From: Florian Fainelli Date: Wed, 8 Apr 2009 08:52:57 +0000 (+0000) Subject: some more fixes to the SPI controller driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=14832d3c23c3eeb72db12022bfab1596f855fe5c;p=openwrt%2Fstaging%2Fansuel.git some more fixes to the SPI controller driver SVN-Revision: 15146 --- diff --git a/target/linux/brcm63xx/files/drivers/spi/bcm63xx_spi.c b/target/linux/brcm63xx/files/drivers/spi/bcm63xx_spi.c index 598196197e..b79b7f59e8 100644 --- a/target/linux/brcm63xx/files/drivers/spi/bcm63xx_spi.c +++ b/target/linux/brcm63xx/files/drivers/spi/bcm63xx_spi.c @@ -36,7 +36,7 @@ #include #define PFX KBUILD_MODNAME -#define DRV_VER "0.1.1" +#define DRV_VER "0.1.2" struct bcm63xx_spi { /* bitbang has to be first */ @@ -62,15 +62,16 @@ struct bcm63xx_spi { static void bcm63xx_spi_chipselect(struct spi_device *spi, int is_on) { + struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); u16 val; - val = bcm_spi_readw(SPI_CMD); + val = bcm_spi_readw(bs->regs, SPI_CMD); if (is_on == BITBANG_CS_INACTIVE) val |= SPI_CMD_NOOP; else if (is_on == BITBANG_CS_ACTIVE) val |= (1 << spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT); - bcm_spi_writew(val, SPI_CMD); + bcm_spi_writew(val, bs->regs, SPI_CMD); } static int bcm63xx_spi_setup_transfer(struct spi_device *spi, @@ -125,7 +126,7 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi, break; } - bcm_spi_writeb(clk_cfg, SPI_CLK_CFG); + bcm_spi_writeb(clk_cfg, bs->regs, SPI_CLK_CFG); dev_dbg(&spi->dev, "Setting clock register to %d (hz %d, cmd %02x)\n", div, hz, clk_cfg); @@ -172,14 +173,14 @@ static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs) u8 tail; /* Fill the Tx FIFO with as many bytes as possible */ - tail = bcm_spi_readb(SPI_MSG_TAIL); + tail = bcm_spi_readb(bs->regs, SPI_MSG_TAIL); while ((tail < bs->fifo_size) && (bs->remaining_bytes > 0)) { if (bs->tx_ptr) - bcm_spi_writeb(*bs->tx_ptr++, SPI_MSG_DATA); + bcm_spi_writeb(*bs->tx_ptr++, bs->regs, SPI_MSG_DATA); else - bcm_spi_writeb(0, SPI_MSG_DATA); + bcm_spi_writeb(0, bs->regs, SPI_MSG_DATA); bs->remaining_bytes--; - tail = bcm_spi_readb(SPI_MSG_TAIL); + tail = bcm_spi_readb(bs->regs, SPI_MSG_TAIL); } } @@ -202,24 +203,24 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) /* Enable the command done interrupt which * we use to determine completion of a command */ - bcm_writeb(SPI_INTR_CMD_DONE, SPI_INT_MASK); + bcm_spi_writeb(SPI_INTR_CMD_DONE, bs->regs, SPI_INT_MASK); /* Fill in the Message control register */ - msg_ctl = bcm_spi_readb(SPI_MSG_CTL); + msg_ctl = bcm_spi_readb(bs->regs, SPI_MSG_CTL); msg_ctl |= (t->len << SPI_BYTE_CNT_SHIFT); msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT); - bcm_spi_writeb(msg_ctl, SPI_MSG_CTL); + bcm_spi_writeb(msg_ctl, bs->regs, SPI_MSG_CTL); /* Issue the transfer */ - cmd = bcm_spi_readb(SPI_CMD); + cmd = bcm_spi_readb(bs->regs, SPI_CMD); cmd |= SPI_CMD_START_IMMEDIATE; cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); - bcm_spi_writeb(cmd, SPI_CMD); + bcm_spi_writeb(cmd, bs->regs, SPI_CMD); wait_for_completion(&bs->done); /* Disable the CMD_DONE interrupt */ - bcm_spi_writeb(~(SPI_INTR_CMD_DONE), SPI_INT_MASK); + bcm_spi_writeb(~(SPI_INTR_CMD_DONE), bs->regs, SPI_INT_MASK); return t->len - bs->remaining_bytes; } @@ -235,23 +236,23 @@ static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id) u16 cmd; /* Read interupts and clear them immediately */ - intr = bcm_spi_readb(SPI_INT_STATUS); - bcm_writeb(SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); + intr = bcm_spi_readb(bs->regs, SPI_INT_STATUS); + bcm_spi_writeb(SPI_INTR_CLEAR_ALL, bs->regs, SPI_INT_STATUS); /* A tansfer completed */ if (intr & SPI_INTR_CMD_DONE) { u8 rx_empty; - rx_empty = bcm_spi_readb(SPI_ST); + rx_empty = bcm_spi_readb(bs->regs, SPI_ST); /* Read out all the data */ while ((rx_empty & SPI_RX_EMPTY) == 0) { u8 data; - data = bcm_spi_readb(SPI_RX_DATA); + data = bcm_spi_readb(bs->regs, SPI_RX_DATA); if (bs->rx_ptr) *bs->rx_ptr++ = data; - rx_empty = bcm_spi_readb(SPI_RX_EMPTY); + rx_empty = bcm_spi_readb(bs->regs, SPI_RX_EMPTY); } /* See if there is more data to send */ @@ -259,10 +260,10 @@ static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id) bcm63xx_spi_fill_tx_fifo(bs); /* Start the transfer */ - cmd = bcm_spi_readb(SPI_CMD); + cmd = bcm_spi_readb(bs->regs, SPI_CMD); cmd |= SPI_CMD_START_IMMEDIATE; cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); - bcm_spi_writeb(cmd, SPI_CMD); + bcm_spi_writeb(cmd, bs->regs, SPI_CMD); } else complete(&bs->done); } @@ -346,8 +347,8 @@ static int __init bcm63xx_spi_probe(struct platform_device *pdev) /* Initialize hardware */ clk_enable(bs->clk); - bcm_spi_writew(SPI_CMD_HARD_RESET, SPI_CMD); - bcm_spi_writeb(SPI_INTR_CLEAR_ALL, SPI_INT_MASK); + bcm_spi_writew(SPI_CMD_HARD_RESET, bs->regs, SPI_CMD); + bcm_spi_writeb(SPI_INTR_CLEAR_ALL, bs->regs, SPI_INT_MASK); dev_info(&pdev->dev, PFX " at 0x%08x (irq %d, FIFOs size %d) v%s\n", r->start, irq, bs->fifo_size, DRV_VER); @@ -442,3 +443,4 @@ MODULE_ALIAS("platform:bcm63xx_spi"); MODULE_AUTHOR("Florian Fainelli "); MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver"); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VER); diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_io.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_io.h index 5331c25f7b..31e950e117 100644 --- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_io.h +++ b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_io.h @@ -93,15 +93,15 @@ /* * helpers for the SPI register sets */ -#define bcm_spi_readb(o) bcm_readb(bcm63xx_regset_address(RSET_SPI) + \ +#define bcm_spi_readb(b,o) bcm_readb((b) + \ bcm63xx_spireg(o)) -#define bcm_spi_readw(o) bcm_readw(bcm63xx_regset_address(RSET_SPI) + \ +#define bcm_spi_readw(b,o) bcm_readw((b) + \ bcm63xx_spireg(o)) -#define bcm_spi_writeb(v,o) bcm_writeb((v), \ - bcm63xx_regset_address(RSET_SPI) + \ +#define bcm_spi_writeb(v,b,o) bcm_writeb((v), \ + (b) + \ bcm63xx_spireg(o)) -#define bcm_spi_writew(v,o) bcm_writew((v), \ - bcm63xx_regset_address(RSET_SPI) + \ +#define bcm_spi_writew(v,b,o) bcm_writew((v), \ + (b) + \ bcm63xx_spireg(o)) #endif /* ! BCM63XX_IO_H_ */