From: Mark Mentovai Date: Mon, 6 Jun 2022 18:53:31 +0000 (-0400) Subject: failsafe: fix console failsafe shell X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1310e4f1aecef6c2c1b68227216ba7cc04006002;p=openwrt%2Fstaging%2Fthess.git failsafe: fix console failsafe shell When running a failsafe shell on a console, job control was unavailable, and ^C did not function correctly. This change invokes console failsafe shells via `setsid`, making them session leaders and allowing them to claim controlling terminals, which makes job control function properly. To support this, the busybox `setsid` utility is enabled. This has a minimal 149-byte size impact on a test x86_64 squashfs rootfs image. ^C was ignored in subprocesses of failsafe shells: it was not possible to ^C out of a program that would not exit on its own, such as many typical `ping` invocations. As job control was unavailable, it was not possible to suspend these subprocesses either, causing a hung program to tie up a console indefinitely, unless another means to signal the program was available. This was caused by SIGINT being placed at disposition SIG_IGN by the shell running preinit, which it did because the console shell was executed asynchronously with &. That disposition was inherited by the console shell and its subprocesses, generally causing ^C to have no effect. As there is no way in busybox `ash` to reset the disposition of a signal already ignored at shell entry, and no apparent way to avoid SIGINT being placed at SIG_IGN when & is used in preinit, an alternative construct is needed. Now, `start-stop-daemon` is used to start (-S) the console failsafe shell in the background (-b). This approach does not alter SIGINT, allowing the console shell to be started with that signal's handling intact, and normal ^C processing to occur. busybox `ash` has some behaviors conditional on SHLVL, and while the console shells ought to run at SHLVL=1, they were not by virtue of being started by the shell-based preinit system. Additionally, a variety of detritus was present in the console shell's environment, carried over from preinit. These conditions are corrected by running the console shell via `env -i` to clear the environment and establish a minimum and correct set of environment variables for operation, in the same manner as `login`. HOME is not explicitly set, because it's addressed in /etc/profile. For non-failsafe console shells when system.@system[0].ttylogin = 0, `login -f root` achieves a similar effect. (`login` already started non-failsafe console shells when ttylogin = 1 and behaved correctly. This brings the ttylogin = 0 case to parity.) Note that even `login -f` is somewhat undesirable for failsafe shells because it requires a viable /etc/passwd, hence the `env -i` construct in that case. The TERM environment variable from the preinit environment, with value "linux", would rarely be correct for serial consoles. Now, the preinit TERM value is preserved (or set to "linux" if unset) only when the console is /dev/console or /dev/tty[0-9]*. Otherwise, it will be set to a safe default appropriate for serial consoles, "vt102", as used for serial consoles by busybox init. This "linux"/"vt102" TERM setting is also duplicated for non-failsafe console shells. This also indicates failsafe mode by showing "- failsafe -" on all consoles (not just the last-defined one). It sets a hostname of "OpenWrt-failsafe" in failsafe mode which is rendered in the shell's prompt as a reminder of the mode during interactive failsafe use. Previously, no hostname was set, which resulted in the kernel-default hostname, "(none)", appearing in failsafe shell prompts. Signed-off-by: Mark Mentovai Link: https://github.com/openwrt/openwrt/pull/16113 Signed-off-by: Robert Marko --- diff --git a/package/base-files/files/lib/preinit/10_indicate_failsafe b/package/base-files/files/lib/preinit/10_indicate_failsafe index 7bf5e029e4..8c950bff74 100644 --- a/package/base-files/files/lib/preinit/10_indicate_failsafe +++ b/package/base-files/files/lib/preinit/10_indicate_failsafe @@ -9,9 +9,14 @@ indicate_failsafe_led () { indicate_failsafe() { [ "$pi_preinit_no_failsafe" = "y" ] && return - echo "- failsafe -" + local consoles="$(cat /sys/class/tty/console/active)" + [ -n "$consoles" ] || consoles=console + for console in $consoles; do + [ -c "/dev/$console" ] && echo "- failsafe -" >"/dev/$console" + done preinit_net_echo "Entering Failsafe!\n" indicate_failsafe_led + echo OpenWrt-failsafe > /proc/sys/kernel/hostname } boot_hook_add failsafe indicate_failsafe diff --git a/package/base-files/files/lib/preinit/30_failsafe_wait b/package/base-files/files/lib/preinit/30_failsafe_wait index 9ab2e8bd4d..c792089ece 100644 --- a/package/base-files/files/lib/preinit/30_failsafe_wait +++ b/package/base-files/files/lib/preinit/30_failsafe_wait @@ -40,7 +40,7 @@ fs_wait_for_key () { rm -f $keypress_wait } & - local consoles="$(sed -e 's/ /\n/g' /proc/cmdline | grep '^console=' | sed -e 's/^console=//' -e 's/,.*//')" + local consoles="$(cat /sys/class/tty/console/active)" [ -n "$consoles" ] || consoles=console for console in $consoles; do [ -c "/dev/$console" ] || continue @@ -78,6 +78,9 @@ fs_wait_for_key () { keypressed=1 [ "$(cat $keypress_true)" = "true" ] && keypressed=0 + trap - INT + trap - USR1 + rm -f $keypress_true rm -f $keypress_wait rm -f $keypress_sec diff --git a/package/base-files/files/lib/preinit/99_10_failsafe_login b/package/base-files/files/lib/preinit/99_10_failsafe_login index 6f4af3f28b..f72a35ed53 100644 --- a/package/base-files/files/lib/preinit/99_10_failsafe_login +++ b/package/base-files/files/lib/preinit/99_10_failsafe_login @@ -2,14 +2,22 @@ # Copyright (C) 2010 Vertical Communications failsafe_shell() { - local consoles="$(sed -e 's/ /\n/g' /proc/cmdline | grep '^console=' | sed -e 's/^console=//' -e 's/,.*//')" + local consoles="$(cat /sys/class/tty/console/active)" [ -n "$consoles" ] || consoles=console for console in $consoles; do - [ -c "/dev/$console" ] && while true; do - ash --login <"/dev/$console" >"/dev/$console" 2>"/dev/$console" - sleep 1 - done & + case "$console" in + console|tty[0-9]*) + term=${TERM:-linux} + ;; + *) + term=vt102 + ;; + esac + # Running asynchronously via the shell's & would ignore SIGINT, + # breaking ^C. Use start-stop-daemon instead. + [ -c "/dev/$console" ] && start-stop-daemon -Sb -p /dev/null -- env -i ash -c "while true; do setsid -c env -i USER=root LOGNAME=root SHELL=/bin/ash TERM="$term" ash --login <\"/dev/$console\" >\"/dev/$console\" 2>\"/dev/$console\"; sleep 1; done" done + } boot_hook_add failsafe failsafe_shell diff --git a/package/base-files/files/usr/libexec/login.sh b/package/base-files/files/usr/libexec/login.sh index 1fff39c6a0..e2f898e850 100755 --- a/package/base-files/files/usr/libexec/login.sh +++ b/package/base-files/files/usr/libexec/login.sh @@ -1,5 +1,17 @@ #!/bin/sh -[ "$(uci -q get system.@system[0].ttylogin)" = 1 ] || exec /bin/ash --login +[ -t 0 ] && { + tty_dev=$(readlink /proc/self/fd/0) + case "$tty_dev" in + /dev/console|/dev/tty[0-9]*) + export TERM=${TERM:-linux} + ;; + /dev/*) + export TERM=vt102 + ;; + esac +} + +[ "$(uci -q get system.@system[0].ttylogin)" = 1 ] || exec /bin/login -f root exec /bin/login diff --git a/package/utils/busybox/Config-defaults.in b/package/utils/busybox/Config-defaults.in index 515bea3d1d..f88f395e2c 100644 --- a/package/utils/busybox/Config-defaults.in +++ b/package/utils/busybox/Config-defaults.in @@ -1801,7 +1801,7 @@ config BUSYBOX_DEFAULT_FEATURE_SETPRIV_CAPABILITY_NAMES default n config BUSYBOX_DEFAULT_SETSID bool - default n + default y config BUSYBOX_DEFAULT_SWAPON bool default y