From: Andy Shevchenko Date: Tue, 9 May 2017 16:18:37 +0000 (+0300) Subject: dmaengine: dw: Remove AVR32 bits from the driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=14bebd01c5f5306c804bcb78d008df3a149dd0b3;p=openwrt%2Fstaging%2Fblogic.git dmaengine: dw: Remove AVR32 bits from the driver AVR32 is gone. Now it's time to clean up the driver by removing leftovers that was used by AVR32 related code. Signed-off-by: Andy Shevchenko Acked-by: Vinod Koul Signed-off-by: Takashi Iwai --- diff --git a/drivers/dma/dw/Kconfig b/drivers/dma/dw/Kconfig index 5a37b9fcf40d..04b9728c1d26 100644 --- a/drivers/dma/dw/Kconfig +++ b/drivers/dma/dw/Kconfig @@ -6,17 +6,12 @@ config DW_DMAC_CORE tristate select DMA_ENGINE -config DW_DMAC_BIG_ENDIAN_IO - bool - config DW_DMAC tristate "Synopsys DesignWare AHB DMA platform driver" select DW_DMAC_CORE - select DW_DMAC_BIG_ENDIAN_IO if AVR32 - default y if CPU_AT32AP7000 help Support the Synopsys DesignWare AHB DMA controller. This - can be integrated in chips such as the Atmel AT32ap7000. + can be integrated in chips such as the Intel Cherrytrail. config DW_DMAC_PCI tristate "Synopsys DesignWare AHB DMA PCI driver" diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index e500950dad82..f43e6dafe446 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -561,92 +561,14 @@ static void dwc_handle_error(struct dw_dma *dw, struct dw_dma_chan *dwc) dwc_descriptor_complete(dwc, bad_desc, true); } -/* --------------------- Cyclic DMA API extensions -------------------- */ - -dma_addr_t dw_dma_get_src_addr(struct dma_chan *chan) -{ - struct dw_dma_chan *dwc = to_dw_dma_chan(chan); - return channel_readl(dwc, SAR); -} -EXPORT_SYMBOL(dw_dma_get_src_addr); - -dma_addr_t dw_dma_get_dst_addr(struct dma_chan *chan) -{ - struct dw_dma_chan *dwc = to_dw_dma_chan(chan); - return channel_readl(dwc, DAR); -} -EXPORT_SYMBOL(dw_dma_get_dst_addr); - -/* Called with dwc->lock held and all DMAC interrupts disabled */ -static void dwc_handle_cyclic(struct dw_dma *dw, struct dw_dma_chan *dwc, - u32 status_block, u32 status_err, u32 status_xfer) -{ - unsigned long flags; - - if (status_block & dwc->mask) { - void (*callback)(void *param); - void *callback_param; - - dev_vdbg(chan2dev(&dwc->chan), "new cyclic period llp 0x%08x\n", - channel_readl(dwc, LLP)); - dma_writel(dw, CLEAR.BLOCK, dwc->mask); - - callback = dwc->cdesc->period_callback; - callback_param = dwc->cdesc->period_callback_param; - - if (callback) - callback(callback_param); - } - - /* - * Error and transfer complete are highly unlikely, and will most - * likely be due to a configuration error by the user. - */ - if (unlikely(status_err & dwc->mask) || - unlikely(status_xfer & dwc->mask)) { - unsigned int i; - - dev_err(chan2dev(&dwc->chan), - "cyclic DMA unexpected %s interrupt, stopping DMA transfer\n", - status_xfer ? "xfer" : "error"); - - spin_lock_irqsave(&dwc->lock, flags); - - dwc_dump_chan_regs(dwc); - - dwc_chan_disable(dw, dwc); - - /* Make sure DMA does not restart by loading a new list */ - channel_writel(dwc, LLP, 0); - channel_writel(dwc, CTL_LO, 0); - channel_writel(dwc, CTL_HI, 0); - - dma_writel(dw, CLEAR.BLOCK, dwc->mask); - dma_writel(dw, CLEAR.ERROR, dwc->mask); - dma_writel(dw, CLEAR.XFER, dwc->mask); - - for (i = 0; i < dwc->cdesc->periods; i++) - dwc_dump_lli(dwc, dwc->cdesc->desc[i]); - - spin_unlock_irqrestore(&dwc->lock, flags); - } - - /* Re-enable interrupts */ - channel_set_bit(dw, MASK.BLOCK, dwc->mask); -} - -/* ------------------------------------------------------------------------- */ - static void dw_dma_tasklet(unsigned long data) { struct dw_dma *dw = (struct dw_dma *)data; struct dw_dma_chan *dwc; - u32 status_block; u32 status_xfer; u32 status_err; unsigned int i; - status_block = dma_readl(dw, RAW.BLOCK); status_xfer = dma_readl(dw, RAW.XFER); status_err = dma_readl(dw, RAW.ERROR); @@ -655,8 +577,7 @@ static void dw_dma_tasklet(unsigned long data) for (i = 0; i < dw->dma.chancnt; i++) { dwc = &dw->chan[i]; if (test_bit(DW_DMA_IS_CYCLIC, &dwc->flags)) - dwc_handle_cyclic(dw, dwc, status_block, status_err, - status_xfer); + dev_vdbg(dw->dma.dev, "Cyclic xfer is not implemented\n"); else if (status_err & (1 << i)) dwc_handle_error(dw, dwc); else if (status_xfer & (1 << i)) @@ -1264,255 +1185,6 @@ static void dwc_free_chan_resources(struct dma_chan *chan) dev_vdbg(chan2dev(chan), "%s: done\n", __func__); } -/* --------------------- Cyclic DMA API extensions -------------------- */ - -/** - * dw_dma_cyclic_start - start the cyclic DMA transfer - * @chan: the DMA channel to start - * - * Must be called with soft interrupts disabled. Returns zero on success or - * -errno on failure. - */ -int dw_dma_cyclic_start(struct dma_chan *chan) -{ - struct dw_dma_chan *dwc = to_dw_dma_chan(chan); - struct dw_dma *dw = to_dw_dma(chan->device); - unsigned long flags; - - if (!test_bit(DW_DMA_IS_CYCLIC, &dwc->flags)) { - dev_err(chan2dev(&dwc->chan), "missing prep for cyclic DMA\n"); - return -ENODEV; - } - - spin_lock_irqsave(&dwc->lock, flags); - - /* Enable interrupts to perform cyclic transfer */ - channel_set_bit(dw, MASK.BLOCK, dwc->mask); - - dwc_dostart(dwc, dwc->cdesc->desc[0]); - - spin_unlock_irqrestore(&dwc->lock, flags); - - return 0; -} -EXPORT_SYMBOL(dw_dma_cyclic_start); - -/** - * dw_dma_cyclic_stop - stop the cyclic DMA transfer - * @chan: the DMA channel to stop - * - * Must be called with soft interrupts disabled. - */ -void dw_dma_cyclic_stop(struct dma_chan *chan) -{ - struct dw_dma_chan *dwc = to_dw_dma_chan(chan); - struct dw_dma *dw = to_dw_dma(dwc->chan.device); - unsigned long flags; - - spin_lock_irqsave(&dwc->lock, flags); - - dwc_chan_disable(dw, dwc); - - spin_unlock_irqrestore(&dwc->lock, flags); -} -EXPORT_SYMBOL(dw_dma_cyclic_stop); - -/** - * dw_dma_cyclic_prep - prepare the cyclic DMA transfer - * @chan: the DMA channel to prepare - * @buf_addr: physical DMA address where the buffer starts - * @buf_len: total number of bytes for the entire buffer - * @period_len: number of bytes for each period - * @direction: transfer direction, to or from device - * - * Must be called before trying to start the transfer. Returns a valid struct - * dw_cyclic_desc if successful or an ERR_PTR(-errno) if not successful. - */ -struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan, - dma_addr_t buf_addr, size_t buf_len, size_t period_len, - enum dma_transfer_direction direction) -{ - struct dw_dma_chan *dwc = to_dw_dma_chan(chan); - struct dma_slave_config *sconfig = &dwc->dma_sconfig; - struct dw_cyclic_desc *cdesc; - struct dw_cyclic_desc *retval = NULL; - struct dw_desc *desc; - struct dw_desc *last = NULL; - u8 lms = DWC_LLP_LMS(dwc->dws.m_master); - unsigned long was_cyclic; - unsigned int reg_width; - unsigned int periods; - unsigned int i; - unsigned long flags; - - spin_lock_irqsave(&dwc->lock, flags); - if (dwc->nollp) { - spin_unlock_irqrestore(&dwc->lock, flags); - dev_dbg(chan2dev(&dwc->chan), - "channel doesn't support LLP transfers\n"); - return ERR_PTR(-EINVAL); - } - - if (!list_empty(&dwc->queue) || !list_empty(&dwc->active_list)) { - spin_unlock_irqrestore(&dwc->lock, flags); - dev_dbg(chan2dev(&dwc->chan), - "queue and/or active list are not empty\n"); - return ERR_PTR(-EBUSY); - } - - was_cyclic = test_and_set_bit(DW_DMA_IS_CYCLIC, &dwc->flags); - spin_unlock_irqrestore(&dwc->lock, flags); - if (was_cyclic) { - dev_dbg(chan2dev(&dwc->chan), - "channel already prepared for cyclic DMA\n"); - return ERR_PTR(-EBUSY); - } - - retval = ERR_PTR(-EINVAL); - - if (unlikely(!is_slave_direction(direction))) - goto out_err; - - dwc->direction = direction; - - if (direction == DMA_MEM_TO_DEV) - reg_width = __ffs(sconfig->dst_addr_width); - else - reg_width = __ffs(sconfig->src_addr_width); - - periods = buf_len / period_len; - - /* Check for too big/unaligned periods and unaligned DMA buffer. */ - if (period_len > (dwc->block_size << reg_width)) - goto out_err; - if (unlikely(period_len & ((1 << reg_width) - 1))) - goto out_err; - if (unlikely(buf_addr & ((1 << reg_width) - 1))) - goto out_err; - - retval = ERR_PTR(-ENOMEM); - - cdesc = kzalloc(sizeof(struct dw_cyclic_desc), GFP_KERNEL); - if (!cdesc) - goto out_err; - - cdesc->desc = kzalloc(sizeof(struct dw_desc *) * periods, GFP_KERNEL); - if (!cdesc->desc) - goto out_err_alloc; - - for (i = 0; i < periods; i++) { - desc = dwc_desc_get(dwc); - if (!desc) - goto out_err_desc_get; - - switch (direction) { - case DMA_MEM_TO_DEV: - lli_write(desc, dar, sconfig->dst_addr); - lli_write(desc, sar, buf_addr + period_len * i); - lli_write(desc, ctllo, (DWC_DEFAULT_CTLLO(chan) - | DWC_CTLL_DST_WIDTH(reg_width) - | DWC_CTLL_SRC_WIDTH(reg_width) - | DWC_CTLL_DST_FIX - | DWC_CTLL_SRC_INC - | DWC_CTLL_INT_EN)); - - lli_set(desc, ctllo, sconfig->device_fc ? - DWC_CTLL_FC(DW_DMA_FC_P_M2P) : - DWC_CTLL_FC(DW_DMA_FC_D_M2P)); - - break; - case DMA_DEV_TO_MEM: - lli_write(desc, dar, buf_addr + period_len * i); - lli_write(desc, sar, sconfig->src_addr); - lli_write(desc, ctllo, (DWC_DEFAULT_CTLLO(chan) - | DWC_CTLL_SRC_WIDTH(reg_width) - | DWC_CTLL_DST_WIDTH(reg_width) - | DWC_CTLL_DST_INC - | DWC_CTLL_SRC_FIX - | DWC_CTLL_INT_EN)); - - lli_set(desc, ctllo, sconfig->device_fc ? - DWC_CTLL_FC(DW_DMA_FC_P_P2M) : - DWC_CTLL_FC(DW_DMA_FC_D_P2M)); - - break; - default: - break; - } - - lli_write(desc, ctlhi, period_len >> reg_width); - cdesc->desc[i] = desc; - - if (last) - lli_write(last, llp, desc->txd.phys | lms); - - last = desc; - } - - /* Let's make a cyclic list */ - lli_write(last, llp, cdesc->desc[0]->txd.phys | lms); - - dev_dbg(chan2dev(&dwc->chan), - "cyclic prepared buf %pad len %zu period %zu periods %d\n", - &buf_addr, buf_len, period_len, periods); - - cdesc->periods = periods; - dwc->cdesc = cdesc; - - return cdesc; - -out_err_desc_get: - while (i--) - dwc_desc_put(dwc, cdesc->desc[i]); -out_err_alloc: - kfree(cdesc); -out_err: - clear_bit(DW_DMA_IS_CYCLIC, &dwc->flags); - return (struct dw_cyclic_desc *)retval; -} -EXPORT_SYMBOL(dw_dma_cyclic_prep); - -/** - * dw_dma_cyclic_free - free a prepared cyclic DMA transfer - * @chan: the DMA channel to free - */ -void dw_dma_cyclic_free(struct dma_chan *chan) -{ - struct dw_dma_chan *dwc = to_dw_dma_chan(chan); - struct dw_dma *dw = to_dw_dma(dwc->chan.device); - struct dw_cyclic_desc *cdesc = dwc->cdesc; - unsigned int i; - unsigned long flags; - - dev_dbg(chan2dev(&dwc->chan), "%s\n", __func__); - - if (!cdesc) - return; - - spin_lock_irqsave(&dwc->lock, flags); - - dwc_chan_disable(dw, dwc); - - dma_writel(dw, CLEAR.BLOCK, dwc->mask); - dma_writel(dw, CLEAR.ERROR, dwc->mask); - dma_writel(dw, CLEAR.XFER, dwc->mask); - - spin_unlock_irqrestore(&dwc->lock, flags); - - for (i = 0; i < cdesc->periods; i++) - dwc_desc_put(dwc, cdesc->desc[i]); - - kfree(cdesc->desc); - kfree(cdesc); - - dwc->cdesc = NULL; - - clear_bit(DW_DMA_IS_CYCLIC, &dwc->flags); -} -EXPORT_SYMBOL(dw_dma_cyclic_free); - -/*----------------------------------------------------------------------*/ - int dw_dma_probe(struct dw_dma_chip *chip) { struct dw_dma_platform_data *pdata; @@ -1642,7 +1314,7 @@ int dw_dma_probe(struct dw_dma_chip *chip) if (autocfg) { unsigned int r = DW_DMA_MAX_NR_CHANNELS - i - 1; void __iomem *addr = &__dw_regs(dw)->DWC_PARAMS[r]; - unsigned int dwc_params = dma_readl_native(addr); + unsigned int dwc_params = readl(addr); dev_dbg(chip->dev, "DWC_PARAMS[%d]: 0x%08x\n", i, dwc_params); diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h index 32a328721c88..09e7dfdbb790 100644 --- a/drivers/dma/dw/regs.h +++ b/drivers/dma/dw/regs.h @@ -116,20 +116,6 @@ struct dw_dma_regs { DW_REG(GLOBAL_CFG); }; -/* - * Big endian I/O access when reading and writing to the DMA controller - * registers. This is needed on some platforms, like the Atmel AVR32 - * architecture. - */ - -#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO -#define dma_readl_native ioread32be -#define dma_writel_native iowrite32be -#else -#define dma_readl_native readl -#define dma_writel_native writel -#endif - /* Bitfields in DW_PARAMS */ #define DW_PARAMS_NR_CHAN 8 /* number of channels */ #define DW_PARAMS_NR_MASTER 11 /* number of AHB masters */ @@ -280,7 +266,6 @@ struct dw_dma_chan { unsigned long flags; struct list_head active_list; struct list_head queue; - struct dw_cyclic_desc *cdesc; unsigned int descs_allocated; @@ -302,9 +287,9 @@ __dwc_regs(struct dw_dma_chan *dwc) } #define channel_readl(dwc, name) \ - dma_readl_native(&(__dwc_regs(dwc)->name)) + readl(&(__dwc_regs(dwc)->name)) #define channel_writel(dwc, name, val) \ - dma_writel_native((val), &(__dwc_regs(dwc)->name)) + writel((val), &(__dwc_regs(dwc)->name)) static inline struct dw_dma_chan *to_dw_dma_chan(struct dma_chan *chan) { @@ -333,9 +318,9 @@ static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma *dw) } #define dma_readl(dw, name) \ - dma_readl_native(&(__dw_regs(dw)->name)) + readl(&(__dw_regs(dw)->name)) #define dma_writel(dw, name, val) \ - dma_writel_native((val), &(__dw_regs(dw)->name)) + writel((val), &(__dw_regs(dw)->name)) #define idma32_readq(dw, name) \ hi_lo_readq(&(__dw_regs(dw)->name)) @@ -352,43 +337,30 @@ static inline struct dw_dma *to_dw_dma(struct dma_device *ddev) return container_of(ddev, struct dw_dma, dma); } -#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO -typedef __be32 __dw32; -#else -typedef __le32 __dw32; -#endif - /* LLI == Linked List Item; a.k.a. DMA block descriptor */ struct dw_lli { /* values that are not changed by hardware */ - __dw32 sar; - __dw32 dar; - __dw32 llp; /* chain to next lli */ - __dw32 ctllo; + __le32 sar; + __le32 dar; + __le32 llp; /* chain to next lli */ + __le32 ctllo; /* values that may get written back: */ - __dw32 ctlhi; + __le32 ctlhi; /* sstat and dstat can snapshot peripheral register state. * silicon config may discard either or both... */ - __dw32 sstat; - __dw32 dstat; + __le32 sstat; + __le32 dstat; }; struct dw_desc { /* FIRST values the hardware uses */ struct dw_lli lli; -#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO -#define lli_set(d, reg, v) ((d)->lli.reg |= cpu_to_be32(v)) -#define lli_clear(d, reg, v) ((d)->lli.reg &= ~cpu_to_be32(v)) -#define lli_read(d, reg) be32_to_cpu((d)->lli.reg) -#define lli_write(d, reg, v) ((d)->lli.reg = cpu_to_be32(v)) -#else #define lli_set(d, reg, v) ((d)->lli.reg |= cpu_to_le32(v)) #define lli_clear(d, reg, v) ((d)->lli.reg &= ~cpu_to_le32(v)) #define lli_read(d, reg) le32_to_cpu((d)->lli.reg) #define lli_write(d, reg, v) ((d)->lli.reg = cpu_to_le32(v)) -#endif /* THEN values for driver housekeeping */ struct list_head desc_node; diff --git a/include/linux/dma/dw.h b/include/linux/dma/dw.h index b63b25814d77..e166cac8e870 100644 --- a/include/linux/dma/dw.h +++ b/include/linux/dma/dw.h @@ -50,25 +50,4 @@ static inline int dw_dma_probe(struct dw_dma_chip *chip) { return -ENODEV; } static inline int dw_dma_remove(struct dw_dma_chip *chip) { return 0; } #endif /* CONFIG_DW_DMAC_CORE */ -/* DMA API extensions */ -struct dw_desc; - -struct dw_cyclic_desc { - struct dw_desc **desc; - unsigned long periods; - void (*period_callback)(void *param); - void *period_callback_param; -}; - -struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan, - dma_addr_t buf_addr, size_t buf_len, size_t period_len, - enum dma_transfer_direction direction); -void dw_dma_cyclic_free(struct dma_chan *chan); -int dw_dma_cyclic_start(struct dma_chan *chan); -void dw_dma_cyclic_stop(struct dma_chan *chan); - -dma_addr_t dw_dma_get_src_addr(struct dma_chan *chan); - -dma_addr_t dw_dma_get_dst_addr(struct dma_chan *chan); - #endif /* _DMA_DW_H */