From: Stanislaw Gruszka Date: Thu, 29 Aug 2019 11:29:59 +0000 (+0200) Subject: Revert "rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band" X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=13fa451568ab9e8b3074ef741477c7938c713c42;p=openwrt%2Fstaging%2Fblogic.git Revert "rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band" This reverts commit 9ad3b55654455258a9463384edb40077439d879f. As reported by Sergey: "I got some problem after upgrade kernel to 5.2 version (debian testing linux-image-5.2.0-2-amd64). 5Ghz client stopped to see AP. Some tests with 1metre distance between client-AP: 2.4Ghz -22dBm, for 5Ghz - 53dBm !, for longer distance (8m + walls) 2.4 - 61dBm, 5Ghz not visible." It was identified that rx signal level degradation was caused by 9ad3b5565445 ("rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"). So revert this commit. Cc: # v5.1+ Reported-and-tested-by: Sergey Maranchuk Signed-off-by: Stanislaw Gruszka Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c index 28e2de04834e..f1cdcd61c54a 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -4242,24 +4242,18 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, switch (rt2x00dev->default_ant.rx_chain_num) { case 3: /* Turn on tertiary LNAs */ - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, - rf->channel > 14); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, - rf->channel <= 14); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1); /* fall-through */ case 2: /* Turn on secondary LNAs */ - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, - rf->channel > 14); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, - rf->channel <= 14); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); /* fall-through */ case 1: /* Turn on primary LNAs */ - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, - rf->channel > 14); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, - rf->channel <= 14); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); break; }