From: Chuncheng Chen Date: Tue, 14 Jun 2022 06:11:52 +0000 (+0800) Subject: ramips: add support for ASUS RT-AX53U X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1320a78aab07f0efb333aa7b011e3fc560b9ae68;p=openwrt%2Fstaging%2Fblocktrron.git ramips: add support for ASUS RT-AX53U Specifications: - Device: ASUS RT-AX53U - SoC: MT7621AT - Flash: 128MB - RAM: 256MB - Switch: 1 WAN, 3 LAN (10/100/1000 Mbps) - WiFi: MT7905 2x2 2.4G + MT7975 2x2 5G - Ports: USB 3.0 - LEDs: 1x POWER (blue, configurable) 3x LAN (blue, configurable) 1x WAN (blue, configurable) 1x USB (blue, not configurable) 1x 2.4G (blue, not configurable) 1x 5G (blue, not configurable) Flash by U-Boot TFTP method: - Configure your PC with IP 192.168.1.2 - Set up TFTP server and put the factory.bin image on your PC - Connect serial port(rate:115200) and turn on AP, then interrupt "U-Boot Boot Menu" by hitting any key Select "2. Upgrade firmware" Press enter when show "Run firmware after upgrading? (Y/n):" Select 0 for TFTP method Input U-Boot's IP address: 192.168.1.1 Input TFTP server's IP address: 192.168.1.2 Input IP netmask: 255.255.255.0 Input file name: openwrt-ramips-mt7621-asus_rt-ax53u-squashfs-factory.bin - Restart AP aftre see the log "Firmware upgrade completed!" Signed-off-by: Chuncheng Chen (replaced led label, added key-* prefix to buttons, added note about BBT) Signed-off-by: Christian Lamparter (cherry picked from commit 8c00fd9b4519bf0ef8fb3470a6df421b9f38c03c) --- diff --git a/target/linux/ramips/dts/mt7621_asus_rt-ax53u.dts b/target/linux/ramips/dts/mt7621_asus_rt-ax53u.dts new file mode 100644 index 0000000000..790f6cecb5 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_asus_rt-ax53u.dts @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include +#include + +/ { + compatible = "asus,rt-ax53u", "mediatek,mt7621-soc"; + model = "ASUS RT-AX53U"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + label-mac-device = &gmac0; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + bootargs-override = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_power: led-0 { + color = ; + function = LED_FUNCTION_POWER; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + key-restart { + label = "reset"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-wps { + label = "wps"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0xe0000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0xe0000 0x100000>; + read-only; + }; + + factory: partition@1e0000 { + label = "factory"; + reg = <0x1e0000 0x100000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_4: macaddr@4 { + reg = <0x4 0x6>; + }; + }; + + factory2: partition@2e0000 { + label = "factory2"; + reg = <0x2e0000 0x100000>; + read-only; + }; + + partition@3e0000 { + label = "kernel"; + reg = <0x3e0000 0x400000>; + }; + + partition@7e0000 { + label = "ubi"; + reg = <0x7e0000 0x2e00000>; + }; + + partition@35e0000 { + label = "firmware2"; + reg = <0x35e0000 0x3200000>; + }; + + /* Last 8M possibly store the bad block table */ + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "wan"; + }; + + port@1 { + status = "okay"; + label = "lan1"; + }; + + port@2 { + status = "okay"; + label = "lan2"; + }; + + port@3 { + status = "okay"; + label = "lan3"; + }; + + port@4 { + status = "okay"; + label = "lan4"; + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "uart2", "uart3", "jtag", "wdt"; + function = "gpio"; + }; +}; + diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 30442175bf..7b78d9fdcc 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -227,6 +227,23 @@ define Device/asus_rt-n56u-b1 endef TARGET_DEVICES += asus_rt-n56u-b1 +define Device/asus_rt-ax53u + $(Device/dsa-migration) + DEVICE_VENDOR := ASUS + DEVICE_MODEL := RT-AX53U + IMAGE_SIZE := 51200k + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_SIZE := 4096k + IMAGES += factory.bin + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \ + check-size + DEVICE_PACKAGES := kmod-mt7915e kmod-usb3 uboot-envtools +endef +TARGET_DEVICES += asus_rt-ax53u + define Device/beeline_smartbox-flash $(Device/dsa-migration) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index c39a23409a..1744c894c4 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -53,6 +53,7 @@ platform_do_upgrade() { ampedwireless,ally-r1900k|\ asus,rt-ac65p|\ asus,rt-ac85p|\ + asus,rt-ax53u|\ beeline,smartbox-flash|\ dlink,dir-1960-a1|\ dlink,dir-2640-a1|\