From: Adrian Schmutzler Date: Mon, 25 Mar 2019 17:46:26 +0000 (+0100) Subject: ath79: Add support for TP-Link CPE210 v2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=141698ce8fbc52d253c9207ef46b3630a0870567;p=openwrt%2Fstaging%2Fluka.git ath79: Add support for TP-Link CPE210 v2 This PR adds support for a popular low-cost 2.4GHz N based AP Specifications: - SoC: Qualcomm Atheros QCA9533 (650MHz) - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 2.4GHz N based built into SoC 2x2 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 This is based on the support patch for the identical CPE210 v3 by Mario Schroen . Tested-by: Adrian Schmutzler Signed-off-by: Adrian Schmutzler [renamed dtsi filename] Signed-off-by: Petr Štetiar --- diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index 47fac18281..af26425da2 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -123,6 +123,7 @@ tplink,archer-c6-v2) ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3C" ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02" ;; +tplink,cpe210-v2|\ tplink,cpe210-v3) ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" ucidef_set_rssimon "wlan0" "200000" "1" diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 1041af561e..fbf15e4ed8 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -19,6 +19,7 @@ ath79_setup_interfaces() pcs,cap324|\ pisen,wmm003n|\ pqi,air-pen|\ + tplink,cpe210-v2|\ tplink,cpe210-v3|\ tplink,re350k-v1|\ tplink,re450-v2|\ diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe210-v2.dts b/target/linux/ath79/dts/qca9533_tplink_cpe210-v2.dts new file mode 100644 index 0000000000..e8273ba249 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_tplink_cpe210-v2.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "qca9533_tplink_cpe210.dtsi" + +/ { + compatible = "tplink,cpe210-v2", "qca,qca9533"; + model = "TP-LINK CPE210 v2"; +}; diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 92d811f10b..e3a0abeb5f 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -109,6 +109,19 @@ define Device/tplink_archer-c7-v5 endef TARGET_DEVICES += tplink_archer-c7-v5 +define Device/tplink_cpe210-v2 + $(Device/tplink-safeloader) + ATH_SOC := qca9533 + IMAGE_SIZE := 7680k + DEVICE_TITLE := TP-Link CPE210 v2 + TPLINK_BOARD_ID := CPE210V2 + DEVICE_PACKAGES := rssileds + LOADER_TYPE := elf + KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header -O + SUPPORTED_DEVICES += cpe210-v2 +endef +TARGET_DEVICES += tplink_cpe210-v2 + define Device/tplink_cpe210-v3 $(Device/tplink-safeloader) ATH_SOC := qca9533