SCL_PT5, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), ++ PINCFG(GEN2_I2C_SDA_PT6, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), ++ PINCFG(SDMMC4_CMD_PT7, SDMMC4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PU0, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PU1, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PU2, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PU3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PU4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PU5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PU6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PV0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PV1, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC3_CD_N_PV2, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC1_WP_N_PV3, SDMMC1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DDC_SCL_PV4, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL), ++ PINCFG(DDC_SDA_PV5, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL), ++ PINCFG(GPIO_W2_AUD_PW2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(GPIO_W3_AUD_PW3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP_MCLK1_PW4, EXTPERIPH1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(CLK2_OUT_PW5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(UART3_TXD_PW6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(UART3_RXD_PW7, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DVFS_PWM_PX0, CLDVFS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(GPIO_X1_AUD_PX1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(DVFS_CLK_PX2, CLDVFS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(GPIO_X3_AUD_PX3, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(GPIO_X4_AUD_PX4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(GPIO_X5_AUD_PX5, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(GPIO_X6_AUD_PX6, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(GPIO_X7_AUD_PX7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(ULPI_CLK_PY0, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(ULPI_DIR_PY1, SPI1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(ULPI_NXT_PY2, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(ULPI_STP_PY3, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC1_DAT3_PY4, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC1_DAT2_PY5, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC1_DAT1_PY6, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC1_DAT0_PY7, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC1_CLK_PZ0, SDMMC1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC1_CMD_PZ1, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PWR_I2C_SCL_PZ6, I2CPWR, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), ++ PINCFG(PWR_I2C_SDA_PZ7, I2CPWR, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), ++ PINCFG(SDMMC4_DAT0_PAA0, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC4_DAT1_PAA1, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC4_DAT2_PAA2, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC4_DAT3_PAA3, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC4_DAT4_PAA4, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC4_DAT5_PAA5, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC4_DAT6_PAA6, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC4_DAT7_PAA7, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(PBB0, VGP6, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(CAM_I2C_SCL_PBB1, RSVD3, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), ++ PINCFG(CAM_I2C_SDA_PBB2, RSVD3, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), ++ PINCFG(PBB3, VGP3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PBB4, VGP4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PBB5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PBB6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PBB7, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(CAM_MCLK_PCC0, VI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PCC1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PCC2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC4_CLK_PCC4, SDMMC4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(CLK2_REQ_PCC5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PEX_L0_RST_N_PDD1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PEX_L0_CLKREQ_N_PDD2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PEX_WAKE_N_PDD3, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PEX_L1_RST_N_PDD5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PEX_L1_CLKREQ_N_PDD6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(CLK3_OUT_PEE0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(CLK3_REQ_PEE1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(DAP_MCLK1_REQ_PEE2, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(HDMI_CEC_PEE3, CEC, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), ++ PINCFG(SDMMC3_CLK_LB_OUT_PEE4, SDMMC3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(SDMMC3_CLK_LB_IN_PEE5, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(DP_HPD_PFF0, DP, UP, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(USB_VBUS_EN2_PFF1, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), ++ PINCFG(PFF2, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), ++ PINCFG(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(PWR_INT_N, PMI, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(RESET_OUT_N, RESET_OUT_N, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++ PINCFG(OWR, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, NORMAL), ++ PINCFG(CLK_32K_IN, CLK, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), ++ PINCFG(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), ++}; ++ ++#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \ ++ { \ ++ .drvgrp = PMUX_DRVGRP_##_drvgrp, \ ++ .slwf = _slwf, \ ++ .slwr = _slwr, \ ++ .drvup = _drvup, \ ++ .drvdn = _drvdn, \ ++ .lpmd = PMUX_LPMD_##_lpmd, \ ++ .schmt = PMUX_SCHMT_##_schmt, \ ++ .hsm = PMUX_HSM_##_hsm, \ ++ } ++ ++static const struct pmux_drvgrp_config nyan_big_drvgrps[] = { ++}; ++ ++#endif /* PINMUX_CONFIG_NYAN_BIG_H */ +diff -ruN u-boot-2015.01-rc3/board/nvidia/venice2/as3722_init.h u-boot/board/nvidia/venice2/as3722_init.h +--- u-boot-2015.01-rc3/board/nvidia/venice2/as3722_init.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/nvidia/venice2/as3722_init.h 2015-01-01 17:34:32.453499973 +0100 +@@ -18,7 +18,7 @@ + #define AS3722_LDO6VOLTAGE_REG 0x16 /* VDD_SDMMC */ + #define AS3722_LDCONTROL_REG 0x4E + +-#ifdef CONFIG_TARGET_JETSON_TK1 ++#if defined(CONFIG_TARGET_JETSON_TK1) || defined(CONFIG_TARGET_NYAN_BIG) + #define AS3722_SD0VOLTAGE_DATA (0x3C00 | AS3722_SD0VOLTAGE_REG) + #else + #define AS3722_SD0VOLTAGE_DATA (0x2800 | AS3722_SD0VOLTAGE_REG) +diff -ruN u-boot-2015.01-rc3/board/nvidia/whistler/whistler.c u-boot/board/nvidia/whistler/whistler.c +--- u-boot-2015.01-rc3/board/nvidia/whistler/whistler.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/nvidia/whistler/whistler.c 2015-01-01 17:34:32.453499973 +0100 +@@ -6,6 +6,7 @@ + */ + + #include ++#include + #include + #include + #include +@@ -21,23 +22,26 @@ + */ + void pin_mux_mmc(void) + { ++ struct udevice *dev; + uchar val; + int ret; + + /* Turn on MAX8907B LDO12 to 2.8V for J40 power */ +- ret = i2c_set_bus_num(0); +- if (ret) +- printf("i2c_set_bus_num failed: %d\n", ret); ++ ret = i2c_get_chip_for_busnum(0, 0x3c, &dev); ++ if (ret) { ++ printf("%s: Cannot find MAX8907B I2C chip\n", __func__); ++ return; ++ } + val = 0x29; +- ret = i2c_write(0x3c, 0x46, 1, &val, 1); ++ ret = i2c_write(dev, 0x46, &val, 1); + if (ret) + printf("i2c_write 0 0x3c 0x46 failed: %d\n", ret); + val = 0x00; +- ret = i2c_write(0x3c, 0x45, 1, &val, 1); ++ ret = i2c_write(dev, 0x45, &val, 1); + if (ret) + printf("i2c_write 0 0x3c 0x45 failed: %d\n", ret); + val = 0x1f; +- ret = i2c_write(0x3c, 0x44, 1, &val, 1); ++ ret = i2c_write(dev, 0x44, &val, 1); + if (ret) + printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret); + +@@ -49,6 +53,7 @@ + /* this is a weak define that we are overriding */ + void pin_mux_usb(void) + { ++ struct udevice *dev; + uchar val; + int ret; + +@@ -59,15 +64,17 @@ + */ + + /* Turn on TAC6416's GPIO 0+1 for USB1/3's VBUS */ +- ret = i2c_set_bus_num(0); +- if (ret) +- printf("i2c_set_bus_num failed: %d\n", ret); ++ ret = i2c_get_chip_for_busnum(0, 0x20, &dev); ++ if (ret) { ++ printf("%s: Cannot find TAC6416 I2C chip\n", __func__); ++ return; ++ } + val = 0x03; +- ret = i2c_write(0x20, 2, 1, &val, 1); ++ ret = i2c_write(dev, 2, &val, 1); + if (ret) + printf("i2c_write 0 0x20 2 failed: %d\n", ret); + val = 0xfc; +- ret = i2c_write(0x20, 6, 1, &val, 1); ++ ret = i2c_write(dev, 6, &val, 1); + if (ret) + printf("i2c_write 0 0x20 6 failed: %d\n", ret); + } +diff -ruN u-boot-2015.01-rc3/board/raspberrypi/rpi/rpi.c u-boot/board/raspberrypi/rpi/rpi.c +--- u-boot-2015.01-rc3/board/raspberrypi/rpi/rpi.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/raspberrypi/rpi/rpi.c 2015-01-01 17:34:32.469499711 +0100 +@@ -24,6 +24,7 @@ + #include + #include + #include ++#include + + DECLARE_GLOBAL_DATA_PTR; + +@@ -36,6 +37,17 @@ + .platdata = &gpio_platdata, + }; + ++static const struct pl01x_serial_platdata serial_platdata = { ++ .base = 0x20201000, ++ .type = TYPE_PL011, ++ .clock = 3000000, ++}; ++ ++U_BOOT_DEVICE(bcm2835_serials) = { ++ .name = "serial_pl01x", ++ .platdata = &serial_platdata, ++}; ++ + struct msg_get_arm_mem { + struct bcm2835_mbox_hdr hdr; + struct bcm2835_mbox_tag_get_arm_mem get_arm_mem; +@@ -70,58 +82,82 @@ + static const struct { + const char *name; + const char *fdtfile; ++ bool has_onboard_eth; + } models[] = { ++ [0] = { ++ "Unknown model", ++ "bcm2835-rpi-other.dtb", ++ false, ++ }, + [BCM2835_BOARD_REV_B_I2C0_2] = { + "Model B (no P5)", + "bcm2835-rpi-b-i2c0.dtb", ++ true, + }, + [BCM2835_BOARD_REV_B_I2C0_3] = { + "Model B (no P5)", + "bcm2835-rpi-b-i2c0.dtb", ++ true, + }, + [BCM2835_BOARD_REV_B_I2C1_4] = { + "Model B", + "bcm2835-rpi-b.dtb", ++ true, + }, + [BCM2835_BOARD_REV_B_I2C1_5] = { + "Model B", + "bcm2835-rpi-b.dtb", ++ true, + }, + [BCM2835_BOARD_REV_B_I2C1_6] = { + "Model B", + "bcm2835-rpi-b.dtb", ++ true, + }, + [BCM2835_BOARD_REV_A_7] = { + "Model A", + "bcm2835-rpi-a.dtb", ++ false, + }, + [BCM2835_BOARD_REV_A_8] = { + "Model A", + "bcm2835-rpi-a.dtb", ++ false, + }, + [BCM2835_BOARD_REV_A_9] = { + "Model A", + "bcm2835-rpi-a.dtb", ++ false, + }, + [BCM2835_BOARD_REV_B_REV2_d] = { + "Model B rev2", + "bcm2835-rpi-b-rev2.dtb", ++ true, + }, + [BCM2835_BOARD_REV_B_REV2_e] = { + "Model B rev2", + "bcm2835-rpi-b-rev2.dtb", ++ true, + }, + [BCM2835_BOARD_REV_B_REV2_f] = { + "Model B rev2", + "bcm2835-rpi-b-rev2.dtb", ++ true, + }, + [BCM2835_BOARD_REV_B_PLUS] = { + "Model B+", + "bcm2835-rpi-b-plus.dtb", ++ true, + }, + [BCM2835_BOARD_REV_CM] = { + "Compute Module", + "bcm2835-rpi-cm.dtb", ++ false, ++ }, ++ [BCM2835_BOARD_REV_A_PLUS] = { ++ "Model A+", ++ "bcm2835-rpi-a-plus.dtb", ++ false, + }, + }; + +@@ -154,9 +190,6 @@ + return; + + fdtfile = models[rpi_board_rev].fdtfile; +- if (!fdtfile) +- fdtfile = "bcm2835-rpi-other.dtb"; +- + setenv("fdtfile", fdtfile); + } + +@@ -165,6 +198,9 @@ + ALLOC_ALIGN_BUFFER(struct msg_get_mac_address, msg, 1, 16); + int ret; + ++ if (!models[rpi_board_rev].has_onboard_eth) ++ return; ++ + if (getenv("usbethaddr")) + return; + +@@ -231,12 +267,17 @@ + } + + rpi_board_rev = msg->get_board_rev.body.resp.rev; +- if (rpi_board_rev >= ARRAY_SIZE(models)) ++ if (rpi_board_rev >= ARRAY_SIZE(models)) { ++ printf("RPI: Board rev %u outside known range\n", ++ rpi_board_rev); + rpi_board_rev = 0; ++ } ++ if (!models[rpi_board_rev].name) { ++ printf("RPI: Board rev %u unknown\n", rpi_board_rev); ++ rpi_board_rev = 0; ++ } + + name = models[rpi_board_rev].name; +- if (!name) +- name = "Unknown model"; + printf("RPI model: %s\n", name); + } + +diff -ruN u-boot-2015.01-rc3/board/renesas/alt/alt.c u-boot/board/renesas/alt/alt.c +--- u-boot-2015.01-rc3/board/renesas/alt/alt.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/renesas/alt/alt.c 2015-01-01 17:34:32.473499645 +0100 +@@ -15,6 +15,8 @@ + #include + #include + #include ++#include ++#include + #include + #include + #include +@@ -37,30 +39,11 @@ + qos_init(); + } + +-#define MSTPSR1 0xE6150038 +-#define SMSTPCR1 0xE6150134 + #define TMU0_MSTP125 (1 << 25) +- +-#define MSTPSR7 0xE61501C4 +-#define SMSTPCR7 0xE615014C + #define SCIF2_MSTP719 (1 << 19) +- +-#define MSTPSR8 0xE61509A0 +-#define SMSTPCR8 0xE6150990 + #define ETHER_MSTP813 (1 << 13) +- +-#define MSTPSR3 0xE6150048 +-#define SMSTPCR3 0xE615013C + #define IIC1_MSTP323 (1 << 23) +- +-#define mstp_setbits(type, addr, saddr, set) \ +- out_##type((saddr), in_##type(addr) | (set)) +-#define mstp_clrbits(type, addr, saddr, clear) \ +- out_##type((saddr), in_##type(addr) & ~(clear)) +-#define mstp_setbits_le32(addr, saddr, set) \ +- mstp_setbits(le32, addr, saddr, set) +-#define mstp_clrbits_le32(addr, saddr, clear) \ +- mstp_clrbits(le32, addr, saddr, clear) ++#define MMC0_MSTP315 (1 << 15) + + int board_early_init_f(void) + { +@@ -76,15 +59,13 @@ + /* IIC1 / sh-i2c ch1 */ + mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323); + ++#ifdef CONFIG_SH_MMCIF ++ /* MMC */ ++ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315); ++#endif + return 0; + } + +-void arch_preboot_os(void) +-{ +- /* Disable TMU0 */ +- mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); +-} +- + int board_init(void) + { + /* adress of boot parameters */ +@@ -145,6 +126,19 @@ + #endif + } + ++int board_mmc_init(bd_t *bis) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_SH_MMCIF ++ gpio_request(GPIO_GP_4_31, NULL); ++ gpio_set_value(GPIO_GP_4_31, 1); ++ ++ ret = mmcif_mmc_init(); ++#endif ++ return ret; ++} ++ + int dram_init(void) + { + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; +diff -ruN u-boot-2015.01-rc3/board/renesas/alt/Makefile u-boot/board/renesas/alt/Makefile +--- u-boot-2015.01-rc3/board/renesas/alt/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/renesas/alt/Makefile 2015-01-01 17:34:32.473499645 +0100 +@@ -6,4 +6,4 @@ + # SPDX-License-Identifier: GPL-2.0 + # + +-obj-y := alt.o qos.o ++obj-y := alt.o qos.o ../rcar-gen2-common/common.o +diff -ruN u-boot-2015.01-rc3/board/renesas/gose/gose.c u-boot/board/renesas/gose/gose.c +--- u-boot-2015.01-rc3/board/renesas/gose/gose.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/renesas/gose/gose.c 2015-01-01 17:34:32.473499645 +0100 +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -41,27 +42,10 @@ + qos_init(); + } + +-#define MSTPSR1 0xE6150038 +-#define SMSTPCR1 0xE6150134 + #define TMU0_MSTP125 (1 << 25) +- +-#define MSTPSR7 0xE61501C4 +-#define SMSTPCR7 0xE615014C + #define SCIF0_MSTP721 (1 << 21) +- +-#define MSTPSR8 0xE61509A0 +-#define SMSTPCR8 0xE6150990 + #define ETHER_MSTP813 (1 << 13) + +-#define mstp_setbits(type, addr, saddr, set) \ +- out_##type((saddr), in_##type(addr) | (set)) +-#define mstp_clrbits(type, addr, saddr, clear) \ +- out_##type((saddr), in_##type(addr) & ~(clear)) +-#define mstp_setbits_le32(addr, saddr, set) \ +- mstp_setbits(le32, addr, saddr, set) +-#define mstp_clrbits_le32(addr, saddr, clear) \ +- mstp_clrbits(le32, addr, saddr, clear) +- + int board_early_init_f(void) + { + /* TMU0 */ +@@ -76,16 +60,6 @@ + return 0; + } + +-#define TSTR0 0x04 +-#define TSTR0_STR0 0x01 +-void arch_preboot_os(void) +-{ +- /* stop TMU0 */ +- mstp_clrbits_le32(TMU_BASE + TSTR0, TMU_BASE + TSTR0, TSTR0_STR0); +- /* Disable TMU0 */ +- mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); +-} +- + #define PUPR5 0xE6060114 + #define PUPR5_ETH 0x3FFC0000 + #define PUPR5_ETH_MAGIC (1 << 27) +diff -ruN u-boot-2015.01-rc3/board/renesas/gose/Makefile u-boot/board/renesas/gose/Makefile +--- u-boot-2015.01-rc3/board/renesas/gose/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/renesas/gose/Makefile 2015-01-01 17:34:32.473499645 +0100 +@@ -6,4 +6,4 @@ + # SPDX-License-Identifier: GPL-2.0 + # + +-obj-y := gose.o qos.o ++obj-y := gose.o qos.o ../rcar-gen2-common/common.o +diff -ruN u-boot-2015.01-rc3/board/renesas/koelsch/koelsch.c u-boot/board/renesas/koelsch/koelsch.c +--- u-boot-2015.01-rc3/board/renesas/koelsch/koelsch.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/renesas/koelsch/koelsch.c 2015-01-01 17:34:32.473499645 +0100 +@@ -16,6 +16,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -43,27 +44,10 @@ + qos_init(); + } + +-#define MSTPSR1 0xE6150038 +-#define SMSTPCR1 0xE6150134 + #define TMU0_MSTP125 (1 << 25) +- +-#define MSTPSR7 0xE61501C4 +-#define SMSTPCR7 0xE615014C + #define SCIF0_MSTP721 (1 << 21) +- +-#define MSTPSR8 0xE61509A0 +-#define SMSTPCR8 0xE6150990 + #define ETHER_MSTP813 (1 << 13) + +-#define mstp_setbits(type, addr, saddr, set) \ +- out_##type((saddr), in_##type(addr) | (set)) +-#define mstp_clrbits(type, addr, saddr, clear) \ +- out_##type((saddr), in_##type(addr) & ~(clear)) +-#define mstp_setbits_le32(addr, saddr, set) \ +- mstp_setbits(le32, addr, saddr, set) +-#define mstp_clrbits_le32(addr, saddr, clear) \ +- mstp_clrbits(le32, addr, saddr, clear) +- + int board_early_init_f(void) + { + mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); +@@ -77,12 +61,6 @@ + return 0; + } + +-void arch_preboot_os(void) +-{ +- /* Disable TMU0 */ +- mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); +-} +- + /* LSI pin pull-up control */ + #define PUPR5 0xe6060114 + #define PUPR5_ETH 0x3FFC0000 +diff -ruN u-boot-2015.01-rc3/board/renesas/koelsch/Makefile u-boot/board/renesas/koelsch/Makefile +--- u-boot-2015.01-rc3/board/renesas/koelsch/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/renesas/koelsch/Makefile 2015-01-01 17:34:32.473499645 +0100 +@@ -6,4 +6,4 @@ + # SPDX-License-Identifier: GPL-2.0 + # + +-obj-y := koelsch.o qos.o ++obj-y := koelsch.o qos.o ../rcar-gen2-common/common.o +diff -ruN u-boot-2015.01-rc3/board/renesas/lager/lager.c u-boot/board/renesas/lager/lager.c +--- u-boot-2015.01-rc3/board/renesas/lager/lager.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/renesas/lager/lager.c 2015-01-01 17:34:32.473499645 +0100 +@@ -18,8 +18,11 @@ + #include + #include + #include ++#include ++#include + #include + #include ++#include + #include "qos.h" + + DECLARE_GLOBAL_DATA_PTR; +@@ -50,26 +53,10 @@ + qos_init(); + } + +-#define MSTPSR1 0xE6150038 +-#define SMSTPCR1 0xE6150134 + #define TMU0_MSTP125 (1 << 25) +- +-#define MSTPSR7 0xE61501C4 +-#define SMSTPCR7 0xE615014C + #define SCIF0_MSTP721 (1 << 21) +- +-#define MSTPSR8 0xE61509A0 +-#define SMSTPCR8 0xE6150990 + #define ETHER_MSTP813 (1 << 13) +- +-#define mstp_setbits(type, addr, saddr, set) \ +- out_##type((saddr), in_##type(addr) | (set)) +-#define mstp_clrbits(type, addr, saddr, clear) \ +- out_##type((saddr), in_##type(addr) & ~(clear)) +-#define mstp_setbits_le32(addr, saddr, set) \ +- mstp_setbits(le32, addr, saddr, set) +-#define mstp_clrbits_le32(addr, saddr, clear) \ +- mstp_clrbits(le32, addr, saddr, clear) ++#define MMC1_MSTP305 (1 << 5) + + int board_early_init_f(void) + { +@@ -79,16 +66,12 @@ + mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721); + /* ETHER */ + mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813); ++ /* eMMC */ ++ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC1_MSTP305); + + return 0; + } + +-void arch_preboot_os(void) +-{ +- /* Disable TMU0 */ +- mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); +-} +- + DECLARE_GLOBAL_DATA_PTR; + int board_init(void) + { +@@ -163,6 +146,28 @@ + return 0; + } + ++int board_mmc_init(bd_t *bis) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_SH_MMCIF ++ gpio_request(GPIO_FN_MMC1_D0, NULL); ++ gpio_request(GPIO_FN_MMC1_D1, NULL); ++ gpio_request(GPIO_FN_MMC1_D2, NULL); ++ gpio_request(GPIO_FN_MMC1_D3, NULL); ++ gpio_request(GPIO_FN_MMC1_D4, NULL); ++ gpio_request(GPIO_FN_MMC1_D5, NULL); ++ gpio_request(GPIO_FN_MMC1_D6, NULL); ++ gpio_request(GPIO_FN_MMC1_D7, NULL); ++ gpio_request(GPIO_FN_MMC1_CLK, NULL); ++ gpio_request(GPIO_FN_MMC1_CMD, NULL); ++ ++ ret = mmcif_mmc_init(); ++#endif ++ return ret; ++} ++ ++ + int dram_init(void) + { + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; +diff -ruN u-boot-2015.01-rc3/board/renesas/lager/Makefile u-boot/board/renesas/lager/Makefile +--- u-boot-2015.01-rc3/board/renesas/lager/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/renesas/lager/Makefile 2015-01-01 17:34:32.473499645 +0100 +@@ -6,4 +6,4 @@ + # SPDX-License-Identifier: GPL-2.0 + # + +-obj-y := lager.o qos.o ++obj-y := lager.o qos.o ../rcar-gen2-common/common.o +diff -ruN u-boot-2015.01-rc3/board/renesas/rcar-gen2-common/common.c u-boot/board/renesas/rcar-gen2-common/common.c +--- u-boot-2015.01-rc3/board/renesas/rcar-gen2-common/common.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/renesas/rcar-gen2-common/common.c 2015-01-01 17:34:32.477499579 +0100 +@@ -0,0 +1,59 @@ ++/* ++ * board/renesas/rcar-gen2-common/common.c ++ * ++ * Copyright (C) 2013 Renesas Electronics Corporation ++ * Copyright (C) 2013 Nobuhiro Iwamatsu ++ * ++ * SPDX-License-Identifier: GPL-2.0 ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#define TSTR0 0x04 ++#define TSTR0_STR0 0x01 ++ ++static struct mstp_ctl mstptbl[] = { ++ { SMSTPCR0, MSTP0_BITS, CONFIG_SMSTP0_ENA, ++ RMSTPCR0, MSTP0_BITS, CONFIG_RMSTP0_ENA }, ++ { SMSTPCR1, MSTP1_BITS, CONFIG_SMSTP1_ENA, ++ RMSTPCR1, MSTP1_BITS, CONFIG_RMSTP1_ENA }, ++ { SMSTPCR2, MSTP2_BITS, CONFIG_SMSTP2_ENA, ++ RMSTPCR2, MSTP2_BITS, CONFIG_RMSTP2_ENA }, ++ { SMSTPCR3, MSTP3_BITS, CONFIG_SMSTP3_ENA, ++ RMSTPCR3, MSTP3_BITS, CONFIG_RMSTP3_ENA }, ++ { SMSTPCR4, MSTP4_BITS, CONFIG_SMSTP4_ENA, ++ RMSTPCR4, MSTP4_BITS, CONFIG_RMSTP4_ENA }, ++ { SMSTPCR5, MSTP5_BITS, CONFIG_SMSTP5_ENA, ++ RMSTPCR5, MSTP5_BITS, CONFIG_RMSTP5_ENA }, ++ /* No MSTP6 */ ++ { SMSTPCR7, MSTP7_BITS, CONFIG_SMSTP7_ENA, ++ RMSTPCR7, MSTP7_BITS, CONFIG_RMSTP7_ENA }, ++ { SMSTPCR8, MSTP8_BITS, CONFIG_SMSTP8_ENA, ++ RMSTPCR8, MSTP8_BITS, CONFIG_RMSTP8_ENA }, ++ { SMSTPCR9, MSTP9_BITS, CONFIG_SMSTP9_ENA, ++ RMSTPCR9, MSTP9_BITS, CONFIG_RMSTP9_ENA }, ++ { SMSTPCR10, MSTP10_BITS, CONFIG_SMSTP10_ENA, ++ RMSTPCR10, MSTP10_BITS, CONFIG_RMSTP10_ENA }, ++ { SMSTPCR11, MSTP11_BITS, CONFIG_SMSTP1_ENA, ++ RMSTPCR11, MSTP11_BITS, CONFIG_RMSTP11_ENA }, ++}; ++ ++void arch_preboot_os(void) ++{ ++ int i; ++ ++ /* stop TMU0 */ ++ mstp_clrbits_le32(TMU_BASE + TSTR0, TMU_BASE + TSTR0, TSTR0_STR0); ++ ++ /* Stop module clock */ ++ for (i = 0; i < ARRAY_SIZE(mstptbl); i++) { ++ mstp_setclrbits_le32(mstptbl[i].s_addr, mstptbl[i].s_dis, ++ mstptbl[i].s_ena); ++ mstp_setclrbits_le32(mstptbl[i].r_addr, mstptbl[i].r_dis, ++ mstptbl[i].r_ena); ++ } ++} +diff -ruN u-boot-2015.01-rc3/board/solidrun/hummingboard/hummingboard.c u-boot/board/solidrun/hummingboard/hummingboard.c +--- u-boot-2015.01-rc3/board/solidrun/hummingboard/hummingboard.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/solidrun/hummingboard/hummingboard.c 2015-01-01 17:34:32.497499251 +0100 +@@ -146,7 +146,7 @@ + { + struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; + +- int ret = enable_fec_anatop_clock(ENET_25MHz); ++ int ret = enable_fec_anatop_clock(ENET_25MHZ); + if (ret) + return ret; + +diff -ruN u-boot-2015.01-rc3/board/st/stv0991/Kconfig u-boot/board/st/stv0991/Kconfig +--- u-boot-2015.01-rc3/board/st/stv0991/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/st/stv0991/Kconfig 2015-01-01 17:34:32.501499185 +0100 +@@ -0,0 +1,23 @@ ++if TARGET_STV0991 ++ ++config SYS_CPU ++ string ++ default "armv7" ++ ++config SYS_BOARD ++ string ++ default "stv0991" ++ ++config SYS_VENDOR ++ string ++ default "st" ++ ++config SYS_SOC ++ string ++ default "stv0991" ++ ++config SYS_CONFIG_NAME ++ string ++ default "stv0991" ++ ++endif +diff -ruN u-boot-2015.01-rc3/board/st/stv0991/MAINTAINERS u-boot/board/st/stv0991/MAINTAINERS +--- u-boot-2015.01-rc3/board/st/stv0991/MAINTAINERS 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/st/stv0991/MAINTAINERS 2015-01-01 17:34:32.501499185 +0100 +@@ -0,0 +1,5 @@ ++STV0991 APPLICATION BOARD ++M: Vikas Manocha ++S: Maintained ++F: board/st/stv0991/ ++F: include/configs/stv0991.h +diff -ruN u-boot-2015.01-rc3/board/st/stv0991/Makefile u-boot/board/st/stv0991/Makefile +--- u-boot-2015.01-rc3/board/st/stv0991/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/st/stv0991/Makefile 2015-01-01 17:34:32.501499185 +0100 +@@ -0,0 +1,8 @@ ++# ++# (C) Copyright 2014 ++# Vikas Manocha, ST Microelectronics, vikas.manocha@stcom ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++obj-y := stv0991.o +diff -ruN u-boot-2015.01-rc3/board/st/stv0991/stv0991.c u-boot/board/st/stv0991/stv0991.c +--- u-boot-2015.01-rc3/board/st/stv0991/stv0991.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/board/st/stv0991/stv0991.c 2015-01-01 17:34:32.501499185 +0100 +@@ -0,0 +1,104 @@ ++/* ++ * (C) Copyright 2014 ++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++struct gpio_regs *const gpioa_regs = ++ (struct gpio_regs *) GPIOA_BASE_ADDR; ++ ++static const struct pl01x_serial_platdata serial_platdata = { ++ .base = 0x80406000, ++ .type = TYPE_PL011, ++ .clock = 2700 * 1000, ++}; ++ ++U_BOOT_DEVICE(stv09911_serials) = { ++ .name = "serial_pl01x", ++ .platdata = &serial_platdata, ++}; ++ ++#ifdef CONFIG_SHOW_BOOT_PROGRESS ++void show_boot_progress(int progress) ++{ ++ printf("%i\n", progress); ++} ++#endif ++ ++void enable_eth_phy(void) ++{ ++ /* Set GPIOA_06 pad HIGH (Appli board)*/ ++ writel(readl(&gpioa_regs->dir) | 0x40, &gpioa_regs->dir); ++ writel(readl(&gpioa_regs->data) | 0x40, &gpioa_regs->data); ++} ++int board_eth_enable(void) ++{ ++ stv0991_pinmux_config(ETH_GPIOB_10_31_C_0_4); ++ clock_setup(ETH_CLOCK_CFG); ++ enable_eth_phy(); ++ return 0; ++} ++ ++/* ++ * Miscellaneous platform dependent initialisations ++ */ ++int board_init(void) ++{ ++ board_eth_enable(); ++ return 0; ++} ++ ++int board_uart_init(void) ++{ ++ stv0991_pinmux_config(UART_GPIOC_30_31); ++ clock_setup(UART_CLOCK_CFG); ++ return 0; ++} ++ ++#ifdef CONFIG_BOARD_EARLY_INIT_F ++int board_early_init_f(void) ++{ ++ board_uart_init(); ++ return 0; ++} ++#endif ++ ++int dram_init(void) ++{ ++ gd->ram_size = PHYS_SDRAM_1_SIZE; ++ return 0; ++} ++ ++void dram_init_banksize(void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++} ++ ++#ifdef CONFIG_CMD_NET ++int board_eth_init(bd_t *bis) ++{ ++ int ret = 0; ++ ++#if defined(CONFIG_DESIGNWARE_ETH) ++ u32 interface = PHY_INTERFACE_MODE_MII; ++ if (designware_initialize(GMAC_BASE_ADDR, interface) >= 0) ++ ret++; ++#endif ++ return ret; ++} ++#endif +diff -ruN u-boot-2015.01-rc3/board/tbs/tbs2910/Kconfig u-boot/board/tbs/tbs2910/Kconfig +--- u-boot-2015.01-rc3/board/tbs/tbs2910/Kconfig 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/tbs/tbs2910/Kconfig 2015-01-01 17:34:32.505499121 +0100 +@@ -1,23 +1,15 @@ + if TARGET_TBS2910 + +-config SYS_CPU +- string +- default "armv7" +- + config SYS_BOARD +- string + default "tbs2910" + + config SYS_VENDOR +- string + default "tbs" + + config SYS_SOC +- string + default "mx6" + + config SYS_CONFIG_NAME +- string + default "tbs2910" + + endif +diff -ruN u-boot-2015.01-rc3/board/toradex/apalis_t30/apalis_t30.c u-boot/board/toradex/apalis_t30/apalis_t30.c +--- u-boot-2015.01-rc3/board/toradex/apalis_t30/apalis_t30.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/board/toradex/apalis_t30/apalis_t30.c 2015-01-01 17:34:32.509499055 +0100 +@@ -6,7 +6,7 @@ + */ + + #include +- ++#include + #include + #include + #include +@@ -38,23 +38,20 @@ + #ifdef CONFIG_PCI_TEGRA + int tegra_pcie_board_init(void) + { +- unsigned int old_bus; ++ struct udevice *dev; + u8 addr, data[1]; + int err; + +- old_bus = i2c_get_bus_num(); +- +- err = i2c_set_bus_num(0); ++ err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev); + if (err) { +- debug("failed to set I2C bus\n"); ++ debug("%s: Cannot find PMIC I2C chip\n", __func__); + return err; + } +- + /* TPS659110: VDD2_OP_REG = 1.05V */ + data[0] = 0x27; + addr = 0x25; + +- err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1); ++ err = i2c_write(dev, addr, data, 1); + if (err) { + debug("failed to set VDD supply\n"); + return err; +@@ -64,7 +61,7 @@ + data[0] = 0x0D; + addr = 0x24; + +- err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1); ++ err = i2c_write(dev, addr, data, 1); + if (err) { + debug("failed to enable VDD supply\n"); + return err; +@@ -74,14 +71,12 @@ + data[0] = 0x0D; + addr = 0x35; + +- err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1); ++ err = i2c_write(dev, addr, data, 1); + if (err) { + debug("failed to set AVDD supply\n"); + return err; + } + +- i2c_set_bus_num(old_bus); +- + return 0; + } + +diff -ruN u-boot-2015.01-rc3/common/board_f.c u-boot/common/board_f.c +--- u-boot-2015.01-rc3/common/board_f.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/common/board_f.c 2015-01-01 17:34:32.521498858 +0100 +@@ -813,7 +813,9 @@ + #endif + setup_mon_len, + setup_fdt, ++#ifdef CONFIG_TRACE + trace_early_init, ++#endif + initf_malloc, + #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) + /* TODO: can this go into arch_cpu_init()? */ +diff -ruN u-boot-2015.01-rc3/common/cmd_dfu.c u-boot/common/cmd_dfu.c +--- u-boot-2015.01-rc3/common/cmd_dfu.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/common/cmd_dfu.c 2015-01-01 17:34:32.525498793 +0100 +@@ -38,10 +38,10 @@ + + int controller_index = simple_strtoul(usb_controller, NULL, 0); + board_usb_init(controller_index, USB_INIT_DEVICE); +- dfu_clear_detach(); ++ g_dnl_clear_detach(); + g_dnl_register("usb_dnl_dfu"); + while (1) { +- if (dfu_detach()) { ++ if (g_dnl_detach()) { + /* + * Check if USB bus reset is performed after detach, + * which indicates that -R switch has been passed to +@@ -74,7 +74,7 @@ + if (dfu_reset) + run_command("reset", 0); + +- dfu_clear_detach(); ++ g_dnl_clear_detach(); + + return ret; + } +diff -ruN u-boot-2015.01-rc3/common/cmd_fastboot.c u-boot/common/cmd_fastboot.c +--- u-boot-2015.01-rc3/common/cmd_fastboot.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/common/cmd_fastboot.c 2015-01-01 17:34:32.525498793 +0100 +@@ -15,17 +15,21 @@ + { + int ret; + ++ g_dnl_clear_detach(); + ret = g_dnl_register("usb_dnl_fastboot"); + if (ret) + return ret; + + while (1) { ++ if (g_dnl_detach()) ++ break; + if (ctrlc()) + break; + usb_gadget_handle_interrupts(); + } + + g_dnl_unregister(); ++ g_dnl_clear_detach(); + return CMD_RET_SUCCESS; + } + +diff -ruN u-boot-2015.01-rc3/common/cmd_hash.c u-boot/common/cmd_hash.c +--- u-boot-2015.01-rc3/common/cmd_hash.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/common/cmd_hash.c 2015-01-01 17:34:32.529498727 +0100 +@@ -18,9 +18,9 @@ + static int do_hash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) + { + char *s; +-#ifdef CONFIG_HASH_VERIFY + int flags = HASH_FLAG_ENV; + ++#ifdef CONFIG_HASH_VERIFY + if (argc < 4) + return CMD_RET_USAGE; + if (!strcmp(argv[1], "-v")) { +@@ -28,8 +28,6 @@ + argc--; + argv++; + } +-#else +- const int flags = HASH_FLAG_ENV; + #endif + /* Move forward to 'algorithm' parameter */ + argc--; +@@ -40,19 +38,19 @@ + } + + #ifdef CONFIG_HASH_VERIFY +-U_BOOT_CMD( +- hash, 6, 1, do_hash, +- "compute hash message digest", +- "algorithm address count [[*]sum_dest]\n" +- " - compute message digest [save to env var / *address]\n" +- "hash -v algorithm address count [*]sum\n" +- " - verify hash of memory area with env var / *address" +-); ++#define HARGS 6 + #else ++#define HARGS 5 ++#endif ++ + U_BOOT_CMD( +- hash, 5, 1, do_hash, +- "compute message digest", +- "algorithm address count [[*]sum_dest]\n" ++ hash, HARGS, 1, do_hash, ++ "compute hash message digest", ++ "algorithm address count [[*]hash_dest]\n" + " - compute message digest [save to env var / *address]" +-); ++#ifdef CONFIG_HASH_VERIFY ++ "\nhash -v algorithm address count [*]hash\n" ++ " - verify message digest of memory area to immediate value, \n" ++ " env var or *address" + #endif ++); +diff -ruN u-boot-2015.01-rc3/common/cmd_i2c.c u-boot/common/cmd_i2c.c +--- u-boot-2015.01-rc3/common/cmd_i2c.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/common/cmd_i2c.c 2015-01-01 17:34:32.529498727 +0100 +@@ -69,8 +69,10 @@ + #include + #include + #include ++#include + #include + #include ++#include + #include + #include + #include +@@ -117,6 +119,60 @@ + + #define DISP_LINE_LEN 16 + ++/* ++ * Default for driver model is to use the chip's existing address length. ++ * For legacy code, this is not stored, so we need to use a suitable ++ * default. ++ */ ++#ifdef CONFIG_DM_I2C ++#define DEFAULT_ADDR_LEN (-1) ++#else ++#define DEFAULT_ADDR_LEN 1 ++#endif ++ ++#ifdef CONFIG_DM_I2C ++static struct udevice *i2c_cur_bus; ++ ++static int i2c_set_bus_num(unsigned int busnum) ++{ ++ struct udevice *bus; ++ int ret; ++ ++ ret = uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus); ++ if (ret) { ++ debug("%s: No bus %d\n", __func__, busnum); ++ return ret; ++ } ++ i2c_cur_bus = bus; ++ ++ return 0; ++} ++ ++static int i2c_get_cur_bus(struct udevice **busp) ++{ ++ if (!i2c_cur_bus) { ++ puts("No I2C bus selected\n"); ++ return -ENODEV; ++ } ++ *busp = i2c_cur_bus; ++ ++ return 0; ++} ++ ++static int i2c_get_cur_bus_chip(uint chip_addr, struct udevice **devp) ++{ ++ struct udevice *bus; ++ int ret; ++ ++ ret = i2c_get_cur_bus(&bus); ++ if (ret) ++ return ret; ++ ++ return i2c_get_chip(bus, chip_addr, devp); ++} ++ ++#endif ++ + /** + * i2c_init_board() - Board-specific I2C bus init + * +@@ -143,7 +199,7 @@ + * + * Returns I2C bus speed in Hz. + */ +-#if !defined(CONFIG_SYS_I2C) ++#if !defined(CONFIG_SYS_I2C) && !defined(CONFIG_DM_I2C) + /* + * TODO: Implement architecture-specific get/set functions + * Should go away, if we switched completely to new multibus support +@@ -182,12 +238,12 @@ + * + * Returns the address length. + */ +-static uint get_alen(char *arg) ++static uint get_alen(char *arg, int default_len) + { + int j; + int alen; + +- alen = 1; ++ alen = default_len; + for (j = 0; j < 8; j++) { + if (arg[j] == '.') { + alen = arg[j+1] - '0'; +@@ -227,8 +283,13 @@ + static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) + { + u_char chip; +- uint devaddr, alen, length; ++ uint devaddr, length; ++ int alen; + u_char *memaddr; ++ int ret; ++#ifdef CONFIG_DM_I2C ++ struct udevice *dev; ++#endif + + if (argc != 5) + return CMD_RET_USAGE; +@@ -243,7 +304,7 @@ + * 2 bytes long. Some day it might be 3 bytes long :-). + */ + devaddr = simple_strtoul(argv[2], NULL, 16); +- alen = get_alen(argv[2]); ++ alen = get_alen(argv[2], DEFAULT_ADDR_LEN); + if (alen > 3) + return CMD_RET_USAGE; + +@@ -257,18 +318,31 @@ + */ + memaddr = (u_char *)simple_strtoul(argv[4], NULL, 16); + +- if (i2c_read(chip, devaddr, alen, memaddr, length) != 0) { +- i2c_report_err(-1, I2C_ERR_READ); +- return 1; +- } ++#ifdef CONFIG_DM_I2C ++ ret = i2c_get_cur_bus_chip(chip, &dev); ++ if (!ret && alen != -1) ++ ret = i2c_set_chip_offset_len(dev, alen); ++ if (!ret) ++ ret = i2c_read(dev, devaddr, memaddr, length); ++#else ++ ret = i2c_read(chip, devaddr, alen, memaddr, length); ++#endif ++ if (ret) ++ return i2c_report_err(ret, I2C_ERR_READ); ++ + return 0; + } + + static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) + { + u_char chip; +- uint devaddr, alen, length; ++ uint devaddr, length; ++ int alen; + u_char *memaddr; ++ int ret; ++#ifdef CONFIG_DM_I2C ++ struct udevice *dev; ++#endif + + if (argc != 5) + return cmd_usage(cmdtp); +@@ -288,7 +362,7 @@ + * 2 bytes long. Some day it might be 3 bytes long :-). + */ + devaddr = simple_strtoul(argv[3], NULL, 16); +- alen = get_alen(argv[3]); ++ alen = get_alen(argv[3], DEFAULT_ADDR_LEN); + if (alen > 3) + return cmd_usage(cmdtp); + +@@ -297,10 +371,22 @@ + */ + length = simple_strtoul(argv[4], NULL, 16); + ++#ifdef CONFIG_DM_I2C ++ ret = i2c_get_cur_bus_chip(chip, &dev); ++ if (!ret && alen != -1) ++ ret = i2c_set_chip_offset_len(dev, alen); ++ if (ret) ++ return i2c_report_err(ret, I2C_ERR_WRITE); ++#endif ++ + while (length-- > 0) { +- if (i2c_write(chip, devaddr++, alen, memaddr++, 1) != 0) { +- return i2c_report_err(-1, I2C_ERR_WRITE); +- } ++#ifdef CONFIG_DM_I2C ++ ret = i2c_write(dev, devaddr++, memaddr++, 1); ++#else ++ ret = i2c_write(chip, devaddr++, alen, memaddr++, 1); ++#endif ++ if (ret) ++ return i2c_report_err(ret, I2C_ERR_WRITE); + /* + * No write delay with FRAM devices. + */ +@@ -311,6 +397,38 @@ + return 0; + } + ++#ifdef CONFIG_DM_I2C ++static int do_i2c_flags(cmd_tbl_t *cmdtp, int flag, int argc, ++ char *const argv[]) ++{ ++ struct udevice *dev; ++ uint flags; ++ int chip; ++ int ret; ++ ++ if (argc < 2) ++ return CMD_RET_USAGE; ++ ++ chip = simple_strtoul(argv[1], NULL, 16); ++ ret = i2c_get_cur_bus_chip(chip, &dev); ++ if (ret) ++ return i2c_report_err(ret, I2C_ERR_READ); ++ ++ if (argc > 2) { ++ flags = simple_strtoul(argv[2], NULL, 16); ++ ret = i2c_set_chip_flags(dev, flags); ++ } else { ++ ret = i2c_get_chip_flags(dev, &flags); ++ if (!ret) ++ printf("%x\n", flags); ++ } ++ if (ret) ++ return i2c_report_err(ret, I2C_ERR_READ); ++ ++ return 0; ++} ++#endif ++ + /** + * do_i2c_md() - Handle the "i2c md" command-line command + * @cmdtp: Command data struct pointer +@@ -327,8 +445,13 @@ + static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) + { + u_char chip; +- uint addr, alen, length; ++ uint addr, length; ++ int alen; + int j, nbytes, linebytes; ++ int ret; ++#ifdef CONFIG_DM_I2C ++ struct udevice *dev; ++#endif + + /* We use the last specified parameters, unless new ones are + * entered. +@@ -356,7 +479,7 @@ + * 2 bytes long. Some day it might be 3 bytes long :-). + */ + addr = simple_strtoul(argv[2], NULL, 16); +- alen = get_alen(argv[2]); ++ alen = get_alen(argv[2], DEFAULT_ADDR_LEN); + if (alen > 3) + return CMD_RET_USAGE; + +@@ -368,6 +491,14 @@ + length = simple_strtoul(argv[3], NULL, 16); + } + ++#ifdef CONFIG_DM_I2C ++ ret = i2c_get_cur_bus_chip(chip, &dev); ++ if (!ret && alen != -1) ++ ret = i2c_set_chip_offset_len(dev, alen); ++ if (ret) ++ return i2c_report_err(ret, I2C_ERR_READ); ++#endif ++ + /* + * Print the lines. + * +@@ -381,8 +512,13 @@ + + linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes; + +- if (i2c_read(chip, addr, alen, linebuf, linebytes) != 0) +- i2c_report_err(-1, I2C_ERR_READ); ++#ifdef CONFIG_DM_I2C ++ ret = i2c_read(dev, addr, linebuf, linebytes); ++#else ++ ret = i2c_read(chip, addr, alen, linebuf, linebytes); ++#endif ++ if (ret) ++ i2c_report_err(ret, I2C_ERR_READ); + else { + printf("%04x:", addr); + cp = linebuf; +@@ -429,9 +565,13 @@ + { + uchar chip; + ulong addr; +- uint alen; ++ int alen; + uchar byte; + int count; ++ int ret; ++#ifdef CONFIG_DM_I2C ++ struct udevice *dev; ++#endif + + if ((argc < 4) || (argc > 5)) + return CMD_RET_USAGE; +@@ -445,10 +585,17 @@ + * Address is always specified. + */ + addr = simple_strtoul(argv[2], NULL, 16); +- alen = get_alen(argv[2]); ++ alen = get_alen(argv[2], DEFAULT_ADDR_LEN); + if (alen > 3) + return CMD_RET_USAGE; + ++#ifdef CONFIG_DM_I2C ++ ret = i2c_get_cur_bus_chip(chip, &dev); ++ if (!ret && alen != -1) ++ ret = i2c_set_chip_offset_len(dev, alen); ++ if (ret) ++ return i2c_report_err(ret, I2C_ERR_WRITE); ++#endif + /* + * Value to write is always specified. + */ +@@ -463,8 +610,13 @@ + count = 1; + + while (count-- > 0) { +- if (i2c_write(chip, addr++, alen, &byte, 1) != 0) +- i2c_report_err(-1, I2C_ERR_WRITE); ++#ifdef CONFIG_DM_I2C ++ ret = i2c_write(dev, addr++, &byte, 1); ++#else ++ ret = i2c_write(chip, addr++, alen, &byte, 1); ++#endif ++ if (ret) ++ i2c_report_err(ret, I2C_ERR_WRITE); + /* + * Wait for the write to complete. The write can take + * up to 10mSec (we allow a little more time). +@@ -499,11 +651,15 @@ + { + uchar chip; + ulong addr; +- uint alen; ++ int alen; + int count; + uchar byte; + ulong crc; + ulong err; ++ int ret = 0; ++#ifdef CONFIG_DM_I2C ++ struct udevice *dev; ++#endif + + if (argc < 4) + return CMD_RET_USAGE; +@@ -517,10 +673,17 @@ + * Address is always specified. + */ + addr = simple_strtoul(argv[2], NULL, 16); +- alen = get_alen(argv[2]); ++ alen = get_alen(argv[2], DEFAULT_ADDR_LEN); + if (alen > 3) + return CMD_RET_USAGE; + ++#ifdef CONFIG_DM_I2C ++ ret = i2c_get_cur_bus_chip(chip, &dev); ++ if (!ret && alen != -1) ++ ret = i2c_set_chip_offset_len(dev, alen); ++ if (ret) ++ return i2c_report_err(ret, I2C_ERR_READ); ++#endif + /* + * Count is always specified + */ +@@ -534,13 +697,18 @@ + crc = 0; + err = 0; + while (count-- > 0) { +- if (i2c_read(chip, addr, alen, &byte, 1) != 0) ++#ifdef CONFIG_DM_I2C ++ ret = i2c_read(dev, addr, &byte, 1); ++#else ++ ret = i2c_read(chip, addr, alen, &byte, 1); ++#endif ++ if (ret) + err++; + crc = crc32 (crc, &byte, 1); + addr++; + } + if (err > 0) +- i2c_report_err(-1, I2C_ERR_READ); ++ i2c_report_err(ret, I2C_ERR_READ); + else + printf ("%08lx\n", crc); + +@@ -568,10 +736,14 @@ + { + uchar chip; + ulong addr; +- uint alen; ++ int alen; + ulong data; + int size = 1; + int nbytes; ++ int ret; ++#ifdef CONFIG_DM_I2C ++ struct udevice *dev; ++#endif + + if (argc != 3) + return CMD_RET_USAGE; +@@ -601,19 +773,32 @@ + * Address is always specified. + */ + addr = simple_strtoul(argv[2], NULL, 16); +- alen = get_alen(argv[2]); ++ alen = get_alen(argv[2], DEFAULT_ADDR_LEN); + if (alen > 3) + return CMD_RET_USAGE; + } + ++#ifdef CONFIG_DM_I2C ++ ret = i2c_get_cur_bus_chip(chip, &dev); ++ if (!ret && alen != -1) ++ ret = i2c_set_chip_offset_len(dev, alen); ++ if (ret) ++ return i2c_report_err(ret, I2C_ERR_WRITE); ++#endif ++ + /* + * Print the address, followed by value. Then accept input for + * the next value. A non-converted value exits. + */ + do { + printf("%08lx:", addr); +- if (i2c_read(chip, addr, alen, (uchar *)&data, size) != 0) +- i2c_report_err(-1, I2C_ERR_READ); ++#ifdef CONFIG_DM_I2C ++ ret = i2c_read(dev, addr, (uchar *)&data, size); ++#else ++ ret = i2c_read(chip, addr, alen, (uchar *)&data, size); ++#endif ++ if (ret) ++ i2c_report_err(ret, I2C_ERR_READ); + else { + data = cpu_to_be32(data); + if (size == 1) +@@ -655,8 +840,15 @@ + * good enough to not time out + */ + bootretry_reset_cmd_timeout(); +- if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0) +- i2c_report_err(-1, I2C_ERR_WRITE); ++#ifdef CONFIG_DM_I2C ++ ret = i2c_write(dev, addr, (uchar *)&data, ++ size); ++#else ++ ret = i2c_write(chip, addr, alen, ++ (uchar *)&data, size); ++#endif ++ if (ret) ++ i2c_report_err(ret, I2C_ERR_WRITE); + #ifdef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS + udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000); + #endif +@@ -697,6 +889,13 @@ + int k, skip; + unsigned int bus = GET_BUS_NUM; + #endif /* NOPROBES */ ++ int ret; ++#ifdef CONFIG_DM_I2C ++ struct udevice *bus, *dev; ++ ++ if (i2c_get_cur_bus(&bus)) ++ return CMD_RET_FAILURE; ++#endif + + if (argc == 2) + addr = simple_strtol(argv[1], 0, 16); +@@ -717,7 +916,12 @@ + if (skip) + continue; + #endif +- if (i2c_probe(j) == 0) { ++#ifdef CONFIG_DM_I2C ++ ret = i2c_probe(bus, j, 0, &dev); ++#else ++ ret = i2c_probe(j); ++#endif ++ if (ret == 0) { + printf(" %02X", j); + found++; + } +@@ -754,11 +958,15 @@ + static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) + { + u_char chip; +- ulong alen; ++ int alen; + uint addr; + uint length; + u_char bytes[16]; + int delay; ++ int ret; ++#ifdef CONFIG_DM_I2C ++ struct udevice *dev; ++#endif + + if (argc < 3) + return CMD_RET_USAGE; +@@ -772,9 +980,16 @@ + * Address is always specified. + */ + addr = simple_strtoul(argv[2], NULL, 16); +- alen = get_alen(argv[2]); ++ alen = get_alen(argv[2], DEFAULT_ADDR_LEN); + if (alen > 3) + return CMD_RET_USAGE; ++#ifdef CONFIG_DM_I2C ++ ret = i2c_get_cur_bus_chip(chip, &dev); ++ if (!ret && alen != -1) ++ ret = i2c_set_chip_offset_len(dev, alen); ++ if (ret) ++ return i2c_report_err(ret, I2C_ERR_WRITE); ++#endif + + /* + * Length is the number of objects, not number of bytes. +@@ -794,8 +1009,13 @@ + * Run the loop... + */ + while (1) { +- if (i2c_read(chip, addr, alen, bytes, length) != 0) +- i2c_report_err(-1, I2C_ERR_READ); ++#ifdef CONFIG_DM_I2C ++ ret = i2c_read(dev, addr, bytes, length); ++#else ++ ret = i2c_read(chip, addr, alen, bytes, length); ++#endif ++ if (ret) ++ i2c_report_err(ret, I2C_ERR_READ); + udelay(delay); + } + +@@ -1345,6 +1565,10 @@ + { + u_char chip; + struct edid1_info edid; ++ int ret; ++#ifdef CONFIG_DM_I2C ++ struct udevice *dev; ++#endif + + if (argc < 2) { + cmd_usage(cmdtp); +@@ -1352,10 +1576,15 @@ + } + + chip = simple_strtoul(argv[1], NULL, 16); +- if (i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid)) != 0) { +- i2c_report_err(-1, I2C_ERR_READ); +- return 1; +- } ++#ifdef CONFIG_DM_I2C ++ ret = i2c_get_cur_bus_chip(chip, &dev); ++ if (!ret) ++ ret = i2c_read(dev, 0, (uchar *)&edid, sizeof(edid)); ++#else ++ ret = i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid)); ++#endif ++ if (ret) ++ return i2c_report_err(ret, I2C_ERR_READ); + + if (edid_check_info(&edid)) { + puts("Content isn't valid EDID.\n"); +@@ -1437,17 +1666,28 @@ + * Returns zero on success, CMD_RET_USAGE in case of misuse and negative + * on error. + */ +-#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS) ++#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS) || \ ++ defined(CONFIG_DM_I2C) + static int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) + { + int ret = 0; +- unsigned int bus_no; ++ int bus_no; + +- if (argc == 1) ++ if (argc == 1) { + /* querying current setting */ +- printf("Current bus is %d\n", i2c_get_bus_num()); +- else { ++#ifdef CONFIG_DM_I2C ++ struct udevice *bus; ++ ++ if (!i2c_get_cur_bus(&bus)) ++ bus_no = bus->seq; ++ else ++ bus_no = -1; ++#else ++ bus_no = i2c_get_bus_num(); ++#endif ++ printf("Current bus is %d\n", bus_no); ++ } else { + bus_no = simple_strtoul(argv[1], NULL, 10); + #if defined(CONFIG_SYS_I2C) + if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) { +@@ -1478,13 +1718,28 @@ + { + int speed, ret=0; + +- if (argc == 1) ++#ifdef CONFIG_DM_I2C ++ struct udevice *bus; ++ ++ if (i2c_get_cur_bus(&bus)) ++ return 1; ++#endif ++ if (argc == 1) { ++#ifdef CONFIG_DM_I2C ++ speed = i2c_get_bus_speed(bus); ++#else ++ speed = i2c_get_bus_speed(); ++#endif + /* querying current speed */ +- printf("Current bus speed=%d\n", i2c_get_bus_speed()); +- else { ++ printf("Current bus speed=%d\n", speed); ++ } else { + speed = simple_strtoul(argv[1], NULL, 10); + printf("Setting bus speed to %d Hz\n", speed); ++#ifdef CONFIG_DM_I2C ++ ret = i2c_set_bus_speed(bus, speed); ++#else + ret = i2c_set_bus_speed(speed); ++#endif + if (ret) + printf("Failure changing bus speed (%d)\n", ret); + } +@@ -1532,7 +1787,16 @@ + */ + static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) + { +-#if defined(CONFIG_SYS_I2C) ++#if defined(CONFIG_DM_I2C) ++ struct udevice *bus; ++ ++ if (i2c_get_cur_bus(&bus)) ++ return CMD_RET_FAILURE; ++ if (i2c_deblock(bus)) { ++ printf("Error: Not supported by the driver\n"); ++ return CMD_RET_FAILURE; ++ } ++#elif defined(CONFIG_SYS_I2C) + i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr); + #else + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +@@ -1546,7 +1810,7 @@ + #endif + U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""), + #if defined(CONFIG_SYS_I2C) || \ +- defined(CONFIG_I2C_MULTI_BUS) ++ defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C) + U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""), + #endif /* CONFIG_I2C_MULTI_BUS */ + #if defined(CONFIG_I2C_EDID) +@@ -1560,6 +1824,9 @@ + U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""), + U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""), + U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""), ++#ifdef CONFIG_DM_I2C ++ U_BOOT_CMD_MKENT(flags, 2, 1, do_i2c_flags, "", ""), ++#endif + U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""), + #if defined(CONFIG_CMD_SDRAM) + U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""), +@@ -1610,7 +1877,7 @@ + #endif + "crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n" + #if defined(CONFIG_SYS_I2C) || \ +- defined(CONFIG_I2C_MULTI_BUS) ++ defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C) + "i2c dev [dev] - show or set current I2C bus\n" + #endif /* CONFIG_I2C_MULTI_BUS */ + #if defined(CONFIG_I2C_EDID) +@@ -1622,8 +1889,11 @@ + "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n" + "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n" + "i2c probe [address] - test for and show device(s) on the I2C bus\n" +- "i2c read chip address[.0, .1, .2] length memaddress - read to memory \n" ++ "i2c read chip address[.0, .1, .2] length memaddress - read to memory\n" + "i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n" ++#ifdef CONFIG_DM_I2C ++ "i2c flags chip [flags] - set or get chip flags\n" ++#endif + "i2c reset - re-init the I2C Controller\n" + #if defined(CONFIG_CMD_SDRAM) + "i2c sdram chip - print SDRAM configuration information\n" +diff -ruN u-boot-2015.01-rc3/common/cmd_mmc.c u-boot/common/cmd_mmc.c +--- u-boot-2015.01-rc3/common/cmd_mmc.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/common/cmd_mmc.c 2015-01-01 17:34:32.529498727 +0100 +@@ -90,7 +90,8 @@ + puts("Capacity: "); + print_size(mmc->capacity, "\n"); + +- printf("Bus Width: %d-bit\n", mmc->bus_width); ++ printf("Bus Width: %d-bit%s\n", mmc->bus_width, ++ mmc->ddr_mode ? " DDR" : ""); + } + static struct mmc *init_mmc_device(int dev, bool force_init) + { +diff -ruN u-boot-2015.01-rc3/common/fb_mmc.c u-boot/common/fb_mmc.c +--- u-boot-2015.01-rc3/common/fb_mmc.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/common/fb_mmc.c 2015-01-01 17:34:32.537498596 +0100 +@@ -4,12 +4,17 @@ + * SPDX-License-Identifier: GPL-2.0+ + */ + ++#include + #include + #include + #include + #include + #include + ++#ifndef CONFIG_FASTBOOT_GPT_NAME ++#define CONFIG_FASTBOOT_GPT_NAME GPT_ENTRY_NAME ++#endif ++ + /* The 64 defined bytes plus the '\0' */ + #define RESPONSE_LEN (64 + 1) + +@@ -62,7 +67,6 @@ + void fb_mmc_flash_write(const char *cmd, void *download_buffer, + unsigned int download_bytes, char *response) + { +- int ret; + block_dev_desc_t *dev_desc; + disk_partition_t info; + +@@ -76,8 +80,24 @@ + return; + } + +- ret = get_partition_info_efi_by_name(dev_desc, cmd, &info); +- if (ret) { ++ if (strcmp(cmd, CONFIG_FASTBOOT_GPT_NAME) == 0) { ++ printf("%s: updating MBR, Primary and Backup GPT(s)\n", ++ __func__); ++ if (is_valid_gpt_buf(dev_desc, download_buffer)) { ++ printf("%s: invalid GPT - refusing to write to flash\n", ++ __func__); ++ fastboot_fail("invalid GPT partition"); ++ return; ++ } ++ if (write_mbr_and_gpt_partitions(dev_desc, download_buffer)) { ++ printf("%s: writing GPT partitions failed\n", __func__); ++ fastboot_fail("writing GPT partitions failed"); ++ return; ++ } ++ printf("........ success\n"); ++ fastboot_okay(""); ++ return; ++ } else if (get_partition_info_efi_by_name(dev_desc, cmd, &info)) { + error("cannot find partition: '%s'\n", cmd); + fastboot_fail("cannot find partition"); + return; +diff -ruN u-boot-2015.01-rc3/common/hash.c u-boot/common/hash.c +--- u-boot-2015.01-rc3/common/hash.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/common/hash.c 2015-01-01 17:34:32.537498596 +0100 +@@ -256,7 +256,7 @@ + env_var = 1; + } + +- if (env_var) { ++ if (!env_var) { + ulong addr; + void *buf; + +@@ -347,7 +347,7 @@ + { + ulong addr, len; + +- if (argc < 2) ++ if ((argc < 2) || ((flags & HASH_FLAG_VERIFY) && (argc < 3))) + return CMD_RET_USAGE; + + addr = simple_strtoul(*argv++, NULL, 16); +@@ -380,8 +380,6 @@ + #else + if (0) { + #endif +- if (!argc) +- return CMD_RET_USAGE; + if (parse_verify_sum(algo, *argv, vsum, + flags & HASH_FLAG_ENV)) { + printf("ERROR: %s does not contain a valid " +diff -ruN u-boot-2015.01-rc3/configs/armadillo-800eva_defconfig u-boot/configs/armadillo-800eva_defconfig +--- u-boot-2015.01-rc3/configs/armadillo-800eva_defconfig 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/configs/armadillo-800eva_defconfig 2015-01-01 17:34:32.557498268 +0100 +@@ -1,3 +1,3 @@ + CONFIG_ARM=y +-+S:CONFIG_RMOBILE=y ++CONFIG_RMOBILE=y + CONFIG_TARGET_ARMADILLO_800EVA=y +diff -ruN u-boot-2015.01-rc3/configs/crownbay_defconfig u-boot/configs/crownbay_defconfig +--- u-boot-2015.01-rc3/configs/crownbay_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/configs/crownbay_defconfig 2015-01-01 17:34:32.561498202 +0100 +@@ -0,0 +1,6 @@ ++CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xfff00000" ++CONFIG_X86=y ++CONFIG_TARGET_CROWNBAY=y ++CONFIG_OF_CONTROL=y ++CONFIG_OF_SEPARATE=y ++CONFIG_DEFAULT_DEVICE_TREE="crownbay" +diff -ruN u-boot-2015.01-rc3/configs/kzm9g_defconfig u-boot/configs/kzm9g_defconfig +--- u-boot-2015.01-rc3/configs/kzm9g_defconfig 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/configs/kzm9g_defconfig 2015-01-01 17:34:32.561498202 +0100 +@@ -1,3 +1,3 @@ + CONFIG_ARM=y +-+S:CONFIG_RMOBILE=y ++CONFIG_RMOBILE=y + CONFIG_TARGET_KZM9G=y +diff -ruN u-boot-2015.01-rc3/configs/ls1021aqds_nand_defconfig u-boot/configs/ls1021aqds_nand_defconfig +--- u-boot-2015.01-rc3/configs/ls1021aqds_nand_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/configs/ls1021aqds_nand_defconfig 2015-01-01 17:34:32.561498202 +0100 +@@ -0,0 +1,4 @@ ++CONFIG_SPL=y ++CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT" +++S:CONFIG_ARM=y +++S:CONFIG_TARGET_LS1021AQDS=y +diff -ruN u-boot-2015.01-rc3/configs/ls1021aqds_qspi_defconfig u-boot/configs/ls1021aqds_qspi_defconfig +--- u-boot-2015.01-rc3/configs/ls1021aqds_qspi_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/configs/ls1021aqds_qspi_defconfig 2015-01-01 17:34:32.561498202 +0100 +@@ -0,0 +1,3 @@ ++CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" +++S:CONFIG_ARM=y +++S:CONFIG_TARGET_LS1021AQDS=y +diff -ruN u-boot-2015.01-rc3/configs/ls1021aqds_sdcard_defconfig u-boot/configs/ls1021aqds_sdcard_defconfig +--- u-boot-2015.01-rc3/configs/ls1021aqds_sdcard_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/configs/ls1021aqds_sdcard_defconfig 2015-01-01 17:34:32.565498136 +0100 +@@ -0,0 +1,4 @@ ++CONFIG_SPL=y ++CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" +++S:CONFIG_ARM=y +++S:CONFIG_TARGET_LS1021AQDS=y +diff -ruN u-boot-2015.01-rc3/configs/ls1021atwr_qspi_defconfig u-boot/configs/ls1021atwr_qspi_defconfig +--- u-boot-2015.01-rc3/configs/ls1021atwr_qspi_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/configs/ls1021atwr_qspi_defconfig 2015-01-01 17:34:32.565498136 +0100 +@@ -0,0 +1,3 @@ ++CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" +++S:CONFIG_ARM=y +++S:CONFIG_TARGET_LS1021ATWR=y +diff -ruN u-boot-2015.01-rc3/configs/ls1021atwr_sdcard_defconfig u-boot/configs/ls1021atwr_sdcard_defconfig +--- u-boot-2015.01-rc3/configs/ls1021atwr_sdcard_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/configs/ls1021atwr_sdcard_defconfig 2015-01-01 17:34:32.565498136 +0100 +@@ -0,0 +1,4 @@ ++CONFIG_SPL=y ++CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" +++S:CONFIG_ARM=y +++S:CONFIG_TARGET_LS1021ATWR=y +diff -ruN u-boot-2015.01-rc3/configs/nyan-big_defconfig u-boot/configs/nyan-big_defconfig +--- u-boot-2015.01-rc3/configs/nyan-big_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/configs/nyan-big_defconfig 2015-01-01 17:34:32.565498136 +0100 +@@ -0,0 +1,5 @@ +++S:CONFIG_ARM=y +++S:CONFIG_TEGRA=y +++S:CONFIG_TEGRA124=y +++S:CONFIG_TARGET_NYAN_BIG=y ++CONFIG_DEFAULT_DEVICE_TREE="tegra124-nyan-big" +diff -ruN u-boot-2015.01-rc3/configs/ph1_ld4_defconfig u-boot/configs/ph1_ld4_defconfig +--- u-boot-2015.01-rc3/configs/ph1_ld4_defconfig 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/configs/ph1_ld4_defconfig 2015-01-01 17:34:32.565498136 +0100 +@@ -1,4 +1,3 @@ +-CONFIG_SPL=y + CONFIG_FIT=y + CONFIG_FIT_VERBOSE=y + +S:CONFIG_ARM=y +diff -ruN u-boot-2015.01-rc3/configs/ph1_pro4_defconfig u-boot/configs/ph1_pro4_defconfig +--- u-boot-2015.01-rc3/configs/ph1_pro4_defconfig 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/configs/ph1_pro4_defconfig 2015-01-01 17:34:32.565498136 +0100 +@@ -1,4 +1,3 @@ +-CONFIG_SPL=y + CONFIG_FIT=y + CONFIG_FIT_VERBOSE=y + +S:CONFIG_ARM=y +diff -ruN u-boot-2015.01-rc3/configs/ph1_sld8_defconfig u-boot/configs/ph1_sld8_defconfig +--- u-boot-2015.01-rc3/configs/ph1_sld8_defconfig 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/configs/ph1_sld8_defconfig 2015-01-01 17:34:32.565498136 +0100 +@@ -1,4 +1,3 @@ +-CONFIG_SPL=y + CONFIG_FIT=y + CONFIG_FIT_VERBOSE=y + +S:CONFIG_ARM=y +diff -ruN u-boot-2015.01-rc3/configs/stv0991_defconfig u-boot/configs/stv0991_defconfig +--- u-boot-2015.01-rc3/configs/stv0991_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/configs/stv0991_defconfig 2015-01-01 17:34:32.569498072 +0100 +@@ -0,0 +1,3 @@ ++CONFIG_SYS_EXTRA_OPTIONS="stv0991" ++CONFIG_ARM=y ++CONFIG_TARGET_STV0991=y +diff -ruN u-boot-2015.01-rc3/disk/part_efi.c u-boot/disk/part_efi.c +--- u-boot-2015.01-rc3/disk/part_efi.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/disk/part_efi.c 2015-01-01 17:34:32.573498006 +0100 +@@ -69,6 +69,107 @@ + sizeof(efi_guid_t)); + } + ++static int validate_gpt_header(gpt_header *gpt_h, lbaint_t lba, ++ lbaint_t lastlba) ++{ ++ uint32_t crc32_backup = 0; ++ uint32_t calc_crc32; ++ ++ /* Check the GPT header signature */ ++ if (le64_to_cpu(gpt_h->signature) != GPT_HEADER_SIGNATURE) { ++ printf("%s signature is wrong: 0x%llX != 0x%llX\n", ++ "GUID Partition Table Header", ++ le64_to_cpu(gpt_h->signature), ++ GPT_HEADER_SIGNATURE); ++ return -1; ++ } ++ ++ /* Check the GUID Partition Table CRC */ ++ memcpy(&crc32_backup, &gpt_h->header_crc32, sizeof(crc32_backup)); ++ memset(&gpt_h->header_crc32, 0, sizeof(gpt_h->header_crc32)); ++ ++ calc_crc32 = efi_crc32((const unsigned char *)gpt_h, ++ le32_to_cpu(gpt_h->header_size)); ++ ++ memcpy(&gpt_h->header_crc32, &crc32_backup, sizeof(crc32_backup)); ++ ++ if (calc_crc32 != le32_to_cpu(crc32_backup)) { ++ printf("%s CRC is wrong: 0x%x != 0x%x\n", ++ "GUID Partition Table Header", ++ le32_to_cpu(crc32_backup), calc_crc32); ++ return -1; ++ } ++ ++ /* ++ * Check that the my_lba entry points to the LBA that contains the GPT ++ */ ++ if (le64_to_cpu(gpt_h->my_lba) != lba) { ++ printf("GPT: my_lba incorrect: %llX != " LBAF "\n", ++ le64_to_cpu(gpt_h->my_lba), ++ lba); ++ return -1; ++ } ++ ++ /* ++ * Check that the first_usable_lba and that the last_usable_lba are ++ * within the disk. ++ */ ++ if (le64_to_cpu(gpt_h->first_usable_lba) > lastlba) { ++ printf("GPT: first_usable_lba incorrect: %llX > " LBAF "\n", ++ le64_to_cpu(gpt_h->first_usable_lba), lastlba); ++ return -1; ++ } ++ if (le64_to_cpu(gpt_h->last_usable_lba) > lastlba) { ++ printf("GPT: last_usable_lba incorrect: %llX > " LBAF "\n", ++ le64_to_cpu(gpt_h->last_usable_lba), lastlba); ++ return -1; ++ } ++ ++ debug("GPT: first_usable_lba: %llX last_usable_lba: %llX last lba: " ++ LBAF "\n", le64_to_cpu(gpt_h->first_usable_lba), ++ le64_to_cpu(gpt_h->last_usable_lba), lastlba); ++ ++ return 0; ++} ++ ++static int validate_gpt_entries(gpt_header *gpt_h, gpt_entry *gpt_e) ++{ ++ uint32_t calc_crc32; ++ ++ /* Check the GUID Partition Table Entry Array CRC */ ++ calc_crc32 = efi_crc32((const unsigned char *)gpt_e, ++ le32_to_cpu(gpt_h->num_partition_entries) * ++ le32_to_cpu(gpt_h->sizeof_partition_entry)); ++ ++ if (calc_crc32 != le32_to_cpu(gpt_h->partition_entry_array_crc32)) { ++ printf("%s: 0x%x != 0x%x\n", ++ "GUID Partition Table Entry Array CRC is wrong", ++ le32_to_cpu(gpt_h->partition_entry_array_crc32), ++ calc_crc32); ++ return -1; ++ } ++ ++ return 0; ++} ++ ++static void prepare_backup_gpt_header(gpt_header *gpt_h) ++{ ++ uint32_t calc_crc32; ++ uint64_t val; ++ ++ /* recalculate the values for the Backup GPT Header */ ++ val = le64_to_cpu(gpt_h->my_lba); ++ gpt_h->my_lba = gpt_h->alternate_lba; ++ gpt_h->alternate_lba = cpu_to_le64(val); ++ gpt_h->partition_entry_lba = ++ cpu_to_le64(le64_to_cpu(gpt_h->last_usable_lba) + 1); ++ gpt_h->header_crc32 = 0; ++ ++ calc_crc32 = efi_crc32((const unsigned char *)gpt_h, ++ le32_to_cpu(gpt_h->header_size)); ++ gpt_h->header_crc32 = cpu_to_le32(calc_crc32); ++} ++ + #ifdef CONFIG_EFI_PARTITION + /* + * Public Functions (include/part.h) +@@ -259,7 +360,6 @@ + const int pte_blk_cnt = BLOCK_CNT((gpt_h->num_partition_entries + * sizeof(gpt_entry)), dev_desc); + u32 calc_crc32; +- u64 val; + + debug("max lba: %x\n", (u32) dev_desc->lba); + /* Setup the Protective MBR */ +@@ -284,15 +384,7 @@ + != pte_blk_cnt) + goto err; + +- /* recalculate the values for the Backup GPT Header */ +- val = le64_to_cpu(gpt_h->my_lba); +- gpt_h->my_lba = gpt_h->alternate_lba; +- gpt_h->alternate_lba = cpu_to_le64(val); +- gpt_h->header_crc32 = 0; +- +- calc_crc32 = efi_crc32((const unsigned char *)gpt_h, +- le32_to_cpu(gpt_h->header_size)); +- gpt_h->header_crc32 = cpu_to_le32(calc_crc32); ++ prepare_backup_gpt_header(gpt_h); + + if (dev_desc->block_write(dev_desc->dev, + (lbaint_t)le64_to_cpu(gpt_h->last_usable_lba) +@@ -455,6 +547,97 @@ + free(gpt_h); + return ret; + } ++ ++int is_valid_gpt_buf(block_dev_desc_t *dev_desc, void *buf) ++{ ++ gpt_header *gpt_h; ++ gpt_entry *gpt_e; ++ ++ /* determine start of GPT Header in the buffer */ ++ gpt_h = buf + (GPT_PRIMARY_PARTITION_TABLE_LBA * ++ dev_desc->blksz); ++ if (validate_gpt_header(gpt_h, GPT_PRIMARY_PARTITION_TABLE_LBA, ++ dev_desc->lba)) ++ return -1; ++ ++ /* determine start of GPT Entries in the buffer */ ++ gpt_e = buf + (le64_to_cpu(gpt_h->partition_entry_lba) * ++ dev_desc->blksz); ++ if (validate_gpt_entries(gpt_h, gpt_e)) ++ return -1; ++ ++ return 0; ++} ++ ++int write_mbr_and_gpt_partitions(block_dev_desc_t *dev_desc, void *buf) ++{ ++ gpt_header *gpt_h; ++ gpt_entry *gpt_e; ++ int gpt_e_blk_cnt; ++ lbaint_t lba; ++ int cnt; ++ ++ if (is_valid_gpt_buf(dev_desc, buf)) ++ return -1; ++ ++ /* determine start of GPT Header in the buffer */ ++ gpt_h = buf + (GPT_PRIMARY_PARTITION_TABLE_LBA * ++ dev_desc->blksz); ++ ++ /* determine start of GPT Entries in the buffer */ ++ gpt_e = buf + (le64_to_cpu(gpt_h->partition_entry_lba) * ++ dev_desc->blksz); ++ gpt_e_blk_cnt = BLOCK_CNT((le32_to_cpu(gpt_h->num_partition_entries) * ++ le32_to_cpu(gpt_h->sizeof_partition_entry)), ++ dev_desc); ++ ++ /* write MBR */ ++ lba = 0; /* MBR is always at 0 */ ++ cnt = 1; /* MBR (1 block) */ ++ if (dev_desc->block_write(dev_desc->dev, lba, cnt, buf) != cnt) { ++ printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n", ++ __func__, "MBR", cnt, lba); ++ return 1; ++ } ++ ++ /* write Primary GPT */ ++ lba = GPT_PRIMARY_PARTITION_TABLE_LBA; ++ cnt = 1; /* GPT Header (1 block) */ ++ if (dev_desc->block_write(dev_desc->dev, lba, cnt, gpt_h) != cnt) { ++ printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n", ++ __func__, "Primary GPT Header", cnt, lba); ++ return 1; ++ } ++ ++ lba = le64_to_cpu(gpt_h->partition_entry_lba); ++ cnt = gpt_e_blk_cnt; ++ if (dev_desc->block_write(dev_desc->dev, lba, cnt, gpt_e) != cnt) { ++ printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n", ++ __func__, "Primary GPT Entries", cnt, lba); ++ return 1; ++ } ++ ++ prepare_backup_gpt_header(gpt_h); ++ ++ /* write Backup GPT */ ++ lba = le64_to_cpu(gpt_h->partition_entry_lba); ++ cnt = gpt_e_blk_cnt; ++ if (dev_desc->block_write(dev_desc->dev, lba, cnt, gpt_e) != cnt) { ++ printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n", ++ __func__, "Backup GPT Entries", cnt, lba); ++ return 1; ++ } ++ ++ lba = le64_to_cpu(gpt_h->my_lba); ++ cnt = 1; /* GPT Header (1 block) */ ++ if (dev_desc->block_write(dev_desc->dev, lba, cnt, gpt_h) != cnt) { ++ printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n", ++ __func__, "Backup GPT Header", cnt, lba); ++ return 1; ++ } ++ ++ return 0; ++} + #endif + + /* +@@ -511,10 +694,6 @@ + static int is_gpt_valid(block_dev_desc_t *dev_desc, u64 lba, + gpt_header *pgpt_head, gpt_entry **pgpt_pte) + { +- u32 crc32_backup = 0; +- u32 calc_crc32; +- u64 lastlba; +- + if (!dev_desc || !pgpt_head) { + printf("%s: Invalid Argument(s)\n", __func__); + return 0; +@@ -527,55 +706,8 @@ + return 0; + } + +- /* Check the GPT header signature */ +- if (le64_to_cpu(pgpt_head->signature) != GPT_HEADER_SIGNATURE) { +- printf("GUID Partition Table Header signature is wrong:" +- "0x%llX != 0x%llX\n", +- le64_to_cpu(pgpt_head->signature), +- GPT_HEADER_SIGNATURE); +- return 0; +- } +- +- /* Check the GUID Partition Table CRC */ +- memcpy(&crc32_backup, &pgpt_head->header_crc32, sizeof(crc32_backup)); +- memset(&pgpt_head->header_crc32, 0, sizeof(pgpt_head->header_crc32)); +- +- calc_crc32 = efi_crc32((const unsigned char *)pgpt_head, +- le32_to_cpu(pgpt_head->header_size)); +- +- memcpy(&pgpt_head->header_crc32, &crc32_backup, sizeof(crc32_backup)); +- +- if (calc_crc32 != le32_to_cpu(crc32_backup)) { +- printf("GUID Partition Table Header CRC is wrong:" +- "0x%x != 0x%x\n", +- le32_to_cpu(crc32_backup), calc_crc32); +- return 0; +- } +- +- /* Check that the my_lba entry points to the LBA that contains the GPT */ +- if (le64_to_cpu(pgpt_head->my_lba) != lba) { +- printf("GPT: my_lba incorrect: %llX != %" PRIX64 "\n", +- le64_to_cpu(pgpt_head->my_lba), +- lba); ++ if (validate_gpt_header(pgpt_head, (lbaint_t)lba, dev_desc->lba)) + return 0; +- } +- +- /* Check the first_usable_lba and last_usable_lba are within the disk. */ +- lastlba = (u64)dev_desc->lba; +- if (le64_to_cpu(pgpt_head->first_usable_lba) > lastlba) { +- printf("GPT: first_usable_lba incorrect: %llX > %" PRIX64 "\n", +- le64_to_cpu(pgpt_head->first_usable_lba), lastlba); +- return 0; +- } +- if (le64_to_cpu(pgpt_head->last_usable_lba) > lastlba) { +- printf("GPT: last_usable_lba incorrect: %llX > %" PRIX64 "\n", +- le64_to_cpu(pgpt_head->last_usable_lba), lastlba); +- return 0; +- } +- +- debug("GPT: first_usable_lba: %llX last_usable_lba %llX last lba %" +- PRIX64 "\n", le64_to_cpu(pgpt_head->first_usable_lba), +- le64_to_cpu(pgpt_head->last_usable_lba), lastlba); + + /* Read and allocate Partition Table Entries */ + *pgpt_pte = alloc_read_gpt_entries(dev_desc, pgpt_head); +@@ -584,17 +716,7 @@ + return 0; + } + +- /* Check the GUID Partition Table Entry Array CRC */ +- calc_crc32 = efi_crc32((const unsigned char *)*pgpt_pte, +- le32_to_cpu(pgpt_head->num_partition_entries) * +- le32_to_cpu(pgpt_head->sizeof_partition_entry)); +- +- if (calc_crc32 != le32_to_cpu(pgpt_head->partition_entry_array_crc32)) { +- printf("GUID Partition Table Entry Array CRC is wrong:" +- "0x%x != 0x%x\n", +- le32_to_cpu(pgpt_head->partition_entry_array_crc32), +- calc_crc32); +- ++ if (validate_gpt_entries(pgpt_head, *pgpt_pte)) { + free(*pgpt_pte); + return 0; + } +diff -ruN u-boot-2015.01-rc3/doc/README.x86 u-boot/doc/README.x86 +--- u-boot-2015.01-rc3/doc/README.x86 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/doc/README.x86 2015-01-01 17:34:32.597497612 +0100 +@@ -0,0 +1,126 @@ ++# ++# Copyright (C) 2014, Simon Glass ++# Copyright (C) 2014, Bin Meng ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++U-Boot on x86 ++============= ++ ++This document describes the information about U-Boot running on x86 targets, ++including supported boards, build instructions, todo list, etc. ++ ++Status ++------ ++U-Boot supports running as a coreboot [1] payload on x86. So far only Link ++(Chromebook Pixel) has been tested, but it should work with minimal adjustments ++on other x86 boards since coreboot deals with most of the low-level details. ++ ++U-Boot also supports booting directly from x86 reset vector without coreboot, ++aka raw support or bare support. Currently Link and Intel Crown Bay board ++support running U-Boot 'bare metal'. ++ ++As for loading OS, U-Boot supports directly booting a 32-bit or 64-bit Linux ++kernel as part of a FIT image. It also supports a compressed zImage. ++ ++Build Instructions ++------------------ ++Building U-Boot as a coreboot payload is just like building U-Boot for targets ++on other architectures, like below: ++ ++$ make coreboot-x86_defconfig ++$ make all ++ ++Building ROM version of U-Boot (hereafter referred to as u-boot.rom) is a ++little bit tricky, as generally it requires several binary blobs which are not ++shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build is ++not turned on by default in the U-Boot source tree. Firstly, you need turn it ++on by uncommenting the following line in the main U-Boot Makefile: ++ ++# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom ++ ++Link-specific instructions: ++ ++First, you need the following binary blobs: ++ ++* descriptor.bin - Intel flash descriptor ++* me.bin - Intel Management Engine ++* mrc.bin - Memory Reference Code, which sets up SDRAM ++* video ROM - sets up the display ++ ++You can get these binary blobs by: ++ ++$ git clone http://review.coreboot.org/p/blobs.git ++$ cd blobs ++ ++Find the following files: ++ ++* ./mainboard/google/link/descriptor.bin ++* ./mainboard/google/link/me.bin ++* ./northbridge/intel/sandybridge/systemagent-ivybridge.bin ++ ++The 3rd one should be renamed to mrc.bin. ++As for the video ROM, you can get it here [2]. ++Make sure all these binary blobs are put in the board directory. ++ ++Now you can build U-Boot and obtain u-boot.rom: ++ ++$ make chromebook_link_defconfig ++$ make all ++ ++Intel Crown Bay specific instructions: ++ ++U-Boot support of Intel Crown Bay board [3] relies on a binary blob called ++Firmware Support Package [4] to perform all the necessary initialization steps ++as documented in the BIOS Writer Guide, including initialization of the CPU, ++memory controller, chipset and certain bus interfaces. ++ ++Download the Intel FSP for Atom E6xx series and Platform Controller Hub EG20T, ++install it on your host and locate the FSP binary blob. Note this platform ++also requires a Chipset Micro Code (CMC) state machine binary to be present in ++the SPI flash where u-boot.rom resides, and this CMC binary blob can be found ++in this FSP package too. ++ ++* ./FSP/QUEENSBAY_FSP_GOLD_001_20-DECEMBER-2013.fd ++* ./Microcode/C0_22211.BIN ++ ++Rename the first one to fsp.bin and second one to cmc.bin and put them in the ++board directory. ++ ++Now you can build U-Boot and obtaim u-boot.rom ++ ++$ make crownbay_defconfig ++$ make all ++ ++CPU Microcode ++------------- ++Modern CPU usually requires a special bit stream called microcode [5] to be ++loaded on the processor after power up in order to function properly. U-Boot ++has already integrated these as hex dumps in the source tree. ++ ++Driver Model ++------------ ++x86 has been converted to use driver model for serial and GPIO. ++ ++Device Tree ++----------- ++x86 uses device tree to configure the board thus requires CONFIG_OF_CONTROL to ++be turned on. Not every device on the board is configured via devie tree, but ++more and more devices will be added as time goes by. Check out the directory ++arch/x86/dts/ for these device tree source files. ++ ++TODO List ++--------- ++- MTRR support (for performance) ++- Audio ++- Chrome OS verified boot ++- SMI and ACPI support, to provide platform info and facilities to Linux ++ ++References ++---------- ++[1] http://www.coreboot.org ++[2] http://www.coreboot.org/~stepan/pci8086,0166.rom ++[3] http://www.intel.com/content/www/us/en/embedded/design-tools/evaluation-platforms/atom-e660-eg20t-development-kit.html ++[4] http://www.intel.com/fsp ++[5] http://en.wikipedia.org/wiki/Microcode +diff -ruN u-boot-2015.01-rc3/drivers/bios_emulator/besys.c u-boot/drivers/bios_emulator/besys.c +--- u-boot-2015.01-rc3/drivers/bios_emulator/besys.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/bios_emulator/besys.c 2015-01-01 17:34:32.605497481 +0100 +@@ -48,8 +48,8 @@ + ****************************************************************************/ + + #define __io +-#include + #include ++#include + #include "biosemui.h" + + /*------------------------- Global Variables ------------------------------*/ +diff -ruN u-boot-2015.01-rc3/drivers/bios_emulator/bios.c u-boot/drivers/bios_emulator/bios.c +--- u-boot-2015.01-rc3/drivers/bios_emulator/bios.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/bios_emulator/bios.c 2015-01-01 17:34:32.605497481 +0100 +@@ -42,8 +42,8 @@ + ****************************************************************************/ + + #define __io +-#include + #include ++#include + #include "biosemui.h" + + /*----------------------------- Implementation ----------------------------*/ +diff -ruN u-boot-2015.01-rc3/drivers/block/dwc_ahsata.c u-boot/drivers/block/dwc_ahsata.c +--- u-boot-2015.01-rc3/drivers/block/dwc_ahsata.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/block/dwc_ahsata.c 2015-01-01 17:34:32.613497350 +0100 +@@ -594,22 +594,24 @@ + + int reset_sata(int dev) + { +- struct ahci_probe_ent *probe_ent = +- (struct ahci_probe_ent *)sata_dev_desc[dev].priv; +- struct sata_host_regs *host_mmio = +- (struct sata_host_regs *)probe_ent->mmio_base; ++ struct ahci_probe_ent *probe_ent; ++ struct sata_host_regs *host_mmio; + + if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) { + printf("The sata index %d is out of ranges\n\r", dev); + return -1; + } + ++ probe_ent = (struct ahci_probe_ent *)sata_dev_desc[dev].priv; ++ if (NULL == probe_ent) ++ /* not initialized, so nothing to reset */ ++ return 0; ++ ++ host_mmio = (struct sata_host_regs *)probe_ent->mmio_base; + setbits_le32(&host_mmio->ghc, SATA_HOST_GHC_HR); + while (readl(&host_mmio->ghc) & SATA_HOST_GHC_HR) + udelay(100); + +- disable_sata_clock(); +- + return 0; + } + +diff -ruN u-boot-2015.01-rc3/drivers/core/device.c u-boot/drivers/core/device.c +--- u-boot-2015.01-rc3/drivers/core/device.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/core/device.c 2015-01-01 17:34:32.621497219 +0100 +@@ -234,7 +234,7 @@ + void *dev_get_platdata(struct udevice *dev) + { + if (!dev) { +- dm_warn("%s: null device", __func__); ++ dm_warn("%s: null device\n", __func__); + return NULL; + } + +@@ -244,7 +244,7 @@ + void *dev_get_priv(struct udevice *dev) + { + if (!dev) { +- dm_warn("%s: null device", __func__); ++ dm_warn("%s: null device\n", __func__); + return NULL; + } + +@@ -254,7 +254,7 @@ + void *dev_get_parentdata(struct udevice *dev) + { + if (!dev) { +- dm_warn("%s: null device", __func__); ++ dm_warn("%s: null device\n", __func__); + return NULL; + } + +diff -ruN u-boot-2015.01-rc3/drivers/crypto/fsl/jr.c u-boot/drivers/crypto/fsl/jr.c +--- u-boot-2015.01-rc3/drivers/crypto/fsl/jr.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/crypto/fsl/jr.c 2015-01-01 17:34:32.621497219 +0100 +@@ -246,7 +246,7 @@ + struct result op; + int ret = 0; + +- memset(&op, sizeof(op), 0); ++ memset(&op, 0, sizeof(op)); + + ret = jr_enqueue(desc, desc_done, &op); + if (ret) { +diff -ruN u-boot-2015.01-rc3/drivers/ddr/fsl/arm_ddr_gen3.c u-boot/drivers/ddr/fsl/arm_ddr_gen3.c +--- u-boot-2015.01-rc3/drivers/ddr/fsl/arm_ddr_gen3.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/ddr/fsl/arm_ddr_gen3.c 2015-01-01 17:34:32.621497219 +0100 +@@ -92,7 +92,6 @@ + ddr_out32(&ddr->timing_cfg_0, regs->timing_cfg_0); + ddr_out32(&ddr->timing_cfg_1, regs->timing_cfg_1); + ddr_out32(&ddr->timing_cfg_2, regs->timing_cfg_2); +- ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); + ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode); + ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2); + ddr_out32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3); +@@ -105,9 +104,6 @@ + ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval); + ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init); + ddr_out32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl); +- ddr_out32(&ddr->init_addr, regs->ddr_init_addr); +- ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr); +- + ddr_out32(&ddr->timing_cfg_4, regs->timing_cfg_4); + ddr_out32(&ddr->timing_cfg_5, regs->timing_cfg_5); + ddr_out32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); +@@ -128,7 +124,24 @@ + ddr_out32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); + ddr_out32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); + ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1); +- ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2); ++#ifdef CONFIG_DEEP_SLEEP ++ if (is_warm_boot()) { ++ ddr_out32(&ddr->sdram_cfg_2, ++ regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT); ++ ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE); ++ ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA); ++ ++ /* DRAM VRef will not be trained */ ++ ddr_out32(&ddr->ddr_cdr2, ++ regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN); ++ } else ++#endif ++ { ++ ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); ++ ddr_out32(&ddr->init_addr, regs->ddr_init_addr); ++ ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr); ++ ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2); ++ } + ddr_out32(&ddr->err_disable, regs->err_disable); + ddr_out32(&ddr->err_int_en, regs->err_int_en); + for (i = 0; i < 32; i++) { +@@ -167,8 +180,20 @@ + udelay(500); + asm volatile("dsb sy;isb"); + ++#ifdef CONFIG_DEEP_SLEEP ++ if (is_warm_boot()) { ++ /* enter self-refresh */ ++ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2); ++ temp_sdram_cfg |= SDRAM_CFG2_FRC_SR; ++ ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg); ++ /* do board specific memory setup */ ++ board_mem_sleep_setup(); ++ ++ temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI); ++ } else ++#endif ++ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI; + /* Let the controller go */ +- temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI; + ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); + asm volatile("dsb sy;isb"); + +@@ -211,4 +236,12 @@ + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); ++#ifdef CONFIG_DEEP_SLEEP ++ if (is_warm_boot()) { ++ /* exit self-refresh */ ++ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2); ++ temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR; ++ ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg); ++ } ++#endif + } +diff -ruN u-boot-2015.01-rc3/drivers/ddr/fsl/ctrl_regs.c u-boot/drivers/ddr/fsl/ctrl_regs.c +--- u-boot-2015.01-rc3/drivers/ddr/fsl/ctrl_regs.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/ddr/fsl/ctrl_regs.c 2015-01-01 17:34:32.625497153 +0100 +@@ -324,6 +324,7 @@ + #elif defined(CONFIG_SYS_FSL_DDR3) + unsigned int data_rate = get_ddr_freq(0); + int txp; ++ unsigned int ip_rev; + int odt_overlap; + /* + * (tXARD and tXARDS). Empirical? +@@ -336,7 +337,25 @@ + */ + txp = max((int)mclk_ps * 3, (mclk_ps > 1540 ? 7500 : 6000)); + +- tmrd_mclk = 4; ++ ip_rev = fsl_ddr_get_version(); ++ if (ip_rev >= 0x40700) { ++ /* ++ * MRS_CYC = max(tMRD, tMOD) ++ * tMRD = 4nCK (8nCK for RDIMM) ++ * tMOD = max(12nCK, 15ns) ++ */ ++ tmrd_mclk = max((unsigned int)12, picos_to_mclk(15000)); ++ } else { ++ /* ++ * MRS_CYC = tMRD ++ * tMRD = 4nCK (8nCK for RDIMM) ++ */ ++ if (popts->registered_dimm_en) ++ tmrd_mclk = 8; ++ else ++ tmrd_mclk = 4; ++ } ++ + /* set the turnaround time */ + + /* +diff -ruN u-boot-2015.01-rc3/drivers/ddr/fsl/fsl_ddr_gen4.c u-boot/drivers/ddr/fsl/fsl_ddr_gen4.c +--- u-boot-2015.01-rc3/drivers/ddr/fsl/fsl_ddr_gen4.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/ddr/fsl/fsl_ddr_gen4.c 2015-01-01 17:34:32.625497153 +0100 +@@ -103,7 +103,6 @@ + ddr_out32(&ddr->dq_map_1, regs->dq_map_1); + ddr_out32(&ddr->dq_map_2, regs->dq_map_2); + ddr_out32(&ddr->dq_map_3, regs->dq_map_3); +- ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); + ddr_out32(&ddr->sdram_cfg_3, regs->ddr_sdram_cfg_3); + ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode); + ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2); +@@ -124,8 +123,6 @@ + ddr_out32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl); + ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval); + ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init); +- ddr_out32(&ddr->init_addr, regs->ddr_init_addr); +- ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr); + ddr_out32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); + #ifndef CONFIG_SYS_FSL_DDR_EMU + /* +@@ -147,7 +144,24 @@ + ddr_out32(&ddr->ddr_sdram_rcw_5, regs->ddr_sdram_rcw_5); + ddr_out32(&ddr->ddr_sdram_rcw_6, regs->ddr_sdram_rcw_6); + ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1); +- ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2); ++#ifdef CONFIG_DEEP_SLEEP ++ if (is_warm_boot()) { ++ ddr_out32(&ddr->sdram_cfg_2, ++ regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT); ++ ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE); ++ ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA); ++ ++ /* DRAM VRef will not be trained */ ++ ddr_out32(&ddr->ddr_cdr2, ++ regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN); ++ } else ++#endif ++ { ++ ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); ++ ddr_out32(&ddr->init_addr, regs->ddr_init_addr); ++ ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr); ++ ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2); ++ } + ddr_out32(&ddr->err_disable, regs->err_disable); + ddr_out32(&ddr->err_int_en, regs->err_int_en); + for (i = 0; i < 32; i++) { +@@ -187,8 +201,20 @@ + mb(); + isb(); + ++#ifdef CONFIG_DEEP_SLEEP ++ if (is_warm_boot()) { ++ /* enter self-refresh */ ++ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2); ++ temp_sdram_cfg |= SDRAM_CFG2_FRC_SR; ++ ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg); ++ /* do board specific memory setup */ ++ board_mem_sleep_setup(); ++ ++ temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI); ++ } else ++#endif ++ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI; + /* Let the controller go */ +- temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI; + ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); + mb(); + isb(); +@@ -233,4 +259,12 @@ + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); ++#ifdef CONFIG_DEEP_SLEEP ++ if (is_warm_boot()) { ++ /* exit self-refresh */ ++ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2); ++ temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR; ++ ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg); ++ } ++#endif + } +diff -ruN u-boot-2015.01-rc3/drivers/ddr/fsl/mpc85xx_ddr_gen3.c u-boot/drivers/ddr/fsl/mpc85xx_ddr_gen3.c +--- u-boot-2015.01-rc3/drivers/ddr/fsl/mpc85xx_ddr_gen3.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/ddr/fsl/mpc85xx_ddr_gen3.c 2015-01-01 17:34:32.625497153 +0100 +@@ -15,8 +15,6 @@ + #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL + #endif + +-DECLARE_GLOBAL_DATA_PTR; +- + /* + * regs has the to-be-set values for DDR controller registers + * ctrl_num is the DDR controller number +@@ -44,16 +42,6 @@ + u32 save1, save2; + #endif + +-#ifdef CONFIG_DEEP_SLEEP +- const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +- bool sleep_flag = 0; +-#endif +- +-#ifdef CONFIG_DEEP_SLEEP +- if (in_be32(&gur->scrtsr[0]) & (1 << 3)) +- sleep_flag = 1; +-#endif +- + switch (ctrl_num) { + case 0: + ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; +@@ -130,13 +118,6 @@ + out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0); + out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1); + out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2); +-#ifdef CONFIG_DEEP_SLEEP +- if (sleep_flag) +- out_be32(&ddr->sdram_cfg_2, +- regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT); +- else +-#endif +- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); + out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode); + out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2); + out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3); +@@ -149,17 +130,6 @@ + out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval); + out_be32(&ddr->sdram_data_init, regs->ddr_data_init); + out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl); +-#ifdef CONFIG_DEEP_SLEEP +- if (sleep_flag) { +- out_be32(&ddr->init_addr, 0); +- out_be32(&ddr->init_ext_addr, (1 << 31)); +- } else +-#endif +- { +- out_be32(&ddr->init_addr, regs->ddr_init_addr); +- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr); +- } +- + out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4); + out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5); + out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); +@@ -180,7 +150,24 @@ + out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); + out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); + out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1); +- out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2); ++#ifdef CONFIG_DEEP_SLEEP ++ if (is_warm_boot()) { ++ out_be32(&ddr->sdram_cfg_2, ++ regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT); ++ out_be32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE); ++ out_be32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA); ++ ++ /* DRAM VRef will not be trained */ ++ out_be32(&ddr->ddr_cdr2, ++ regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN); ++ } else ++#endif ++ { ++ out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); ++ out_be32(&ddr->init_addr, regs->ddr_init_addr); ++ out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr); ++ out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2); ++ } + out_be32(&ddr->err_disable, regs->err_disable); + out_be32(&ddr->err_int_en, regs->err_int_en); + for (i = 0; i < 32; i++) { +@@ -400,21 +387,17 @@ + asm volatile("sync;isync"); + + #ifdef CONFIG_DEEP_SLEEP +- if (sleep_flag) { ++ if (is_warm_boot()) { + /* enter self-refresh */ +- setbits_be32(&ddr->sdram_cfg_2, (1 << 31)); ++ setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR); + /* do board specific memory setup */ + board_mem_sleep_setup(); +- } +-#endif +- +- /* Let the controller go */ +-#ifdef CONFIG_DEEP_SLEEP +- if (sleep_flag) + temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) | SDRAM_CFG_BI); +- else ++ } else + #endif + temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI); ++ ++ /* Let the controller go */ + out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); + asm volatile("sync;isync"); + +@@ -566,8 +549,8 @@ + } + #endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */ + #ifdef CONFIG_DEEP_SLEEP +- if (sleep_flag) ++ if (is_warm_boot()) + /* exit self-refresh */ +- clrbits_be32(&ddr->sdram_cfg_2, (1 << 31)); ++ clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR); + #endif + } +diff -ruN u-boot-2015.01-rc3/drivers/dfu/dfu.c u-boot/drivers/dfu/dfu.c +--- u-boot-2015.01-rc3/drivers/dfu/dfu.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/dfu/dfu.c 2015-01-01 17:34:32.629497087 +0100 +@@ -17,7 +17,6 @@ + #include + #include + +-static bool dfu_detach_request; + static LIST_HEAD(dfu_list); + static int dfu_alt_num; + static int alt_num_cnt; +@@ -39,21 +38,6 @@ + return true; + } + +-bool dfu_detach(void) +-{ +- return dfu_detach_request; +-} +- +-void dfu_trigger_detach(void) +-{ +- dfu_detach_request = true; +-} +- +-void dfu_clear_detach(void) +-{ +- dfu_detach_request = false; +-} +- + static int dfu_find_alt_num(const char *s) + { + int i = 0; +@@ -111,8 +95,12 @@ + return dfu_buf; + + s = getenv("dfu_bufsiz"); +- dfu_buf_size = s ? (unsigned long)simple_strtol(s, NULL, 16) : +- CONFIG_SYS_DFU_DATA_BUF_SIZE; ++ if (s) ++ dfu_buf_size = (unsigned long)simple_strtol(s, NULL, 0); ++ ++ if (!s || !dfu_buf_size) ++ dfu_buf_size = CONFIG_SYS_DFU_DATA_BUF_SIZE; ++ + if (dfu->max_buf_size && dfu_buf_size > dfu->max_buf_size) + dfu_buf_size = dfu->max_buf_size; + +@@ -544,10 +532,35 @@ + int dfu_get_alt(char *name) + { + struct dfu_entity *dfu; ++ char *str; + + list_for_each_entry(dfu, &dfu_list, list) { +- if (!strncmp(dfu->name, name, strlen(dfu->name))) +- return dfu->alt; ++ if (dfu->name[0] != '/') { ++ if (!strncmp(dfu->name, name, strlen(dfu->name))) ++ return dfu->alt; ++ } else { ++ /* ++ * One must also consider absolute path ++ * (/boot/bin/uImage) available at dfu->name when ++ * compared "plain" file name (uImage) ++ * ++ * It is the case for e.g. thor gadget where lthor SW ++ * sends only the file name, so only the very last part ++ * of path must be checked for equality ++ */ ++ ++ str = strstr(dfu->name, name); ++ if (!str) ++ continue; ++ ++ /* ++ * Check if matching substring is the last element of ++ * dfu->name (uImage) ++ */ ++ if (strlen(dfu->name) == ++ ((str - dfu->name) + strlen(name))) ++ return dfu->alt; ++ } + } + + return -ENODEV; +diff -ruN u-boot-2015.01-rc3/drivers/dfu/dfu_mmc.c u-boot/drivers/dfu/dfu_mmc.c +--- u-boot-2015.01-rc3/drivers/dfu/dfu_mmc.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/dfu/dfu_mmc.c 2015-01-01 17:34:32.629497087 +0100 +@@ -40,10 +40,16 @@ + static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu, + u64 offset, void *buf, long *len) + { +- struct mmc *mmc = find_mmc_device(dfu->data.mmc.dev_num); ++ struct mmc *mmc; + u32 blk_start, blk_count, n = 0; + int ret, part_num_bkp = 0; + ++ mmc = find_mmc_device(dfu->data.mmc.dev_num); ++ if (!mmc) { ++ error("Device MMC %d - not found!", dfu->data.mmc.dev_num); ++ return -ENODEV; ++ } ++ + /* + * We must ensure that we work in lba_blk_size chunks, so ALIGN + * this value. +diff -ruN u-boot-2015.01-rc3/drivers/gpio/intel_ich6_gpio.c u-boot/drivers/gpio/intel_ich6_gpio.c +--- u-boot-2015.01-rc3/drivers/gpio/intel_ich6_gpio.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/gpio/intel_ich6_gpio.c 2015-01-01 17:34:32.637496957 +0100 +@@ -34,69 +34,21 @@ + #include + #include + #include +-#ifdef CONFIG_X86_RESET_VECTOR +-#include +-#define SUPPORT_GPIO_SETUP +-#endif + + #define GPIO_PER_BANK 32 + +-/* Where in config space is the register that points to the GPIO registers? */ +-#define PCI_CFG_GPIOBASE 0x48 +- + struct ich6_bank_priv { + /* These are I/O addresses */ +- uint32_t use_sel; +- uint32_t io_sel; +- uint32_t lvl; ++ uint16_t use_sel; ++ uint16_t io_sel; ++ uint16_t lvl; + }; + +-#ifdef SUPPORT_GPIO_SETUP +-static void setup_pch_gpios(const struct pch_gpio_map *gpio) +-{ +- u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; +- +- /* GPIO Set 1 */ +- if (gpio->set1.level) +- outl(*((u32 *)gpio->set1.level), gpiobase + GP_LVL); +- if (gpio->set1.mode) +- outl(*((u32 *)gpio->set1.mode), gpiobase + GPIO_USE_SEL); +- if (gpio->set1.direction) +- outl(*((u32 *)gpio->set1.direction), gpiobase + GP_IO_SEL); +- if (gpio->set1.reset) +- outl(*((u32 *)gpio->set1.reset), gpiobase + GP_RST_SEL1); +- if (gpio->set1.invert) +- outl(*((u32 *)gpio->set1.invert), gpiobase + GPI_INV); +- if (gpio->set1.blink) +- outl(*((u32 *)gpio->set1.blink), gpiobase + GPO_BLINK); +- +- /* GPIO Set 2 */ +- if (gpio->set2.level) +- outl(*((u32 *)gpio->set2.level), gpiobase + GP_LVL2); +- if (gpio->set2.mode) +- outl(*((u32 *)gpio->set2.mode), gpiobase + GPIO_USE_SEL2); +- if (gpio->set2.direction) +- outl(*((u32 *)gpio->set2.direction), gpiobase + GP_IO_SEL2); +- if (gpio->set2.reset) +- outl(*((u32 *)gpio->set2.reset), gpiobase + GP_RST_SEL2); +- +- /* GPIO Set 3 */ +- if (gpio->set3.level) +- outl(*((u32 *)gpio->set3.level), gpiobase + GP_LVL3); +- if (gpio->set3.mode) +- outl(*((u32 *)gpio->set3.mode), gpiobase + GPIO_USE_SEL3); +- if (gpio->set3.direction) +- outl(*((u32 *)gpio->set3.direction), gpiobase + GP_IO_SEL3); +- if (gpio->set3.reset) +- outl(*((u32 *)gpio->set3.reset), gpiobase + GP_RST_SEL3); +-} +- + /* TODO: Move this to device tree, or platform data */ + void ich_gpio_set_gpio_map(const struct pch_gpio_map *map) + { + gd->arch.gpio_map = map; + } +-#endif /* SUPPORT_GPIO_SETUP */ + + static int gpio_ich6_ofdata_to_platdata(struct udevice *dev) + { +@@ -105,7 +57,7 @@ + u8 tmpbyte; + u16 tmpword; + u32 tmplong; +- u32 gpiobase; ++ u16 gpiobase; + int offset; + + /* Where should it be? */ +@@ -164,11 +116,15 @@ + /* + * GPIOBASE moved to its current offset with ICH6, but prior to + * that it was unused (or undocumented). Check that it looks +- * okay: not all ones or zeros, and mapped to I/O space (bit 0). ++ * okay: not all ones or zeros. ++ * ++ * Note we don't need check bit0 here, because the Tunnel Creek ++ * GPIO base address register bit0 is reserved (read returns 0), ++ * while on the Ivybridge the bit0 is used to indicate it is an ++ * I/O space. + */ + tmplong = pci_read_config32(pci_dev, PCI_CFG_GPIOBASE); +- if (tmplong == 0x00000000 || tmplong == 0xffffffff || +- !(tmplong & 0x00000001)) { ++ if (tmplong == 0x00000000 || tmplong == 0xffffffff) { + debug("%s: unexpected GPIOBASE value\n", __func__); + return -ENODEV; + } +@@ -179,7 +135,7 @@ + * at the offset that we just read. Bit 0 indicates that it's + * an I/O address, not a memory address, so mask that off. + */ +- gpiobase = tmplong & 0xfffffffe; ++ gpiobase = tmplong & 0xfffe; + offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "reg", -1); + if (offset == -1) { + debug("%s: Invalid register offset %d\n", __func__, offset); +@@ -198,12 +154,11 @@ + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + struct ich6_bank_priv *bank = dev_get_priv(dev); + +-#ifdef SUPPORT_GPIO_SETUP + if (gd->arch.gpio_map) { +- setup_pch_gpios(gd->arch.gpio_map); ++ setup_pch_gpios(plat->base_addr, gd->arch.gpio_map); + gd->arch.gpio_map = NULL; + } +-#endif ++ + uc_priv->gpio_count = GPIO_PER_BANK; + uc_priv->bank_name = plat->bank_name; + bank->use_sel = plat->base_addr; +@@ -251,6 +206,8 @@ + struct ich6_bank_priv *bank = dev_get_priv(dev); + u32 tmplong; + ++ gpio_set_value(offset, value); ++ + tmplong = inl(bank->io_sel); + tmplong &= ~(1UL << offset); + outl(bank->io_sel, tmplong); +diff -ruN u-boot-2015.01-rc3/drivers/i2c/i2c-emul-uclass.c u-boot/drivers/i2c/i2c-emul-uclass.c +--- u-boot-2015.01-rc3/drivers/i2c/i2c-emul-uclass.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/drivers/i2c/i2c-emul-uclass.c 2015-01-01 17:34:32.645496825 +0100 +@@ -0,0 +1,14 @@ ++/* ++ * Copyright (c) 2014 Google, Inc ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++ ++UCLASS_DRIVER(i2c_emul) = { ++ .id = UCLASS_I2C_EMUL, ++ .name = "i2c_emul", ++}; +diff -ruN u-boot-2015.01-rc3/drivers/i2c/i2c-uclass.c u-boot/drivers/i2c/i2c-uclass.c +--- u-boot-2015.01-rc3/drivers/i2c/i2c-uclass.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/drivers/i2c/i2c-uclass.c 2015-01-01 17:34:32.645496825 +0100 +@@ -0,0 +1,466 @@ ++/* ++ * Copyright (c) 2014 Google, Inc ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#define I2C_MAX_OFFSET_LEN 4 ++ ++/** ++ * i2c_setup_offset() - Set up a new message with a chip offset ++ * ++ * @chip: Chip to use ++ * @offset: Byte offset within chip ++ * @offset_buf: Place to put byte offset ++ * @msg: Message buffer ++ * @return 0 if OK, -EADDRNOTAVAIL if the offset length is 0. In that case the ++ * message is still set up but will not contain an offset. ++ */ ++static int i2c_setup_offset(struct dm_i2c_chip *chip, uint offset, ++ uint8_t offset_buf[], struct i2c_msg *msg) ++{ ++ int offset_len; ++ ++ msg->addr = chip->chip_addr; ++ msg->flags = chip->flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0; ++ msg->len = chip->offset_len; ++ msg->buf = offset_buf; ++ if (!chip->offset_len) ++ return -EADDRNOTAVAIL; ++ assert(chip->offset_len <= I2C_MAX_OFFSET_LEN); ++ offset_len = chip->offset_len; ++ while (offset_len--) ++ *offset_buf++ = offset >> (8 * offset_len); ++ ++ return 0; ++} ++ ++static int i2c_read_bytewise(struct udevice *dev, uint offset, ++ uint8_t *buffer, int len) ++{ ++ struct dm_i2c_chip *chip = dev_get_parentdata(dev); ++ struct udevice *bus = dev_get_parent(dev); ++ struct dm_i2c_ops *ops = i2c_get_ops(bus); ++ struct i2c_msg msg[2], *ptr; ++ uint8_t offset_buf[I2C_MAX_OFFSET_LEN]; ++ int ret; ++ int i; ++ ++ for (i = 0; i < len; i++) { ++ if (i2c_setup_offset(chip, offset + i, offset_buf, msg)) ++ return -EINVAL; ++ ptr = msg + 1; ++ ptr->addr = chip->chip_addr; ++ ptr->flags = msg->flags | I2C_M_RD; ++ ptr->len = 1; ++ ptr->buf = &buffer[i]; ++ ptr++; ++ ++ ret = ops->xfer(bus, msg, ptr - msg); ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int i2c_write_bytewise(struct udevice *dev, uint offset, ++ const uint8_t *buffer, int len) ++{ ++ struct dm_i2c_chip *chip = dev_get_parentdata(dev); ++ struct udevice *bus = dev_get_parent(dev); ++ struct dm_i2c_ops *ops = i2c_get_ops(bus); ++ struct i2c_msg msg[1]; ++ uint8_t buf[I2C_MAX_OFFSET_LEN + 1]; ++ int ret; ++ int i; ++ ++ for (i = 0; i < len; i++) { ++ if (i2c_setup_offset(chip, offset + i, buf, msg)) ++ return -EINVAL; ++ buf[msg->len++] = buffer[i]; ++ ++ ret = ops->xfer(bus, msg, 1); ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} ++ ++int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, int len) ++{ ++ struct dm_i2c_chip *chip = dev_get_parentdata(dev); ++ struct udevice *bus = dev_get_parent(dev); ++ struct dm_i2c_ops *ops = i2c_get_ops(bus); ++ struct i2c_msg msg[2], *ptr; ++ uint8_t offset_buf[I2C_MAX_OFFSET_LEN]; ++ int msg_count; ++ ++ if (!ops->xfer) ++ return -ENOSYS; ++ if (chip->flags & DM_I2C_CHIP_RD_ADDRESS) ++ return i2c_read_bytewise(dev, offset, buffer, len); ++ ptr = msg; ++ if (!i2c_setup_offset(chip, offset, offset_buf, ptr)) ++ ptr++; ++ ++ if (len) { ++ ptr->addr = chip->chip_addr; ++ ptr->flags = chip->flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0; ++ ptr->flags |= I2C_M_RD; ++ ptr->len = len; ++ ptr->buf = buffer; ++ ptr++; ++ } ++ msg_count = ptr - msg; ++ ++ return ops->xfer(bus, msg, msg_count); ++} ++ ++int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, int len) ++{ ++ struct dm_i2c_chip *chip = dev_get_parentdata(dev); ++ struct udevice *bus = dev_get_parent(dev); ++ struct dm_i2c_ops *ops = i2c_get_ops(bus); ++ struct i2c_msg msg[1]; ++ ++ if (!ops->xfer) ++ return -ENOSYS; ++ ++ if (chip->flags & DM_I2C_CHIP_WR_ADDRESS) ++ return i2c_write_bytewise(dev, offset, buffer, len); ++ /* ++ * The simple approach would be to send two messages here: one to ++ * set the offset and one to write the bytes. However some drivers ++ * will not be expecting this, and some chips won't like how the ++ * driver presents this on the I2C bus. ++ * ++ * The API does not support separate offset and data. We could extend ++ * it with a flag indicating that there is data in the next message ++ * that needs to be processed in the same transaction. We could ++ * instead add an additional buffer to each message. For now, handle ++ * this in the uclass since it isn't clear what the impact on drivers ++ * would be with this extra complication. Unfortunately this means ++ * copying the message. ++ * ++ * Use the stack for small messages, malloc() for larger ones. We ++ * need to allow space for the offset (up to 4 bytes) and the message ++ * itself. ++ */ ++ if (len < 64) { ++ uint8_t buf[I2C_MAX_OFFSET_LEN + len]; ++ ++ i2c_setup_offset(chip, offset, buf, msg); ++ msg->len += len; ++ memcpy(buf + chip->offset_len, buffer, len); ++ ++ return ops->xfer(bus, msg, 1); ++ } else { ++ uint8_t *buf; ++ int ret; ++ ++ buf = malloc(I2C_MAX_OFFSET_LEN + len); ++ if (!buf) ++ return -ENOMEM; ++ i2c_setup_offset(chip, offset, buf, msg); ++ msg->len += len; ++ memcpy(buf + chip->offset_len, buffer, len); ++ ++ ret = ops->xfer(bus, msg, 1); ++ free(buf); ++ return ret; ++ } ++} ++ ++/** ++ * i2c_probe_chip() - probe for a chip on a bus ++ * ++ * @bus: Bus to probe ++ * @chip_addr: Chip address to probe ++ * @flags: Flags for the chip ++ * @return 0 if found, -ENOSYS if the driver is invalid, -EREMOTEIO if the chip ++ * does not respond to probe ++ */ ++static int i2c_probe_chip(struct udevice *bus, uint chip_addr, ++ enum dm_i2c_chip_flags chip_flags) ++{ ++ struct dm_i2c_ops *ops = i2c_get_ops(bus); ++ struct i2c_msg msg[1]; ++ int ret; ++ ++ if (ops->probe_chip) { ++ ret = ops->probe_chip(bus, chip_addr, chip_flags); ++ if (!ret || ret != -ENOSYS) ++ return ret; ++ } ++ ++ if (!ops->xfer) ++ return -ENOSYS; ++ ++ /* Probe with a zero-length message */ ++ msg->addr = chip_addr; ++ msg->flags = chip_flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0; ++ msg->len = 0; ++ msg->buf = NULL; ++ ++ return ops->xfer(bus, msg, 1); ++} ++ ++static int i2c_bind_driver(struct udevice *bus, uint chip_addr, ++ struct udevice **devp) ++{ ++ struct dm_i2c_chip chip; ++ char name[30], *str; ++ struct udevice *dev; ++ int ret; ++ ++ snprintf(name, sizeof(name), "generic_%x", chip_addr); ++ str = strdup(name); ++ ret = device_bind_driver(bus, "i2c_generic_chip_drv", str, &dev); ++ debug("%s: device_bind_driver: ret=%d\n", __func__, ret); ++ if (ret) ++ goto err_bind; ++ ++ /* Tell the device what we know about it */ ++ memset(&chip, '\0', sizeof(chip)); ++ chip.chip_addr = chip_addr; ++ chip.offset_len = 1; /* we assume */ ++ ret = device_probe_child(dev, &chip); ++ debug("%s: device_probe_child: ret=%d\n", __func__, ret); ++ if (ret) ++ goto err_probe; ++ ++ *devp = dev; ++ return 0; ++ ++err_probe: ++ device_unbind(dev); ++err_bind: ++ free(str); ++ return ret; ++} ++ ++int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp) ++{ ++ struct udevice *dev; ++ ++ debug("%s: Searching bus '%s' for address %02x: ", __func__, ++ bus->name, chip_addr); ++ for (device_find_first_child(bus, &dev); dev; ++ device_find_next_child(&dev)) { ++ struct dm_i2c_chip store; ++ struct dm_i2c_chip *chip = dev_get_parentdata(dev); ++ int ret; ++ ++ if (!chip) { ++ chip = &store; ++ i2c_chip_ofdata_to_platdata(gd->fdt_blob, ++ dev->of_offset, chip); ++ } ++ if (chip->chip_addr == chip_addr) { ++ ret = device_probe(dev); ++ debug("found, ret=%d\n", ret); ++ if (ret) ++ return ret; ++ *devp = dev; ++ return 0; ++ } ++ } ++ debug("not found\n"); ++ return i2c_bind_driver(bus, chip_addr, devp); ++} ++ ++int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp) ++{ ++ struct udevice *bus; ++ int ret; ++ ++ ret = uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus); ++ if (ret) { ++ debug("Cannot find I2C bus %d\n", busnum); ++ return ret; ++ } ++ ret = i2c_get_chip(bus, chip_addr, devp); ++ if (ret) { ++ debug("Cannot find I2C chip %02x on bus %d\n", chip_addr, ++ busnum); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++int i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags, ++ struct udevice **devp) ++{ ++ int ret; ++ ++ *devp = NULL; ++ ++ /* First probe that chip */ ++ ret = i2c_probe_chip(bus, chip_addr, chip_flags); ++ debug("%s: bus='%s', address %02x, ret=%d\n", __func__, bus->name, ++ chip_addr, ret); ++ if (ret) ++ return ret; ++ ++ /* The chip was found, see if we have a driver, and probe it */ ++ ret = i2c_get_chip(bus, chip_addr, devp); ++ debug("%s: i2c_get_chip: ret=%d\n", __func__, ret); ++ ++ return ret; ++} ++ ++int i2c_set_bus_speed(struct udevice *bus, unsigned int speed) ++{ ++ struct dm_i2c_ops *ops = i2c_get_ops(bus); ++ struct dm_i2c_bus *i2c = bus->uclass_priv; ++ int ret; ++ ++ /* ++ * If we have a method, call it. If not then the driver probably wants ++ * to deal with speed changes on the next transfer. It can easily read ++ * the current speed from this uclass ++ */ ++ if (ops->set_bus_speed) { ++ ret = ops->set_bus_speed(bus, speed); ++ if (ret) ++ return ret; ++ } ++ i2c->speed_hz = speed; ++ ++ return 0; ++} ++ ++/* ++ * i2c_get_bus_speed: ++ * ++ * Returns speed of selected I2C bus in Hz ++ */ ++int i2c_get_bus_speed(struct udevice *bus) ++{ ++ struct dm_i2c_ops *ops = i2c_get_ops(bus); ++ struct dm_i2c_bus *i2c = bus->uclass_priv; ++ ++ if (!ops->get_bus_speed) ++ return i2c->speed_hz; ++ ++ return ops->get_bus_speed(bus); ++} ++ ++int i2c_set_chip_flags(struct udevice *dev, uint flags) ++{ ++ struct udevice *bus = dev->parent; ++ struct dm_i2c_chip *chip = dev_get_parentdata(dev); ++ struct dm_i2c_ops *ops = i2c_get_ops(bus); ++ int ret; ++ ++ if (ops->set_flags) { ++ ret = ops->set_flags(dev, flags); ++ if (ret) ++ return ret; ++ } ++ chip->flags = flags; ++ ++ return 0; ++} ++ ++int i2c_get_chip_flags(struct udevice *dev, uint *flagsp) ++{ ++ struct dm_i2c_chip *chip = dev_get_parentdata(dev); ++ ++ *flagsp = chip->flags; ++ ++ return 0; ++} ++ ++int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len) ++{ ++ struct dm_i2c_chip *chip = dev_get_parentdata(dev); ++ ++ if (offset_len > I2C_MAX_OFFSET_LEN) ++ return -EINVAL; ++ chip->offset_len = offset_len; ++ ++ return 0; ++} ++ ++int i2c_deblock(struct udevice *bus) ++{ ++ struct dm_i2c_ops *ops = i2c_get_ops(bus); ++ ++ /* ++ * We could implement a software deblocking here if we could get ++ * access to the GPIOs used by I2C, and switch them to GPIO mode ++ * and then back to I2C. This is somewhat beyond our powers in ++ * driver model at present, so for now just fail. ++ * ++ * See https://patchwork.ozlabs.org/patch/399040/ ++ */ ++ if (!ops->deblock) ++ return -ENOSYS; ++ ++ return ops->deblock(bus); ++} ++ ++int i2c_chip_ofdata_to_platdata(const void *blob, int node, ++ struct dm_i2c_chip *chip) ++{ ++ chip->offset_len = 1; /* default */ ++ chip->flags = 0; ++ chip->chip_addr = fdtdec_get_int(gd->fdt_blob, node, "reg", -1); ++ if (chip->chip_addr == -1) { ++ debug("%s: I2C Node '%s' has no 'reg' property\n", __func__, ++ fdt_get_name(blob, node, NULL)); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int i2c_post_probe(struct udevice *dev) ++{ ++ struct dm_i2c_bus *i2c = dev->uclass_priv; ++ ++ i2c->speed_hz = fdtdec_get_int(gd->fdt_blob, dev->of_offset, ++ "clock-frequency", 100000); ++ ++ return i2c_set_bus_speed(dev, i2c->speed_hz); ++} ++ ++int i2c_post_bind(struct udevice *dev) ++{ ++ /* Scan the bus for devices */ ++ return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false); ++} ++ ++UCLASS_DRIVER(i2c) = { ++ .id = UCLASS_I2C, ++ .name = "i2c", ++ .per_device_auto_alloc_size = sizeof(struct dm_i2c_bus), ++ .post_bind = i2c_post_bind, ++ .post_probe = i2c_post_probe, ++}; ++ ++UCLASS_DRIVER(i2c_generic) = { ++ .id = UCLASS_I2C_GENERIC, ++ .name = "i2c_generic", ++}; ++ ++U_BOOT_DRIVER(i2c_generic_chip_drv) = { ++ .name = "i2c_generic_chip_drv", ++ .id = UCLASS_I2C_GENERIC, ++}; +diff -ruN u-boot-2015.01-rc3/drivers/i2c/Makefile u-boot/drivers/i2c/Makefile +--- u-boot-2015.01-rc3/drivers/i2c/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/i2c/Makefile 2015-01-01 17:34:32.641496891 +0100 +@@ -4,6 +4,7 @@ + # + # SPDX-License-Identifier: GPL-2.0+ + # ++obj-$(CONFIG_DM_I2C) += i2c-uclass.o + + obj-$(CONFIG_SYS_I2C_ADI) += adi_i2c.o + obj-$(CONFIG_I2C_MV) += mv_i2c.o +@@ -26,6 +27,7 @@ + obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o + obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o + obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o ++obj-$(CONFIG_SYS_I2C_SANDBOX) += sandbox_i2c.o i2c-emul-uclass.o + obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o + obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o + obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o +diff -ruN u-boot-2015.01-rc3/drivers/i2c/sandbox_i2c.c u-boot/drivers/i2c/sandbox_i2c.c +--- u-boot-2015.01-rc3/drivers/i2c/sandbox_i2c.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/drivers/i2c/sandbox_i2c.c 2015-01-01 17:34:32.649496760 +0100 +@@ -0,0 +1,111 @@ ++/* ++ * Simulate an I2C port ++ * ++ * Copyright (c) 2014 Google, Inc ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++struct dm_sandbox_i2c_emul_priv { ++ struct udevice *emul; ++}; ++ ++static int get_emul(struct udevice *dev, struct udevice **devp, ++ struct dm_i2c_ops **opsp) ++{ ++ struct dm_i2c_chip *priv; ++ int ret; ++ ++ *devp = NULL; ++ *opsp = NULL; ++ priv = dev_get_parentdata(dev); ++ if (!priv->emul) { ++ ret = dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, ++ false); ++ if (ret) ++ return ret; ++ ++ ret = device_get_child(dev, 0, &priv->emul); ++ if (ret) ++ return ret; ++ } ++ *devp = priv->emul; ++ *opsp = i2c_get_ops(priv->emul); ++ ++ return 0; ++} ++ ++static int sandbox_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, ++ int nmsgs) ++{ ++ struct dm_i2c_bus *i2c = bus->uclass_priv; ++ struct dm_i2c_ops *ops; ++ struct udevice *emul, *dev; ++ bool is_read; ++ int ret; ++ ++ /* Special test code to return success but with no emulation */ ++ if (msg->addr == SANDBOX_I2C_TEST_ADDR) ++ return 0; ++ ++ ret = i2c_get_chip(bus, msg->addr, &dev); ++ if (ret) ++ return ret; ++ ++ ret = get_emul(dev, &emul, &ops); ++ if (ret) ++ return ret; ++ ++ /* ++ * For testing, don't allow writing above 100KHz for writes and ++ * 400KHz for reads ++ */ ++ is_read = nmsgs > 1; ++ if (i2c->speed_hz > (is_read ? 400000 : 100000)) ++ return -EINVAL; ++ return ops->xfer(emul, msg, nmsgs); ++} ++ ++static const struct dm_i2c_ops sandbox_i2c_ops = { ++ .xfer = sandbox_i2c_xfer, ++}; ++ ++static int sandbox_i2c_child_pre_probe(struct udevice *dev) ++{ ++ struct dm_i2c_chip *i2c_chip = dev_get_parentdata(dev); ++ ++ /* Ignore our test address */ ++ if (i2c_chip->chip_addr == SANDBOX_I2C_TEST_ADDR) ++ return 0; ++ if (dev->of_offset == -1) ++ return 0; ++ ++ return i2c_chip_ofdata_to_platdata(gd->fdt_blob, dev->of_offset, ++ i2c_chip); ++} ++ ++static const struct udevice_id sandbox_i2c_ids[] = { ++ { .compatible = "sandbox,i2c" }, ++ { } ++}; ++ ++U_BOOT_DRIVER(i2c_sandbox) = { ++ .name = "i2c_sandbox", ++ .id = UCLASS_I2C, ++ .of_match = sandbox_i2c_ids, ++ .per_child_auto_alloc_size = sizeof(struct dm_i2c_chip), ++ .child_pre_probe = sandbox_i2c_child_pre_probe, ++ .ops = &sandbox_i2c_ops, ++}; +diff -ruN u-boot-2015.01-rc3/drivers/i2c/tegra_i2c.c u-boot/drivers/i2c/tegra_i2c.c +--- u-boot-2015.01-rc3/drivers/i2c/tegra_i2c.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/i2c/tegra_i2c.c 2015-01-01 17:34:32.649496760 +0100 +@@ -7,6 +7,8 @@ + */ + + #include ++#include ++#include + #include + #include + #include +@@ -19,6 +21,12 @@ + + DECLARE_GLOBAL_DATA_PTR; + ++enum i2c_type { ++ TYPE_114, ++ TYPE_STD, ++ TYPE_DVC, ++}; ++ + /* Information about i2c controller */ + struct i2c_bus { + int id; +@@ -27,20 +35,17 @@ + int pinmux_config; + struct i2c_control *control; + struct i2c_ctlr *regs; +- int is_dvc; /* DVC type, rather than I2C */ +- int is_scs; /* single clock source (T114+) */ ++ enum i2c_type type; + int inited; /* bus is inited */ + }; + +-static struct i2c_bus i2c_controllers[TEGRA_I2C_NUM_CONTROLLERS]; +- + static void set_packet_mode(struct i2c_bus *i2c_bus) + { + u32 config; + + config = I2C_CNFG_NEW_MASTER_FSM_MASK | I2C_CNFG_PACKET_MODE_MASK; + +- if (i2c_bus->is_dvc) { ++ if (i2c_bus->type == TYPE_DVC) { + struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs; + + writel(config, &dvc->cnfg); +@@ -65,6 +70,9 @@ + + static void i2c_init_controller(struct i2c_bus *i2c_bus) + { ++ if (!i2c_bus->speed) ++ return; ++ debug("%s: speed=%d\n", __func__, i2c_bus->speed); + /* + * Use PLLP - DP-04508-001_v06 datasheet indicates a divisor of 8 + * here, in section 23.3.1, but in fact we seem to need a factor of +@@ -73,7 +81,7 @@ + clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH, + i2c_bus->speed * 2 * 8); + +- if (i2c_bus->is_scs) { ++ if (i2c_bus->type == TYPE_114) { + /* + * T114 I2C went to a single clock source for standard/fast and + * HS clock speeds. The new clock rate setting calculation is: +@@ -98,7 +106,7 @@ + i2c_reset_controller(i2c_bus); + + /* Configure I2C controller. */ +- if (i2c_bus->is_dvc) { /* only for DVC I2C */ ++ if (i2c_bus->type == TYPE_DVC) { /* only for DVC I2C */ + struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs; + + setbits_le32(&dvc->ctrl3, DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK); +@@ -272,7 +280,7 @@ + return error; + } + +-static int tegra_i2c_write_data(struct i2c_bus *bus, u32 addr, u8 *data, ++static int tegra_i2c_write_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data, + u32 len, bool end_with_repeated_start) + { + int error; +@@ -286,14 +294,14 @@ + trans_info.num_bytes = len; + trans_info.is_10bit_address = 0; + +- error = send_recv_packets(bus, &trans_info); ++ error = send_recv_packets(i2c_bus, &trans_info); + if (error) + debug("tegra_i2c_write_data: Error (%d) !!!\n", error); + + return error; + } + +-static int tegra_i2c_read_data(struct i2c_bus *bus, u32 addr, u8 *data, ++static int tegra_i2c_read_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data, + u32 len) + { + int error; +@@ -305,52 +313,32 @@ + trans_info.num_bytes = len; + trans_info.is_10bit_address = 0; + +- error = send_recv_packets(bus, &trans_info); ++ error = send_recv_packets(i2c_bus, &trans_info); + if (error) + debug("tegra_i2c_read_data: Error (%d) !!!\n", error); + + return error; + } + +-#ifndef CONFIG_OF_CONTROL +-#error "Please enable device tree support to use this driver" +-#endif +- +-/** +- * Check that a bus number is valid and return a pointer to it +- * +- * @param bus_num Bus number to check / return +- * @return pointer to bus, if valid, else NULL +- */ +-static struct i2c_bus *tegra_i2c_get_bus(struct i2c_adapter *adap) ++static int tegra_i2c_set_bus_speed(struct udevice *dev, unsigned int speed) + { +- struct i2c_bus *bus; ++ struct i2c_bus *i2c_bus = dev_get_priv(dev); + +- bus = &i2c_controllers[adap->hwadapnr]; +- if (!bus->inited) { +- debug("%s: Bus %u not available\n", __func__, adap->hwadapnr); +- return NULL; +- } +- +- return bus; +-} +- +-static unsigned int tegra_i2c_set_bus_speed(struct i2c_adapter *adap, +- unsigned int speed) +-{ +- struct i2c_bus *bus; +- +- bus = tegra_i2c_get_bus(adap); +- if (!bus) +- return 0; +- bus->speed = speed; +- i2c_init_controller(bus); ++ i2c_bus->speed = speed; ++ i2c_init_controller(i2c_bus); + + return 0; + } + +-static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus) ++static int tegra_i2c_probe(struct udevice *dev) + { ++ struct i2c_bus *i2c_bus = dev_get_priv(dev); ++ const void *blob = gd->fdt_blob; ++ int node = dev->of_offset; ++ bool is_dvc; ++ ++ i2c_bus->id = dev->seq; ++ i2c_bus->type = dev_get_of_data(dev); + i2c_bus->regs = (struct i2c_ctlr *)fdtdec_get_addr(blob, node, "reg"); + + /* +@@ -358,7 +346,6 @@ + * far no one needs anything other than the default. + */ + i2c_bus->pinmux_config = FUNCMUX_DEFAULT; +- i2c_bus->speed = fdtdec_get_int(blob, node, "clock-frequency", 0); + i2c_bus->periph_id = clock_decode_periph_id(blob, node); + + /* +@@ -371,107 +358,25 @@ + * i2c_bus->pinmux_config = FUNCMUX_I2C2_PTA; + */ + if (i2c_bus->periph_id == -1) +- return -FDT_ERR_NOTFOUND; ++ return -EINVAL; + +- return 0; +-} +- +-/* +- * Process a list of nodes, adding them to our list of I2C ports. +- * +- * @param blob fdt blob +- * @param node_list list of nodes to process (any <=0 are ignored) +- * @param count number of nodes to process +- * @param is_dvc 1 if these are DVC ports, 0 if standard I2C +- * @param is_scs 1 if this HW uses a single clock source (T114+) +- * @return 0 if ok, -1 on error +- */ +-static int process_nodes(const void *blob, int node_list[], int count, +- int is_dvc, int is_scs) +-{ +- struct i2c_bus *i2c_bus; +- int i; +- +- /* build the i2c_controllers[] for each controller */ +- for (i = 0; i < count; i++) { +- int node = node_list[i]; +- +- if (node <= 0) +- continue; +- +- i2c_bus = &i2c_controllers[i]; +- i2c_bus->id = i; +- +- if (i2c_get_config(blob, node, i2c_bus)) { +- printf("i2c_init_board: failed to decode bus %d\n", i); +- return -1; +- } +- +- i2c_bus->is_scs = is_scs; +- +- i2c_bus->is_dvc = is_dvc; +- if (is_dvc) { +- i2c_bus->control = +- &((struct dvc_ctlr *)i2c_bus->regs)->control; +- } else { +- i2c_bus->control = &i2c_bus->regs->control; +- } +- debug("%s: controller bus %d at %p, periph_id %d, speed %d: ", +- is_dvc ? "dvc" : "i2c", i, i2c_bus->regs, +- i2c_bus->periph_id, i2c_bus->speed); +- i2c_init_controller(i2c_bus); +- debug("ok\n"); +- i2c_bus->inited = 1; +- +- /* Mark position as used */ +- node_list[i] = -1; ++ is_dvc = dev_get_of_data(dev) == TYPE_DVC; ++ if (is_dvc) { ++ i2c_bus->control = ++ &((struct dvc_ctlr *)i2c_bus->regs)->control; ++ } else { ++ i2c_bus->control = &i2c_bus->regs->control; + } ++ i2c_init_controller(i2c_bus); ++ debug("%s: controller bus %d at %p, periph_id %d, speed %d: ", ++ is_dvc ? "dvc" : "i2c", dev->seq, i2c_bus->regs, ++ i2c_bus->periph_id, i2c_bus->speed); + + return 0; + } + +-/* Sadly there is no error return from this function */ +-void i2c_init_board(void) +-{ +- int node_list[TEGRA_I2C_NUM_CONTROLLERS]; +- const void *blob = gd->fdt_blob; +- int count; +- +- /* First check for newer (T114+) I2C ports */ +- count = fdtdec_find_aliases_for_id(blob, "i2c", +- COMPAT_NVIDIA_TEGRA114_I2C, node_list, +- TEGRA_I2C_NUM_CONTROLLERS); +- if (process_nodes(blob, node_list, count, 0, 1)) +- return; +- +- /* Now get the older (T20/T30) normal I2C ports */ +- count = fdtdec_find_aliases_for_id(blob, "i2c", +- COMPAT_NVIDIA_TEGRA20_I2C, node_list, +- TEGRA_I2C_NUM_CONTROLLERS); +- if (process_nodes(blob, node_list, count, 0, 0)) +- return; +- +- /* Now look for dvc ports */ +- count = fdtdec_add_aliases_for_id(blob, "i2c", +- COMPAT_NVIDIA_TEGRA20_DVC, node_list, +- TEGRA_I2C_NUM_CONTROLLERS); +- if (process_nodes(blob, node_list, count, 1, 0)) +- return; +-} +- +-static void tegra_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) +-{ +- /* No i2c support prior to relocation */ +- if (!(gd->flags & GD_FLG_RELOC)) +- return; +- +- /* This will override the speed selected in the fdt for that port */ +- debug("i2c_init(speed=%u, slaveaddr=0x%x)\n", speed, slaveaddr); +- i2c_set_bus_speed(speed); +-} +- + /* i2c write version without the register address */ +-static int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer, ++static int i2c_write_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer, + int len, bool end_with_repeated_start) + { + int rc; +@@ -484,7 +389,7 @@ + debug("\n"); + + /* Shift 7-bit address over for lower-level i2c functions */ +- rc = tegra_i2c_write_data(bus, chip << 1, buffer, len, ++ rc = tegra_i2c_write_data(i2c_bus, chip << 1, buffer, len, + end_with_repeated_start); + if (rc) + debug("i2c_write_data(): rc=%d\n", rc); +@@ -493,14 +398,14 @@ + } + + /* i2c read version without the register address */ +-static int i2c_read_data(struct i2c_bus *bus, uchar chip, uchar *buffer, +- int len) ++static int i2c_read_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer, ++ int len) + { + int rc; + + debug("inside i2c_read_data():\n"); + /* Shift 7-bit address over for lower-level i2c functions */ +- rc = tegra_i2c_read_data(bus, chip << 1, buffer, len); ++ rc = tegra_i2c_read_data(i2c_bus, chip << 1, buffer, len); + if (rc) { + debug("i2c_read_data(): rc=%d\n", rc); + return rc; +@@ -516,132 +421,99 @@ + } + + /* Probe to see if a chip is present. */ +-static int tegra_i2c_probe(struct i2c_adapter *adap, uchar chip) ++static int tegra_i2c_probe_chip(struct udevice *bus, uint chip_addr, ++ uint chip_flags) + { +- struct i2c_bus *bus; ++ struct i2c_bus *i2c_bus = dev_get_priv(bus); + int rc; +- uchar reg; ++ u8 reg; + +- debug("i2c_probe: addr=0x%x\n", chip); +- bus = tegra_i2c_get_bus(adap); +- if (!bus) +- return 1; +- reg = 0; +- rc = i2c_write_data(bus, chip, ®, 1, false); +- if (rc) { +- debug("Error probing 0x%x.\n", chip); +- return 1; +- } +- return 0; ++ /* Shift 7-bit address over for lower-level i2c functions */ ++ rc = tegra_i2c_write_data(i2c_bus, chip_addr << 1, ®, sizeof(reg), ++ false); ++ ++ return rc; + } + +-static int i2c_addr_ok(const uint addr, const int alen) ++static int tegra_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, ++ int nmsgs) + { +- /* We support 7 or 10 bit addresses, so one or two bytes each */ +- return alen == 1 || alen == 2; +-} ++ struct i2c_bus *i2c_bus = dev_get_priv(bus); ++ int ret; + +-/* Read bytes */ +-static int tegra_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, +- int alen, uchar *buffer, int len) +-{ +- struct i2c_bus *bus; +- uint offset; +- int i; +- +- debug("i2c_read: chip=0x%x, addr=0x%x, alen=0x%x len=0x%x\n", +- chip, addr, alen, len); +- bus = tegra_i2c_get_bus(adap); +- if (!bus) +- return 1; +- if (!i2c_addr_ok(addr, alen)) { +- debug("i2c_read: Bad address %x.%d.\n", addr, alen); +- return 1; +- } +- for (offset = 0; offset < len; offset++) { +- if (alen) { +- uchar data[alen]; +- for (i = 0; i < alen; i++) { +- data[alen - i - 1] = +- (addr + offset) >> (8 * i); +- } +- if (i2c_write_data(bus, chip, data, alen, true)) { +- debug("i2c_read: error sending (0x%x)\n", +- addr); +- return 1; +- } ++ debug("i2c_xfer: %d messages\n", nmsgs); ++ for (; nmsgs > 0; nmsgs--, msg++) { ++ bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD); ++ ++ debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len); ++ if (msg->flags & I2C_M_RD) { ++ ret = i2c_read_data(i2c_bus, msg->addr, msg->buf, ++ msg->len); ++ } else { ++ ret = i2c_write_data(i2c_bus, msg->addr, msg->buf, ++ msg->len, next_is_read); + } +- if (i2c_read_data(bus, chip, buffer + offset, 1)) { +- debug("i2c_read: error reading (0x%x)\n", addr); +- return 1; ++ if (ret) { ++ debug("i2c_write: error sending\n"); ++ return -EREMOTEIO; + } + } + + return 0; + } + +-/* Write bytes */ +-static int tegra_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, +- int alen, uchar *buffer, int len) +-{ +- struct i2c_bus *bus; +- uint offset; +- int i; +- +- debug("i2c_write: chip=0x%x, addr=0x%x, alen=0x%x len=0x%x\n", +- chip, addr, alen, len); +- bus = tegra_i2c_get_bus(adap); +- if (!bus) +- return 1; +- if (!i2c_addr_ok(addr, alen)) { +- debug("i2c_write: Bad address %x.%d.\n", addr, alen); +- return 1; +- } +- for (offset = 0; offset < len; offset++) { +- uchar data[alen + 1]; +- for (i = 0; i < alen; i++) +- data[alen - i - 1] = (addr + offset) >> (8 * i); +- data[alen] = buffer[offset]; +- if (i2c_write_data(bus, chip, data, alen + 1, false)) { +- debug("i2c_write: error sending (0x%x)\n", addr); +- return 1; ++int tegra_i2c_get_dvc_bus(struct udevice **busp) ++{ ++ struct udevice *bus; ++ ++ for (uclass_first_device(UCLASS_I2C, &bus); ++ bus; ++ uclass_next_device(&bus)) { ++ if (dev_get_of_data(bus) == TYPE_DVC) { ++ *busp = bus; ++ return 0; + } + } + +- return 0; ++ return -ENODEV; + } + +-int tegra_i2c_get_dvc_bus_num(void) +-{ +- int i; ++static const struct dm_i2c_ops tegra_i2c_ops = { ++ .xfer = tegra_i2c_xfer, ++ .probe_chip = tegra_i2c_probe_chip, ++ .set_bus_speed = tegra_i2c_set_bus_speed, ++}; + +- for (i = 0; i < TEGRA_I2C_NUM_CONTROLLERS; i++) { +- struct i2c_bus *bus = &i2c_controllers[i]; ++static int tegra_i2c_child_pre_probe(struct udevice *dev) ++{ ++ struct dm_i2c_chip *i2c_chip = dev_get_parentdata(dev); + +- if (bus->inited && bus->is_dvc) +- return i; +- } ++ if (dev->of_offset == -1) ++ return 0; ++ return i2c_chip_ofdata_to_platdata(gd->fdt_blob, dev->of_offset, ++ i2c_chip); ++} + +- return -1; ++static int tegra_i2c_ofdata_to_platdata(struct udevice *dev) ++{ ++ return 0; + } + +-/* +- * Register soft i2c adapters +- */ +-U_BOOT_I2C_ADAP_COMPLETE(tegra0, tegra_i2c_init, tegra_i2c_probe, +- tegra_i2c_read, tegra_i2c_write, +- tegra_i2c_set_bus_speed, 100000, 0, 0) +-U_BOOT_I2C_ADAP_COMPLETE(tegra1, tegra_i2c_init, tegra_i2c_probe, +- tegra_i2c_read, tegra_i2c_write, +- tegra_i2c_set_bus_speed, 100000, 0, 1) +-U_BOOT_I2C_ADAP_COMPLETE(tegra2, tegra_i2c_init, tegra_i2c_probe, +- tegra_i2c_read, tegra_i2c_write, +- tegra_i2c_set_bus_speed, 100000, 0, 2) +-U_BOOT_I2C_ADAP_COMPLETE(tegra3, tegra_i2c_init, tegra_i2c_probe, +- tegra_i2c_read, tegra_i2c_write, +- tegra_i2c_set_bus_speed, 100000, 0, 3) +-#if TEGRA_I2C_NUM_CONTROLLERS > 4 +-U_BOOT_I2C_ADAP_COMPLETE(tegra4, tegra_i2c_init, tegra_i2c_probe, +- tegra_i2c_read, tegra_i2c_write, +- tegra_i2c_set_bus_speed, 100000, 0, 4) +-#endif ++static const struct udevice_id tegra_i2c_ids[] = { ++ { .compatible = "nvidia,tegra114-i2c", .data = TYPE_114 }, ++ { .compatible = "nvidia,tegra20-i2c", .data = TYPE_STD }, ++ { .compatible = "nvidia,tegra20-i2c-dvc", .data = TYPE_DVC }, ++ { } ++}; ++ ++U_BOOT_DRIVER(i2c_tegra) = { ++ .name = "i2c_tegra", ++ .id = UCLASS_I2C, ++ .of_match = tegra_i2c_ids, ++ .ofdata_to_platdata = tegra_i2c_ofdata_to_platdata, ++ .probe = tegra_i2c_probe, ++ .per_child_auto_alloc_size = sizeof(struct dm_i2c_chip), ++ .child_pre_probe = tegra_i2c_child_pre_probe, ++ .priv_auto_alloc_size = sizeof(struct i2c_bus), ++ .ops = &tegra_i2c_ops, ++}; +diff -ruN u-boot-2015.01-rc3/drivers/misc/i2c_eeprom.c u-boot/drivers/misc/i2c_eeprom.c +--- u-boot-2015.01-rc3/drivers/misc/i2c_eeprom.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/drivers/misc/i2c_eeprom.c 2015-01-01 17:34:32.649496760 +0100 +@@ -0,0 +1,51 @@ ++/* ++ * Copyright (c) 2014 Google, Inc ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++ ++static int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf, ++ int size) ++{ ++ return -ENODEV; ++} ++ ++static int i2c_eeprom_write(struct udevice *dev, int offset, ++ const uint8_t *buf, int size) ++{ ++ return -ENODEV; ++} ++ ++struct i2c_eeprom_ops i2c_eeprom_std_ops = { ++ .read = i2c_eeprom_read, ++ .write = i2c_eeprom_write, ++}; ++ ++int i2c_eeprom_std_probe(struct udevice *dev) ++{ ++ return 0; ++} ++ ++static const struct udevice_id i2c_eeprom_std_ids[] = { ++ { .compatible = "i2c-eeprom" }, ++ { } ++}; ++ ++U_BOOT_DRIVER(i2c_eeprom_std) = { ++ .name = "i2c_eeprom", ++ .id = UCLASS_I2C_EEPROM, ++ .of_match = i2c_eeprom_std_ids, ++ .probe = i2c_eeprom_std_probe, ++ .priv_auto_alloc_size = sizeof(struct i2c_eeprom), ++ .ops = &i2c_eeprom_std_ops, ++}; ++ ++UCLASS_DRIVER(i2c_eeprom) = { ++ .id = UCLASS_I2C_EEPROM, ++ .name = "i2c_eeprom", ++}; +diff -ruN u-boot-2015.01-rc3/drivers/misc/i2c_eeprom_emul.c u-boot/drivers/misc/i2c_eeprom_emul.c +--- u-boot-2015.01-rc3/drivers/misc/i2c_eeprom_emul.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/drivers/misc/i2c_eeprom_emul.c 2015-01-01 17:34:32.649496760 +0100 +@@ -0,0 +1,168 @@ ++/* ++ * Simulate an I2C eeprom ++ * ++ * Copyright (c) 2014 Google, Inc ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#ifdef DEBUG ++#define debug_buffer print_buffer ++#else ++#define debug_buffer(x, ...) ++#endif ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++struct sandbox_i2c_flash_plat_data { ++ enum sandbox_i2c_eeprom_test_mode test_mode; ++ const char *filename; ++ int offset_len; /* Length of an offset in bytes */ ++ int size; /* Size of data buffer */ ++}; ++ ++struct sandbox_i2c_flash { ++ uint8_t *data; ++}; ++ ++void sandbox_i2c_eeprom_set_test_mode(struct udevice *dev, ++ enum sandbox_i2c_eeprom_test_mode mode) ++{ ++ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev); ++ ++ plat->test_mode = mode; ++} ++ ++void sandbox_i2c_eeprom_set_offset_len(struct udevice *dev, int offset_len) ++{ ++ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev); ++ ++ plat->offset_len = offset_len; ++} ++ ++static int sandbox_i2c_eeprom_xfer(struct udevice *emul, struct i2c_msg *msg, ++ int nmsgs) ++{ ++ struct sandbox_i2c_flash *priv = dev_get_priv(emul); ++ uint offset = 0; ++ ++ debug("\n%s\n", __func__); ++ debug_buffer(0, priv->data, 1, 16, 0); ++ for (; nmsgs > 0; nmsgs--, msg++) { ++ struct sandbox_i2c_flash_plat_data *plat = ++ dev_get_platdata(emul); ++ int len; ++ u8 *ptr; ++ ++ if (!plat->size) ++ return -ENODEV; ++ if (msg->addr + msg->len > plat->size) { ++ debug("%s: Address %x, len %x is outside range 0..%x\n", ++ __func__, msg->addr, msg->len, plat->size); ++ return -EINVAL; ++ } ++ len = msg->len; ++ debug(" %s: msg->len=%d", ++ msg->flags & I2C_M_RD ? "read" : "write", ++ msg->len); ++ if (msg->flags & I2C_M_RD) { ++ if (plat->test_mode == SIE_TEST_MODE_SINGLE_BYTE) ++ len = 1; ++ debug(", offset %x, len %x: ", offset, len); ++ memcpy(msg->buf, priv->data + offset, len); ++ memset(msg->buf + len, '\xff', msg->len - len); ++ debug_buffer(0, msg->buf, 1, msg->len, 0); ++ } else if (len >= plat->offset_len) { ++ int i; ++ ++ ptr = msg->buf; ++ for (i = 0; i < plat->offset_len; i++, len--) ++ offset = (offset << 8) | *ptr++; ++ debug(", set offset %x: ", offset); ++ debug_buffer(0, msg->buf, 1, msg->len, 0); ++ if (plat->test_mode == SIE_TEST_MODE_SINGLE_BYTE) ++ len = min(len, 1); ++ ++ /* For testing, map offsets into our limited buffer */ ++ for (i = 24; i > 0; i -= 8) { ++ if (offset > (1 << i)) { ++ offset = (offset >> i) | ++ (offset & ((1 << i) - 1)); ++ offset += i; ++ } ++ } ++ memcpy(priv->data + offset, ptr, len); ++ } ++ } ++ debug_buffer(0, priv->data, 1, 16, 0); ++ ++ return 0; ++} ++ ++struct dm_i2c_ops sandbox_i2c_emul_ops = { ++ .xfer = sandbox_i2c_eeprom_xfer, ++}; ++ ++static int sandbox_i2c_eeprom_ofdata_to_platdata(struct udevice *dev) ++{ ++ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev); ++ ++ plat->size = fdtdec_get_int(gd->fdt_blob, dev->of_offset, ++ "sandbox,size", 32); ++ plat->filename = fdt_getprop(gd->fdt_blob, dev->of_offset, ++ "sandbox,filename", NULL); ++ if (!plat->filename) { ++ debug("%s: No filename for device '%s'\n", __func__, ++ dev->name); ++ return -EINVAL; ++ } ++ plat->test_mode = SIE_TEST_MODE_NONE; ++ plat->offset_len = 1; ++ ++ return 0; ++} ++ ++static int sandbox_i2c_eeprom_probe(struct udevice *dev) ++{ ++ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev); ++ struct sandbox_i2c_flash *priv = dev_get_priv(dev); ++ ++ priv->data = calloc(1, plat->size); ++ if (!priv->data) ++ return -ENOMEM; ++ ++ return 0; ++} ++ ++static int sandbox_i2c_eeprom_remove(struct udevice *dev) ++{ ++ struct sandbox_i2c_flash *priv = dev_get_priv(dev); ++ ++ free(priv->data); ++ ++ return 0; ++} ++ ++static const struct udevice_id sandbox_i2c_ids[] = { ++ { .compatible = "sandbox,i2c-eeprom" }, ++ { } ++}; ++ ++U_BOOT_DRIVER(sandbox_i2c_emul) = { ++ .name = "sandbox_i2c_eeprom_emul", ++ .id = UCLASS_I2C_EMUL, ++ .of_match = sandbox_i2c_ids, ++ .ofdata_to_platdata = sandbox_i2c_eeprom_ofdata_to_platdata, ++ .probe = sandbox_i2c_eeprom_probe, ++ .remove = sandbox_i2c_eeprom_remove, ++ .priv_auto_alloc_size = sizeof(struct sandbox_i2c_flash), ++ .platdata_auto_alloc_size = sizeof(struct sandbox_i2c_flash_plat_data), ++ .ops = &sandbox_i2c_emul_ops, ++}; +diff -ruN u-boot-2015.01-rc3/drivers/misc/Makefile u-boot/drivers/misc/Makefile +--- u-boot-2015.01-rc3/drivers/misc/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/misc/Makefile 2015-01-01 17:34:32.649496760 +0100 +@@ -15,11 +15,16 @@ + obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o + obj-$(CONFIG_FSL_IIM) += fsl_iim.o + obj-$(CONFIG_GPIO_LED) += gpio_led.o ++obj-$(CONFIG_I2C_EEPROM) += i2c_eeprom.o + obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o + obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o + obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o + obj-$(CONFIG_NS87308) += ns87308.o + obj-$(CONFIG_PDSP188x) += pdsp188x.o ++ifdef CONFIG_DM_I2C ++obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o ++endif ++obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o + obj-$(CONFIG_STATUS_LED) += status_led.o + obj-$(CONFIG_TWL4030_LED) += twl4030_led.o + obj-$(CONFIG_FSL_IFC) += fsl_ifc.o +diff -ruN u-boot-2015.01-rc3/drivers/misc/mxc_ocotp.c u-boot/drivers/misc/mxc_ocotp.c +--- u-boot-2015.01-rc3/drivers/misc/mxc_ocotp.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/misc/mxc_ocotp.c 2015-01-01 17:34:32.649496760 +0100 +@@ -81,8 +81,6 @@ + err = !!(readl(®s->ctrl) & BM_CTRL_ERROR); + clear_error(regs); + +- enable_ocotp_clk(0); +- + if (err) { + printf("mxc_ocotp %s(): Access protect error\n", caller); + return -EIO; +diff -ruN u-boot-2015.01-rc3/drivers/misc/mxs_ocotp.c u-boot/drivers/misc/mxs_ocotp.c +--- u-boot-2015.01-rc3/drivers/misc/mxs_ocotp.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/misc/mxs_ocotp.c 2015-01-01 17:34:32.649496760 +0100 +@@ -187,6 +187,8 @@ + uint32_t hclk_val, vddio_val; + int ret; + ++ mxs_ocotp_clear_error(); ++ + /* Make sure the banks are closed for reading. */ + ret = mxs_ocotp_read_bank_open(0); + if (ret) { +@@ -221,13 +223,17 @@ + goto fail; + } + ++ /* Check for errors */ ++ if (readl(&ocotp_regs->hw_ocotp_ctrl) & OCOTP_CTRL_ERROR) { ++ puts("Failed writing fuses!\n"); ++ ret = -EPERM; ++ goto fail; ++ } ++ + fail: + mxs_ocotp_scale_vddio(0, &vddio_val); +- ret = mxs_ocotp_scale_hclk(0, &hclk_val); +- if (ret) { ++ if (mxs_ocotp_scale_hclk(0, &hclk_val)) + puts("Failed scaling up the HCLK!\n"); +- return ret; +- } + + return ret; + } +diff -ruN u-boot-2015.01-rc3/drivers/misc/smsc_lpc47m.c u-boot/drivers/misc/smsc_lpc47m.c +--- u-boot-2015.01-rc3/drivers/misc/smsc_lpc47m.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/drivers/misc/smsc_lpc47m.c 2015-01-01 17:34:32.649496760 +0100 +@@ -0,0 +1,33 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++ ++static void pnp_enter_conf_state(u16 dev) ++{ ++ u16 port = dev >> 8; ++ ++ outb(0x55, port); ++} ++ ++static void pnp_exit_conf_state(u16 dev) ++{ ++ u16 port = dev >> 8; ++ ++ outb(0xaa, port); ++} ++ ++void lpc47m_enable_serial(u16 dev, u16 iobase) ++{ ++ pnp_enter_conf_state(dev); ++ pnp_set_logical_device(dev); ++ pnp_set_enable(dev, 0); ++ pnp_set_iobase(dev, PNP_IDX_IO0, iobase); ++ pnp_set_enable(dev, 1); ++ pnp_exit_conf_state(dev); ++} +diff -ruN u-boot-2015.01-rc3/drivers/mmc/dw_mmc.c u-boot/drivers/mmc/dw_mmc.c +--- u-boot-2015.01-rc3/drivers/mmc/dw_mmc.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/mmc/dw_mmc.c 2015-01-01 17:34:32.653496694 +0100 +@@ -318,7 +318,7 @@ + dwmci_writel(host, DWMCI_CTYPE, ctype); + + regs = dwmci_readl(host, DWMCI_UHS_REG); +- if (mmc->card_caps & MMC_MODE_DDR_52MHz) ++ if (mmc->ddr_mode) + regs |= DWMCI_DDR_MODE; + else + regs &= DWMCI_DDR_MODE; +diff -ruN u-boot-2015.01-rc3/drivers/mmc/exynos_dw_mmc.c u-boot/drivers/mmc/exynos_dw_mmc.c +--- u-boot-2015.01-rc3/drivers/mmc/exynos_dw_mmc.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/mmc/exynos_dw_mmc.c 2015-01-01 17:34:32.653496694 +0100 +@@ -101,7 +101,7 @@ + host->get_mmc_clk = exynos_dwmci_get_clk; + /* Add the mmc channel to be registered with mmc core */ + if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) { +- debug("dwmmc%d registration failed\n", index); ++ printf("DWMMC%d registration failed\n", index); + return -1; + } + return 0; +@@ -146,7 +146,7 @@ + flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE; + err = exynos_pinmux_config(host->dev_id, flag); + if (err) { +- debug("DWMMC not configure\n"); ++ printf("DWMMC%d not configure\n", index); + return err; + } + +@@ -162,21 +162,22 @@ + /* Extract device id for each mmc channel */ + host->dev_id = pinmux_decode_periph_id(blob, node); + ++ host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id); ++ if (host->dev_index == host->dev_id) ++ host->dev_index = host->dev_id - PERIPH_ID_SDMMC0; ++ ++ + /* Get the bus width from the device node */ + host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 0); + if (host->buswidth <= 0) { +- debug("DWMMC: Can't get bus-width\n"); ++ printf("DWMMC%d: Can't get bus-width\n", host->dev_index); + return -EINVAL; + } + +- host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id); +- if (host->dev_index == host->dev_id) +- host->dev_index = host->dev_id - PERIPH_ID_SDMMC0; +- + /* Set the base address from the device node */ + base = fdtdec_get_addr(blob, node, "reg"); + if (!base) { +- debug("DWMMC: Can't get base address\n"); ++ printf("DWMMC%d: Can't get base address\n", host->dev_index); + return -EINVAL; + } + host->ioaddr = (void *)base; +@@ -184,7 +185,8 @@ + /* Extract the timing info from the node */ + err = fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3); + if (err) { +- debug("Can't get sdr-timings for devider\n"); ++ printf("DWMMC%d: Can't get sdr-timings for devider\n", ++ host->dev_index); + return -EINVAL; + } + +@@ -214,7 +216,7 @@ + host = &dwmci_host[i]; + err = exynos_dwmci_get_config(blob, node, host); + if (err) { +- debug("%s: failed to decode dev %d\n", __func__, i); ++ printf("%s: failed to decode dev %d\n", __func__, i); + return err; + } + +diff -ruN u-boot-2015.01-rc3/drivers/mmc/mmc.c u-boot/drivers/mmc/mmc.c +--- u-boot-2015.01-rc3/drivers/mmc/mmc.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/mmc/mmc.c 2015-01-01 17:34:32.653496694 +0100 +@@ -159,7 +159,7 @@ + { + struct mmc_cmd cmd; + +- if (mmc->card_caps & MMC_MODE_DDR_52MHz) ++ if (mmc->ddr_mode) + return 0; + + cmd.cmdidx = MMC_CMD_SET_BLOCKLEN; +@@ -486,7 +486,7 @@ + char cardtype; + int err; + +- mmc->card_caps = 0; ++ mmc->card_caps = MMC_MODE_4BIT | MMC_MODE_8BIT; + + if (mmc_host_is_spi(mmc)) + return 0; +@@ -519,7 +519,7 @@ + + /* High Speed is set, there are two types: 52MHz and 26MHz */ + if (cardtype & EXT_CSD_CARD_TYPE_52) { +- if (cardtype & EXT_CSD_CARD_TYPE_DDR_52) ++ if (cardtype & EXT_CSD_CARD_TYPE_DDR_1_8V) + mmc->card_caps |= MMC_MODE_DDR_52MHz; + mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; + } else { +@@ -1001,6 +1001,9 @@ + case 6: + mmc->version = MMC_VERSION_4_5; + break; ++ case 7: ++ mmc->version = MMC_VERSION_5_0; ++ break; + } + + /* +@@ -1022,6 +1025,21 @@ + mmc->erase_grp_size = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * + MMC_MAX_BLOCK_LEN * 1024; ++ /* ++ * if high capacity and partition setting completed ++ * SEC_COUNT is valid even if it is smaller than 2 GiB ++ * JEDEC Standard JESD84-B45, 6.2.4 ++ */ ++ if (mmc->high_capacity && ++ (ext_csd[EXT_CSD_PARTITION_SETTING] & ++ EXT_CSD_PARTITION_SETTING_COMPLETED)) { ++ capacity = (ext_csd[EXT_CSD_SEC_CNT]) | ++ (ext_csd[EXT_CSD_SEC_CNT + 1] << 8) | ++ (ext_csd[EXT_CSD_SEC_CNT + 2] << 16) | ++ (ext_csd[EXT_CSD_SEC_CNT + 3] << 24); ++ capacity *= MMC_MAX_BLOCK_LEN; ++ mmc->capacity_user = capacity; ++ } + } else { + /* Calculate the group size from the csd value. */ + int erase_gsz, erase_gmul; +@@ -1103,8 +1121,10 @@ + + /* An array to map CSD bus widths to host cap bits */ + static unsigned ext_to_hostcaps[] = { +- [EXT_CSD_DDR_BUS_WIDTH_4] = MMC_MODE_DDR_52MHz, +- [EXT_CSD_DDR_BUS_WIDTH_8] = MMC_MODE_DDR_52MHz, ++ [EXT_CSD_DDR_BUS_WIDTH_4] = ++ MMC_MODE_DDR_52MHz | MMC_MODE_4BIT, ++ [EXT_CSD_DDR_BUS_WIDTH_8] = ++ MMC_MODE_DDR_52MHz | MMC_MODE_8BIT, + [EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT, + [EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT, + }; +@@ -1116,13 +1136,13 @@ + + for (idx=0; idx < ARRAY_SIZE(ext_csd_bits); idx++) { + unsigned int extw = ext_csd_bits[idx]; ++ unsigned int caps = ext_to_hostcaps[extw]; + + /* +- * Check to make sure the controller supports +- * this bus width, if it's more than 1 ++ * Check to make sure the card and controller support ++ * these capabilities + */ +- if (extw != EXT_CSD_BUS_WIDTH_1 && +- !(mmc->cfg->host_caps & ext_to_hostcaps[extw])) ++ if ((mmc->card_caps & caps) != caps) + continue; + + err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, +@@ -1131,26 +1151,33 @@ + if (err) + continue; + ++ mmc->ddr_mode = (caps & MMC_MODE_DDR_52MHz) ? 1 : 0; + mmc_set_bus_width(mmc, widths[idx]); + + err = mmc_send_ext_csd(mmc, test_csd); +- /* Only compare read only fields */ +- if (!err && ext_csd[EXT_CSD_PARTITIONING_SUPPORT] \ +- == test_csd[EXT_CSD_PARTITIONING_SUPPORT] +- && ext_csd[EXT_CSD_HC_WP_GRP_SIZE] \ +- == test_csd[EXT_CSD_HC_WP_GRP_SIZE] \ +- && ext_csd[EXT_CSD_REV] \ +- == test_csd[EXT_CSD_REV] +- && ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] \ +- == test_csd[EXT_CSD_HC_ERASE_GRP_SIZE] +- && memcmp(&ext_csd[EXT_CSD_SEC_CNT], \ +- &test_csd[EXT_CSD_SEC_CNT], 4) == 0) { + +- mmc->card_caps |= ext_to_hostcaps[extw]; ++ if (err) ++ continue; ++ ++ /* Only compare read only fields */ ++ if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT] ++ == test_csd[EXT_CSD_PARTITIONING_SUPPORT] && ++ ext_csd[EXT_CSD_HC_WP_GRP_SIZE] ++ == test_csd[EXT_CSD_HC_WP_GRP_SIZE] && ++ ext_csd[EXT_CSD_REV] ++ == test_csd[EXT_CSD_REV] && ++ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] ++ == test_csd[EXT_CSD_HC_ERASE_GRP_SIZE] && ++ memcmp(&ext_csd[EXT_CSD_SEC_CNT], ++ &test_csd[EXT_CSD_SEC_CNT], 4) == 0) + break; +- } ++ else ++ err = SWITCH_ERR; + } + ++ if (err) ++ return err; ++ + if (mmc->card_caps & MMC_MODE_HS) { + if (mmc->card_caps & MMC_MODE_HS_52MHz) + mmc->tran_speed = 52000000; +@@ -1161,6 +1188,12 @@ + + mmc_set_clock(mmc, mmc->tran_speed); + ++ /* Fix the block length for DDR mode */ ++ if (mmc->ddr_mode) { ++ mmc->read_bl_len = MMC_MAX_BLOCK_LEN; ++ mmc->write_bl_len = MMC_MAX_BLOCK_LEN; ++ } ++ + /* fill in device description */ + mmc->block_dev.lun = 0; + mmc->block_dev.type = 0; +@@ -1306,6 +1339,7 @@ + if (err) + return err; + ++ mmc->ddr_mode = 0; + mmc_set_bus_width(mmc, 1); + mmc_set_clock(mmc, 1); + +@@ -1408,8 +1442,11 @@ + + printf("%s: %d", m->cfg->name, m->block_dev.dev); + +- if (entry->next != &mmc_devices) +- printf("%c ", separator); ++ if (entry->next != &mmc_devices) { ++ printf("%c", separator); ++ if (separator != '\n') ++ puts (" "); ++ } + } + + printf("\n"); +diff -ruN u-boot-2015.01-rc3/drivers/mtd/nand/fsl_ifc_nand.c u-boot/drivers/mtd/nand/fsl_ifc_nand.c +--- u-boot-2015.01-rc3/drivers/mtd/nand/fsl_ifc_nand.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/mtd/nand/fsl_ifc_nand.c 2015-01-01 17:34:32.657496629 +0100 +@@ -292,7 +292,7 @@ + struct fsl_ifc *ifc = ctrl->regs; + u32 timeo = (CONFIG_SYS_HZ * 10) / 1000; + u32 time_start; +- u32 eccstat[4]; ++ u32 eccstat[4] = {0}; + int i; + + /* set the chip select for NAND Transaction */ +diff -ruN u-boot-2015.01-rc3/drivers/mtd/nand/fsl_ifc_spl.c u-boot/drivers/mtd/nand/fsl_ifc_spl.c +--- u-boot-2015.01-rc3/drivers/mtd/nand/fsl_ifc_spl.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/mtd/nand/fsl_ifc_spl.c 2015-01-01 17:34:32.657496629 +0100 +@@ -254,3 +254,13 @@ + uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; + uboot(); + } ++ ++#ifndef CONFIG_SPL_NAND_INIT ++void nand_init(void) ++{ ++} ++ ++void nand_deselect(void) ++{ ++} ++#endif +diff -ruN u-boot-2015.01-rc3/drivers/mtd/spi/sf_internal.h u-boot/drivers/mtd/spi/sf_internal.h +--- u-boot-2015.01-rc3/drivers/mtd/spi/sf_internal.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/mtd/spi/sf_internal.h 2015-01-01 17:34:32.665496498 +0100 +@@ -23,13 +23,16 @@ + /* Enum list - Full read commands */ + enum spi_read_cmds { + ARRAY_SLOW = 1 << 0, +- DUAL_OUTPUT_FAST = 1 << 1, +- DUAL_IO_FAST = 1 << 2, +- QUAD_OUTPUT_FAST = 1 << 3, +- QUAD_IO_FAST = 1 << 4, ++ ARRAY_FAST = 1 << 1, ++ DUAL_OUTPUT_FAST = 1 << 2, ++ DUAL_IO_FAST = 1 << 3, ++ QUAD_OUTPUT_FAST = 1 << 4, ++ QUAD_IO_FAST = 1 << 5, + }; + +-#define RD_EXTN (ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST) ++/* Normal - Extended - Full command set */ ++#define RD_NORM (ARRAY_SLOW | ARRAY_FAST) ++#define RD_EXTN (RD_NORM | DUAL_OUTPUT_FAST | DUAL_IO_FAST) + #define RD_FULL (RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST) + + /* sf param flags */ +@@ -37,9 +40,13 @@ + SECT_4K = 1 << 0, + SECT_32K = 1 << 1, + E_FSR = 1 << 2, +- WR_QPP = 1 << 3, ++ SST_BP = 1 << 3, ++ SST_WP = 1 << 4, ++ WR_QPP = 1 << 5, + }; + ++#define SST_WR (SST_BP | SST_WP) ++ + #define SPI_FLASH_3B_ADDR_LEN 3 + #define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN) + #define SPI_FLASH_16MB_BOUN 0x1000000 +@@ -101,12 +108,13 @@ + + /* SST specific */ + #ifdef CONFIG_SPI_FLASH_SST +-# define SST_WP 0x01 /* Supports AAI word program */ + # define CMD_SST_BP 0x02 /* Byte Program */ + # define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */ + + int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, + const void *buf); ++int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len, ++ const void *buf); + #endif + + /** +diff -ruN u-boot-2015.01-rc3/drivers/mtd/spi/sf_ops.c u-boot/drivers/mtd/spi/sf_ops.c +--- u-boot-2015.01-rc3/drivers/mtd/spi/sf_ops.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/mtd/spi/sf_ops.c 2015-01-01 17:34:32.665496498 +0100 +@@ -517,4 +517,35 @@ + spi_release_bus(flash->spi); + return ret; + } ++ ++int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len, ++ const void *buf) ++{ ++ size_t actual; ++ int ret; ++ ++ ret = spi_claim_bus(flash->spi); ++ if (ret) { ++ debug("SF: Unable to claim SPI bus\n"); ++ return ret; ++ } ++ ++ for (actual = 0; actual < len; actual++) { ++ ret = sst_byte_write(flash, offset, buf + actual); ++ if (ret) { ++ debug("SF: sst byte program failed\n"); ++ break; ++ } ++ offset++; ++ } ++ ++ if (!ret) ++ ret = spi_flash_cmd_write_disable(flash); ++ ++ debug("SF: sst: program %s %zu bytes @ 0x%zx\n", ++ ret ? "failure" : "success", len, offset - actual); ++ ++ spi_release_bus(flash->spi); ++ return ret; ++} + #endif +diff -ruN u-boot-2015.01-rc3/drivers/mtd/spi/sf_params.c u-boot/drivers/mtd/spi/sf_params.c +--- u-boot-2015.01-rc3/drivers/mtd/spi/sf_params.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/mtd/spi/sf_params.c 2015-01-01 17:34:32.665496498 +0100 +@@ -15,42 +15,42 @@ + /* SPI/QSPI flash device params structure */ + const struct spi_flash_params spi_flash_params_table[] = { + #ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */ +- {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, 0, SECT_4K}, +- {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, 0, SECT_4K}, +- {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, 0, SECT_4K}, +- {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, 0, SECT_4K}, +- {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, 0, SECT_4K}, +- {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, 0, SECT_4K}, +- {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, 0, SECT_4K}, +- {"AT25DF321", 0x1f4701, 0x0, 64 * 1024, 64, 0, SECT_4K}, ++ {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, RD_NORM, SECT_4K}, ++ {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K}, ++ {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K}, ++ {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K}, ++ {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, RD_NORM, SECT_4K}, ++ {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K}, ++ {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K}, ++ {"AT25DF321", 0x1f4701, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K}, + #endif + #ifdef CONFIG_SPI_FLASH_EON /* EON */ +- {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, 0, 0}, +- {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, 0, SECT_4K}, +- {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, 0, 0}, +- {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, 0, 0}, ++ {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, RD_NORM, 0}, ++ {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K}, ++ {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, RD_NORM, 0}, ++ {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, RD_NORM, 0}, + #endif + #ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */ +- {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, 0, SECT_4K}, +- {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, 0, SECT_4K}, ++ {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K}, ++ {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K}, + #endif + #ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */ +- {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, 0, 0}, +- {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, 0, 0}, +- {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, 0, 0}, +- {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0, 0}, +- {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, 0, 0}, +- {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0, 0}, ++ {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, RD_NORM, 0}, ++ {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, RD_NORM, 0}, ++ {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, RD_NORM, 0}, ++ {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, RD_NORM, 0}, ++ {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, RD_NORM, 0}, ++ {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, RD_NORM, 0}, + {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP}, + {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP}, + {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP}, + {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP}, + #endif + #ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */ +- {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, 0, 0}, +- {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, 0, 0}, +- {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, 0, 0}, +- {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, 0, 0}, ++ {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, RD_NORM, 0}, ++ {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, RD_NORM, 0}, ++ {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, RD_NORM, 0}, ++ {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, RD_NORM, 0}, + {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, RD_FULL, WR_QPP}, + {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, RD_FULL, WR_QPP}, + {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, RD_FULL, WR_QPP}, +@@ -64,17 +64,17 @@ + {"S25FL512S_512K", 0x010220, 0x4f00, 256 * 1024, 256, RD_FULL, WR_QPP}, + #endif + #ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */ +- {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0, 0}, +- {"M25P20", 0x202012, 0x0, 64 * 1024, 4, 0, 0}, +- {"M25P40", 0x202013, 0x0, 64 * 1024, 8, 0, 0}, +- {"M25P80", 0x202014, 0x0, 64 * 1024, 16, 0, 0}, +- {"M25P16", 0x202015, 0x0, 64 * 1024, 32, 0, 0}, +- {"M25PE16", 0x208015, 0x1000, 64 * 1024, 32, 0, 0}, ++ {"M25P10", 0x202011, 0x0, 32 * 1024, 4, RD_NORM, 0}, ++ {"M25P20", 0x202012, 0x0, 64 * 1024, 4, RD_NORM, 0}, ++ {"M25P40", 0x202013, 0x0, 64 * 1024, 8, RD_NORM, 0}, ++ {"M25P80", 0x202014, 0x0, 64 * 1024, 16, RD_NORM, 0}, ++ {"M25P16", 0x202015, 0x0, 64 * 1024, 32, RD_NORM, 0}, ++ {"M25PE16", 0x208015, 0x1000, 64 * 1024, 32, RD_NORM, 0}, + {"M25PX16", 0x207115, 0x1000, 64 * 1024, 32, RD_EXTN, 0}, +- {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0, 0}, +- {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0, 0}, +- {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0, 0}, +- {"M25PX64", 0x207117, 0x0, 64 * 1024, 128, 0, SECT_4K}, ++ {"M25P32", 0x202016, 0x0, 64 * 1024, 64, RD_NORM, 0}, ++ {"M25P64", 0x202017, 0x0, 64 * 1024, 128, RD_NORM, 0}, ++ {"M25P128", 0x202018, 0x0, 256 * 1024, 64, RD_NORM, 0}, ++ {"M25PX64", 0x207117, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K}, + {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, +@@ -89,25 +89,25 @@ + {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K}, + #endif + #ifdef CONFIG_SPI_FLASH_SST /* SST */ +- {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, 0, SECT_4K | SST_WP}, +- {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, 0, SECT_4K | SST_WP}, +- {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, 0, SECT_4K | SST_WP}, +- {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, 0, SECT_4K | SST_WP}, +- {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, 0, SECT_4K}, +- {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, 0, SECT_4K | SST_WP}, +- {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, 0, SECT_4K | SST_WP}, +- {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, 0, SECT_4K | SST_WP}, +- {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, 0, SECT_4K | SST_WP}, +- {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, 0, SECT_4K | SST_WP}, ++ {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K | SST_WR}, ++ {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K | SST_WR}, ++ {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, RD_NORM, SECT_4K | SST_WR}, ++ {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K | SST_WR}, ++ {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K}, ++ {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, RD_NORM, SECT_4K | SST_WR}, ++ {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, RD_NORM, SECT_4K | SST_WR}, ++ {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, RD_NORM, SECT_4K | SST_WR}, ++ {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K | SST_WR}, ++ {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K | SST_WR}, + #endif + #ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */ +- {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, 0, 0}, +- {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, 0, 0}, +- {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, 0, 0}, +- {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, 0, SECT_4K}, +- {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, 0, SECT_4K}, +- {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, 0, SECT_4K}, +- {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, 0, SECT_4K}, ++ {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, RD_NORM, 0}, ++ {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, RD_NORM, 0}, ++ {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, RD_NORM, 0}, ++ {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K}, ++ {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, RD_NORM, SECT_4K}, ++ {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K}, ++ {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K}, + {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, +diff -ruN u-boot-2015.01-rc3/drivers/mtd/spi/sf_probe.c u-boot/drivers/mtd/spi/sf_probe.c +--- u-boot-2015.01-rc3/drivers/mtd/spi/sf_probe.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/mtd/spi/sf_probe.c 2015-01-01 17:34:32.665496498 +0100 +@@ -24,6 +24,7 @@ + /* Read commands array */ + static u8 spi_read_cmds_array[] = { + CMD_READ_ARRAY_SLOW, ++ CMD_READ_ARRAY_FAST, + CMD_READ_DUAL_OUTPUT_FAST, + CMD_READ_DUAL_IO_FAST, + CMD_READ_QUAD_OUTPUT_FAST, +@@ -135,8 +136,12 @@ + #ifndef CONFIG_DM_SPI_FLASH + flash->write = spi_flash_cmd_write_ops; + #if defined(CONFIG_SPI_FLASH_SST) +- if (params->flags & SST_WP) +- flash->write = sst_write_wp; ++ if (params->flags & SST_WR) { ++ if (flash->spi->op_mode_tx & SPI_OPM_TX_BP) ++ flash->write = sst_write_bp; ++ else ++ flash->write = sst_write_wp; ++ } + #endif + flash->erase = spi_flash_cmd_erase_ops; + flash->read = spi_flash_cmd_read_ops; +diff -ruN u-boot-2015.01-rc3/drivers/net/fm/init.c u-boot/drivers/net/fm/init.c +--- u-boot-2015.01-rc3/drivers/net/fm/init.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/net/fm/init.c 2015-01-01 17:34:32.677496300 +0100 +@@ -247,17 +247,17 @@ + } + + #ifdef CONFIG_SYS_FMAN_V3 ++#ifndef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION + /* +- * Physically FM1_DTSEC9 and FM1_10GEC1 use the same dual-role MAC, when +- * FM1_10GEC1 is enabled and FM1_DTSEC9 is disabled, ensure that the +- * dual-role MAC is not disabled, ditto for other dual-role MACs. ++ * On T2/T4 SoCs, physically FM1_DTSEC9 and FM1_10GEC1 use the same ++ * dual-role MAC, when FM1_10GEC1 is enabled and FM1_DTSEC9 ++ * is disabled, ensure that the dual-role MAC is not disabled, ++ * ditto for other dual-role MACs. + */ + if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) || + ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) || +- ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC1))) || + ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3))) || + ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4))) || +- ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC1))) || + ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) || + ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) || + ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1))) || +@@ -269,6 +269,17 @@ + ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9))) || + ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10))) + #endif ++#else ++ /* FM1_DTSECx and FM1_10GECx use the same dual-role MAC */ ++ if (((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC1))) || ++ ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC2))) || ++ ((info->port == FM1_DTSEC3) && (PORT_IS_ENABLED(FM1_10GEC3))) || ++ ((info->port == FM1_DTSEC4) && (PORT_IS_ENABLED(FM1_10GEC4))) || ++ ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC1))) || ++ ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC2))) || ++ ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC3))) || ++ ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC4))) ++#endif + ) + return; + #endif +diff -ruN u-boot-2015.01-rc3/drivers/pci/Makefile u-boot/drivers/pci/Makefile +--- u-boot-2015.01-rc3/drivers/pci/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/pci/Makefile 2015-01-01 17:34:32.685496170 +0100 +@@ -17,3 +17,4 @@ + obj-$(CONFIG_SH7780_PCI) +=pci_sh7780.o + obj-$(CONFIG_TSI108_PCI) += tsi108_pci.o + obj-$(CONFIG_WINBOND_83C553) += w83c553f.o ++obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape.o +diff -ruN u-boot-2015.01-rc3/drivers/pci/pcie_layerscape.c u-boot/drivers/pci/pcie_layerscape.c +--- u-boot-2015.01-rc3/drivers/pci/pcie_layerscape.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/drivers/pci/pcie_layerscape.c 2015-01-01 17:34:32.689496104 +0100 +@@ -0,0 +1,51 @@ ++/* ++ * Copyright 2014 Freescale Semiconductor, Inc. ++ * Layerscape PCIe driver ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_OF_BOARD_SETUP ++#include ++#include ++ ++static void ft_pcie_ls_setup(void *blob, const char *pci_compat, ++ unsigned long ctrl_addr, enum srds_prtcl dev) ++{ ++ int off; ++ ++ off = fdt_node_offset_by_compat_reg(blob, pci_compat, ++ (phys_addr_t)ctrl_addr); ++ if (off < 0) ++ return; ++ ++ if (!is_serdes_configured(dev)) ++ fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); ++} ++ ++void ft_pcie_setup(void *blob, bd_t *bd) ++{ ++ #ifdef CONFIG_PCIE1 ++ ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE1_ADDR, PCIE1); ++ #endif ++ ++ #ifdef CONFIG_PCIE2 ++ ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE2_ADDR, PCIE2); ++ #endif ++} ++ ++#else ++void ft_pcie_setup(void *blob, bd_t *bd) ++{ ++} ++#endif ++ ++void pci_init_board(void) ++{ ++} +diff -ruN u-boot-2015.01-rc3/drivers/power/tps6586x.c u-boot/drivers/power/tps6586x.c +--- u-boot-2015.01-rc3/drivers/power/tps6586x.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/power/tps6586x.c 2015-01-01 17:34:32.693496038 +0100 +@@ -10,9 +10,7 @@ + #include + #include + +-static int bus_num; /* I2C bus we are on */ +-#define I2C_ADDRESS 0x34 /* chip requires this address */ +-static char inited; /* 1 if we have been inited */ ++static struct udevice *tps6586x_dev; + + enum { + /* Registers that we access */ +@@ -37,13 +35,9 @@ + int i; + uchar data; + int retval = -1; +- int old_bus_num; +- +- old_bus_num = i2c_get_bus_num(); +- i2c_set_bus_num(bus_num); + + for (i = 0; i < MAX_I2C_RETRY; ++i) { +- if (!i2c_read(I2C_ADDRESS, reg, 1, &data, 1)) { ++ if (!i2c_read(tps6586x_dev, reg, &data, 1)) { + retval = (int)data; + goto exit; + } +@@ -53,7 +47,6 @@ + } + + exit: +- i2c_set_bus_num(old_bus_num); + debug("pmu_read %x=%x\n", reg, retval); + if (retval < 0) + debug("%s: failed to read register %#x: %d\n", __func__, reg, +@@ -65,13 +58,9 @@ + { + int i; + int retval = -1; +- int old_bus_num; +- +- old_bus_num = i2c_get_bus_num(); +- i2c_set_bus_num(bus_num); + + for (i = 0; i < MAX_I2C_RETRY; ++i) { +- if (!i2c_write(I2C_ADDRESS, reg, 1, data, len)) { ++ if (!i2c_write(tps6586x_dev, reg, data, len)) { + retval = 0; + goto exit; + } +@@ -81,7 +70,6 @@ + } + + exit: +- i2c_set_bus_num(old_bus_num); + debug("pmu_write %x=%x: ", reg, retval); + for (i = 0; i < len; i++) + debug("%x ", data[i]); +@@ -163,7 +151,7 @@ + uchar val; + int ret; + +- assert(inited); ++ assert(tps6586x_dev); + ret = tps6586x_read(PFM_MODE); + if (ret != -1) { + val = (uchar)ret; +@@ -184,7 +172,7 @@ + int sm0, sm1; + int bad; + +- assert(inited); ++ assert(tps6586x_dev); + + /* get current voltage settings */ + if (read_voltages(&sm0, &sm1)) { +@@ -255,10 +243,9 @@ + return bad ? -1 : 0; + } + +-int tps6586x_init(int bus) ++int tps6586x_init(struct udevice *dev) + { +- bus_num = bus; +- inited = 1; ++ tps6586x_dev = dev; + + return 0; + } +diff -ruN u-boot-2015.01-rc3/drivers/qe/qe.c u-boot/drivers/qe/qe.c +--- u-boot-2015.01-rc3/drivers/qe/qe.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/qe/qe.c 2015-01-01 17:34:32.693496038 +0100 +@@ -13,6 +13,9 @@ + #include "asm/io.h" + #include "linux/immap_qe.h" + #include "qe.h" ++#ifdef CONFIG_LS102XA ++#include ++#endif + + #define MPC85xx_DEVDISR_QE_DISABLE 0x1 + +@@ -335,8 +338,12 @@ + size_t length; + const struct qe_header *hdr; + #ifdef CONFIG_DEEP_SLEEP ++#ifdef CONFIG_LS102XA ++ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; ++#else + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + #endif ++#endif + if (!firmware) { + printf("Invalid address\n"); + return -EINVAL; +@@ -470,8 +477,12 @@ + size_t length; + const struct qe_header *hdr; + #ifdef CONFIG_DEEP_SLEEP ++#ifdef CONFIG_LS102XA ++ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; ++#else + ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + #endif ++#endif + if (!firmware) { + printf("Invalid address\n"); + return -EINVAL; +diff -ruN u-boot-2015.01-rc3/drivers/serial/Makefile u-boot/drivers/serial/Makefile +--- u-boot-2015.01-rc3/drivers/serial/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/serial/Makefile 2015-01-01 17:34:32.697495972 +0100 +@@ -43,7 +43,7 @@ + obj-$(CONFIG_TEGRA_SERIAL) += serial_tegra.o + obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o + obj-$(CONFIG_OMAP_SERIAL) += serial_omap.o +-obj-$(CONFIG_COREBOOT_SERIAL) += serial_coreboot.o ++obj-$(CONFIG_X86_SERIAL) += serial_x86.o + + ifndef CONFIG_SPL_BUILD + obj-$(CONFIG_USB_TTY) += usbtty.o +diff -ruN u-boot-2015.01-rc3/drivers/serial/serial_coreboot.c u-boot/drivers/serial/serial_coreboot.c +--- u-boot-2015.01-rc3/drivers/serial/serial_coreboot.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/serial/serial_coreboot.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,38 +0,0 @@ +-/* +- * Copyright (c) 2014 Google, Inc +- * +- * SPDX-License-Identifier: GPL-2.0+ +- */ +- +-#include +-#include +-#include +-#include +- +-static const struct udevice_id coreboot_serial_ids[] = { +- { .compatible = "coreboot-uart" }, +- { } +-}; +- +-static int coreboot_serial_ofdata_to_platdata(struct udevice *dev) +-{ +- struct ns16550_platdata *plat = dev_get_platdata(dev); +- int ret; +- +- ret = ns16550_serial_ofdata_to_platdata(dev); +- if (ret) +- return ret; +- plat->clock = 1843200; +- +- return 0; +-} +-U_BOOT_DRIVER(serial_ns16550) = { +- .name = "serial_coreboot", +- .id = UCLASS_SERIAL, +- .of_match = coreboot_serial_ids, +- .ofdata_to_platdata = coreboot_serial_ofdata_to_platdata, +- .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), +- .priv_auto_alloc_size = sizeof(struct NS16550), +- .probe = ns16550_serial_probe, +- .ops = &ns16550_serial_ops, +-}; +diff -ruN u-boot-2015.01-rc3/drivers/serial/serial_pl01x.c u-boot/drivers/serial/serial_pl01x.c +--- u-boot-2015.01-rc3/drivers/serial/serial_pl01x.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/serial/serial_pl01x.c 2015-01-01 17:34:32.697495972 +0100 +@@ -348,6 +348,7 @@ + .probe = pl01x_serial_probe, + .ops = &pl01x_serial_ops, + .flags = DM_FLAG_PRE_RELOC, ++ .priv_auto_alloc_size = sizeof(struct pl01x_priv), + }; + + #endif +diff -ruN u-boot-2015.01-rc3/drivers/serial/serial_x86.c u-boot/drivers/serial/serial_x86.c +--- u-boot-2015.01-rc3/drivers/serial/serial_x86.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/drivers/serial/serial_x86.c 2015-01-01 17:34:32.697495972 +0100 +@@ -0,0 +1,38 @@ ++/* ++ * Copyright (c) 2014 Google, Inc ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++ ++static const struct udevice_id x86_serial_ids[] = { ++ { .compatible = "x86-uart" }, ++ { } ++}; ++ ++static int x86_serial_ofdata_to_platdata(struct udevice *dev) ++{ ++ struct ns16550_platdata *plat = dev_get_platdata(dev); ++ int ret; ++ ++ ret = ns16550_serial_ofdata_to_platdata(dev); ++ if (ret) ++ return ret; ++ plat->clock = 1843200; ++ ++ return 0; ++} ++U_BOOT_DRIVER(serial_ns16550) = { ++ .name = "serial_x86", ++ .id = UCLASS_SERIAL, ++ .of_match = x86_serial_ids, ++ .ofdata_to_platdata = x86_serial_ofdata_to_platdata, ++ .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), ++ .priv_auto_alloc_size = sizeof(struct NS16550), ++ .probe = ns16550_serial_probe, ++ .ops = &ns16550_serial_ops, ++}; +diff -ruN u-boot-2015.01-rc3/drivers/spi/cadence_qspi_apb.c u-boot/drivers/spi/cadence_qspi_apb.c +--- u-boot-2015.01-rc3/drivers/spi/cadence_qspi_apb.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/drivers/spi/cadence_qspi_apb.c 2015-01-01 17:34:32.701495908 +0100 +@@ -0,0 +1,898 @@ ++/* ++ * Copyright (C) 2012 Altera Corporation ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * - Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * - Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * - Neither the name of the Altera Corporation nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++#include "cadence_qspi.h" ++ ++#define CQSPI_REG_POLL_US (1) /* 1us */ ++#define CQSPI_REG_RETRY (10000) ++#define CQSPI_POLL_IDLE_RETRY (3) ++ ++#define CQSPI_FIFO_WIDTH (4) ++ ++/* Controller sram size in word */ ++#define CQSPI_REG_SRAM_SIZE_WORD (128) ++#define CQSPI_REG_SRAM_RESV_WORDS (2) ++#define CQSPI_REG_SRAM_PARTITION_WR (1) ++#define CQSPI_REG_SRAM_PARTITION_RD \ ++ (CQSPI_REG_SRAM_SIZE_WORD - CQSPI_REG_SRAM_RESV_WORDS) ++#define CQSPI_REG_SRAM_THRESHOLD_WORDS (50) ++ ++/* Transfer mode */ ++#define CQSPI_INST_TYPE_SINGLE (0) ++#define CQSPI_INST_TYPE_DUAL (1) ++#define CQSPI_INST_TYPE_QUAD (2) ++ ++#define CQSPI_STIG_DATA_LEN_MAX (8) ++#define CQSPI_INDIRECTTRIGGER_ADDR_MASK (0xFFFFF) ++ ++#define CQSPI_DUMMY_CLKS_PER_BYTE (8) ++#define CQSPI_DUMMY_BYTES_MAX (4) ++ ++ ++#define CQSPI_REG_SRAM_FILL_THRESHOLD \ ++ ((CQSPI_REG_SRAM_SIZE_WORD / 2) * CQSPI_FIFO_WIDTH) ++/**************************************************************************** ++ * Controller's configuration and status register (offset from QSPI_BASE) ++ ****************************************************************************/ ++#define CQSPI_REG_CONFIG 0x00 ++#define CQSPI_REG_CONFIG_CLK_POL_LSB 1 ++#define CQSPI_REG_CONFIG_CLK_PHA_LSB 2 ++#define CQSPI_REG_CONFIG_ENABLE_MASK (1 << 0) ++#define CQSPI_REG_CONFIG_DIRECT_MASK (1 << 7) ++#define CQSPI_REG_CONFIG_DECODE_MASK (1 << 9) ++#define CQSPI_REG_CONFIG_XIP_IMM_MASK (1 << 18) ++#define CQSPI_REG_CONFIG_CHIPSELECT_LSB 10 ++#define CQSPI_REG_CONFIG_BAUD_LSB 19 ++#define CQSPI_REG_CONFIG_IDLE_LSB 31 ++#define CQSPI_REG_CONFIG_CHIPSELECT_MASK 0xF ++#define CQSPI_REG_CONFIG_BAUD_MASK 0xF ++ ++#define CQSPI_REG_RD_INSTR 0x04 ++#define CQSPI_REG_RD_INSTR_OPCODE_LSB 0 ++#define CQSPI_REG_RD_INSTR_TYPE_INSTR_LSB 8 ++#define CQSPI_REG_RD_INSTR_TYPE_ADDR_LSB 12 ++#define CQSPI_REG_RD_INSTR_TYPE_DATA_LSB 16 ++#define CQSPI_REG_RD_INSTR_MODE_EN_LSB 20 ++#define CQSPI_REG_RD_INSTR_DUMMY_LSB 24 ++#define CQSPI_REG_RD_INSTR_TYPE_INSTR_MASK 0x3 ++#define CQSPI_REG_RD_INSTR_TYPE_ADDR_MASK 0x3 ++#define CQSPI_REG_RD_INSTR_TYPE_DATA_MASK 0x3 ++#define CQSPI_REG_RD_INSTR_DUMMY_MASK 0x1F ++ ++#define CQSPI_REG_WR_INSTR 0x08 ++#define CQSPI_REG_WR_INSTR_OPCODE_LSB 0 ++ ++#define CQSPI_REG_DELAY 0x0C ++#define CQSPI_REG_DELAY_TSLCH_LSB 0 ++#define CQSPI_REG_DELAY_TCHSH_LSB 8 ++#define CQSPI_REG_DELAY_TSD2D_LSB 16 ++#define CQSPI_REG_DELAY_TSHSL_LSB 24 ++#define CQSPI_REG_DELAY_TSLCH_MASK 0xFF ++#define CQSPI_REG_DELAY_TCHSH_MASK 0xFF ++#define CQSPI_REG_DELAY_TSD2D_MASK 0xFF ++#define CQSPI_REG_DELAY_TSHSL_MASK 0xFF ++ ++#define CQSPI_READLCAPTURE 0x10 ++#define CQSPI_READLCAPTURE_BYPASS_LSB 0 ++#define CQSPI_READLCAPTURE_DELAY_LSB 1 ++#define CQSPI_READLCAPTURE_DELAY_MASK 0xF ++ ++#define CQSPI_REG_SIZE 0x14 ++#define CQSPI_REG_SIZE_ADDRESS_LSB 0 ++#define CQSPI_REG_SIZE_PAGE_LSB 4 ++#define CQSPI_REG_SIZE_BLOCK_LSB 16 ++#define CQSPI_REG_SIZE_ADDRESS_MASK 0xF ++#define CQSPI_REG_SIZE_PAGE_MASK 0xFFF ++#define CQSPI_REG_SIZE_BLOCK_MASK 0x3F ++ ++#define CQSPI_REG_SRAMPARTITION 0x18 ++#define CQSPI_REG_INDIRECTTRIGGER 0x1C ++ ++#define CQSPI_REG_REMAP 0x24 ++#define CQSPI_REG_MODE_BIT 0x28 ++ ++#define CQSPI_REG_SDRAMLEVEL 0x2C ++#define CQSPI_REG_SDRAMLEVEL_RD_LSB 0 ++#define CQSPI_REG_SDRAMLEVEL_WR_LSB 16 ++#define CQSPI_REG_SDRAMLEVEL_RD_MASK 0xFFFF ++#define CQSPI_REG_SDRAMLEVEL_WR_MASK 0xFFFF ++ ++#define CQSPI_REG_IRQSTATUS 0x40 ++#define CQSPI_REG_IRQMASK 0x44 ++ ++#define CQSPI_REG_INDIRECTRD 0x60 ++#define CQSPI_REG_INDIRECTRD_START_MASK (1 << 0) ++#define CQSPI_REG_INDIRECTRD_CANCEL_MASK (1 << 1) ++#define CQSPI_REG_INDIRECTRD_INPROGRESS_MASK (1 << 2) ++#define CQSPI_REG_INDIRECTRD_DONE_MASK (1 << 5) ++ ++#define CQSPI_REG_INDIRECTRDWATERMARK 0x64 ++#define CQSPI_REG_INDIRECTRDSTARTADDR 0x68 ++#define CQSPI_REG_INDIRECTRDBYTES 0x6C ++ ++#define CQSPI_REG_CMDCTRL 0x90 ++#define CQSPI_REG_CMDCTRL_EXECUTE_MASK (1 << 0) ++#define CQSPI_REG_CMDCTRL_INPROGRESS_MASK (1 << 1) ++#define CQSPI_REG_CMDCTRL_DUMMY_LSB 7 ++#define CQSPI_REG_CMDCTRL_WR_BYTES_LSB 12 ++#define CQSPI_REG_CMDCTRL_WR_EN_LSB 15 ++#define CQSPI_REG_CMDCTRL_ADD_BYTES_LSB 16 ++#define CQSPI_REG_CMDCTRL_ADDR_EN_LSB 19 ++#define CQSPI_REG_CMDCTRL_RD_BYTES_LSB 20 ++#define CQSPI_REG_CMDCTRL_RD_EN_LSB 23 ++#define CQSPI_REG_CMDCTRL_OPCODE_LSB 24 ++#define CQSPI_REG_CMDCTRL_DUMMY_MASK 0x1F ++#define CQSPI_REG_CMDCTRL_WR_BYTES_MASK 0x7 ++#define CQSPI_REG_CMDCTRL_ADD_BYTES_MASK 0x3 ++#define CQSPI_REG_CMDCTRL_RD_BYTES_MASK 0x7 ++#define CQSPI_REG_CMDCTRL_OPCODE_MASK 0xFF ++ ++#define CQSPI_REG_INDIRECTWR 0x70 ++#define CQSPI_REG_INDIRECTWR_START_MASK (1 << 0) ++#define CQSPI_REG_INDIRECTWR_CANCEL_MASK (1 << 1) ++#define CQSPI_REG_INDIRECTWR_INPROGRESS_MASK (1 << 2) ++#define CQSPI_REG_INDIRECTWR_DONE_MASK (1 << 5) ++ ++#define CQSPI_REG_INDIRECTWRWATERMARK 0x74 ++#define CQSPI_REG_INDIRECTWRSTARTADDR 0x78 ++#define CQSPI_REG_INDIRECTWRBYTES 0x7C ++ ++#define CQSPI_REG_CMDADDRESS 0x94 ++#define CQSPI_REG_CMDREADDATALOWER 0xA0 ++#define CQSPI_REG_CMDREADDATAUPPER 0xA4 ++#define CQSPI_REG_CMDWRITEDATALOWER 0xA8 ++#define CQSPI_REG_CMDWRITEDATAUPPER 0xAC ++ ++#define CQSPI_REG_IS_IDLE(base) \ ++ ((readl(base + CQSPI_REG_CONFIG) >> \ ++ CQSPI_REG_CONFIG_IDLE_LSB) & 0x1) ++ ++#define CQSPI_CAL_DELAY(tdelay_ns, tref_ns, tsclk_ns) \ ++ ((((tdelay_ns) - (tsclk_ns)) / (tref_ns))) ++ ++#define CQSPI_GET_RD_SRAM_LEVEL(reg_base) \ ++ (((readl(reg_base + CQSPI_REG_SDRAMLEVEL)) >> \ ++ CQSPI_REG_SDRAMLEVEL_RD_LSB) & CQSPI_REG_SDRAMLEVEL_RD_MASK) ++ ++#define CQSPI_GET_WR_SRAM_LEVEL(reg_base) \ ++ (((readl(reg_base + CQSPI_REG_SDRAMLEVEL)) >> \ ++ CQSPI_REG_SDRAMLEVEL_WR_LSB) & CQSPI_REG_SDRAMLEVEL_WR_MASK) ++ ++static unsigned int cadence_qspi_apb_cmd2addr(const unsigned char *addr_buf, ++ unsigned int addr_width) ++{ ++ unsigned int addr; ++ ++ addr = (addr_buf[0] << 16) | (addr_buf[1] << 8) | addr_buf[2]; ++ ++ if (addr_width == 4) ++ addr = (addr << 8) | addr_buf[3]; ++ ++ return addr; ++} ++ ++static void cadence_qspi_apb_read_fifo_data(void *dest, ++ const void *src_ahb_addr, unsigned int bytes) ++{ ++ unsigned int temp; ++ int remaining = bytes; ++ unsigned int *dest_ptr = (unsigned int *)dest; ++ unsigned int *src_ptr = (unsigned int *)src_ahb_addr; ++ ++ while (remaining > 0) { ++ if (remaining >= CQSPI_FIFO_WIDTH) { ++ *dest_ptr = readl(src_ptr); ++ remaining -= CQSPI_FIFO_WIDTH; ++ } else { ++ /* dangling bytes */ ++ temp = readl(src_ptr); ++ memcpy(dest_ptr, &temp, remaining); ++ break; ++ } ++ dest_ptr++; ++ } ++ ++ return; ++} ++ ++static void cadence_qspi_apb_write_fifo_data(const void *dest_ahb_addr, ++ const void *src, unsigned int bytes) ++{ ++ unsigned int temp; ++ int remaining = bytes; ++ unsigned int *dest_ptr = (unsigned int *)dest_ahb_addr; ++ unsigned int *src_ptr = (unsigned int *)src; ++ ++ while (remaining > 0) { ++ if (remaining >= CQSPI_FIFO_WIDTH) { ++ writel(*src_ptr, dest_ptr); ++ remaining -= sizeof(unsigned int); ++ } else { ++ /* dangling bytes */ ++ memcpy(&temp, src_ptr, remaining); ++ writel(temp, dest_ptr); ++ break; ++ } ++ src_ptr++; ++ } ++ ++ return; ++} ++ ++/* Read from SRAM FIFO with polling SRAM fill level. */ ++static int qspi_read_sram_fifo_poll(const void *reg_base, void *dest_addr, ++ const void *src_addr, unsigned int num_bytes) ++{ ++ unsigned int remaining = num_bytes; ++ unsigned int retry; ++ unsigned int sram_level = 0; ++ unsigned char *dest = (unsigned char *)dest_addr; ++ ++ while (remaining > 0) { ++ retry = CQSPI_REG_RETRY; ++ while (retry--) { ++ sram_level = CQSPI_GET_RD_SRAM_LEVEL(reg_base); ++ if (sram_level) ++ break; ++ udelay(1); ++ } ++ ++ if (!retry) { ++ printf("QSPI: No receive data after polling for %d times\n", ++ CQSPI_REG_RETRY); ++ return -1; ++ } ++ ++ sram_level *= CQSPI_FIFO_WIDTH; ++ sram_level = sram_level > remaining ? remaining : sram_level; ++ ++ /* Read data from FIFO. */ ++ cadence_qspi_apb_read_fifo_data(dest, src_addr, sram_level); ++ dest += sram_level; ++ remaining -= sram_level; ++ udelay(1); ++ } ++ return 0; ++} ++ ++/* Write to SRAM FIFO with polling SRAM fill level. */ ++static int qpsi_write_sram_fifo_push(struct cadence_spi_platdata *plat, ++ const void *src_addr, unsigned int num_bytes) ++{ ++ const void *reg_base = plat->regbase; ++ void *dest_addr = plat->ahbbase; ++ unsigned int retry = CQSPI_REG_RETRY; ++ unsigned int sram_level; ++ unsigned int wr_bytes; ++ unsigned char *src = (unsigned char *)src_addr; ++ int remaining = num_bytes; ++ unsigned int page_size = plat->page_size; ++ unsigned int sram_threshold_words = CQSPI_REG_SRAM_THRESHOLD_WORDS; ++ ++ while (remaining > 0) { ++ retry = CQSPI_REG_RETRY; ++ while (retry--) { ++ sram_level = CQSPI_GET_WR_SRAM_LEVEL(reg_base); ++ if (sram_level <= sram_threshold_words) ++ break; ++ } ++ if (!retry) { ++ printf("QSPI: SRAM fill level (0x%08x) not hit lower expected level (0x%08x)", ++ sram_level, sram_threshold_words); ++ return -1; ++ } ++ /* Write a page or remaining bytes. */ ++ wr_bytes = (remaining > page_size) ? ++ page_size : remaining; ++ ++ cadence_qspi_apb_write_fifo_data(dest_addr, src, wr_bytes); ++ src += wr_bytes; ++ remaining -= wr_bytes; ++ } ++ ++ return 0; ++} ++ ++void cadence_qspi_apb_controller_enable(void *reg_base) ++{ ++ unsigned int reg; ++ reg = readl(reg_base + CQSPI_REG_CONFIG); ++ reg |= CQSPI_REG_CONFIG_ENABLE_MASK; ++ writel(reg, reg_base + CQSPI_REG_CONFIG); ++ return; ++} ++ ++void cadence_qspi_apb_controller_disable(void *reg_base) ++{ ++ unsigned int reg; ++ reg = readl(reg_base + CQSPI_REG_CONFIG); ++ reg &= ~CQSPI_REG_CONFIG_ENABLE_MASK; ++ writel(reg, reg_base + CQSPI_REG_CONFIG); ++ return; ++} ++ ++/* Return 1 if idle, otherwise return 0 (busy). */ ++static unsigned int cadence_qspi_wait_idle(void *reg_base) ++{ ++ unsigned int start, count = 0; ++ /* timeout in unit of ms */ ++ unsigned int timeout = 5000; ++ ++ start = get_timer(0); ++ for ( ; get_timer(start) < timeout ; ) { ++ if (CQSPI_REG_IS_IDLE(reg_base)) ++ count++; ++ else ++ count = 0; ++ /* ++ * Ensure the QSPI controller is in true idle state after ++ * reading back the same idle status consecutively ++ */ ++ if (count >= CQSPI_POLL_IDLE_RETRY) ++ return 1; ++ } ++ ++ /* Timeout, still in busy mode. */ ++ printf("QSPI: QSPI is still busy after poll for %d times.\n", ++ CQSPI_REG_RETRY); ++ return 0; ++} ++ ++void cadence_qspi_apb_readdata_capture(void *reg_base, ++ unsigned int bypass, unsigned int delay) ++{ ++ unsigned int reg; ++ cadence_qspi_apb_controller_disable(reg_base); ++ ++ reg = readl(reg_base + CQSPI_READLCAPTURE); ++ ++ if (bypass) ++ reg |= (1 << CQSPI_READLCAPTURE_BYPASS_LSB); ++ else ++ reg &= ~(1 << CQSPI_READLCAPTURE_BYPASS_LSB); ++ ++ reg &= ~(CQSPI_READLCAPTURE_DELAY_MASK ++ << CQSPI_READLCAPTURE_DELAY_LSB); ++ ++ reg |= ((delay & CQSPI_READLCAPTURE_DELAY_MASK) ++ << CQSPI_READLCAPTURE_DELAY_LSB); ++ ++ writel(reg, reg_base + CQSPI_READLCAPTURE); ++ ++ cadence_qspi_apb_controller_enable(reg_base); ++ return; ++} ++ ++void cadence_qspi_apb_config_baudrate_div(void *reg_base, ++ unsigned int ref_clk_hz, unsigned int sclk_hz) ++{ ++ unsigned int reg; ++ unsigned int div; ++ ++ cadence_qspi_apb_controller_disable(reg_base); ++ reg = readl(reg_base + CQSPI_REG_CONFIG); ++ reg &= ~(CQSPI_REG_CONFIG_BAUD_MASK << CQSPI_REG_CONFIG_BAUD_LSB); ++ ++ div = ref_clk_hz / sclk_hz; ++ ++ if (div > 32) ++ div = 32; ++ ++ /* Check if even number. */ ++ if ((div & 1)) { ++ div = (div / 2); ++ } else { ++ if (ref_clk_hz % sclk_hz) ++ /* ensure generated SCLK doesn't exceed user ++ specified sclk_hz */ ++ div = (div / 2); ++ else ++ div = (div / 2) - 1; ++ } ++ ++ debug("%s: ref_clk %dHz sclk %dHz Div 0x%x\n", __func__, ++ ref_clk_hz, sclk_hz, div); ++ ++ div = (div & CQSPI_REG_CONFIG_BAUD_MASK) << CQSPI_REG_CONFIG_BAUD_LSB; ++ reg |= div; ++ writel(reg, reg_base + CQSPI_REG_CONFIG); ++ ++ cadence_qspi_apb_controller_enable(reg_base); ++ return; ++} ++ ++void cadence_qspi_apb_set_clk_mode(void *reg_base, ++ unsigned int clk_pol, unsigned int clk_pha) ++{ ++ unsigned int reg; ++ ++ cadence_qspi_apb_controller_disable(reg_base); ++ reg = readl(reg_base + CQSPI_REG_CONFIG); ++ reg &= ~(1 << ++ (CQSPI_REG_CONFIG_CLK_POL_LSB | CQSPI_REG_CONFIG_CLK_PHA_LSB)); ++ ++ reg |= ((clk_pol & 0x1) << CQSPI_REG_CONFIG_CLK_POL_LSB); ++ reg |= ((clk_pha & 0x1) << CQSPI_REG_CONFIG_CLK_PHA_LSB); ++ ++ writel(reg, reg_base + CQSPI_REG_CONFIG); ++ ++ cadence_qspi_apb_controller_enable(reg_base); ++ return; ++} ++ ++void cadence_qspi_apb_chipselect(void *reg_base, ++ unsigned int chip_select, unsigned int decoder_enable) ++{ ++ unsigned int reg; ++ ++ cadence_qspi_apb_controller_disable(reg_base); ++ ++ debug("%s : chipselect %d decode %d\n", __func__, chip_select, ++ decoder_enable); ++ ++ reg = readl(reg_base + CQSPI_REG_CONFIG); ++ /* docoder */ ++ if (decoder_enable) { ++ reg |= CQSPI_REG_CONFIG_DECODE_MASK; ++ } else { ++ reg &= ~CQSPI_REG_CONFIG_DECODE_MASK; ++ /* Convert CS if without decoder. ++ * CS0 to 4b'1110 ++ * CS1 to 4b'1101 ++ * CS2 to 4b'1011 ++ * CS3 to 4b'0111 ++ */ ++ chip_select = 0xF & ~(1 << chip_select); ++ } ++ ++ reg &= ~(CQSPI_REG_CONFIG_CHIPSELECT_MASK ++ << CQSPI_REG_CONFIG_CHIPSELECT_LSB); ++ reg |= (chip_select & CQSPI_REG_CONFIG_CHIPSELECT_MASK) ++ << CQSPI_REG_CONFIG_CHIPSELECT_LSB; ++ writel(reg, reg_base + CQSPI_REG_CONFIG); ++ ++ cadence_qspi_apb_controller_enable(reg_base); ++ return; ++} ++ ++void cadence_qspi_apb_delay(void *reg_base, ++ unsigned int ref_clk, unsigned int sclk_hz, ++ unsigned int tshsl_ns, unsigned int tsd2d_ns, ++ unsigned int tchsh_ns, unsigned int tslch_ns) ++{ ++ unsigned int ref_clk_ns; ++ unsigned int sclk_ns; ++ unsigned int tshsl, tchsh, tslch, tsd2d; ++ unsigned int reg; ++ ++ cadence_qspi_apb_controller_disable(reg_base); ++ ++ /* Convert to ns. */ ++ ref_clk_ns = (1000000000) / ref_clk; ++ ++ /* Convert to ns. */ ++ sclk_ns = (1000000000) / sclk_hz; ++ ++ /* Plus 1 to round up 1 clock cycle. */ ++ tshsl = CQSPI_CAL_DELAY(tshsl_ns, ref_clk_ns, sclk_ns) + 1; ++ tchsh = CQSPI_CAL_DELAY(tchsh_ns, ref_clk_ns, sclk_ns) + 1; ++ tslch = CQSPI_CAL_DELAY(tslch_ns, ref_clk_ns, sclk_ns) + 1; ++ tsd2d = CQSPI_CAL_DELAY(tsd2d_ns, ref_clk_ns, sclk_ns) + 1; ++ ++ reg = ((tshsl & CQSPI_REG_DELAY_TSHSL_MASK) ++ << CQSPI_REG_DELAY_TSHSL_LSB); ++ reg |= ((tchsh & CQSPI_REG_DELAY_TCHSH_MASK) ++ << CQSPI_REG_DELAY_TCHSH_LSB); ++ reg |= ((tslch & CQSPI_REG_DELAY_TSLCH_MASK) ++ << CQSPI_REG_DELAY_TSLCH_LSB); ++ reg |= ((tsd2d & CQSPI_REG_DELAY_TSD2D_MASK) ++ << CQSPI_REG_DELAY_TSD2D_LSB); ++ writel(reg, reg_base + CQSPI_REG_DELAY); ++ ++ cadence_qspi_apb_controller_enable(reg_base); ++ return; ++} ++ ++void cadence_qspi_apb_controller_init(struct cadence_spi_platdata *plat) ++{ ++ unsigned reg; ++ ++ cadence_qspi_apb_controller_disable(plat->regbase); ++ ++ /* Configure the device size and address bytes */ ++ reg = readl(plat->regbase + CQSPI_REG_SIZE); ++ /* Clear the previous value */ ++ reg &= ~(CQSPI_REG_SIZE_PAGE_MASK << CQSPI_REG_SIZE_PAGE_LSB); ++ reg &= ~(CQSPI_REG_SIZE_BLOCK_MASK << CQSPI_REG_SIZE_BLOCK_LSB); ++ reg |= (plat->page_size << CQSPI_REG_SIZE_PAGE_LSB); ++ reg |= (plat->block_size << CQSPI_REG_SIZE_BLOCK_LSB); ++ writel(reg, plat->regbase + CQSPI_REG_SIZE); ++ ++ /* Configure the remap address register, no remap */ ++ writel(0, plat->regbase + CQSPI_REG_REMAP); ++ ++ /* Disable all interrupts */ ++ writel(0, plat->regbase + CQSPI_REG_IRQMASK); ++ ++ cadence_qspi_apb_controller_enable(plat->regbase); ++ return; ++} ++ ++static int cadence_qspi_apb_exec_flash_cmd(void *reg_base, ++ unsigned int reg) ++{ ++ unsigned int retry = CQSPI_REG_RETRY; ++ ++ /* Write the CMDCTRL without start execution. */ ++ writel(reg, reg_base + CQSPI_REG_CMDCTRL); ++ /* Start execute */ ++ reg |= CQSPI_REG_CMDCTRL_EXECUTE_MASK; ++ writel(reg, reg_base + CQSPI_REG_CMDCTRL); ++ ++ while (retry--) { ++ reg = readl(reg_base + CQSPI_REG_CMDCTRL); ++ if ((reg & CQSPI_REG_CMDCTRL_INPROGRESS_MASK) == 0) ++ break; ++ udelay(1); ++ } ++ ++ if (!retry) { ++ printf("QSPI: flash command execution timeout\n"); ++ return -EIO; ++ } ++ ++ /* Polling QSPI idle status. */ ++ if (!cadence_qspi_wait_idle(reg_base)) ++ return -EIO; ++ ++ return 0; ++} ++ ++/* For command RDID, RDSR. */ ++int cadence_qspi_apb_command_read(void *reg_base, ++ unsigned int cmdlen, const u8 *cmdbuf, unsigned int rxlen, ++ u8 *rxbuf) ++{ ++ unsigned int reg; ++ unsigned int read_len; ++ int status; ++ ++ if (!cmdlen || rxlen > CQSPI_STIG_DATA_LEN_MAX || rxbuf == NULL) { ++ printf("QSPI: Invalid input arguments cmdlen %d rxlen %d\n", ++ cmdlen, rxlen); ++ return -EINVAL; ++ } ++ ++ reg = cmdbuf[0] << CQSPI_REG_CMDCTRL_OPCODE_LSB; ++ ++ reg |= (0x1 << CQSPI_REG_CMDCTRL_RD_EN_LSB); ++ ++ /* 0 means 1 byte. */ ++ reg |= (((rxlen - 1) & CQSPI_REG_CMDCTRL_RD_BYTES_MASK) ++ << CQSPI_REG_CMDCTRL_RD_BYTES_LSB); ++ status = cadence_qspi_apb_exec_flash_cmd(reg_base, reg); ++ if (status != 0) ++ return status; ++ ++ reg = readl(reg_base + CQSPI_REG_CMDREADDATALOWER); ++ ++ /* Put the read value into rx_buf */ ++ read_len = (rxlen > 4) ? 4 : rxlen; ++ memcpy(rxbuf, ®, read_len); ++ rxbuf += read_len; ++ ++ if (rxlen > 4) { ++ reg = readl(reg_base + CQSPI_REG_CMDREADDATAUPPER); ++ ++ read_len = rxlen - read_len; ++ memcpy(rxbuf, ®, read_len); ++ } ++ return 0; ++} ++ ++/* For commands: WRSR, WREN, WRDI, CHIP_ERASE, BE, etc. */ ++int cadence_qspi_apb_command_write(void *reg_base, unsigned int cmdlen, ++ const u8 *cmdbuf, unsigned int txlen, const u8 *txbuf) ++{ ++ unsigned int reg = 0; ++ unsigned int addr_value; ++ unsigned int wr_data; ++ unsigned int wr_len; ++ ++ if (!cmdlen || cmdlen > 5 || txlen > 8 || cmdbuf == NULL) { ++ printf("QSPI: Invalid input arguments cmdlen %d txlen %d\n", ++ cmdlen, txlen); ++ return -EINVAL; ++ } ++ ++ reg |= cmdbuf[0] << CQSPI_REG_CMDCTRL_OPCODE_LSB; ++ ++ if (cmdlen == 4 || cmdlen == 5) { ++ /* Command with address */ ++ reg |= (0x1 << CQSPI_REG_CMDCTRL_ADDR_EN_LSB); ++ /* Number of bytes to write. */ ++ reg |= ((cmdlen - 2) & CQSPI_REG_CMDCTRL_ADD_BYTES_MASK) ++ << CQSPI_REG_CMDCTRL_ADD_BYTES_LSB; ++ /* Get address */ ++ addr_value = cadence_qspi_apb_cmd2addr(&cmdbuf[1], ++ cmdlen >= 5 ? 4 : 3); ++ ++ writel(addr_value, reg_base + CQSPI_REG_CMDADDRESS); ++ } ++ ++ if (txlen) { ++ /* writing data = yes */ ++ reg |= (0x1 << CQSPI_REG_CMDCTRL_WR_EN_LSB); ++ reg |= ((txlen - 1) & CQSPI_REG_CMDCTRL_WR_BYTES_MASK) ++ << CQSPI_REG_CMDCTRL_WR_BYTES_LSB; ++ ++ wr_len = txlen > 4 ? 4 : txlen; ++ memcpy(&wr_data, txbuf, wr_len); ++ writel(wr_data, reg_base + ++ CQSPI_REG_CMDWRITEDATALOWER); ++ ++ if (txlen > 4) { ++ txbuf += wr_len; ++ wr_len = txlen - wr_len; ++ memcpy(&wr_data, txbuf, wr_len); ++ writel(wr_data, reg_base + ++ CQSPI_REG_CMDWRITEDATAUPPER); ++ } ++ } ++ ++ /* Execute the command */ ++ return cadence_qspi_apb_exec_flash_cmd(reg_base, reg); ++} ++ ++/* Opcode + Address (3/4 bytes) + dummy bytes (0-4 bytes) */ ++int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat, ++ unsigned int cmdlen, const u8 *cmdbuf) ++{ ++ unsigned int reg; ++ unsigned int rd_reg; ++ unsigned int addr_value; ++ unsigned int dummy_clk; ++ unsigned int dummy_bytes; ++ unsigned int addr_bytes; ++ ++ /* ++ * Identify addr_byte. All NOR flash device drivers are using fast read ++ * which always expecting 1 dummy byte, 1 cmd byte and 3/4 addr byte. ++ * With that, the length is in value of 5 or 6. Only FRAM chip from ++ * ramtron using normal read (which won't need dummy byte). ++ * Unlikely NOR flash using normal read due to performance issue. ++ */ ++ if (cmdlen >= 5) ++ /* to cater fast read where cmd + addr + dummy */ ++ addr_bytes = cmdlen - 2; ++ else ++ /* for normal read (only ramtron as of now) */ ++ addr_bytes = cmdlen - 1; ++ ++ /* Setup the indirect trigger address */ ++ writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK), ++ plat->regbase + CQSPI_REG_INDIRECTTRIGGER); ++ ++ /* Configure SRAM partition for read. */ ++ writel(CQSPI_REG_SRAM_PARTITION_RD, plat->regbase + ++ CQSPI_REG_SRAMPARTITION); ++ ++ /* Configure the opcode */ ++ rd_reg = cmdbuf[0] << CQSPI_REG_RD_INSTR_OPCODE_LSB; ++ ++#if (CONFIG_SPI_FLASH_QUAD == 1) ++ /* Instruction and address at DQ0, data at DQ0-3. */ ++ rd_reg |= CQSPI_INST_TYPE_QUAD << CQSPI_REG_RD_INSTR_TYPE_DATA_LSB; ++#endif ++ ++ /* Get address */ ++ addr_value = cadence_qspi_apb_cmd2addr(&cmdbuf[1], addr_bytes); ++ writel(addr_value, plat->regbase + CQSPI_REG_INDIRECTRDSTARTADDR); ++ ++ /* The remaining lenght is dummy bytes. */ ++ dummy_bytes = cmdlen - addr_bytes - 1; ++ if (dummy_bytes) { ++ if (dummy_bytes > CQSPI_DUMMY_BYTES_MAX) ++ dummy_bytes = CQSPI_DUMMY_BYTES_MAX; ++ ++ rd_reg |= (1 << CQSPI_REG_RD_INSTR_MODE_EN_LSB); ++#if defined(CONFIG_SPL_SPI_XIP) && defined(CONFIG_SPL_BUILD) ++ writel(0x0, plat->regbase + CQSPI_REG_MODE_BIT); ++#else ++ writel(0xFF, plat->regbase + CQSPI_REG_MODE_BIT); ++#endif ++ ++ /* Convert to clock cycles. */ ++ dummy_clk = dummy_bytes * CQSPI_DUMMY_CLKS_PER_BYTE; ++ /* Need to minus the mode byte (8 clocks). */ ++ dummy_clk -= CQSPI_DUMMY_CLKS_PER_BYTE; ++ ++ if (dummy_clk) ++ rd_reg |= (dummy_clk & CQSPI_REG_RD_INSTR_DUMMY_MASK) ++ << CQSPI_REG_RD_INSTR_DUMMY_LSB; ++ } ++ ++ writel(rd_reg, plat->regbase + CQSPI_REG_RD_INSTR); ++ ++ /* set device size */ ++ reg = readl(plat->regbase + CQSPI_REG_SIZE); ++ reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; ++ reg |= (addr_bytes - 1); ++ writel(reg, plat->regbase + CQSPI_REG_SIZE); ++ return 0; ++} ++ ++int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat, ++ unsigned int rxlen, u8 *rxbuf) ++{ ++ unsigned int reg; ++ ++ writel(rxlen, plat->regbase + CQSPI_REG_INDIRECTRDBYTES); ++ ++ /* Start the indirect read transfer */ ++ writel(CQSPI_REG_INDIRECTRD_START_MASK, ++ plat->regbase + CQSPI_REG_INDIRECTRD); ++ ++ if (qspi_read_sram_fifo_poll(plat->regbase, (void *)rxbuf, ++ (const void *)plat->ahbbase, rxlen)) ++ goto failrd; ++ ++ /* Check flash indirect controller */ ++ reg = readl(plat->regbase + CQSPI_REG_INDIRECTRD); ++ if (!(reg & CQSPI_REG_INDIRECTRD_DONE_MASK)) { ++ reg = readl(plat->regbase + CQSPI_REG_INDIRECTRD); ++ printf("QSPI: indirect completion status error with reg 0x%08x\n", ++ reg); ++ goto failrd; ++ } ++ ++ /* Clear indirect completion status */ ++ writel(CQSPI_REG_INDIRECTRD_DONE_MASK, ++ plat->regbase + CQSPI_REG_INDIRECTRD); ++ return 0; ++ ++failrd: ++ /* Cancel the indirect read */ ++ writel(CQSPI_REG_INDIRECTRD_CANCEL_MASK, ++ plat->regbase + CQSPI_REG_INDIRECTRD); ++ return -1; ++} ++ ++/* Opcode + Address (3/4 bytes) */ ++int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat, ++ unsigned int cmdlen, const u8 *cmdbuf) ++{ ++ unsigned int reg; ++ unsigned int addr_bytes = cmdlen > 4 ? 4 : 3; ++ ++ if (cmdlen < 4 || cmdbuf == NULL) { ++ printf("QSPI: iInvalid input argument, len %d cmdbuf 0x%08x\n", ++ cmdlen, (unsigned int)cmdbuf); ++ return -EINVAL; ++ } ++ /* Setup the indirect trigger address */ ++ writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK), ++ plat->regbase + CQSPI_REG_INDIRECTTRIGGER); ++ ++ writel(CQSPI_REG_SRAM_PARTITION_WR, ++ plat->regbase + CQSPI_REG_SRAMPARTITION); ++ ++ /* Configure the opcode */ ++ reg = cmdbuf[0] << CQSPI_REG_WR_INSTR_OPCODE_LSB; ++ writel(reg, plat->regbase + CQSPI_REG_WR_INSTR); ++ ++ /* Setup write address. */ ++ reg = cadence_qspi_apb_cmd2addr(&cmdbuf[1], addr_bytes); ++ writel(reg, plat->regbase + CQSPI_REG_INDIRECTWRSTARTADDR); ++ ++ reg = readl(plat->regbase + CQSPI_REG_SIZE); ++ reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; ++ reg |= (addr_bytes - 1); ++ writel(reg, plat->regbase + CQSPI_REG_SIZE); ++ return 0; ++} ++ ++int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat, ++ unsigned int txlen, const u8 *txbuf) ++{ ++ unsigned int reg = 0; ++ unsigned int retry; ++ ++ /* Configure the indirect read transfer bytes */ ++ writel(txlen, plat->regbase + CQSPI_REG_INDIRECTWRBYTES); ++ ++ /* Start the indirect write transfer */ ++ writel(CQSPI_REG_INDIRECTWR_START_MASK, ++ plat->regbase + CQSPI_REG_INDIRECTWR); ++ ++ if (qpsi_write_sram_fifo_push(plat, (const void *)txbuf, txlen)) ++ goto failwr; ++ ++ /* Wait until last write is completed (FIFO empty) */ ++ retry = CQSPI_REG_RETRY; ++ while (retry--) { ++ reg = CQSPI_GET_WR_SRAM_LEVEL(plat->regbase); ++ if (reg == 0) ++ break; ++ ++ udelay(1); ++ } ++ ++ if (reg != 0) { ++ printf("QSPI: timeout for indirect write\n"); ++ goto failwr; ++ } ++ ++ /* Check flash indirect controller status */ ++ retry = CQSPI_REG_RETRY; ++ while (retry--) { ++ reg = readl(plat->regbase + CQSPI_REG_INDIRECTWR); ++ if (reg & CQSPI_REG_INDIRECTWR_DONE_MASK) ++ break; ++ udelay(1); ++ } ++ ++ if (!(reg & CQSPI_REG_INDIRECTWR_DONE_MASK)) { ++ printf("QSPI: indirect completion status error with reg 0x%08x\n", ++ reg); ++ goto failwr; ++ } ++ ++ /* Clear indirect completion status */ ++ writel(CQSPI_REG_INDIRECTWR_DONE_MASK, ++ plat->regbase + CQSPI_REG_INDIRECTWR); ++ return 0; ++ ++failwr: ++ /* Cancel the indirect write */ ++ writel(CQSPI_REG_INDIRECTWR_CANCEL_MASK, ++ plat->regbase + CQSPI_REG_INDIRECTWR); ++ return -1; ++} ++ ++void cadence_qspi_apb_enter_xip(void *reg_base, char xip_dummy) ++{ ++ unsigned int reg; ++ ++ /* enter XiP mode immediately and enable direct mode */ ++ reg = readl(reg_base + CQSPI_REG_CONFIG); ++ reg |= CQSPI_REG_CONFIG_ENABLE_MASK; ++ reg |= CQSPI_REG_CONFIG_DIRECT_MASK; ++ reg |= CQSPI_REG_CONFIG_XIP_IMM_MASK; ++ writel(reg, reg_base + CQSPI_REG_CONFIG); ++ ++ /* keep the XiP mode */ ++ writel(xip_dummy, reg_base + CQSPI_REG_MODE_BIT); ++ ++ /* Enable mode bit at devrd */ ++ reg = readl(reg_base + CQSPI_REG_RD_INSTR); ++ reg |= (1 << CQSPI_REG_RD_INSTR_MODE_EN_LSB); ++ writel(reg, reg_base + CQSPI_REG_RD_INSTR); ++} +diff -ruN u-boot-2015.01-rc3/drivers/spi/cadence_qspi.c u-boot/drivers/spi/cadence_qspi.c +--- u-boot-2015.01-rc3/drivers/spi/cadence_qspi.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/drivers/spi/cadence_qspi.c 2015-01-01 17:34:32.701495908 +0100 +@@ -0,0 +1,345 @@ ++/* ++ * Copyright (C) 2012 ++ * Altera Corporation ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include "cadence_qspi.h" ++ ++#define CQSPI_STIG_READ 0 ++#define CQSPI_STIG_WRITE 1 ++#define CQSPI_INDIRECT_READ 2 ++#define CQSPI_INDIRECT_WRITE 3 ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++static int cadence_spi_write_speed(struct udevice *bus, uint hz) ++{ ++ struct cadence_spi_platdata *plat = bus->platdata; ++ struct cadence_spi_priv *priv = dev_get_priv(bus); ++ ++ cadence_qspi_apb_config_baudrate_div(priv->regbase, ++ CONFIG_CQSPI_REF_CLK, hz); ++ ++ /* Reconfigure delay timing if speed is changed. */ ++ cadence_qspi_apb_delay(priv->regbase, CONFIG_CQSPI_REF_CLK, hz, ++ plat->tshsl_ns, plat->tsd2d_ns, ++ plat->tchsh_ns, plat->tslch_ns); ++ ++ return 0; ++} ++ ++/* Calibration sequence to determine the read data capture delay register */ ++static int spi_calibration(struct udevice *bus) ++{ ++ struct cadence_spi_platdata *plat = bus->platdata; ++ struct cadence_spi_priv *priv = dev_get_priv(bus); ++ void *base = priv->regbase; ++ u8 opcode_rdid = 0x9F; ++ unsigned int idcode = 0, temp = 0; ++ int err = 0, i, range_lo = -1, range_hi = -1; ++ ++ /* start with slowest clock (1 MHz) */ ++ cadence_spi_write_speed(bus, 1000000); ++ ++ /* configure the read data capture delay register to 0 */ ++ cadence_qspi_apb_readdata_capture(base, 1, 0); ++ ++ /* Enable QSPI */ ++ cadence_qspi_apb_controller_enable(base); ++ ++ /* read the ID which will be our golden value */ ++ err = cadence_qspi_apb_command_read(base, 1, &opcode_rdid, ++ 3, (u8 *)&idcode); ++ if (err) { ++ puts("SF: Calibration failed (read)\n"); ++ return err; ++ } ++ ++ /* use back the intended clock and find low range */ ++ cadence_spi_write_speed(bus, plat->max_hz); ++ for (i = 0; i < CQSPI_READ_CAPTURE_MAX_DELAY; i++) { ++ /* Disable QSPI */ ++ cadence_qspi_apb_controller_disable(base); ++ ++ /* reconfigure the read data capture delay register */ ++ cadence_qspi_apb_readdata_capture(base, 1, i); ++ ++ /* Enable back QSPI */ ++ cadence_qspi_apb_controller_enable(base); ++ ++ /* issue a RDID to get the ID value */ ++ err = cadence_qspi_apb_command_read(base, 1, &opcode_rdid, ++ 3, (u8 *)&temp); ++ if (err) { ++ puts("SF: Calibration failed (read)\n"); ++ return err; ++ } ++ ++ /* search for range lo */ ++ if (range_lo == -1 && temp == idcode) { ++ range_lo = i; ++ continue; ++ } ++ ++ /* search for range hi */ ++ if (range_lo != -1 && temp != idcode) { ++ range_hi = i - 1; ++ break; ++ } ++ range_hi = i; ++ } ++ ++ if (range_lo == -1) { ++ puts("SF: Calibration failed (low range)\n"); ++ return err; ++ } ++ ++ /* Disable QSPI for subsequent initialization */ ++ cadence_qspi_apb_controller_disable(base); ++ ++ /* configure the final value for read data capture delay register */ ++ cadence_qspi_apb_readdata_capture(base, 1, (range_hi + range_lo) / 2); ++ debug("SF: Read data capture delay calibrated to %i (%i - %i)\n", ++ (range_hi + range_lo) / 2, range_lo, range_hi); ++ ++ /* just to ensure we do once only when speed or chip select change */ ++ priv->qspi_calibrated_hz = plat->max_hz; ++ priv->qspi_calibrated_cs = spi_chip_select(bus); ++ ++ return 0; ++} ++ ++static int cadence_spi_set_speed(struct udevice *bus, uint hz) ++{ ++ struct cadence_spi_platdata *plat = bus->platdata; ++ struct cadence_spi_priv *priv = dev_get_priv(bus); ++ int err; ++ ++ /* Disable QSPI */ ++ cadence_qspi_apb_controller_disable(priv->regbase); ++ ++ cadence_spi_write_speed(bus, hz); ++ ++ /* Calibration required for different SCLK speed or chip select */ ++ if (priv->qspi_calibrated_hz != plat->max_hz || ++ priv->qspi_calibrated_cs != spi_chip_select(bus)) { ++ err = spi_calibration(bus); ++ if (err) ++ return err; ++ } ++ ++ /* Enable QSPI */ ++ cadence_qspi_apb_controller_enable(priv->regbase); ++ ++ debug("%s: speed=%d\n", __func__, hz); ++ ++ return 0; ++} ++ ++static int cadence_spi_probe(struct udevice *bus) ++{ ++ struct cadence_spi_platdata *plat = bus->platdata; ++ struct cadence_spi_priv *priv = dev_get_priv(bus); ++ ++ priv->regbase = plat->regbase; ++ priv->ahbbase = plat->ahbbase; ++ ++ if (!priv->qspi_is_init) { ++ cadence_qspi_apb_controller_init(plat); ++ priv->qspi_is_init = 1; ++ } ++ ++ return 0; ++} ++ ++static int cadence_spi_set_mode(struct udevice *bus, uint mode) ++{ ++ struct cadence_spi_priv *priv = dev_get_priv(bus); ++ unsigned int clk_pol = (mode & SPI_CPOL) ? 1 : 0; ++ unsigned int clk_pha = (mode & SPI_CPHA) ? 1 : 0; ++ ++ /* Disable QSPI */ ++ cadence_qspi_apb_controller_disable(priv->regbase); ++ ++ /* Set SPI mode */ ++ cadence_qspi_apb_set_clk_mode(priv->regbase, clk_pol, clk_pha); ++ ++ /* Enable QSPI */ ++ cadence_qspi_apb_controller_enable(priv->regbase); ++ ++ return 0; ++} ++ ++static int cadence_spi_xfer(struct udevice *dev, unsigned int bitlen, ++ const void *dout, void *din, unsigned long flags) ++{ ++ struct udevice *bus = dev->parent; ++ struct cadence_spi_platdata *plat = bus->platdata; ++ struct cadence_spi_priv *priv = dev_get_priv(bus); ++ void *base = priv->regbase; ++ u8 *cmd_buf = priv->cmd_buf; ++ size_t data_bytes; ++ int err = 0; ++ u32 mode = CQSPI_STIG_WRITE; ++ ++ if (flags & SPI_XFER_BEGIN) { ++ /* copy command to local buffer */ ++ priv->cmd_len = bitlen / 8; ++ memcpy(cmd_buf, dout, priv->cmd_len); ++ } ++ ++ if (flags == (SPI_XFER_BEGIN | SPI_XFER_END)) { ++ /* if start and end bit are set, the data bytes is 0. */ ++ data_bytes = 0; ++ } else { ++ data_bytes = bitlen / 8; ++ } ++ debug("%s: len=%d [bytes]\n", __func__, data_bytes); ++ ++ /* Set Chip select */ ++ cadence_qspi_apb_chipselect(base, spi_chip_select(dev), ++ CONFIG_CQSPI_DECODER); ++ ++ if ((flags & SPI_XFER_END) || (flags == 0)) { ++ if (priv->cmd_len == 0) { ++ printf("QSPI: Error, command is empty.\n"); ++ return -1; ++ } ++ ++ if (din && data_bytes) { ++ /* read */ ++ /* Use STIG if no address. */ ++ if (!CQSPI_IS_ADDR(priv->cmd_len)) ++ mode = CQSPI_STIG_READ; ++ else ++ mode = CQSPI_INDIRECT_READ; ++ } else if (dout && !(flags & SPI_XFER_BEGIN)) { ++ /* write */ ++ if (!CQSPI_IS_ADDR(priv->cmd_len)) ++ mode = CQSPI_STIG_WRITE; ++ else ++ mode = CQSPI_INDIRECT_WRITE; ++ } ++ ++ switch (mode) { ++ case CQSPI_STIG_READ: ++ err = cadence_qspi_apb_command_read( ++ base, priv->cmd_len, cmd_buf, ++ data_bytes, din); ++ ++ break; ++ case CQSPI_STIG_WRITE: ++ err = cadence_qspi_apb_command_write(base, ++ priv->cmd_len, cmd_buf, ++ data_bytes, dout); ++ break; ++ case CQSPI_INDIRECT_READ: ++ err = cadence_qspi_apb_indirect_read_setup(plat, ++ priv->cmd_len, cmd_buf); ++ if (!err) { ++ err = cadence_qspi_apb_indirect_read_execute ++ (plat, data_bytes, din); ++ } ++ break; ++ case CQSPI_INDIRECT_WRITE: ++ err = cadence_qspi_apb_indirect_write_setup ++ (plat, priv->cmd_len, cmd_buf); ++ if (!err) { ++ err = cadence_qspi_apb_indirect_write_execute ++ (plat, data_bytes, dout); ++ } ++ break; ++ default: ++ err = -1; ++ break; ++ } ++ ++ if (flags & SPI_XFER_END) { ++ /* clear command buffer */ ++ memset(cmd_buf, 0, sizeof(priv->cmd_buf)); ++ priv->cmd_len = 0; ++ } ++ } ++ ++ return err; ++} ++ ++static int cadence_spi_ofdata_to_platdata(struct udevice *bus) ++{ ++ struct cadence_spi_platdata *plat = bus->platdata; ++ const void *blob = gd->fdt_blob; ++ int node = bus->of_offset; ++ int subnode; ++ u32 data[4]; ++ int ret; ++ ++ /* 2 base addresses are needed, lets get them from the DT */ ++ ret = fdtdec_get_int_array(blob, node, "reg", data, ARRAY_SIZE(data)); ++ if (ret) { ++ printf("Error: Can't get base addresses (ret=%d)!\n", ret); ++ return -ENODEV; ++ } ++ ++ plat->regbase = (void *)data[0]; ++ plat->ahbbase = (void *)data[2]; ++ ++ /* Use 500KHz as a suitable default */ ++ plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", ++ 500000); ++ ++ /* All other paramters are embedded in the child node */ ++ subnode = fdt_first_subnode(blob, node); ++ if (!subnode) { ++ printf("Error: subnode with SPI flash config missing!\n"); ++ return -ENODEV; ++ } ++ ++ /* Read other parameters from DT */ ++ plat->page_size = fdtdec_get_int(blob, subnode, "page-size", 256); ++ plat->block_size = fdtdec_get_int(blob, subnode, "block-size", 16); ++ plat->tshsl_ns = fdtdec_get_int(blob, subnode, "tshsl-ns", 200); ++ plat->tsd2d_ns = fdtdec_get_int(blob, subnode, "tsd2d-ns", 255); ++ plat->tchsh_ns = fdtdec_get_int(blob, subnode, "tchsh-ns", 20); ++ plat->tslch_ns = fdtdec_get_int(blob, subnode, "tslch-ns", 20); ++ ++ debug("%s: regbase=%p ahbbase=%p max-frequency=%d page-size=%d\n", ++ __func__, plat->regbase, plat->ahbbase, plat->max_hz, ++ plat->page_size); ++ ++ return 0; ++} ++ ++static const struct dm_spi_ops cadence_spi_ops = { ++ .xfer = cadence_spi_xfer, ++ .set_speed = cadence_spi_set_speed, ++ .set_mode = cadence_spi_set_mode, ++ /* ++ * cs_info is not needed, since we require all chip selects to be ++ * in the device tree explicitly ++ */ ++}; ++ ++static const struct udevice_id cadence_spi_ids[] = { ++ { .compatible = "cadence,qspi" }, ++ { } ++}; ++ ++U_BOOT_DRIVER(cadence_spi) = { ++ .name = "cadence_spi", ++ .id = UCLASS_SPI, ++ .of_match = cadence_spi_ids, ++ .ops = &cadence_spi_ops, ++ .ofdata_to_platdata = cadence_spi_ofdata_to_platdata, ++ .platdata_auto_alloc_size = sizeof(struct cadence_spi_platdata), ++ .priv_auto_alloc_size = sizeof(struct cadence_spi_priv), ++ .per_child_auto_alloc_size = sizeof(struct spi_slave), ++ .probe = cadence_spi_probe, ++}; +diff -ruN u-boot-2015.01-rc3/drivers/spi/cadence_qspi.h u-boot/drivers/spi/cadence_qspi.h +--- u-boot-2015.01-rc3/drivers/spi/cadence_qspi.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/drivers/spi/cadence_qspi.h 2015-01-01 17:34:32.701495908 +0100 +@@ -0,0 +1,76 @@ ++/* ++ * Copyright (C) 2012 ++ * Altera Corporation ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __CADENCE_QSPI_H__ ++#define __CADENCE_QSPI_H__ ++ ++#define CQSPI_IS_ADDR(cmd_len) (cmd_len > 1 ? 1 : 0) ++ ++#define CQSPI_NO_DECODER_MAX_CS 4 ++#define CQSPI_DECODER_MAX_CS 16 ++#define CQSPI_READ_CAPTURE_MAX_DELAY 16 ++ ++struct cadence_spi_platdata { ++ unsigned int max_hz; ++ void *regbase; ++ void *ahbbase; ++ ++ u32 page_size; ++ u32 block_size; ++ u32 tshsl_ns; ++ u32 tsd2d_ns; ++ u32 tchsh_ns; ++ u32 tslch_ns; ++}; ++ ++struct cadence_spi_priv { ++ void *regbase; ++ void *ahbbase; ++ size_t cmd_len; ++ u8 cmd_buf[32]; ++ size_t data_len; ++ ++ int qspi_is_init; ++ unsigned int qspi_calibrated_hz; ++ unsigned int qspi_calibrated_cs; ++}; ++ ++/* Functions call declaration */ ++void cadence_qspi_apb_controller_init(struct cadence_spi_platdata *plat); ++void cadence_qspi_apb_controller_enable(void *reg_base_addr); ++void cadence_qspi_apb_controller_disable(void *reg_base_addr); ++ ++int cadence_qspi_apb_command_read(void *reg_base_addr, ++ unsigned int cmdlen, const u8 *cmdbuf, unsigned int rxlen, u8 *rxbuf); ++int cadence_qspi_apb_command_write(void *reg_base_addr, ++ unsigned int cmdlen, const u8 *cmdbuf, ++ unsigned int txlen, const u8 *txbuf); ++ ++int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat, ++ unsigned int cmdlen, const u8 *cmdbuf); ++int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat, ++ unsigned int rxlen, u8 *rxbuf); ++int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat, ++ unsigned int cmdlen, const u8 *cmdbuf); ++int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat, ++ unsigned int txlen, const u8 *txbuf); ++ ++void cadence_qspi_apb_chipselect(void *reg_base, ++ unsigned int chip_select, unsigned int decoder_enable); ++void cadence_qspi_apb_set_clk_mode(void *reg_base_addr, ++ unsigned int clk_pol, unsigned int clk_pha); ++void cadence_qspi_apb_config_baudrate_div(void *reg_base, ++ unsigned int ref_clk_hz, unsigned int sclk_hz); ++void cadence_qspi_apb_delay(void *reg_base, ++ unsigned int ref_clk, unsigned int sclk_hz, ++ unsigned int tshsl_ns, unsigned int tsd2d_ns, ++ unsigned int tchsh_ns, unsigned int tslch_ns); ++void cadence_qspi_apb_enter_xip(void *reg_base, char xip_dummy); ++void cadence_qspi_apb_readdata_capture(void *reg_base, ++ unsigned int bypass, unsigned int delay); ++ ++#endif /* __CADENCE_QSPI_H__ */ +diff -ruN u-boot-2015.01-rc3/drivers/spi/designware_spi.c u-boot/drivers/spi/designware_spi.c +--- u-boot-2015.01-rc3/drivers/spi/designware_spi.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/drivers/spi/designware_spi.c 2015-01-01 17:34:32.701495908 +0100 +@@ -0,0 +1,426 @@ ++/* ++ * Designware master SPI core controller driver ++ * ++ * Copyright (C) 2014 Stefan Roese ++ * ++ * Very loosely based on the Linux driver: ++ * drivers/spi/spi-dw.c, which is: ++ * Copyright (c) 2009, Intel Corporation. ++ * ++ * SPDX-License-Identifier: GPL-2.0 ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++/* Register offsets */ ++#define DW_SPI_CTRL0 0x00 ++#define DW_SPI_CTRL1 0x04 ++#define DW_SPI_SSIENR 0x08 ++#define DW_SPI_MWCR 0x0c ++#define DW_SPI_SER 0x10 ++#define DW_SPI_BAUDR 0x14 ++#define DW_SPI_TXFLTR 0x18 ++#define DW_SPI_RXFLTR 0x1c ++#define DW_SPI_TXFLR 0x20 ++#define DW_SPI_RXFLR 0x24 ++#define DW_SPI_SR 0x28 ++#define DW_SPI_IMR 0x2c ++#define DW_SPI_ISR 0x30 ++#define DW_SPI_RISR 0x34 ++#define DW_SPI_TXOICR 0x38 ++#define DW_SPI_RXOICR 0x3c ++#define DW_SPI_RXUICR 0x40 ++#define DW_SPI_MSTICR 0x44 ++#define DW_SPI_ICR 0x48 ++#define DW_SPI_DMACR 0x4c ++#define DW_SPI_DMATDLR 0x50 ++#define DW_SPI_DMARDLR 0x54 ++#define DW_SPI_IDR 0x58 ++#define DW_SPI_VERSION 0x5c ++#define DW_SPI_DR 0x60 ++ ++/* Bit fields in CTRLR0 */ ++#define SPI_DFS_OFFSET 0 ++ ++#define SPI_FRF_OFFSET 4 ++#define SPI_FRF_SPI 0x0 ++#define SPI_FRF_SSP 0x1 ++#define SPI_FRF_MICROWIRE 0x2 ++#define SPI_FRF_RESV 0x3 ++ ++#define SPI_MODE_OFFSET 6 ++#define SPI_SCPH_OFFSET 6 ++#define SPI_SCOL_OFFSET 7 ++ ++#define SPI_TMOD_OFFSET 8 ++#define SPI_TMOD_MASK (0x3 << SPI_TMOD_OFFSET) ++#define SPI_TMOD_TR 0x0 /* xmit & recv */ ++#define SPI_TMOD_TO 0x1 /* xmit only */ ++#define SPI_TMOD_RO 0x2 /* recv only */ ++#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */ ++ ++#define SPI_SLVOE_OFFSET 10 ++#define SPI_SRL_OFFSET 11 ++#define SPI_CFS_OFFSET 12 ++ ++/* Bit fields in SR, 7 bits */ ++#define SR_MASK 0x7f /* cover 7 bits */ ++#define SR_BUSY (1 << 0) ++#define SR_TF_NOT_FULL (1 << 1) ++#define SR_TF_EMPT (1 << 2) ++#define SR_RF_NOT_EMPT (1 << 3) ++#define SR_RF_FULL (1 << 4) ++#define SR_TX_ERR (1 << 5) ++#define SR_DCOL (1 << 6) ++ ++#define RX_TIMEOUT 1000 /* timeout in ms */ ++ ++struct dw_spi_platdata { ++ s32 frequency; /* Default clock frequency, -1 for none */ ++ void __iomem *regs; ++}; ++ ++struct dw_spi_priv { ++ void __iomem *regs; ++ unsigned int freq; /* Default frequency */ ++ unsigned int mode; ++ ++ int bits_per_word; ++ u8 cs; /* chip select pin */ ++ u8 tmode; /* TR/TO/RO/EEPROM */ ++ u8 type; /* SPI/SSP/MicroWire */ ++ int len; ++ ++ u32 fifo_len; /* depth of the FIFO buffer */ ++ void *tx; ++ void *tx_end; ++ void *rx; ++ void *rx_end; ++}; ++ ++static inline u32 dw_readl(struct dw_spi_priv *priv, u32 offset) ++{ ++ return __raw_readl(priv->regs + offset); ++} ++ ++static inline void dw_writel(struct dw_spi_priv *priv, u32 offset, u32 val) ++{ ++ __raw_writel(val, priv->regs + offset); ++} ++ ++static inline u16 dw_readw(struct dw_spi_priv *priv, u32 offset) ++{ ++ return __raw_readw(priv->regs + offset); ++} ++ ++static inline void dw_writew(struct dw_spi_priv *priv, u32 offset, u16 val) ++{ ++ __raw_writew(val, priv->regs + offset); ++} ++ ++static int dw_spi_ofdata_to_platdata(struct udevice *bus) ++{ ++ struct dw_spi_platdata *plat = bus->platdata; ++ const void *blob = gd->fdt_blob; ++ int node = bus->of_offset; ++ ++ plat->regs = (struct dw_spi *)fdtdec_get_addr(blob, node, "reg"); ++ ++ /* Use 500KHz as a suitable default */ ++ plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency", ++ 500000); ++ debug("%s: regs=%p max-frequency=%d\n", __func__, plat->regs, ++ plat->frequency); ++ ++ return 0; ++} ++ ++static inline void spi_enable_chip(struct dw_spi_priv *priv, int enable) ++{ ++ dw_writel(priv, DW_SPI_SSIENR, (enable ? 1 : 0)); ++} ++ ++/* Restart the controller, disable all interrupts, clean rx fifo */ ++static void spi_hw_init(struct dw_spi_priv *priv) ++{ ++ spi_enable_chip(priv, 0); ++ dw_writel(priv, DW_SPI_IMR, 0xff); ++ spi_enable_chip(priv, 1); ++ ++ /* ++ * Try to detect the FIFO depth if not set by interface driver, ++ * the depth could be from 2 to 256 from HW spec ++ */ ++ if (!priv->fifo_len) { ++ u32 fifo; ++ ++ for (fifo = 2; fifo <= 257; fifo++) { ++ dw_writew(priv, DW_SPI_TXFLTR, fifo); ++ if (fifo != dw_readw(priv, DW_SPI_TXFLTR)) ++ break; ++ } ++ ++ priv->fifo_len = (fifo == 257) ? 0 : fifo; ++ dw_writew(priv, DW_SPI_TXFLTR, 0); ++ } ++ debug("%s: fifo_len=%d\n", __func__, priv->fifo_len); ++} ++ ++static int dw_spi_probe(struct udevice *bus) ++{ ++ struct dw_spi_platdata *plat = dev_get_platdata(bus); ++ struct dw_spi_priv *priv = dev_get_priv(bus); ++ ++ priv->regs = plat->regs; ++ priv->freq = plat->frequency; ++ ++ /* Currently only bits_per_word == 8 supported */ ++ priv->bits_per_word = 8; ++ ++ priv->tmode = 0; /* Tx & Rx */ ++ ++ /* Basic HW init */ ++ spi_hw_init(priv); ++ ++ return 0; ++} ++ ++/* Return the max entries we can fill into tx fifo */ ++static inline u32 tx_max(struct dw_spi_priv *priv) ++{ ++ u32 tx_left, tx_room, rxtx_gap; ++ ++ tx_left = (priv->tx_end - priv->tx) / (priv->bits_per_word >> 3); ++ tx_room = priv->fifo_len - dw_readw(priv, DW_SPI_TXFLR); ++ ++ /* ++ * Another concern is about the tx/rx mismatch, we ++ * thought about using (priv->fifo_len - rxflr - txflr) as ++ * one maximum value for tx, but it doesn't cover the ++ * data which is out of tx/rx fifo and inside the ++ * shift registers. So a control from sw point of ++ * view is taken. ++ */ ++ rxtx_gap = ((priv->rx_end - priv->rx) - (priv->tx_end - priv->tx)) / ++ (priv->bits_per_word >> 3); ++ ++ return min3(tx_left, tx_room, (u32)(priv->fifo_len - rxtx_gap)); ++} ++ ++/* Return the max entries we should read out of rx fifo */ ++static inline u32 rx_max(struct dw_spi_priv *priv) ++{ ++ u32 rx_left = (priv->rx_end - priv->rx) / (priv->bits_per_word >> 3); ++ ++ return min_t(u32, rx_left, dw_readw(priv, DW_SPI_RXFLR)); ++} ++ ++static void dw_writer(struct dw_spi_priv *priv) ++{ ++ u32 max = tx_max(priv); ++ u16 txw = 0; ++ ++ while (max--) { ++ /* Set the tx word if the transfer's original "tx" is not null */ ++ if (priv->tx_end - priv->len) { ++ if (priv->bits_per_word == 8) ++ txw = *(u8 *)(priv->tx); ++ else ++ txw = *(u16 *)(priv->tx); ++ } ++ dw_writew(priv, DW_SPI_DR, txw); ++ debug("%s: tx=0x%02x\n", __func__, txw); ++ priv->tx += priv->bits_per_word >> 3; ++ } ++} ++ ++static int dw_reader(struct dw_spi_priv *priv) ++{ ++ unsigned start = get_timer(0); ++ u32 max; ++ u16 rxw; ++ ++ /* Wait for rx data to be ready */ ++ while (rx_max(priv) == 0) { ++ if (get_timer(start) > RX_TIMEOUT) ++ return -ETIMEDOUT; ++ } ++ ++ max = rx_max(priv); ++ ++ while (max--) { ++ rxw = dw_readw(priv, DW_SPI_DR); ++ debug("%s: rx=0x%02x\n", __func__, rxw); ++ ++ /* ++ * Care about rx only if the transfer's original "rx" is ++ * not null ++ */ ++ if (priv->rx_end - priv->len) { ++ if (priv->bits_per_word == 8) ++ *(u8 *)(priv->rx) = rxw; ++ else ++ *(u16 *)(priv->rx) = rxw; ++ } ++ priv->rx += priv->bits_per_word >> 3; ++ } ++ ++ return 0; ++} ++ ++static int poll_transfer(struct dw_spi_priv *priv) ++{ ++ int ret; ++ ++ do { ++ dw_writer(priv); ++ ret = dw_reader(priv); ++ if (ret < 0) ++ return ret; ++ } while (priv->rx_end > priv->rx); ++ ++ return 0; ++} ++ ++static int dw_spi_xfer(struct udevice *dev, unsigned int bitlen, ++ const void *dout, void *din, unsigned long flags) ++{ ++ struct udevice *bus = dev->parent; ++ struct dw_spi_priv *priv = dev_get_priv(bus); ++ const u8 *tx = dout; ++ u8 *rx = din; ++ int ret = 0; ++ u32 cr0 = 0; ++ u32 cs; ++ ++ /* spi core configured to do 8 bit transfers */ ++ if (bitlen % 8) { ++ debug("Non byte aligned SPI transfer.\n"); ++ return -1; ++ } ++ ++ cr0 = (priv->bits_per_word - 1) | (priv->type << SPI_FRF_OFFSET) | ++ (priv->mode << SPI_MODE_OFFSET) | ++ (priv->tmode << SPI_TMOD_OFFSET); ++ ++ if (rx && tx) ++ priv->tmode = SPI_TMOD_TR; ++ else if (rx) ++ priv->tmode = SPI_TMOD_RO; ++ else ++ priv->tmode = SPI_TMOD_TO; ++ ++ cr0 &= ~SPI_TMOD_MASK; ++ cr0 |= (priv->tmode << SPI_TMOD_OFFSET); ++ ++ priv->len = bitlen >> 3; ++ debug("%s: rx=%p tx=%p len=%d [bytes]\n", __func__, rx, tx, priv->len); ++ ++ priv->tx = (void *)tx; ++ priv->tx_end = priv->tx + priv->len; ++ priv->rx = rx; ++ priv->rx_end = priv->rx + priv->len; ++ ++ /* Disable controller before writing control registers */ ++ spi_enable_chip(priv, 0); ++ ++ debug("%s: cr0=%08x\n", __func__, cr0); ++ /* Reprogram cr0 only if changed */ ++ if (dw_readw(priv, DW_SPI_CTRL0) != cr0) ++ dw_writew(priv, DW_SPI_CTRL0, cr0); ++ ++ /* ++ * Configure the desired SS (slave select 0...3) in the controller ++ * The DW SPI controller will activate and deactivate this CS ++ * automatically. So no cs_activate() etc is needed in this driver. ++ */ ++ cs = spi_chip_select(dev); ++ dw_writel(priv, DW_SPI_SER, 1 << cs); ++ ++ /* Enable controller after writing control registers */ ++ spi_enable_chip(priv, 1); ++ ++ /* Start transfer in a polling loop */ ++ ret = poll_transfer(priv); ++ ++ return ret; ++} ++ ++static int dw_spi_set_speed(struct udevice *bus, uint speed) ++{ ++ struct dw_spi_platdata *plat = bus->platdata; ++ struct dw_spi_priv *priv = dev_get_priv(bus); ++ u16 clk_div; ++ ++ if (speed > plat->frequency) ++ speed = plat->frequency; ++ ++ /* Disable controller before writing control registers */ ++ spi_enable_chip(priv, 0); ++ ++ /* clk_div doesn't support odd number */ ++ clk_div = cm_get_spi_controller_clk_hz() / speed; ++ clk_div = (clk_div + 1) & 0xfffe; ++ dw_writel(priv, DW_SPI_BAUDR, clk_div); ++ ++ /* Enable controller after writing control registers */ ++ spi_enable_chip(priv, 1); ++ ++ priv->freq = speed; ++ debug("%s: regs=%p speed=%d clk_div=%d\n", __func__, priv->regs, ++ priv->freq, clk_div); ++ ++ return 0; ++} ++ ++static int dw_spi_set_mode(struct udevice *bus, uint mode) ++{ ++ struct dw_spi_priv *priv = dev_get_priv(bus); ++ ++ /* ++ * Can't set mode yet. Since this depends on if rx, tx, or ++ * rx & tx is requested. So we have to defer this to the ++ * real transfer function. ++ */ ++ priv->mode = mode; ++ debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode); ++ ++ return 0; ++} ++ ++static const struct dm_spi_ops dw_spi_ops = { ++ .xfer = dw_spi_xfer, ++ .set_speed = dw_spi_set_speed, ++ .set_mode = dw_spi_set_mode, ++ /* ++ * cs_info is not needed, since we require all chip selects to be ++ * in the device tree explicitly ++ */ ++}; ++ ++static const struct udevice_id dw_spi_ids[] = { ++ { .compatible = "snps,dw-spi-mmio" }, ++ { } ++}; ++ ++U_BOOT_DRIVER(dw_spi) = { ++ .name = "dw_spi", ++ .id = UCLASS_SPI, ++ .of_match = dw_spi_ids, ++ .ops = &dw_spi_ops, ++ .ofdata_to_platdata = dw_spi_ofdata_to_platdata, ++ .platdata_auto_alloc_size = sizeof(struct dw_spi_platdata), ++ .priv_auto_alloc_size = sizeof(struct dw_spi_priv), ++ .per_child_auto_alloc_size = sizeof(struct spi_slave), ++ .probe = dw_spi_probe, ++}; +diff -ruN u-boot-2015.01-rc3/drivers/spi/ich.c u-boot/drivers/spi/ich.c +--- u-boot-2015.01-rc3/drivers/spi/ich.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/spi/ich.c 2015-01-01 17:34:32.701495908 +0100 +@@ -141,6 +141,15 @@ + ich->slave.max_write_size = ctlr.databytes; + ich->speed = max_hz; + ++ /* ++ * ICH 7 SPI controller only supports array read command ++ * and byte program command for SST flash ++ */ ++ if (ctlr.ich_version == 7) { ++ ich->slave.op_mode_rx = SPI_OPM_RX_AS; ++ ich->slave.op_mode_tx = SPI_OPM_TX_BP; ++ } ++ + return &ich->slave; + } + +@@ -158,7 +167,8 @@ + */ + static int get_ich_version(uint16_t device_id) + { +- if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC) ++ if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC || ++ device_id == PCI_DEVICE_ID_INTEL_ITC_LPC) + return 7; + + if ((device_id >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN && +@@ -483,8 +493,6 @@ + struct spi_trans *trans = &ich->trans; + unsigned type = flags & (SPI_XFER_BEGIN | SPI_XFER_END); + int using_cmd = 0; +- /* Align read transactions to 64-byte boundaries */ +- char buff[ctlr.databytes]; + + /* Ee don't support writing partial bytes. */ + if (bitlen % 8) { +@@ -632,14 +640,9 @@ + */ + while (trans->bytesout || trans->bytesin) { + uint32_t data_length; +- uint32_t aligned_offset; +- uint32_t diff; +- +- aligned_offset = trans->offset & ~(ctlr.databytes - 1); +- diff = trans->offset - aligned_offset; + + /* SPI addresses are 24 bit only */ +- ich_writel(aligned_offset & 0x00FFFFFF, ctlr.addr); ++ ich_writel(trans->offset & 0x00FFFFFF, ctlr.addr); + + if (trans->bytesout) + data_length = min(trans->bytesout, ctlr.databytes); +@@ -673,13 +676,7 @@ + } + + if (trans->bytesin) { +- if (diff) { +- data_length -= diff; +- read_reg(ctlr.data, buff, ctlr.databytes); +- memcpy(trans->in, buff + diff, data_length); +- } else { +- read_reg(ctlr.data, trans->in, data_length); +- } ++ read_reg(ctlr.data, trans->in, data_length); + spi_use_in(trans, data_length); + if (with_address) + trans->offset += data_length; +diff -ruN u-boot-2015.01-rc3/drivers/spi/Makefile u-boot/drivers/spi/Makefile +--- u-boot-2015.01-rc3/drivers/spi/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/spi/Makefile 2015-01-01 17:34:32.701495908 +0100 +@@ -23,9 +23,11 @@ + obj-$(CONFIG_ATMEL_SPI) += atmel_spi.o + obj-$(CONFIG_BFIN_SPI) += bfin_spi.o + obj-$(CONFIG_BFIN_SPI6XX) += bfin_spi6xx.o ++obj-$(CONFIG_CADENCE_QSPI) += cadence_qspi.o cadence_qspi_apb.o + obj-$(CONFIG_CF_SPI) += cf_spi.o + obj-$(CONFIG_CF_QSPI) += cf_qspi.o + obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o ++obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o + obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o + obj-$(CONFIG_FTSSP010_SPI) += ftssp010_spi.o + obj-$(CONFIG_ICH_SPI) += ich.o +diff -ruN u-boot-2015.01-rc3/drivers/thermal/imx_thermal.c u-boot/drivers/thermal/imx_thermal.c +--- u-boot-2015.01-rc3/drivers/thermal/imx_thermal.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/thermal/imx_thermal.c 2015-01-01 17:34:32.705495842 +0100 +@@ -156,8 +156,6 @@ + if (fuse == 0 || fuse == ~0) { + printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse); + return -EPERM; +- } else { +- printf("CPU: Thermal calibration data: 0x%x\n", fuse); + } + + *priv = fuse; +diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/atmel_usba_udc.c u-boot/drivers/usb/gadget/atmel_usba_udc.c +--- u-boot-2015.01-rc3/drivers/usb/gadget/atmel_usba_udc.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/usb/gadget/atmel_usba_udc.c 2015-01-01 17:34:32.709495776 +0100 +@@ -1062,7 +1062,6 @@ + if ((epstatus & epctrl) & USBA_RX_BK_RDY) { + DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name); + receive_data(ep); +- usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + } + } + +diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/ether.c u-boot/drivers/usb/gadget/ether.c +--- u-boot-2015.01-rc3/drivers/usb/gadget/ether.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/usb/gadget/ether.c 2015-01-01 17:34:32.709495776 +0100 +@@ -852,30 +852,6 @@ + DEFINE_CACHE_ALIGN_BUFFER(u8, status_req, STATUS_BYTECOUNT); + #endif + +- +-/** +- * strlcpy - Copy a %NUL terminated string into a sized buffer +- * @dest: Where to copy the string to +- * @src: Where to copy the string from +- * @size: size of destination buffer +- * +- * Compatible with *BSD: the result is always a valid +- * NUL-terminated string that fits in the buffer (unless, +- * of course, the buffer size is zero). It does not pad +- * out the result like strncpy() does. +- */ +-size_t strlcpy(char *dest, const char *src, size_t size) +-{ +- size_t ret = strlen(src); +- +- if (size) { +- size_t len = (ret >= size) ? size - 1 : ret; +- memcpy(dest, src, len); +- dest[len] = '\0'; +- } +- return ret; +-} +- + /*============================================================================*/ + + /* +diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/f_dfu.c u-boot/drivers/usb/gadget/f_dfu.c +--- u-boot-2015.01-rc3/drivers/usb/gadget/f_dfu.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/usb/gadget/f_dfu.c 2015-01-01 17:34:32.709495776 +0100 +@@ -366,7 +366,7 @@ + to_runtime_mode(f_dfu); + f_dfu->dfu_state = DFU_STATE_appIDLE; + +- dfu_trigger_detach(); ++ g_dnl_trigger_detach(); + break; + default: + f_dfu->dfu_state = DFU_STATE_dfuERROR; +diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/f_fastboot.c u-boot/drivers/usb/gadget/f_fastboot.c +--- u-boot-2015.01-rc3/drivers/usb/gadget/f_fastboot.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/usb/gadget/f_fastboot.c 2015-01-01 17:34:32.709495776 +0100 +@@ -480,6 +480,17 @@ + fastboot_tx_write_str("OKAY"); + } + ++static void do_exit_on_complete(struct usb_ep *ep, struct usb_request *req) ++{ ++ g_dnl_trigger_detach(); ++} ++ ++static void cb_continue(struct usb_ep *ep, struct usb_request *req) ++{ ++ fastboot_func->in_req->complete = do_exit_on_complete; ++ fastboot_tx_write_str("OKAY"); ++} ++ + #ifdef CONFIG_FASTBOOT_FLASH + static void cb_flash(struct usb_ep *ep, struct usb_request *req) + { +@@ -520,6 +531,9 @@ + }, { + .cmd = "boot", + .cb = cb_boot, ++ }, { ++ .cmd = "continue", ++ .cb = cb_continue, + }, + #ifdef CONFIG_FASTBOOT_FLASH + { +diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/f_thor.c u-boot/drivers/usb/gadget/f_thor.c +--- u-boot-2015.01-rc3/drivers/usb/gadget/f_thor.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/usb/gadget/f_thor.c 2015-01-01 17:34:32.709495776 +0100 +@@ -205,12 +205,24 @@ + + static int download_tail(long long int left, int cnt) + { +- struct dfu_entity *dfu_entity = dfu_get_entity(alt_setting_num); +- void *transfer_buffer = dfu_get_buf(dfu_entity); ++ struct dfu_entity *dfu_entity; ++ void *transfer_buffer; + int ret; + + debug("%s: left: %llu cnt: %d\n", __func__, left, cnt); + ++ dfu_entity = dfu_get_entity(alt_setting_num); ++ if (!dfu_entity) { ++ error("Alt setting: %d entity not found!\n", alt_setting_num); ++ return -ENOENT; ++ } ++ ++ transfer_buffer = dfu_get_buf(dfu_entity); ++ if (!transfer_buffer) { ++ error("Transfer buffer not allocated!"); ++ return -ENXIO; ++ } ++ + if (left) { + ret = dfu_write(dfu_entity, transfer_buffer, left, cnt++); + if (ret) { +diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/g_dnl.c u-boot/drivers/usb/gadget/g_dnl.c +--- u-boot-2015.01-rc3/drivers/usb/gadget/g_dnl.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/usb/gadget/g_dnl.c 2015-01-01 17:34:32.709495776 +0100 +@@ -163,6 +163,23 @@ + return -EOPNOTSUPP; + } + ++static bool g_dnl_detach_request; ++ ++bool g_dnl_detach(void) ++{ ++ return g_dnl_detach_request; ++} ++ ++void g_dnl_trigger_detach(void) ++{ ++ g_dnl_detach_request = true; ++} ++ ++void g_dnl_clear_detach(void) ++{ ++ g_dnl_detach_request = false; ++} ++ + static int g_dnl_get_bcd_device_number(struct usb_composite_dev *cdev) + { + struct usb_gadget *gadget = cdev->gadget; +diff -ruN u-boot-2015.01-rc3/drivers/usb/host/ehci-fsl.c u-boot/drivers/usb/host/ehci-fsl.c +--- u-boot-2015.01-rc3/drivers/usb/host/ehci-fsl.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/usb/host/ehci-fsl.c 2015-01-01 17:34:32.713495710 +0100 +@@ -15,9 +15,14 @@ + #include + #include + #include ++#include + + #include "ehci.h" + ++#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT ++#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 ++#endif ++ + static void set_txfifothresh(struct usb_ehci *, u32); + + /* Check USB PHY clock valid */ +@@ -158,3 +163,184 @@ + cmd |= TXFIFO_THRESH(txfifo_thresh); + ehci_writel(&ehci->txfilltuning, cmd); + } ++ ++#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) ++static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode, ++ const char *phy_type, int start_offset) ++{ ++ const char *compat_dr = "fsl-usb2-dr"; ++ const char *compat_mph = "fsl-usb2-mph"; ++ const char *prop_mode = "dr_mode"; ++ const char *prop_type = "phy_type"; ++ const char *node_type = NULL; ++ int node_offset; ++ int err; ++ ++ node_offset = fdt_node_offset_by_compatible(blob, ++ start_offset, compat_mph); ++ if (node_offset < 0) { ++ node_offset = fdt_node_offset_by_compatible(blob, ++ start_offset, ++ compat_dr); ++ if (node_offset < 0) { ++ printf("WARNING: could not find compatible node: %s", ++ fdt_strerror(node_offset)); ++ return -1; ++ } ++ node_type = compat_dr; ++ } else { ++ node_type = compat_mph; ++ } ++ ++ if (mode) { ++ err = fdt_setprop(blob, node_offset, prop_mode, mode, ++ strlen(mode) + 1); ++ if (err < 0) ++ printf("WARNING: could not set %s for %s: %s.\n", ++ prop_mode, node_type, fdt_strerror(err)); ++ } ++ ++ if (phy_type) { ++ err = fdt_setprop(blob, node_offset, prop_type, phy_type, ++ strlen(phy_type) + 1); ++ if (err < 0) ++ printf("WARNING: could not set %s for %s: %s.\n", ++ prop_type, node_type, fdt_strerror(err)); ++ } ++ ++ return node_offset; ++} ++ ++static const char *fdt_usb_get_node_type(void *blob, int start_offset, ++ int *node_offset) ++{ ++ const char *compat_dr = "fsl-usb2-dr"; ++ const char *compat_mph = "fsl-usb2-mph"; ++ const char *node_type = NULL; ++ ++ *node_offset = fdt_node_offset_by_compatible(blob, start_offset, ++ compat_mph); ++ if (*node_offset < 0) { ++ *node_offset = fdt_node_offset_by_compatible(blob, ++ start_offset, ++ compat_dr); ++ if (*node_offset < 0) { ++ printf("ERROR: could not find compatible node: %s\n", ++ fdt_strerror(*node_offset)); ++ } else { ++ node_type = compat_dr; ++ } ++ } else { ++ node_type = compat_mph; ++ } ++ ++ return node_type; ++} ++ ++static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum, ++ int start_offset) ++{ ++ int node_offset, err; ++ const char *node_type = NULL; ++ ++ node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset); ++ if (!node_type) ++ return -1; ++ ++ err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0); ++ if (err < 0) { ++ printf("ERROR: could not set %s for %s: %s.\n", ++ prop_erratum, node_type, fdt_strerror(err)); ++ } ++ ++ return node_offset; ++} ++ ++void fdt_fixup_dr_usb(void *blob, bd_t *bd) ++{ ++ static const char * const modes[] = { "host", "peripheral", "otg" }; ++ static const char * const phys[] = { "ulpi", "utmi" }; ++ int usb_erratum_a006261_off = -1; ++ int usb_erratum_a007075_off = -1; ++ int usb_erratum_a007792_off = -1; ++ int usb_mode_off = -1; ++ int usb_phy_off = -1; ++ char str[5]; ++ int i, j; ++ ++ for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) { ++ const char *dr_mode_type = NULL; ++ const char *dr_phy_type = NULL; ++ int mode_idx = -1, phy_idx = -1; ++ ++ snprintf(str, 5, "%s%d", "usb", i); ++ if (hwconfig(str)) { ++ for (j = 0; j < ARRAY_SIZE(modes); j++) { ++ if (hwconfig_subarg_cmp(str, "dr_mode", ++ modes[j])) { ++ mode_idx = j; ++ break; ++ } ++ } ++ ++ for (j = 0; j < ARRAY_SIZE(phys); j++) { ++ if (hwconfig_subarg_cmp(str, "phy_type", ++ phys[j])) { ++ phy_idx = j; ++ break; ++ } ++ } ++ ++ if (mode_idx < 0 && phy_idx < 0) { ++ printf("WARNING: invalid phy or mode\n"); ++ return; ++ } ++ ++ if (mode_idx > -1) ++ dr_mode_type = modes[mode_idx]; ++ ++ if (phy_idx > -1) ++ dr_phy_type = phys[phy_idx]; ++ } ++ ++ usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, ++ dr_mode_type, NULL, ++ usb_mode_off); ++ ++ if (usb_mode_off < 0) ++ return; ++ ++ usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, ++ NULL, dr_phy_type, ++ usb_phy_off); ++ ++ if (usb_phy_off < 0) ++ return; ++ ++ if (has_erratum_a006261()) { ++ usb_erratum_a006261_off = fdt_fixup_usb_erratum ++ (blob, ++ "fsl,usb-erratum-a006261", ++ usb_erratum_a006261_off); ++ if (usb_erratum_a006261_off < 0) ++ return; ++ } ++ if (has_erratum_a007075()) { ++ usb_erratum_a007075_off = fdt_fixup_usb_erratum ++ (blob, ++ "fsl,usb-erratum-a007075", ++ usb_erratum_a007075_off); ++ if (usb_erratum_a007075_off < 0) ++ return; ++ } ++ if (has_erratum_a007792()) { ++ usb_erratum_a007792_off = fdt_fixup_usb_erratum ++ (blob, ++ "fsl,usb-erratum-a007792", ++ usb_erratum_a007792_off); ++ if (usb_erratum_a007792_off < 0) ++ return; ++ } ++ } ++} ++#endif +diff -ruN u-boot-2015.01-rc3/drivers/usb/host/ehci-hcd.c u-boot/drivers/usb/host/ehci-hcd.c +--- u-boot-2015.01-rc3/drivers/usb/host/ehci-hcd.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/usb/host/ehci-hcd.c 2015-01-01 17:34:32.713495710 +0100 +@@ -971,7 +971,6 @@ + qh_list->qh_link = cpu_to_hc32((uint32_t)qh_list | QH_LINK_TYPE_QH); + qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) | + QH_ENDPT1_EPS(USB_SPEED_HIGH)); +- qh_list->qh_curtd = cpu_to_hc32(QT_NEXT_TERMINATE); + qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); + qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); + qh_list->qh_overlay.qt_token = +diff -ruN u-boot-2015.01-rc3/drivers/usb/host/ehci-mx6.c u-boot/drivers/usb/host/ehci-mx6.c +--- u-boot-2015.01-rc3/drivers/usb/host/ehci-mx6.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/drivers/usb/host/ehci-mx6.c 2015-01-01 17:34:32.713495710 +0100 +@@ -160,7 +160,7 @@ + val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3); + __raw_writel(val, phy_ctrl); + +- return val & USBPHY_CTRL_OTG_ID; ++ return 0; + } + + /* Base address for this IP block is 0x02184800 */ +@@ -193,6 +193,28 @@ + __raw_writel(val, ctrl); + } + ++int usb_phy_mode(int port) ++{ ++ void __iomem *phy_reg; ++ void __iomem *phy_ctrl; ++ u32 val; ++ ++ phy_reg = (void __iomem *)phy_bases[port]; ++ phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL); ++ ++ val = __raw_readl(phy_ctrl); ++ ++ if (val & USBPHY_CTRL_OTG_ID) ++ return USB_INIT_DEVICE; ++ else ++ return USB_INIT_HOST; ++} ++ ++int __weak board_usb_phy_mode(int port) ++{ ++ return usb_phy_mode(port); ++} ++ + int __weak board_ehci_hcd_init(int port) + { + return 0; +@@ -221,7 +243,8 @@ + usb_power_config(index); + usb_oc_config(index); + usb_internal_phy_clock_gate(index, 1); +- type = usb_phy_enable(index, ehci) ? USB_INIT_DEVICE : USB_INIT_HOST; ++ usb_phy_enable(index, ehci); ++ type = board_usb_phy_mode(index); + + *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); + *hcor = (struct ehci_hcor *)((uint32_t)*hccr + +diff -ruN u-boot-2015.01-rc3/.git/config u-boot/.git/config +--- u-boot-2015.01-rc3/.git/config 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/config 2015-01-01 17:34:31.953508170 +0100 +@@ -0,0 +1,11 @@ ++[core] ++ repositoryformatversion = 0 ++ filemode = true ++ bare = false ++ logallrefupdates = true ++[remote "origin"] ++ fetch = +refs/heads/*:refs/remotes/origin/* ++ url = git://git.denx.de/u-boot.git ++[branch "master"] ++ remote = origin ++ merge = refs/heads/master +diff -ruN u-boot-2015.01-rc3/.git/description u-boot/.git/description +--- u-boot-2015.01-rc3/.git/description 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/description 2015-01-01 17:34:05.785937163 +0100 +@@ -0,0 +1 @@ ++Unnamed repository; edit this file 'description' to name the repository. +diff -ruN u-boot-2015.01-rc3/.git/HEAD u-boot/.git/HEAD +--- u-boot-2015.01-rc3/.git/HEAD 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/HEAD 2015-01-01 17:34:31.953508170 +0100 +@@ -0,0 +1 @@ ++ref: refs/heads/master +diff -ruN u-boot-2015.01-rc3/.git/hooks/applypatch-msg.sample u-boot/.git/hooks/applypatch-msg.sample +--- u-boot-2015.01-rc3/.git/hooks/applypatch-msg.sample 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/hooks/applypatch-msg.sample 2015-01-01 17:34:05.793937033 +0100 +@@ -0,0 +1,15 @@ ++#!/bin/sh ++# ++# An example hook script to check the commit log message taken by ++# applypatch from an e-mail message. ++# ++# The hook should exit with non-zero status after issuing an ++# appropriate message if it wants to stop the commit. The hook is ++# allowed to edit the commit message file. ++# ++# To enable this hook, rename this file to "applypatch-msg". ++ ++. git-sh-setup ++test -x "$GIT_DIR/hooks/commit-msg" && ++ exec "$GIT_DIR/hooks/commit-msg" ${1+"$@"} ++: +diff -ruN u-boot-2015.01-rc3/.git/hooks/commit-msg.sample u-boot/.git/hooks/commit-msg.sample +--- u-boot-2015.01-rc3/.git/hooks/commit-msg.sample 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/hooks/commit-msg.sample 2015-01-01 17:34:05.793937033 +0100 +@@ -0,0 +1,24 @@ ++#!/bin/sh ++# ++# An example hook script to check the commit log message. ++# Called by "git commit" with one argument, the name of the file ++# that has the commit message. The hook should exit with non-zero ++# status after issuing an appropriate message if it wants to stop the ++# commit. The hook is allowed to edit the commit message file. ++# ++# To enable this hook, rename this file to "commit-msg". ++ ++# Uncomment the below to add a Signed-off-by line to the message. ++# Doing this in a hook is a bad idea in general, but the prepare-commit-msg ++# hook is more suited to it. ++# ++# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p') ++# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1" ++ ++# This example catches duplicate Signed-off-by lines. ++ ++test "" = "$(grep '^Signed-off-by: ' "$1" | ++ sort | uniq -c | sed -e '/^[ ]*1[ ]/d')" || { ++ echo >&2 Duplicate Signed-off-by lines. ++ exit 1 ++} +diff -ruN u-boot-2015.01-rc3/.git/hooks/post-update.sample u-boot/.git/hooks/post-update.sample +--- u-boot-2015.01-rc3/.git/hooks/post-update.sample 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/hooks/post-update.sample 2015-01-01 17:34:05.797936967 +0100 +@@ -0,0 +1,8 @@ ++#!/bin/sh ++# ++# An example hook script to prepare a packed repository for use over ++# dumb transports. ++# ++# To enable this hook, rename this file to "post-update". ++ ++exec git update-server-info +diff -ruN u-boot-2015.01-rc3/.git/hooks/pre-applypatch.sample u-boot/.git/hooks/pre-applypatch.sample +--- u-boot-2015.01-rc3/.git/hooks/pre-applypatch.sample 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/hooks/pre-applypatch.sample 2015-01-01 17:34:05.793937033 +0100 +@@ -0,0 +1,14 @@ ++#!/bin/sh ++# ++# An example hook script to verify what is about to be committed ++# by applypatch from an e-mail message. ++# ++# The hook should exit with non-zero status after issuing an ++# appropriate message if it wants to stop the commit. ++# ++# To enable this hook, rename this file to "pre-applypatch". ++ ++. git-sh-setup ++test -x "$GIT_DIR/hooks/pre-commit" && ++ exec "$GIT_DIR/hooks/pre-commit" ${1+"$@"} ++: +diff -ruN u-boot-2015.01-rc3/.git/hooks/pre-commit.sample u-boot/.git/hooks/pre-commit.sample +--- u-boot-2015.01-rc3/.git/hooks/pre-commit.sample 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/hooks/pre-commit.sample 2015-01-01 17:34:05.793937033 +0100 +@@ -0,0 +1,50 @@ ++#!/bin/sh ++# ++# An example hook script to verify what is about to be committed. ++# Called by "git commit" with no arguments. The hook should ++# exit with non-zero status after issuing an appropriate message if ++# it wants to stop the commit. ++# ++# To enable this hook, rename this file to "pre-commit". ++ ++if git rev-parse --verify HEAD >/dev/null 2>&1 ++then ++ against=HEAD ++else ++ # Initial commit: diff against an empty tree object ++ against=4b825dc642cb6eb9a060e54bf8d69288fbee4904 ++fi ++ ++# If you want to allow non-ascii filenames set this variable to true. ++allownonascii=$(git config hooks.allownonascii) ++ ++# Redirect output to stderr. ++exec 1>&2 ++ ++# Cross platform projects tend to avoid non-ascii filenames; prevent ++# them from being added to the repository. We exploit the fact that the ++# printable range starts at the space character and ends with tilde. ++if [ "$allownonascii" != "true" ] && ++ # Note that the use of brackets around a tr range is ok here, (it's ++ # even required, for portability to Solaris 10's /usr/bin/tr), since ++ # the square bracket bytes happen to fall in the designated range. ++ test $(git diff --cached --name-only --diff-filter=A -z $against | ++ LC_ALL=C tr -d '[ -~]\0' | wc -c) != 0 ++then ++ echo "Error: Attempt to add a non-ascii file name." ++ echo ++ echo "This can cause problems if you want to work" ++ echo "with people on other platforms." ++ echo ++ echo "To be portable it is advisable to rename the file ..." ++ echo ++ echo "If you know what you are doing you can disable this" ++ echo "check using:" ++ echo ++ echo " git config hooks.allownonascii true" ++ echo ++ exit 1 ++fi ++ ++# If there are whitespace errors, print the offending file names and fail. ++exec git diff-index --check --cached $against -- +diff -ruN u-boot-2015.01-rc3/.git/hooks/prepare-commit-msg.sample u-boot/.git/hooks/prepare-commit-msg.sample +--- u-boot-2015.01-rc3/.git/hooks/prepare-commit-msg.sample 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/hooks/prepare-commit-msg.sample 2015-01-01 17:34:05.801936901 +0100 +@@ -0,0 +1,36 @@ ++#!/bin/sh ++# ++# An example hook script to prepare the commit log message. ++# Called by "git commit" with the name of the file that has the ++# commit message, followed by the description of the commit ++# message's source. The hook's purpose is to edit the commit ++# message file. If the hook fails with a non-zero status, ++# the commit is aborted. ++# ++# To enable this hook, rename this file to "prepare-commit-msg". ++ ++# This hook includes three examples. The first comments out the ++# "Conflicts:" part of a merge commit. ++# ++# The second includes the output of "git diff --name-status -r" ++# into the message, just before the "git status" output. It is ++# commented because it doesn't cope with --amend or with squashed ++# commits. ++# ++# The third example adds a Signed-off-by line to the message, that can ++# still be edited. This is rarely a good idea. ++ ++case "$2,$3" in ++ merge,) ++ /usr/bin/perl -i.bak -ne 's/^/# /, s/^# #/#/ if /^Conflicts/ .. /#/; print' "$1" ;; ++ ++# ,|template,) ++# /usr/bin/perl -i.bak -pe ' ++# print "\n" . `git diff --cached --name-status -r` ++# if /^#/ && $first++ == 0' "$1" ;; ++ ++ *) ;; ++esac ++ ++# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p') ++# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1" +diff -ruN u-boot-2015.01-rc3/.git/hooks/pre-rebase.sample u-boot/.git/hooks/pre-rebase.sample +--- u-boot-2015.01-rc3/.git/hooks/pre-rebase.sample 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/hooks/pre-rebase.sample 2015-01-01 17:34:05.801936901 +0100 +@@ -0,0 +1,169 @@ ++#!/bin/sh ++# ++# Copyright (c) 2006, 2008 Junio C Hamano ++# ++# The "pre-rebase" hook is run just before "git rebase" starts doing ++# its job, and can prevent the command from running by exiting with ++# non-zero status. ++# ++# The hook is called with the following parameters: ++# ++# $1 -- the upstream the series was forked from. ++# $2 -- the branch being rebased (or empty when rebasing the current branch). ++# ++# This sample shows how to prevent topic branches that are already ++# merged to 'next' branch from getting rebased, because allowing it ++# would result in rebasing already published history. ++ ++publish=next ++basebranch="$1" ++if test "$#" = 2 ++then ++ topic="refs/heads/$2" ++else ++ topic=`git symbolic-ref HEAD` || ++ exit 0 ;# we do not interrupt rebasing detached HEAD ++fi ++ ++case "$topic" in ++refs/heads/??/*) ++ ;; ++*) ++ exit 0 ;# we do not interrupt others. ++ ;; ++esac ++ ++# Now we are dealing with a topic branch being rebased ++# on top of master. Is it OK to rebase it? ++ ++# Does the topic really exist? ++git show-ref -q "$topic" || { ++ echo >&2 "No such branch $topic" ++ exit 1 ++} ++ ++# Is topic fully merged to master? ++not_in_master=`git rev-list --pretty=oneline ^master "$topic"` ++if test -z "$not_in_master" ++then ++ echo >&2 "$topic is fully merged to master; better remove it." ++ exit 1 ;# we could allow it, but there is no point. ++fi ++ ++# Is topic ever merged to next? If so you should not be rebasing it. ++only_next_1=`git rev-list ^master "^$topic" ${publish} | sort` ++only_next_2=`git rev-list ^master ${publish} | sort` ++if test "$only_next_1" = "$only_next_2" ++then ++ not_in_topic=`git rev-list "^$topic" master` ++ if test -z "$not_in_topic" ++ then ++ echo >&2 "$topic is already up-to-date with master" ++ exit 1 ;# we could allow it, but there is no point. ++ else ++ exit 0 ++ fi ++else ++ not_in_next=`git rev-list --pretty=oneline ^${publish} "$topic"` ++ /usr/bin/perl -e ' ++ my $topic = $ARGV[0]; ++ my $msg = "* $topic has commits already merged to public branch:\n"; ++ my (%not_in_next) = map { ++ /^([0-9a-f]+) /; ++ ($1 => 1); ++ } split(/\n/, $ARGV[1]); ++ for my $elem (map { ++ /^([0-9a-f]+) (.*)$/; ++ [$1 => $2]; ++ } split(/\n/, $ARGV[2])) { ++ if (!exists $not_in_next{$elem->[0]}) { ++ if ($msg) { ++ print STDERR $msg; ++ undef $msg; ++ } ++ print STDERR " $elem->[1]\n"; ++ } ++ } ++ ' "$topic" "$not_in_next" "$not_in_master" ++ exit 1 ++fi ++ ++<<\DOC_END ++ ++This sample hook safeguards topic branches that have been ++published from being rewound. ++ ++The workflow assumed here is: ++ ++ * Once a topic branch forks from "master", "master" is never ++ merged into it again (either directly or indirectly). ++ ++ * Once a topic branch is fully cooked and merged into "master", ++ it is deleted. If you need to build on top of it to correct ++ earlier mistakes, a new topic branch is created by forking at ++ the tip of the "master". This is not strictly necessary, but ++ it makes it easier to keep your history simple. ++ ++ * Whenever you need to test or publish your changes to topic ++ branches, merge them into "next" branch. ++ ++The script, being an example, hardcodes the publish branch name ++to be "next", but it is trivial to make it configurable via ++$GIT_DIR/config mechanism. ++ ++With this workflow, you would want to know: ++ ++(1) ... if a topic branch has ever been merged to "next". Young ++ topic branches can have stupid mistakes you would rather ++ clean up before publishing, and things that have not been ++ merged into other branches can be easily rebased without ++ affecting other people. But once it is published, you would ++ not want to rewind it. ++ ++(2) ... if a topic branch has been fully merged to "master". ++ Then you can delete it. More importantly, you should not ++ build on top of it -- other people may already want to ++ change things related to the topic as patches against your ++ "master", so if you need further changes, it is better to ++ fork the topic (perhaps with the same name) afresh from the ++ tip of "master". ++ ++Let's look at this example: ++ ++ o---o---o---o---o---o---o---o---o---o "next" ++ / / / / ++ / a---a---b A / / ++ / / / / ++ / / c---c---c---c B / ++ / / / \ / ++ / / / b---b C \ / ++ / / / / \ / ++ ---o---o---o---o---o---o---o---o---o---o---o "master" ++ ++ ++A, B and C are topic branches. ++ ++ * A has one fix since it was merged up to "next". ++ ++ * B has finished. It has been fully merged up to "master" and "next", ++ and is ready to be deleted. ++ ++ * C has not merged to "next" at all. ++ ++We would want to allow C to be rebased, refuse A, and encourage ++B to be deleted. ++ ++To compute (1): ++ ++ git rev-list ^master ^topic next ++ git rev-list ^master next ++ ++ if these match, topic has not merged in next at all. ++ ++To compute (2): ++ ++ git rev-list master..topic ++ ++ if this is empty, it is fully merged to "master". ++ ++DOC_END +diff -ruN u-boot-2015.01-rc3/.git/hooks/update.sample u-boot/.git/hooks/update.sample +--- u-boot-2015.01-rc3/.git/hooks/update.sample 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/hooks/update.sample 2015-01-01 17:34:05.793937033 +0100 +@@ -0,0 +1,128 @@ ++#!/bin/sh ++# ++# An example hook script to blocks unannotated tags from entering. ++# Called by "git receive-pack" with arguments: refname sha1-old sha1-new ++# ++# To enable this hook, rename this file to "update". ++# ++# Config ++# ------ ++# hooks.allowunannotated ++# This boolean sets whether unannotated tags will be allowed into the ++# repository. By default they won't be. ++# hooks.allowdeletetag ++# This boolean sets whether deleting tags will be allowed in the ++# repository. By default they won't be. ++# hooks.allowmodifytag ++# This boolean sets whether a tag may be modified after creation. By default ++# it won't be. ++# hooks.allowdeletebranch ++# This boolean sets whether deleting branches will be allowed in the ++# repository. By default they won't be. ++# hooks.denycreatebranch ++# This boolean sets whether remotely creating branches will be denied ++# in the repository. By default this is allowed. ++# ++ ++# --- Command line ++refname="$1" ++oldrev="$2" ++newrev="$3" ++ ++# --- Safety check ++if [ -z "$GIT_DIR" ]; then ++ echo "Don't run this script from the command line." >&2 ++ echo " (if you want, you could supply GIT_DIR then run" >&2 ++ echo " $0 )" >&2 ++ exit 1 ++fi ++ ++if [ -z "$refname" -o -z "$oldrev" -o -z "$newrev" ]; then ++ echo "Usage: $0 " >&2 ++ exit 1 ++fi ++ ++# --- Config ++allowunannotated=$(git config --bool hooks.allowunannotated) ++allowdeletebranch=$(git config --bool hooks.allowdeletebranch) ++denycreatebranch=$(git config --bool hooks.denycreatebranch) ++allowdeletetag=$(git config --bool hooks.allowdeletetag) ++allowmodifytag=$(git config --bool hooks.allowmodifytag) ++ ++# check for no description ++projectdesc=$(sed -e '1q' "$GIT_DIR/description") ++case "$projectdesc" in ++"Unnamed repository"* | "") ++ echo "*** Project description file hasn't been set" >&2 ++ exit 1 ++ ;; ++esac ++ ++# --- Check types ++# if $newrev is 0000...0000, it's a commit to delete a ref. ++zero="0000000000000000000000000000000000000000" ++if [ "$newrev" = "$zero" ]; then ++ newrev_type=delete ++else ++ newrev_type=$(git cat-file -t $newrev) ++fi ++ ++case "$refname","$newrev_type" in ++ refs/tags/*,commit) ++ # un-annotated tag ++ short_refname=${refname##refs/tags/} ++ if [ "$allowunannotated" != "true" ]; then ++ echo "*** The un-annotated tag, $short_refname, is not allowed in this repository" >&2 ++ echo "*** Use 'git tag [ -a | -s ]' for tags you want to propagate." >&2 ++ exit 1 ++ fi ++ ;; ++ refs/tags/*,delete) ++ # delete tag ++ if [ "$allowdeletetag" != "true" ]; then ++ echo "*** Deleting a tag is not allowed in this repository" >&2 ++ exit 1 ++ fi ++ ;; ++ refs/tags/*,tag) ++ # annotated tag ++ if [ "$allowmodifytag" != "true" ] && git rev-parse $refname > /dev/null 2>&1 ++ then ++ echo "*** Tag '$refname' already exists." >&2 ++ echo "*** Modifying a tag is not allowed in this repository." >&2 ++ exit 1 ++ fi ++ ;; ++ refs/heads/*,commit) ++ # branch ++ if [ "$oldrev" = "$zero" -a "$denycreatebranch" = "true" ]; then ++ echo "*** Creating a branch is not allowed in this repository" >&2 ++ exit 1 ++ fi ++ ;; ++ refs/heads/*,delete) ++ # delete branch ++ if [ "$allowdeletebranch" != "true" ]; then ++ echo "*** Deleting a branch is not allowed in this repository" >&2 ++ exit 1 ++ fi ++ ;; ++ refs/remotes/*,commit) ++ # tracking branch ++ ;; ++ refs/remotes/*,delete) ++ # delete tracking branch ++ if [ "$allowdeletebranch" != "true" ]; then ++ echo "*** Deleting a tracking branch is not allowed in this repository" >&2 ++ exit 1 ++ fi ++ ;; ++ *) ++ # Anything else (is there anything else?) ++ echo "*** Update hook: unknown type of update to ref $refname of type $newrev_type" >&2 ++ exit 1 ++ ;; ++esac ++ ++# --- Finished ++exit 0 +Binary files u-boot-2015.01-rc3/.git/index and u-boot/.git/index differ +diff -ruN u-boot-2015.01-rc3/.git/info/exclude u-boot/.git/info/exclude +--- u-boot-2015.01-rc3/.git/info/exclude 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/info/exclude 2015-01-01 17:34:05.789937097 +0100 +@@ -0,0 +1,6 @@ ++# git ls-files --others --exclude-from=.git/info/exclude ++# Lines that start with '#' are comments. ++# For a project mostly in C, the following would be a good set of ++# exclude patterns (uncomment them if you want to use them): ++# *.[oa] ++# *~ +diff -ruN u-boot-2015.01-rc3/.git/logs/HEAD u-boot/.git/logs/HEAD +--- u-boot-2015.01-rc3/.git/logs/HEAD 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/logs/HEAD 2015-01-01 17:34:31.953508170 +0100 +@@ -0,0 +1 @@ ++0000000000000000000000000000000000000000 125738e819a3b9d15210794b3dcef9f4d9bcf866 Zoltan HERPAI 1420130071 +0100 clone: from git://git.denx.de/u-boot.git +diff -ruN u-boot-2015.01-rc3/.git/logs/refs/heads/master u-boot/.git/logs/refs/heads/master +--- u-boot-2015.01-rc3/.git/logs/refs/heads/master 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/logs/refs/heads/master 2015-01-01 17:34:31.953508170 +0100 +@@ -0,0 +1 @@ ++0000000000000000000000000000000000000000 125738e819a3b9d15210794b3dcef9f4d9bcf866 Zoltan HERPAI 1420130071 +0100 clone: from git://git.denx.de/u-boot.git +diff -ruN u-boot-2015.01-rc3/.git/logs/refs/remotes/origin/HEAD u-boot/.git/logs/refs/remotes/origin/HEAD +--- u-boot-2015.01-rc3/.git/logs/refs/remotes/origin/HEAD 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/logs/refs/remotes/origin/HEAD 2015-01-01 17:34:31.953508170 +0100 +@@ -0,0 +1 @@ ++0000000000000000000000000000000000000000 125738e819a3b9d15210794b3dcef9f4d9bcf866 Zoltan HERPAI 1420130071 +0100 clone: from git://git.denx.de/u-boot.git +Binary files u-boot-2015.01-rc3/.git/objects/pack/pack-e62dd83e4128e234ff5dabb586722d23d1bae06c.idx and u-boot/.git/objects/pack/pack-e62dd83e4128e234ff5dabb586722d23d1bae06c.idx differ +Binary files u-boot-2015.01-rc3/.git/objects/pack/pack-e62dd83e4128e234ff5dabb586722d23d1bae06c.pack and u-boot/.git/objects/pack/pack-e62dd83e4128e234ff5dabb586722d23d1bae06c.pack differ +diff -ruN u-boot-2015.01-rc3/.git/packed-refs u-boot/.git/packed-refs +--- u-boot-2015.01-rc3/.git/packed-refs 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/packed-refs 2015-01-01 17:34:31.865509612 +0100 +@@ -0,0 +1,388 @@ ++# pack-refs with: peeled ++125738e819a3b9d15210794b3dcef9f4d9bcf866 refs/remotes/origin/master ++ece0d370144fdecb6f3ed5738ffe96f5b12f9e96 refs/remotes/origin/next ++cd5b2b9941d5b6f6596787ebdb03c215d91fc44d refs/remotes/origin/origin ++f20393c5e787b3776c179d20f82a86bda124d651 refs/remotes/origin/u-boot-2009.11.y ++e8ae0fa5edd152b2b29c470b88429be4cdcd2c46 refs/remotes/origin/u-boot-2013.01.y ++be360d9824d653780ebd3ffc08f1938a8e3dd747 refs/tags/DENX-2005-10-29-2350 ++384ae02506f0673070a3516b1858f058a07f85f3 refs/tags/LABEL_2002_11_05_0120 ++56f94be3ef63732384063e110277ed89701b6471 refs/tags/LABEL_2002_11_05_1735 ++7f6c2cbc2bc0721c41bb776242c0b18ec70328e4 refs/tags/LABEL_2002_11_10_2310 ++1d0350ed0b1b0f63e3fb5db6b19397b84a2ea1c7 refs/tags/LABEL_2002_11_11_2211 ++2262cfeef91458b01a1bfe3812ccbbfdf8b82807 refs/tags/LABEL_2002_11_18_0115 ++ea909b7604306a400ee3abf57e2fa7b2dde5dde1 refs/tags/LABEL_2002_11_22_0015 ++a6c7ad2f65afaa717ba19cbf9d8d138b5f10ccf9 refs/tags/LABEL_2002_12_03_2230 ++7c7a23bd5a0bc149d2edd665ec46381726b24e0c refs/tags/LABEL_2002_12_07_0120 ++288b3d7f5a54c987ecdfc5add4c7c25d36a9a3e1 refs/tags/LABEL_2002_12_21_0040 ++13122b4f1d6d00d6d4993ef56d9b5c5bd24f431e refs/tags/LABEL_2002_12_28_1700 ++d0fb80c3021e15853895e9ae45ab9368d0fb52fa refs/tags/LABEL_2003_01_11_1050 ++608c91460b37fd9fe0088a0ce813a443f116a8d5 refs/tags/LABEL_2003_01_14_0055 ++6069ff265362ef6239749b5f598b137f407b821e refs/tags/LABEL_2003_02_28_0150 ++43d9616cffb4a130e1620e3e33fc9bc1bcabe399 refs/tags/LABEL_2003_03_06_0050 ++db2f721ffcf9693086a7e5c6c7015f2019e7f52e refs/tags/LABEL_2003_03_06_0200 ++500545cc6b83958209128bffa825b3c842a21a4e refs/tags/LABEL_2003_03_06_1440 ++1cb8e980c41e86760fa93de63f4e4cf643bef9d9 refs/tags/LABEL_2003_03_06_2255 ++1957dd29d980ecb197c3a6dbe4f6609dae135a1d refs/tags/LABEL_2003_03_14_2150 ++10f670178cce29d7f078ca622f0eeafd6903748a refs/tags/LABEL_2003_03_25_1830 ++ac6dbb85b7f080d923013bff4e1d5267cb6f8a5a refs/tags/LABEL_2003_03_26_1300 ++cdd8a0f1517b89349265465bf334db32e2304b45 refs/tags/LABEL_2003_03_27_1900 ++3e38691e8f7aa0d9b498d76c7279ddec6e4946f3 refs/tags/LABEL_2003_04_05_0300 ++4a6fd34b267dbf4a72080ab9a085bb45c63660fb refs/tags/LABEL_2003_04_15_1900 ++7aa78614716b7bd7bdf68553f261ad0d5a12826a refs/tags/LABEL_2003_05_03_1700 ++45219c46605f9b933ab454738ee4ce543d5b70d6 refs/tags/LABEL_2003_05_12_2355 ++7f70e85309c6367138c0ebd14abdd49964b8d50a refs/tags/LABEL_2003_05_20_1630 ++82226bf4d2fe87076d7f5d7e2677fdd5d0e35fc2 refs/tags/LABEL_2003_05_20_2250 ++c8c3a8be2dd09e51d7dc33f431e3a638ac5688f2 refs/tags/LABEL_2003_05_22_2230 ++5d232d0e7ea982d859d028ab482d95eb68460b19 refs/tags/LABEL_2003_05_23_0055 ++4c3b21a5f915988e3d9681cf9cb566bb7bd56859 refs/tags/LABEL_2003_05_23_1450 ++3b57fe0a70b903f4db66c558bb9828bc58acf06b refs/tags/LABEL_2003_05_30_1450 ++7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed refs/tags/LABEL_2003_05_31_2115 ++682011ff6968198da14b89e40d9f55b00f6d91f7 refs/tags/LABEL_2003_06_04_0200 ++a3ed3996cdb9fca78329f6aca62d235263b7da90 refs/tags/LABEL_2003_06_05_2140 ++71f9511803de65a3b98d2f592d418da1d1539f13 refs/tags/LABEL_2003_06_16_0055 ++9a0e21a3a87830f66a93c17d1bca66fd12d860ae refs/tags/LABEL_2003_06_22_1530 ++b783edaee8252bfdba3f7b3fd29519a81ce71e42 refs/tags/LABEL_2003_06_26_2220 ++8bde7f776c77b343aca29b8c7b58464d915ac245 refs/tags/LABEL_2003_06_27_2340 ++91a0ce965d5905c37fff45555b7e3113b9359c8f refs/tags/LABEL_2003_06_28_0050-stable ++ef0630617e0f52dabb2cf7073df281e680073ec1 refs/tags/LABEL_2003_06_28_0130-stable ++ed579b4210cc5341d511e090239ca697e91ad728 refs/tags/LABEL_2003_06_28_1800-stable ++eeacb89cb311fe273fef0f20b2bacf589b36f8f4 refs/tags/LABEL_2003_06_29_0145 ++7152b1d0b3f8beec8c297d64664e41b4c4ef610a refs/tags/LABEL_2003_09_06_0055 ++4f7cb08ee7b48a511a9cd2398fd4a243ca2733c7 refs/tags/LABEL_2003_09_12_0110 ++f5300ab241898c490231e59229e6312aa862ce52 refs/tags/LABEL_2003_09_12_1745 ++531716e1710083f91d9fa351f89d18e271b5c577 refs/tags/LABEL_2003_09_13_2100 ++34b3049a60a37e180d73332ccddf706c049a0515 refs/tags/LABEL_2003_09_16_2310 ++80369866a482b923f0398f4c8172865282559f5b refs/tags/LABEL_2003_09_18_2045 ++bb65a312675f3cd1923a5cbe325ad9ca1703fc58 refs/tags/LABEL_2003_10_01_1830 ++fbe4b5cbdea438ccec0d93de443f367f3ba46196 refs/tags/LABEL_2003_10_06_2355 ++a0ff7f2eda50de4d4096265a086c94ac640fab7c refs/tags/LABEL_2003_10_09_1515 ++5da627a424b3ad2d38a81886ba4a18e5123a6788 refs/tags/LABEL_2003_10_09_2320 ++f72da3406bf6f1c1bce9aa03b07d070413a916af refs/tags/LABEL_2003_10_10_1200 ++2d5b561e2bfdee8552a99b2cf93016cce2a74895 refs/tags/LABEL_2003_10_14_2140 ++42d1f0394bef0624fc9664714d54bb137931d6a6 refs/tags/LABEL_2003_10_16_0200 ++d7281f41094bee59eca958de3c04995a2f79034a refs/tags/LABEL_2003_10_20_0025 ++b4757cee52597ab5a67c30a1bf2a3208209e1ccb refs/tags/LABEL_2003_11_26_MKR ++fa1399ed127c8be507bf182dc7d8d61a54938d79 refs/tags/LABEL_2003_12_06_1550 ++5e4be00fb037feb6476125d044b98e0e22b70d31 refs/tags/LABEL_2004_01_21_2110 ++6876609446980c3055bbd32c195a63330e21d8e6 refs/tags/LABEL_2004_01_29_1030 ++a2d18bb7d31e7b971386fef505ff0218f3b6e893 refs/tags/LABEL_2004_02_11_2240 ++cf56e1101957c09cb4aafcf28a89658c4649c511 refs/tags/LABEL_2004_02_20_2310 ++5cfbab3d822cb690be6d4f1793aab0cea761134c refs/tags/LABEL_2004_02_24_0305 ++232c150a250bb2fcb894b15d67c65df2458e271f refs/tags/LABEL_2004_03_12_0130 ++42dfe7a1844cbad7114038aaf03828acb7a84414 refs/tags/LABEL_2004_03_14_2340 ++d9df1f4e662441c487f96a4e1f91caa9297afdd9 refs/tags/LABEL_2004_03_16_2330 ++b79a11cc2bda7a4d5e00444427a0d06b4e86a990 refs/tags/LABEL_2004_03_25_1630 ++998eaaecd46ee5f00550e30e606cb5556e0b9345 refs/tags/LABEL_2004_04_18_2135 ++5cf91d6bdc3e60bd43f9ba1bbb97a43ee49b2b2d refs/tags/LABEL_2004_04_23_2240 ++e4cc71aa4403c82f0b3e89087024f83832ece9ec refs/tags/LABEL_2004_05_19_2335 ++69459791268d48c7081802dbc7a51d4e42c8a8cd refs/tags/LABEL_2004_05_29_1850 ++021bfcd3c624ce88f739f01ba4220197bdd47a5e refs/tags/LABEL_2004_06_24_1800 ++e94d2cd9d1dc0f58b18e7c31fc9345129b1a44fb refs/tags/LABEL_2004_07_01_1200 ++31a649234ee4051e96cf45285cdf2dbfa668d30c refs/tags/LABEL_2004_08_28_2355 ++7ca202f566a6e9dc3d0dd0216e82ad1a48f50f19 refs/tags/LABEL_2004_08_29_0045 ++eedcd078fe1434d93b84322c4e14c52f80282a41 refs/tags/LABEL_2004_09_09_0000 ++8b74bf31fe57edfc502f94e905977304eac943ca refs/tags/LABEL_2004_10_12_0110 ++14699a22cf47b83995d19877d2b938b2270defc0 refs/tags/LABEL_2004_10_20_0020 ++cacfab588a897c369a4906818c5ed4bc40a450c5 refs/tags/LABEL_2004_11_17_2222 ++ed54e6212518262d27abe5e6de3c608d5ebceafb refs/tags/LABEL_2004_11_25_0035 ++f7d1572bf51619554f278cb543ef0445baa3a1f8 refs/tags/LABEL_2004_12_18_2335 ++bff96b0e6bdf8551e8468b111177c553e4994db2 refs/tags/LABEL_2004_12_19_1100 ++08f272787a93cb11338fd81ab92a7439a361e3b2 refs/tags/LABEL_2004_12_19_2240 ++400ab719c6025c176c50bcdff342384222d7424b refs/tags/LABEL_2004_12_20_1220 ++436be29cad60a46ed5983120aff71909d8f234a3 refs/tags/LABEL_2005_01_31_2245 ++e799d3755e83c70bf8c92977190d1777b390a8de refs/tags/LABEL_2005_02_07_2045 ++b9649854f6ffdeaad23daec21013552cef2e05f0 refs/tags/LABEL_2005_02_08_1615 ++e58cf2a0cfeb357faa134af1e12b96f4109af360 refs/tags/LABEL_2005_02_28_0050 ++f4733a0764741966a5e842968166b40fb062d577 refs/tags/LABEL_2005_03_06_0225 ++911d08f6ae244c6407fff268585e5b9544ce8adb refs/tags/LABEL_2005_03_15_0125 ++f5c5ef4a1fa7dcf90fd74f795a131d07377406ab refs/tags/LABEL_2005_04_05_1830 ++12b43d515c62682fcf7b578f31920a2be49142fe refs/tags/LABEL_2005_04_05_2345 ++5e5f9ed254e20b830fef5f42a52ac0bbdc92a57e refs/tags/LABEL_2005_04_14_0115 ++412babe304b948e1e3a909f8d2eb091b83f700d5 refs/tags/LABEL_2005_05_05_1920 ++ed16fefcbaf99a67a7dd7639898dbc896c70cb1b refs/tags/LABEL_2005_05_09_1245 ++9dd41a7b0c5c94d74c25edfdd6393c656669c09a refs/tags/LABEL_2005_05_13_0050 ++88804d19e2bf36c9eaefadbd7199c093c900953b refs/tags/LABEL_2005_07_04_0202 ++dafba16e6fc1837381c8e74c4891ad6965cf54ab refs/tags/LABEL_2005_08_12_0050 ++053b40fa0c90d885b00c29c9c4490924801809f7 refs/tags/LABEL_2005_09_15_2320 ++eb394f56db3e05d00891d6dc36a00df0025cf255 refs/tags/LABEL_2006_03_12_0025 ++^84ef51a632063e8cb57b2e9a4252497512831ffe ++9bf86baaa3b35b25baa2d664e2f7f6cafad689ee refs/tags/LABEL_2006_04_18_1106 ++^8419c013048b1f15f3fa2fc7c0463d860a04ee3e ++7a4978bc272e20c7febd15d76786c7d9b86a98cd refs/tags/LABEL_2006_05_10_1800 ++^977b50f86824fe3c262ef7efce5dbb7ddaf8a48f ++c7071e6d645a8e13adb0d4cea2caad27213fa62f refs/tags/LABEL_2006_05_19_1133 ++^5770a1e488621a9e7e344afed7c921ff4e715a63 ++b11752921b5d22dcfda237e035a86470993e887b refs/tags/LABEL_2006_06_30_2020 ++^3f7a63e6a34c5b435864c860c1563117e45d1c35 ++2f91a3d0f8a73665423eb6ab17689c67f05e0887 refs/tags/U-Boot-0_2_0 ++60fbe254243ec461ec73da13132be098db33d3fa refs/tags/U-Boot-0_3_0 ++02c9bed451b36f3b1f11d5fe617da4fe4b9f9ab7 refs/tags/U-Boot-0_3_1 ++993cad9364c6b87ae429d1ed1130d8153f6f027e refs/tags/U-Boot-0_4_0 ++b0fce99bfc116c2ddb4506268d6e4a0a7054478d refs/tags/U-Boot-0_4_1 ++f12e568ca45f6c56b5a6d52a43524987e141abe7 refs/tags/U-Boot-0_4_2 ++ad12965db5d145f7cf7595cbeaf03b3402f42897 refs/tags/U-Boot-0_4_3 ++945af8d723a29e9b6289d84250745ed0dc16fc81 refs/tags/U-Boot-0_4_4 ++ae3af05ec986a8ac66dadb5eafe13db2d4a02c5c refs/tags/U-Boot-0_4_5 ++e0ac62d798ce60ec5d43125d4786e58b0d881836 refs/tags/U-Boot-0_4_6 ++0cb61d7dddb0d8c087f6df46a74815950668c97b refs/tags/U-Boot-0_4_7 ++7205e4075d8b50e4dd89fe39ed03860b23cbb704 refs/tags/U-Boot-0_4_8 ++b13fb01a62708492cae4b33c4d6fa9ae127905f4 refs/tags/U-Boot-1_0_0 ++b299e41a0d34bf96202d9bbb72739bdd9414b0cc refs/tags/U-Boot-1_0_1 ++198ea9e294e38cea49f9f2d9b911bdfdd20e48dc refs/tags/U-Boot-1_0_2 ++f525c8a1476945b078ce4ffe6cf768c286cbf8cc refs/tags/U-Boot-1_1_0 ++08f1080c9cbde2a500e6efe8bc5647a68f183c91 refs/tags/U-Boot-1_1_1 ++15c7a8efd2f7275e5b3249aac305f2598a998645 refs/tags/U-Boot-1_1_2 ++2893ecbf3e5b983970138289b759baf45a327ff3 refs/tags/U-Boot-1_1_3 ++74ad4b4fef966ab4cc7192b5b3808ec95e60570b refs/tags/U-Boot-1_1_4 ++^e6b6d16de73de6a76e2ec4338291e828b860f040 ++b7487ff5a5d41e379809509b9a07546e73577dc8 refs/tags/U-Boot-1_1_5 ++^ba999c531ed16ec749b2b6f4b0133cee38842b91 ++ba89ef3908907cf55a5bff6ba211b8d8c2b08800 refs/tags/U-Boot-1_1_6 ++^c59200443072353044aa4bf737a5a60f9a9af231 ++eb8fae4983cfe07fe7c785f483f2278b6146463a refs/tags/U-Boot-1_2_0 ++^f4eb54529bb3664c3a562e488b460fe075f79d67 ++d9af3c87df93e1a8126b1a52adf8db978e9a0d40 refs/tags/U_BOOT_0_1_0 ++69a193a815e7f0b35eeeb013a1f1e0cd9e590f92 refs/tags/v1.3.0 ++^9a337ddc154a10a26f117fd147b009abcdeba75a ++6b894f3c3eac06420acad28e70621c5ba410b321 refs/tags/v1.3.0-rc1 ++^ff7640c9ead8806b5d827f2b29f9cb2632add729 ++a5d674296b4a991efdb708a9c8d6c78d4e47f565 refs/tags/v1.3.0-rc2 ++^66dcad3a9a53e0766d90e0084123bd8529522fb0 ++bf58489ae2e0de9bd2d7a6ebdbfdb655b48f0c09 refs/tags/v1.3.0-rc3 ++^636400198228d96983c06657b17f760f5989958e ++409530dcb489cf4c24fab977ca041dac27ff9f28 refs/tags/v1.3.0-rc4 ++^5947f6999aafa7c54c1390983d264a8463dfea8e ++2006af48494237562529cfdb111681149e0f13e9 refs/tags/v1.3.1 ++^41be969f4957115ed7b1fe8b890bfaee99d7a7a2 ++b67a97f26c406e9116fc85f5dcad4917b7a1c801 refs/tags/v1.3.1-rc1 ++^8d4f040a3c15036a6ea25a9c39e7d89fefa8440d ++2b0e9596bac7d2776431657488db88703ba1d441 refs/tags/v1.3.2 ++^30f1806f60978d707b0cff2d7bf89d141fc24290 ++1dec865fbd4b229061233c504166443f623335db refs/tags/v1.3.2-rc1 ++^67a4389e39ad853d65b72e2b7cad15c7e8291147 ++c19f1e9b9a8794d488221a9cc3a60db03b7ccc5a refs/tags/v1.3.2-rc2 ++^b29661fc1151077776454288051bc9a488351ce8 ++955a05aa4445c5652c53e06254d420d7dffd49a6 refs/tags/v1.3.2-rc3 ++^661bad63a076a96c39c64f136915f146725af92b ++01348d89a001323ae51dda449decea61092e008b refs/tags/v1.3.3 ++^180a90abdae72587c0f679edf8991455e559440d ++33a7d077fd81772d263a4e91a5aebe585c5362ca refs/tags/v1.3.3-rc1 ++^fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c ++5ee1a6e902f3b76f672587bb7be4600ab9af1c34 refs/tags/v1.3.3-rc2 ++^76617299358ebba260ecc02d33e8e75d8d13dd3b ++239f0883ea3a9f511f8925619d30a0dc9ea8fe01 refs/tags/v1.3.3-rc3 ++^6adf61dc4cb5c53a2df990cbc8df2bceacbfd869 ++5978b7d69fc40ee9512a6c1b5a3216019ee8e847 refs/tags/v1.3.4 ++^cd82919e6c8a73b363a26f34b734923844e52d1c ++7cbbab2ab61f4f726fac1ff6b8bf2dfd26f2b3ba refs/tags/v1.3.4-rc1 ++^699f05125509249072a0b865c8d35520d97cd501 ++69be245e15510af0756aafb01020f9752ff7e066 refs/tags/v1.3.4-rc2 ++^4b50cd12a3b3c644153c4cf393f4a4c12289e5aa ++624c2d518b6dfc652db6fcbc969bbd93f9821322 refs/tags/v2008.10 ++^b59b16ca24bc7e77ec113021a6d77b9b32fcf192 ++3033c74cb0ad3dfbb1733a36f72f2f4496ba1863 refs/tags/v2008.10-rc1 ++^8b9e4787641719d709bfa2ebeb72e8bd4952bee7 ++2071c4239c250da6c8cbc93aa1d74b503acb2507 refs/tags/v2008.10-rc2 ++^c0d2f87d6c450128b88e73eea715fa3654f65b6c ++789d45f945bc37e721b91923388a91a4f4fcbedb refs/tags/v2008.10-rc3 ++^b4dbacf69a669a17487054552fc2761149dd6767 ++c2d264a1e4540f09e7098a42d094bf6724567043 refs/tags/v2009.01 ++^72d15e705bc3983884105cb7755c7ba80e74a0a5 ++866b1cc6f942be4e2669c17e390cd552abc68e3e refs/tags/v2009.01-rc1 ++^aced78d852d0b009e8aaa1445af8cb40861ee549 ++35ca1e5e625049dbad16ce4cb273e5af47706a23 refs/tags/v2009.01-rc2 ++^0e3ece33801e377be67ffa29f083421ad820f28b ++79f73ea6d9d81ce14a839fa4cc24d1a3ad0975fc refs/tags/v2009.01-rc3 ++^635e5f8fc82365e6e9734b3132bc95135a6de679 ++661e77d04058f94336f621e41b7b341a3b503833 refs/tags/v2009.03 ++^e60beb13cf0135dc71c541021487b5ccc4d269cb ++0eb92888fc505ffc6bc58a5e7bedc0ae127279fa refs/tags/v2009.03-rc1 ++^32688e572ff96715b41420e9a7f280db6c399b65 ++0e34d8aa7974c11a5fd9afe983e9c277e02ef358 refs/tags/v2009.03-rc2 ++^b3dd629e78870ba2dc9f8032978721c0fa02a856 ++d70da93b038dbee50cb3e84cc0db25aab424a772 refs/tags/v2009.06 ++^6b1f78ae6ad037382ad430b07064105c88f7ac02 ++4cb5ec6e36792f300ecbe4e67eb6931848e0bace refs/tags/v2009.06-rc1 ++^6b8edfde22acc574b5532e9f086e6a7287a9bc78 ++210d415558d01a195f98360b127e3f4eb3bb933b refs/tags/v2009.06-rc2 ++^a2e0ffcf2d9a22c582a93e84a4bef20fd3877f47 ++95bd78f93cfc903186e88fc58deac036c401cfbc refs/tags/v2009.06-rc3 ++^580611cb0932143fc2d7a735cfa9ce1ef34d6002 ++e99ab567a1a6848b871a9af8cab3ad2c0c49647a refs/tags/v2009.08 ++^3d35d87d5482de23cd5dc4d7721b1086107cae50 ++e2447f7b3a5336462dd3bebf9a10fc368461b023 refs/tags/v2009.08-rc1 ++^94978e19f31d225b4f7d97c4acbac1ecfaeb8f69 ++6f03d260e53b1263471e5c3e690ddfe43b53d959 refs/tags/v2009.08-rc2 ++^eb1a4d0a471505c169bef19a73a60f8641f0b875 ++9ab87511114da4af82dbdf745edc7478d3e3f274 refs/tags/v2009.08-rc3 ++^963f2f611741f8d9c38bd7caf20ae8c95cab7b3f ++bd1e74b1989e22fe19f8809cacfbf9cbbf4eaf20 refs/tags/v2009.11 ++^a200a7c04d89853d2a1395b96d8ca5e3dd754551 ++815f048382dc123c29baa41238a89f820876bf1e refs/tags/v2009.11-rc1 ++^4946775c6db52dba28f72ba3525764b54f1d4593 ++4c682c60e20b5624868ed6aa214d073cfb8dc0a6 refs/tags/v2009.11-rc2 ++^0fc52948bda0734431cb528ee4fd82f1dec8c7b5 ++9fd828dddea4306b99670d07366fe3f7c1052d08 refs/tags/v2009.11.1 ++^f20393c5e787b3776c179d20f82a86bda124d651 ++65bc917e953601b09965e5fcdfbe4f6c75547e50 refs/tags/v2010.03 ++^ca6e1c136ddb720c3bb2cc043b99f7f06bc46c55 ++537c2a51feed445384aa43e482e4ddc0b5549a75 refs/tags/v2010.03-rc1 ++^93910edb595a88d394da3eb2cf5148096155dfe9 ++273a6decf55982f7a5263d17559b94281f36caf7 refs/tags/v2010.03-rc2 ++^152dda3d94e97ede7af3f9560a59a659384d4585 ++3ef91195a43e6a229290977d70bb913008db2dc9 refs/tags/v2010.03-rc3 ++^2883cc2d48e99fd1873ef8af03fee7966611b735 ++41d5718ee6fb36a1282cde6c86b55f83b62278e1 refs/tags/v2010.06 ++^a59e27997637a2395ae2cc7f809127f24119a167 ++096e50e0a8934f4e083d43d5711d611eebe82607 refs/tags/v2010.06-rc1 ++^01f03bda5b22e5aeae5f02fd537da97a41485c73 ++a42fe9aa726cd3d64c3fcf11eea0bc531ee8d281 refs/tags/v2010.06-rc2 ++^a9046b9e1aeeedc66ddf1d00474ad0ce8c6aa6e4 ++17d61cb4e86f3dc4e7deaa0042fe6d6a6afff8f3 refs/tags/v2010.06-rc3 ++^482126e27b3dbf0e69a6445da8b94b3551adf05d ++f7b386b1df73ff213287eed6ca1b74bb91da1b05 refs/tags/v2010.09 ++^1e4e5ef0469050f014aee1204dae8a9ab6053e49 ++c988fb931f8c8f5d9ce1fc6ca2c20219bcd0fc10 refs/tags/v2010.09-rc1 ++^2d941de9d5c7ba00dc19787dfa0aac2949fd00fb ++09012d353eaf26310dc3ddb1915a3d3504ab9a27 refs/tags/v2010.09-rc2 ++^07517e7f4f582d1607adbc444bab75af3ac4a7f9 ++d0e3a3f4574f1f51ae3d7c5605b7ea5c6df929d4 refs/tags/v2010.12 ++^250ef029844be2cb98635f265359396866d1749f ++5aeba5ba231ccceba84dd2311b1dae645b75bfdc refs/tags/v2010.12-rc1 ++^908614f20f7f0f5df736eed21b88e81ebbf14e86 ++a1904f2bc34e97d79483bcefc35b188620ee9089 refs/tags/v2010.12-rc2 ++^d0d2271f8c62e830ec65fb069b6d12dd708e3e2f ++9bde025ff24c811c02d2a7e6451a57ea63895b3a refs/tags/v2010.12-rc3 ++^3ac45988ab1605baaf83bd3acb80a197c9a208c2 ++b29fbb347698286935bfc401c08499a6f63479de refs/tags/v2011.03 ++^19b54a701811220221fc4d5089a2bb18892018ca ++2360c73ed79d91fe75c297c8a62b2810e8eef281 refs/tags/v2011.03-rc1 ++^42d44f631c4e8e5359775bdc098f2fffde4e5c05 ++38c5af4db86a3e7feaff5092b136722c53784c03 refs/tags/v2011.03-rc2 ++^cb815e5ff979e36d68df130a810d34de4bf93289 ++54d5e1052f16fe5e3337600f485b13b4c6204972 refs/tags/v2011.06 ++^b1af6f532e0d348b153d5c148369229d24af361a ++4d0984f19a46afd17d1ca843deacc5bbedd95eda refs/tags/v2011.06-rc1 ++^7a82c208143bbc774ffcb4e53239410f867a0794 ++1b885e3346f4e06463949dcca3f9444d3d76eeda refs/tags/v2011.06-rc2 ++^6f4dd40cddbd69c56fec1285fee02cbd5a3833d8 ++0431724fde21417139eb1209ea8b562235c64c6e refs/tags/v2011.06-rc3 ++^79cfe422615c010a75ece41662a05cd432ada389 ++58fb473021fd5377db6cb934ea7032da885f80b7 refs/tags/v2011.09 ++^1d5e7fb403257d62f0f2419cb83fdf6b0f02f215 ++86773b53d37288d8ad16f27b93fd948ff11f8012 refs/tags/v2011.09-rc1 ++^6ceb0135f96d73063ffbaab5be7ce23933367388 ++00e61f6907d4ecc2e41f4ba61da74e7cc8665e29 refs/tags/v2011.09-rc2 ++^bc196029f53c2d82eb9a12eb8b66e696b6284941 ++d0b049d45ae734fa473894ae6fd9f4d7d2437cc5 refs/tags/v2011.12 ++^cba9a894fdb1cb49b60fcd1d1d6919cbd7995dd5 ++ee26bfcef5eb5cb4481eb073924cddc22ea2e423 refs/tags/v2011.12-rc1 ++^5738946be46c513fd945d3e1d8f8a0fa718b7c58 ++db9c62b847eab7d42b396ee59cbf4e5e75f02fc6 refs/tags/v2011.12-rc2 ++^901de79a3792c81aefcbf207a34049e63f21362b ++d18276f86b5bed7646749a6a81ae94af79578d5f refs/tags/v2011.12-rc3 ++^be662e9a6b7bf27cb7bc06de18f3c51b2ea80160 ++5910ada22359d6cd06b9299f1ef6020a1ea2b893 refs/tags/v2012.04 ++^2790bf69dc12fb9aeb9836904e5f57c7f83d5552 ++bf41e44b53ad476c47da12f985115d2f073c716d refs/tags/v2012.04-rc1 ++^c008b6f6dd6b8965e9a7654ffbce75bb9ff7a3b5 ++b9c6ec5eb3eaa4471b32e92f48d6df2867020738 refs/tags/v2012.04-rc2 ++^f5cdc11775c4b7fdbf52a6dd2f463d329804ab11 ++d2062de0a3356d2e5c4b9ee6b7c805f0ac5cef37 refs/tags/v2012.04-rc3 ++^fb14b6b2f680363678b4e6a75eb9f3f0d79111fa ++b75d3092239fc5e0e05571d91a380eb8d90d2f45 refs/tags/v2012.04.01 ++^415d386877df49eb051b85ef74fa59a16dc17c7d ++d8679b1a4e01cfc7e90be484f4feafdcf153f3a1 refs/tags/v2012.07 ++^190649fb4309d1bc0fe7732fd0f951cb6440f935 ++ea406aa0f20923152f447108f189bd6e84f2b082 refs/tags/v2012.07-rc1 ++^211e47549b668c7cdd8658c0413a272f0d0495d4 ++5f4bc90c127618f5022d0086d329bbacab9c2b9b refs/tags/v2012.07-rc2 ++^8b10652d6d9cc05023b5a6b73840078066f95a50 ++473fff580bfa77b2f4b4dcecbb63ede28f8da5fa refs/tags/v2012.07-rc3 ++^c627faf637f5fe091bdb6846a52b16983e97b262 ++5aad5045f59029384c11058970caa31de2cfa514 refs/tags/v2012.10 ++^6528ff0109d81c1f21d20f9f1370782bccf87bcb ++91c92e05eb518c1697c64e30e6887aa59a4fde44 refs/tags/v2012.10-rc1 ++^ee1f4caaa2a3f79d692155eec8a4c7289d60e106 ++3b07d3f76ca3b0bb41b463291f8456918ecc7df9 refs/tags/v2012.10-rc2 ++^221953d41dea8dce027b9ce6beee700d97ac2c83 ++7f2daf884129488975dd5f41d87730b26532e128 refs/tags/v2012.10-rc3 ++^c7c63221439ad87a8c05e7b42f9eae32ec7cc2d4 ++35c192cf449860aec8766e20a51bf2052a1dc968 refs/tags/v2013.01 ++^3a9d879f6f64585b819af728b53be0a05037fe0d ++02eac6cbf79f854495705a5cf074b9b31ebdef47 refs/tags/v2013.01-rc1 ++^3ae7b240ad8c723d02aa79654220a07049b7ae4d ++e99406154b90847a729cfef176c5b0681b8fbf62 refs/tags/v2013.01-rc2 ++^ebbf0d20aa85f623c49b7ed3349ebfea450c152d ++32811f96f8259013d054deddb4d3b67a3d3092aa refs/tags/v2013.01-rc3 ++^6fb4d74e59750b43f00d460c569e8a30c67c5bb0 ++8512592e47cc968d2d6eb788acde761ebc3acbf6 refs/tags/v2013.01.01 ++^e8ae0fa5edd152b2b29c470b88429be4cdcd2c46 ++eb34b5ea26363ff349dee46ec6fb90fbc2198495 refs/tags/v2013.04 ++^d10f68ae47b67acab8b110b5c605dde4197a1820 ++734a826d8508b7ca8131381f1fb9ad36e7e98432 refs/tags/v2013.04-rc1 ++^2536850d7cd90bdb75bf3ff86838f913392b68db ++8a7f04c4b3fe8ecb0b8af5c285cd2e252f60482e refs/tags/v2013.04-rc2 ++^c8142633e169665b246352918df5b76fd243bb71 ++83be647fa85edeb64c98d2d61114ca30de30e308 refs/tags/v2013.04-rc3 ++^cba6494f24d711ba63afb22b1ee691a41fee121c ++9e96446a0bf49683dad66708579873a3b6c4f068 refs/tags/v2013.07 ++^62c175fbb8a0f9a926c88294ea9f7e88eb898f6c ++7a42d4e7aa2788b653927904e03ec20793823a19 refs/tags/v2013.07-rc1 ++^216a793cc1702227fd4ad624080f585038d1fa45 ++4d5aaff0a76a07d28051134d7301d25a74a3a32e refs/tags/v2013.07-rc2 ++^e6bf18dba2a21bebf2c421b1c2e188225f6485a1 ++3060931a37a2417275a24400a6eb60abeb1a176a refs/tags/v2013.07-rc3 ++^68c517eafcb060aa8ef92ed2620f0f41c5275d89 ++2d65a6b5a3f069ea92ee33c1c925d79610af12d0 refs/tags/v2013.10 ++^183acb700378a8cfc5d50a01a65de93fb2c24586 ++ff92b6e5cf51421163e4ea1d29004eeffd6b6a99 refs/tags/v2013.10-rc1 ++^40a60c6e8bdd00330310eaa351c9391e74d0bc2c ++bab9dca36165be177a74ff31eabda75f94e26599 refs/tags/v2013.10-rc2 ++^fb18fa95a14ae875ef0a5421cd9fecc00c7c3a4c ++c1d48b0698c9b7ddf342f5808d3a4a973317c2dc refs/tags/v2013.10-rc3 ++^46ef4faed18196472eb95216b2f74c1397ecf024 ++c99ec7332286341649cd5337eb1bbeabdff13a3a refs/tags/v2013.10-rc4 ++^0c5274e6f3231a3a28dafc1204b3f71a3534c520 ++e3fbee81eccebfd6c91609f6bc4b4aec3a017131 refs/tags/v2014.01 ++^b44bd2c73c4cfb6e3b9e7f8cf987e8e39aa74a0b ++0b3dd5f23cf6eeb9ec84da8c77d8c7d1e7d23680 refs/tags/v2014.01-rc1 ++^d19ad726bcd5d9106f7ba9c750462fcc369f1020 ++e68eecb2d896ddef422984ae6d52793099b74e9a refs/tags/v2014.01-rc2 ++^fd44194945714a478fab6407c04453caaef0bac9 ++5f60aba0d3f6b827de8dc7e0850c1050f655b572 refs/tags/v2014.01-rc3 ++^cddb6b8304bfbc34f43920051256de7fe6c4c0ab ++5b3ba909f4f881add7756d820f2eb67d3e31b112 refs/tags/v2014.04 ++^dda0dbfc69f3d560c87f5be85f127ed862ea6721 ++9574fdf82ff62a7086b257c89c01bde937a0c45e refs/tags/v2014.04-rc1 ++^0a8e823ad0c5a602c93c2e8a54caf622ade6d3fb ++4017dac218f34783977c36af8f65984a57ace7e3 refs/tags/v2014.04-rc2 ++^8ee950dd273aef6a074d41bf2ee4ef11d6f848fb ++ba34c9404626f23a41ef07bcdf3e7e5cbf133b82 refs/tags/v2014.04-rc3 ++^c494eaf409cb8db9a5a513e9bdfac20b7a83daca ++590a74953a76f2b4cc552bd85b475ea54ba02f66 refs/tags/v2014.07 ++^524123a70761110c5cf3ccc5f52f6d4da071b959 ++2db93972561773246cb7498bf1ee73e3d34fa697 refs/tags/v2014.07-rc1 ++^3e41c54ad8099951d57c3c5a0f5ebc6e8becf70c ++3472f37f1ce4d2737476b4ec7c768c04afe20046 refs/tags/v2014.07-rc2 ++^0116f40bbc269c57566d69e0db8cb9da2e194d33 ++d3b233a6a320688e22419134d6f7bb23e9c0332b refs/tags/v2014.07-rc3 ++^76b21026ceb5a6a83fc53b0ecdf425f240318022 ++9019e02a9d98f6788035ea352289a5afdbbf133d refs/tags/v2014.07-rc4 ++^a176ff0705351bf6d993a8f15e081bfa2ba2e1af ++d96885d68127e270d16484c0fbc252953a2bf2e8 refs/tags/v2014.10 ++^c43fd23cf619856b0763a64a6a3bcf3663058c49 ++49fe41ad45d09cf083db39ce4a2653d903fbe1a7 refs/tags/v2014.10-rc1 ++^e76b933e02e1b38e48754c435e9dba1c0deeb3c6 ++8d6f7381cd8f915f6599044b1848a8a6a7faff02 refs/tags/v2014.10-rc2 ++^d6c1ffc7d23f4fe4ae8c91101861055b8e1501b6 ++1f254ba729e8b21ccba3c9caf02bf358a0e8d136 refs/tags/v2014.10-rc3 ++^742de9076e8a8f44b77794b43e6175d86b897996 ++a013989f700d43f79af64fb74b05b2f333a60c7d refs/tags/v2015.01-rc1 ++^9906090f527153afddc5aa64d37cb5f89c6ee129 ++77831f3e5f83e12b4e7df418e7d43977b189031d refs/tags/v2015.01-rc2 ++^2a82ec77d27ef5f860a107c4b764643a655dceeb ++ecb091a9035a9c89a57b7fbd6cdf1db1c5ee9a80 refs/tags/v2015.01-rc3 ++^32fdf0e4d82bdca5d64d86330e461e59685f9959 ++9305547115a8073900fec5e8f3938b93c675f2c2 refs/tags/v2015.01-rc4 ++^125738e819a3b9d15210794b3dcef9f4d9bcf866 +diff -ruN u-boot-2015.01-rc3/.git/refs/heads/master u-boot/.git/refs/heads/master +--- u-boot-2015.01-rc3/.git/refs/heads/master 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/refs/heads/master 2015-01-01 17:34:31.953508170 +0100 +@@ -0,0 +1 @@ ++125738e819a3b9d15210794b3dcef9f4d9bcf866 +diff -ruN u-boot-2015.01-rc3/.git/refs/remotes/origin/HEAD u-boot/.git/refs/remotes/origin/HEAD +--- u-boot-2015.01-rc3/.git/refs/remotes/origin/HEAD 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/.git/refs/remotes/origin/HEAD 2015-01-01 17:34:31.937508433 +0100 +@@ -0,0 +1 @@ ++ref: refs/remotes/origin/master +diff -ruN u-boot-2015.01-rc3/include/common.h u-boot/include/common.h +--- u-boot-2015.01-rc3/include/common.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/common.h 2015-01-01 17:34:32.757494989 +0100 +@@ -70,12 +70,6 @@ + #ifdef CONFIG_4xx + #include + #endif +-#ifdef CONFIG_ARM +-#define asmlinkage /* nothing */ +-#endif +-#ifdef CONFIG_X86 +-#define asmlinkage __attribute__((regparm(0))) +-#endif + #ifdef CONFIG_BLACKFIN + #include + #endif +diff -ruN u-boot-2015.01-rc3/include/config_fallbacks.h u-boot/include/config_fallbacks.h +--- u-boot-2015.01-rc3/include/config_fallbacks.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/config_fallbacks.h 2015-01-01 17:34:32.757494989 +0100 +@@ -79,6 +79,10 @@ + #define CONFIG_SYS_PROMPT "=> " + #endif + ++#ifndef CONFIG_SYS_PBSIZE ++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 128) ++#endif ++ + #ifndef CONFIG_FIT_SIGNATURE + #define CONFIG_IMAGE_FORMAT_LEGACY + #endif +@@ -87,4 +91,10 @@ + #undef CONFIG_IMAGE_FORMAT_LEGACY + #endif + ++#ifdef CONFIG_DM_I2C ++# ifdef CONFIG_SYS_I2C ++# error "Cannot define CONFIG_SYS_I2C when CONFIG_DM_I2C is used" ++# endif ++#endif ++ + #endif /* __CONFIG_FALLBACKS_H */ +diff -ruN u-boot-2015.01-rc3/include/configs/alt.h u-boot/include/configs/alt.h +--- u-boot-2015.01-rc3/include/configs/alt.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/alt.h 2015-01-01 17:34:32.777494661 +0100 +@@ -95,4 +95,23 @@ + #define CONFIG_USB_EHCI_RMOBILE + #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + ++/* MMCIF */ ++#define CONFIG_MMC ++#define CONFIG_GENERIC_MMC ++#define CONFIG_CMD_MMC ++ ++#define CONFIG_SH_MMCIF ++#define CONFIG_SH_MMCIF_ADDR 0xee200000 ++#define CONFIG_SH_MMCIF_CLK 48000000 ++ ++/* Module stop status bits */ ++/* INTC-RT */ ++#define CONFIG_SMSTP0_ENA 0x00400000 ++/* MSIF */ ++#define CONFIG_SMSTP2_ENA 0x00002000 ++/* INTC-SYS, IRQC */ ++#define CONFIG_SMSTP4_ENA 0x00000180 ++/* SCIF2 */ ++#define CONFIG_SMSTP7_ENA 0x00080000 ++ + #endif /* __ALT_H */ +diff -ruN u-boot-2015.01-rc3/include/configs/apalis_t30.h u-boot/include/configs/apalis_t30.h +--- u-boot-2015.01-rc3/include/configs/apalis_t30.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/apalis_t30.h 2015-01-01 17:34:32.777494661 +0100 +@@ -26,10 +26,7 @@ + + /* I2C */ + #define CONFIG_SYS_I2C_TEGRA +-#define CONFIG_SYS_I2C_INIT_BOARD +-#define CONFIG_SYS_I2C_SPEED 100000 + #define CONFIG_CMD_I2C +-#define CONFIG_SYS_I2C + + /* SD/MMC */ + #define CONFIG_MMC +diff -ruN u-boot-2015.01-rc3/include/configs/B4860QDS.h u-boot/include/configs/B4860QDS.h +--- u-boot-2015.01-rc3/include/configs/B4860QDS.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/B4860QDS.h 2015-01-01 17:34:32.757494989 +0100 +@@ -641,6 +641,14 @@ + #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE + #endif + #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE ++#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ ++ CONFIG_SYS_BMAN_CENA_SIZE) ++#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 + #define CONFIG_SYS_QMAN_NUM_PORTALS 25 + #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 + #ifdef CONFIG_PHYS_64BIT +@@ -649,6 +657,14 @@ + #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE + #endif + #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE ++#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ ++ CONFIG_SYS_QMAN_CENA_SIZE) ++#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + + #define CONFIG_SYS_DPAA_FMAN + +diff -ruN u-boot-2015.01-rc3/include/configs/beaver.h u-boot/include/configs/beaver.h +--- u-boot-2015.01-rc3/include/configs/beaver.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/beaver.h 2015-01-01 17:34:32.781494596 +0100 +@@ -40,10 +40,7 @@ + + /* I2C */ + #define CONFIG_SYS_I2C_TEGRA +-#define CONFIG_SYS_I2C_INIT_BOARD +-#define CONFIG_SYS_I2C_SPEED 100000 + #define CONFIG_CMD_I2C +-#define CONFIG_SYS_I2C + + /* SD/MMC */ + #define CONFIG_MMC +diff -ruN u-boot-2015.01-rc3/include/configs/BSC9131RDB.h u-boot/include/configs/BSC9131RDB.h +--- u-boot-2015.01-rc3/include/configs/BSC9131RDB.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/BSC9131RDB.h 2015-01-01 17:34:32.757494989 +0100 +@@ -11,6 +11,9 @@ + #ifndef __CONFIG_H + #define __CONFIG_H + ++#define CONFIG_SYS_GENERIC_BOARD ++#define CONFIG_DISPLAY_BOARDINFO ++ + #ifdef CONFIG_BSC9131RDB + #define CONFIG_BSC9131 + #define CONFIG_NAND_FSL_IFC +diff -ruN u-boot-2015.01-rc3/include/configs/BSC9132QDS.h u-boot/include/configs/BSC9132QDS.h +--- u-boot-2015.01-rc3/include/configs/BSC9132QDS.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/BSC9132QDS.h 2015-01-01 17:34:32.761494923 +0100 +@@ -11,6 +11,9 @@ + #ifndef __CONFIG_H + #define __CONFIG_H + ++#define CONFIG_SYS_GENERIC_BOARD ++#define CONFIG_DISPLAY_BOARDINFO ++ + #ifdef CONFIG_BSC9132QDS + #define CONFIG_BSC9132 + #endif +diff -ruN u-boot-2015.01-rc3/include/configs/cardhu.h u-boot/include/configs/cardhu.h +--- u-boot-2015.01-rc3/include/configs/cardhu.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/cardhu.h 2015-01-01 17:34:32.785494529 +0100 +@@ -43,12 +43,7 @@ + + /* I2C */ + #define CONFIG_SYS_I2C_TEGRA +-#define CONFIG_SYS_I2C_INIT_BOARD +-#define CONFIG_I2C_MULTI_BUS +-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS +-#define CONFIG_SYS_I2C_SPEED 100000 + #define CONFIG_CMD_I2C +-#define CONFIG_SYS_I2C + + /* SD/MMC */ + #define CONFIG_MMC +diff -ruN u-boot-2015.01-rc3/include/configs/chromebook_link.h u-boot/include/configs/chromebook_link.h +--- u-boot-2015.01-rc3/include/configs/chromebook_link.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/chromebook_link.h 2015-01-01 17:34:32.785494529 +0100 +@@ -25,10 +25,10 @@ + + #define CONFIG_X86_RESET_VECTOR + #define CONFIG_NR_DRAM_BANKS 8 +-#define CONFIG_X86_MRC_START 0xfffa0000 ++#define CONFIG_X86_MRC_ADDR 0xfffa0000 + #define CONFIG_CACHE_MRC_SIZE_KB 512 + +-#define CONFIG_COREBOOT_SERIAL ++#define CONFIG_X86_SERIAL + + #define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_NM10_AHCI}, \ +@@ -39,7 +39,7 @@ + {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE} + +-#define CONFIG_X86_OPTION_ROM_FILENAME pci8086,0166.bin ++#define CONFIG_X86_OPTION_ROM_FILE pci8086,0166.bin + #define CONFIG_X86_OPTION_ROM_ADDR 0xfff90000 + #define CONFIG_VIDEO_X86 + +diff -ruN u-boot-2015.01-rc3/include/configs/colibri_t30.h u-boot/include/configs/colibri_t30.h +--- u-boot-2015.01-rc3/include/configs/colibri_t30.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/colibri_t30.h 2015-01-01 17:34:32.785494529 +0100 +@@ -25,10 +25,7 @@ + + /* I2C */ + #define CONFIG_SYS_I2C_TEGRA +-#define CONFIG_SYS_I2C_INIT_BOARD +-#define CONFIG_SYS_I2C_SPEED 100000 + #define CONFIG_CMD_I2C +-#define CONFIG_SYS_I2C + + /* SD/MMC */ + #define CONFIG_MMC +diff -ruN u-boot-2015.01-rc3/include/configs/coreboot.h u-boot/include/configs/coreboot.h +--- u-boot-2015.01-rc3/include/configs/coreboot.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/coreboot.h 2015-01-01 17:34:32.785494529 +0100 +@@ -49,7 +49,7 @@ + {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE} + +-#define CONFIG_COREBOOT_SERIAL ++#define CONFIG_X86_SERIAL + + #define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \ + "stdout=vga,serial,cbmem\0" \ +diff -ruN u-boot-2015.01-rc3/include/configs/corenet_ds.h u-boot/include/configs/corenet_ds.h +--- u-boot-2015.01-rc3/include/configs/corenet_ds.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/corenet_ds.h 2015-01-01 17:34:32.785494529 +0100 +@@ -495,6 +495,14 @@ + #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE + #endif + #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 ++#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE ++#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ ++ CONFIG_SYS_BMAN_CENA_SIZE) ++#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 + #define CONFIG_SYS_QMAN_NUM_PORTALS 10 + #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 + #ifdef CONFIG_PHYS_64BIT +@@ -503,6 +511,14 @@ + #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE + #endif + #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 ++#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE ++#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ ++ CONFIG_SYS_QMAN_CENA_SIZE) ++#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + + #define CONFIG_SYS_DPAA_FMAN + #define CONFIG_SYS_DPAA_PME +diff -ruN u-boot-2015.01-rc3/include/configs/crownbay.h u-boot/include/configs/crownbay.h +--- u-boot-2015.01-rc3/include/configs/crownbay.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/include/configs/crownbay.h 2015-01-01 17:34:32.785494529 +0100 +@@ -0,0 +1,61 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++/* ++ * board/config.h - configuration options, board specific ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#include ++ ++#define CONFIG_SYS_MONITOR_LEN (1 << 20) ++#define CONFIG_SYS_X86_START16 0xfffff800 ++#define CONFIG_BOARD_EARLY_INIT_F ++ ++#define CONFIG_X86_RESET_VECTOR ++#define CONFIG_NR_DRAM_BANKS 1 ++ ++#define CONFIG_X86_SERIAL ++#define CONFIG_SMSC_LPC47M ++ ++#define CONFIG_PCI_MEM_BUS 0x40000000 ++#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS ++#define CONFIG_PCI_MEM_SIZE 0x80000000 ++ ++#define CONFIG_PCI_PREF_BUS 0xc0000000 ++#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS ++#define CONFIG_PCI_PREF_SIZE 0x20000000 ++ ++#define CONFIG_PCI_IO_BUS 0x2000 ++#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS ++#define CONFIG_PCI_IO_SIZE 0xe000 ++ ++#define CONFIG_SYS_EARLY_PCI_INIT ++#define CONFIG_PCI_PNP ++#define CONFIG_E1000 ++ ++#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ ++ "stdout=serial\0" \ ++ "stderr=serial\0" ++ ++#define CONFIG_SCSI_DEV_LIST \ ++ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA} ++ ++#define CONFIG_SPI_FLASH_SST ++ ++#define CONFIG_MMC ++#define CONFIG_SDHCI ++#define CONFIG_GENERIC_MMC ++#define CONFIG_MMC_SDMA ++#define CONFIG_CMD_MMC ++ ++/* Video is not supported */ ++#undef CONFIG_VIDEO ++#undef CONFIG_CFB_CONSOLE ++ ++#endif /* __CONFIG_H */ +diff -ruN u-boot-2015.01-rc3/include/configs/dalmore.h u-boot/include/configs/dalmore.h +--- u-boot-2015.01-rc3/include/configs/dalmore.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/dalmore.h 2015-01-01 17:34:32.789494465 +0100 +@@ -36,12 +36,7 @@ + + /* I2C */ + #define CONFIG_SYS_I2C_TEGRA +-#define CONFIG_SYS_I2C_INIT_BOARD +-#define CONFIG_I2C_MULTI_BUS +-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS +-#define CONFIG_SYS_I2C_SPEED 100000 + #define CONFIG_CMD_I2C +-#define CONFIG_SYS_I2C + + /* SD/MMC */ + #define CONFIG_MMC +diff -ruN u-boot-2015.01-rc3/include/configs/gose.h u-boot/include/configs/gose.h +--- u-boot-2015.01-rc3/include/configs/gose.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/gose.h 2015-01-01 17:34:32.793494399 +0100 +@@ -91,4 +91,14 @@ + #define CONFIG_USB_EHCI_RMOBILE + #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + ++/* Module stop status bits */ ++/* INTC-RT */ ++#define CONFIG_SMSTP0_ENA 0x00400000 ++/* MSIF */ ++#define CONFIG_SMSTP2_ENA 0x00002000 ++/* INTC-SYS, IRQC */ ++#define CONFIG_SMSTP4_ENA 0x00000180 ++/* SCIF0 */ ++#define CONFIG_SMSTP7_ENA 0x00200000 ++ + #endif /* __GOSE_H */ +diff -ruN u-boot-2015.01-rc3/include/configs/jetson-tk1.h u-boot/include/configs/jetson-tk1.h +--- u-boot-2015.01-rc3/include/configs/jetson-tk1.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/jetson-tk1.h 2015-01-01 17:34:32.797494333 +0100 +@@ -25,12 +25,7 @@ + + /* I2C */ + #define CONFIG_SYS_I2C_TEGRA +-#define CONFIG_SYS_I2C_INIT_BOARD +-#define CONFIG_I2C_MULTI_BUS +-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS +-#define CONFIG_SYS_I2C_SPEED 100000 + #define CONFIG_CMD_I2C +-#define CONFIG_SYS_I2C + + /* SD/MMC */ + #define CONFIG_MMC +diff -ruN u-boot-2015.01-rc3/include/configs/km/kmp204x-common.h u-boot/include/configs/km/kmp204x-common.h +--- u-boot-2015.01-rc3/include/configs/km/kmp204x-common.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/km/kmp204x-common.h 2015-01-01 17:34:32.797494333 +0100 +@@ -339,10 +339,26 @@ + #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 + #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull + #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 ++#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE ++#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ ++ CONFIG_SYS_BMAN_CENA_SIZE) ++#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 + #define CONFIG_SYS_QMAN_NUM_PORTALS 10 + #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 + #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull + #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 ++#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE ++#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ ++ CONFIG_SYS_QMAN_CENA_SIZE) ++#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + + #define CONFIG_SYS_DPAA_FMAN + #define CONFIG_SYS_DPAA_PME +diff -ruN u-boot-2015.01-rc3/include/configs/koelsch.h u-boot/include/configs/koelsch.h +--- u-boot-2015.01-rc3/include/configs/koelsch.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/koelsch.h 2015-01-01 17:34:32.797494333 +0100 +@@ -92,4 +92,15 @@ + #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + #define CONFIG_USB_STORAGE + ++ ++/* Module stop status bits */ ++/* INTC-RT */ ++#define CONFIG_SMSTP0_ENA 0x00400000 ++/* MSIF*/ ++#define CONFIG_SMSTP2_ENA 0x00002000 ++/* INTC-SYS, IRQC */ ++#define CONFIG_SMSTP4_ENA 0x00000180 ++/* SCIF0 */ ++#define CONFIG_SMSTP7_ENA 0x00200000 ++ + #endif /* __KOELSCH_H */ +diff -ruN u-boot-2015.01-rc3/include/configs/lager.h u-boot/include/configs/lager.h +--- u-boot-2015.01-rc3/include/configs/lager.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/lager.h 2015-01-01 17:34:32.797494333 +0100 +@@ -93,4 +93,23 @@ + #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 + #define CONFIG_USB_STORAGE + ++/* MMC */ ++#define CONFIG_MMC ++#define CONFIG_CMD_MMC ++#define CONFIG_GENERIC_MMC ++ ++#define CONFIG_SH_MMCIF ++#define CONFIG_SH_MMCIF_ADDR 0xEE220000 ++#define CONFIG_SH_MMCIF_CLK 97500000 ++ ++/* Module stop status bits */ ++/* INTC-RT */ ++#define CONFIG_SMSTP0_ENA 0x00400000 ++/* MSIF */ ++#define CONFIG_SMSTP2_ENA 0x00002000 ++/* INTC-SYS, IRQC */ ++#define CONFIG_SMSTP4_ENA 0x00000180 ++/* SCIF0 */ ++#define CONFIG_SMSTP7_ENA 0x00200000 ++ + #endif /* __LAGER_H */ +diff -ruN u-boot-2015.01-rc3/include/configs/ls1021aqds.h u-boot/include/configs/ls1021aqds.h +--- u-boot-2015.01-rc3/include/configs/ls1021aqds.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/ls1021aqds.h 2015-01-01 17:34:32.797494333 +0100 +@@ -37,8 +37,85 @@ + unsigned long get_board_ddr_clk(void); + #endif + ++#ifdef CONFIG_QSPI_BOOT ++#define CONFIG_SYS_CLK_FREQ 100000000 ++#define CONFIG_DDR_CLK_FREQ 100000000 ++#define CONFIG_QIXIS_I2C_ACCESS ++#else + #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() + #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() ++#endif ++ ++#ifdef CONFIG_RAMBOOT_PBL ++#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021aqds/ls102xa_pbi.cfg ++#endif ++ ++#ifdef CONFIG_SD_BOOT ++#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg ++#define CONFIG_SPL_FRAMEWORK ++#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" ++#define CONFIG_SPL_LIBCOMMON_SUPPORT ++#define CONFIG_SPL_LIBGENERIC_SUPPORT ++#define CONFIG_SPL_ENV_SUPPORT ++#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT ++#define CONFIG_SPL_I2C_SUPPORT ++#define CONFIG_SPL_WATCHDOG_SUPPORT ++#define CONFIG_SPL_SERIAL_SUPPORT ++#define CONFIG_SPL_DRIVERS_MISC_SUPPORT ++#define CONFIG_SPL_MMC_SUPPORT ++#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 ++#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 ++ ++#define CONFIG_SPL_TEXT_BASE 0x10000000 ++#define CONFIG_SPL_MAX_SIZE 0x1a000 ++#define CONFIG_SPL_STACK 0x1001d000 ++#define CONFIG_SPL_PAD_TO 0x1c000 ++#define CONFIG_SYS_TEXT_BASE 0x82000000 ++ ++#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 ++#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 ++#define CONFIG_SPL_BSS_START_ADDR 0x80100000 ++#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 ++#define CONFIG_SYS_MONITOR_LEN 0x80000 ++#endif ++ ++#ifdef CONFIG_QSPI_BOOT ++#define CONFIG_SYS_TEXT_BASE 0x40010000 ++#define CONFIG_SYS_NO_FLASH ++#endif ++ ++#ifdef CONFIG_NAND_BOOT ++#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg ++#define CONFIG_SPL_FRAMEWORK ++#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" ++#define CONFIG_SPL_LIBCOMMON_SUPPORT ++#define CONFIG_SPL_LIBGENERIC_SUPPORT ++#define CONFIG_SPL_ENV_SUPPORT ++#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT ++#define CONFIG_SPL_I2C_SUPPORT ++#define CONFIG_SPL_WATCHDOG_SUPPORT ++#define CONFIG_SPL_SERIAL_SUPPORT ++#define CONFIG_SPL_NAND_SUPPORT ++#define CONFIG_SPL_DRIVERS_MISC_SUPPORT ++ ++#define CONFIG_SPL_TEXT_BASE 0x10000000 ++#define CONFIG_SPL_MAX_SIZE 0x1a000 ++#define CONFIG_SPL_STACK 0x1001d000 ++#define CONFIG_SPL_PAD_TO 0x1c000 ++#define CONFIG_SYS_TEXT_BASE 0x82000000 ++ ++#define CONFIG_SYS_NAND_U_BOOT_SIZE (400 << 10) ++#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO ++#define CONFIG_SYS_NAND_PAGE_SIZE 2048 ++#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE ++#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE ++ ++#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 ++#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 ++#define CONFIG_SPL_BSS_START_ADDR 0x80100000 ++#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 ++#define CONFIG_SYS_MONITOR_LEN 0x80000 ++#endif + + #ifndef CONFIG_SYS_TEXT_BASE + #define CONFIG_SYS_TEXT_BASE 0x67f80000 +@@ -71,13 +148,15 @@ + + #define CONFIG_FSL_CAAM /* Enable CAAM */ + +-#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI) ++#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \ ++ !defined(CONFIG_QSPI_BOOT) + #define CONFIG_U_QE + #endif + + /* + * IFC Definitions + */ ++#ifndef CONFIG_QSPI_BOOT + #define CONFIG_FSL_IFC + #define CONFIG_SYS_FLASH_BASE 0x60000000 + #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +@@ -170,6 +249,7 @@ + #define CONFIG_CMD_NAND + + #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) ++#endif + + /* + * QIXIS Definitions +@@ -214,6 +294,40 @@ + #define CONFIG_SYS_FPGA_FTIM3 0x0 + #endif + ++#if defined(CONFIG_NAND_BOOT) ++#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT ++#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR ++#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK ++#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR ++#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 ++#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 ++#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 ++#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 ++#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT ++#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR ++#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK ++#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR ++#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 ++#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 ++#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 ++#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 ++#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT ++#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR ++#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK ++#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR ++#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 ++#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 ++#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 ++#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 ++#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT ++#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR ++#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK ++#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR ++#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 ++#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 ++#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 ++#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 ++#else + #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT + #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR + #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +@@ -246,6 +360,7 @@ + #define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 + #define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 + #define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 ++#endif + + /* + * Serial Port +@@ -279,6 +394,21 @@ + #define CONFIG_FSL_ESDHC + #define CONFIG_GENERIC_MMC + ++#define CONFIG_CMD_FAT ++#define CONFIG_DOS_PARTITION ++ ++/* QSPI */ ++#ifdef CONFIG_QSPI_BOOT ++#define CONFIG_FSL_QSPI ++#define QSPI0_AMBA_BASE 0x40000000 ++#define FSL_QSPI_FLASH_SIZE (1 << 24) ++#define FSL_QSPI_FLASH_NUM 2 ++ ++#define CONFIG_CMD_SF ++#define CONFIG_SPI_FLASH ++#define CONFIG_SPI_FLASH_SPANSION ++#endif ++ + /* + * USB + */ +@@ -341,6 +471,14 @@ + #endif + + #endif ++ ++/* PCIe */ ++#define CONFIG_PCI /* Enable PCI/PCIE */ ++#define CONFIG_PCIE1 /* PCIE controler 1 */ ++#define CONFIG_PCIE2 /* PCIE controler 2 */ ++#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ ++#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" ++ + #define CONFIG_CMD_PING + #define CONFIG_CMD_DHCP + #define CONFIG_CMD_MII +@@ -348,7 +486,20 @@ + + #define CONFIG_CMDLINE_TAG + #define CONFIG_CMDLINE_EDITING ++ ++#ifdef CONFIG_QSPI_BOOT ++#undef CONFIG_CMD_IMLS ++#else + #define CONFIG_CMD_IMLS ++#endif ++ ++#define CONFIG_ARMV7_NONSEC ++#define CONFIG_ARMV7_VIRT ++#define CONFIG_PEN_ADDR_BIG_ENDIAN ++#define CONFIG_LS102XA_NS_ACCESS ++#define CONFIG_SMP_PEN_ADDR 0x01ee0200 ++#define CONFIG_TIMER_CLK_FREQ 12500000 ++#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR + + #define CONFIG_HWCONFIG + #define HWCONFIG_BUFFER_SIZE 128 +@@ -385,6 +536,8 @@ + + #define CONFIG_SYS_LOAD_ADDR 0x82000000 + ++#define CONFIG_LS102XA_STREAM_ID ++ + /* + * Stack sizes + * The stack sizes are set up in start.S using the settings below +@@ -396,17 +549,37 @@ + #define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + ++#ifdef CONFIG_SPL_BUILD ++#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE ++#else + #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ ++#endif + + /* + * Environment + */ + #define CONFIG_ENV_OVERWRITE + ++#if defined(CONFIG_SD_BOOT) ++#define CONFIG_ENV_OFFSET 0x100000 ++#define CONFIG_ENV_IS_IN_MMC ++#define CONFIG_SYS_MMC_ENV_DEV 0 ++#define CONFIG_ENV_SIZE 0x2000 ++#elif defined(CONFIG_QSPI_BOOT) ++#define CONFIG_ENV_IS_IN_SPI_FLASH ++#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ ++#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ ++#define CONFIG_ENV_SECT_SIZE 0x10000 ++#elif defined(CONFIG_NAND_BOOT) ++#define CONFIG_ENV_IS_IN_NAND ++#define CONFIG_ENV_SIZE 0x2000 ++#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) ++#else + #define CONFIG_ENV_IS_IN_FLASH + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) + #define CONFIG_ENV_SIZE 0x2000 + #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ ++#endif + + #define CONFIG_OF_LIBFDT + #define CONFIG_OF_BOARD_SETUP +diff -ruN u-boot-2015.01-rc3/include/configs/ls1021atwr.h u-boot/include/configs/ls1021atwr.h +--- u-boot-2015.01-rc3/include/configs/ls1021atwr.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/ls1021atwr.h 2015-01-01 17:34:32.797494333 +0100 +@@ -35,6 +35,43 @@ + #define CONFIG_SYS_CLK_FREQ 100000000 + #define CONFIG_DDR_CLK_FREQ 100000000 + ++#ifdef CONFIG_RAMBOOT_PBL ++#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg ++#endif ++ ++#ifdef CONFIG_SD_BOOT ++#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg ++#define CONFIG_SPL_FRAMEWORK ++#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" ++#define CONFIG_SPL_LIBCOMMON_SUPPORT ++#define CONFIG_SPL_LIBGENERIC_SUPPORT ++#define CONFIG_SPL_ENV_SUPPORT ++#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT ++#define CONFIG_SPL_I2C_SUPPORT ++#define CONFIG_SPL_WATCHDOG_SUPPORT ++#define CONFIG_SPL_SERIAL_SUPPORT ++#define CONFIG_SPL_MMC_SUPPORT ++#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 ++#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 ++ ++#define CONFIG_SPL_TEXT_BASE 0x10000000 ++#define CONFIG_SPL_MAX_SIZE 0x1a000 ++#define CONFIG_SPL_STACK 0x1001d000 ++#define CONFIG_SPL_PAD_TO 0x1c000 ++#define CONFIG_SYS_TEXT_BASE 0x82000000 ++ ++#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 ++#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 ++#define CONFIG_SPL_BSS_START_ADDR 0x80100000 ++#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 ++#define CONFIG_SYS_MONITOR_LEN 0x80000 ++#endif ++ ++#ifdef CONFIG_QSPI_BOOT ++#define CONFIG_SYS_TEXT_BASE 0x40010000 ++#define CONFIG_SYS_NO_FLASH ++#endif ++ + #ifndef CONFIG_SYS_TEXT_BASE + #define CONFIG_SYS_TEXT_BASE 0x67f80000 + #endif +@@ -50,13 +87,15 @@ + + #define CONFIG_FSL_CAAM /* Enable CAAM */ + +-#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI) ++#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \ ++ !defined(CONFIG_QSPI_BOOT) + #define CONFIG_U_QE + #endif + + /* + * IFC Definitions + */ ++#ifndef CONFIG_QSPI_BOOT + #define CONFIG_FSL_IFC + #define CONFIG_SYS_FLASH_BASE 0x60000000 + #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +@@ -100,6 +139,7 @@ + + #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS + #define CONFIG_SYS_WRITE_SWAPPED_DATA ++#endif + + /* CPLD */ + +@@ -180,6 +220,21 @@ + #define CONFIG_FSL_ESDHC + #define CONFIG_GENERIC_MMC + ++#define CONFIG_CMD_FAT ++#define CONFIG_DOS_PARTITION ++ ++/* QSPI */ ++#ifdef CONFIG_QSPI_BOOT ++#define CONFIG_FSL_QSPI ++#define QSPI0_AMBA_BASE 0x40000000 ++#define FSL_QSPI_FLASH_SIZE (1 << 24) ++#define FSL_QSPI_FLASH_NUM 2 ++ ++#define CONFIG_CMD_SF ++#define CONFIG_SPI_FLASH ++#define CONFIG_SPI_FLASH_STMICRO ++#endif ++ + /* + * Video + */ +@@ -236,6 +291,13 @@ + #define CONFIG_HAS_ETH2 + #endif + ++/* PCIe */ ++#define CONFIG_PCI /* Enable PCI/PCIE */ ++#define CONFIG_PCIE1 /* PCIE controler 1 */ ++#define CONFIG_PCIE2 /* PCIE controler 2 */ ++#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ ++#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" ++ + #define CONFIG_CMD_PING + #define CONFIG_CMD_DHCP + #define CONFIG_CMD_MII +@@ -243,7 +305,20 @@ + + #define CONFIG_CMDLINE_TAG + #define CONFIG_CMDLINE_EDITING ++ ++#ifdef CONFIG_QSPI_BOOT ++#undef CONFIG_CMD_IMLS ++#else + #define CONFIG_CMD_IMLS ++#endif ++ ++#define CONFIG_ARMV7_NONSEC ++#define CONFIG_ARMV7_VIRT ++#define CONFIG_PEN_ADDR_BIG_ENDIAN ++#define CONFIG_LS102XA_NS_ACCESS ++#define CONFIG_SMP_PEN_ADDR 0x01ee0200 ++#define CONFIG_TIMER_CLK_FREQ 12500000 ++#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR + + #define CONFIG_HWCONFIG + #define HWCONFIG_BUFFER_SIZE 128 +@@ -277,6 +352,8 @@ + + #define CONFIG_SYS_LOAD_ADDR 0x82000000 + ++#define CONFIG_LS102XA_STREAM_ID ++ + /* + * Stack sizes + * The stack sizes are set up in start.S using the settings below +@@ -288,7 +365,11 @@ + #define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + ++#ifdef CONFIG_SPL_BUILD ++#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE ++#else + #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ ++#endif + + #define CONFIG_SYS_QE_FW_ADDR 0x67f40000 + +@@ -297,10 +378,22 @@ + */ + #define CONFIG_ENV_OVERWRITE + ++#if defined(CONFIG_SD_BOOT) ++#define CONFIG_ENV_OFFSET 0x100000 ++#define CONFIG_ENV_IS_IN_MMC ++#define CONFIG_SYS_MMC_ENV_DEV 0 ++#define CONFIG_ENV_SIZE 0x20000 ++#elif defined(CONFIG_QSPI_BOOT) ++#define CONFIG_ENV_IS_IN_SPI_FLASH ++#define CONFIG_ENV_SIZE 0x2000 ++#define CONFIG_ENV_OFFSET 0x100000 ++#define CONFIG_ENV_SECT_SIZE 0x10000 ++#else + #define CONFIG_ENV_IS_IN_FLASH + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) + #define CONFIG_ENV_SIZE 0x20000 + #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ ++#endif + + #define CONFIG_OF_LIBFDT + #define CONFIG_OF_BOARD_SETUP +diff -ruN u-boot-2015.01-rc3/include/configs/mx53loco.h u-boot/include/configs/mx53loco.h +--- u-boot-2015.01-rc3/include/configs/mx53loco.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/mx53loco.h 2015-01-01 17:34:32.801494268 +0100 +@@ -94,6 +94,7 @@ + /* Command definition */ + #include + #define CONFIG_CMD_BOOTZ ++#define CONFIG_SUPPORT_RAW_INITRD + + #undef CONFIG_CMD_IMLS + +diff -ruN u-boot-2015.01-rc3/include/configs/mx6sabre_common.h u-boot/include/configs/mx6sabre_common.h +--- u-boot-2015.01-rc3/include/configs/mx6sabre_common.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/mx6sabre_common.h 2015-01-01 17:34:32.801494268 +0100 +@@ -220,9 +220,6 @@ + #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + #define CONFIG_AUTO_COMPLETE + #define CONFIG_SYS_CBSIZE 256 +- +-/* Print Buffer Size */ +-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + #define CONFIG_SYS_MAXARGS 16 + #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +diff -ruN u-boot-2015.01-rc3/include/configs/mx6slevk.h u-boot/include/configs/mx6slevk.h +--- u-boot-2015.01-rc3/include/configs/mx6slevk.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/mx6slevk.h 2015-01-01 17:34:32.805494202 +0100 +@@ -209,6 +209,20 @@ + #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 + #endif + ++/* USB Configs */ ++#define CONFIG_CMD_USB ++#ifdef CONFIG_CMD_USB ++#define CONFIG_USB_EHCI ++#define CONFIG_USB_EHCI_MX6 ++#define CONFIG_USB_STORAGE ++#define CONFIG_EHCI_HCD_INIT_AFTER_RESET ++#define CONFIG_USB_HOST_ETHER ++#define CONFIG_USB_ETHER_ASIX ++#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) ++#define CONFIG_MXC_USB_FLAGS 0 ++#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 ++#endif ++ + #define CONFIG_SYS_FSL_USDHC_NUM 3 + #if defined(CONFIG_ENV_IS_IN_MMC) + #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC2*/ +diff -ruN u-boot-2015.01-rc3/include/configs/mx6sxsabresd.h u-boot/include/configs/mx6sxsabresd.h +--- u-boot-2015.01-rc3/include/configs/mx6sxsabresd.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/mx6sxsabresd.h 2015-01-01 17:34:32.805494202 +0100 +@@ -198,6 +198,20 @@ + #define CONFIG_PHYLIB + #define CONFIG_PHY_ATHEROS + ++ ++#define CONFIG_CMD_USB ++#ifdef CONFIG_CMD_USB ++#define CONFIG_USB_EHCI ++#define CONFIG_USB_EHCI_MX6 ++#define CONFIG_USB_STORAGE ++#define CONFIG_EHCI_HCD_INIT_AFTER_RESET ++#define CONFIG_USB_HOST_ETHER ++#define CONFIG_USB_ETHER_ASIX ++#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) ++#define CONFIG_MXC_USB_FLAGS 0 ++#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 ++#endif ++ + #define CONFIG_CMD_PCI + #ifdef CONFIG_CMD_PCI + #define CONFIG_PCI +@@ -208,6 +222,16 @@ + #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1) + #endif + ++#define CONFIG_DM ++#define CONFIG_DM_THERMAL ++#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) ++#define CONFIG_IMX6_THERMAL ++ ++#define CONFIG_CMD_FUSE ++#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) ++#define CONFIG_MXC_OCOTP ++#endif ++ + /* FLASH and environment organization */ + #define CONFIG_SYS_NO_FLASH + +diff -ruN u-boot-2015.01-rc3/include/configs/nyan-big.h u-boot/include/configs/nyan-big.h +--- u-boot-2015.01-rc3/include/configs/nyan-big.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/include/configs/nyan-big.h 2015-01-01 17:34:32.805494202 +0100 +@@ -0,0 +1,74 @@ ++/* ++ * (C) Copyright 2014 ++ * NVIDIA Corporation ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#include ++ ++#include "tegra124-common.h" ++ ++/* High-level configuration options */ ++#define V_PROMPT "Tegra124 (Nyan-big) # " ++#define CONFIG_TEGRA_BOARD_STRING "Google/NVIDIA Nyan-big" ++ ++/* Board-specific serial config */ ++#define CONFIG_SERIAL_MULTI ++#define CONFIG_TEGRA_ENABLE_UARTA ++#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE ++ ++#define CONFIG_BOARD_EARLY_INIT_F ++ ++/* I2C */ ++#define CONFIG_SYS_I2C_TEGRA ++#define CONFIG_CMD_I2C ++ ++/* SD/MMC */ ++#define CONFIG_MMC ++#define CONFIG_GENERIC_MMC ++#define CONFIG_TEGRA_MMC ++#define CONFIG_CMD_MMC ++ ++/* Environment in eMMC, at the end of 2nd "boot sector" */ ++#define CONFIG_ENV_IS_IN_MMC ++#define CONFIG_SYS_MMC_ENV_DEV 0 ++#define CONFIG_SYS_MMC_ENV_PART 2 ++#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) ++ ++/* SPI */ ++#define CONFIG_TEGRA114_SPI /* Compatible w/ Tegra114 SPI */ ++#define CONFIG_TEGRA114_SPI_CTRLS 6 ++#define CONFIG_SPI_FLASH ++#define CONFIG_SPI_FLASH_WINBOND ++#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 ++#define CONFIG_SF_DEFAULT_SPEED 24000000 ++#define CONFIG_CMD_SPI ++#define CONFIG_CMD_SF ++#define CONFIG_SPI_FLASH_SIZE (4 << 20) ++ ++/* USB Host support */ ++#define CONFIG_USB_EHCI ++#define CONFIG_USB_EHCI_TEGRA ++#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 ++#define CONFIG_USB_STORAGE ++#define CONFIG_CMD_USB ++ ++/* USB networking support */ ++#define CONFIG_USB_HOST_ETHER ++#define CONFIG_USB_ETHER_ASIX ++ ++/* General networking support */ ++#define CONFIG_CMD_NET ++#define CONFIG_CMD_DHCP ++ ++#define CONFIG_FIT ++#define CONFIG_OF_LIBFDT ++ ++#include "tegra-common-usb-gadget.h" ++#include "tegra-common-post.h" ++ ++#endif /* __CONFIG_H */ +diff -ruN u-boot-2015.01-rc3/include/configs/P1023RDB.h u-boot/include/configs/P1023RDB.h +--- u-boot-2015.01-rc3/include/configs/P1023RDB.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/P1023RDB.h 2015-01-01 17:34:32.769494793 +0100 +@@ -347,9 +347,25 @@ + #define CONFIG_SYS_QMAN_MEM_BASE 0xff000000 + #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE + #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 ++#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE ++#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ ++ CONFIG_SYS_QMAN_CENA_SIZE) ++#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + #define CONFIG_SYS_BMAN_MEM_BASE 0xff200000 + #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE + #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 ++#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE ++#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ ++ CONFIG_SYS_BMAN_CENA_SIZE) ++#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 + + /* For FM */ + #define CONFIG_SYS_DPAA_FMAN +diff -ruN u-boot-2015.01-rc3/include/configs/P2041RDB.h u-boot/include/configs/P2041RDB.h +--- u-boot-2015.01-rc3/include/configs/P2041RDB.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/P2041RDB.h 2015-01-01 17:34:32.769494793 +0100 +@@ -13,6 +13,8 @@ + + #define CONFIG_P2041RDB + #define CONFIG_PHYS_64BIT ++#define CONFIG_SYS_GENERIC_BOARD ++#define CONFIG_DISPLAY_BOARDINFO + #define CONFIG_PPC_P2041 + + #ifdef CONFIG_RAMBOOT_PBL +@@ -489,6 +491,14 @@ + #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE + #endif + #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 ++#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE ++#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ ++ CONFIG_SYS_BMAN_CENA_SIZE) ++#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 + #define CONFIG_SYS_QMAN_NUM_PORTALS 10 + #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 + #ifdef CONFIG_PHYS_64BIT +@@ -497,6 +507,14 @@ + #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE + #endif + #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 ++#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE ++#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ ++ CONFIG_SYS_QMAN_CENA_SIZE) ++#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + + #define CONFIG_SYS_DPAA_FMAN + #define CONFIG_SYS_DPAA_PME +diff -ruN u-boot-2015.01-rc3/include/configs/rcar-gen2-common.h u-boot/include/configs/rcar-gen2-common.h +--- u-boot-2015.01-rc3/include/configs/rcar-gen2-common.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/rcar-gen2-common.h 2015-01-01 17:34:32.809494137 +0100 +@@ -28,6 +28,9 @@ + #define CONFIG_CMD_FAT + #define CONFIG_CMD_SF + #define CONFIG_CMD_SPI ++#define CONFIG_CMD_EXT2 ++#define CONFIG_CMD_EXT4 ++#define CONFIG_CMD_EXT4_WRITE + + #define CONFIG_SYS_THUMB_BUILD + #define CONFIG_SYS_GENERIC_BOARD +@@ -36,6 +39,7 @@ + #define CONFIG_FAT_WRITE + #define CONFIG_DOS_PARTITION + #define CONFIG_SUPPORT_VFAT ++#define CONFIG_FS_EXT4 + #define CONFIG_EXT4_WRITE + + #define CONFIG_CMDLINE_TAG +diff -ruN u-boot-2015.01-rc3/include/configs/rpi.h u-boot/include/configs/rpi.h +--- u-boot-2015.01-rc3/include/configs/rpi.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/rpi.h 2015-01-01 17:34:32.809494137 +0100 +@@ -34,6 +34,7 @@ + #define CONFIG_DM + #define CONFIG_CMD_DM + #define CONFIG_DM_GPIO ++#define CONFIG_DM_SERIAL + + /* Memory layout */ + #define CONFIG_NR_DRAM_BANKS 1 +@@ -51,6 +52,7 @@ + CONFIG_SYS_SDRAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + #define CONFIG_SYS_MALLOC_LEN SZ_4M ++#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) + #define CONFIG_SYS_MEMTEST_START 0x00100000 + #define CONFIG_SYS_MEMTEST_END 0x00200000 + #define CONFIG_LOADADDR 0x00200000 +@@ -92,9 +94,7 @@ + #endif + + /* Console UART */ +-#define CONFIG_PL011_SERIAL +-#define CONFIG_PL011_CLOCK 3000000 +-#define CONFIG_PL01x_PORTS { (void *)0x20201000 } ++#define CONFIG_PL01X_SERIAL + #define CONFIG_CONS_INDEX 0 + #define CONFIG_BAUDRATE 115200 + +diff -ruN u-boot-2015.01-rc3/include/configs/sandbox.h u-boot/include/configs/sandbox.h +--- u-boot-2015.01-rc3/include/configs/sandbox.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/sandbox.h 2015-01-01 17:34:32.809494137 +0100 +@@ -112,6 +112,12 @@ + #define CONFIG_SPI_FLASH_STMICRO + #define CONFIG_SPI_FLASH_WINBOND + ++#define CONFIG_DM_I2C ++#define CONFIG_CMD_I2C ++#define CONFIG_SYS_I2C_SANDBOX ++#define CONFIG_I2C_EDID ++#define CONFIG_I2C_EEPROM ++ + /* Memory things - we don't really want a memory test */ + #define CONFIG_SYS_LOAD_ADDR 0x00000000 + #define CONFIG_SYS_MEMTEST_START 0x00100000 +diff -ruN u-boot-2015.01-rc3/include/configs/seaboard.h u-boot/include/configs/seaboard.h +--- u-boot-2015.01-rc3/include/configs/seaboard.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/seaboard.h 2015-01-01 17:34:32.813494071 +0100 +@@ -37,10 +37,7 @@ + + /* I2C */ + #define CONFIG_SYS_I2C_TEGRA +-#define CONFIG_SYS_I2C_INIT_BOARD +-#define CONFIG_SYS_I2C_SPEED 100000 + #define CONFIG_CMD_I2C +-#define CONFIG_SYS_I2C + + /* SD/MMC */ + #define CONFIG_MMC +diff -ruN u-boot-2015.01-rc3/include/configs/socfpga_common.h u-boot/include/configs/socfpga_common.h +--- u-boot-2015.01-rc3/include/configs/socfpga_common.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/socfpga_common.h 2015-01-01 17:34:32.813494071 +0100 +@@ -159,7 +159,7 @@ + #define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */ + #endif + +- /* ++/* + * I2C support + */ + #define CONFIG_SYS_I2C +@@ -187,6 +187,37 @@ + #define CONFIG_CMD_I2C + + /* ++ * QSPI support ++ */ ++#ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */ ++#define CONFIG_CMD_DM ++#define CONFIG_DM ++#define CONFIG_DM_SPI ++#define CONFIG_DM_SPI_FLASH ++#define CONFIG_CADENCE_QSPI ++/* Enable multiple SPI NOR flash manufacturers */ ++#define CONFIG_SPI_FLASH /* SPI flash subsystem */ ++#define CONFIG_SPI_FLASH_STMICRO /* Micron/Numonyx flash */ ++#define CONFIG_SPI_FLASH_SPANSION /* Spansion flash */ ++#define CONFIG_SPI_FLASH_MTD ++/* QSPI reference clock */ ++#ifndef __ASSEMBLY__ ++unsigned int cm_get_qspi_controller_clk_hz(void); ++#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz() ++#endif ++#define CONFIG_CQSPI_DECODER 0 ++#define CONFIG_CMD_SF ++#endif ++ ++#ifdef CONFIG_OF_CONTROL /* DW SPI is controlled via DT */ ++#define CONFIG_CMD_DM ++#define CONFIG_DM ++#define CONFIG_DM_SPI ++#define CONFIG_DESIGNWARE_SPI ++#define CONFIG_CMD_SPI ++#endif ++ ++/* + * Serial Driver + */ + #define CONFIG_SYS_NS16550 +diff -ruN u-boot-2015.01-rc3/include/configs/stv0991.h u-boot/include/configs/stv0991.h +--- u-boot-2015.01-rc3/include/configs/stv0991.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/include/configs/stv0991.h 2015-01-01 17:34:32.813494071 +0100 +@@ -0,0 +1,95 @@ ++/* ++ * (C) Copyright 2014 ++ * Vikas Manocha, STMicroelectronics, ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __CONFIG_STV0991_H ++#define __CONFIG_STV0991_H ++#define CONFIG_SYS_DCACHE_OFF ++#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH ++#define CONFIG_BOARD_EARLY_INIT_F ++ ++#define CONFIG_SYS_CORTEX_R4 ++ ++#define CONFIG_SYS_GENERIC_BOARD ++#define CONFIG_SYS_NO_FLASH ++ ++/* ram memory-related information */ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM_1 0x00000000 ++#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 ++#define PHYS_SDRAM_1_SIZE 0x00198000 ++ ++#define CONFIG_ENV_SIZE 0x10000 ++#define CONFIG_ENV_IS_IN_FLASH ++#define CONFIG_ENV_ADDR \ ++ (PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE) ++#define CONFIG_SYS_MAXARGS 16 ++#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024) ++#define CONFIG_SYS_MALLOC_F_LEN 0x2000 ++ ++#define CONFIG_DM ++/* serial port (PL011) configuration */ ++#define CONFIG_BAUDRATE 115200 ++#ifdef CONFIG_DM ++#define CONFIG_DM_SERIAL ++#define CONFIG_PL01X_SERIAL ++#else ++#define CONFIG_SYS_SERIAL0 0x80406000 ++#define CONFIG_CONS_INDEX 0 ++#define CONFIG_PL011_SERIAL ++#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0} ++#define CONFIG_PL011_CLOCK (2700 * 1000) ++#endif ++ ++/* user interface */ ++#define CONFIG_SYS_PROMPT "STV0991> " ++#define CONFIG_SYS_CBSIZE 1024 ++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ ++ +sizeof(CONFIG_SYS_PROMPT) + 16) ++ ++/* MISC */ ++#define CONFIG_SYS_LOAD_ADDR 0x00000000 ++#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 ++#define CONFIG_SYS_INIT_RAM_ADDR 0x00190000 ++#define CONFIG_SYS_INIT_SP_OFFSET \ ++ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) ++/* U-boot Load Address */ ++#define CONFIG_SYS_TEXT_BASE 0x00010000 ++#define CONFIG_SYS_INIT_SP_ADDR \ ++ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) ++ ++/* GMAC related configs */ ++ ++#define CONFIG_MII ++#define CONFIG_PHYLIB ++#define CONFIG_CMD_NET ++#define CONFIG_DESIGNWARE_ETH ++#define CONFIG_DW_ALTDESCRIPTOR ++#define CONFIG_PHY_MICREL ++ ++/* Command support defines */ ++#define CONFIG_CMD_PING ++#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ ++ ++#include "config_cmd_default.h" ++#undef CONFIG_CMD_SAVEENV ++ ++#define CONFIG_SYS_MEMTEST_START 0x0000 ++#define CONFIG_SYS_MEMTEST_END 1024*1024 ++#define CONFIG_CMD_MEMTEST ++ ++/* Misc configuration */ ++#define CONFIG_SYS_LONGHELP ++#define CONFIG_CMDLINE_EDITING ++ ++#define CONFIG_BOOTDELAY 3 ++#define CONFIG_BOOTCOMMAND "go 0x40040000" ++#define CONFIG_AUTOBOOT_KEYED ++#define CONFIG_AUTOBOOT_STOP_STR " " ++#define CONFIG_AUTOBOOT_PROMPT \ ++ "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay ++ ++#endif /* __CONFIG_H */ +diff -ruN u-boot-2015.01-rc3/include/configs/sun7i.h u-boot/include/configs/sun7i.h +--- u-boot-2015.01-rc3/include/configs/sun7i.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/sun7i.h 2015-01-01 17:34:32.813494071 +0100 +@@ -25,6 +25,7 @@ + #define CONFIG_ARMV7_PSCI 1 + #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE + #define CONFIG_SYS_CLK_FREQ 24000000 ++#define CONFIG_TIMER_CLK_FREQ CONFIG_SYS_CLK_FREQ + + /* + * Include common sunxi configuration where most the settings are +diff -ruN u-boot-2015.01-rc3/include/configs/T102xQDS.h u-boot/include/configs/T102xQDS.h +--- u-boot-2015.01-rc3/include/configs/T102xQDS.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/T102xQDS.h 2015-01-01 17:34:32.773494727 +0100 +@@ -720,7 +720,7 @@ + /* Qman/Bman */ + #ifndef CONFIG_NOBQFMAN + #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +-#define CONFIG_SYS_BMAN_NUM_PORTALS 25 ++#define CONFIG_SYS_BMAN_NUM_PORTALS 10 + #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 + #ifdef CONFIG_PHYS_64BIT + #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +@@ -728,7 +728,15 @@ + #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE + #endif + #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +-#define CONFIG_SYS_QMAN_NUM_PORTALS 25 ++#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE ++#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ ++ CONFIG_SYS_BMAN_CENA_SIZE) ++#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 ++#define CONFIG_SYS_QMAN_NUM_PORTALS 10 + #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 + #ifdef CONFIG_PHYS_64BIT + #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +@@ -736,6 +744,14 @@ + #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE + #endif + #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE ++#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ ++ CONFIG_SYS_QMAN_CENA_SIZE) ++#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + + #define CONFIG_SYS_DPAA_FMAN + +diff -ruN u-boot-2015.01-rc3/include/configs/T102xRDB.h u-boot/include/configs/T102xRDB.h +--- u-boot-2015.01-rc3/include/configs/T102xRDB.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/T102xRDB.h 2015-01-01 17:34:32.773494727 +0100 +@@ -677,7 +677,7 @@ + /* Qman/Bman */ + #ifndef CONFIG_NOBQFMAN + #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +-#define CONFIG_SYS_BMAN_NUM_PORTALS 25 ++#define CONFIG_SYS_BMAN_NUM_PORTALS 10 + #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 + #ifdef CONFIG_PHYS_64BIT + #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +@@ -685,7 +685,15 @@ + #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE + #endif + #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +-#define CONFIG_SYS_QMAN_NUM_PORTALS 25 ++#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE ++#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ ++ CONFIG_SYS_BMAN_CENA_SIZE) ++#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 ++#define CONFIG_SYS_QMAN_NUM_PORTALS 10 + #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 + #ifdef CONFIG_PHYS_64BIT + #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +@@ -693,6 +701,14 @@ + #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE + #endif + #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE ++#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ ++ CONFIG_SYS_QMAN_CENA_SIZE) ++#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + + #define CONFIG_SYS_DPAA_FMAN + +diff -ruN u-boot-2015.01-rc3/include/configs/T1040QDS.h u-boot/include/configs/T1040QDS.h +--- u-boot-2015.01-rc3/include/configs/T1040QDS.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/T1040QDS.h 2015-01-01 17:34:32.773494727 +0100 +@@ -605,14 +605,30 @@ + /* Qman/Bman */ + #ifndef CONFIG_NOBQFMAN + #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +-#define CONFIG_SYS_BMAN_NUM_PORTALS 25 ++#define CONFIG_SYS_BMAN_NUM_PORTALS 10 + #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 + #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull + #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +-#define CONFIG_SYS_QMAN_NUM_PORTALS 25 ++#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE ++#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ ++ CONFIG_SYS_BMAN_CENA_SIZE) ++#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 ++#define CONFIG_SYS_QMAN_NUM_PORTALS 10 + #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 + #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull + #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE ++#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ ++ CONFIG_SYS_QMAN_CENA_SIZE) ++#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + + #define CONFIG_SYS_DPAA_FMAN + #define CONFIG_SYS_DPAA_PME +diff -ruN u-boot-2015.01-rc3/include/configs/T104xRDB.h u-boot/include/configs/T104xRDB.h +--- u-boot-2015.01-rc3/include/configs/T104xRDB.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/T104xRDB.h 2015-01-01 17:34:32.773494727 +0100 +@@ -104,7 +104,10 @@ + + /* support deep sleep */ + #define CONFIG_DEEP_SLEEP ++#if defined(CONFIG_DEEP_SLEEP) ++#define CONFIG_BOARD_EARLY_INIT_F + #define CONFIG_SILENT_CONSOLE ++#endif + + #ifndef CONFIG_SYS_TEXT_BASE + #define CONFIG_SYS_TEXT_BASE 0xeff40000 +@@ -636,14 +639,30 @@ + /* Qman/Bman */ + #ifndef CONFIG_NOBQFMAN + #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +-#define CONFIG_SYS_BMAN_NUM_PORTALS 25 ++#define CONFIG_SYS_BMAN_NUM_PORTALS 10 + #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 + #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull + #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +-#define CONFIG_SYS_QMAN_NUM_PORTALS 25 ++#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE ++#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ ++ CONFIG_SYS_BMAN_CENA_SIZE) ++#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 ++#define CONFIG_SYS_QMAN_NUM_PORTALS 10 + #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 + #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull + #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE ++#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ ++ CONFIG_SYS_QMAN_CENA_SIZE) ++#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + + #define CONFIG_SYS_DPAA_FMAN + #define CONFIG_SYS_DPAA_PME +diff -ruN u-boot-2015.01-rc3/include/configs/T208xQDS.h u-boot/include/configs/T208xQDS.h +--- u-boot-2015.01-rc3/include/configs/T208xQDS.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/T208xQDS.h 2015-01-01 17:34:32.773494727 +0100 +@@ -634,10 +634,26 @@ + #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 + #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull + #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE ++#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ ++ CONFIG_SYS_BMAN_CENA_SIZE) ++#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 + #define CONFIG_SYS_QMAN_NUM_PORTALS 18 + #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 + #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull + #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE ++#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ ++ CONFIG_SYS_QMAN_CENA_SIZE) ++#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + + #define CONFIG_SYS_DPAA_FMAN + #define CONFIG_SYS_DPAA_PME +diff -ruN u-boot-2015.01-rc3/include/configs/T208xRDB.h u-boot/include/configs/T208xRDB.h +--- u-boot-2015.01-rc3/include/configs/T208xRDB.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/T208xRDB.h 2015-01-01 17:34:32.773494727 +0100 +@@ -567,10 +567,26 @@ + #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 + #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull + #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE ++#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ ++ CONFIG_SYS_BMAN_CENA_SIZE) ++#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 + #define CONFIG_SYS_QMAN_NUM_PORTALS 18 + #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 + #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull + #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE ++#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ ++ CONFIG_SYS_QMAN_CENA_SIZE) ++#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + + #define CONFIG_SYS_DPAA_FMAN + #define CONFIG_SYS_DPAA_PME +diff -ruN u-boot-2015.01-rc3/include/configs/T4240EMU.h u-boot/include/configs/T4240EMU.h +--- u-boot-2015.01-rc3/include/configs/T4240EMU.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/T4240EMU.h 2015-01-01 17:34:32.773494727 +0100 +@@ -85,10 +85,26 @@ + #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 + #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull + #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE ++#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ ++ CONFIG_SYS_BMAN_CENA_SIZE) ++#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 + #define CONFIG_SYS_QMAN_NUM_PORTALS 50 + #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 + #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull + #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE ++#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ ++ CONFIG_SYS_QMAN_CENA_SIZE) ++#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + + #define CONFIG_SYS_DPAA_FMAN + #define CONFIG_SYS_DPAA_PME +diff -ruN u-boot-2015.01-rc3/include/configs/T4240QDS.h u-boot/include/configs/T4240QDS.h +--- u-boot-2015.01-rc3/include/configs/T4240QDS.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/T4240QDS.h 2015-01-01 17:34:32.773494727 +0100 +@@ -417,10 +417,26 @@ + #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 + #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull + #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE ++#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ ++ CONFIG_SYS_BMAN_CENA_SIZE) ++#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 + #define CONFIG_SYS_QMAN_NUM_PORTALS 50 + #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 + #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull + #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE ++#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ ++ CONFIG_SYS_QMAN_CENA_SIZE) ++#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + + #define CONFIG_SYS_DPAA_FMAN + #define CONFIG_SYS_DPAA_PME +diff -ruN u-boot-2015.01-rc3/include/configs/T4240RDB.h u-boot/include/configs/T4240RDB.h +--- u-boot-2015.01-rc3/include/configs/T4240RDB.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/T4240RDB.h 2015-01-01 17:34:32.773494727 +0100 +@@ -12,6 +12,8 @@ + + #define CONFIG_T4240RDB + #define CONFIG_PHYS_64BIT ++#define CONFIG_SYS_GENERIC_BOARD ++#define CONFIG_DISPLAY_BOARDINFO + + #define CONFIG_FSL_SATA_V2 + #define CONFIG_PCIE4 +@@ -577,10 +579,26 @@ + #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 + #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull + #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE ++#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ ++ CONFIG_SYS_BMAN_CENA_SIZE) ++#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 + #define CONFIG_SYS_QMAN_NUM_PORTALS 50 + #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 + #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull + #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 ++#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 ++#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 ++#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE ++#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ ++ CONFIG_SYS_QMAN_CENA_SIZE) ++#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) ++#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + + #define CONFIG_SYS_DPAA_FMAN + #define CONFIG_SYS_DPAA_PME +diff -ruN u-boot-2015.01-rc3/include/configs/tbs2910.h u-boot/include/configs/tbs2910.h +--- u-boot-2015.01-rc3/include/configs/tbs2910.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/tbs2910.h 2015-01-01 17:34:32.817494006 +0100 +@@ -167,7 +167,7 @@ + #define CONFIG_USB_STORAGE + #define CONFIG_USB_KEYBOARD + #ifdef CONFIG_USB_KEYBOARD +-#define CONFIG_SYS_USB_EVENT_POLL ++#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE + #define CONFIG_SYS_STDIO_DEREGISTER + #define CONFIG_PREBOOT "if hdmidet; then usb start; fi" + #endif /* CONFIG_USB_KEYBOARD */ +diff -ruN u-boot-2015.01-rc3/include/configs/tec-ng.h u-boot/include/configs/tec-ng.h +--- u-boot-2015.01-rc3/include/configs/tec-ng.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/tec-ng.h 2015-01-01 17:34:32.817494006 +0100 +@@ -23,12 +23,7 @@ + + /* I2C */ + #define CONFIG_SYS_I2C_TEGRA +-#define CONFIG_SYS_I2C_INIT_BOARD +-#define CONFIG_I2C_MULTI_BUS +-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS +-#define CONFIG_SYS_I2C_SPEED 100000 + #define CONFIG_CMD_I2C +-#define CONFIG_SYS_I2C + + /* SD/MMC */ + #define CONFIG_MMC +diff -ruN u-boot-2015.01-rc3/include/configs/tegra114-common.h u-boot/include/configs/tegra114-common.h +--- u-boot-2015.01-rc3/include/configs/tegra114-common.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/tegra114-common.h 2015-01-01 17:34:32.817494006 +0100 +@@ -76,9 +76,6 @@ + #define CONFIG_SYS_SPL_MALLOC_START 0x80090000 + #define CONFIG_SPL_STACK 0x800ffffc + +-/* Total I2C ports on Tegra114 */ +-#define TEGRA_I2C_NUM_CONTROLLERS 5 +- + /* For USB EHCI controller */ + #define CONFIG_EHCI_IS_TDI + #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 +diff -ruN u-boot-2015.01-rc3/include/configs/tegra124-common.h u-boot/include/configs/tegra124-common.h +--- u-boot-2015.01-rc3/include/configs/tegra124-common.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/tegra124-common.h 2015-01-01 17:34:32.817494006 +0100 +@@ -68,9 +68,6 @@ + #define CONFIG_SYS_SPL_MALLOC_START 0x80090000 + #define CONFIG_SPL_STACK 0x800ffffc + +-/* Total I2C ports on Tegra124 */ +-#define TEGRA_I2C_NUM_CONTROLLERS 5 +- + /* For USB EHCI controller */ + #define CONFIG_EHCI_IS_TDI + #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 +diff -ruN u-boot-2015.01-rc3/include/configs/tegra20-common.h u-boot/include/configs/tegra20-common.h +--- u-boot-2015.01-rc3/include/configs/tegra20-common.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/tegra20-common.h 2015-01-01 17:34:32.817494006 +0100 +@@ -97,9 +97,6 @@ + #define CONFIG_EHCI_IS_TDI + #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 + +-/* Total I2C ports on Tegra20 */ +-#define TEGRA_I2C_NUM_CONTROLLERS 4 +- + #define CONFIG_SYS_NAND_SELF_INIT + #define CONFIG_SYS_NAND_ONFI_DETECTION + +diff -ruN u-boot-2015.01-rc3/include/configs/tegra30-common.h u-boot/include/configs/tegra30-common.h +--- u-boot-2015.01-rc3/include/configs/tegra30-common.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/tegra30-common.h 2015-01-01 17:34:32.817494006 +0100 +@@ -73,9 +73,6 @@ + #define CONFIG_SYS_SPL_MALLOC_START 0x80090000 + #define CONFIG_SPL_STACK 0x800ffffc + +-/* Total I2C ports on Tegra30 */ +-#define TEGRA_I2C_NUM_CONTROLLERS 5 +- + /* For USB EHCI controller */ + #define CONFIG_EHCI_IS_TDI + #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 +diff -ruN u-boot-2015.01-rc3/include/configs/tegra-common.h u-boot/include/configs/tegra-common.h +--- u-boot-2015.01-rc3/include/configs/tegra-common.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/tegra-common.h 2015-01-01 17:34:32.817494006 +0100 +@@ -26,6 +26,7 @@ + #endif + #define CONFIG_DM_SPI + #define CONFIG_DM_SPI_FLASH ++#define CONFIG_DM_I2C + + #define CONFIG_SYS_TIMER_RATE 1000000 + #define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE +diff -ruN u-boot-2015.01-rc3/include/configs/trimslice.h u-boot/include/configs/trimslice.h +--- u-boot-2015.01-rc3/include/configs/trimslice.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/trimslice.h 2015-01-01 17:34:32.817494006 +0100 +@@ -34,10 +34,7 @@ + + /* I2C */ + #define CONFIG_SYS_I2C_TEGRA +-#define CONFIG_SYS_I2C_INIT_BOARD +-#define CONFIG_SYS_I2C_SPEED 100000 + #define CONFIG_CMD_I2C +-#define CONFIG_SYS_I2C + + /* SD/MMC */ + #define CONFIG_MMC +diff -ruN u-boot-2015.01-rc3/include/configs/uniphier.h u-boot/include/configs/uniphier.h +--- u-boot-2015.01-rc3/include/configs/uniphier.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/uniphier.h 2015-01-01 17:34:32.817494006 +0100 +@@ -187,6 +187,8 @@ + #define CONFIG_FAT_WRITE + #define CONFIG_DOS_PARTITION + ++#define CONFIG_CMD_DM ++ + /* memtest works on */ + #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) +@@ -273,7 +275,11 @@ + #define CONFIG_SYS_SPL_MALLOC_START (0x0ff00000) + #define CONFIG_SYS_SPL_MALLOC_SIZE (0x00004000) + ++#ifdef CONFIG_SPL_BUILD + #define CONFIG_SYS_INIT_SP_ADDR (0x0ff08000) ++#else ++#define CONFIG_SYS_INIT_SP_ADDR ((CONFIG_SYS_TEXT_BASE) - 0x00001000) ++#endif + + #define CONFIG_SPL_FRAMEWORK + #define CONFIG_SPL_NAND_SUPPORT +diff -ruN u-boot-2015.01-rc3/include/configs/venice2.h u-boot/include/configs/venice2.h +--- u-boot-2015.01-rc3/include/configs/venice2.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/venice2.h 2015-01-01 17:34:32.821493940 +0100 +@@ -25,12 +25,7 @@ + + /* I2C */ + #define CONFIG_SYS_I2C_TEGRA +-#define CONFIG_SYS_I2C_INIT_BOARD +-#define CONFIG_I2C_MULTI_BUS +-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS +-#define CONFIG_SYS_I2C_SPEED 100000 + #define CONFIG_CMD_I2C +-#define CONFIG_SYS_I2C + + /* SD/MMC */ + #define CONFIG_MMC +diff -ruN u-boot-2015.01-rc3/include/configs/vexpress_aemv8a.h u-boot/include/configs/vexpress_aemv8a.h +--- u-boot-2015.01-rc3/include/configs/vexpress_aemv8a.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/vexpress_aemv8a.h 2015-01-01 17:34:32.821493940 +0100 +@@ -8,6 +8,9 @@ + #ifndef __VEXPRESS_AEMV8A_H + #define __VEXPRESS_AEMV8A_H + ++/* We use generic board for v8 Versatile Express */ ++#define CONFIG_SYS_GENERIC_BOARD ++ + #ifdef CONFIG_BASE_FVP + #ifndef CONFIG_SEMIHOSTING + #error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING +@@ -25,8 +28,6 @@ + + /*#define CONFIG_ARMV8_SWITCH_TO_EL1*/ + +-/*#define CONFIG_SYS_GENERIC_BOARD*/ +- + #define CONFIG_SYS_NO_FLASH + + #define CONFIG_SUPPORT_RAW_INITRD +diff -ruN u-boot-2015.01-rc3/include/configs/whistler.h u-boot/include/configs/whistler.h +--- u-boot-2015.01-rc3/include/configs/whistler.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/configs/whistler.h 2015-01-01 17:34:32.821493940 +0100 +@@ -26,10 +26,7 @@ + + /* I2C */ + #define CONFIG_SYS_I2C_TEGRA +-#define CONFIG_SYS_I2C_INIT_BOARD +-#define CONFIG_SYS_I2C_SPEED 100000 + #define CONFIG_CMD_I2C +-#define CONFIG_SYS_I2C + + /* SD/MMC */ + #define CONFIG_MMC +diff -ruN u-boot-2015.01-rc3/include/dfu.h u-boot/include/dfu.h +--- u-boot-2015.01-rc3/include/dfu.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/dfu.h 2015-01-01 17:34:32.825493874 +0100 +@@ -150,9 +150,6 @@ + char *dfu_extract_token(char** e, int *n); + void dfu_trigger_reset(void); + int dfu_get_alt(char *name); +-bool dfu_detach(void); +-void dfu_trigger_detach(void); +-void dfu_clear_detach(void); + int dfu_init_env_entities(char *interface, char *devstr); + unsigned char *dfu_get_buf(struct dfu_entity *dfu); + unsigned char *dfu_free_buf(void); +diff -ruN u-boot-2015.01-rc3/include/dm/uclass-id.h u-boot/include/dm/uclass-id.h +--- u-boot-2015.01-rc3/include/dm/uclass-id.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/dm/uclass-id.h 2015-01-01 17:34:32.825493874 +0100 +@@ -19,6 +19,7 @@ + UCLASS_TEST_FDT, + UCLASS_TEST_BUS, + UCLASS_SPI_EMUL, /* sandbox SPI device emulator */ ++ UCLASS_I2C_EMUL, /* sandbox I2C device emulator */ + UCLASS_SIMPLE_BUS, + + /* U-Boot uclasses start here */ +@@ -29,6 +30,9 @@ + UCLASS_SPI_FLASH, /* SPI flash */ + UCLASS_CROS_EC, /* Chrome OS EC */ + UCLASS_THERMAL, /* Thermal sensor */ ++ UCLASS_I2C, /* I2C bus */ ++ UCLASS_I2C_GENERIC, /* Generic I2C device */ ++ UCLASS_I2C_EEPROM, /* I2C EEPROM device */ + + UCLASS_COUNT, + UCLASS_INVALID = -1, +diff -ruN u-boot-2015.01-rc3/include/dm/ut.h u-boot/include/dm/ut.h +--- u-boot-2015.01-rc3/include/dm/ut.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/dm/ut.h 2015-01-01 17:34:32.825493874 +0100 +@@ -89,6 +89,18 @@ + } \ + } + ++/* Assert that a pointer is not NULL */ ++#define ut_assertnonnull(expr) { \ ++ const void *val = (expr); \ ++ \ ++ if (val == NULL) { \ ++ ut_failf(dms, __FILE__, __LINE__, __func__, \ ++ #expr " = NULL", \ ++ "Expected non-null, got NULL"); \ ++ return -1; \ ++ } \ ++} ++ + /* Assert that an operation succeeds (returns 0) */ + #define ut_assertok(cond) ut_asserteq(0, cond) + +diff -ruN u-boot-2015.01-rc3/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/include/dt-bindings/pinctrl/pinctrl-tegra.h +--- u-boot-2015.01-rc3/include/dt-bindings/pinctrl/pinctrl-tegra.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/include/dt-bindings/pinctrl/pinctrl-tegra.h 2015-01-01 17:34:32.825493874 +0100 +@@ -0,0 +1,45 @@ ++/* ++ * This header provides constants for Tegra pinctrl bindings. ++ * ++ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. ++ * ++ * Author: Laxman Dewangan ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms and conditions of the GNU General Public License, ++ * version 2, as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ */ ++ ++#ifndef _DT_BINDINGS_PINCTRL_TEGRA_H ++#define _DT_BINDINGS_PINCTRL_TEGRA_H ++ ++/* ++ * Enable/disable for diffeent dt properties. This is applicable for ++ * properties nvidia,enable-input, nvidia,tristate, nvidia,open-drain, ++ * nvidia,lock, nvidia,rcv-sel, nvidia,high-speed-mode, nvidia,schmitt. ++ */ ++#define TEGRA_PIN_DISABLE 0 ++#define TEGRA_PIN_ENABLE 1 ++ ++#define TEGRA_PIN_PULL_NONE 0 ++#define TEGRA_PIN_PULL_DOWN 1 ++#define TEGRA_PIN_PULL_UP 2 ++ ++/* Low power mode driver */ ++#define TEGRA_PIN_LP_DRIVE_DIV_8 0 ++#define TEGRA_PIN_LP_DRIVE_DIV_4 1 ++#define TEGRA_PIN_LP_DRIVE_DIV_2 2 ++#define TEGRA_PIN_LP_DRIVE_DIV_1 3 ++ ++/* Rising/Falling slew rate */ ++#define TEGRA_PIN_SLEW_RATE_FASTEST 0 ++#define TEGRA_PIN_SLEW_RATE_FAST 1 ++#define TEGRA_PIN_SLEW_RATE_SLOW 2 ++#define TEGRA_PIN_SLEW_RATE_SLOWEST 3 ++ ++#endif +diff -ruN u-boot-2015.01-rc3/include/dt-bindings/reset/altr,rst-mgr.h u-boot/include/dt-bindings/reset/altr,rst-mgr.h +--- u-boot-2015.01-rc3/include/dt-bindings/reset/altr,rst-mgr.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/dt-bindings/reset/altr,rst-mgr.h 2015-01-01 17:34:32.825493874 +0100 +@@ -1,14 +1,7 @@ + /* + * Copyright (c) 2014, Steffen Trumtrar + * +- * This software is licensed under the terms of the GNU General Public +- * License version 2, as published by the Free Software Foundation, and +- * may be copied, distributed, and modified under those terms. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. ++ * SPDX-License-Identifier: GPL-2.0 + */ + + #ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_H +diff -ruN u-boot-2015.01-rc3/include/errno.h u-boot/include/errno.h +--- u-boot-2015.01-rc3/include/errno.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/errno.h 2015-01-01 17:34:32.829493808 +0100 +@@ -6,4 +6,7 @@ + + #define __set_errno(val) do { errno = val; } while (0) + ++#ifdef CONFIG_ERRNO_STR ++const char *errno_str(int errno); ++#endif + #endif /* _ERRNO_H */ +diff -ruN u-boot-2015.01-rc3/include/fsl_ddr_sdram.h u-boot/include/fsl_ddr_sdram.h +--- u-boot-2015.01-rc3/include/fsl_ddr_sdram.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/fsl_ddr_sdram.h 2015-01-01 17:34:32.829493808 +0100 +@@ -114,6 +114,7 @@ + #define SDRAM_CFG_2T_EN 0x00008000 + #define SDRAM_CFG_BI 0x00000001 + ++#define SDRAM_CFG2_FRC_SR 0x80000000 + #define SDRAM_CFG2_D_INIT 0x00000010 + #define SDRAM_CFG2_ODT_CFG_MASK 0x00600000 + #define SDRAM_CFG2_ODT_NEVER 0 +@@ -163,6 +164,7 @@ + #define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT) + #define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK) + #define DDR_CDR2_VREF_OVRD(x) (0x00008080 | ((((x) - 37) & 0x3F) << 8)) ++#define DDR_CDR2_VREF_TRAIN_EN 0x00000080 + + #if (defined(CONFIG_SYS_FSL_DDR_VER) && \ + (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7)) +@@ -202,6 +204,8 @@ + #define DDR_CDR_ODT_120ohm 0x6 + #endif + ++#define DDR_INIT_ADDR_EXT_UIA (1 << 31) ++ + /* Record of register values computed */ + typedef struct fsl_ddr_cfg_regs_s { + struct { +@@ -414,9 +418,11 @@ + int board_need_mem_reset(void) + __attribute__((weak, alias("__board_need_mem_reset"))); + +-void __weak board_mem_sleep_setup(void) +-{ +-} ++#if defined(CONFIG_DEEP_SLEEP) ++void board_mem_sleep_setup(void); ++bool is_warm_boot(void); ++int fsl_dp_resume(void); ++#endif + + /* + * The 85xx boards have a common prototype for fixed_sdram so put the +diff -ruN u-boot-2015.01-rc3/include/fsl_usb.h u-boot/include/fsl_usb.h +--- u-boot-2015.01-rc3/include/fsl_usb.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/fsl_usb.h 2015-01-01 17:34:32.829493808 +0100 +@@ -145,6 +145,25 @@ + return SVR_SOC_VER(get_svr()) == SVR_T4240 && + IS_SVR_REV(get_svr(), 2, 0); + } ++ ++static inline bool has_erratum_a007792(void) ++{ ++ u32 svr = get_svr(); ++ u32 soc = SVR_SOC_VER(svr); ++ ++ switch (soc) { ++ case SVR_T4240: ++ case SVR_T4160: ++ return IS_SVR_REV(svr, 2, 0); ++ case SVR_T1040: ++ return IS_SVR_REV(svr, 1, 0); ++ case SVR_T2080: ++ case SVR_T2081: ++ return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1); ++ } ++ return false; ++} ++ + #else + static inline bool has_erratum_a006261(void) + { +@@ -161,5 +180,9 @@ + return false; + } + ++static inline bool has_erratum_a007792(void) ++{ ++ return false; ++} + #endif + #endif /*_ASM_FSL_USB_H_ */ +diff -ruN u-boot-2015.01-rc3/include/g_dnl.h u-boot/include/g_dnl.h +--- u-boot-2015.01-rc3/include/g_dnl.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/g_dnl.h 2015-01-01 17:34:32.829493808 +0100 +@@ -39,4 +39,8 @@ + void g_dnl_unregister(void); + void g_dnl_set_serialnumber(char *); + ++bool g_dnl_detach(void); ++void g_dnl_trigger_detach(void); ++void g_dnl_clear_detach(void); ++ + #endif /* __G_DOWNLOAD_H_ */ +diff -ruN u-boot-2015.01-rc3/include/i2c_eeprom.h u-boot/include/i2c_eeprom.h +--- u-boot-2015.01-rc3/include/i2c_eeprom.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/include/i2c_eeprom.h 2015-01-01 17:34:32.833493744 +0100 +@@ -0,0 +1,19 @@ ++/* ++ * Copyright (c) 2014 Google, Inc ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __I2C_EEPROM ++#define __I2C_EEPROM ++ ++struct i2c_eeprom_ops { ++ int (*read)(struct udevice *dev, int offset, uint8_t *buf, int size); ++ int (*write)(struct udevice *dev, int offset, const uint8_t *buf, ++ int size); ++}; ++ ++struct i2c_eeprom { ++}; ++ ++#endif +diff -ruN u-boot-2015.01-rc3/include/i2c.h u-boot/include/i2c.h +--- u-boot-2015.01-rc3/include/i2c.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/i2c.h 2015-01-01 17:34:32.833493744 +0100 +@@ -18,6 +18,355 @@ + #define _I2C_H_ + + /* ++ * For now there are essentially two parts to this file - driver model ++ * here at the top, and the older code below (with CONFIG_SYS_I2C being ++ * most recent). The plan is to migrate everything to driver model. ++ * The driver model structures and API are separate as they are different ++ * enough as to be incompatible for compilation purposes. ++ */ ++ ++#ifdef CONFIG_DM_I2C ++ ++enum dm_i2c_chip_flags { ++ DM_I2C_CHIP_10BIT = 1 << 0, /* Use 10-bit addressing */ ++ DM_I2C_CHIP_RD_ADDRESS = 1 << 1, /* Send address for each read byte */ ++ DM_I2C_CHIP_WR_ADDRESS = 1 << 2, /* Send address for each write byte */ ++}; ++ ++/** ++ * struct dm_i2c_chip - information about an i2c chip ++ * ++ * An I2C chip is a device on the I2C bus. It sits at a particular address ++ * and normally supports 7-bit or 10-bit addressing. ++ * ++ * To obtain this structure, use dev_get_parentdata(dev) where dev is the ++ * chip to examine. ++ * ++ * @chip_addr: Chip address on bus ++ * @offset_len: Length of offset in bytes. A single byte offset can ++ * represent up to 256 bytes. A value larger than 1 may be ++ * needed for larger devices. ++ * @flags: Flags for this chip (dm_i2c_chip_flags) ++ * @emul: Emulator for this chip address (only used for emulation) ++ */ ++struct dm_i2c_chip { ++ uint chip_addr; ++ uint offset_len; ++ uint flags; ++#ifdef CONFIG_SANDBOX ++ struct udevice *emul; ++#endif ++}; ++ ++/** ++ * struct dm_i2c_bus- information about an i2c bus ++ * ++ * An I2C bus contains 0 or more chips on it, each at its own address. The ++ * bus can operate at different speeds (measured in Hz, typically 100KHz ++ * or 400KHz). ++ * ++ * To obtain this structure, use bus->uclass_priv where bus is the I2C ++ * bus udevice. ++ * ++ * @speed_hz: Bus speed in hertz (typically 100000) ++ */ ++struct dm_i2c_bus { ++ int speed_hz; ++}; ++ ++/** ++ * i2c_read() - read bytes from an I2C chip ++ * ++ * To obtain an I2C device (called a 'chip') given the I2C bus address you ++ * can use i2c_get_chip(). To obtain a bus by bus number use ++ * uclass_get_device_by_seq(UCLASS_I2C, ). ++ * ++ * To set the address length of a devce use i2c_set_addr_len(). It ++ * defaults to 1. ++ * ++ * @dev: Chip to read from ++ * @offset: Offset within chip to start reading ++ * @buffer: Place to put data ++ * @len: Number of bytes to read ++ * ++ * @return 0 on success, -ve on failure ++ */ ++int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, ++ int len); ++ ++/** ++ * i2c_write() - write bytes to an I2C chip ++ * ++ * See notes for i2c_read() above. ++ * ++ * @dev: Chip to write to ++ * @offset: Offset within chip to start writing ++ * @buffer: Buffer containing data to write ++ * @len: Number of bytes to write ++ * ++ * @return 0 on success, -ve on failure ++ */ ++int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, ++ int len); ++ ++/** ++ * i2c_probe() - probe a particular chip address ++ * ++ * This can be useful to check for the existence of a chip on the bus. ++ * It is typically implemented by writing the chip address to the bus ++ * and checking that the chip replies with an ACK. ++ * ++ * @bus: Bus to probe ++ * @chip_addr: 7-bit address to probe (10-bit and others are not supported) ++ * @chip_flags: Flags for the probe (see enum dm_i2c_chip_flags) ++ * @devp: Returns the device found, or NULL if none ++ * @return 0 if a chip was found at that address, -ve if not ++ */ ++int i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags, ++ struct udevice **devp); ++ ++/** ++ * i2c_set_bus_speed() - set the speed of a bus ++ * ++ * @bus: Bus to adjust ++ * @speed: Requested speed in Hz ++ * @return 0 if OK, -EINVAL for invalid values ++ */ ++int i2c_set_bus_speed(struct udevice *bus, unsigned int speed); ++ ++/** ++ * i2c_get_bus_speed() - get the speed of a bus ++ * ++ * @bus: Bus to check ++ * @return speed of selected I2C bus in Hz, -ve on error ++ */ ++int i2c_get_bus_speed(struct udevice *bus); ++ ++/** ++ * i2c_set_chip_flags() - set flags for a chip ++ * ++ * Typically addresses are 7 bits, but for 10-bit addresses you should set ++ * flags to DM_I2C_CHIP_10BIT. All accesses will then use 10-bit addressing. ++ * ++ * @dev: Chip to adjust ++ * @flags: New flags ++ * @return 0 if OK, -EINVAL if value is unsupported, other -ve value on error ++ */ ++int i2c_set_chip_flags(struct udevice *dev, uint flags); ++ ++/** ++ * i2c_get_chip_flags() - get flags for a chip ++ * ++ * @dev: Chip to check ++ * @flagsp: Place to put flags ++ * @return 0 if OK, other -ve value on error ++ */ ++int i2c_get_chip_flags(struct udevice *dev, uint *flagsp); ++ ++/** ++ * i2c_set_offset_len() - set the offset length for a chip ++ * ++ * The offset used to access a chip may be up to 4 bytes long. Typically it ++ * is only 1 byte, which is enough for chips with 256 bytes of memory or ++ * registers. The default value is 1, but you can call this function to ++ * change it. ++ * ++ * @offset_len: New offset length value (typically 1 or 2) ++ */ ++ ++int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len); ++/** ++ * i2c_deblock() - recover a bus that is in an unknown state ++ * ++ * See the deblock() method in 'struct dm_i2c_ops' for full information ++ * ++ * @bus: Bus to recover ++ * @return 0 if OK, -ve on error ++ */ ++int i2c_deblock(struct udevice *bus); ++ ++/* ++ * Not all of these flags are implemented in the U-Boot API ++ */ ++enum dm_i2c_msg_flags { ++ I2C_M_TEN = 0x0010, /* ten-bit chip address */ ++ I2C_M_RD = 0x0001, /* read data, from slave to master */ ++ I2C_M_STOP = 0x8000, /* send stop after this message */ ++ I2C_M_NOSTART = 0x4000, /* no start before this message */ ++ I2C_M_REV_DIR_ADDR = 0x2000, /* invert polarity of R/W bit */ ++ I2C_M_IGNORE_NAK = 0x1000, /* continue after NAK */ ++ I2C_M_NO_RD_ACK = 0x0800, /* skip the Ack bit on reads */ ++ I2C_M_RECV_LEN = 0x0400, /* length is first received byte */ ++}; ++ ++/** ++ * struct i2c_msg - an I2C message ++ * ++ * @addr: Slave address ++ * @flags: Flags (see enum dm_i2c_msg_flags) ++ * @len: Length of buffer in bytes, may be 0 for a probe ++ * @buf: Buffer to send/receive, or NULL if no data ++ */ ++struct i2c_msg { ++ uint addr; ++ uint flags; ++ uint len; ++ u8 *buf; ++}; ++ ++/** ++ * struct i2c_msg_list - a list of I2C messages ++ * ++ * This is called i2c_rdwr_ioctl_data in Linux but the name does not seem ++ * appropriate in U-Boot. ++ * ++ * @msg: Pointer to i2c_msg array ++ * @nmsgs: Number of elements in the array ++ */ ++struct i2c_msg_list { ++ struct i2c_msg *msgs; ++ uint nmsgs; ++}; ++ ++/** ++ * struct dm_i2c_ops - driver operations for I2C uclass ++ * ++ * Drivers should support these operations unless otherwise noted. These ++ * operations are intended to be used by uclass code, not directly from ++ * other code. ++ */ ++struct dm_i2c_ops { ++ /** ++ * xfer() - transfer a list of I2C messages ++ * ++ * @bus: Bus to read from ++ * @msg: List of messages to transfer ++ * @nmsgs: Number of messages in the list ++ * @return 0 if OK, -EREMOTEIO if the slave did not ACK a byte, ++ * -ECOMM if the speed cannot be supported, -EPROTO if the chip ++ * flags cannot be supported, other -ve value on some other error ++ */ ++ int (*xfer)(struct udevice *bus, struct i2c_msg *msg, int nmsgs); ++ ++ /** ++ * probe_chip() - probe for the presense of a chip address ++ * ++ * This function is optional. If omitted, the uclass will send a zero ++ * length message instead. ++ * ++ * @bus: Bus to probe ++ * @chip_addr: Chip address to probe ++ * @chip_flags: Probe flags (enum dm_i2c_chip_flags) ++ * @return 0 if chip was found, -EREMOTEIO if not, -ENOSYS to fall back ++ * to default probem other -ve value on error ++ */ ++ int (*probe_chip)(struct udevice *bus, uint chip_addr, uint chip_flags); ++ ++ /** ++ * set_bus_speed() - set the speed of a bus (optional) ++ * ++ * The bus speed value will be updated by the uclass if this function ++ * does not return an error. This method is optional - if it is not ++ * provided then the driver can read the speed from ++ * bus->uclass_priv->speed_hz ++ * ++ * @bus: Bus to adjust ++ * @speed: Requested speed in Hz ++ * @return 0 if OK, -EINVAL for invalid values ++ */ ++ int (*set_bus_speed)(struct udevice *bus, unsigned int speed); ++ ++ /** ++ * get_bus_speed() - get the speed of a bus (optional) ++ * ++ * Normally this can be provided by the uclass, but if you want your ++ * driver to check the bus speed by looking at the hardware, you can ++ * implement that here. This method is optional. This method would ++ * normally be expected to return bus->uclass_priv->speed_hz. ++ * ++ * @bus: Bus to check ++ * @return speed of selected I2C bus in Hz, -ve on error ++ */ ++ int (*get_bus_speed)(struct udevice *bus); ++ ++ /** ++ * set_flags() - set the flags for a chip (optional) ++ * ++ * This is generally implemented by the uclass, but drivers can ++ * check the value to ensure that unsupported options are not used. ++ * This method is optional. If provided, this method will always be ++ * called when the flags change. ++ * ++ * @dev: Chip to adjust ++ * @flags: New flags value ++ * @return 0 if OK, -EINVAL if value is unsupported ++ */ ++ int (*set_flags)(struct udevice *dev, uint flags); ++ ++ /** ++ * deblock() - recover a bus that is in an unknown state ++ * ++ * I2C is a synchronous protocol and resets of the processor in the ++ * middle of an access can block the I2C Bus until a powerdown of ++ * the full unit is done. This is because slaves can be stuck ++ * waiting for addition bus transitions for a transaction that will ++ * never complete. Resetting the I2C master does not help. The only ++ * way is to force the bus through a series of transitions to make ++ * sure that all slaves are done with the transaction. This method ++ * performs this 'deblocking' if support by the driver. ++ * ++ * This method is optional. ++ */ ++ int (*deblock)(struct udevice *bus); ++}; ++ ++#define i2c_get_ops(dev) ((struct dm_i2c_ops *)(dev)->driver->ops) ++ ++/** ++ * i2c_get_chip() - get a device to use to access a chip on a bus ++ * ++ * This returns the device for the given chip address. The device can then ++ * be used with calls to i2c_read(), i2c_write(), i2c_probe(), etc. ++ * ++ * @bus: Bus to examine ++ * @chip_addr: Chip address for the new device ++ * @devp: Returns pointer to new device if found or -ENODEV if not ++ * found ++ */ ++int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp); ++ ++/** ++ * i2c_get_chip() - get a device to use to access a chip on a bus number ++ * ++ * This returns the device for the given chip address on a particular bus ++ * number. ++ * ++ * @busnum: Bus number to examine ++ * @chip_addr: Chip address for the new device ++ * @devp: Returns pointer to new device if found or -ENODEV if not ++ * found ++ */ ++int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp); ++ ++/** ++ * i2c_chip_ofdata_to_platdata() - Decode standard I2C platform data ++ * ++ * This decodes the chip address from a device tree node and puts it into ++ * its dm_i2c_chip structure. This should be called in your driver's ++ * ofdata_to_platdata() method. ++ * ++ * @blob: Device tree blob ++ * @node: Node offset to read from ++ * @spi: Place to put the decoded information ++ */ ++int i2c_chip_ofdata_to_platdata(const void *blob, int node, ++ struct dm_i2c_chip *chip); ++ ++#endif ++ ++#ifndef CONFIG_DM_I2C ++ ++/* + * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING + * + * The implementation MUST NOT use static or global variables if the +@@ -451,4 +800,7 @@ + * @return 0 if port was reset, -1 if not found + */ + int i2c_reset_port_fdt(const void *blob, int node); ++ ++#endif /* !CONFIG_DM_I2C */ ++ + #endif /* _I2C_H_ */ +diff -ruN u-boot-2015.01-rc3/include/linux/linkage.h u-boot/include/linux/linkage.h +--- u-boot-2015.01-rc3/include/linux/linkage.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/linux/linkage.h 2015-01-01 17:34:32.837493678 +0100 +@@ -17,7 +17,9 @@ + #define CPP_ASMLINKAGE + #endif + ++#ifndef asmlinkage + #define asmlinkage CPP_ASMLINKAGE ++#endif + + #define SYMBOL_NAME_STR(X) #X + #define SYMBOL_NAME(X) X +diff -ruN u-boot-2015.01-rc3/include/linux/string.h u-boot/include/linux/string.h +--- u-boot-2015.01-rc3/include/linux/string.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/linux/string.h 2015-01-01 17:34:32.837493678 +0100 +@@ -30,6 +30,9 @@ + #ifndef __HAVE_ARCH_STRNCPY + extern char * strncpy(char *,const char *, __kernel_size_t); + #endif ++#ifndef __HAVE_ARCH_STRLCPY ++size_t strlcpy(char *, const char *, size_t); ++#endif + #ifndef __HAVE_ARCH_STRCAT + extern char * strcat(char *, const char *); + #endif +diff -ruN u-boot-2015.01-rc3/include/mmc.h u-boot/include/mmc.h +--- u-boot-2015.01-rc3/include/mmc.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/mmc.h 2015-01-01 17:34:32.841493612 +0100 +@@ -31,6 +31,7 @@ + #define MMC_VERSION_4_3 (MMC_VERSION_MMC | 0x403) + #define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429) + #define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405) ++#define MMC_VERSION_5_0 (MMC_VERSION_MMC | 0x500) + + #define MMC_MODE_HS (1 << 0) + #define MMC_MODE_HS_52MHz (1 << 1) +@@ -147,6 +148,7 @@ + * EXT_CSD fields + */ + #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ ++#define EXT_CSD_PARTITION_SETTING 155 /* R/W */ + #define EXT_CSD_PARTITIONS_ATTRIBUTE 156 /* R/W */ + #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */ + #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ +@@ -197,6 +199,8 @@ + #define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2) + #define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x) + ++#define EXT_CSD_PARTITION_SETTING_COMPLETED (1 << 0) ++ + #define R1_ILLEGAL_COMMAND (1 << 22) + #define R1_APP_CMD (1 << 5) + +@@ -314,6 +318,7 @@ + char init_in_progress; /* 1 if we have done mmc_start_init() */ + char preinit; /* start init as early as possible */ + uint op_cond_response; /* the response byte from the last op_cond */ ++ int ddr_mode; + }; + + int mmc_register(struct mmc *mmc); +diff -ruN u-boot-2015.01-rc3/include/part.h u-boot/include/part.h +--- u-boot-2015.01-rc3/include/part.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/part.h 2015-01-01 17:34:32.845493546 +0100 +@@ -244,6 +244,26 @@ + */ + int gpt_restore(block_dev_desc_t *dev_desc, char *str_disk_guid, + disk_partition_t *partitions, const int parts_count); ++ ++/** ++ * is_valid_gpt_buf() - Ensure that the Primary GPT information is valid ++ * ++ * @param dev_desc - block device descriptor ++ * @param buf - buffer which contains the MBR and Primary GPT info ++ * ++ * @return - '0' on success, otherwise error ++ */ ++int is_valid_gpt_buf(block_dev_desc_t *dev_desc, void *buf); ++ ++/** ++ * write_mbr_and_gpt_partitions() - write MBR, Primary GPT and Backup GPT ++ * ++ * @param dev_desc - block device descriptor ++ * @param buf - buffer which contains the MBR and Primary GPT info ++ * ++ * @return - '0' on success, otherwise error ++ */ ++int write_mbr_and_gpt_partitions(block_dev_desc_t *dev_desc, void *buf); + #endif + + #endif /* _PART_H */ +diff -ruN u-boot-2015.01-rc3/include/pci_ids.h u-boot/include/pci_ids.h +--- u-boot-2015.01-rc3/include/pci_ids.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/pci_ids.h 2015-01-01 17:34:32.845493546 +0100 +@@ -2998,6 +2998,14 @@ + #define PCI_DEVICE_ID_INTEL_82454NX 0x84cb + #define PCI_DEVICE_ID_INTEL_84460GX 0x84ea + #define PCI_DEVICE_ID_INTEL_IXP4XX 0x8500 ++#define PCI_DEVICE_ID_INTEL_TCF_GBE 0x8802 ++#define PCI_DEVICE_ID_INTEL_TCF_SDIO_0 0x8809 ++#define PCI_DEVICE_ID_INTEL_TCF_SDIO_1 0x880a ++#define PCI_DEVICE_ID_INTEL_TCF_SATA 0x880b ++#define PCI_DEVICE_ID_INTEL_TCF_UART_0 0x8811 ++#define PCI_DEVICE_ID_INTEL_TCF_UART_1 0x8812 ++#define PCI_DEVICE_ID_INTEL_TCF_UART_2 0x8813 ++#define PCI_DEVICE_ID_INTEL_TCF_UART_3 0x8814 + #define PCI_DEVICE_ID_INTEL_IXP2800 0x9004 + #define PCI_DEVICE_ID_INTEL_S21152BB 0xb152 + +diff -ruN u-boot-2015.01-rc3/include/smsc_lpc47m.h u-boot/include/smsc_lpc47m.h +--- u-boot-2015.01-rc3/include/smsc_lpc47m.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/include/smsc_lpc47m.h 2015-01-01 17:34:32.849493480 +0100 +@@ -0,0 +1,19 @@ ++/* ++ * Copyright (C) 2014, Bin Meng ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef _SMSC_LPC47M_H_ ++#define _SMSC_LPC47M_H_ ++ ++/** ++ * Configure the base I/O port of the specified serial device and enable the ++ * serial device. ++ * ++ * @dev: High 8 bits = Super I/O port, low 8 bits = logical device number. ++ * @iobase: Processor I/O port address to assign to this serial device. ++ */ ++void lpc47m_enable_serial(u16 dev, u16 iobase); ++ ++#endif /* _SMSC_LPC47M_H_ */ +diff -ruN u-boot-2015.01-rc3/include/spi.h u-boot/include/spi.h +--- u-boot-2015.01-rc3/include/spi.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/spi.h 2015-01-01 17:34:32.849493480 +0100 +@@ -34,6 +34,7 @@ + + /* SPI TX operation modes */ + #define SPI_OPM_TX_QPP (1 << 0) ++#define SPI_OPM_TX_BP (1 << 1) + + /* SPI RX operation modes */ + #define SPI_OPM_RX_AS (1 << 0) +diff -ruN u-boot-2015.01-rc3/include/tps6586x.h u-boot/include/tps6586x.h +--- u-boot-2015.01-rc3/include/tps6586x.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/tps6586x.h 2015-01-01 17:34:32.849493480 +0100 +@@ -44,9 +44,9 @@ + * Set up the TPS6586X I2C bus number. This will be used for all operations + * on the device. This function must be called before using other functions. + * +- * @param bus I2C bus number containing the TPS6586X chip ++ * @param bus I2C bus containing the TPS6586X chip + * @return 0 (always succeeds) + */ +-int tps6586x_init(int bus); ++int tps6586x_init(struct udevice *bus); + + #endif /* _TPS6586X_H_ */ +diff -ruN u-boot-2015.01-rc3/include/usb/ehci-fsl.h u-boot/include/usb/ehci-fsl.h +--- u-boot-2015.01-rc3/include/usb/ehci-fsl.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/include/usb/ehci-fsl.h 2015-01-01 17:34:32.853493416 +0100 +@@ -280,7 +280,9 @@ + #define MXC_EHCI_IPPUE_DOWN (1 << 10) + #define MXC_EHCI_IPPUE_UP (1 << 11) + ++int usb_phy_mode(int port); + /* Board-specific initialization */ + int board_ehci_hcd_init(int port); ++int board_usb_phy_mode(int port); + + #endif /* _EHCI_FSL_H */ +diff -ruN u-boot-2015.01-rc3/lib/asm-offsets.c u-boot/lib/asm-offsets.c +--- u-boot-2015.01-rc3/lib/asm-offsets.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/lib/asm-offsets.c 2015-01-01 17:34:32.857493350 +0100 +@@ -31,9 +31,6 @@ + #ifdef CONFIG_SYS_MALLOC_F_LEN + DEFINE(GD_MALLOC_BASE, offsetof(struct global_data, malloc_base)); + #endif +-#ifdef CONFIG_X86 +- DEFINE(GD_BIST, offsetof(struct global_data, arch.bist)); +-#endif + + #if defined(CONFIG_ARM) + +diff -ruN u-boot-2015.01-rc3/lib/errno_str.c u-boot/lib/errno_str.c +--- u-boot-2015.01-rc3/lib/errno_str.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/lib/errno_str.c 2015-01-01 17:34:32.857493350 +0100 +@@ -0,0 +1,147 @@ ++/* ++ * Copyright (C) 2014 Samsung Electronics ++ * Przemyslaw Marczak ++ * ++ * SDPX-License-Identifier: GPL-2.0+ ++ */ ++#include ++#include ++ ++#define ERRNO_MSG(errno, msg) msg ++#define SAME_AS(x) (const char *)&errno_message[x] ++ ++static const char * const errno_message[] = { ++ ERRNO_MSG(0, "Success"), ++ ERRNO_MSG(EPERM, "Operation not permitted"), ++ ERRNO_MSG(ENOEN, "No such file or directory"), ++ ERRNO_MSG(ESRCH, "No such process"), ++ ERRNO_MSG(EINTR, "Interrupted system call"), ++ ERRNO_MSG(EIO, "I/O error"), ++ ERRNO_MSG(ENXIO, "No such device or address"), ++ ERRNO_MSG(E2BIG, "Argument list too long"), ++ ERRNO_MSG(ENOEXEC, "Exec format error"), ++ ERRNO_MSG(EBADF, "Bad file number"), ++ ERRNO_MSG(ECHILD, "No child processes"), ++ ERRNO_MSG(EAGAIN, "Try again"), ++ ERRNO_MSG(ENOMEM, "Out of memory"), ++ ERRNO_MSG(EACCES, "Permission denied"), ++ ERRNO_MSG(EFAULT, "Bad address"), ++ ERRNO_MSG(ENOTBL, "Block device required"), ++ ERRNO_MSG(EBUSY, "Device or resource busy"), ++ ERRNO_MSG(EEXIST, "File exists"), ++ ERRNO_MSG(EXDEV, "Cross-device link"), ++ ERRNO_MSG(ENODEV, "No such device"), ++ ERRNO_MSG(ENOTDIR, "Not a directory"), ++ ERRNO_MSG(EISDIR, "Is a directory"), ++ ERRNO_MSG(EINVAL, "Invalid argument"), ++ ERRNO_MSG(ENFILE, "File table overflow"), ++ ERRNO_MSG(EMFILE, "Too many open files"), ++ ERRNO_MSG(ENOTTY, "Not a typewriter"), ++ ERRNO_MSG(ETXTBSY, "Text file busy"), ++ ERRNO_MSG(EFBIG, "File too large"), ++ ERRNO_MSG(ENOSPC, "No space left on device"), ++ ERRNO_MSG(ESPIPE, "Illegal seek"), ++ ERRNO_MSG(EROFS, "Read-only file system"), ++ ERRNO_MSG(EMLINK, "Too many links"), ++ ERRNO_MSG(EPIPE, "Broken pipe"), ++ ERRNO_MSG(EDOM, "Math argument out of domain of func"), ++ ERRNO_MSG(ERANGE, "Math result not representable"), ++ ERRNO_MSG(EDEADLK, "Resource deadlock would occur"), ++ ERRNO_MSG(ENAMETOOLONG, "File name too long"), ++ ERRNO_MSG(ENOLCK, "No record locks available"), ++ ERRNO_MSG(ENOSYS, "Function not implemented"), ++ ERRNO_MSG(ENOTEMPTY, "Directory not empty"), ++ ERRNO_MSG(ELOOP, "Too many symbolic links encountered"), ++ ERRNO_MSG(EWOULDBLOCK, SAME_AS(EAGAIN)), ++ ERRNO_MSG(ENOMSG, "No message of desired type"), ++ ERRNO_MSG(EIDRM, "Identifier removed"), ++ ERRNO_MSG(ECHRNG, "Channel number out of range"), ++ ERRNO_MSG(EL2NSYNC, "Level 2 not synchronized"), ++ ERRNO_MSG(EL3HLT, "Level 3 halted"), ++ ERRNO_MSG(EL3RST, "Level 3 reset"), ++ ERRNO_MSG(ELNRNG, "Link number out of range"), ++ ERRNO_MSG(EUNATCH, "Protocol driver not attached"), ++ ERRNO_MSG(ENOCSI, "No CSI structure available"), ++ ERRNO_MSG(EL2HLT, "Level 2 halted"), ++ ERRNO_MSG(EBADE, "Invalid exchange"), ++ ERRNO_MSG(EBADR, "Invalid request descriptor"), ++ ERRNO_MSG(EXFULL, "Exchange full"), ++ ERRNO_MSG(ENOANO, "No anode"), ++ ERRNO_MSG(EBADRQC, "Invalid request code"), ++ ERRNO_MSG(EBADSLT, "Invalid slot"), ++ ERRNO_MSG(EDEADLOCK, SAME_AS(EDEADLK)), ++ ERRNO_MSG(EBFONT, "Bad font file format"), ++ ERRNO_MSG(ENOSTR, "Device not a stream"), ++ ERRNO_MSG(ENODATA, "No data available"), ++ ERRNO_MSG(ETIME, "Timer expired"), ++ ERRNO_MSG(ENOSR, "Out of streams resources"), ++ ERRNO_MSG(ENONET, "Machine is not on the network"), ++ ERRNO_MSG(ENOPKG, "Package not installed"), ++ ERRNO_MSG(EREMOTE, "Object is remote"), ++ ERRNO_MSG(ENOLINK, "Link has been severed"), ++ ERRNO_MSG(EADV, "Advertise error"), ++ ERRNO_MSG(ESRMNT, "Srmount error"), ++ ERRNO_MSG(ECOMM, "Communication error on send"), ++ ERRNO_MSG(EPROTO, "Protocol error"), ++ ERRNO_MSG(EMULTIHOP, "Multihop attempted"), ++ ERRNO_MSG(EDOTDOT, "RFS specific error"), ++ ERRNO_MSG(EBADMSG, "Not a data message"), ++ ERRNO_MSG(EOVERFLOW, "Value too large for defined data type"), ++ ERRNO_MSG(ENOTUNIQ, "Name not unique on network"), ++ ERRNO_MSG(EBADFD, "File descriptor in bad state"), ++ ERRNO_MSG(EREMCHG, "Remote address changed"), ++ ERRNO_MSG(ELIBACC, "Can not access a needed shared library"), ++ ERRNO_MSG(ELIBBAD, "Accessing a corrupted shared library"), ++ ERRNO_MSG(ELIBSCN, ".lib section in a.out corrupted"), ++ ERRNO_MSG(ELIBMAX, "Attempting to link in too many shared libraries"), ++ ERRNO_MSG(ELIBEXEC, "Cannot exec a shared library directly"), ++ ERRNO_MSG(EILSEQ, "Illegal byte sequence"), ++ ERRNO_MSG(ERESTART, "Interrupted system call should be restarted"), ++ ERRNO_MSG(ESTRPIPE, "Streams pipe error"), ++ ERRNO_MSG(EUSERS, "Too many users"), ++ ERRNO_MSG(ENOTSOCK, "Socket operation on non-socket"), ++ ERRNO_MSG(EDESTADDRREQ, "Destination address required"), ++ ERRNO_MSG(EMSGSIZE, "Message too long"), ++ ERRNO_MSG(EPROTOTYPE, "Protocol wrong type for socket"), ++ ERRNO_MSG(ENOPROTOOPT, "Protocol not available"), ++ ERRNO_MSG(EPROTONOSUPPORT, "Protocol not supported"), ++ ERRNO_MSG(ESOCKTNOSUPPORT, "Socket type not supported"), ++ ERRNO_MSG(EOPNOTSUPP, "Operation not supported on transport endpoint"), ++ ERRNO_MSG(EPFNOSUPPORT, "Protocol family not supported"), ++ ERRNO_MSG(AFNOSUPPORT, "Address family not supported by protocol"), ++ ERRNO_MSG(EADDRINUSE, "Address already in use"), ++ ERRNO_MSG(EADDRNOTAVAIL, "Cannot assign requested address"), ++ ERRNO_MSG(ENETDOWN, "Network is down"), ++ ERRNO_MSG(ENETUNREACH, "Network is unreachable"), ++ ERRNO_MSG(ENETRESET, "Network dropped connection because of reset"), ++ ERRNO_MSG(ECONNABORTED, "Software caused connection abort"), ++ ERRNO_MSG(ECONNRESET, "Connection reset by peer"), ++ ERRNO_MSG(ENOBUFS, "No buffer space available"), ++ ERRNO_MSG(EISCONN, "Transport endpoint is already connected"), ++ ERRNO_MSG(ENOTCONN, "Transport endpoint is not connected"), ++ ERRNO_MSG(ESHUTDOWN, "Cannot send after transport endpoint shutdown"), ++ ERRNO_MSG(ETOOMANYREFS, "Too many references: cannot splice"), ++ ERRNO_MSG(ETIMEDOUT, "Connection timed out"), ++ ERRNO_MSG(ECONNREFUSED, "Connection refused"), ++ ERRNO_MSG(EHOSTDOWN, "Host is down"), ++ ERRNO_MSG(EHOSTUNREACH, "No route to host"), ++ ERRNO_MSG(EALREADY, "Operation already in progress"), ++ ERRNO_MSG(EINPROGRESS, "Operation now in progress"), ++ ERRNO_MSG(ESTALE, "Stale NFS file handle"), ++ ERRNO_MSG(EUCLEAN, "Structure needs cleaning"), ++ ERRNO_MSG(ENOTNAM, "Not a XENIX named type file"), ++ ERRNO_MSG(ENAVAIL, "No XENIX semaphores available"), ++ ERRNO_MSG(EISNAM, "Is a named type file"), ++ ERRNO_MSG(EREMOTEIO, "Remote I/O error"), ++ ERRNO_MSG(EDQUOT, "Quota exceeded"), ++ ERRNO_MSG(ENOMEDIUM, "No medium found"), ++ ERRNO_MSG(EMEDIUMTYPE, "Wrong medium type"), ++}; ++ ++const char *errno_str(int errno) ++{ ++ if (errno >= 0) ++ return errno_message[0]; ++ ++ return errno_message[abs(errno)]; ++} +diff -ruN u-boot-2015.01-rc3/lib/initcall.c u-boot/lib/initcall.c +--- u-boot-2015.01-rc3/lib/initcall.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/lib/initcall.c 2015-01-01 17:34:32.861493284 +0100 +@@ -19,7 +19,11 @@ + + if (gd->flags & GD_FLG_RELOC) + reloc_ofs = gd->reloc_off; +- debug("initcall: %p\n", (char *)*init_fnc_ptr - reloc_ofs); ++ debug("initcall: %p", (char *)*init_fnc_ptr - reloc_ofs); ++ if (gd->flags & GD_FLG_RELOC) ++ debug(" (relocated to %p)\n", (char *)*init_fnc_ptr); ++ else ++ debug("\n"); + ret = (*init_fnc_ptr)(); + if (ret) { + printf("initcall sequence %p failed at call %p (err=%d)\n", +diff -ruN u-boot-2015.01-rc3/lib/Makefile u-boot/lib/Makefile +--- u-boot-2015.01-rc3/lib/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/lib/Makefile 2015-01-01 17:34:32.857493350 +0100 +@@ -51,6 +51,7 @@ + obj-$(CONFIG_ADDR_MAP) += addr_map.o + obj-y += hashtable.o + obj-y += errno.o ++obj-$(CONFIG_ERRNO_STR) += errno_str.o + obj-y += display_options.o + obj-$(CONFIG_BCH) += bch.o + obj-y += crc32.o +diff -ruN u-boot-2015.01-rc3/lib/string.c u-boot/lib/string.c +--- u-boot-2015.01-rc3/lib/string.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/lib/string.c 2015-01-01 17:34:32.861493284 +0100 +@@ -102,6 +102,31 @@ + } + #endif + ++#ifndef __HAVE_ARCH_STRLCPY ++/** ++ * strlcpy - Copy a C-string into a sized buffer ++ * @dest: Where to copy the string to ++ * @src: Where to copy the string from ++ * @size: size of destination buffer ++ * ++ * Compatible with *BSD: the result is always a valid ++ * NUL-terminated string that fits in the buffer (unless, ++ * of course, the buffer size is zero). It does not pad ++ * out the result like strncpy() does. ++ */ ++size_t strlcpy(char *dest, const char *src, size_t size) ++{ ++ size_t ret = strlen(src); ++ ++ if (size) { ++ size_t len = (ret >= size) ? size - 1 : ret; ++ memcpy(dest, src, len); ++ dest[len] = '\0'; ++ } ++ return ret; ++} ++#endif ++ + #ifndef __HAVE_ARCH_STRCAT + /** + * strcat - Append one %NUL-terminated string to another +diff -ruN u-boot-2015.01-rc3/MAINTAINERS u-boot/MAINTAINERS +--- u-boot-2015.01-rc3/MAINTAINERS 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/MAINTAINERS 2015-01-01 17:34:31.981507711 +0100 +@@ -128,6 +128,12 @@ + F: arch/arm/cpu/arm926ejs/spear/ + F: arch/arm/include/asm/arch-spear/ + ++ARM STM STV0991 ++M: Vikas Manocha ++S: Maintained ++F: arch/arm/cpu/armv7/stv0991/ ++F: arch/arm/include/asm/arch-stv0991/ ++ + ARM SUNXI + M: Ian Campbell + M: Hans De Goede +diff -ruN u-boot-2015.01-rc3/Makefile u-boot/Makefile +--- u-boot-2015.01-rc3/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/Makefile 2015-01-01 17:34:31.981507711 +0100 +@@ -1,7 +1,7 @@ + VERSION = 2015 + PATCHLEVEL = 01 + SUBLEVEL = +-EXTRAVERSION = -rc3 ++EXTRAVERSION = -rc4 + NAME = + + # *DOCUMENTATION* +@@ -946,27 +946,43 @@ + ifneq ($(CONFIG_X86_RESET_VECTOR),) + rom: u-boot.rom FORCE + +-u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin \ +- $(srctree)/board/$(BOARDDIR)/mrc.bin +- $(objtree)/tools/ifdtool -c -r $(CONFIG_ROM_SIZE) u-boot.tmp +- if [ -n "$(CONFIG_HAVE_INTEL_ME)" ]; then \ +- $(objtree)/tools/ifdtool -D \ +- $(srctree)/board/$(BOARDDIR)/descriptor.bin u-boot.tmp; \ +- $(objtree)/tools/ifdtool \ +- -i ME:$(srctree)/board/$(BOARDDIR)/me.bin u-boot.tmp; \ +- fi +- $(objtree)/tools/ifdtool -w \ +- $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-dtb.bin u-boot.tmp +- $(objtree)/tools/ifdtool -w \ +- $(CONFIG_X86_MRC_START):$(srctree)/board/$(BOARDDIR)/mrc.bin \ +- u-boot.tmp +- $(objtree)/tools/ifdtool -w \ +- $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin \ +- u-boot.tmp +- $(objtree)/tools/ifdtool -w \ +- $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILENAME) \ +- u-boot.tmp +- mv u-boot.tmp $@ ++IFDTOOL=$(objtree)/tools/ifdtool ++IFDTOOL_FLAGS = -f 0:$(objtree)/u-boot.dtb ++IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1) ++IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot.bin ++IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin ++ ++ifneq ($(CONFIG_HAVE_INTEL_ME),) ++IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin ++IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin ++endif ++ ++ifneq ($(CONFIG_HAVE_MRC),) ++IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin ++endif ++ ++ifneq ($(CONFIG_HAVE_FSP),) ++IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE) ++endif ++ ++ifneq ($(CONFIG_HAVE_CMC),) ++IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE) ++endif ++ ++ifneq ($(CONFIG_X86_OPTION_ROM_ADDR),) ++IFDTOOL_FLAGS += -w $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILE) ++endif ++ ++quiet_cmd_ifdtool = IFDTOOL $@ ++cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp; ++ifneq ($(CONFIG_HAVE_INTEL_ME),) ++cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp; ++endif ++cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp; ++cmd_ifdtool += mv u-boot.tmp $@ ++ ++u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin ++ $(call if_changed,ifdtool) + + OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec + u-boot-x86-16bit.bin: u-boot FORCE +@@ -999,15 +1015,22 @@ + #concatenated with u-boot binary. It is need by PowerPC SoC having + #internal SRAM <= 512KB. + MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ +- -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage ++ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \ ++ -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE) + + spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE + $(call if_changed,mkimage) + ++ifeq ($(ARCH),arm) ++UBOOT_BINLOAD := u-boot.img ++else ++UBOOT_BINLOAD := u-boot.bin ++endif ++ + OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ + --gap-fill=0xff + +-u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE ++u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE + $(call if_changed,pad_cat) + + # PPC4xx needs the SPL at the end of the image, since the reset vector +diff -ruN u-boot-2015.01-rc3/README u-boot/README +--- u-boot-2015.01-rc3/README 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/README 2015-01-01 17:34:31.985507645 +0100 +@@ -1773,6 +1773,15 @@ + regarding the non-volatile storage device. Define this to + the eMMC device that fastboot should use to store the image. + ++ CONFIG_FASTBOOT_GPT_NAME ++ The fastboot "flash" command supports writing the downloaded ++ image to the Protective MBR and the Primary GUID Partition ++ Table. (Additionally, this downloaded image is post-processed ++ to generate and write the Backup GUID Partition Table.) ++ This occurs when the specified "partition name" on the ++ "fastboot flash" command line matches this value. ++ Default is GPT_ENTRY_NAME (currently "gpt") if undefined. ++ + - Journaling Flash filesystem support: + CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, + CONFIG_JFFS2_NAND_DEV +diff -ruN u-boot-2015.01-rc3/scripts/binutils-version.sh u-boot/scripts/binutils-version.sh +--- u-boot-2015.01-rc3/scripts/binutils-version.sh 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/scripts/binutils-version.sh 2015-01-01 17:34:32.877493022 +0100 +@@ -14,7 +14,9 @@ + exit 1 + fi + +-MAJOR=$($gas --version | head -1 | awk '{print $NF}' | cut -d . -f 1) +-MINOR=$($gas --version | head -1 | awk '{print $NF}' | cut -d . -f 2) ++version_string=$($gas --version | head -1 | sed -e 's/.*) *\([0-9.]*\).*/\1/' ) ++ ++MAJOR=$(echo $version_string | cut -d . -f 1) ++MINOR=$(echo $version_string | cut -d . -f 2) + + printf "%02d%02d\\n" $MAJOR $MINOR +diff -ruN u-boot-2015.01-rc3/snapshot.commit u-boot/snapshot.commit +--- u-boot-2015.01-rc3/snapshot.commit 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/snapshot.commit 2015-01-01 17:34:32.885492891 +0100 +@@ -1 +1 @@ +-32fdf0e4d82bdca5d64d86330e461e59685f9959 Mon, 8 Dec 2014 16:35:08 -0500 ++$Format:%H %cD$ +diff -ruN u-boot-2015.01-rc3/test/dm/cmd_dm.c u-boot/test/dm/cmd_dm.c +--- u-boot-2015.01-rc3/test/dm/cmd_dm.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/test/dm/cmd_dm.c 2015-01-01 17:34:32.885492891 +0100 +@@ -16,17 +16,65 @@ + #include + #include + ++static void show_devices(struct udevice *dev, int depth, int last_flag) ++{ ++ int i, is_last; ++ struct udevice *child; ++ char class_name[12]; ++ ++ /* print the first 11 characters to not break the tree-format. */ ++ strlcpy(class_name, dev->uclass->uc_drv->name, sizeof(class_name)); ++ printf(" %-11s [ %c ] ", class_name, ++ dev->flags & DM_FLAG_ACTIVATED ? '+' : ' '); ++ ++ for (i = depth; i >= 0; i--) { ++ is_last = (last_flag >> i) & 1; ++ if (i) { ++ if (is_last) ++ printf(" "); ++ else ++ printf("| "); ++ } else { ++ if (is_last) ++ printf("`-- "); ++ else ++ printf("|-- "); ++ } ++ } ++ ++ printf("%s\n", dev->name); ++ ++ list_for_each_entry(child, &dev->child_head, sibling_node) { ++ is_last = list_is_last(&child->sibling_node, &dev->child_head); ++ show_devices(child, depth + 1, (last_flag << 1) | is_last); ++ } ++} ++ ++static int do_dm_dump_all(cmd_tbl_t *cmdtp, int flag, int argc, ++ char * const argv[]) ++{ ++ struct udevice *root; ++ ++ root = dm_root(); ++ if (root) { ++ printf(" Class Probed Name\n"); ++ printf("----------------------------------------\n"); ++ show_devices(root, -1, 0); ++ } ++ ++ return 0; ++} ++ + /** + * dm_display_line() - Display information about a single device + * + * Displays a single line of information with an option prefix + * + * @dev: Device to display +- * @buf: Prefix to display at the start of the line + */ +-static void dm_display_line(struct udevice *dev, char *buf) ++static void dm_display_line(struct udevice *dev) + { +- printf("%s- %c %s @ %08lx", buf, ++ printf("- %c %s @ %08lx", + dev->flags & DM_FLAG_ACTIVATED ? '*' : ' ', + dev->name, (ulong)map_to_sysmem(dev)); + if (dev->req_seq != -1) +@@ -34,53 +82,6 @@ + puts("\n"); + } + +-static int display_succ(struct udevice *in, char *buf) +-{ +- int len; +- int ip = 0; +- char local[16]; +- struct udevice *pos, *n, *prev = NULL; +- +- dm_display_line(in, buf); +- +- if (list_empty(&in->child_head)) +- return 0; +- +- len = strlen(buf); +- strncpy(local, buf, sizeof(local)); +- snprintf(local + len, 2, "|"); +- if (len && local[len - 1] == '`') +- local[len - 1] = ' '; +- +- list_for_each_entry_safe(pos, n, &in->child_head, sibling_node) { +- if (ip++) +- display_succ(prev, local); +- prev = pos; +- } +- +- snprintf(local + len, 2, "`"); +- display_succ(prev, local); +- +- return 0; +-} +- +-static int dm_dump(struct udevice *dev) +-{ +- if (!dev) +- return -EINVAL; +- return display_succ(dev, ""); +-} +- +-static int do_dm_dump_all(cmd_tbl_t *cmdtp, int flag, int argc, +- char * const argv[]) +-{ +- struct udevice *root; +- +- root = dm_root(); +- printf("ROOT %08lx\n", (ulong)map_to_sysmem(root)); +- return dm_dump(root); +-} +- + static int do_dm_dump_uclass(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) + { +@@ -99,7 +100,7 @@ + if (list_empty(&uc->dev_head)) + continue; + list_for_each_entry(dev, &uc->dev_head, uclass_node) { +- dm_display_line(dev, ""); ++ dm_display_line(dev); + } + puts("\n"); + } +diff -ruN u-boot-2015.01-rc3/test/dm/i2c.c u-boot/test/dm/i2c.c +--- u-boot-2015.01-rc3/test/dm/i2c.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/test/dm/i2c.c 2015-01-01 17:34:32.885492891 +0100 +@@ -0,0 +1,216 @@ ++/* ++ * Copyright (C) 2013 Google, Inc ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ * ++ * Note: Test coverage does not include 10-bit addressing ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static const int busnum; ++static const int chip = 0x2c; ++ ++/* Test that we can find buses and chips */ ++static int dm_test_i2c_find(struct dm_test_state *dms) ++{ ++ struct udevice *bus, *dev; ++ const int no_chip = 0x10; ++ ++ ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_I2C, busnum, ++ false, &bus)); ++ ++ /* ++ * i2c_post_bind() will bind devices to chip selects. Check this then ++ * remove the emulation and the slave device. ++ */ ++ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); ++ ut_assertok(i2c_probe(bus, chip, 0, &dev)); ++ ut_asserteq(-ENODEV, i2c_probe(bus, no_chip, 0, &dev)); ++ ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_I2C, 1, &bus)); ++ ++ return 0; ++} ++DM_TEST(dm_test_i2c_find, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); ++ ++static int dm_test_i2c_read_write(struct dm_test_state *dms) ++{ ++ struct udevice *bus, *dev; ++ uint8_t buf[5]; ++ ++ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); ++ ut_assertok(i2c_get_chip(bus, chip, &dev)); ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf))); ++ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2)); ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ut_assertok(memcmp(buf, "\0\0AB\0", sizeof(buf))); ++ ++ return 0; ++} ++DM_TEST(dm_test_i2c_read_write, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); ++ ++static int dm_test_i2c_speed(struct dm_test_state *dms) ++{ ++ struct udevice *bus, *dev; ++ uint8_t buf[5]; ++ ++ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); ++ ut_assertok(i2c_get_chip(bus, chip, &dev)); ++ ut_assertok(i2c_set_bus_speed(bus, 100000)); ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ut_assertok(i2c_set_bus_speed(bus, 400000)); ++ ut_asserteq(400000, i2c_get_bus_speed(bus)); ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ut_asserteq(-EINVAL, i2c_write(dev, 0, buf, 5)); ++ ++ return 0; ++} ++DM_TEST(dm_test_i2c_speed, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); ++ ++static int dm_test_i2c_offset_len(struct dm_test_state *dms) ++{ ++ struct udevice *bus, *dev; ++ uint8_t buf[5]; ++ ++ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); ++ ut_assertok(i2c_get_chip(bus, chip, &dev)); ++ ut_assertok(i2c_set_chip_offset_len(dev, 1)); ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ++ /* This is not supported by the uclass */ ++ ut_asserteq(-EINVAL, i2c_set_chip_offset_len(dev, 5)); ++ ++ return 0; ++} ++DM_TEST(dm_test_i2c_offset_len, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); ++ ++static int dm_test_i2c_probe_empty(struct dm_test_state *dms) ++{ ++ struct udevice *bus, *dev; ++ ++ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); ++ ut_assertok(i2c_probe(bus, SANDBOX_I2C_TEST_ADDR, 0, &dev)); ++ ++ return 0; ++} ++DM_TEST(dm_test_i2c_probe_empty, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); ++ ++static int dm_test_i2c_bytewise(struct dm_test_state *dms) ++{ ++ struct udevice *bus, *dev; ++ struct udevice *eeprom; ++ uint8_t buf[5]; ++ ++ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); ++ ut_assertok(i2c_get_chip(bus, chip, &dev)); ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf))); ++ ++ /* Tell the EEPROM to only read/write one register at a time */ ++ ut_assertok(uclass_first_device(UCLASS_I2C_EMUL, &eeprom)); ++ ut_assertnonnull(eeprom); ++ sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_SINGLE_BYTE); ++ ++ /* Now we only get the first byte - the rest will be 0xff */ ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf))); ++ ++ /* If we do a separate transaction for each byte, it works */ ++ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS)); ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf))); ++ ++ /* This will only write A */ ++ ut_assertok(i2c_set_chip_flags(dev, 0)); ++ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2)); ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf))); ++ ++ /* Check that the B was ignored */ ++ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS)); ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ut_assertok(memcmp(buf, "\0\0A\0\0\0", sizeof(buf))); ++ ++ /* Now write it again with the new flags, it should work */ ++ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS)); ++ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2)); ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf))); ++ ++ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS | ++ DM_I2C_CHIP_RD_ADDRESS)); ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ut_assertok(memcmp(buf, "\0\0AB\0\0", sizeof(buf))); ++ ++ /* Restore defaults */ ++ sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_NONE); ++ ut_assertok(i2c_set_chip_flags(dev, 0)); ++ ++ return 0; ++} ++DM_TEST(dm_test_i2c_bytewise, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); ++ ++static int dm_test_i2c_offset(struct dm_test_state *dms) ++{ ++ struct udevice *eeprom; ++ struct udevice *dev; ++ uint8_t buf[5]; ++ ++ ut_assertok(i2c_get_chip_for_busnum(busnum, chip, &dev)); ++ ++ /* Do a transfer so we can find the emulator */ ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ut_assertok(uclass_first_device(UCLASS_I2C_EMUL, &eeprom)); ++ ++ /* Offset length 0 */ ++ sandbox_i2c_eeprom_set_offset_len(eeprom, 0); ++ ut_assertok(i2c_set_chip_offset_len(dev, 0)); ++ ut_assertok(i2c_write(dev, 10 /* ignored */, (uint8_t *)"AB", 2)); ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ut_assertok(memcmp(buf, "AB\0\0\0\0", sizeof(buf))); ++ ++ /* Offset length 1 */ ++ sandbox_i2c_eeprom_set_offset_len(eeprom, 1); ++ ut_assertok(i2c_set_chip_offset_len(dev, 1)); ++ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2)); ++ ut_assertok(i2c_read(dev, 0, buf, 5)); ++ ut_assertok(memcmp(buf, "ABAB\0", sizeof(buf))); ++ ++ /* Offset length 2 */ ++ sandbox_i2c_eeprom_set_offset_len(eeprom, 2); ++ ut_assertok(i2c_set_chip_offset_len(dev, 2)); ++ ut_assertok(i2c_write(dev, 0x210, (uint8_t *)"AB", 2)); ++ ut_assertok(i2c_read(dev, 0x210, buf, 5)); ++ ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf))); ++ ++ /* Offset length 3 */ ++ sandbox_i2c_eeprom_set_offset_len(eeprom, 2); ++ ut_assertok(i2c_set_chip_offset_len(dev, 2)); ++ ut_assertok(i2c_write(dev, 0x410, (uint8_t *)"AB", 2)); ++ ut_assertok(i2c_read(dev, 0x410, buf, 5)); ++ ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf))); ++ ++ /* Offset length 4 */ ++ sandbox_i2c_eeprom_set_offset_len(eeprom, 2); ++ ut_assertok(i2c_set_chip_offset_len(dev, 2)); ++ ut_assertok(i2c_write(dev, 0x420, (uint8_t *)"AB", 2)); ++ ut_assertok(i2c_read(dev, 0x420, buf, 5)); ++ ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf))); ++ ++ /* Restore defaults */ ++ sandbox_i2c_eeprom_set_offset_len(eeprom, 1); ++ ++ return 0; ++} ++DM_TEST(dm_test_i2c_offset, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); +diff -ruN u-boot-2015.01-rc3/test/dm/Makefile u-boot/test/dm/Makefile +--- u-boot-2015.01-rc3/test/dm/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/test/dm/Makefile 2015-01-01 17:34:32.885492891 +0100 +@@ -20,4 +20,5 @@ + obj-$(CONFIG_DM_GPIO) += gpio.o + obj-$(CONFIG_DM_SPI) += spi.o + obj-$(CONFIG_DM_SPI_FLASH) += sf.o ++obj-$(CONFIG_DM_I2C) += i2c.o + endif +diff -ruN u-boot-2015.01-rc3/test/dm/test.dts u-boot/test/dm/test.dts +--- u-boot-2015.01-rc3/test/dm/test.dts 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/test/dm/test.dts 2015-01-01 17:34:32.885492891 +0100 +@@ -93,6 +93,23 @@ + num-gpios = <10>; + }; + ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ compatible = "sandbox,i2c"; ++ clock-frequency = <100000>; ++ eeprom@2c { ++ reg = <0x2c>; ++ compatible = "i2c-eeprom"; ++ emul { ++ compatible = "sandbox,i2c-eeprom"; ++ sandbox,filename = "i2c.bin"; ++ sandbox,size = <256>; ++ }; ++ }; ++ }; ++ + spi@0 { + #address-cells = <1>; + #size-cells = <0>; +diff -ruN u-boot-2015.01-rc3/test/ums/ums_gadget_test.sh u-boot/test/ums/ums_gadget_test.sh +--- u-boot-2015.01-rc3/test/ums/ums_gadget_test.sh 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/test/ums/ums_gadget_test.sh 2015-01-01 17:34:32.885492891 +0100 +@@ -11,6 +11,7 @@ + + COLOUR_RED="\33[31m" + COLOUR_GREEN="\33[32m" ++COLOUR_ORANGE="\33[33m" + COLOUR_DEFAULT="\33[0m" + + DIR=./ +@@ -59,8 +60,15 @@ + fi + + cp ./$1 $MNT_DIR +- umount $MNT_DIR + ++ while true; do ++ umount $MNT_DIR > /dev/null 2>&1 ++ if [ $? -eq 0 ]; then ++ break ++ fi ++ printf "$COLOUR_ORANGE\tSleeping to wait for umount...$COLOUR_DEFAULT\n" ++ sleep 1 ++ done + + echo -n "TX: " + calculate_md5sum $1 +diff -ruN u-boot-2015.01-rc3/tools/buildman/README u-boot/tools/buildman/README +--- u-boot-2015.01-rc3/tools/buildman/README 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/tools/buildman/README 2015-01-01 17:34:32.885492891 +0100 +@@ -42,7 +42,7 @@ + Buildman is a builder. It is not make, although it runs make. It does not + produce any useful output on the terminal while building, except for + progress information (except with -v, see below). All the output (errors, +-warnings and binaries if you are ask for them) is stored in output ++warnings and binaries if you ask for them) is stored in output + directories, which you can look at while the build is progressing, or when + it is finished. + +@@ -121,7 +121,7 @@ + means to build all arm boards except nvidia, freescale and anything ending + with 'ball'. + +-It is convenient to use the -n option to see whaat will be built based on ++It is convenient to use the -n option to see what will be built based on + the subset given. + + Buildman does not store intermediate object files. It optionally copies +@@ -371,7 +371,7 @@ + + + To find out how the build went, ask for a summary with -s. You can do this +-either before the build completes (presumably in another terminal) or or ++either before the build completes (presumably in another terminal) or + afterwards. Let's work through an example of how this is used: + + $ ./tools/buildman/buildman -b lcd9b -s +@@ -439,7 +439,7 @@ + + At commit 16, the error moves - you can see that the old error at line 120 + is fixed, but there is a new one at line 126. This is probably only because +-we added some code and moved the broken line father down the file. ++we added some code and moved the broken line further down the file. + + If many boards have the same error, then -e will display the error only + once. This makes the output as concise as possible. To see which boards have +@@ -647,8 +647,8 @@ + board was built) and by 96 bytes for powerpc. This increase was offset in both + cases by reductions in rodata and data/bss. + +-Shown below the summary lines is the sizes for each board. Below each board +-is the sizes for each function. This information starts with: ++Shown below the summary lines are the sizes for each board. Below each board ++are the sizes for each function. This information starts with: + + add - number of functions added / removed + grow - number of functions which grew / shrunk +@@ -817,7 +817,7 @@ + This has mostly be written in my spare time as a response to my difficulties + in testing large series of patches. Apart from tidying up there is quite a + bit of scope for improvement. Things like better error diffs and easier +-access to log files. Also it would be nice it buildman could 'hunt' for ++access to log files. Also it would be nice if buildman could 'hunt' for + problems, perhaps by building a few boards for each arch, or checking + commits for changed files and building only boards which use those files. + +diff -ruN u-boot-2015.01-rc3/tools/ifdtool.c u-boot/tools/ifdtool.c +--- u-boot-2015.01-rc3/tools/ifdtool.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/tools/ifdtool.c 2015-01-01 17:34:32.893492759 +0100 +@@ -18,6 +18,7 @@ + #include + #include + #include ++#include + #include "ifdtool.h" + + #undef DEBUG +@@ -32,6 +33,18 @@ + #define FLREG_BASE(reg) ((reg & 0x00000fff) << 12); + #define FLREG_LIMIT(reg) (((reg & 0x0fff0000) >> 4) | 0xfff); + ++enum input_file_type_t { ++ IF_normal, ++ IF_fdt, ++ IF_uboot, ++}; ++ ++struct input_file { ++ char *fname; ++ unsigned int addr; ++ enum input_file_type_t type; ++}; ++ + /** + * find_fd() - Find the flash description in the ROM image + * +@@ -54,7 +67,8 @@ + return NULL; + } + +- debug("Found Flash Descriptor signature at 0x%08x\n", i); ++ debug("Found Flash Descriptor signature at 0x%08lx\n", ++ (char *)ptr - image); + + return (struct fdbar_t *)ptr; + } +@@ -464,6 +478,16 @@ + return ret; + } + ++static int perror_fname(const char *fmt, const char *fname) ++{ ++ char msg[strlen(fmt) + strlen(fname) + 1]; ++ ++ sprintf(msg, fmt, fname); ++ perror(msg); ++ ++ return -1; ++} ++ + /** + * write_image() - Write the image to a file + * +@@ -480,10 +504,10 @@ + + new_fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC, S_IRUSR | + S_IWUSR | S_IRGRP | S_IROTH); +- if (write(new_fd, image, size) != size) { +- perror("Error while writing"); +- return -1; +- } ++ if (new_fd < 0) ++ return perror_fname("Could not open file '%s'", filename); ++ if (write(new_fd, image, size) != size) ++ return perror_fname("Could not write file '%s'", filename); + close(new_fd); + + return 0; +@@ -585,14 +609,10 @@ + int fd = open(fname, O_RDONLY); + struct stat buf; + +- if (fd == -1) { +- perror("Could not open file"); +- return -1; +- } +- if (fstat(fd, &buf) == -1) { +- perror("Could not stat file"); +- return -1; +- } ++ if (fd == -1) ++ return perror_fname("Could not open file '%s'", fname); ++ if (fstat(fd, &buf) == -1) ++ return perror_fname("Could not stat file '%s'", fname); + *sizep = buf.st_size; + debug("File %s is %d bytes\n", fname, *sizep); + +@@ -686,7 +706,7 @@ + * 0xffffffff so use an address relative to that. For an + * 8MB ROM the start address is 0xfff80000. + * @write_fname: Filename to add to the image +- * @return 0 if OK, -ve on error ++ * @return number of bytes written if OK, -ve on error + */ + static int write_data(char *image, int size, unsigned int addr, + const char *write_fname) +@@ -698,7 +718,7 @@ + if (write_fd < 0) + return write_fd; + +- offset = addr + size; ++ offset = (uint32_t)(addr + size); + debug("Writing %s to offset %#x\n", write_fname, offset); + + if (offset < 0 || offset + write_size > size) { +@@ -714,6 +734,68 @@ + + close(write_fd); + ++ return write_size; ++} ++ ++/** ++ * write_uboot() - Write U-Boot, device tree and microcode pointer ++ * ++ * This writes U-Boot into a place in the flash, followed by its device tree. ++ * The microcode pointer is written so that U-Boot can find the microcode in ++ * the device tree very early in boot. ++ * ++ * @image: Pointer to image ++ * @size: Size of image in bytes ++ * @uboot: Input file information for u-boot.bin ++ * @fdt: Input file information for u-boot.dtb ++ * @ucode_ptr: Address in U-Boot where the microcode pointer should be placed ++ * @return 0 if OK, -ve on error ++ */ ++static int write_uboot(char *image, int size, struct input_file *uboot, ++ struct input_file *fdt, unsigned int ucode_ptr) ++{ ++ const void *blob; ++ const char *data; ++ int uboot_size; ++ uint32_t *ptr; ++ int data_size; ++ int offset; ++ int node; ++ int ret; ++ ++ uboot_size = write_data(image, size, uboot->addr, uboot->fname); ++ if (uboot_size < 0) ++ return uboot_size; ++ fdt->addr = uboot->addr + uboot_size; ++ debug("U-Boot size %#x, FDT at %#x\n", uboot_size, fdt->addr); ++ ret = write_data(image, size, fdt->addr, fdt->fname); ++ if (ret < 0) ++ return ret; ++ ++ if (ucode_ptr) { ++ blob = (void *)image + (uint32_t)(fdt->addr + size); ++ debug("DTB at %lx\n", (char *)blob - image); ++ node = fdt_node_offset_by_compatible(blob, 0, ++ "intel,microcode"); ++ if (node < 0) { ++ debug("No microcode found in FDT: %s\n", ++ fdt_strerror(node)); ++ return -ENOENT; ++ } ++ data = fdt_getprop(blob, node, "data", &data_size); ++ if (!data) { ++ debug("No microcode data found in FDT: %s\n", ++ fdt_strerror(data_size)); ++ return -ENOENT; ++ } ++ offset = ucode_ptr - uboot->addr; ++ ptr = (void *)image + offset; ++ ptr[0] = uboot->addr + (data - image); ++ ptr[1] = data_size; ++ debug("Wrote microcode pointer at %x: addr=%x, size=%x\n", ++ ucode_ptr, ptr[0], ptr[1]); ++ } ++ + return 0; + } + +@@ -732,6 +814,7 @@ + " -x | --extract: extract intel fd modules\n" + " -i | --inject : inject file into region \n" + " -w | --write : write file to appear at memory address \n" ++ " multiple files can be written simultaneously\n" + " -s | --spifreq <20|33|50> set the SPI frequency\n" + " -e | --em100 set SPI frequency to 20MHz and disable\n" + " Dual Output Fast Read Support\n" +@@ -778,17 +861,20 @@ + int mode_spifreq = 0, mode_em100 = 0, mode_locked = 0; + int mode_unlocked = 0, mode_write = 0, mode_write_descriptor = 0; + int create = 0; +- char *region_type_string = NULL, *src_fname = NULL; +- char *addr_str = NULL; ++ char *region_type_string = NULL, *inject_fname = NULL; ++ char *desc_fname = NULL, *addr_str = NULL; + int region_type = -1, inputfreq = 0; + enum spi_frequency spifreq = SPI_FREQUENCY_20MHZ; +- unsigned int addr = 0; ++ struct input_file input_file[WRITE_MAX], *ifile, *fdt = NULL; ++ unsigned char wr_idx, wr_num = 0; + int rom_size = -1; + bool write_it; + char *filename; + char *outfile = NULL; + struct stat buf; + int size = 0; ++ unsigned int ucode_ptr = 0; ++ bool have_uboot = false; + int bios_fd; + char *image; + int ret; +@@ -798,18 +884,21 @@ + {"descriptor", 1, NULL, 'D'}, + {"em100", 0, NULL, 'e'}, + {"extract", 0, NULL, 'x'}, ++ {"fdt", 1, NULL, 'f'}, + {"inject", 1, NULL, 'i'}, + {"lock", 0, NULL, 'l'}, ++ {"microcode", 1, NULL, 'm'}, + {"romsize", 1, NULL, 'r'}, + {"spifreq", 1, NULL, 's'}, + {"unlock", 0, NULL, 'u'}, ++ {"uboot", 1, NULL, 'U'}, + {"write", 1, NULL, 'w'}, + {"version", 0, NULL, 'v'}, + {"help", 0, NULL, 'h'}, + {0, 0, 0, 0} + }; + +- while ((opt = getopt_long(argc, argv, "cdD:ehi:lr:s:uvw:x?", ++ while ((opt = getopt_long(argc, argv, "cdD:ef:hi:lm:r:s:uU:vw:x?", + long_options, &option_index)) != EOF) { + switch (opt) { + case 'c': +@@ -820,14 +909,14 @@ + break; + case 'D': + mode_write_descriptor = 1; +- src_fname = optarg; ++ desc_fname = optarg; + break; + case 'e': + mode_em100 = 1; + break; + case 'i': + if (get_two_words(optarg, ®ion_type_string, +- &src_fname)) { ++ &inject_fname)) { + print_usage(argv[0]); + exit(EXIT_FAILURE); + } +@@ -852,6 +941,9 @@ + case 'l': + mode_locked = 1; + break; ++ case 'm': ++ ucode_ptr = strtoul(optarg, NULL, 0); ++ break; + case 'r': + rom_size = strtol(optarg, NULL, 0); + debug("ROM size %d\n", rom_size); +@@ -885,12 +977,29 @@ + exit(EXIT_SUCCESS); + break; + case 'w': ++ case 'U': ++ case 'f': ++ ifile = &input_file[wr_num]; + mode_write = 1; +- if (get_two_words(optarg, &addr_str, &src_fname)) { +- print_usage(argv[0]); +- exit(EXIT_FAILURE); ++ if (wr_num < WRITE_MAX) { ++ if (get_two_words(optarg, &addr_str, ++ &ifile->fname)) { ++ print_usage(argv[0]); ++ exit(EXIT_FAILURE); ++ } ++ ifile->addr = strtol(optarg, NULL, 0); ++ ifile->type = opt == 'f' ? IF_fdt : ++ opt == 'U' ? IF_uboot : IF_normal; ++ if (ifile->type == IF_fdt) ++ fdt = ifile; ++ else if (ifile->type == IF_uboot) ++ have_uboot = true; ++ wr_num++; ++ } else { ++ fprintf(stderr, ++ "The number of files to write simultaneously exceeds the limitation (%d)\n", ++ WRITE_MAX); + } +- addr = strtol(optarg, NULL, 0); + break; + case 'x': + mode_extract = 1; +@@ -941,6 +1050,13 @@ + exit(EXIT_FAILURE); + } + ++ if (have_uboot && !fdt) { ++ fprintf(stderr, ++ "You must supply a device tree file for U-Boot\n\n"); ++ print_usage(argv[0]); ++ exit(EXIT_FAILURE); ++ } ++ + filename = argv[optind]; + if (optind + 2 != argc) + outfile = argv[optind + 1]; +@@ -997,13 +1113,27 @@ + } + + if (mode_write_descriptor) +- ret = write_data(image, size, -size, src_fname); ++ ret = write_data(image, size, -size, desc_fname); + + if (mode_inject) +- ret = inject_region(image, size, region_type, src_fname); ++ ret = inject_region(image, size, region_type, inject_fname); + +- if (mode_write) +- ret = write_data(image, size, addr, src_fname); ++ if (mode_write) { ++ for (wr_idx = 0; wr_idx < wr_num; wr_idx++) { ++ ifile = &input_file[wr_idx]; ++ if (ifile->type == IF_fdt) { ++ continue; ++ } else if (ifile->type == IF_uboot) { ++ ret = write_uboot(image, size, ifile, fdt, ++ ucode_ptr); ++ } else { ++ ret = write_data(image, size, ifile->addr, ++ ifile->fname); ++ } ++ if (ret < 0) ++ break; ++ } ++ } + + if (mode_spifreq) + set_spi_frequency(image, size, spifreq); +@@ -1035,5 +1165,5 @@ + free(image); + close(bios_fd); + +- return ret ? 1 : 0; ++ return ret < 0 ? 1 : 0; + } +diff -ruN u-boot-2015.01-rc3/tools/ifdtool.h u-boot/tools/ifdtool.h +--- u-boot-2015.01-rc3/tools/ifdtool.h 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/tools/ifdtool.h 2015-01-01 17:34:32.893492759 +0100 +@@ -14,6 +14,8 @@ + + #define IFDTOOL_VERSION "1.1-U-Boot" + ++#define WRITE_MAX 16 ++ + enum spi_frequency { + SPI_FREQUENCY_20MHZ = 0, + SPI_FREQUENCY_33MHZ = 1, +diff -ruN u-boot-2015.01-rc3/tools/Makefile u-boot/tools/Makefile +--- u-boot-2015.01-rc3/tools/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/tools/Makefile 2015-01-01 17:34:32.885492891 +0100 +@@ -126,6 +126,7 @@ + hostprogs-$(CONFIG_EXYNOS5420) += mkexynosspl + HOSTCFLAGS_mkexynosspl.o := -pedantic + ++ifdtool-objs := $(LIBFDT_OBJS) ifdtool.o + hostprogs-$(CONFIG_X86) += ifdtool + + hostprogs-$(CONFIG_MX23) += mxsboot +diff -ruN u-boot-2015.01-rc3/tools/microcode-tool u-boot/tools/microcode-tool +--- u-boot-2015.01-rc3/tools/microcode-tool 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/tools/microcode-tool 2015-01-01 17:34:32.897492694 +0100 +@@ -0,0 +1,253 @@ ++#!/usr/bin/env python ++# ++# Copyright (c) 2014 Google, Inc ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++# Intel microcode update tool ++ ++from optparse import OptionParser ++import os ++import re ++import struct ++import sys ++ ++MICROCODE_DIR = 'arch/x86/dts/microcode' ++ ++class Microcode: ++ """Holds information about the microcode for a particular model of CPU. ++ ++ Attributes: ++ name: Name of the CPU this microcode is for, including any version ++ information (e.g. 'm12206a7_00000029') ++ model: Model code string (this is cpuid(1).eax, e.g. '206a7') ++ words: List of hex words containing the microcode. The first 16 words ++ are the public header. ++ """ ++ def __init__(self, name, data): ++ self.name = name ++ # Convert data into a list of hex words ++ self.words = [] ++ for value in ''.join(data).split(','): ++ hexval = value.strip() ++ if hexval: ++ self.words.append(int(hexval, 0)) ++ ++ # The model is in the 4rd hex word ++ self.model = '%x' % self.words[3] ++ ++def ParseFile(fname): ++ """Parse a micrcode.dat file and return the component parts ++ ++ Args: ++ fname: Filename to parse ++ Returns: ++ 3-Tuple: ++ date: String containing date from the file's header ++ license_text: List of text lines for the license file ++ microcodes: List of Microcode objects from the file ++ """ ++ re_date = re.compile('/\* *(.* [0-9]{4}) *\*/$') ++ re_license = re.compile('/[^-*+] *(.*)$') ++ re_name = re.compile('/\* *(.*)\.inc *\*/', re.IGNORECASE) ++ microcodes = {} ++ license_text = [] ++ date = '' ++ data = [] ++ name = None ++ with open(fname) as fd: ++ for line in fd: ++ line = line.rstrip() ++ m_date = re_date.match(line) ++ m_license = re_license.match(line) ++ m_name = re_name.match(line) ++ if m_name: ++ if name: ++ microcodes[name] = Microcode(name, data) ++ name = m_name.group(1).lower() ++ data = [] ++ elif m_license: ++ license_text.append(m_license.group(1)) ++ elif m_date: ++ date = m_date.group(1) ++ else: ++ data.append(line) ++ if name: ++ microcodes[name] = Microcode(name, data) ++ return date, license_text, microcodes ++ ++def List(date, microcodes, model): ++ """List the available microcode chunks ++ ++ Args: ++ date: Date of the microcode file ++ microcodes: Dict of Microcode objects indexed by name ++ model: Model string to search for, or None ++ """ ++ print 'Date: %s' % date ++ if model: ++ mcode_list, tried = FindMicrocode(microcodes, model.lower()) ++ print 'Matching models %s:' % (', '.join(tried)) ++ else: ++ print 'All models:' ++ mcode_list = [microcodes[m] for m in microcodes.keys()] ++ for mcode in mcode_list: ++ print '%-20s: model %s' % (mcode.name, mcode.model) ++ ++def FindMicrocode(microcodes, model): ++ """Find all the microcode chunks which match the given model. ++ ++ This model is something like 306a9 (the value returned in eax from ++ cpuid(1) when running on Intel CPUs). But we allow a partial match, ++ omitting the last 1 or two characters to allow many families to have the ++ same microcode. ++ ++ If the model name is ambiguous we return a list of matches. ++ ++ Args: ++ microcodes: Dict of Microcode objects indexed by name ++ model: String containing model name to find ++ Returns: ++ Tuple: ++ List of matching Microcode objects ++ List of abbreviations we tried ++ """ ++ # Allow a full name to be used ++ mcode = microcodes.get(model) ++ if mcode: ++ return [mcode], [] ++ ++ tried = [] ++ found = [] ++ for i in range(3): ++ abbrev = model[:-i] if i else model ++ tried.append(abbrev) ++ for mcode in microcodes.values(): ++ if mcode.model.startswith(abbrev): ++ found.append(mcode) ++ if found: ++ break ++ return found, tried ++ ++def CreateFile(date, license_text, mcode, outfile): ++ """Create a microcode file in U-Boot's .dtsi format ++ ++ Args: ++ date: String containing date of original microcode file ++ license: List of text lines for the license file ++ mcode: Microcode object to write ++ outfile: Filename to write to ('-' for stdout) ++ """ ++ out = '''/*%s ++ * --- ++ * This is a device tree fragment. Use #include to add these properties to a ++ * node. ++ * ++ * Date: %s ++ */ ++ ++compatible = "intel,microcode"; ++intel,header-version = <%d>; ++intel,update-revision = <%#x>; ++intel,date-code = <%#x>; ++intel,processor-signature = <%#x>; ++intel,checksum = <%#x>; ++intel,loader-revision = <%d>; ++intel,processor-flags = <%#x>; ++ ++/* The first 48-bytes are the public header which repeats the above data */ ++data = <%s ++\t>;''' ++ words = '' ++ for i in range(len(mcode.words)): ++ if not (i & 3): ++ words += '\n' ++ val = mcode.words[i] ++ # Change each word so it will be little-endian in the FDT ++ # This data is needed before RAM is available on some platforms so we ++ # cannot do an endianness swap on boot. ++ val = struct.unpack("I", val))[0] ++ words += '\t%#010x' % val ++ ++ # Take care to avoid adding a space before a tab ++ text = '' ++ for line in license_text: ++ if line[0] == '\t': ++ text += '\n *' + line ++ else: ++ text += '\n * ' + line ++ args = [text, date] ++ args += [mcode.words[i] for i in range(7)] ++ args.append(words) ++ if outfile == '-': ++ print out % tuple(args) ++ else: ++ if not outfile: ++ if not os.path.exists(MICROCODE_DIR): ++ print >> sys.stderr, "Creating directory '%s'" % MICROCODE_DIR ++ os.makedirs(MICROCODE_DIR) ++ outfile = os.path.join(MICROCODE_DIR, mcode.name + '.dtsi') ++ print >> sys.stderr, "Writing microcode for '%s' to '%s'" % ( ++ mcode.name, outfile) ++ with open(outfile, 'w') as fd: ++ print >> fd, out % tuple(args) ++ ++def MicrocodeTool(): ++ """Run the microcode tool""" ++ commands = 'create,license,list'.split(',') ++ parser = OptionParser() ++ parser.add_option('-d', '--mcfile', type='string', action='store', ++ help='Name of microcode.dat file') ++ parser.add_option('-m', '--model', type='string', action='store', ++ help='Model name to extract') ++ parser.add_option('-o', '--outfile', type='string', action='store', ++ help='Filename to use for output (- for stdout), default is' ++ ' %s/.dtsi' % MICROCODE_DIR) ++ parser.usage += """ command ++ ++ Process an Intel microcode file (use -h for help). Commands: ++ ++ create Create microcode .dtsi file for a model ++ list List available models in microcode file ++ license Print the license ++ ++ Typical usage: ++ ++ ./tools/microcode-tool -d microcode.dat -m 306a create ++ ++ This will find the appropriate file and write it to %s.""" % MICROCODE_DIR ++ ++ (options, args) = parser.parse_args() ++ if not args: ++ parser.error('Please specify a command') ++ cmd = args[0] ++ if cmd not in commands: ++ parser.error("Unknown command '%s'" % cmd) ++ ++ if not options.mcfile: ++ parser.error('You must specify a microcode file') ++ date, license_text, microcodes = ParseFile(options.mcfile) ++ ++ if cmd == 'list': ++ List(date, microcodes, options.model) ++ elif cmd == 'license': ++ print '\n'.join(license_text) ++ elif cmd == 'create': ++ if not options.model: ++ parser.error('You must specify a model to create') ++ model = options.model.lower() ++ mcode_list, tried = FindMicrocode(microcodes, model) ++ if not mcode_list: ++ parser.error("Unknown model '%s' (%s) - try 'list' to list" % ++ (model, ', '.join(tried))) ++ if len(mcode_list) > 1: ++ parser.error("Ambiguous model '%s' (%s) matched %s - try 'list' " ++ "to list or specify a particular file" % ++ (model, ', '.join(tried), ++ ', '.join([m.name for m in mcode_list]))) ++ CreateFile(date, license_text, mcode_list[0], options.outfile) ++ else: ++ parser.error("Unknown command '%s'" % cmd) ++ ++if __name__ == "__main__": ++ MicrocodeTool() +diff -ruN u-boot-2015.01-rc3/tools/microcode-tool.py u-boot/tools/microcode-tool.py +--- u-boot-2015.01-rc3/tools/microcode-tool.py 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot/tools/microcode-tool.py 2015-01-01 17:34:32.897492694 +0100 +@@ -0,0 +1,253 @@ ++#!/usr/bin/env python ++# ++# Copyright (c) 2014 Google, Inc ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++# Intel microcode update tool ++ ++from optparse import OptionParser ++import os ++import re ++import struct ++import sys ++ ++MICROCODE_DIR = 'arch/x86/dts/microcode' ++ ++class Microcode: ++ """Holds information about the microcode for a particular model of CPU. ++ ++ Attributes: ++ name: Name of the CPU this microcode is for, including any version ++ information (e.g. 'm12206a7_00000029') ++ model: Model code string (this is cpuid(1).eax, e.g. '206a7') ++ words: List of hex words containing the microcode. The first 16 words ++ are the public header. ++ """ ++ def __init__(self, name, data): ++ self.name = name ++ # Convert data into a list of hex words ++ self.words = [] ++ for value in ''.join(data).split(','): ++ hexval = value.strip() ++ if hexval: ++ self.words.append(int(hexval, 0)) ++ ++ # The model is in the 4rd hex word ++ self.model = '%x' % self.words[3] ++ ++def ParseFile(fname): ++ """Parse a micrcode.dat file and return the component parts ++ ++ Args: ++ fname: Filename to parse ++ Returns: ++ 3-Tuple: ++ date: String containing date from the file's header ++ license_text: List of text lines for the license file ++ microcodes: List of Microcode objects from the file ++ """ ++ re_date = re.compile('/\* *(.* [0-9]{4}) *\*/$') ++ re_license = re.compile('/[^-*+] *(.*)$') ++ re_name = re.compile('/\* *(.*)\.inc *\*/', re.IGNORECASE) ++ microcodes = {} ++ license_text = [] ++ date = '' ++ data = [] ++ name = None ++ with open(fname) as fd: ++ for line in fd: ++ line = line.rstrip() ++ m_date = re_date.match(line) ++ m_license = re_license.match(line) ++ m_name = re_name.match(line) ++ if m_name: ++ if name: ++ microcodes[name] = Microcode(name, data) ++ name = m_name.group(1).lower() ++ data = [] ++ elif m_license: ++ license_text.append(m_license.group(1)) ++ elif m_date: ++ date = m_date.group(1) ++ else: ++ data.append(line) ++ if name: ++ microcodes[name] = Microcode(name, data) ++ return date, license_text, microcodes ++ ++def List(date, microcodes, model): ++ """List the available microcode chunks ++ ++ Args: ++ date: Date of the microcode file ++ microcodes: Dict of Microcode objects indexed by name ++ model: Model string to search for, or None ++ """ ++ print 'Date: %s' % date ++ if model: ++ mcode_list, tried = FindMicrocode(microcodes, model.lower()) ++ print 'Matching models %s:' % (', '.join(tried)) ++ else: ++ print 'All models:' ++ mcode_list = [microcodes[m] for m in microcodes.keys()] ++ for mcode in mcode_list: ++ print '%-20s: model %s' % (mcode.name, mcode.model) ++ ++def FindMicrocode(microcodes, model): ++ """Find all the microcode chunks which match the given model. ++ ++ This model is something like 306a9 (the value returned in eax from ++ cpuid(1) when running on Intel CPUs). But we allow a partial match, ++ omitting the last 1 or two characters to allow many families to have the ++ same microcode. ++ ++ If the model name is ambiguous we return a list of matches. ++ ++ Args: ++ microcodes: Dict of Microcode objects indexed by name ++ model: String containing model name to find ++ Returns: ++ Tuple: ++ List of matching Microcode objects ++ List of abbreviations we tried ++ """ ++ # Allow a full name to be used ++ mcode = microcodes.get(model) ++ if mcode: ++ return [mcode], [] ++ ++ tried = [] ++ found = [] ++ for i in range(3): ++ abbrev = model[:-i] if i else model ++ tried.append(abbrev) ++ for mcode in microcodes.values(): ++ if mcode.model.startswith(abbrev): ++ found.append(mcode) ++ if found: ++ break ++ return found, tried ++ ++def CreateFile(date, license_text, mcode, outfile): ++ """Create a microcode file in U-Boot's .dtsi format ++ ++ Args: ++ date: String containing date of original microcode file ++ license: List of text lines for the license file ++ mcode: Microcode object to write ++ outfile: Filename to write to ('-' for stdout) ++ """ ++ out = '''/*%s ++ * --- ++ * This is a device tree fragment. Use #include to add these properties to a ++ * node. ++ * ++ * Date: %s ++ */ ++ ++compatible = "intel,microcode"; ++intel,header-version = <%d>; ++intel,update-revision = <%#x>; ++intel,date-code = <%#x>; ++intel,processor-signature = <%#x>; ++intel,checksum = <%#x>; ++intel,loader-revision = <%d>; ++intel,processor-flags = <%#x>; ++ ++/* The first 48-bytes are the public header which repeats the above data */ ++data = <%s ++\t>;''' ++ words = '' ++ for i in range(len(mcode.words)): ++ if not (i & 3): ++ words += '\n' ++ val = mcode.words[i] ++ # Change each word so it will be little-endian in the FDT ++ # This data is needed before RAM is available on some platforms so we ++ # cannot do an endianness swap on boot. ++ val = struct.unpack("I", val))[0] ++ words += '\t%#010x' % val ++ ++ # Take care to avoid adding a space before a tab ++ text = '' ++ for line in license_text: ++ if line[0] == '\t': ++ text += '\n *' + line ++ else: ++ text += '\n * ' + line ++ args = [text, date] ++ args += [mcode.words[i] for i in range(7)] ++ args.append(words) ++ if outfile == '-': ++ print out % tuple(args) ++ else: ++ if not outfile: ++ if not os.path.exists(MICROCODE_DIR): ++ print >> sys.stderr, "Creating directory '%s'" % MICROCODE_DIR ++ os.makedirs(MICROCODE_DIR) ++ outfile = os.path.join(MICROCODE_DIR, mcode.name + '.dtsi') ++ print >> sys.stderr, "Writing microcode for '%s' to '%s'" % ( ++ mcode.name, outfile) ++ with open(outfile, 'w') as fd: ++ print >> fd, out % tuple(args) ++ ++def MicrocodeTool(): ++ """Run the microcode tool""" ++ commands = 'create,license,list'.split(',') ++ parser = OptionParser() ++ parser.add_option('-d', '--mcfile', type='string', action='store', ++ help='Name of microcode.dat file') ++ parser.add_option('-m', '--model', type='string', action='store', ++ help='Model name to extract') ++ parser.add_option('-o', '--outfile', type='string', action='store', ++ help='Filename to use for output (- for stdout), default is' ++ ' %s/.dtsi' % MICROCODE_DIR) ++ parser.usage += """ command ++ ++ Process an Intel microcode file (use -h for help). Commands: ++ ++ create Create microcode .dtsi file for a model ++ list List available models in microcode file ++ license Print the license ++ ++ Typical usage: ++ ++ ./tools/microcode-tool -d microcode.dat -m 306a create ++ ++ This will find the appropriate file and write it to %s.""" % MICROCODE_DIR ++ ++ (options, args) = parser.parse_args() ++ if not args: ++ parser.error('Please specify a command') ++ cmd = args[0] ++ if cmd not in commands: ++ parser.error("Unknown command '%s'" % cmd) ++ ++ if not options.mcfile: ++ parser.error('You must specify a microcode file') ++ date, license_text, microcodes = ParseFile(options.mcfile) ++ ++ if cmd == 'list': ++ List(date, microcodes, options.model) ++ elif cmd == 'license': ++ print '\n'.join(license_text) ++ elif cmd == 'create': ++ if not options.model: ++ parser.error('You must specify a model to create') ++ model = options.model.lower() ++ mcode_list, tried = FindMicrocode(microcodes, model) ++ if not mcode_list: ++ parser.error("Unknown model '%s' (%s) - try 'list' to list" % ++ (model, ', '.join(tried))) ++ if len(mcode_list) > 1: ++ parser.error("Ambiguous model '%s' (%s) matched %s - try 'list' " ++ "to list or specify a particular file" % ++ (model, ', '.join(tried), ++ ', '.join([m.name for m in mcode_list]))) ++ CreateFile(date, license_text, mcode_list[0], options.outfile) ++ else: ++ parser.error("Unknown command '%s'" % cmd) ++ ++if __name__ == "__main__": ++ MicrocodeTool() +diff -ruN u-boot-2015.01-rc3/tools/pblimage.c u-boot/tools/pblimage.c +--- u-boot-2015.01-rc3/tools/pblimage.c 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot/tools/pblimage.c 2015-01-01 17:34:32.905492563 +0100 +@@ -1,5 +1,5 @@ + /* +- * Copyright 2012 Freescale Semiconductor, Inc. ++ * Copyright 2012-2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +@@ -8,6 +8,10 @@ + #include "pblimage.h" + #include "pbl_crc32.h" + ++#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) ++#define PBL_ACS_CONT_CMD 0x81000000 ++#define PBL_ADDR_24BIT_MASK 0x00ffffff ++ + /* + * Initialize to an invalid value. + */ +@@ -22,6 +26,13 @@ + static char *fname = "Unknown"; + static int lineno = -1; + static struct pbl_header pblimage_header; ++static int uboot_size; ++static int arch_flag; ++ ++static uint32_t pbl_cmd_initaddr; ++static uint32_t pbi_crc_cmd1; ++static uint32_t pbi_crc_cmd2; ++static uint32_t pbl_end_cmd[4]; + + static union + { +@@ -38,20 +49,6 @@ + * start offset by subtracting the size of the u-boot image from the + * top of the allowable 24-bit range. + */ +-static void init_next_pbl_cmd(FILE *fp_uboot) +-{ +- struct stat st; +- int fd = fileno(fp_uboot); +- +- if (fstat(fd, &st) == -1) { +- printf("Error: Could not determine u-boot image size. %s\n", +- strerror(errno)); +- exit(EXIT_FAILURE); +- } +- +- next_pbl_cmd = 0x82000000 - st.st_size; +-} +- + static void generate_pbl_cmd(void) + { + uint32_t val = next_pbl_cmd; +@@ -66,11 +63,15 @@ + + static void pbl_fget(size_t size, FILE *stream) + { +- unsigned char c; ++ unsigned char c = 0xff; + int c_temp; + +- while (size && (c_temp = fgetc(stream)) != EOF) { +- c = (unsigned char)c_temp; ++ while (size) { ++ c_temp = fgetc(stream); ++ if (c_temp != EOF) ++ c = (unsigned char)c_temp; ++ else if ((c_temp == EOF) && (arch_flag == IH_ARCH_ARM)) ++ c = 0xff; + *pmem_buf++ = c; + pbl_size++; + size--; +@@ -80,8 +81,8 @@ + /* load split u-boot with PBI command 81xxxxxx. */ + static void load_uboot(FILE *fp_uboot) + { +- init_next_pbl_cmd(fp_uboot); +- while (next_pbl_cmd < 0x82000000) { ++ next_pbl_cmd = pbl_cmd_initaddr - uboot_size; ++ while (next_pbl_cmd < pbl_cmd_initaddr) { + generate_pbl_cmd(); + pbl_fget(64, fp_uboot); + } +@@ -154,8 +155,6 @@ + /* write end command and crc command to memory. */ + static void add_end_cmd(void) + { +- uint32_t pbl_end_cmd[4] = {0x09138000, 0x00000000, +- 0x091380c0, 0x00000000}; + uint32_t crc32_pbl; + int i; + unsigned char *p = (unsigned char *)&pbl_end_cmd; +@@ -172,8 +171,8 @@ + + /* Add PBI CRC command. */ + *pmem_buf++ = 0x08; +- *pmem_buf++ = 0x13; +- *pmem_buf++ = 0x80; ++ *pmem_buf++ = pbi_crc_cmd1; ++ *pmem_buf++ = pbi_crc_cmd2; + *pmem_buf++ = 0x40; + pbl_size += 4; + +@@ -184,17 +183,6 @@ + *pmem_buf++ = (crc32_pbl >> 8) & 0xff; + *pmem_buf++ = (crc32_pbl) & 0xff; + pbl_size += 4; +- +- if ((pbl_size % 16) != 0) { +- for (i = 0; i < 8; i++) { +- *pmem_buf++ = 0x0; +- pbl_size++; +- } +- } +- if ((pbl_size % 16 != 0)) { +- printf("Error: Bad size of image file\n"); +- exit(EXIT_FAILURE); +- } + } + + void pbl_load_uboot(int ifd, struct image_tool_params *params) +@@ -268,12 +256,64 @@ + /*nothing need to do, pbl_load_uboot takes care of whole file. */ + } + ++int pblimage_check_params(struct image_tool_params *params) ++{ ++ FILE *fp_uboot; ++ int fd; ++ struct stat st; ++ ++ if (!params) ++ return EXIT_FAILURE; ++ ++ fp_uboot = fopen(params->datafile, "r"); ++ if (fp_uboot == NULL) { ++ printf("Error: %s open failed\n", params->datafile); ++ exit(EXIT_FAILURE); ++ } ++ fd = fileno(fp_uboot); ++ ++ if (fstat(fd, &st) == -1) { ++ printf("Error: Could not determine u-boot image size. %s\n", ++ strerror(errno)); ++ exit(EXIT_FAILURE); ++ } ++ ++ /* For the variable size, we need to pad it to 64 byte boundary */ ++ uboot_size = roundup(st.st_size, 64); ++ ++ if (params->arch == IH_ARCH_ARM) { ++ arch_flag = IH_ARCH_ARM; ++ pbi_crc_cmd1 = 0x61; ++ pbi_crc_cmd2 = 0; ++ pbl_cmd_initaddr = params->addr & PBL_ADDR_24BIT_MASK; ++ pbl_cmd_initaddr |= PBL_ACS_CONT_CMD; ++ pbl_cmd_initaddr |= uboot_size; ++ pbl_end_cmd[0] = 0x09610000; ++ pbl_end_cmd[1] = 0x00000000; ++ pbl_end_cmd[2] = 0x096100c0; ++ pbl_end_cmd[3] = 0x00000000; ++ } else if (params->arch == IH_ARCH_PPC) { ++ arch_flag = IH_ARCH_PPC; ++ pbi_crc_cmd1 = 0x13; ++ pbi_crc_cmd2 = 0x80; ++ pbl_cmd_initaddr = 0x82000000; ++ pbl_end_cmd[0] = 0x09138000; ++ pbl_end_cmd[1] = 0x00000000; ++ pbl_end_cmd[2] = 0x091380c0; ++ pbl_end_cmd[3] = 0x00000000; ++ } ++ ++ next_pbl_cmd = pbl_cmd_initaddr; ++ return 0; ++}; ++ + /* pblimage parameters */ + static struct image_type_params pblimage_params = { + .name = "Freescale PBL Boot Image support", + .header_size = sizeof(struct pbl_header), + .hdr = (void *)&pblimage_header, + .check_image_type = pblimage_check_image_types, ++ .check_params = pblimage_check_params, + .verify_header = pblimage_verify_header, + .print_header = pblimage_print_header, + .set_header = pblimage_set_header, diff --git a/package/boot/uboot-sunxi/patches/001-uboot-sunxi-509d96d4f1f602d62d36db660973249e16f9d088.patch b/package/boot/uboot-sunxi/patches/001-uboot-sunxi-509d96d4f1f602d62d36db660973249e16f9d088.patch deleted file mode 100644 index 15aac6b264..0000000000 --- a/package/boot/uboot-sunxi/patches/001-uboot-sunxi-509d96d4f1f602d62d36db660973249e16f9d088.patch +++ /dev/null @@ -1,10002 +0,0 @@ -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/cmd_boot.c u-boot-sunxi/arch/arm/cpu/armv7/cmd_boot.c ---- u-boot-2014.04/arch/arm/cpu/armv7/cmd_boot.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/cmd_boot.c 2014-09-06 16:58:35.193953144 +0200 -@@ -0,0 +1,20 @@ -+/* -+ * (C) Copyright 2012 Henrik Nordstrom -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+/* -+ * Misc boot support -+ */ -+#include -+#include -+ -+#ifdef CONFIG_CMD_GO -+unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc, -+ char * const argv[]) -+{ -+ invalidate_icache_all(); -+ return entry(argc, argv); -+} -+#endif -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/Makefile u-boot-sunxi/arch/arm/cpu/armv7/Makefile ---- u-boot-2014.04/arch/arm/cpu/armv7/Makefile 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/arch/arm/cpu/armv7/Makefile 2014-09-06 16:58:35.185953145 +0200 -@@ -11,8 +11,9 @@ - - obj-y += cpu.o - obj-y += syslib.o -+obj-y += cmd_boot.o - --ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY),) -+ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI),) - ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y) - obj-y += lowlevel_init.o - endif -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/board.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/board.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/board.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/board.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,166 @@ -+/* -+ * (C) Copyright 2012 Henrik Nordstrom -+ * -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * Some init for sunxi platform. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#ifdef CONFIG_SPL_BUILD -+#include -+#endif -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_SPL_BUILD -+/* Pointer to the global data structure for SPL */ -+DECLARE_GLOBAL_DATA_PTR; -+ -+/* The sunxi internal brom will try to loader external bootloader -+ * from mmc0, nand flash, mmc2. -+ * Unfortunately we can't check how SPL was loaded so assume -+ * it's always the first SD/MMC controller -+ */ -+u32 spl_boot_device(void) -+{ -+ return BOOT_DEVICE_MMC1; -+} -+ -+/* No confirmation data available in SPL yet. Hardcode bootmode */ -+u32 spl_boot_mode(void) -+{ -+ return MMCSD_MODE_RAW; -+} -+#endif -+ -+int gpio_init(void) -+{ -+#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F) -+#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I) -+ /* disable GPB22,23 as uart0 tx,rx to avoid conflict */ -+ sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT); -+ sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT); -+#endif -+ sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF2_UART0_TX); -+ sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF4_UART0_RX); -+ sunxi_gpio_set_pull(SUNXI_GPF(4), 1); -+#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)) -+ sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX); -+ sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX); -+ sunxi_gpio_set_pull(SUNXI_GPB(23), 1); -+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN6I) -+ sunxi_gpio_set_cfgpin(SUNXI_GPH(20), 2); -+ sunxi_gpio_set_cfgpin(SUNXI_GPH(21), 2); -+ sunxi_gpio_set_pull(SUNXI_GPH(21), 1); -+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN5I) -+ sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX); -+ sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX); -+ sunxi_gpio_set_pull(SUNXI_GPB(20), 1); -+#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I) -+ sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX); -+ sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX); -+ sunxi_gpio_set_pull(SUNXI_GPG(4), 1); -+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_SUN8I) -+ sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL2_R_UART_TX); -+ sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL3_R_UART_RX); -+ sunxi_gpio_set_pull(SUNXI_GPL(3), 1); -+#else -+#error Unsupported console port number. Please fix pin mux settings in board.c -+#endif -+ -+ return 0; -+} -+ -+void reset_cpu(ulong addr) -+{ -+ watchdog_set(0); -+ while (1); -+} -+ -+/* do some early init */ -+void s_init(void) -+{ -+#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I) -+ /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */ -+ asm volatile( -+ "mrc p15, 0, r0, c1, c0, 1\n" -+ "orr r0, r0, #1 << 6\n" -+ "mcr p15, 0, r0, c1, c0, 1\n"); -+#endif -+ -+ watchdog_init(); -+ clock_init(); -+ timer_init(); -+ gpio_init(); -+ i2c_init_board(); -+ -+#ifdef CONFIG_SPL_BUILD -+ gd = &gdata; -+ preloader_console_init(); -+ -+#ifdef CONFIG_SPL_I2C_SUPPORT -+ /* Needed early by sunxi_board_init if PMU is enabled */ -+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); -+#endif -+#endif -+/* No SPL on sun6i, so we do sunxi_board_init() from non spl there */ -+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) -+ sunxi_board_init(); -+#endif -+} -+ -+#ifndef CONFIG_SYS_DCACHE_OFF -+void enable_caches(void) -+{ -+ /* Enable D-cache. I-cache is already enabled in start.S */ -+ dcache_enable(); -+} -+#endif -+ -+#ifdef CONFIG_CMD_NET -+/* -+ * Initializes on-chip ethernet controllers. -+ * to override, implement board_eth_init() -+ */ -+int cpu_eth_init(bd_t *bis) -+{ -+ __maybe_unused int rc; -+ -+#ifdef CONFIG_MACPWR -+ gpio_direction_output(CONFIG_MACPWR, 1); -+ mdelay(200); -+#endif -+ -+#ifdef CONFIG_SUNXI_EMAC -+ rc = sunxi_emac_initialize(bis); -+ if (rc < 0) { -+ printf("sunxi: failed to initialize emac\n"); -+ return rc; -+ } -+#endif -+ -+#ifdef CONFIG_SUNXI_GMAC -+ rc = sunxi_gmac_initialize(bis); -+ if (rc < 0) { -+ printf("sunxi: failed to initialize gmac\n"); -+ return rc; -+ } -+#endif -+ -+ return 0; -+} -+#endif -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,25 @@ -+/* -+ * (C) Copyright 2007-2012 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * (C) Copyright 2013 Luke Kenneth Casson Leighton -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+int clock_init(void) -+{ -+#ifdef CONFIG_SPL_BUILD -+ clock_init_safe(); -+#endif -+ clock_init_uart(); -+ -+ return 0; -+} -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock_sun4i.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock_sun4i.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock_sun4i.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock_sun4i.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,188 @@ -+/* -+ * sun4i, sun5i and sun7i specific clock code -+ * -+ * (C) Copyright 2007-2012 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * (C) Copyright 2013 Luke Kenneth Casson Leighton -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_SPL_BUILD -+void clock_init_safe(void) -+{ -+ struct sunxi_ccm_reg * const ccm = -+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ -+ /* Set safe defaults until PMU is configured */ -+ writel(AXI_DIV_1 << AXI_DIV_SHIFT | -+ AHB_DIV_2 << AHB_DIV_SHIFT | -+ APB0_DIV_1 << APB0_DIV_SHIFT | -+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, -+ &ccm->cpu_ahb_apb0_cfg); -+ writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg); -+ sdelay(200); -+ writel(AXI_DIV_1 << AXI_DIV_SHIFT | -+ AHB_DIV_2 << AHB_DIV_SHIFT | -+ APB0_DIV_1 << APB0_DIV_SHIFT | -+ CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, -+ &ccm->cpu_ahb_apb0_cfg); -+#ifdef CONFIG_SUN7I -+ writel(0x1 << AHB_GATE_OFFSET_DMA | readl(&ccm->ahb_gate0), -+ &ccm->ahb_gate0); -+#endif -+ writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); -+} -+#endif -+ -+void clock_init_uart(void) -+{ -+ struct sunxi_ccm_reg *const ccm = -+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ -+ /* uart clock source is apb1 */ -+ writel(APB1_CLK_SRC_OSC24M| -+ APB1_CLK_RATE_N_1| -+ APB1_CLK_RATE_M(1), -+ &ccm->apb1_clk_div_cfg); -+ -+ /* open the clock for uart */ -+ setbits_le32(&ccm->apb1_gate, -+ CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX-1)); -+} -+ -+int clock_twi_onoff(int port, int state) -+{ -+ struct sunxi_ccm_reg *const ccm = -+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ -+ if (port > 2) -+ return -1; -+ -+ /* set the apb clock gate for twi */ -+ if (state) -+ setbits_le32(&ccm->apb1_gate, -+ CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port)); -+ else -+ clrbits_le32(&ccm->apb1_gate, -+ CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port)); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_SPL_BUILD -+#define PLL1_CFG(N, K, M, P) ( 1 << CCM_PLL1_CFG_ENABLE_SHIFT | \ -+ 0 << CCM_PLL1_CFG_VCO_RST_SHIFT | \ -+ 8 << CCM_PLL1_CFG_VCO_BIAS_SHIFT | \ -+ 0 << CCM_PLL1_CFG_PLL4_EXCH_SHIFT | \ -+ 16 << CCM_PLL1_CFG_BIAS_CUR_SHIFT | \ -+ (P)<< CCM_PLL1_CFG_DIVP_SHIFT | \ -+ 2 << CCM_PLL1_CFG_LCK_TMR_SHIFT | \ -+ (N)<< CCM_PLL1_CFG_FACTOR_N_SHIFT | \ -+ (K)<< CCM_PLL1_CFG_FACTOR_K_SHIFT | \ -+ 0 << CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT | \ -+ 0 << CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT | \ -+ (M)<< CCM_PLL1_CFG_FACTOR_M_SHIFT) -+ -+static struct { -+ u32 pll1_cfg; -+ unsigned int freq; -+} pll1_para[] = { -+ /* This array must be ordered by frequency. */ -+ { PLL1_CFG(16, 0, 0, 0), 384000000 }, -+ { PLL1_CFG(16, 1, 0, 0), 768000000 }, -+ { PLL1_CFG(20, 1, 0, 0), 960000000 }, -+ { PLL1_CFG(21, 1, 0, 0), 1008000000}, -+ { PLL1_CFG(22, 1, 0, 0), 1056000000}, -+ { PLL1_CFG(23, 1, 0, 0), 1104000000}, -+ { PLL1_CFG(24, 1, 0, 0), 1152000000}, -+ { PLL1_CFG(25, 1, 0, 0), 1200000000}, -+ { PLL1_CFG(26, 1, 0, 0), 1248000000}, -+ { PLL1_CFG(27, 1, 0, 0), 1296000000}, -+ { PLL1_CFG(28, 1, 0, 0), 1344000000}, -+ { PLL1_CFG(29, 1, 0, 0), 1392000000}, -+ { PLL1_CFG(30, 1, 0, 0), 1440000000}, -+ { PLL1_CFG(31, 1, 0, 0), 1488000000}, -+ /* Final catchall entry */ -+ { PLL1_CFG(31, 1, 0, 0), ~0}, -+}; -+ -+void clock_set_pll1(unsigned int hz) -+{ -+ int i = 0; -+ int axi, ahb, apb0; -+ struct sunxi_ccm_reg * const ccm = -+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ -+ /* Find target frequency */ -+ while (pll1_para[i].freq < hz) -+ i++; -+ -+ hz = pll1_para[i].freq; -+ -+ /* Calculate system clock divisors */ -+ axi = DIV_ROUND_UP(hz, 432000000); /* Max 450MHz */ -+ ahb = DIV_ROUND_UP(hz/axi, 204000000); /* Max 250MHz */ -+ apb0 = 2; /* Max 150MHz */ -+ -+ printf("CPU: %uHz, AXI/AHB/APB: %d/%d/%d\n", hz, axi, ahb, apb0); -+ -+ /* Map divisors to register values */ -+ axi = axi - 1; -+ if (ahb > 4) -+ ahb = 3; -+ else if (ahb > 2) -+ ahb = 2; -+ else if (ahb > 1) -+ ahb = 1; -+ else -+ ahb = 0; -+ -+ apb0 = apb0 - 1; -+ -+ /* Switch to 24MHz clock while changing PLL1 */ -+ writel(AXI_DIV_1 << AXI_DIV_SHIFT | -+ AHB_DIV_2 << AHB_DIV_SHIFT | -+ APB0_DIV_1 << APB0_DIV_SHIFT | -+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, -+ &ccm->cpu_ahb_apb0_cfg); -+ sdelay(20); -+ -+ /* Configure sys clock divisors */ -+ writel(axi << AXI_DIV_SHIFT | -+ ahb << AHB_DIV_SHIFT | -+ apb0 << APB0_DIV_SHIFT | -+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, -+ &ccm->cpu_ahb_apb0_cfg); -+ -+ /* Configure PLL1 at the desired frequency */ -+ writel(pll1_para[i].pll1_cfg, &ccm->pll1_cfg); -+ sdelay(200); -+ -+ /* Switch CPU to PLL1 */ -+ writel(axi << AXI_DIV_SHIFT | -+ ahb << AHB_DIV_SHIFT | -+ apb0 << APB0_DIV_SHIFT | -+ CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, -+ &ccm->cpu_ahb_apb0_cfg); -+ sdelay(20); -+} -+#endif -+ -+unsigned int clock_get_pll6(void) -+{ -+ struct sunxi_ccm_reg *const ccm = -+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ uint32_t rval = readl(&ccm->pll6_cfg); -+ int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT); -+ int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1; -+ return 24000000 * n * k / 2; -+} -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock_sun6i.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock_sun6i.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock_sun6i.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock_sun6i.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,110 @@ -+/* -+ * sun6i specific clock code -+ * -+ * (C) Copyright 2007-2012 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * (C) Copyright 2013 Luke Kenneth Casson Leighton -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_SPL_BUILD -+void clock_init_safe(void) -+{ -+ struct sunxi_ccm_reg * const ccm = -+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ struct sunxi_prcm_reg * const prcm = -+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; -+ -+ /* Set PLL ldo voltage without this PLL6 does not work properly */ -+ writel(PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN | -+ PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140) | -+ PRCM_PLL_CTRL_LDO_KEY, &prcm->pll_ctrl1); -+ writel(PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN | -+ PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140) | -+ PRCM_PLL_CTRL_LDO_KEY, &prcm->pll_ctrl1); -+ writel(PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN | -+ PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140), -+ &prcm->pll_ctrl1); -+ -+ /* AXI and PLL1 settings from boot0 / boot1, PLL1 set to 486 Mhz */ -+ writel(AXI_DIV_3 << AXI_DIV_SHIFT | -+ ATB_DIV_2 << ATB_DIV_SHIFT | -+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, -+ &ccm->cpu_axi_cfg); -+ writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg); -+ sdelay(200); -+ writel(AXI_DIV_3 << AXI_DIV_SHIFT | -+ ATB_DIV_2 << ATB_DIV_SHIFT | -+ CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, -+ &ccm->cpu_axi_cfg); -+ -+ writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); -+} -+#endif -+ -+void clock_init_uart(void) -+{ -+ struct sunxi_ccm_reg *const ccm = -+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ -+#if CONFIG_CONS_INDEX < 5 -+ /* uart clock source is apb2 */ -+ writel(APB2_CLK_SRC_OSC24M| -+ APB2_CLK_RATE_N_1| -+ APB2_CLK_RATE_M(1), -+ &ccm->apb2_div); -+ -+ /* open the clock for uart */ -+ setbits_le32(&ccm->apb2_gate, -+ CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT+CONFIG_CONS_INDEX-1)); -+ -+ /* deassert uart reset */ -+ setbits_le32(&ccm->apb2_reset_cfg, -+ 1 << (APB2_RESET_UART_SHIFT+CONFIG_CONS_INDEX-1)); -+#else -+ /* enable R_PIO and R_UART clocks, and de-assert resets */ -+ prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART); -+#endif -+ -+ /* Dup with clock_init_safe(), drop once sun6i SPL support lands */ -+ writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); -+} -+ -+int clock_twi_onoff(int port, int state) -+{ -+ struct sunxi_ccm_reg *const ccm = -+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ -+ if (port > 3) -+ return -1; -+ -+ /* set the apb clock gate for twi */ -+ if (state) -+ setbits_le32(&ccm->apb2_gate, -+ CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port)); -+ else -+ clrbits_le32(&ccm->apb2_gate, -+ CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port)); -+ -+ return 0; -+} -+ -+unsigned int clock_get_pll6(void) -+{ -+ struct sunxi_ccm_reg *const ccm = -+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ uint32_t rval = readl(&ccm->pll6_cfg); -+ int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1; -+ int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1; -+ return 24000000 * n * k / 2; -+} -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/cmd_watchdog.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/cmd_watchdog.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/cmd_watchdog.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/cmd_watchdog.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,29 @@ -+/* -+ * (C) Copyright 2012 Henrik Nordstrom -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+ -+int do_sunxi_watchdog(cmd_tbl_t *cmdtp, int flag, int argc, const char *argv[]) -+{ -+ unsigned long interval; -+ -+ if (argc < 2) { -+ printf("usage: watchdog seconds\n"); -+ printf("over %d to disable watchdog\n", WDT_MAX_TIMEOUT); -+ } -+ interval = simple_strtoul(argv[1], NULL, 10); -+ watchdog_set((unsigned int)interval); -+ -+ return 0; -+} -+ -+U_BOOT_CMD( -+ watchdog, 2, 1, do_sunxi_watchdog, -+ "Set watchdog [0 - 16]. [17+} disables", -+ "" -+); -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/config.mk u-boot-sunxi/arch/arm/cpu/armv7/sunxi/config.mk ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/config.mk 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/config.mk 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,8 @@ -+# Build a combined spl + u-boot image -+ifdef CONFIG_SPL -+ifndef CONFIG_SPL_BUILD -+ifndef CONFIG_SPL_FEL -+ALL-y += u-boot-sunxi-with-spl.bin -+endif -+endif -+endif -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/cpu_info.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/cpu_info.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/cpu_info.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/cpu_info.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,38 @@ -+/* -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+ -+#ifdef CONFIG_DISPLAY_CPUINFO -+int print_cpuinfo(void) -+{ -+#ifdef CONFIG_SUN4I -+ puts("CPU: Allwinner A10 (SUN4I)\n"); -+#elif defined CONFIG_SUN5I -+ u32 val = readl(SUNXI_SID_BASE + 0x08); -+ switch ((val >> 12) & 0xf) { -+ case 0: puts("CPU: Allwinner A12 (SUN5I)\n"); break; -+ case 3: puts("CPU: Allwinner A13 (SUN5I)\n"); break; -+ case 7: puts("CPU: Allwinner A10s (SUN5I)\n"); break; -+ default: puts("CPU: Allwinner A1X (SUN5I)\n"); -+ } -+#elif defined CONFIG_SUN6I -+ puts("CPU: Allwinner A31 (SUN6I)\n"); -+#elif defined CONFIG_SUN7I -+ puts("CPU: Allwinner A20 (SUN7I)\n"); -+#elif defined CONFIG_SUN8I -+ puts("CPU: Allwinner A23 (SUN8I)\n"); -+#else -+#warning Please update cpu_info.c with correct CPU information -+ puts("CPU: SUNXI Family\n"); -+#endif -+ return 0; -+} -+#endif -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/dram.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/dram.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/dram.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/dram.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,693 @@ -+/* -+ * sunxi DRAM controller initialization -+ * (C) Copyright 2012 Henrik Nordstrom -+ * (C) Copyright 2013 Luke Kenneth Casson Leighton -+ * -+ * Based on sun4i Linux kernel sources mach-sunxi/pm/standby/dram*.c -+ * and earlier U-Boot Allwiner A10 SPL work -+ * -+ * (C) Copyright 2007-2012 -+ * Allwinner Technology Co., Ltd. -+ * Berg Xing -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+/* -+ * Unfortunately the only documentation we have on the sun7i DRAM -+ * controller is Allwinner boot0 + boot1 code, and that code uses -+ * magic numbers & shifts with no explanations. Hence this code is -+ * rather undocumented and full of magic. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define CPU_CFG_CHIP_VER(n) ((n) << 6) -+#define CPU_CFG_CHIP_VER_MASK CPU_CFG_CHIP_VER(0x3) -+#define CPU_CFG_CHIP_REV_A 0x0 -+#define CPU_CFG_CHIP_REV_C1 0x1 -+#define CPU_CFG_CHIP_REV_C2 0x2 -+#define CPU_CFG_CHIP_REV_B 0x3 -+ -+/* -+ * Wait up to 1s for mask to be clear in given reg. -+ */ -+static void await_completion(u32 *reg, u32 mask) -+{ -+ unsigned long tmo = timer_get_us() + 1000000; -+ -+ while (readl(reg) & mask) { -+ if (timer_get_us() > tmo) -+ panic("Timeout initialising DRAM\n"); -+ } -+} -+ -+static void mctl_ddr3_reset(void) -+{ -+ struct sunxi_dram_reg *dram = -+ (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -+ -+#ifdef CONFIG_SUN4I -+ struct sunxi_timer_reg *timer = -+ (struct sunxi_timer_reg *)SUNXI_TIMER_BASE; -+ u32 reg_val; -+ -+ writel(0, &timer->cpu_cfg); -+ reg_val = readl(&timer->cpu_cfg); -+ -+ if ((reg_val & CPU_CFG_CHIP_VER_MASK) != -+ CPU_CFG_CHIP_VER(CPU_CFG_CHIP_REV_A)) { -+ setbits_le32(&dram->mcr, DRAM_MCR_RESET); -+ udelay(2); -+ clrbits_le32(&dram->mcr, DRAM_MCR_RESET); -+ } else -+#endif -+ { -+ clrbits_le32(&dram->mcr, DRAM_MCR_RESET); -+ udelay(2); -+ setbits_le32(&dram->mcr, DRAM_MCR_RESET); -+ } -+} -+ -+static void mctl_set_drive(void) -+{ -+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -+ -+#ifdef CONFIG_SUN7I -+ clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28), -+#else -+ clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3), -+#endif -+ DRAM_MCR_MODE_EN(0x3) | -+ 0xffc); -+} -+ -+static void mctl_itm_disable(void) -+{ -+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -+ -+ clrsetbits_le32(&dram->ccr, DRAM_CCR_INIT, DRAM_CCR_ITM_OFF); -+} -+ -+static void mctl_itm_enable(void) -+{ -+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -+ -+ clrbits_le32(&dram->ccr, DRAM_CCR_ITM_OFF); -+} -+ -+static void mctl_enable_dll0(u32 phase) -+{ -+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -+ -+ clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, -+ ((phase >> 16) & 0x3f) << 6); -+ clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET, DRAM_DLLCR_DISABLE); -+ udelay(2); -+ -+ clrbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET | DRAM_DLLCR_DISABLE); -+ udelay(22); -+ -+ clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_DISABLE, DRAM_DLLCR_NRESET); -+ udelay(22); -+} -+ -+/* -+ * Note: This differs from pm/standby in that it checks the bus width -+ */ -+static void mctl_enable_dllx(u32 phase) -+{ -+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -+ u32 i, n, bus_width; -+ -+ bus_width = readl(&dram->dcr); -+ -+ if ((bus_width & DRAM_DCR_BUS_WIDTH_MASK) == -+ DRAM_DCR_BUS_WIDTH(DRAM_DCR_BUS_WIDTH_32BIT)) -+ n = DRAM_DCR_NR_DLLCR_32BIT; -+ else -+ n = DRAM_DCR_NR_DLLCR_16BIT; -+ -+ for (i = 1; i < n; i++) { -+ clrsetbits_le32(&dram->dllcr[i], 0xf << 14, -+ (phase & 0xf) << 14); -+ clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET, -+ DRAM_DLLCR_DISABLE); -+ phase >>= 4; -+ } -+ udelay(2); -+ -+ for (i = 1; i < n; i++) -+ clrbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET | -+ DRAM_DLLCR_DISABLE); -+ udelay(22); -+ -+ for (i = 1; i < n; i++) -+ clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_DISABLE, -+ DRAM_DLLCR_NRESET); -+ udelay(22); -+} -+ -+static u32 hpcr_value[32] = { -+#ifdef CONFIG_SUN5I -+ 0, 0, 0, 0, -+ 0, 0, 0, 0, -+ 0, 0, 0, 0, -+ 0, 0, 0, 0, -+ 0x1031, 0x1031, 0x0735, 0x1035, -+ 0x1035, 0x0731, 0x1031, 0, -+ 0x0301, 0x0301, 0x0301, 0x0301, -+ 0x0301, 0x0301, 0x0301, 0 -+#endif -+#ifdef CONFIG_SUN4I -+ 0x0301, 0x0301, 0x0301, 0x0301, -+ 0x0301, 0x0301, 0, 0, -+ 0, 0, 0, 0, -+ 0, 0, 0, 0, -+ 0x1031, 0x1031, 0x0735, 0x5031, -+ 0x1035, 0x0731, 0x1031, 0x0735, -+ 0x1035, 0x1031, 0x0731, 0x1035, -+ 0x1031, 0x0301, 0x0301, 0x0731 -+#endif -+#ifdef CONFIG_SUN7I -+ 0x0301, 0x0301, 0x0301, 0x0301, -+ 0x0301, 0x0301, 0x0301, 0x0301, -+ 0, 0, 0, 0, -+ 0, 0, 0, 0, -+ 0x1031, 0x1031, 0x0735, 0x1035, -+ 0x1035, 0x0731, 0x1031, 0x0735, -+ 0x1035, 0x1031, 0x0731, 0x1035, -+ 0x0001, 0x1031, 0, 0x1031 -+ /* last row differs from boot0 source table -+ * 0x1031, 0x0301, 0x0301, 0x0731 -+ * but boot0 code skips #28 and #30, and sets #29 and #31 to the -+ * value from #28 entry (0x1031) -+ */ -+#endif -+}; -+ -+static void mctl_configure_hostport(void) -+{ -+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -+ u32 i; -+ -+ for (i = 0; i < 32; i++) -+ writel(hpcr_value[i], &dram->hpcr[i]); -+} -+ -+static void mctl_setup_dram_clock(u32 clk) -+{ -+ u32 reg_val; -+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ -+ /* setup DRAM PLL */ -+ reg_val = readl(&ccm->pll5_cfg); -+ reg_val &= ~CCM_PLL5_CTRL_M_MASK; /* set M to 0 (x1) */ -+ reg_val &= ~CCM_PLL5_CTRL_K_MASK; /* set K to 0 (x1) */ -+ reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */ -+ reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */ -+ if (clk >= 540 && clk < 552) { -+ /* dram = 540MHz, pll5p = 540MHz */ -+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); -+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); -+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15)); -+ reg_val |= CCM_PLL5_CTRL_P(1); -+ } else if (clk >= 512 && clk < 528) { -+ /* dram = 512MHz, pll5p = 384MHz */ -+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3)); -+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4)); -+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16)); -+ reg_val |= CCM_PLL5_CTRL_P(2); -+ } else if (clk >= 496 && clk < 504) { -+ /* dram = 496MHz, pll5p = 372MHz */ -+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3)); -+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2)); -+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31)); -+ reg_val |= CCM_PLL5_CTRL_P(2); -+ } else if (clk >= 468 && clk < 480) { -+ /* dram = 468MHz, pll5p = 468MHz */ -+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); -+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); -+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13)); -+ reg_val |= CCM_PLL5_CTRL_P(1); -+ } else if (clk >= 396 && clk < 408) { -+ /* dram = 396MHz, pll5p = 396MHz */ -+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); -+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); -+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11)); -+ reg_val |= CCM_PLL5_CTRL_P(1); -+ } else { -+ /* any other frequency that is a multiple of 24 */ -+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); -+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2)); -+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24)); -+ reg_val |= CCM_PLL5_CTRL_P(CCM_PLL5_CTRL_P_X(2)); -+ } -+ reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN; /* PLL VCO Gain off */ -+ reg_val |= CCM_PLL5_CTRL_EN; /* PLL On */ -+ writel(reg_val, &ccm->pll5_cfg); -+ udelay(5500); -+ -+ setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK); -+ -+#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I) -+ /* reset GPS */ -+ clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE); -+ setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS); -+ udelay(1); -+ clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS); -+#endif -+ -+#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) -+ /* setup MBUS clock */ -+ reg_val = CCM_MBUS_CTRL_GATE | -+#if defined(CONFIG_SUN7I) && defined(CONFIG_FAST_MBUS) -+ CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) | -+ CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) | -+ CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(3)); -+#elif defined(CONFIG_SUN7I) && !defined(CONFIG_FAST_MBUS) -+ CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) | -+ CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(2)) | -+ CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2)); -+#else /* defined(CONFIG_SUN5I) */ -+ CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL5) | -+ CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) | -+ CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2)); -+#endif -+ writel(reg_val, &ccm->mbus_clk_cfg); -+#endif -+ -+ /* -+ * open DRAMC AHB & DLL register clock -+ * close it first -+ */ -+#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) -+ clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL); -+#else -+ clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM); -+#endif -+ udelay(22); -+ -+ /* then open it */ -+#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) -+ setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL); -+#else -+ setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM); -+#endif -+ udelay(22); -+} -+ -+static int dramc_scan_readpipe(void) -+{ -+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -+ u32 reg_val; -+ -+ /* data training trigger */ -+#ifdef CONFIG_SUN7I -+ clrbits_le32(&dram->csr, DRAM_CSR_FAILED); -+#endif -+ setbits_le32(&dram->ccr, DRAM_CCR_DATA_TRAINING); -+ -+ /* check whether data training process has completed */ -+ await_completion(&dram->ccr, DRAM_CCR_DATA_TRAINING); -+ -+ /* check data training result */ -+ reg_val = readl(&dram->csr); -+ if (reg_val & DRAM_CSR_FAILED) -+ return -1; -+ -+ return 0; -+} -+ -+static int dramc_scan_dll_para(void) -+{ -+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -+ const u32 dqs_dly[7] = {0x3, 0x2, 0x1, 0x0, 0xe, 0xd, 0xc}; -+ const u32 clk_dly[15] = {0x07, 0x06, 0x05, 0x04, 0x03, -+ 0x02, 0x01, 0x00, 0x08, 0x10, -+ 0x18, 0x20, 0x28, 0x30, 0x38}; -+ u32 clk_dqs_count[15]; -+ u32 dqs_i, clk_i, cr_i; -+ u32 max_val, min_val; -+ u32 dqs_index, clk_index; -+ -+ /* Find DQS_DLY Pass Count for every CLK_DLY */ -+ for (clk_i = 0; clk_i < 15; clk_i++) { -+ clk_dqs_count[clk_i] = 0; -+ clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, -+ (clk_dly[clk_i] & 0x3f) << 6); -+ for (dqs_i = 0; dqs_i < 7; dqs_i++) { -+ for (cr_i = 1; cr_i < 5; cr_i++) { -+ clrsetbits_le32(&dram->dllcr[cr_i], -+ 0x4f << 14, -+ (dqs_dly[dqs_i] & 0x4f) << 14); -+ } -+ udelay(2); -+ if (dramc_scan_readpipe() == 0) -+ clk_dqs_count[clk_i]++; -+ } -+ } -+ /* Test DQS_DLY Pass Count for every CLK_DLY from up to down */ -+ for (dqs_i = 15; dqs_i > 0; dqs_i--) { -+ max_val = 15; -+ min_val = 15; -+ for (clk_i = 0; clk_i < 15; clk_i++) { -+ if (clk_dqs_count[clk_i] == dqs_i) { -+ max_val = clk_i; -+ if (min_val == 15) -+ min_val = clk_i; -+ } -+ } -+ if (max_val < 15) -+ break; -+ } -+ -+ /* Check if Find a CLK_DLY failed */ -+ if (!dqs_i) -+ goto fail; -+ -+ /* Find the middle index of CLK_DLY */ -+ clk_index = (max_val + min_val) >> 1; -+ if ((max_val == (15 - 1)) && (min_val > 0)) -+ /* if CLK_DLY[MCTL_CLK_DLY_COUNT] is very good, then the middle -+ * value can be more close to the max_val -+ */ -+ clk_index = (15 + clk_index) >> 1; -+ else if ((max_val < (15 - 1)) && (min_val == 0)) -+ /* if CLK_DLY[0] is very good, then the middle value can be more -+ * close to the min_val -+ */ -+ clk_index >>= 1; -+ if (clk_dqs_count[clk_index] < dqs_i) -+ clk_index = min_val; -+ -+ /* Find the middle index of DQS_DLY for the CLK_DLY got above, and Scan -+ * read pipe again -+ */ -+ clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, -+ (clk_dly[clk_index] & 0x3f) << 6); -+ max_val = 7; -+ min_val = 7; -+ for (dqs_i = 0; dqs_i < 7; dqs_i++) { -+ clk_dqs_count[dqs_i] = 0; -+ for (cr_i = 1; cr_i < 5; cr_i++) { -+ clrsetbits_le32(&dram->dllcr[cr_i], -+ 0x4f << 14, -+ (dqs_dly[dqs_i] & 0x4f) << 14); -+ } -+ udelay(2); -+ if (dramc_scan_readpipe() == 0) { -+ clk_dqs_count[dqs_i] = 1; -+ max_val = dqs_i; -+ if (min_val == 7) -+ min_val = dqs_i; -+ } -+ } -+ -+ if (max_val < 7) { -+ dqs_index = (max_val + min_val) >> 1; -+ if ((max_val == (7-1)) && (min_val > 0)) -+ dqs_index = (7 + dqs_index) >> 1; -+ else if ((max_val < (7-1)) && (min_val == 0)) -+ dqs_index >>= 1; -+ if (!clk_dqs_count[dqs_index]) -+ dqs_index = min_val; -+ for (cr_i = 1; cr_i < 5; cr_i++) { -+ clrsetbits_le32(&dram->dllcr[cr_i], -+ 0x4f << 14, -+ (dqs_dly[dqs_index] & 0x4f) << 14); -+ } -+ udelay(2); -+ return dramc_scan_readpipe(); -+ } -+ -+fail: -+ clrbits_le32(&dram->dllcr[0], 0x3f << 6); -+ for (cr_i = 1; cr_i < 5; cr_i++) -+ clrbits_le32(&dram->dllcr[cr_i], 0x4f << 14); -+ udelay(2); -+ -+ return dramc_scan_readpipe(); -+} -+ -+static void dramc_clock_output_en(u32 on) -+{ -+#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) -+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -+ -+ if (on) -+ setbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT); -+ else -+ clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT); -+#endif -+#ifdef CONFIG_SUN4I -+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ if (on) -+ setbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT); -+ else -+ clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT); -+#endif -+} -+ -+static const u16 tRFC_table[2][6] = { -+ /* 256Mb 512Mb 1Gb 2Gb 4Gb 8Gb */ -+ /* DDR2 75ns 105ns 127.5ns 195ns 327.5ns invalid */ -+ { 77, 108, 131, 200, 336, 336 }, -+ /* DDR3 invalid 90ns 110ns 160ns 300ns 350ns */ -+ { 93, 93, 113, 164, 308, 359 } -+}; -+ -+static void dramc_set_autorefresh_cycle(u32 clk, u32 type, u32 density) -+{ -+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -+ u32 tRFC, tREFI; -+ -+ tRFC = (tRFC_table[type][density] * clk + 1023) >> 10; -+ tREFI = (7987 * clk) >> 10; /* <= 7.8us */ -+ -+ writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr); -+} -+ -+unsigned long dramc_init(struct dram_para *para) -+{ -+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -+ u32 reg_val; -+ u32 density; -+ int ret_val; -+ -+ /* check input dram parameter structure */ -+ if (!para) -+ return 0; -+ -+ /* setup DRAM relative clock */ -+ mctl_setup_dram_clock(para->clock); -+ -+#ifdef CONFIG_SUN5I -+ /* Disable any pad power save control */ -+ writel(0, &dram->ppwrsctl); -+#endif -+ -+ /* reset external DRAM */ -+#ifndef CONFIG_SUN7I -+ mctl_ddr3_reset(); -+#endif -+ mctl_set_drive(); -+ -+ /* dram clock off */ -+ dramc_clock_output_en(0); -+ -+#ifdef CONFIG_SUN4I -+ /* select dram controller 1 */ -+ writel(DRAM_CSEL_MAGIC, &dram->csel); -+#endif -+ -+ mctl_itm_disable(); -+ mctl_enable_dll0(para->tpr3); -+ -+ /* configure external DRAM */ -+ reg_val = 0x0; -+ if (para->type == DRAM_MEMORY_TYPE_DDR3) -+ reg_val |= DRAM_DCR_TYPE_DDR3; -+ reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3); -+ -+ if (para->density == 256) -+ density = DRAM_DCR_CHIP_DENSITY_256M; -+ else if (para->density == 512) -+ density = DRAM_DCR_CHIP_DENSITY_512M; -+ else if (para->density == 1024) -+ density = DRAM_DCR_CHIP_DENSITY_1024M; -+ else if (para->density == 2048) -+ density = DRAM_DCR_CHIP_DENSITY_2048M; -+ else if (para->density == 4096) -+ density = DRAM_DCR_CHIP_DENSITY_4096M; -+ else if (para->density == 8192) -+ density = DRAM_DCR_CHIP_DENSITY_8192M; -+ else -+ density = DRAM_DCR_CHIP_DENSITY_256M; -+ -+ reg_val |= DRAM_DCR_CHIP_DENSITY(density); -+ reg_val |= DRAM_DCR_BUS_WIDTH((para->bus_width >> 3) - 1); -+ reg_val |= DRAM_DCR_RANK_SEL(para->rank_num - 1); -+ reg_val |= DRAM_DCR_CMD_RANK_ALL; -+ reg_val |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE); -+ writel(reg_val, &dram->dcr); -+ -+#ifdef CONFIG_SUN7I -+ setbits_le32(&dram->zqcr1, (0x1 << 24) | (0x1 << 1)); -+ if (para->tpr4 & 0x2) -+ clrsetbits_le32(&dram->zqcr1, (0x1 << 24), (0x1 << 1)); -+ dramc_clock_output_en(1); -+#endif -+ -+#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)) -+ /* set odt impendance divide ratio */ -+ reg_val = ((para->zq) >> 8) & 0xfffff; -+ reg_val |= ((para->zq) & 0xff) << 20; -+ reg_val |= (para->zq) & 0xf0000000; -+ writel(reg_val, &dram->zqcr0); -+#endif -+ -+#ifdef CONFIG_SUN7I -+ /* Set CKE Delay to about 1ms */ -+ setbits_le32(&dram->idcr, 0x1ffff); -+#endif -+ -+#ifdef CONFIG_SUN7I -+ if ((readl(&dram->ppwrsctl) & 0x1) != 0x1) -+ mctl_ddr3_reset(); -+ else -+ setbits_le32(&dram->mcr, DRAM_MCR_RESET); -+#else -+ /* dram clock on */ -+ dramc_clock_output_en(1); -+#endif -+ -+ udelay(1); -+ -+ await_completion(&dram->ccr, DRAM_CCR_INIT); -+ -+ mctl_enable_dllx(para->tpr3); -+ -+#ifdef CONFIG_SUN4I -+ /* set odt impedance divide ratio */ -+ reg_val = ((para->zq) >> 8) & 0xfffff; -+ reg_val |= ((para->zq) & 0xff) << 20; -+ reg_val |= (para->zq) & 0xf0000000; -+ writel(reg_val, &dram->zqcr0); -+#endif -+ -+#ifdef CONFIG_SUN4I -+ /* set I/O configure register */ -+ reg_val = 0x00cc0000; -+ reg_val |= (para->odt_en) & 0x3; -+ reg_val |= ((para->odt_en) & 0x3) << 30; -+ writel(reg_val, &dram->iocr); -+#endif -+ -+ /* set refresh period */ -+ dramc_set_autorefresh_cycle(para->clock, para->type - 2, density); -+ -+ /* set timing parameters */ -+ writel(para->tpr0, &dram->tpr0); -+ writel(para->tpr1, &dram->tpr1); -+ writel(para->tpr2, &dram->tpr2); -+ -+ if (para->type == DRAM_MEMORY_TYPE_DDR3) { -+ reg_val = DRAM_MR_BURST_LENGTH(0x0); -+#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)) -+ reg_val |= DRAM_MR_POWER_DOWN; -+#endif -+ reg_val |= DRAM_MR_CAS_LAT(para->cas - 4); -+ reg_val |= DRAM_MR_WRITE_RECOVERY(0x5); -+ } else if (para->type == DRAM_MEMORY_TYPE_DDR2) { -+ reg_val = DRAM_MR_BURST_LENGTH(0x2); -+ reg_val |= DRAM_MR_CAS_LAT(para->cas); -+ reg_val |= DRAM_MR_WRITE_RECOVERY(0x5); -+ } -+ writel(reg_val, &dram->mr); -+ -+ writel(para->emr1, &dram->emr); -+ writel(para->emr2, &dram->emr2); -+ writel(para->emr3, &dram->emr3); -+ -+ /* set DQS window mode */ -+ clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE); -+ -+#ifdef CONFIG_SUN7I -+ /* Command rate timing mode 2T & 1T */ -+ if (para->tpr4 & 0x1) -+ setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T); -+#endif -+ /* reset external DRAM */ -+ setbits_le32(&dram->ccr, DRAM_CCR_INIT); -+ await_completion(&dram->ccr, DRAM_CCR_INIT); -+ -+#ifdef CONFIG_SUN7I -+ /* setup zq calibration manual */ -+ reg_val = readl(&dram->ppwrsctl); -+ if ((reg_val & 0x1) == 1) { -+ /* super_standby_flag = 1 */ -+ -+ reg_val = readl(0x01c20c00 + 0x120); /* rtc */ -+ reg_val &= 0x000fffff; -+ reg_val |= 0x17b00000; -+ writel(reg_val, &dram->zqcr0); -+ -+ /* exit self-refresh state */ -+ clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27); -+ /* check whether command has been executed */ -+ await_completion(&dram->dcr, 0x1 << 31); -+ -+ udelay(2); -+ -+ /* dram pad hold off */ -+ setbits_le32(&dram->ppwrsctl, 0x16510000); -+ -+ await_completion(&dram->ppwrsctl, 0x1); -+ -+ /* exit self-refresh state */ -+ clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27); -+ -+ /* check whether command has been executed */ -+ await_completion(&dram->dcr, 0x1 << 31); -+ -+ udelay(2); -+ -+ /* issue a refresh command */ -+ clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x13 << 27); -+ await_completion(&dram->dcr, 0x1 << 31); -+ -+ udelay(2); -+ } -+#endif -+ -+ /* scan read pipe value */ -+ mctl_itm_enable(); -+ if (para->tpr3 & (0x1 << 31)) { -+ ret_val = dramc_scan_dll_para(); -+ if (ret_val == 0) -+ para->tpr3 = -+ (((readl(&dram->dllcr[0]) >> 6) & 0x3f) << 16) | -+ (((readl(&dram->dllcr[1]) >> 14) & 0xf) << 0) | -+ (((readl(&dram->dllcr[2]) >> 14) & 0xf) << 4) | -+ (((readl(&dram->dllcr[3]) >> 14) & 0xf) << 8) | -+ (((readl(&dram->dllcr[4]) >> 14) & 0xf) << 12 -+ ); -+ } else { -+ ret_val = dramc_scan_readpipe(); -+ } -+ -+ if (ret_val < 0) -+ return 0; -+ -+ /* configure all host port */ -+ mctl_configure_hostport(); -+ -+ return get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE); -+} -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/early_print.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/early_print.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/early_print.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/early_print.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,55 @@ -+/* -+ * (C) Copyright 2007-2012 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * Early uart print for debugging. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static int uart_initialized = 0; -+ -+#if CONFIG_CONS_INDEX < 5 -+#define UART CONFIG_CONS_INDEX-1 -+#else -+/* SUNXI_R_UART_BASE */ -+#define UART 2922 -+#endif -+ -+void uart_init(void) { -+ -+ /* select dll dlh */ -+ writel(UART_LCR_DLAB, UART_LCR(UART)); -+ /* set baudrate */ -+ writel(0, UART_DLH(UART)); -+ writel(BAUD_115200, UART_DLL(UART)); -+ /* set line control */ -+ writel(LC_8_N_1, UART_LCR(UART)); -+ -+ uart_initialized = 1; -+} -+ -+#define TX_READY (readl(UART_LSR(UART)) & UART_LSR_TEMT) -+ -+void uart_putc(char c) { -+ -+ while (!TX_READY) -+ ; -+ writel(c, UART_THR(UART)); -+} -+ -+void uart_puts(const char *s) { -+ -+ while (*s) -+ uart_putc(*s++); -+} -+ -+ -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/Makefile u-boot-sunxi/arch/arm/cpu/armv7/sunxi/Makefile ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/Makefile 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,44 @@ -+# -+# (C) Copyright 2012 Henrik Nordstrom -+# -+# Based on some other Makefile -+# (C) Copyright 2000-2003 -+# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+# -+# SPDX-License-Identifier: GPL-2.0+ -+# -+obj-y += timer.o -+obj-y += board.o -+obj-y += clock.o -+obj-y += pinmux.o -+obj-y += watchdog.o -+obj-$(CONFIG_SUN6I) += prcm.o -+obj-$(CONFIG_SUN8I) += prcm.o -+obj-$(CONFIG_SUN6I) += p2wi.o -+obj-$(CONFIG_SUN4I) += clock_sun4i.o -+obj-$(CONFIG_SUN5I) += clock_sun4i.o -+obj-$(CONFIG_SUN6I) += clock_sun6i.o -+obj-$(CONFIG_SUN7I) += clock_sun4i.o -+obj-$(CONFIG_SUN8I) += clock_sun6i.o -+ifdef DEBUG -+obj-y += early_print.o -+endif -+obj-$(CONFIG_BOARD_POSTCLK_INIT) += postclk_init.o -+obj-$(CONFIG_SYS_SECONDARY_ON) += secondary_init.o -+obj-$(CONFIG_SYS_SECONDARY_ON) += smp.o -+ -+ifndef CONFIG_SPL_BUILD -+obj-y += cpu_info.o -+ifdef CONFIG_CMD_WATCHDOG -+obj-$(CONFIG_CMD_WATCHDOG) += cmd_watchdog.o -+endif -+endif -+ -+ifdef CONFIG_SPL_BUILD -+obj-$(CONFIG_SUN4I) += dram.o -+obj-$(CONFIG_SUN5I) += dram.o -+obj-$(CONFIG_SUN7I) += dram.o -+ifdef CONFIG_SPL_FEL -+obj-y += start.o -+endif -+endif -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/p2wi.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/p2wi.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/p2wi.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/p2wi.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,120 @@ -+/* -+ * Sunxi A31 Power Management Unit -+ * -+ * (C) Copyright 2013 Oliver Schinagl -+ * http://linux-sunxi.org -+ * -+ * Based on sun6i sources and earlier U-Boot Allwiner A10 SPL work -+ * -+ * (C) Copyright 2006-2013 -+ * Allwinner Technology Co., Ltd. -+ * Berg Xing -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+void p2wi_init(void) -+{ -+ struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE; -+ -+ /* Enable p2wi and PIO clk, and de-assert their resets */ -+ prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI); -+ -+ sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUNXI_GPL0_R_P2WI_SCK); -+ sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUNXI_GPL1_R_P2WI_SDA); -+ -+ /* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */ -+ writel(P2WI_CTRL_RESET, &p2wi->ctrl); -+ sdelay(0x100); -+ writel(P2WI_CC_SDA_OUT_DELAY(1) | P2WI_CC_CLK_DIV(8), -+ &p2wi->cc); -+} -+ -+int p2wi_set_pmu_address(u8 slave_addr, u8 ctrl_reg, u8 init_data) -+{ -+ struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE; -+ int i; -+ -+ writel(P2WI_PM_DEV_ADDR(slave_addr) | -+ P2WI_PM_CTRL_ADDR(ctrl_reg) | -+ P2WI_PM_INIT_DATA(init_data) | -+ P2WI_PM_INIT_SEND, -+ &p2wi->pm); -+ for (i = 0xffffff; i != 0; i--) -+ if (!(readl(&p2wi->pm) & P2WI_PM_INIT_SEND)) -+ break; -+ if (readl(&p2wi->pm) & P2WI_PM_INIT_SEND) -+ return -EFAULT; -+ -+ return 0; -+} -+ -+int p2wi_read(const u8 addr, u8 *data) -+{ -+ struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE; -+ int i, ret = 0; -+ u8 reg; -+ -+ writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0); -+ writel(P2WI_DATA_NUM_BYTES(1) | -+ P2WI_DATA_NUM_BYTES_READ, &p2wi->numbytes); -+ writel(P2WI_STAT_TRANS_DONE, &p2wi->status); -+ writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl); -+ -+ for (i = 0xffffff; i != 0; i--) { -+ reg = readl(&p2wi->status); -+ if (reg & P2WI_STAT_TRANS_ERR) { -+ ret = -EIO; -+ break; -+ } -+ if (reg & P2WI_STAT_TRANS_DONE) -+ break; -+ } -+ -+ if (i == 0) -+ ret = -ETIME; -+ -+ *data = readl(&p2wi->data0) & P2WI_DATA_BYTE_1_MASK; -+ writel(reg, &p2wi->status); /* Clear status bits */ -+ return ret; -+} -+ -+int p2wi_write(const u8 addr, u8 data) -+{ -+ struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE; -+ int i, ret = 0; -+ u8 reg; -+ -+ writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0); -+ writel(P2WI_DATA_BYTE_1(data), &p2wi->data0); -+ writel(P2WI_DATA_NUM_BYTES(1), &p2wi->numbytes); -+ writel(P2WI_STAT_TRANS_DONE, &p2wi->status); -+ writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl); -+ -+ for (i = 0xffffff; i != 0; i--) { -+ reg = readl(&p2wi->status); -+ if (reg & P2WI_STAT_TRANS_ERR) { -+ ret = -EIO; -+ break; -+ } -+ if (reg & P2WI_STAT_TRANS_DONE) -+ break; -+ } -+ -+ if (i == 0) -+ ret = -ETIME; -+ -+ writel(reg, &p2wi->status); /* Clear status bits */ -+ return ret; -+} -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/pinmux.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/pinmux.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/pinmux.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/pinmux.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,61 @@ -+/* -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+ -+int sunxi_gpio_set_cfgpin(u32 pin, u32 val) -+{ -+ u32 bank = GPIO_BANK(pin); -+ u32 index = GPIO_CFG_INDEX(pin); -+ u32 offset = GPIO_CFG_OFFSET(pin); -+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank); -+ -+ clrsetbits_le32(&pio->cfg[0] + index, 0xf << offset, val << offset); -+ -+ return 0; -+} -+ -+int sunxi_gpio_get_cfgpin(u32 pin) -+{ -+ u32 cfg; -+ u32 bank = GPIO_BANK(pin); -+ u32 index = GPIO_CFG_INDEX(pin); -+ u32 offset = GPIO_CFG_OFFSET(pin); -+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank); -+ -+ cfg = readl(&pio->cfg[0] + index); -+ cfg >>= offset; -+ -+ return cfg & 0xf; -+} -+ -+int sunxi_gpio_set_drv(u32 pin, u32 val) -+{ -+ u32 bank = GPIO_BANK(pin); -+ u32 index = GPIO_DRV_INDEX(pin); -+ u32 offset = GPIO_DRV_OFFSET(pin); -+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank); -+ -+ clrsetbits_le32(&pio->drv[0] + index, 0x3 << offset, val << offset); -+ -+ return 0; -+} -+ -+int sunxi_gpio_set_pull(u32 pin, u32 val) -+{ -+ u32 bank = GPIO_BANK(pin); -+ u32 index = GPIO_PULL_INDEX(pin); -+ u32 offset = GPIO_PULL_OFFSET(pin); -+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank); -+ -+ clrsetbits_le32(&pio->pull[0] + index, 0x3 << offset, val << offset); -+ -+ return 0; -+} -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/postclk_init.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/postclk_init.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/postclk_init.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/postclk_init.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,20 @@ -+/* -+ * (C) Copyright 2013 -+ * Carl van Schaik -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#if defined(CONFIG_SYS_SECONDARY_ON) -+#include -+#endif -+ -+ -+int board_postclk_init(void) -+{ -+#if defined(CONFIG_SYS_SECONDARY_ON) -+ startup_secondaries(); -+#endif -+ return 0; -+} -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/prcm.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/prcm.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/prcm.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/prcm.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,35 @@ -+/* -+ * Sunxi A31 Power Management Unit -+ * -+ * (C) Copyright 2013 Oliver Schinagl -+ * http://linux-sunxi.org -+ * -+ * Based on sun6i sources and earlier U-Boot Allwiner A10 SPL work -+ * -+ * (C) Copyright 2006-2013 -+ * Allwinner Technology Co., Ltd. -+ * Berg Xing -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* APB0 clock gate and reset bit offsets are the same. */ -+void prcm_apb0_enable(u32 flags) -+{ -+ struct sunxi_prcm_reg *prcm = -+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; -+ -+ /* open the clock for module */ -+ setbits_le32(&prcm->apb0_gate, flags); -+ -+ /* deassert reset for module */ -+ setbits_le32(&prcm->apb0_reset, flags); -+} -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/secondary_init.S u-boot-sunxi/arch/arm/cpu/armv7/sunxi/secondary_init.S ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/secondary_init.S 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/secondary_init.S 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,31 @@ -+/* -+ * A lowlevel_init function that sets up the stack to call a C function to -+ * perform further init. -+ * -+ * (C) Copyright 2013 -+ * Carl van Schaik -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+#include -+#include -+#include -+ -+ENTRY(secondary_init) -+ /* Get cpu number : r5 */ -+ mrc p15, 0, r5, c0, c0, 5 -+ and r5, r5, #0xff -+ -+ /* -+ * Setup a secondary stack, each core gets 128 bytes. -+ */ -+ ldr sp, =secondary_stack -+ mov r0, #0x80 -+ add sp, sp, r0, lsl r5 -+ -+ /* -+ * Jump to C -+ */ -+ bl secondary_start -+ENDPROC(secondary_init) -+ -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/smp.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/smp.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/smp.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/smp.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,80 @@ -+/* -+ * (C) Copyright 2013 -+ * Carl van Schaik -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+ -+/* Right now we assume only a single secondary as in sun7i */ -+#if defined(CONFIG_SUN7I) -+#define NUM_CORES 2 -+#else -+#error unsupported SoC -+#endif -+ -+static void secondary_pen(void) -+{ -+ struct sunxi_cpucfg *cpucfg = (struct sunxi_cpucfg *)SUNXI_CPUCFG_BASE; -+ -+ while (1) { -+ __asm__ __volatile__("wfe" ::: "memory"); -+ -+ unsigned long boot_addr = readl(&cpucfg->boot_addr); -+ -+ __asm__ __volatile__( -+ "mov r14, %0 \n" -+ "bx r14 \n" -+ : : "r" (boot_addr) -+ ); -+ }; -+} -+ -+u32 secondary_stack[32*(NUM_CORES-1)]; -+ -+void secondary_start(void) -+{ -+ secondary_pen(); -+} -+ -+/* Power on secondaries */ -+void startup_secondaries(void) -+{ -+ int i; -+ struct sunxi_cpucfg *cpucfg = (struct sunxi_cpucfg *)SUNXI_CPUCFG_BASE; -+ -+ writel((u32)secondary_init, &cpucfg->boot_addr); -+ -+ for (i = 1; i < NUM_CORES; i++) { -+ /* Assert CPU reset just in case */ -+ writel(CPU_RESET_SET, &cpucfg->cpu[i].reset_ctrl); -+ /* Ensure CPU reset also invalidates L1 caches */ -+ clrbits_le32(&cpucfg->general_ctrl, -+ GENERAL_CTRL_NO_L1_RESET_CPU(i)); -+ /* Lock CPU */ -+ clrbits_le32(&cpucfg->debug1_ctrl, 1 << i); -+ -+ /* Ramp up power to CPU1 */ -+ assert(i == 1); -+ u32 j = 0xff << 1; -+ do { -+ j = j >> 1; -+ writel(j, &cpucfg->cpu1_power_clamp); -+ } while (j != 0); -+ -+ udelay(10*1000); /* 10ms */ -+ -+ clrbits_le32(&cpucfg->cpu1_power_off, 1); -+ /* Release CPU reset */ -+ writel(CPU_RESET_CLEAR, &cpucfg->cpu[i].reset_ctrl); -+ -+ /* Unlock CPU */ -+ setbits_le32(&cpucfg->debug1_ctrl, 1 << i); -+ -+ printf("Secondary CPU%d power-on\n", i); -+ } -+} -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/start.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/start.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/start.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/start.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1 @@ -+/* Intentionally empty. Only needed to get FEL SPL link line right */ -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/timer.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/timer.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/timer.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/timer.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,113 @@ -+/* -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+#define TIMER_MODE (0x0 << 7) /* continuous mode */ -+#define TIMER_DIV (0x0 << 4) /* pre scale 1 */ -+#define TIMER_SRC (0x1 << 2) /* osc24m */ -+#define TIMER_RELOAD (0x1 << 1) /* reload internal value */ -+#define TIMER_EN (0x1 << 0) /* enable timer */ -+ -+#define TIMER_CLOCK (24 * 1000 * 1000) -+#define COUNT_TO_USEC(x) ((x) / 24) -+#define USEC_TO_COUNT(x) ((x) * 24) -+#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ) -+#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ) -+ -+#define TIMER_LOAD_VAL 0xffffffff -+ -+#define TIMER_NUM 0 /* we use timer 0 */ -+ -+/* read the 32-bit timer */ -+static ulong read_timer(void) -+{ -+ struct sunxi_timer_reg *timers = -+ (struct sunxi_timer_reg *)SUNXI_TIMER_BASE; -+ struct sunxi_timer *timer = &timers->timer[TIMER_NUM]; -+ -+ /* -+ * The hardware timer counts down, therefore we invert to -+ * produce an incrementing timer. -+ */ -+ return ~readl(&timer->val); -+} -+ -+/* init timer register */ -+int timer_init(void) -+{ -+ struct sunxi_timer_reg *timers = -+ (struct sunxi_timer_reg *)SUNXI_TIMER_BASE; -+ struct sunxi_timer *timer = &timers->timer[TIMER_NUM]; -+ writel(TIMER_LOAD_VAL, &timer->inter); -+ writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN, -+ &timer->ctl); -+ -+ return 0; -+} -+ -+/* timer without interrupts */ -+ulong get_timer(ulong base) -+{ -+ return get_timer_masked() - base; -+} -+ -+ulong get_timer_masked(void) -+{ -+ /* current tick value */ -+ ulong now = TICKS_TO_HZ(read_timer()); -+ -+ if (now >= gd->arch.lastinc) /* normal (non rollover) */ -+ gd->arch.tbl += (now - gd->arch.lastinc); -+ else { -+ /* rollover */ -+ gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) -+ - gd->arch.lastinc) + now; -+ } -+ gd->arch.lastinc = now; -+ -+ return gd->arch.tbl; -+} -+ -+/* delay x useconds */ -+void __udelay(unsigned long usec) -+{ -+ long tmo = USEC_TO_COUNT(usec); -+ ulong now, last = read_timer(); -+ -+ while (tmo > 0) { -+ now = read_timer(); -+ if (now > last) /* normal (non rollover) */ -+ tmo -= now - last; -+ else /* rollover */ -+ tmo -= TIMER_LOAD_VAL - last + now; -+ last = now; -+ } -+} -+ -+/* -+ * This function is derived from PowerPC code (read timebase as long long). -+ * On ARM it just returns the timer value. -+ */ -+unsigned long long get_ticks(void) -+{ -+ return get_timer(0); -+} -+ -+/* -+ * This function is derived from PowerPC code (timebase clock frequency). -+ * On ARM it returns the number of timer ticks per second. -+ */ -+ulong get_tbclk(void) -+{ -+ return CONFIG_SYS_HZ; -+} -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds u-boot-sunxi/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,77 @@ -+/* -+ * (C) Copyright 2013 -+ * Henrik Nordstrom -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+OUTPUT_ARCH(arm) -+ENTRY(s_init) -+SECTIONS -+{ -+ . = 0x00002000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ *(.text.s_init) -+ *(.text*) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } -+ -+ . = ALIGN(4); -+ .data : { -+ *(.data*) -+ } -+ -+ . = ALIGN(4); -+ . = .; -+ -+ . = ALIGN(4); -+ .rel.dyn : { -+ __rel_dyn_start = .; -+ *(.rel*) -+ __rel_dyn_end = .; -+ } -+ -+ .dynsym : { -+ __dynsym_start = .; -+ *(.dynsym) -+ } -+ -+ . = ALIGN(4); -+ .note.gnu.build-id : -+ { -+ *(.note.gnu.build-id) -+ } -+ _end = .; -+ -+ . = ALIGN(4096); -+ .mmutable : { -+ *(.mmutable) -+ } -+ -+ .bss_start __rel_dyn_start (OVERLAY) : { -+ KEEP(*(.__bss_start)); -+ __bss_base = .; -+ } -+ -+ .bss __bss_base (OVERLAY) : { -+ *(.bss*) -+ . = ALIGN(4); -+ __bss_limit = .; -+ } -+ -+ .bss_end __bss_limit (OVERLAY) : { -+ KEEP(*(.__bss_end)); -+ } -+ -+ /DISCARD/ : { *(.dynstr*) } -+ /DISCARD/ : { *(.dynamic*) } -+ /DISCARD/ : { *(.plt*) } -+ /DISCARD/ : { *(.interp*) } -+ /DISCARD/ : { *(.gnu*) } -+ /DISCARD/ : { *(.note*) } -+} -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds u-boot-sunxi/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,52 @@ -+/* -+ * (C) Copyright 2012 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * Based on omap-common/u-boot-spl.lds: -+ * -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, -+ * -+ * (C) Copyright 2010 -+ * Texas Instruments, -+ * Aneesh V -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ -+ LENGTH = CONFIG_SPL_MAX_SIZE } -+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ -+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE } -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ .text : -+ { -+ __start = .; -+ arch/arm/cpu/armv7/start.o (.text) -+ *(.text*) -+ } > .sram -+ -+ . = ALIGN(4); -+ .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram -+ -+ . = ALIGN(4); -+ .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram -+ -+ . = ALIGN(4); -+ __image_copy_end = .; -+ _end = .; -+ -+ .bss : -+ { -+ . = ALIGN(4); -+ __bss_start = .; -+ *(.bss*) -+ . = ALIGN(4); -+ __bss_end = .; -+ } > .sdram -+} -diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/watchdog.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/watchdog.c ---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/watchdog.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/watchdog.c 2014-09-06 16:58:35.317953141 +0200 -@@ -0,0 +1,83 @@ -+/* -+ * Watchdog driver for the Allwinner sunxi platform. -+ * Copyright (C) 2013 Oliver Schinagl -+ * http://www.linux-sunxi.org/ -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+ -+#define WDT_CTRL_RESTART (0x1 << 0) -+#define WDT_CTRL_KEY (0x0a57 << 1) -+ -+#define WDT_MODE_EN (0x1 << 0) -+#define WDT_MODE_RESET_EN (0x1 << 1) -+#define WDT_MAX_TIMEOUT 16 -+#define WDT_MODE_TIMEOUT(n) \ -+ (wdt_timeout_map[(n) < WDT_MAX_TIMEOUT ? (n) : WDT_MAX_TIMEOUT] << 3) -+ -+ -+/* -+ * Watchdog timeout table. The sunxi cores only use 4 bits for the watchdog as -+ * set by the table below. The gaps are filled by rounding up to the next -+ * second up. -+ */ -+const unsigned int wdt_timeout_map[] = { -+ [0] = 0b0000, /* 0.5s*/ -+ [1] = 0b0001, /* 1s */ -+ [2] = 0b0010, /* 2s */ -+ [3] = 0b0011, /* 3s */ -+ [4] = 0b0100, /* 4s */ -+ [5] = 0b0101, /* 5s */ -+ [6] = 0b0110, /* 6s */ -+ [7] = 0b0111, /* 8s */ -+ [8] = 0b0111, /* 8s */ -+ [9] = 0b1000, /* 10s */ -+ [10] = 0b1000, /* 10s */ -+ [11] = 0b1001, /* 12s */ -+ [12] = 0b1001, /* 12s */ -+ [13] = 0b1010, /* 14s */ -+ [14] = 0b1010, /* 14s */ -+ [15] = 0b1011, /* 16s */ -+ [16] = 0b1011, /* 16s */ -+}; -+ -+ -+void watchdog_reset(void) -+{ -+ static const struct sunxi_wdog *wdog = -+ &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog; -+ -+ writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl); -+} -+ -+void watchdog_set(int timeout) -+{ -+ static struct sunxi_wdog *const wdog = -+ &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog; -+ -+ /* Set timeout, reset & enable */ -+ if (timeout >= 0) { -+ writel(WDT_MODE_TIMEOUT(timeout) | -+ WDT_MODE_RESET_EN | WDT_MODE_EN, -+ &wdog->mode); -+ } else { -+ writel(0, &wdog->mode); -+ } -+ watchdog_reset(); -+} -+ -+void watchdog_init(void) -+{ -+#ifdef CONFIG_WATCHDOG -+ watchdog_set(WDT_MAX_TIMEOUT); -+#else -+ watchdog_set(WDT_OFF); /* no timeout */ -+#endif -+} -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,33 @@ -+/* -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_CLOCK_H -+#define _SUNXI_CLOCK_H -+ -+#include -+ -+#define CLK_GATE_OPEN 0x1 -+#define CLK_GATE_CLOSE 0x0 -+ -+/* clock control module regs definition */ -+#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) -+#include -+#else -+#include -+#endif -+ -+#ifndef __ASSEMBLY__ -+int clock_init(void); -+int clock_twi_onoff(int port, int state); -+void clock_set_pll1(unsigned int hz); -+unsigned int clock_get_pll6(void); -+void clock_init_safe(void); -+void clock_init_uart(void); -+#endif -+ -+#endif /* _SUNXI_CLOCK_H */ -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock_sun4i.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock_sun4i.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock_sun4i.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock_sun4i.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,256 @@ -+/* -+ * sun4i, sun5i and sun7i clock register definitions -+ * -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_CLOCK_SUN4I_H -+#define _SUNXI_CLOCK_SUN4I_H -+ -+struct sunxi_ccm_reg { -+ u32 pll1_cfg; /* 0x00 pll1 control */ -+ u32 pll1_tun; /* 0x04 pll1 tuning */ -+ u32 pll2_cfg; /* 0x08 pll2 control */ -+ u32 pll2_tun; /* 0x0c pll2 tuning */ -+ u32 pll3_cfg; /* 0x10 pll3 control */ -+ u8 res0[0x4]; -+ u32 pll4_cfg; /* 0x18 pll4 control */ -+ u8 res1[0x4]; -+ u32 pll5_cfg; /* 0x20 pll5 control */ -+ u32 pll5_tun; /* 0x24 pll5 tuning */ -+ u32 pll6_cfg; /* 0x28 pll6 control */ -+ u32 pll6_tun; /* 0x2c pll6 tuning */ -+ u32 pll7_cfg; /* 0x30 pll7 control */ -+ u32 pll1_tun2; /* 0x34 pll5 tuning2 */ -+ u8 res2[0x4]; -+ u32 pll5_tun2; /* 0x3c pll5 tuning2 */ -+ u8 res3[0xc]; -+ u32 pll_lock_dbg; /* 0x4c pll lock time debug */ -+ u32 osc24m_cfg; /* 0x50 osc24m control */ -+ u32 cpu_ahb_apb0_cfg; /* 0x54 cpu,ahb and apb0 divide ratio */ -+ u32 apb1_clk_div_cfg; /* 0x58 apb1 clock dividor */ -+ u32 axi_gate; /* 0x5c axi module clock gating */ -+ u32 ahb_gate0; /* 0x60 ahb module clock gating 0 */ -+ u32 ahb_gate1; /* 0x64 ahb module clock gating 1 */ -+ u32 apb0_gate; /* 0x68 apb0 module clock gating */ -+ u32 apb1_gate; /* 0x6c apb1 module clock gating */ -+ u8 res4[0x10]; -+ u32 nand_sclk_cfg; /* 0x80 nand sub clock control */ -+ u32 ms_sclk_cfg; /* 0x84 memory stick sub clock control */ -+ u32 sd0_clk_cfg; /* 0x88 sd0 clock control */ -+ u32 sd1_clk_cfg; /* 0x8c sd1 clock control */ -+ u32 sd2_clk_cfg; /* 0x90 sd2 clock control */ -+ u32 sd3_clk_cfg; /* 0x94 sd3 clock control */ -+ u32 ts_clk_cfg; /* 0x98 transport stream clock control */ -+ u32 ss_clk_cfg; /* 0x9c */ -+ u32 spi0_clk_cfg; /* 0xa0 */ -+ u32 spi1_clk_cfg; /* 0xa4 */ -+ u32 spi2_clk_cfg; /* 0xa8 */ -+ u32 pata_clk_cfg; /* 0xac */ -+ u32 ir0_clk_cfg; /* 0xb0 */ -+ u32 ir1_clk_cfg; /* 0xb4 */ -+ u32 iis_clk_cfg; /* 0xb8 */ -+ u32 ac97_clk_cfg; /* 0xbc */ -+ u32 spdif_clk_cfg; /* 0xc0 */ -+ u32 keypad_clk_cfg; /* 0xc4 */ -+ u32 sata_clk_cfg; /* 0xc8 */ -+ u32 usb_clk_cfg; /* 0xcc */ -+ u32 gps_clk_cfg; /* 0xd0 */ -+ u32 spi3_clk_cfg; /* 0xd4 */ -+ u8 res5[0x28]; -+ u32 dram_clk_cfg; /* 0x100 */ -+ u32 be0_clk_cfg; /* 0x104 */ -+ u32 be1_clk_cfg; /* 0x108 */ -+ u32 fe0_clk_cfg; /* 0x10c */ -+ u32 fe1_clk_cfg; /* 0x110 */ -+ u32 mp_clk_cfg; /* 0x114 */ -+ u32 lcd0_ch0_clk_cfg; /* 0x118 */ -+ u32 lcd1_ch0_clk_cfg; /* 0x11c */ -+ u32 csi_isp_clk_cfg; /* 0x120 */ -+ u8 res6[0x4]; -+ u32 tvd_clk_reg; /* 0x128 */ -+ u32 lcd0_ch1_clk_cfg; /* 0x12c */ -+ u32 lcd1_ch1_clk_cfg; /* 0x130 */ -+ u32 csi0_clk_cfg; /* 0x134 */ -+ u32 csi1_clk_cfg; /* 0x138 */ -+ u32 ve_clk_cfg; /* 0x13c */ -+ u32 audio_codec_clk_cfg; /* 0x140 */ -+ u32 avs_clk_cfg; /* 0x144 */ -+ u32 ace_clk_cfg; /* 0x148 */ -+ u32 lvds_clk_cfg; /* 0x14c */ -+ u32 hdmi_clk_cfg; /* 0x150 */ -+ u32 mali_clk_cfg; /* 0x154 */ -+ u8 res7[0x4]; -+ u32 mbus_clk_cfg; /* 0x15c */ -+ u8 res8[0x4]; -+ u32 gmac_clk_cfg; /* 0x164 */ -+}; -+ -+/* apb1 bit field */ -+#define APB1_CLK_SRC_OSC24M (0x0 << 24) -+#define APB1_CLK_SRC_PLL6 (0x1 << 24) -+#define APB1_CLK_SRC_LOSC (0x2 << 24) -+#define APB1_CLK_SRC_MASK (0x3 << 24) -+#define APB1_CLK_RATE_N_1 (0x0 << 16) -+#define APB1_CLK_RATE_N_2 (0x1 << 16) -+#define APB1_CLK_RATE_N_4 (0x2 << 16) -+#define APB1_CLK_RATE_N_8 (0x3 << 16) -+#define APB1_CLK_RATE_N_MASK (3 << 16) -+#define APB1_CLK_RATE_M(m) (((m)-1) << 0) -+#define APB1_CLK_RATE_M_MASK (0x1f << 0) -+ -+/* apb1 gate field */ -+#define APB1_GATE_UART_SHIFT (16) -+#define APB1_GATE_UART_MASK (0xff << APB1_GATE_UART_SHIFT) -+#define APB1_GATE_TWI_SHIFT (0) -+#define APB1_GATE_TWI_MASK (0xf << APB1_GATE_TWI_SHIFT) -+ -+/* clock divide */ -+#define AXI_DIV_SHIFT (0) -+#define AXI_DIV_1 0 -+#define AXI_DIV_2 1 -+#define AXI_DIV_3 2 -+#define AXI_DIV_4 3 -+#define AHB_DIV_SHIFT (4) -+#define AHB_DIV_1 0 -+#define AHB_DIV_2 1 -+#define AHB_DIV_4 2 -+#define AHB_DIV_8 3 -+#define APB0_DIV_SHIFT (8) -+#define APB0_DIV_1 0 -+#define APB0_DIV_2 1 -+#define APB0_DIV_4 2 -+#define APB0_DIV_8 3 -+#define CPU_CLK_SRC_SHIFT (16) -+#define CPU_CLK_SRC_OSC24M 1 -+#define CPU_CLK_SRC_PLL1 2 -+ -+#define CCM_PLL1_CFG_ENABLE_SHIFT 31 -+#define CCM_PLL1_CFG_VCO_RST_SHIFT 30 -+#define CCM_PLL1_CFG_VCO_BIAS_SHIFT 26 -+#define CCM_PLL1_CFG_PLL4_EXCH_SHIFT 25 -+#define CCM_PLL1_CFG_BIAS_CUR_SHIFT 20 -+#define CCM_PLL1_CFG_DIVP_SHIFT 16 -+#define CCM_PLL1_CFG_LCK_TMR_SHIFT 13 -+#define CCM_PLL1_CFG_FACTOR_N_SHIFT 8 -+#define CCM_PLL1_CFG_FACTOR_K_SHIFT 4 -+#define CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT 3 -+#define CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT 2 -+#define CCM_PLL1_CFG_FACTOR_M_SHIFT 0 -+ -+#define PLL1_CFG_DEFAULT 0xa1005000 -+ -+#define PLL6_CFG_DEFAULT 0xa1009911 -+ -+/* nand clock */ -+#define NAND_CLK_SRC_OSC24 0 -+#define NAND_CLK_DIV_N 0 -+#define NAND_CLK_DIV_M 0 -+ -+/* gps clock */ -+#define GPS_SCLK_GATING_OFF 0 -+#define GPS_RESET 0 -+ -+/* ahb clock gate bit offset */ -+#define AHB_GATE_OFFSET_GPS 26 -+#define AHB_GATE_OFFSET_SATA 25 -+#define AHB_GATE_OFFSET_PATA 24 -+#define AHB_GATE_OFFSET_SPI3 23 -+#define AHB_GATE_OFFSET_SPI2 22 -+#define AHB_GATE_OFFSET_SPI1 21 -+#define AHB_GATE_OFFSET_SPI0 20 -+#define AHB_GATE_OFFSET_TS0 18 -+#define AHB_GATE_OFFSET_EMAC 17 -+#define AHB_GATE_OFFSET_ACE 16 -+#define AHB_GATE_OFFSET_DLL 15 -+#define AHB_GATE_OFFSET_SDRAM 14 -+#define AHB_GATE_OFFSET_NAND 13 -+#define AHB_GATE_OFFSET_MS 12 -+#define AHB_GATE_OFFSET_MMC3 11 -+#define AHB_GATE_OFFSET_MMC2 10 -+#define AHB_GATE_OFFSET_MMC1 9 -+#define AHB_GATE_OFFSET_MMC0 8 -+#define AHB_GATE_OFFSET_MMC(n) (AHB_GATE_OFFSET_MMC0 + (n)) -+#define AHB_GATE_OFFSET_BIST 7 -+#define AHB_GATE_OFFSET_DMA 6 -+#define AHB_GATE_OFFSET_SS 5 -+#define AHB_GATE_OFFSET_USB_OHCI1 4 -+#define AHB_GATE_OFFSET_USB_EHCI1 3 -+#define AHB_GATE_OFFSET_USB_OHCI0 2 -+#define AHB_GATE_OFFSET_USB_EHCI0 1 -+#define AHB_GATE_OFFSET_USB 0 -+ -+/* ahb clock gate bit offset (second register) */ -+#define AHB_GATE_OFFSET_GMAC 17 -+ -+#define CCM_AHB_GATE_GPS (0x1 << 26) -+#define CCM_AHB_GATE_SDRAM (0x1 << 14) -+#define CCM_AHB_GATE_DLL (0x1 << 15) -+#define CCM_AHB_GATE_ACE (0x1 << 16) -+ -+#define CCM_PLL5_CTRL_M(n) (((n) & 0x3) << 0) -+#define CCM_PLL5_CTRL_M_MASK CCM_PLL5_CTRL_M(0x3) -+#define CCM_PLL5_CTRL_M_X(n) ((n) - 1) -+#define CCM_PLL5_CTRL_M1(n) (((n) & 0x3) << 2) -+#define CCM_PLL5_CTRL_M1_MASK CCM_PLL5_CTRL_M1(0x3) -+#define CCM_PLL5_CTRL_M1_X(n) ((n) - 1) -+#define CCM_PLL5_CTRL_K(n) (((n) & 0x3) << 4) -+#define CCM_PLL5_CTRL_K_MASK CCM_PLL5_CTRL_K(0x3) -+#define CCM_PLL5_CTRL_K_X(n) ((n) - 1) -+#define CCM_PLL5_CTRL_LDO (0x1 << 7) -+#define CCM_PLL5_CTRL_N(n) (((n) & 0x1f) << 8) -+#define CCM_PLL5_CTRL_N_MASK CCM_PLL5_CTRL_N(0x1f) -+#define CCM_PLL5_CTRL_N_X(n) (n) -+#define CCM_PLL5_CTRL_P(n) (((n) & 0x3) << 16) -+#define CCM_PLL5_CTRL_P_MASK CCM_PLL5_CTRL_P(0x3) -+#define CCM_PLL5_CTRL_P_X(n) ((n) - 1) -+#define CCM_PLL5_CTRL_BW (0x1 << 18) -+#define CCM_PLL5_CTRL_VCO_GAIN (0x1 << 19) -+#define CCM_PLL5_CTRL_BIAS(n) (((n) & 0x1f) << 20) -+#define CCM_PLL5_CTRL_BIAS_MASK CCM_PLL5_CTRL_BIAS(0x1f) -+#define CCM_PLL5_CTRL_BIAS_X(n) ((n) - 1) -+#define CCM_PLL5_CTRL_VCO_BIAS (0x1 << 25) -+#define CCM_PLL5_CTRL_DDR_CLK (0x1 << 29) -+#define CCM_PLL5_CTRL_BYPASS (0x1 << 30) -+#define CCM_PLL5_CTRL_EN (0x1 << 31) -+ -+#define CCM_PLL6_CTRL_N_SHIFT 8 -+#define CCM_PLL6_CTRL_N_MASK (0x1f << CCM_PLL6_CTRL_N_SHIFT) -+#define CCM_PLL6_CTRL_K_SHIFT 4 -+#define CCM_PLL6_CTRL_K_MASK (0x3 << CCM_PLL6_CTRL_K_SHIFT) -+ -+#define CCM_GPS_CTRL_RESET (0x1 << 0) -+#define CCM_GPS_CTRL_GATE (0x1 << 1) -+ -+#define CCM_DRAM_CTRL_DCLK_OUT (0x1 << 15) -+ -+#define CCM_MBUS_CTRL_M(n) (((n) & 0xf) << 0) -+#define CCM_MBUS_CTRL_M_MASK CCM_MBUS_CTRL_M(0xf) -+#define CCM_MBUS_CTRL_M_X(n) ((n) - 1) -+#define CCM_MBUS_CTRL_N(n) (((n) & 0xf) << 16) -+#define CCM_MBUS_CTRL_N_MASK CCM_MBUS_CTRL_N(0xf) -+#define CCM_MBUS_CTRL_N_X(n) (((n) >> 3) ? 3 : (((n) >> 2) ? 2 : (((n) >> 1) ? 1 : 0))) -+#define CCM_MBUS_CTRL_CLK_SRC(n) (((n) & 0x3) << 24) -+#define CCM_MBUS_CTRL_CLK_SRC_MASK CCM_MBUS_CTRL_CLK_SRC(0x3) -+#define CCM_MBUS_CTRL_CLK_SRC_HOSC 0x0 -+#define CCM_MBUS_CTRL_CLK_SRC_PLL6 0x1 -+#define CCM_MBUS_CTRL_CLK_SRC_PLL5 0x2 -+#define CCM_MBUS_CTRL_GATE (0x1 << 31) -+ -+#define CCM_MMC_CTRL_OSCM24 (0x0 << 24) -+#define CCM_MMC_CTRL_PLL6 (0x1 << 24) -+#define CCM_MMC_CTRL_PLL5 (0x2 << 24) -+ -+#define CCM_MMC_CTRL_ENABLE (0x1 << 31) -+ -+#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0 -+#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1 -+#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 -+#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2) -+#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2) -+ -+#endif /* _SUNXI_CLOCK_SUN4I_H */ -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock_sun6i.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock_sun6i.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock_sun6i.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock_sun6i.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,205 @@ -+/* -+ * sun6i clock register definitions -+ * -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_CLOCK_SUN6I_H -+#define _SUNXI_CLOCK_SUN6I_H -+ -+struct sunxi_ccm_reg { -+ u32 pll1_cfg; /* 0x00 pll1 control */ -+ u32 reserved0; -+ u32 pll2_cfg; /* 0x08 pll2 control */ -+ u32 reserved1; -+ u32 pll3_cfg; /* 0x10 pll3 control */ -+ u32 reserved2; -+ u32 pll4_cfg; /* 0x18 pll4 control */ -+ u32 reserved3; -+ u32 pll5_cfg; /* 0x20 pll5 control */ -+ u32 reserved4; -+ u32 pll6_cfg; /* 0x28 pll6 control */ -+ u32 reserved5; -+ u32 pll7_cfg; /* 0x30 pll7 control */ -+ u32 reserved6; -+ u32 pll8_cfg; /* 0x38 pll8 control */ -+ u32 reserved7; -+ u32 mipi_pll_cfg; /* 0x40 MIPI pll control */ -+ u32 pll9_cfg; /* 0x44 pll9 control */ -+ u32 pll10_cfg; /* 0x48 pll10 control */ -+ u32 reserved8; -+ u32 cpu_axi_cfg; /* 0x50 CPU/AXI divide ratio */ -+ u32 ahb1_apb1_div; /* 0x54 AHB1/APB1 divide ratio */ -+ u32 apb2_div; /* 0x58 APB2 divide ratio */ -+ u32 axi_gate; /* 0x5c axi module clock gating */ -+ u32 ahb_gate0; /* 0x60 ahb module clock gating 0 */ -+ u32 ahb_gate1; /* 0x64 ahb module clock gating 1 */ -+ u32 apb1_gate; /* 0x68 apb1 module clock gating */ -+ u32 apb2_gate; /* 0x6c apb2 module clock gating */ -+ u32 reserved9[4]; -+ u32 nand0_clk_cfg; /* 0x80 nand0 clock control */ -+ u32 nand1_clk_cfg; /* 0x84 nand1 clock control */ -+ u32 sd0_clk_cfg; /* 0x88 sd0 clock control */ -+ u32 sd1_clk_cfg; /* 0x8c sd1 clock control */ -+ u32 sd2_clk_cfg; /* 0x90 sd2 clock control */ -+ u32 sd3_clk_cfg; /* 0x94 sd3 clock control */ -+ u32 ts_clk_cfg; /* 0x98 transport stream clock control */ -+ u32 ss_clk_cfg; /* 0x9c security system clock control */ -+ u32 spi0_clk_cfg; /* 0xa0 spi0 clock control */ -+ u32 spi1_clk_cfg; /* 0xa4 spi1 clock control */ -+ u32 spi2_clk_cfg; /* 0xa8 spi2 clock control */ -+ u32 spi3_clk_cfg; /* 0xac spi3 clock control */ -+ u32 i2s0_clk_cfg; /* 0xb0 I2S0 clock control*/ -+ u32 i2s1_clk_cfg; /* 0xb4 I2S1 clock control */ -+ u32 reserved10[2]; -+ u32 spdif_clk_cfg; /* 0xc0 SPDIF clock control */ -+ u32 reserved11[2]; -+ u32 usb_clk_cfg; /* 0xcc USB clock control */ -+ u32 gmac_clk_cfg; /* 0xd0 GMAC clock control */ -+ u32 reserved12[7]; -+ u32 mdfs_clk_cfg; /* 0xf0 MDFS clock control */ -+ u32 dram_clk_cfg; /* 0xf4 DRAM configuration clock control */ -+ u32 reserved13[2]; -+ u32 dram_clk_gate; /* 0x100 DRAM module gating */ -+ u32 be0_clk_cfg; /* 0x104 BE0 module clock */ -+ u32 be1_clk_cfg; /* 0x108 BE1 module clock */ -+ u32 fe0_clk_cfg; /* 0x10c FE0 module clock */ -+ u32 fe1_clk_cfg; /* 0x110 FE1 module clock */ -+ u32 mp_clk_cfg; /* 0x114 MP module clock */ -+ u32 lcd0_ch0_clk_cfg; /* 0x118 LCD0 CH0 module clock */ -+ u32 lcd1_ch0_clk_cfg; /* 0x11c LCD1 CH0 module clock */ -+ u32 reserved14[3]; -+ u32 lcd0_ch1_clk_cfg; /* 0x12c LCD0 CH1 module clock */ -+ u32 lcd1_ch1_clk_cfg; /* 0x130 LCD1 CH1 module clock */ -+ u32 csi0_clk_cfg; /* 0x134 CSI0 module clock */ -+ u32 csi1_clk_cfg; /* 0x138 CSI1 module clock */ -+ u32 ve_clk_cfg; /* 0x13c VE module clock */ -+ u32 adda_clk_cfg; /* 0x140 ADDA module clock */ -+ u32 avs_clk_cfg; /* 0x144 AVS module clock */ -+ u32 dmic_clk_cfg; /* 0x148 Digital Mic module clock*/ -+ u32 reserved15; -+ u32 hdmi_clk_cfg; /* 0x150 HDMI module clock */ -+ u32 ps_clk_cfg; /* 0x154 PS module clock */ -+ u32 mtc_clk_cfg; /* 0x158 MTC module clock */ -+ u32 mbus0_clk_cfg; /* 0x15c MBUS0 module clock */ -+ u32 mbus1_clk_cfg; /* 0x160 MBUS1 module clock */ -+ u32 reserved16; -+ u32 mipi_dsi_clk_cfg; /* 0x168 MIPI DSI clock control */ -+ u32 mipi_csi_clk_cfg; /* 0x16c MIPI CSI clock control */ -+ u32 reserved17[4]; -+ u32 iep_drc0_clk_cfg; /* 0x180 IEP DRC0 module clock */ -+ u32 iep_drc1_clk_cfg; /* 0x184 IEP DRC1 module clock */ -+ u32 iep_deu0_clk_cfg; /* 0x188 IEP DEU0 module clock */ -+ u32 iep_deu1_clk_cfg; /* 0x18c IEP DEU1 module clock */ -+ u32 reserved18[4]; -+ u32 gpu_core_clk_cfg; /* 0x1a0 GPU core clock config */ -+ u32 gpu_mem_clk_cfg; /* 0x1a4 GPU memory clock config */ -+ u32 gpu_hyd_clk_cfg; /* 0x1a0 GPU HYD clock config */ -+ u32 reserved19[21]; -+ u32 pll_lock; /* 0x200 PLL Lock Time */ -+ u32 pll1_lock; /* 0x204 PLL1 Lock Time */ -+ u32 reserved20[6]; -+ u32 pll1_bias_cfg; /* 0x220 PLL1 Bias config */ -+ u32 pll2_bias_cfg; /* 0x224 PLL2 Bias config */ -+ u32 pll3_bias_cfg; /* 0x228 PLL3 Bias config */ -+ u32 pll4_bias_cfg; /* 0x22c PLL4 Bias config */ -+ u32 pll5_bias_cfg; /* 0x230 PLL5 Bias config */ -+ u32 pll6_bias_cfg; /* 0x234 PLL6 Bias config */ -+ u32 pll7_bias_cfg; /* 0x238 PLL7 Bias config */ -+ u32 pll8_bias_cfg; /* 0x23c PLL8 Bias config */ -+ u32 mipi_bias_cfg; /* 0x240 MIPI Bias config */ -+ u32 pll9_bias_cfg; /* 0x244 PLL9 Bias config */ -+ u32 pll10_bias_cfg; /* 0x248 PLL10 Bias config */ -+ u32 reserved21[13]; -+ u32 pll1_pattern_cfg; /* 0x280 PLL1 Pattern config */ -+ u32 pll2_pattern_cfg; /* 0x284 PLL2 Pattern config */ -+ u32 pll3_pattern_cfg; /* 0x288 PLL3 Pattern config */ -+ u32 pll4_pattern_cfg; /* 0x28c PLL4 Pattern config */ -+ u32 pll5_pattern_cfg; /* 0x290 PLL5 Pattern config */ -+ u32 pll6_pattern_cfg; /* 0x294 PLL6 Pattern config */ -+ u32 pll7_pattern_cfg; /* 0x298 PLL7 Pattern config */ -+ u32 pll8_pattern_cfg; /* 0x29c PLL8 Pattern config */ -+ u32 mipi_pattern_cfg; /* 0x2a0 MIPI Pattern config */ -+ u32 pll9_pattern_cfg; /* 0x2a4 PLL9 Pattern config */ -+ u32 pll10_pattern_cfg; /* 0x2a8 PLL10 Pattern config */ -+ u32 reserved22[5]; -+ u32 ahb_reset0_cfg; /* 0x2c0 AHB1 Reset 0 config */ -+ u32 ahb_reset1_cfg; /* 0x2c4 AHB1 Reset 1 config */ -+ u32 ahb_reset2_cfg; /* 0x2c8 AHB1 Reset 2 config */ -+ u32 reserved23; -+ u32 apb1_reset_cfg; /* 0x2d0 APB1 Reset config */ -+ u32 reserved24; -+ u32 apb2_reset_cfg; /* 0x2d8 APB2 Reset config */ -+}; -+ -+/* apb2 bit field */ -+#define APB2_CLK_SRC_LOSC (0x0 << 24) -+#define APB2_CLK_SRC_OSC24M (0x1 << 24) -+#define APB2_CLK_SRC_PLL6 (0x2 << 24) -+#define APB2_CLK_SRC_MASK (0x3 << 24) -+#define APB2_CLK_RATE_N_1 (0x0 << 16) -+#define APB2_CLK_RATE_N_2 (0x1 << 16) -+#define APB2_CLK_RATE_N_4 (0x2 << 16) -+#define APB2_CLK_RATE_N_8 (0x3 << 16) -+#define APB2_CLK_RATE_N_MASK (3 << 16) -+#define APB2_CLK_RATE_M(m) (((m)-1) << 0) -+#define APB2_CLK_RATE_M_MASK (0x1f << 0) -+ -+/* apb2 gate field */ -+#define APB2_GATE_UART_SHIFT (16) -+#define APB2_GATE_UART_MASK (0xff << APB2_GATE_UART_SHIFT) -+#define APB2_GATE_TWI_SHIFT (0) -+#define APB2_GATE_TWI_MASK (0xf << APB2_GATE_TWI_SHIFT) -+ -+/* cpu_axi_cfg bits */ -+#define AXI_DIV_SHIFT 0 -+#define ATB_DIV_SHIFT 8 -+#define CPU_CLK_SRC_SHIFT 16 -+ -+#define AXI_DIV_1 0 -+#define AXI_DIV_2 1 -+#define AXI_DIV_3 2 -+#define AXI_DIV_4 3 -+#define ATB_DIV_1 0 -+#define ATB_DIV_2 1 -+#define ATB_DIV_4 2 -+#define CPU_CLK_SRC_OSC24M 1 -+#define CPU_CLK_SRC_PLL1 2 -+ -+#define PLL1_CFG_DEFAULT 0x90011b21 -+ -+#define PLL6_CFG_DEFAULT 0x90041811 -+ -+#define CCM_PLL6_CTRL_N_SHIFT 8 -+#define CCM_PLL6_CTRL_N_MASK (0x1f << CCM_PLL6_CTRL_N_SHIFT) -+#define CCM_PLL6_CTRL_K_SHIFT 4 -+#define CCM_PLL6_CTRL_K_MASK (0x3 << CCM_PLL6_CTRL_K_SHIFT) -+ -+#define AHB_GATE_OFFSET_MMC3 11 -+#define AHB_GATE_OFFSET_MMC2 10 -+#define AHB_GATE_OFFSET_MMC1 9 -+#define AHB_GATE_OFFSET_MMC0 8 -+#define AHB_GATE_OFFSET_MMC(n) (AHB_GATE_OFFSET_MMC0 + (n)) -+ -+#define CCM_MMC_CTRL_OSCM24 (0x0 << 24) -+#define CCM_MMC_CTRL_PLL6 (0x1 << 24) -+ -+#define CCM_MMC_CTRL_ENABLE (0x1 << 31) -+ -+#define AHB_RESET_OFFSET_MMC3 11 -+#define AHB_RESET_OFFSET_MMC2 10 -+#define AHB_RESET_OFFSET_MMC1 9 -+#define AHB_RESET_OFFSET_MMC0 8 -+#define AHB_RESET_OFFSET_MMC(n) (AHB_RESET_OFFSET_MMC0 + (n)) -+ -+/* apb2 reset */ -+#define APB2_RESET_UART_SHIFT (16) -+#define APB2_RESET_UART_MASK (0xff << APB2_RESET_UART_SHIFT) -+#define APB2_RESET_TWI_SHIFT (0) -+#define APB2_RESET_TWI_MASK (0xf << APB2_RESET_TWI_SHIFT) -+ -+#endif /* _SUNXI_CLOCK_SUN6I_H */ -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/cpucfg.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/cpucfg.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/cpucfg.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/cpucfg.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,55 @@ -+/* -+ * (C) Copyright 2013 -+ * Carl van Schaik -+ * -+ * CPU configuration registers for the sun7i (A20). -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_CPUCFG_H_ -+#define _SUNXI_CPUCFG_H_ -+ -+#ifndef __ASSEMBLY__ -+ -+struct sunxi_cpu_ctrl { -+ u32 reset_ctrl; -+ u32 cpu_ctrl; -+ u32 status; -+ u32 _res[13]; -+}; -+ -+#define CPU_RESET_SET 0 -+#define CPU_RESET_CLEAR 3 -+ -+#define CPU_STATUS_SMP (1 << 0) -+#define CPU_STATUS_WFE (1 << 1) -+#define CPU_STATUS_WFI (1 << 2) -+ -+struct sunxi_cpucfg { -+ u32 _res1[16]; /* 0x000 */ -+ struct sunxi_cpu_ctrl cpu[2]; /* 0x040 */ -+ u32 _res2[48]; /* 0x0c0 */ -+ u32 _res3; /* 0x180 */ -+ u32 general_ctrl; /* 0x184 */ -+ u32 _res4[2]; /* 0x188 */ -+ u32 event_input; /* 0x190 */ -+ u32 _res5[4]; /* 0x194 */ -+ u32 boot_addr; /* 0x1a4 - also known as PRIVATE_REG */ -+ u32 _res6[2]; /* 0x1a8 */ -+ u32 cpu1_power_clamp; /* 0x1b0 */ -+ u32 cpu1_power_off; /* 0x1b4 */ -+ u32 _res7[10]; /* 0x1b8 */ -+ u32 debug0_ctrl; /* 0x1e0 */ -+ u32 debug1_ctrl; /* 0x1e4 */ -+}; -+ -+#define GENERAL_CTRL_NO_L1_RESET_CPU(x) (1UL << (x)) -+#define GENERAL_CTRL_NO_L2_AUTO_RESET (1UL << 4) -+#define GENERAL_CTRL_L2_RESET_SET (0UL << 5) -+#define GENERAL_CTRL_L2_RESET_CLEAR (1UL << 5) -+#define GENERAL_CTRL_CFGSDISABLE (1UL << 8) -+ -+#endif /* __ASSEMBLY__ */ -+ -+#endif /* _SUNXI_CPUCFG_H_ */ -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/cpu.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/cpu.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/cpu.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/cpu.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,141 @@ -+/* -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_CPU_H -+#define _SUNXI_CPU_H -+ -+#define SUNXI_SRAM_A1_BASE 0x00000000 -+#define SUNXI_SRAM_A1_SIZE (16 * 1024) /* 16 kiB */ -+ -+#define SUNXI_SRAM_A2_BASE 0x00004000 /* 16 kiB */ -+#define SUNXI_SRAM_A3_BASE 0x00008000 /* 13 kiB */ -+#define SUNXI_SRAM_A4_BASE 0x0000b400 /* 3 kiB */ -+#define SUNXI_SRAM_D_BASE 0x00010000 /* 4 kiB */ -+#define SUNXI_SRAM_B_BASE 0x00020000 /* 64 kiB (secure) */ -+ -+#define SUNXI_SRAMC_BASE 0x01c00000 -+#define SUNXI_DRAMC_BASE 0x01c01000 -+#define SUNXI_DMA_BASE 0x01c02000 -+#define SUNXI_NFC_BASE 0x01c03000 -+#define SUNXI_TS_BASE 0x01c04000 -+#define SUNXI_SPI0_BASE 0x01c05000 -+#define SUNXI_SPI1_BASE 0x01c06000 -+#define SUNXI_MS_BASE 0x01c07000 -+#define SUNXI_TVD_BASE 0x01c08000 -+#define SUNXI_CSI0_BASE 0x01c09000 -+#define SUNXI_TVE0_BASE 0x01c0a000 -+#define SUNXI_EMAC_BASE 0x01c0b000 -+#define SUNXI_LCD0_BASE 0x01c0C000 -+#define SUNXI_LCD1_BASE 0x01c0d000 -+#define SUNXI_VE_BASE 0x01c0e000 -+#define SUNXI_MMC0_BASE 0x01c0f000 -+#define SUNXI_MMC1_BASE 0x01c10000 -+#define SUNXI_MMC2_BASE 0x01c11000 -+#define SUNXI_MMC3_BASE 0x01c12000 -+#define SUNXI_USB0_BASE 0x01c13000 -+#define SUNXI_USB1_BASE 0x01c14000 -+#define SUNXI_SS_BASE 0x01c15000 -+#define SUNXI_HDMI_BASE 0x01c16000 -+#define SUNXI_SPI2_BASE 0x01c17000 -+#define SUNXI_SATA_BASE 0x01c18000 -+#define SUNXI_PATA_BASE 0x01c19000 -+#define SUNXI_ACE_BASE 0x01c1a000 -+#define SUNXI_TVE1_BASE 0x01c1b000 -+#define SUNXI_USB2_BASE 0x01c1c000 -+#define SUNXI_CSI1_BASE 0x01c1d000 -+#define SUNXI_TZASC_BASE 0x01c1e000 -+#define SUNXI_SPI3_BASE 0x01c1f000 -+ -+#define SUNXI_CCM_BASE 0x01c20000 -+#define SUNXI_INTC_BASE 0x01c20400 -+#define SUNXI_PIO_BASE 0x01c20800 -+#define SUNXI_TIMER_BASE 0x01c20c00 -+#define SUNXI_SPDIF_BASE 0x01c21000 -+#define SUNXI_AC97_BASE 0x01c21400 -+#define SUNXI_IR0_BASE 0x01c21800 -+#define SUNXI_IR1_BASE 0x01c21c00 -+ -+#define SUNXI_IIS_BASE 0x01c22400 -+#define SUNXI_LRADC_BASE 0x01c22800 -+#define SUNXI_AD_DA_BASE 0x01c22c00 -+#define SUNXI_KEYPAD_BASE 0x01c23000 -+#define SUNXI_TZPC_BASE 0x01c23400 -+#define SUNXI_SID_BASE 0x01c23800 -+#define SUNXI_SJTAG_BASE 0x01c23c00 -+ -+#define SUNXI_TP_BASE 0x01c25000 -+#define SUNXI_PMU_BASE 0x01c25400 -+#define SUNXI_CPUCFG_BASE 0x01c25c00 /* sun7i only ? */ -+ -+#define SUNXI_UART0_BASE 0x01c28000 -+#define SUNXI_UART1_BASE 0x01c28400 -+#define SUNXI_UART2_BASE 0x01c28800 -+#define SUNXI_UART3_BASE 0x01c28c00 -+#define SUNXI_UART4_BASE 0x01c29000 -+#define SUNXI_UART5_BASE 0x01c29400 -+#define SUNXI_UART6_BASE 0x01c29800 -+#define SUNXI_UART7_BASE 0x01c29c00 -+#define SUNXI_PS2_0_BASE 0x01c2a000 -+#define SUNXI_PS2_1_BASE 0x01c2a400 -+ -+#define SUNXI_TWI0_BASE 0x01c2ac00 -+#define SUNXI_TWI1_BASE 0x01c2b000 -+#define SUNXI_TWI2_BASE 0x01c2b400 -+ -+#define SUNXI_CAN_BASE 0x01c2bc00 -+ -+#define SUNXI_SCR_BASE 0x01c2c400 -+ -+#define SUNXI_GPS_BASE 0x01c30000 -+#define SUNXI_MALI400_BASE 0x01c40000 -+#define SUNXI_GMAC_BASE 0x01c50000 -+ -+#define SUNXI_DRAM_COM_BASE 0x01c62000 -+#define SUNXI_DRAM_CTL_BASE 0x01c63000 -+#define SUNXI_DRAM_PHY_CH1_BASE 0x01c65000 -+#define SUNXI_DRAM_PHY_CH2_BASE 0x01c66000 -+ -+/* module sram */ -+#define SUNXI_SRAM_C_BASE 0x01d00000 -+ -+#define SUNXI_DE_FE0_BASE 0x01e00000 -+#define SUNXI_DE_FE1_BASE 0x01e20000 -+#define SUNXI_DE_BE0_BASE 0x01e60000 -+#define SUNXI_DE_BE1_BASE 0x01e40000 -+#define SUNXI_MP_BASE 0x01e80000 -+#define SUNXI_AVG_BASE 0x01ea0000 -+ -+#define SUNXI_PRCM_BASE 0x01f01400 -+#define SUNXI_R_UART_BASE 0x01f02800 -+#define SUNXI_R_PIO_BASE 0x01f02c00 -+#define SUNXI_P2WI_BASE 0x01f03400 -+ -+/* CoreSight Debug Module */ -+#define SUNXI_CSDM_BASE 0x3f500000 -+ -+#define SUNXI_DDRII_DDRIII_BASE 0x40000000 /* 2 GiB */ -+ -+#define SUNXI_BROM_BASE 0xffff0000 /* 32 kiB */ -+ -+#define SUNXI_CPU_CFG (SUNXI_TIMER_BASE + 0x13c) -+ -+#ifndef __ASSEMBLY__ -+/* boot type */ -+enum sunxi_boot_type_t { -+ SUNXI_BOOT_TYPE_NULL, -+ SUNXI_BOOT_TYPE_MMC0, -+ SUNXI_BOOT_TYPE_NAND, -+ SUNXI_BOOT_TYPE_MMC2, -+ SUNXI_BOOT_TYPE_SPI -+}; -+ -+void sunxi_board_init(void); -+void sunxi_reset(void); -+#endif /* __ASSEMBLY__ */ -+ -+#endif /* _CPU_H */ -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/dram.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/dram.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/dram.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/dram.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,179 @@ -+/* -+ * (C) Copyright 2007-2012 -+ * Allwinner Technology Co., Ltd. -+ * Berg Xing -+ * Tom Cubie -+ * -+ * Sunxi platform dram register definition. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_DRAM_H -+#define _SUNXI_DRAM_H -+ -+#include -+ -+struct sunxi_dram_reg { -+ u32 ccr; /* 0x00 controller configuration register */ -+ u32 dcr; /* 0x04 dram configuration register */ -+ u32 iocr; /* 0x08 i/o configuration register */ -+ u32 csr; /* 0x0c controller status register */ -+ u32 drr; /* 0x10 dram refresh register */ -+ u32 tpr0; /* 0x14 dram timing parameters register 0 */ -+ u32 tpr1; /* 0x18 dram timing parameters register 1 */ -+ u32 tpr2; /* 0x1c dram timing parameters register 2 */ -+ u32 gdllcr; /* 0x20 global dll control register */ -+ u8 res0[0x28]; -+ u32 rslr0; /* 0x4c rank system latency register */ -+ u32 rslr1; /* 0x50 rank system latency register */ -+ u8 res1[0x8]; -+ u32 rdgr0; /* 0x5c rank dqs gating register */ -+ u32 rdgr1; /* 0x60 rank dqs gating register */ -+ u8 res2[0x34]; -+ u32 odtcr; /* 0x98 odt configuration register */ -+ u32 dtr0; /* 0x9c data training register 0 */ -+ u32 dtr1; /* 0xa0 data training register 1 */ -+ u32 dtar; /* 0xa4 data training address register */ -+ u32 zqcr0; /* 0xa8 zq control register 0 */ -+ u32 zqcr1; /* 0xac zq control register 1 */ -+ u32 zqsr; /* 0xb0 zq status register */ -+ u32 idcr; /* 0xb4 initializaton delay configure reg */ -+ u8 res3[0x138]; -+ u32 mr; /* 0x1f0 mode register */ -+ u32 emr; /* 0x1f4 extended mode register */ -+ u32 emr2; /* 0x1f8 extended mode register */ -+ u32 emr3; /* 0x1fc extended mode register */ -+ u32 dllctr; /* 0x200 dll control register */ -+ u32 dllcr[5]; /* 0x204 dll control register 0(byte 0) */ -+ /* 0x208 dll control register 1(byte 1) */ -+ /* 0x20c dll control register 2(byte 2) */ -+ /* 0x210 dll control register 3(byte 3) */ -+ /* 0x214 dll control register 4(byte 4) */ -+ u32 dqtr0; /* 0x218 dq timing register */ -+ u32 dqtr1; /* 0x21c dq timing register */ -+ u32 dqtr2; /* 0x220 dq timing register */ -+ u32 dqtr3; /* 0x224 dq timing register */ -+ u32 dqstr; /* 0x228 dqs timing register */ -+ u32 dqsbtr; /* 0x22c dqsb timing register */ -+ u32 mcr; /* 0x230 mode configure register */ -+ u8 res[0x8]; -+ u32 ppwrsctl; /* 0x23c pad power save control */ -+ u32 apr; /* 0x240 arbiter period register */ -+ u32 pldtr; /* 0x244 priority level data threshold reg */ -+ u8 res5[0x8]; -+ u32 hpcr[32]; /* 0x250 host port configure register */ -+ u8 res6[0x10]; -+ u32 csel; /* 0x2e0 controller select register */ -+}; -+ -+struct dram_para { -+ u32 clock; -+ u32 type; -+ u32 rank_num; -+ u32 density; -+ u32 io_width; -+ u32 bus_width; -+ u32 cas; -+ u32 zq; -+ u32 odt_en; -+ u32 size; -+ u32 tpr0; -+ u32 tpr1; -+ u32 tpr2; -+ u32 tpr3; -+ u32 tpr4; -+ u32 tpr5; -+ u32 emr1; -+ u32 emr2; -+ u32 emr3; -+}; -+ -+#define DRAM_CCR_COMMAND_RATE_1T (0x1 << 5) -+#define DRAM_CCR_DQS_GATE (0x1 << 14) -+#define DRAM_CCR_DQS_DRIFT_COMP (0x1 << 17) -+#define DRAM_CCR_ITM_OFF (0x1 << 28) -+#define DRAM_CCR_DATA_TRAINING (0x1 << 30) -+#define DRAM_CCR_INIT (0x1 << 31) -+ -+#define DRAM_MEMORY_TYPE_DDR1 1 -+#define DRAM_MEMORY_TYPE_DDR2 2 -+#define DRAM_MEMORY_TYPE_DDR3 3 -+#define DRAM_MEMORY_TYPE_LPDDR2 4 -+#define DRAM_MEMORY_TYPE_LPDDR 5 -+#define DRAM_DCR_TYPE (0x1 << 0) -+#define DRAM_DCR_TYPE_DDR2 0x0 -+#define DRAM_DCR_TYPE_DDR3 0x1 -+#define DRAM_DCR_IO_WIDTH(n) (((n) & 0x3) << 1) -+#define DRAM_DCR_IO_WIDTH_MASK DRAM_DCR_IO_WIDTH(0x3) -+#define DRAM_DCR_IO_WIDTH_8BIT 0x0 -+#define DRAM_DCR_IO_WIDTH_16BIT 0x1 -+#define DRAM_DCR_CHIP_DENSITY(n) (((n) & 0x7) << 3) -+#define DRAM_DCR_CHIP_DENSITY_MASK DRAM_DCR_CHIP_DENSITY(0x7) -+#define DRAM_DCR_CHIP_DENSITY_256M 0x0 -+#define DRAM_DCR_CHIP_DENSITY_512M 0x1 -+#define DRAM_DCR_CHIP_DENSITY_1024M 0x2 -+#define DRAM_DCR_CHIP_DENSITY_2048M 0x3 -+#define DRAM_DCR_CHIP_DENSITY_4096M 0x4 -+#define DRAM_DCR_CHIP_DENSITY_8192M 0x5 -+#define DRAM_DCR_BUS_WIDTH(n) (((n) & 0x7) << 6) -+#define DRAM_DCR_BUS_WIDTH_MASK DRAM_DCR_BUS_WIDTH(0x7) -+#define DRAM_DCR_BUS_WIDTH_32BIT 0x3 -+#define DRAM_DCR_BUS_WIDTH_16BIT 0x1 -+#define DRAM_DCR_BUS_WIDTH_8BIT 0x0 -+#define DRAM_DCR_NR_DLLCR_32BIT 5 -+#define DRAM_DCR_NR_DLLCR_16BIT 3 -+#define DRAM_DCR_NR_DLLCR_8BIT 2 -+#define DRAM_DCR_RANK_SEL(n) (((n) & 0x3) << 10) -+#define DRAM_DCR_RANK_SEL_MASK DRAM_DCR_CMD_RANK(0x3) -+#define DRAM_DCR_CMD_RANK_ALL (0x1 << 12) -+#define DRAM_DCR_MODE(n) (((n) & 0x3) << 13) -+#define DRAM_DCR_MODE_MASK DRAM_DCR_MODE(0x3) -+#define DRAM_DCR_MODE_SEQ 0x0 -+#define DRAM_DCR_MODE_INTERLEAVE 0x1 -+ -+#define DRAM_CSR_FAILED (0x1 << 20) -+ -+#define DRAM_DRR_TRFC(n) ((n) & 0xff) -+#define DRAM_DRR_TREFI(n) (((n) & 0xffff) << 8) -+#define DRAM_DRR_BURST(n) ((((n) - 1) & 0xf) << 24) -+ -+#define DRAM_MCR_MODE_NORM(n) (((n) & 0x3) << 0) -+#define DRAM_MCR_MODE_NORM_MASK DRAM_MCR_MOD_NORM(0x3) -+#define DRAM_MCR_MODE_DQ_OUT(n) (((n) & 0x3) << 2) -+#define DRAM_MCR_MODE_DQ_OUT_MASK DRAM_MCR_MODE_DQ_OUT(0x3) -+#define DRAM_MCR_MODE_ADDR_OUT(n) (((n) & 0x3) << 4) -+#define DRAM_MCR_MODE_ADDR_OUT_MASK DRAM_MCR_MODE_ADDR_OUT(0x3) -+#define DRAM_MCR_MODE_DQ_IN_OUT(n) (((n) & 0x3) << 6) -+#define DRAM_MCR_MODE_DQ_IN_OUT_MASK DRAM_MCR_MODE_DQ_IN_OUT(0x3) -+#define DRAM_MCR_MODE_DQ_TURNON_DELAY(n) (((n) & 0x7) << 8) -+#define DRAM_MCR_MODE_DQ_TURNON_DELAY_MASK DRAM_MCR_MODE_DQ_TURNON_DELAY(0x7) -+#define DRAM_MCR_MODE_ADDR_IN (0x1 << 11) -+#define DRAM_MCR_RESET (0x1 << 12) -+#define DRAM_MCR_MODE_EN(n) (((n) & 0x3) << 13) -+#define DRAM_MCR_MODE_EN_MASK DRAM_MCR_MOD_EN(0x3) -+#define DRAM_MCR_DCLK_OUT (0x1 << 16) -+ -+#define DRAM_DLLCR_NRESET (0x1 << 30) -+#define DRAM_DLLCR_DISABLE (0x1 << 31) -+ -+#define DRAM_ZQCR0_IMP_DIV(n) (((n) & 0xff) << 20) -+#define DRAM_ZQCR0_IMP_DIV_MASK DRAM_ZQCR0_IMP_DIV(0xff) -+ -+#define DRAM_IOCR_ODT_EN(n) ((((n) & 0x3) << 30) | ((n) & 0x3) << 0) -+#define DRAM_IOCR_ODT_EN_MASK DRAM_IOCR_ODT_EN(0x3) -+ -+#define DRAM_MR_BURST_LENGTH(n) (((n) & 0x7) << 0) -+#define DRAM_MR_BURST_LENGTH_MASK DRAM_MR_BURST_LENGTH(0x7) -+#define DRAM_MR_CAS_LAT(n) (((n) & 0x7) << 4) -+#define DRAM_MR_CAS_LAT_MASK DRAM_MR_CAS_LAT(0x7) -+#define DRAM_MR_WRITE_RECOVERY(n) (((n) & 0x7) << 9) -+#define DRAM_MR_WRITE_RECOVERY_MASK DRAM_MR_WRITE_RECOVERY(0x7) -+#define DRAM_MR_POWER_DOWN (0x1 << 12) -+ -+#define DRAM_CSEL_MAGIC 0x16237495 -+ -+unsigned long sunxi_dram_init(void); -+unsigned long dramc_init(struct dram_para *para); -+ -+#endif /* _SUNXI_DRAM_H */ -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/early_print.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/early_print.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/early_print.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/early_print.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,58 @@ -+/* -+ * (C) Copyright 2007-2012 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * Early uart print for debugging. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_EARLY_PRINT_H -+#define _SUNXI_EARLY_PRINT_H -+ -+#include -+ -+#define SUNXI_UART_BASE SUNXI_UART0_BASE -+ -+#define UART_OFFSET 0x400 -+ -+/* receive buffer register */ -+#define UART_RBR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x0) -+/* transmit holding register */ -+#define UART_THR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x0) -+/* divisor latch low register */ -+#define UART_DLL(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x0) -+ -+/* divisor latch high register */ -+#define UART_DLH(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x4) -+/* interrupt enable reigster */ -+#define UART_IER(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x4) -+ -+/* interrupt identity register */ -+#define UART_IIR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x8) -+/* fifo control register */ -+#define UART_FCR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x8) -+ -+/* line control register */ -+#define UART_LCR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0xc) -+#define UART_LCR_DLAB (0x1 << 7) -+ -+/* line status register */ -+#define UART_LSR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x14) -+#define UART_LSR_TEMT (0x1 << 6) -+ -+ -+#define BAUD_115200 (0xd) /* 24 * 1000 * 1000 / 16 / 115200 = 13 */ -+#define NO_PARITY (0) -+#define ONE_STOP_BIT (0) -+#define DAT_LEN_8_BITS (3) -+#define LC_8_N_1 (NO_PARITY << 3 | ONE_STOP_BIT << 2 | DAT_LEN_8_BITS) -+ -+#ifndef __ASSEMBLY__ -+void uart_init(void); -+void uart_putc(char c); -+void uart_puts(const char *s); -+#endif /* __ASSEMBLY__ */ -+ -+#endif /* _SUNXI_EARLY_PRINT_H */ -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/gpio.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/gpio.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/gpio.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/gpio.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,174 @@ -+/* -+ * (C) Copyright 2007-2012 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_GPIO_H -+#define _SUNXI_GPIO_H -+ -+#include -+#include -+ -+/* -+ * sunxi has 9 banks of gpio, they are: -+ * PA0 - PA17 | PB0 - PB23 | PC0 - PC24 -+ * PD0 - PD27 | PE0 - PE31 | PF0 - PF5 -+ * PG0 - PG9 | PH0 - PH27 | PI0 - PI12 -+ */ -+ -+#define SUNXI_GPIO_A 0 -+#define SUNXI_GPIO_B 1 -+#define SUNXI_GPIO_C 2 -+#define SUNXI_GPIO_D 3 -+#define SUNXI_GPIO_E 4 -+#define SUNXI_GPIO_F 5 -+#define SUNXI_GPIO_G 6 -+#define SUNXI_GPIO_H 7 -+#define SUNXI_GPIO_I 8 -+#define SUNXI_GPIO_BANKS 9 -+ -+/* -+ * sun6i has atleast 1 additional bank, note banks J K don't exist! -+ * PL0 - PL1 at the very least is known. -+ * -+ * Note this bank is at a different register offset! -+ */ -+#define SUNXI_GPIO_L 9 -+ -+struct sunxi_gpio { -+ u32 cfg[4]; -+ u32 dat; -+ u32 drv[2]; -+ u32 pull[2]; -+}; -+ -+/* gpio interrupt control */ -+struct sunxi_gpio_int { -+ u32 cfg[3]; -+ u32 ctl; -+ u32 sta; -+ u32 deb; /* interrupt debounce */ -+}; -+ -+struct sunxi_gpio_reg { -+ struct sunxi_gpio gpio_bank[SUNXI_GPIO_BANKS]; -+ u8 res[0xbc]; -+ struct sunxi_gpio_int gpio_int; -+}; -+ -+#define BANK_TO_GPIO(bank) (((bank) < SUNXI_GPIO_BANKS) ? \ -+ &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \ -+ (struct sunxi_gpio *)SUNXI_R_PIO_BASE) -+ -+#define GPIO_BANK(pin) ((pin) >> 5) -+#define GPIO_NUM(pin) ((pin) & 0x1f) -+ -+#define GPIO_CFG_INDEX(pin) (((pin) & 0x1f) >> 3) -+#define GPIO_CFG_OFFSET(pin) ((((pin) & 0x1f) & 0x7) << 2) -+ -+#define GPIO_DRV_INDEX(pin) (((pin) & 0x1f) >> 4) -+#define GPIO_DRV_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1) -+ -+#define GPIO_PULL_INDEX(pin) (((pin) & 0x1f) >> 4) -+#define GPIO_PULL_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1) -+ -+/* GPIO bank sizes */ -+#define SUNXI_GPIO_A_NR 32 -+#define SUNXI_GPIO_B_NR 32 -+#define SUNXI_GPIO_C_NR 32 -+#define SUNXI_GPIO_D_NR 32 -+#define SUNXI_GPIO_E_NR 32 -+#define SUNXI_GPIO_F_NR 32 -+#define SUNXI_GPIO_G_NR 32 -+#define SUNXI_GPIO_H_NR 32 -+#define SUNXI_GPIO_I_NR 32 -+#define SUNXI_GPIO_L_NR 32 -+ -+#define SUNXI_GPIO_NEXT(__gpio) \ -+ ((__gpio##_START) + (__gpio##_NR) + 0) -+ -+enum sunxi_gpio_number { -+ SUNXI_GPIO_A_START = 0, -+ SUNXI_GPIO_B_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_A), -+ SUNXI_GPIO_C_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_B), -+ SUNXI_GPIO_D_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_C), -+ SUNXI_GPIO_E_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_D), -+ SUNXI_GPIO_F_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_E), -+ SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F), -+ SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G), -+ SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H), -+ SUNXI_GPIO_L_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_I), -+}; -+ -+/* SUNXI GPIO number definitions */ -+#define SUNXI_GPA(_nr) (SUNXI_GPIO_A_START + (_nr)) -+#define SUNXI_GPB(_nr) (SUNXI_GPIO_B_START + (_nr)) -+#define SUNXI_GPC(_nr) (SUNXI_GPIO_C_START + (_nr)) -+#define SUNXI_GPD(_nr) (SUNXI_GPIO_D_START + (_nr)) -+#define SUNXI_GPE(_nr) (SUNXI_GPIO_E_START + (_nr)) -+#define SUNXI_GPF(_nr) (SUNXI_GPIO_F_START + (_nr)) -+#define SUNXI_GPG(_nr) (SUNXI_GPIO_G_START + (_nr)) -+#define SUNXI_GPH(_nr) (SUNXI_GPIO_H_START + (_nr)) -+#define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr)) -+#define SUNXI_GPL(_nr) (SUNXI_GPIO_L_START + (_nr)) -+ -+/* GPIO pin function config */ -+#define SUNXI_GPIO_INPUT 0 -+#define SUNXI_GPIO_OUTPUT 1 -+ -+#define SUNXI_GPA0_EMAC 2 -+#define SUN7I_GPA0_GMAC 5 -+ -+#define SUNXI_GPB0_TWI0 2 -+ -+#define SUN4I_GPB22_UART0_TX 2 -+#define SUN4I_GPB23_UART0_RX 2 -+ -+#define SUN5I_GPB19_UART0_TX 2 -+#define SUN5I_GPB20_UART0_RX 2 -+ -+#define SUN5I_GPG3_UART1_TX 4 -+#define SUN5I_GPG4_UART1_RX 4 -+ -+#define SUNXI_GPC6_SDC2 3 -+ -+#define SUNXI_GPF0_SDC0 2 -+ -+#define SUNXI_GPF2_SDC0 2 -+ -+#ifdef CONFIG_SUN8I -+#define SUNXI_GPF2_UART0_TX 3 -+#define SUNXI_GPF4_UART0_RX 3 -+#else -+#define SUNXI_GPF2_UART0_TX 4 -+#define SUNXI_GPF4_UART0_RX 4 -+#endif -+ -+#define SUN4I_GPG0_SDC1 4 -+ -+#define SUN4I_GPH22_SDC1 5 -+ -+#define SUN4I_GPI4_SDC3 2 -+ -+/* GPIO pin pull-up/down config */ -+#define SUNXI_GPIO_PULL_DISABLE 0 -+#define SUNXI_GPIO_PULL_UP 1 -+#define SUNXI_GPIO_PULL_DOWN 2 -+ -+#define SUNXI_GPL0_R_P2WI_SCK 3 -+#define SUNXI_GPL1_R_P2WI_SDA 3 -+ -+#define SUN8I_GPL2_R_UART_TX 2 -+#define SUN8I_GPL3_R_UART_RX 2 -+ -+int sunxi_gpio_set_cfgpin(u32 pin, u32 val); -+int sunxi_gpio_get_cfgpin(u32 pin); -+int sunxi_gpio_set_drv(u32 pin, u32 val); -+int sunxi_gpio_set_pull(u32 pin, u32 val); -+int sunxi_name_to_gpio(const char *name); -+#define name_to_gpio(name) sunxi_name_to_gpio(name) -+ -+#endif /* _SUNXI_GPIO_H */ -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/i2c.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/i2c.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/i2c.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/i2c.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,15 @@ -+/* -+ * Copyright 2014 - Hans de Goede -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+#ifndef _SUNXI_I2C_H_ -+#define _SUNXI_I2C_H_ -+ -+#include -+ -+#define CONFIG_I2C_MVTWSI_BASE SUNXI_TWI0_BASE -+/* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */ -+#define CONFIG_SYS_TCLK 24000000 -+ -+#endif -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/mmc.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/mmc.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/mmc.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/mmc.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,122 @@ -+/* -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Aaron -+ * -+ * MMC register definition for allwinner sunxi platform. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_MMC_H -+#define _SUNXI_MMC_H -+ -+#include -+ -+struct sunxi_mmc { -+ u32 gctrl; /* 0x00 global control */ -+ u32 clkcr; /* 0x04 clock control */ -+ u32 timeout; /* 0x08 time out */ -+ u32 width; /* 0x0c bus width */ -+ u32 blksz; /* 0x10 block size */ -+ u32 bytecnt; /* 0x14 byte count */ -+ u32 cmd; /* 0x18 command */ -+ u32 arg; /* 0x1c argument */ -+ u32 resp0; /* 0x20 response 0 */ -+ u32 resp1; /* 0x24 response 1 */ -+ u32 resp2; /* 0x28 response 2 */ -+ u32 resp3; /* 0x2c response 3 */ -+ u32 imask; /* 0x30 interrupt mask */ -+ u32 mint; /* 0x34 masked interrupt status */ -+ u32 rint; /* 0x38 raw interrupt status */ -+ u32 status; /* 0x3c status */ -+ u32 ftrglevel; /* 0x40 FIFO threshold watermark*/ -+ u32 funcsel; /* 0x44 function select */ -+ u32 cbcr; /* 0x48 CIU byte count */ -+ u32 bbcr; /* 0x4c BIU byte count */ -+ u32 dbgc; /* 0x50 debug enable */ -+ u32 res0[11]; -+ u32 dmac; /* 0x80 internal DMA control */ -+ u32 dlba; /* 0x84 internal DMA descr list base address */ -+ u32 idst; /* 0x88 internal DMA status */ -+ u32 idie; /* 0x8c internal DMA interrupt enable */ -+ u32 chda; /* 0x90 */ -+ u32 cbda; /* 0x94 */ -+}; -+ -+#define SUNXI_MMC_CLK_POWERSAVE (0x1 << 17) -+#define SUNXI_MMC_CLK_ENABLE (0x1 << 16) -+#define SUNXI_MMC_CLK_DIVIDER_MASK (0xff) -+ -+#define SUNXI_MMC_GCTRL_SOFT_RESET (0x1 << 0) -+#define SUNXI_MMC_GCTRL_FIFO_RESET (0x1 << 1) -+#define SUNXI_MMC_GCTRL_DMA_RESET (0x1 << 2) -+#define SUNXI_MMC_GCTRL_RESET (SUNXI_MMC_GCTRL_SOFT_RESET|\ -+ SUNXI_MMC_GCTRL_FIFO_RESET|\ -+ SUNXI_MMC_GCTRL_DMA_RESET) -+#define SUNXI_MMC_GCTRL_DMA_ENABLE (0x1 << 5) -+#define SUNXI_MMC_GCTRL_ACCESS_BY_AHB (0x1 << 31) -+ -+#define SUNXI_MMC_CMD_RESP_EXPIRE (0x1 << 6) -+#define SUNXI_MMC_CMD_LONG_RESPONSE (0x1 << 7) -+#define SUNXI_MMC_CMD_CHK_RESPONSE_CRC (0x1 << 8) -+#define SUNXI_MMC_CMD_DATA_EXPIRE (0x1 << 9) -+#define SUNXI_MMC_CMD_WRITE (0x1 << 10) -+#define SUNXI_MMC_CMD_AUTO_STOP (0x1 << 12) -+#define SUNXI_MMC_CMD_WAIT_PRE_OVER (0x1 << 13) -+#define SUNXI_MMC_CMD_SEND_INIT_SEQ (0x1 << 15) -+#define SUNXI_MMC_CMD_UPCLK_ONLY (0x1 << 21) -+#define SUNXI_MMC_CMD_START (0x1 << 31) -+ -+#define SUNXI_MMC_RINT_RESP_ERROR (0x1 << 1) -+#define SUNXI_MMC_RINT_COMMAND_DONE (0x1 << 2) -+#define SUNXI_MMC_RINT_DATA_OVER (0x1 << 3) -+#define SUNXI_MMC_RINT_TX_DATA_REQUEST (0x1 << 4) -+#define SUNXI_MMC_RINT_RX_DATA_REQUEST (0x1 << 5) -+#define SUNXI_MMC_RINT_RESP_CRC_ERROR (0x1 << 6) -+#define SUNXI_MMC_RINT_DATA_CRC_ERROR (0x1 << 7) -+#define SUNXI_MMC_RINT_RESP_TIMEOUT (0x1 << 8) -+#define SUNXI_MMC_RINT_DATA_TIMEOUT (0x1 << 9) -+#define SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE (0x1 << 10) -+#define SUNXI_MMC_RINT_FIFO_RUN_ERROR (0x1 << 11) -+#define SUNXI_MMC_RINT_HARD_WARE_LOCKED (0x1 << 12) -+#define SUNXI_MMC_RINT_START_BIT_ERROR (0x1 << 13) -+#define SUNXI_MMC_RINT_AUTO_COMMAND_DONE (0x1 << 14) -+#define SUNXI_MMC_RINT_END_BIT_ERROR (0x1 << 15) -+#define SUNXI_MMC_RINT_SDIO_INTERRUPT (0x1 << 16) -+#define SUNXI_MMC_RINT_CARD_INSERT (0x1 << 30) -+#define SUNXI_MMC_RINT_CARD_REMOVE (0x1 << 31) -+#define SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT \ -+ (SUNXI_MMC_RINT_RESP_ERROR | \ -+ SUNXI_MMC_RINT_RESP_CRC_ERROR | \ -+ SUNXI_MMC_RINT_DATA_CRC_ERROR | \ -+ SUNXI_MMC_RINT_RESP_TIMEOUT | \ -+ SUNXI_MMC_RINT_DATA_TIMEOUT | \ -+ SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE | \ -+ SUNXI_MMC_RINT_FIFO_RUN_ERROR | \ -+ SUNXI_MMC_RINT_HARD_WARE_LOCKED | \ -+ SUNXI_MMC_RINT_START_BIT_ERROR | \ -+ SUNXI_MMC_RINT_END_BIT_ERROR) /* 0xbfc2 */ -+#define SUNXI_MMC_RINT_INTERRUPT_DONE_BIT \ -+ (SUNXI_MMC_RINT_AUTO_COMMAND_DONE | \ -+ SUNXI_MMC_RINT_DATA_OVER | \ -+ SUNXI_MMC_RINT_COMMAND_DONE | \ -+ SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE) -+ -+#define SUNXI_MMC_STATUS_RXWL_FLAG (0x1 << 0) -+#define SUNXI_MMC_STATUS_TXWL_FLAG (0x1 << 1) -+#define SUNXI_MMC_STATUS_FIFO_EMPTY (0x1 << 2) -+#define SUNXI_MMC_STATUS_FIFO_FULL (0x1 << 3) -+#define SUNXI_MMC_STATUS_CARD_PRESENT (0x1 << 8) -+#define SUNXI_MMC_STATUS_CARD_DATA_BUSY (0x1 << 9) -+#define SUNXI_MMC_STATUS_DATA_FSM_BUSY (0x1 << 10) -+ -+#define SUNXI_MMC_IDMAC_RESET (0x1 << 0) -+#define SUNXI_MMC_IDMAC_FIXBURST (0x1 << 1) -+#define SUNXI_MMC_IDMAC_ENABLE (0x1 << 7) -+ -+#define SUNXI_MMC_IDIE_TXIRQ (0x1 << 0) -+#define SUNXI_MMC_IDIE_RXIRQ (0x1 << 1) -+ -+int sunxi_mmc_init(int sdc_no); -+#endif /* _SUNXI_MMC_H */ -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/p2wi.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/p2wi.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/p2wi.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/p2wi.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,142 @@ -+/* -+ * Sunxi platform Push-Push i2c register definition. -+ * -+ * (c) Copyright 2013 Oliver Schinagl -+ * http://linux-sunxi.org -+ * -+ * (c)Copyright 2006-2013 -+ * Allwinner Technology Co., Ltd. -+ * Berg Xing -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_P2WI_H -+#define _SUNXI_P2WI_H -+ -+#include -+ -+#define P2WI_CTRL_RESET (0x1 << 0) -+#define P2WI_CTRL_IRQ_EN (0x1 << 1) -+#define P2WI_CTRL_TRANS_ABORT (0x1 << 6) -+#define P2WI_CTRL_TRANS_START (0x1 << 7) -+ -+#define __P2WI_CC_CLK(n) (((n) & 0xff) << 0) -+#define P2WI_CC_CLK_MASK __P2WI_CC_CLK_DIV(0xff) -+#define __P2WI_CC_CLK_DIV(n) (((n) >> 1) - 1) -+#define P2WI_CC_CLK_DIV(n) \ -+ __P2WI_CC_CLK(__P2WI_CC_CLK_DIV(n)) -+#define P2WI_CC_SDA_OUT_DELAY(n) (((n) & 0x7) << 8) -+#define P2WI_CC_SDA_OUT_DELAY_MASK P2WI_CC_SDA_OUT_DELAY(0x7) -+ -+#define P2WI_IRQ_TRANS_DONE (0x1 << 0) -+#define P2WI_IRQ_TRANS_ERR (0x1 << 1) -+#define P2WI_IRQ_LOAD_BUSY (0x1 << 2) -+ -+#define P2WI_STAT_TRANS_DONE (0x1 << 0) -+#define P2WI_STAT_TRANS_ERR (0x1 << 1) -+#define P2WI_STAT_LOAD_BUSY (0x1 << 2) -+#define __P2WI_STAT_TRANS_ERR(n) (((n) & 0xff) << 8) -+#define P2WI_STAT_TRANS_ERR_MASK __P2WI_STAT_TRANS_ERR_ID(0xff) -+#define __P2WI_STAT_TRANS_ERR_BYTE_1 0x01 -+#define __P2WI_STAT_TRANS_ERR_BYTE_2 0x02 -+#define __P2WI_STAT_TRANS_ERR_BYTE_3 0x04 -+#define __P2WI_STAT_TRANS_ERR_BYTE_4 0x08 -+#define __P2WI_STAT_TRANS_ERR_BYTE_5 0x10 -+#define __P2WI_STAT_TRANS_ERR_BYTE_6 0x20 -+#define __P2WI_STAT_TRANS_ERR_BYTE_7 0x40 -+#define __P2WI_STAT_TRANS_ERR_BYTE_8 0x80 -+#define P2WI_STAT_TRANS_ERR_BYTE_1 \ -+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_1) -+#define P2WI_STAT_TRANS_ERR_BYTE_2 \ -+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_2) -+#define P2WI_STAT_TRANS_ERR_BYTE_3 \ -+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_3) -+#define P2WI_STAT_TRANS_ERR_BYTE_4 \ -+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_4) -+#define P2WI_STAT_TRANS_ERR_BYTE_5 \ -+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_5) -+#define P2WI_STAT_TRANS_ERR_BYTE_6 \ -+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_6) -+#define P2WI_STAT_TRANS_ERR_BYTE_7 \ -+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_7) -+#define P2WI_STAT_TRANS_ERR_BYTE_8 \ -+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_8) -+ -+#define P2WI_DATADDR_BYTE_1(n) (((n) & 0xff) << 0) -+#define P2WI_DATADDR_BYTE_1_MASK P2WI_DATADDR_BYTE_1(0xff) -+#define P2WI_DATADDR_BYTE_2(n) (((n) & 0xff) << 8) -+#define P2WI_DATADDR_BYTE_2_MASK P2WI_DATADDR_BYTE_2(0xff) -+#define P2WI_DATADDR_BYTE_3(n) (((n) & 0xff) << 16) -+#define P2WI_DATADDR_BYTE_3_MASK P2WI_DATADDR_BYTE_3(0xff) -+#define P2WI_DATADDR_BYTE_4(n) (((n) & 0xff) << 24) -+#define P2WI_DATADDR_BYTE_4_MASK P2WI_DATADDR_BYTE_4(0xff) -+#define P2WI_DATADDR_BYTE_5(n) (((n) & 0xff) << 0) -+#define P2WI_DATADDR_BYTE_5_MASK P2WI_DATADDR_BYTE_5(0xff) -+#define P2WI_DATADDR_BYTE_6(n) (((n) & 0xff) << 8) -+#define P2WI_DATADDR_BYTE_6_MASK P2WI_DATADDR_BYTE_6(0xff) -+#define P2WI_DATADDR_BYTE_7(n) (((n) & 0xff) << 16) -+#define P2WI_DATADDR_BYTE_7_MASK P2WI_DATADDR_BYTE_7(0xff) -+#define P2WI_DATADDR_BYTE_8(n) (((n) & 0xff) << 24) -+#define P2WI_DATADDR_BYTE_8_MASK P2WI_DATADDR_BYTE_8(0xff) -+ -+#define __P2WI_DATA_NUM_BYTES(n) (((n) & 0x7) << 0) -+#define P2WI_DATA_NUM_BYTES_MASK __P2WI_DATA_NUM_BYTES(0x7) -+#define P2WI_DATA_NUM_BYTES(n) __P2WI_DATA_NUM_BYTES((n) - 1) -+#define P2WI_DATA_NUM_BYTES_READ (0x1 << 4) -+ -+#define P2WI_DATA_BYTE_1(n) (((n) & 0xff) << 0) -+#define P2WI_DATA_BYTE_1_MASK P2WI_DATA_BYTE_1(0xff) -+#define P2WI_DATA_BYTE_2(n) (((n) & 0xff) << 8) -+#define P2WI_DATA_BYTE_2_MASK P2WI_DATA_BYTE_2(0xff) -+#define P2WI_DATA_BYTE_3(n) (((n) & 0xff) << 16) -+#define P2WI_DATA_BYTE_3_MASK P2WI_DATA_BYTE_3(0xff) -+#define P2WI_DATA_BYTE_4(n) (((n) & 0xff) << 24) -+#define P2WI_DATA_BYTE_4_MASK P2WI_DATA_BYTE_4(0xff) -+#define P2WI_DATA_BYTE_5(n) (((n) & 0xff) << 0) -+#define P2WI_DATA_BYTE_5_MASK P2WI_DATA_BYTE_5(0xff) -+#define P2WI_DATA_BYTE_6(n) (((n) & 0xff) << 8) -+#define P2WI_DATA_BYTE_6_MASK P2WI_DATA_BYTE_6(0xff) -+#define P2WI_DATA_BYTE_7(n) (((n) & 0xff) << 16) -+#define P2WI_DATA_BYTE_7_MASK P2WI_DATA_BYTE_7(0xff) -+#define P2WI_DATA_BYTE_8(n) (((n) & 0xff) << 24) -+#define P2WI_DATA_BYTE_8_MASK P2WI_DATA_BYTE_8(0xff) -+ -+#define P2WI_LINECTRL_SDA_CTRL_EN (0x1 << 0) -+#define P2WI_LINECTRL_SDA_OUT_HIGH (0x1 << 1) -+#define P2WI_LINECTRL_SCL_CTRL_EN (0x1 << 2) -+#define P2WI_LINECTRL_SCL_OUT_HIGH (0x1 << 3) -+#define P2WI_LINECTRL_SDA_STATE_HIGH (0x1 << 4) -+#define P2WI_LINECTRL_SCL_STATE_HIGH (0x1 << 5) -+ -+#define P2WI_PM_DEV_ADDR(n) (((n) & 0xff) << 0) -+#define P2WI_PM_DEV_ADDR_MASK P2WI_PM_DEV_ADDR(0xff) -+#define P2WI_PM_CTRL_ADDR(n) (((n) & 0xff) << 8) -+#define P2WI_PM_CTRL_ADDR_MASK P2WI_PM_CTRL_ADDR(0xff) -+#define P2WI_PM_INIT_DATA(n) (((n) & 0xff) << 16) -+#define P2WI_PM_INIT_DATA_MASK P2WI_PM_INIT_DATA(0xff) -+#define P2WI_PM_INIT_SEND (0x1 << 31) -+ -+#ifndef __ASSEMBLY__ -+struct sunxi_p2wi_reg { -+ u32 ctrl; /* 0x00 control */ -+ u32 cc; /* 0x04 clock control */ -+ u32 irq; /* 0x08 interrupt */ -+ u32 status; /* 0x0c status */ -+ u32 dataddr0; /* 0x10 data address 0 */ -+ u32 dataddr1; /* 0x14 data address 1 */ -+ u32 numbytes; /* 0x18 num bytes */ -+ u32 data0; /* 0x1c data buffer 0 */ -+ u32 data1; /* 0x20 data buffer 1 */ -+ u32 linectrl; /* 0x24 line control */ -+ u32 pm; /* 0x28 power management */ -+}; -+ -+void p2wi_init(void); -+int p2wi_set_pmu_address(u8 slave_addr, u8 ctrl_reg, u8 init_data); -+int p2wi_read(const u8 addr, u8 *data); -+int p2wi_write(const u8 addr, u8 data); -+ -+#endif /* __ASSEMBLY__ */ -+#endif /* _SUNXI_P2WI_H */ -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/prcm.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/prcm.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/prcm.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/prcm.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,238 @@ -+/* -+ * Sunxi A31 Power Management Unit register definition. -+ * -+ * (C) Copyright 2013 Oliver Schinagl -+ * http://linux-sunxi.org -+ * Allwinner Technology Co., Ltd. -+ * Berg Xing -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_PRCM_H -+#define _SUNXI_PRCM_H -+ -+#define __PRCM_CPUS_CFG_PRE(n) (((n) & 0x3) << 4) -+#define PRCM_CPUS_CFG_PRE_MASK __PRCM_CPUS_CFG_PRE(0x3) -+#define __PRCM_CPUS_CFG_PRE_DIV(n) (((n) >> 1) - 1) -+#define PRCM_CPUS_CFG_PRE_DIV(n) \ -+ __PRCM_CPUS_CFG_PRE(__PRCM_CPUS_CFG_CLK_PRE(n)) -+#define __PRCM_CPUS_CFG_POST(n) (((n) & 0x1f) << 8) -+#define PRCM_CPUS_CFG_POST_MASK __PRCM_CPUS_CFG_POST(0x1f) -+#define __PRCM_CPUS_CFG_POST_DIV(n) ((n) - 1) -+#define PRCM_CPUS_CFG_POST_DIV(n) \ -+ __PRCM_CPUS_CFG_POST_DIV(__PRCM_CPUS_CFG_POST_DIV(n)) -+#define __PRCM_CPUS_CFG_CLK_SRC(n) (((n) & 0x3) << 16) -+#define PRCM_CPUS_CFG_CLK_SRC_MASK __PRCM_CPUS_CFG_CLK_SRC(0x3) -+#define __PRCM_CPUS_CFG_CLK_SRC_LOSC 0x0 -+#define __PRCM_CPUS_CFG_CLK_SRC_HOSC 0x1 -+#define __PRCM_CPUS_CFG_CLK_SRC_PLL6 0x2 -+#define __PRCM_CPUS_CFG_CLK_SRC_PDIV 0x3 -+#define PRCM_CPUS_CFG_CLK_SRC_LOSC \ -+ __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_LOSC) -+#define PRCM_CPUS_CFG_CLK_SRC_HOSC \ -+ __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_HOSC) -+#define PRCM_CPUS_CFG_CLK_SRC_PLL6 \ -+ __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PLL6) -+#define PRCM_CPUS_CFG_CLK_SRC_PDIV \ -+ __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PDIV) -+ -+#define __PRCM_APB0_RATIO(n) (((n) & 0x3) <<0) -+#define PRCM_APB0_RATIO_DIV_MASK __PRCM_APB0_RATIO_DIV(0x3) -+#define __PRCM_APB0_RATIO_DIV(n) (((n) >> 1) - 1) -+#define PRCM_APB0_RATIO_DIV(n) \ -+ __PRCM_APB0_RATIO(__PRCM_APB0_RATIO_DIV(n)) -+ -+#define PRCM_CPU_CFG_NEON_CLK_EN (0x1 << 0) -+#define PRCM_CPU_CFG_CPU_CLK_EN (0x1 << 1) -+ -+#define PRCM_APB0_GATE_PIO (0x1 << 0) -+#define PRCM_APB0_GATE_IR (0x1 << 1) -+#define PRCM_APB0_GATE_TIMER01 (0x1 << 2) -+#define PRCM_APB0_GATE_P2WI (0x1 << 3) -+#define PRCM_APB0_GATE_UART (0x1 << 4) -+#define PRCM_APB0_GATE_1WIRE (0x1 << 5) -+#define PRCM_APB0_GATE_I2C (0x1 << 6) -+ -+#define PRCM_APB0_RESET_PIO (0x1 << 0) -+#define PRCM_APB0_RESET_IR (0x1 << 1) -+#define PRCM_APB0_RESET_TIMER01 (0x1 << 2) -+#define PRCM_APB0_RESET_P2WI (0x1 << 3) -+#define PRCM_APB0_RESET_UART (0x1 << 4) -+#define PRCM_APB0_RESET_1WIRE (0x1 << 5) -+#define PRCM_APB0_RESET_I2C (0x1 << 6) -+ -+#define PRCM_PLL_CTRL_PLL_BIAS (0x1 << 0) -+#define PRCM_PLL_CTRL_HOSC_GAIN_ENH (0x1 << 1) -+#define __PRCM_PLL_CTRL_USB_CLK_SRC(n) (((n) & 0x3) << 4) -+#define PRCM_PLL_CTRL_USB_CLK_SRC_MASK \ -+ __PRCM_PLL_CTRL_USB_CLK_SRC(0x3) -+#define __PRCM_PLL_CTRL_USB_CLK_0 0x0 -+#define __PRCM_PLL_CTRL_USB_CLK_1 0x1 -+#define __PRCM_PLL_CTRL_USB_CLK_2 0x2 -+#define __PRCM_PLL_CTRL_USB_CLK_3 0x3 -+#define PRCM_PLL_CTRL_USB_CLK_0 \ -+ __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_0) -+#define PRCM_PLL_CTRL_USB_CLK_1 \ -+ __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_1) -+#define PRCM_PLL_CTRL_USB_CLK_2 \ -+ __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_2) -+#define PRCM_PLL_CTRL_USB_CLK_3 \ -+ __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_3) -+#define __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) (((n) & 0x3) << 12) -+#define PRCM_PLL_CTRL_INT_PLL_IN_SEL_MASK \ -+ __PRCM_PLL_CTRL_INT_PLL_IN_SEL(0x3) -+#define PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) \ -+ __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) -+#define __PRCM_PLL_CTRL_HOSC_CLK_SEL(n) (((n) & 0x3) << 20) -+#define PRCM_PLL_CTRL_HOSC_CLK_SEL_MASK \ -+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(0x3) -+#define __PRCM_PLL_CTRL_HOSC_CLK_0 0x0 -+#define __PRCM_PLL_CTRL_HOSC_CLK_1 0x1 -+#define __PRCM_PLL_CTRL_HOSC_CLK_2 0x2 -+#define __PRCM_PLL_CTRL_HOSC_CLK_3 0x3 -+#define PRCM_PLL_CTRL_HOSC_CLK_0 \ -+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_0) -+#define PRCM_PLL_CTRL_HOSC_CLK_1 \ -+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_1) -+#define PRCM_PLL_CTRL_HOSC_CLK_2 \ -+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_2) -+#define PRCM_PLL_CTRL_HOSC_CLK_3 \ -+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_3) -+#define PRCM_PLL_CTRL_PLL_TST_SRC_EXT (0x1 << 24) -+#define PRCM_PLL_CTRL_LDO_DIGITAL_EN (0x1 << 0) -+#define PRCM_PLL_CTRL_LDO_ANALOG_EN (0x1 << 1) -+#define PRCM_PLL_CTRL_EXT_OSC_EN (0x1 << 2) -+#define PRCM_PLL_CTRL_CLK_TST_EN (0x1 << 3) -+#define PRCM_PLL_CTRL_IN_PWR_HIGH (0x1 << 15) /* 3.3 for hi 2.5 for lo */ -+#define __PRCM_PLL_CTRL_VDD_LDO_OUT(n) (((n) & 0x7) << 16) -+#define PRCM_PLL_CTRL_LDO_OUT_MASK \ -+ __PRCM_PLL_CTRL_LDO_OUT(0x7) -+/* When using the low voltage 20 mV steps, and high voltage 30 mV steps */ -+#define PRCM_PLL_CTRL_LDO_OUT_L(n) \ -+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7) -+#define PRCM_PLL_CTRL_LDO_OUT_H(n) \ -+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7) -+#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \ -+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000) -+#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \ -+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160) -+#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24) -+ -+#define PRCM_CLK_1WIRE_GATE (0x1 << 31) -+ -+#define __PRCM_CLK_MOD0_M(n) (((n) & 0xf) << 0) -+#define PRCM_CLK_MOD0_M_MASK __PRCM_CLK_MOD0_M(0xf) -+#define __PRCM_CLK_MOD0_M_X(n) (n - 1) -+#define PRCM_CLK_MOD0_M(n) __PRCM_CLK_MOD0_M(__PRCM_CLK_MOD0_M_X(n)) -+#define PRCM_CLK_MOD0_OUT_PHASE(n) (((n) & 0x7) << 8) -+#define PRCM_CLK_MOD0_OUT_PHASE_MASK(n) PRCM_CLK_MOD0_OUT_PHASE(0x7) -+#define _PRCM_CLK_MOD0_N(n) (((n) & 0x3) << 16) -+#define PRCM_CLK_MOD0_N_MASK __PRCM_CLK_MOD_N(0x3) -+#define __PRCM_CLK_MOD0_N_X(n) (((n) >> 1) -1) -+#define PRCM_CLK_MOD0_N(n) __PRCM_CLK_MOD0_N(__PRCM_CLK_MOD0_N_X(n)) -+#define PRCM_CLK_MOD0_SMPL_PHASE(n) (((n) & 0x7) << 20) -+#define PRCM_CLK_MOD0_SMPL_PHASE_MASK PRCM_CLK_MOD0_SMPL_PHASE(0x7) -+#define PRCM_CLK_MOD0_SRC_SEL(n) (((n) & 0x7) << 24) -+#define PRCM_CLK_MOD0_SRC_SEL_MASK PRCM_CLK_MOD0_SRC_SEL(0x7) -+#define PRCM_CLK_MOD0_GATE_EN (0x1 << 31) -+ -+#define PRCM_APB0_RESET_PIO (0x1 << 0) -+#define PRCM_APB0_RESET_IR (0x1 << 1) -+#define PRCM_APB0_RESET_TIMER01 (0x1 << 2) -+#define PRCM_APB0_RESET_P2WI (0x1 << 3) -+#define PRCM_APB0_RESET_UART (0x1 << 4) -+#define PRCM_APB0_RESET_1WIRE (0x1 << 5) -+#define PRCM_APB0_RESET_I2C (0x1 << 6) -+ -+#define __PRCM_CLK_OUTD_M(n) (((n) & 0x7) << 8) -+#define PRCM_CLK_OUTD_M_MASK __PRCM_CLK_OUTD_M(0x7) -+#define __PRCM_CLK_OUTD_M_X() ((n) - 1) -+#define PRCM_CLK_OUTD_M(n) __PRCM_CLK_OUTD_M(__PRCM_CLK_OUTD_M_X(n)) -+#define __PRCM_CLK_OUTD_N(n) (((n) & 0x7) << 20) -+#define PRCM_CLK_OUTD_N_MASK __PRCM_CLK_OUTD_N(0x7) -+#define __PRCM_CLK_OUTD_N_X(n) (((n) >> 1) - 1) -+#define PRCM_CLK_OUTD_N(n) __PRCM_CLK_OUTD_N(__PRCM_CLK_OUTD_N_X(n) -+#define __PRCM_CLK_OUTD_SRC_SEL(n) (((n) & 0x3) << 24) -+#define PRCM_CLK_OUTD_SRC_SEL_MASK __PRCM_CLK_OUTD_SRC_SEL(0x3) -+#define __PRCM_CLK_OUTD_SRC_LOSC2 0x0 -+#define __PRCM_CLK_OUTD_SRC_LOSC 0x1 -+#define __PRCM_CLK_OUTD_SRC_HOSC 0x2 -+#define __PRCM_CLK_OUTD_SRC_ERR 0x3 -+#define PRCM_CLK_OUTD_SRC_LOSC2 \ -+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC2) -+#define PRCM_CLK_OUTD_SRC_LOSC \ -+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC) -+#define PRCM_CLK_OUTD_SRC_HOSC \ -+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_HOSC) -+#define PRCM_CLK_OUTD_SRC_ERR \ -+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_ERR) -+#define PRCM_CLK_OUTD_EN (0x1 << 31) -+ -+#define PRCM_CPU0_PWROFF (0x1 << 0) -+#define PRCM_CPU1_PWROFF (0x1 << 1) -+#define PRCM_CPU2_PWROFF (0x1 << 2) -+#define PRCM_CPU3_PWROFF (0x1 << 3) -+#define PRCM_CPU_ALL_PWROFF (0xf << 0) -+ -+#define PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF (0x1 << 0) -+#define PRCM_VDD_SYS_DRAM_CH1_PAD_HOLD_PWROFF (0x1 << 1) -+#define PRCM_VDD_SYS_AVCC_A_PWROFF (0x1 << 2) -+#define PRCM_VDD_SYS_CPU0_VDD_PWROFF (0x1 << 3) -+ -+#define PRCM_VDD_GPU_PWROFF (0x1 << 0) -+ -+#define PRCM_VDD_SYS_RESET (0x1 << 0) -+ -+#define PRCM_CPU1_PWR_CLAMP(n) (((n) & 0xff) << 0) -+#define PRCM_CPU1_PWR_CLAMP_MASK PRCM_CPU1_PWR_CLAMP(0xff) -+ -+#define PRCM_CPU2_PWR_CLAMP(n) (((n) & 0xff) << 0) -+#define PRCM_CPU2_PWR_CLAMP_MASK PRCM_CPU2_PWR_CLAMP(0xff) -+ -+#define PRCM_CPU3_PWR_CLAMP(n) (((n) & 0xff) << 0) -+#define PRCM_CPU3_PWR_CLAMP_MASK PRCM_CPU3_PWR_CLAMP(0xff) -+ -+#ifndef __ASSEMBLY__ -+struct sunxi_prcm_reg { -+ u32 cpus_cfg; /* 0x000 */ -+ u8 res0[0x8]; /* 0x004 */ -+ u32 apb0_ratio; /* 0x00c */ -+ u32 cpu0_cfg; /* 0x010 */ -+ u32 cpu1_cfg; /* 0x014 */ -+ u32 cpu2_cfg; /* 0x018 */ -+ u32 cpu3_cfg; /* 0x01c */ -+ u8 res1[0x8]; /* 0x020 */ -+ u32 apb0_gate; /* 0x028 */ -+ u8 res2[0x14]; /* 0x02c */ -+ u32 pll_ctrl0; /* 0x040 */ -+ u32 pll_ctrl1; /* 0x044 */ -+ u8 res3[0x8]; /* 0x048 */ -+ u32 clk_1wire; /* 0x050 */ -+ u32 clk_ir; /* 0x054 */ -+ u8 res4[0x58]; /* 0x058 */ -+ u32 apb0_reset; /* 0x0b0 */ -+ u8 res5[0x3c]; /* 0x0b4 */ -+ u32 clk_outd; /* 0x0f0 */ -+ u8 res6[0xc]; /* 0x0f4 */ -+ u32 cpu_pwroff; /* 0x100 */ -+ u8 res7[0xc]; /* 0x104 */ -+ u32 vdd_sys_pwroff; /* 0x110 */ -+ u8 res8[0x4]; /* 0x114 */ -+ u32 gpu_pwroff; /* 0x118 */ -+ u8 res9[0x4]; /* 0x11c */ -+ u32 vdd_pwr_reset; /* 0x120 */ -+ u8 res10[0x20]; /* 0x124 */ -+ u32 cpu1_pwr_clamp; /* 0x144 */ -+ u32 cpu2_pwr_clamp; /* 0x148 */ -+ u32 cpu3_pwr_clamp; /* 0x14c */ -+ u8 res11[0x30]; /* 0x150 */ -+ u32 dram_pwr; /* 0x180 */ -+ u8 res12[0xc]; /* 0x184 */ -+ u32 dram_tst; /* 0x190 */ -+}; -+ -+void prcm_apb0_enable(u32 flags); -+#endif /* __ASSEMBLY__ */ -+#endif /* _PRCM_H */ -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/smp.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/smp.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/smp.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/smp.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,22 @@ -+/* -+ * (C) Copyright 2013 -+ * Carl van Schaik -+ * -+ * CPU configuration registers for the sun7i (A20). -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_SMP_H_ -+#define _SUNXI_SMP_H_ -+ -+#ifndef __ASSEMBLY__ -+ -+void startup_secondaries(void); -+ -+/* Assembly entry point */ -+extern void secondary_init(void); -+ -+#endif /* __ASSEMBLY__ */ -+ -+#endif /* _SUNXI_SMP_H_ */ -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/spl.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/spl.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/spl.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/spl.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,20 @@ -+/* -+ * This is a copy of omap3/spl.h: -+ * -+ * (C) Copyright 2012 -+ * Texas Instruments, -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+#ifndef _ASM_ARCH_SPL_H_ -+#define _ASM_SPL_H_ -+ -+#define BOOT_DEVICE_NONE 0 -+#define BOOT_DEVICE_XIP 1 -+#define BOOT_DEVICE_NAND 2 -+#define BOOT_DEVICE_ONE_NAND 3 -+#define BOOT_DEVICE_MMC2 5 /*emmc*/ -+#define BOOT_DEVICE_MMC1 6 -+#define BOOT_DEVICE_XIPWAIT 7 -+#define BOOT_DEVICE_MMC2_2 0xff -+#endif -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/sys_proto.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/sys_proto.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/sys_proto.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/sys_proto.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,16 @@ -+/* -+ * (C) Copyright 2007-2012 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SYS_PROTO_H_ -+#define _SYS_PROTO_H_ -+ -+#include -+ -+void sdelay(unsigned long); -+ -+#endif -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/timer.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/timer.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/timer.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/timer.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,88 @@ -+/* -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * Configuration settings for the Allwinner A10-evb board. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_TIMER_H_ -+#define _SUNXI_TIMER_H_ -+ -+#ifndef __ASSEMBLY__ -+ -+#include -+ -+/* General purpose timer */ -+struct sunxi_timer { -+ u32 ctl; -+ u32 inter; -+ u32 val; -+ u8 res[4]; -+}; -+ -+/* Audio video sync*/ -+struct sunxi_avs { -+ u32 ctl; /* 0x80 */ -+ u32 cnt0; /* 0x84 */ -+ u32 cnt1; /* 0x88 */ -+ u32 div; /* 0x8c */ -+}; -+ -+/* 64 bit counter */ -+struct sunxi_64cnt { -+ u32 ctl; /* 0xa0 */ -+ u32 lo; /* 0xa4 */ -+ u32 hi; /* 0xa8 */ -+}; -+ -+/* Watchdog */ -+struct sunxi_wdog { -+ u32 ctl; /* 0x90 */ -+ u32 mode; /* 0x94 */ -+}; -+ -+/* Rtc */ -+struct sunxi_rtc { -+ u32 ctl; /* 0x100 */ -+ u32 yymmdd; /* 0x104 */ -+ u32 hhmmss; /* 0x108 */ -+}; -+ -+/* Alarm */ -+struct sunxi_alarm { -+ u32 ddhhmmss; /* 0x10c */ -+ u32 hhmmss; /* 0x110 */ -+ u32 en; /* 0x114 */ -+ u32 irqen; /* 0x118 */ -+ u32 irqsta; /* 0x11c */ -+}; -+ -+/* Timer general purpose register */ -+struct sunxi_tgp { -+ u32 tgpd; -+}; -+ -+struct sunxi_timer_reg { -+ u32 tirqen; /* 0x00 */ -+ u32 tirqsta; /* 0x04 */ -+ u8 res1[8]; -+ struct sunxi_timer timer[6]; /* We have 6 timers */ -+ u8 res2[16]; -+ struct sunxi_avs avs; -+ struct sunxi_wdog wdog; -+ u8 res3[8]; -+ struct sunxi_64cnt cnt64; -+ u8 res4[0x58]; -+ struct sunxi_rtc rtc; -+ struct sunxi_alarm alarm; -+ struct sunxi_tgp tgp[4]; -+ u8 res5[8]; -+ u32 cpu_cfg; -+}; -+ -+#endif /* __ASSEMBLY__ */ -+ -+#endif -diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/watchdog.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/watchdog.h ---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/watchdog.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/watchdog.h 2014-09-06 16:58:35.381953139 +0200 -@@ -0,0 +1,22 @@ -+/* -+ * Watchdog driver for the Allwinner sunxi platform. -+ * Copyright (C) 2013 Oliver Schinagl -+ * http://www.linux-sunxi.org/ -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_WATCHDOG_H_ -+#define _SUNXI_WATCHDOG_H_ -+ -+/* Timeout limits */ -+#define WDT_MAX_TIMEOUT 16 -+#define WDT_OFF -1 -+ -+#ifndef __ASSEMBLY__ -+void watchdog_reset(void); -+void watchdog_set(int timeout); -+void watchdog_init(void); -+#endif /* __ASSEMBLY__ */ -+ -+#endif -diff -ruN u-boot-2014.04/board/sunxi/board.c u-boot-sunxi/board/sunxi/board.c ---- u-boot-2014.04/board/sunxi/board.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/board.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,239 @@ -+/* -+ * (C) Copyright 2012-2013 Henrik Nordstrom -+ * (C) Copyright 2013 Luke Kenneth Casson Leighton -+ * -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * Some board init for the Allwinner A10-evb board. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#ifdef CONFIG_AXP152_POWER -+#include -+#endif -+#ifdef CONFIG_AXP209_POWER -+#include -+#endif -+#ifdef CONFIG_AXP221_POWER -+#include -+#endif -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+/* add board specific code here */ -+int board_init(void) -+{ -+ int id_pfr1; -+ -+ gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100); -+ -+ asm volatile("mrc p15, 0, %0, c0, c1, 1" : "=r"(id_pfr1)); -+ debug("id_pfr1: 0x%08x\n", id_pfr1); -+ /* Generic Timer Extension available? */ -+ if ((id_pfr1 >> 16) & 0xf) { -+ debug("Setting CNTFRQ\n"); -+ /* CNTFRQ == 24 MHz */ -+ asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000)); -+ } -+ -+#ifdef CONFIG_STATUS_LED -+ status_led_set(STATUS_LED_BOOT, STATUS_LED_ON); -+#endif -+ return 0; -+} -+ -+#ifdef CONFIG_DISPLAY_BOARDINFO -+int checkboard(void) -+{ -+ printf("Board: %s\n", CONFIG_SYS_BOARD_NAME); -+ -+ return 0; -+} -+#endif -+ -+int dram_init(void) -+{ -+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_GENERIC_MMC -+static void mmc_pinmux_setup(int sdc) -+{ -+ unsigned int pin; -+ -+ switch (sdc) { -+ case 0: -+ /* D1-PF0, D0-PF1, CLK-PF2, CMD-PF3, D3-PF4, D4-PF5 */ -+ for (pin = SUNXI_GPF(0); pin <= SUNXI_GPF(5); pin++) { -+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPF0_SDC0); -+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); -+ sunxi_gpio_set_drv(pin, 2); -+ } -+ break; -+ -+ case 1: -+ /* CMD-PH22, CLK-PH23, D0~D3-PH24~27 : 5 */ -+ for (pin = SUNXI_GPH(22); pin <= SUNXI_GPH(27); pin++) { -+ sunxi_gpio_set_cfgpin(pin, SUN4I_GPH22_SDC1); -+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); -+ sunxi_gpio_set_drv(pin, 2); -+ } -+ break; -+ -+ case 2: -+ /* CMD-PC6, CLK-PC7, D0-PC8, D1-PC9, D2-PC10, D3-PC11 */ -+ for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(11); pin++) { -+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC6_SDC2); -+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); -+ sunxi_gpio_set_drv(pin, 2); -+ } -+ break; -+ -+ case 3: -+ /* CMD-PI4, CLK-PI5, D0~D3-PI6~9 : 2 */ -+ for (pin = SUNXI_GPI(4); pin <= SUNXI_GPI(9); pin++) { -+ sunxi_gpio_set_cfgpin(pin, SUN4I_GPI4_SDC3); -+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); -+ sunxi_gpio_set_drv(pin, 2); -+ } -+ break; -+ -+ default: -+ printf("sunxi: invalid MMC slot %d for pinmux setup\n", sdc); -+ break; -+ } -+} -+ -+int board_mmc_init(bd_t *bis) -+{ -+ mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT); -+ sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT); -+#if !defined (CONFIG_SPL_BUILD) && defined (CONFIG_MMC_SUNXI_SLOT_EXTRA) -+ mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT_EXTRA); -+ sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA); -+#endif -+ -+ return 0; -+} -+#endif -+ -+void i2c_init_board(void) -+{ -+ sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUNXI_GPB0_TWI0); -+ sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUNXI_GPB0_TWI0); -+ clock_twi_onoff(0, 1); -+} -+ -+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) -+void sunxi_board_init(void) -+{ -+ int power_failed = 0; -+#if !defined(CONFIG_SUN6I) && !defined(CONFIG_SUN8I) -+ unsigned long ramsize; -+#endif -+ -+#ifdef CONFIG_AXP152_POWER -+ power_failed = axp152_init(); -+ power_failed |= axp152_set_dcdc2(1400); -+ power_failed |= axp152_set_dcdc3(1500); -+ power_failed |= axp152_set_dcdc4(1250); -+ power_failed |= axp152_set_ldo2(3000); -+#endif -+#ifdef CONFIG_AXP209_POWER -+ power_failed |= axp209_init(); -+ power_failed |= axp209_set_dcdc2(1400); -+#ifdef CONFIG_FAST_MBUS -+ power_failed |= axp209_set_dcdc3(1300); -+#else -+ power_failed |= axp209_set_dcdc3(1250); -+#endif -+ power_failed |= axp209_set_ldo2(3000); -+ power_failed |= axp209_set_ldo3(2800); -+ power_failed |= axp209_set_ldo4(2800); -+#endif -+#ifdef CONFIG_AXP221_POWER -+ power_failed = axp221_init(); -+ power_failed |= axp221_set_dcdc1(3300); -+ power_failed |= axp221_set_dcdc2(1200); -+ power_failed |= axp221_set_dcdc3(1260); -+ power_failed |= axp221_set_dcdc4(1200); -+ power_failed |= axp221_set_dcdc5(1500); -+#ifdef CONFIG_ENABLE_DLDO1_POWER -+ power_failed |= axp221_set_dldo1(3300); -+#endif -+#endif -+ -+#if !defined(CONFIG_SUN6I) && !defined(CONFIG_SUN8I) -+ printf("DRAM:"); -+ ramsize = sunxi_dram_init(); -+ printf(" %lu MiB\n", ramsize >> 20); -+ if (!ramsize) -+ hang(); -+ -+ /* -+ * Only clock up the CPU to full speed if we are reasonably -+ * assured it's being powered with suitable core voltage -+ */ -+ if (!power_failed) -+ clock_set_pll1(CONFIG_CLK_FULL_SPEED); -+ else -+ printf("Failed to set core voltage! Can't set CPU frequency\n"); -+#endif -+} -+#endif -+ -+#if defined(CONFIG_SPL_OS_BOOT) && defined(CONFIG_AXP209_POWER) -+int spl_start_uboot(void) -+{ -+ if (axp209_poweron_by_dc()) -+ return 0; -+ axp209_power_button(); /* Clear any pending button event */ -+ mdelay(100); -+ return axp209_power_button(); -+} -+#endif -+ -+#ifdef CONFIG_SPL_DISPLAY_PRINT -+void spl_display_print(void) -+{ -+ printf("Board: %s\n", CONFIG_SYS_BOARD_NAME); -+} -+#endif -+ -+#ifdef CONFIG_MISC_INIT_R -+int misc_init_r(void) -+{ -+ if (!getenv("ethaddr")) { -+ uint32_t reg_val = readl(SUNXI_SID_BASE); -+ -+ if (reg_val) { -+ uint8_t mac_addr[6]; -+ -+ mac_addr[0] = 0x02; /* Non OUI / registered MAC address */ -+ mac_addr[1] = (reg_val >> 0) & 0xff; -+ reg_val = readl(SUNXI_SID_BASE + 0x0c); -+ mac_addr[2] = (reg_val >> 24) & 0xff; -+ mac_addr[3] = (reg_val >> 16) & 0xff; -+ mac_addr[4] = (reg_val >> 8) & 0xff; -+ mac_addr[5] = (reg_val >> 0) & 0xff; -+ -+ eth_setenv_enetaddr("ethaddr", mac_addr); -+ } -+ } -+ -+ return 0; -+} -+#endif -diff -ruN u-boot-2014.04/board/sunxi/dram_a10_olinuxino_l.c u-boot-sunxi/board/sunxi/dram_a10_olinuxino_l.c ---- u-boot-2014.04/board/sunxi/dram_a10_olinuxino_l.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_a10_olinuxino_l.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 480, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 16, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_a13_oli_micro.c u-boot-sunxi/board/sunxi/dram_a13_oli_micro.c ---- u-boot-2014.04/board/sunxi/dram_a13_oli_micro.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_a13_oli_micro.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,32 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 408, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 16, -+ .bus_width = 16, -+ .cas = 9, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 256, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0x10, -+ .emr3 = 0, -+ -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_a13_olinuxino.c u-boot-sunxi/board/sunxi/dram_a13_olinuxino.c ---- u-boot-2014.04/board/sunxi/dram_a13_olinuxino.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_a13_olinuxino.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 408, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 8, -+ .bus_width = 16, -+ .cas = 9, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_a20_olinuxino_l2.c u-boot-sunxi/board/sunxi/dram_a20_olinuxino_l2.c ---- u-boot-2014.04/board/sunxi/dram_a20_olinuxino_l2.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_a20_olinuxino_l2.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include "common.h" -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 480, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 0x7f, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_a20_olinuxino_l.c u-boot-sunxi/board/sunxi/dram_a20_olinuxino_l.c ---- u-boot-2014.04/board/sunxi/dram_a20_olinuxino_l.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_a20_olinuxino_l.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include "common.h" -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 480, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 16, -+ .cas = 9, -+ .zq = 0x7f, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_ainol_aw1.c u-boot-sunxi/board/sunxi/dram_ainol_aw1.c ---- u-boot-2014.04/board/sunxi/dram_ainol_aw1.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_ainol_aw1.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include "common.h" -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 432, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 0x7b, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 1, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_auxtek_t003.c u-boot-sunxi/board/sunxi/dram_auxtek_t003.c ---- u-boot-2014.04/board/sunxi/dram_auxtek_t003.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_auxtek_t003.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 408, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 8, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_cubieboard.c u-boot-sunxi/board/sunxi/dram_cubieboard.c ---- u-boot-2014.04/board/sunxi/dram_cubieboard.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_cubieboard.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 480, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_cubietruck.c u-boot-sunxi/board/sunxi/dram_cubietruck.c ---- u-boot-2014.04/board/sunxi/dram_cubietruck.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_cubietruck.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 432, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 8, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 0x7f, -+ .odt_en = 0, -+ .size = 2048, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0x0, -+ .tpr4 = 0x1, -+ .tpr5 = 0x0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0x0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_eu3000.c u-boot-sunxi/board/sunxi/dram_eu3000.c ---- u-boot-2014.04/board/sunxi/dram_eu3000.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_eu3000.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include "common.h" -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 432, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 0x7b, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 1, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_forfun_q88db.c u-boot-sunxi/board/sunxi/dram_forfun_q88db.c ---- u-boot-2014.04/board/sunxi/dram_forfun_q88db.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_forfun_q88db.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include "common.h" -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 384, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 16, -+ .cas = 9, -+ .zq = 0x7b, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_gooseberry_a721.c u-boot-sunxi/board/sunxi/dram_gooseberry_a721.c ---- u-boot-2014.04/board/sunxi/dram_gooseberry_a721.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_gooseberry_a721.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 360, -+ .type = 3, -+ .rank_num = 1, -+ .density = 1024, -+ .io_width = 8, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_h6.c u-boot-sunxi/board/sunxi/dram_h6.c ---- u-boot-2014.04/board/sunxi/dram_h6.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_h6.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 360, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_hackberry.c u-boot-sunxi/board/sunxi/dram_hackberry.c ---- u-boot-2014.04/board/sunxi/dram_hackberry.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_hackberry.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 408, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 1, -+ .size = 1024, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_icou_fatty_i.c u-boot-sunxi/board/sunxi/dram_icou_fatty_i.c ---- u-boot-2014.04/board/sunxi/dram_icou_fatty_i.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_icou_fatty_i.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include "common.h" -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 384, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 0x7f, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 1, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_inet_k70hc.c u-boot-sunxi/board/sunxi/dram_inet_k70hc.c ---- u-boot-2014.04/board/sunxi/dram_inet_k70hc.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_inet_k70hc.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 384, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 0x12331a7f, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 1, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_linksprite_pcduino3.c u-boot-sunxi/board/sunxi/dram_linksprite_pcduino3.c ---- u-boot-2014.04/board/sunxi/dram_linksprite_pcduino3.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_linksprite_pcduino3.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 480, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 0x7a, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0x0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_megafeis_a08.c u-boot-sunxi/board/sunxi/dram_megafeis_a08.c ---- u-boot-2014.04/board/sunxi/dram_megafeis_a08.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_megafeis_a08.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 432, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 16, -+ .cas = 9, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_merrii_m2.c u-boot-sunxi/board/sunxi/dram_merrii_m2.c ---- u-boot-2014.04/board/sunxi/dram_merrii_m2.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_merrii_m2.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 432, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 127, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0x0, -+ .tpr4 = 0x0, -+ .tpr5 = 0x0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0x0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_mini_x_a10s.c u-boot-sunxi/board/sunxi/dram_mini_x_a10s.c ---- u-boot-2014.04/board/sunxi/dram_mini_x_a10s.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_mini_x_a10s.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 432, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_mk802_a10s.c u-boot-sunxi/board/sunxi/dram_mk802_a10s.c ---- u-boot-2014.04/board/sunxi/dram_mk802_a10s.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_mk802_a10s.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 432, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 8, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_mk802ii_a20.c u-boot-sunxi/board/sunxi/dram_mk802ii_a20.c ---- u-boot-2014.04/board/sunxi/dram_mk802ii_a20.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_mk802ii_a20.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include "common.h" -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 360, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 0x7f, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_olimex_a13_som.c u-boot-sunxi/board/sunxi/dram_olimex_a13_som.c ---- u-boot-2014.04/board/sunxi/dram_olimex_a13_som.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_olimex_a13_som.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,32 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 408, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 16, -+ .cas = 9, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0x10, -+ .emr3 = 0, -+ -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_pov_protab2.c u-boot-sunxi/board/sunxi/dram_pov_protab2.c ---- u-boot-2014.04/board/sunxi/dram_pov_protab2.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_pov_protab2.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 432, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_pov_protab2_xxl.c u-boot-sunxi/board/sunxi/dram_pov_protab2_xxl.c ---- u-boot-2014.04/board/sunxi/dram_pov_protab2_xxl.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_pov_protab2_xxl.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 432, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_pov_tab_p703.c u-boot-sunxi/board/sunxi/dram_pov_tab_p703.c ---- u-boot-2014.04/board/sunxi/dram_pov_tab_p703.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_pov_tab_p703.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 360, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 16, -+ .cas = 9, -+ .zq = 0x56b9697b, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_r7dongle.c u-boot-sunxi/board/sunxi/dram_r7dongle.c ---- u-boot-2014.04/board/sunxi/dram_r7dongle.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_r7dongle.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 384, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 8, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x04, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sanei_n90.c u-boot-sunxi/board/sunxi/dram_sanei_n90.c ---- u-boot-2014.04/board/sunxi/dram_sanei_n90.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sanei_n90.c 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,30 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 456, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 8, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 1, -+ .size = 1024, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_semitime_g2.c u-boot-sunxi/board/sunxi/dram_semitime_g2.c ---- u-boot-2014.04/board/sunxi/dram_semitime_g2.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_semitime_g2.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include "common.h" -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 432, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 0x7b, -+ .odt_en = 0, -+ .size = 1024, /* in MiB */ -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0x00, -+ .tpr4 = 0x00, -+ .tpr5 = 0x00, -+ .emr1 = 0x00, -+ .emr2 = 0x10, -+ .emr3 = 0x00, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_312_1024_iow8.c u-boot-sunxi/board/sunxi/dram_sun4i_312_1024_iow8.c ---- u-boot-2014.04/board/sunxi/dram_sun4i_312_1024_iow8.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun4i_312_1024_iow8.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 312, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 8, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_360_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun4i_360_1024_iow16.c ---- u-boot-2014.04/board/sunxi/dram_sun4i_360_1024_iow16.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun4i_360_1024_iow16.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 360, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_360_1024_iow8.c u-boot-sunxi/board/sunxi/dram_sun4i_360_1024_iow8.c ---- u-boot-2014.04/board/sunxi/dram_sun4i_360_1024_iow8.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun4i_360_1024_iow8.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 360, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 8, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_360_512.c u-boot-sunxi/board/sunxi/dram_sun4i_360_512.c ---- u-boot-2014.04/board/sunxi/dram_sun4i_360_512.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun4i_360_512.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 360, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_384_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun4i_384_1024_iow16.c ---- u-boot-2014.04/board/sunxi/dram_sun4i_384_1024_iow16.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun4i_384_1024_iow16.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 384, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_384_1024_iow8.c u-boot-sunxi/board/sunxi/dram_sun4i_384_1024_iow8.c ---- u-boot-2014.04/board/sunxi/dram_sun4i_384_1024_iow8.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun4i_384_1024_iow8.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 384, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 8, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_408_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun4i_408_1024_iow16.c ---- u-boot-2014.04/board/sunxi/dram_sun4i_408_1024_iow16.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun4i_408_1024_iow16.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 408, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_408_1024_iow8.c u-boot-sunxi/board/sunxi/dram_sun4i_408_1024_iow8.c ---- u-boot-2014.04/board/sunxi/dram_sun4i_408_1024_iow8.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun4i_408_1024_iow8.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 408, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 8, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_408_512.c u-boot-sunxi/board/sunxi/dram_sun4i_408_512.c ---- u-boot-2014.04/board/sunxi/dram_sun4i_408_512.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun4i_408_512.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 408, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 0x7b, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun5i_408_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun5i_408_1024_iow16.c ---- u-boot-2014.04/board/sunxi/dram_sun5i_408_1024_iow16.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun5i_408_1024_iow16.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 408, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 0x7b, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun5i_408_512_busw16_iow8.c u-boot-sunxi/board/sunxi/dram_sun5i_408_512_busw16_iow8.c ---- u-boot-2014.04/board/sunxi/dram_sun5i_408_512_busw16_iow8.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun5i_408_512_busw16_iow8.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 408, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 8, -+ .bus_width = 16, -+ .cas = 9, -+ .zq = 123, -+ .odt_en = 1, -+ .size = 512, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun5i_432_512_busw16_iow16.c u-boot-sunxi/board/sunxi/dram_sun5i_432_512_busw16_iow16.c ---- u-boot-2014.04/board/sunxi/dram_sun5i_432_512_busw16_iow16.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun5i_432_512_busw16_iow16.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 432, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 16, -+ .cas = 9, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_360_512_busw16_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_360_512_busw16_iow16.c ---- u-boot-2014.04/board/sunxi/dram_sun7i_360_512_busw16_iow16.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun7i_360_512_busw16_iow16.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include "common.h" -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 360, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 16, -+ .cas = 9, -+ .zq = 0x7f, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_384_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_384_1024_iow16.c ---- u-boot-2014.04/board/sunxi/dram_sun7i_384_1024_iow16.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun7i_384_1024_iow16.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include "common.h" -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 384, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 0x7f, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_384_512_busw16_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_384_512_busw16_iow16.c ---- u-boot-2014.04/board/sunxi/dram_sun7i_384_512_busw16_iow16.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun7i_384_512_busw16_iow16.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include "common.h" -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 384, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 16, -+ .cas = 9, -+ .zq = 0x7f, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_432_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_432_1024_iow16.c ---- u-boot-2014.04/board/sunxi/dram_sun7i_432_1024_iow16.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun7i_432_1024_iow16.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include "common.h" -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 432, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 0x7f, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 1, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_460_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_460_1024_iow16.c ---- u-boot-2014.04/board/sunxi/dram_sun7i_460_1024_iow16.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_sun7i_460_1024_iow16.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 480, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 0x7f, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0x0, -+ .tpr4 = 0x1, -+ .tpr5 = 0x0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0x0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_wexler_tab_7200.c u-boot-sunxi/board/sunxi/dram_wexler_tab_7200.c ---- u-boot-2014.04/board/sunxi/dram_wexler_tab_7200.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_wexler_tab_7200.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include "common.h" -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 384, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 0x7f, -+ .odt_en = 1, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 1, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_wobo_i5.c u-boot-sunxi/board/sunxi/dram_wobo_i5.c ---- u-boot-2014.04/board/sunxi/dram_wobo_i5.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_wobo_i5.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 432, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 8, -+ .bus_width = 32, -+ .cas = 9, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x04, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_xzpad700.c u-boot-sunxi/board/sunxi/dram_xzpad700.c ---- u-boot-2014.04/board/sunxi/dram_xzpad700.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_xzpad700.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 408, -+ .type = 3, -+ .rank_num = 1, -+ .density = 4096, -+ .io_width = 16, -+ .bus_width = 16, -+ .cas = 9, -+ .zq = 0x56b9487b, -+ .odt_en = 0, -+ .size = 512, -+ .tpr0 = 0x42d899b7, -+ .tpr1 = 0xa090, -+ .tpr2 = 0x22a00, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0x10, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/dram_zatab.c u-boot-sunxi/board/sunxi/dram_zatab.c ---- u-boot-2014.04/board/sunxi/dram_zatab.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/dram_zatab.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,31 @@ -+/* this file is generated, don't edit it yourself */ -+ -+#include -+#include -+ -+static struct dram_para dram_para = { -+ .clock = 432, -+ .type = 3, -+ .rank_num = 1, -+ .density = 2048, -+ .io_width = 8, -+ .bus_width = 32, -+ .cas = 6, -+ .zq = 123, -+ .odt_en = 0, -+ .size = 1024, -+ .tpr0 = 0x30926692, -+ .tpr1 = 0x1090, -+ .tpr2 = 0x1a0c8, -+ .tpr3 = 0, -+ .tpr4 = 0, -+ .tpr5 = 0, -+ .emr1 = 0x4, -+ .emr2 = 0, -+ .emr3 = 0, -+}; -+ -+unsigned long sunxi_dram_init(void) -+{ -+ return dramc_init(&dram_para); -+} -diff -ruN u-boot-2014.04/board/sunxi/gmac.c u-boot-sunxi/board/sunxi/gmac.c ---- u-boot-2014.04/board/sunxi/gmac.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/gmac.c 2014-09-06 16:58:36.165953115 +0200 -@@ -0,0 +1,43 @@ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+int sunxi_gmac_initialize(bd_t *bis) -+{ -+ int pin; -+ struct sunxi_ccm_reg *const ccm = -+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ -+ /* Set up clock gating */ -+ setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC); -+ -+ /* Set MII clock */ -+#ifdef CONFIG_RGMII -+ setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII | -+ CCM_GMAC_CTRL_GPIT_RGMII); -+#else -+ setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_MII | -+ CCM_GMAC_CTRL_GPIT_MII); -+#endif -+ -+ /* Configure pin mux settings for GMAC */ -+ for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) { -+#ifdef CONFIG_RGMII -+ /* skip unused pins in RGMII mode */ -+ if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14)) -+ continue; -+#endif -+ sunxi_gpio_set_cfgpin(pin, SUN7I_GPA0_GMAC); -+ sunxi_gpio_set_drv(pin, 3); -+ } -+ -+#ifdef CONFIG_RGMII -+ return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII); -+#else -+ return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_MII); -+#endif -+} -diff -ruN u-boot-2014.04/board/sunxi/Makefile u-boot-sunxi/board/sunxi/Makefile ---- u-boot-2014.04/board/sunxi/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/board/sunxi/Makefile 2014-09-06 16:58:36.161953116 +0200 -@@ -0,0 +1,95 @@ -+# -+# (C) Copyright 2012 Henrik Nordstrom -+# -+# Based on some other board Makefile -+# -+# (C) Copyright 2000-2003 -+# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+# -+# SPDX-License-Identifier: GPL-2.0+ -+# -+obj-y += board.o -+obj-$(CONFIG_SUNXI_GMAC) += gmac.o -+obj-$(CONFIG_A10_MID_1GB) += dram_sun4i_360_1024_iow16.o -+obj-$(CONFIG_A10_OLINUXINO_L) += dram_a10_olinuxino_l.o -+obj-$(CONFIG_A10S_OLINUXINO_M) += dram_sun5i_432_512_busw16_iow16.o -+obj-$(CONFIG_A13_OLINUXINO) += dram_a13_olinuxino.o -+obj-$(CONFIG_A13_OLINUXINOM) += dram_a13_oli_micro.o -+obj-$(CONFIG_A13_MID) += dram_sun5i_408_512_busw16_iow8.o -+obj-$(CONFIG_A20_OLINUXINO_L) += dram_a20_olinuxino_l.o -+obj-$(CONFIG_A20_OLINUXINO_L2) += dram_a20_olinuxino_l2.o -+obj-$(CONFIG_A20_OLINUXINO_M) += dram_sun7i_384_1024_iow16.o -+obj-$(CONFIG_A20_SOM) += dram_sun7i_384_1024_iow16.o -+obj-$(CONFIG_AINOL_AW1) += dram_ainol_aw1.o -+obj-$(CONFIG_AMPE_A76) += dram_sun5i_432_512_busw16_iow16.o -+obj-$(CONFIG_AUXTEK_T003) += dram_auxtek_t003.o -+obj-$(CONFIG_AUXTEK_T004) += dram_sun5i_432_512_busw16_iow16.o -+obj-$(CONFIG_BA10_TV_BOX) += dram_sun4i_384_1024_iow8.o -+obj-$(CONFIG_COBY_MID7042) += dram_sun4i_408_1024_iow16.o -+obj-$(CONFIG_COBY_MID8042) += dram_sun4i_360_1024_iow16.o -+obj-$(CONFIG_COBY_MID9742) += dram_sun4i_408_1024_iow16.o -+obj-$(CONFIG_MARSBOARD_A10) += dram_sun4i_360_1024_iow16.o -+obj-$(CONFIG_MARSBOARD_A20) += dram_sun4i_360_1024_iow16.o -+obj-$(CONFIG_CUBIEBOARD) += dram_cubieboard.o -+obj-$(CONFIG_CUBIEBOARD2) += dram_sun7i_460_1024_iow16.o -+obj-$(CONFIG_BANANAPI) += dram_sun7i_432_1024_iow16.o -+obj-$(CONFIG_CUBIETRUCK) += dram_cubietruck.o -+obj-$(CONFIG_DNS_M82) += dram_sun4i_360_1024_iow16.o -+obj-$(CONFIG_EOMA68_A10) += dram_sun4i_360_1024_iow8.o -+obj-$(CONFIG_EOMA68_A20) += dram_sun7i_384_1024_iow16.o -+obj-$(CONFIG_EU3000) += dram_eu3000.o -+obj-$(CONFIG_FORFUN_Q88DB) += dram_forfun_q88db.o -+obj-$(CONFIG_GOOSEBERRY_A721) += dram_gooseberry_a721.o -+obj-$(CONFIG_H6) += dram_h6.o -+obj-$(CONFIG_HACKBERRY) += dram_hackberry.o -+obj-$(CONFIG_HBD_MID_S906) += dram_sun7i_432_1024_iow16.o -+obj-$(CONFIG_HCORE_HC860) += dram_sun4i_384_1024_iow16.o -+obj-$(CONFIG_HYUNDAI_A7) += dram_sun4i_360_512.o -+obj-$(CONFIG_A7HD) += dram_sun4i_360_1024_iow8.o -+obj-$(CONFIG_I12_TVBOX) += dram_sun7i_384_1024_iow16.o -+obj-$(CONFIG_ICOU_FATTY_I) += dram_icou_fatty_i.o -+obj-$(CONFIG_INTERRA3) += dram_mk802ii_a20.o -+obj-$(CONFIG_INET_86VZ) += dram_sun5i_432_512_busw16_iow16.o -+obj-$(CONFIG_INET97F_II) += dram_sun4i_408_512.o -+obj-$(CONFIG_INET_K70HC) += dram_inet_k70hc.o -+obj-$(CONFIG_ITEADA10) += dram_cubieboard.o -+obj-$(CONFIG_ITEADA20) += dram_sun7i_460_1024_iow16.o -+obj-$(CONFIG_JESURUN_Q5) += dram_sun4i_312_1024_iow8.o -+obj-$(CONFIG_K1001L1C) += dram_sun7i_384_1024_iow16.o -+obj-$(CONFIG_KURIO_7S) += dram_sun7i_432_1024_iow16.o -+obj-$(CONFIG_LANGCENT_H6S) += dram_sun7i_360_512_busw16_iow16.o -+obj-$(CONFIG_LINKSPRITE_PCDUINO3) += dram_linksprite_pcduino3.o -+obj-$(CONFIG_MEFAFEIS_A08) += dram_megafeis_a08.o -+obj-$(CONFIG_MELE_A1000) += dram_sun4i_360_512.o -+obj-$(CONFIG_MELE_A1000G) += dram_sun4i_360_1024_iow8.o -+obj-$(CONFIG_MELE_A3700) += dram_sun4i_360_1024_iow8.o -+obj-$(CONFIG_MERRII_HUMMINGBIRD_A20) += dram_sun7i_460_1024_iow16.o -+obj-$(CONFIG_MINI_X) += dram_sun4i_360_512.o -+obj-$(CONFIG_MINI_X_1GB) += dram_sun4i_360_1024_iow16.o -+obj-$(CONFIG_MINI_X_A10S) += dram_mini_x_a10s.o -+obj-$(CONFIG_MK802) += dram_sun4i_360_512.o -+obj-$(CONFIG_MK802_1GB) += dram_sun4i_360_1024_iow16.o -+obj-$(CONFIG_MK802_A10S) += dram_mk802_a10s.o -+obj-$(CONFIG_MK802II) += dram_sun4i_408_1024_iow8.o -+obj-$(CONFIG_MK802II_A20) += dram_mk802ii_a20.o -+obj-$(CONFIG_MK808C_A20) += dram_sun7i_384_1024_iow16.o -+obj-$(CONFIG_OLIMEX_A13_SOM) += dram_olimex_a13_som.o -+obj-$(CONFIG_PCDUINO) += dram_sun4i_408_1024_iow8.o -+obj-$(CONFIG_PENGPOD700) += dram_sun4i_384_1024_iow8.o -+obj-$(CONFIG_PENGPOD1000) += dram_sun4i_408_1024_iow16.o -+obj-$(CONFIG_PINERIVER-H25) += dram_sun5i_408_1024_iow16.o -+obj-$(CONFIG_POV_TAB_P703) += dram_pov_tab_p703.o -+obj-$(CONFIG_POV_PROTAB2) += dram_pov_protab2.o -+obj-$(CONFIG_POV_PROTAB2_XXL) += dram_pov_protab2_xxl.o -+obj-$(CONFIG_QT840A) += dram_sun7i_384_512_busw16_iow16.o -+obj-$(CONFIG_R7DONGLE) += dram_r7dongle.o -+obj-$(CONFIG_SANEI_N90) += dram_sanei_n90.o -+obj-$(CONFIG_SEMITIME_G2) += dram_semitime_g2.o -+obj-$(CONFIG_TZX_Q8_713B6) += dram_sun5i_408_512_busw16_iow8.o -+obj-$(CONFIG_TZX_Q8_713B7) += dram_sun5i_408_512_busw16_iow8.o -+obj-$(CONFIG_UHOST_U1A) += dram_sun4i_360_1024_iow8.o -+obj-$(CONFIG_WEXLER_TAB_7200) += dram_wexler_tab_7200.o -+obj-$(CONFIG_WOBO_I5) += dram_wobo_i5.o -+obj-$(CONFIG_XZPAD700) += dram_xzpad700.o -+obj-$(CONFIG_ZATAB) += dram_zatab.o -+obj-$(CONFIG_MERRII_M2) += dram_merrii_m2.o -diff -ruN u-boot-2014.04/boards.cfg u-boot-sunxi/boards.cfg ---- u-boot-2014.04/boards.cfg 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/boards.cfg 2014-09-06 16:58:36.185953115 +0200 -@@ -371,6 +371,111 @@ - Active arm armv7 s5pc1xx samsung goni s5p_goni - Mateusz Zalega - Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang - Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - - -+Active arm armv7 sunxi - sunxi A10_MID_1GB sun4i:A10_MID_1GB,SPL - -+Active arm armv7 sunxi - sunxi A10-OLinuXino-Lime sun4i:A10_OLINUXINO_L,STATUSLED=226,SPL,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi A10s-OLinuXino-M sun5i:A10S_OLINUXINO_M,STATUSLED=131,AXP152_POWER,CONS_INDEX=1,SPL,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi A10s-OLinuXino-M_FEL sun5i:A10S_OLINUXINO_M,STATUSLED=131,AXP152_POWER,CONS_INDEX=1,SPL_FEL,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi A13-OLinuXino sun5i:A13_OLINUXINO,SPL,STATUSLED=201,CONS_INDEX=2 - -+Active arm armv7 sunxi - sunxi A13-OLinuXino_FEL sun5i:A13_OLINUXINO,SPL_FEL,STATUSLED=201,CONS_INDEX=2 - -+Active arm armv7 sunxi - sunxi A13-OLinuXino_FEL_sdcon sun5i:A13_OLINUXINO,SPL_FEL,STATUSLED=201,UART0_PORT_F - -+Active arm armv7 sunxi - sunxi A13-OLinuXinoM sun5i:A13_OLINUXINOM,SPL,NO_AXP,STATUSLED=201,CONS_INDEX=2 - -+Active arm armv7 sunxi - sunxi A13-OLinuXinoM_FEL sun5i:A13_OLINUXINOM,SPL_FEL,NO_AXP,STATUSLED=201,CONS_INDEX=2 - -+Active arm armv7 sunxi - sunxi A13_MID sun5i:A13_MID,SPL,CONS_INDEX=2 - -+Active arm armv7 sunxi - sunxi A20-OLinuXino_Lime sun7i:A20_OLINUXINO_L,CONS_INDEX=1,STATUSLED=226,SPL,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi A20-OLinuXino_Lime2 sun7i:A20_OLINUXINO_L2,CONS_INDEX=1,STATUSLED=226,SPL,SUNXI_GMAC - -+Active arm armv7 sunxi - sunxi A20-OLinuXino_MICRO sun7i:A20_OLINUXINO_M,CONS_INDEX=1,STATUSLED=226,SPL,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi A20-OLinuXino_MICRO_FEL sun7i:A20_OLINUXINO_M,CONS_INDEX=1,STATUSLED=226,SPL_FEL,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi A20-SOM sun7i:A20_SOM,SPL,SUNXI_GMAC,RGMII,STATUSLED1=245,FAST_MBUS - -+Active arm armv7 sunxi - sunxi Ainol_AW1 sun7i:AINOL_AW1,SPL - -+Active arm armv7 sunxi - sunxi Ampe_A76 sun5i:AMPE_A76,SPL,CONS_INDEX=2 - -+Active arm armv7 sunxi - sunxi Auxtek-T003 sun5i:AUXTEK_T003,SPL,AXP152_POWER,STATUSLED=34 - -+Active arm armv7 sunxi - sunxi Auxtek-T004 sun5i:AUXTEK_T004,SPL,AXP152_POWER,STATUSLED=34 - -+Active arm armv7 sunxi - sunxi ba10_tv_box sun4i:BA10_TV_BOX,SPL,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi Bananapi sun7i:BANANAPI,SPL,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),STATUSLED=244,STATUSLED1=245,FAST_MBUS - -+Active arm armv7 sunxi - sunxi Bananapi_FEL sun7i:BANANAPI,SPL_FEL,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),STATUSLED=244,STATUSLED1=245,FAST_MBUS - -+Active arm armv7 sunxi - sunxi Coby_MID7042 sun4i:COBY_MID7042,SPL - -+Active arm armv7 sunxi - sunxi Coby_MID8042 sun4i:COBY_MID8042,SPL - -+Active arm armv7 sunxi - sunxi Coby_MID9742 sun4i:COBY_MID9742,SPL - -+Active arm armv7 sunxi - sunxi Iteaduino_Plus_A10 sun4i:ITEADA10,SPL,SUNXI_EMAC,STATUSLED=244,STATUSLED1=245 - -+Active arm armv7 sunxi - sunxi Iteaduino_Plus_A20 sun7i:ITEADA20,SPL,SUNXI_EMAC,STATUSLED=244,STATUSLED1=245 - -+Active arm armv7 sunxi - sunxi Colombus sun6i:COLOMBUS,AXP221_POWER,ENABLE_DLDO1_POWER - -+Active arm armv7 sunxi - sunxi Ippo_q8h sun8i:IPPO_Q8H,NO_AXP,CONS_INDEX=5 - -+Active arm armv7 sunxi - sunxi Cubieboard sun4i:CUBIEBOARD,SPL,SUNXI_EMAC,STATUSLED=244,STATUSLED1=245 - -+Active arm armv7 sunxi - sunxi Cubieboard2 sun7i:CUBIEBOARD2,SPL,SUNXI_GMAC,STATUSLED=244,STATUSLED1=245,FAST_MBUS - -+Active arm armv7 sunxi - sunxi Cubieboard2_FEL sun7i:CUBIEBOARD2,SPL_FEL,SUNXI_GMAC,STATUSLED=244,STATUSLED1=245,FAST_MBUS - -+Active arm armv7 sunxi - sunxi Cubietruck sun7i:CUBIETRUCK,SPL,SUNXI_GMAC,RGMII,STATUSLED=245,STATUSLED1=244,STATUSLED2=235,STATUSLED3=231,FAST_MBUS - -+Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL,SUNXI_GMAC,RGMII,STATUSLED=245,STATUSLED1=244,STATUSLED2=235,STATUSLED3=231,FAST_MBUS - -+Active arm armv7 sunxi - sunxi Cubieboard_FEL sun4i:CUBIEBOARD,SPL_FEL,SUNXI_EMAC,STATUSLED=244,STATUSLED1=245 - -+Active arm armv7 sunxi - sunxi DNS_M82 sun4i:DNS_M82,SPL - -+Active arm armv7 sunxi - sunxi EOMA68_A10 sun4i:EOMA68_A10,SPL,MMC_SUNXI_SLOT=3,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi EOMA68_A10_FEL sun4i:EOMA68_A10,SPL_FEL,MMC_SUNXI_SLOT=3,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi EOMA68_A20 sun7i:EOMA68_A20,SPL,MMC_SUNXI_SLOT=3,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi EOMA68_A20_FEL sun7i:EOMA68_A20,SPL_FEL,MMC_SUNXI_SLOT=3,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi EU3000 sun7i:EU3000,SPL - -+Active arm armv7 sunxi - sunxi Forfun_Q88DB sun7i:FORFUN_Q88DB,SPL - -+Active arm armv7 sunxi - sunxi Gooseberry_A721 sun4i:GOOSEBERRY_A721,SPL - -+Active arm armv7 sunxi - sunxi H6 sun4i:H6,SPL - -+Active arm armv7 sunxi - sunxi Hackberry sun4i:HACKBERRY,SPL,SUNXI_EMAC,MACPWR=SUNXI_GPH(19) - -+Active arm armv7 sunxi - sunxi HBD_MID_S906 sun7i:HBD_MID_S906,SPL - -+Active arm armv7 sunxi - sunxi HCore_HC860 sun4i:HCORE_HC860,SPL - -+Active arm armv7 sunxi - sunxi Hyundai_A7 sun4i:HYUNDAI_A7,SPL - -+Active arm armv7 sunxi - sunxi Hyundai_A7HD sun4i:A7HD,SPL - -+Active arm armv7 sunxi - sunxi i12-tvbox sun7i:I12_TVBOX,SPL,FAST_MBUS,STATUSLED=244 - -+Active arm armv7 sunxi - sunxi ICOU_Fatty_I sun7i:ICOU_FATTY_I,SPL - -+Active arm armv7 sunxi - sunxi Interra-3 sun7i:INTERRA3,SPL,SUNXI_GMAC,FAST_MBUS,MMC_SUNXI_SLOT=2 - -+Active arm armv7 sunxi - sunxi INet_86VZ sun5i:INET_86VZ,SPL - -+Active arm armv7 sunxi - sunxi INet_86VZ_FEL sun5i:INET_86VZ,SPL_FEL,UART0_PORT_F - -+Active arm armv7 sunxi - sunxi INet97F-II sun4i:INET97F_II,SPL - -+Active arm armv7 sunxi - sunxi INet_K70HC sun7i:INET_K70HC,SPL - -+Active arm armv7 sunxi - sunxi Jesurun-Q5 sun4i:JESURUN_Q5,SPL,SUNXI_EMAC,STATUSLED=244 - -+Active arm armv7 sunxi - sunxi K1001L1C sun7i:K1001L1C,SPL - -+Active arm armv7 sunxi - sunxi Kurio_7S sun7i:KURIO_7S,SPL - -+Active arm armv7 sunxi - sunxi Langcent_H6S sun7i:LANGCENT_H6S,SPL - -+Active arm armv7 sunxi - sunxi Linksprite_pcDuino3 sun7i:LINKSPRITE_PCDUINO3,SPL,SUNXI_GMAC,FAST_MBUS - -+Active arm armv7 sunxi - sunxi Marsboard_A10 sun4i:MARSBOARD_A10,SPL,SUNXI_EMAC,NO_AXP - -+Active arm armv7 sunxi - sunxi Marsboard_A20 sun7i:MARSBOARD_A20,SPL,SUNXI_EMAC,NO_AXP - -+Active arm armv7 sunxi - sunxi Marsboard_A20_debug sun7i:MARSBOARD_A20,SPL,SUNXI_EMAC,NO_AXP,SYS_SECONDARY_ON - -+Active arm armv7 sunxi - sunxi Megafeis_A08 sun5i:MEFAFEIS_A08,SPL - -+Active arm armv7 sunxi - sunxi Mele_A1000 sun4i:MELE_A1000,SPL,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),STATUSLED=234 - -+Active arm armv7 sunxi - sunxi Mele_A1000_FEL sun4i:MELE_A1000,SPL_FEL,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),STATUSLED=234 - -+Active arm armv7 sunxi - sunxi Mele_A1000G sun4i:MELE_A1000G,SPL,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),STATUSLED=234 - -+Active arm armv7 sunxi - sunxi Mele_A3700 sun4i:MELE_A3700,SPL,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),STATUSLED=234 - -+Active arm armv7 sunxi - sunxi Merrii_Hummingbird_A20 sun7i:MERRII_HUMMINGBIRD_A20,SPL - -+Active arm armv7 sunxi - sunxi merrii_m2 sun7i:MERRII_M2,SPL,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi Mini-X sun4i:MINI_X,SPL - -+Active arm armv7 sunxi - sunxi Mini-X-1Gb sun4i:MINI_X_1GB,SPL - -+Active arm armv7 sunxi - sunxi Mini-X_A10s sun5i:MINI_X_A10S,SPL - -+Active arm armv7 sunxi - sunxi mk802 sun4i:MK802,SPL,NO_AXP - -+Active arm armv7 sunxi - sunxi mk802-1gb sun4i:MK802_1GB,SPL,NO_AXP - -+Active arm armv7 sunxi - sunxi mk802_a10s sun5i:MK802_A10S,SPL,AXP152_POWER,STATUSLED=34 - -+Active arm armv7 sunxi - sunxi mk802ii_A20 sun7i:MK802II_A20,SPL - -+Active arm armv7 sunxi - sunxi mk802ii sun4i:MK802II,SPL - -+Active arm armv7 sunxi - sunxi mk808c_A20 sun7i:MK808C_A20,SPL - -+Active arm armv7 sunxi - sunxi OLIMEX-A13-SOM sun5i:OLIMEX_A13_SOM,SPL,NO_AXP,STATUSLED=201,CONS_INDEX=2 - -+Active arm armv7 sunxi - sunxi pcDuino sun4i:PCDUINO,SPL,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi pengpod1000 sun4i:PENGPOD1000,SPL - -+Active arm armv7 sunxi - sunxi pengpod700 sun4i:PENGPOD700,SPL - -+Active arm armv7 suxni - sunxi pineriver-h25 sun5i:PINERIVER-H25,SPL -+Active arm armv7 sunxi - sunxi POV_TAB_P703 sun5i:POV_TAB_P703,SPL - -+Active arm armv7 sunxi - sunxi PoV_ProTab2_IPS9 sun4i:POV_PROTAB2,SPL - -+Active arm armv7 sunxi - sunxi PoV_ProTab2_IPS_3g sun4i:POV_PROTAB2,SPL - -+Active arm armv7 sunxi - sunxi PoV_ProTab2_XXL sun4i:POV_PROTAB2_XXL,SPL - -+Active arm armv7 sunxi - sunxi qt840a sun7i:QT840A,SPL,FAST_MBUS,STATUSLED=244 - -+Active arm armv7 sunxi - sunxi r7-tv-dongle sun5i:R7DONGLE,SPL,AXP152_POWER,STATUSLED=34 - -+Active arm armv7 sunxi - sunxi Sanei_N90 sun4i:SANEI_N90,SPL - -+Active arm armv7 sunxi - sunxi Semitime_G2 sun5i:SEMITIME_G2,SPL,AXP152_POWER,STATUSLED=34 - -+Active arm armv7 sunxi - sunxi sun4i sun4i:SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi sun4i_sdcon sun4i:UART0_PORT_F,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi sun5i sun5i:SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi sun5i_sdcon sun5i:UART0_PORT_F,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi sun5i_uart1 sun5i:CONS_INDEX=2,SUNXI_EMAC - -+Active arm armv7 sunxi - sunxi TZX-Q8-713B6 sun5i:TZX_Q8_713B6,SPL,CONS_INDEX=2 - -+Active arm armv7 sunxi - sunxi TZX-Q8-713B7 sun5i:TZX_Q8_713B7,SPL,CONS_INDEX=2 - -+Active arm armv7 sunxi - sunxi uhost_u1a sun4i:UHOST_U1A,SPL,STATUSLED=34 - -+Active arm armv7 sunxi - sunxi Wexler_TAB_7200 sun7i:WEXLER_TAB_7200,SPL - -+Active arm armv7 sunxi - sunxi wobo-i5 sun5i:WOBO_I5,SPL,STATUSLED=34 - -+Active arm armv7 sunxi - sunxi xzpad700 sun5i:XZPAD700,SPL - -+Active arm armv7 sunxi - sunxi zatab sun4i:ZATAB,SPL - - Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier - Active arm armv7 u8500 st-ericsson u8500 u8500_href - - - Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang -diff -ruN u-boot-2014.04/common/spl/spl_mmc.c u-boot-sunxi/common/spl/spl_mmc.c ---- u-boot-2014.04/common/spl/spl_mmc.c 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/common/spl/spl_mmc.c 2014-09-06 16:58:36.205953114 +0200 -@@ -29,8 +29,10 @@ - if (err == 0) - goto end; - -- if (image_get_magic(header) != IH_MAGIC) -+ if (image_get_magic(header) != IH_MAGIC) { -+ printf("spl: not an uImage at %lu\n", sector); - return -1; -+ } - - spl_parse_image_header(header); - -diff -ruN u-boot-2014.04/drivers/gpio/Makefile u-boot-sunxi/drivers/gpio/Makefile ---- u-boot-2014.04/drivers/gpio/Makefile 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/drivers/gpio/Makefile 2014-09-06 16:58:36.253953113 +0200 -@@ -34,3 +34,4 @@ - obj-$(CONFIG_ADI_GPIO2) += adi_gpio2.o - obj-$(CONFIG_TCA642X) += tca642x.o - oby-$(CONFIG_SX151X) += sx151x.o -+obj-$(CONFIG_SUNXI_GPIO) += sunxi_gpio.o -diff -ruN u-boot-2014.04/drivers/gpio/sunxi_gpio.c u-boot-sunxi/drivers/gpio/sunxi_gpio.c ---- u-boot-2014.04/drivers/gpio/sunxi_gpio.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/drivers/gpio/sunxi_gpio.c 2014-09-06 16:58:36.253953113 +0200 -@@ -0,0 +1,102 @@ -+/* -+ * (C) Copyright 2012 Henrik Nordstrom -+ * -+ * Based on earlier arch/arm/cpu/armv7/sunxi/gpio.c: -+ * -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+ -+static int sunxi_gpio_output(u32 pin, u32 val) -+{ -+ u32 dat; -+ u32 bank = GPIO_BANK(pin); -+ u32 num = GPIO_NUM(pin); -+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank); -+ -+ dat = readl(&pio->dat); -+ if (val) -+ dat |= 0x1 << num; -+ else -+ dat &= ~(0x1 << num); -+ -+ writel(dat, &pio->dat); -+ -+ return 0; -+} -+ -+static int sunxi_gpio_input(u32 pin) -+{ -+ u32 dat; -+ u32 bank = GPIO_BANK(pin); -+ u32 num = GPIO_NUM(pin); -+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank); -+ -+ dat = readl(&pio->dat); -+ dat >>= num; -+ -+ return dat & 0x1; -+} -+ -+int gpio_request(unsigned gpio, const char *label) -+{ -+ return 0; -+} -+ -+int gpio_free(unsigned gpio) -+{ -+ return 0; -+} -+ -+int gpio_direction_input(unsigned gpio) -+{ -+ sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_INPUT); -+ -+ return sunxi_gpio_input(gpio); -+} -+ -+int gpio_direction_output(unsigned gpio, int value) -+{ -+ sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_OUTPUT); -+ -+ return sunxi_gpio_output(gpio, value); -+} -+ -+int gpio_get_value(unsigned gpio) -+{ -+ return sunxi_gpio_input(gpio); -+} -+ -+int gpio_set_value(unsigned gpio, int value) -+{ -+ return sunxi_gpio_output(gpio, value); -+} -+ -+int sunxi_name_to_gpio(const char *name) -+{ -+ int group = 0; -+ int groupsize = 9 * 32; -+ long pin; -+ char *eptr; -+ if (*name == 'P' || *name == 'p') -+ name++; -+ if (*name >= 'A') { -+ group = *name - (*name > 'a' ? 'a' : 'A'); -+ groupsize = 32; -+ name++; -+ } -+ -+ pin = simple_strtol(name, &eptr, 10); -+ if (!*name || *eptr) -+ return -1; -+ if (pin < 0 || pin > groupsize || group >= 9) -+ return -1; -+ return group * 32 + pin; -+} -diff -ruN u-boot-2014.04/drivers/i2c/Makefile u-boot-sunxi/drivers/i2c/Makefile ---- u-boot-2014.04/drivers/i2c/Makefile 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/drivers/i2c/Makefile 2014-09-06 16:58:36.265953112 +0200 -@@ -27,5 +27,6 @@ - obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o - obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o - obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o -+obj-$(CONFIG_SYS_I2C_SUNXI) += mvtwsi.o - obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o - obj-$(CONFIG_SYS_I2C_ZYNQ) += zynq_i2c.o -diff -ruN u-boot-2014.04/drivers/i2c/mvtwsi.c u-boot-sunxi/drivers/i2c/mvtwsi.c ---- u-boot-2014.04/drivers/i2c/mvtwsi.c 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/drivers/i2c/mvtwsi.c 2014-09-06 16:58:36.265953112 +0200 -@@ -22,6 +22,8 @@ - #include - #elif defined(CONFIG_KIRKWOOD) - #include -+#elif defined(CONFIG_SUNXI) -+#include - #else - #error Driver mvtwsi not supported by SoC or board - #endif -@@ -30,6 +32,20 @@ - * TWSI register structure - */ - -+#ifdef CONFIG_SUNXI -+ -+struct mvtwsi_registers { -+ u32 slave_address; -+ u32 xtnd_slave_addr; -+ u32 data; -+ u32 control; -+ u32 status; -+ u32 baudrate; -+ u32 soft_reset; -+}; -+ -+#else -+ - struct mvtwsi_registers { - u32 slave_address; - u32 data; -@@ -43,6 +59,8 @@ - u32 soft_reset; - }; - -+#endif -+ - /* - * Control register fields - */ -@@ -216,21 +234,7 @@ - */ - - #define TWSI_FREQUENCY(m, n) \ -- ((u8) (CONFIG_SYS_TCLK / (10 * (m + 1) * 2 * (1 << n)))) -- --/* -- * These are required to be reprogrammed before enabling the controller -- * because a reset loses them. -- * Default values come from the spec, but a twsi_reset will change them. -- * twsi_slave_address left uninitialized lest checkpatch.pl complains. -- */ -- --/* Baudrate generator: m (bits 7..4) =4, n (bits 3..0) =4 */ --static u8 twsi_baud_rate = 0x44; /* baudrate at controller reset */ --/* Default frequency corresponding to default m=4, n=4 */ --static u8 twsi_actual_speed = TWSI_FREQUENCY(4, 4); --/* Default slave address is 0 (so is an uninitialized static) */ --static u8 twsi_slave_address; -+ (CONFIG_SYS_TCLK / (10 * (m + 1) * (1 << n))) - - /* - * Reset controller. -@@ -238,7 +242,7 @@ - * Controller reset also resets the baud rate and slave address, so - * re-establish them. - */ --static void twsi_reset(void) -+static void twsi_reset(u8 baud_rate, u8 slave_address) - { - /* ensure controller will be enabled by any twsi*() function */ - twsi_control_flags = MVTWSI_CONTROL_TWSIEN; -@@ -247,9 +251,9 @@ - /* wait 2 ms -- this is what the Marvell LSP does */ - udelay(20000); - /* set baud rate */ -- writel(twsi_baud_rate, &twsi->baudrate); -+ writel(baud_rate, &twsi->baudrate); - /* set slave address even though we don't use it */ -- writel(twsi_slave_address, &twsi->slave_address); -+ writel(slave_address, &twsi->slave_address); - writel(0, &twsi->xtnd_slave_addr); - /* assert STOP but don't care for the result */ - (void) twsi_stop(0); -@@ -277,12 +281,8 @@ - } - } - } -- /* save baud rate and slave for later calls to twsi_reset */ -- twsi_baud_rate = baud; -- twsi_actual_speed = highest_speed; -- twsi_slave_address = slaveadd; - /* reset controller */ -- twsi_reset(); -+ twsi_reset(baud, slaveadd); - } - - /* -diff -ruN u-boot-2014.04/drivers/mmc/Makefile u-boot-sunxi/drivers/mmc/Makefile ---- u-boot-2014.04/drivers/mmc/Makefile 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/drivers/mmc/Makefile 2014-09-06 16:58:36.281953112 +0200 -@@ -28,6 +28,7 @@ - obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o - obj-$(CONFIG_DWMMC) += dw_mmc.o - obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o -+obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o - obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o - obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o - ifdef CONFIG_SPL_BUILD -diff -ruN u-boot-2014.04/drivers/mmc/sunxi_mmc.c u-boot-sunxi/drivers/mmc/sunxi_mmc.c ---- u-boot-2014.04/drivers/mmc/sunxi_mmc.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/drivers/mmc/sunxi_mmc.c 2014-09-06 16:58:36.281953112 +0200 -@@ -0,0 +1,385 @@ -+/* -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Aaron -+ * -+ * MMC driver for allwinner sunxi platform. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+struct sunxi_mmc_host { -+ unsigned mmc_no; -+ uint32_t *mclkreg; -+ unsigned database; -+ unsigned fatal_err; -+ unsigned mod_clk; -+ struct sunxi_mmc *reg; -+ struct mmc_config cfg; -+}; -+ -+/* support 4 mmc hosts */ -+struct sunxi_mmc_host mmc_host[4]; -+ -+static int mmc_resource_init(int sdc_no) -+{ -+ struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no]; -+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ -+ debug("init mmc %d resource\n", sdc_no); -+ -+ switch (sdc_no) { -+ case 0: -+ mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE; -+ mmchost->mclkreg = &ccm->sd0_clk_cfg; -+ break; -+ case 1: -+ mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE; -+ mmchost->mclkreg = &ccm->sd1_clk_cfg; -+ break; -+ case 2: -+ mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE; -+ mmchost->mclkreg = &ccm->sd2_clk_cfg; -+ break; -+ case 3: -+ mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE; -+ mmchost->mclkreg = &ccm->sd3_clk_cfg; -+ break; -+ default: -+ printf("Wrong mmc number %d\n", sdc_no); -+ return -1; -+ } -+#ifdef CONFIG_SUN6I -+ mmchost->database = (unsigned int)mmchost->reg + 0x200; -+#else -+ mmchost->database = (unsigned int)mmchost->reg + 0x100; -+#endif -+ mmchost->mmc_no = sdc_no; -+ -+ return 0; -+} -+ -+static int mmc_clk_io_on(int sdc_no) -+{ -+ unsigned int pll_clk; -+ unsigned int divider; -+ struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no]; -+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ -+ debug("init mmc %d clock and io\n", sdc_no); -+ -+ /* config ahb clock */ -+ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no)); -+ -+#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) -+ /* unassert reset */ -+ setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no)); -+#endif -+ -+ /* config mod clock */ -+ pll_clk = clock_get_pll6(); -+ /* should be close to 100 MHz but no more, so round up */ -+ divider = ((pll_clk + 99999999) / 100000000) - 1; -+ writel(CCM_MMC_CTRL_ENABLE | CCM_MMC_CTRL_PLL6 | divider, -+ mmchost->mclkreg); -+ mmchost->mod_clk = pll_clk / (divider + 1); -+ -+ return 0; -+} -+ -+static int mmc_update_clk(struct mmc *mmc) -+{ -+ struct sunxi_mmc_host *mmchost = mmc->priv; -+ unsigned int cmd; -+ unsigned timeout_msecs = 2000; -+ -+ cmd = SUNXI_MMC_CMD_START | -+ SUNXI_MMC_CMD_UPCLK_ONLY | -+ SUNXI_MMC_CMD_WAIT_PRE_OVER; -+ writel(cmd, &mmchost->reg->cmd); -+ while (readl(&mmchost->reg->cmd) & SUNXI_MMC_CMD_START) { -+ if (!timeout_msecs--) -+ return -1; -+ udelay(1000); -+ } -+ -+ /* clock update sets various irq status bits, clear these */ -+ writel(readl(&mmchost->reg->rint), &mmchost->reg->rint); -+ -+ return 0; -+} -+ -+static int mmc_config_clock(struct mmc *mmc, unsigned div) -+{ -+ struct sunxi_mmc_host *mmchost = mmc->priv; -+ unsigned rval = readl(&mmchost->reg->clkcr); -+ -+ /* Disable Clock */ -+ rval &= ~SUNXI_MMC_CLK_ENABLE; -+ writel(rval, &mmchost->reg->clkcr); -+ if (mmc_update_clk(mmc)) -+ return -1; -+ -+ /* Change Divider Factor */ -+ rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK; -+ rval |= div; -+ writel(rval, &mmchost->reg->clkcr); -+ if (mmc_update_clk(mmc)) -+ return -1; -+ /* Re-enable Clock */ -+ rval |= SUNXI_MMC_CLK_ENABLE; -+ writel(rval, &mmchost->reg->clkcr); -+ -+ if (mmc_update_clk(mmc)) -+ return -1; -+ -+ return 0; -+} -+ -+static void mmc_set_ios(struct mmc *mmc) -+{ -+ struct sunxi_mmc_host *mmchost = mmc->priv; -+ unsigned int clkdiv = 0; -+ -+ debug("set ios: bus_width: %x, clock: %d, mod_clk: %d\n", -+ mmc->bus_width, mmc->clock, mmchost->mod_clk); -+ -+ /* Change clock first */ -+ clkdiv = (mmchost->mod_clk + (mmc->clock >> 1)) / mmc->clock / 2; -+ if (mmc->clock) { -+ if (mmc_config_clock(mmc, clkdiv)) { -+ mmchost->fatal_err = 1; -+ return; -+ } -+ } -+ -+ /* Change bus width */ -+ if (mmc->bus_width == 8) -+ writel(0x2, &mmchost->reg->width); -+ else if (mmc->bus_width == 4) -+ writel(0x1, &mmchost->reg->width); -+ else -+ writel(0x0, &mmchost->reg->width); -+} -+ -+static int mmc_core_init(struct mmc *mmc) -+{ -+ struct sunxi_mmc_host *mmchost = mmc->priv; -+ -+ /* Reset controller */ -+ writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl); -+ udelay(1000); -+ -+ return 0; -+} -+ -+static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data) -+{ -+ struct sunxi_mmc_host *mmchost = mmc->priv; -+ const int reading = !!(data->flags & MMC_DATA_READ); -+ const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY : -+ SUNXI_MMC_STATUS_FIFO_FULL; -+ unsigned i; -+ unsigned byte_cnt = data->blocksize * data->blocks; -+ unsigned timeout_msecs = 2000; -+ unsigned *buff = (unsigned int *)(reading ? data->dest : data->src); -+ -+ /* Always read / write data through the CPU */ -+ setbits_le32(&mmchost->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB); -+ -+ for (i = 0; i < (byte_cnt >> 2); i++) { -+ while (readl(&mmchost->reg->status) & status_bit) { -+ if (!timeout_msecs--) -+ return -1; -+ udelay(1000); -+ } -+ -+ if (reading) -+ buff[i] = readl(mmchost->database); -+ else -+ writel(buff[i], mmchost->database); -+ } -+ -+ return 0; -+} -+ -+static int mmc_rint_wait(struct mmc *mmc, unsigned int timeout_msecs, -+ unsigned int done_bit, const char *what) -+{ -+ struct sunxi_mmc_host *mmchost = mmc->priv; -+ unsigned int status; -+ -+ do { -+ status = readl(&mmchost->reg->rint); -+ if (!timeout_msecs-- || -+ (status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT)) { -+ debug("%s timeout %x\n", what, -+ status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT); -+ return TIMEOUT; -+ } -+ udelay(1000); -+ } while (!(status & done_bit)); -+ -+ return 0; -+} -+ -+static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, -+ struct mmc_data *data) -+{ -+ struct sunxi_mmc_host *mmchost = mmc->priv; -+ unsigned int cmdval = SUNXI_MMC_CMD_START; -+ unsigned int timeout_msecs; -+ int error = 0; -+ unsigned int status = 0; -+ unsigned int bytecnt = 0; -+ -+ if (mmchost->fatal_err) -+ return -1; -+ if (cmd->resp_type & MMC_RSP_BUSY) -+ debug("mmc cmd %d check rsp busy\n", cmd->cmdidx); -+ if (cmd->cmdidx == 12) -+ return 0; -+ -+ if (!cmd->cmdidx) -+ cmdval |= SUNXI_MMC_CMD_SEND_INIT_SEQ; -+ if (cmd->resp_type & MMC_RSP_PRESENT) -+ cmdval |= SUNXI_MMC_CMD_RESP_EXPIRE; -+ if (cmd->resp_type & MMC_RSP_136) -+ cmdval |= SUNXI_MMC_CMD_LONG_RESPONSE; -+ if (cmd->resp_type & MMC_RSP_CRC) -+ cmdval |= SUNXI_MMC_CMD_CHK_RESPONSE_CRC; -+ -+ if (data) { -+ if ((u32) data->dest & 0x3) { -+ error = -1; -+ goto out; -+ } -+ -+ cmdval |= SUNXI_MMC_CMD_DATA_EXPIRE|SUNXI_MMC_CMD_WAIT_PRE_OVER; -+ if (data->flags & MMC_DATA_WRITE) -+ cmdval |= SUNXI_MMC_CMD_WRITE; -+ if (data->blocks > 1) -+ cmdval |= SUNXI_MMC_CMD_AUTO_STOP; -+ writel(data->blocksize, &mmchost->reg->blksz); -+ writel(data->blocks * data->blocksize, &mmchost->reg->bytecnt); -+ } -+ -+ debug("mmc %d, cmd %d(0x%08x), arg 0x%08x\n", mmchost->mmc_no, -+ cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg); -+ writel(cmd->cmdarg, &mmchost->reg->arg); -+ -+ if (!data) -+ writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd); -+ -+ /* -+ * transfer data and check status -+ * STATREG[2] : FIFO empty -+ * STATREG[3] : FIFO full -+ */ -+ if (data) { -+ int ret = 0; -+ -+ bytecnt = data->blocksize * data->blocks; -+ debug("trans data %d bytes\n", bytecnt); -+ writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd); -+ ret = mmc_trans_data_by_cpu(mmc, data); -+ if (ret) { -+ error = readl(&mmchost->reg->rint) & \ -+ SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT; -+ error = TIMEOUT; -+ goto out; -+ } -+ } -+ -+ error = mmc_rint_wait(mmc, 0xfffff, SUNXI_MMC_RINT_COMMAND_DONE, "cmd"); -+ if (error) -+ goto out; -+ -+ if (data) { -+ timeout_msecs = 120; -+ debug("cacl timeout %x msec\n", timeout_msecs); -+ error = mmc_rint_wait(mmc, timeout_msecs, -+ data->blocks > 1 ? -+ SUNXI_MMC_RINT_AUTO_COMMAND_DONE : -+ SUNXI_MMC_RINT_DATA_OVER, -+ "data"); -+ if (error) -+ goto out; -+ } -+ -+ if (cmd->resp_type & MMC_RSP_BUSY) { -+ timeout_msecs = 2000; -+ do { -+ status = readl(&mmchost->reg->status); -+ if (!timeout_msecs--) { -+ debug("busy timeout\n"); -+ error = TIMEOUT; -+ goto out; -+ } -+ udelay(1000); -+ } while (status & SUNXI_MMC_STATUS_CARD_DATA_BUSY); -+ } -+ -+ if (cmd->resp_type & MMC_RSP_136) { -+ cmd->response[0] = readl(&mmchost->reg->resp3); -+ cmd->response[1] = readl(&mmchost->reg->resp2); -+ cmd->response[2] = readl(&mmchost->reg->resp1); -+ cmd->response[3] = readl(&mmchost->reg->resp0); -+ debug("mmc resp 0x%08x 0x%08x 0x%08x 0x%08x\n", -+ cmd->response[3], cmd->response[2], -+ cmd->response[1], cmd->response[0]); -+ } else { -+ cmd->response[0] = readl(&mmchost->reg->resp0); -+ debug("mmc resp 0x%08x\n", cmd->response[0]); -+ } -+out: -+ if (error < 0) { -+ writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl); -+ mmc_update_clk(mmc); -+ } -+ writel(0xffffffff, &mmchost->reg->rint); -+ writel(readl(&mmchost->reg->gctrl) | SUNXI_MMC_GCTRL_FIFO_RESET, -+ &mmchost->reg->gctrl); -+ -+ return error; -+} -+ -+static const struct mmc_ops sunxi_mmc_ops = { -+ .send_cmd = mmc_send_cmd, -+ .set_ios = mmc_set_ios, -+ .init = mmc_core_init, -+}; -+ -+int sunxi_mmc_init(int sdc_no) -+{ -+ struct mmc_config *cfg = &mmc_host[sdc_no].cfg; -+ -+ memset(&mmc_host[sdc_no], 0, sizeof(struct sunxi_mmc_host)); -+ -+ cfg->name = "SUNXI SD/MMC"; -+ cfg->ops = &sunxi_mmc_ops; -+ -+ cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; -+ cfg->host_caps = MMC_MODE_4BIT; -+ cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; -+ cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; -+ -+ cfg->f_min = 400000; -+ cfg->f_max = 52000000; -+ -+ mmc_resource_init(sdc_no); -+ mmc_clk_io_on(sdc_no); -+ -+ if (mmc_create(cfg, &mmc_host[sdc_no]) == NULL) -+ return -1; -+ -+ return 0; -+} -diff -ruN u-boot-2014.04/drivers/net/designware.c u-boot-sunxi/drivers/net/designware.c ---- u-boot-2014.04/drivers/net/designware.c 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/drivers/net/designware.c 2014-09-06 16:58:36.301953111 +0200 -@@ -249,7 +249,7 @@ - rx_descs_init(dev); - tx_descs_init(dev); - -- writel(FIXEDBURST | PRIORXTX_41 | BURST_16, &dma_p->busmode); -+ writel(FIXEDBURST | PRIORXTX_41 | DMA_PBL, &dma_p->busmode); - - writel(readl(&dma_p->opmode) | FLUSHTXFIFO | STOREFORWARD, - &dma_p->opmode); -@@ -280,10 +280,18 @@ - u32 desc_num = priv->tx_currdescnum; - struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num]; - -- /* Invalidate only "status" field for the following check */ -- invalidate_dcache_range((unsigned long)&desc_p->txrx_status, -- (unsigned long)&desc_p->txrx_status + -- sizeof(desc_p->txrx_status)); -+ /* -+ * Strictly we only need to invalidate the "txrx_status" field -+ * for the following check, but on some platforms we cannot -+ * invalidate only 4 bytes, so roundup to -+ * ARCH_DMA_MINALIGN. This is safe because the individual -+ * descriptors in the array are each aligned to -+ * ARCH_DMA_MINALIGN. -+ */ -+ invalidate_dcache_range( -+ (unsigned long)desc_p, -+ (unsigned long)desc_p + -+ roundup(sizeof(desc_p->txrx_status), ARCH_DMA_MINALIGN)); - - /* Check if the descriptor is owned by CPU */ - if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) { -@@ -351,7 +359,7 @@ - /* Invalidate received data */ - invalidate_dcache_range((unsigned long)desc_p->dmamac_addr, - (unsigned long)desc_p->dmamac_addr + -- length); -+ roundup(length, ARCH_DMA_MINALIGN)); - - NetReceive(desc_p->dmamac_addr, length); - -@@ -390,6 +398,8 @@ - if (!phydev) - return -1; - -+ phy_connect_dev(phydev, dev); -+ - phydev->supported &= PHY_GBIT_FEATURES; - phydev->advertising = phydev->supported; - -@@ -412,7 +422,8 @@ - * Since the priv structure contains the descriptors which need a strict - * buswidth alignment, memalign is used to allocate memory - */ -- priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev)); -+ priv = (struct dw_eth_dev *) memalign(ARCH_DMA_MINALIGN, -+ sizeof(struct dw_eth_dev)); - if (!priv) { - free(dev); - return -ENOMEM; -diff -ruN u-boot-2014.04/drivers/net/designware.h u-boot-sunxi/drivers/net/designware.h ---- u-boot-2014.04/drivers/net/designware.h 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/drivers/net/designware.h 2014-09-06 16:58:36.301953111 +0200 -@@ -77,18 +77,18 @@ - - #define DW_DMA_BASE_OFFSET (0x1000) - -+/* Default DMA Burst length */ -+#ifndef CONFIG_DW_GMAC_DEFAULT_DMA_PBL -+#define CONFIG_DW_GMAC_DEFAULT_DMA_PBL 8 -+#endif -+ - /* Bus mode register definitions */ - #define FIXEDBURST (1 << 16) - #define PRIORXTX_41 (3 << 14) - #define PRIORXTX_31 (2 << 14) - #define PRIORXTX_21 (1 << 14) - #define PRIORXTX_11 (0 << 14) --#define BURST_1 (1 << 8) --#define BURST_2 (2 << 8) --#define BURST_4 (4 << 8) --#define BURST_8 (8 << 8) --#define BURST_16 (16 << 8) --#define BURST_32 (32 << 8) -+#define DMA_PBL (CONFIG_DW_GMAC_DEFAULT_DMA_PBL<<8) - #define RXHIGHPRIO (1 << 1) - #define DMAMAC_SRST (1 << 0) - -@@ -215,15 +215,14 @@ - #endif - - struct dw_eth_dev { -- u32 interface; -- u32 tx_currdescnum; -- u32 rx_currdescnum; -- - struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM]; - struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM]; -+ char txbuffs[TX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN); -+ char rxbuffs[RX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN); - -- char txbuffs[TX_TOTAL_BUFSIZE]; -- char rxbuffs[RX_TOTAL_BUFSIZE]; -+ u32 interface; -+ u32 tx_currdescnum; -+ u32 rx_currdescnum; - - struct eth_mac_regs *mac_regs_p; - struct eth_dma_regs *dma_regs_p; -diff -ruN u-boot-2014.04/drivers/net/Makefile u-boot-sunxi/drivers/net/Makefile ---- u-boot-2014.04/drivers/net/Makefile 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/drivers/net/Makefile 2014-09-06 16:58:36.297953112 +0200 -@@ -50,7 +50,7 @@ - obj-$(CONFIG_SH_ETHER) += sh_eth.o - obj-$(CONFIG_SMC91111) += smc91111.o - obj-$(CONFIG_SMC911X) += smc911x.o --obj-$(CONFIG_SUNXI_WEMAC) += sunxi_wemac.o -+obj-$(CONFIG_SUNXI_EMAC) += sunxi_emac.o - obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o - obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o - obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o -diff -ruN u-boot-2014.04/drivers/net/sunxi_emac.c u-boot-sunxi/drivers/net/sunxi_emac.c ---- u-boot-2014.04/drivers/net/sunxi_emac.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/drivers/net/sunxi_emac.c 2014-09-06 16:58:36.317953111 +0200 -@@ -0,0 +1,521 @@ -+/* -+ * sunxi_emac.c -- Allwinner A10 ethernet driver -+ * -+ * (C) Copyright 2012, Stefan Roese -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* EMAC register */ -+struct emac_regs { -+ u32 ctl; /* 0x00 */ -+ u32 tx_mode; /* 0x04 */ -+ u32 tx_flow; /* 0x08 */ -+ u32 tx_ctl0; /* 0x0c */ -+ u32 tx_ctl1; /* 0x10 */ -+ u32 tx_ins; /* 0x14 */ -+ u32 tx_pl0; /* 0x18 */ -+ u32 tx_pl1; /* 0x1c */ -+ u32 tx_sta; /* 0x20 */ -+ u32 tx_io_data; /* 0x24 */ -+ u32 tx_io_data1;/* 0x28 */ -+ u32 tx_tsvl0; /* 0x2c */ -+ u32 tx_tsvh0; /* 0x30 */ -+ u32 tx_tsvl1; /* 0x34 */ -+ u32 tx_tsvh1; /* 0x38 */ -+ u32 rx_ctl; /* 0x3c */ -+ u32 rx_hash0; /* 0x40 */ -+ u32 rx_hash1; /* 0x44 */ -+ u32 rx_sta; /* 0x48 */ -+ u32 rx_io_data; /* 0x4c */ -+ u32 rx_fbc; /* 0x50 */ -+ u32 int_ctl; /* 0x54 */ -+ u32 int_sta; /* 0x58 */ -+ u32 mac_ctl0; /* 0x5c */ -+ u32 mac_ctl1; /* 0x60 */ -+ u32 mac_ipgt; /* 0x64 */ -+ u32 mac_ipgr; /* 0x68 */ -+ u32 mac_clrt; /* 0x6c */ -+ u32 mac_maxf; /* 0x70 */ -+ u32 mac_supp; /* 0x74 */ -+ u32 mac_test; /* 0x78 */ -+ u32 mac_mcfg; /* 0x7c */ -+ u32 mac_mcmd; /* 0x80 */ -+ u32 mac_madr; /* 0x84 */ -+ u32 mac_mwtd; /* 0x88 */ -+ u32 mac_mrdd; /* 0x8c */ -+ u32 mac_mind; /* 0x90 */ -+ u32 mac_ssrr; /* 0x94 */ -+ u32 mac_a0; /* 0x98 */ -+ u32 mac_a1; /* 0x9c */ -+}; -+ -+/* SRAMC register */ -+struct sunxi_sramc_regs { -+ u32 ctrl0; -+ u32 ctrl1; -+}; -+ -+/* 0: Disable 1: Aborted frame enable(default) */ -+#define EMAC_TX_AB_M (0x1 << 0) -+/* 0: CPU 1: DMA(default) */ -+#define EMAC_TX_TM (0x1 << 1) -+ -+#define EMAC_TX_SETUP (0) -+ -+/* 0: DRQ asserted 1: DRQ automatically(default) */ -+#define EMAC_RX_DRQ_MODE (0x1 << 1) -+/* 0: CPU 1: DMA(default) */ -+#define EMAC_RX_TM (0x1 << 2) -+/* 0: Normal(default) 1: Pass all Frames */ -+#define EMAC_RX_PA (0x1 << 4) -+/* 0: Normal(default) 1: Pass Control Frames */ -+#define EMAC_RX_PCF (0x1 << 5) -+/* 0: Normal(default) 1: Pass Frames with CRC Error */ -+#define EMAC_RX_PCRCE (0x1 << 6) -+/* 0: Normal(default) 1: Pass Frames with Length Error */ -+#define EMAC_RX_PLE (0x1 << 7) -+/* 0: Normal 1: Pass Frames length out of range(default) */ -+#define EMAC_RX_POR (0x1 << 8) -+/* 0: Not accept 1: Accept unicast Packets(default) */ -+#define EMAC_RX_UCAD (0x1 << 16) -+/* 0: Normal(default) 1: DA Filtering */ -+#define EMAC_RX_DAF (0x1 << 17) -+/* 0: Not accept 1: Accept multicast Packets(default) */ -+#define EMAC_RX_MCO (0x1 << 20) -+/* 0: Disable(default) 1: Enable Hash filter */ -+#define EMAC_RX_MHF (0x1 << 21) -+/* 0: Not accept 1: Accept Broadcast Packets(default) */ -+#define EMAC_RX_BCO (0x1 << 22) -+/* 0: Disable(default) 1: Enable SA Filtering */ -+#define EMAC_RX_SAF (0x1 << 24) -+/* 0: Normal(default) 1: Inverse Filtering */ -+#define EMAC_RX_SAIF (0x1 << 25) -+ -+#define EMAC_RX_SETUP (EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \ -+ EMAC_RX_MCO | EMAC_RX_BCO) -+ -+/* 0: Disable 1: Enable Receive Flow Control(default) */ -+#define EMAC_MAC_CTL0_RFC (0x1 << 2) -+/* 0: Disable 1: Enable Transmit Flow Control(default) */ -+#define EMAC_MAC_CTL0_TFC (0x1 << 3) -+ -+#define EMAC_MAC_CTL0_SETUP (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC) -+ -+/* 0: Disable 1: Enable MAC Frame Length Checking(default) */ -+#define EMAC_MAC_CTL1_FLC (0x1 << 1) -+/* 0: Disable(default) 1: Enable Huge Frame */ -+#define EMAC_MAC_CTL1_HF (0x1 << 2) -+/* 0: Disable(default) 1: Enable MAC Delayed CRC */ -+#define EMAC_MAC_CTL1_DCRC (0x1 << 3) -+/* 0: Disable 1: Enable MAC CRC(default) */ -+#define EMAC_MAC_CTL1_CRC (0x1 << 4) -+/* 0: Disable 1: Enable MAC PAD Short frames(default) */ -+#define EMAC_MAC_CTL1_PC (0x1 << 5) -+/* 0: Disable(default) 1: Enable MAC PAD Short frames and append CRC */ -+#define EMAC_MAC_CTL1_VC (0x1 << 6) -+/* 0: Disable(default) 1: Enable MAC auto detect Short frames */ -+#define EMAC_MAC_CTL1_ADP (0x1 << 7) -+/* 0: Disable(default) 1: Enable */ -+#define EMAC_MAC_CTL1_PRE (0x1 << 8) -+/* 0: Disable(default) 1: Enable */ -+#define EMAC_MAC_CTL1_LPE (0x1 << 9) -+/* 0: Disable(default) 1: Enable no back off */ -+#define EMAC_MAC_CTL1_NB (0x1 << 12) -+/* 0: Disable(default) 1: Enable */ -+#define EMAC_MAC_CTL1_BNB (0x1 << 13) -+/* 0: Disable(default) 1: Enable */ -+#define EMAC_MAC_CTL1_ED (0x1 << 14) -+ -+#define EMAC_MAC_CTL1_SETUP (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \ -+ EMAC_MAC_CTL1_PC) -+ -+#define EMAC_MAC_IPGT 0x15 -+ -+#define EMAC_MAC_NBTB_IPG1 0xc -+#define EMAC_MAC_NBTB_IPG2 0x12 -+ -+#define EMAC_MAC_CW 0x37 -+#define EMAC_MAC_RM 0xf -+ -+#define EMAC_MAC_MFL 0x0600 -+ -+/* Receive status */ -+#define EMAC_CRCERR (0x1 << 4) -+#define EMAC_LENERR (0x3 << 5) -+ -+#define DMA_CPU_TRRESHOLD 2000 -+ -+struct emac_eth_dev { -+ u32 speed; -+ u32 duplex; -+ u32 phy_configured; -+ int link_printed; -+}; -+ -+struct emac_rxhdr { -+ s16 rx_len; -+ u16 rx_status; -+}; -+ -+static void emac_inblk_32bit(void *reg, void *data, int count) -+{ -+ int cnt = (count + 3) >> 2; -+ -+ if (cnt) { -+ u32 *buf = data; -+ -+ do { -+ u32 x = readl(reg); -+ *buf++ = x; -+ } while (--cnt); -+ } -+} -+ -+static void emac_outblk_32bit(void *reg, void *data, int count) -+{ -+ int cnt = (count + 3) >> 2; -+ -+ if (cnt) { -+ const u32 *buf = data; -+ -+ do { -+ writel(*buf++, reg); -+ } while (--cnt); -+ } -+} -+ -+/* Read a word from phyxcer */ -+static int emac_phy_read(const char *devname, unsigned char addr, -+ unsigned char reg, unsigned short *value) -+{ -+ struct eth_device *dev = eth_get_dev_by_name(devname); -+ struct emac_regs *regs = (struct emac_regs *)dev->iobase; -+ -+ /* issue the phy address and reg */ -+ writel(addr << 8 | reg, ®s->mac_madr); -+ -+ /* pull up the phy io line */ -+ writel(0x1, ®s->mac_mcmd); -+ -+ /* Wait read complete */ -+ mdelay(1); -+ -+ /* push down the phy io line */ -+ writel(0x0, ®s->mac_mcmd); -+ -+ /* and write data */ -+ *value = readl(®s->mac_mrdd); -+ -+ return 0; -+} -+ -+/* Write a word to phyxcer */ -+static int emac_phy_write(const char *devname, unsigned char addr, -+ unsigned char reg, unsigned short value) -+{ -+ struct eth_device *dev = eth_get_dev_by_name(devname); -+ struct emac_regs *regs = (struct emac_regs *)dev->iobase; -+ -+ /* issue the phy address and reg */ -+ writel(addr << 8 | reg, ®s->mac_madr); -+ -+ /* pull up the phy io line */ -+ writel(0x1, ®s->mac_mcmd); -+ -+ /* Wait write complete */ -+ mdelay(1); -+ -+ /* push down the phy io line */ -+ writel(0x0, ®s->mac_mcmd); -+ -+ /* and write data */ -+ writel(value, ®s->mac_mwtd); -+ -+ return 0; -+} -+ -+static void emac_setup(struct eth_device *dev) -+{ -+ struct emac_regs *regs = (struct emac_regs *)dev->iobase; -+ u32 reg_val; -+ u16 phy_val; -+ u32 duplex_flag; -+ -+ /* Set up TX */ -+ writel(EMAC_TX_SETUP, ®s->tx_mode); -+ -+ /* Set up RX */ -+ writel(EMAC_RX_SETUP, ®s->rx_ctl); -+ -+ /* Set MAC */ -+ /* Set MAC CTL0 */ -+ writel(EMAC_MAC_CTL0_SETUP, ®s->mac_ctl0); -+ -+ /* Set MAC CTL1 */ -+ emac_phy_read(dev->name, 1, 0, &phy_val); -+ debug("PHY SETUP, reg 0 value: %x\n", phy_val); -+ duplex_flag = !!(phy_val & (1 << 8)); -+ -+ reg_val = 0; -+ if (duplex_flag) -+ reg_val = (0x1 << 0); -+ writel(EMAC_MAC_CTL1_SETUP | reg_val, ®s->mac_ctl1); -+ -+ /* Set up IPGT */ -+ writel(EMAC_MAC_IPGT, ®s->mac_ipgt); -+ -+ /* Set up IPGR */ -+ writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), ®s->mac_ipgr); -+ -+ /* Set up Collison window */ -+ writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), ®s->mac_clrt); -+ -+ /* Set up Max Frame Length */ -+ writel(EMAC_MAC_MFL, ®s->mac_maxf); -+} -+ -+static void emac_reset(struct eth_device *dev) -+{ -+ struct emac_regs *regs = (struct emac_regs *)dev->iobase; -+ -+ debug("resetting device\n"); -+ -+ /* RESET device */ -+ writel(0, ®s->ctl); -+ udelay(200); -+ -+ writel(1, ®s->ctl); -+ udelay(200); -+} -+ -+static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd) -+{ -+ struct emac_regs *regs = (struct emac_regs *)dev->iobase; -+ struct emac_eth_dev *priv = dev->priv; -+ u16 phy_reg; -+ -+ /* Init EMAC */ -+ -+ /* Flush RX FIFO */ -+ setbits_le32(®s->rx_ctl, 0x8); -+ udelay(1); -+ -+ /* Init MAC */ -+ -+ /* Soft reset MAC */ -+ clrbits_le32(®s->mac_ctl0, 0x1 << 15); -+ -+ /* Clear RX counter */ -+ writel(0x0, ®s->rx_fbc); -+ udelay(1); -+ -+ /* Set up EMAC */ -+ emac_setup(dev); -+ -+ writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 | -+ dev->enetaddr[2], ®s->mac_a1); -+ writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 | -+ dev->enetaddr[5], ®s->mac_a0); -+ -+ mdelay(1); -+ -+ emac_reset(dev); -+ -+ /* PHY POWER UP */ -+ emac_phy_read(dev->name, 1, 0, &phy_reg); -+ emac_phy_write(dev->name, 1, 0, phy_reg & (~(0x1 << 11))); -+ mdelay(1); -+ -+ emac_phy_read(dev->name, 1, 0, &phy_reg); -+ -+ priv->speed = miiphy_speed(dev->name, 0); -+ priv->duplex = miiphy_duplex(dev->name, 0); -+ -+ /* Print link status only once */ -+ if (!priv->link_printed) { -+ printf("ENET Speed is %d Mbps - %s duplex connection\n", -+ priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL"); -+ priv->link_printed = 1; -+ } -+ -+ /* Set EMAC SPEED depend on PHY */ -+ clrsetbits_le32(®s->mac_supp, 1 << 8, -+ ((phy_reg & (0x1 << 13)) >> 13) << 8); -+ -+ /* Set duplex depend on phy */ -+ clrsetbits_le32(®s->mac_ctl1, 1 << 0, -+ ((phy_reg & (0x1 << 8)) >> 8) << 0); -+ -+ /* Enable RX/TX */ -+ setbits_le32(®s->ctl, 0x7); -+ -+ return 0; -+} -+ -+static void sunxi_emac_eth_halt(struct eth_device *dev) -+{ -+ /* Nothing to do here */ -+} -+ -+static int sunxi_emac_eth_recv(struct eth_device *dev) -+{ -+ struct emac_regs *regs = (struct emac_regs *)dev->iobase; -+ struct emac_rxhdr rxhdr; -+ u32 rxcount; -+ u32 reg_val; -+ int rx_len; -+ int rx_status; -+ int good_packet; -+ -+ /* Check packet ready or not */ -+ -+ /* Race warning: The first packet might arrive with -+ * the interrupts disabled, but the second will fix -+ */ -+ rxcount = readl(®s->rx_fbc); -+ if (!rxcount) { -+ /* Had one stuck? */ -+ rxcount = readl(®s->rx_fbc); -+ if (!rxcount) -+ return 0; -+ } -+ -+ reg_val = readl(®s->rx_io_data); -+ if (reg_val != 0x0143414d) { -+ /* Disable RX */ -+ clrbits_le32(®s->ctl, 0x1 << 2); -+ -+ /* Flush RX FIFO */ -+ setbits_le32(®s->rx_ctl, 0x1 << 3); -+ while (readl(®s->rx_ctl) & (0x1 << 3)) -+ ; -+ -+ /* Enable RX */ -+ setbits_le32(®s->ctl, 0x1 << 2); -+ -+ return 0; -+ } -+ -+ /* A packet ready now -+ * Get status/length -+ */ -+ good_packet = 1; -+ -+ emac_inblk_32bit(®s->rx_io_data, &rxhdr, sizeof(rxhdr)); -+ -+ rx_len = rxhdr.rx_len; -+ rx_status = rxhdr.rx_status; -+ -+ /* Packet Status check */ -+ if (rx_len < 0x40) { -+ good_packet = 0; -+ debug("RX: Bad Packet (runt)\n"); -+ } -+ -+ /* rx_status is identical to RSR register. */ -+ if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) { -+ good_packet = 0; -+ if (rx_status & EMAC_CRCERR) -+ printf("crc error\n"); -+ if (rx_status & EMAC_LENERR) -+ printf("length error\n"); -+ } -+ -+ /* Move data from EMAC */ -+ if (good_packet) { -+ if (rx_len > DMA_CPU_TRRESHOLD) { -+ printf("Received packet is too big (len=%d)\n", rx_len); -+ } else { -+ emac_inblk_32bit((void *)®s->rx_io_data, -+ NetRxPackets[0], rx_len); -+ -+ /* Pass to upper layer */ -+ NetReceive(NetRxPackets[0], rx_len); -+ return rx_len; -+ } -+ } -+ -+ return 0; -+} -+ -+static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len) -+{ -+ struct emac_regs *regs = (struct emac_regs *)dev->iobase; -+ -+ /* Select channel 0 */ -+ writel(0, ®s->tx_ins); -+ -+ /* Write packet */ -+ emac_outblk_32bit((void *)®s->tx_io_data, packet, len); -+ -+ /* Set TX len */ -+ writel(len, ®s->tx_pl0); -+ -+ /* Start translate from fifo to phy */ -+ setbits_le32(®s->tx_ctl0, 1); -+ -+ return 0; -+} -+ -+int sunxi_emac_initialize(void) -+{ -+ struct sunxi_ccm_reg *const ccm = -+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ struct sunxi_sramc_regs *sram = -+ (struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE; -+ struct emac_regs *regs = -+ (struct emac_regs *)SUNXI_EMAC_BASE; -+ struct eth_device *dev; -+ struct emac_eth_dev *priv; -+ int pin; -+ -+ dev = malloc(sizeof(*dev)); -+ if (dev == NULL) -+ return -ENOMEM; -+ -+ priv = (struct emac_eth_dev *)malloc(sizeof(struct emac_eth_dev)); -+ if (!priv) { -+ free(dev); -+ return -ENOMEM; -+ } -+ -+ memset(dev, 0, sizeof(*dev)); -+ memset(priv, 0, sizeof(struct emac_eth_dev)); -+ -+ /* Map SRAM to EMAC */ -+ setbits_le32(&sram->ctrl1, 0x5 << 2); -+ -+ /* Configure pin mux settings for MII Ethernet */ -+ for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++) -+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPA0_EMAC); -+ -+ /* Set up clock gating */ -+ setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC); -+ -+ /* Set MII clock */ -+ clrsetbits_le32(®s->mac_mcfg, 0xf << 2, 0xd << 2); -+ -+ dev->iobase = (int)regs; -+ dev->priv = priv; -+ dev->init = sunxi_emac_eth_init; -+ dev->halt = sunxi_emac_eth_halt; -+ dev->send = sunxi_emac_eth_send; -+ dev->recv = sunxi_emac_eth_recv; -+ strcpy(dev->name, "emac"); -+ -+ eth_register(dev); -+ -+ miiphy_register(dev->name, emac_phy_read, emac_phy_write); -+ -+ return 0; -+} -diff -ruN u-boot-2014.04/drivers/net/sunxi_wemac.c u-boot-sunxi/drivers/net/sunxi_wemac.c ---- u-boot-2014.04/drivers/net/sunxi_wemac.c 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/drivers/net/sunxi_wemac.c 1970-01-01 01:00:00.000000000 +0100 -@@ -1,525 +0,0 @@ --/* -- * sunxi_wemac.c -- Allwinner A10 ethernet driver -- * -- * (C) Copyright 2012, Stefan Roese -- * -- * SPDX-License-Identifier: GPL-2.0+ -- */ -- --#include --#include --#include --#include --#include --#include --#include --#include -- --/* EMAC register */ --struct wemac_regs { -- u32 ctl; /* 0x00 */ -- u32 tx_mode; /* 0x04 */ -- u32 tx_flow; /* 0x08 */ -- u32 tx_ctl0; /* 0x0c */ -- u32 tx_ctl1; /* 0x10 */ -- u32 tx_ins; /* 0x14 */ -- u32 tx_pl0; /* 0x18 */ -- u32 tx_pl1; /* 0x1c */ -- u32 tx_sta; /* 0x20 */ -- u32 tx_io_data; /* 0x24 */ -- u32 tx_io_data1; /* 0x28 */ -- u32 tx_tsvl0; /* 0x2c */ -- u32 tx_tsvh0; /* 0x30 */ -- u32 tx_tsvl1; /* 0x34 */ -- u32 tx_tsvh1; /* 0x38 */ -- u32 rx_ctl; /* 0x3c */ -- u32 rx_hash0; /* 0x40 */ -- u32 rx_hash1; /* 0x44 */ -- u32 rx_sta; /* 0x48 */ -- u32 rx_io_data; /* 0x4c */ -- u32 rx_fbc; /* 0x50 */ -- u32 int_ctl; /* 0x54 */ -- u32 int_sta; /* 0x58 */ -- u32 mac_ctl0; /* 0x5c */ -- u32 mac_ctl1; /* 0x60 */ -- u32 mac_ipgt; /* 0x64 */ -- u32 mac_ipgr; /* 0x68 */ -- u32 mac_clrt; /* 0x6c */ -- u32 mac_maxf; /* 0x70 */ -- u32 mac_supp; /* 0x74 */ -- u32 mac_test; /* 0x78 */ -- u32 mac_mcfg; /* 0x7c */ -- u32 mac_mcmd; /* 0x80 */ -- u32 mac_madr; /* 0x84 */ -- u32 mac_mwtd; /* 0x88 */ -- u32 mac_mrdd; /* 0x8c */ -- u32 mac_mind; /* 0x90 */ -- u32 mac_ssrr; /* 0x94 */ -- u32 mac_a0; /* 0x98 */ -- u32 mac_a1; /* 0x9c */ --}; -- --/* SRAMC register */ --struct sunxi_sramc_regs { -- u32 ctrl0; -- u32 ctrl1; --}; -- --/* 0: Disable 1: Aborted frame enable(default) */ --#define EMAC_TX_AB_M (0x1 << 0) --/* 0: CPU 1: DMA(default) */ --#define EMAC_TX_TM (0x1 << 1) -- --#define EMAC_TX_SETUP (0) -- --/* 0: DRQ asserted 1: DRQ automatically(default) */ --#define EMAC_RX_DRQ_MODE (0x1 << 1) --/* 0: CPU 1: DMA(default) */ --#define EMAC_RX_TM (0x1 << 2) --/* 0: Normal(default) 1: Pass all Frames */ --#define EMAC_RX_PA (0x1 << 4) --/* 0: Normal(default) 1: Pass Control Frames */ --#define EMAC_RX_PCF (0x1 << 5) --/* 0: Normal(default) 1: Pass Frames with CRC Error */ --#define EMAC_RX_PCRCE (0x1 << 6) --/* 0: Normal(default) 1: Pass Frames with Length Error */ --#define EMAC_RX_PLE (0x1 << 7) --/* 0: Normal 1: Pass Frames length out of range(default) */ --#define EMAC_RX_POR (0x1 << 8) --/* 0: Not accept 1: Accept unicast Packets(default) */ --#define EMAC_RX_UCAD (0x1 << 16) --/* 0: Normal(default) 1: DA Filtering */ --#define EMAC_RX_DAF (0x1 << 17) --/* 0: Not accept 1: Accept multicast Packets(default) */ --#define EMAC_RX_MCO (0x1 << 20) --/* 0: Disable(default) 1: Enable Hash filter */ --#define EMAC_RX_MHF (0x1 << 21) --/* 0: Not accept 1: Accept Broadcast Packets(default) */ --#define EMAC_RX_BCO (0x1 << 22) --/* 0: Disable(default) 1: Enable SA Filtering */ --#define EMAC_RX_SAF (0x1 << 24) --/* 0: Normal(default) 1: Inverse Filtering */ --#define EMAC_RX_SAIF (0x1 << 25) -- --#define EMAC_RX_SETUP (EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \ -- EMAC_RX_MCO | EMAC_RX_BCO) -- --/* 0: Disable 1: Enable Receive Flow Control(default) */ --#define EMAC_MAC_CTL0_RFC (0x1 << 2) --/* 0: Disable 1: Enable Transmit Flow Control(default) */ --#define EMAC_MAC_CTL0_TFC (0x1 << 3) -- --#define EMAC_MAC_CTL0_SETUP (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC) -- --/* 0: Disable 1: Enable MAC Frame Length Checking(default) */ --#define EMAC_MAC_CTL1_FLC (0x1 << 1) --/* 0: Disable(default) 1: Enable Huge Frame */ --#define EMAC_MAC_CTL1_HF (0x1 << 2) --/* 0: Disable(default) 1: Enable MAC Delayed CRC */ --#define EMAC_MAC_CTL1_DCRC (0x1 << 3) --/* 0: Disable 1: Enable MAC CRC(default) */ --#define EMAC_MAC_CTL1_CRC (0x1 << 4) --/* 0: Disable 1: Enable MAC PAD Short frames(default) */ --#define EMAC_MAC_CTL1_PC (0x1 << 5) --/* 0: Disable(default) 1: Enable MAC PAD Short frames and append CRC */ --#define EMAC_MAC_CTL1_VC (0x1 << 6) --/* 0: Disable(default) 1: Enable MAC auto detect Short frames */ --#define EMAC_MAC_CTL1_ADP (0x1 << 7) --/* 0: Disable(default) 1: Enable */ --#define EMAC_MAC_CTL1_PRE (0x1 << 8) --/* 0: Disable(default) 1: Enable */ --#define EMAC_MAC_CTL1_LPE (0x1 << 9) --/* 0: Disable(default) 1: Enable no back off */ --#define EMAC_MAC_CTL1_NB (0x1 << 12) --/* 0: Disable(default) 1: Enable */ --#define EMAC_MAC_CTL1_BNB (0x1 << 13) --/* 0: Disable(default) 1: Enable */ --#define EMAC_MAC_CTL1_ED (0x1 << 14) -- --#define EMAC_MAC_CTL1_SETUP (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \ -- EMAC_MAC_CTL1_PC) -- --#define EMAC_MAC_IPGT 0x15 -- --#define EMAC_MAC_NBTB_IPG1 0xC --#define EMAC_MAC_NBTB_IPG2 0x12 -- --#define EMAC_MAC_CW 0x37 --#define EMAC_MAC_RM 0xF -- --#define EMAC_MAC_MFL 0x0600 -- --/* Receive status */ --#define EMAC_CRCERR (1 << 4) --#define EMAC_LENERR (3 << 5) -- --#define DMA_CPU_TRRESHOLD 2000 -- --struct wemac_eth_dev { -- u32 speed; -- u32 duplex; -- u32 phy_configured; -- int link_printed; --}; -- --struct wemac_rxhdr { -- s16 rx_len; -- u16 rx_status; --}; -- --static void wemac_inblk_32bit(void *reg, void *data, int count) --{ -- int cnt = (count + 3) >> 2; -- -- if (cnt) { -- u32 *buf = data; -- -- do { -- u32 x = readl(reg); -- *buf++ = x; -- } while (--cnt); -- } --} -- --static void wemac_outblk_32bit(void *reg, void *data, int count) --{ -- int cnt = (count + 3) >> 2; -- -- if (cnt) { -- const u32 *buf = data; -- -- do { -- writel(*buf++, reg); -- } while (--cnt); -- } --} -- --/* -- * Read a word from phyxcer -- */ --static int wemac_phy_read(const char *devname, unsigned char addr, -- unsigned char reg, unsigned short *value) --{ -- struct eth_device *dev = eth_get_dev_by_name(devname); -- struct wemac_regs *regs = (struct wemac_regs *)dev->iobase; -- -- /* issue the phy address and reg */ -- writel(addr << 8 | reg, ®s->mac_madr); -- -- /* pull up the phy io line */ -- writel(0x1, ®s->mac_mcmd); -- -- /* Wait read complete */ -- mdelay(1); -- -- /* push down the phy io line */ -- writel(0x0, ®s->mac_mcmd); -- -- /* and write data */ -- *value = readl(®s->mac_mrdd); -- -- return 0; --} -- --/* -- * Write a word to phyxcer -- */ --static int wemac_phy_write(const char *devname, unsigned char addr, -- unsigned char reg, unsigned short value) --{ -- struct eth_device *dev = eth_get_dev_by_name(devname); -- struct wemac_regs *regs = (struct wemac_regs *)dev->iobase; -- -- /* issue the phy address and reg */ -- writel(addr << 8 | reg, ®s->mac_madr); -- -- /* pull up the phy io line */ -- writel(0x1, ®s->mac_mcmd); -- -- /* Wait write complete */ -- mdelay(1); -- -- /* push down the phy io line */ -- writel(0x0, ®s->mac_mcmd); -- -- /* and write data */ -- writel(value, ®s->mac_mwtd); -- -- return 0; --} -- --static void emac_setup(struct eth_device *dev) --{ -- struct wemac_regs *regs = (struct wemac_regs *)dev->iobase; -- u32 reg_val; -- u16 phy_val; -- u32 duplex_flag; -- -- /* Set up TX */ -- writel(EMAC_TX_SETUP, ®s->tx_mode); -- -- /* Set up RX */ -- writel(EMAC_RX_SETUP, ®s->rx_ctl); -- -- /* Set MAC */ -- /* Set MAC CTL0 */ -- writel(EMAC_MAC_CTL0_SETUP, ®s->mac_ctl0); -- -- /* Set MAC CTL1 */ -- wemac_phy_read(dev->name, 1, 0, &phy_val); -- debug("PHY SETUP, reg 0 value: %x\n", phy_val); -- duplex_flag = !!(phy_val & (1 << 8)); -- -- reg_val = 0; -- if (duplex_flag) -- reg_val = (0x1 << 0); -- writel(EMAC_MAC_CTL1_SETUP | reg_val, ®s->mac_ctl1); -- -- /* Set up IPGT */ -- writel(EMAC_MAC_IPGT, ®s->mac_ipgt); -- -- /* Set up IPGR */ -- writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), ®s->mac_ipgr); -- -- /* Set up Collison window */ -- writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), ®s->mac_clrt); -- -- /* Set up Max Frame Length */ -- writel(EMAC_MAC_MFL, ®s->mac_maxf); --} -- --static void wemac_reset(struct eth_device *dev) --{ -- struct wemac_regs *regs = (struct wemac_regs *)dev->iobase; -- -- debug("resetting device\n"); -- -- /* RESET device */ -- writel(0, ®s->ctl); -- udelay(200); -- -- writel(1, ®s->ctl); -- udelay(200); --} -- --static int sunxi_wemac_eth_init(struct eth_device *dev, bd_t *bd) --{ -- struct wemac_regs *regs = (struct wemac_regs *)dev->iobase; -- struct wemac_eth_dev *priv = dev->priv; -- u16 phy_reg; -- -- /* Init EMAC */ -- -- /* Flush RX FIFO */ -- setbits_le32(®s->rx_ctl, 0x8); -- udelay(1); -- -- /* Init MAC */ -- -- /* Soft reset MAC */ -- clrbits_le32(®s->mac_ctl0, 1 << 15); -- -- /* Set MII clock */ -- clrsetbits_le32(®s->mac_mcfg, 0xf << 2, 0xd << 2); -- -- /* Clear RX counter */ -- writel(0x0, ®s->rx_fbc); -- udelay(1); -- -- /* Set up EMAC */ -- emac_setup(dev); -- -- writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 | -- dev->enetaddr[2], ®s->mac_a1); -- writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 | -- dev->enetaddr[5], ®s->mac_a0); -- -- mdelay(1); -- -- wemac_reset(dev); -- -- /* PHY POWER UP */ -- wemac_phy_read(dev->name, 1, 0, &phy_reg); -- wemac_phy_write(dev->name, 1, 0, phy_reg & (~(1 << 11))); -- mdelay(1); -- -- wemac_phy_read(dev->name, 1, 0, &phy_reg); -- -- priv->speed = miiphy_speed(dev->name, 0); -- priv->duplex = miiphy_duplex(dev->name, 0); -- -- /* Print link status only once */ -- if (!priv->link_printed) { -- printf("ENET Speed is %d Mbps - %s duplex connection\n", -- priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL"); -- priv->link_printed = 1; -- } -- -- /* Set EMAC SPEED depend on PHY */ -- clrsetbits_le32(®s->mac_supp, 1 << 8, -- ((phy_reg & (1 << 13)) >> 13) << 8); -- -- /* Set duplex depend on phy */ -- clrsetbits_le32(®s->mac_ctl1, 1 << 0, -- ((phy_reg & (1 << 8)) >> 8) << 0); -- -- /* Enable RX/TX */ -- setbits_le32(®s->ctl, 0x7); -- -- return 0; --} -- --static void sunxi_wemac_eth_halt(struct eth_device *dev) --{ -- /* Nothing to do here */ --} -- --static int sunxi_wemac_eth_recv(struct eth_device *dev) --{ -- struct wemac_regs *regs = (struct wemac_regs *)dev->iobase; -- struct wemac_rxhdr rxhdr; -- u32 rxcount; -- u32 reg_val; -- int rx_len; -- int rx_status; -- int good_packet; -- -- /* Check packet ready or not */ -- -- /* -- * Race warning: The first packet might arrive with -- * the interrupts disabled, but the second will fix -- */ -- rxcount = readl(®s->rx_fbc); -- if (!rxcount) { -- /* Had one stuck? */ -- rxcount = readl(®s->rx_fbc); -- if (!rxcount) -- return 0; -- } -- -- reg_val = readl(®s->rx_io_data); -- if (reg_val != 0x0143414d) { -- /* Disable RX */ -- clrbits_le32(®s->ctl, 1 << 2); -- -- /* Flush RX FIFO */ -- setbits_le32(®s->rx_ctl, 1 << 3); -- while (readl(®s->rx_ctl) & (1 << 3)) -- ; -- -- /* Enable RX */ -- setbits_le32(®s->ctl, 1 << 2); -- -- return 0; -- } -- -- /* -- * A packet ready now -- * Get status/length -- */ -- good_packet = 1; -- -- wemac_inblk_32bit(®s->rx_io_data, &rxhdr, sizeof(rxhdr)); -- -- rx_len = rxhdr.rx_len; -- rx_status = rxhdr.rx_status; -- -- /* Packet Status check */ -- if (rx_len < 0x40) { -- good_packet = 0; -- debug("RX: Bad Packet (runt)\n"); -- } -- -- /* rx_status is identical to RSR register. */ -- if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) { -- good_packet = 0; -- if (rx_status & EMAC_CRCERR) -- printf("crc error\n"); -- if (rx_status & EMAC_LENERR) -- printf("length error\n"); -- } -- -- /* Move data from WEMAC */ -- if (good_packet) { -- if (rx_len > DMA_CPU_TRRESHOLD) { -- printf("Received packet is too big (len=%d)\n", rx_len); -- } else { -- wemac_inblk_32bit((void *)®s->rx_io_data, -- NetRxPackets[0], rx_len); -- -- /* Pass to upper layer */ -- NetReceive(NetRxPackets[0], rx_len); -- return rx_len; -- } -- } -- -- return 0; --} -- --static int sunxi_wemac_eth_send(struct eth_device *dev, void *packet, int len) --{ -- struct wemac_regs *regs = (struct wemac_regs *)dev->iobase; -- -- /* Select channel 0 */ -- writel(0, ®s->tx_ins); -- -- /* Write packet */ -- wemac_outblk_32bit((void *)®s->tx_io_data, packet, len); -- -- /* Set TX len */ -- writel(len, ®s->tx_pl0); -- -- /* Start translate from fifo to phy */ -- setbits_le32(®s->tx_ctl0, 1); -- -- return 0; --} -- --int sunxi_wemac_initialize(void) --{ -- struct sunxi_ccm_reg *const ccm = -- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -- struct sunxi_sramc_regs *sram = -- (struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE; -- struct eth_device *dev; -- struct wemac_eth_dev *priv; -- int pin; -- -- dev = malloc(sizeof(*dev)); -- if (dev == NULL) -- return -ENOMEM; -- -- priv = (struct wemac_eth_dev *)malloc(sizeof(struct wemac_eth_dev)); -- if (!priv) { -- free(dev); -- return -ENOMEM; -- } -- -- memset(dev, 0, sizeof(*dev)); -- memset(priv, 0, sizeof(struct wemac_eth_dev)); -- -- /* Map SRAM to EMAC */ -- setbits_le32(&sram->ctrl1, 0x5 << 2); -- -- /* Configure pin mux settings for MII Ethernet */ -- for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++) -- sunxi_gpio_set_cfgpin(pin, 2); -- -- /* Set up clock gating */ -- setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_EMAC); -- -- dev->iobase = SUNXI_EMAC_BASE; -- dev->priv = priv; -- dev->init = sunxi_wemac_eth_init; -- dev->halt = sunxi_wemac_eth_halt; -- dev->send = sunxi_wemac_eth_send; -- dev->recv = sunxi_wemac_eth_recv; -- strcpy(dev->name, "wemac"); -- -- eth_register(dev); -- -- miiphy_register(dev->name, wemac_phy_read, wemac_phy_write); -- -- return 0; --} -diff -ruN u-boot-2014.04/drivers/power/axp152.c u-boot-sunxi/drivers/power/axp152.c ---- u-boot-2014.04/drivers/power/axp152.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/drivers/power/axp152.c 2014-09-06 16:58:36.321953111 +0200 -@@ -0,0 +1,112 @@ -+/* -+ * (C) Copyright 2012 -+ * Henrik Nordstrom -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+#include -+#include -+#include -+ -+enum axp152_reg { -+ AXP152_CHIP_VERSION = 0x3, -+ AXP152_DCDC2_VOLTAGE = 0x23, -+ AXP152_DCDC3_VOLTAGE = 0x27, -+ AXP152_DCDC4_VOLTAGE = 0x2B, -+ AXP152_LDO2_VOLTAGE = 0x2A, -+ AXP152_SHUTDOWN = 0x32, -+}; -+ -+#define AXP152_POWEROFF (1 << 7) -+ -+static int axp152_write(enum axp152_reg reg, u8 val) -+{ -+ return i2c_write(0x30, reg, 1, &val, 1); -+} -+ -+static int axp152_read(enum axp152_reg reg, u8 *val) -+{ -+ return i2c_read(0x30, reg, 1, val, 1); -+} -+ -+static int axp152_mvolt_to_target(int mvolt, int min, int max, int div) -+{ -+ if (mvolt < min) -+ mvolt = min; -+ else if (mvolt > max) -+ mvolt = max; -+ -+ return (mvolt - min) / div; -+} -+ -+int axp152_set_dcdc2(int mvolt) -+{ -+ int rc, target; -+ u8 current; -+ -+ target = axp152_mvolt_to_target(mvolt, 700, 2275, 25); -+ -+ /* Do we really need to be this gentle? It has built-in voltage slope */ -+ while ((rc = axp152_read(AXP152_DCDC2_VOLTAGE, ¤t)) == 0 && -+ current != target) { -+ if (current < target) -+ current++; -+ else -+ current--; -+ rc = axp152_write(AXP152_DCDC2_VOLTAGE, current); -+ if (rc) -+ break; -+ } -+ return rc; -+} -+ -+int axp152_set_dcdc3(int mvolt) -+{ -+ int target = axp152_mvolt_to_target(mvolt, 700, 3500, 25); -+ -+ return axp152_write(AXP152_DCDC3_VOLTAGE, target); -+} -+ -+int axp152_set_dcdc4(int mvolt) -+{ -+ int target = axp152_mvolt_to_target(mvolt, 700, 3500, 25); -+ -+ return axp152_write(AXP152_DCDC4_VOLTAGE, target); -+} -+ -+int axp152_set_ldo2(int mvolt) -+{ -+ int target = axp152_mvolt_to_target(mvolt, 700, 3500, 100); -+ -+ return axp152_write(AXP152_LDO2_VOLTAGE, target); -+} -+ -+void axp152_poweroff(void) -+{ -+ u8 val; -+ -+ if (axp152_read(AXP152_SHUTDOWN, &val) != 0) -+ return; -+ -+ val |= AXP152_POWEROFF; -+ -+ if (axp152_write(AXP152_SHUTDOWN, val) != 0) -+ return; -+ -+ udelay(10000); /* wait for power to drain */ -+} -+ -+int axp152_init(void) -+{ -+ u8 ver; -+ int rc; -+ -+ rc = axp152_read(AXP152_CHIP_VERSION, &ver); -+ if (rc) -+ return rc; -+ -+ if (ver != 0x05) -+ return -1; -+ -+ return 0; -+} -diff -ruN u-boot-2014.04/drivers/power/axp209.c u-boot-sunxi/drivers/power/axp209.c ---- u-boot-2014.04/drivers/power/axp209.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/drivers/power/axp209.c 2014-09-06 16:58:36.321953111 +0200 -@@ -0,0 +1,180 @@ -+/* -+ * (C) Copyright 2012 -+ * Henrik Nordstrom -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+ -+enum axp209_reg { -+ AXP209_POWER_STATUS = 0x00, -+ AXP209_CHIP_VERSION = 0x03, -+ AXP209_DCDC2_VOLTAGE = 0x23, -+ AXP209_DCDC3_VOLTAGE = 0x27, -+ AXP209_LDO24_VOLTAGE = 0x28, -+ AXP209_LDO3_VOLTAGE = 0x29, -+ AXP209_IRQ_STATUS5 = 0x4c, -+ AXP209_SHUTDOWN = 0x32, -+}; -+ -+#define AXP209_POWER_STATUS_ON_BY_DC (1 << 0) -+ -+#define AXP209_IRQ5_PEK_UP (1 << 6) -+#define AXP209_IRQ5_PEK_DOWN (1 << 5) -+ -+#define AXP209_POWEROFF (1 << 7) -+ -+static int axp209_write(enum axp209_reg reg, u8 val) -+{ -+ return i2c_write(0x34, reg, 1, &val, 1); -+} -+ -+static int axp209_read(enum axp209_reg reg, u8 *val) -+{ -+ return i2c_read(0x34, reg, 1, val, 1); -+} -+ -+static int axp209_mvolt_to_cfg(int mvolt, int min, int max, int div) -+{ -+ if (mvolt < min) -+ mvolt = min; -+ else if (mvolt > max) -+ mvolt = max; -+ -+ return (mvolt - min) / div; -+} -+ -+int axp209_set_dcdc2(int mvolt) -+{ -+ int cfg, rc; -+ u8 current; -+ -+ cfg = axp209_mvolt_to_cfg(mvolt, 700, 2275, 25); -+ -+ /* Do we really need to be this gentle? It has built-in voltage slope */ -+ while ((rc = axp209_read(AXP209_DCDC2_VOLTAGE, ¤t)) == 0 && -+ current != cfg) { -+ if (current < cfg) -+ current++; -+ else -+ current--; -+ -+ rc = axp209_write(AXP209_DCDC2_VOLTAGE, current); -+ if (rc) -+ break; -+ } -+ -+ return rc; -+} -+ -+int axp209_set_dcdc3(int mvolt) -+{ -+ int cfg = axp209_mvolt_to_cfg(mvolt, 700, 3500, 25); -+ -+ return axp209_write(AXP209_DCDC3_VOLTAGE, cfg); -+} -+ -+int axp209_set_ldo2(int mvolt) -+{ -+ int rc, cfg; -+ u8 reg; -+ -+ cfg = axp209_mvolt_to_cfg(mvolt, 1800, 3300, 100); -+ -+ rc = axp209_read(AXP209_LDO24_VOLTAGE, ®); -+ if (rc) -+ return rc; -+ -+ /* LDO2 configuration is in upper 4 bits */ -+ reg = (reg & 0x0f) | (cfg << 4); -+ return axp209_write(AXP209_LDO24_VOLTAGE, reg); -+} -+ -+int axp209_set_ldo3(int mvolt) -+{ -+ int cfg = axp209_mvolt_to_cfg(mvolt, 700, 2275, 25); -+ -+ if (mvolt == -1) -+ cfg = 0x80; /* determined by LDO3IN pin */ -+ -+ return axp209_write(AXP209_LDO3_VOLTAGE, cfg); -+} -+ -+int axp209_set_ldo4(int mvolt) -+{ -+ int cfg, rc; -+ static const int vindex[] = { -+ 1250, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2500, -+ 2700, 2800, 3000, 3100, 3200, 3300 -+ }; -+ u8 reg; -+ -+ /* Translate mvolt to register cfg value, requested <= selected */ -+ for (cfg = 15; vindex[cfg] > mvolt && cfg > 0; cfg--); -+ -+ rc = axp209_read(AXP209_LDO24_VOLTAGE, ®); -+ if (rc) -+ return rc; -+ -+ /* LDO4 configuration is in lower 4 bits */ -+ reg = (reg & 0xf0) | (cfg << 0); -+ return axp209_write(AXP209_LDO24_VOLTAGE, reg); -+} -+ -+void axp209_poweroff(void) -+{ -+ u8 val; -+ -+ if (axp209_read(AXP209_SHUTDOWN, &val) != 0) -+ return; -+ -+ val |= AXP209_POWEROFF; -+ -+ if (axp209_write(AXP209_SHUTDOWN, val) != 0) -+ return; -+ -+ udelay(10000); /* wait for power to drain */ -+} -+ -+int axp209_init(void) -+{ -+ u8 ver; -+ int rc; -+ -+ rc = axp209_read(AXP209_CHIP_VERSION, &ver); -+ if (rc) -+ return rc; -+ -+ /* Low 4 bits is chip version */ -+ ver &= 0x0f; -+ -+ if (ver != 0x1) -+ return -1; -+ -+ return 0; -+} -+ -+int axp209_poweron_by_dc(void) -+{ -+ u8 v; -+ -+ if (axp209_read(AXP209_POWER_STATUS, &v)) -+ return 0; -+ -+ return (v & AXP209_POWER_STATUS_ON_BY_DC); -+} -+ -+int axp209_power_button(void) -+{ -+ u8 v; -+ -+ if (axp209_read(AXP209_IRQ_STATUS5, &v)) -+ return 0; -+ -+ axp209_write(AXP209_IRQ_STATUS5, AXP209_IRQ5_PEK_DOWN); -+ -+ return v & AXP209_IRQ5_PEK_DOWN; -+} -diff -ruN u-boot-2014.04/drivers/power/axp221.c u-boot-sunxi/drivers/power/axp221.c ---- u-boot-2014.04/drivers/power/axp221.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/drivers/power/axp221.c 2014-09-06 16:58:36.321953111 +0200 -@@ -0,0 +1,73 @@ -+/* -+ * (C) Copyright 2013 Oliver Schinagl -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+ -+int axp221_set_dcdc1(unsigned int mvolt) -+{ -+ return p2wi_write(AXP221_DCDC1_CTRL, (mvolt - 1600) / 100); -+} -+ -+int axp221_set_dcdc2(unsigned int mvolt) -+{ -+ return p2wi_write(AXP221_DCDC2_CTRL, (mvolt - 600) / 20); -+} -+ -+int axp221_set_dcdc3(unsigned int mvolt) -+{ -+ return p2wi_write(AXP221_DCDC3_CTRL, (mvolt - 600) / 20); -+} -+ -+int axp221_set_dcdc4(unsigned int mvolt) -+{ -+ return p2wi_write(AXP221_DCDC4_CTRL, (mvolt - 600) / 20); -+} -+ -+int axp221_set_dcdc5(unsigned int mvolt) -+{ -+ return p2wi_write(AXP221_DCDC5_CTRL, (mvolt - 600) / 20); -+} -+ -+int axp221_set_dldo1(unsigned int mvolt) -+{ -+ int ret; -+ u8 val; -+ -+ ret = p2wi_write(AXP221_DLDO1_CTRL, (mvolt - 700) / 100); -+ if (ret) -+ return ret; -+ -+ ret = p2wi_read(AXP221_OUTPUT_CTRL2, &val); -+ if (ret) -+ return ret; -+ -+ val |= 1 << 3; -+ return p2wi_write(AXP221_OUTPUT_CTRL2, val); -+} -+ -+int axp221_init(void) -+{ -+ u8 axp_chip_id; -+ int ret; -+ -+ p2wi_init(); -+ ret = p2wi_set_pmu_address(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR, -+ AXP221_INIT_DATA); -+ if (ret) -+ return ret; -+ -+ ret = p2wi_read(AXP221_CHIP_ID, &axp_chip_id); -+ if (ret) -+ return ret; -+ -+ if (!(axp_chip_id == 0x6 || axp_chip_id == 0x7 || axp_chip_id == 0x17)) -+ return -ENODEV; -+ -+ return 0; -+} -diff -ruN u-boot-2014.04/drivers/power/Makefile u-boot-sunxi/drivers/power/Makefile ---- u-boot-2014.04/drivers/power/Makefile 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/drivers/power/Makefile 2014-09-06 16:58:36.321953111 +0200 -@@ -5,6 +5,9 @@ - # SPDX-License-Identifier: GPL-2.0+ - # - -+obj-$(CONFIG_AXP152_POWER) += axp152.o -+obj-$(CONFIG_AXP209_POWER) += axp209.o -+obj-$(CONFIG_AXP221_POWER) += axp221.o - obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o - obj-$(CONFIG_FTPMU010_POWER) += ftpmu010.o - obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o -diff -ruN u-boot-2014.04/drivers/serial/arm_dcc.c u-boot-sunxi/drivers/serial/arm_dcc.c ---- u-boot-2014.04/drivers/serial/arm_dcc.c 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/drivers/serial/arm_dcc.c 2014-09-06 16:58:36.329953111 +0200 -@@ -29,7 +29,7 @@ - #include - #include - --#if defined(CONFIG_CPU_V6) -+#if defined(CONFIG_CPU_V6) || 1 - /* - * ARMV6 - */ -diff -ruN u-boot-2014.04/.git/config u-boot-sunxi/.git/config ---- u-boot-2014.04/.git/config 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/config 2014-09-06 16:58:35.001953150 +0200 -@@ -0,0 +1,11 @@ -+[core] -+ repositoryformatversion = 0 -+ filemode = true -+ bare = false -+ logallrefupdates = true -+[remote "origin"] -+ fetch = +refs/heads/*:refs/remotes/origin/* -+ url = https://github.com/linux-sunxi/u-boot-sunxi -+[branch "sunxi"] -+ remote = origin -+ merge = refs/heads/sunxi -diff -ruN u-boot-2014.04/.git/description u-boot-sunxi/.git/description ---- u-boot-2014.04/.git/description 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/description 2014-09-06 16:58:09.553953909 +0200 -@@ -0,0 +1 @@ -+Unnamed repository; edit this file 'description' to name the repository. -diff -ruN u-boot-2014.04/.git/HEAD u-boot-sunxi/.git/HEAD ---- u-boot-2014.04/.git/HEAD 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/HEAD 2014-09-06 16:58:35.001953150 +0200 -@@ -0,0 +1 @@ -+ref: refs/heads/sunxi -diff -ruN u-boot-2014.04/.git/hooks/applypatch-msg.sample u-boot-sunxi/.git/hooks/applypatch-msg.sample ---- u-boot-2014.04/.git/hooks/applypatch-msg.sample 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/hooks/applypatch-msg.sample 2014-09-06 16:58:09.553953909 +0200 -@@ -0,0 +1,15 @@ -+#!/bin/sh -+# -+# An example hook script to check the commit log message taken by -+# applypatch from an e-mail message. -+# -+# The hook should exit with non-zero status after issuing an -+# appropriate message if it wants to stop the commit. The hook is -+# allowed to edit the commit message file. -+# -+# To enable this hook, rename this file to "applypatch-msg". -+ -+. git-sh-setup -+test -x "$GIT_DIR/hooks/commit-msg" && -+ exec "$GIT_DIR/hooks/commit-msg" ${1+"$@"} -+: -diff -ruN u-boot-2014.04/.git/hooks/commit-msg.sample u-boot-sunxi/.git/hooks/commit-msg.sample ---- u-boot-2014.04/.git/hooks/commit-msg.sample 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/hooks/commit-msg.sample 2014-09-06 16:58:09.553953909 +0200 -@@ -0,0 +1,24 @@ -+#!/bin/sh -+# -+# An example hook script to check the commit log message. -+# Called by "git commit" with one argument, the name of the file -+# that has the commit message. The hook should exit with non-zero -+# status after issuing an appropriate message if it wants to stop the -+# commit. The hook is allowed to edit the commit message file. -+# -+# To enable this hook, rename this file to "commit-msg". -+ -+# Uncomment the below to add a Signed-off-by line to the message. -+# Doing this in a hook is a bad idea in general, but the prepare-commit-msg -+# hook is more suited to it. -+# -+# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p') -+# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1" -+ -+# This example catches duplicate Signed-off-by lines. -+ -+test "" = "$(grep '^Signed-off-by: ' "$1" | -+ sort | uniq -c | sed -e '/^[ ]*1[ ]/d')" || { -+ echo >&2 Duplicate Signed-off-by lines. -+ exit 1 -+} -diff -ruN u-boot-2014.04/.git/hooks/post-update.sample u-boot-sunxi/.git/hooks/post-update.sample ---- u-boot-2014.04/.git/hooks/post-update.sample 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/hooks/post-update.sample 2014-09-06 16:58:09.553953909 +0200 -@@ -0,0 +1,8 @@ -+#!/bin/sh -+# -+# An example hook script to prepare a packed repository for use over -+# dumb transports. -+# -+# To enable this hook, rename this file to "post-update". -+ -+exec git update-server-info -diff -ruN u-boot-2014.04/.git/hooks/pre-applypatch.sample u-boot-sunxi/.git/hooks/pre-applypatch.sample ---- u-boot-2014.04/.git/hooks/pre-applypatch.sample 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/hooks/pre-applypatch.sample 2014-09-06 16:58:09.553953909 +0200 -@@ -0,0 +1,14 @@ -+#!/bin/sh -+# -+# An example hook script to verify what is about to be committed -+# by applypatch from an e-mail message. -+# -+# The hook should exit with non-zero status after issuing an -+# appropriate message if it wants to stop the commit. -+# -+# To enable this hook, rename this file to "pre-applypatch". -+ -+. git-sh-setup -+test -x "$GIT_DIR/hooks/pre-commit" && -+ exec "$GIT_DIR/hooks/pre-commit" ${1+"$@"} -+: -diff -ruN u-boot-2014.04/.git/hooks/pre-commit.sample u-boot-sunxi/.git/hooks/pre-commit.sample ---- u-boot-2014.04/.git/hooks/pre-commit.sample 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/hooks/pre-commit.sample 2014-09-06 16:58:09.553953909 +0200 -@@ -0,0 +1,50 @@ -+#!/bin/sh -+# -+# An example hook script to verify what is about to be committed. -+# Called by "git commit" with no arguments. The hook should -+# exit with non-zero status after issuing an appropriate message if -+# it wants to stop the commit. -+# -+# To enable this hook, rename this file to "pre-commit". -+ -+if git rev-parse --verify HEAD >/dev/null 2>&1 -+then -+ against=HEAD -+else -+ # Initial commit: diff against an empty tree object -+ against=4b825dc642cb6eb9a060e54bf8d69288fbee4904 -+fi -+ -+# If you want to allow non-ascii filenames set this variable to true. -+allownonascii=$(git config hooks.allownonascii) -+ -+# Redirect output to stderr. -+exec 1>&2 -+ -+# Cross platform projects tend to avoid non-ascii filenames; prevent -+# them from being added to the repository. We exploit the fact that the -+# printable range starts at the space character and ends with tilde. -+if [ "$allownonascii" != "true" ] && -+ # Note that the use of brackets around a tr range is ok here, (it's -+ # even required, for portability to Solaris 10's /usr/bin/tr), since -+ # the square bracket bytes happen to fall in the designated range. -+ test $(git diff --cached --name-only --diff-filter=A -z $against | -+ LC_ALL=C tr -d '[ -~]\0' | wc -c) != 0 -+then -+ echo "Error: Attempt to add a non-ascii file name." -+ echo -+ echo "This can cause problems if you want to work" -+ echo "with people on other platforms." -+ echo -+ echo "To be portable it is advisable to rename the file ..." -+ echo -+ echo "If you know what you are doing you can disable this" -+ echo "check using:" -+ echo -+ echo " git config hooks.allownonascii true" -+ echo -+ exit 1 -+fi -+ -+# If there are whitespace errors, print the offending file names and fail. -+exec git diff-index --check --cached $against -- -diff -ruN u-boot-2014.04/.git/hooks/prepare-commit-msg.sample u-boot-sunxi/.git/hooks/prepare-commit-msg.sample ---- u-boot-2014.04/.git/hooks/prepare-commit-msg.sample 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/hooks/prepare-commit-msg.sample 2014-09-06 16:58:09.553953909 +0200 -@@ -0,0 +1,36 @@ -+#!/bin/sh -+# -+# An example hook script to prepare the commit log message. -+# Called by "git commit" with the name of the file that has the -+# commit message, followed by the description of the commit -+# message's source. The hook's purpose is to edit the commit -+# message file. If the hook fails with a non-zero status, -+# the commit is aborted. -+# -+# To enable this hook, rename this file to "prepare-commit-msg". -+ -+# This hook includes three examples. The first comments out the -+# "Conflicts:" part of a merge commit. -+# -+# The second includes the output of "git diff --name-status -r" -+# into the message, just before the "git status" output. It is -+# commented because it doesn't cope with --amend or with squashed -+# commits. -+# -+# The third example adds a Signed-off-by line to the message, that can -+# still be edited. This is rarely a good idea. -+ -+case "$2,$3" in -+ merge,) -+ /usr/bin/perl -i.bak -ne 's/^/# /, s/^# #/#/ if /^Conflicts/ .. /#/; print' "$1" ;; -+ -+# ,|template,) -+# /usr/bin/perl -i.bak -pe ' -+# print "\n" . `git diff --cached --name-status -r` -+# if /^#/ && $first++ == 0' "$1" ;; -+ -+ *) ;; -+esac -+ -+# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p') -+# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1" -diff -ruN u-boot-2014.04/.git/hooks/pre-rebase.sample u-boot-sunxi/.git/hooks/pre-rebase.sample ---- u-boot-2014.04/.git/hooks/pre-rebase.sample 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/hooks/pre-rebase.sample 2014-09-06 16:58:09.553953909 +0200 -@@ -0,0 +1,169 @@ -+#!/bin/sh -+# -+# Copyright (c) 2006, 2008 Junio C Hamano -+# -+# The "pre-rebase" hook is run just before "git rebase" starts doing -+# its job, and can prevent the command from running by exiting with -+# non-zero status. -+# -+# The hook is called with the following parameters: -+# -+# $1 -- the upstream the series was forked from. -+# $2 -- the branch being rebased (or empty when rebasing the current branch). -+# -+# This sample shows how to prevent topic branches that are already -+# merged to 'next' branch from getting rebased, because allowing it -+# would result in rebasing already published history. -+ -+publish=next -+basebranch="$1" -+if test "$#" = 2 -+then -+ topic="refs/heads/$2" -+else -+ topic=`git symbolic-ref HEAD` || -+ exit 0 ;# we do not interrupt rebasing detached HEAD -+fi -+ -+case "$topic" in -+refs/heads/??/*) -+ ;; -+*) -+ exit 0 ;# we do not interrupt others. -+ ;; -+esac -+ -+# Now we are dealing with a topic branch being rebased -+# on top of master. Is it OK to rebase it? -+ -+# Does the topic really exist? -+git show-ref -q "$topic" || { -+ echo >&2 "No such branch $topic" -+ exit 1 -+} -+ -+# Is topic fully merged to master? -+not_in_master=`git rev-list --pretty=oneline ^master "$topic"` -+if test -z "$not_in_master" -+then -+ echo >&2 "$topic is fully merged to master; better remove it." -+ exit 1 ;# we could allow it, but there is no point. -+fi -+ -+# Is topic ever merged to next? If so you should not be rebasing it. -+only_next_1=`git rev-list ^master "^$topic" ${publish} | sort` -+only_next_2=`git rev-list ^master ${publish} | sort` -+if test "$only_next_1" = "$only_next_2" -+then -+ not_in_topic=`git rev-list "^$topic" master` -+ if test -z "$not_in_topic" -+ then -+ echo >&2 "$topic is already up-to-date with master" -+ exit 1 ;# we could allow it, but there is no point. -+ else -+ exit 0 -+ fi -+else -+ not_in_next=`git rev-list --pretty=oneline ^${publish} "$topic"` -+ /usr/bin/perl -e ' -+ my $topic = $ARGV[0]; -+ my $msg = "* $topic has commits already merged to public branch:\n"; -+ my (%not_in_next) = map { -+ /^([0-9a-f]+) /; -+ ($1 => 1); -+ } split(/\n/, $ARGV[1]); -+ for my $elem (map { -+ /^([0-9a-f]+) (.*)$/; -+ [$1 => $2]; -+ } split(/\n/, $ARGV[2])) { -+ if (!exists $not_in_next{$elem->[0]}) { -+ if ($msg) { -+ print STDERR $msg; -+ undef $msg; -+ } -+ print STDERR " $elem->[1]\n"; -+ } -+ } -+ ' "$topic" "$not_in_next" "$not_in_master" -+ exit 1 -+fi -+ -+<<\DOC_END -+ -+This sample hook safeguards topic branches that have been -+published from being rewound. -+ -+The workflow assumed here is: -+ -+ * Once a topic branch forks from "master", "master" is never -+ merged into it again (either directly or indirectly). -+ -+ * Once a topic branch is fully cooked and merged into "master", -+ it is deleted. If you need to build on top of it to correct -+ earlier mistakes, a new topic branch is created by forking at -+ the tip of the "master". This is not strictly necessary, but -+ it makes it easier to keep your history simple. -+ -+ * Whenever you need to test or publish your changes to topic -+ branches, merge them into "next" branch. -+ -+The script, being an example, hardcodes the publish branch name -+to be "next", but it is trivial to make it configurable via -+$GIT_DIR/config mechanism. -+ -+With this workflow, you would want to know: -+ -+(1) ... if a topic branch has ever been merged to "next". Young -+ topic branches can have stupid mistakes you would rather -+ clean up before publishing, and things that have not been -+ merged into other branches can be easily rebased without -+ affecting other people. But once it is published, you would -+ not want to rewind it. -+ -+(2) ... if a topic branch has been fully merged to "master". -+ Then you can delete it. More importantly, you should not -+ build on top of it -- other people may already want to -+ change things related to the topic as patches against your -+ "master", so if you need further changes, it is better to -+ fork the topic (perhaps with the same name) afresh from the -+ tip of "master". -+ -+Let's look at this example: -+ -+ o---o---o---o---o---o---o---o---o---o "next" -+ / / / / -+ / a---a---b A / / -+ / / / / -+ / / c---c---c---c B / -+ / / / \ / -+ / / / b---b C \ / -+ / / / / \ / -+ ---o---o---o---o---o---o---o---o---o---o---o "master" -+ -+ -+A, B and C are topic branches. -+ -+ * A has one fix since it was merged up to "next". -+ -+ * B has finished. It has been fully merged up to "master" and "next", -+ and is ready to be deleted. -+ -+ * C has not merged to "next" at all. -+ -+We would want to allow C to be rebased, refuse A, and encourage -+B to be deleted. -+ -+To compute (1): -+ -+ git rev-list ^master ^topic next -+ git rev-list ^master next -+ -+ if these match, topic has not merged in next at all. -+ -+To compute (2): -+ -+ git rev-list master..topic -+ -+ if this is empty, it is fully merged to "master". -+ -+DOC_END -diff -ruN u-boot-2014.04/.git/hooks/update.sample u-boot-sunxi/.git/hooks/update.sample ---- u-boot-2014.04/.git/hooks/update.sample 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/hooks/update.sample 2014-09-06 16:58:09.553953909 +0200 -@@ -0,0 +1,128 @@ -+#!/bin/sh -+# -+# An example hook script to blocks unannotated tags from entering. -+# Called by "git receive-pack" with arguments: refname sha1-old sha1-new -+# -+# To enable this hook, rename this file to "update". -+# -+# Config -+# ------ -+# hooks.allowunannotated -+# This boolean sets whether unannotated tags will be allowed into the -+# repository. By default they won't be. -+# hooks.allowdeletetag -+# This boolean sets whether deleting tags will be allowed in the -+# repository. By default they won't be. -+# hooks.allowmodifytag -+# This boolean sets whether a tag may be modified after creation. By default -+# it won't be. -+# hooks.allowdeletebranch -+# This boolean sets whether deleting branches will be allowed in the -+# repository. By default they won't be. -+# hooks.denycreatebranch -+# This boolean sets whether remotely creating branches will be denied -+# in the repository. By default this is allowed. -+# -+ -+# --- Command line -+refname="$1" -+oldrev="$2" -+newrev="$3" -+ -+# --- Safety check -+if [ -z "$GIT_DIR" ]; then -+ echo "Don't run this script from the command line." >&2 -+ echo " (if you want, you could supply GIT_DIR then run" >&2 -+ echo " $0 )" >&2 -+ exit 1 -+fi -+ -+if [ -z "$refname" -o -z "$oldrev" -o -z "$newrev" ]; then -+ echo "Usage: $0 " >&2 -+ exit 1 -+fi -+ -+# --- Config -+allowunannotated=$(git config --bool hooks.allowunannotated) -+allowdeletebranch=$(git config --bool hooks.allowdeletebranch) -+denycreatebranch=$(git config --bool hooks.denycreatebranch) -+allowdeletetag=$(git config --bool hooks.allowdeletetag) -+allowmodifytag=$(git config --bool hooks.allowmodifytag) -+ -+# check for no description -+projectdesc=$(sed -e '1q' "$GIT_DIR/description") -+case "$projectdesc" in -+"Unnamed repository"* | "") -+ echo "*** Project description file hasn't been set" >&2 -+ exit 1 -+ ;; -+esac -+ -+# --- Check types -+# if $newrev is 0000...0000, it's a commit to delete a ref. -+zero="0000000000000000000000000000000000000000" -+if [ "$newrev" = "$zero" ]; then -+ newrev_type=delete -+else -+ newrev_type=$(git cat-file -t $newrev) -+fi -+ -+case "$refname","$newrev_type" in -+ refs/tags/*,commit) -+ # un-annotated tag -+ short_refname=${refname##refs/tags/} -+ if [ "$allowunannotated" != "true" ]; then -+ echo "*** The un-annotated tag, $short_refname, is not allowed in this repository" >&2 -+ echo "*** Use 'git tag [ -a | -s ]' for tags you want to propagate." >&2 -+ exit 1 -+ fi -+ ;; -+ refs/tags/*,delete) -+ # delete tag -+ if [ "$allowdeletetag" != "true" ]; then -+ echo "*** Deleting a tag is not allowed in this repository" >&2 -+ exit 1 -+ fi -+ ;; -+ refs/tags/*,tag) -+ # annotated tag -+ if [ "$allowmodifytag" != "true" ] && git rev-parse $refname > /dev/null 2>&1 -+ then -+ echo "*** Tag '$refname' already exists." >&2 -+ echo "*** Modifying a tag is not allowed in this repository." >&2 -+ exit 1 -+ fi -+ ;; -+ refs/heads/*,commit) -+ # branch -+ if [ "$oldrev" = "$zero" -a "$denycreatebranch" = "true" ]; then -+ echo "*** Creating a branch is not allowed in this repository" >&2 -+ exit 1 -+ fi -+ ;; -+ refs/heads/*,delete) -+ # delete branch -+ if [ "$allowdeletebranch" != "true" ]; then -+ echo "*** Deleting a branch is not allowed in this repository" >&2 -+ exit 1 -+ fi -+ ;; -+ refs/remotes/*,commit) -+ # tracking branch -+ ;; -+ refs/remotes/*,delete) -+ # delete tracking branch -+ if [ "$allowdeletebranch" != "true" ]; then -+ echo "*** Deleting a tracking branch is not allowed in this repository" >&2 -+ exit 1 -+ fi -+ ;; -+ *) -+ # Anything else (is there anything else?) -+ echo "*** Update hook: unknown type of update to ref $refname of type $newrev_type" >&2 -+ exit 1 -+ ;; -+esac -+ -+# --- Finished -+exit 0 -Binary files u-boot-2014.04/.git/index and u-boot-sunxi/.git/index differ -diff -ruN u-boot-2014.04/.git/info/exclude u-boot-sunxi/.git/info/exclude ---- u-boot-2014.04/.git/info/exclude 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/info/exclude 2014-09-06 16:58:09.553953909 +0200 -@@ -0,0 +1,6 @@ -+# git ls-files --others --exclude-from=.git/info/exclude -+# Lines that start with '#' are comments. -+# For a project mostly in C, the following would be a good set of -+# exclude patterns (uncomment them if you want to use them): -+# *.[oa] -+# *~ -diff -ruN u-boot-2014.04/.git/logs/HEAD u-boot-sunxi/.git/logs/HEAD ---- u-boot-2014.04/.git/logs/HEAD 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/logs/HEAD 2014-09-06 16:58:35.001953150 +0200 -@@ -0,0 +1 @@ -+0000000000000000000000000000000000000000 509d96d4f1f602d62d36db660973249e16f9d088 Zoltan HERPAI 1410015515 +0200 clone: from https://github.com/linux-sunxi/u-boot-sunxi -diff -ruN u-boot-2014.04/.git/logs/refs/heads/sunxi u-boot-sunxi/.git/logs/refs/heads/sunxi ---- u-boot-2014.04/.git/logs/refs/heads/sunxi 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/logs/refs/heads/sunxi 2014-09-06 16:58:35.001953150 +0200 -@@ -0,0 +1 @@ -+0000000000000000000000000000000000000000 509d96d4f1f602d62d36db660973249e16f9d088 Zoltan HERPAI 1410015515 +0200 clone: from https://github.com/linux-sunxi/u-boot-sunxi -diff -ruN u-boot-2014.04/.git/logs/refs/remotes/origin/HEAD u-boot-sunxi/.git/logs/refs/remotes/origin/HEAD ---- u-boot-2014.04/.git/logs/refs/remotes/origin/HEAD 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/logs/refs/remotes/origin/HEAD 2014-09-06 16:58:35.001953150 +0200 -@@ -0,0 +1 @@ -+0000000000000000000000000000000000000000 509d96d4f1f602d62d36db660973249e16f9d088 Zoltan HERPAI 1410015515 +0200 clone: from https://github.com/linux-sunxi/u-boot-sunxi -Binary files u-boot-2014.04/.git/objects/pack/pack-67611423d2b8399a45fe3205d396caff441c8135.idx and u-boot-sunxi/.git/objects/pack/pack-67611423d2b8399a45fe3205d396caff441c8135.idx differ -Binary files u-boot-2014.04/.git/objects/pack/pack-67611423d2b8399a45fe3205d396caff441c8135.pack and u-boot-sunxi/.git/objects/pack/pack-67611423d2b8399a45fe3205d396caff441c8135.pack differ -diff -ruN u-boot-2014.04/.git/packed-refs u-boot-sunxi/.git/packed-refs ---- u-boot-2014.04/.git/packed-refs 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/packed-refs 2014-09-06 16:58:35.001953150 +0200 -@@ -0,0 +1,25 @@ -+# pack-refs with: peeled -+3212c6fd4beaa14a21a57e5241022702c986f82e refs/remotes/origin/lichee-dev -+c0860ba179bc0cf016831ceeeacd0dd4e287a860 refs/remotes/origin/lichee-dev-a20 -+1076d3bdd67db39f34bc91857c636525874441ae refs/remotes/origin/lichee/lichee-dev -+40b4fba701c1824cc60c7ab966f4a5dd674e947d refs/remotes/origin/lichee/lichee-dev-ICS -+cf54463fd782c690cf790ca35b5a15504b57c287 refs/remotes/origin/lichee/lichee-dev-mmc -+218f643881c0dabd7e40cdb21a757416fa80afb2 refs/remotes/origin/old/sunxi-current -+509d96d4f1f602d62d36db660973249e16f9d088 refs/remotes/origin/sunxi -+43fb1236c3330676f49220cc1dfc235eb0558e4c refs/remotes/origin/sunxi-patchqueue -+80fd9a5c5b87ba2f48f4a71b666839870e780be6 refs/remotes/origin/wip/a20 -+27113637710a574d1fb6325817ffa9ced7afe019 refs/tags/v2011.09-sun4i -+^22b38fa5c0348ac4f285f038999f9a617f98e73a -+9ba56441491542cd06b30c514e544d96b29ef801 refs/tags/v2011.09-sun4i-20120808 -+88eacf3372855579760ba6bc8fa3e0d4e53fdef8 refs/tags/v2012.10-sunxi -+1ae18d97d24c5d6dd4cb7949d8e5fb602728601c refs/tags/v2013.01-sunxi -+fc40799c144d035c595c4abe3032a03be8f0e2c4 refs/tags/v2013.01.01-sunxi -+90c8c0c88362d1e39bb1433f04b9a21bb1c74e45 refs/tags/v2013.04-sunxi -+57ff4519ba0f47f1647f7def5864ae4c9ef3e6a0 refs/tags/v2013.07-rc1-sunxi -+c416374795b584f025a80b1f81db215456567155 refs/tags/v2013.07-sunxi -+8969c6f654248ececdfcf05eb51de9a8bc0a8703 refs/tags/v2013.07-sunxi.2 -+88b1df7ee9c15c821a2209791f513b21596f21b4 refs/tags/v2013.07-sunxi.3 -+569c37da7dfd4ed93b6e8b5993df760b9ed18c8d refs/tags/v2013.07-sunxi.4 -+7a63a6882876b76e47746c1254e8cd1120a52b0d refs/tags/v2013.10-rc1-sunxi -+951e509384822e39149c22f44cde6a01f5105c40 refs/tags/v2013.10-rc2-sunxi -+09ef3a640a3eb58e66eedcf239193e2ab548e730 refs/tags/v2013.10-sunxi -diff -ruN u-boot-2014.04/.git/refs/heads/sunxi u-boot-sunxi/.git/refs/heads/sunxi ---- u-boot-2014.04/.git/refs/heads/sunxi 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/refs/heads/sunxi 2014-09-06 16:58:35.001953150 +0200 -@@ -0,0 +1 @@ -+509d96d4f1f602d62d36db660973249e16f9d088 -diff -ruN u-boot-2014.04/.git/refs/remotes/origin/HEAD u-boot-sunxi/.git/refs/remotes/origin/HEAD ---- u-boot-2014.04/.git/refs/remotes/origin/HEAD 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/.git/refs/remotes/origin/HEAD 2014-09-06 16:58:35.001953150 +0200 -@@ -0,0 +1 @@ -+ref: refs/remotes/origin/sunxi -diff -ruN u-boot-2014.04/include/axp152.h u-boot-sunxi/include/axp152.h ---- u-boot-2014.04/include/axp152.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/include/axp152.h 2014-09-06 16:58:36.397953109 +0200 -@@ -0,0 +1,11 @@ -+/* -+ * (C) Copyright 2012 Henrik Nordstrom -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+int axp152_set_dcdc2(int mvolt); -+int axp152_set_dcdc3(int mvolt); -+int axp152_set_dcdc4(int mvolt); -+int axp152_set_ldo2(int mvolt); -+void axp152_poweroff(void); -+int axp152_init(void); -diff -ruN u-boot-2014.04/include/axp209.h u-boot-sunxi/include/axp209.h ---- u-boot-2014.04/include/axp209.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/include/axp209.h 2014-09-06 16:58:36.397953109 +0200 -@@ -0,0 +1,15 @@ -+/* -+ * (C) Copyright 2012 Henrik Nordstrom -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+extern int axp209_set_dcdc2(int mvolt); -+extern int axp209_set_dcdc3(int mvolt); -+extern int axp209_set_ldo2(int mvolt); -+extern int axp209_set_ldo3(int mvolt); -+extern int axp209_set_ldo4(int mvolt); -+extern void axp209_poweroff(void); -+extern int axp209_init(void); -+extern int axp209_poweron_by_dc(void); -+extern int axp209_power_button(void); -diff -ruN u-boot-2014.04/include/axp221.h u-boot-sunxi/include/axp221.h ---- u-boot-2014.04/include/axp221.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/include/axp221.h 2014-09-06 16:58:36.397953109 +0200 -@@ -0,0 +1,30 @@ -+/* -+ * (C) Copyright 2013 Oliver Schinagl -+ * -+ * X-Powers AXP221 Power Management IC driver -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#define AXP221_CHIP_ADDR 0x68 -+#define AXP221_CTRL_ADDR 0x3e -+#define AXP221_INIT_DATA 0x3e -+ -+#define AXP221_CHIP_ID 0x03 -+#define AXP221_OUTPUT_CTRL1 0x10 -+#define AXP221_OUTPUT_CTRL2 0x12 -+#define AXP221_OUTPUT_CTRL3 0x13 -+#define AXP221_DLDO1_CTRL 0x15 -+#define AXP221_DCDC1_CTRL 0x21 -+#define AXP221_DCDC2_CTRL 0x22 -+#define AXP221_DCDC3_CTRL 0x23 -+#define AXP221_DCDC4_CTRL 0x24 -+#define AXP221_DCDC5_CTRL 0x25 -+ -+int axp221_set_dcdc1(unsigned int mvolt); -+int axp221_set_dcdc2(unsigned int mvolt); -+int axp221_set_dcdc3(unsigned int mvolt); -+int axp221_set_dcdc4(unsigned int mvolt); -+int axp221_set_dcdc5(unsigned int mvolt); -+int axp221_set_dldo1(unsigned int mvolt); -+int axp221_init(void); -diff -ruN u-boot-2014.04/include/config_fallbacks.h u-boot-sunxi/include/config_fallbacks.h ---- u-boot-2014.04/include/config_fallbacks.h 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/include/config_fallbacks.h 2014-09-06 16:58:36.401953108 +0200 -@@ -55,6 +55,10 @@ - #define HAVE_BLOCK_DEVICE - #endif - -+#ifndef CONFIG_SYS_BOARD_NAME -+#define CONFIG_SYS_BOARD_NAME CONFIG_SYS_TARGET -+#endif -+ - #if (defined(CONFIG_PARTITION_UUIDS) || \ - defined(CONFIG_EFI_PARTITION) || \ - defined(CONFIG_RANDOM_UUID) || \ -diff -ruN u-boot-2014.04/include/configs/sun4i.h u-boot-sunxi/include/configs/sun4i.h ---- u-boot-2014.04/include/configs/sun4i.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/include/configs/sun4i.h 2014-09-06 16:58:36.461953107 +0200 -@@ -0,0 +1,25 @@ -+/* -+ * (C) Copyright 2012-2013 Henrik Nordstrom -+ * -+ * Configuration settings for the Allwinner A10 (sun4i) CPU -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+/* -+ * A10 specific configuration -+ */ -+#define CONFIG_SUN4I /* sun4i SoC generation */ -+#define CONFIG_CLK_FULL_SPEED 1008000000 -+ -+#define CONFIG_SYS_PROMPT "sun4i# " -+#define CONFIG_MACH_TYPE 4104 -+ -+/* -+ * Include common sunxi configuration where most the settings are -+ */ -+#include -+ -+#endif /* __CONFIG_H */ -diff -ruN u-boot-2014.04/include/configs/sun5i.h u-boot-sunxi/include/configs/sun5i.h ---- u-boot-2014.04/include/configs/sun5i.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/include/configs/sun5i.h 2014-09-06 16:58:36.461953107 +0200 -@@ -0,0 +1,25 @@ -+/* -+ * (C) Copyright 2012-2013 Henrik Nordstrom -+ * -+ * Configuration settings for the Allwinner A13 (sun5i) CPU -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+/* -+ * High Level Configuration Options -+ */ -+#define CONFIG_SUN5I /* sun5i SoC generation */ -+#define CONFIG_CLK_FULL_SPEED 1008000000 -+ -+#define CONFIG_SYS_PROMPT "sun5i# " -+#define CONFIG_MACH_TYPE 4138 -+ -+/* -+ * Include common sunxi configuration where most the settings are -+ */ -+#include -+ -+#endif /* __CONFIG_H */ -diff -ruN u-boot-2014.04/include/configs/sun6i.h u-boot-sunxi/include/configs/sun6i.h ---- u-boot-2014.04/include/configs/sun6i.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/include/configs/sun6i.h 2014-09-06 16:58:36.461953107 +0200 -@@ -0,0 +1,43 @@ -+/* -+ * (C) Copyright 2012-2013 Henrik Nordstrom -+ * (C) Copyright 2013 Luke Kenneth Casson Leighton -+ * (C) Copyright 2013 Maxime Ripard -+ * -+ * Configuration settings for the Allwinner A31 (sun6i) CPU -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+/* -+ * A31 specific configuration -+ */ -+#define CONFIG_SUN6I /* sun6i SoC generation */ -+ -+#define CONFIG_SYS_PROMPT "sun6i# " -+#define CONFIG_MACH_TYPE 3892 -+ -+/* -+ * Include common sunxi configuration where most the settings are -+ */ -+#include -+ -+#endif /* __CONFIG_H */ -diff -ruN u-boot-2014.04/include/configs/sun7i.h u-boot-sunxi/include/configs/sun7i.h ---- u-boot-2014.04/include/configs/sun7i.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/include/configs/sun7i.h 2014-09-06 16:58:36.461953107 +0200 -@@ -0,0 +1,30 @@ -+/* -+ * (C) Copyright 2012-2013 Henrik Nordstrom -+ * (C) Copyright 2013 Luke Kenneth Casson Leighton -+ * -+ * Configuration settings for the Allwinner A20 (sun7i) CPU -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+/* -+ * A20 specific configuration -+ */ -+#define CONFIG_SUN7I /* sun7i SoC generation */ -+#define CONFIG_CLK_FULL_SPEED 912000000 -+ -+#define CONFIG_SYS_PROMPT "sun7i# " -+#define CONFIG_MACH_TYPE 4283 -+ -+#if defined(CONFIG_SYS_SECONDARY_ON) -+#define CONFIG_BOARD_POSTCLK_INIT 1 -+#endif -+ -+/* -+ * Include common sunxi configuration where most the settings are -+ */ -+#include -+ -+#endif /* __CONFIG_H */ -diff -ruN u-boot-2014.04/include/configs/sun8i.h u-boot-sunxi/include/configs/sun8i.h ---- u-boot-2014.04/include/configs/sun8i.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/include/configs/sun8i.h 2014-09-06 16:58:36.461953107 +0200 -@@ -0,0 +1,28 @@ -+/* -+ * (C) Copyright 2012-2013 Henrik Nordstrom -+ * (C) Copyright 2013 Luke Kenneth Casson Leighton -+ * (C) Copyright 2013 Maxime Ripard -+ * (C) Copyright 2014 Chen-Yu Tsai -+ * -+ * Configuration settings for the Allwinner A23 (sun8i) CPU -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+/* -+ * A23 specific configuration -+ */ -+#define CONFIG_SUN8I /* sun8i SoC generation */ -+ -+#define CONFIG_SYS_PROMPT "sun8i# " -+#define CONFIG_MACH_TYPE 4137 -+ -+/* -+ * Include common sunxi configuration where most the settings are -+ */ -+#include -+ -+#endif /* __CONFIG_H */ -diff -ruN u-boot-2014.04/include/configs/sunxi-common.h u-boot-sunxi/include/configs/sunxi-common.h ---- u-boot-2014.04/include/configs/sunxi-common.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/include/configs/sunxi-common.h 2014-09-06 16:58:36.461953107 +0200 -@@ -0,0 +1,427 @@ -+/* -+ * (C) Copyright 2012-2012 Henrik Nordstrom -+ * -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * Configuration settings for the Allwinner sunxi series of boards. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _SUNXI_COMMON_CONFIG_H -+#define _SUNXI_COMMON_CONFIG_H -+ -+/* -+ * High Level Configuration Options -+ */ -+#define CONFIG_SUNXI /* sunxi family */ -+#ifdef CONFIG_SPL_BUILD -+#ifndef CONFIG_SPL_FEL -+#define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ -+#endif -+#endif -+ -+#include /* get chip and board defs */ -+ -+#define CONFIG_SYS_TEXT_BASE 0x4a000000 -+ -+/* -+ * Display CPU and Board information -+ */ -+#define CONFIG_DISPLAY_CPUINFO -+#define CONFIG_DISPLAY_BOARDINFO -+ -+/* Serial & console */ -+#define CONFIG_SYS_NS16550 -+#define CONFIG_SYS_NS16550_SERIAL -+/* ns16550 reg in the low bits of cpu reg */ -+#define CONFIG_SYS_NS16550_REG_SIZE -4 -+#define CONFIG_SYS_NS16550_CLK 24000000 -+#define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE -+#define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE -+#define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE -+#define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE -+#define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE -+ -+/* DRAM Base */ -+#define CONFIG_SYS_SDRAM_BASE 0x40000000 -+#define CONFIG_SYS_INIT_RAM_ADDR 0x0 -+#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ -+ -+#define CONFIG_SYS_INIT_SP_OFFSET \ -+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -+#define CONFIG_SYS_INIT_SP_ADDR \ -+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -+ -+/* A10 has 1 banks of DRAM, we use only bank 1 in U-Boot */ -+#define CONFIG_NR_DRAM_BANKS 1 -+#define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE -+#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN7I) -+#define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ -+#else -+#define PHYS_SDRAM_0_SIZE 0x40000000 /* 1 GiB */ -+#endif -+#if 0 -+/* Nand config */ -+#define CONFIG_NAND -+#define CONFIG_NAND_SUNXI -+#define CONFIG_CMD_NAND /* NAND support */ -+#define CONFIG_SYS_MAX_NAND_DEVICE 1 -+#define CONFIG_SYS_NAND_BASE 0x00 -+#endif -+ -+#define CONFIG_CMD_MEMORY -+#define CONFIG_CMD_SETEXPR -+ -+#define CONFIG_SETUP_MEMORY_TAGS -+#define CONFIG_CMDLINE_TAG -+#define CONFIG_INITRD_TAG -+ -+/* mmc config */ -+/* Can't use MMC slot 0 if the UART is directed there */ -+#if !defined CONFIG_UART0_PORT_F || CONFIG_MMC_SUNXI_SLOT != 0 -+#define CONFIG_MMC -+#define CONFIG_GENERIC_MMC -+#define CONFIG_CMD_MMC -+#define CONFIG_MMC_SUNXI -+#ifndef CONFIG_MMC_SUNXI_SLOT -+#define CONFIG_MMC_SUNXI_SLOT 0 -+#endif -+#define CONFIG_ENV_IS_IN_MMC -+#define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ -+#endif -+ -+/* 4MB of malloc() pool */ -+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) -+ -+/* -+ * Miscellaneous configurable options -+ */ -+#define CONFIG_CMD_ECHO -+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -+#define CONFIG_SYS_GENERIC_BOARD -+ -+/* Boot Argument Buffer Size */ -+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -+ -+#define CONFIG_SYS_LOAD_ADDR 0x48000000 /* default load address */ -+ -+/* standalone support */ -+#define CONFIG_STANDALONE_LOAD_ADDR 0x48000000 -+ -+#define CONFIG_SYS_HZ 1000 -+ -+/* baudrate */ -+#define CONFIG_BAUDRATE 115200 -+ -+/* The stack sizes are set up in start.S using the settings below */ -+#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ -+ -+/* FLASH and environment organization */ -+ -+#define CONFIG_SYS_NO_FLASH -+ -+#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* 512 KiB */ -+#define CONFIG_IDENT_STRING " Allwinner Technology" -+ -+#define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */ -+#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -+ -+#ifdef CONFIG_SPL_FEL -+#define RUN_BOOT_RAM "run boot_ram;" -+#else -+#define RUN_BOOT_RAM "" -+#endif -+ -+#define CONFIG_BOOTCOMMAND \ -+ RUN_BOOT_RAM \ -+ "if run loadbootenv; then " \ -+ "echo Loaded environment from ${bootenv};" \ -+ "env import -t ${scriptaddr} ${filesize};" \ -+ "fi;" \ -+ "if test -n \\\"${uenvcmd}\\\"; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "if run loadbootscr; then "\ -+ "echo Jumping to ${bootscr};" \ -+ "source ${scriptaddr};" \ -+ "fi;" \ -+ "run autoboot;" \ -+ "" -+ -+#ifdef CONFIG_CMD_WATCHDOG -+#define RESET_WATCHDOG "watchdog 0" -+#else -+#define RESET_WATCHDOG "true" -+#endif -+ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ "bootm_size=0x10000000\0" \ -+ "console=ttyS0,115200\0" \ -+ "panicarg=panic=10\0" \ -+ "extraargs=\0" \ -+ "loglevel=8\0" \ -+ "scriptaddr=0x44000000\0" \ -+ "device=mmc\0" \ -+ "partition=0:1\0" \ -+ "setargs=" \ -+ "if test -z \\\\\"$root\\\\\"; then"\ -+ " if test \\\\\"$bootpath\\\\\" = \"/boot/\"; then"\ -+ " root=\"/dev/mmcblk0p1 rootwait\";"\ -+ " else" \ -+ " root=\"/dev/mmcblk0p2 rootwait\";"\ -+ " fi;"\ -+ " fi;"\ -+ " setenv bootargs console=${console} root=${root}" \ -+ " loglevel=${loglevel} ${panicarg} ${extraargs}" \ -+ "\0" \ -+ "kernel=uImage\0" \ -+ "bootenv=uEnv.txt\0" \ -+ "bootscr=boot.scr\0" \ -+ "script=script.bin\0" \ -+ "loadbootscr=" \ -+ "fatload $device $partition $scriptaddr ${bootscr}" \ -+ " || " \ -+ "ext2load $device $partition $scriptaddr boot/${bootscr}" \ -+ " ||" \ -+ "ext2load $device $partition $scriptaddr ${bootscr}" \ -+ "\0" \ -+ "loadbootenv=" \ -+ "fatload $device $partition $scriptaddr ${bootenv}" \ -+ " || " \ -+ "ext2load $device $partition $scriptaddr boot/${bootenv}" \ -+ " || " \ -+ "ext2load $device $partition $scriptaddr ${bootenv}" \ -+ "\0" \ -+ "loadkernel=" \ -+ "if "\ -+ "bootpath=/boot/" \ -+ " && " \ -+ "ext2load $device $partition 0x43000000 ${bootpath}${script}" \ -+ " && " \ -+ "ext2load $device $partition 0x48000000 ${bootpath}${kernel}" \ -+ ";then true; elif " \ -+ "bootpath=/" \ -+ " && " \ -+ "fatload $device $partition 0x43000000 ${script}" \ -+ " && " \ -+ "fatload $device $partition 0x48000000 ${kernel}" \ -+ ";then true; elif " \ -+ "bootpath=/" \ -+ " && " \ -+ "ext2load $device $partition 0x43000000 ${bootpath}${script}" \ -+ " && " \ -+ "ext2load $device $partition 0x48000000 ${bootpath}${kernel}" \ -+ ";then true; else "\ -+ "false" \ -+ ";fi" \ -+ "\0" \ -+ "autoboot=" \ -+ "run loadkernel" \ -+ " && " \ -+ "run setargs" \ -+ " && " \ -+ RESET_WATCHDOG \ -+ " && " \ -+ "bootm 0x48000000" \ -+ "\0" \ -+ "boot_ram=" \ -+ "saved_stdout=$stdout;setenv stdout nc;"\ -+ "if iminfo 0x41000000; then" \ -+ " " RESET_WATCHDOG ";"\ -+ " setenv stdout $saved_stdout;" \ -+ " source 0x41000000;" \ -+ "else" \ -+ " setenv stdout $saved_stdout;" \ -+ "fi" \ -+ "\0" \ -+ "" -+ -+#define CONFIG_SYS_BOOT_GET_CMDLINE -+ -+#include -+ -+#define CONFIG_FAT_WRITE /* enable write access */ -+ -+#define CONFIG_SPL_FRAMEWORK -+#define CONFIG_SPL_LIBCOMMON_SUPPORT -+#define CONFIG_SPL_SERIAL_SUPPORT -+#define CONFIG_SPL_LIBGENERIC_SUPPORT -+#define CONFIG_SPL_DISPLAY_PRINT -+ -+/* Falcon boot mode support */ -+/* Disabled by default on sun4i/sun7i. Many GCC versions produces a too -+ * large SPL for A10/A20 with this on. sun5i however accepts a much larger -+ * SPL -+ */ -+#if defined( CONFIG_SUN5I ) || defined ( CONFIG_SYS_THUMB_BUILD ) -+#define CONFIG_SPL_OS_BOOT -+#endif -+ -+#ifdef CONFIG_SPL_FEL -+ -+#define CONFIG_SPL -+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds" -+#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi" -+#define CONFIG_SPL_TEXT_BASE 0x2000 -+#define CONFIG_SPL_MAX_SIZE 0x4000 /* 16 KiB */ -+ -+#else /* CONFIG_SPL */ -+ -+#define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 -+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KiB */ -+ -+#define CONFIG_SPL_TEXT_BASE 0x20 /* sram start+header */ -+#ifdef CONFIG_SUN5I -+#define CONFIG_SPL_MAX_SIZE 0x75e0 /* 7748+ is used */ -+#else -+#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */ -+#endif -+ -+#define CONFIG_SPL_LIBDISK_SUPPORT -+#define CONFIG_SPL_MMC_SUPPORT -+ -+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" -+ -+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80 /* 40KiB */ -+#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ -+ -+#endif /* CONFIG_SPL */ -+/* end of 32 KiB in sram */ -+#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ -+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK -+#define CONFIG_SYS_SPL_MALLOC_START 0x4ff00000 -+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */ -+ -+#ifdef CONFIG_SPL_OS_BOOT -+#define CONFIG_CMD_SPL -+#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_0 + 0x100) -+#ifdef CONFIG_SPL_MMC_SUPPORT -+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 1344 -+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 256 -+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 1600 -+#endif -+#endif -+ -+#undef CONFIG_CMD_FPGA -+#undef CONFIG_CMD_NET -+#undef CONFIG_CMD_NFS -+ -+/* I2C */ -+#if !defined CONFIG_SUN6I && !defined CONFIG_SUN8I -+#define CONFIG_SPL_I2C_SUPPORT -+#endif -+/* No CONFIG_SYS_I2C as we use the non converted mvtwsi driver */ -+#define CONFIG_HARD_I2C -+#define CONFIG_SYS_I2C_SUNXI -+#define CONFIG_SYS_I2C_SPEED 400000 -+#define CONFIG_SYS_I2C_SLAVE 0x7f -+#define CONFIG_CMD_I2C -+ -+/* Watchdog */ -+#if 0 -+#define CONFIG_WATCHDOG /* automatic watchdog support */ -+#define CONFIG_CMD_WATCHDOG /* watchdog command setting the watchdog timeout */ -+#endif -+ -+/* GPIO */ -+#define CONFIG_SUNXI_GPIO -+#define CONFIG_CMD_GPIO -+ -+/* PMU */ -+#if !defined CONFIG_AXP152_POWER && !defined CONFIG_AXP221_POWER && !defined CONFIG_NO_AXP -+#define CONFIG_AXP209_POWER -+#endif -+#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER -+#define CONFIG_SPL_POWER_SUPPORT -+#endif -+ -+#ifdef CONFIG_STATUSLED -+#define STATUS_LED_BIT CONFIG_STATUSLED -+#endif -+#ifdef CONFIG_STATUSLED1 -+#define STATUS_LED_BIT1 CONFIG_STATUSLED1 -+#endif -+#ifdef CONFIG_STATUSLED2 -+#define STATUS_LED_BIT2 CONFIG_STATUSLED2 -+#endif -+#ifdef CONFIG_STATUSLED3 -+#define STATUS_LED_BIT3 CONFIG_STATUSLED3 -+#endif -+ -+#ifndef CONFIG_SPL_BUILD -+#ifdef STATUS_LED_BIT -+#define CONFIG_GPIO_LED -+#define CONFIG_STATUS_LED -+#ifndef STATUS_LED_BOOT -+#define STATUS_LED_BOOT 0 -+#endif -+#ifndef STATUS_LED_STATE -+#define STATUS_LED_STATE STATUS_LED_ON -+#define STATUS_LED_PERIOD 1 -+#endif -+#ifndef STATUS_LED_STATE1 -+#define STATUS_LED_STATE1 STATUS_LED_OFF -+#define STATUS_LED_PERIOD1 1 -+#endif -+#ifndef STATUS_LED_STATE2 -+#define STATUS_LED_STATE2 STATUS_LED_OFF -+#define STATUS_LED_PERIOD2 1 -+#endif -+#ifndef STATUS_LED_STATE3 -+#define STATUS_LED_STATE3 STATUS_LED_OFF -+#define STATUS_LED_PERIOD3 1 -+#endif -+#define CONFIG_BOARD_SPECIFIC_LED -+#define CONFIG_CMD_LED -+#endif -+#endif -+ -+/* Define this to have serial channel 1 (UART0) redirected to SD port */ -+/* #define CONFIG_UART0_PORT_F */ -+ -+#ifndef CONFIG_CONS_INDEX -+#define CONFIG_CONS_INDEX 1 /* UART0 */ -+#endif -+ -+/* Ethernet support */ -+#ifdef CONFIG_SUNXI_EMAC -+#define CONFIG_MII /* MII PHY management */ -+#endif -+ -+#ifdef CONFIG_SUNXI_GMAC -+#define CONFIG_DESIGNWARE_ETH /* GMAC can use designware driver */ -+#define CONFIG_DW_AUTONEG -+#define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ -+#define CONFIG_PHY_ADDR 1 -+#define CONFIG_MII /* MII PHY management */ -+#define CONFIG_PHYLIB -+#endif -+ -+#ifdef CONFIG_CMD_NET -+#define CONFIG_CMD_NFS -+#define CONFIG_CMD_DNS -+#define CONFIG_NETCONSOLE -+#define CONFIG_BOOTP_DNS2 -+#define CONFIG_BOOTP_SEND_HOSTNAME -+#endif -+ -+#if !defined CONFIG_ENV_IS_IN_MMC && \ -+ !defined CONFIG_ENV_IS_IN_NAND && \ -+ !defined CONFIG_ENV_IS_IN_FAT && \ -+ !defined CONFIG_ENV_IS_IN_SPI_FLASH -+#define CONFIG_ENV_IS_NOWHERE -+#endif -+ -+#define CONFIG_MISC_INIT_R -+ -+#ifndef CONFIG_SPL_BUILD -+#include -+#endif -+ -+#endif /* _SUNXI_COMMON_CONFIG_H */ -diff -ruN u-boot-2014.04/include/netdev.h u-boot-sunxi/include/netdev.h ---- u-boot-2014.04/include/netdev.h 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/include/netdev.h 2014-09-06 16:58:36.485953106 +0200 -@@ -79,7 +79,8 @@ - int skge_initialize(bd_t *bis); - int smc91111_initialize(u8 dev_num, int base_addr); - int smc911x_initialize(u8 dev_num, int base_addr); --int sunxi_wemac_initialize(bd_t *bis); -+int sunxi_emac_initialize(bd_t *bis); -+int sunxi_gmac_initialize(bd_t *bis); - int tsi108_eth_initialize(bd_t *bis); - int uec_standard_init(bd_t *bis); - int uli526x_initialize(bd_t *bis); -diff -ruN u-boot-2014.04/Makefile u-boot-sunxi/Makefile ---- u-boot-2014.04/Makefile 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/Makefile 2014-09-06 16:58:35.065953148 +0200 -@@ -870,6 +870,13 @@ - u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE - $(call if_changed,pad_cat) - -+ifneq ($(CONFIG_SUNXI),) -+OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ -+ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff -+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE -+ $(call if_changed,pad_cat) -+endif -+ - ifneq ($(CONFIG_TEGRA),) - OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE) - u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE -@@ -1081,6 +1088,9 @@ - spl/u-boot-spl: tools prepare - $(Q)$(MAKE) obj=spl -f $(srctree)/spl/Makefile all - -+spl/sunxi-spl.bin: spl/u-boot-spl -+ @: -+ - tpl/u-boot-tpl.bin: tools prepare - $(Q)$(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y - -diff -ruN u-boot-2014.04/mkconfig u-boot-sunxi/mkconfig ---- u-boot-2014.04/mkconfig 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/mkconfig 2014-09-06 16:58:36.509953105 +0200 -@@ -174,6 +174,7 @@ - echo "#define CONFIG_SYS_ARCH \"${arch}\"" >> config.h - echo "#define CONFIG_SYS_CPU \"${cpu}\"" >> config.h - echo "#define CONFIG_SYS_BOARD \"${board}\"" >> config.h -+echo "#define CONFIG_SYS_TARGET \"${BOARD_NAME}\"" >> config.h - - [ "${vendor}" ] && echo "#define CONFIG_SYS_VENDOR \"${vendor}\"" >> config.h - -diff -ruN u-boot-2014.04/snapshot.commit u-boot-sunxi/snapshot.commit ---- u-boot-2014.04/snapshot.commit 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/snapshot.commit 2014-09-06 16:58:36.521953105 +0200 -@@ -1 +1 @@ --dda0dbfc69f3d560c87f5be85f127ed862ea6721 Mon, 14 Apr 2014 15:19:24 -0400 -+$Format:%H %cD$ -diff -ruN u-boot-2014.04/spl/Makefile u-boot-sunxi/spl/Makefile ---- u-boot-2014.04/spl/Makefile 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/spl/Makefile 2014-09-06 16:58:36.521953105 +0200 -@@ -188,6 +188,12 @@ - ALL-y += $(obj)/$(BOARD)-spl.bin - endif - -+ifdef CONFIG_SUNXI -+ifndef CONFIG_SPL_FEL -+ALL-y += $(obj)/sunxi-spl.bin -+endif -+endif -+ - all: $(ALL-y) - - ifdef CONFIG_SAMSUNG -@@ -215,6 +221,13 @@ - LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE) - endif - -+ifdef CONFIG_SUNXI -+quiet_cmd_mksunxiboot = MKSUNXI $@ -+cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@ -+$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin -+ $(call if_changed,mksunxiboot) -+endif -+ - quiet_cmd_u-boot-spl = LD $@ - cmd_u-boot-spl = cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \ - $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \ -diff -ruN u-boot-2014.04/tools/.gitignore u-boot-sunxi/tools/.gitignore ---- u-boot-2014.04/tools/.gitignore 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/tools/.gitignore 2014-09-06 16:58:36.521953105 +0200 -@@ -9,6 +9,7 @@ - /mkexynosspl - /mpc86x_clk - /mxsboot -+/mksunxiboot - /ncb - /proftool - /relocate-rela -diff -ruN u-boot-2014.04/tools/Makefile u-boot-sunxi/tools/Makefile ---- u-boot-2014.04/tools/Makefile 2014-04-14 21:19:24.000000000 +0200 -+++ u-boot-sunxi/tools/Makefile 2014-09-06 16:58:36.521953105 +0200 -@@ -120,6 +120,8 @@ - hostprogs-$(CONFIG_MX28) += mxsboot$(SFX) - HOSTCFLAGS_mxsboot$(SFX).o := -pedantic - -+hostprogs-$(CONFIG_SUNXI) += mksunxiboot$(SFX) -+ - hostprogs-$(CONFIG_NETCONSOLE) += ncb$(SFX) - hostprogs-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX) - -diff -ruN u-boot-2014.04/tools/mksunxiboot.c u-boot-sunxi/tools/mksunxiboot.c ---- u-boot-2014.04/tools/mksunxiboot.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/tools/mksunxiboot.c 2014-09-06 16:58:36.529953105 +0200 -@@ -0,0 +1,140 @@ -+/* -+ * (C) Copyright 2007-2011 -+ * Allwinner Technology Co., Ltd. -+ * Tom Cubie -+ * -+ * a simple tool to generate bootable image for sunxi platform. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* boot head definition from sun4i boot code */ -+struct boot_file_head { -+ uint32_t b_instruction; /* one intruction jumping to real code */ -+ uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */ -+ uint32_t check_sum; /* generated by PC */ -+ uint32_t length; /* generated by PC */ -+ /* -+ * We use a simplified header, only filling in what is needed -+ * by the boot ROM. To be compatible with Allwinner tools we -+ * would need to implement the proper fields here instead of -+ * padding. -+ */ -+ uint8_t pad[12]; /* align to 32 bytes */ -+}; -+ -+#define BOOT0_MAGIC "eGON.BT0" -+#define STAMP_VALUE 0x5F0A6C39 -+ -+/* check sum functon from sun4i boot code */ -+int gen_check_sum(struct boot_file_head *head_p) -+{ -+ uint32_t length; -+ uint32_t *buf; -+ uint32_t loop; -+ uint32_t i; -+ uint32_t sum; -+ -+ length = head_p->length; -+ if ((length & 0x3) != 0) /* must 4-byte-aligned */ -+ return -1; -+ buf = (uint32_t *)head_p; -+ head_p->check_sum = STAMP_VALUE; /* fill stamp */ -+ loop = length >> 2; -+ -+ /* calculate the sum */ -+ for (i = 0, sum = 0; i < loop; i++) -+ sum += buf[i]; -+ -+ /* write back check sum */ -+ head_p->check_sum = sum; -+ -+ return 0; -+} -+ -+#define ALIGN(x, a) __ALIGN_MASK((x), (typeof(x))(a)-1) -+#define __ALIGN_MASK(x, mask) (((x)+(mask))&~(mask)) -+ -+#define SUN4I_SRAM_SIZE 0x7600 /* 0x7748+ is used by BROM */ -+#define SRAM_LOAD_MAX_SIZE (SUN4I_SRAM_SIZE - sizeof(struct boot_file_head)) -+#define BLOCK_SIZE 512 -+ -+struct boot_img { -+ struct boot_file_head header; -+ char code[SRAM_LOAD_MAX_SIZE]; -+ char pad[BLOCK_SIZE]; -+}; -+ -+int main(int argc, char *argv[]) -+{ -+ int fd_in, fd_out; -+ struct boot_img img; -+ unsigned file_size; -+ int count; -+ -+ if (argc < 2) { -+ printf("\tThis program makes an input bin file to sun4i " \ -+ "bootable image.\n" \ -+ "\tUsage: %s input_file out_putfile\n", argv[0]); -+ return EXIT_FAILURE; -+ } -+ -+ fd_in = open(argv[1], O_RDONLY); -+ if (fd_in < 0) { -+ perror("Open input file"); -+ return EXIT_FAILURE; -+ } -+ -+ memset(img.pad, 0, BLOCK_SIZE); -+ -+ /* get input file size */ -+ file_size = lseek(fd_in, 0, SEEK_END); -+ -+ if (file_size > SRAM_LOAD_MAX_SIZE) { -+ fprintf(stderr, "ERROR: File too large!\n"); -+ return EXIT_FAILURE; -+ } -+ -+ fd_out = open(argv[2], O_WRONLY | O_CREAT, 0666); -+ if (fd_out < 0) { -+ perror("Open output file"); -+ return EXIT_FAILURE; -+ } -+ -+ /* read file to buffer to calculate checksum */ -+ lseek(fd_in, 0, SEEK_SET); -+ count = read(fd_in, img.code, file_size); -+ if (count != file_size) { -+ perror("Reading input image"); -+ return EXIT_FAILURE; -+ } -+ -+ /* fill the header */ -+ img.header.b_instruction = /* b instruction */ -+ 0xEA000000 | /* jump to the first instr after the header */ -+ ((sizeof(struct boot_file_head) / sizeof(int) - 2) -+ & 0x00FFFFFF); -+ memcpy(img.header.magic, BOOT0_MAGIC, 8); /* no '0' termination */ -+ img.header.length = -+ ALIGN(file_size + sizeof(struct boot_file_head), BLOCK_SIZE); -+ gen_check_sum(&img.header); -+ -+ count = write(fd_out, &img, img.header.length); -+ if (count != img.header.length) { -+ perror("Writing output"); -+ return EXIT_FAILURE; -+ } -+ -+ close(fd_in); -+ close(fd_out); -+ -+ return EXIT_SUCCESS; -+} -diff -ruN u-boot-2014.04/tools/mksunxiboot.README u-boot-sunxi/tools/mksunxiboot.README ---- u-boot-2014.04/tools/mksunxiboot.README 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-sunxi/tools/mksunxiboot.README 2014-09-06 16:58:36.529953105 +0200 -@@ -0,0 +1,13 @@ -+This program make a arm binary file can be loaded by Allwinner A10 and related -+chips from storage media such as nand and mmc. -+ -+More information about A10 boot, please refer to -+http://rhombus-tech.net/allwinner_a10/a10_boot_process/ -+ -+To compile this program, just type make, you will get 'mksunxiboot'. -+ -+To use it, -+$./mksunxiboot u-boot.bin u-boot-mmc.bin -+then you can write it to a mmc card with dd. -+$sudo dd if=u-boot-mmc.bin of=/dev/sdb bs=1024 seek=8 -+then insert your mmc card to your A10 tablet, you can boot from mmc card. diff --git a/package/boot/uboot-sunxi/patches/002-add-linksprite-pcduino.diff b/package/boot/uboot-sunxi/patches/002-add-linksprite-pcduino.diff new file mode 100644 index 0000000000..904c815372 --- /dev/null +++ b/package/boot/uboot-sunxi/patches/002-add-linksprite-pcduino.diff @@ -0,0 +1,71 @@ +diff -ruN u-boot-2015.01-rc3.old/board/sunxi/dram_sun4i_408_1024_iow8.c u-boot-2015.01-rc3/board/sunxi/dram_sun4i_408_1024_iow8.c +--- u-boot-2015.01-rc3.old/board/sunxi/dram_sun4i_408_1024_iow8.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2015.01-rc3/board/sunxi/dram_sun4i_408_1024_iow8.c 2015-01-06 00:05:07.843497430 +0100 +@@ -0,0 +1,31 @@ ++/* this file is generated, don't edit it yourself */ ++ ++#include ++#include ++ ++static struct dram_para dram_para = { ++ .clock = 408, ++ .type = 3, ++ .rank_num = 1, ++ .density = 2048, ++ .io_width = 8, ++ .bus_width = 32, ++ .cas = 6, ++ .zq = 123, ++ .odt_en = 0, ++ .size = 1024, ++ .tpr0 = 0x30926692, ++ .tpr1 = 0x1090, ++ .tpr2 = 0x1a0c8, ++ .tpr3 = 0, ++ .tpr4 = 0, ++ .tpr5 = 0, ++ .emr1 = 0, ++ .emr2 = 0, ++ .emr3 = 0, ++}; ++ ++unsigned long sunxi_dram_init(void) ++{ ++ return dramc_init(&dram_para); ++} +diff -ruN u-boot-2015.01-rc3.old/board/sunxi/Kconfig u-boot-2015.01-rc3/board/sunxi/Kconfig +--- u-boot-2015.01-rc3.old/board/sunxi/Kconfig 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot-2015.01-rc3/board/sunxi/Kconfig 2015-01-06 00:06:04.218573211 +0100 +@@ -99,6 +99,10 @@ + bool "IPPO_Q8H_V5" + depends on MACH_SUN8I + ++config TARGET_PCDUINO ++ bool "PCDUINO" ++ depends on MACH_SUN4I ++ + config TARGET_PCDUINO3 + bool "PCDUINO3" + depends on MACH_SUN7I +diff -ruN u-boot-2015.01-rc3.old/board/sunxi/Makefile u-boot-2015.01-rc3/board/sunxi/Makefile +--- u-boot-2015.01-rc3.old/board/sunxi/Makefile 2014-12-08 22:35:08.000000000 +0100 ++++ u-boot-2015.01-rc3/board/sunxi/Makefile 2015-01-06 00:05:43.718909285 +0100 +@@ -31,6 +31,7 @@ + obj-$(CONFIG_TARGET_MELE_M3) += dram_sun7i_384_1024_iow16.o + obj-$(CONFIG_TARGET_MINI_X) += dram_sun4i_360_512.o + obj-$(CONFIG_TARGET_MINI_X_1GB) += dram_sun4i_360_1024_iow16.o ++obj-$(CONFIG_TARGET_PCDUINO) += dram_sun4i_408_1024_iow8.o + obj-$(CONFIG_TARGET_PCDUINO3) += dram_linksprite_pcduino3.o + obj-$(CONFIG_TARGET_QT840A) += dram_sun7i_384_512_busw16_iow16.o + obj-$(CONFIG_TARGET_R7DONGLE) += dram_r7dongle.o +diff -ruN u-boot-2015.01-rc3.old/configs/Linksprite_pcDuino_defconfig u-boot-2015.01-rc3/configs/Linksprite_pcDuino_defconfig +--- u-boot-2015.01-rc3.old/configs/Linksprite_pcDuino_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2015.01-rc3/configs/Linksprite_pcDuino_defconfig 2015-01-06 00:04:37.323997769 +0100 +@@ -0,0 +1,7 @@ ++CONFIG_SPL=y ++CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI" ++CONFIG_FDTFILE="sun4i-a10-pcduino.dtb" +++S:CONFIG_ARM=y +++S:CONFIG_ARCH_SUNXI=y +++S:CONFIG_MACH_SUN4I=y +++S:CONFIG_TARGET_PCDUINO=y diff --git a/package/boot/uboot-sunxi/patches/002-uboot-jwrdegoede-psci-support.patch b/package/boot/uboot-sunxi/patches/002-uboot-jwrdegoede-psci-support.patch deleted file mode 100644 index 65407aaa23..0000000000 --- a/package/boot/uboot-sunxi/patches/002-uboot-jwrdegoede-psci-support.patch +++ /dev/null @@ -1,1495 +0,0 @@ -From 86f31982ac62e80fe586cad2e0a49a7b22e3d4ee Mon Sep 17 00:00:00 2001 -From: Marc Zyngier -Date: Sat, 7 Dec 2013 11:19:07 +0000 -Subject: [PATCH] ARM: HYP/non-sec: move switch to non-sec to the last boot - phase - -Having the switch to non-secure in the "prep" phase is causing -all kind of troubles, as that stage can be called multiple times. - -Instead, move the switch to non-secure to the last possible phase, -when there is no turning back anymore. - -Signed-off-by: Marc Zyngier ---- - arch/arm/lib/bootm.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c -index 47ee070..10634a4 100644 ---- a/arch/arm/lib/bootm.c -+++ b/arch/arm/lib/bootm.c -@@ -242,7 +242,6 @@ static void boot_prep_linux(bootm_headers_t *images) - printf("FDT and ATAGS support not compiled in - hanging\n"); - hang(); - } -- do_nonsec_virt_switch(); - } - - /* Subcommand: GO */ -@@ -287,8 +286,10 @@ static void boot_jump_linux(bootm_headers_t *images, int flag) - else - r2 = gd->bd->bi_boot_params; - -- if (!fake) -+ if (!fake) { -+ do_nonsec_virt_switch(); - kernel_entry(0, machid, r2); -+ } - #endif - } - -From c26d288f6cbc6d53219001d42476f314c403257b Mon Sep 17 00:00:00 2001 -From: Marc Zyngier -Date: Sat, 7 Dec 2013 11:19:08 +0000 -Subject: [PATCH] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1 - -A CP15 instruction execution can be reordered, requiring an -isb to be sure it is executed in program order. - -Signed-off-by: Marc Zyngier ---- - arch/arm/cpu/armv7/nonsec_virt.S | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S -index 6367e09..12de5c2 100644 ---- a/arch/arm/cpu/armv7/nonsec_virt.S -+++ b/arch/arm/cpu/armv7/nonsec_virt.S -@@ -46,6 +46,7 @@ _secure_monitor: - #endif - - mcr p15, 0, r1, c1, c1, 0 @ write SCR (with NS bit set) -+ isb - - #ifdef CONFIG_ARMV7_VIRT - mrceq p15, 0, r0, c12, c0, 1 @ get MVBAR value -From 06feeea3c84cc58ff3d5c19f6a430886495f86ce Mon Sep 17 00:00:00 2001 -From: Marc Zyngier -Date: Sat, 7 Dec 2013 11:19:09 +0000 -Subject: [PATCH] ARM: non-sec: reset CNTVOFF to zero - -Before switching to non-secure, make sure that CNTVOFF is set -to zero on all CPUs. Otherwise, kernel running in non-secure -without HYP enabled (hence using virtual timers) may observe -timers that are not synchronized, effectively seeing time -going backward... - -Signed-off-by: Marc Zyngier ---- - arch/arm/cpu/armv7/nonsec_virt.S | 9 ++++++++- - 1 file changed, 8 insertions(+), 1 deletion(-) - -diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S -index 12de5c2..b5c946f 100644 ---- a/arch/arm/cpu/armv7/nonsec_virt.S -+++ b/arch/arm/cpu/armv7/nonsec_virt.S -@@ -38,10 +38,10 @@ _secure_monitor: - bic r1, r1, #0x4e @ clear IRQ, FIQ, EA, nET bits - orr r1, r1, #0x31 @ enable NS, AW, FW bits - --#ifdef CONFIG_ARMV7_VIRT - mrc p15, 0, r0, c0, c1, 1 @ read ID_PFR1 - and r0, r0, #CPUID_ARM_VIRT_MASK @ mask virtualization bits - cmp r0, #(1 << CPUID_ARM_VIRT_SHIFT) -+#ifdef CONFIG_ARMV7_VIRT - orreq r1, r1, #0x100 @ allow HVC instruction - #endif - -@@ -52,7 +52,14 @@ _secure_monitor: - mrceq p15, 0, r0, c12, c0, 1 @ get MVBAR value - mcreq p15, 4, r0, c12, c0, 0 @ write HVBAR - #endif -+ bne 1f - -+ @ Reset CNTVOFF to 0 before leaving monitor mode -+ mrc p15, 0, r0, c0, c1, 1 @ read ID_PFR1 -+ ands r0, r0, #CPUID_ARM_GENTIMER_MASK @ test arch timer bits -+ movne r0, #0 -+ mcrrne p15, 4, r0, r0, c14 @ Reset CNTVOFF to zero -+1: - movs pc, lr @ return to non-secure SVC - - _hyp_trap: -From 054bcf5147ff5a20298bce5b3bdfbf3e1c797594 Mon Sep 17 00:00:00 2001 -From: Marc Zyngier -Date: Sat, 7 Dec 2013 11:19:10 +0000 -Subject: [PATCH] ARM: add missing HYP mode constant - -In order to be able to use the various mode constants (far more -readable than random hex values), add the missing HYP and A -values. - -Also update arm/lib/interrupts.c to display HYP instead of an -unknown value. - -Signed-off-by: Marc Zyngier ---- - arch/arm/include/asm/proc-armv/ptrace.h | 2 ++ - arch/arm/lib/interrupts.c | 2 +- - 2 files changed, 3 insertions(+), 1 deletion(-) - -diff --git a/arch/arm/include/asm/proc-armv/ptrace.h b/arch/arm/include/asm/proc-armv/ptrace.h -index 21aef58..71df5a9 100644 ---- a/arch/arm/include/asm/proc-armv/ptrace.h -+++ b/arch/arm/include/asm/proc-armv/ptrace.h -@@ -38,12 +38,14 @@ struct pt_regs { - #define IRQ_MODE 0x12 - #define SVC_MODE 0x13 - #define ABT_MODE 0x17 -+#define HYP_MODE 0x1a - #define UND_MODE 0x1b - #define SYSTEM_MODE 0x1f - #define MODE_MASK 0x1f - #define T_BIT 0x20 - #define F_BIT 0x40 - #define I_BIT 0x80 -+#define A_BIT 0x100 - #define CC_V_BIT (1 << 28) - #define CC_C_BIT (1 << 29) - #define CC_Z_BIT (1 << 30) -diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c -index 758b013..f6b7c03 100644 ---- a/arch/arm/lib/interrupts.c -+++ b/arch/arm/lib/interrupts.c -@@ -103,7 +103,7 @@ void show_regs (struct pt_regs *regs) - "UK12_26", "UK13_26", "UK14_26", "UK15_26", - "USER_32", "FIQ_32", "IRQ_32", "SVC_32", - "UK4_32", "UK5_32", "UK6_32", "ABT_32", -- "UK8_32", "UK9_32", "UK10_32", "UND_32", -+ "UK8_32", "UK9_32", "HYP_32", "UND_32", - "UK12_32", "UK13_32", "UK14_32", "SYS_32", - }; - -From 213a8d9b7e613210d3c7d8b99c95b454ad0527d8 Mon Sep 17 00:00:00 2001 -From: Marc Zyngier -Date: Sat, 7 Dec 2013 11:19:11 +0000 -Subject: [PATCH] ARM: HYP/non-sec: add separate section for secure code - -In anticipation of refactoring the HYP/non-secure code to run -from secure RAM, add a new linker section that will contain that -code. - -Nothing is using it just yet. - -Signed-off-by: Marc Zyngier ---- - arch/arm/config.mk | 2 +- - arch/arm/cpu/u-boot.lds | 30 ++++++++++++++++++++++++++++++ - arch/arm/lib/sections.c | 2 ++ - 3 files changed, 33 insertions(+), 1 deletion(-) - -diff --git a/arch/arm/config.mk b/arch/arm/config.mk -index 66ecc2e..2bdfca5 100644 ---- a/arch/arm/config.mk -+++ b/arch/arm/config.mk -@@ -113,7 +113,7 @@ endif - ifdef CONFIG_ARM64 - OBJCOPYFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rela.dyn - else --OBJCOPYFLAGS += -j .text -j .rodata -j .hash -j .data -j .got.plt -j .u_boot_list -j .rel.dyn -+OBJCOPYFLAGS += -j .text -j .secure_text -j .rodata -j .hash -j .data -j .got.plt -j .u_boot_list -j .rel.dyn - endif - - ifneq ($(CONFIG_IMX_CONFIG),) -diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds -index 33c1f99..f45885d 100644 ---- a/arch/arm/cpu/u-boot.lds -+++ b/arch/arm/cpu/u-boot.lds -@@ -7,6 +7,8 @@ - * SPDX-License-Identifier: GPL-2.0+ - */ - -+#include -+ - OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") - OUTPUT_ARCH(arm) - ENTRY(_start) -@@ -22,6 +24,34 @@ SECTIONS - *(.text*) - } - -+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT) || defined(CONFIG_ARMV7_PSCI) -+ -+#ifndef CONFIG_ARMV7_SECURE_BASE -+#define CONFIG_ARMV7_SECURE_BASE -+#endif -+ -+ .__secure_start : { -+ . = ALIGN(0x1000); -+ *(.__secure_start) -+ } -+ -+ .secure_text CONFIG_ARMV7_SECURE_BASE : -+ AT(ADDR(.__secure_start) + SIZEOF(.__secure_start)) -+ { -+ *(._secure.text) -+ } -+ -+ . = LOADADDR(.__secure_start) + -+ SIZEOF(.__secure_start) + -+ SIZEOF(.secure_text); -+ -+ __secure_end_lma = .; -+ .__secure_end : AT(__secure_end_lma) { -+ *(.__secure_end) -+ LONG(0x1d1071c); /* Must output something to reset LMA */ -+ } -+#endif -+ - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - -diff --git a/arch/arm/lib/sections.c b/arch/arm/lib/sections.c -index 5b30bcb..a1205c3 100644 ---- a/arch/arm/lib/sections.c -+++ b/arch/arm/lib/sections.c -@@ -25,4 +25,6 @@ char __image_copy_start[0] __attribute__((section(".__image_copy_start"))); - char __image_copy_end[0] __attribute__((section(".__image_copy_end"))); - char __rel_dyn_start[0] __attribute__((section(".__rel_dyn_start"))); - char __rel_dyn_end[0] __attribute__((section(".__rel_dyn_end"))); -+char __secure_start[0] __attribute__((section(".__secure_start"))); -+char __secure_end[0] __attribute__((section(".__secure_end"))); - char _end[0] __attribute__((section(".__end"))); -From d7ebd8f57e84ea92ef0cf55080f0acec9c6d1ace Mon Sep 17 00:00:00 2001 -From: Marc Zyngier -Date: Sat, 7 Dec 2013 11:19:12 +0000 -Subject: [PATCH] ARM: HYP/non-sec: allow relocation to secure RAM - -The current non-sec switching code suffers from one major issue: -it cannot run in secure RAM, as a large part of u-boot still needs -to be run while we're switched to non-secure. - -This patch reworks the whole HYP/non-secure strategy by: -- making sure the secure code is the *last* thing u-boot executes - before entering the payload -- performing an exception return from secure mode directly into - the payload -- allowing the code to be dynamically relocated to secure RAM - before switching to non-secure. - -This involves quite a bit of horrible code, specially as u-boot -relocation is quite primitive. - -Signed-off-by: Marc Zyngier ---- - arch/arm/cpu/armv7/nonsec_virt.S | 161 +++++++++++++++++++-------------------- - arch/arm/cpu/armv7/virt-v7.c | 59 +++++--------- - arch/arm/include/asm/armv7.h | 10 ++- - arch/arm/include/asm/secure.h | 26 +++++++ - arch/arm/lib/bootm.c | 22 +++--- - 5 files changed, 138 insertions(+), 140 deletions(-) - create mode 100644 arch/arm/include/asm/secure.h - -diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S -index b5c946f..2a43e3c 100644 ---- a/arch/arm/cpu/armv7/nonsec_virt.S -+++ b/arch/arm/cpu/armv7/nonsec_virt.S -@@ -10,10 +10,13 @@ - #include - #include - #include -+#include - - .arch_extension sec - .arch_extension virt - -+ .pushsection ._secure.text, "ax" -+ - .align 5 - /* the vector table for secure state and HYP mode */ - _monitor_vectors: -@@ -22,51 +25,86 @@ _monitor_vectors: - adr pc, _secure_monitor - .word 0 - .word 0 -- adr pc, _hyp_trap -+ .word 0 - .word 0 - .word 0 - -+.macro is_cpu_virt_capable tmp -+ mrc p15, 0, \tmp, c0, c1, 1 @ read ID_PFR1 -+ and \tmp, \tmp, #CPUID_ARM_VIRT_MASK @ mask virtualization bits -+ cmp \tmp, #(1 << CPUID_ARM_VIRT_SHIFT) -+.endm -+ - /* - * secure monitor handler - * U-boot calls this "software interrupt" in start.S - * This is executed on a "smc" instruction, we use a "smc #0" to switch - * to non-secure state. -- * We use only r0 and r1 here, due to constraints in the caller. -+ * r0, r1, r2: passed to the callee -+ * ip: target PC - */ - _secure_monitor: -- mrc p15, 0, r1, c1, c1, 0 @ read SCR -- bic r1, r1, #0x4e @ clear IRQ, FIQ, EA, nET bits -- orr r1, r1, #0x31 @ enable NS, AW, FW bits -+ mrc p15, 0, r5, c1, c1, 0 @ read SCR -+ bic r5, r5, #0x4e @ clear IRQ, FIQ, EA, nET bits -+ orr r5, r5, #0x31 @ enable NS, AW, FW bits - -- mrc p15, 0, r0, c0, c1, 1 @ read ID_PFR1 -- and r0, r0, #CPUID_ARM_VIRT_MASK @ mask virtualization bits -- cmp r0, #(1 << CPUID_ARM_VIRT_SHIFT) -+ mov r6, #SVC_MODE @ default mode is SVC -+ is_cpu_virt_capable r4 - #ifdef CONFIG_ARMV7_VIRT -- orreq r1, r1, #0x100 @ allow HVC instruction -+ orreq r5, r5, #0x100 @ allow HVC instruction -+ moveq r6, #HYP_MODE @ Enter the kernel as HYP - #endif - -- mcr p15, 0, r1, c1, c1, 0 @ write SCR (with NS bit set) -+ mcr p15, 0, r5, c1, c1, 0 @ write SCR (with NS bit set) - isb - --#ifdef CONFIG_ARMV7_VIRT -- mrceq p15, 0, r0, c12, c0, 1 @ get MVBAR value -- mcreq p15, 4, r0, c12, c0, 0 @ write HVBAR --#endif - bne 1f - - @ Reset CNTVOFF to 0 before leaving monitor mode -- mrc p15, 0, r0, c0, c1, 1 @ read ID_PFR1 -- ands r0, r0, #CPUID_ARM_GENTIMER_MASK @ test arch timer bits -- movne r0, #0 -- mcrrne p15, 4, r0, r0, c14 @ Reset CNTVOFF to zero -+ mrc p15, 0, r4, c0, c1, 1 @ read ID_PFR1 -+ ands r4, r4, #CPUID_ARM_GENTIMER_MASK @ test arch timer bits -+ movne r4, #0 -+ mcrrne p15, 4, r4, r4, c14 @ Reset CNTVOFF to zero - 1: -- movs pc, lr @ return to non-secure SVC -- --_hyp_trap: -- mrs lr, elr_hyp @ for older asm: .byte 0x00, 0xe3, 0x0e, 0xe1 -- mov pc, lr @ do no switch modes, but -- @ return to caller -- -+ mov lr, ip -+ mov ip, #(F_BIT | I_BIT | A_BIT) @ Set A, I and F -+ tst lr, #1 @ Check for Thumb PC -+ orrne ip, ip, #T_BIT @ Set T if Thumb -+ orr ip, ip, r6 @ Slot target mode in -+ msr spsr_cxfs, ip @ Set full SPSR -+ movs pc, lr @ ERET to non-secure -+ -+ENTRY(_do_nonsec_entry) -+ mov ip, r0 -+ mov r0, r1 -+ mov r1, r2 -+ mov r2, r3 -+ smc #0 -+ENDPROC(_do_nonsec_entry) -+ -+.macro get_cbar_addr addr -+#ifdef CONFIG_ARM_GIC_BASE_ADDRESS -+ ldr \addr, =CONFIG_ARM_GIC_BASE_ADDRESS -+#else -+ mrc p15, 4, \addr, c15, c0, 0 @ read CBAR -+ bfc \addr, #0, #15 @ clear reserved bits -+#endif -+.endm -+ -+.macro get_gicd_addr addr -+ get_cbar_addr \addr -+ add \addr, \addr, #GIC_DIST_OFFSET @ GIC dist i/f offset -+.endm -+ -+.macro get_gicc_addr addr, tmp -+ get_cbar_addr \addr -+ is_cpu_virt_capable \tmp -+ movne \tmp, #GIC_CPU_OFFSET_A9 @ GIC CPU offset for A9 -+ moveq \tmp, #GIC_CPU_OFFSET_A15 @ GIC CPU offset for A15/A7 -+ add \addr, \addr, \tmp -+.endm -+ -+#ifndef CONFIG_ARMV7_PSCI - /* - * Secondary CPUs start here and call the code for the core specific parts - * of the non-secure and HYP mode transition. The GIC distributor specific -@@ -74,31 +112,21 @@ _hyp_trap: - * Then they go back to wfi and wait to be woken up by the kernel again. - */ - ENTRY(_smp_pen) -- mrs r0, cpsr -- orr r0, r0, #0xc0 -- msr cpsr, r0 @ disable interrupts -- ldr r1, =_start -- mcr p15, 0, r1, c12, c0, 0 @ set VBAR -+ cpsid i -+ cpsid f - - bl _nonsec_init -- mov r12, r0 @ save GICC address --#ifdef CONFIG_ARMV7_VIRT -- bl _switch_to_hyp --#endif -- -- ldr r1, [r12, #GICC_IAR] @ acknowledge IPI -- str r1, [r12, #GICC_EOIR] @ signal end of interrupt - - adr r0, _smp_pen @ do not use this address again - b smp_waitloop @ wait for IPIs, board specific - ENDPROC(_smp_pen) -+#endif - - /* - * Switch a core to non-secure state. - * - * 1. initialize the GIC per-core interface - * 2. allow coprocessor access in non-secure modes -- * 3. switch the cpu mode (by calling "smc #0") - * - * Called from smp_pen by secondary cores and directly by the BSP. - * Do not assume that the stack is available and only use registers -@@ -108,38 +136,23 @@ ENDPROC(_smp_pen) - * though, but we check this in C before calling this function. - */ - ENTRY(_nonsec_init) --#ifdef CONFIG_ARM_GIC_BASE_ADDRESS -- ldr r2, =CONFIG_ARM_GIC_BASE_ADDRESS --#else -- mrc p15, 4, r2, c15, c0, 0 @ read CBAR -- bfc r2, #0, #15 @ clear reserved bits --#endif -- add r3, r2, #GIC_DIST_OFFSET @ GIC dist i/f offset -+ get_gicd_addr r3 -+ - mvn r1, #0 @ all bits to 1 - str r1, [r3, #GICD_IGROUPRn] @ allow private interrupts - -- mrc p15, 0, r0, c0, c0, 0 @ read MIDR -- ldr r1, =MIDR_PRIMARY_PART_MASK -- and r0, r0, r1 @ mask out variant and revision -+ get_gicc_addr r3, r1 - -- ldr r1, =MIDR_CORTEX_A7_R0P0 & MIDR_PRIMARY_PART_MASK -- cmp r0, r1 @ check for Cortex-A7 -- -- ldr r1, =MIDR_CORTEX_A15_R0P0 & MIDR_PRIMARY_PART_MASK -- cmpne r0, r1 @ check for Cortex-A15 -- -- movne r1, #GIC_CPU_OFFSET_A9 @ GIC CPU offset for A9 -- moveq r1, #GIC_CPU_OFFSET_A15 @ GIC CPU offset for A15/A7 -- add r3, r2, r1 @ r3 = GIC CPU i/f addr -- -- mov r1, #1 @ set GICC_CTLR[enable] -+ mov r1, #3 @ Enable both groups - str r1, [r3, #GICC_CTLR] @ and clear all other bits - mov r1, #0xff - str r1, [r3, #GICC_PMR] @ set priority mask register - -+ mrc p15, 0, r0, c1, c1, 2 - movw r1, #0x3fff -- movt r1, #0x0006 -- mcr p15, 0, r1, c1, c1, 2 @ NSACR = all copros to non-sec -+ movt r1, #0x0004 -+ orr r0, r0, r1 -+ mcr p15, 0, r0, c1, c1, 2 @ NSACR = all copros to non-sec - - /* The CNTFRQ register of the generic timer needs to be - * programmed in secure state. Some primary bootloaders / firmware -@@ -157,21 +170,9 @@ ENTRY(_nonsec_init) - - adr r1, _monitor_vectors - mcr p15, 0, r1, c12, c0, 1 @ set MVBAR to secure vectors -- -- mrc p15, 0, ip, c12, c0, 0 @ save secure copy of VBAR -- - isb -- smc #0 @ call into MONITOR mode -- -- mcr p15, 0, ip, c12, c0, 0 @ write non-secure copy of VBAR -- -- mov r1, #1 -- str r1, [r3, #GICC_CTLR] @ enable non-secure CPU i/f -- add r2, r2, #GIC_DIST_OFFSET -- str r1, [r2, #GICD_CTLR] @ allow private interrupts - - mov r0, r3 @ return GICC address -- - bx lr - ENDPROC(_nonsec_init) - -@@ -183,18 +184,10 @@ ENTRY(smp_waitloop) - ldr r1, [r1] - cmp r0, r1 @ make sure we dont execute this code - beq smp_waitloop @ again (due to a spurious wakeup) -- mov pc, r1 -+ mov r0, r1 -+ b _do_nonsec_entry - ENDPROC(smp_waitloop) - .weak smp_waitloop - #endif - --ENTRY(_switch_to_hyp) -- mov r0, lr -- mov r1, sp @ save SVC copy of LR and SP -- isb -- hvc #0 @ for older asm: .byte 0x70, 0x00, 0x40, 0xe1 -- mov sp, r1 -- mov lr, r0 @ restore SVC copy of LR and SP -- -- bx lr --ENDPROC(_switch_to_hyp) -+ .popsection -diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c -index 2cd604f..6500030 100644 ---- a/arch/arm/cpu/armv7/virt-v7.c -+++ b/arch/arm/cpu/armv7/virt-v7.c -@@ -13,17 +13,10 @@ - #include - #include - #include -+#include - - unsigned long gic_dist_addr; - --static unsigned int read_cpsr(void) --{ -- unsigned int reg; -- -- asm volatile ("mrs %0, cpsr\n" : "=r" (reg)); -- return reg; --} -- - static unsigned int read_id_pfr1(void) - { - unsigned int reg; -@@ -72,6 +65,18 @@ static unsigned long get_gicd_base_address(void) - #endif - } - -+static void relocate_secure_section(void) -+{ -+#ifdef CONFIG_ARMV7_SECURE_BASE -+ size_t sz = __secure_end - __secure_start; -+ -+ memcpy((void *)CONFIG_ARMV7_SECURE_BASE, __secure_start, sz); -+ flush_dcache_range(CONFIG_ARMV7_SECURE_BASE, -+ CONFIG_ARMV7_SECURE_BASE + sz + 1); -+ invalidate_icache_all(); -+#endif -+} -+ - static void kick_secondary_cpus_gic(unsigned long gicdaddr) - { - /* kick all CPUs (except this one) by writing to GICD_SGIR */ -@@ -83,35 +88,7 @@ void __weak smp_kick_all_cpus(void) - kick_secondary_cpus_gic(gic_dist_addr); - } - --int armv7_switch_hyp(void) --{ -- unsigned int reg; -- -- /* check whether we are in HYP mode already */ -- if ((read_cpsr() & 0x1f) == 0x1a) { -- debug("CPU already in HYP mode\n"); -- return 0; -- } -- -- /* check whether the CPU supports the virtualization extensions */ -- reg = read_id_pfr1(); -- if ((reg & CPUID_ARM_VIRT_MASK) != 1 << CPUID_ARM_VIRT_SHIFT) { -- printf("HYP mode: Virtualization extensions not implemented.\n"); -- return -1; -- } -- -- /* call the HYP switching code on this CPU also */ -- _switch_to_hyp(); -- -- if ((read_cpsr() & 0x1F) != 0x1a) { -- printf("HYP mode: switch not successful.\n"); -- return -1; -- } -- -- return 0; --} -- --int armv7_switch_nonsec(void) -+int armv7_init_nonsec(void) - { - unsigned int reg; - unsigned itlinesnr, i; -@@ -147,11 +124,13 @@ int armv7_switch_nonsec(void) - for (i = 1; i <= itlinesnr; i++) - writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i); - -- smp_set_core_boot_addr((unsigned long)_smp_pen, -1); -+#ifndef CONFIG_ARMV7_PSCI -+ smp_set_core_boot_addr((unsigned long)secure_ram_addr(_smp_pen), -1); - smp_kick_all_cpus(); -+#endif - - /* call the non-sec switching code on this CPU also */ -- _nonsec_init(); -- -+ relocate_secure_section(); -+ secure_ram_addr(_nonsec_init)(); - return 0; - } -diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h -index 395444e..11476dd 100644 ---- a/arch/arm/include/asm/armv7.h -+++ b/arch/arm/include/asm/armv7.h -@@ -78,13 +78,17 @@ void v7_outer_cache_inval_range(u32 start, u32 end); - - #if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT) - --int armv7_switch_nonsec(void); --int armv7_switch_hyp(void); -+int armv7_init_nonsec(void); - - /* defined in assembly file */ - unsigned int _nonsec_init(void); -+void _do_nonsec_entry(void *target_pc, unsigned long r0, -+ unsigned long r1, unsigned long r2); - void _smp_pen(void); --void _switch_to_hyp(void); -+ -+extern char __secure_start[]; -+extern char __secure_end[]; -+ - #endif /* CONFIG_ARMV7_NONSEC || CONFIG_ARMV7_VIRT */ - - #endif /* ! __ASSEMBLY__ */ -diff --git a/arch/arm/include/asm/secure.h b/arch/arm/include/asm/secure.h -new file mode 100644 -index 0000000..effdb18 ---- /dev/null -+++ b/arch/arm/include/asm/secure.h -@@ -0,0 +1,26 @@ -+#ifndef __ASM_SECURE_H -+#define __ASM_SECURE_H -+ -+#include -+ -+#ifdef CONFIG_ARMV7_SECURE_BASE -+/* -+ * Warning, horror ahead. -+ * -+ * The target code lives in our "secure ram", but u-boot doesn't know -+ * that, and has blindly added reloc_off to every relocation -+ * entry. Gahh. Do the opposite conversion. This hack also prevents -+ * GCC from generating code veeners, which u-boot doesn't relocate at -+ * all... -+ */ -+#define secure_ram_addr(_fn) ({ \ -+ DECLARE_GLOBAL_DATA_PTR; \ -+ void *__fn = _fn; \ -+ typeof(_fn) *__tmp = (__fn - gd->reloc_off); \ -+ __tmp; \ -+ }) -+#else -+#define secure_ram_addr(_fn) (_fn) -+#endif -+ -+#endif -diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c -index 10634a4..61aa14e 100644 ---- a/arch/arm/lib/bootm.c -+++ b/arch/arm/lib/bootm.c -@@ -20,6 +20,7 @@ - #include - #include - #include -+#include - #include - - #if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT) -@@ -184,27 +185,17 @@ static void setup_end_tag(bd_t *bd) - - __weak void setup_board_tags(struct tag **in_params) {} - -+#ifdef CONFIG_ARM64 - static void do_nonsec_virt_switch(void) - { --#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT) -- if (armv7_switch_nonsec() == 0) --#ifdef CONFIG_ARMV7_VIRT -- if (armv7_switch_hyp() == 0) -- debug("entered HYP mode\n"); --#else -- debug("entered non-secure state\n"); --#endif --#endif -- --#ifdef CONFIG_ARM64 - smp_kick_all_cpus(); - flush_dcache_all(); /* flush cache before swtiching to EL2 */ - armv8_switch_to_el2(); - #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 - armv8_switch_to_el1(); - #endif --#endif - } -+#endif - - /* Subcommand: PREP */ - static void boot_prep_linux(bootm_headers_t *images) -@@ -287,8 +278,13 @@ static void boot_jump_linux(bootm_headers_t *images, int flag) - r2 = gd->bd->bi_boot_params; - - if (!fake) { -- do_nonsec_virt_switch(); -+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT) -+ armv7_init_nonsec(); -+ secure_ram_addr(_do_nonsec_entry)(kernel_entry, -+ 0, machid, r2); -+#else - kernel_entry(0, machid, r2); -+#endif - } - #endif - } -From 8ea1554da4a6e556d3213a77cf59daa1c154bdb5 Mon Sep 17 00:00:00 2001 -From: Marc Zyngier -Date: Sat, 7 Dec 2013 11:19:13 +0000 -Subject: [PATCH] ARM: HYP/non-sec: add generic ARMv7 PSCI code - -Implement core support for PSCI. As this is generic code, it doesn't -implement anything really useful (all the functions are returning -Not Implemented). - -Signed-off-by: Marc Zyngier ---- - arch/arm/cpu/armv7/Makefile | 4 ++ - arch/arm/cpu/armv7/psci.S | 105 ++++++++++++++++++++++++++++++++++++++++++++ - arch/arm/include/asm/psci.h | 35 +++++++++++++++ - 3 files changed, 144 insertions(+) - create mode 100644 arch/arm/cpu/armv7/psci.S - create mode 100644 arch/arm/include/asm/psci.h - -diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile -index 6f17771..0cf5c45 100644 ---- a/arch/arm/cpu/armv7/Makefile -+++ b/arch/arm/cpu/armv7/Makefile -@@ -24,6 +24,10 @@ obj-y += nonsec_virt.o - obj-y += virt-v7.o - endif - -+ifneq ($(CONFIG_ARMV7_PSCI),) -+obj-y += psci.o -+endif -+ - obj-$(CONFIG_KONA) += kona-common/ - obj-$(CONFIG_OMAP_COMMON) += omap-common/ - obj-$(CONFIG_TEGRA) += tegra-common/ -diff --git a/arch/arm/cpu/armv7/psci.S b/arch/arm/cpu/armv7/psci.S -new file mode 100644 -index 0000000..a9341e0 ---- /dev/null -+++ b/arch/arm/cpu/armv7/psci.S -@@ -0,0 +1,105 @@ -+/* -+ * Copyright (C) 2013 - ARM Ltd -+ * Author: Marc Zyngier -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . -+ */ -+ -+#include -+#include -+#include -+ -+ .pushsection ._secure.text, "ax" -+ -+ .arch_extension sec -+ -+ .align 5 -+ .globl _psci_vectors -+_psci_vectors: -+ b default_psci_vector @ reset -+ b default_psci_vector @ undef -+ b _smc_psci @ smc -+ b default_psci_vector @ pabort -+ b default_psci_vector @ dabort -+ b default_psci_vector @ hyp -+ b default_psci_vector @ irq -+ b psci_fiq_enter @ fiq -+ -+ENTRY(psci_fiq_enter) -+ movs pc, lr -+ENDPROC(psci_fiq_enter) -+.weak psci_fiq_enter -+ -+ENTRY(default_psci_vector) -+ movs pc, lr -+ENDPROC(default_psci_vector) -+.weak default_psci_vector -+ -+ENTRY(psci_cpu_suspend) -+ENTRY(psci_cpu_off) -+ENTRY(psci_cpu_on) -+ENTRY(psci_migrate) -+ mov r0, #ARM_PSCI_RET_NI @ Return -1 (Not Implemented) -+ mov pc, lr -+ENDPROC(psci_migrate) -+ENDPROC(psci_cpu_on) -+ENDPROC(psci_cpu_off) -+ENDPROC(psci_cpu_suspend) -+.weak psci_cpu_suspend -+.weak psci_cpu_off -+.weak psci_cpu_on -+.weak psci_migrate -+ -+_psci_table: -+ .word ARM_PSCI_FN_CPU_SUSPEND -+ .word psci_cpu_suspend -+ .word ARM_PSCI_FN_CPU_OFF -+ .word psci_cpu_off -+ .word ARM_PSCI_FN_CPU_ON -+ .word psci_cpu_on -+ .word ARM_PSCI_FN_MIGRATE -+ .word psci_migrate -+ .word 0 -+ .word 0 -+ -+_smc_psci: -+ push {r3-r7,lr} -+ -+ @ Switch to secure -+ mrc p15, 0, r7, c1, c1, 0 -+ bic r4, r7, #1 -+ mcr p15, 0, r4, c1, c1, 0 -+ isb -+ -+ adr r4, _psci_table -+1: ldr r5, [r4] @ Load PSCI function ID -+ ldr r6, [r4, #4] @ Load target PC -+ cmp r5, #0 @ If reach the end, bail out -+ mvneq r0, #0 @ Return -1 (Not Implemented) -+ beq 2f -+ cmp r0, r5 @ If not matching, try next entry -+ addne r4, r4, #8 -+ bne 1b -+ cmp r6, #0 @ Not implemented -+ moveq r0, #ARM_PSCI_RET_NI -+ beq 2f -+ -+ blx r6 @ Execute PSCI function -+ -+ @ Switch back to non-secure -+ mcr p15, 0, r7, c1, c1, 0 -+ -+2: pop {r3-r7, lr} -+ movs pc, lr @ Return to the kernel -+ -+ .popsection -diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h -new file mode 100644 -index 0000000..704b4b0 ---- /dev/null -+++ b/arch/arm/include/asm/psci.h -@@ -0,0 +1,35 @@ -+/* -+ * Copyright (C) 2013 - ARM Ltd -+ * Author: Marc Zyngier -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . -+ */ -+ -+#ifndef __ARM_PSCI_H__ -+#define __ARM_PSCI_H__ -+ -+/* PSCI interface */ -+#define ARM_PSCI_FN_BASE 0x95c1ba5e -+#define ARM_PSCI_FN(n) (ARM_PSCI_FN_BASE + (n)) -+ -+#define ARM_PSCI_FN_CPU_SUSPEND ARM_PSCI_FN(0) -+#define ARM_PSCI_FN_CPU_OFF ARM_PSCI_FN(1) -+#define ARM_PSCI_FN_CPU_ON ARM_PSCI_FN(2) -+#define ARM_PSCI_FN_MIGRATE ARM_PSCI_FN(3) -+ -+#define ARM_PSCI_RET_SUCCESS 0 -+#define ARM_PSCI_RET_NI (-1) -+#define ARM_PSCI_RET_INVAL (-2) -+#define ARM_PSCI_RET_DENIED (-3) -+ -+#endif /* __ARM_PSCI_H__ */ -From 0ca6171c385fed00125b320592ee94922f44f13a Mon Sep 17 00:00:00 2001 -From: Marc Zyngier -Date: Sat, 7 Dec 2013 11:19:14 +0000 -Subject: [PATCH] ARM: HYP/non-sec: add the option for a second-stage monitor - -Allow the switch to a second stage secure monitor just before -switching to non-secure. - -This allows a resident piece of firmware to be active once the -kernel has been entered (the u-boot monitor is dead anyway, -its pages being reused). - -Signed-off-by: Marc Zyngier ---- - arch/arm/cpu/armv7/nonsec_virt.S | 13 +++++++++++-- - 1 file changed, 11 insertions(+), 2 deletions(-) - -diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S -index 2a43e3c..745670e 100644 ---- a/arch/arm/cpu/armv7/nonsec_virt.S -+++ b/arch/arm/cpu/armv7/nonsec_virt.S -@@ -44,10 +44,19 @@ _monitor_vectors: - * ip: target PC - */ - _secure_monitor: -+#ifdef CONFIG_ARMV7_PSCI -+ ldr r5, =_psci_vectors @ Switch to the next monitor -+ mcr p15, 0, r5, c12, c0, 1 -+ isb -+ -+ @ Obtain a secure stack, and configure the PSCI backend -+ bl psci_arch_init -+#endif -+ - mrc p15, 0, r5, c1, c1, 0 @ read SCR -- bic r5, r5, #0x4e @ clear IRQ, FIQ, EA, nET bits -+ bic r5, r5, #0x4a @ clear IRQ, EA, nET bits - orr r5, r5, #0x31 @ enable NS, AW, FW bits -- -+ @ FIQ preserved for secure mode - mov r6, #SVC_MODE @ default mode is SVC - is_cpu_virt_capable r4 - #ifdef CONFIG_ARMV7_VIRT -From 9aa373162eb2cc0055a6e4ecd46977c911de1124 Mon Sep 17 00:00:00 2001 -From: Ma Haijun -Date: Sat, 15 Feb 2014 12:51:10 +0000 -Subject: [PATCH] ARM: convert arch_fixup_memory_node to a generic FDT fixup - function - -Some architecture needs extra device tree setup. Instead of adding -yet another hook, convert arch_fixup_memory_node to be a generic -FDT fixup function. - -[maz: collapsed 3 patches into one, rewrote commit message] - -Signed-off-by: Ma Haijun -Signed-off-by: Marc Zyngier ---- - arch/arm/lib/bootm-fdt.c | 2 +- - arch/arm/lib/bootm.c | 2 +- - common/image-fdt.c | 7 +++++-- - include/common.h | 6 +++--- - 4 files changed, 10 insertions(+), 7 deletions(-) - -diff --git a/arch/arm/lib/bootm-fdt.c b/arch/arm/lib/bootm-fdt.c -index e40691d..8394e15 100644 ---- a/arch/arm/lib/bootm-fdt.c -+++ b/arch/arm/lib/bootm-fdt.c -@@ -20,7 +20,7 @@ - - DECLARE_GLOBAL_DATA_PTR; - --int arch_fixup_memory_node(void *blob) -+int arch_fixup_fdt(void *blob) - { - bd_t *bd = gd->bd; - int bank; -diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c -index 61aa14e..4cff6b0 100644 ---- a/arch/arm/lib/bootm.c -+++ b/arch/arm/lib/bootm.c -@@ -357,7 +357,7 @@ void boot_prep_vxworks(bootm_headers_t *images) - if (images->ft_addr) { - off = fdt_path_offset(images->ft_addr, "/memory"); - if (off < 0) { -- if (arch_fixup_memory_node(images->ft_addr)) -+ if (arch_fixup_fdt(images->ft_addr)) - puts("## WARNING: fixup memory failed!\n"); - } - } -diff --git a/common/image-fdt.c b/common/image-fdt.c -index a54a919..6f074de 100644 ---- a/common/image-fdt.c -+++ b/common/image-fdt.c -@@ -445,7 +445,7 @@ __weak int ft_verify_fdt(void *fdt) - return 1; - } - --__weak int arch_fixup_memory_node(void *blob) -+__weak int arch_fixup_fdt(void *blob) - { - return 0; - } -@@ -462,7 +462,10 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob, - puts(" - must RESET the board to recover.\n"); - return -1; - } -- arch_fixup_memory_node(blob); -+ if (arch_fixup_fdt(blob) < 0) { -+ puts("ERROR: arch specific fdt fixup failed"); -+ return -1; -+ } - if (IMAGE_OF_BOARD_SETUP) - ft_board_setup(blob, gd->bd); - fdt_fixup_ethernet(blob); -diff --git a/include/common.h b/include/common.h -index cbd3c9e..700b015 100644 ---- a/include/common.h -+++ b/include/common.h -@@ -326,14 +326,14 @@ int arch_early_init_r(void); - void board_show_dram(ulong size); - - /** -- * arch_fixup_memory_node() - Write arch-specific memory information to fdt -+ * arch_fixup_fdt() - Write arch-specific information to fdt - * -- * Defined in arch/$(ARCH)/lib/bootm.c -+ * Defined in arch/$(ARCH)/lib/bootm-fdt.c - * - * @blob: FDT blob to write to - * @return 0 if ok, or -ve FDT_ERR_... on failure - */ --int arch_fixup_memory_node(void *blob); -+int arch_fixup_fdt(void *blob); - - /* common/flash.c */ - void flash_perror (int); -From ccdf689da800c9f1c5226146e936b071c7ec8800 Mon Sep 17 00:00:00 2001 -From: Marc Zyngier -Date: Sat, 7 Dec 2013 11:19:15 +0000 -Subject: [PATCH] ARM: HYP/non-sec/PSCI: emit DT nodes - -Generate the PSCI node in the device tree. - -Also add a reserve section for the "secure" code that lives in -in normal RAM, so that the kernel knows it'd better not trip on -it. - -Signed-off-by: Marc Zyngier ---- - arch/arm/cpu/armv7/Makefile | 1 + - arch/arm/cpu/armv7/virt-dt.c | 100 +++++++++++++++++++++++++++++++++++++++++++ - arch/arm/include/asm/armv7.h | 1 + - arch/arm/lib/bootm-fdt.c | 11 ++++- - 4 files changed, 111 insertions(+), 2 deletions(-) - create mode 100644 arch/arm/cpu/armv7/virt-dt.c - -diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile -index 0cf5c45..93a5a69 100644 ---- a/arch/arm/cpu/armv7/Makefile -+++ b/arch/arm/cpu/armv7/Makefile -@@ -22,6 +22,7 @@ endif - ifneq ($(CONFIG_ARMV7_NONSEC)$(CONFIG_ARMV7_VIRT),) - obj-y += nonsec_virt.o - obj-y += virt-v7.o -+obj-y += virt-dt.o - endif - - ifneq ($(CONFIG_ARMV7_PSCI),) -diff --git a/arch/arm/cpu/armv7/virt-dt.c b/arch/arm/cpu/armv7/virt-dt.c -new file mode 100644 -index 0000000..0b0d6a7 ---- /dev/null -+++ b/arch/arm/cpu/armv7/virt-dt.c -@@ -0,0 +1,100 @@ -+/* -+ * Copyright (C) 2013 - ARM Ltd -+ * Author: Marc Zyngier -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static int fdt_psci(void *fdt) -+{ -+#ifdef CONFIG_ARMV7_PSCI -+ int nodeoff; -+ int tmp; -+ -+ nodeoff = fdt_path_offset(fdt, "/cpus"); -+ if (nodeoff < 0) { -+ printf("couldn't find /cpus\n"); -+ return nodeoff; -+ } -+ -+ /* add 'enable-method = "psci"' to each cpu node */ -+ for (tmp = fdt_first_subnode(fdt, nodeoff); -+ tmp >= 0; -+ tmp = fdt_next_subnode(fdt, tmp)) { -+ const struct fdt_property *prop; -+ int len; -+ -+ prop = fdt_get_property(fdt, tmp, "device_type", &len); -+ if (!prop) -+ continue; -+ if (len < 4) -+ continue; -+ if (strcmp(prop->data, "cpu")) -+ continue; -+ -+ fdt_setprop_string(fdt, tmp, "enable-method", "psci"); -+ } -+ -+ nodeoff = fdt_path_offset(fdt, "/psci"); -+ if (nodeoff < 0) { -+ nodeoff = fdt_path_offset(fdt, "/"); -+ if (nodeoff < 0) -+ return nodeoff; -+ -+ nodeoff = fdt_add_subnode(fdt, nodeoff, "psci"); -+ if (nodeoff < 0) -+ return nodeoff; -+ } -+ -+ tmp = fdt_setprop_string(fdt, nodeoff, "compatible", "arm,psci"); -+ if (tmp) -+ return tmp; -+ tmp = fdt_setprop_string(fdt, nodeoff, "method", "smc"); -+ if (tmp) -+ return tmp; -+ tmp = fdt_setprop_u32(fdt, nodeoff, "cpu_suspend", ARM_PSCI_FN_CPU_SUSPEND); -+ if (tmp) -+ return tmp; -+ tmp = fdt_setprop_u32(fdt, nodeoff, "cpu_off", ARM_PSCI_FN_CPU_OFF); -+ if (tmp) -+ return tmp; -+ tmp = fdt_setprop_u32(fdt, nodeoff, "cpu_on", ARM_PSCI_FN_CPU_ON); -+ if (tmp) -+ return tmp; -+ tmp = fdt_setprop_u32(fdt, nodeoff, "migrate", ARM_PSCI_FN_MIGRATE); -+ if (tmp) -+ return tmp; -+#endif -+ return 0; -+} -+ -+int armv7_update_dt(void *fdt) -+{ -+#ifndef CONFIG_ARMV7_SECURE_BASE -+ /* secure code lives in RAM, keep it alive */ -+ fdt_add_mem_rsv(fdt, (unsigned long)__secure_start, -+ __secure_end - __secure_start); -+#endif -+ -+ return fdt_psci(fdt); -+} -diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h -index 11476dd..323f282 100644 ---- a/arch/arm/include/asm/armv7.h -+++ b/arch/arm/include/asm/armv7.h -@@ -79,6 +79,7 @@ void v7_outer_cache_inval_range(u32 start, u32 end); - #if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT) - - int armv7_init_nonsec(void); -+int armv7_update_dt(void *fdt); - - /* defined in assembly file */ - unsigned int _nonsec_init(void); -diff --git a/arch/arm/lib/bootm-fdt.c b/arch/arm/lib/bootm-fdt.c -index 8394e15..ccb76c7 100644 ---- a/arch/arm/lib/bootm-fdt.c -+++ b/arch/arm/lib/bootm-fdt.c -@@ -17,13 +17,14 @@ - - #include - #include -+#include - - DECLARE_GLOBAL_DATA_PTR; - - int arch_fixup_fdt(void *blob) - { - bd_t *bd = gd->bd; -- int bank; -+ int bank, ret; - u64 start[CONFIG_NR_DRAM_BANKS]; - u64 size[CONFIG_NR_DRAM_BANKS]; - -@@ -32,5 +33,11 @@ int arch_fixup_fdt(void *blob) - size[bank] = bd->bi_dram[bank].size; - } - -- return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS); -+ ret = fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS); -+ if (ret) -+ return ret; -+ -+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT) -+ return armv7_update_dt(blob); -+#endif - } -From d5ee64675e6481e4f29e48e494ea132cd74786c8 Mon Sep 17 00:00:00 2001 -From: Marc Zyngier -Date: Sat, 7 Dec 2013 11:19:17 +0000 -Subject: [PATCH] sunxi: HYP/non-sec: add sun7i PSCI backend - -So far, only supporting the CPU_ON method. -Other functions can be added later. - -Signed-off-by: Marc Zyngier ---- - arch/arm/cpu/armv7/sunxi/Makefile | 3 + - arch/arm/cpu/armv7/sunxi/psci.S | 162 ++++++++++++++++++++++++++++++++++++++ - include/configs/sun7i.h | 6 ++ - 3 files changed, 171 insertions(+) - create mode 100644 arch/arm/cpu/armv7/sunxi/psci.S - -diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile -index 19e4b17..0df6772 100644 ---- a/arch/arm/cpu/armv7/sunxi/Makefile -+++ b/arch/arm/cpu/armv7/sunxi/Makefile -@@ -32,6 +32,9 @@ obj-y += cpu_info.o - ifdef CONFIG_CMD_WATCHDOG - obj-$(CONFIG_CMD_WATCHDOG) += cmd_watchdog.o - endif -+ifdef CONFIG_ARMV7_PSCI -+obj-y += psci.o -+endif - endif - - ifdef CONFIG_SPL_BUILD -diff --git a/arch/arm/cpu/armv7/sunxi/psci.S b/arch/arm/cpu/armv7/sunxi/psci.S -new file mode 100644 -index 0000000..0084c81 ---- /dev/null -+++ b/arch/arm/cpu/armv7/sunxi/psci.S -@@ -0,0 +1,162 @@ -+/* -+ * Copyright (C) 2013 - ARM Ltd -+ * Author: Marc Zyngier -+ * -+ * Based on code by Carl van Schaik . -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . -+ */ -+ -+#include -+#include -+#include -+ -+/* -+ * Memory layout: -+ * -+ * SECURE_RAM to text_end : -+ * ._secure_text section -+ * text_end to ALIGN_PAGE(text_end): -+ * nothing -+ * ALIGN_PAGE(text_end) to ALIGN_PAGE(text_end) + 0x1000) -+ * 1kB of stack per CPU (4 CPUs max). -+ */ -+ -+ .pushsection ._secure.text, "ax" -+ -+ .arch_extension sec -+ -+#define ONE_MS (CONFIG_SYS_CLK_FREQ / 1000) -+#define TEN_MS (10 * ONE_MS) -+ -+.macro timer_wait reg, ticks -+ @ Program CNTP_TVAL -+ movw \reg, #(\ticks & 0xffff) -+ movt \reg, #(\ticks >> 16) -+ mcr p15, 0, \reg, c14, c2, 0 -+ isb -+ @ Enable physical timer, mask interrupt -+ mov \reg, #3 -+ mcr p15, 0, \reg, c14, c2, 1 -+ @ Poll physical timer until ISTATUS is on -+1: isb -+ mrc p15, 0, \reg, c14, c2, 1 -+ ands \reg, \reg, #4 -+ bne 1b -+ @ Disable timer -+ mov \reg, #0 -+ mcr p15, 0, \reg, c14, c2, 1 -+ isb -+.endm -+ -+.globl psci_arch_init -+psci_arch_init: -+ mrc p15, 0, r5, c1, c1, 0 @ Read SCR -+ bic r5, r5, #1 @ Secure mode -+ mcr p15, 0, r5, c1, c1, 0 @ Write SCR -+ isb -+ -+ mrc p15, 0, r4, c0, c0, 5 @ MPIDR -+ and r4, r4, #3 @ cpu number in cluster -+ mov r5, #400 @ 1kB of stack per CPU -+ mul r4, r4, r5 -+ -+ adr r5, text_end @ end of text -+ add r5, r5, #0x2000 @ Skip two pages -+ lsr r5, r5, #12 @ Align to start of page -+ lsl r5, r5, #12 -+ sub sp, r5, r4 @ here's our stack! -+ -+ bx lr -+ -+ @ r1 = target CPU -+ @ r2 = target PC -+.globl psci_cpu_on -+psci_cpu_on: -+ adr r0, _target_pc -+ str r2, [r0] -+ dsb -+ -+ movw r0, #(SUNXI_CPUCFG_BASE & 0xffff) -+ movt r0, #(SUNXI_CPUCFG_BASE >> 16) -+ -+ @ CPU mask -+ and r1, r1, #3 @ only care about first cluster -+ mov r4, #1 -+ lsl r4, r4, r1 -+ -+ adr r6, _sunxi_cpu_entry -+ str r6, [r0, #0x1a4] @ PRIVATE_REG (boot vector) -+ -+ @ Assert reset on target CPU -+ mov r6, #0 -+ lsl r5, r1, #6 @ 64 bytes per CPU -+ add r5, r5, #0x40 @ Offset from base -+ add r5, r5, r0 @ CPU control block -+ str r6, [r5] @ Reset CPU -+ -+ @ l1 invalidate -+ ldr r6, [r0, #0x184] -+ bic r6, r6, r4 -+ str r6, [r0, #0x184] -+ -+ @ Lock CPU -+ ldr r6, [r0, #0x1e4] -+ bic r6, r6, r4 -+ str r6, [r0, #0x1e4] -+ -+ @ Release power clamp -+ movw r6, #0x1ff -+ movt r6, #0 -+1: lsrs r6, r6, #1 -+ str r6, [r0, #0x1b0] -+ bne 1b -+ -+ timer_wait r1, TEN_MS -+ -+ @ Clear power gating -+ ldr r6, [r0, #0x1b4] -+ bic r6, r6, #1 -+ str r6, [r0, #0x1b4] -+ -+ @ Deassert reset on target CPU -+ mov r6, #3 -+ str r6, [r5] -+ -+ @ Unlock CPU -+ ldr r6, [r0, #0x1e4] -+ orr r6, r6, r4 -+ str r6, [r0, #0x1e4] -+ -+ mov r0, #ARM_PSCI_RET_SUCCESS @ Return PSCI_RET_SUCCESS -+ mov pc, lr -+ -+_target_pc: -+ .word 0 -+ -+_sunxi_cpu_entry: -+ @ Set SMP bit -+ mrc p15, 0, r0, c1, c0, 1 -+ orr r0, r0, #0x40 -+ mcr p15, 0, r0, c1, c0, 1 -+ isb -+ -+ bl _nonsec_init -+ bl psci_arch_init -+ -+ adr r0, _target_pc -+ ldr r0, [r0] -+ b _do_nonsec_entry -+ -+text_end: -+ .popsection -diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h -index 11cc9ea..bae7b37 100644 ---- a/include/configs/sun7i.h -+++ b/include/configs/sun7i.h -@@ -22,6 +22,12 @@ - #define CONFIG_BOARD_POSTCLK_INIT 1 - #endif - -+#define CONFIG_ARMV7_VIRT 1 -+#define CONFIG_ARMV7_NONSEC 1 -+#define CONFIG_ARMV7_PSCI 1 -+#define CONFIG_ARMV7_PSCI_NR_CPUS 2 -+#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE -+ - /* - * Include common sunxi configuration where most the settings are - */ -From a74a847c3727209a45c30a80c01b930938941dd4 Mon Sep 17 00:00:00 2001 -From: Marc Zyngier -Date: Sat, 7 Dec 2013 11:19:18 +0000 -Subject: [PATCH] sunxi: HYP/non-sec: configure CNTFRQ on all CPUs - -CNTFRQ needs to be properly configured on all CPUs. Otherwise, -virtual machines hoping to find valuable information on secondary -CPUs will be disapointed... - -Signed-off-by: Marc Zyngier ---- - include/configs/sun7i.h | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h -index bae7b37..58a254b 100644 ---- a/include/configs/sun7i.h -+++ b/include/configs/sun7i.h -@@ -27,6 +27,7 @@ - #define CONFIG_ARMV7_PSCI 1 - #define CONFIG_ARMV7_PSCI_NR_CPUS 2 - #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE -+#define CONFIG_SYS_CLK_FREQ 24000000 - - /* - * Include common sunxi configuration where most the settings are diff --git a/package/boot/uboot-sunxi/patches/003-add-lemaker-bananapro.diff b/package/boot/uboot-sunxi/patches/003-add-lemaker-bananapro.diff new file mode 100644 index 0000000000..1d2677c5b4 --- /dev/null +++ b/package/boot/uboot-sunxi/patches/003-add-lemaker-bananapro.diff @@ -0,0 +1,22 @@ +diff -ruN u-boot-2015.01-rc3.old/board/sunxi/Makefile u-boot-2015.01-rc3/board/sunxi/Makefile +--- u-boot-2015.01-rc3.old/board/sunxi/Makefile 2015-01-04 13:01:29.000000000 +0100 ++++ u-boot-2015.01-rc3/board/sunxi/Makefile 2015-01-04 18:06:50.304380318 +0100 +@@ -22,6 +22,7 @@ + obj-$(CONFIG_TARGET_AUXTEK_T004) += dram_a10s_olinuxino_m.o + obj-$(CONFIG_TARGET_BA10_TV_BOX) += dram_sun4i_384_1024_iow8.o + obj-$(CONFIG_TARGET_BANANAPI) += dram_bananapi.o ++obj-$(CONFIG_TARGET_BANANAPI) += dram_bananapi.o + obj-$(CONFIG_TARGET_CUBIEBOARD) += dram_cubieboard.o + obj-$(CONFIG_TARGET_CUBIEBOARD2) += dram_cubieboard2.o + obj-$(CONFIG_TARGET_CUBIETRUCK) += dram_cubietruck.o +diff -ruN u-boot-2015.01-rc3.old/configs/Bananapro_defconfig u-boot-2015.01-rc3/configs/Bananapro_defconfig +--- u-boot-2015.01-rc3.old/configs/Bananapro_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2015.01-rc3/configs/Bananapro_defconfig 2015-01-04 18:06:19.784880656 +0100 +@@ -0,0 +1,7 @@ ++CONFIG_SPL=y ++CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" ++CONFIG_FDTFILE="sun7i-a20-bananapro.dtb" +++S:CONFIG_ARM=y +++S:CONFIG_ARCH_SUNXI=y +++S:CONFIG_MACH_SUN7I=y +++S:CONFIG_TARGET_BANANAPRO=y diff --git a/package/boot/uboot-sunxi/patches/003-uboot-fix-gmac-not-working-reliable-on-bananapi.patch b/package/boot/uboot-sunxi/patches/003-uboot-fix-gmac-not-working-reliable-on-bananapi.patch deleted file mode 100644 index 6bc8c93902..0000000000 --- a/package/boot/uboot-sunxi/patches/003-uboot-fix-gmac-not-working-reliable-on-bananapi.patch +++ /dev/null @@ -1,20 +0,0 @@ -diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c -index e7ff952..f58c963 100644 ---- a/board/sunxi/gmac.c -+++ b/board/sunxi/gmac.c -@@ -24,6 +24,15 @@ int sunxi_gmac_initialize(bd_t *bis) - CCM_GMAC_CTRL_GPIT_MII); - #endif - -+ /* -+ * HdG: this is necessary to get GMAC to work reliable on the -+ * Bananapi. We don't know what these undocumented bits do, so this -+ * is a Bananapi specific hack for now. -+ */ -+#ifdef CONFIG_BANANAPI -+ setbits_le32(&ccm->gmac_clk_cfg, 0x3 << 10); -+#endif -+ - /* Configure pin mux settings for GMAC */ - for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) { - #ifdef CONFIG_RGMII