From: Gabor Juhos Date: Mon, 8 Apr 2013 12:34:17 +0000 (+0000) Subject: ramips: TEW-691GR.dts fixes X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=130f67210a23e69d867a0d13b8badd92a2560398;p=openwrt%2Fstaging%2Fjow.git ramips: TEW-691GR.dts fixes * fix pinmux settings * remove spi node * add nor-flash node * enable mdio-bus and add phy handle Signed-off-by: Gabor Juhos SVN-Revision: 36276 --- diff --git a/target/linux/ramips/dts/TEW-691GR.dts b/target/linux/ramips/dts/TEW-691GR.dts index 423aa6dc18..4f877323f0 100644 --- a/target/linux/ramips/dts/TEW-691GR.dts +++ b/target/linux/ramips/dts/TEW-691GR.dts @@ -12,9 +12,10 @@ palmbus@10000000 { sysc@0 { - ralink,pinmux = "uartlite", "spi"; + ralink,pinmux = "uartlite"; ralink,gpiomux = "i2c", "jtag"; ralink,uartmux = "gpio"; + ralink,pcimux = "pci-fnc"; ralink,wdtmux = <1>; }; @@ -29,25 +30,20 @@ gpio1: gpio@638 { status = "okay"; }; - - spi@b00 { - status = "okay"; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l6405d"; - reg = <0 0>; - linux,modalias = "m25p80"; - spi-max-frequency = <25000000>; - }; - }; }; ethernet@10100000 { status = "okay"; - ralink,phy-mask = <0x1>; + phy-handle = <&phy0>; phy-mode = "rgmii"; + + mdio-bus { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; }; wmac@10180000 { @@ -55,6 +51,38 @@ ralink,5ghz = <0>; }; + nor-flash@1c000000 { + compatible = "cfi-flash"; + reg = <0x1c000000 0x800000>; + + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x0030000>; + label = "u-boot"; + read-only; + }; + + partition@30000 { + reg = <0x00030000 0x00010000>; + label = "u-boot-env"; + read-only; + }; + + partition@40000 { + reg = <0x00040000 0x00010000>; + label = "factory"; + read-only; + }; + + partition@50000 { + reg = <0x00050000 0x007b0000>; + label = "firmware"; + }; + }; + gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>;