From: Shawn Guo Date: Wed, 6 Jul 2011 16:37:42 +0000 (+0800) Subject: ARM: mxc: use ARCH_NR_GPIOS to define gpio number X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=14305e685dff531583e95c5076f633f2fe2b141c;p=openwrt%2Fstaging%2Fblogic.git ARM: mxc: use ARCH_NR_GPIOS to define gpio number The patch removes MXC_GPIO_IRQS and instead uses ARCH_NR_GPIOS to define gpio number. This change is need when we change mxc gpio driver to be device tree aware. When migrating the driver to device tree, pdev->id becomes unusable. It requires driver get gpio range from gpio core, which will dynamically allocates number from ARCH_NR_GPIOS to 0. As a bonus point, it removes lines of '#if' and make the code a little bit cleaner. The side effect is the waste of number. But this is not a point when we go single image. Signed-off-by: Shawn Guo Signed-off-by: Grant Likely --- diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index 35c89bcdf758..00e812bbd81d 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARCH_MXC_IRQS_H__ #define __ASM_ARCH_MXC_IRQS_H__ +#include + /* * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64 */ @@ -22,30 +24,13 @@ #define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS -/* these are ordered by size to support multi-SoC kernels */ -#if defined CONFIG_SOC_IMX53 -#define MXC_GPIO_IRQS (32 * 7) -#elif defined CONFIG_ARCH_MX2 -#define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_SOC_IMX50 -#define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_ARCH_MX1 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX25 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_SOC_IMX51 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX3 -#define MXC_GPIO_IRQS (32 * 3) -#endif - /* * The next 16 interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use * these. If you need more, increase MXC_BOARD_IRQS, but keep it * within sensible limits. */ -#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS) +#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + ARCH_NR_GPIOS) #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 #define MXC_BOARD_IRQS 80