From: Uwe Kleine-König Date: Tue, 25 Mar 2014 14:51:50 +0000 (+0100) Subject: spi: efm32: use $vendor,$device scheme for compatible string X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=12f6dd860cf8bf036c0bec38c00a53da71bcd43a;p=openwrt%2Fstaging%2Fblogic.git spi: efm32: use $vendor,$device scheme for compatible string Wolfram Sang pointed out that "efm32,$device" is non-standard. So use the common scheme and prefix device with "efm32-". The old compatible string is left in place until arch/arm/boot/dts/efm32* is fixed. Signed-off-by: Uwe Kleine-König Acked-by: Wolfram Sang Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt index 25c02ba530da..8f081c96a4fa 100644 --- a/Documentation/devicetree/bindings/spi/efm32-spi.txt +++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt @@ -3,7 +3,7 @@ Required properties: - #address-cells: see spi-bus.txt - #size-cells: see spi-bus.txt -- compatible: should be "efm32,spi" +- compatible: should be "energymicro,efm32-spi" - reg: Offset and length of the register set for the controller - interrupts: pair specifying rx and tx irq - clocks: phandle to the spi clock @@ -15,7 +15,7 @@ Example: spi1: spi@0x4000c400 { /* USART1 */ #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,spi"; + compatible = "energymicro,efm32-spi"; reg = <0x4000c400 0x400>; interrupts = <15 16>; clocks = <&cmu 20>; diff --git a/drivers/spi/spi-efm32.c b/drivers/spi/spi-efm32.c index fdb6fce0530b..4a5a359dafca 100644 --- a/drivers/spi/spi-efm32.c +++ b/drivers/spi/spi-efm32.c @@ -471,6 +471,9 @@ static int efm32_spi_remove(struct platform_device *pdev) static const struct of_device_id efm32_spi_dt_ids[] = { { + .compatible = "energymicro,efm32-spi", + }, { + /* doesn't follow the "vendor,device" scheme, don't use */ .compatible = "efm32,spi", }, { /* sentinel */