From: Tomasz Maciej Nowak <tmn505@gmail.com>
Date: Thu, 17 Dec 2020 16:24:27 +0000 (+0100)
Subject: ath79: airtight c-75: use second flash chip
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=13581a5fa7ed09aa04393d496f44d0bf068e3024;p=openwrt%2Fstaging%2Fthess.git

ath79: airtight c-75: use second flash chip

The flash capacity is divided in two flash chips and currently only
first is used. Increase available space for OpenWrt by additional 16 MiB
using mtd-concat driver. Because U-Boot might not be able to load kernel
image spanned through two flash chips, the size of kernel is limited
to space available on first first chip.

Cc: Vladimir Georgievsky <vladimir.georgievsky@yahoo.com>
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
---

diff --git a/target/linux/ath79/dts/qca9550_airtight_c-75.dts b/target/linux/ath79/dts/qca9550_airtight_c-75.dts
index 566aa6aef6..1bdbc86156 100644
--- a/target/linux/ath79/dts/qca9550_airtight_c-75.dts
+++ b/target/linux/ath79/dts/qca9550_airtight_c-75.dts
@@ -41,6 +41,23 @@
 			linux,default-trigger = "phy1tpt";
 		};
 	};
+
+	virtual_flash {
+		compatible = "mtd-concat";
+		devices = <&concat0 &concat1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x1f90000>;
+				compatible = "denx,uimage";
+			};
+		};
+	};
 };
 
 &eth0 {
@@ -118,10 +135,9 @@
 				read-only;
 			};
 
-			partition@60000 {
-				label = "firmware";
+			concat0: partition@60000 {
+				label = "reserved1";
 				reg = <0x060000 0xf90000>;
-				compatible = "denx,uimage";
 			};
 
 			art: partition@ff0000 {
@@ -142,8 +158,8 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			partition@0 {
-				label = "opt";
+			concat1: partition@0 {
+				label = "reserved2";
 				reg = <0x0 0x1000000>;
 			};
 		};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index baaea00c30..4d181245a6 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -246,7 +246,8 @@ define Device/airtight_c-75
   DEVICE_ALT1_VENDOR := WatchGuard
   DEVICE_ALT1_MODEL := AP320
   DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct kmod-usb2
-  IMAGE_SIZE := 15936k
+  IMAGE_SIZE := 32320k
+  KERNEL_SIZE := 15936k
 endef
 TARGET_DEVICES += airtight_c-75