From: Chukun Pan Date: Sat, 17 Feb 2024 15:15:39 +0000 (+0800) Subject: qualcommax: ipq60xx: set PHY mode to psgmii for port 5 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1388444f9b1cac5e25d500e29b3d617cfed2729e;p=openwrt%2Fstaging%2Fpepe2k.git qualcommax: ipq60xx: set PHY mode to psgmii for port 5 The port 5 of most ipq60xx devices is connected to qca8075, a few are connected to qca8081. So assume that the default connection is qca8075 and set the phy mode to psgmii. Signed-off-by: Chukun Pan --- diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-ess.dtsi b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-ess.dtsi index ad4357bb37..0965003142 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-ess.dtsi +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-ess.dtsi @@ -501,7 +501,7 @@ reg = <0x0 0x3a001800 0x0 0x200>; qcom,mactype = <0>; local-mac-address = [000000000000]; - phy-mode = "sgmii"; + phy-mode = "psgmii"; status = "disabled"; }; };